Context Navigation

orchidee.default @ 7475

Last change on this file since 7475 was 7475, checked in by josefine.ghattas, 2 years ago
Update orchidee.default using the tool create_orchidee_defalut.sh tool. Note that manual modifications in orchidee.default are overwritten. Reported some of the changes done previously in orchidee.default to the fortran source code. Note also that all sections in !Config must be there to have the tool working. Therfore added some missing !Config If lines.
File size: 73.0 KB

Line
1	#
2	#
3	# WARNING !!!
4	# DO NOT MODIFY THIS FILE.
5	# THIS FILE IS ONLY PROVIDING INFORMATION ABOUT DEFAULT PARAMETER SETTINGS IN ORCHIDEE.
6	#
7	#*******************************************************************************************
8	# Namelist for ORCHIDEE
9	#*******************************************************************************************
10	#
11	# For more details, see : http://forge.ipsl.jussieu.fr/orchidee/wiki/Documentation/OrchideeParameters
12	#
13	# Note : [m] : meters; [K] : Kelvin degrees; [C] : Celsius degrees
14	#
15
16	#*******************************************************************************************
17	# ORCHIDEE driver parameters (read in Off-line mode only)
18	#*******************************************************************************************
19
20	# LWDOWN_CONS ([FLAG]) : Conserve longwave downwelling radiation in the forcing {}
21	LWDOWN_CONS = n
22
23	# SWDOWN_CONS ([FLAG]) : Conserve shortwave downwelling radiation in the forcing {}
24	SWDOWN_CONS = LWDOWN_CONS
25
26	# FORCING_FILE ([FILE] ) : Name of file containing the forcing data {[-]}
27	FORCING_FILE = forcing_file.nc
28
29	# DT_SECHIBA ([seconds]) : Time-step of the SECHIBA component {NOT(WEATHERGEN)}
30	DT_SECHIBA = 1800.
31
32	# RESTART_FILEIN ([FILE]) : Name of restart to READ for initial conditions {[-]}
33	RESTART_FILEIN = NONE
34
35	# RESTART_FILEOUT ([FILE]) : Name of restart files to be created by the driver {[-]}
36	RESTART_FILEOUT = driver_rest_out.nc
37
38	# DRIVER_reset_time ([FLAG]) : Overwrite time values from the driver restart file {[-]}
39	DRIVER_reset_time = n
40
41	# TIME_SKIP ([seconds, days, months, years]) : Time in the forcing file at which the model is started. {[-]}
42	TIME_SKIP = 0
43
44	# TIME_LENGTH ([seconds, days, months, years]) : Length of the integration in time. {[-]}
45	TIME_LENGTH = Full length of the forcing file
46
47	# RELAXATION ([FLAG]) : method of forcing {[-]}
48	RELAXATION = n
49
50	# RELAX_A ([days?]) : Time constant of the relaxation layer {RELAXATION}
51	RELAX_A = 1.0
52
53	# SPREAD_PREC ([nb of dt_sechiba]) : On how long we spread the precipitation {[orchidee_ol]}
54	SPREAD_PREC = Half of the forcing time step or uniform, depending on dt_force and dt_sechiba
55
56	# ATM_CO2 ([ppm]) : Value to precribe atmosoheric CO2 {[FORCE_CO2_VEG=y or Offline mode]}
57	ATM_CO2 = 350.
58
59	# SPREAD_PREC ([FLAG]) : Spread the precipitation. {orchideedriver}
60	SPREAD_PREC = Spread the precipitation.
61
62	# SPREAD_PREC_SEC ([-]) : On how long we spread the precipitation {orchideedriver and nb_spread < 0}
63	SPREAD_PREC_SEC = 3600
64
65	# SPREAD_PREC_CONT ([s]) : Take into account precipitation on the next forcing step for spreading it. {orchideedriver}
66	SPREAD_PREC_CONT = FALSE
67
68	# ALLOW_WEATHERGEN ([FLAG]) : Allow weather generator to create data {[-]}
69	ALLOW_WEATHERGEN = n
70
71	# DT_WEATHGEN ([seconds]) : Calling frequency of weather generator {ALLOW_WEATHERGEN}
72	DT_WEATHGEN = 1800.
73
74	# LIMIT_WEST ([Degrees] ) : Western limit of region {[-]}
75	LIMIT_WEST = -180.
76
77	# LIMIT_EAST ([Degrees] ) : Eastern limit of region {[-]}
78	LIMIT_EAST = 180.
79
80	# LIMIT_NORTH ([Degrees]) : Northern limit of region {[-]}
81	LIMIT_NORTH = 90.
82
83	# LIMIT_SOUTH ([Degrees]) : Southern limit of region {[-]}
84	LIMIT_SOUTH = -90.
85
86	# MERID_RES ([Degrees]) : North-South Resolution {ALLOW_WEATHERGEN}
87	MERID_RES = 2.
88
89	# ZONAL_RES ([Degrees] ) : East-West Resolution {ALLOW_WEATHERGEN}
90	ZONAL_RES = 2.
91
92	# HEIGHT_LEV1 ([m]) : Height at which T and Q are given {offline mode}
93	HEIGHT_LEV1 = 2.0
94
95	# HEIGHT_LEVW ([m]) : Height at which the wind is given {offline mode}
96	HEIGHT_LEVW = 10.0
97
98	# NBUFF (-) : Number of time steps of data to buffer between each reading of the forcing file {OFF_LINE}
99	NBUFF = 1
100
101	# IPPREC ([-] ) : Use prescribed values {ALLOW_WEATHERGEN}
102	IPPREC = 0
103
104	# WEATHGEN_PRECIP_EXACT ([FLAG]) : Exact monthly precipitation {ALLOW_WEATHERGEN}
105	WEATHGEN_PRECIP_EXACT = n
106
107	# DUMP_WEATHER ([FLAG]) : Write weather from generator into a forcing file {ALLOW_WEATHERGEN }
108	DUMP_WEATHER = n
109
110	# DUMP_WEATHER_FILE ([FILE]) : Name of the file that contains the weather from generator {DUMP_WEATHER}
111	DUMP_WEATHER_FILE = weather_dump.nc
112
113	# DUMP_WEATHER_GATHERED ([FLAG]) : Dump weather data on gathered grid {DUMP_WEATHER}
114	DUMP_WEATHER_GATHERED = y
115
116	# HEIGHT_LEV1_DUMP ([m]) : {DUMP_WEATHER}
117	HEIGHT_LEV1_DUMP = 10.
118
119	#*******************************************************************************************
120	# ORCHIDEE parameters
121	#*******************************************************************************************
122
123	# SOILTYPE_CLASSIF ([-]) : Type of soil texture classification (for hydraulic and thermic properties) {!IMPOSE_VEG}
124	SOILTYPE_CLASSIF = zobler
125
126	# RIVER_ROUTING ([FLAG]) : Decides if we route the water or not {OK_SECHIBA}
127	RIVER_ROUTING = y
128
129	# DO_IRRIGATION ([FLAG]) : Should we compute an irrigation flux {RIVER_ROUTING }
130	DO_IRRIGATION = n
131
132	# DO_FLOODPLAINS ([FLAG] ) : Should we include floodplains {RIVER_ROUTING }
133	DO_FLOODPLAINS = n
134
135	# STOMATE_OK_STOMATE ([FLAG]) : Activate STOMATE? {OK_SECHIBA}
136	STOMATE_OK_STOMATE = y
137
138	# DO_WOOD_HARVEST ([FLAG]) : Activate Wood Harvest ? {OK_STOMATE}
139	DO_WOOD_HARVEST = y
140
141	# STOMATE_OK_DGVM ([FLAG]) : Activate DGVM? {OK_STOMATE}
142	STOMATE_OK_DGVM = n
143
144	# CHEMISTRY_BVOC ([FLAG]) : Activate calculations for BVOC {OK_SECHIBA}
145	CHEMISTRY_BVOC = n
146
147	# CHEMISTRY_LEAFAGE ([FLAG]) : Activate LEAFAGE? {CHEMISTRY_BVOC}
148	CHEMISTRY_LEAFAGE = n
149
150	# CANOPY_EXTINCTION ([FLAG]) : Use canopy radiative transfer model? {CHEMISTRY_BVOC }
151	CANOPY_EXTINCTION = n
152
153	# CANOPY_MULTILAYER ([FLAG]) : Use canopy radiative transfer model with multi-layers {CANOPY_EXTINCTION }
154	CANOPY_MULTILAYER = n
155
156	# NOx_RAIN_PULSE ([FLAG]) : Calculate NOx emissions with pulse? {CHEMISTRY_BVOC }
157	NOx_RAIN_PULSE = n
158
159	# NOx_BBG_FERTIL ([FLAG]) : Calculate NOx emissions with bbg fertilizing effect? {CHEMISTRY_BVOC }
160	NOx_BBG_FERTIL = n
161
162	# NOx_FERTILIZERS_USE ([FLAG] ) : Calculate NOx emissions with fertilizers use? {CHEMISTRY_BVOC }
163	NOx_FERTILIZERS_USE = n
164
165	# NVM ([-]) : number of PFTs {OK_SECHIBA or OK_STOMATE}
166	NVM = 13
167
168	# IMPOSE_PARAM ([FLAG]) : Do you impose the values of the parameters? {OK_SECHIBA or OK_STOMATE}
169	IMPOSE_PARAM = y
170
171	# DEPTH_MAX_T (m) : Maximum depth of the soil thermodynamics {}
172	DEPTH_MAX_T = 90.0
173
174	# DEPTH_MAX_H (m) : Maximum depth of soil moisture {}
175	DEPTH_MAX_H = 2.0
176
177	# DEPTH_TOPTHICK (m) : Thickness of upper most Layer {}
178	DEPTH_TOPTHICK = 9.77517107e-04
179
180	# DEPTH_CSTTHICK (m) : Depth at which constant layer thickness start {}
181	DEPTH_CSTTHICK = DEPTH_MAX_H
182
183	# REFINEBOTTOM (-) : Depth at which the hydrology layers will be refined towards the bottom. {}
184	REFINEBOTTOM = .FALSE.
185
186	# DEPTH_GEOM (m) : Depth at which we resume geometrical increases for temperature {}
187	DEPTH_GEOM = DEPTH_MAX_H
188
189	# RATIO_GEOM_BELOW (-) : Ratio of the geometrical series defining the thickness below DEPTH_GEOM {}
190	RATIO_GEOM_BELOW = 2
191
192	# ALMA_OUTPUT ([FLAG]) : Should the output follow the ALMA convention {OK_SECHIBA}
193	ALMA_OUTPUT = n
194
195	# OUTPUT_FILE ([FILE]) : Name of file in which the output is going to be written {OK_SECHIBA}
196	OUTPUT_FILE = sechiba_history.nc
197
198	# WRITE_STEP ([seconds]) : Frequency in seconds for sechiba_history.nc file with IOIPSL {OK_SECHIBA, NOT XIOS_ORCHIDEE_OK}
199	WRITE_STEP = 86400.
200
201	# SECHIBA_HISTLEVEL ([-]) : SECHIBA history output level (0..10) {OK_SECHIBA and HF}
202	SECHIBA_HISTLEVEL = 5
203
204	# SECHIBA_HISTFILE2 ([FLAG]) : Flag to switch on histfile 2 for SECHIBA (hi-frequency ?) {OK_SECHIBA}
205	SECHIBA_HISTFILE2 = n
206
207	# WRITE_STEP2 ([seconds]) : Frequency in seconds at which to WRITE output {SECHIBA_HISTFILE2}
208	WRITE_STEP2 = 1800.0
209
210	# SECHIBA_OUTPUT_FILE2 ([FILE]) : Name of file in which the output number 2 is going to be written {SECHIBA_HISTFILE2}
211	SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc
212
213	# SECHIBA_HISTLEVEL2 ([-] ) : SECHIBA history 2 output level (0..10) {SECHIBA_HISTFILE2}
214	SECHIBA_HISTLEVEL2 = 1
215
216	# STOMATE_OUTPUT_FILE ([FILE]) : Name of file in which STOMATE's output is going to be written {OK_STOMATE}
217	STOMATE_OUTPUT_FILE = stomate_history.nc
218
219	# STOMATE_HIST_DT ([days]) : STOMATE history time step {OK_STOMATE}
220	STOMATE_HIST_DT = 10.
221
222	# STOMATE_IPCC_OUTPUT_FILE ([FILE]) : Name of file in which STOMATE's output is going to be written {OK_STOMATE}
223	STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc
224
225	# STOMATE_IPCC_HIST_DT ([days]) : STOMATE IPCC history time step {OK_STOMATE}
226	STOMATE_IPCC_HIST_DT = 0.
227
228	# OK_HISTSYNC ([FLAG]) : Syncronize and write IOIPSL output files at each time step {}
229	OK_HISTSYNC = FALSE
230
231	# STOMATE_HISTLEVEL ([-]) : STOMATE history output level (0..10) {OK_STOMATE}
232	STOMATE_HISTLEVEL = 10
233
234	# SECHIBA_restart_in ([FILE]) : Name of restart to READ for initial conditions {OK_SECHIBA }
235	SECHIBA_restart_in = NONE
236
237	# SECHIBA_rest_out ([FILE]) : Name of restart files to be created by SECHIBA {OK_SECHIBA}
238	SECHIBA_rest_out = sechiba_rest_out.nc
239
240	# STOMATE_RESTART_FILEIN ([FILE]) : Name of restart to READ for initial conditions of STOMATE {STOMATE_OK_STOMATE}
241	STOMATE_RESTART_FILEIN = NONE
242
243	# STOMATE_RESTART_FILEOUT ([FILE]) : Name of restart files to be created by STOMATE {STOMATE_OK_STOMATE}
244	STOMATE_RESTART_FILEOUT = stomate_rest_out.nc
245
246	# FORCE_CO2_VEG ([FLAG]) : Flag to force the value of atmospheric CO2 for vegetation. {Only in coupled mode}
247	FORCE_CO2_VEG = FALSE
248
249	# TAU_OUTFLOW ([days]) : Number of days over which the coastal- and riverflow will be distributed {Only in coupled mode}
250	TAU_OUTFLOW = 0
251
252	# ECCENTRICITY ([-]) : Use prescribed values {ALLOW_WEATHERGEN}
253	ECCENTRICITY = 0.016724
254
255	# PERIHELIE ([-]) : Use prescribed values {ALLOW_WEATHERGEN}
256	PERIHELIE = 102.04
257
258	# OBLIQUITY ([Degrees]) : Use prescribed values {ALLOW_WEATHERGEN}
259	OBLIQUITY = 23.446
260
261	# PFT_TO_MTC ([-]) : correspondance array linking a PFT to MTC {OK_SECHIBA or OK_STOMATE}
262	PFT_TO_MTC = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
263
264	# PFT_NAME ([-]) : Name of a PFT {OK_SECHIBA or OK_STOMATE}
265	PFT_NAME = bare ground, tropical broad-leaved evergreen, tropical broad-leaved raingreen, temperate needleleaf evergreen, temperate broad-leaved evergreen, temperate broad-leaved summergreen, boreal needleleaf evergreen, boreal broad-leaved summergreen, boreal needleleaf summergreen, C3 grass, C4 grass, C3 agriculture, C4 agriculture
266
267	# LEAF_TAB ([-] ) : leaf type : 1 {OK_STOMATE}
268	LEAF_TAB = 4, 1, 1, 2, 1, 1, 2, 1, 2, 3, 3, 3, 3
269
270	# PHENO_MODEL ([-] ) : which phenology model is used? (tabulated) {OK_STOMATE}
271	PHENO_MODEL = none, none, moi, none, none, ncdgdd, none, ncdgdd, ngd, moigdd, moigdd, moigdd, moigdd
272
273	# SECHIBA_LAI ([m^2/m^2]) : laimax for maximum lai(see also type of lai interpolation) {OK_SECHIBA or IMPOSE_VEG}
274	SECHIBA_LAI = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2.
275
276	# LLAIMIN ([m^2/m^2]) : laimin for minimum lai(see also type of lai interpolation) {OK_SECHIBA or IMPOSE_VEG}
277	LLAIMIN = 0., 8., 0., 4., 4.5, 0., 4., 0., 0., 0., 0., 0., 0.
278
279	# SLOWPROC_HEIGHT ([m] ) : prescribed height of vegetation {OK_SECHIBA}
280	SLOWPROC_HEIGHT = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1., 1.
281
282	# Z0_OVER_HEIGHT ([-] ) : factor to calculate roughness height from height of canopy {OK_SECHIBA}
283	Z0_OVER_HEIGHT = 0., 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625
284
285	# RATIO_Z0M_Z0H ([-]) : Ratio between z0m and z0h {OK_SECHIBA}
286	RATIO_Z0M_Z0H = 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0
287
288	# TYPE_OF_LAI ([-]) : Type of behaviour of the LAI evolution algorithm {OK_SECHIBA}
289	TYPE_OF_LAI = inter, inter, inter, inter, inter, inter, inter, inter, inter, inter, inter, inter, inter
290
291	# NATURAL ([BOOLEAN]) : natural? {OK_SECHIBA, OK_STOMATE}
292	NATURAL = y, y, y, y, y, y, y, y, y, y, y, n, n
293
294	# IS_C4 ([BOOLEAN]) : flag for C4 vegetation types {OK_SECHIBA or OK_STOMATE}
295	IS_C4 = n, n, n, n, n, n, n, n, n, n, n, y, n, y
296
297	# VCMAX_FIX ([micromol/m^2/s] ) : values used for vcmax when STOMATE is not activated {OK_SECHIBA and NOT(OK_STOMATE)}
298	VCMAX_FIX = 0., 40., 50., 30., 35., 40.,30., 40., 35., 60., 60., 70., 70.
299
300	# DOWNREG_CO2 ([-]) : coefficient for CO2 downregulation (unitless) {OK_CO2 and DOWNREGULATION_CO2}
301	DOWNREG_CO2 = 0., 0.38, 0.38, 0.28, 0.28, 0.28, 0.22, 0.22, 0.22, 0.26, 0.26, 0.26, 0.26
302
303	# DOWNREG_CO2_NEW ([-]) : coefficient for CO2 downregulation (unitless) {OK_CO2 and DOWNREGULATION_CO2_NEW}
304	DOWNREG_CO2_NEW = 0., 0.35, 0.35, 0.26, 0.26, 0.26, 0.20, 0.20, 0.20, 0.24, 0.03, 0.24, 0.03
305
306	# E_KmC ([J mol-1]) : Energy of activation for KmC {}
307	E_KmC = -9999., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430.
308
309	# E_KmO ([J mol-1]) : Energy of activation for KmO {}
310	E_KmO = -9999., 36380., 36380., 36380., 36380., 36380., 36380., 36380., 36380., 36380., 36380., 36380., 36380.
311
312	# E_Sco ([J mol-1]) : Energy of activation for Sco {}
313	E_Sco = -9999., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460.
314
315	# E_gamma_star ([J mol-1]) : Energy of activation for gamma_star {}
316	E_gamma_star = -9999., 37830., 37830., 37830., 37830., 37830., 37830., 37830., 37830., 37830., 37830., 37830., 37830.
317
318	# E_Vcmax ([J mol-1]) : Energy of activation for Vcmax {}
319	E_Vcmax = -9999., 71513., 71513., 71513., 71513., 71513., 71513., 71513., 71513., 71513., 67300., 71513., 67300.
320
321	# E_Jmax ([J mol-1]) : Energy of activation for Jmax {}
322	E_Jmax = -9999., 49884., 49884., 49884., 49884., 49884., 49884., 49884., 49884., 49884., 77900., 49884., 77900.
323
324	# aSV ([J K-1 mol-1]) : a coefficient of the linear regression (a+bT) defining the Entropy term for Vcmax {}
325	aSV = -9999., 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 641.64, 668.39, 641.64
326
327	# bSV ([J K-1 mol-1 Â°C-1]) : b coefficient of the linear regression (a+bT) defining the Entropy term for Vcmax {}
328	bSV = -9999., -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, 0., -1.07, 0.
329
330	# TPHOTO_MIN ([-]) : minimum photosynthesis temperature (deg C) {OK_STOMATE}
331	TPHOTO_MIN = -9999., -4., -4., -4., -4.,-4.,-4., -4., -4., -4., -4., -4., -4.
332
333	# TPHOTO_MAX ([-]) : maximum photosynthesis temperature (deg C) {OK_STOMATE}
334	TPHOTO_MAX = -9999., 55., 55., 55., 55., 55., 55., 55., 55., 55., 55., 55., 55.
335
336	# aSJ ([J K-1 mol-1]) : a coefficient of the linear regression (a+bT) defining the Entropy term for Jmax {}
337	aSJ = -9999., 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 630., 659.70, 630.
338
339	# bSJ ([J K-1 mol-1 Â°C-1]) : b coefficient of the linear regression (a+bT) defining the Entropy term for Jmax {}
340	bSJ = -9999., -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, 0., -0.75, 0.
341
342	# D_Vcmax ([J mol-1]) : Energy of deactivation for Vcmax {}
343	D_Vcmax = -9999., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 192000., 200000., 192000.
344
345	# D_Jmax ([J mol-1]) : Energy of deactivation for Jmax {}
346	D_Jmax = -9999., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 192000., 200000., 192000.
347
348	# E_gm ([J mol-1] ) : Energy of activation for gm { }
349	E_gm = -9999., 49600., 49600., 49600., 49600., 49600., 49600., 49600., 49600., 49600., -9999., 49600., -9999.
350
351	# S_gm ([J K-1 mol-1] ) : Entropy term for gm { }
352	S_gm = -9999., 1400., 1400., 1400., 1400., 1400., 1400., 1400., 1400., 1400., -9999., 1400., -9999.
353
354	# D_gm ([J mol-1] ) : Energy of deactivation for gm { }
355	D_gm = -9999., 437400., 437400., 437400., 437400., 437400., 437400., 437400., 437400., 437400., -9999., 437400., -9999.
356
357	# E_Rd ([J mol-1]) : Energy of activation for Rd {}
358	E_Rd = -9999., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390.
359
360	# VCMAX25 ([micromol/m^2/s]) : Maximum rate of Rubisco activity-limited carboxylation at 25Â°C {OK_STOMATE}
361	VCMAX25 = -9999., 45.0, 45.0, 35.0, 40.0, 50.0, 45.0, 35.0, 35.0, 50.0, 50.0, 60.0, 60.0
362
363	# ARJV ([mu mol e- (mu mol CO2)-1]) : a coefficient of the linear regression (a+bT) defining the Jmax25/Vcmax25 ratio {OK_STOMATE}
364	ARJV = -9999., 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 1.715, 2.59, 1.715
365
366	# BRJV ([(mu mol e- (mu mol CO2)-1) (Â°C)-1]) : b coefficient of the linear regression (a+bT) defining the Jmax25/Vcmax25 ratio {OK_STOMATE}
367	BRJV = -9999., -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, 0., -0.035, 0.
368
369	# KmC25 ([ubar]) : MichaelisâMenten constant of Rubisco for CO2 at 25Â°C {}
370	KmC25 = -9999., 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 650., 404.9, 650.
371
372	# KmO25 ([ubar]) : MichaelisâMenten constant of Rubisco for O2 at 25Â°C {}
373	KmO25 = -9999., 278400., 278400., 278400., 278400., 278400., 278400., 278400., 278400., 278400., 450000., 278400., 450000.
374
375	# Sco25 ([bar bar-1]) : Relative CO2 /O2 specificity factor for Rubisco at 25ÃÂ°C {}
376	Sco25 = -9999., 2800., 2800., 2800., 2800., 2800., 2800., 2800., 2800., 2800., 2590., 2800., 2590.
377
378	# gm25 ([mol m-2 s-1 bar-1] ) : Mesophyll diffusion conductance at 25ÃÂÃÂ°C { }
379	gm25 = -9999., 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, -9999., 0.4, -9999.
380
381	# gamma_star25 ([ubar]) : Ci-based CO2 compensation point in the absence of Rd at 25Â°C (ubar) {}
382	gamma_star25 = -9999., 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75
383
384	# a1 ([-]) : Empirical factor involved in the calculation of fvpd {}
385	a1 = -9999., 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.72, 0.85, 0.72
386
387	# b1 ([-]) : Empirical factor involved in the calculation of fvpd {}
388	b1 = -9999., 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.20, 0.14, 0.20
389
390	# g0 ([mol mâ2 sâ1 barâ1]) : Residual stomatal conductance when irradiance approaches zero {}
391	g0 = -9999., 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.01875, 0.00625, 0.01875
392
393	# h_protons ([mol mol-1]) : Number of protons required to produce one ATP {}
394	h_protons = -9999., 4., 4., 4., 4., 4., 4., 4., 4., 4., 4., 4., 4.
395
396	# fpsir ([-]) : Fraction of PSII eâ transport rate partitioned to the C4 cycle {}
397	fpsir = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.4, -9999., 0.4
398
399	# fQ ([-]) : Fraction of electrons at reduced plastoquinone that follow the Q-cycle {}
400	fQ = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 1., -9999., 1.
401
402	# fpseudo ([-]) : Fraction of electrons at PSI that follow pseudocyclic transport {}
403	fpseudo = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.1, -9999., 0.1
404
405	# kp ([mol mâ2 sâ1 barâ1]) : Initial carboxylation efficiency of the PEP carboxylase {}
406	kp = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.7, -9999., 0.7
407
408	# alpha ([-]) : Fraction of PSII activity in the bundle sheath {}
409	alpha = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.1, -9999., 0.1
410
411	# gbs ([mol mâ2 sâ1 barâ1]) : Bundle-sheath conductance {}
412	gbs = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.003, -9999., 0.003
413
414	# theta ([â]) : Convexity factor for response of J to irradiance {}
415	theta = -9999., 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7
416
417	# alpha_LL ([mol eâ (mol photon)â1]) : Conversion efficiency of absorbed light into J at strictly limiting light {}
418	alpha_LL = -9999., 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372
419
420	# STRESS_VCMAX ([-]) : Stress on vcmax {OK_SECHIBA or OK_STOMATE}
421	STRESS_VCMAX = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
422
423	# STRESS_GS ([-]) : Stress on gs {OK_SECHIBA or OK_STOMATE}
424	STRESS_GS = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
425
426	# STRESS_GM ([-]) : Stress on gm {OK_SECHIBA or OK_STOMATE}
427	STRESS_GM = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
428
429	# EXT_COEFF ([-]) : extinction coefficient of the Monsi&Seaki relationship (1953) {OK_SECHIBA or OK_STOMATE}
430	EXT_COEFF = .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5
431
432	# EXT_COEFF_VEGETFRAC ([-]) : extinction coefficient used for the calculation of the bare soil fraction {OK_SECHIBA or OK_STOMATE}
433	EXT_COEFF_VEGETFRAC = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
434
435	# HYDROL_HUMCSTE ([m]) : Root profile {OK_SECHIBA}
436	HYDROL_HUMCSTE = humcste_ref2m or humcste_ref4m depending on zmaxh
437
438	# PREF_SOIL_VEG ([-] ) : The soil tile number for each vegetation {OK_SECHIBA or OK_STOMATE}
439	PREF_SOIL_VEG = 1, 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3
440
441	# RSTRUCT_CONST ([s/m]) : Structural resistance {OK_SECHIBA}
442	RSTRUCT_CONST = 0.0, 25.0, 25.0, 25.0, 25.0, 25.0, 25.0, 25.0, 25.0, 2.5, 2.0, 2.0, 2.0
443
444	# KZERO ([kg/m^2/s]) : A vegetation dependent constant used in the calculation of the surface resistance. {OK_SECHIBA}
445	KZERO = 0.0, 12.E-5, 12.E-5, 12.e-5, 12.e-5, 25.e-5, 12.e-5,25.e-5, 25.e-5, 30.e-5, 30.e-5, 30.e-5, 30.e-5
446
447	# RVEG_PFT ([-]) : Artificial parameter to increase or decrease canopy resistance. {OK_SECHIBA}
448	RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
449
450	# WMAX_VEG ([kg/m^3]) : Maximum field capacity for each of the vegetations (Temporary): max quantity of water {OK_SECHIBA}
451	WMAX_VEG = 150., 150., 150., 150., 150., 150., 150.,150., 150., 150., 150., 150., 150.
452
453	# PERCENT_THROUGHFALL_PFT ([%]) : Percent by PFT of precip that is not intercepted by the canopy. Default value depend on run mode. {OK_SECHIBA}
454	PERCENT_THROUGHFALL_PFT = Case offline [0. 0. 0....] else [30. 30. 30.....]
455
456	# SNOWA_AGED_VIS ([-]) : Minimum snow albedo value for each vegetation type after aging (dirty old snow), visible albedo {OK_SECHIBA}
457	SNOWA_AGED_VIS = 0.74, 0.0, 0.0, 0.08, 0.24, 0.07, 0.18, 0.18, 0.33, 0.57, 0.57, 0.57, 0.57
458
459	# SNOWA_AGED_NIR ([-]) : Minimum snow albedo value for each vegetation type after aging (dirty old snow), near infrared albedo {OK_SECHIBA}
460	SNOWA_AGED_NIR = 0.50, 0.0, 0.0, 0.10, 0.37, 0.08, 0.16, 0.17, 0.27, 0.44, 0.44, 0.44, 0.44
461
462	# SNOWA_DEC_VIS ([-]) : Decay rate of snow albedo value for each vegetation type as it will be used in condveg_snow, visible albedo {OK_SECHIBA}
463	SNOWA_DEC_VIS = 0.21, 0.0, 0.0, 0.14, 0.08, 0.17, 0.05, 0.06, 0.09, 0.15, 0.15, 0.15, 0.15
464
465	# SNOWA_DEC_NIR ([-]) : Decay rate of snow albedo value for each vegetation type as it will be used in condveg_snow, near infrared albedo {OK_SECHIBA}
466	SNOWA_DEC_NIR = 0.13, 0.0, 0.0, 0.10, 0.10, 0.16, 0.04, 0.07, 0.08, 0.12, 0.12, 0.12, 0.12
467
468	# ALB_LEAF_VIS ([-]) : leaf albedo of vegetation type, visible albedo {OK_SECHIBA}
469	ALB_LEAF_VIS = 0.00, 0.04, 0.04, 0.04, 0.04, 0.03, 0.03, 0.03, 0.03, 0.06, 0.06, 0.06, 0.06
470
471	# ALB_LEAF_NIR ([-]) : leaf albedo of vegetation type, near infrared albedo {OK_SECHIBA}
472	ALB_LEAF_NIR = 0.00, 0.23, 0.18, 0.18, 0.20, 0.24, 0.15, 0.26, 0.20, 0.24, 0.27, 0.28, 0.26
473
474	# ISO_ACTIVITY ([-]) : Biogenic activity for each age class : isoprene {CHEMISTRY_BVOC}
475	ISO_ACTIVITY = 0.5, 1.5, 1.5, 0.5
476
477	# METHANOL_ACTIVITY ([-]) : Isoprene emission factor for each age class : methanol {CHEMISTRY_BVOC}
478	METHANOL_ACTIVITY = 1., 1., 0.5, 0.5
479
480	# EM_FACTOR_ISOPRENE ([ugC/g/h] ) : Isoprene emission factor {CHEMISTRY_BVOC}
481	EM_FACTOR_ISOPRENE = 0., 24., 24., 8., 16., 45., 8., 18., 0.5, 12., 18., 5., 5.
482
483	# EM_FACTOR_MONOTERPENE ([ugC/g/h] ) : Monoterpene emission factor {CHEMISTRY_BVOC }
484	EM_FACTOR_MONOTERPENE = 0., 2.0, 2.0, 1.8, 1.4, 1.6, 1.8, 1.4, 1.8, 0.8, 0.8, 0.22, 0.22
485
486	# C_LDF_MONO ([]) : Monoterpenes fraction dependancy to light {CHEMISTRY_BVOC}
487	C_LDF_MONO = 0.6
488
489	# C_LDF_SESQ ([]) : Sesquiterpenes fraction dependancy to light {CHEMISTRY_BVOC}
490	C_LDF_SESQ = 0.5
491
492	# C_LDF_METH ([]) : Methanol fraction dependancy to light {CHEMISTRY_BVOC}
493	C_LDF_METH = 0.8
494
495	# C_LDF_ACET ([]) : Acetone fraction dependancy to light {CHEMISTRY_BVOC}
496	C_LDF_ACET = 0.2
497
498	# EM_FACTOR_APINENE ([ugC/g/h] ) : Alfa pinene emission factor {CHEMISTRY_BVOC }
499	EM_FACTOR_APINENE = 0., 1.35, 1.35, 0.85, 0.95, 0.75, 0.85, 0.60, 1.98, 0.30, 0.30, 0.09, 0.09
500
501	# EM_FACTOR_BPINENE ([ugC/g/h] ) : Beta pinene emission factor {CHEMISTRY_BVOC }
502	EM_FACTOR_BPINENE = 0., 0.30, 0.30, 0.35, 0.25, 0.20, 0.35, 0.12, 0.45, 0.16, 0.12, 0.05, 0.05
503
504	# EM_FACTOR_LIMONENE ([ugC/g/h] ) : Limonene emission factor {CHEMISTRY_BVOC}
505	EM_FACTOR_LIMONENE = 0., 0.25, 0.25, 0.20, 0.25, 0.14, 0.20, 0.135, 0.11, 0.19, 0.42, 0.03, 0.03
506
507	# EM_FACTOR_MYRCENE ([ugC/g/h] ) : Myrcene emission factor {CHEMISTRY_BVOC}
508	EM_FACTOR_MYRCENE = 0., 0.20, 0.20, 0.12, 0.11, 0.065, 0.12, 0.036, 0.075, 0.08, 0.085, 0.015, 0.015
509
510	# EM_FACTOR_SABINENE ([ugC/g/h] ) : Sabinene emission factor {CHEMISTRY_BVOC}
511	EM_FACTOR_SABINENE = 0., 0.20, 0.20, 0.12, 0.17, 0.70, 0.12, 0.50, 0.09, 0.085, 0.075, 0.02, 0.02
512
513	# EM_FACTOR_CAMPHENE ([ugC/g/h] ) : Camphene emission factor {CHEMISTRY_BVOC}
514	EM_FACTOR_CAMPHENE = 0., 0.15, 0.15, 0.10, 0.10, 0.01, 0.10, 0.01, 0.07, 0.07, 0.08, 0.01, 0.01
515
516	# EM_FACTOR_3CARENE ([ugC/g/h] ) : 3-Carene emission factor {CHEMISTRY_BVOC}
517	EM_FACTOR_3CARENE = 0., 0.13, 0.13, 0.42, 0.02, 0.055, 0.42,0.025, 0.125, 0.085, 0.085, 0.065, 0.065
518
519	# EM_FACTOR_TBOCIMENE ([ugC/g/h] ) : T-beta-ocimene emission factor {CHEMISTRY_BVOC}
520	EM_FACTOR_TBOCIMENE = 0., 0.25, 0.25, 0.13, 0.09, 0.26, 0.13, 0.20, 0.085, 0.18, 0.18, 0.01, 0.01
521
522	# EM_FACTOR_OTHERMONOT ([ugC/g/h] ) : Other monoterpenes emission factor {CHEMISTRY_BVOC}
523	EM_FACTOR_OTHERMONOT = 0., 0.17, 0.17, 0.11, 0.11, 0.125, 0.11, 0.274, 0.01, 0.15, 0.155, 0.035, 0.035
524
525	# EM_FACTOR_SESQUITERP ([ugC/g/h] ) : Sesquiterpenes emission factor {CHEMISTRY_BVOC}
526	EM_FACTOR_SESQUITERP = 0., 0.45, 0.45, 0.13, 0.3, 0.36, 0.15, 0.3, 0.25, 0.6, 0.6, 0.08, 0.08
527
528	# C_BETA_MONO ([]) : Monoterpenes temperature dependency coefficient {CHEMISTRY_BVOC}
529	C_BETA_MONO = 0.1
530
531	# C_BETA_SESQ ([]) : Sesquiterpenes temperature dependency coefficient {CHEMISTRY_BVOC}
532	C_BETA_SESQ = 0.17
533
534	# C_BETA_METH ([]) : Methanol temperature dependency coefficient {CHEMISTRY_BVOC}
535	C_BETA_METH = 0.08
536
537	# C_BETA_ACET ([]) : Acetone temperature dependency coefficient {CHEMISTRY_BVOC}
538	C_BETA_ACET = 0.1
539
540	# C_BETA_OXYVOC ([]) : Other oxygenated BVOC temperature dependency coefficient {CHEMISTRY_BVOC}
541	C_BETA_OXYVOC = 0.13
542
543	# EM_FACTOR_ORVOC ([ugC/g/h] ) : ORVOC emissions factor {CHEMISTRY_BVOC }
544	EM_FACTOR_ORVOC = 0., 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5
545
546	# EM_FACTOR_OVOC ([ugC/g/h] ) : OVOC emissions factor {CHEMISTRY_BVOC}
547	EM_FACTOR_OVOC = 0., 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5
548
549	# EM_FACTOR_MBO ([ugC/g/h] ) : MBO emissions factor {CHEMISTRY_BVOC }
550	EM_FACTOR_MBO = 0., 2.e-5, 2.e-5, 1.4, 2.e-5, 2.e-5, 0.14, 2.e-5, 2.e-5, 2.e-5, 2.e-5, 2.e-5, 2.e-5
551
552	# EM_FACTOR_METHANOL ([ugC/g/h] ) : Methanol emissions factor {CHEMISTRY_BVOC }
553	EM_FACTOR_METHANOL = 0., 0.8, 0.8, 1.8, 0.9, 1.9, 1.8, 1.8, 1.8, 0.7, 0.9, 2., 2.
554
555	# EM_FACTOR_ACETONE ([ugC/g/h] ) : Acetone emissions factor {CHEMISTRY_BVOC }
556	EM_FACTOR_ACETONE = 0., 0.25, 0.25, 0.3, 0.2, 0.33, 0.3, 0.25, 0.25, 0.2, 0.2, 0.08, 0.08
557
558	# EM_FACTOR_ACETAL ([ugC/g/h] ) : Acetaldehyde emissions factor {CHEMISTRY_BVOC}
559	EM_FACTOR_ACETAL = 0., 0.2, 0.2, 0.2, 0.2, 0.25, 0.25, 0.16, 0.16, 0.12, 0.12, 0.035, 0.02
560
561	# EM_FACTOR_FORMAL ([ugC/g/h] ) : Formaldehyde emissions factor {CHEMISTRY_BVOC }
562	EM_FACTOR_FORMAL = 0., 0.04, 0.04, 0.08, 0.04, 0.04, 0.04, 0.04, 0.04, 0.025, 0.025, 0.013, 0.013
563
564	# EM_FACTOR_ACETIC ([ugC/g/h] ) : Acetic Acid emissions factor {CHEMISTRY_BVOC }
565	EM_FACTOR_ACETIC = 0., 0.025, 0.025,0.025,0.022,0.08,0.025,0.022,0.013,0.012,0.012,0.008,0.008
566
567	# EM_FACTOR_FORMIC ([ugC/g/h] ) : Formic Acid emissions factor {CHEMISTRY_BVOC}
568	EM_FACTOR_FORMIC = 0., 0.015, 0.015, 0.02, 0.02, 0.025, 0.025, 0.015, 0.015,0.010,0.010,0.008,0.008
569
570	# EM_FACTOR_NO_WET ([ngN/m^2/s]) : NOx emissions factor wet soil emissions and exponential dependancy factor {CHEMISTRY_BVOC}
571	EM_FACTOR_NO_WET = 0., 2.6, 0.06, 0.03, 0.03, 0.03, 0.03, 0.03, 0.03, 0.36, 0.36, 0.36, 0.36
572
573	# EM_FACTOR_NO_DRY ([ngN/m^2/s] ) : NOx emissions factor dry soil emissions and exponential dependancy factor {CHEMISTRY_BVOC}
574	EM_FACTOR_NO_DRY = 0., 8.60, 0.40, 0.22, 0.22, 0.22, 0.22, 0.22, 0.22, 2.65, 2.65, 2.65, 2.65
575
576	# LARCH ([-] ) : Larcher 1991 SAI/LAI ratio {CHEMISTRY_BVOC }
577	LARCH = 0., 0.015, 0.015, 0.003, 0.005, 0.005, 0.003, 0.005, 0.003, 0.005, 0.005, 0.008, 0.008
578
579	# SLA ([m^2/gC]) : specif leaf area {OK_STOMATE}
580	SLA = 1.5E-2, 1.53E-2, 2.6E-2, 9.26E-3, 2E-2, 2.6E-2, 9.26E-3, 2.6E-2, 1.9E-2, 2.6E-2, 2.6E-2, 2.6E-2, 2.6E-2
581
582	# AVAILABILITY_FACT ([-] ) : Calculate dynamic mortality in lpj_gap, pft dependent parameter {OK_STOMATE }
583	AVAILABILITY_FACT = -9999., 0.14, 0.14, 0.10, 0.10, 0.10, 0.05, 0.05, 0.05, -9999., -9999., -9999., -9999.
584
585	# R0 ([-] ) : Standard root allocation {OK_STOMATE }
586	R0 = -9999., .30, .30, .30, .30, .30, .30, .30, .30, .30, .30, .30, .30
587
588	# S0 ([-] ) : Standard sapwood allocation {OK_STOMATE }
589	S0 = -9999., .25, .25, .30, .30, .30, .30, .30, .30, .30, .30, .30, .30
590
591	# FRAC_GROWTHRESP ([-]) : fraction of GPP which is lost as growth respiration {OK_STOMATE}
592	FRAC_GROWTHRESP = -9999., 0.35, 0.35, 0.28, 0.28, 0.28, 0.35, 0.35, 0.35, 0.28, 0.28, 0.28, 0.28
593
594	# MAINT_RESP_SLOPE_C ([-]) : slope of maintenance respiration coefficient (1/K), constant c of aT^2+bT+c , tabulated {OK_STOMATE}
595	MAINT_RESP_SLOPE_C = -9999., 0.12, 0.12, 0.16, 0.16, 0.16, 0.25, 0.25, 0.25, 0.16, 0.12, 0.16, 0.12
596
597	# MAINT_RESP_SLOPE_B ([-]) : slope of maintenance respiration coefficient (1/K), constant b of aT^2+bT+c , tabulated {OK_STOMATE}
598	MAINT_RESP_SLOPE_B = -9999., .0, .0, .0, .0, .0, .0, .0, .0, -.00133, .0, -.00133, .0
599
600	# MAINT_RESP_SLOPE_A ([-]) : slope of maintenance respiration coefficient (1/K), constant a of aT^2+bT+c , tabulated {OK_STOMATE}
601	MAINT_RESP_SLOPE_A = -9999., .0, .0, .0, .0, .0, .0, .0, .0, .0, .0, .0, .0
602
603	# CM_ZERO_LEAF ([g/g/day]) : maintenance respiration coefficient at 0 deg C, for leaves, tabulated {OK_STOMATE}
604	CM_ZERO_LEAF = -9999., 2.35E-3, 2.62E-3, 1.01E-3, 2.35E-3, 2.62E-3, 1.01E-3,2.62E-3, 2.05E-3, 2.62E-3, 2.62E-3, 2.62E-3, 2.62E-3
605
606	# CM_ZERO_SAPABOVE ([g/g/day]) : maintenance respiration coefficient at 0 deg C,for sapwood above, tabulated {OK_STOMATE}
607	CM_ZERO_SAPABOVE = -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4
608
609	# CM_ZERO_SAPBELOW ([g/g/day]) : maintenance respiration coefficient at 0 deg C, for sapwood below, tabulated {OK_STOMATE}
610	CM_ZERO_SAPBELOW = -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4
611
612	# CM_ZERO_HEARTABOVE ([g/g/day]) : maintenance respiration coefficient at 0 deg C, for heartwood above, tabulated {OK_STOMATE }
613	CM_ZERO_HEARTABOVE = -9999., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.
614
615	# CM_ZERO_HEARTBELOW ([g/g/day] ) : maintenance respiration coefficient at 0 deg C,for heartwood below, tabulated {OK_STOMATE }
616	CM_ZERO_HEARTBELOW = -9999., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.
617
618	# CM_ZERO_ROOT ([g/g/day] ) : maintenance respiration coefficient at 0 deg C, for roots, tabulated {OK_STOMATE}
619	CM_ZERO_ROOT = -9999.,1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3,1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3
620
621	# CM_ZERO_FRUIT ([g/g/day] ) : maintenance respiration coefficient at 0 deg C, for fruits, tabulated {OK_STOMATE}
622	CM_ZERO_FRUIT = -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4,1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4
623
624	# CM_ZERO_CARBRES ([g/g/day] ) : maintenance respiration coefficient at 0 deg C, for carbohydrate reserve, tabulated {OK_STOMATE}
625	CM_ZERO_CARBRES = -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4,1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4
626
627	# FLAM ([-]) : flamability: critical fraction of water holding capacity {OK_STOMATE}
628	FLAM = -9999., .15, .25, .25, .25, .25, .25, .25, .25, .25, .25, .35, .35
629
630	# RESIST ([-]) : fire resistance {OK_STOMATE}
631	RESIST = -9999., .95, .90, .12, .50, .12, .12, .12, .12, .0, .0, .0, .0
632
633	# COEFF_LCCHANGE_1 ([-]) : Coeff of biomass export for the year {OK_STOMATE}
634	COEFF_LCCHANGE_1 = -9999., 0.897, 0.897, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597
635
636	# COEFF_LCCHANGE_10 ([-]) : Coeff of biomass export for the decade {OK_STOMATE}
637	COEFF_LCCHANGE_10 = -9999., 0.103, 0.103, 0.299, 0.299, 0.299, 0.299, 0.299, 0.299, 0.299, 0.403, 0.299, 0.403
638
639	# COEFF_LCCHANGE_100 ([-]) : Coeff of biomass export for the century {OK_STOMATE}
640	COEFF_LCCHANGE_100 = -9999., 0., 0., 0.104, 0.104, 0.104, 0.104, 0.104, 0.104, 0.104, 0., 0.104, 0.
641
642	# LAI_MAX_TO_HAPPY ([-]) : threshold of LAI below which plant uses carbohydrate reserves {OK_STOMATE}
643	LAI_MAX_TO_HAPPY = -9999., .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5
644
645	# LAI_MAX ([m^2/m^2]) : maximum LAI, PFT-specific {OK_STOMATE}
646	LAI_MAX = -9999., 7.0, 5.0, 5.0, 4.0, 5.0, 3.5, 4.0, 3.0, 2.5, 2.0, 5.0, 5.0
647
648	# PHENO_TYPE ([-]) : type of phenology, 0 {OK_STOMATE}
649	PHENO_TYPE = 0, 1, 3, 1, 1, 2, 1, 2, 2, 4, 4, 2, 3
650
651	# PHENO_GDD_CRIT_C ([-]) : critical gdd, tabulated (C), constant c of aT^2+bT+c {OK_STOMATE}
652	PHENO_GDD_CRIT_C = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 270., 400., 125., 400.
653
654	# PHENO_GDD_CRIT_B ([-]) : critical gdd, tabulated (C), constant b of aT^2+bT+c {OK_STOMATE}
655	PHENO_GDD_CRIT_B = -9999., -9999., -9999., -9999., -9999., -9999., -9999.,-9999., -9999., 6.25, 0., 0., 0.
656
657	# PHENO_GDD_CRIT_A ([-]) : critical gdd, tabulated (C), constant a of aT^2+bT+c {OK_STOMATE}
658	PHENO_GDD_CRIT_A = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.03125, 0., 0., 0.
659
660	# PHENO_MOIGDD_T_CRIT ([C]) : Average temperature threashold for C4 grass used in pheno_moigdd {OK_STOMATE}
661	PHENO_MOIGDD_T_CRIT = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 22.0, -9999., -9999.
662
663	# NGD_CRIT ([days]) : critical ngd, tabulated. Threshold -5 degrees {OK_STOMATE}
664	NGD_CRIT = -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0., -9999., -9999., -9999., -9999., -9999.
665
666	# NCDGDD_TEMP ([C] ) : critical temperature for the ncd vs. gdd function in phenology {OK_STOMATE}
667	NCDGDD_TEMP = -9999., -9999., -9999., -9999., -9999., 5., -9999., 0., -9999., -9999., -9999., -9999., -9999.
668
669	# HUM_FRAC ([%]) : critical humidity (relative to min/max) for phenology {OK_STOMATE}
670	HUM_FRAC = -9999., -9999., .5, -9999., -9999., -9999., -9999., -9999., -9999., .5, .5, .5,.5
671
672	# HUM_MIN_TIME ([days]) : minimum time elapsed since moisture minimum {OK_STOMATE}
673	HUM_MIN_TIME = -9999., -9999., 50., -9999., -9999., -9999., -9999., -9999., -9999., 35., 35., 75., 75.
674
675	# TAU_SAP ([days]) : sapwood -> heartwood conversion time {OK_STOMATE}
676	TAU_SAP = -9999., 730., 730., 730., 730., 730., 730., 730., 730., -9999., -9999., -9999., -9999.
677
678	# TAU_LEAFINIT ([days]) : time to attain the initial foliage using the carbohydrate reserve {OK_STOMATE}
679	TAU_LEAFINIT = -9999., 10., 10., 10., 10., 10., 10., 10., 10., 10., 10., 10., 10.
680
681	# TAU_FRUIT ([days]) : fruit lifetime {OK_STOMATE}
682	TAU_FRUIT = -9999., 90., 90., 90., 90., 90., 90., 90., 90., -9999., -9999., -9999., -9999.
683
684	# ECUREUIL ([-]) : fraction of primary leaf and root allocation put into reserve {OK_STOMATE}
685	ECUREUIL = -9999., .0, 1., .0, .0, 1., .0, 1., 1., 1., 1., 1., 1.
686
687	# ALLOC_MIN ([-]) : minimum allocation above/below {OK_STOMATE}
688	ALLOC_MIN = -9999., 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, -9999., -9999., -9999., -9999.
689
690	# ALLOC_MAX ([-]) : maximum allocation above/below {OK_STOMATE}
691	ALLOC_MAX = -9999., 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, -9999., -9999., -9999., -9999.
692
693	# DEMI_ALLOC ([-]) : mean allocation above/below {OK_STOMATE}
694	DEMI_ALLOC = -9999., 5., 5., 5., 5., 5., 5., 5., 5., -9999., -9999., -9999., -9999.
695
696	# LEAFLIFE_TAB ([years]) : leaf longevity {OK_STOMATE}
697	LEAFLIFE_TAB = -9999., .5, 2., .33, 1., 2., .33, 2., 2., 2., 2., 2., 2.
698
699	# LEAFFALL ([days]) : length of death of leaves, tabulated {OK_STOMATE}
700	LEAFFALL = -9999., -9999., 10., -9999., -9999., 10., -9999., 10., 10., 10., 10., 10., 10.
701
702	# LEAFAGECRIT ([days]) : critical leaf age, tabulated {OK_STOMATE}
703	LEAFAGECRIT = -9999., 730., 180., 910., 730., 180., 910., 180., 180., 120., 120., 90., 90.
704
705	# SENESCENCE_TYPE ([-]) : type of senescence, tabulated {OK_STOMATE}
706	SENESCENCE_TYPE = none, none, dry, none, none, cold, none, cold, cold, mixed, mixed, mixed, mixed
707
708	# SENESCENCE_HUM ([-] ) : critical relative moisture availability for senescence {OK_STOMATE}
709	SENESCENCE_HUM = -9999., -9999., .3, -9999., -9999., -9999., -9999., -9999., -9999., .2, .2, .3, .2
710
711	# NOSENESCENCE_HUM ([-]) : relative moisture availability above which there is no humidity-related senescence {OK_STOMATE}
712	NOSENESCENCE_HUM = -9999., -9999., .8, -9999., -9999., -9999., -9999., -9999., -9999., .3, .3, .3, .3
713
714	# MAX_TURNOVER_TIME ([days]) : maximum turnover time for grasse {OK_STOMATE}
715	MAX_TURNOVER_TIME = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 80., 80., 80., 80.
716
717	# MIN_TURNOVER_TIME ([days]) : minimum turnover time for grasse {OK_STOMATE}
718	MIN_TURNOVER_TIME = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 10., 10., 10., 10.
719
720	# MIN_LEAF_AGE_FOR_SENESCENCE ([days] ) : minimum leaf age to allow senescence g {OK_STOMATE}
721	MIN_LEAF_AGE_FOR_SENESCENCE = -9999., -9999., 90., -9999., -9999., 90., -9999., 60., 60., 30., 30., 30., 30.
722
723	# SENESCENCE_TEMP_C ([-]) : critical temperature for senescence (C), constant c of aT^2+bT+c, tabulated {OK_STOMATE}
724	SENESCENCE_TEMP_C = -9999., -9999., -9999., -9999., -9999., 12., -9999., 7., 2., -1.375, 5., 5., 10.
725
726	# SENESCENCE_TEMP_B ([-]) : critical temperature for senescence (C), constant b of aT^2+bT+c ,tabulated {OK_STOMATE }
727	SENESCENCE_TEMP_B = -9999., -9999., -9999., -9999., -9999., 0., -9999., 0., 0., .1, 0., 0., 0.
728
729	# SENESCENCE_TEMP_A ([-] ) : critical temperature for senescence (C), constant a of aT^2+bT+c , tabulated {OK_STOMATE}
730	SENESCENCE_TEMP_A = -9999., -9999., -9999., -9999., -9999., 0., -9999., 0., 0.,.00375, 0., 0., 0.
731
732	# GDD_SENESCENCE ([days] ) : minimum gdd to allow senescence of crops {OK_STOMATE}
733	GDD_SENESCENCE = -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 950., 4000.
734
735	# ALWAYS_INIT ([BOOLEAN]) : Take carbon from atmosphere if carbohydrate reserve too small {OK_STOMATE}
736	ALWAYS_INIT = y, y, y, y, y, y, y, y, y, y, n, y, y
737
738	# RESIDENCE_TIME ([years]) : residence time of trees {OK_DGVM and NOT(LPJ_GAP_CONST_MORT)}
739	RESIDENCE_TIME = -9999., 30.0, 30.0, 40.0, 40.0, 40.0, 80.0, 80.0, 80.0, 0.0, 0.0, 0.0, 0.0
740
741	# TMIN_CRIT ([C]) : critical tmin, tabulated {OK_STOMATE}
742	TMIN_CRIT = -9999., 0.0, 0.0, -30.0, -14.0, -30.0, -45.0, -45.0, -9999., -9999., -9999., -9999., -9999.
743
744	# TCM_CRIT ([C]) : critical tcm, tabulated {OK_STOMATE}
745	TCM_CRIT = -9999., -9999., -9999., 5.0, 15.5, 15.5, -8.0, -8.0, -8.0, -9999., -9999., -9999., -9999.
746
747	# HERBIVORES ([FLAG]) : herbivores allowed? {OK_STOMATE }
748	HERBIVORES = n
749
750	# TREAT_EXPANSION ([FLAG]) : treat expansion of PFTs across a grid cell? {OK_STOMATE }
751	TREAT_EXPANSION = n
752
753	# LPJ_GAP_CONST_MORT ([FLAG]) : Constant mortality {OK_STOMATE AND NOT OK_DGVM}
754	LPJ_GAP_CONST_MORT = y/n depending on OK_DGVM
755
756	# HARVEST_AGRI ([FLAG]) : Harvest model for agricultural PFTs. {OK_STOMATE }
757	HARVEST_AGRI = y
758
759	# FIRE_DISABLE ([FLAG]) : no fire allowed {OK_STOMATE }
760	FIRE_DISABLE = y
761
762	# SPINUP_ANALYTIC (BOOLEAN ) : Activation of the analytic resolution of the spinup. {OK_STOMATE}
763	SPINUP_ANALYTIC = n
764
765	# AGRICULTURE ([FLAG]) : agriculture allowed? {OK_SECHIBA or OK_STOMATE}
766	AGRICULTURE = y
767
768	# IMPOSE_VEG ([FLAG]) : Should the vegetation be prescribed ? {OK_SECHIBA or OK_STOMATE}
769	IMPOSE_VEG = n
770
771	# IMPOSE_SOILT ([FLAG]) : Should the soil type be prescribed ? {}
772	IMPOSE_SOILT = n
773
774	# LAI_MAP ([FLAG]) : Read the LAI map {OK_SECHIBA or OK_STOMATE}
775	LAI_MAP = n
776
777	# VEGET_REINIT ([FLAG] ) : Reset veget_year counter (obsolet) {VEGET_UPDATE > 0Y}
778	VEGET_REINIT = y
779
780	# VEGETMAP_RESET ([FLAG] ) : Flag to change vegetation map without activating LAND USE change for carbon fluxes and reset carbon related variables to zero {}
781	VEGETMAP_RESET = n
782
783	# VEGET_YEAR ([FLAG] ) : Year of the vegetation map to be read {}
784	VEGET_YEAR = 1
785
786	# MAXMASS_SNOW ([kg/m^2] ) : The maximum mass of a snow {OK_SECHIBA}
787	MAXMASS_SNOW = 3000.
788
789	# SNOWCRI ([kg/m^2] ) : Sets the amount above which only sublimation occures {OK_SECHIBA}
790	SNOWCRI = 1.5
791
792	# MIN_WIND ([m/s]) : Minimum wind speed {OK_SECHIBA}
793	MIN_WIND = 0.1
794
795	# MAX_SNOW_AGE ([days?]) : Maximum period of snow aging {OK_SECHIBA}
796	MAX_SNOW_AGE = 50.
797
798	# SNOW_TRANS ([m] ) : Transformation time constant for snow {OK_SECHIBA}
799	SNOW_TRANS = 0.2
800
801	# OK_NUDGE_MC ([FLAG]) : Activate nudging of soil moisture {}
802	OK_NUDGE_MC = n
803
804	# NUDGE_TAU_MC ([-]) : Relaxation time for nudging of soil moisture expressed in fraction of the day {OK_NUDGE_MC}
805	NUDGE_TAU_MC = 1
806
807	# OK_NUDGE_SNOW ([FLAG]) : Activate nudging of snow variables {}
808	OK_NUDGE_SNOW = n
809
810	# NUDGE_TAU_SNOW ([-]) : Relaxation time for nudging of snow variables {OK_NUDGE_SNOW}
811	NUDGE_TAU_SNOW = 1
812
813	# NUDGE_INTERPOL_WITH_XIOS ([FLAG]) : Activate reading and interpolation with XIOS for nudging fields {OK_NUDGE_MC or OK_NUDGE_SNOW}
814	NUDGE_INTERPOL_WITH_XIOS = n
815
816	# HEIGHT_DISPLACEMENT ([m] ) : Magic number which relates the height to the displacement height. {OK_SECHIBA }
817	HEIGHT_DISPLACEMENT = 0.75
818
819	# Z0_BARE ([m] ) : bare soil roughness length {OK_SECHIBA }
820	Z0_BARE = 0.01
821
822	# Z0_ICE ([m] ) : ice roughness length {OK_SECHIBA }
823	Z0_ICE = 0.001
824
825	# TCST_SNOWA ([days]) : Time constant of the albedo decay of snow {OK_SECHIBA }
826	TCST_SNOWA = 10.0
827
828	# SNOWCRI_ALB ([cm] ) : Critical value for computation of snow albedo {OK_SECHIBA}
829	SNOWCRI_ALB = 10.
830
831	# VIS_DRY ([-] ) : The correspondance table for the soil color numbers and their albedo {OK_SECHIBA }
832	VIS_DRY = 0.24, 0.22, 0.20, 0.18, 0.16, 0.14, 0.12, 0.10, 0.27
833
834	# NIR_DRY ([-] ) : The correspondance table for the soil color numbers and their albedo {OK_SECHIBA }
835	NIR_DRY = 0.48, 0.44, 0.40, 0.36, 0.32, 0.28, 0.24, 0.20, 0.55
836
837	# VIS_WET ([-] ) : The correspondance table for the soil color numbers and their albedo {OK_SECHIBA }
838	VIS_WET = 0.12, 0.11, 0.10, 0.09, 0.08, 0.07, 0.06, 0.05, 0.15
839
840	# NIR_WET ([-] ) : The correspondance table for the soil color numbers and their albedo {OK_SECHIBA }
841	NIR_WET = 0.24, 0.22, 0.20, 0.18, 0.16, 0.14, 0.12, 0.10, 0.31
842
843	# ALBSOIL_VIS ([-] ) : {OK_SECHIBA }
844	ALBSOIL_VIS = 0.18, 0.16, 0.16, 0.15, 0.12, 0.105, 0.09, 0.075, 0.25
845
846	# ALBSOIL_NIR ([-] ) : {OK_SECHIBA }
847	ALBSOIL_NIR = 0.36, 0.34, 0.34, 0.33, 0.30, 0.25, 0.20, 0.15, 0.45
848
849	# ALB_DEADLEAF ([-] ) : albedo of dead leaves, VIS+NIR {OK_SECHIBA }
850	ALB_DEADLEAF = 0.12, 0.35
851
852	# ALB_ICE ([-] ) : albedo of ice, VIS+NIR {OK_SECHIBA}
853	ALB_ICE = 0.60, 0.20
854
855	# CONDVEG_SNOWA ([-]) : The snow albedo used by SECHIBA {OK_SECHIBA}
856	CONDVEG_SNOWA = 1.E+20
857
858	# ALB_BARE_MODEL ([FLAG]) : Switch bare soil albedo dependent (if TRUE) on soil wetness {OK_SECHIBA}
859	ALB_BARE_MODEL = n
860
861	# ALB_BG_MODIS ([FLAG]) : Read bare soil albedo from file with background MODIS data {OK_SECHIBA}
862	ALB_BG_MODIS = y
863
864	# IMPOSE_AZE ([FLAG]) : Should the surface parameters be prescribed {OK_SECHIBA}
865	IMPOSE_AZE = n
866
867	# CONDVEG_Z0 ([m]) : Surface roughness {IMPOSE_AZE}
868	CONDVEG_Z0 = 0.15
869
870	# ROUGHHEIGHT ([m] ) : Height to be added to the height of the first level {IMPOSE_AZE}
871	ROUGHHEIGHT = 0.0
872
873	# CONDVEG_ALBVIS ([-]) : SW visible albedo for the surface {IMPOSE_AZE}
874	CONDVEG_ALBVIS = 0.25
875
876	# CONDVEG_ALBNIR ([-] ) : SW near infrared albedo for the surface {IMPOSE_AZE}
877	CONDVEG_ALBNIR = 0.25
878
879	# CONDVEG_EMIS ([-] ) : Emissivity of the surface for LW radiation {IMPOSE_AZE}
880	CONDVEG_EMIS = 1.0
881
882	# ROUGH_DYN ([FLAG]) : Account for a dynamic roughness height {OK_SECHIBA}
883	ROUGH_DYN = y
884
885	# C1 ([-] ) : Constant used in the formulation of the ratio of {ROUGH_DYN}
886	C1 = 0.32
887
888	# C2 ([-] ) : Constant used in the formulation of the ratio of {ROUGH_DYN}
889	C2 = 0.264
890
891	# C3 ([-] ) : Constant used in the formulation of the ratio of {ROUGH_DYN}
892	C3 = 15.1
893
894	# Cdrag_foliage ([-] ) : Drag coefficient of the foliage {ROUGH_DYN}
895	Cdrag_foliage = 0.2
896
897	# Ct ([-] ) : Heat transfer coefficient of the leaf {ROUGH_DYN}
898	Ct = 0.01
899
900	# Prandtl ([-] ) : Prandtl number used in the calculation of Ct* {ROUGH_DYN}
901	Prandtl = 0.71
902
903	# xansmax ([-] ) : maximum snow albedo {OK_SECHIBA}
904	xansmax = 0.85
905
906	# xansmin ([-] ) : minimum snow albedo {OK_SECHIBA}
907	xansmin = 0.50
908
909	# xans_todry ([S-1] ) : albedo decay rate for the dry snow {OK_SECHIBA}
910	xans_todry = 0.008
911
912	# xans_t ([S-1] ) : albedo decay rate for the wet snow {OK_SECHIBA}
913	xans_t = 0.24
914
915	# xrhosmax ([-] ) : maximum snow density {OK_SECHIBA}
916	xrhosmax = 750
917
918	# xwsnowholdmax1 ([-] ) : snow holding capacity 1 {OK_SECHIBA}
919	xwsnowholdmax1 = 0.03
920
921	# xwsnowholdmax2 ([-] ) : snow holding capacity 2 {OK_SECHIBA}
922	xwsnowholdmax2 = 0.10
923
924	# xsnowrhohold ([kg/m3] ) : snow density {OK_SECHIBA}
925	xsnowrhohold = 200.0
926
927	# ZSNOWTHRMCOND1 ([W/m/K] ) : Thermal conductivity Coef 1 {OK_SECHIBA}
928	ZSNOWTHRMCOND1 = 0.02
929
930	# ZSNOWTHRMCOND2 ([W m5/(kg2 K)] ) : Thermal conductivity Coef 2 {OK_SECHIBA}
931	ZSNOWTHRMCOND2 = 2.5E-6
932
933	# ZSNOWTHRMCOND_AVAP ([W/m/K] ) : Thermal conductivity Coef 1 water vapor {OK_SECHIBA}
934	ZSNOWTHRMCOND_AVAP = -0.06023
935
936	# ZSNOWTHRMCOND_BVAP ([W/m] ) : Thermal conductivity Coef 2 water vapor {OK_SECHIBA}
937	ZSNOWTHRMCOND_BVAP = -2.5425
938
939	# ZSNOWTHRMCOND_CVAP ([K] ) : Thermal conductivity Coef 3 water vapor {OK_SECHIBA}
940	ZSNOWTHRMCOND_CVAP = -289.99
941
942	# ZSNOWCMPCT_RHOD ([kg/m3]) : Snow compaction coefficent {OK_SECHIBA}
943	ZSNOWCMPCT_RHOD = 150.0
944
945	# ZSNOWCMPCT_ACM ([1/s]) : Coefficent for the thermal conductivity {OK_SECHIBA}
946	ZSNOWCMPCT_ACM = 2.8e-6
947
948	# ZSNOWCMPCT_BCM ([1/K]) : Coefficent for the thermal conductivity {OK_SECHIBA}
949	ZSNOWCMPCT_BCM = 0.04
950
951	# ZSNOWCMPCT_CCM ([m3/kg] ) : Coefficent for the thermal conductivity {OK_SECHIBA}
952	ZSNOWCMPCT_CCM = 460.
953
954	# ZSNOWCMPCT_V0 ([Pa/s]) : Vapor coefficent for the thermal conductivity {OK_SECHIBA}
955	ZSNOWCMPCT_V0 = 3.7e7
956
957	# ZSNOWCMPCT_VT ([1/K]) : Vapor coefficent for the thermal conductivity {OK_SECHIBA}
958	ZSNOWCMPCT_VT = 0.081
959
960	# ZSNOWCMPCT_VR ([m3/kg]) : Vapor coefficent for the thermal conductivity {OK_SECHIBA}
961	ZSNOWCMPCT_VR = 0.018
962
963	# CB ([-] ) : Constant of the Louis scheme {OK_SECHIBA}
964	CB = 5.0
965
966	# CC ([-] ) : Constant of the Louis scheme {OK_SECHIBA}
967	CC = 5.0
968
969	# CD ([-] ) : Constant of the Louis scheme {OK_SECHIBA}
970	CD = 5.0
971
972	# RAYT_CSTE ([W.m^{-2}] ) : Constant in the computation of surface resistance {OK_SECHIBA}
973	RAYT_CSTE = 125
974
975	# DEFC_PLUS ([K.W^{-1}] ) : Constant in the computation of surface resistance {OK_SECHIBA}
976	DEFC_PLUS = 23.E-3
977
978	# DEFC_MULT ([K.W^{-1}] ) : Constant in the computation of surface resistance {OK_SECHIBA}
979	DEFC_MULT = 1.5
980
981	# NLAI ([-] ) : Number of LAI levels {OK_SECHIBA}
982	NLAI = 20
983
984	# LAIMAX ([m^2/m^2] ) : Maximum LAI {OK_SECHIBA}
985	LAIMAX =
986
987	# DEW_VEG_POLY_COEFF ([-] ) : coefficients of the polynome of degree 5 for the dew {OK_SECHIBA}
988	DEW_VEG_POLY_COEFF = 0.887773, 0.205673, 0.110112, 0.014843, 0.000824, 0.000017
989
990	# DOWNREGULATION_CO2 ([FLAG] ) : Activation of CO2 downregulation (used for CMIP6 version 6.1.0-6.1.10) {OK_SECHIBA}
991	DOWNREGULATION_CO2 = y
992
993	# DOWNREGULATION_CO2_NEW ([FLAG] ) : Activation of CO2 downregulation (used for CMIP6 version 6.1.11 and later) {OK_SECHIBA}
994	DOWNREGULATION_CO2_NEW = n
995
996	# DOWNREGULATION_CO2_BASELEVEL ([ppm] ) : CO2 base level {DOWNREGULATION_CO2 or DOWNREGULATION_CO2_NEW}
997	DOWNREGULATION_CO2_BASELEVEL = 380.
998
999	# DOWNREGULATION_CO2_MINIMUM ([ppm] ) : CO2 value above which downregulation is taken into account {DOWNREGULATION_CO2_NEW}
1000	DOWNREGULATION_CO2_MINIMUM = 280.
1001
1002	# GB_REF ([s m-1] ) : Leaf bulk boundary layer resistance {}
1003	GB_REF = 1./25.
1004
1005	# MIN_VEGFRAC ([-] ) : Minimal fraction of mesh a vegetation type can occupy {OK_SECHIBA }
1006	MIN_VEGFRAC = 0.001
1007
1008	# STEMPDIAG_BID ([K]) : only needed for an initial LAI if there is no restart file {OK_SECHIBA }
1009	STEMPDIAG_BID = 280.
1010
1011	# LAI_LEVEL_DEPTH ([-] ) : {}
1012	LAI_LEVEL_DEPTH = 0.15
1013
1014	# Oi ([ubar] ) : Intercellular oxygen partial pressure {}
1015	Oi = 210000.
1016
1017	# TOO_LONG ([days] ) : longest sustainable time without regeneration (vernalization) {OK_STOMATE}
1018	TOO_LONG = 5.
1019
1020	# TAU_FIRE ([days] ) : Time scale for memory of the fire index (days). Validated for one year in the DGVM. {OK_STOMATE }
1021	TAU_FIRE = 30.
1022
1023	# LITTER_CRIT ([gC/m^2] ) : Critical litter quantity for fire {OK_STOMATE }
1024	LITTER_CRIT = 200.
1025
1026	# FIRE_RESIST_STRUCT ([-] ) : {OK_STOMATE }
1027	FIRE_RESIST_STRUCT = 0.5
1028
1029	# CO2FRAC ([-] ) : What fraction of a burned plant compartment goes into the atmosphere {OK_STOMATE }
1030	CO2FRAC = 0.95, 0.95, 0., 0.3, 0., 0., 0.95, 0.95
1031
1032	# BCFRAC_COEFF ([-] ) : {OK_STOMATE }
1033	BCFRAC_COEFF = 0.3, 1.3, 88.2
1034
1035	# FIREFRAC_COEFF ([-] ) : {OK_STOMATE }
1036	FIREFRAC_COEFF = 0.45, 0.8, 0.6, 0.13
1037
1038	# REF_GREFF ([1/year] ) : Asymptotic maximum mortality rate {OK_STOMATE }
1039	REF_GREFF = 0.035
1040
1041	# OK_MINRES ([FLAG]) : Do we try to reach a minimum reservoir even if we are severely stressed? {OK_STOMATE }
1042	OK_MINRES = y
1043
1044	# RESERVE_TIME_TREE ([days] ) : maximum time during which reserve is used (trees) {OK_STOMATE }
1045	RESERVE_TIME_TREE = 30.
1046
1047	# RESERVE_TIME_GRASS ([days] ) : maximum time during which reserve is used (grasses) {OK_STOMATE }
1048	RESERVE_TIME_GRASS = 20.
1049
1050	# F_FRUIT ([-] ) : Standard fruit allocation {OK_STOMATE }
1051	F_FRUIT = 0.1
1052
1053	# ALLOC_SAP_ABOVE_GRASS ([-] ) : fraction of sapwood allocation above ground {OK_STOMATE }
1054	ALLOC_SAP_ABOVE_GRASS = 1.0
1055
1056	# MIN_LTOLSR ([-] ) : extrema of leaf allocation fraction {OK_STOMATE }
1057	MIN_LTOLSR = 0.2
1058
1059	# MAX_LTOLSR ([-] ) : extrema of leaf allocation fraction {OK_STOMATE }
1060	MAX_LTOLSR = 0.5
1061
1062	# Z_NITROGEN ([m] ) : scaling depth for nitrogen limitation {OK_STOMATE}
1063	Z_NITROGEN = 0.2
1064
1065	# NLIM_TREF ([C] ) : {OK_STOMATE }
1066	NLIM_TREF = 25.
1067
1068	# PIPE_TUNE1 ([-] ) : crown area {OK_STOMATE }
1069	PIPE_TUNE1 = 100.0
1070
1071	# PIPE_TUNE2 ([-] ) : height {OK_STOMATE }
1072	PIPE_TUNE2 = 40.0
1073
1074	# PIPE_TUNE3 ([-] ) : height {OK_STOMATE }
1075	PIPE_TUNE3 = 0.5
1076
1077	# PIPE_TUNE4 ([-] ) : needed for stem diameter {OK_STOMATE }
1078	PIPE_TUNE4 = 0.3
1079
1080	# PIPE_DENSITY ([-] ) : Density {OK_STOMATE }
1081	PIPE_DENSITY = 2.e5
1082
1083	# PIPE_K1 ([-] ) : {OK_STOMATE }
1084	PIPE_K1 = 8.e3
1085
1086	# PIPE_TUNE_EXP_COEFF ([-] ) : pipe tune exponential coeff {OK_STOMATE }
1087	PIPE_TUNE_EXP_COEFF = 1.6
1088
1089	# PRECIP_CRIT ([mm/year] ) : minimum precip {OK_STOMATE }
1090	PRECIP_CRIT = 100.
1091
1092	# GDD_CRIT_ESTAB ([-] ) : minimum gdd for establishment of saplings {OK_STOMATE }
1093	GDD_CRIT_ESTAB = 150.
1094
1095	# FPC_CRIT ([-] ) : critical fpc, needed for light competition and establishment {OK_STOMATE }
1096	FPC_CRIT = 0.95
1097
1098	# ALPHA_GRASS ([-] ) : sapling characteristics : alpha's {OK_STOMATE }
1099	ALPHA_GRASS = 0.5
1100
1101	# ALPHA_TREE ([-] ) : sapling characteristics : alpha's {OK_STOMATE }
1102	ALPHA_TREE = 1.
1103
1104	# MASS_RATIO_HEART_SAP ([-] ) : mass ratio (heartwood+sapwood)/sapwood {OK_STOMATE }
1105	MASS_RATIO_HEART_SAP = 3.
1106
1107	# TAU_HUM_MONTH ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1108	TAU_HUM_MONTH = 20.
1109
1110	# TAU_HUM_WEEK ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1111	TAU_HUM_WEEK = 7.
1112
1113	# TAU_T2M_MONTH ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1114	TAU_T2M_MONTH = 20.
1115
1116	# TAU_T2M_WEEK ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1117	TAU_T2M_WEEK = 7.
1118
1119	# TAU_TSOIL_MONTH ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1120	TAU_TSOIL_MONTH = 20.
1121
1122	# TAU_SOILHUM_MONTH ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1123	TAU_SOILHUM_MONTH = 20.
1124
1125	# TAU_GPP_WEEK ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1126	TAU_GPP_WEEK = 7.
1127
1128	# TAU_GDD ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1129	TAU_GDD = 40.
1130
1131	# TAU_NGD ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1132	TAU_NGD = 50.
1133
1134	# COEFF_TAU_LONGTERM ([days] ) : time scales for phenology and other processes {OK_STOMATE }
1135	COEFF_TAU_LONGTERM = 3.
1136
1137	# BM_SAPL_CARBRES ([-] ) : {OK_STOMATE }
1138	BM_SAPL_CARBRES = 5.
1139
1140	# BM_SAPL_SAPABOVE ([-] ) : {OK_STOMATE}
1141	BM_SAPL_SAPABOVE = 0.5
1142
1143	# BM_SAPL_HEARTABOVE ([-] ) : {OK_STOMATE }
1144	BM_SAPL_HEARTABOVE = 2.
1145
1146	# BM_SAPL_HEARTBELOW ([-] ) : {OK_STOMATE }
1147	BM_SAPL_HEARTBELOW = 2.
1148
1149	# INIT_SAPL_MASS_LEAF_NAT ([-] ) : {OK_STOMATE }
1150	INIT_SAPL_MASS_LEAF_NAT = 0.1
1151
1152	# INIT_SAPL_MASS_LEAF_AGRI ([-] ) : {OK_STOMATE }
1153	INIT_SAPL_MASS_LEAF_AGRI = 1.
1154
1155	# INIT_SAPL_MASS_CARBRES ([-] ) : {OK_STOMATE }
1156	INIT_SAPL_MASS_CARBRES = 5.
1157
1158	# INIT_SAPL_MASS_ROOT ([-] ) : {OK_STOMATE }
1159	INIT_SAPL_MASS_ROOT = 0.1
1160
1161	# INIT_SAPL_MASS_FRUIT ([-] ) : {OK_STOMATE }
1162	INIT_SAPL_MASS_FRUIT = 0.3
1163
1164	# CN_SAPL_INIT ([-] ) : {OK_STOMATE }
1165	CN_SAPL_INIT = 0.5
1166
1167	# MIGRATE_TREE ([m/year] ) : {OK_STOMATE }
1168	MIGRATE_TREE = 10000.
1169
1170	# MIGRATE_GRASS ([m/year] ) : {OK_STOMATE }
1171	MIGRATE_GRASS = 10000.
1172
1173	# LAI_INITMIN_TREE ([m^2/m^2] ) : {OK_STOMATE }
1174	LAI_INITMIN_TREE = 0.3
1175
1176	# LAI_INITMIN_GRASS ([m^2/m^2] ) : {OK_STOMATE }
1177	LAI_INITMIN_GRASS = 0.1
1178
1179	# DIA_COEFF ([-] ) : {OK_STOMATE }
1180	DIA_COEFF = 4., 0.5
1181
1182	# MAXDIA_COEFF ([-] ) : {OK_STOMATE }
1183	MAXDIA_COEFF = 100., 0.01
1184
1185	# BM_SAPL_LEAF ([-] ) : {OK_STOMATE }
1186	BM_SAPL_LEAF = 4., 4., 0.8, 5.
1187
1188	# METABOLIC_REF_FRAC ([-]) : {OK_STOMATE }
1189	METABOLIC_REF_FRAC = 0.85
1190
1191	# Z_DECOMP ([m] ) : scaling depth for soil activity {OK_STOMATE }
1192	Z_DECOMP = 0.2
1193
1194	# CN ([-] ) : C/N ratio {OK_STOMATE }
1195	CN = 40., 40., 40., 40., 40., 40., 40., 40.
1196
1197	# LC ([-] ) : Lignine/C ratio of the different plant parts {OK_STOMATE }
1198	LC = 0.22, 0.35, 0.35, 0.35, 0.35, 0.22, 0.22, 0.22
1199
1200	# FRAC_SOIL_STRUCT_AA ([-]) : frac_soil(istructural,iactive,iabove) {OK_STOMATE }
1201	FRAC_SOIL_STRUCT_AA = 0.55
1202
1203	# FRAC_SOIL_STRUCT_A ([-]) : frac_soil(istructural,iactive,ibelow) {OK_STOMATE }
1204	FRAC_SOIL_STRUCT_A = 0.45
1205
1206	# FRAC_SOIL_STRUCT_SA ([-] ) : frac_soil(istructural,islow,iabove) {OK_STOMATE}
1207	FRAC_SOIL_STRUCT_SA = 0.7
1208
1209	# FRAC_SOIL_STRUCT_SB ([-] ) : frac_soil(istructural,islow,ibelow) {OK_STOMATE }
1210	FRAC_SOIL_STRUCT_SB = 0.7
1211
1212	# FRAC_SOIL_METAB_AA ([-] ) : frac_soil(imetabolic,iactive,iabove) {OK_STOMATE }
1213	FRAC_SOIL_METAB_AA = 0.45
1214
1215	# FRAC_SOIL_METAB_AB ([-] ) : frac_soil(imetabolic,iactive,ibelow) {OK_STOMATE }
1216	FRAC_SOIL_METAB_AB = 0.45
1217
1218	# METABOLIC_LN_RATIO ([-] ) : {OK_STOMATE }
1219	METABOLIC_LN_RATIO = 0.018
1220
1221	# TAU_METABOLIC ([days] ) : {OK_STOMATE }
1222	TAU_METABOLIC = 0.066
1223
1224	# TAU_STRUCT ([days]) : {OK_STOMATE }
1225	TAU_STRUCT = 0.245
1226
1227	# SOIL_Q10 ([-]) : {OK_STOMATE }
1228	SOIL_Q10 = 0.69 (
1229
1230	# TSOIL_REF ([C] ) : {OK_STOMATE }
1231	TSOIL_REF = 30.
1232
1233	# LITTER_STRUCT_COEF ([-] ) : {OK_STOMATE }
1234	LITTER_STRUCT_COEF = 3.
1235
1236	# MOIST_COEFF ([-] ) : {OK_STOMATE }
1237	MOIST_COEFF = 1.1, 2.4, 0.29
1238
1239	# MOISTCONT_MIN ([-]) : minimum soil wetness to limit the heterotrophic respiration {OK_STOMATE }
1240	MOISTCONT_MIN = 0.25
1241
1242	# FRAC_TURNOVER_DAILY ([-]) : {OK_STOMATE }
1243	FRAC_TURNOVER_DAILY = 0.55
1244
1245	# TAX_MAX ([-] ) : maximum fraction of allocatable biomass used for maintenance respiration {OK_STOMATE }
1246	TAX_MAX = 0.8
1247
1248	# MIN_GROWTHINIT_TIME ([days] ) : minimum time since last beginning of a growing season {OK_STOMATE }
1249	MIN_GROWTHINIT_TIME = 300.
1250
1251	# MOIAVAIL_ALWAYS_TREE ([-] ) : moisture availability above which moisture tendency doesn't matter {OK_STOMATE }
1252	MOIAVAIL_ALWAYS_TREE = 1.0
1253
1254	# MOIAVAIL_ALWAYS_GRASS ([-] ) : moisture availability above which moisture tendency doesn't matter {OK_STOMATE }
1255	MOIAVAIL_ALWAYS_GRASS = 0.6
1256
1257	# T_ALWAYS_ADD ([C] ) : monthly temp. above which temp. tendency doesn't matter {OK_STOMATE }
1258	T_ALWAYS_ADD = 10.
1259
1260	# GDDNCD_REF ([-] ) : {OK_STOMATE }
1261	GDDNCD_REF = 603.
1262
1263	# GDDNCD_CURVE ([-] ) : {OK_STOMATE }
1264	GDDNCD_CURVE = 0.0091
1265
1266	# GDDNCD_OFFSET ([-] ) : {OK_STOMATE }
1267	GDDNCD_OFFSET = 64.
1268
1269	# BM_SAPL_RESCALE ([-] ) : {OK_STOMATE }
1270	BM_SAPL_RESCALE = 40.
1271
1272	# MAINT_RESP_MIN_VMAX ([-] ) : {OK_STOMATE }
1273	MAINT_RESP_MIN_VMAX = 0.3
1274
1275	# MAINT_RESP_COEFF ([-] ) : {OK_STOMATE }
1276	MAINT_RESP_COEFF = 1.4
1277
1278	# FRAC_CARB_AP ([-]) : frac carb coefficients from active pool: depends on clay content {OK_STOMATE }
1279	FRAC_CARB_AP = 0.004
1280
1281	# FRAC_CARB_SA ([-]) : frac_carb_coefficients from slow pool {OK_STOMATE }
1282	FRAC_CARB_SA = 0.42
1283
1284	# FRAC_CARB_SP ([-] ) : frac_carb_coefficients from slow pool {OK_STOMATE }
1285	FRAC_CARB_SP = 0.03
1286
1287	# FRAC_CARB_PA ([-]) : frac_carb_coefficients from passive pool {OK_STOMATE }
1288	FRAC_CARB_PA = 0.45
1289
1290	# FRAC_CARB_PS ([-]) : frac_carb_coefficients from passive pool {OK_STOMATE }
1291	FRAC_CARB_PS = 0.0
1292
1293	# ACTIVE_TO_PASS_CLAY_FRAC ([-] ) : {OK_STOMATE }
1294	ACTIVE_TO_PASS_CLAY_FRAC = 0.68
1295
1296	# CARBON_TAU_IACTIVE ( [days] ) : residence times in carbon pools {OK_STOMATE }
1297	CARBON_TAU_IACTIVE = 0.149
1298
1299	# CARBON_TAU_ISLOW ([days]) : residence times in carbon pools {OK_STOMATE }
1300	CARBON_TAU_ISLOW = 7.0
1301
1302	# CARBON_TAU_IPASSIVE ([days] ) : residence times in carbon pools {OK_STOMATE }
1303	CARBON_TAU_IPASSIVE = 300.
1304
1305	# FLUX_TOT_COEFF ([days] ) : {OK_STOMATE }
1306	FLUX_TOT_COEFF = 1.2, 1.4,.75
1307
1308	# NEW_TURNOVER_TIME_REF ([days] ) : {OK_STOMATE }
1309	NEW_TURNOVER_TIME_REF = 20.
1310
1311	# LEAF_AGE_CRIT_TREF ([days] ) : {OK_STOMATE }
1312	LEAF_AGE_CRIT_TREF = 20.
1313
1314	# LEAF_AGE_CRIT_COEFF ([-] ) : {OK_STOMATE }
1315	LEAF_AGE_CRIT_COEFF = 1.5, 0.75, 10.
1316
1317	# VMAX_OFFSET ([-] ) : offset (minimum relative vcmax) {OK_STOMATE }
1318	VMAX_OFFSET = 0.3
1319
1320	# LEAFAGE_FIRSTMAX ([-] ) : leaf age at which vmax attains vcmax_opt (in fraction of critical leaf age) {OK_STOMATE }
1321	LEAFAGE_FIRSTMAX = 0.03
1322
1323	# LEAFAGE_LASTMAX ([-] ) : leaf age at which vmax falls below vcmax_opt (in fraction of critical leaf age) {OK_STOMATE }
1324	LEAFAGE_LASTMAX = 0.5
1325
1326	# LEAFAGE_OLD ([-] ) : leaf age at which vmax attains its minimum (in fraction of critical leaf age) {OK_STOMATE }
1327	LEAFAGE_OLD = 1.
1328
1329	# GPPFRAC_DORMANCE ([-]) : rapport maximal GPP/GGP_max pour dormance {OK_STOMATE }
1330	GPPFRAC_DORMANCE = 0.2
1331
1332	# TAU_CLIMATOLOGY ([days]) : tau for "climatologic variables {OK_STOMATE }
1333	TAU_CLIMATOLOGY = 20
1334
1335	# HVC1 ([-] ) : parameters for herbivore activity {OK_STOMATE }
1336	HVC1 = 0.019
1337
1338	# HVC2 ([-] ) : parameters for herbivore activity {OK_STOMATE }
1339	HVC2 = 1.38
1340
1341	# LEAF_FRAC_HVC ([-] ) : parameters for herbivore activity {OK_STOMATE }
1342	LEAF_FRAC_HVC = 0.33
1343
1344	# TLONG_REF_MAX ([K] ) : maximum reference long term temperature {OK_STOMATE }
1345	TLONG_REF_MAX = 303.1
1346
1347	# TLONG_REF_MIN ([K] ) : minimum reference long term temperature {OK_STOMATE }
1348	TLONG_REF_MIN = 253.1
1349
1350	# NCD_MAX_YEAR ([days]) : {OK_STOMATE }
1351	NCD_MAX_YEAR = 3.
1352
1353	# GDD_THRESHOLD ([days] ) : {OK_STOMATE }
1354	GDD_THRESHOLD = 5.
1355
1356	# GREEN_AGE_EVER ([-] ) : {OK_STOMATE }
1357	GREEN_AGE_EVER = 2.
1358
1359	# GREEN_AGE_DEC ([-] ) : {OK_STOMATE }
1360	GREEN_AGE_DEC = 0.5
1361
1362	# ESTAB_MAX_TREE ([-] ) : Maximum tree establishment rate {OK_DGVM}
1363	ESTAB_MAX_TREE = 0.12
1364
1365	# ESTAB_MAX_GRASS ([-] ) : Maximum grass establishment rate {OK_DGVM}
1366	ESTAB_MAX_GRASS = 0.12
1367
1368	# ESTABLISH_SCAL_FACT ([-] ) : {OK_DGVM }
1369	ESTABLISH_SCAL_FACT = 5.
1370
1371	# MAX_TREE_COVERAGE ([-] ) : {OK_DGVM }
1372	MAX_TREE_COVERAGE = 0.98
1373
1374	# IND_0_ESTAB ([-] ) : {OK_DGVM }
1375	IND_0_ESTAB = 0.2
1376
1377	# ANNUAL_INCREASE ([FLAG]) : for diagnosis of fpc increase, compare today's fpc to last year's maximum (T) or to fpc of last time step (F)? {OK_DGVM}
1378	ANNUAL_INCREASE = y
1379
1380	# MIN_COVER ([-] ) : For trees, minimum fraction of crown area occupied {OK_DGVM}
1381	MIN_COVER = 0.05
1382
1383	# IND_0 ([-] ) : initial density of individuals {OK_DGVM}
1384	IND_0 = 0.02
1385
1386	# MIN_AVAIL ([-] ) : minimum availability {OK_DGVM}
1387	MIN_AVAIL = 0.01
1388
1389	# RIP_TIME_MIN ([year] ) : {OK_DGVM}
1390	RIP_TIME_MIN = 1.25
1391
1392	# NPP_LONGTERM_INIT ([gC/m^2/year]) : {OK_DGVM}
1393	NPP_LONGTERM_INIT = 10.
1394
1395	# EVERYWHERE_INIT ([-] ) : {OK_DGVM}
1396	EVERYWHERE_INIT = 0.05
1397
1398	# PRINTLEV ([0, 1, 2, 3, 4]) : Print level for text output {}
1399	PRINTLEV = 2
1400
1401	# PRINTLEV_modname ([0, 1, 2, 3, 4]) : Specific print level of text output for the module "modname". Default as PRINTLEV. {}
1402	PRINTLEV_modname = PRINTLEV
1403
1404	# DRY_SOIL_HEAT_CAPACITY ([J.m^{-3}.K^{-1}] ) : Dry soil Heat capacity of soils {OK_SECHIBA }
1405	DRY_SOIL_HEAT_CAPACITY = 1.80e+6
1406
1407	# DRY_SOIL_HEAT_COND ([W.m^{-2}.K^{-1}] ) : Dry soil Thermal Conductivity of soils {OK_SECHIBA}
1408	DRY_SOIL_HEAT_COND = 0.40
1409
1410	# SNOW_HEAT_COND ([W.m^{-2}.K^{-1}]) : Thermal Conductivity of snow {OK_SECHIBA }
1411	SNOW_HEAT_COND = 0.3
1412
1413	# SNOW_DENSITY ([-] ) : Snow density for the soil thermodynamics {OK_SECHIBA }
1414	SNOW_DENSITY = 330.0
1415
1416	# NOBIO_WATER_CAPAC_VOLUMETRI ([s/m^2]) : {}
1417	NOBIO_WATER_CAPAC_VOLUMETRI = 150.
1418
1419	# SECHIBA_QSINT ([m]) : Interception reservoir coefficient {OK_SECHIBA }
1420	SECHIBA_QSINT = 0.02
1421
1422	# OK_FREEZE ([FLAG]) : Activate the complet soil freezing scheme {OK_SECHIBA }
1423	OK_FREEZE = TRUE
1424
1425	# READ_REFTEMP ([FLAG]) : Initialize soil temperature using climatological temperature {}
1426	READ_REFTEMP = True/False depening on OK_FREEZE
1427
1428	# OK_FREEZE_THERMIX ([FLAG]) : Activate thermal part of the soil freezing scheme {}
1429	OK_FREEZE_THERMIX = True if OK_FREEZE else false
1430
1431	# OK_ECORR ([FLAG]) : Energy correction for freezing {OK_FREEZE_THERMIX}
1432	OK_ECORR = True if OK_FREEZE else false
1433
1434	# OK_FREEZE_THAW_LATENT_HEAT ([FLAG]) : Activate latent heat part of the soil freezing scheme {}
1435	OK_FREEZE_THAW_LATENT_HEAT = FALSE
1436
1437	# fr_dT ([K] ) : Freezing window {OK_SECHIBA}
1438	fr_dT = 2.0
1439
1440	# OK_FREEZE_CWRR ([FLAG]) : CWRR freezing scheme by I. Gouttevin {}
1441	OK_FREEZE_CWRR = True if OK_FREEZE else false
1442
1443	# OK_THERMODYNAMICAL_FREEZING ([FLAG]) : Calculate frozen fraction thermodynamically {OK_FREEZE_CWRR}
1444	OK_THERMODYNAMICAL_FREEZING = True
1445
1446	# CHECK_CWRR ([FLAG]) : Calculate diagnostics to check CWRR water balance {}
1447	CHECK_CWRR = n
1448
1449	# SOIL_FRACTIONS ([-]) : Areal fraction of the 13 soil USDA textures; the dominant one is selected, Loam by default {IMPOSE_SOILT}
1450	SOIL_FRACTIONS = 0.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0
1451
1452	# CLAY_FRACTION ([-]) : Fraction of the clay fraction (0-dim mode) {IMPOSE_SOIL}
1453	CLAY_FRACTION = 0.2 if Loam
1454
1455	# SAND_FRACTION ([-] ) : Fraction of the clay fraction (0-dim mode) {IMPOSE_SOIL}
1456	SAND_FRACTION = 0.4
1457
1458	# nvan ([-]) : nvan parameter from Van genutchen equations {IMPOSE_SOIL}
1459	nvan = 1.56 if Loam
1460
1461	# avan ([-]) : avan parameter from Van genutchen equations {IMPOSE_SOIL}
1462	avan = 0.0036 if Loam
1463
1464	# mcr ([-]) : residual soil moisture {IMPOSE_SOIL}
1465	mcr = 0.078 if Loam
1466
1467	# mcs ([-]) : saturation soil moisture {IMPOSE_SOIL}
1468	mcs = 0.43 if Loam
1469
1470	# ks ([mm/d]) : saturation conductivity {IMPOSE_SOIL}
1471	ks = 249.6 if Loam
1472
1473	# mcfc ([-]) : field capacity soil moisture {IMPOSE_SOIL}
1474	mcfc = 0.1654 if caclulated from default 5 parameters above
1475
1476	# mcw ([-]) : wilting point soil moisture {IMPOSE_SOIL}
1477	mcw = 0.0884 if caclulated from default 5 parameters above
1478
1479	# GET_SLOPE ([FLAG]) : Read slopes from file and do the interpolation {}
1480	GET_SLOPE = n
1481
1482	# REINF_SLOPE ([-]) : Fraction of reinfiltrated surface runoff {}
1483	REINF_SLOPE = 0.1
1484
1485	# SECHIBA_QSINT ([m]) : Interception reservoir coefficient {OK_SECHIBA }
1486	SECHIBA_QSINT = 0.02
1487
1488	# SECHIBA_ZCANOP ([m]) : Soil level used for canopy development (if STOMATE disactivated) {OK_SECHIBA and .NOT. OK_STOMATE }
1489	SECHIBA_ZCANOP = 0.5
1490
1491	# VEGET_UPDATE ([years]) : Update vegetation frequency: 0Y or 1Y {}
1492	VEGET_UPDATE = 0Y
1493
1494	# SECHIBA_VEGMAX ([-]) : Maximum vegetation distribution within the mesh (0-dim mode) {IMPOSE_VEG}
1495	SECHIBA_VEGMAX = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
1496
1497	# SECHIBA_FRAC_NOBIO ([-]) : Fraction of other surface types within the mesh (0-dim mode) {IMPOSE_VEG}
1498	SECHIBA_FRAC_NOBIO = 0.0
1499
1500	# SECHIBA_LAI ([-]) : LAI for all vegetation types (0-dim mode) {IMPOSE_VEG}
1501	SECHIBA_LAI = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2.
1502
1503	# SLOWPROC_HEIGHT ([m]) : Height for all vegetation types {OK_SECHIBA}
1504	SLOWPROC_HEIGHT = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0
1505
1506	# LAI_FILE ([FILE]) : Name of file from which the vegetation map is to be read {LAI_MAP}
1507	LAI_FILE = lai2D.nc
1508
1509	# RENORM_LAI ([FLAG]) : flag to force LAI renormelization {LAI_MAP}
1510	RENORM_LAI = n
1511
1512	# VEGETATION_FILE ([FILE]) : Name of file from which the vegetation map is to be read {}
1513	VEGETATION_FILE = PFTmap.nc
1514
1515	# SPMIPEXP ([-]) : Types of alternative hydraulic parameters {}
1516	SPMIPEXP = 'texture'
1517
1518	# UNIF_CASE ([-]) : Types of uniform soil textures in SPMIP {SPMIPEXP='unif'}
1519	UNIF_CASE = 'b'
1520
1521	# SOILCLASS_FILE ([FILE]) : Name of file from which soil types are read {NOT(IMPOSE_VEG)}
1522	SOILCLASS_FILE = soils_param.nc
1523
1524	# PARAM_FILE ([FILE]) : Name of file from which soil parameter values are read {params_sp_mip.nc}
1525	PARAM_FILE = params_sp_mip.nc
1526
1527	# SLOPE_NOREINF ([%]) : Slope over which surface runoff does not reinfiltrate {}
1528	SLOPE_NOREINF = 0.5
1529
1530	# TOPOGRAPHY_FILE ([FILE]) : Name of file from which the topography map is to be read {}
1531	TOPOGRAPHY_FILE = cartepente2d_15min.nc
1532
1533	# WOODHARVEST_FILE ([FILE]) : Name of file from which the wood harvest will be read {DO_WOOD_HARVEST}
1534	WOODHARVEST_FILE = woodharvest.nc
1535
1536	# SOILALB_FILE ([FILE]) : Name of file from which the bare soil albedo {NOT(IMPOSE_AZE)}
1537	SOILALB_FILE = soils_param.nc
1538
1539	# ALB_BG_FILE ([FILE]) : Name of file from which the background albedo is read {ALB_BG_MODIS}
1540	ALB_BG_FILE = alb_bg.nc
1541
1542	# CDRAG_FROM_GCM ([FLAG]) : Keep cdrag coefficient from gcm. {OK_SECHIBA}
1543	CDRAG_FROM_GCM = y
1544
1545	# N_FERTIL_FILE (- ) : File name {CHEMISTRY_BVOC and NOx_FERTILIZERS_USE}
1546	N_FERTIL_FILE = orchidee_fertilizer_1995.nc
1547
1548	# N_FERTIL_FILE (-) : File name {CHEMISTRY_BVOC and NOx_FERTILIZERS_USE}
1549	N_FERTIL_FILE = orchidee_fertilizer_1995.nc
1550
1551	# ENERBIL_TSURF (Kelvin [K]) : Initial temperature if not found in restart {OK_SECHIBA}
1552	ENERBIL_TSURF = 280.
1553
1554	# ENERBIL_EVAPOT () : Initial Soil Potential Evaporation {OK_SECHIBA }
1555	ENERBIL_EVAPOT = 0.0
1556
1557	# BEDROCK_FLAG ([FLAG]) : Flag to consider bedrock at deeper layers. {}
1558	BEDROCK_FLAG = 0
1559
1560	# THERMOSOIL_TPRO (Kelvin [K]) : Initial soil temperature profile if not found in restart {OK_SECHIBA}
1561	THERMOSOIL_TPRO = 280.
1562
1563	# SOIL_REFTEMP_FILE ([FILE]) : File with climatological soil temperature {READ_REFTEMP}
1564	SOIL_REFTEMP_FILE = reftemp.nc
1565
1566	# KFACT_ROOT_TYPE ([mm/d]) : keyword added for spmip exp1 and exp4 to get a constant ks over soil depth and rootzone {spmip exp1 or exp4}
1567	KFACT_ROOT_TYPE = var
1568
1569	# DO_PONDS ([FLAG]) : Should we include ponds {}
1570	DO_PONDS = n
1571
1572	# FROZ_FRAC_CORR ([-]) : Coefficient for the frozen fraction correction {OK_FREEZE}
1573	FROZ_FRAC_CORR = 1.0
1574
1575	# MAX_FROZ_HYDRO ([-]) : Coefficient for the frozen fraction correction {OK_FREEZE}
1576	MAX_FROZ_HYDRO = 1.0
1577
1578	# SMTOT_CORR ([-]) : Coefficient for the frozen fraction correction {OK_FREEZE}
1579	SMTOT_CORR = 2.0
1580
1581	# DO_RSOIL ([FLAG]) : Should we reduce soil evaporation with a soil resistance {}
1582	DO_RSOIL = n
1583
1584	# OK_DYNROOT ([FLAG]) : Calculate dynamic root profile to optimize soil moisture usage {}
1585	OK_DYNROOT = n
1586
1587	# WETNESS_TRANSPIR_MAX ([-] ) : Soil moisture above which transpir is max, for each soil texture class {}
1588	WETNESS_TRANSPIR_MAX = 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8
1589
1590	# VWC_MIN_FOR_WET_ALB ([m3/m3] ) : Vol. wat. cont. above which albedo is cst {}
1591	VWC_MIN_FOR_WET_ALB = 0.25, 0.25, 0.25
1592
1593	# VWC_MAX_FOR_DRY_ALB ([m3/m3] ) : Vol. wat. cont. below which albedo is cst {}
1594	VWC_MAX_FOR_DRY_ALB = 0.1, 0.1, 0.1
1595
1596	# HYDROL_MOISTURE_CONTENT ([m3/m3]) : Soil moisture on each soil tile and levels {}
1597	HYDROL_MOISTURE_CONTENT = 0.3
1598
1599	# US_INIT ([-]) : US_NVM_NSTM_NSLM {}
1600	US_INIT = 0.0
1601
1602	# ZWT_FORCE ([m]) : Prescribed water depth, dimension nstm {}
1603	ZWT_FORCE = -9999. -9999. -9999.
1604
1605	# FREE_DRAIN_COEF ([-]) : Coefficient for free drainage at bottom, dimension nstm {}
1606	FREE_DRAIN_COEF = 1.0 1.0 1.0
1607
1608	# WATER_TO_INFILT ([mm]) : Water to be infiltrated on top of the soil {}
1609	WATER_TO_INFILT = 0.0
1610
1611	# EVAPNU_SOIL ([mm]) : Bare soil evap on each soil if not found in restart {}
1612	EVAPNU_SOIL = 0.0
1613
1614	# HYDROL_SNOW () : Initial snow mass if not found in restart {OK_SECHIBA}
1615	HYDROL_SNOW = 0.0
1616
1617	# HYDROL_SNOWAGE (***) : Initial snow age if not found in restart {OK_SECHIBA}
1618	HYDROL_SNOWAGE = 0.0
1619
1620	# HYDROL_SNOW_NOBIO ([mm]) : Initial snow amount on ice, lakes, etc. if not found in restart {OK_SECHIBA}
1621	HYDROL_SNOW_NOBIO = 0.0
1622
1623	# HYDROL_SNOW_NOBIO_AGE (***) : Initial snow age on ice, lakes, etc. if not found in restart {OK_SECHIBA}
1624	HYDROL_SNOW_NOBIO_AGE = 0.0
1625
1626	# HYDROL_QSV ([mm]) : Initial water on canopy if not found in restart {OK_SECHIBA}
1627	HYDROL_QSV = 0.0
1628
1629	# CWRR_NKS_N0 ([-]) : fitted value for relation log((n-n0)/(n_ref-n0)) {}
1630	CWRR_NKS_N0 = 0.0
1631
1632	# CWRR_NKS_POWER ([-]) : fitted value for relation log((n-n0)/(n_ref-n0)) {}
1633	CWRR_NKS_POWER = 0.0
1634
1635	# CWRR_AKS_A0 ([1/mm]) : fitted value for relation log((a-a0)/(a_ref-a0)) {}
1636	CWRR_AKS_A0 = 0.0
1637
1638	# CWRR_AKS_POWER ([-]) : fitted value for relation log((a-a0)/(a_ref-a0)) {}
1639	CWRR_AKS_POWER = 0.0
1640
1641	# KFACT_DECAY_RATE ([1/m]) : Factor for Ks decay with depth {}
1642	KFACT_DECAY_RATE = 2.0
1643
1644	# KFACT_STARTING_DEPTH ([m]) : Depth for compacted value of Ks {}
1645	KFACT_STARTING_DEPTH = 0.3
1646
1647	# KFACT_MAX ([-]) : Maximum Factor for Ks increase due to vegetation {}
1648	KFACT_MAX = 10.0
1649
1650	# DT_ROUTING ([seconds]) : Time step of the routing scheme {RIVER_ROUTING}
1651	DT_ROUTING = 86400.
1652
1653	# ROUTING_RIVERS ([-]) : Number of rivers {RIVER_ROUTING}
1654	ROUTING_RIVERS = 50
1655
1656	# DO_FLOODINFILT ([FLAG]) : Should floodplains reinfiltrate into the soil {RIVER_ROUTING}
1657	DO_FLOODINFILT = n
1658
1659	# DO_SWAMPS ([FLAG]) : Should we include swamp parameterization {RIVER_ROUTING}
1660	DO_SWAMPS = n
1661
1662	# DO_PONDS ([FLAG]) : Should we include ponds {RIVER_ROUTING}
1663	DO_PONDS = n
1664
1665	# SLOW_TCST ([days]) : Time constant for the slow reservoir {RIVER_ROUTING }
1666	SLOW_TCST = 25.0
1667
1668	# FAST_TCST ([days]) : Time constant for the fast reservoir {RIVER_ROUTING }
1669	FAST_TCST = 3.0
1670
1671	# STREAM_TCST ([days]) : Time constant for the stream reservoir {RIVER_ROUTING}
1672	STREAM_TCST = 0.24
1673
1674	# FLOOD_TCST ([days]) : Time constant for the flood reservoir {RIVER_ROUTING}
1675	FLOOD_TCST = 4.0
1676
1677	# SWAMP_CST ([-]) : Fraction of the river that flows back to swamps {RIVER_ROUTING}
1678	SWAMP_CST = 0.2
1679
1680	# FLOOD_BETA ([-] ) : Parameter to fix the shape of the floodplain {RIVER_ROUTING}
1681	FLOOD_BETA = 2.0
1682
1683	# POND_BETAP ([-] ) : Ratio of the basin surface intercepted by ponds and the maximum surface of ponds {RIVER_ROUTING}
1684	POND_BETAP = 0.5
1685
1686	# FLOOD_CRI ([mm] ) : Potential height for which all the basin is flooded {DO_FLOODPLAINS or DO_PONDS}
1687	FLOOD_CRI = 2000.
1688
1689	# POND_CRI ([mm] ) : Potential height for which all the basin is a pond {DO_FLOODPLAINS or DO_PONDS}
1690	POND_CRI = 2000.
1691
1692	# MAX_LAKE_RESERVOIR ([kg/m2(routing area)] ) : Maximum limit of water in lake_reservoir {RIVER_ROUTING}
1693	MAX_LAKE_RESERVOIR = 7000
1694
1695	# RIVER_DESC ([FLAG]) : Writes out a description of the rivers {RIVER_ROUTING}
1696	RIVER_DESC = n
1697
1698	# RIVER_DESC_FILE ([FILE]) : Filename in which we write the description of the rivers. If suffix is ".nc" a netCDF file is created {RIVER_DESC}
1699	RIVER_DESC_FILE = river_desc.nc
1700
1701	# ROUTING_FILE ([FILE]) : Name of file which contains the routing information {RIVER_ROUTING}
1702	ROUTING_FILE = routing.nc
1703
1704	# IRRIGATION_FILE ([FILE]) : Name of file which contains the map of irrigated areas {DO_IRRIGATION OR DO_FLOODPLAINS}
1705	IRRIGATION_FILE = floodplains.nc
1706
1707	# ROUTING_METHOD (character string) : Choice of routing module to be used {RIVER_ROUTING=T}
1708	ROUTING_METHOD = standard
1709
1710	# EPS_CARBON ([%] ) : Allowed error on carbon stock {SPINUP_ANALYTIC}
1711	EPS_CARBON = 0.01
1712
1713	# SPINUP_PERIOD ([years] ) : Period to calulcate equilibrium during spinup analytic {SPINUP_ANALYTIC}
1714	SPINUP_PERIOD = -1
1715
1716	# STOMATE_FORCING_NAME ([FILE]) : Name of STOMATE's forcing file {OK_STOMATE}
1717	STOMATE_FORCING_NAME = NONE
1718
1719	# STOMATE_FORCING_MEMSIZE ([MegaBytes]) : Size of STOMATE forcing data in memory {OK_STOMATE}
1720	STOMATE_FORCING_MEMSIZE = 50
1721
1722	# STOMATE_CFORCING_NAME ([FILE]) : Name of STOMATE's carbon forcing file {OK_STOMATE}
1723	STOMATE_CFORCING_NAME = NONE
1724
1725	# FORCESOIL_STEP_PER_YEAR ([days, months, year]) : Number of time steps per year for carbon spinup. {OK_STOMATE}
1726	FORCESOIL_STEP_PER_YEAR = 365
1727
1728	# FORCESOIL_NB_YEAR ([years]) : Number of years saved for carbon spinup. {OK_STOMATE}
1729	FORCESOIL_NB_YEAR = 1
1730
1731	# XIOS_ORCHIDEE_OK ([FLAG]) : Use XIOS for writing diagnostics file {}
1732	XIOS_ORCHIDEE_OK = y
1733
1734	# XIOS_INTERPOLATION ([FLAG]) : Actiave reading and intrepolation using XIOS {XIOS_ORCHIDEE_OK}
1735	XIOS_INTERPOLATION = n
1736
1737	# XIOS_REMAP_OUTPUT ([FLAG]) : Actiave remaping of diagnostic output files to regular grid {XIOS_ORCHIDEE_OK .AND. grid_type=unstructured}
1738	XIOS_REMAP_OUTPUT = True
1739
1740	# DT_STOMATE ([seconds]) : Time step of STOMATE and other slow processes {OK_STOMATE}
1741	DT_STOMATE = 86400.
1742

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format