Changeset 4281 for CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZ/clim_noleap/COMP/lmdz.card

Timestamp:

02/14/19 15:35:36 (5 years ago)

Author:

jgipsl

Message:

Update config:

• Before the component ATM was used for DYNAMCIO-LMDZphysics together. Now they have been seperated in 2 components: ICO for the icosahedral part which is here DYNAMCIO. ATM is kept for LMDZ phyiscs. Note that when running without DYNMACIO, the component ICO is not present and the component ATM represents both LMDZ dynamics and physics.

• lmdz.driver and lmdz.card are copied from LMDZOR_v6.2. Small changes are done to work with or without DYNAMCIO.

• .def files for LMDZ are copied from LMDZOR_v6.2

File:

• CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZ/clim_noleap/COMP/lmdz.card (copied) (copied from CONFIG/UNIFORM/v6/LMDZOR_v6.2/EXPERIMENTS/LMDZOR/clim_pdControl/COMP/lmdz.card) (7 diffs)

CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZ/clim_noleap/COMP/lmdz.card

@@ -5 +5 @@
 # Physics package to use :
 # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
-# LMDZ_Physics=NPv3.2 for an early version of the new physics, to be used with LMDZ5/trunk revision 1554 or later
-# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
-# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
-# LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later
-# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
-# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
-# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
-# LMDZ_Physics=NPv6.1.3 as NPv6.1 but allows tau_gl to be modified
 LMDZ_Physics=NPv6.1.3
 
@@ -31 +23 @@
 tau_gl=2.
 
-# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
-ByPass_hgardfou_teta=n
-
-# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
-ByPass_hgardfou_mats=n
-
 # Set OutLevel to choose the level of output for LMDZ
 # OutLevel=low/medium/high
@@ -57 +43 @@
 
 [InitialStateFiles]
-List=   (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\
-        (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/startphy_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc) 
+# start.nc and startphy.nc are both set in dynamico.card to easier insure coherence of the files
+List=()
 
 [BoundaryFiles]
@@ -65 +51 @@
 # With CMIP6 aerosols version 1
 # With 3D ozone
-ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
-            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
-            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
-            (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_365d/limit_1979_2008_clim.nc, limit.nc),\
+ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/144x142/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc),\
-            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
-            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc)
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc)
 
 [SmoothFiles]
@@ -78 +63 @@
 [ParametersFiles]
 List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
-        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
         (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
         (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
@@ -86 +70 @@
         (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
         (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
-        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
         (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
         (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
@@ -104 +87 @@
 
 [RestartFiles]
-List=   (restart.nc, restart.nc, start.nc), \
-        (restartphy.nc, restartphy.nc,  startphy.nc)
+List=   (restartphy.nc, restartphy.nc,  startphy.nc)
 
 [OutputText]
-List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+List=   (physiq.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt)
 
 [OutputFiles]