source: trunk/SRC/ToBeReviewed/PLOTS/DESSINE/pltt.pro @ 326

;+
;
; @file_comments
; Trace hovmoeller graphs: xt,yt,zt,t
;
; @categories 
; Graphics
;
; @param TAB {in}{required}
; The field whose we want to make the hovmoeller map can be 2 kind of thing:
;       1) An array which can be:
;          * 3d or 4d: array  'xt','yt','zt','t'. The last component is the time. In this case, the array will
;            pass in <pro>grossemoyenne</pro> to be averaged and become an 1d or 2d array.
;          * 2d: If the array is already 2d, it is not modified (beware, lands must
;            be masked at the value valmask) and nevertheless, type must be specified
;            to we know of which trace it is about.
;            To have a correct caption, respecify the extraction zone via BOXZOOM.
;          * 1d: only for traces of the 't' type. Nevertheless, type must be specified
;            to we know of which trace it is about.
;            To have a correct caption, respecify the  extraction zone via BOXZOOM.
;       2) a structure respecting all criterions specified by <pro>litchamp</pro>
;          See IDL> xhelp,'litchamp'. The array contained in the structure
;          respecting criterions of case 1)
;
; 
; @param GIVENTYPE
;
; @param GIVENMIN
; valeur minimum que l''on veut prendre en compte dans le trace
; des contours. Par defaut on prend le min de tableau (sur les pts mer)
;
; @param GIVENMAX
; valeur maximum que l''on veut prendre en compte dans le trace
; des contours. Par defaut on prend le max de tableau (sur les pts mer)
;
; @param DATMIN
; c''est la borne inf de l''axe temporel. c''est un
;       longinteger de la forme yyyymmdd (ou bien yymmdd).
;
; @param DATMAX
; c''est la borne max de l''axe temporel. c''est un
;       longinteger de la forme yyyymmdd (ou bien yymmdd)
;
; @keyword BOXZOOM
; Vector indicating the geographic zone (3d) on which the extraction of the field must
; be done to do the hovmoeller.
;  If BOXZOOM has :
; 1 element : The extraction is made on [lon1, lon2, lat1, lat2, 0.,boxzoom[0]]
; 2 elements: The extraction is made on [lon1, lon2, lat1, lat2, boxzoom[0],boxzoom[1]]
; 4 elements: The extraction is made on [Boxzoom, vert1, vert2]
; 5 elements: The extraction is made on [Boxzoom[0:3], 0, Boxzoom[4]]
; 6 elements: The extraction is made on Boxzoom
;
; Where lon1, lon2,lat1,lat2,vert1,vert2 are global variables defined at the last 
; <pro>domdef</pro> !
;
; @keyword CONTINTERVALLE
; When CONTOUR is activated, it is the value between 2 isolines
; traced by a trait. So it can be different from the one specified by INTERVALLE which,
; in this case, does not control colored isolines in color anymore. If there is noone
; specified min, we choose a contour min which goes well with the specified interval!
; If this keyword is not specified, we trace 20 isolines from the min to the max.
;
; @keyword CONTLABEL {type=integer}
; When CONTOUR is activated, if n
; is different of 0, choose the label type corresponding to n cases for
; the traced by a traitisolines. To specify the type of label of the
; colored contour, use LABEL
;
; @keyword CONTMAX {default=we take the max of the array passed in the keyword CONTOUR (on ocean points)}
; When CONTOUR is activated, max value we want to consider in the isoline
; traced by a trait's line.
;
; @keyword CONTMIN {default=we take the min of the array passed in the keyword CONTOUR (on ocean points)}
; When CONTOUR is activated, min value we want to consider in the isoline
; traced by a trait's line.
;
; @keyword CONTNLEVEL {default=20}
; When  CONTOUR is activated, it is the number of contours
; traced by a trait for drawing (active if
; CONTLABEL=0).
;
; @keyword CONTOUR
; If we want to trace contours of a different field than the one
; whose we have the colored drawing (by example E-P in color and QSR in contours).
; It must be a field respecting same characteristics than the argument number one of pltt.
;
; @keyword ENDPOINTS
; keyword specifying that we want to make a vertical cut in diagonal. Then coordinated of extremities
; of these one are defined by the 4 elements of the vector ENDPOINTS: [x1,y1,x2,y2] which are
; coordinates.
;
; @keyword EXCHANGE_XY
; Allows to invert axes.
;
; @keyword FILTER
; Apply a slippery average of width FILTER
;
; @keyword INTERVALLE
; Value of an interval between two isolines. If there is none specified min,
; we choose a min contour which goes well with the specified interval!. If this keyword is not
; specified, we trace 20 isoline from the min to the max. Comment: When CONTOUR is activated,
; INTERVALLE only specify the interval between 2 colored isolines. To specify the interval
; between 2 isolines traced by a trait, use CONTINTERVALLE.
;
; @keyword INV
; Invert the color vector used to color the graph
;               (without use the black, the white and the used palette)
;
; @keyword LABEL {type=integer}
; If n different of 0, it choose the label's type
; corresponding to cases n. cf <pro>label</pro>
; Comment: When CONTOUR is activated, it only specify the label's type for colored isolines.
; For these one traced by a trait, use CONTLABEL.
;
; @keyword COL1d
; --OBSOLETE--Color number when we make a trace 1d by default, 0.It is better to use the
; keyword COLOR used by plot.
;
; @keyword MAXIN
; to specify the max value we want to plot with a keyword instead of with the
; input parameter max. If max is defined by both, parameter and keyword, the
; keyword is retained.
;
; @keyword MININ
; to specify the min value we want to plot with a keyword instead of with the
; input parameter min. If min is defined by both, parameter and keyword, the
; keyword is retained.
;
; @keyword NLEVEL {default=20}
; Number of contours to draw. active if
; LABEL=0 or is not specified.
;
; @keyword NOFILL
; To make just isolines with no filling
;
; @keyword CONTNLEVEL {default=20}
; When CONTOUR is activated, it is the number of contours
; traced by a trait for drawing (active if
; CONTLABEL=0).
;
; @keyword OV1D
; Allows to overprint a 1d curve over a precedent 1d drawing.
;
; @keyword OVERPLOT
; To make a plot over an other one.
; Comment: Contrarily to the use of CONTOUR or VECTEUR, the use of this keyword
; does not the caption and/or the color bar.
;
; @keyword STRICTFILL
; Activate this keyword to that the filling of contours be
; precisely done between the min and the max specified. Values inferior/superior at the
; specified min/max are not filled. Note that max values a considered
; as missing values so cells containing one or more corners with
; values above max will have no contours drawn through them.  
;
; @keyword STYLE {default=style=0}
; Contour's style to adopt to draw isolines. See <pro>style</pro> for more informations
;
; @keyword STY1D
; --OBSOLETE--
; Number of the style used when we make a 1d drawing. We should better use the
; keyword LINESTYLE which is tho one of the plot. Beware, this keyword is still
; useful if we want to d bars instead of curves, put sty1d='bar'
;
; @keyword TREND_TYPE
; Modify field by calling <pro>trends</pro>
;
; @keyword TYPEIN
; allows to specify the type of hovmoeller we want to do
;             'xt','yt','zt','t'
; with help of a keyword rather than the argument type. If the argument and the
; keyword are specified in the same time, it is the value specified by the
; keyword which is retained.
;
; @keyword _EXTRA
; Used to pass keywords
;
; @uses
; common.pro
;
; @history
; Sebastien Masson (smasson\@lodyc.jussieu.fr)
;                       27/5/98
;                       Jerome Vialard (adapting plt to hovmoeller drawing)
;                       2/7/98
;                       Sebastien Masson 14/8/98 (continents,barres)
;                       15/1/98
; Adaptation for arrays 3 and 4d to the average be done in pltt rather than during the reading.
;                       Sebastien Masson 14/8/98
;                       7/1999
;                       Eric Guilyardi 29/7/99 FILTER, TREND_TYPE,
;                       REPEAT_C
;                       Sebastien Masson 08/02/2000 checkfield and
;                       usetri keyword.
;
; @version
; $Id$
;
; @todo 
; seb: definition of parameters, L.426 à 427, L. 492 à 493
;
;-
PRO pltt, tab, giventype, givenmin, givenmax, datmin, datmax, BOXZOOM = boxzoom, CONTOUR = contour $
          , ENDPOINTS = endpoints, INTERVALLE = intervalle, INV = inv  $
          , CONTINTERVALLE = contintervalle, LABEL = label, CONTLABEL = contlabel $
          , STYLE = style, CONTMAX = contmax, CONTMIN = contmin $
          , NOFILL = nofill, NLEVEL = nlevel, CONTNLEVEL = contnlevel $
          , COL1D = col1d, STY1D = sty1d, MININ = minin, MAXIN = maxin $
          , OV1D = ov1d, FILTER = filter, TREND_TYPE = trend_type $
          , REPEAT_C = repeat_c, TYPEIN = typein, XT = XT, YT = YT, ZT = zt $
          , TT = tt, STRICTFILL = strictfill, OVERPLOT = overplot $
          , EXCHANGE_XY = exchange_xy $
          , _EXTRA = ex
;
  compile_opt idl2, strictarrsubs
;
@cm_4mesh
@cm_4data
@cm_4cal
  IF NOT keyword_set(key_forgetold) THEN BEGIN
@updatenew
@updatekwd
  ENDIF
;--------------------------------------------------------------
;------------------------------------------------------------
   tempsun = systime(1)         ; For key_performance
;--------------------------------------------------------------
; I2) reinitialization. !p.,!x.,!y.
; Comment: we do not reinitialize when we call back plt in loop to use contour.
;--------------------------------------------------------------
   if n_elements(contour) ne 4 AND NOT keyword_set(overplot) $
    AND NOT keyword_set(ov1d) then reinitplt
;--------------------------------------------------------------
; I1) Reading of the field.
;--------------------------------------------------------------
   if (keyword_set(boxzoom) OR keyword_set(endpoints)) $
     AND n_elements(contour) ne 4 THEN BEGIN
     savedbox = 1b
     saveboxparam, 'boxparam4pltt.dat'
   ENDIF
   if n_elements(giventype) NE 0 then type = giventype
   if n_elements(givenmin) NE 0 then min = givenmin
   if n_elements(givenmax) NE 0 then max = givenmax
   if n_elements(minin) NE 0 then min = minin
   if n_elements(maxin) NE 0 then max = maxin
   if keyword_set(typein) then BEGIN
      if size(type, /type) NE 7 AND size(type, /type) NE 0 then begin
         if n_elements(min) NE 0 then max = min
         min = type
      endif
      type = typein
    ENDIF
;
   checktypeminmax, 'pltt', TYPE = type, MIN = min, MAX = max $
     , XT = XT, YT = YT, ZT = zt, TT = tt, ENDPOINTS = endpoints, _extra = ex
;
   if keyword_set(endpoints) then begin
      section, tab, z2d, glam, gphi, ENDPOINTS = endpoints, TYPE = type $
        , BOXZOOM = boxzoom, DIREC = direc
      nx = n_elements(glam)
      ny = nx
      if strupcase(vargrid) EQ 'W' then begin
         z = gdepw[firstzw:lastzw]
         nz = nzw
      ENDIF ELSE BEGIN
         z = gdept[firstzt:lastzt]
         nz = nzt
      ENDELSE
   ENDIF ELSE BEGIN
      z2d = checkfield(tab, 'pltt', TYPE = type, BOXZOOM = boxzoom $
                       , direc = direc, _extra = ex)
      if n_elements(z2d) EQ 1 AND z2d[0] EQ -1 then BEGIN
        IF keyword_set(savedbox) THEN restoreboxparam, 'boxparam4pltt.dat'
        return
      endif
      grille, mask, glam, gphi, gdep, nx, ny, nz, type = type
   ENDELSE
;---------------------------------------------------------------
; Calculation of trend/anomaly following TREND_TYPE
;---------------------------------------------------------------

   IF NOT keyword_set(trend_type) THEN trend_type = 0

   IF trend_type GT 0 THEN z2d = trends(z2d, trend_type, type)

;---------------------------------------------------------------
; Filtering of fields in the 't' case.
;---------------------------------------------------------------

   IF type EQ 't' AND keyword_set(filter) THEN BEGIN
      ras = report('    Applying a running mean filter of width '+string(filter, format = '(I3)'))
      z2d = smooth(z2d, filter)
      z2d[0:filter/2-1] = 0.
      z2d[(size(z2d))[1]-filter/2-1:(size(z2d))[1]-1] = 0.
   ENDIF

;---------------------------------------------------------------
; Repetition of the temporal series
;---------------------------------------------------------------

   IF NOT keyword_set(repeat_c) THEN repeat_c = 1

   temps = time[0:jpt-1]
   IF repeat_c GT 1 THEN BEGIN
      taille=size(z2d)
      CASE taille[0] OF
         1: z2d = reform(z2d#replicate(1, repeat_c), taille[1]*repeat_c)
         2: BEGIN
            z2d = z2d[*]#replicate(1, repeat_c)
            z2d = reform(z2d, taille[1], taille[2]*repeat_c, /over)
         END
         ELSE:
      ENDCASE
      temps = [temps, (lindgen(jpt*(REPEAT_c-1))+1)*(temps[1]-temps[0])+temps[jpt-1]]
   ENDIF

;---------------------------------------------------------------
; Selection of graphic's type.
;---------------------------------------------------------------
   taille=size(z2d)
   case taille[0] of
      2 : typdes='2d'
      1 : begin
         z1d=z2d
         typdes='1d'
         if keyword_set(OV1D) then begin
            yy = z2d
            if n_elements(datmin) NE 0 then tempsmin = date2jul(datmin) $
            ELSE tempsmin = temps[0]
; on shift l''axe du temps pour des questions de precision sur les
; dates du calendier julien en long qui sont passes en float ds les axes
            xx = temps-tempsmin
            !x.range=!x.range-tempsmin
            !x.tickv=!x.tickv-tempsmin
; We do a false plot to apply these changes!
            plot,[0], [0],/noerase,xstyle=5, ystyle = 5, title = '', subtitle = '', ytitle = '', xtitle = ''
            goto, trace1d
         endif
      end
  endcase
; We build the mask. For that, the table must be masked (automatically done at the
; value valmask if we pass in moyenne or grossemoyenne)
   nan = total(finite(z2d,/nan)) < 1
   if n_elements(valmask) EQ 0 then valmask = 1e20
   if keyword_set(nan) then begin
      notanum = where(finite(z2d) EQ 0)
      z2d[notanum] = 0.
      mask = z2d LT valmask/10.
      z2d[notanum] = !values.f_nan
   ENDIF ELSE mask = z2d LT valmask/10.
;----------------------------------------------------------------------------
;   determination du mi:min et du ma:max de z2d ainsi que de max: max et
;    min: min pour le dessin.
;-----------------------------------------------------------------------------
; Do we need to do an autoscale ???
   autoscale = testvar(var = min) EQ testvar(var = max) AND NOT keyword_set(intervalle)
   determineminmax, z2d, mask, mi, ma, MININ = min, MAXIN = max, nan = nan, INTERVALLE = intervalle, _extra = ex
   if n_elements(z2d) EQ 1 AND z2d[0] EQ -1 THEN return
; We do an autoscale if needed.
   if autoscale then autoscale, min, max, intervalle
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
   if n_elements(contour) ne 4  AND NOT keyword_set(overplot) THEN $
    placedessin, 'pltt',posfenetre, posbar, contour = contour, direc = direc, type = type, endpoints = endpoints, _extra = ex
;--------------------------------------------------------------
;--------------------------------------------------------------
; 2nd part: drawing
;--------------------------------------------------------------
;-----------------------------------------------------------
;   definition of axis
;----------------------------------------------------------
;-----------------------------------------------------------------------------
; definition of the abscisse and ordinate vectors.
; The triangulation is defined in order to the drawing be done from the
; left bottom to the right up. So the matrix have to be shown like this,
; from which some transpose and reverse
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
; definition of limits of the temporal axis
;-----------------------------------------------------------------------------
   case N_PARAMS() OF
      5 : begin
         tempsmin = date2jul(datmin)
         tempsmax = temps[(jpt*repeat_c)-1]
      end
      6 : begin
         tempsmin = date2jul(datmin)
         tempsmax = date2jul(datmax)
      end
      else : begin
         tempsmin = temps[0]
         tempsmax = temps[(jpt*repeat_c)-1]
      end
   endcase
;-----------------------------------------------------------------------------
; on shift l''axe du temps pour des questions de precision sur les
; dates du calendier julien en long qui sont passes en float ds les axes
   case typdes of
      '1d' : begin
         yy = z1d
         xx = temps-tempsmin
      end
      '2d' : begin
         case 1 of
            type eq 'xt' : BEGIN
               xx = glam[*, 0]
               yy = temps-tempsmin
            end
            type eq 'yt' : begin
               IF (size(gphi))[0] EQ 1 then yy = gphi ELSE BEGIN
                 IF keyword_set(key_irregular) THEN BEGIN
                   cln = (where(gphi EQ max(gphi)))[0]
                   yy = reform(gphi[cln MOD nx, *])
                 ENDIF ELSE yy = reform(gphi[0, *])
               ENDELSE
               xx = temps-tempsmin
               z2d = transpose(z2d)
               mask = transpose(mask)
            end
            type eq 'zt' : begin
               IF size(gdep, /n_dimensions) EQ 2 THEN $
                  yy = transpose(gdep) ELSE yy = gdep
               xx = temps-tempsmin
               z2d = transpose(z2d)
               mask = transpose(mask)
            end
         endcase
      end
   endcase
;--------------------------------------------------------------
   if NOT keyword_set(overplot) THEN axe, type, tempsmin, tempsmax, _EXTRA = ex ELSE BEGIN
      if type EQ 'xt' then BEGIN
         !y.range=!y.range-tempsmin
         !y.tickv=!y.tickv-tempsmin
      ENDIF ELSE BEGIN
         !x.range=!x.range-tempsmin
         !x.tickv=!x.tickv-tempsmin
      ENDELSE
   ENDELSE
;------------------------------------------------------------
;------------------------------------------------------------
; drawing
;------------------------------------------------------------
; 2d
;------------------------------------------------------------
   if (typdes eq '2d') then begin
;--------------------------------------------------------------
; choice of labels
;-----------------------------------------------------------
      if keyword_set(intervalle) AND NOT keyword_set(label) then label=1
      if keyword_set(label) eq 0 then cas=0 else cas=label
      label, cas, min, max, ncontour, level_z2d, colnumb, NLEVEL = nlevel $
             , INTERVALLE = intervalle, strictfill = strictfill
;--------------------------------------------------------------
; choice of style
;-----------------------------------------------------------
      if not keyword_set(style) then style=0
      style,style,level_z2d,linestyle,thick
      if keyword_set(inv) then colnumb=reverse(colnumb)
;----------------------------------------------------------------------
      nby = n_elements(yy)
      nbx = n_elements(xx)
;
      if keyword_set(nan) then BEGIN
;         xx = xx#replicate(1, nby) ; We make a 2d array with axes
;         yy = replicate(1, nbx)#yy
         masknan = finite(z2d)
         IF NOT keyword_set(nofill) THEN z2d[where(masknan EQ 0)] = max
         mask = temporary(mask)*temporary(masknan)
       ENDIF
      usetri = 0 ; default definition
      IF keyword_set(strictfill) THEN BEGIN
        tmp = z2d ge max
        tmp = 1b - byte(extrapolate(tmp, tmp, 1))
        key_save = key_periodic & key_periodic = 0
        trifield = triangule(temporary(tmp)*mask, coinmonte = coinmontemaskaa $
                             , coindescend = coindescendmaskaa, keep_cont = 0)
        key_periodic = key_save
        usetri = 2
      ENDIF
      z2d = remplit(z2d,nite=2+keyword_set(nan), mask = mask, /basique, _extra=ex)
      if NOT keyword_set(strictfill) then z2d = min > z2d <  max
      if keyword_set(nan) then BEGIN
        triangulation = triangule(mask, /basic, coinmonte = coinmontemask $
                                  , coindescend = coindescendmask)
        usetri = 1
      ENDIF ELSE triangulation = -1
      IF size(gdep, /n_dimensions) EQ 2 THEN BEGIN
        usetri = 2
        IF triangulation[0] EQ -1 THEN $
           triangulation = triangule(mask, /basic, coinmonte = coinmontemask $
                                     , coindescend = coindescendmask)
      ENDIF
      IF NOT keyword_set(strictfill) THEN trifield = triangulation
;----------------------------------------------------------------------
      pltbase, z2d, xx, yy, mask, xx, yy, level_z2d, colnumb, contour = contour, /noerase $
       , c_linestyle=linestyle,c_labels=1-(indgen(n_elements(level_z2d)) MOD 2) $
       , trichamp = trifield, trimsk = triangulation, overplot = overplot $
       , c_thick=thick, performance = key_performance, nofill = nofill, usetri = usetri $
       , coinmontemask=coinmontemask, coindescendmask=coindescendmask, _extra = ex
;------------------------------------------------------------
      if n_elements(contour) eq 4 then BEGIN ; it is the second time I pass in pltt
         contour = {mietma:[mi, ma], unit:varunit, inter:intervalle} ; I send back the min, the max and the unity
         return
      endif
;------------------------------------------------------------
      if keyword_set(contour) then BEGIN
         pourlegende = [1, 1, 1, 1]
         oldattributs = saveatt()
         oldcolnumb = colnumb
         pltt,contour,type, contmin,contmax,CONTOUR=pourlegende, /noerase, USETRI = usetri $
          ,INTERVALLE=contintervalle,LABEL=contlabel,STYLE=style, ENDPOINTS = endpoints $
           , NLEVEL = contnlevel, BOXZOOM = boxzoom, STRICTFILL = strictfill, _extra = ex
         colnumb = oldcolnumb
         restoreatt, oldattributs
      endif
;----------------------------------------------------------------------
;----------------------------------------------------------------------
      if keyword_set(overplot) then GOTO, fini
;------------------------------------------------------------
; Trace the line of change of date and the equator.
;------------------------------------------------------------
      IF key_onearth THEN BEGIN
        CASE type OF
          'xt':oplot, [180, 180] - 360*(!x.range[1] LT 180), !y.range
          'yt':oplot, !x.range, [0, 0]
          ELSE:
        ENDCASE
      ENDIF
;------------------------------------------------------------
;  caption + display of these.
;------------------------------------------------------------
      legende,mi,ma,type, CONTOUR = pourlegende, DIREC = direc, INTERVALLE = intervalle $
       , ENDPOINTS = endpoints, _extra = ex
;
; we want to draw the time axis with tick length = 1. if we simply
; use [xy]style=1 then each axis (up and down or left and right) have
; majorticks with a length of 1 (-> not very nice when xgridstyle=2),
; same if xticklen=0.5 (not very nice in the middle). => so we draw
; the top (right) axis by hand using axis.
;
      if n_elements(ex) NE 0 then BEGIN
; pour avoir un cadre de la couleur noire
        if (where(tag_names(ex) EQ 'COLOR'))[0] NE -1 then ex.COLOR = 0
      ENDIF
;
      plot, [0], [0], /nodata, /noerase, _extra = ex $
        , xstyle = 1+4*(keyword_set(endpoints) AND type EQ 'xt' AND lat1 NE lat2)+8*(type EQ 'yt' OR type EQ 'zt') $
        , ystyle = 1+4*(keyword_set(endpoints) AND type EQ 'yt')+8*(type EQ 'xt')
; call axis for the missing axis.
      IF type EQ 'xt' AND NOT keyword_set(endpoints) THEN BEGIN
        if n_elements(ex) NE 0 then $
          if (where(tag_names(ex) EQ 'YTICKNAME'))[0] NE -1 then $
          ex.YTICKNAME = replicate(' ', n_elements(ex.YTICKNAME))
        axis, yaxis = 1, ystyle = 1, yticklen = 0 $
          , ytickname = replicate(' ', !y.ticks+1), _extra = ex
      ENDIF
      IF (type EQ 'yt' OR type EQ 'zt') AND NOT keyword_set(endpoints) THEN BEGIN
        if n_elements(ex) NE 0 then $
          if (where(tag_names(ex) EQ 'XTICKNAME'))[0] NE -1 then $
          ex.XTICKNAME = replicate(' ', n_elements(ex.XTICKNAME))
       axis, xaxis = 1, xstyle = 1, xticklen = 0 $
        , xtickname = replicate(' ', !x.ticks+1), _extra = ex
      ENDIF
; ajout d'un axe ds le cas ou l'on utilise endpoints
      if keyword_set(endpoints) then addaxe, endpoints, type, posfenetre, _EXTRA = ex
;------------------------------------------------------------
; color bar
;------------------------------------------------------------
      colnumb = colnumb[0:ncontour-1-keyword_set(strictfill)]
      barrecouleur, colnumb, min,  max, (ncontour-keyword_set(strictfill))/2 $
                    , position = posbar, _extra = ex
;------------------------------------------------------------
   endif
;------------------------------------------------------------
; 1d
;------------------------------------------------------------
trace1d:
   if (typdes eq '1d') then begin
      if (not keyword_set(col1d)) then col1d = 0
      if keyword_set(sty1d) then BEGIN ;if we want to make bars
         IF strlowcase(strtrim(sty1d)) EQ 'bar' then begin
            !y.range = [!y.range[0]-(!y.range[1]-!y.range[0])*.05,!y.range[1]]
            bar_plot, yy, background = (!d.n_colors-1) < 255,  $
             baselines = replicate(!y.range[0], n_elements(yy)), barnames = ['', ''], $
             colors    = replicate(col1d, n_elements(yy)), /outline
            if n_elements(ex) NE 0 then BEGIN
; To have a black frame
              if (where(tag_names(ex) EQ 'COLOR'))[0] NE -1 then ex.COLOR = 0
            ENDIF
            plot, [0], [0], /nodata, /noerase, _extra = ex
            GOTO, fini
         ENDIF
      ENDIF
      if NOT keyword_set(ov1d) then BEGIN
         !y.range=[min-abs(max-min)/50.,max+abs(max-min)/50.]
         legende,mi,ma,type, DIREC = direc, _extra = ex
;
         if keyword_set(exchange_xy) then begin
            rien = !x
            !x = !y
            !y = rien
            rien = xx
            xx = yy
            yy = rien
         endif
         plot, xx, yy, color = col1d, linestyle = sty1d, thick = 2 $
           , title = '', subtitle = '', _extra = ex
; draw 0 line
         if keyword_set(exchange_xy) then $
           oplot, [0, 0], !y.range ELSE oplot, !x.range, [0, 0]
; we want to draw the axis with the time axis length = 1. if we simply
; use xstyle=1 then each axis (up and down) have majorticks with a
; length of 1 (-> not very nice when xgridstyle=2), same if
; xticklen=0.5 (not very nice in the middle).
; => so we draw the top axis by hand using axis.
         if n_elements(ex) NE 0 then BEGIN
; To have a black frame
            if (where(tag_names(ex) EQ 'COLOR'))[0] NE -1 then ex.COLOR = 0
         ENDIF
         plot, [0], [0], /nodata, /noerase $
           , xstyle = 1+8*(1-keyword_set(exchange_xy)) $
           , ystyle = 1+8*keyword_set(exchange_xy), _extra = ex
; call axis for the missing axis.
         if n_elements(ex) NE 0 then BEGIN
; force tickname to blank array
            if (where(tag_names(ex) EQ 'YTICKNAME'))[0] NE -1 AND keyword_set(exchange_xy) then ex.YTICKNAME = replicate(' ', n_elements(ex.YTICKNAME))
            if (where(tag_names(ex) EQ 'XTICKNAME'))[0] NE -1 AND NOT keyword_set(exchange_xy) then ex.XTICKNAME = replicate(' ', n_elements(ex.XTICKNAME))
         ENDIF
         if keyword_set(exchange_xy) then  axis, yaxis = 1, ystyle = 1 $
           , yticklen = 0, ytickname = replicate(' ', !y.ticks+1), _extra = ex $
         ELSE axis, xaxis = 1, xstyle = 1, xticklen = 0 $
           , xtickname = replicate(' ', !x.ticks+1), _extra = ex
       ENDIF ELSE oplot, xx, yy, color = col1d, linestyle = sty1d, thick = 2, _extra = ex
   endif
fini:
;------------------------------------------------------------
; we reput time axis in IDL julian days and not in julian days count from tempsmin
;------------------------------------------------------------
   if type EQ 'xt' then BEGIN
      !y.range=!y.range+tempsmin
      !y.tickv=!y.tickv+tempsmin
   ENDIF ELSE BEGIN
      !x.range=!x.range+tempsmin
      !x.tickv=!x.tickv+tempsmin
   ENDELSE
; We do a false plot to these values are considerated
   plot, [0], [0], /nodata, /noerase, xstyle = 5, ystyle = 5 $
     , title = '', subtitle = '', ytitle = '', xtitle = ''
;------------------------------------------------------------
;------------------------------------------------------------
; 3rd part: possible print
;------------------------------------------------------------
;------------------------------------------------------------
   terminedessin, _extra = ex
   if keyword_set(savedbox) THEN restoreboxparam, 'boxparam4pltt.dat'
;------------------------------------------------------------
   if n_elements(key_performance) NE 0 then $
    IF key_performance EQ 1 THEN print, 'temps pltt', systime(1)-tempsun
;------------------------------------------------------------
;------------------------------------------------------------
;------------------------------------------------------------
   return
end