wiki:DevelopmentActivities/ORCHIDEE-CNP/howtoUse

Context Navigation

Version 83 (modified by dgoll, 6 years ago) (diff)
--

HOWTO install/compile/run ORCHIDEE-CN-P for offline use with libIGCM.

This howto is based on the information which can be found in the ORCHIDEE wiki regarding the trunk version of ORCHIDEE. Please check the wiki for information regarding the respective commands listed here.

See attachment for the file get_ORCNP.ksh for a script which does some(!, please check as I dont update this script) of the steps listed here automatically.

WARNING: the following assumes you run on obelix or curie

If you want to run on ada, please see the additional modification needed on the MICT wiki https://forge.ipsl.jussieu.fr/orchidee/wiki/DevelopmentActivities/Branches/ORCHIDEE-MICT-IMBALANCE-P/SimulationsonAda.

For other machines, we currently have no support available.

1. install libIGCM & ORCHIDEE-CN-P

1.1 where to install

You should install the model NOT in the home directory; it is even too small to handle diagnostics like "out_execution" or "out_orchidee". You can use , for example, your work directory: curie:

/ccc/work/cont003/dsm/<userID>

or project storage; here example for the IMBALANCE-P project on obelix:

/home/surface3/dgoll

1.2 install libIGCM & trunk ORCHIDEE

I use revision 2728 of libIGCM on obelix and curie (revision 2961 does not work):

svn -r2728 co http://forge.ipsl.jussieu.fr/igcmg/svn/modipsl/trunk modipsl
cd modipsl/util
./model ORCHIDEE_trunk

REMARK: When you are running on ada, you need to install revision 3609. For ada additional modifications are needed which are documented on the MICT wiki page: https://forge.ipsl.jussieu.fr/orchidee/wiki/DevelopmentActivities/Branches/ORCHIDEE-MICT-IMBALANCE-P/SimulationsonAda

REMARK: The default libIGCM copies all boundary files for ORCHIDEE instead of using links. This results in a reduction in computational efficiency as the copying of large files takes time. To use links instead of hard copy you can take a few simple steps. See description here http://forge.ipsl.jussieu.fr/orchidee/wiki/DevelopmentActivities/ORCHIDEE-CNP/LibIGCMmod01

1.3 Exchange the trunk ORCHIDEE with ORCHIDEE-CN-P

cd ../modeles
rm -fr ORCHIDEE
svn co svn://forge.ipsl.jussieu.fr/orchidee/branches/ORCHIDEE-CN-P/ORCHIDEE ORCHIDEE
cd ../util ; ./ins_make

1.4 Exchange the XIOS with the XIOS2

cd ../modeles
rm -fr XIOS
svn co http://forge.ipsl.jussieu.fr/ioserver/svn/XIOS/trunk  XIOS
cd ../util ; ./ins_make

For some (currently unkown) reason you need to pre-compile XIOS; make sure you a) chose the right argument for --arch option (for obelix it is ifort_LSCE , for curie it is X64_CURIE) and b) you have loaded the module netcdf/4p (for obelix) or netcdf/4.3.3.1_hdf5_parallel (curie) which can be done like this (or better add this line to your ~/.profile to have it automatically loaded when entering the machine). Here example for obelix:

module load netcdf/4p

cd ../modeles/XIOS/
./make_xios --prod --arch ifort_LSCE --full --j 8

Pro-tip: use the following command to see all available architectures; you need to figure out on your own which architecture fits which machine:

./make_xios --avail

1.5 Adjust IOIPSL

ORCHIDEE-CNP r4512 and newer

for ORCHIDEE newer than r4512 you need to use a modified version of IOIPSL. Follow the description here:

https://forge.ipsl.jussieu.fr/orchidee/wiki/DevelopmentActivities/Branches/ORCHIDEE-MICT-IMBALANCE-P/Compile#After8.4.0rev4057

for ORCHIDEE-CNP before r4512

adjust IOIPSL to be able to write more variables into the output by increase the value of max_var by 50 in modeles/IOIPSL/src/restcom.f90

 &  max_var=550, max_file=50, max_dim=NF90_MAX_VAR_DIMS

1.6 Exchange libIGCM configurations for ORCHIDEE

You can exchange the libIGCM configuration to have some example configuration adapted for ORCHIDEE-CNP:

cd modipsl/config
rm -rf ORCHIDEE_OL
svn co svn://forge.ipsl.jussieu.fr/orchidee/branches/ORCHIDEE-CN-P/ORCHIDEE_OL ORCHIDEE_OL
cd ../util ; ./ins_make

2. Compilation of ORCHIDEE-CN-P

2.1 compile orchidee

A: on obelix

Compile ORCHIDEE:

cd ../config/ORCHIDEE_OL
gmake with_xios

B: on curie

WARNING: before you do anything on curie; make sure you have copied the p86ipsl login environment to your home according to https://forge.ipsl.jussieu.fr/igcmg_doc/wiki/DocBenvBtgcc:

cp ~p86ipsl/.bashrc_curie  ~/.
cp ~p86ipsl/.bash_profile ~/.

Then compile the standard way:

cd ../config/ORCHIDEE_OL
gmake without_xios

DEVELOPER INFORMATION 2.3 Re-compile after code modifications

When you re-compile ORCHIDEE after you changed the code, the compiler will only recompile the modules(?)/subroutines(?) which you modified. Sometimes this doesn't work properly and your executable will crash. You will have no indications that the crash is connected to the compilations. Thus, it is a good idea to prophylactically to a full clean before you compile the code: First to this in modeles/ORCHIDEE/:

./makeorchidee_fcm -clean

then this in config/ORCHIDEE_OL

make clean

Now, you can compile the model as described in 2.2

3. Run ORCHIDEE

The spinup of the biogeochemical cycles is more complicated than for trunk due to the coupling of soil and vegetation. The current best strategy can be found here: https://docs.google.com/presentation/d/1dU5RDNR9Zsve-jaVl80-yPOgfiFiv3hXcjWBeYHIM34/edit?usp=sharing

There are different setups possible with libIGCM (http://forge.ipsl.jussieu.fr/igcmg_doc/wiki/Doc). Please check the documentation of libIGCM for more information, here I just tell you what you need to do.

3.1 OOL_SEC_STO or SPINUP ANALYTIC

http://forge.ipsl.jussieu.fr/orchidee/wiki/DevelopmentActivities/ORCHIDEE-CNP/howtoSPINAL

3.2 FLUXNET

http://forge.ipsl.jussieu.fr/orchidee/wiki/DevelopmentActivities/ORCHIDEE-CNP/howtoFLUXNET

3.3 MISC

Attachments (3)

FLXnet.png (35.5 KB) - added by dgoll 9 years ago. fluxnet scheme with spinup_analytic
fluxnet_sequence.png (26.3 KB) - added by dgoll 9 years ago. the sequence of simulations of the FLUXNET configuration
get_ORCNP.ksh (1.7 KB) - added by dgoll 7 years ago. script which gets ORCHIDEE-CN-P and thus all needed adjustments

Download all attachments as: .zip

Download in other formats:

Plain Text