Ignore:
Timestamp:
02/14/19 15:35:36 (5 years ago)
Author:
jgipsl
Message:

Update config:

  • Before the component ATM was used for DYNAMCIO-LMDZphysics together. Now they have been seperated in 2 components: ICO for the icosahedral part which is here DYNAMCIO. ATM is kept for LMDZ phyiscs. Note that when running without DYNMACIO, the component ICO is not present and the component ATM represents both LMDZ dynamics and physics.
  • lmdz.driver and lmdz.card are copied from LMDZOR_v6.2. Small changes are done to work with or without DYNAMCIO.
  • .def files for LMDZ are copied from LMDZOR_v6.2
File:
1 moved

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v7/ICOLMDZOR_v7/GENERAL/DRIVER/dynamico.driver

    r4280 r4281  
    11#!/bin/ksh 
    22#----------------------------------------------------------------- 
    3 function ATM_Initialize 
     3function ICO_Initialize 
    44{ 
    5     IGCM_debug_PushStack "ATM_Initialize" 
     5    IGCM_debug_PushStack "ICO_Initialize" 
    66 
    7     ##- Horizontal resolution read from dynamicolmdz.card 
    8     if [ ! X${dynamicolmdz_UserChoices_RESOL_NBP} = X ] ; then 
    9         RESOL_NBP=${dynamicolmdz_UserChoices_RESOL_NBP} 
     7    ##- Horizontal resolution read from dynamic.card 
     8    if [ ! X${dynamico_UserChoices_RESOL_NBP} = X ] ; then 
     9        RESOL_NBP=${dynamico_UserChoices_RESOL_NBP} 
    1010    else 
    1111        # Set default resolution 
    … …  
    1313    fi 
    1414 
    15     ##- Horizontal resolution read from dynamicolmdz.card 
    16     if [ ! X${dynamicolmdz_UserChoices_RESOL_LLM} = X ] ; then 
    17         RESOL_LLM=${dynamicolmdz_UserChoices_RESOL_LLM} 
     15    ##- Horizontal resolution read from dynamico.card 
     16    if [ ! X${dynamico_UserChoices_RESOL_ATM_Z} = X ] ; then 
     17        RESOL_ATM_Z=${dynamico_UserChoices_RESOL_ATM_Z} 
    1818    else 
    19         # Set default resolution 
    20         RESOL_LLM=79 
     19        # RESOL_ATM_Z is not set in dynamico.card but this is needed 
     20        IGCM_debug_Exit "RESOL_ATM_Z must be set in dynamico.card UserSection" 
     21        IGCM_debug_Verif_Exit 
    2122    fi 
    2223 
    23     ##- LMDZ physics version 
    24     ##  Read LMDZ_Physics option in lmdz.card, if not present take default value NPv6.1.3  
    25     if [ ! X${dynamicolmdz_UserChoices_LMDZ_Physics} = X ] ; then 
    26         LMDZ_Physics=${dynamicolmdz_UserChoices_LMDZ_Physics} 
    27     else 
    28         LMDZ_Physics=NPv6.0.11 
    29     fi 
    30     echo LMDZ physics version : ${LMDZ_Physics} 
    31  
    32  
    33     IGCM_debug_PopStack "ATM_Initialize" 
     24    IGCM_debug_PopStack "ICO_Initialize" 
    3425} 
    3526 
    3627#----------------------------------------------------------------- 
    37 function ATM_Update 
     28function ICO_Update 
    3829{ 
    39     IGCM_debug_PushStack "ATM_Update" 
    40  
    41     ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def 
    42     if [ ${CumulPeriod} -eq 1 ] ; then 
    43     IGCM_comp_modifyDefFile blocker run.def raz_date  1 
    44     else 
    45     IGCM_comp_modifyDefFile blocker run.def raz_date  0 
    46     fi 
    47  
    48     ##-- Calendar type for LMDZ and create_etat0_limit 
    49     case ${config_UserChoices_CalendarType} in 
    50         leap|gregorian) 
    51         IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;; 
    52         noleap) 
    53         IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;; 
    54         360d) 
    55         IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;; 
    56         *) 
    57         IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;; 
    58     esac 
    59      
    60     IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay} 
    61     IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear} 
     30    IGCM_debug_PushStack "ICO_Update" 
    6231 
    6332    IGCM_comp_modifyDefFile blocker run_icosa.def run_length $(( ${PeriodLengthInDays} * 86400 )) 
    … …  
    7039      IGCM_debug_Print 1 "Maximum nubmer of MPI for resolution nbp=${RESOL_NBP} is $(( ${RESOL_NBP} * ${RESOL_NBP} / 10 ))" 
    7140    else 
    72       IGCM_debug_Print 1 "nbp=${RESOL_NBP} is set in dynamicolmdz.card" 
    73       IGCM_debug_Exit "This resolution has not been prepared in dynamicolmdz.driver"  
     41      IGCM_debug_Print 1 "nbp=${RESOL_NBP} is set in dynamico.card" 
     42      IGCM_debug_Exit "This resolution has not been prepared in dynamico.driver"  
    7443      IGCM_debug_Verif_Exit 
    7544    fi 
    7645 
    77     if [ X${dynamicolmdz_UserChoices_Aquaplanet} == Xy ] ; then 
    78       IGCM_comp_modifyDefFile nonblocker earth_const.def solarlong0   1000.0 
    79       IGCM_comp_modifyDefFile nonblocker config.def      R_ecc        0 
    80       IGCM_comp_modifyDefFile nonblocker config.def      read_climoz  -1 
    81       IGCM_comp_modifyDefFile nonblocker run_icosa.def   etat0        held_suarez 
    82     else 
    83       IGCM_comp_modifyDefFile nonblocker earth_const.def solarlong0   -9999.999 
    84       IGCM_comp_modifyDefFile nonblocker config.def      R_ecc        0.016715 
    85       IGCM_comp_modifyDefFile nonblocker config.def      read_climoz  1 
    86 #      IGCM_comp_modifyDefFile nonblocker run_icosa.def   etat0        database 
    87       IGCM_comp_modifyDefFile nonblocker run_icosa.def   etat0        start_file  
    88     fi 
    8946 
    90  
    91  
    92     # Add include of context xml files for LMDZ and DYNAMICO in iodef.xml 
     47    # Add include of context xml files for DYNAMICO in iodef.xml 
    9348    # In iodef.xml add on the next line after "COMPONENT CONTEXT" 
    94     echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp 
    9549    echo '<context id="icosagcm" src="./context_dynamico.xml"/>' >> add.tmp 
    9650 
    97     # Add inclusion of file context_input_lmdz.xml if this file exists 
    98     if [ -f context_input_lmdz.xml ] ; then 
    99         echo '<context id="LMDZ" src="./context_input_lmdz.xml"/>' >> add.tmp 
    100     fi 
    10151    # Add inclusion of file context_input_dynamico.xml if this file exists 
    10252    if [ -f context_input_dynamico.xml ] ; then 
    … …  
    10454    fi 
    10555 
    106  
    10756    # Include xml files for output configuration if running with workflow CMIP6 
    10857    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then 
    109       echo '<context id="LMDZ" src="./ping_lmdz.xml"/>' >> add.tmp 
    110       echo '<context id="LMDZ" src="./dr2xml_lmdz.xml"/>' >> add.tmp 
     58      if [ -f ping_dynamico.xml ] ; then 
     59        echo '<context id="icosagcm" src="./ping_dynamico.xml"/>' >> add.tmp 
     60        echo '<context id="icosagcm" src="./dr2xml_dynamico.xml"/>' >> add.tmp 
     61      fi 
    11162    fi 
    11263    cp iodef.xml iodef.xml.tmp 
    … …  
    11667    # Add a Long Name as global attribute in output files if LongName is set in config.card 
    11768    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then 
    118       listfile=$(ls file_def*lmdz.xml) 
     69      listfile=$(ls file_def*dynamico.xml) 
    11970      echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp 
    12071      for file in ${listfile} ; do 
    … …  
    12778    fi 
    12879 
    129     # Do modifications for LMDZ output according to settings in dynamicolmdz.card 
    130     if [ ! X${dynamicolmdz_UserChoices_output_histmth_lmdz} = X ]; then  
    131         IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${dynamicolmdz_UserChoices_output_histmth_lmdz} 
    132     else 
    133         IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled FALSE 
    134     fi 
    135  
    136     if [ ! X${dynamicolmdz_UserChoices_output_histday_lmdz} = X ]; then  
    137         IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${dynamicolmdz_UserChoices_output_histday_lmdz} 
    138     else 
    139         IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled FALSE 
    140     fi 
    141  
    142     if [ ! X${dynamicolmdz_UserChoices_output_histhf_lmdz} = X ]; then  
    143         IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${dynamicolmdz_UserChoices_output_histhf_lmdz} 
    144     else 
    145         IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled FALSE 
    146     fi 
    147  
    148     if [ ! X${dynamicolmdz_UserChoices_output_histmthNMC_lmdz} = X ]; then  
    149         IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${dynamicolmdz_UserChoices_output_histmthNMC_lmdz} 
    150     else 
    151         IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled FALSE 
    152     fi 
    153  
    154     if [ ! X${dynamicolmdz_UserChoices_output_histdayNMC_lmdz} = X ]; then  
    155         IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${dynamicolmdz_UserChoices_output_histdayNMC_lmdz} 
    156     else 
    157         IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled FALSE 
    158     fi 
    159  
    160     if [ ! X${dynamicolmdz_UserChoices_output_histhfNMC_lmdz} = X ]; then  
    161         IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${dynamicolmdz_UserChoices_output_histhfNMC_lmdz} 
    162     else 
    163         IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled FALSE 
    164     fi 
    165  
    166     if [ ! X${dynamicolmdz_UserChoices_output_histstn_lmdz} = X ]; then  
    167         IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${dynamicolmdz_UserChoices_output_histstn_lmdz} 
    168     else 
    169         IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled FALSE 
    170     fi 
    171  
    172     if [ ! X${dynamicolmdz_UserChoices_output_histstrataer_lmdz} = X ]; then  
    173         IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled ${dynamicolmdz_UserChoices_output_histstrataer_lmdz} 
    174     else 
    175         IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled FALSE 
    176     fi 
    177  
    178  
    179  
    180     IGCM_debug_PopStack "ATM_Update" 
     80    IGCM_debug_PopStack "ICO_Update" 
    18181} 
    18282 
    18383#----------------------------------- 
    184 function ATM_Finalize 
     84function ICO_Finalize 
    18585{ 
    186     IGCM_debug_PushStack "ATM_Finalize" 
     86    IGCM_debug_PushStack "ICO_Finalize" 
    18787 
    188     IGCM_debug_PopStack "ATM_Finalize" 
     88    IGCM_debug_PopStack "ICO_Finalize" 
    18989} 
    19090 
Note: See TracChangeset for help on using the changeset viewer.