| 1 | #- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $ |
|---|
| 2 | [Compatibility] |
|---|
| 3 | libIGCM=1.0 |
|---|
| 4 | |
|---|
| 5 | [UserChoices] |
|---|
| 6 | # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) |
|---|
| 7 | LMDZ_10m_winds=y |
|---|
| 8 | # heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie |
|---|
| 9 | feedb=0 |
|---|
| 10 | #coupled model with ORCH |
|---|
| 11 | #if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card |
|---|
| 12 | CoupOrchInca=n |
|---|
| 13 | #active or not chemistry flux in output |
|---|
| 14 | calcul_flux=n |
|---|
| 15 | #choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft) |
|---|
| 16 | flag_plane=1 |
|---|
| 17 | #choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) |
|---|
| 18 | #be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) |
|---|
| 19 | emi_interp_time=1 |
|---|
| 20 | xios_read=y |
|---|
| 21 | |
|---|
| 22 | |
|---|
| 23 | # Specify output frequency for output files |
|---|
| 24 | # you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it |
|---|
| 25 | # if you choose 1d the file will be store in CHM/Output/DA |
|---|
| 26 | # if you choose 1mo the file will be store in CHM/Output/MO |
|---|
| 27 | # if you choose another frequency, the file will be store in CHM/Output/DA by default |
|---|
| 28 | output_frequency_emi=1d |
|---|
| 29 | output_frequency_species=1d |
|---|
| 30 | output_frequency_forcage=1d |
|---|
| 31 | output_frequency_aero=1d |
|---|
| 32 | output_frequency_veget=NONE |
|---|
| 33 | |
|---|
| 34 | [InitialStateFiles] |
|---|
| 35 | List= ($CCCSCRATCHDIR/IGCM_OUT/LMDZORINCA/TEST/DUSS/DUSSdevreadxios.1/CHM/Restart/DUSSdevreadxios.1_20060101_chem_restart.nc, chem_start.nc) |
|---|
| 36 | |
|---|
| 37 | [BoundaryFiles] |
|---|
| 38 | List=( ) |
|---|
| 39 | |
|---|
| 40 | ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc , landuse.nc ),\ |
|---|
| 41 | (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc , npp.nc ),\ |
|---|
| 42 | (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc , dustEC.nc )\ |
|---|
| 43 | (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) |
|---|
| 44 | |
|---|
| 45 | |
|---|
| 46 | |
|---|
| 47 | [ParametersFiles] |
|---|
| 48 | List= (${SUBMIT_DIR}/PARAM/inca.def, .),\ |
|---|
| 49 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .) ,\ |
|---|
| 50 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .) ,\ |
|---|
| 51 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .) ,\ |
|---|
| 52 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_DUSS_inca.xml, context_start_inca.xml) ,\ |
|---|
| 53 | (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\ |
|---|
| 54 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \ |
|---|
| 55 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \ |
|---|
| 56 | (${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat) |
|---|
| 57 | |
|---|
| 58 | |
|---|
| 59 | |
|---|
| 60 | [RestartFiles] |
|---|
| 61 | # List restart that have to be saved/restored each loop (file out, saved, and in) : |
|---|
| 62 | List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\ |
|---|
| 63 | (chem_restart.nc, chem_restart.nc, chem_start.nc) |
|---|
| 64 | |
|---|
| 65 | [OutputText] |
|---|
| 66 | List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out) |
|---|
| 67 | |
|---|
| 68 | [OutputFiles] |
|---|
| 69 | List= (inca1d_aero.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc , Post_1D_inca_aero ),\ |
|---|
| 70 | (inca1d_reacflux.nc, ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc, NONE ),\ |
|---|
| 71 | (inca1d_forcage.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc , Post_1D_inca_forcage ),\ |
|---|
| 72 | (inca1d_veget.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc , Post_1D_inca_veget ),\ |
|---|
| 73 | (inca1mo_aero.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc , NONE ),\ |
|---|
| 74 | (inca1mo_reacflux.nc, ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc, NONE ),\ |
|---|
| 75 | (inca1mo_forcage.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc , NONE ),\ |
|---|
| 76 | (inca1mo_veget.nc , ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc , NONE ) |
|---|
| 77 | |
|---|
| 78 | |
|---|
| 79 | [Post_1D_inca_aero] |
|---|
| 80 | Patches= () |
|---|
| 81 | GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area) |
|---|
| 82 | TimeSeriesVars2D = (od550ssss, od550ssas,od550sscs,od550dustci, loaddustci, loadsscs, loadssas,loadssss, emidustci, emissas, emissss, emisscs) |
|---|
| 83 | ChunckJob2D = NONE |
|---|
| 84 | TimeSeriesVars3D = () |
|---|
| 85 | ChunckJob3D = NONE |
|---|
| 86 | Seasonal=OFF |
|---|
| 87 | |
|---|
| 88 | |
|---|
| 89 | [Post_1D_inca_forcage] |
|---|
| 90 | Patches= () |
|---|
| 91 | GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area) |
|---|
| 92 | TimeSeriesVars2D = (SWTOAAS_AER,SWTOAAS_DUST,SWTOAAS_SS) |
|---|
| 93 | ChunckJob2D = NONE |
|---|
| 94 | TimeSeriesVars3D = () |
|---|
| 95 | ChunckJob3D = NONE |
|---|
| 96 | Seasonal=OFF |
|---|
| 97 | |
|---|
| 98 | |
|---|
| 99 | [Post_1D_inca_veget] |
|---|
| 100 | Patches= () |
|---|
| 101 | GatherWithInternal = (lon, lat, veget, time_counter) |
|---|
| 102 | TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono) |
|---|
| 103 | ChunckJob2D = NONE |
|---|
| 104 | TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal) |
|---|
| 105 | ChunckJob3D = NONE |
|---|
| 106 | Seasonal=OFF |
|---|
