source: branches/ORCHIDEE_2_2/ORCHIDEE/src_parameters/constantes_var.f90 @ 7519

! =================================================================================================================================
! MODULE       : constantes_var
!
! CONTACT      : orchidee-help _at_ listes.ipsl.fr
!
! LICENCE      : IPSL (2006)
! This software is governed by the CeCILL licence see ORCHIDEE/ORCHIDEE_CeCILL.LIC
!
!>\BRIEF        constantes_var module contains most constantes like pi, Earth radius, etc...
!!              and all externalized parameters except pft-dependent constants.
!!
!!\n DESCRIPTION: This module contains most constantes and the externalized parameters of ORCHIDEE which 
!!                are not pft-dependent.\n
!!                In this module, you can set the flag diag_qsat in order to detect the pixel where the
!!                temperature is out of range (look qsatcalc and dev_qsatcalc in qsat_moisture.f90).\n
!!                The Earth radius is approximated by the Equatorial radius.The Earth's equatorial radius a,
!!                or semi-major axis, is the distance from its center to the equator and equals 6,378.1370 km.
!!                The equatorial radius is often used to compare Earth with other planets.\n
!!                The meridional mean is well approximated by the semicubic mean of the two axe yielding 
!!                6367.4491 km or less accurately by the quadratic mean of the two axes about 6,367.454 km
!!                or even just the mean of the two axes about 6,367.445 km.\n
!!                This module is already USE in module constantes. Therefor no need to USE it seperatly except
!!                if the subroutines in module constantes are not needed.\n
!!                
!! RECENT CHANGE(S):
!!
!! REFERENCE(S) : 
!! - Louis, Jean-Francois (1979), A parametric model of vertical eddy fluxes in the atmosphere. 
!! Boundary Layer Meteorology, 187-202.\n
!!
!! SVN          :
!! $HeadURL: $
!! $Date$
!! $Revision$
!! \n
!_ ================================================================================================================================

MODULE constantes_var

  USE defprec

  IMPLICIT NONE
!-

                         !-----------------------!
                         !  ORCHIDEE CONSTANTS   !
                         !-----------------------!

  !
  ! FLAGS 
  !
  LOGICAL :: river_routing      !! activate river routing
!$OMP THREADPRIVATE(river_routing)
  LOGICAL, SAVE :: ok_nudge_mc  !! Activate nudging of soil moisture 
!$OMP THREADPRIVATE(ok_nudge_mc)
  LOGICAL, SAVE :: ok_nudge_snow!! Activate nudging of snow variables
!$OMP THREADPRIVATE(ok_nudge_snow)
  LOGICAL, SAVE :: nudge_interpol_with_xios  !! Activate reading and interpolation with XIOS for nudging fields
!$OMP THREADPRIVATE(nudge_interpol_with_xios)
  LOGICAL :: do_floodplains     !! activate flood plains
!$OMP THREADPRIVATE(do_floodplains)
  LOGICAL :: do_irrigation      !! activate computation of irrigation flux
!$OMP THREADPRIVATE(do_irrigation)
  LOGICAL :: ok_sechiba         !! activate physic of the model
!$OMP THREADPRIVATE(ok_sechiba)
  LOGICAL :: ok_stomate         !! activate carbon cycle
!$OMP THREADPRIVATE(ok_stomate)
  LOGICAL :: ok_dgvm            !! activate dynamic vegetation
!$OMP THREADPRIVATE(ok_dgvm)
  LOGICAL :: do_wood_harvest    !! activate wood harvest
!$OMP THREADPRIVATE(do_wood_harvest)
  LOGICAL :: ok_pheno           !! activate the calculation of lai using stomate rather than a prescription
!$OMP THREADPRIVATE(ok_pheno)
  LOGICAL :: ok_bvoc            !! activate biogenic volatile organic coumpounds
!$OMP THREADPRIVATE(ok_bvoc)
  LOGICAL :: ok_leafage         !! activate leafage
!$OMP THREADPRIVATE(ok_leafage)
  LOGICAL :: ok_radcanopy       !! use canopy radiative transfer model
!$OMP THREADPRIVATE(ok_radcanopy)
  LOGICAL :: ok_multilayer      !! use canopy radiative transfer model with multi-layers
!$OMP THREADPRIVATE(ok_multilayer)
  LOGICAL :: ok_pulse_NOx       !! calculate NOx emissions with pulse
!$OMP THREADPRIVATE(ok_pulse_NOx)
  LOGICAL :: ok_bbgfertil_NOx   !! calculate NOx emissions with bbg fertilizing effect
!$OMP THREADPRIVATE(ok_bbgfertil_NOx)
  LOGICAL :: ok_cropsfertil_NOx !! calculate NOx emissions with fertilizers use
!$OMP THREADPRIVATE(ok_cropsfertil_NOx)

  LOGICAL :: ok_co2bvoc_poss    !! CO2 inhibition on isoprene activated following Possell et al. (2005) model
!$OMP THREADPRIVATE(ok_co2bvoc_poss)
  LOGICAL :: ok_co2bvoc_wilk    !! CO2 inhibition on isoprene activated following Wilkinson et al. (2006) model
!$OMP THREADPRIVATE(ok_co2bvoc_wilk)
  
  LOGICAL, SAVE :: OFF_LINE_MODE = .FALSE.  !! ORCHIDEE detects if it is coupled with a GCM or 
                                            !! just use with one driver in OFF-LINE. (true/false)
!$OMP THREADPRIVATE(OFF_LINE_MODE)  
  LOGICAL, SAVE :: impose_param = .TRUE.    !! Flag impos_param : read all the parameters in the run.def file
!$OMP THREADPRIVATE(impose_param)
  CHARACTER(LEN=80), SAVE     :: restname_in       = 'NONE'                 !! Input Restart files name for Sechiba component  
!$OMP THREADPRIVATE(restname_in)
  CHARACTER(LEN=80), SAVE     :: restname_out      = 'sechiba_rest_out.nc'  !! Output Restart files name for Sechiba component
!$OMP THREADPRIVATE(restname_out)
  CHARACTER(LEN=80), SAVE     :: stom_restname_in  = 'NONE'                 !! Input Restart files name for Stomate component
!$OMP THREADPRIVATE(stom_restname_in)
  CHARACTER(LEN=80), SAVE     :: stom_restname_out = 'stomate_rest_out.nc'  !! Output Restart files name for Stomate component
!$OMP THREADPRIVATE(stom_restname_out)
  INTEGER, SAVE :: printlev=2       !! Standard level for text output [0, 1, 2, 3]
!$OMP THREADPRIVATE(printlev)

  !
  ! TIME
  !
  INTEGER(i_std), PARAMETER  :: spring_days_max = 40  !! Maximum number of days during which we watch for possible spring frost damage
  !
  ! SPECIAL VALUES 
  !
  INTEGER(i_std), PARAMETER :: undef_int = 999999999     !! undef integer for integer arrays (unitless)
  !-
  REAL(r_std), SAVE :: val_exp = 999999.                 !! Specific value if no restart value  (unitless)
!$OMP THREADPRIVATE(val_exp)
  REAL(r_std), PARAMETER :: undef = -9999.               !! Special value for stomate (unitless)
  
  REAL(r_std), PARAMETER :: min_sechiba = 1.E-8_r_std    !! Epsilon to detect a near zero floating point (unitless)
  REAL(r_std), PARAMETER :: undef_sechiba = 1.E+20_r_std !! The undef value used in SECHIBA (unitless)
  
  REAL(r_std), PARAMETER :: min_stomate = 1.E-8_r_std    !! Epsilon to detect a near zero floating point (unitless)
  REAL(r_std), PARAMETER :: large_value = 1.E33_r_std    !! some large value (for stomate) (unitless)

  REAL(r_std), SAVE :: alpha_nudge_mc                    !! Nudging constant for soil moisture 
!$OMP THREADPRIVATE(alpha_nudge_mc)
  REAL(r_std), SAVE :: alpha_nudge_snow                  !! Nudging constant for snow variables
!$OMP THREADPRIVATE(alpha_nudge_snow)

  !
  !  DIMENSIONING AND INDICES PARAMETERS  
  !
  INTEGER(i_std), PARAMETER :: ibare_sechiba = 1 !! Index for bare soil in Sechiba (unitless)
  INTEGER(i_std), PARAMETER :: ivis = 1          !! index for albedo in visible range (unitless)
  INTEGER(i_std), PARAMETER :: inir = 2          !! index for albeod i near-infrared range (unitless) 
  INTEGER(i_std), PARAMETER :: nnobio = 1        !! Number of other surface types: land ice (lakes,cities, ...) (unitless)
  INTEGER(i_std), PARAMETER :: iice = 1          !! Index for land ice (see nnobio) (unitless)
  !-
  !! Soil
  INTEGER(i_std), PARAMETER :: classnb = 9       !! Levels of soil colour classification (unitless)
  !-
  INTEGER(i_std), PARAMETER :: nleafages = 4     !! leaf age discretisation ( 1 = no discretisation )(unitless)
  !-
  !! litter fractions: indices (unitless)
  INTEGER(i_std), PARAMETER :: ileaf = 1         !! Index for leaf compartment (unitless)
  INTEGER(i_std), PARAMETER :: isapabove = 2     !! Index for sapwood above compartment (unitless)
  INTEGER(i_std), PARAMETER :: isapbelow = 3     !! Index for sapwood below compartment (unitless)
  INTEGER(i_std), PARAMETER :: iheartabove = 4   !! Index for heartwood above compartment (unitless)
  INTEGER(i_std), PARAMETER :: iheartbelow = 5   !! Index for heartwood below compartment (unitless)
  INTEGER(i_std), PARAMETER :: iroot = 6         !! Index for roots compartment (unitless)
  INTEGER(i_std), PARAMETER :: ifruit = 7        !! Index for fruits compartment (unitless)
  INTEGER(i_std), PARAMETER :: icarbres = 8      !! Index for reserve compartment (unitless)
  INTEGER(i_std), PARAMETER :: nparts = 8        !! Number of biomass compartments (unitless)
  !-
  !! indices for assimilation parameters 
  INTEGER(i_std), PARAMETER :: ivcmax = 1        !! Index for vcmax (assimilation parameters) (unitless)
  INTEGER(i_std), PARAMETER :: npco2 = 1         !! Number of assimilation parameters (unitless)
  !-
  !! trees and litter: indices for the parts of heart-
  !! and sapwood above and below the ground 
  INTEGER(i_std), PARAMETER :: iabove = 1       !! Index for above part (unitless)
  INTEGER(i_std), PARAMETER :: ibelow = 2       !! Index for below part (unitless)
  INTEGER(i_std), PARAMETER :: nlevs = 2        !! Number of levels for trees and litter (unitless)
  !-
  !! litter: indices for metabolic and structural part
  INTEGER(i_std), PARAMETER :: imetabolic = 1   !! Index for metabolic litter (unitless)
  INTEGER(i_std), PARAMETER :: istructural = 2  !! Index for structural litter (unitless)
  INTEGER(i_std), PARAMETER :: nlitt = 2        !! Number of levels for litter compartments (unitless)
  !-
  !! carbon pools: indices
  INTEGER(i_std), PARAMETER :: iactive = 1      !! Index for active carbon pool (unitless)
  INTEGER(i_std), PARAMETER :: islow = 2        !! Index for slow carbon pool (unitless)
  INTEGER(i_std), PARAMETER :: ipassive = 3     !! Index for passive carbon pool (unitless)
  INTEGER(i_std), PARAMETER :: ncarb = 3        !! Number of soil carbon pools (unitless)
  !-
  !! For isotopes and nitrogen
  INTEGER(i_std), PARAMETER :: nelements = 1    !! Number of isotopes considered
  INTEGER(i_std), PARAMETER :: icarbon = 1      !! Index for carbon 
  !
  !! Indices used for analytical spin-up
  INTEGER(i_std), PARAMETER :: nbpools = 7              !! Total number of carbon pools (unitless)
  INTEGER(i_std), PARAMETER :: istructural_above = 1    !! Index for structural litter above (unitless)
  INTEGER(i_std), PARAMETER :: istructural_below = 2    !! Index for structural litter below (unitless)
  INTEGER(i_std), PARAMETER :: imetabolic_above = 3     !! Index for metabolic litter above (unitless)
  INTEGER(i_std), PARAMETER :: imetabolic_below = 4     !! Index for metabolic litter below (unitless)
  INTEGER(i_std), PARAMETER :: iactive_pool = 5         !! Index for active carbon pool (unitless)
  INTEGER(i_std), PARAMETER :: islow_pool   = 6         !! Index for slow carbon pool (unitless)
  INTEGER(i_std), PARAMETER :: ipassive_pool = 7        !! Index for passive carbon pool (unitless)
  !
  !! Indicies used for output variables on Landuse tiles defined according to LUMIP project
  !! Note that ORCHIDEE do not represent pasture and urban land. Therefor the variables will have 
  !! val_exp as missing value for these tiles. 
  INTEGER(i_std), PARAMETER :: nlut=4                   !! Total number of landuse tiles according to LUMIP
  INTEGER(i_std), PARAMETER :: id_psl=1                 !! Index for primary and secondary land
  INTEGER(i_std), PARAMETER :: id_crp=2                 !! Index for crop land
  INTEGER(i_std), PARAMETER :: id_pst=3                 !! Index for pasture land
  INTEGER(i_std), PARAMETER :: id_urb=4                 !! Index for urban land


  !
  ! NUMERICAL AND PHYSICS CONSTANTS
  !
  !

  !-
  ! 1. Mathematical and numerical constants
  !-
  REAL(r_std), PARAMETER :: pi = 3.141592653589793238   !! pi souce : http://mathworld.wolfram.com/Pi.html (unitless)
  REAL(r_std), PARAMETER :: euler = 2.71828182845904523 !! e source : http://mathworld.wolfram.com/e.html (unitless)
  REAL(r_std), PARAMETER :: zero = 0._r_std             !! Numerical constant set to 0 (unitless)
  REAL(r_std), PARAMETER :: undemi = 0.5_r_std          !! Numerical constant set to 1/2 (unitless)
  REAL(r_std), PARAMETER :: un = 1._r_std               !! Numerical constant set to 1 (unitless)
  REAL(r_std), PARAMETER :: moins_un = -1._r_std        !! Numerical constant set to -1 (unitless)
  REAL(r_std), PARAMETER :: deux = 2._r_std             !! Numerical constant set to 2 (unitless)
  REAL(r_std), PARAMETER :: trois = 3._r_std            !! Numerical constant set to 3 (unitless)
  REAL(r_std), PARAMETER :: quatre = 4._r_std           !! Numerical constant set to 4 (unitless)
  REAL(r_std), PARAMETER :: cinq = 5._r_std             !![DISPENSABLE] Numerical constant set to 5 (unitless)
  REAL(r_std), PARAMETER :: six = 6._r_std              !![DISPENSABLE] Numerical constant set to 6 (unitless)
  REAL(r_std), PARAMETER :: huit = 8._r_std             !! Numerical constant set to 8 (unitless)
  REAL(r_std), PARAMETER :: mille = 1000._r_std         !! Numerical constant set to 1000 (unitless)

  !-
  ! 2 . Physics
  !-
  REAL(r_std), PARAMETER :: R_Earth = 6378000.              !! radius of the Earth : Earth radius ~= Equatorial radius (m)
  REAL(r_std), PARAMETER :: mincos  = 0.0001                !! Minimum cosine value used for interpolation (unitless) 
  REAL(r_std), PARAMETER :: pb_std = 1013.                  !! standard pressure (hPa)
  REAL(r_std), PARAMETER :: ZeroCelsius = 273.15            !! 0 degre Celsius in degre Kelvin (K)
  REAL(r_std), PARAMETER :: tp_00 = 273.15                  !! 0 degre Celsius in degre Kelvin (K)
  REAL(r_std), PARAMETER :: chalsu0 = 2.8345E06             !! Latent heat of sublimation (J.kg^{-1})
  REAL(r_std), PARAMETER :: chalev0 = 2.5008E06             !! Latent heat of evaporation (J.kg^{-1}) 
  REAL(r_std), PARAMETER :: chalfu0 = chalsu0-chalev0       !! Latent heat of fusion (J.kg^{-1}) 
  REAL(r_std), PARAMETER :: c_stefan = 5.6697E-8            !! Stefan-Boltzman constant (W.m^{-2}.K^{-4})
  REAL(r_std), PARAMETER :: cp_air = 1004.675               !! Specific heat of dry air (J.kg^{-1}.K^{-1}) 
  REAL(r_std), PARAMETER :: cte_molr = 287.05               !! Specific constant of dry air (kg.mol^{-1}) 
  REAL(r_std), PARAMETER :: kappa = cte_molr/cp_air         !! Kappa : ratio between specific constant and specific heat 
                                                            !! of dry air (unitless)
  REAL(r_std), PARAMETER :: msmlr_air = 28.964E-03          !! Molecular weight of dry air (kg.mol^{-1})
  REAL(r_std), PARAMETER :: msmlr_h2o = 18.02E-03           !! Molecular weight of water vapor (kg.mol^{-1}) 
  REAL(r_std), PARAMETER :: cp_h2o = &                      !! Specific heat of water vapor (J.kg^{-1}.K^{-1}) 
       & cp_air*(quatre*msmlr_air)/( 3.5_r_std*msmlr_h2o) 
  REAL(r_std), PARAMETER :: cte_molr_h2o = cte_molr/quatre  !! Specific constant of water vapor (J.kg^{-1}.K^{-1}) 
  REAL(r_std), PARAMETER :: retv = msmlr_air/msmlr_h2o-un   !! Ratio between molecular weight of dry air and water 
                                                            !! vapor minus 1(unitless)  
  REAL(r_std), PARAMETER :: rvtmp2 = cp_h2o/cp_air-un       !! Ratio between specific heat of water vapor and dry air
                                                            !! minus 1 (unitless)
  REAL(r_std), PARAMETER :: cepdu2 = (0.1_r_std)**2         !! Squared wind shear (m^2.s^{-2}) 
  REAL(r_std), PARAMETER :: ct_karman = 0.41_r_std          !! Van Karmann Constant (unitless)
  REAL(r_std), PARAMETER :: cte_grav = 9.80665_r_std        !! Acceleration of the gravity (m.s^{-2})
  REAL(r_std), PARAMETER :: pa_par_hpa = 100._r_std         !! Transform pascal into hectopascal (unitless)
  REAL(r_std), PARAMETER :: RR = 8.314                      !! Ideal gas constant (J.mol^{-1}.K^{-1})
  REAL(r_std), PARAMETER :: Sct = 1370.                     !! Solar constant (W.m^{-2}) 


  INTEGER(i_std), SAVE :: testpft = 6
!$OMP THREADPRIVATE(testpft)
  !-
  ! 3. Climatic constants
  !-
  !! Constantes of the Louis scheme 
  REAL(r_std), SAVE :: cb = 5._r_std              !! Constant of the Louis scheme (unitless);
                                                  !! reference to Louis (1979)
!$OMP THREADPRIVATE(cb)
  REAL(r_std), SAVE :: cc = 5._r_std              !! Constant of the Louis scheme (unitless);
                                                  !! reference to Louis (1979)
!$OMP THREADPRIVATE(cc)
  REAL(r_std), SAVE :: cd = 5._r_std              !! Constant of the Louis scheme (unitless);
                                                  !! reference to Louis (1979)
!$OMP THREADPRIVATE(cd)
  REAL(r_std), SAVE :: rayt_cste = 125.           !! Constant in the computation of surface resistance (W.m^{-2})
!$OMP THREADPRIVATE(rayt_cste)
  REAL(r_std), SAVE :: defc_plus = 23.E-3         !! Constant in the computation of surface resistance (K.W^{-1})
!$OMP THREADPRIVATE(defc_plus)
  REAL(r_std), SAVE :: defc_mult = 1.5            !! Constant in the computation of surface resistance (K.W^{-1})
!$OMP THREADPRIVATE(defc_mult)

  !-
  ! 4. Soil thermodynamics constants
  !-
  ! Look at constantes_soil.f90


  !
  ! OPTIONAL PARTS OF THE MODEL
  !
  LOGICAL,PARAMETER :: diag_qsat = .TRUE.         !! One of the most frequent problems is a temperature out of range
                                                  !! we provide here a way to catch that in the calling procedure. 
                                                  !! (from Jan Polcher)(true/false) 
  LOGICAL, SAVE     :: almaoutput =.FALSE.        !! Selects the type of output for the model.(true/false)
                                                  !! Value is read from run.def in intersurf_history
!$OMP THREADPRIVATE(almaoutput)

  !
  ! DIVERSE
  !
  CHARACTER(LEN=100), SAVE :: stomate_forcing_name='NONE'  !! NV080800 Name of STOMATE forcing file (unitless)
                                                           ! Compatibility with Nicolas Viovy driver.
!$OMP THREADPRIVATE(stomate_forcing_name)
  CHARACTER(LEN=100), SAVE :: stomate_Cforcing_name='NONE' !! NV080800 Name of soil forcing file (unitless)
                                                           ! Compatibility with Nicolas Viovy driver.
!$OMP THREADPRIVATE(stomate_Cforcing_name)
  INTEGER(i_std), SAVE :: forcing_id                 !! Index of the forcing file (unitless)
!$OMP THREADPRIVATE(forcing_id)
  LOGICAL, SAVE :: allow_forcing_write=.TRUE.        !! Allow writing of stomate_forcing file. 
                                                     !! This variable will be set to false for teststomate. 
!$OMP THREADPRIVATE(allow_forcing_write)



                         !------------------------!
                         !  SECHIBA PARAMETERS    !
                         !------------------------!
 

  !
  ! GLOBAL PARAMETERS   
  !
  REAL(r_std), SAVE :: min_wind = 0.1      !! The minimum wind (m.s^{-1})
!$OMP THREADPRIVATE(min_wind)
  REAL(r_std), PARAMETER :: min_qc = 1.e-4 !! The minimum value for qc (qc=drag*wind) used in coupled(enerbil) and forced mode (enerbil and diffuco) 
  REAL(r_std), SAVE :: snowcri = 1.5       !! Sets the amount above which only sublimation occures (kg.m^{-2})
!$OMP THREADPRIVATE(snowcri)


  !
  ! FLAGS ACTIVATING SUB-MODELS
  !
  LOGICAL, SAVE :: treat_expansion = .FALSE.   !! Do we treat PFT expansion across a grid point after introduction? (true/false)
!$OMP THREADPRIVATE(treat_expansion)
  LOGICAL, SAVE :: ok_herbivores = .FALSE.     !! flag to activate herbivores (true/false)
!$OMP THREADPRIVATE(ok_herbivores)
  LOGICAL, SAVE :: harvest_agri = .TRUE.       !! flag to harvest aboveground biomass from agricultural PFTs)(true/false)
!$OMP THREADPRIVATE(harvest_agri)
  LOGICAL, SAVE :: lpj_gap_const_mort          !! constant moratlity (true/false). Default value depend on OK_DGVM.
!$OMP THREADPRIVATE(lpj_gap_const_mort)
  LOGICAL, SAVE :: disable_fire = .TRUE.       !! flag that disable fire (true/false)
!$OMP THREADPRIVATE(disable_fire)
  LOGICAL, SAVE :: spinup_analytic = .FALSE.   !! Flag to activate analytical resolution for spinup (true/false)
!$OMP THREADPRIVATE(spinup_analytic)

  !
  ! CONFIGURATION VEGETATION
  !
  LOGICAL, SAVE :: agriculture = .TRUE.    !! allow agricultural PFTs (true/false)
!$OMP THREADPRIVATE(agriculture)
  LOGICAL, SAVE :: impveg = .FALSE.        !! Impose vegetation ? (true/false)
!$OMP THREADPRIVATE(impveg)
  LOGICAL, SAVE :: impsoilt = .FALSE.      !! Impose soil ? (true/false)
!$OMP THREADPRIVATE(impsoilt)
  LOGICAL, SAVE :: do_now_stomate_lcchange = .FALSE.  !! Time to call lcchange in stomate_lpj
!$OMP THREADPRIVATE(do_now_stomate_lcchange)
  LOGICAL, SAVE :: do_now_stomate_woodharvest = .FALSE.  !! Time to call woodharvest in stomate_lpj
!$OMP THREADPRIVATE(do_now_stomate_woodharvest)
  LOGICAL, SAVE :: done_stomate_lcchange = .FALSE.    !! If true, call lcchange in stomate_lpj has just been done. 
!$OMP THREADPRIVATE(done_stomate_lcchange)
  LOGICAL, SAVE :: read_lai = .FALSE.      !! Flag to read a map of LAI if STOMATE is not activated (true/false)
!$OMP THREADPRIVATE(read_lai)
  LOGICAL, SAVE :: veget_reinit = .TRUE.   !! To change LAND USE file in a run. (true/false)
!$OMP THREADPRIVATE(veget_reinit)
  LOGICAL, SAVE :: vegetmap_reset = .FALSE.!! Reset the vegetation map and reset carbon related variables
!$OMP THREADPRIVATE(vegetmap_reset)
  INTEGER(i_std) , SAVE :: veget_update    !! Update frequency in years for landuse (nb of years)
!$OMP THREADPRIVATE(veget_update)
  !
  ! PARAMETERS USED BY BOTH HYDROLOGY MODELS
  !
  REAL(r_std), SAVE :: max_snow_age = 50._r_std !! Maximum period of snow aging (days)
!$OMP THREADPRIVATE(max_snow_age)
  REAL(r_std), SAVE :: snow_trans = 0.2_r_std   !! Transformation time constant for snow (m), reduced from the value 0.3 (04/07/2016)
!$OMP THREADPRIVATE(snow_trans)
  REAL(r_std), SAVE :: sneige                   !! Lower limit of snow amount (kg.m^{-2})
!$OMP THREADPRIVATE(sneige)
  REAL(r_std), SAVE :: maxmass_snow = 3000.     !! The maximum mass of snow (kg.m^{-2})
!$OMP THREADPRIVATE(maxmass_snow)

  !! Heat capacity
  REAL(r_std), PARAMETER :: rho_water = 1000.           !! Density of water (kg/m3)
  REAL(r_std), PARAMETER :: rho_ice = 920.              !! Density of ice (kg/m3)
  REAL(r_std), PARAMETER :: rho_soil = 2700.            !! Density of soil particles (kg/m3), value from Peters-Lidard et al. 1998

  !! Thermal conductivities
  REAL(r_std), PARAMETER :: cond_water = 0.6            !! Thermal conductivity of liquid water (W/m/K)
  REAL(r_std), PARAMETER :: cond_ice = 2.2              !! Thermal conductivity of ice (W/m/K)
  REAL(r_std), PARAMETER :: cond_solid = 2.32           !! Thermal conductivity of mineral soil particles (W/m/K)

  !! Time constant of long-term soil humidity (s) 
  REAL(r_std), PARAMETER :: lhf = 0.3336*1.E6           !! Latent heat of fusion (J/kg)

  INTEGER(i_std), PARAMETER :: nsnow=3                  !! Number of levels in the snow for explicit snow scheme   
  REAL(r_std), PARAMETER    :: XMD    = 28.9644E-3 
  REAL(r_std), PARAMETER    :: XBOLTZ      = 1.380658E-23 
  REAL(r_std), PARAMETER    :: XAVOGADRO   = 6.0221367E+23 
  REAL(r_std), PARAMETER    :: XRD    = XAVOGADRO * XBOLTZ / XMD 
  REAL(r_std), PARAMETER    :: XCPD   = 7.* XRD /2. 
  REAL(r_std), PARAMETER    :: phigeoth = 0.057 ! 0. DKtest 
  REAL(r_std), PARAMETER    :: thick_min_snow = .01 

  !! The maximum snow density and water holding characterisicts 
  REAL(r_std), SAVE         :: xrhosmax = 750.  ! (kg m-3) 
!$OMP THREADPRIVATE(xrhosmax)
  REAL(r_std), SAVE         :: xwsnowholdmax1   = 0.03  ! (-) 
!$OMP THREADPRIVATE(xwsnowholdmax1)
  REAL(r_std), SAVE         :: xwsnowholdmax2   = 0.10  ! (-) 
!$OMP THREADPRIVATE(xwsnowholdmax2)
  REAL(r_std), SAVE         :: xsnowrhohold     = 200.0 ! (kg/m3) 
!$OMP THREADPRIVATE(xsnowrhohold)
  REAL(r_std), SAVE         :: xrhosmin = 50. 
!$OMP THREADPRIVATE(xrhosmin)
  REAL(r_std), PARAMETER    :: xci = 2.106e+3 
  REAL(r_std), PARAMETER    :: xrv = 6.0221367e+23 * 1.380658e-23 /18.0153e-3 

  !! ISBA-ES Critical snow depth at which snow grid thicknesses constant 
  REAL(r_std), PARAMETER    :: xsnowcritd = 0.03  ! (m) 

  !! The threshold of snow depth used for preventing numerical problem in thermal calculations
  REAL(r_std), PARAMETER    :: snowcritd_thermal = 0.01  ! (m)  
  
  !! ISBA-ES CROCUS (Pahaut 1976): snowfall density coefficients: 
  REAL(r_std), PARAMETER       :: snowfall_a_sn = 109.0  !! (kg/m3) 
  REAL(r_std), PARAMETER       :: snowfall_b_sn =   6.0  !! (kg/m3/K) 
  REAL(r_std), PARAMETER       :: snowfall_c_sn =  26.0  !! [kg/(m7/2 s1/2)] 

  REAL(r_std), PARAMETER       :: dgrain_new_max=  2.0e-4!! (m) : Maximum grain size of new snowfall 
  
  !! Used in explicitsnow to prevent numerical problems as snow becomes vanishingly thin. 
  REAL(r_std), PARAMETER                :: psnowdzmin = .0001   ! m 
  REAL(r_std), PARAMETER                :: xsnowdmin = .000001  ! m 

  REAL(r_std), PARAMETER                :: ph2o = 1000.         !! Water density [kg/m3] 
  
  ! ISBA-ES Thermal conductivity coefficients from Anderson (1976): 
  ! see Boone, Meteo-France/CNRM Note de Centre No. 70 (2002) 
  REAL(r_std), SAVE                     :: ZSNOWTHRMCOND1 = 0.02    ! [W/m/K] 
!$OMP THREADPRIVATE(ZSNOWTHRMCOND1)
  REAL(r_std), SAVE                     :: ZSNOWTHRMCOND2 = 2.5E-6  ! [W m5/(kg2 K)] 
!$OMP THREADPRIVATE(ZSNOWTHRMCOND2)
  
  ! ISBA-ES Thermal conductivity: Implicit vapor diffn effects 
  ! (sig only for new snow OR high altitudes) 
  ! from Sun et al. (1999): based on data from Jordan (1991) 
  ! see Boone, Meteo-France/CNRM Note de Centre No. 70 (2002) 
  ! 
  REAL(r_std), SAVE                       :: ZSNOWTHRMCOND_AVAP  = -0.06023 ! (W/m/K) 
!$OMP THREADPRIVATE(ZSNOWTHRMCOND_AVAP)
  REAL(r_std), SAVE                       :: ZSNOWTHRMCOND_BVAP  = -2.5425  ! (W/m) 
!$OMP THREADPRIVATE(ZSNOWTHRMCOND_BVAP)
  REAL(r_std), SAVE                       :: ZSNOWTHRMCOND_CVAP  = -289.99  ! (K) 
!$OMP THREADPRIVATE(ZSNOWTHRMCOND_CVAP)
  
  REAL(r_std),SAVE :: xansmax = 0.85      !! Maxmimum snow albedo
!$OMP THREADPRIVATE(xansmax)
  REAL(r_std),SAVE :: xansmin = 0.50      !! Miniumum snow albedo
!$OMP THREADPRIVATE(xansmin)
  REAL(r_std),SAVE :: xans_todry = 0.008  !! Albedo decay rate for dry snow
!$OMP THREADPRIVATE(xans_todry)
  REAL(r_std),SAVE :: xans_t = 0.240      !! Albedo decay rate for wet snow
!$OMP THREADPRIVATE(xans_t)

  ! ISBA-ES Thermal conductivity coefficients from Anderson (1976):
  ! see Boone, Meteo-France/CNRM Note de Centre No. 70 (2002)
  REAL(r_std), PARAMETER                  :: XP00 = 1.E5

  ! ISBA-ES Thermal conductivity: Implicit vapor diffn effects
  ! (sig only for new snow OR high altitudes)
  ! from Sun et al. (1999): based on data from Jordan (1991)
  ! see Boone, Meteo-France/CNRM Note de Centre No. 70 (2002)
  !
  REAL(r_std), SAVE          :: ZSNOWCMPCT_RHOD  = 150.0        !! (kg/m3)
!$OMP THREADPRIVATE(ZSNOWCMPCT_RHOD)
  REAL(r_std), SAVE          :: ZSNOWCMPCT_ACM   = 2.8e-6       !! (1/s
!$OMP THREADPRIVATE(ZSNOWCMPCT_ACM)
  REAL(r_std), SAVE          :: ZSNOWCMPCT_BCM   = 0.04         !! (1/K) 
!$OMP THREADPRIVATE(ZSNOWCMPCT_BCM)
  REAL(r_std), SAVE          :: ZSNOWCMPCT_CCM   = 460.         !! (m3/kg)
!$OMP THREADPRIVATE(ZSNOWCMPCT_CCM)
  REAL(r_std), SAVE          :: ZSNOWCMPCT_V0    = 3.7e7        !! (Pa/s) 
!$OMP THREADPRIVATE(ZSNOWCMPCT_V0)
  REAL(r_std), SAVE          :: ZSNOWCMPCT_VT    = 0.081        !! (1/K)
!$OMP THREADPRIVATE(ZSNOWCMPCT_VT)
  REAL(r_std), SAVE          :: ZSNOWCMPCT_VR    = 0.018        !! (m3/kg)
!$OMP THREADPRIVATE(ZSNOWCMPCT_VR)

  !
  ! BVOC : Biogenic activity  for each age class
  !
  REAL(r_std), SAVE, DIMENSION(nleafages) :: iso_activity = (/0.5, 1.5, 1.5, 0.5/)     !! Biogenic activity for each 
                                                                                       !! age class : isoprene (unitless)
!$OMP THREADPRIVATE(iso_activity)
  REAL(r_std), SAVE, DIMENSION(nleafages) :: methanol_activity = (/1., 1., 0.5, 0.5/)  !! Biogenic activity for each
                                                                                       !! age class : methanol (unnitless)
!$OMP THREADPRIVATE(methanol_activity)

  !
  ! condveg.f90
  !

  ! 1. Scalar

  ! 1.1 Flags used inside the module

  LOGICAL, SAVE :: alb_bare_model = .FALSE. !! Switch for choosing values of bare soil 
                                            !! albedo (see header of subroutine)
                                            !! (true/false)
!$OMP THREADPRIVATE(alb_bare_model)
  LOGICAL, SAVE :: alb_bg_modis = .TRUE.    !! Switch for choosing values of bare soil 
                                            !! albedo read from file
                                            !! (true/false)
!$OMP THREADPRIVATE(alb_bg_modis)
  LOGICAL, SAVE :: impaze = .FALSE.         !! Switch for choosing surface parameters
                                            !! (see header of subroutine).  
                                            !! (true/false)
!$OMP THREADPRIVATE(impaze)
  LOGICAL, SAVE :: rough_dyn = .TRUE.       !! Chooses between two methods to calculate the 
                                            !! the roughness height : static or dynamic (varying with LAI)
                                            !! (true/false)
!$OMP THREADPRIVATE(rough_dyn)

  LOGICAL, SAVE :: new_watstress = .FALSE.
!$OMP THREADPRIVATE(new_watstress)

  REAL(r_std), SAVE :: alpha_watstress = 1.
!$OMP THREADPRIVATE(alpha_watstress)

  ! 1.2 Others 


  REAL(r_std), SAVE :: height_displacement = 0.66        !! Factor to calculate the zero-plane displacement
                                                         !! height from vegetation height (m)
!$OMP THREADPRIVATE(height_displacement)
  REAL(r_std), SAVE :: z0_bare = 0.01                    !! bare soil roughness length (m)
!$OMP THREADPRIVATE(z0_bare)
  REAL(r_std), SAVE :: z0_ice = 0.001                    !! ice roughness length (m)
!$OMP THREADPRIVATE(z0_ice)
  REAL(r_std), SAVE :: tcst_snowa = 10.0                 !! Time constant of the albedo decay of snow (days), increased from the value 5.0 (04/07/2016)
!$OMP THREADPRIVATE(tcst_snowa)
  REAL(r_std), SAVE :: snowcri_alb = 10.                 !! Critical value for computation of snow albedo (cm)
!$OMP THREADPRIVATE(snowcri_alb)
  REAL(r_std), SAVE :: fixed_snow_albedo = undef_sechiba !! To choose a fixed snow albedo value (unitless)
!$OMP THREADPRIVATE(fixed_snow_albedo)
  REAL(r_std), SAVE :: z0_scal = 0.15                    !! Surface roughness height imposed (m)
!$OMP THREADPRIVATE(z0_scal)
  REAL(r_std), SAVE :: roughheight_scal = zero           !! Effective roughness Height depending on zero-plane 
                                                         !! displacement height (m) (imposed)
!$OMP THREADPRIVATE(roughheight_scal)
  REAL(r_std), SAVE :: emis_scal = 1.0                   !! Surface emissivity imposed (unitless)
!$OMP THREADPRIVATE(emis_scal)

  REAL(r_std), SAVE :: c1 = 0.32                         !! Constant used in the formulation of the ratio of 
!$OMP THREADPRIVATE(c1)                                  !! friction velocity to the wind speed at the canopy top
                                                         !! see Ershadi et al. (2015) for more info
  REAL(r_std), SAVE :: c2 = 0.264                        !! Constant used in the formulation of the ratio of 
!$OMP THREADPRIVATE(c2)                                  !! friction velocity to the wind speed at the canopy top
                                                         !! see Ershadi et al. (2015) for more info
  REAL(r_std), SAVE :: c3 = 15.1                         !! Constant used in the formulation of the ratio of 
!$OMP THREADPRIVATE(c3)                                  !! friction velocity to the wind speed at the canopy top
                                                         !! see Ershadi et al. (2015) for more info
  REAL(r_std), SAVE :: Cdrag_foliage = 0.2               !! Drag coefficient of the foliage
!$OMP THREADPRIVATE(Cdrag_foliage)                       !! See Ershadi et al. (2015) and Su et. al (2001) for more info
  REAL(r_std), SAVE :: Ct = 0.01                         !! Heat transfer coefficient of the leaf
!$OMP THREADPRIVATE(Ct)                                  !! See Ershadi et al. (2015) and Su et. al (2001) for more info
  REAL(r_std), SAVE :: Prandtl = 0.71                    !! Prandtl number used in the calculation of Ct_star
!$OMP THREADPRIVATE(Prandtl)                             !! See Su et. al (2001) for more info



  ! 2. Arrays

  REAL(r_std), SAVE, DIMENSION(2) :: alb_deadleaf = (/ .12, .35/)    !! albedo of dead leaves, VIS+NIR (unitless)
!$OMP THREADPRIVATE(alb_deadleaf)
  REAL(r_std), SAVE, DIMENSION(2) :: alb_ice = (/ .60, .20/)         !! albedo of ice, VIS+NIR (unitless)
!$OMP THREADPRIVATE(alb_ice)
  REAL(r_std), SAVE, DIMENSION(2) :: albedo_scal = (/ 0.25, 0.25 /)  !! Albedo values for visible and near-infrared 
                                                                     !! used imposed (unitless) 
!$OMP THREADPRIVATE(albedo_scal)
  REAL(r_std) , SAVE, DIMENSION(classnb) :: vis_dry = (/0.24,&
       &0.22, 0.20, 0.18, 0.16, 0.14, 0.12, 0.10, 0.27/)  !! Soil albedo values to soil colour classification:
                                                          !! dry soil albedo values in visible range
!$OMP THREADPRIVATE(vis_dry)
  REAL(r_std), SAVE, DIMENSION(classnb) :: nir_dry = (/0.48,&
       &0.44, 0.40, 0.36, 0.32, 0.28, 0.24, 0.20, 0.55/)  !! Soil albedo values to soil colour classification:
                                                          !! dry soil albedo values in near-infrared range 
!$OMP THREADPRIVATE(nir_dry)
  REAL(r_std), SAVE, DIMENSION(classnb) :: vis_wet = (/0.12,&
       &0.11, 0.10, 0.09, 0.08, 0.07, 0.06, 0.05, 0.15/)  !! Soil albedo values to soil colour classification:
                                                          !! wet soil albedo values in visible range 
!$OMP THREADPRIVATE(vis_wet)
  REAL(r_std), SAVE, DIMENSION(classnb) :: nir_wet = (/0.24,&
       &0.22, 0.20, 0.18, 0.16, 0.14, 0.12, 0.10, 0.31/)  !! Soil albedo values to soil colour classification:
                                                          !! wet soil albedo values in near-infrared range
!$OMP THREADPRIVATE(nir_wet)
  REAL(r_std), SAVE, DIMENSION(classnb) :: albsoil_vis = (/ &
       &0.18, 0.16, 0.16, 0.15, 0.12, 0.105, 0.09, 0.075, 0.25/)   !! Soil albedo values to soil colour classification:
                                                                   !! Averaged of wet and dry soil albedo values
                                                                   !! in visible and near-infrared range
!$OMP THREADPRIVATE(albsoil_vis) 
  REAL(r_std), SAVE, DIMENSION(classnb) :: albsoil_nir = (/ &
       &0.36, 0.34, 0.34, 0.33, 0.30, 0.25, 0.20, 0.15, 0.45/)  !! Soil albedo values to soil colour classification:
                                                                !! Averaged of wet and dry soil albedo values
                                                                !! in visible and near-infrared range
!$OMP THREADPRIVATE(albsoil_nir)

  !
  ! diffuco.f90
  !

  ! 0. Constants

  REAL(r_std), PARAMETER :: Tetens_1 = 0.622         !! Ratio between molecular weight of water vapor and molecular weight  
                                                     !! of dry air (unitless)
  REAL(r_std), PARAMETER :: Tetens_2 = 0.378         !!
  REAL(r_std), PARAMETER :: ratio_H2O_to_CO2 = 1.6   !! Ratio of water vapor diffusivity to the CO2 diffusivity (unitless)
  REAL(r_std), PARAMETER :: mol_to_m_1 = 0.0244      !!
  REAL(r_std), PARAMETER :: RG_to_PAR = 0.5          !!
  REAL(r_std), PARAMETER :: W_to_mol = 4.6          !! W_to_mmol * RG_to_PAR = 2.3

  ! 1. Scalar

  INTEGER(i_std), SAVE :: nlai = 20             !! Number of LAI levels (unitless)
!$OMP THREADPRIVATE(nlai)
  LOGICAL, SAVE :: ldq_cdrag_from_gcm = .FALSE. !! Set to .TRUE. if you want q_cdrag coming from GCM
!$OMP THREADPRIVATE(ldq_cdrag_from_gcm)
  REAL(r_std), SAVE :: laimax = 12.             !! Maximal LAI used for splitting LAI into N layers (m^2.m^{-2})
!$OMP THREADPRIVATE(laimax)
  LOGICAL, SAVE :: downregulation_co2 = .TRUE.             !! Set to .TRUE. if you want CO2 downregulation version used for CMIP6 6.1.0-6.1.10
!$OMP THREADPRIVATE(downregulation_co2)
  LOGICAL, SAVE :: downregulation_co2_new = .FALSE.        !! Set to .TRUE. if you want CO2 downregulation version revised for CMIP6 6.1.11
!$OMP THREADPRIVATE(downregulation_co2_new)
  REAL(r_std), SAVE :: downregulation_co2_baselevel = 380. !! CO2 base level (ppm)
!$OMP THREADPRIVATE(downregulation_co2_baselevel)
  REAL(r_std), SAVE :: downregulation_co2_minimum = 280.   !! CO2 value above which downregulation is taken into account 
!$OMP THREADPRIVATE(downregulation_co2_minimum)

  REAL(r_std), SAVE :: gb_ref = 1./25.                     !! Leaf bulk boundary layer resistance (s m-1)
!$OMP THREADPRIVATE(gb_ref)

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: lai_level_depth = 0.15  !!
!$OMP THREADPRIVATE(lai_level_depth)
!
  REAL(r_std), SAVE, DIMENSION(6) :: dew_veg_poly_coeff = &            !! coefficients of the 5 degree polynomomial used
  & (/ 0.887773, 0.205673, 0.110112, 0.014843,  0.000824,  0.000017 /) !! in the equation of coeff_dew_veg
!$OMP THREADPRIVATE(dew_veg_poly_coeff)
!
  REAL(r_std), SAVE               :: Oi=210000.    !! Intercellular oxygen partial pressure (ubar)
!$OMP THREADPRIVATE(Oi)
  !
  ! slowproc.f90 
  !

  ! 1. Scalar

  INTEGER(i_std), SAVE :: veget_year_orig = 0        !!  first year for landuse (number)
!$OMP THREADPRIVATE(veget_year_orig)
  
  REAL(r_std), SAVE :: min_vegfrac = 0.001           !! Minimal fraction of mesh a vegetation type can occupy (0-1, unitless)
!$OMP THREADPRIVATE(min_vegfrac)
  REAL(r_std), SAVE :: frac_nobio_fixed_test_1 = 0.0 !! Value for frac_nobio for tests in 0-dim simulations (0-1, unitless)
!$OMP THREADPRIVATE(frac_nobio_fixed_test_1)
  
  REAL(r_std), SAVE :: stempdiag_bid = 280.          !! only needed for an initial LAI if there is no restart file
!$OMP THREADPRIVATE(stempdiag_bid)


                           !-----------------------------!
                           !  STOMATE AND LPJ PARAMETERS !
                           !-----------------------------!


  !
  ! lpj_constraints.f90
  !
  
  ! 1. Scalar

  REAL(r_std), SAVE  :: too_long = 5.      !! longest sustainable time without 
                                           !! regeneration (vernalization) (years)
!$OMP THREADPRIVATE(too_long)


  !
  ! lpj_establish.f90
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: estab_max_tree = 0.12   !! Maximum tree establishment rate (ind/m2/dt_stomate)
!$OMP THREADPRIVATE(estab_max_tree)
  REAL(r_std), SAVE :: estab_max_grass = 0.12  !! Maximum grass establishment rate (ind/m2/dt_stomate)
!$OMP THREADPRIVATE(estab_max_grass)
  
  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: establish_scal_fact = 5.  !!
!$OMP THREADPRIVATE(establish_scal_fact)
  REAL(r_std), SAVE :: max_tree_coverage = 0.98  !! (0-1, unitless)
!$OMP THREADPRIVATE(max_tree_coverage)
  REAL(r_std), SAVE :: ind_0_estab = 0.2         !! = ind_0 * 10.
!$OMP THREADPRIVATE(ind_0_estab)


  !
  ! lpj_fire.f90
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: tau_fire = 30.           !! Time scale for memory of the fire index (days).
!$OMP THREADPRIVATE(tau_fire)
  REAL(r_std), SAVE :: litter_crit = 200.       !! Critical litter quantity for fire
                                                !! below which iginitions extinguish 
                                                !! @tex $(gC m^{-2})$ @endtex
!$OMP THREADPRIVATE(litter_crit)
  REAL(r_std), SAVE :: fire_resist_struct = 0.5 !!
!$OMP THREADPRIVATE(fire_resist_struct)
  ! 2. Arrays

  REAL(r_std), SAVE, DIMENSION(nparts) :: co2frac = &    !! The fraction of the different biomass 
       & (/ .95, .95, 0., 0.3, 0., 0., .95, .95 /)       !! compartments emitted to the atmosphere 
!$OMP THREADPRIVATE(co2frac)                                                         !! when burned (unitless, 0-1)  

  ! 3. Coefficients of equations

  REAL(r_std), SAVE, DIMENSION(3) :: bcfrac_coeff = (/ .3,  1.3,  88.2 /)         !! (unitless)
!$OMP THREADPRIVATE(bcfrac_coeff)
  REAL(r_std), SAVE, DIMENSION(4) :: firefrac_coeff = (/ 0.45, 0.8, 0.6, 0.13 /)  !! (unitless)
!$OMP THREADPRIVATE(firefrac_coeff)

  !
  ! lpj_gap.f90
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: ref_greff = 0.035         !! Asymptotic maximum mortality rate
                                                 !! @tex $(year^{-1})$ @endtex
!$OMP THREADPRIVATE(ref_greff)

  !               
  ! lpj_light.f90 
  !              

  ! 1. Scalar
  
  LOGICAL, SAVE :: annual_increase = .TRUE. !! for diagnosis of fpc increase, compare today's fpc to last year's maximum (T) or
                                            !! to fpc of last time step (F)? (true/false)
!$OMP THREADPRIVATE(annual_increase)
  REAL(r_std), SAVE :: min_cover = 0.05     !! For trees, minimum fraction of crown area occupied
                                            !! (due to its branches etc.) (0-1, unitless)
                                            !! This means that only a small fraction of its crown area
                                            !! can be invaded by other trees.
!$OMP THREADPRIVATE(min_cover)
  !
  ! lpj_pftinout.f90 
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: min_avail = 0.01         !! minimum availability
!$OMP THREADPRIVATE(min_avail)
  REAL(r_std), SAVE :: ind_0 = 0.02             !! initial density of individuals
!$OMP THREADPRIVATE(ind_0)
  ! 3. Coefficients of equations
  
  REAL(r_std), SAVE :: RIP_time_min = 1.25      !! test whether the PFT has been eliminated lately (years)
!$OMP THREADPRIVATE(RIP_time_min)
  REAL(r_std), SAVE :: npp_longterm_init = 10.  !! Initialisation value for npp_longterm (gC.m^{-2}.year^{-1})
!$OMP THREADPRIVATE(npp_longterm_init)
  REAL(r_std), SAVE :: everywhere_init = 0.05   !!
!$OMP THREADPRIVATE(everywhere_init)


  !
  ! stomate_alloc.f90
  !

  ! 0. Constants

  REAL(r_std), PARAMETER :: max_possible_lai = 10. !! (m^2.m^{-2})
  REAL(r_std), PARAMETER :: Nlim_Q10 = 10.         !!

  ! 1. Scalar

  LOGICAL, SAVE :: ok_minres = .TRUE.              !! [DISPENSABLE] Do we try to reach a minimum reservoir even if
                                                   !! we are severely stressed? (true/false)
!$OMP THREADPRIVATE(ok_minres)
  REAL(r_std), SAVE :: reserve_time_tree = 30.     !! Maximum number of days during which
                                                   !! carbohydrate reserve may be used for 
                                                   !! trees (days)
!$OMP THREADPRIVATE(reserve_time_tree)
  REAL(r_std), SAVE :: reserve_time_grass = 20.    !! Maximum number of days during which
                                                   !! carbohydrate reserve may be used for 
                                                   !! grasses (days)
!$OMP THREADPRIVATE(reserve_time_grass)

  REAL(r_std), SAVE :: f_fruit = 0.1               !! Default fruit allocation (0-1, unitless)
!$OMP THREADPRIVATE(f_fruit)
  REAL(r_std), SAVE :: alloc_sap_above_grass = 1.0 !! fraction of sapwood allocation above ground
                                                   !! for grass (0-1, unitless)
!$OMP THREADPRIVATE(alloc_sap_above_grass)
  REAL(r_std), SAVE :: min_LtoLSR = 0.2            !! Prescribed lower bounds for leaf 
                                                   !! allocation (0-1, unitless)
!$OMP THREADPRIVATE(min_LtoLSR)
  REAL(r_std), SAVE :: max_LtoLSR = 0.5            !! Prescribed upper bounds for leaf 
                                                   !! allocation (0-1, unitless)
!$OMP THREADPRIVATE(max_LtoLSR)
  REAL(r_std), SAVE :: z_nitrogen = 0.2            !! Curvature of the root profile (m)
!$OMP THREADPRIVATE(z_nitrogen)

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: Nlim_tref = 25.             !! (C)
!$OMP THREADPRIVATE(Nlim_tref)


  !
  ! stomate_data.f90 
  !

  ! 1. Scalar 

  ! 1.1 Parameters for the pipe model

  REAL(r_std), SAVE :: pipe_tune1 = 100.0        !! crown area = pipe_tune1. stem diameter**(1.6) (Reinicke's theory) (unitless)
!$OMP THREADPRIVATE(pipe_tune1)
  REAL(r_std), SAVE :: pipe_tune2 = 40.0         !! height=pipe_tune2 * diameter**pipe_tune3 (unitless)
!$OMP THREADPRIVATE(pipe_tune2)
  REAL(r_std), SAVE :: pipe_tune3 = 0.5          !! height=pipe_tune2 * diameter**pipe_tune3 (unitless)
!$OMP THREADPRIVATE(pipe_tune3)
  REAL(r_std), SAVE :: pipe_tune4 = 0.3          !! needed for stem diameter (unitless)
!$OMP THREADPRIVATE(pipe_tune4)
  REAL(r_std), SAVE :: pipe_density = 2.e5       !! Density
!$OMP THREADPRIVATE(pipe_density)
  REAL(r_std), SAVE :: pipe_k1 = 8.e3            !! one more SAVE
!$OMP THREADPRIVATE(pipe_k1)
  REAL(r_std), SAVE :: pipe_tune_exp_coeff = 1.6 !! pipe tune exponential coeff (unitless)
!$OMP THREADPRIVATE(pipe_tune_exp_coeff)

  ! 1.2 climatic parameters 

  REAL(r_std), SAVE :: precip_crit = 100.        !! minimum precip, in (mm/year)
!$OMP THREADPRIVATE(precip_crit)
  REAL(r_std), SAVE :: gdd_crit_estab = 150.     !! minimum gdd for establishment of saplings
!$OMP THREADPRIVATE(gdd_crit_estab)
  REAL(r_std), SAVE :: fpc_crit = 0.95           !! critical fpc, needed for light competition and establishment (0-1, unitless)
!$OMP THREADPRIVATE(fpc_crit)

  ! 1.3 sapling characteristics

  REAL(r_std), SAVE :: alpha_grass = 0.5         !! alpha coefficient for grasses (unitless)
!$OMP THREADPRIVATE(alpha_grass)
  REAL(r_std), SAVE :: alpha_tree = 1.           !! alpha coefficient for trees (unitless)
!$OMP THREADPRIVATE(alpha_tree)
  REAL(r_std), SAVE :: mass_ratio_heart_sap = 3. !! mass ratio (heartwood+sapwood)/sapwood (unitless)
!$OMP THREADPRIVATE(mass_ratio_heart_sap)

  ! 1.4  time scales for phenology and other processes (in days)

  REAL(r_std), SAVE :: tau_hum_month = 20.        !! (days)       
!$OMP THREADPRIVATE(tau_hum_month)
  REAL(r_std), SAVE :: tau_hum_week = 7.          !! (days)  
!$OMP THREADPRIVATE(tau_hum_week)
  REAL(r_std), SAVE :: tau_t2m_month = 20.        !! (days)      
!$OMP THREADPRIVATE(tau_t2m_month)
  REAL(r_std), SAVE :: tau_t2m_week = 7.          !! (days)  
!$OMP THREADPRIVATE(tau_t2m_week)
  REAL(r_std), SAVE :: tau_tsoil_month = 20.      !! (days)     
!$OMP THREADPRIVATE(tau_tsoil_month)
  REAL(r_std), SAVE :: tau_soilhum_month = 20.    !! (days)     
!$OMP THREADPRIVATE(tau_soilhum_month)
  REAL(r_std), SAVE :: tau_gpp_week = 7.          !! (days)  
!$OMP THREADPRIVATE(tau_gpp_week)
  REAL(r_std), SAVE :: tau_gdd = 40.              !! (days)  
!$OMP THREADPRIVATE(tau_gdd)
  REAL(r_std), SAVE :: tau_ngd = 50.              !! (days)  
!$OMP THREADPRIVATE(tau_ngd)
  REAL(r_std), SAVE :: coeff_tau_longterm = 3.    !! (unitless)
!$OMP THREADPRIVATE(coeff_tau_longterm)
  REAL(r_std), SAVE :: tau_longterm_max           !! (days)  
!$OMP THREADPRIVATE(tau_longterm_max)

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: bm_sapl_carbres = 5.             !!
!$OMP THREADPRIVATE(bm_sapl_carbres)
  REAL(r_std), SAVE :: bm_sapl_sapabove = 0.5           !!
!$OMP THREADPRIVATE(bm_sapl_sapabove)
  REAL(r_std), SAVE :: bm_sapl_heartabove = 2.          !!
!$OMP THREADPRIVATE(bm_sapl_heartabove)
  REAL(r_std), SAVE :: bm_sapl_heartbelow = 2.          !!
!$OMP THREADPRIVATE(bm_sapl_heartbelow)
  REAL(r_std), SAVE :: init_sapl_mass_leaf_nat = 0.1    !!
!$OMP THREADPRIVATE(init_sapl_mass_leaf_nat)
  REAL(r_std), SAVE :: init_sapl_mass_leaf_agri = 1.    !!
!$OMP THREADPRIVATE(init_sapl_mass_leaf_agri)
  REAL(r_std), SAVE :: init_sapl_mass_carbres = 5.      !!
!$OMP THREADPRIVATE(init_sapl_mass_carbres)
  REAL(r_std), SAVE :: init_sapl_mass_root = 0.1        !!
!$OMP THREADPRIVATE(init_sapl_mass_root)
  REAL(r_std), SAVE :: init_sapl_mass_fruit = 0.3       !!  
!$OMP THREADPRIVATE(init_sapl_mass_fruit)
  REAL(r_std), SAVE :: cn_sapl_init = 0.5               !!
!$OMP THREADPRIVATE(cn_sapl_init)
  REAL(r_std), SAVE :: migrate_tree = 10.*1.E3          !!
!$OMP THREADPRIVATE(migrate_tree)
  REAL(r_std), SAVE :: migrate_grass = 10.*1.E3         !!
!$OMP THREADPRIVATE(migrate_grass)
  REAL(r_std), SAVE :: lai_initmin_tree = 0.3           !!
!$OMP THREADPRIVATE(lai_initmin_tree)
  REAL(r_std), SAVE :: lai_initmin_grass = 0.1          !!
!$OMP THREADPRIVATE(lai_initmin_grass)
  REAL(r_std), SAVE, DIMENSION(2) :: dia_coeff = (/ 4., 0.5 /)            !!
!$OMP THREADPRIVATE(dia_coeff)
  REAL(r_std), SAVE, DIMENSION(2) :: maxdia_coeff =(/ 100., 0.01/)        !!
!$OMP THREADPRIVATE(maxdia_coeff)
  REAL(r_std), SAVE, DIMENSION(4) :: bm_sapl_leaf = (/ 4., 4., 0.8, 5./)  !!
!$OMP THREADPRIVATE(bm_sapl_leaf)



  !
  ! stomate_litter.f90 
  !

  ! 0. Constants

  REAL(r_std), PARAMETER :: Q10 = 10.               !!

  ! 1. Scalar

  REAL(r_std), SAVE :: z_decomp = 0.2               !!  Maximum depth for soil decomposer's activity (m)
!$OMP THREADPRIVATE(z_decomp)

  ! 2. Arrays

  REAL(r_std), SAVE :: frac_soil_struct_aa = 0.55   !! corresponding to frac_soil(istructural,iactive,iabove) 
!$OMP THREADPRIVATE(frac_soil_struct_aa)
  REAL(r_std), SAVE :: frac_soil_struct_ab = 0.45   !! corresponding to frac_soil(istructural,iactive,ibelow)
!$OMP THREADPRIVATE(frac_soil_struct_ab)
  REAL(r_std), SAVE :: frac_soil_struct_sa = 0.7    !! corresponding to frac_soil(istructural,islow,iabove)
!$OMP THREADPRIVATE(frac_soil_struct_sa)
  REAL(r_std), SAVE :: frac_soil_struct_sb = 0.7    !! corresponding to frac_soil(istructural,islow,ibelow)
!$OMP THREADPRIVATE(frac_soil_struct_sb)
  REAL(r_std), SAVE :: frac_soil_metab_aa = 0.45    !! corresponding to frac_soil(imetabolic,iactive,iabove)
!$OMP THREADPRIVATE(frac_soil_metab_aa)
  REAL(r_std), SAVE :: frac_soil_metab_ab = 0.45    !! corresponding to frac_soil(imetabolic,iactive,ibelow)
!$OMP THREADPRIVATE(frac_soil_metab_ab)
  REAL(r_std), SAVE, DIMENSION(nparts) :: CN = &    !! C/N ratio of each plant pool (0-100, unitless)
       & (/ 40., 40., 40., 40., 40., 40., 40., 40. /) 
!$OMP THREADPRIVATE(CN)
  REAL(r_std), SAVE, DIMENSION(nparts) :: LC = &    !! Lignin/C ratio of different plant parts (0,22-0,35, unitless)
       & (/ 0.22, 0.35, 0.35, 0.35, 0.35, 0.22, 0.22, 0.22 /)
!$OMP THREADPRIVATE(LC)

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: metabolic_ref_frac = 0.85    !! used by litter and soilcarbon (0-1, unitless)
!$OMP THREADPRIVATE(metabolic_ref_frac)
  REAL(r_std), SAVE :: metabolic_LN_ratio = 0.018   !! (0-1, unitless)   
!$OMP THREADPRIVATE(metabolic_LN_ratio)
  REAL(r_std), SAVE :: tau_metabolic = 0.066        !!
!$OMP THREADPRIVATE(tau_metabolic)
  REAL(r_std), SAVE :: tau_struct = 0.245           !!
!$OMP THREADPRIVATE(tau_struct)
  REAL(r_std), SAVE :: soil_Q10 = 0.69              !!= ln 2
!$OMP THREADPRIVATE(soil_Q10)
  REAL(r_std), SAVE :: tsoil_ref = 30.              !!
!$OMP THREADPRIVATE(tsoil_ref)
  REAL(r_std), SAVE :: litter_struct_coef = 3.      !! 
!$OMP THREADPRIVATE(litter_struct_coef)
  REAL(r_std), SAVE, DIMENSION(3) :: moist_coeff = (/ 1.1,  2.4,  0.29 /) !!
!$OMP THREADPRIVATE(moist_coeff)
  REAL(r_std), SAVE :: moistcont_min = 0.25  !! minimum soil wetness to limit the heterotrophic respiration
!$OMP THREADPRIVATE(moistcont_min)


  !
  ! stomate_lpj.f90
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: frac_turnover_daily = 0.55  !! (0-1, unitless)
!$OMP THREADPRIVATE(frac_turnover_daily)


  !
  ! stomate_npp.f90 
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: tax_max = 0.8 !! Maximum fraction of allocatable biomass used 
                                     !! for maintenance respiration (0-1, unitless)
!$OMP THREADPRIVATE(tax_max)


  !
  ! stomate_phenology.f90
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: min_growthinit_time = 300.  !! minimum time since last beginning of a growing season (days)
!$OMP THREADPRIVATE(min_growthinit_time)
  REAL(r_std), SAVE :: moiavail_always_tree = 1.0  !! moisture monthly availability above which moisture tendency doesn't matter
                                                   !!  - for trees (0-1, unitless)
!$OMP THREADPRIVATE(moiavail_always_tree)
  REAL(r_std), SAVE :: moiavail_always_grass = 0.6 !! moisture monthly availability above which moisture tendency doesn't matter
                                                   !! - for grass (0-1, unitless)
!$OMP THREADPRIVATE(moiavail_always_grass)
  REAL(r_std), SAVE :: t_always                    !! monthly temp. above which temp. tendency doesn't matter
!$OMP THREADPRIVATE(t_always)
  REAL(r_std), SAVE :: t_always_add = 10.          !! monthly temp. above which temp. tendency doesn't matter (C)
!$OMP THREADPRIVATE(t_always_add)

  ! 3. Coefficients of equations
  
  REAL(r_std), SAVE :: gddncd_ref = 603.           !!
!$OMP THREADPRIVATE(gddncd_ref)
  REAL(r_std), SAVE :: gddncd_curve = 0.0091       !!
!$OMP THREADPRIVATE(gddncd_curve)
  REAL(r_std), SAVE :: gddncd_offset = 64.         !!
!$OMP THREADPRIVATE(gddncd_offset)


  !
  ! stomate_prescribe.f90
  !

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: bm_sapl_rescale = 40.       !!
!$OMP THREADPRIVATE(bm_sapl_rescale)


  !
  ! stomate_resp.f90
  !

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: maint_resp_min_vmax = 0.3   !!
!$OMP THREADPRIVATE(maint_resp_min_vmax)
  REAL(r_std), SAVE :: maint_resp_coeff = 1.4      !!
!$OMP THREADPRIVATE(maint_resp_coeff)


  !
  ! stomate_soilcarbon.f90 
  !

  ! 2. Arrays 

  ! 2.1 frac_carb_coefficients

  REAL(r_std), SAVE :: frac_carb_ap = 0.004  !! from active pool: depends on clay content  (0-1, unitless)
                                             !! corresponding to frac_carb(:,iactive,ipassive)
!$OMP THREADPRIVATE(frac_carb_ap)
  REAL(r_std), SAVE :: frac_carb_sa = 0.42   !! from slow pool (0-1, unitless)
                                             !! corresponding to frac_carb(:,islow,iactive)
!$OMP THREADPRIVATE(frac_carb_sa)
  REAL(r_std), SAVE :: frac_carb_sp = 0.03   !! from slow pool (0-1, unitless) 
                                             !! corresponding to frac_carb(:,islow,ipassive)
!$OMP THREADPRIVATE(frac_carb_sp)
  REAL(r_std), SAVE :: frac_carb_pa = 0.45   !! from passive pool (0-1, unitless)
                                             !! corresponding to frac_carb(:,ipassive,iactive)
!$OMP THREADPRIVATE(frac_carb_pa)
  REAL(r_std), SAVE :: frac_carb_ps = 0.0    !! from passive pool (0-1, unitless)
                                             !! corresponding to frac_carb(:,ipassive,islow)
!$OMP THREADPRIVATE(frac_carb_ps)

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: active_to_pass_clay_frac = 0.68  !! (0-1, unitless)
!$OMP THREADPRIVATE(active_to_pass_clay_frac)
  !! residence times in carbon pools (days)
  REAL(r_std), SAVE :: carbon_tau_iactive = 0.149   !! residence times in active pool (days)
!$OMP THREADPRIVATE(carbon_tau_iactive)
  REAL(r_std), SAVE :: carbon_tau_islow = 7.0       !! residence times in slow pool (days)
!$OMP THREADPRIVATE(carbon_tau_islow)
  REAL(r_std), SAVE :: carbon_tau_ipassive = 300.   !! residence times in passive pool (days)
!$OMP THREADPRIVATE(carbon_tau_ipassive)
  REAL(r_std), SAVE, DIMENSION(3) :: flux_tot_coeff = (/ 1.2, 1.4, .75/)
!$OMP THREADPRIVATE(flux_tot_coeff)

  !
  ! stomate_turnover.f90
  !

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: new_turnover_time_ref = 20. !!(days)
!$OMP THREADPRIVATE(new_turnover_time_ref)
  REAL(r_std), SAVE :: leaf_age_crit_tref = 20.    !! (C)
!$OMP THREADPRIVATE(leaf_age_crit_tref)
  REAL(r_std), SAVE, DIMENSION(3) :: leaf_age_crit_coeff = (/ 1.5, 0.75, 10./) !! (unitless)
!$OMP THREADPRIVATE(leaf_age_crit_coeff)


  !
  ! stomate_vmax.f90
  !
 
  ! 1. Scalar

  REAL(r_std), SAVE :: vmax_offset = 0.3        !! minimum leaf efficiency (unitless)
!$OMP THREADPRIVATE(vmax_offset)
  REAL(r_std), SAVE :: leafage_firstmax = 0.03  !! relative leaf age at which efficiency
                                                !! reaches 1 (unitless)
!$OMP THREADPRIVATE(leafage_firstmax)
  REAL(r_std), SAVE :: leafage_lastmax = 0.5    !! relative leaf age at which efficiency
                                                !! falls below 1 (unitless)
!$OMP THREADPRIVATE(leafage_lastmax)
  REAL(r_std), SAVE :: leafage_old = 1.         !! relative leaf age at which efficiency
                                                !! reaches its minimum (vmax_offset) 
                                                !! (unitless)
!$OMP THREADPRIVATE(leafage_old)
  !
  ! stomate_season.f90 
  !

  ! 1. Scalar

  REAL(r_std), SAVE :: gppfrac_dormance = 0.2  !! report maximal GPP/GGP_max for dormance (0-1, unitless)
!$OMP THREADPRIVATE(gppfrac_dormance)
  REAL(r_std), SAVE :: tau_climatology = 20.   !! tau for "climatologic variables (years)
!$OMP THREADPRIVATE(tau_climatology)
  REAL(r_std), SAVE :: hvc1 = 0.019            !! parameters for herbivore activity (unitless)
!$OMP THREADPRIVATE(hvc1)
  REAL(r_std), SAVE :: hvc2 = 1.38             !! parameters for herbivore activity (unitless)
!$OMP THREADPRIVATE(hvc2)
  REAL(r_std), SAVE :: leaf_frac_hvc = 0.33    !! leaf fraction (0-1, unitless)
!$OMP THREADPRIVATE(leaf_frac_hvc)
  REAL(r_std), SAVE :: tlong_ref_max = 303.1   !! maximum reference long term temperature (K)
!$OMP THREADPRIVATE(tlong_ref_max)
  REAL(r_std), SAVE :: tlong_ref_min = 253.1   !! minimum reference long term temperature (K)
!$OMP THREADPRIVATE(tlong_ref_min)

  ! 3. Coefficients of equations

  REAL(r_std), SAVE :: ncd_max_year = 3.
!$OMP THREADPRIVATE(ncd_max_year)
  REAL(r_std), SAVE :: gdd_threshold = 5.
!$OMP THREADPRIVATE(gdd_threshold)
  REAL(r_std), SAVE :: green_age_ever = 2.
!$OMP THREADPRIVATE(green_age_ever)
  REAL(r_std), SAVE :: green_age_dec = 0.5
!$OMP THREADPRIVATE(green_age_dec)

END MODULE constantes_var