Changes between Version 126 and Version 127 of DevelopmentActivities/ORCHIDEE-DOFOCO

Timestamp:

2017-06-20T16:22:52+02:00 (7 years ago)

Author:

luyssaert

Comment:

--

DevelopmentActivities/ORCHIDEE-DOFOCO

@@ -172 +172 @@
 === Consistency checks ===
 The code distinguishes between three options to check for mass balance problems. These options are controlled by the parameter '''ERR_ACT'''. Always use ERR_ACT = 3 when developing and testing the code. Note that in addition to checking for mass balance closure ORCHIDEE-CN-CAN will also check for the preservation of veget_max. This is useful to make sure no surface area is lost when moving biomass from one PFT to another following natural disturbances, forest management, land cover changes and when using age classes. In some parts of the code, for example, modules that deal with disturbances, it is assumed that the tallest trees are stored in the last diameter class. When the difference in diameter between diameter classes becomes very small, this assumption could be violated. Therefore, the diameter classes are sorted to enforce the assumed order and where needed the order is checked.
- 
-(1)ERR_ACT = 1 is recommended when running global long-term simulations. Under this option, mass balance closure is checked for all biogeochemical processes but only at the highest level thus stomate.f90 and stomate_lpj.f90. Although the mass balance checks are not very expensive in terms of computer time, skipping the numerous lower level checks is expected to save some time. Under this option the mass balance error is only written to the history file. No information is provided in which subroutine the problem occurred. 
-(2)ERR_ACT = 2 is recommended when developing and testing the model. Now the mass balance is explicitly checked in stomate.f90, stomate_lpj.f90 and all its subroutines. Under this option the mass balance error is written to the history file and if the mass balance is not closed, the warning message will indicate in which subroutine the problem likely originated.
-(3)ERR_ACT = 3 is recommended when having a problem with mass balance closure. The mass balance is explicitly checked in stomate.f90, stomate_lpj.f90 and all its subroutines. If a mass balance occurs, the model is stopped.
+
+1 - ERR_ACT = 1 is recommended when running global long-term simulations. Under this option, mass balance closure is checked for all biogeochemical processes but only at the highest level thus stomate.f90 and stomate_lpj.f90. Although the mass balance checks are not very expensive in terms of computer time, skipping the numerous lower level checks is expected to save some time. Under this option the mass balance error is only written to the history file. No information is provided in which subroutine the problem occurred.
+
+2 - ERR_ACT = 2 is recommended when developing and testing the model. Now the mass balance is explicitly checked in stomate.f90, stomate_lpj.f90 and all its subroutines. Under this option the mass balance error is written to the history file and if the mass balance is not closed, the warning message will indicate in which subroutine the problem likely originated.
+
+3 - ERR_ACT = 3 is recommended when having a problem with mass balance closure. The mass balance is explicitly checked in stomate.f90, stomate_lpj.f90 and all its subroutines. If a mass balance occurs, the model is stopped.
 
 === Nitrogen cycle ===