source: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card.xios @ 5919

Last change on this file since 5919 was 5919, checked in by acosce, 3 years ago

add new flag in inca "xios_read" allow to read input file with xios (xios_read=y) (files on dynamical lmdz grid) or with netcdf (xios_read=n) (files on physical lmdz grid)
add for each chemistry configuration a card inca.Card.xios with files used by xios_read=y (by default xios_read=n on inca.card)

File size: 7.0 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
7LMDZ_10m_winds=y
8# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
9feedb=0
10#coupled model with ORCH
11#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
12CoupOrchInca=n
13#active or not chemistry flux in output
14calcul_flux=n
15#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
16flag_plane=1
17#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
18#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc )
19emi_interp_time=1
20xios_read=y
21
22
23# Specify output frequency for output files
24# you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
25# if you choose 1d the file will be store in CHM/Output/DA
26# if you choose 1mo the file will be store in CHM/Output/MO
27# if you choose another frequency, the file will be store in CHM/Output/DA by default
28output_frequency_emi=1d
29output_frequency_species=1d
30output_frequency_forcage=1d
31output_frequency_aero=1d
32output_frequency_veget=NONE
33
34[InitialStateFiles]
35List= ($CCCSCRATCHDIR/IGCM_OUT/LMDZORINCA/TEST/DUSS/DUSSdevreadxios.1/CHM/Restart/DUSSdevreadxios.1_20060101_chem_restart.nc, chem_start.nc)
36#List= ()
37
38#       
39#[BoundaryFiles]
40#List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_phy.nc,   sflx_ANT.nc         ),\
41#     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_phy.nc,   sflx_BBG.nc         ),\
42#     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
43#
44#ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc                           ,   npp.nc          )\
45#            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
46#            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
47#            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
48#           (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc                        ,   landuse.nc      )\
49#            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt                        ,   rhvEC.txt       )\
50#            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt                        ,   wthEC.txt       )\
51#            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt                        ,   clyEC.txt       )\
52#            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat                          ,   wth.dat         )\
53#            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat                          ,   cly.dat         )\
54#           (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat                           ,   rhv.dat         )\
55#           (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
56#
57#
58#
59#[ParametersFiles]
60#List=  (${SUBMIT_DIR}/PARAM/inca.def, .),\
61#       (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
62#       (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
63#       (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
64#       (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \
65#       (${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
66#
67
68
69       
70[BoundaryFiles]
71List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc  ,   sflx_ANT_LR.nc      ),\
72     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc  ,   sflx_BBG_LR.nc      ),\
73     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
74
75ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc            ,   sflx_GHG_LR.nc      ),\
76            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc            ,   sflx_NAT_LR.nc      ),\
77            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc           ,   sflx_MISC_LR.nc     ),\
78            (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc                              ,   landuse.nc          ),\
79            (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc                                       ,   npp.nc              ),\
80            (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc                                    ,   dustEC.nc)\
81            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
82
83
84
85[ParametersFiles]
86List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
87        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
88        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
89        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
90        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
91        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_DUSS_inca.xml, context_start_inca.xml)   ,\
92        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
93        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
94        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \
95        (${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
96
97
98
99[RestartFiles]
100# List restart that have to be saved/restored each loop (file out, saved, and in) :
101List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
102      (chem_restart.nc, chem_restart.nc, chem_start.nc)
103
104[OutputText]
105List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
106
107[OutputFiles]
108List=   (inca1d_aero.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    ,  Post_1D_inca_aero  ),\
109        (inca1d_reacflux.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc,  NONE  ),\
110        (inca1d_forcage.nc ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc ,  Post_1D_inca_forcage  ),\
111        (inca1d_veget.nc   ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   ,  Post_1D_inca_veget  ),\
112        (inca1mo_aero.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    ,  NONE  ),\
113        (inca1mo_reacflux.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc,  NONE  ),\
114        (inca1mo_forcage.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc ,  NONE  ),\
115        (inca1mo_veget.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   ,  NONE  )
116
117
118[Post_1D_inca_aero]
119Patches= ()
120GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
121TimeSeriesVars2D = (od550ssss, od550ssas,od550sscs,od550dustci, loaddustci, loadsscs, loadssas,loadssss, emidustci, emissas, emissss, emisscs)
122ChunckJob2D = NONE
123TimeSeriesVars3D = ()
124ChunckJob3D = NONE
125Seasonal=OFF
126
127
128[Post_1D_inca_forcage]
129Patches= ()
130GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
131TimeSeriesVars2D = (SWTOAAS_AER,SWTOAAS_DUST,SWTOAAS_SS)
132ChunckJob2D = NONE
133TimeSeriesVars3D = ()
134ChunckJob3D = NONE
135Seasonal=OFF
136
137
138[Post_1D_inca_veget]
139Patches= ()
140GatherWithInternal = (lon, lat, veget, time_counter)
141TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
142ChunckJob2D = NONE
143TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
144ChunckJob3D = NONE
145Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.