source: codes/icosagcm/branches/SATURN_DYNAMICO/LMDZ.COMMON/config/ppsrc/dyn/initfluxsto_p.f @ 224

!
! $Id: initfluxsto_p.F 1438 2010-10-08 10:19:34Z jghattas $
!
      subroutine initfluxsto_p
     .  (infile,tstep,t_ops,t_wrt,
     .                    fileid,filevid,filedid)





       use parallel_lmdz
       use Write_field
       use misc_mod
       
      implicit none

C
C   Routine d'initialisation des ecritures des fichiers histoires LMDZ
C   au format IOIPSL
C
C   Appels succesifs des routines: histbeg
C                                  histhori
C                                  histver
C                                  histdef
C                                  histend
C
C   Entree:
C
C      infile: nom du fichier histoire a creer
C      day0,anne0: date de reference
C      tstep: duree du pas de temps en seconde
C      t_ops: frequence de l'operation pour IOIPSL
C      t_wrt: frequence d'ecriture sur le fichier
C
C   Sortie:
C      fileid: ID du fichier netcdf cree
C      filevid:ID du fichier netcdf pour la grille v
C
C   L. Fairhead, LMD, 03/99
C
C =====================================================================
C
C   Declarations
!-----------------------------------------------------------------------
!   INCLUDE 'dimensions.h'
!
!   dimensions.h contient les dimensions du modele
!   ndm est tel que iim=2**ndm
!-----------------------------------------------------------------------

      INTEGER iim,jjm,llm,ndm

      PARAMETER (iim= 128,jjm=96,llm=64,ndm=1)

!-----------------------------------------------------------------------
!
! $Header$
!
!
!  ATTENTION!!!!: ce fichier include est compatible format fixe/format libre
!                 veillez  n'utiliser que des ! pour les commentaires
!                 et  bien positionner les & des lignes de continuation
!                 (les placer en colonne 6 et en colonne 73)
!
!
!-----------------------------------------------------------------------
!   INCLUDE 'paramet.h'

      INTEGER  iip1,iip2,iip3,jjp1,llmp1,llmp2,llmm1
      INTEGER  kftd,ip1jm,ip1jmp1,ip1jmi1,ijp1llm
      INTEGER  ijmllm,mvar
      INTEGER jcfil,jcfllm

      PARAMETER( iip1= iim+1,iip2=iim+2,iip3=iim+3                       &
     &    ,jjp1=jjm+1-1/jjm)
      PARAMETER( llmp1 = llm+1,  llmp2 = llm+2, llmm1 = llm-1 )
      PARAMETER( kftd  = iim/2 -ndm )
      PARAMETER( ip1jm  = iip1*jjm,  ip1jmp1= iip1*jjp1 )
      PARAMETER( ip1jmi1= ip1jm - iip1 )
      PARAMETER( ijp1llm= ip1jmp1 * llm, ijmllm= ip1jm * llm )
      PARAMETER( mvar= ip1jmp1*( 2*llm+1) + ijmllm )
      PARAMETER( jcfil=jjm/2+5, jcfllm=jcfil*llm )

!-----------------------------------------------------------------------
!
! $Id: comconst.h 1437 2010-09-30 08:29:10Z emillour $
!
!-----------------------------------------------------------------------
! INCLUDE comconst.h

      COMMON/comconsti/im,jm,lllm,imp1,jmp1,lllmm1,lllmp1,lcl,          &
     &                 iflag_top_bound,mode_top_bound
      COMMON/comconstr/dtvr,daysec,                                     &
     & pi,dtphys,dtdiss,rad,r,kappa,cotot,unsim,g,omeg                  &
     & ,dissip_fac_mid,dissip_fac_up,dissip_deltaz,dissip_hdelta        &
     & ,dissip_pupstart  ,tau_top_bound,                                &
     & daylen,molmass, ihf
      COMMON/cpdetvenus/cpp,nu_venus,t0_venus

      INTEGER im,jm,lllm,imp1,jmp1,lllmm1,lllmp1,lcl
      REAL dtvr ! dynamical time step (in s)
      REAL daysec !length (in s) of a standard day
      REAL pi    ! something like 3.14159....
      REAL dtphys ! (s) time step for the physics
      REAL dtdiss ! (s) time step for the dissipation
      REAL rad ! (m) radius of the planet
      REAL r ! Reduced Gas constant r=R/mu
             ! with R=8.31.. J.K-1.mol-1, mu: mol mass of atmosphere (kg/mol)
      REAL cpp   ! Cp
      REAL kappa ! kappa=R/Cp 
      REAL cotot
      REAL unsim ! = 1./iim
      REAL g ! (m/s2) gravity
      REAL omeg ! (rad/s) rotation rate of the planet
! Dissipation factors, for Earth model:
      REAL dissip_factz,dissip_zref !dissip_deltaz
! Dissipation factors, for other planets:
      REAL dissip_fac_mid,dissip_fac_up,dissip_deltaz,dissip_hdelta
      REAL dissip_pupstart
      INTEGER iflag_top_bound,mode_top_bound
      REAL tau_top_bound
      REAL daylen ! length of solar day, in 'standard' day length
      REAL molmass ! (g/mol) molar mass of the atmosphere

      REAL nu_venus,t0_venus ! coeffs needed for Cp(T), Venus atmosphere
      REAL ihf  ! (W/m2) intrinsic heat flux for giant planets


!-----------------------------------------------------------------------
!
! $Id: comvert.h 1654 2012-09-24 15:07:18Z aslmd $
!
!-----------------------------------------------------------------------
!   INCLUDE 'comvert.h'

      COMMON/comvertr/ap(llm+1),bp(llm+1),presnivs(llm),dpres(llm),     &
     &               pa,preff,nivsigs(llm),nivsig(llm+1),               &
     &               aps(llm),bps(llm),scaleheight,pseudoalt(llm)

      common/comverti/disvert_type, pressure_exner

      real ap     ! hybrid pressure contribution at interlayers
      real bp     ! hybrid sigma contribution at interlayer
      real presnivs ! (reference) pressure at mid-layers
      real dpres
      real pa     ! reference pressure (Pa) at which hybrid coordinates
                  ! become purely pressure
      real preff  ! reference surface pressure (Pa)
      real nivsigs
      real nivsig
      real aps    ! hybrid pressure contribution at mid-layers
      real bps    ! hybrid sigma contribution at mid-layers
      real scaleheight ! atmospheric (reference) scale height (km)
      real pseudoalt ! pseudo-altitude of model levels (km), based on presnivs(),
                     ! preff and scaleheight

      integer disvert_type ! type of vertical discretization:
                           ! 1: Earth (default for planet_type==earth),
                           !     automatic generation
                           ! 2: Planets (default for planet_type!=earth),
                           !     using 'z2sig.def' (or 'esasig.def) file

      logical pressure_exner
!     compute pressure inside layers using Exner function, else use mean
!     of pressure values at interfaces

 !-----------------------------------------------------------------------
!
! $Header$
!
!CDK comgeom
      COMMON/comgeom/                                                   &
     & cu(ip1jmp1),cv(ip1jm),unscu2(ip1jmp1),unscv2(ip1jm),             &
     & aire(ip1jmp1),airesurg(ip1jmp1),aireu(ip1jmp1),                  &
     & airev(ip1jm),unsaire(ip1jmp1),apoln,apols,                       &
     & unsairez(ip1jm),airuscv2(ip1jm),airvscu2(ip1jm),                 &
     & aireij1(ip1jmp1),aireij2(ip1jmp1),aireij3(ip1jmp1),              &
     & aireij4(ip1jmp1),alpha1(ip1jmp1),alpha2(ip1jmp1),                &
     & alpha3(ip1jmp1),alpha4(ip1jmp1),alpha1p2(ip1jmp1),               &
     & alpha1p4(ip1jmp1),alpha2p3(ip1jmp1),alpha3p4(ip1jmp1),           &
     & fext(ip1jm),constang(ip1jmp1),rlatu(jjp1),rlatv(jjm),            &
     & rlonu(iip1),rlonv(iip1),cuvsurcv(ip1jm),cvsurcuv(ip1jm),         &
     & cvusurcu(ip1jmp1),cusurcvu(ip1jmp1),cuvscvgam1(ip1jm),           &
     & cuvscvgam2(ip1jm),cvuscugam1(ip1jmp1),                           &
     & cvuscugam2(ip1jmp1),cvscuvgam(ip1jm),cuscvugam(ip1jmp1),         &
     & unsapolnga1,unsapolnga2,unsapolsga1,unsapolsga2,                 &
     & unsair_gam1(ip1jmp1),unsair_gam2(ip1jmp1),unsairz_gam(ip1jm),    &
     & aivscu2gam(ip1jm),aiuscv2gam(ip1jm),xprimu(iip1),xprimv(iip1)

!
        REAL                                                            &
     & cu,cv,unscu2,unscv2,aire,airesurg,aireu,airev,unsaire,apoln     ,&
     & apols,unsairez,airuscv2,airvscu2,aireij1,aireij2,aireij3,aireij4,&
     & alpha1,alpha2,alpha3,alpha4,alpha1p2,alpha1p4,alpha2p3,alpha3p4 ,&
     & fext,constang,rlatu,rlatv,rlonu,rlonv,cuvscvgam1,cuvscvgam2     ,&
     & cvuscugam1,cvuscugam2,cvscuvgam,cuscvugam,unsapolnga1,unsapolnga2&
     & ,unsapolsga1,unsapolsga2,unsair_gam1,unsair_gam2,unsairz_gam    ,&
     & aivscu2gam ,aiuscv2gam,cuvsurcv,cvsurcuv,cvusurcu,cusurcvu,xprimu&
     & , xprimv
!
!
! $Id: temps.h 1577 2011-10-20 15:06:47Z fairhead $
!
!  ATTENTION!!!!: ce fichier include est compatible format fixe/format libre
!                 veillez  n'utiliser que des ! pour les commentaires
!                 et  bien positionner les & des lignes de continuation
!                 (les placer en colonne 6 et en colonne 73)
!
!
! jD_ref = jour julien de la date de reference (lancement de l'experience)
! hD_ref = "heure" julienne de la date de reference
!-----------------------------------------------------------------------
! INCLUDE 'temps.h'

      COMMON/temps_r/dt,jD_ref,jH_ref,start_time,hour_ini
      COMMON/temps_i/day_ini,day_end,annee_ref,day_ref,                 &
     &             itau_dyn,itau_phy,itaufin
      COMMON/temps_c/calend


      INTEGER   itaufin ! total number of dynamical steps for the run
      INTEGER   itau_dyn, itau_phy
      INTEGER   day_ini ! initial day # of simulation sequence
      INTEGER   day_end ! final day # ; i.e. day # when this simulation ends
      INTEGER   annee_ref
      INTEGER   day_ref
      REAL      dt ! (dynamics) time step (changes if doing Matsuno or LF step)
      REAL      jD_ref, jH_ref, start_time
      CHARACTER (len=10) :: calend

      ! Additionnal Mars stuff:
      real hour_ini ! initial fraction of day of simulation sequence (0=<hour_ini<1)

!-----------------------------------------------------------------------
!
! $Id: ener.h 1447 2010-10-22 16:18:27Z jghattas $
!
!  ATTENTION!!!!: ce fichier include est compatible format fixe/format libre
!                 veillez à n'utiliser que des ! pour les commentaires
!                 et à bien positionner les & des lignes de continuation 
!                 (les placer en colonne 6 et en colonne 73)
!
! INCLUDE 'ener.h'

      COMMON/ener/ang0,etot0,ptot0,ztot0,stot0,                         &
     &            ang,etot,ptot,ztot,stot,rmsdpdt ,                     &
     &            rmsv,gtot(llmm1)

      REAL ang0,etot0,ptot0,ztot0,stot0,                                &
     &     ang,etot,ptot,ztot,stot,rmsdpdt,rmsv,gtot

!-----------------------------------------------------------------------
!
! $Id: logic.h 1520 2011-05-23 11:37:09Z emillour $
!
!
! NB: keep items of different kinds in seperate common blocs to avoid
!     "misaligned commons" issues
!-----------------------------------------------------------------------
! INCLUDE 'logic.h'

      COMMON/logicl/ purmats,forward,leapf,apphys,                      &
     &  statcl,conser,apdiss,apdelq,saison,ecripar,fxyhypb,ysinus       &
     &  ,read_start,ok_guide,ok_strato,tidal,ok_gradsfile               &
     &  ,ok_limit,ok_etat0,hybrid                                       &
     &  ,moyzon_mu,moyzon_ch

      COMMON/logici/ iflag_phys,iflag_trac
      
      LOGICAL purmats,forward,leapf,apphys,statcl,conser,               &
     & apdiss,apdelq,saison,ecripar,fxyhypb,ysinus                      &
     &  ,read_start,ok_guide,ok_strato,tidal,ok_gradsfile               &
     &  ,ok_limit,ok_etat0
      logical hybrid ! vertical coordinate is hybrid if true (sigma otherwise)
                     ! (only used if disvert_type==2)
      logical moyzon_mu,moyzon_ch ! used for zonal averages in Titan

      integer iflag_phys,iflag_trac
!$OMP THREADPRIVATE(/logicl/)
!$OMP THREADPRIVATE(/logici/)
!-----------------------------------------------------------------------
!
! $Header$
!
      character *120 descript
      common /titre/descript
!
! $Header$
!
!c
!c
!c..include serre.h
!c
       REAL clon,clat,transx,transy,alphax,alphay,pxo,pyo,              &
     &  grossismx, grossismy, dzoomx, dzoomy,taux,tauy
       COMMON/serre/clon,clat,transx,transy,alphax,alphay,pxo,pyo ,     &
     &  grossismx, grossismy, dzoomx, dzoomy,taux,tauy
!
! $Header$
!
!
! gestion des impressions de sorties et de débogage
! lunout:    unité du fichier dans lequel se font les sorties 
!                           (par defaut 6, la sortie standard)
! prt_level: niveau d'impression souhaité (0 = minimum)
!
      INTEGER lunout, prt_level
      COMMON /comprint/ lunout, prt_level

C   Arguments
C
      character*(*) infile
      real tstep, t_ops, t_wrt
      integer fileid, filevid,filedid

      write(lunout,*)'initfluxsto_p: Needs IOIPSL to function'
! #endif of #ifdef CPP_IOIPSL
      return
      end