source: branches/ORCHIDEE_2_2/ORCHIDEE/orchidee.default @ 7406

#
#
#  WARNING !!! 
#  DO NOT MODIFY THIS FILE.
#  THIS FILE IS ONLY PROVIDING INFORMATION ABOUT DEFAULT PARAMETER SETTINGS IN ORCHIDEE. 
#
#*******************************************************************************************
#                    Namelist for ORCHIDEE 
#*******************************************************************************************
#
#  For more details, see : http://forge.ipsl.jussieu.fr/orchidee/wiki/Documentation/OrchideeParameters 
#
#  Note : [m] : meters; [K] : Kelvin degrees; [C] : Celsius degrees
#

#*******************************************************************************************
#          ORCHIDEE driver parameters (read in Off-line mode only) 
#*******************************************************************************************

# LWDOWN_CONS ([FLAG]) :  Conserve longwave downwelling radiation in the forcing        {}
LWDOWN_CONS =  n 

# SWDOWN_CONS ([FLAG]) :  Conserve shortwave downwelling radiation in the forcing       {}
SWDOWN_CONS =  LWDOWN_CONS 

# FORCING_FILE ([FILE] ) :  Name of file containing the forcing data    {[-]}
FORCING_FILE =  forcing_file.nc 

# DT_SECHIBA ([seconds]) :  Time-step of the SECHIBA component  {NOT(WEATHERGEN)}
DT_SECHIBA =  1800. 

# RESTART_FILEIN ([FILE]) :  Name of restart to READ for initial conditions     {[-]}
RESTART_FILEIN =  NONE 

# RESTART_FILEOUT ([FILE]) :  Name of restart files to be created by the driver         {[-]}
RESTART_FILEOUT =  driver_rest_out.nc 

# DRIVER_reset_time ([FLAG]) :  Overwrite time values from the driver restart file      {[-]}
DRIVER_reset_time =  n 

# TIME_SKIP ([seconds, days, months, years]) :  Time in the forcing file at which the model is started.         {[-]}
TIME_SKIP =  0 

# TIME_LENGTH ([seconds, days, months, years]) :  Length of the integration in time.    {[-]}
TIME_LENGTH =  Full length of the forcing file  

# RELAXATION ([FLAG]) :  method of forcing      {[-]}
RELAXATION =  n 

# RELAX_A ([days?]) :  Time constant of the relaxation layer    {RELAXATION}
RELAX_A =  1.0 

# SPREAD_PREC ([-]) :  On how long we spread the precipitation, value in nb of dt_sechiba       {[-]}
SPREAD_PREC =  Half of the forcing time step or uniform, depending on dt_force (greater than 3h or not, respectively)

# SPREAD_PREC_SEC ([s]) : On how long we spread the precipitation, value in seconds {NEW_DRIVER}
# If this keyword is not set, SPREAD_PREC is used, whether defined in run.def or by default
SPREAD_PREC_SEC = 3600

# SPREAD_PREC_CONT ([s]) : Makes the spreading uniform if it still rains at following forcing time step {NEW_DRIVER}
SPREAD_PREC_CONT = n

# ATM_CO2 ([ppm]) :  Value to precribe atmospheric CO2  {[FORCE_CO2_VEG=y or Offline mode]}
ATM_CO2 =  350. 

# ALLOW_WEATHERGEN ([FLAG]) :  Allow weather generator to create data   {[-]}
ALLOW_WEATHERGEN =  n 

# DT_WEATHGEN ([seconds]) :  Calling frequency of weather generator     {ALLOW_WEATHERGEN}
DT_WEATHGEN =  1800. 

# LIMIT_WEST ([Degrees] ) :  Western limit of region    {[-]}
LIMIT_WEST =  -180. 

# LIMIT_EAST ([Degrees] ) :  Eastern limit of region    {[-]}
LIMIT_EAST =  180. 

# LIMIT_NORTH ([Degrees]) :  Northern limit of region   {[-]}
LIMIT_NORTH =  90. 

# LIMIT_SOUTH ([Degrees]) :  Southern limit of region   {[-]}
LIMIT_SOUTH =  -90. 

# MERID_RES ([Degrees]) :  North-South Resolution       {ALLOW_WEATHERGEN}
MERID_RES =  2. 

# ZONAL_RES ([Degrees] ) :  East-West Resolution        {ALLOW_WEATHERGEN}
ZONAL_RES =  2. 

# HEIGHT_LEV1 ([m]) :  Height at which T and Q are given        {offline mode}
HEIGHT_LEV1 =  2.0 

# HEIGHT_LEVW ([m]) :  Height at which the wind is given        {offline mode}
HEIGHT_LEVW =  10.0 

# NBUFF (-) :  Number of time steps of data to buffer between each reading of the forcing file  {OFF_LINE}
NBUFF =  1 

# IPPREC ([-] ) :  Use prescribed values        {ALLOW_WEATHERGEN}
IPPREC =  0 

# WEATHGEN_PRECIP_EXACT ([FLAG]) :  Exact monthly precipitation         {ALLOW_WEATHERGEN}
WEATHGEN_PRECIP_EXACT =  n 

# DUMP_WEATHER ([FLAG]) :  Write weather from generator into a forcing file     {ALLOW_WEATHERGEN  }
DUMP_WEATHER =  n 

# DUMP_WEATHER_FILE ([FILE]) :  Name of the file that contains the weather from generator       {DUMP_WEATHER}
DUMP_WEATHER_FILE =  weather_dump.nc 

# DUMP_WEATHER_GATHERED ([FLAG]) :  Dump weather data on gathered grid  {DUMP_WEATHER}
DUMP_WEATHER_GATHERED =  y 

# HEIGHT_LEV1_DUMP ([m]) :      {DUMP_WEATHER}
HEIGHT_LEV1_DUMP =  10. 

#*******************************************************************************************
#          ORCHIDEE parameters  
#*******************************************************************************************

# SOILTYPE_CLASSIF ([-]) :  Type of soil texture classification (for hydraulic and thermic properties)          {!IMPOSE_VEG}
SOILTYPE_CLASSIF =  zobler

# SPMIPEXP ([-]) : For alternative ways to prescribe hydraulic soil parameters (thermic params still defined from soil texture)
#   maps to read maps of soil parameter as in the SP-MIP project
#   unif to impose uniforme texture over the globe (4 texture options, see UNIF_CASE, with parameter values imposed by SP-MIP)
#   texture for default behavior in which all soil parameters stem from soil texture
SPMIPEXP = texture

# UNIF_CASE ([-]) to define one of 4 uniform textures: 'a' for loamy sand, 'b' for loam, 'c' for silt, 'd' for clay {SPMIPEXP}
UNIF_CASE = b

# KFACT_ROOT_TYPE ([-]): var or cons, to make kfact_root=1 throughout the soil (no impact of roots on ks profile)
KFACT_ROOT_TYPE = var

# RIVER_ROUTING ([FLAG]) :  Decides if we route the water or not        {OK_SECHIBA}
RIVER_ROUTING =  y 

# DO_IRRIGATION ([FLAG]) :  Should we compute an irrigation flux        {RIVER_ROUTING }
DO_IRRIGATION =  n 

# DO_FLOODPLAINS ([FLAG]  ) :  Should we include floodplains    {RIVER_ROUTING }
DO_FLOODPLAINS =  n 

# STOMATE_OK_STOMATE ([FLAG]) :  Activate STOMATE?      {OK_SECHIBA}
STOMATE_OK_STOMATE =  y 

# DO_WOOD_HARVEST ([FLAG]) :  Activate Wood Harvest ?   {OK_STOMATE}
DO_WOOD_HARVEST =  y 

# STOMATE_OK_DGVM ([FLAG]) :  Activate DGVM?    {OK_STOMATE}
STOMATE_OK_DGVM =  n 

# CHEMISTRY_BVOC ([FLAG]) :  Activate calculations for BVOC     {OK_SECHIBA}
CHEMISTRY_BVOC =  n 

# CHEMISTRY_LEAFAGE ([FLAG]) :  Activate LEAFAGE?       {CHEMISTRY_BVOC}
CHEMISTRY_LEAFAGE =  n 

# CANOPY_EXTINCTION  ([FLAG]) :  Use canopy radiative transfer model?   {CHEMISTRY_BVOC }
CANOPY_EXTINCTION  =  n 

# CANOPY_MULTILAYER ([FLAG]) :  Use canopy radiative transfer model with multi-layers   {CANOPY_EXTINCTION }
CANOPY_MULTILAYER =  n 

# NOx_RAIN_PULSE ([FLAG]) :  Calculate NOx emissions with pulse?        {CHEMISTRY_BVOC }
NOx_RAIN_PULSE =  n 

# NOx_BBG_FERTIL ([FLAG]) :  Calculate NOx emissions with bbg fertilizing effect?       {CHEMISTRY_BVOC }
NOx_BBG_FERTIL =  n 

# NOx_FERTILIZERS_USE ([FLAG] ) :  Calculate NOx emissions with fertilizers use?        {CHEMISTRY_BVOC }
NOx_FERTILIZERS_USE =  n 

# NVM ([-]) :  number of PFTs           {OK_SECHIBA or OK_STOMATE}
NVM =  13 

# IMPOSE_PARAM ([FLAG]) :  Do you impose the values of the parameters?  {OK_SECHIBA or OK_STOMATE}
IMPOSE_PARAM =  y 

# DEPTH_MAX_T (m) :  Maximum depth of the soil thermodynamics   {}
DEPTH_MAX_T =  90.0 

# DEPTH_MAX_H (m) :  Maximum depth of soil moisture     {}
DEPTH_MAX_H =  2.0 

# DEPTH_TOPTHICK (m) :  Thickness of upper most Layer   {}
DEPTH_TOPTHICK =  9.77517107e-04 

# DEPTH_CSTTHICK (m) :  Depth at which constant layer thickness start   {}
DEPTH_CSTTHICK =  DEPTH_MAX_H  

# REFINEBOTTOM (-) :  Depth at which the hydrology layers will be refined towards the bottom.   {}
REFINEBOTTOM =  .FALSE. 

# DEPTH_GEOM (m) :  Depth at which we resume geometrical increases for temperature      {}
DEPTH_GEOM =  DEPTH_MAX_H  

# RATIO_GEOM_BELOW (-) :  Ratio of the geometrical series defining the thickness below DEPTH_GEOM       {}
RATIO_GEOM_BELOW =  2 

# ALMA_OUTPUT ([FLAG]) :  Should the output follow the ALMA convention  {OK_SECHIBA}
ALMA_OUTPUT =  n 

# OUTPUT_FILE ([FILE]) :  Name of file in which the output is going to be written       {OK_SECHIBA}
OUTPUT_FILE =  sechiba_history.nc 

# WRITE_STEP ([seconds]) :  Frequency in seconds for sechiba_history.nc file with IOIPSL        {OK_SECHIBA, NOT XIOS_ORCHIDEE_OK}
WRITE_STEP =  86400. 

# SECHIBA_HISTLEVEL ([-]) :  SECHIBA history output level (0..10)       {OK_SECHIBA and HF}
SECHIBA_HISTLEVEL =  5 

# SECHIBA_HISTFILE2 ([FLAG]) :  Flag to switch on histfile 2 for SECHIBA (hi-frequency ?)       {OK_SECHIBA}
SECHIBA_HISTFILE2 =  n 

# WRITE_STEP2 ([seconds]) :  Frequency in seconds at which to WRITE output      {SECHIBA_HISTFILE2}
WRITE_STEP2 =  1800.0 

# SECHIBA_OUTPUT_FILE2 ([FILE]) :  Name of file in which the output number 2 is going to be written     {SECHIBA_HISTFILE2}
SECHIBA_OUTPUT_FILE2 =  sechiba_out_2.nc 

# SECHIBA_HISTLEVEL2 ([-] ) :  SECHIBA history 2 output level (0..10)   {SECHIBA_HISTFILE2}
SECHIBA_HISTLEVEL2 =  1 

# STOMATE_OUTPUT_FILE ([FILE]) :  Name of file in which STOMATE's output is going to be written         {OK_STOMATE}
STOMATE_OUTPUT_FILE =  stomate_history.nc 

# STOMATE_HIST_DT ([days]) :  STOMATE history time step         {OK_STOMATE}
STOMATE_HIST_DT =  10. 

# STOMATE_IPCC_OUTPUT_FILE ([FILE]) :  Name of file in which STOMATE's output is going to be written    {OK_STOMATE}
STOMATE_IPCC_OUTPUT_FILE =  stomate_ipcc_history.nc 

# STOMATE_IPCC_HIST_DT ([days]) :  STOMATE IPCC history time step       {OK_STOMATE}
STOMATE_IPCC_HIST_DT =  0. 

# OK_HISTSYNC ([FLAG]) :  Syncronize and write IOIPSL output files at each time step    {}
OK_HISTSYNC =  FALSE 

# STOMATE_HISTLEVEL ([-]) :  STOMATE history output level (0..10)       {OK_STOMATE}
STOMATE_HISTLEVEL =  10 

# SECHIBA_restart_in ([FILE]) :  Name of restart to READ for initial conditions         {OK_SECHIBA }
SECHIBA_restart_in =  NONE 

# SECHIBA_rest_out ([FILE]) :  Name of restart files to be created by SECHIBA   {OK_SECHIBA}
SECHIBA_rest_out =  sechiba_rest_out.nc 

# STOMATE_RESTART_FILEIN ([FILE]) :  Name of restart to READ for initial conditions of STOMATE  {STOMATE_OK_STOMATE}
STOMATE_RESTART_FILEIN =  NONE 

# STOMATE_RESTART_FILEOUT ([FILE]) :  Name of restart files to be created by STOMATE    {STOMATE_OK_STOMATE}
STOMATE_RESTART_FILEOUT =  stomate_rest_out.nc 

# FORCE_CO2_VEG ([FLAG]) :  Flag to force the value of atmospheric CO2 for vegetation.  {Only in coupled mode}
FORCE_CO2_VEG =  FALSE 

# TAU_OUTFLOW ([days]) :  Number of days over which the coastal- and riverflow will be distributed      {Only in coupled mode}
TAU_OUTFLOW =  0 

# ECCENTRICITY ([-]) :  Use prescribed values   {ALLOW_WEATHERGEN}
ECCENTRICITY =  0.016724 

# PERIHELIE ([-]) :  Use prescribed values      {ALLOW_WEATHERGEN}
PERIHELIE =  102.04 

# OBLIQUITY ([Degrees]) :  Use prescribed values        {ALLOW_WEATHERGEN}
OBLIQUITY =  23.446 

# PFT_TO_MTC ([-]) :  correspondance array linking a PFT to MTC         {OK_SECHIBA or OK_STOMATE}
PFT_TO_MTC =  1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 

# PFT_NAME ([-]) :  Name of a PFT       {OK_SECHIBA or OK_STOMATE}
PFT_NAME =  bare ground, tropical broad-leaved evergreen, tropical broad-leaved raingreen, temperate needleleaf evergreen, temperate broad-leaved evergreen, temperate broad-leaved summergreen,  boreal needleleaf evergreen, boreal broad-leaved summergreen, boreal needleleaf summergreen,  C3 grass, C4 grass, C3 agriculture, C4 agriculture  

# LEAF_TAB ([-] ) :  leaf type : 1      {OK_STOMATE}
LEAF_TAB =  4, 1, 1, 2, 1, 1, 2, 1, 2, 3, 3, 3, 3  

# PHENO_MODEL ([-] ) :  which phenology model is used? (tabulated)      {OK_STOMATE}
PHENO_MODEL =  none, none, moi, none, none, ncdgdd, none, ncdgdd, ngd, moigdd, moigdd, moigdd, moigdd 

# SECHIBA_LAI ([m^2/m^2]) :  laimax for maximum lai(see also type of lai interpolation)         {OK_SECHIBA or IMPOSE_VEG}
SECHIBA_LAI =  0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 

# LLAIMIN ([m^2/m^2]) :  laimin for minimum lai(see also type of lai interpolation)     {OK_SECHIBA or IMPOSE_VEG}
LLAIMIN =  0., 8., 0., 4., 4.5, 0., 4., 0., 0., 0., 0., 0., 0. 

# SLOWPROC_HEIGHT ([m] ) :  prescribed height of vegetation     {OK_SECHIBA}
SLOWPROC_HEIGHT =  0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1., 1. 

# Z0_OVER_HEIGHT ([-] ) :  factor to calculate roughness height from height of canopy   {OK_SECHIBA}
Z0_OVER_HEIGHT =  0., 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625, 0.0625 

# RATIO_Z0M_Z0H ([-]) :  Ratio between z0m and z0h      {OK_SECHIBA}
RATIO_Z0M_Z0H =  1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0  

# TYPE_OF_LAI ([-]) :  Type of behaviour of the LAI evolution algorithm         {OK_SECHIBA}
TYPE_OF_LAI =  inter, inter, inter, inter, inter, inter, inter, inter, inter, inter, inter, inter, inter 

# NATURAL ([BOOLEAN]) :  natural?       {OK_SECHIBA, OK_STOMATE}
NATURAL =  y, y, y, y, y, y, y, y, y, y, y, n, n  

# IS_C4 ([BOOLEAN]) :  flag for C4 vegetation types     {OK_SECHIBA or OK_STOMATE}
IS_C4 =  n, n, n, n, n, n, n, n, n, n, n, y, n, y 

# VCMAX_FIX ([micromol/m^2/s] ) :  values used for vcmax when STOMATE is not activated  {OK_SECHIBA and NOT(OK_STOMATE)}
VCMAX_FIX =  0., 40., 50., 30., 35., 40.,30., 40., 35., 60., 60., 70., 70. 

# DOWNREG_CO2 ([-]) :  coefficient for CO2 downregulation (unitless)    {OK_CO2 and DOWNREGULATION_CO2}
DOWNREG_CO2 =  0., 0.38, 0.38, 0.28, 0.28, 0.28, 0.22, 0.22, 0.22, 0.26, 0.26, 0.26, 0.26 

# DOWNREG_CO2_NEW ([-]) :  coefficient for CO2 downregulation (unitless)        {OK_CO2 and DOWNREGULATION_CO2_NEW}
DOWNREG_CO2_NEW =  0., 0.35, 0.35, 0.26, 0.26, 0.26, 0.20, 0.20, 0.20, 0.24, 0.03, 0.24, 0.03 

# E_KmC ([J mol-1]) :  Energy of activation for KmC     {}
E_KmC =  -9999.,  79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430., 79430. 

# E_KmO ([J mol-1]) :  Energy of activation for KmO     {}
E_KmO =  -9999., 36380.,  36380.,  36380.,  36380.,  36380., 36380., 36380., 36380., 36380., 36380., 36380., 36380. 

# E_Sco ([J mol-1]) :  Energy of activation for Sco     {}
E_Sco =  -9999., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460., -24460. 

# E_gamma_star ([J mol-1]) :  Energy of activation for gamma_star       {}
E_gamma_star =  -9999., 37830.,  37830.,  37830.,  37830.,  37830., 37830., 37830., 37830., 37830., 37830., 37830., 37830. 

# E_Vcmax ([J mol-1]) :  Energy of activation for Vcmax         {}
E_Vcmax =  -9999., 71513., 71513., 71513., 71513., 71513., 71513., 71513., 71513., 71513., 67300., 71513., 67300. 

# E_Jmax ([J mol-1]) :  Energy of activation for Jmax   {}
E_Jmax =  -9999., 49884., 49884., 49884., 49884., 49884., 49884., 49884., 49884., 49884., 77900., 49884., 77900.  

# aSV ([J K-1 mol-1]) :  a coefficient of the linear regression (a+bT) defining the Entropy term for Vcmax      {}
aSV =  -9999., 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 668.39, 641.64, 668.39, 641.64  

# bSV ([J K-1 mol-1 °C-1]) :  b coefficient of the linear regression (a+bT) defining the Entropy term for Vcmax        {}
bSV =  -9999., -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, -1.07, 0., -1.07, 0.  

# TPHOTO_MIN ([-]) :  minimum photosynthesis temperature (deg C)        {OK_STOMATE}
TPHOTO_MIN =  -9999.,  -4., -4., -4., -4.,-4.,-4., -4., -4., -4., -4., -4., -4. 

# TPHOTO_MAX ([-]) :  maximum photosynthesis temperature (deg C)        {OK_STOMATE}
TPHOTO_MAX =  -9999., 55., 55., 55., 55., 55., 55., 55., 55., 55., 55., 55., 55. 

# aSJ ([J K-1 mol-1]) :  a coefficient of the linear regression (a+bT) defining the Entropy term for Jmax       {}
aSJ =  -9999., 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 659.70, 630., 659.70, 630.  

# bSJ ([J K-1 mol-1 °C-1]) :  b coefficient of the linear regression (a+bT) defining the Entropy term for Jmax         {}
bSJ =  -9999., -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, -0.75, 0., -0.75, 0.  

# D_Vcmax ([J mol-1]) :  Energy of deactivation for Vcmax       {}
D_Vcmax =  -9999., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 192000., 200000., 192000. 

# D_Jmax ([J mol-1]) :  Energy of deactivation for Jmax         {}
D_Jmax =  -9999., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 200000., 192000., 200000., 192000. 

# E_gm  ([J mol-1] ) :  Energy of activation for gm     { }
E_gm  =  -9999., 49600., 49600., 49600., 49600., 49600., 49600., 49600., 49600., 49600., -9999., 49600., -9999.  

# S_gm  ([J K-1 mol-1] ) :  Entropy term for gm         { }
S_gm  =  -9999., 1400., 1400., 1400., 1400., 1400., 1400., 1400., 1400., 1400., -9999., 1400., -9999.  

# D_gm  ([J mol-1] ) :  Energy of deactivation for gm   { }
D_gm  =  -9999., 437400., 437400., 437400., 437400., 437400., 437400., 437400., 437400., 437400., -9999., 437400., -9999.  

# E_Rd ([J mol-1]) :  Energy of activation for Rd       {}
E_Rd =  -9999., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390., 46390. 

# VCMAX25 ([micromol/m^2/s]) :  Maximum rate of Rubisco activity-limited carboxylation at 25°C         {OK_STOMATE}
VCMAX25 =  -9999., 45.0, 45.0, 35.0, 40.0, 50.0, 45.0, 35.0, 35.0, 50.0, 50.0, 60.0, 60.0 

# ARJV ([mu mol e- (mu mol CO2)-1]) :  a coefficient of the linear regression (a+bT) defining the Jmax25/Vcmax25 ratio          {OK_STOMATE}
ARJV =  -9999., 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 2.59, 1.715, 2.59, 1.715 

# BRJV ([(mu mol e- (mu mol CO2)-1) (°C)-1]) :  b coefficient of the linear regression (a+bT) defining the Jmax25/Vcmax25 ratio        {OK_STOMATE}
BRJV =  -9999., -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, -0.035, 0., -0.035, 0. 

# KmC25 ([ubar]) :  Michaelis–Menten constant of Rubisco for CO2 at 25°C     {}
KmC25 =  -9999., 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 404.9, 650., 404.9, 650. 

# KmO25 ([ubar]) :  Michaelis–Menten constant of Rubisco for O2 at 25°C      {}
KmO25 =  -9999., 278400., 278400., 278400., 278400., 278400., 278400., 278400., 278400., 278400., 450000., 278400., 450000. 

# Sco25 ([bar bar-1]) :  Relative CO2 /O2 specificity factor for Rubisco at 25°C     {}
Sco25 =  -9999., 2800., 2800., 2800., 2800., 2800., 2800., 2800., 2800., 2800., 2590., 2800., 2590. 

# gm25  ([mol m-2 s-1 bar-1] ) :  Mesophyll diffusion conductance at 25°C        { }
gm25  =  -9999., 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, 0.4, -9999., 0.4, -9999.  

# gamma_star25 ([ubar]) :  Ci-based CO2 compensation point in the absence of Rd at 25°C (ubar)         {}
gamma_star25 =  -9999., 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75, 42.75 

# a1 ([-]) :  Empirical factor involved in the calculation of fvpd      {}
a1 =  -9999., 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.85, 0.72, 0.85, 0.72 

# b1 ([-]) :  Empirical factor involved in the calculation of fvpd      {}
b1 =  -9999., 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.20, 0.14, 0.20 

# g0 ([mol m−2 s−1 bar−1]) :  Residual stomatal conductance when irradiance approaches zero       {}
g0 =  -9999., 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.00625, 0.01875, 0.00625, 0.01875  

# h_protons ([mol mol-1]) :  Number of protons required to produce one ATP      {}
h_protons =  -9999., 4., 4., 4., 4., 4., 4., 4., 4., 4., 4., 4., 4.  

# fpsir ([-]) :  Fraction of PSII e− transport rate partitioned to the C4 cycle       {}
fpsir =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.4, -9999., 0.4  

# fQ ([-]) :  Fraction of electrons at reduced plastoquinone that follow the Q-cycle    {}
fQ =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 1., -9999., 1. 

# fpseudo ([-]) :  Fraction of electrons at PSI that follow pseudocyclic transport      {}
fpseudo =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.1, -9999., 0.1 

# kp ([mol m−2 s−1 bar−1]) :  Initial carboxylation efficiency of the PEP carboxylase     {}
kp =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.7, -9999., 0.7 

# alpha ([-]) :  Fraction of PSII activity in the bundle sheath         {}
alpha =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.1, -9999., 0.1 

# gbs ([mol m−2 s−1 bar−1]) :  Bundle-sheath conductance  {}
gbs =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.003, -9999., 0.003 

# theta ([−]) :  Convexity factor for response of J to irradiance     {}
theta =  -9999., 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7, 0.7 

# alpha_LL ([mol e− (mol photon)−1]) :  Conversion efficiency of absorbed light into J at strictly limiting light   {}
alpha_LL =  -9999., 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372, 0.372 

# STRESS_VCMAX ([-]) :  Stress on vcmax         {OK_SECHIBA or OK_STOMATE}
STRESS_VCMAX =  1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 

# STRESS_GS ([-]) :  Stress on gs       {OK_SECHIBA or OK_STOMATE}
STRESS_GS =  1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 

# STRESS_GM ([-]) :  Stress on gm       {OK_SECHIBA or OK_STOMATE}
STRESS_GM =  1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 

# EXT_COEFF ([-]) :  extinction coefficient of the Monsi&Seaki relationship (1953)      {OK_SECHIBA or OK_STOMATE}
EXT_COEFF =  .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5 

# EXT_COEFF_VEGETFRAC ([-]) :  extinction coefficient used for the calculation of the bare soil fraction        {OK_SECHIBA or OK_STOMATE}
EXT_COEFF_VEGETFRAC =  1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 

# HYDROL_HUMCSTE ([m]) :  Root profile  {OK_SECHIBA}
HYDROL_HUMCSTE =  humcste_ref2m or humcste_ref4m depending on zmaxh 

# PREF_SOIL_VEG ([-]        ) :  The soil tile number for each vegetation       {OK_SECHIBA or OK_STOMATE}
PREF_SOIL_VEG =  1, 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3 

# RSTRUCT_CONST ([s/m]) :  Structural resistance        {OK_SECHIBA}
RSTRUCT_CONST =  0.0, 25.0, 25.0, 25.0, 25.0, 25.0, 25.0, 25.0, 25.0,  2.5,  2.0,  2.0,  2.0 

# KZERO ([kg/m^2/s]) :  A vegetation dependent constant used in the calculation of the surface resistance.      {OK_SECHIBA}
KZERO =  0.0, 12.E-5, 12.E-5, 12.e-5, 12.e-5, 25.e-5, 12.e-5,25.e-5, 25.e-5, 30.e-5, 30.e-5, 30.e-5, 30.e-5  

# RVEG_PFT ([-]) :  Artificial parameter to increase or decrease canopy resistance.     {OK_SECHIBA}
RVEG_PFT =  1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1. 

# WMAX_VEG ([kg/m^3]) :  Maximum field capacity for each of the vegetations (Temporary): max quantity of water  {OK_SECHIBA}
WMAX_VEG =  150., 150., 150., 150., 150., 150., 150.,150., 150., 150., 150., 150., 150. 

# PERCENT_THROUGHFALL_PFT ([%]) :  Percent by PFT of precip that is not intercepted by the canopy. Default value depend on run mode.    {OK_SECHIBA}
PERCENT_THROUGHFALL_PFT =  Case offline [0. 0. 0....] else [30. 30. 30.....] 

# SNOWA_AGED_VIS ([-]) :  Minimum snow albedo value for each vegetation type after aging (dirty old snow), visible albedo       {OK_SECHIBA}
SNOWA_AGED_VIS =  0.74, 0.0, 0.0, 0.08, 0.24, 0.07, 0.18, 0.18, 0.33, 0.57, 0.57, 0.57, 0.57 

# SNOWA_AGED_NIR ([-]) :  Minimum snow albedo value for each vegetation type after aging (dirty old snow), near infrared albedo         {OK_SECHIBA}
SNOWA_AGED_NIR =  0.50, 0.0, 0.0, 0.10, 0.37, 0.08, 0.16, 0.17, 0.27, 0.44, 0.44, 0.44, 0.44   

# SNOWA_DEC_VIS ([-]) :  Decay rate of snow albedo value for each vegetation type as it will be used in condveg_snow, visible albedo    {OK_SECHIBA}
SNOWA_DEC_VIS =  0.21, 0.0, 0.0, 0.14, 0.08, 0.17, 0.05, 0.06, 0.09, 0.15, 0.15, 0.15, 0.15  

# SNOWA_DEC_NIR ([-]) :  Decay rate of snow albedo value for each vegetation type as it will be used in condveg_snow, near infrared albedo      {OK_SECHIBA}
SNOWA_DEC_NIR =  0.13, 0.0, 0.0, 0.10, 0.10, 0.16, 0.04, 0.07, 0.08, 0.12, 0.12, 0.12, 0.12 

# ALB_LEAF_VIS ([-]) :  leaf albedo of vegetation type, visible albedo  {OK_SECHIBA}
ALB_LEAF_VIS =  0.00, 0.04, 0.04, 0.04, 0.04, 0.03, 0.03, 0.03, 0.03, 0.06, 0.06, 0.06, 0.06 

# ALB_LEAF_NIR ([-]) :  leaf albedo of vegetation type, near infrared albedo    {OK_SECHIBA}
ALB_LEAF_NIR =  0.00, 0.23, 0.18, 0.18, 0.20, 0.24, 0.15, 0.26, 0.20, 0.24, 0.27, 0.28, 0.26 

# ISO_ACTIVITY ([-]) :  Biogenic activity for each age class : isoprene         {CHEMISTRY_BVOC}
ISO_ACTIVITY =  0.5, 1.5, 1.5, 0.5 

# METHANOL_ACTIVITY ([-]) :  Isoprene emission factor for each age class : methanol     {CHEMISTRY_BVOC}
METHANOL_ACTIVITY =  1., 1., 0.5, 0.5 

# EM_FACTOR_ISOPRENE ([ugC/g/h] ) :  Isoprene emission factor   {CHEMISTRY_BVOC}
EM_FACTOR_ISOPRENE =  0., 24., 24., 8., 16., 45., 8., 18., 0.5, 12., 18., 5., 5. 

# EM_FACTOR_MONOTERPENE ([ugC/g/h] ) :  Monoterpene emission factor     {CHEMISTRY_BVOC }
EM_FACTOR_MONOTERPENE =  0., 2.0, 2.0, 1.8, 1.4, 1.6, 1.8, 1.4, 1.8, 0.8, 0.8,  0.22, 0.22 

# C_LDF_MONO  ([]) :  Monoterpenes fraction dependancy to light         {CHEMISTRY_BVOC}
C_LDF_MONO  =  0.6 

# C_LDF_SESQ  ([]) :  Sesquiterpenes fraction dependancy to light       {CHEMISTRY_BVOC}
C_LDF_SESQ  =  0.5 

# C_LDF_METH  ([]) :  Methanol fraction dependancy to light     {CHEMISTRY_BVOC}
C_LDF_METH  =  0.8 

# C_LDF_ACET  ([]) :  Acetone fraction dependancy to light      {CHEMISTRY_BVOC}
C_LDF_ACET  =  0.2 

# EM_FACTOR_APINENE  ([ugC/g/h] ) :  Alfa pinene  emission factor       {CHEMISTRY_BVOC }
EM_FACTOR_APINENE  =  0., 1.35, 1.35, 0.85, 0.95, 0.75, 0.85, 0.60, 1.98, 0.30, 0.30, 0.09, 0.09 

# EM_FACTOR_BPINENE ([ugC/g/h] ) :  Beta pinene  emission factor        {CHEMISTRY_BVOC }
EM_FACTOR_BPINENE =  0., 0.30, 0.30, 0.35, 0.25, 0.20, 0.35, 0.12, 0.45, 0.16, 0.12, 0.05, 0.05 

# EM_FACTOR_LIMONENE ([ugC/g/h] ) :  Limonene  emission factor  {CHEMISTRY_BVOC}
EM_FACTOR_LIMONENE =  0., 0.25, 0.25, 0.20, 0.25, 0.14, 0.20, 0.135, 0.11, 0.19, 0.42, 0.03, 0.03 

# EM_FACTOR_MYRCENE ([ugC/g/h] ) :  Myrcene  emission factor    {CHEMISTRY_BVOC}
EM_FACTOR_MYRCENE =  0., 0.20, 0.20, 0.12, 0.11, 0.065, 0.12, 0.036, 0.075, 0.08,  0.085, 0.015, 0.015 

# EM_FACTOR_SABINENE ([ugC/g/h] ) :  Sabinene  emission factor  {CHEMISTRY_BVOC}
EM_FACTOR_SABINENE =  0., 0.20, 0.20, 0.12, 0.17, 0.70, 0.12, 0.50, 0.09, 0.085, 0.075, 0.02, 0.02 

# EM_FACTOR_CAMPHENE  ([ugC/g/h] ) :  Camphene  emission factor         {CHEMISTRY_BVOC}
EM_FACTOR_CAMPHENE  =  0., 0.15, 0.15, 0.10, 0.10, 0.01, 0.10, 0.01, 0.07, 0.07, 0.08, 0.01, 0.01 

# EM_FACTOR_3CARENE  ([ugC/g/h] ) :  3-Carene  emission factor  {CHEMISTRY_BVOC}
EM_FACTOR_3CARENE  =  0., 0.13, 0.13, 0.42, 0.02, 0.055, 0.42,0.025, 0.125, 0.085, 0.085, 0.065, 0.065 

# EM_FACTOR_TBOCIMENE ([ugC/g/h] ) :  T-beta-ocimene  emission factor   {CHEMISTRY_BVOC}
EM_FACTOR_TBOCIMENE =  0., 0.25, 0.25, 0.13, 0.09, 0.26, 0.13, 0.20, 0.085, 0.18, 0.18, 0.01, 0.01 

# EM_FACTOR_OTHERMONOT ([ugC/g/h] ) :  Other monoterpenes  emission factor      {CHEMISTRY_BVOC}
EM_FACTOR_OTHERMONOT =  0., 0.17, 0.17, 0.11, 0.11, 0.125, 0.11, 0.274, 0.01, 0.15, 0.155, 0.035, 0.035 

# EM_FACTOR_SESQUITERP  ([ugC/g/h] ) :  Sesquiterpenes  emission factor         {CHEMISTRY_BVOC}
EM_FACTOR_SESQUITERP  =  0., 0.45, 0.45, 0.13, 0.3, 0.36, 0.15, 0.3, 0.25, 0.6, 0.6, 0.08, 0.08 

# C_BETA_MONO  ([]) :  Monoterpenes temperature dependency coefficient  {CHEMISTRY_BVOC}
C_BETA_MONO  =  0.1 

# C_BETA_SESQ  ([]) :  Sesquiterpenes temperature dependency coefficient        {CHEMISTRY_BVOC}
C_BETA_SESQ  =  0.17 

# C_BETA_METH  ([]) :  Methanol temperature dependency coefficient      {CHEMISTRY_BVOC}
C_BETA_METH  =  0.08 

# C_BETA_ACET  ([]) :  Acetone temperature dependency coefficient       {CHEMISTRY_BVOC}
C_BETA_ACET  =  0.1 

# C_BETA_OXYVOC  ([]) :  Other oxygenated BVOC temperature dependency coefficient       {CHEMISTRY_BVOC}
C_BETA_OXYVOC  =  0.13 

# EM_FACTOR_ORVOC ([ugC/g/h]  ) :  ORVOC emissions factor       {CHEMISTRY_BVOC }
EM_FACTOR_ORVOC =  0., 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5 

# EM_FACTOR_OVOC ([ugC/g/h]        ) :  OVOC emissions factor   {CHEMISTRY_BVOC}
EM_FACTOR_OVOC =  0., 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5, 1.5 

# EM_FACTOR_MBO ([ugC/g/h]  ) :  MBO emissions factor   {CHEMISTRY_BVOC }
EM_FACTOR_MBO =  0., 2.e-5, 2.e-5, 1.4, 2.e-5, 2.e-5, 0.14, 2.e-5, 2.e-5, 2.e-5, 2.e-5, 2.e-5, 2.e-5 

# EM_FACTOR_METHANOL ([ugC/g/h]  ) :  Methanol emissions factor         {CHEMISTRY_BVOC }
EM_FACTOR_METHANOL =  0., 0.8, 0.8, 1.8, 0.9, 1.9, 1.8, 1.8, 1.8, 0.7, 0.9, 2., 2. 

# EM_FACTOR_ACETONE ([ugC/g/h]     ) :  Acetone emissions factor        {CHEMISTRY_BVOC }
EM_FACTOR_ACETONE =  0., 0.25, 0.25, 0.3, 0.2, 0.33, 0.3, 0.25, 0.25, 0.2, 0.2, 0.08, 0.08 

# EM_FACTOR_ACETAL ([ugC/g/h]  ) :  Acetaldehyde emissions factor       {CHEMISTRY_BVOC}
EM_FACTOR_ACETAL =  0., 0.2, 0.2, 0.2, 0.2, 0.25, 0.25, 0.16, 0.16, 0.12, 0.12, 0.035, 0.02 

# EM_FACTOR_FORMAL ([ugC/g/h]  ) :  Formaldehyde emissions factor       {CHEMISTRY_BVOC }
EM_FACTOR_FORMAL =  0., 0.04, 0.04, 0.08, 0.04, 0.04, 0.04, 0.04, 0.04, 0.025, 0.025, 0.013, 0.013 

# EM_FACTOR_ACETIC ([ugC/g/h]  ) :  Acetic Acid emissions factor        {CHEMISTRY_BVOC }
EM_FACTOR_ACETIC =  0., 0.025, 0.025,0.025,0.022,0.08,0.025,0.022,0.013,0.012,0.012,0.008,0.008 

# EM_FACTOR_FORMIC ([ugC/g/h]  ) :  Formic Acid emissions factor        {CHEMISTRY_BVOC}
EM_FACTOR_FORMIC =  0., 0.015, 0.015, 0.02, 0.02, 0.025, 0.025, 0.015, 0.015,0.010,0.010,0.008,0.008 

# EM_FACTOR_NO_WET ([ngN/m^2/s]) :  NOx emissions factor wet soil emissions and exponential dependancy factor   {CHEMISTRY_BVOC}
EM_FACTOR_NO_WET =  0., 2.6, 0.06, 0.03, 0.03, 0.03, 0.03, 0.03, 0.03, 0.36, 0.36, 0.36, 0.36 

# EM_FACTOR_NO_DRY ([ngN/m^2/s] ) :  NOx emissions factor dry soil emissions and exponential dependancy factor          {CHEMISTRY_BVOC}
EM_FACTOR_NO_DRY =  0., 8.60, 0.40, 0.22, 0.22, 0.22, 0.22, 0.22, 0.22, 2.65, 2.65, 2.65, 2.65 

# LARCH ([-]  ) :  Larcher 1991 SAI/LAI ratio   {CHEMISTRY_BVOC }
LARCH =  0., 0.015, 0.015, 0.003, 0.005, 0.005, 0.003, 0.005, 0.003, 0.005, 0.005, 0.008, 0.008 

# SLA ([m^2/gC]) :  specif leaf area    {OK_STOMATE}
SLA =  1.5E-2, 1.53E-2, 2.6E-2, 9.26E-3, 2E-2, 2.6E-2, 9.26E-3, 2.6E-2, 1.9E-2, 2.6E-2, 2.6E-2, 2.6E-2, 2.6E-2 

# AVAILABILITY_FACT  ([-]   ) :  Calculate dynamic mortality in lpj_gap, pft dependent parameter        {OK_STOMATE }
AVAILABILITY_FACT  =  -9999., 0.14, 0.14, 0.10, 0.10, 0.10, 0.05, 0.05, 0.05, -9999., -9999., -9999., -9999.  

# R0  ([-]    ) :  Standard root allocation     {OK_STOMATE }
R0  =  -9999., .30, .30, .30, .30, .30, .30, .30, .30, .30, .30, .30, .30 

# S0  ([-]    ) :  Standard sapwood allocation          {OK_STOMATE }
S0  =  -9999., .25, .25, .30, .30, .30, .30, .30, .30, .30, .30, .30, .30 

# FRAC_GROWTHRESP ([-]) :  fraction of GPP which is lost as growth respiration  {OK_STOMATE}
FRAC_GROWTHRESP =  -9999., 0.35, 0.35, 0.28, 0.28, 0.28, 0.35, 0.35, 0.35, 0.28, 0.28, 0.28, 0.28 

# MAINT_RESP_SLOPE_C ([-]) :  slope of maintenance respiration coefficient (1/K), constant c of aT^2+bT+c , tabulated   {OK_STOMATE}
MAINT_RESP_SLOPE_C =  -9999., 0.12, 0.12, 0.16, 0.16, 0.16, 0.25, 0.25, 0.25, 0.16, 0.12, 0.16, 0.12 

# MAINT_RESP_SLOPE_B ([-]) :  slope of maintenance respiration coefficient (1/K), constant b of aT^2+bT+c , tabulated   {OK_STOMATE}
MAINT_RESP_SLOPE_B =  -9999., .0, .0, .0, .0, .0, .0, .0, .0, -.00133, .0, -.00133, .0  

# MAINT_RESP_SLOPE_A ([-]) :  slope of maintenance respiration coefficient (1/K), constant a of aT^2+bT+c , tabulated   {OK_STOMATE}
MAINT_RESP_SLOPE_A =  -9999., .0, .0, .0, .0, .0, .0, .0, .0, .0, .0, .0, .0     

# CM_ZERO_LEAF ([g/g/day]) :  maintenance respiration coefficient at 0 deg C, for leaves, tabulated     {OK_STOMATE}
CM_ZERO_LEAF =  -9999., 2.35E-3, 2.62E-3, 1.01E-3, 2.35E-3, 2.62E-3, 1.01E-3,2.62E-3, 2.05E-3, 2.62E-3, 2.62E-3, 2.62E-3, 2.62E-3 

# CM_ZERO_SAPABOVE ([g/g/day]) :  maintenance respiration coefficient at 0 deg C,for sapwood above, tabulated   {OK_STOMATE}
CM_ZERO_SAPABOVE =  -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4 

# CM_ZERO_SAPBELOW ([g/g/day]) :  maintenance respiration coefficient at 0 deg C, for sapwood below, tabulated  {OK_STOMATE}
CM_ZERO_SAPBELOW =  -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4  

# CM_ZERO_HEARTABOVE ([g/g/day]) :  maintenance respiration coefficient at 0 deg C, for heartwood above, tabulated      {OK_STOMATE }
CM_ZERO_HEARTABOVE =  -9999., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.  

# CM_ZERO_HEARTBELOW ([g/g/day] ) :  maintenance respiration coefficient at 0 deg C,for heartwood below, tabulated      {OK_STOMATE }
CM_ZERO_HEARTBELOW =  -9999., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0.  

# CM_ZERO_ROOT ([g/g/day] ) :  maintenance respiration coefficient at 0 deg C, for roots, tabulated     {OK_STOMATE}
CM_ZERO_ROOT =  -9999.,1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3,1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3, 1.67E-3 

# CM_ZERO_FRUIT ([g/g/day] ) :  maintenance respiration coefficient at 0 deg C, for fruits, tabulated   {OK_STOMATE}
CM_ZERO_FRUIT =  -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4,1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4     

# CM_ZERO_CARBRES ([g/g/day] ) :  maintenance respiration coefficient at 0 deg C, for carbohydrate reserve, tabulated   {OK_STOMATE}
CM_ZERO_CARBRES =  -9999., 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4,1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4, 1.19E-4 

# FLAM ([-]) :  flamability: critical fraction of water holding capacity        {OK_STOMATE}
FLAM =  -9999., .15, .25, .25, .25, .25, .25, .25, .25, .25, .25, .35, .35 

# RESIST ([-]) :  fire resistance       {OK_STOMATE}
RESIST =  -9999., .95, .90, .12, .50, .12, .12, .12, .12, .0, .0, .0, .0  

# COEFF_LCCHANGE_1 ([-]) :  Coeff of biomass export for the year        {OK_STOMATE}
COEFF_LCCHANGE_1 =  -9999., 0.897, 0.897, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597, 0.597  

# COEFF_LCCHANGE_10 ([-]) :  Coeff of biomass export for the decade     {OK_STOMATE}
COEFF_LCCHANGE_10 =  -9999., 0.103, 0.103, 0.299, 0.299, 0.299, 0.299, 0.299, 0.299, 0.299, 0.403, 0.299, 0.403 

# COEFF_LCCHANGE_100 ([-]) :  Coeff of biomass export for the century   {OK_STOMATE}
COEFF_LCCHANGE_100 =  -9999., 0., 0., 0.104, 0.104, 0.104, 0.104, 0.104, 0.104, 0.104, 0., 0.104, 0. 

# LAI_MAX_TO_HAPPY ([-]) :  threshold of LAI below which plant uses carbohydrate reserves       {OK_STOMATE}
LAI_MAX_TO_HAPPY =  -9999., .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5, .5  

# LAI_MAX ([m^2/m^2]) :  maximum LAI, PFT-specific      {OK_STOMATE}
LAI_MAX =  -9999., 7.0, 5.0, 5.0, 4.0, 5.0, 3.5, 4.0, 3.0, 2.5, 2.0, 5.0, 5.0 

# PHENO_TYPE ([-]) :  type of phenology, 0      {OK_STOMATE}
PHENO_TYPE =  0, 1, 3, 1, 1, 2, 1, 2, 2, 4, 4, 2, 3 

# PHENO_GDD_CRIT_C ([-]) :  critical gdd, tabulated (C), constant c of aT^2+bT+c        {OK_STOMATE}
PHENO_GDD_CRIT_C =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 270., 400., 125., 400. 

# PHENO_GDD_CRIT_B ([-]) :  critical gdd, tabulated (C), constant b of aT^2+bT+c        {OK_STOMATE}
PHENO_GDD_CRIT_B =  -9999., -9999., -9999., -9999., -9999., -9999., -9999.,-9999., -9999., 6.25, 0., 0., 0. 

# PHENO_GDD_CRIT_A ([-]) :  critical gdd, tabulated (C), constant a of aT^2+bT+c        {OK_STOMATE}
PHENO_GDD_CRIT_A =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0.03125,  0., 0., 0. 

# PHENO_MOIGDD_T_CRIT ([C]) :  Average temperature threashold for C4 grass used in pheno_moigdd         {OK_STOMATE}
PHENO_MOIGDD_T_CRIT =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 22.0, -9999., -9999. 

# NGD_CRIT ([days]) :  critical ngd, tabulated. Threshold -5 degrees    {OK_STOMATE}
NGD_CRIT =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., 0., -9999., -9999., -9999., -9999., -9999. 

# NCDGDD_TEMP ([C] ) :  critical temperature for the ncd vs. gdd function in phenology  {OK_STOMATE}
NCDGDD_TEMP =  -9999., -9999., -9999., -9999., -9999., 5., -9999., 0., -9999., -9999., -9999., -9999., -9999. 

# HUM_FRAC ([%]) :  critical humidity (relative to min/max) for phenology       {OK_STOMATE}
HUM_FRAC =  -9999., -9999., .5, -9999., -9999., -9999., -9999., -9999.,  -9999., .5, .5, .5,.5      

# HUM_MIN_TIME ([days]) :  minimum time elapsed since moisture minimum  {OK_STOMATE}
HUM_MIN_TIME =  -9999., -9999., 50., -9999., -9999., -9999., -9999., -9999., -9999., 35., 35., 75., 75. 

# TAU_SAP ([days]) :  sapwood -> heartwood conversion time      {OK_STOMATE}
TAU_SAP =  -9999., 730., 730., 730., 730., 730., 730., 730., 730., -9999., -9999., -9999., -9999. 

# TAU_LEAFINIT ([days]) :  time to attain the initial foliage using the carbohydrate reserve    {OK_STOMATE}
TAU_LEAFINIT =  -9999., 10., 10., 10., 10., 10., 10., 10., 10., 10., 10., 10., 10. 

# TAU_FRUIT ([days]) :  fruit lifetime  {OK_STOMATE}
TAU_FRUIT =  -9999., 90., 90., 90., 90., 90., 90., 90., 90., -9999., -9999., -9999., -9999. 

# ECUREUIL ([-]) :  fraction of primary leaf and root allocation put into reserve       {OK_STOMATE}
ECUREUIL =  -9999., .0, 1., .0, .0, 1., .0, 1., 1., 1., 1., 1., 1. 

# ALLOC_MIN ([-]) :  minimum allocation above/below     {OK_STOMATE}
ALLOC_MIN =  -9999., 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, -9999., -9999., -9999., -9999.  

# ALLOC_MAX ([-]) :  maximum allocation above/below     {OK_STOMATE}
ALLOC_MAX =  -9999., 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, 0.8, -9999., -9999., -9999., -9999. 

# DEMI_ALLOC  ([-]) :  mean allocation above/below      {OK_STOMATE}
DEMI_ALLOC  =  -9999., 5., 5., 5., 5., 5., 5., 5., 5., -9999., -9999., -9999., -9999. 

# LEAFLIFE_TAB ([years]) :  leaf longevity      {OK_STOMATE}
LEAFLIFE_TAB =  -9999., .5, 2., .33, 1., 2., .33, 2., 2., 2., 2., 2., 2.  

# LEAFFALL ([days]) :  length of death of leaves, tabulated     {OK_STOMATE}
LEAFFALL =  -9999., -9999., 10., -9999., -9999., 10., -9999., 10., 10., 10., 10., 10., 10.  

# LEAFAGECRIT ([days]) :  critical leaf age, tabulated  {OK_STOMATE}
LEAFAGECRIT =  -9999., 730., 180., 910., 730., 180., 910., 180., 180., 120., 120., 90., 90.   

# SENESCENCE_TYPE ([-]) :  type of senescence, tabulated        {OK_STOMATE}
SENESCENCE_TYPE =  none, none, dry, none, none, cold, none, cold, cold, mixed, mixed, mixed, mixed  

# SENESCENCE_HUM ([-] ) :  critical relative moisture availability for senescence       {OK_STOMATE}
SENESCENCE_HUM =  -9999., -9999., .3, -9999., -9999., -9999., -9999., -9999., -9999., .2, .2, .3, .2  

# NOSENESCENCE_HUM ([-]) :  relative moisture availability above which there is no humidity-related senescence  {OK_STOMATE}
NOSENESCENCE_HUM =  -9999., -9999., .8, -9999., -9999., -9999., -9999., -9999., -9999., .3, .3, .3, .3  

# MAX_TURNOVER_TIME ([days]) :  maximum turnover time for grasse        {OK_STOMATE}
MAX_TURNOVER_TIME =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999.,  80.,  80., 80., 80.  

# MIN_TURNOVER_TIME ([days]) :  minimum turnover time for grasse        {OK_STOMATE}
MIN_TURNOVER_TIME =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 10., 10., 10., 10.  

# MIN_LEAF_AGE_FOR_SENESCENCE ([days] ) :  minimum leaf age to allow senescence g       {OK_STOMATE}
MIN_LEAF_AGE_FOR_SENESCENCE =  -9999., -9999., 90., -9999., -9999., 90., -9999., 60., 60., 30., 30., 30., 30. 

# SENESCENCE_TEMP_C ([-]) :  critical temperature for senescence (C), constant c of aT^2+bT+c, tabulated        {OK_STOMATE}
SENESCENCE_TEMP_C =  -9999., -9999., -9999., -9999., -9999., 12., -9999., 7., 2., -1.375, 5., 5., 10. 

# SENESCENCE_TEMP_B ([-]) :  critical temperature for senescence (C), constant b of aT^2+bT+c ,tabulated        {OK_STOMATE }
SENESCENCE_TEMP_B =  -9999., -9999., -9999., -9999., -9999., 0., -9999., 0., 0., .1, 0., 0., 0. 

# SENESCENCE_TEMP_A ([-] ) :  critical temperature for senescence (C), constant a of aT^2+bT+c , tabulated      {OK_STOMATE}
SENESCENCE_TEMP_A =  -9999., -9999., -9999., -9999., -9999., 0., -9999., 0., 0.,.00375, 0., 0., 0.  

# GDD_SENESCENCE ([days] ) :  minimum gdd to allow senescence of crops          {OK_STOMATE}
GDD_SENESCENCE =  -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., -9999., 950., 4000. 

# ALWAYS_INIT ([BOOLEAN]) :  Take carbon from atmosphere if carbohydrate reserve too small      {OK_STOMATE}
ALWAYS_INIT =  y, y, y, y, y, y, y, y, y, y, n, y, y 

# RESIDENCE_TIME ([years]) :  residence time of trees   {OK_DGVM and NOT(LPJ_GAP_CONST_MORT)}
RESIDENCE_TIME =  -9999., 30.0, 30.0, 40.0, 40.0, 40.0, 80.0, 80.0, 80.0, 0.0, 0.0, 0.0, 0.0  

# TMIN_CRIT ([C]) :  critical tmin, tabulated   {OK_STOMATE}
TMIN_CRIT =  -9999.,  0.0, 0.0, -30.0, -14.0, -30.0, -45.0, -45.0, -9999., -9999., -9999., -9999., -9999. 

# TCM_CRIT ([C]) :  critical tcm, tabulated     {OK_STOMATE}
TCM_CRIT =  -9999., -9999., -9999., 5.0, 15.5, 15.5, -8.0, -8.0, -8.0, -9999., -9999., -9999., -9999. 

# HERBIVORES ([FLAG]) :  herbivores allowed?    {OK_STOMATE }
HERBIVORES =  n 

# TREAT_EXPANSION ([FLAG]) :  treat expansion of PFTs across a grid cell?       {OK_STOMATE }
TREAT_EXPANSION =  n 

# LPJ_GAP_CONST_MORT ([FLAG]) :  Constant mortality     {OK_STOMATE AND NOT OK_DGVM}
LPJ_GAP_CONST_MORT =  y/n depending on OK_DGVM 

# HARVEST_AGRI ([FLAG]) :  Harvest model for agricultural PFTs.         {OK_STOMATE }
HARVEST_AGRI =  y 

# FIRE_DISABLE ([FLAG]) :  no fire allowed      {OK_STOMATE }
FIRE_DISABLE =  y 

# SPINUP_ANALYTIC (BOOLEAN    ) :  Activation of the analytic resolution of the spinup.         {OK_STOMATE}
SPINUP_ANALYTIC =  n 

# AGRICULTURE ([FLAG]) :  agriculture allowed?  {OK_SECHIBA or OK_STOMATE}
AGRICULTURE =  y 

# IMPOSE_VEG ([FLAG]) :  Should the vegetation be prescribed ?  {OK_SECHIBA or OK_STOMATE}
IMPOSE_VEG =  n 

# IMPOSE_SOILT ([FLAG]) :  Should the soil type be prescribed ?         {IMPOSE_VEG}
IMPOSE_SOILT =  n 

# LAI_MAP ([FLAG]) :  Read the LAI map  {OK_SECHIBA or OK_STOMATE}
LAI_MAP =  n 

# VEGET_REINIT ([FLAG] ) :  Reset veget_year counter (obsolet)  {VEGET_UPDATE > 0Y}
VEGET_REINIT =  y 

# VEGETMAP_RESET ([FLAG] ) :  Flag to change vegetation map without activating LAND USE change for carbon fluxes and reset carbon related variables to zero     {}
VEGETMAP_RESET =  n 

# VEGET_YEAR ([FLAG] ) :  Year of the vegetation map to be read         {}
VEGET_YEAR =  1 

# MAXMASS_SNOW ([kg/m^2]  ) :  The maximum mass of a snow       {OK_SECHIBA}
MAXMASS_SNOW =  3000. 

# SNOWCRI ([kg/m^2]  ) :  Sets the amount above which only sublimation occures          {OK_SECHIBA}
SNOWCRI =  1.5 

# MIN_WIND ([m/s]) :  Minimum wind speed        {OK_SECHIBA}
MIN_WIND =  0.1 

# MAX_SNOW_AGE ([days?]) :  Maximum period of snow aging        {OK_SECHIBA}
MAX_SNOW_AGE =  50. 

# SNOW_TRANS ([m]   ) :  Transformation time constant for snow  {OK_SECHIBA}
SNOW_TRANS =  0.2 

# OK_NUDGE_MC ([FLAG]) :  Activate nudging of soil moisture     {}
OK_NUDGE_MC =  n 

# NUDGE_TAU_MC ([-]) :  Relaxation time for nudging of soil moisture expressed in fraction of the day   {OK_NUDGE_MC}
NUDGE_TAU_MC =  1 

# OK_NUDGE_SNOW ([FLAG]) :  Activate nudging of snow variables  {}
OK_NUDGE_SNOW =  n 

# NUDGE_TAU_SNOW ([-]) :  Relaxation time for nudging of snow variables         {OK_NUDGE_SNOW}
NUDGE_TAU_SNOW =  1 

# NUDGE_INTERPOL_WITH_XIOS ([FLAG]) :  Activate reading and interpolation with XIOS for nudging fields  {OK_NUDGE_MC or OK_NUDGE_SNOW}
NUDGE_INTERPOL_WITH_XIOS =  n 

# HEIGHT_DISPLACEMENT ([m]  ) :  Magic number which relates the height to the displacement height.      {OK_SECHIBA }
HEIGHT_DISPLACEMENT =  0.75 

# Z0_BARE ([m]   ) :  bare soil roughness length        {OK_SECHIBA }
Z0_BARE =  0.01  

# Z0_ICE ([m]   ) :  ice roughness length       {OK_SECHIBA }
Z0_ICE =  0.001 

# TCST_SNOWA ([days]) :  Time constant of the albedo decay of snow      {OK_SECHIBA }
TCST_SNOWA =  10.0  

# SNOWCRI_ALB ([cm]  ) :  Critical value for computation of snow albedo         {OK_SECHIBA}
SNOWCRI_ALB =  10.  

# VIS_DRY ([-]  ) :  The correspondance table for the soil color numbers and their albedo       {OK_SECHIBA }
VIS_DRY =  0.24, 0.22, 0.20, 0.18, 0.16, 0.14, 0.12, 0.10, 0.27 

# NIR_DRY ([-]   ) :  The correspondance table for the soil color numbers and their albedo      {OK_SECHIBA }
NIR_DRY =  0.48, 0.44, 0.40, 0.36, 0.32, 0.28, 0.24, 0.20, 0.55 

# VIS_WET  ([-]   ) :  The correspondance table for the soil color numbers and their albedo     {OK_SECHIBA  }
VIS_WET  =  0.12, 0.11, 0.10, 0.09, 0.08, 0.07, 0.06, 0.05, 0.15 

# NIR_WET ([-]    ) :  The correspondance table for the soil color numbers and their albedo     {OK_SECHIBA }
NIR_WET =  0.24, 0.22, 0.20, 0.18, 0.16, 0.14, 0.12, 0.10, 0.31 

# ALBSOIL_VIS ([-]  ) :         {OK_SECHIBA }
ALBSOIL_VIS =  0.18, 0.16, 0.16, 0.15, 0.12, 0.105, 0.09, 0.075, 0.25 

# ALBSOIL_NIR  ([-]  ) :        {OK_SECHIBA }
ALBSOIL_NIR  =  0.36, 0.34, 0.34, 0.33, 0.30, 0.25, 0.20, 0.15, 0.45 

# ALB_DEADLEAF  ([-]     ) :  albedo of dead leaves, VIS+NIR    {OK_SECHIBA }
ALB_DEADLEAF  =  0.12, 0.35 

# ALB_ICE ([-]  ) :  albedo of ice, VIS+NIR     {OK_SECHIBA}
ALB_ICE =  0.60, 0.20 

# CONDVEG_SNOWA ([-]) :  The snow albedo used by SECHIBA        {OK_SECHIBA}
CONDVEG_SNOWA =  1.E+20 

# ALB_BARE_MODEL ([FLAG]) :  Switch bare soil albedo dependent (if TRUE) on soil wetness        {OK_SECHIBA}
ALB_BARE_MODEL =  n 

# ALB_BG_MODIS ([FLAG]) :  Read bare soil albedo from file with background MODIS data   {OK_SECHIBA}
ALB_BG_MODIS =  y 

# IMPOSE_AZE ([FLAG]) :  Should the surface parameters be prescribed    {OK_SECHIBA}
IMPOSE_AZE =  n 

# CONDVEG_Z0 ([m]) :  Surface roughness         {IMPOSE_AZE}
CONDVEG_Z0 =  0.15 

# ROUGHHEIGHT ([m] ) :  Height to be added to the height of the first level     {IMPOSE_AZE}
ROUGHHEIGHT =  0.0 

# CONDVEG_ALBVIS ([-]) :  SW visible albedo for the surface     {IMPOSE_AZE}
CONDVEG_ALBVIS =  0.25 

# CONDVEG_ALBNIR ([-]  ) :  SW near infrared albedo for the surface     {IMPOSE_AZE}
CONDVEG_ALBNIR =  0.25 

# CONDVEG_EMIS ([-] ) :  Emissivity of the surface for LW radiation     {IMPOSE_AZE}
CONDVEG_EMIS =  1.0 

# ROUGH_DYN ([FLAG]) :  Account for a dynamic roughness height  {OK_SECHIBA}
ROUGH_DYN =  y 

# C1 ([-] ) :  Constant used in the formulation of the ratio of         {ROUGH_DYN}
C1 =  0.32 

# C2 ([-] ) :  Constant used in the formulation of the ratio of         {ROUGH_DYN}
C2 =  0.264 

# C3 ([-] ) :  Constant used in the formulation of the ratio of         {ROUGH_DYN}
C3 =  15.1 

# Cdrag_foliage ([-] ) :  Drag coefficient of the foliage       {ROUGH_DYN}
Cdrag_foliage =  0.2 

# Ct ([-] ) :  Heat transfer coefficient of the leaf    {ROUGH_DYN}
Ct =  0.01 

# Prandtl ([-] ) :  Prandtl number used in the calculation of Ct*       {ROUGH_DYN}
Prandtl =  0.71 

# xansmax  ([-] ) :  maximum snow albedo        {OK_SECHIBA}
xansmax  =  0.85 

# xansmin  ([-] ) :  minimum snow albedo        {OK_SECHIBA}
xansmin  =  0.50 

# xans_todry  ([S-1] ) :  albedo decay rate for the dry snow    {OK_SECHIBA}
xans_todry  =  0.008 

# xans_t  ([S-1] ) :  albedo decay rate for the wet snow        {OK_SECHIBA}
xans_t  =  0.24 

# xrhosmax  ([-] ) :  maximum snow density      {OK_SECHIBA}
xrhosmax  =  750 

# xwsnowholdmax1 ([-] ) :  snow holding capacity 1      {OK_SECHIBA}
xwsnowholdmax1 =  0.03 

# xwsnowholdmax2 ([-] ) :  snow holding capacity 2      {OK_SECHIBA}
xwsnowholdmax2 =  0.10 

# xsnowrhohold  ([kg/m3] ) :  snow density      {OK_SECHIBA}
xsnowrhohold  =  200.0 

# ZSNOWTHRMCOND1 ([W/m/K] ) :  Thermal conductivity Coef 1      {OK_SECHIBA}
ZSNOWTHRMCOND1 =  0.02  

# ZSNOWTHRMCOND2 ([W m5/(kg2 K)] ) :  Thermal conductivity Coef 2       {OK_SECHIBA}
ZSNOWTHRMCOND2 =  2.5E-6 

# ZSNOWTHRMCOND_AVAP ([W/m/K] ) :  Thermal conductivity Coef 1 water vapor      {OK_SECHIBA}
ZSNOWTHRMCOND_AVAP =  -0.06023 

# ZSNOWTHRMCOND_BVAP ([W/m] ) :  Thermal conductivity Coef 2 water vapor        {OK_SECHIBA}
ZSNOWTHRMCOND_BVAP =  -2.5425 

# ZSNOWTHRMCOND_CVAP ([K] ) :  Thermal conductivity Coef 3 water vapor  {OK_SECHIBA}
ZSNOWTHRMCOND_CVAP =  -289.99 

# ZSNOWCMPCT_RHOD ([kg/m3]) :  Snow compaction coefficent       {OK_SECHIBA}
ZSNOWCMPCT_RHOD =  150.0 

# ZSNOWCMPCT_ACM ([1/s]) :  Coefficent for the thermal conductivity     {OK_SECHIBA}
ZSNOWCMPCT_ACM =  2.8e-6 

# ZSNOWCMPCT_BCM ([1/K]) :  Coefficent for the thermal conductivity     {OK_SECHIBA}
ZSNOWCMPCT_BCM =  0.04 

# ZSNOWCMPCT_CCM ([m3/kg] ) :  Coefficent for the thermal conductivity  {OK_SECHIBA}
ZSNOWCMPCT_CCM =  460. 

# ZSNOWCMPCT_V0 ([Pa/s]) :  Vapor coefficent for the thermal conductivity       {OK_SECHIBA}
ZSNOWCMPCT_V0 =  3.7e7 

# ZSNOWCMPCT_VT ([1/K]) :  Vapor coefficent for the thermal conductivity        {OK_SECHIBA}
ZSNOWCMPCT_VT =  0.081 

# ZSNOWCMPCT_VR ([m3/kg]) :  Vapor coefficent for the thermal conductivity      {OK_SECHIBA}
ZSNOWCMPCT_VR =  0.018 

# CB ([-] ) :  Constant of the Louis scheme     {OK_SECHIBA}
CB =  5.0 

# CC ([-] ) :  Constant of the Louis scheme     {OK_SECHIBA}
CC =  5.0 

# CD ([-] ) :  Constant of the Louis scheme     {OK_SECHIBA}
CD =  5.0 

# RAYT_CSTE ([W.m^{-2}] ) :  Constant in the computation of surface resistance          {OK_SECHIBA}
RAYT_CSTE =  125 

# DEFC_PLUS ([K.W^{-1}] ) :  Constant in the computation of surface resistance          {OK_SECHIBA}
DEFC_PLUS =  23.E-3 

# DEFC_MULT ([K.W^{-1}] ) :  Constant in the computation of surface resistance          {OK_SECHIBA}
DEFC_MULT =  1.5 

# NLAI ([-]  ) :  Number of LAI levels  {OK_SECHIBA}
NLAI =  20 

# LAIMAX ([m^2/m^2]   ) :  Maximum LAI  {OK_SECHIBA}
LAIMAX =   

# DEW_VEG_POLY_COEFF ([-]   ) :  coefficients of the polynome of degree 5 for the dew   {OK_SECHIBA}
DEW_VEG_POLY_COEFF =  0.887773, 0.205673, 0.110112, 0.014843, 0.000824, 0.000017  

# DOWNREGULATION_CO2 ([FLAG]   ) :  Activation of CO2 downregulation (used for CMIP6 version 6.1.0-6.1.10)      {OK_SECHIBA}
DOWNREGULATION_CO2 =  y 

# DOWNREGULATION_CO2_NEW ([FLAG]   ) :  Activation of CO2 downregulation (used for CMIP6 version 6.1.11 and later)      {OK_SECHIBA}
DOWNREGULATION_CO2_NEW =  n 

# DOWNREGULATION_CO2_BASELEVEL ([ppm]   ) :  CO2 base level     {DOWNREGULATION_CO2 or DOWNREGULATION_CO2_NEW}
DOWNREGULATION_CO2_BASELEVEL =  380. 

# DOWNREGULATION_CO2_MINIMUM ([ppm]   ) :  CO2 value above which downregulation is taken into account   {DOWNREGULATION_CO2_NEW}
DOWNREGULATION_CO2_MINIMUM =  280. 

# GB_REF ([s m-1]   ) :  Leaf bulk boundary layer resistance    {}
GB_REF =  1./25. 

# CLAYFRACTION_DEFAULT ([-]   ) :  default fraction of clay     {OK_SECHIBA }
CLAYFRACTION_DEFAULT =  0.2  

# SANDFRACTION_DEFAULT ([-]   ) :  default fraction of sand     {OK_SECHIBA }
SANDFRACTION_DEFAULT =  0.4  

# SILTFRACTION_DEFAULT ([-]   ) :  default fraction of silt     {OK_SECHIBA }
SILTFRACTION_DEFAULT =  0.4  

# MIN_VEGFRAC  ([-]  ) :  Minimal fraction of mesh a vegetation type can occupy         {OK_SECHIBA }
MIN_VEGFRAC  =  0.001  

# STEMPDIAG_BID  ([K]) :  only needed for an initial LAI if there is no restart file    {OK_SECHIBA }
STEMPDIAG_BID  =  280. 

# LAI_LEVEL_DEPTH ([-]  ) :     {}
LAI_LEVEL_DEPTH =  0.15 

# Oi ([ubar]  ) :  Intercellular oxygen partial pressure        {}
Oi =  210000. 

# TOO_LONG  ([days]   ) :  longest sustainable time without regeneration (vernalization)        {OK_STOMATE}
TOO_LONG  =  5. 

# TAU_FIRE  ([days]    ) :  Time scale for memory of the fire index (days). Validated for one year in the DGVM.         {OK_STOMATE }
TAU_FIRE  =  30. 

# LITTER_CRIT ([gC/m^2]  ) :  Critical litter quantity for fire         {OK_STOMATE }
LITTER_CRIT =  200. 

# FIRE_RESIST_STRUCT ([-]  ) :          {OK_STOMATE }
FIRE_RESIST_STRUCT =  0.5 

# CO2FRAC ([-]  ) :  What fraction of a burned plant compartment goes into the atmosphere       {OK_STOMATE }
CO2FRAC =  0.95, 0.95, 0., 0.3, 0., 0., 0.95, 0.95 

# BCFRAC_COEFF ([-]  ) :        {OK_STOMATE }
BCFRAC_COEFF =  0.3, 1.3, 88.2  

# FIREFRAC_COEFF  ([-]   ) :    {OK_STOMATE }
FIREFRAC_COEFF  =  0.45, 0.8, 0.6, 0.13 

# REF_GREFF ([1/year]  ) :  Asymptotic maximum mortality rate   {OK_STOMATE }
REF_GREFF =  0.035 

# OK_MINRES ([FLAG]) :  Do we try to reach a minimum reservoir even if we are severely stressed?        {OK_STOMATE }
OK_MINRES =  y 

# RESERVE_TIME_TREE  ([days]    ) :  maximum time during which reserve is used (trees)          {OK_STOMATE }
RESERVE_TIME_TREE  =  30. 

# RESERVE_TIME_GRASS  ([days]   ) :  maximum time during which reserve is used (grasses)        {OK_STOMATE }
RESERVE_TIME_GRASS  =  20.  

# F_FRUIT ([-]    ) :  Standard fruit allocation        {OK_STOMATE }
F_FRUIT =  0.1  

# ALLOC_SAP_ABOVE_GRASS  ([-]   ) :  fraction of sapwood allocation above ground        {OK_STOMATE }
ALLOC_SAP_ABOVE_GRASS  =  1.0  

# MIN_LTOLSR  ([-]   ) :  extrema of leaf allocation fraction   {OK_STOMATE }
MIN_LTOLSR  =  0.2 

# MAX_LTOLSR ([-]   ) :  extrema of leaf allocation fraction    {OK_STOMATE }
MAX_LTOLSR =  0.5 

# Z_NITROGEN ([m]  ) :  scaling depth for nitrogen limitation   {OK_STOMATE}
Z_NITROGEN =  0.2  

# NLIM_TREF  ([C]  ) :          {OK_STOMATE }
NLIM_TREF  =  25.  

# PIPE_TUNE1 ([-]    ) :  crown area    {OK_STOMATE }
PIPE_TUNE1 =  100.0 

# PIPE_TUNE2  ([-]      ) :  height     {OK_STOMATE }
PIPE_TUNE2  =  40.0  

# PIPE_TUNE3 ([-]    ) :  height        {OK_STOMATE }
PIPE_TUNE3 =  0.5  

# PIPE_TUNE4 ([-]  ) :  needed for stem diameter        {OK_STOMATE }
PIPE_TUNE4 =  0.3  

# PIPE_DENSITY  ([-]  ) :  Density      {OK_STOMATE }
PIPE_DENSITY  =  2.e5  

# PIPE_K1  ([-]   ) :           {OK_STOMATE }
PIPE_K1  =  8.e3  

# PIPE_TUNE_EXP_COEFF  ([-]   ) :  pipe tune exponential coeff          {OK_STOMATE }
PIPE_TUNE_EXP_COEFF  =  1.6  

# PRECIP_CRIT  ([mm/year]  ) :  minimum precip  {OK_STOMATE }
PRECIP_CRIT  =  100. 

# GDD_CRIT_ESTAB ([-]  ) :  minimum gdd for establishment of saplings   {OK_STOMATE }
GDD_CRIT_ESTAB =  150.  

# FPC_CRIT ([-]  ) :  critical fpc, needed for light competition and establishment      {OK_STOMATE }
FPC_CRIT =  0.95 

# ALPHA_GRASS ([-]   ) :  sapling characteristics : alpha's     {OK_STOMATE }
ALPHA_GRASS =  0.5 

# ALPHA_TREE ([-]   ) :  sapling characteristics : alpha's      {OK_STOMATE }
ALPHA_TREE =  1. 

# MASS_RATIO_HEART_SAP ([-]   ) :  mass ratio (heartwood+sapwood)/sapwood       {OK_STOMATE }
MASS_RATIO_HEART_SAP =  3. 

# TAU_HUM_MONTH ([days]  ) :  time scales for phenology and other processes     {OK_STOMATE }
TAU_HUM_MONTH =  20.  

# TAU_HUM_WEEK ([days]   ) :  time scales for phenology and other processes     {OK_STOMATE }
TAU_HUM_WEEK =  7. 

# TAU_T2M_MONTH ([days]     ) :  time scales for phenology and other processes  {OK_STOMATE }
TAU_T2M_MONTH =  20. 

# TAU_T2M_WEEK ([days]   ) :  time scales for phenology and other processes     {OK_STOMATE }
TAU_T2M_WEEK =  7. 

# TAU_TSOIL_MONTH  ([days]     ) :  time scales for phenology and other processes       {OK_STOMATE }
TAU_TSOIL_MONTH  =  20.  

# TAU_SOILHUM_MONTH ([days]   ) :  time scales for phenology and other processes        {OK_STOMATE }
TAU_SOILHUM_MONTH =  20.  

# TAU_GPP_WEEK  ([days]   ) :  time scales for phenology and other processes    {OK_STOMATE }
TAU_GPP_WEEK  =  7.  

# TAU_GDD ([days]   ) :  time scales for phenology and other processes  {OK_STOMATE }
TAU_GDD =  40.  

# TAU_NGD ([days]   ) :  time scales for phenology and other processes  {OK_STOMATE }
TAU_NGD =  50. 

# COEFF_TAU_LONGTERM ([days]   ) :  time scales for phenology and other processes       {OK_STOMATE }
COEFF_TAU_LONGTERM =  3.  

# BM_SAPL_CARBRES  ([-]   ) :           {OK_STOMATE }
BM_SAPL_CARBRES  =  5.  

# BM_SAPL_SAPABOVE ([-]    ) :          {OK_STOMATE}
BM_SAPL_SAPABOVE =  0.5  

# BM_SAPL_HEARTABOVE  ([-]    ) :       {OK_STOMATE }
BM_SAPL_HEARTABOVE  =  2. 

# BM_SAPL_HEARTBELOW  ([-]    ) :       {OK_STOMATE }
BM_SAPL_HEARTBELOW  =  2.  

# INIT_SAPL_MASS_LEAF_NAT ([-]    ) :           {OK_STOMATE }
INIT_SAPL_MASS_LEAF_NAT =  0.1  

# INIT_SAPL_MASS_LEAF_AGRI ([-]    ) :          {OK_STOMATE }
INIT_SAPL_MASS_LEAF_AGRI =  1.  

# INIT_SAPL_MASS_CARBRES ([-]    ) :    {OK_STOMATE }
INIT_SAPL_MASS_CARBRES =  5.  

# INIT_SAPL_MASS_ROOT ([-]   ) :        {OK_STOMATE }
INIT_SAPL_MASS_ROOT =  0.1  

# INIT_SAPL_MASS_FRUIT ([-]    ) :      {OK_STOMATE }
INIT_SAPL_MASS_FRUIT =  0.3  

# CN_SAPL_INIT  ([-]   ) :      {OK_STOMATE }
CN_SAPL_INIT  =  0.5  

# MIGRATE_TREE  ([m/year]   ) :         {OK_STOMATE }
MIGRATE_TREE  =  10000. 

# MIGRATE_GRASS ([m/year]   ) :         {OK_STOMATE }
MIGRATE_GRASS =  10000. 

# LAI_INITMIN_TREE ([m^2/m^2]  ) :      {OK_STOMATE }
LAI_INITMIN_TREE =  0.3 

# LAI_INITMIN_GRASS  ([m^2/m^2]    ) :          {OK_STOMATE }
LAI_INITMIN_GRASS  =  0.1 

# DIA_COEFF ([-]   ) :          {OK_STOMATE }
DIA_COEFF =  4., 0.5 

# MAXDIA_COEFF ([-]   ) :       {OK_STOMATE }
MAXDIA_COEFF =  100., 0.01  

# BM_SAPL_LEAF ([-]  ) :        {OK_STOMATE }
BM_SAPL_LEAF =  4., 4., 0.8, 5.  

# METABOLIC_REF_FRAC ([-]) :    {OK_STOMATE }
METABOLIC_REF_FRAC =  0.85   

# Z_DECOMP ([m]   ) :  scaling depth for soil activity  {OK_STOMATE }
Z_DECOMP =  0.2 

# CN ([-]  ) :  C/N ratio       {OK_STOMATE }
CN =  40., 40., 40., 40., 40., 40., 40., 40. 

# LC  ([-]   ) :  Lignine/C ratio of the different plant parts  {OK_STOMATE }
LC  =  0.22, 0.35, 0.35, 0.35, 0.35, 0.22, 0.22, 0.22 

# FRAC_SOIL_STRUCT_AA ([-]) :  frac_soil(istructural,iactive,iabove)    {OK_STOMATE }
FRAC_SOIL_STRUCT_AA =  0.55 

# FRAC_SOIL_STRUCT_A  ([-]) :  frac_soil(istructural,iactive,ibelow)    {OK_STOMATE }
FRAC_SOIL_STRUCT_A  =  0.45 

# FRAC_SOIL_STRUCT_SA ([-]   ) :  frac_soil(istructural,islow,iabove)   {OK_STOMATE}
FRAC_SOIL_STRUCT_SA =  0.7   

# FRAC_SOIL_STRUCT_SB ([-]   ) :  frac_soil(istructural,islow,ibelow)   {OK_STOMATE }
FRAC_SOIL_STRUCT_SB =  0.7   

# FRAC_SOIL_METAB_AA  ([-]   ) :  frac_soil(imetabolic,iactive,iabove)          {OK_STOMATE }
FRAC_SOIL_METAB_AA  =  0.45  

# FRAC_SOIL_METAB_AB  ([-]   ) :  frac_soil(imetabolic,iactive,ibelow)  {OK_STOMATE }
FRAC_SOIL_METAB_AB  =  0.45   

# METABOLIC_LN_RATIO ([-]   ) :         {OK_STOMATE }
METABOLIC_LN_RATIO =  0.018   

# TAU_METABOLIC ([days] ) :     {OK_STOMATE }
TAU_METABOLIC =  0.066 

# TAU_STRUCT  ([days]) :        {OK_STOMATE }
TAU_STRUCT  =  0.245  

# SOIL_Q10 ([-]) :      {OK_STOMATE }
SOIL_Q10 =  0.69 ( 

# TSOIL_REF ([C]   ) :          {OK_STOMATE }
TSOIL_REF =  30.  

# LITTER_STRUCT_COEF  ([-]   ) :        {OK_STOMATE }
LITTER_STRUCT_COEF  =  3.  

# MOIST_COEFF ([-]   ) :        {OK_STOMATE }
MOIST_COEFF =  1.1, 2.4, 0.29 

# MOISTCONT_MIN ([-]) :  minimum soil wetness to limit the heterotrophic respiration    {OK_STOMATE }
MOISTCONT_MIN =  0.25 

# FRAC_TURNOVER_DAILY  ([-]) :          {OK_STOMATE }
FRAC_TURNOVER_DAILY  =  0.55 

# TAX_MAX ([-]   ) :  maximum fraction of allocatable biomass used for maintenance respiration  {OK_STOMATE }
TAX_MAX =  0.8 

# MIN_GROWTHINIT_TIME  ([days]  ) :  minimum time since last beginning of a growing season      {OK_STOMATE }
MIN_GROWTHINIT_TIME  =  300.  

# MOIAVAIL_ALWAYS_TREE ([-]   ) :  moisture availability above which moisture tendency doesn't matter   {OK_STOMATE }
MOIAVAIL_ALWAYS_TREE =  1.0  

# MOIAVAIL_ALWAYS_GRASS  ([-]   ) :  moisture availability above which moisture tendency doesn't matter         {OK_STOMATE }
MOIAVAIL_ALWAYS_GRASS  =  0.6  

# T_ALWAYS_ADD ([C]    ) :  monthly temp. above which temp. tendency doesn't matter     {OK_STOMATE }
T_ALWAYS_ADD =  10. 

# GDDNCD_REF  ([-]   ) :        {OK_STOMATE }
GDDNCD_REF  =  603.  

# GDDNCD_CURVE ([-]  ) :        {OK_STOMATE }
GDDNCD_CURVE =  0.0091  

# GDDNCD_OFFSET ([-]  ) :       {OK_STOMATE }
GDDNCD_OFFSET =  64.  

# BM_SAPL_RESCALE  ([-]  ) :    {OK_STOMATE }
BM_SAPL_RESCALE  =  40.  

# MAINT_RESP_MIN_VMAX ([-]  ) :         {OK_STOMATE }
MAINT_RESP_MIN_VMAX =  0.3 

# MAINT_RESP_COEFF  ([-] ) :    {OK_STOMATE }
MAINT_RESP_COEFF  =  1.4  

# FRAC_CARB_AP ([-]) :  frac carb coefficients from active pool: depends on clay content        {OK_STOMATE }
FRAC_CARB_AP =  0.004 

# FRAC_CARB_SA ([-]) :  frac_carb_coefficients from slow pool   {OK_STOMATE }
FRAC_CARB_SA =  0.42 

# FRAC_CARB_SP ([-] ) :  frac_carb_coefficients from slow pool  {OK_STOMATE }
FRAC_CARB_SP =  0.03 

# FRAC_CARB_PA ([-]) :  frac_carb_coefficients from passive pool        {OK_STOMATE }
FRAC_CARB_PA =  0.45 

# FRAC_CARB_PS ([-]) :  frac_carb_coefficients from passive pool        {OK_STOMATE }
FRAC_CARB_PS =  0.0 

# ACTIVE_TO_PASS_CLAY_FRAC ([-] ) :     {OK_STOMATE }
ACTIVE_TO_PASS_CLAY_FRAC =  0.68   

# CARBON_TAU_IACTIVE ( [days] ) :  residence times in carbon pools      {OK_STOMATE }
CARBON_TAU_IACTIVE =  0.149 

# CARBON_TAU_ISLOW ([days]) :  residence times in carbon pools  {OK_STOMATE }
CARBON_TAU_ISLOW =  7.0 

# CARBON_TAU_IPASSIVE ([days] ) :  residence times in carbon pools      {OK_STOMATE }
CARBON_TAU_IPASSIVE =  300. 

# FLUX_TOT_COEFF ([days] ) :    {OK_STOMATE }
FLUX_TOT_COEFF =  1.2, 1.4,.75 

# NEW_TURNOVER_TIME_REF ([days]  ) :    {OK_STOMATE }
NEW_TURNOVER_TIME_REF =  20.  

# LEAF_AGE_CRIT_TREF ([days]  ) :       {OK_STOMATE }
LEAF_AGE_CRIT_TREF =  20.  

# LEAF_AGE_CRIT_COEFF  ([-] ) :         {OK_STOMATE }
LEAF_AGE_CRIT_COEFF  =  1.5, 0.75, 10.  

# VMAX_OFFSET  ([-]  ) :  offset (minimum relative vcmax)       {OK_STOMATE }
VMAX_OFFSET  =  0.3 

# LEAFAGE_FIRSTMAX ([-] ) :  leaf age at which vmax attains vcmax_opt (in fraction of critical leaf age)        {OK_STOMATE }
LEAFAGE_FIRSTMAX =  0.03  

# LEAFAGE_LASTMAX  ([-]  ) :  leaf age at which vmax falls below vcmax_opt (in fraction of critical leaf age)   {OK_STOMATE }
LEAFAGE_LASTMAX  =  0.5  

# LEAFAGE_OLD  ([-]  ) :  leaf age at which vmax attains its minimum (in fraction of critical leaf age)         {OK_STOMATE }
LEAFAGE_OLD  =  1. 

# GPPFRAC_DORMANCE  ([-]) :  rapport maximal GPP/GGP_max pour dormance  {OK_STOMATE }
GPPFRAC_DORMANCE  =  0.2  

# TAU_CLIMATOLOGY ([days]) :  tau for "climatologic variables   {OK_STOMATE }
TAU_CLIMATOLOGY =  20 

# HVC1  ([-]  ) :  parameters for herbivore activity    {OK_STOMATE }
HVC1  =  0.019 

# HVC2  ([-]  ) :  parameters for herbivore activity    {OK_STOMATE }
HVC2  =  1.38 

# LEAF_FRAC_HVC ([-] ) :  parameters for herbivore activity     {OK_STOMATE }
LEAF_FRAC_HVC =  0.33 

# TLONG_REF_MAX ([K]  ) :  maximum reference long term temperature      {OK_STOMATE }
TLONG_REF_MAX =  303.1 

# TLONG_REF_MIN  ([K]  ) :  minimum reference long term temperature     {OK_STOMATE }
TLONG_REF_MIN  =  253.1 

# NCD_MAX_YEAR ([days]) :       {OK_STOMATE }
NCD_MAX_YEAR =  3.  

# GDD_THRESHOLD  ([days] ) :    {OK_STOMATE }
GDD_THRESHOLD  =  5.  

# GREEN_AGE_EVER  ([-]  ) :     {OK_STOMATE }
GREEN_AGE_EVER  =  2.  

# GREEN_AGE_DEC ([-] ) :        {OK_STOMATE }
GREEN_AGE_DEC =  0.5  

# ESTAB_MAX_TREE ([-]   ) :  Maximum tree establishment rate    {OK_DGVM}
ESTAB_MAX_TREE =  0.12  

# ESTAB_MAX_GRASS ([-]  ) :  Maximum grass establishment rate   {OK_DGVM}
ESTAB_MAX_GRASS =  0.12  

# ESTABLISH_SCAL_FACT ([-] ) :          {OK_DGVM }
ESTABLISH_SCAL_FACT =  5. 

# MAX_TREE_COVERAGE  ([-] ) :           {OK_DGVM }
MAX_TREE_COVERAGE  =  0.98 

# IND_0_ESTAB ([-]  ) :         {OK_DGVM }
IND_0_ESTAB =  0.2 

# ANNUAL_INCREASE ([FLAG]) :  for diagnosis of fpc increase, compare today's fpc to last year's maximum (T) or to fpc of last time step (F)?    {OK_DGVM}
ANNUAL_INCREASE =  y 

# MIN_COVER  ([-]  ) :  For trees, minimum fraction of crown area occupied      {OK_DGVM}
MIN_COVER  =  0.05  

# IND_0  ([-]  ) :  initial density of individuals      {OK_DGVM}
IND_0  =  0.02  

# MIN_AVAIL ([-]  ) :  minimum availability     {OK_DGVM}
MIN_AVAIL =  0.01 

# RIP_TIME_MIN ([year]  ) :     {OK_DGVM}
RIP_TIME_MIN =  1.25  

# NPP_LONGTERM_INIT ([gC/m^2/year]) :           {OK_DGVM}
NPP_LONGTERM_INIT =  10. 

# EVERYWHERE_INIT ([-] ) :      {OK_DGVM}
EVERYWHERE_INIT =  0.05  

# PRINTLEV ([0, 1, 2, 3, 4]) :  Print level for text output     {}
PRINTLEV =  2 

# PRINTLEV_modname ([0, 1, 2, 3, 4]) :  Specific print level of text output for the module "modname". Default as PRINTLEV.      {}
PRINTLEV_modname =  PRINTLEV 

# DRY_SOIL_HEAT_CAPACITY ([J.m^{-3}.K^{-1}] ) :  Dry soil Heat capacity of soils        {OK_SECHIBA }
DRY_SOIL_HEAT_CAPACITY =  1.80e+6 

# DRY_SOIL_HEAT_COND ([W.m^{-2}.K^{-1}] ) :  Dry soil Thermal Conductivity of soils     {OK_SECHIBA}
DRY_SOIL_HEAT_COND =  0.40 

# SNOW_HEAT_COND ([W.m^{-2}.K^{-1}]) :  Thermal Conductivity of snow    {OK_SECHIBA  }
SNOW_HEAT_COND =  0.3 

# SNOW_DENSITY ([-] ) :  Snow density for the soil thermodynamics       {OK_SECHIBA }
SNOW_DENSITY =  330.0 

# NOBIO_WATER_CAPAC_VOLUMETRI ([s/m^2]) :       {}
NOBIO_WATER_CAPAC_VOLUMETRI =  150. 

# SECHIBA_QSINT  ([m]) :  Interception reservoir coefficient    {OK_SECHIBA }
SECHIBA_QSINT  =  0.02 

# OK_FREEZE ([FLAG]) :  Activate the complet soil freezing scheme       {OK_SECHIBA }
OK_FREEZE =  TRUE 

# READ_REFTEMP ([FLAG]) :  Initialize soil temperature using climatological temperature         {}
READ_REFTEMP =  True/False depening on OK_FREEZE 

# OK_FREEZE_THERMIX ([FLAG]) :  Activate thermal part of the soil freezing scheme       {}
OK_FREEZE_THERMIX =  True if OK_FREEZE else false 

# OK_ECORR ([FLAG]) :  Energy correction for freezing   {OK_FREEZE_THERMIX}
OK_ECORR =  True if OK_FREEZE else false 

# OK_FREEZE_THAW_LATENT_HEAT ([FLAG]) :  Activate latent heat part of the soil freezing scheme  {}
OK_FREEZE_THAW_LATENT_HEAT =  FALSE  

# fr_dT ([K] ) :  Freezing window       {OK_SECHIBA}
fr_dT =  2.0 

# OK_FREEZE_CWRR ([FLAG]) :  CWRR freezing scheme by I. Gouttevin       {}
OK_FREEZE_CWRR =  True if OK_FREEZE else false 

# OK_THERMODYNAMICAL_FREEZING ([FLAG]) :  Calculate frozen fraction thermodynamically   {OK_FREEZE_CWRR}
OK_THERMODYNAMICAL_FREEZING =  True 

# CHECK_CWRR ([FLAG]) :  Calculate diagnostics to check CWRR water balance      {}
CHECK_CWRR =  n 

# VEGET_UPDATE ([years]) :  Update vegetation frequency: 0Y or 1Y       {}
VEGET_UPDATE =  0Y 

# SECHIBA_ZCANOP ([m]) :  Soil level used for canopy development (if STOMATE disactivated)      {OK_SECHIBA and .NOT. OK_STOMATE  }
SECHIBA_ZCANOP =  0.5 

# SECHIBA_QSINT  ([m]) :  Interception reservoir coefficient    {OK_SECHIBA }
SECHIBA_QSINT  =  0.1 

# SECHIBA_VEGMAX ([-]) :  Maximum vegetation distribution within the mesh (0-dim mode)  {IMPOSE_VEG}
SECHIBA_VEGMAX =  0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0 

# SECHIBA_FRAC_NOBIO ([-]) :  Fraction of other surface types within the mesh (0-dim mode)      {IMPOSE_VEG}
SECHIBA_FRAC_NOBIO =  0.0 

# SECHIBA_LAI ([-]) :  LAI for all vegetation types (0-dim mode)        {IMPOSE_VEG}
SECHIBA_LAI =  0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2. 

# SOIL_FRACTIONS ([-]) :  Fraction of the 3 soil types (0-dim mode)     {IMPOSE_VEG and IMPOSE_SOILT}
SOIL_FRACTIONS =  -9999._sechiba 

# CLAY_FRACTION ([-] ) :  Fraction of the clay fraction (0-dim mode)    {IMPOSE_VEG and IMPOSE_SOIL}
CLAY_FRACTION =  0.2 

# SAND_FRACTION ([-] ) :  Fraction of the clay fraction (0-dim mode)    {IMPOSE_VEG and IMPOSE_SOIL}
SAND_FRACTION =  0.4 

# REINF_SLOPE ([-]) :  Slope coef for reinfiltration    {IMPOSE_VEG}
REINF_SLOPE =  0.1 

# SLOWPROC_HEIGHT ([m]) :  Height for all vegetation types      {OK_SECHIBA}
SLOWPROC_HEIGHT =  0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0 

# GET_SLOPE ([FLAG]) :  Read slopes from file and do the interpolation  {}
GET_SLOPE =  n 

# LAI_FILE ([FILE]) :  Name of file from which the vegetation map is to be read         {LAI_MAP}
LAI_FILE =  lai2D.nc 

# RENORM_LAI ([FLAG]) :  flag to force LAI renormelization      {LAI_MAP}
RENORM_LAI =  n 

# VEGETATION_FILE ([FILE]) :  Name of file from which the vegetation map is to be read  {}
VEGETATION_FILE =  PFTmap.nc 

# SOILCLASS_FILE ([FILE]) :  Name of file from which soil types are read        {NOT(IMPOSE_VEG)}
SOILCLASS_FILE =  soils_param.nc 

# SLOPE_NOREINF ([-]) :  See slope_noreinf above        {}
SLOPE_NOREINF =  0.5 

# TOPOGRAPHY_FILE ([FILE]) :  Name of file from which the topography map is to be read  {}
TOPOGRAPHY_FILE =  cartepente2d_15min.nc 

# WOODHARVEST_FILE ([FILE]) :  Name of file from which the wood harvest will be read    {DO_WOOD_HARVEST}
WOODHARVEST_FILE =  woodharvest.nc 

# SOILALB_FILE ([FILE]) :  Name of file from which the bare soil albedo         {NOT(IMPOSE_AZE)}
SOILALB_FILE =  soils_param.nc 

# ALB_BG_FILE ([FILE]) :  Name of file from which the background albedo is read         {ALB_BG_MODIS}
ALB_BG_FILE =  alb_bg.nc 

# CDRAG_FROM_GCM ([FLAG]) :  Keep cdrag coefficient from gcm.   {OK_SECHIBA}
CDRAG_FROM_GCM =  y 

# N_FERTIL_FILE (- ) :  File name       {CHEMISTRY_BVOC and NOx_FERTILIZERS_USE}
N_FERTIL_FILE =  orchidee_fertilizer_1995.nc 

# N_FERTIL_FILE (-) :  File name        {CHEMISTRY_BVOC and NOx_FERTILIZERS_USE}
N_FERTIL_FILE =  orchidee_fertilizer_1995.nc 

# ENERBIL_TSURF (Kelvin [K]) :  Initial temperature if not found in restart     {OK_SECHIBA}
ENERBIL_TSURF =  280. 

# ENERBIL_EVAPOT () :  Initial Soil Potential Evaporation       {OK_SECHIBA       }
ENERBIL_EVAPOT =  0.0 

# BEDROCK_FLAG ([FLAG]) :  Flag to consider bedrock at deeper layers.   {}
BEDROCK_FLAG =  0 

# THERMOSOIL_TPRO (Kelvin [K]) :  Initial soil temperature profile if not found in restart      {OK_SECHIBA}
THERMOSOIL_TPRO =  280. 

# SOIL_REFTEMP_FILE ([FILE]) :  File with climatological soil temperature       {READ_REFTEMP}
SOIL_REFTEMP_FILE =  reftemp.nc 

# DO_PONDS ([FLAG]) :  Should we include ponds          {}
DO_PONDS =  n 

# FROZ_FRAC_CORR  ([-]) :  Coefficient for the frozen fraction correction       {OK_FREEZE}
FROZ_FRAC_CORR  =  1.0 

# MAX_FROZ_HYDRO ([-]) :  Coefficient for the frozen fraction correction        {OK_FREEZE}
MAX_FROZ_HYDRO =  1.0 

# SMTOT_CORR ([-]) :  Coefficient for the frozen fraction correction    {OK_FREEZE}
SMTOT_CORR =  2.0 

# DO_RSOIL ([FLAG]) :  Should we reduce soil evaporation with a soil resistance         {}
DO_RSOIL =  n 

# OK_DYNROOT ([FLAG]) :  Calculate dynamic root profile to optimize soil moisture usage         {}
OK_DYNROOT =  n 

# CWRR_N_VANGENUCHTEN ([-]) :  Van genuchten coefficient n      {}
CWRR_N_VANGENUCHTEN =  1.89, 1.56, 1.31 

# CWRR_A_VANGENUCHTEN ([1/mm]  ) :  Van genuchten coefficient a         {}
CWRR_A_VANGENUCHTEN =  0.0075, 0.0036, 0.0019 

# VWC_RESIDUAL ([m3/m3]  ) :  Residual soil water content       {}
VWC_RESIDUAL =  0.065, 0.078, 0.095 

# VWC_SAT ([m3/m3]  ) :  Saturated soil water content   {}
VWC_SAT =  0.41, 0.43, 0.41 

# CWRR_KS  ([mm/d]   ) :  Hydraulic conductivity Saturation     {}
CWRR_KS  =  1060.8, 249.6, 62.4 

# WETNESS_TRANSPIR_MAX ([-]    ) :  Soil moisture above which transpir is max   {}
WETNESS_TRANSPIR_MAX =  0.5, 0.5, 0.5 

# VWC_FC  ([m3/m3]   ) :  Volumetric water content field capacity       {}
VWC_FC  =  0.32, 0.32, 0.32 

# VWC_WP ([m3/m3]   ) :  Volumetric water content Wilting pt    {}
VWC_WP =  0.10, 0.10, 0.10  

# VWC_MIN_FOR_WET_ALB ([m3/m3]  ) :  Vol. wat. cont. above which albedo is cst  {}
VWC_MIN_FOR_WET_ALB =  0.25, 0.25, 0.25 

# VWC_MAX_FOR_DRY_ALB ([m3/m3]   ) :  Vol. wat. cont. below which albedo is cst         {}
VWC_MAX_FOR_DRY_ALB =  0.1, 0.1, 0.1 

# HYDROL_MOISTURE_CONTENT ([m3/m3]) :  Soil moisture on each soil tile and levels       {}
HYDROL_MOISTURE_CONTENT =  0.3 

# US_INIT ([-]) :  US_NVM_NSTM_NSLM     {}
US_INIT =  0.0 

# ZWT_FORCE ([m]) :  Prescribed water depth, dimension nstm     {}
ZWT_FORCE =  -9999. -9999. -9999. 

# FREE_DRAIN_COEF ([-]) :  Coefficient for free drainage at bottom, dimension nstm      {}
FREE_DRAIN_COEF =  1.0 1.0 1.0 

# WATER_TO_INFILT ([mm]) :  Water to be infiltrated on top of the soil  {}
WATER_TO_INFILT =  0.0 

# EVAPNU_SOIL ([mm]) :  Bare soil evap on each soil if not found in restart     {}
EVAPNU_SOIL =  0.0 

# HYDROL_SNOW () :  Initial snow mass if not found in restart   {OK_SECHIBA}
HYDROL_SNOW =  0.0 

# HYDROL_SNOWAGE (***) :  Initial snow age if not found in restart      {OK_SECHIBA}
HYDROL_SNOWAGE =  0.0 

# HYDROL_SNOW_NOBIO ([mm]) :  Initial snow amount on ice, lakes, etc. if not found in restart   {OK_SECHIBA}
HYDROL_SNOW_NOBIO =  0.0 

# HYDROL_SNOW_NOBIO_AGE (***) :  Initial snow age on ice, lakes, etc. if not found in restart   {OK_SECHIBA}
HYDROL_SNOW_NOBIO_AGE =  0.0 

# HYDROL_QSV ([mm]) :  Initial water on canopy if not found in restart  {OK_SECHIBA}
HYDROL_QSV =  0.0 

# CWRR_NKS_N0  ([-]) :  fitted value for relation log((n-n0)/(n_ref-n0))        {}
CWRR_NKS_N0  =  0.0 

# CWRR_NKS_POWER ([-]) :  fitted value for relation log((n-n0)/(n_ref-n0))      {}
CWRR_NKS_POWER =  0.0 

# CWRR_AKS_A0  ([1/mm]) :  fitted value for relation log((a-a0)/(a_ref-a0))     {}
CWRR_AKS_A0  =  0.0 

# CWRR_AKS_POWER ([-]) :  fitted value for relation log((a-a0)/(a_ref-a0))      {}
CWRR_AKS_POWER =  0.0 

# KFACT_DECAY_RATE ([1/m]) :  Factor for Ks decay with depth    {}
KFACT_DECAY_RATE =  2.0 

# KFACT_STARTING_DEPTH ([m]) :  Depth for compacted value of Ks         {}
KFACT_STARTING_DEPTH =  0.3 

# KFACT_MAX ([-]) :  Maximum Factor for Ks increase due to vegetation   {}
KFACT_MAX =  10.0 

# DT_ROUTING  ([seconds]) :  Time step of the routing scheme    {RIVER_ROUTING}
DT_ROUTING  =  86400. 

# ROUTING_RIVERS ([-]) :  Number of rivers      {RIVER_ROUTING}
ROUTING_RIVERS =  50 

# DO_FLOODINFILT ([FLAG]) :  Should floodplains reinfiltrate into the soil      {RIVER_ROUTING}
DO_FLOODINFILT =  n 

# DO_SWAMPS ([FLAG]) :  Should we include swamp parameterization        {RIVER_ROUTING}
DO_SWAMPS =  n 

# DO_PONDS ([FLAG]) :  Should we include ponds          {RIVER_ROUTING}
DO_PONDS =  n 

# SLOW_TCST ([days]) :  Time constant for the slow reservoir    {RIVER_ROUTING }
SLOW_TCST =  25.0  

# FAST_TCST ([days]) :  Time constant for the fast reservoir    {RIVER_ROUTING }
FAST_TCST =  3.0  

# STREAM_TCST ([days]) :  Time constant for the stream reservoir        {RIVER_ROUTING}
STREAM_TCST =  0.24 

# FLOOD_TCST ([days]) :  Time constant for the flood reservoir          {RIVER_ROUTING}
FLOOD_TCST =  4.0 

# SWAMP_CST ([-]) :  Fraction of the river that flows back to swamps    {RIVER_ROUTING}
SWAMP_CST =  0.2 

# FLOOD_BETA ([-] ) :  Parameter to fix the shape of the floodplain     {RIVER_ROUTING}
FLOOD_BETA =  2.0 

# POND_BETAP ([-] ) :  Ratio of the basin surface intercepted by ponds and the maximum surface of ponds         {RIVER_ROUTING}
POND_BETAP =  0.5 

# FLOOD_CRI ([mm] ) :  Potential height for which all the basin is flooded      {DO_FLOODPLAINS or DO_PONDS}
FLOOD_CRI =  2000. 

# POND_CRI ([mm] ) :  Potential height for which all the basin is a pond        {DO_FLOODPLAINS or DO_PONDS}
POND_CRI =  2000. 

# MAX_LAKE_RESERVOIR ([kg/m2(routing area)] ) :  Maximum limit of water in lake_reservoir       {RIVER_ROUTING}
MAX_LAKE_RESERVOIR =  7000 

# RIVER_DESC ([FLAG]) :  Writes out a description of the rivers         {RIVER_ROUTING}
RIVER_DESC =  n 

# RIVER_DESC_FILE ([FILE]) :  Filename in which we write the description of the rivers. If suffix is ".nc" a netCDF file is created     {RIVER_DESC}
RIVER_DESC_FILE =  river_desc.nc 

# ROUTING_FILE ([FILE]) :  Name of file which contains the routing information  {RIVER_ROUTING}
ROUTING_FILE =  routing.nc 

# IRRIGATION_FILE ([FILE]) :  Name of file which contains the map of irrigated areas    {DO_IRRIGATION OR DO_FLOODPLAINS}
IRRIGATION_FILE =  floodplains.nc 

# ROUTING_METHOD (character string) :  Choice of routing module to be used      {RIVER_ROUTING=T}
ROUTING_METHOD =  standard 

# EPS_CARBON ([%]   ) :  Allowed error on carbon stock  {SPINUP_ANALYTIC}
EPS_CARBON =  0.01 

# SPINUP_PERIOD ([years]   ) :  Period to calulcate equilibrium during spinup analytic  {SPINUP_ANALYTIC}
SPINUP_PERIOD =  -1 

# STOMATE_FORCING_NAME ([FILE]) :  Name of STOMATE's forcing file       {OK_STOMATE}
STOMATE_FORCING_NAME =  NONE 

# STOMATE_FORCING_MEMSIZE ([MegaBytes]) :  Size of STOMATE forcing data in memory       {OK_STOMATE}
STOMATE_FORCING_MEMSIZE =  50 

# STOMATE_CFORCING_NAME ([FILE]) :  Name of STOMATE's carbon forcing file       {OK_STOMATE}
STOMATE_CFORCING_NAME =  NONE 

# FORCESOIL_STEP_PER_YEAR ([days, months, year]) :  Number of time steps per year for carbon spinup.    {OK_STOMATE}
FORCESOIL_STEP_PER_YEAR =  365 

# FORCESOIL_NB_YEAR ([years]) :  Number of years saved for carbon spinup.       {OK_STOMATE}
FORCESOIL_NB_YEAR =  1 

# XIOS_ORCHIDEE_OK ([FLAG]) :  Use XIOS for writing diagnostics file    {}
XIOS_ORCHIDEE_OK =  y  

# XIOS_INTERPOLATION ([FLAG]) :  Actiave reading and intrepolation using XIOS   {XIOS_ORCHIDEE_OK}
XIOS_INTERPOLATION =  n 

# XIOS_REMAP_OUTPUT ([FLAG]) :  Actiave remaping of diagnostic output files to regular grid     {XIOS_ORCHIDEE_OK .AND. grid_type=unstructured}
XIOS_REMAP_OUTPUT =  True 

# DT_STOMATE ([seconds]) :  Time step of STOMATE and other slow processes       {OK_STOMATE}
DT_STOMATE =  86400.