Index: unk/libIGCM/libIGCM_sys/libIGCM_sys_brodie.ksh
===================================================================
--- /trunk/libIGCM/libIGCM_sys/libIGCM_sys_brodie.ksh	(revision 723)
+++ 	(revision )
@@ -1,1163 +1,0 @@
-#!/bin/ksh
-
-#**************************************************************
-# Author: Sébastien Denvil
-# Contact: sebastien.denvil__at__ipsl.jussieu.fr
-# $Revision::                                          $ Revision of last commit
-# $Author::                                            $ Author of last commit
-# $Date::                                              $ Date of last commit
-# IPSL (2006)
-#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
-#
-#**************************************************************
-
-#=========================================================
-# The documentation of this file can be automatically generated
-# if you use the prefix #D- for comments to be extracted. 
-# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
-#=========================================================
-
-#D-#=================================================
-#D-LibIGCM_sys for Brodie SX8
-#D-#=================================================
-#D-
-#D- This ksh library if a layer under some usefull 
-#D-environment variables and shell commands.
-#D-All those definitions depend on host particularities.
-#D-It manages a stack mechanism and test validity of operations.
-#D-All function described bellow must be prefixed by IGCM_sys.
-
-#====================================================
-# libIGCM_sys PARAMETERS
-#====================================================
-
-#====================================================
-# set DEBUG_sys to true to output calls of function
-typeset -r DEBUG_sys=${DEBUG_sys:=true}
-
-#====================================================
-# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
-typeset -r DRYRUN=${DRYRUN:=0}
-
-# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
-# -------------------------------------------------------------------------------------
-# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
-# |          |  Cp/Exe param files |            |  Chmod  |                           |
-# |          |      Qsub           |            |         |                           |
-# -------------------------------------------------------------------------------------
-# |    0     |       yes           |    yes     |  yes    |      yes                  |
-# -------------------------------------------------------------------------------------
-# |    1     |       yes           |    yes     |  yes    |      no                   |
-# -------------------------------------------------------------------------------------
-# |    2     |       yes           |    yes     |  no     |      no                   |
-# -------------------------------------------------------------------------------------
-# |    3     |       yes           |    no      |  no     |      no                   |
-# -------------------------------------------------------------------------------------
-
-#=====================================================
-# Global Variables :
-#=====================================================
-# Language : "fr" or "en"
-typeset -r MYLANG="fr"
-
-#=====================================================
-# Host and user names 
-# $hostname ou hostname
-typeset  HOST=${HOST:=$( hostname )}
-# $username ou whoami
-typeset  LOGIN=${LOGIN:=$( whoami )}
-# $hostname of the MASTER job
-typeset -r MASTER=brodie
-
-#D-
-#D-#==================================================
-#D-Program used in libIGCM
-#D-#==================================================
-
-# rsync with path
-typeset -r RSYNC=/home/rech/ces/rces452/RSYNC_SX8/bin/rsync
-# RSYNC_opt args to rsync
-typeset -r RSYNC_opt="-va"
-# ie storage filesystem
-typeset -r RHOST=gaya
-typeset -r REMOTE_RSYNC=/u/rech/ces/rces452/RSYNC/bin/rsync
-
-#====================================================
-# Host specific DIRECTORIES
-#====================================================
-
-#====================================================
-#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
-typeset -r R_EXE="${MODIPSL}/bin"
-
-#====================================================
-#- SUBMIT_DIR : submission dir
-typeset SUBMIT_DIR=${SUBMIT_DIR:=${PBS_O_WORKDIR}}
-
-#====================================================
-#- ARCHIVE
-typeset -r ARCHIVE=$( rsh gaya -n env | grep PWD | gawk "-F=" '{print $2}' )
-
-#====================================================
-#- Mirror libIGCM from brodie to ulam 
-typeset -r MirrorlibIGCM=${MirrorlibIGCM:=true}
-
-#====================================================
-#- libIGCM_POST
-PATHlibIGCM=$( echo ${libIGCM} | gawk -F"${LOGIN}/" '{print $2}' | sed -e "s&/libIGCM&&" )
-typeset -r libIGCM_POST=${HOME}/MIRROR/${PATHlibIGCM}/libIGCM
-
-#====================================================
-#- IN
-typeset -r R_IN=${R_IN:=/u/rech/psl/rpsl035/IGCM}
-typeset -r R_IN_ECMWF=${R_IN_ECMWF:=/u/rech/psl/rpsl376}
-
-#====================================================
-#- OUT
-typeset -r R_OUT=${ARCHIVE}/IGCM_OUT
-
-#====================================================
-#- OUT_POST 
-typeset -r R_OUT_POST=$( rsh ulam -n echo $WORKDIR | gawk "-F=" "{print $2}" )/IGCM_OUT 
-
-#====================================================
-#- RUN_DIR_PATH : Temporary working directory (=> TMP)
-typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${TMPDIR}}
-
-#====================================================
-#- BIG_DIR : BIG_DIR to store files waiting for rebuild
-typeset -r BIG_DIR=${BIG_DIR:=${WORKDIR}/REBUILD}
-
-#====================================================
-#- HOST_MPIRUN_COMMAND
-typeset -r HOST_MPIRUN_COMMAND=${HOST_MPIRUN_COMMAND:="mpirun"}
-
-#====================================================
-#- Max number of arguments passed to nco operator or demigration command
-UNIX_MAX_LIMIT=360
-
-#D-#==================================================
-#D-function IGCM_sys_RshArchive
-#D-* Purpose: Archive rsh command
-#D-* Examples:
-#D-
-function IGCM_sys_RshArchive {
-    IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
-    rsh gaya exec /bin/ksh <<-EOF
-    ${@}
-EOF
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_RshArchive : erreur."
-	IGCM_debug_Exit "IGCM_sys_RshArchive"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_RshArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_RshPost
-#D-* Purpose: Post-process rsh command
-#D-* Examples:
-#D-
-function IGCM_sys_RshPost {
-    IGCM_debug_PushStack "IGCM_sys_RshPost" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_RshPost :" $@
-    fi
-
-    # keep standard input to keep it for postpone if ulam don't answer
-    cat >/tmp/tmp_IGCM_sys_RshPost_$$
-
-    ## Add submission for old postponed files only if command is a Qsub
-    ##
-    ISITQSUB=0
-    grep Qsub /tmp/tmp_IGCM_sys_RshPost_$$ >/dev/null 2>&1 && ISITQSUB=1
-    if  ( [ ${ISITQSUB} -gt 0 ] ) ; then
-      if [ -d ${SUBMIT_DIR}/POSTPONE ] ; then
-            for postponed_file in ${SUBMIT_DIR}/POSTPONE/* ; do
-              if [ -f ${postponed_file} ] ; then
-                IGCM_debug_Print 2 " submit postponed file : " ${postponed_file}
-                rsh ulam exec /bin/ksh <${postponed_file}
-                if [ $? -eq 0 ] ; then
-                     IGCM_sys_Rm ${postponed_file}
-                else
-                     IGCM_debug_Print 2 "keep postponed file for an other submission :" ${postponed_file}
-                fi
-              fi
-          done
-      fi
-    fi
-
-    RETURN=0
-    # rsh ulam command
-    rsh ulam exec /bin/ksh </tmp/tmp_IGCM_sys_RshPost_$$
-    RETURN=$?
-
-    # keep standard input for postpone if ulam don't answer
-    if ( [ ${RETURN} -gt 0 ] ) ; then
-        IGCM_debug_Print 2 "Postpone tmp_IGCM_sys_RshPost_$$"
-        [ -d ${SUBMIT_DIR}/POSTPONE ] || mkdir ${SUBMIT_DIR}/POSTPONE
-        mv /tmp/tmp_IGCM_sys_RshPost_$$ ${SUBMIT_DIR}/POSTPONE
-    fi
-    IGCM_debug_PopStack "IGCM_sys_RshPost"
-
-}
-
-#D-#==================================================
-#D-function IGCM_sys_SendMail
-#D-* Purpose: Send mail when simulation is over
-#D-* Examples:
-#D-
-function IGCM_sys_SendMail {
-    IGCM_debug_PushStack "IGCM_sys_SendMail" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_SendMail :" $@
-    fi
-
-    if ( ${ExitFlag} ) ; then
-	status=failed
-    else
-	status=completed
-    fi
-    cat  << END_MAIL > job_end.mail
-Dear ${LOGIN},
-
-  Simulation ${config_UserChoices_JobName} is ${status} on supercomputer `hostname`.
-  Job started : ${DateBegin}
-  Job ended   : ${DateEnd}
-  Output files are available in ${R_SAVE}
-  Script files, Script Outputs and Debug files (if necessary) are available in ${SUBMIT_DIR}
-END_MAIL
-
-    if [ X${config_UserChoices_MailName} != X ] ; then
-        mailx -s "${config_UserChoices_JobName} ${status}" ${config_UserChoices_MailName} <  job_end.mail
-    elif [ -f ~/.forward ] ; then
-        mailx -s "${config_UserChoices_JobName} ${status}" $( cat ~/.forward ) < job_end.mail
-    else
-        mailx -s "${config_UserChoices_JobName} ${status}" ${USER} < job_end.mail
-    fi
-
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_SendMail : erreur."
-	IGCM_debug_Exit "IGCM_sys_SendMail"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_SendMail"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Mkdir
-#D-* Purpose: Master locale mkdir command
-#D-* Examples:
-#D-
-function IGCM_sys_Mkdir {
-    IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Mkdir :" $@
-    fi
-    if [ ! -d ${1} ]; then
-	\mkdir -p $1
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_Mkdir : erreur."
-	    IGCM_debug_Exit "IGCM_sys_Mkdir"
-	fi
-    fi
-    # vérification :
-    if [ ! -d ${1} ] ; then
-	echo "IGCM_sys_Mkdir : erreur."
-	IGCM_debug_Exit "IGCM_sys_Mkdir"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Mkdir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_MkdirArchive
-#D-* Purpose: Mkdir on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_MkdirArchive {
-    IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_MkdirArchive :" $@
-    fi
-    #- creation de repertoire sur le serveur fichier
-    rsh gaya -n mkdir -p $1
-
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_MkdirArchive : erreur."
-	IGCM_debug_Exit "IGCM_sys_MkdirArchive"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_MkdirWork
-#D-* Purpose: Mkdir on Work
-#D-* Examples:
-#D-
-function IGCM_sys_MkdirWork {
-    IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_MkdirWork :" $@
-    fi
-    #- creation de repertoire sur le serveur fichier
-    if [ ! -d ${1} ]; then 
-	\mkdir -p $1
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_MkdirWork : erreur."
-	    IGCM_debug_Exit "IGCM_sys_MkdirWork"
-	fi
-    fi
-    IGCM_debug_PopStack "IGCM_sys_MkdirWork"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Cd
-#D-* Purpose: master cd command
-#D-* Examples:
-#D-
-function IGCM_sys_Cd {
-    IGCM_debug_PushStack "IGCM_sys_Cd" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Cd :" $@
-    fi
-    \cd $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_Cd : erreur."
-	IGCM_debug_Exit "IGCM_sys_Cd"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Cd"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Chmod
-#D-* Purpose: Chmod
-#D-* Examples:
-#D-
-function IGCM_sys_Chmod {
-    IGCM_debug_PushStack "IGCM_sys_Chmod" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Chmod :" $@
-    fi
-    if [ $DRYRUN -le 1 ]; then
-	\chmod $@
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_Chmod : erreur."
-	    IGCM_debug_Exit "IGCM_sys_Chmod"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Chmod"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_FileSize
-#D-* Purpose: Filesize
-#D-* Examples:
-#D-
-function IGCM_sys_FileSize {
-    IGCM_debug_PushStack "IGCM_sys_FileSize" $@
-
-    typeset sizeF
-    set +A sizeF -- $( ls -la ${1} )
-    if [ $? -gt 0 ] ; then
-	IGCM_debug_Exit "IGCM_sys_FileSize"
-    fi
-    eval ${2}=${sizeF[4]}
-
-    IGCM_debug_PopStack "IGCM_sys_FileSize"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestDir
-#D-* Purpose: Test Directory that must exists
-#D-* Examples:
-#D-
-function IGCM_sys_TestDir {
-    IGCM_debug_PushStack "IGCM_sys_TestDir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_TestDir :" $@
-    fi
-    typeset ExistFlag
-    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
-    IGCM_debug_PopStack "IGCM_sys_TestDir"
-
-    return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestDirArchive
-#D-* Purpose: Test Directory that must exists on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_TestDirArchive {
-    IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_TestDirArchive :" $@
-    fi
-    typeset ExistFlag
-    ExistFlag=$( IGCM_sys_RshArchive "[ -d $1 ] && echo 0 || echo 1" )
-    IGCM_debug_PopStack "IGCM_sys_TestDirArchive"
-
-    return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestFileArchive
-#D-* Purpose: Test file that must NOT EXISTS on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_TestFileArchive {
-    IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
-    typeset ExistFlag
-    ExistFlag=$( IGCM_sys_RshArchive "[ -f $1 ] && echo 0 || echo 1" )
-    IGCM_debug_PopStack "IGCM_sys_TestFileArchive"
-
-    return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_CountFileArchive
-#D-* Purpose: Count files on Archive filesystem
-#D-* Examples:
-#D-
-function IGCM_sys_CountFileArchive {
-    IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
-    IGCM_sys_RshArchive "ls ${@} 2>/dev/null | wc -l"
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_CountFileArchive : erreur."
-    fi
-    IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Tree
-#D-* Purpose: Tree directories with files on ${ARCHIVE}
-#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
-#D-
-function IGCM_sys_Tree {
-    IGCM_debug_PushStack "IGCM_sys_Tree" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Tree :" $@
-    fi
-
-    \mfls -r $@
-
-    IGCM_debug_PopStack "IGCM_sys_Tree"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Tar
-#D-* Purpose: master un-tar command
-#D-* Examples:
-#D-
-function IGCM_sys_Tar {
-    IGCM_debug_PushStack "IGCM_sys_Tar" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Tar :" $@
-    fi
-    \tar xvf $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_Tar : erreur."
-	IGCM_debug_Exit "IGCM_sys_Tar"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Tar"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_UnTar
-#D-* Purpose: master un-tar command
-#D-* Examples:
-#D-
-function IGCM_sys_UnTar {
-    IGCM_debug_PushStack "IGCM_sys_UnTar" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_UnTar :" $@
-    fi
-    \tar xvf $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_UnTar : erreur."
-	IGCM_debug_Exit "IGCM_sys_UnTar"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_UnTar"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Qsub
-#D-* Purpose: Qsub new job
-#D-* Examples:
-#D-
-function IGCM_sys_Qsub {
-    IGCM_debug_PushStack "IGCM_sys_Qsub" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Qsub :" $@
-    fi
-    /usr/bin/nqsII/qsub -o ${Script_Output} -N ${config_UserChoices_JobName}.${CumulPeriod} < $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_Qsub : erreur -o ${Script_Output} -N ${config_UserChoices_JobName}.${CumulPeriod} $@."
-	IGCM_debug_Exit "IGCM_sys_Qsub"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Qsub"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_QsubPost
-#D-* Purpose: Qsub new job on scalaire
-#D-* Examples:
-#D-
-function IGCM_sys_QsubPost {
-    IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_QsubPost :" $@
-    fi
-    cd ${POST_DIR}
-    /opt/ibmll/LoadL/full/bin/llsubmit ${libIGCM_POST}/$1.job
-    cd -
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_QsubPost : erreur " $@
-	IGCM_debug_Exit "IGCM_sys_QsubPost"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_QsubPost"
-}
-
-#D-*************************
-#D- File transfer functions 
-#D-*************************
-#D-
-
-#D-#==================================================
-#D-function IGCM_sys_Rsync_out
-#D-* Purpose: treat return val of rsync
-#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
-#D-  Error values and explanations can depend on your system version.
-function IGCM_sys_Rsync_out {
-    RET=$1
-    if [ ! $RET ] ; then
-	echo "rsync error !"
-    fi
-
-    if [ $MYLANG = "fr" ]; then
-	case $RET in
-	    0)  return ;;
-	    1)  echo "Erreur de rsync ; RERR_SYNTAX : "
-		echo "Erreur de syntaxe ou d'utilisation."
-		return;;
-	    2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
-		echo "Incompatibilité de protocole."
-		return;;
-	    3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
-		echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
-		echo "répertoires"
-		return;;
-	    4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
-		echo "Action demandée non supportée : une tentative de manipulation de"
-		echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
-		echo "été faite ; ou une option qui est supportée par le  client  mais"
-		echo "pas par le serveur a été spécifiée."
-		return;;
-	    10) echo "Erreur de rsync ; RERR_SOCKETIO"
-		echo "Erreur dans le socket d'entrée sortie"
-		return;;
-	    11) echo "Erreur de rsync ; RERR_FILEIO"
-		echo "Erreur d'entrée sortie fichier"
-		return;;
-	    12) echo "Erreur de rsync ; RERR_STREAMIO"
-		echo "Erreur dans flux de donnée du protocole rsync"
-		return;;
-	    13) echo "Erreur de rsync ; RERR_MESSAGEIO"
-		echo "Erreur avec les diagnostics du programme"
-		return;;
-	    14) echo "Erreur de rsync ; RERR_IPC"
-		echo "Erreur dans le code IPC"
-		return;;
-	    20) echo "Erreur de rsync ; RERR_SIGNAL"
-		echo "SIGUSR1 ou SIGINT reçu"
-		return;;
-	    21) echo "Erreur de rsync ; RERR_WAITCHILD"
-		echo "Une erreur retournée par waitpid()"
-		return;;
-	    22) echo "Erreur de rsync ; RERR_MALLOC"
-		echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
-		return;;
-	    23) echo ""
-                echo "Erreur fichier inexistant"
-		return;;
-	    30) echo "Erreur de rsync ; RERR_TIMEOUT"
-		echo "Temps d'attente écoulé dans l'envoi/réception de données"
-		return;;
-	    *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
-		return;;
-	esac
-    elif [ $MYLANG = "en" ] ; then
-	case $RET in
-	    0)  return;;		
-	    1)  echo "rsync error : Syntax or usage error "
-		return;;
-	    2)  echo "rsync error : Protocol incompatibility "
-		return;;
-	    3)  echo "rsync error : Errors selecting input/output files, dirs"
-		return;;
-	    4)  echo "rsync error : Requested action not supported: an attempt"
-		echo "was made to manipulate 64-bit files on a platform that cannot support"
-		echo "them; or an option was specified that is supported by the client and"
-		echo "not by the server."
-		return;;
-	    5)  echo "rsync error : Error starting client-server protocol"
-		return;;
-	    10) echo "rsync error : Error in socket I/O "
-		return;;
-	    11) echo "rsync error : Error in file I/O "
-		return;;
-	    12) echo "rsync error : Error in rsync protocol data stream "
-		return;;
-	    13) echo "rsync error : Errors with program diagnostics "
-		return;;
-	    14) echo "rsync error : Error in IPC code "
-		return;;
-	    20) echo "rsync error : Received SIGUSR1 or SIGINT "
-		return;;
-	    21) echo "rsync error : Some error returned by waitpid() "
-		return;;
-	    22) echo "rsync error : Error allocating core memory buffers "
-		return;;
-	    23) echo "rsync error : Partial transfer due to error"
-		return;;
-	    24) echo "rsync error : Partial transfer due to vanished source files"
-		return;;
-	    30) echo "rsync error : Timeout in data send/receive "
-		return;;
-	    *)  echo "rsync error : return code of rsync unknown :" $RET
-		return;;
-	esac
-    else
-	echo "unknown language $MYLANG."
-	return
-    fi
-}
-    
-
-#D-#==================================================
-#D-function IGCM_sys_Miror_libIGCM
-#D-* Purpose: Mirror libIGCM PATH and lib to ulam
-#D-* Examples:
-#D-
-function IGCM_sys_Mirror_libIGCM {
-    IGCM_debug_PushStack "IGCM_sys_Mirror_libIGCM"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Mirror_libIGCM"
-    fi
-
-    typeset RET DEST
-
-    IGCM_sys_RshPost <<-EOF
-    mkdir -p ${HOME}/MIRROR/${PATHlibIGCM}
-EOF
-    rsh ulam -n hostname > /dev/null 2>&1
-    RET=$?
-    if [ $RET -eq 0 ] ; then
-	echo ${RSYNC} ${RSYNC_opt} -e "rsh " ${libIGCM} ulam:${HOME}/MIRROR/${PATHlibIGCM} > out_rsync 2>&1
-	${RSYNC} ${RSYNC_opt} -e "rsh " ${libIGCM} ulam:${HOME}/MIRROR/${PATHlibIGCM} >> out_rsync 2>&1
-	RET=$?
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Mirror_libIGCM Warning : no libIGCM on ulam."
-	    cat out_rsync
-	fi
-    else
-	echo "No POST-TREATMENT avaible because ulam is down."
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Mirror_libIGCM"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Cp
-#D-* Purpose: generic cp
-#D-* Examples:
-#D-
-function IGCM_sys_Cp {
-    IGCM_debug_PushStack "IGCM_sys_Cp" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Cp :" $@
-    fi
-
-    typeset RET
-
-    echo cp $@ > out_rsync 2>&1
-    \cp $@ >> out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-	echo "IGCM_sys_Cp : error."
-	cat out_rsync
-	IGCM_debug_Exit "IGCM_sys_Cp"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Cp"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Rm
-#D-* Purpose: generic rm
-#D-* Examples:
-#D-
-function IGCM_sys_Rm {
-    IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
-    if ( $DEBUG_sys ) ; then
-        echo "IGCM_sys_Rm :" $@
-    fi
-
-    typeset RET
-
-    echo rm $@ > out_rsync 2>&1
-    \rm $@ >> out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-        echo "IGCM_sys_Rm : error."
-        cat out_rsync
-        IGCM_debug_Exit "IGCM_sys_Rm"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Rm"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Mv
-#D-* Purpose: generic move
-#D-* Examples:
-#D-
-function IGCM_sys_Mv {
-    IGCM_debug_PushStack "IGCM_sys_Mv" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Mv :" $@
-    fi
-
-    if [ $DRYRUN = 0 ]; then
-
-        typeset RET
-            
-        echo mv $@ > out_rsync 2>&1
-        \mv $@ >> out_rsync 2>&1
-        RET=$?
-    
-        if [ ${RET} -gt 0 ] ; then
-            echo "IGCM_sys_Mv : error in mv."
-            cat out_rsync
-            IGCM_debug_Exit "IGCM_sys_Mv"
-        fi
-    else
-        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_Mv"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Dir
-#D-* Purpose: Copy a complete directory on $(ARCHIVE)
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Dir {
-    IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Dir :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -d ${1} ] ; then
-	    echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
-	    return
-	fi
-
-	typeset RET
-
-	# Only if we use rsync
-	#IGCM_sys_TestDirArchive $( dirname $2 )
-	#
-	#USUAL WAY
-	rcp -r $1 gaya:$2 > out_rsync 2>&1
-  	RET=$?
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Dir : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Put_Dir"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get_Dir
-#D-* Purpose: Copy a complete directory from $(ARCHIVE)
-#D-* Examples:
-#D-
-function IGCM_sys_Get_Dir {
-    IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Get_Dir :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -d ${1} ] ; then
-	    echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
-	    return
-	fi
-
-	typeset RET
-
-	#USUAL WAY
-	rcp -rp gaya:$1 $2 > out_rsync 2>&1
-  	RET=$?
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get_Dir : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Get_Dir"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
-}
-
-#====================================================
-#- Call IGCM_sys_Mirror_libIGCM now !
-if ( $MirrorlibIGCM ) ; then
-    IGCM_sys_Mirror_libIGCM
-fi
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Rest
-#D-* Purpose: Put computied restarts on $(ARCHIVE).
-#D-           File and target directory must exist.
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Rest {
-    IGCM_debug_PushStack "IGCM_sys_Put_Rest" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Rest :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -f ${1} ] ; then
-	    echo "ERROR : IGCM_sys_Put_Rest ${1} DOES NOT EXIST ."
-	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
-	fi
-
-	typeset RET
-	#
-	if [ X${JobType} = XRUN ] ; then
-	    IGCM_sys_Chmod 444 ${1}
-	fi
-	#
-	#USUAL WAY
-	mfput $1 $2 > out_rsync 2>&1
-  	RET=$?
-
-# 	#RSYNC WITH NETWORK RSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
-
-#  	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Rest : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Rest"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Out
-#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Out {
-    IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Out :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -f ${1} ] ; then
-	    echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Put_Out"
-	    return 1
-	fi
-
-	typeset RET
-	#
-	if [ X${JobType} = XRUN ] ; then
-	    if [ X${3} = X ] ; then
-		IGCM_sys_Chmod 444 ${1}
-	    fi
-	fi
-	#
-	#USUAL WAY
-	mfput $1 $2 > out_rsync 2>&1
-	RET=$?
-
-# 	#RSYNC WITH NETWORK RSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
-
-#  	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Out : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Put_Out"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Out"
-    return 0
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get
-#D-* Purpose: Get a file from ${ARCHIVE}
-#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
-#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
-function IGCM_sys_Get {
-    IGCM_debug_PushStack "IGCM_sys_Get" $@
-
-    typeset DEST RET dm_liste ifile target
-
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Get :" $@
-    fi
-    if [ $DRYRUN -le 2 ]; then
-	if [ X${1} = X'/l' ] ; then
-            # test if the first file is present in the old computation :
-	    eval set +A dm_liste \${${2}}
-	else
-	    dm_liste=${1}
-	fi
-	eval DEST=\${${#}}
-
-        # test if the (first) file is present in the old computation :
-	IGCM_sys_TestFileArchive ${dm_liste[0]}
-	RET=$?
-        if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
-	    IGCM_debug_Exit "IGCM_sys_Get"
-	    IGCM_debug_PopStack "IGCM_sys_Get"
-	    return
-        fi
-
-	# SD : dm_liste is not suited for computing job
-	#      because we change filename during transfert
-	#      dm_liste is better suited for post-treatment
-	#dm_liste=" "
-  	#(( ifile=1 ))
-	#while [ $ifile -lt $# ] ; do
-	#    dm_liste=$( eval echo ${dm_liste} " "\${${ifile}} )
-	#    (( ifile = ifile + 1 ))
-	#done
-	#DEST=$( eval echo \${${#}} )
-
-	#USUAL WAY
-	mfget ${dm_liste[*]} ${DEST} > out_rsync 2>&1
-  	RET=$?
-
-# 	#RSYNC WITH NETWORK RSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} >> out_rsync 2>&1
-
-# 	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get : copy error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Get"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Get"
-}
-
-############################################################## A FINIR !!
-
-#D-#==================================================
-#D-function IGCM_sys_GetDate_FichWork
-#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
-#D-* Examples:
-#D-
-function IGCM_sys_GetDate_FichWork {
-    IGCM_debug_PushStack "IGCM_sys_FichWork" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_GetDate_FichWork :" $@
-    fi
-    # donne la date filesys d'un fichier sur la machine work
-    IGCM_debug_PopStack "IGCM_sys_FichWork"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_GetDate_FichArchive
-#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE 
-#D-* Examples:
-#D-
-function IGCM_sys_GetDate_FichArchive {
-    IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_GetDate_FichArchive :" $@
-    fi
-    IGCM_debug_PopStack "IGCM_sys_FichArchive"
-}
-
-##############################################################
-# REBUILD OPERATOR
-
-function IGCM_sys_rebuild {
-    IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_rebuild :" $@
-    fi
-    /home/rech/psl/rpsl035/SX/bin/rebuild -f -o $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_rebuild : erreur ${@}."
-       IGCM_debug_Exit "rebuild"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_rebuild"
-}
-
-############################################################
-# Activate Running Environnment Variables
-
-function IGCM_sys_activ_variables {
-    IGCM_debug_PushStack "IGCM_sys_activ_variables"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_activ_variables"
-    fi
-
-# --------------------------------------------------------------------
-#D- MPI specifications
-# --------------------------------------------------------------------
-
-#D-- MPISUSPEND
-    export MPISUSPEND=${MPISUSPEND:=OFF}
-
-#D-- MPIPROGINF #other choices : ALL_DETAIL2
-    export MPIPROGINF=ALL
-#D- activate ftrace (with -ftrace)
-    export F_FTRACE=YES
-#D- communication information (with -ftrace)
-    export MPICOMMINF=DETAIL
-
-# --------------------------------------------------------------------
-#D- Other specifications
-# --------------------------------------------------------------------
-
-#D- max number of character/line in output job
-    export F_SYSLEN=5000
-#D- number of error that can be admitted on the NEC
-    export F_ERRCNT=0
-#D- global performance
-    export F_PROGINF=DETAIL
-
-#D- I/O performance (FORTRAN I/O only not netCDF)
-    export F_FILEINF=${F_FILEINF:=NO}
-#D- netCDF I/O performance
-    export NC_FILEINF=${NC_FILEINF:=NO}
-
-    IGCM_debug_PopStack "IGCM_sys_activ_variables"
-}
-
-############################################################
-# Desactivate Running Environnment Variables
-
-function IGCM_sys_desactiv_variables {
-    IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_desactiv_variables"
-    fi
-# --------------------------------------------------------------------
-#D- MPI specifications
-# --------------------------------------------------------------------
-
-#D-- MPIPROGINF
-    export MPIPROGINF=NO
-
-# --------------------------------------------------------------------
-#D- Other specifications
-# --------------------------------------------------------------------
-
-#D- global performance
-    export F_PROGINF=NO  
-
-    IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
-  
-}
-
-############################################################
-# Build run file
-
-function IGCM_sys_build_run_file {
-    IGCM_debug_PushStack "IGCM_sys_build_run_file" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_build_run_file " $@
-    fi
-    (( NUM_PROC_ATM = BATCH_NUM_PROC_TOT - 1 ))
-    (( NUM_PROC_OASIS = BATCH_NUM_PROC_TOT - NUM_PROC_ATM ))
-    (( NUM_PROC_OCE = BATCH_NUM_PROC_TOT - NUM_PROC_ATM ))
-    
-    if [ $1 = MPI2 ]; then
-	cat <<EOF > run_file
--p 1 -np 1 -e ./oasis
-EOF
-	(( NUM_PROCESS = BATCH_NUM_PROC_TOT + 1 ))
-	config_UserChoices_JobRunOptions='"-max_np ${NUM_PROCESS} -f"'
-
-    elif [ $1 = MPI1 ]; then
-	cat <<EOF > run_file
--p $NUM_PROC_OASIS -e ./oasis
--p $NUM_PROC_ATM -e ./lmdz.x
--p $NUM_PROC_OCE -e ./opa.xx
-EOF
- 
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_build_run_file"
-  
-}
-
-############################################################
-# Check of space available on temporary filesytems
-function IGCM_sys_check_quota {
-    IGCM_debug_PushStack "IGCM_sys_check_quota"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_check_quota"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_check_quota"
-}
-
Index: unk/libIGCM/libIGCM_sys/libIGCM_sys_mercurex8.ksh
===================================================================
--- /trunk/libIGCM/libIGCM_sys/libIGCM_sys_mercurex8.ksh	(revision 723)
+++ 	(revision )
@@ -1,1498 +1,0 @@
-#!/bin/ksh
-
-#**************************************************************
-# Author: Sebastien Denvil, Martial Mancip
-# Contact: Martial.Mancip__at__ipsl.jussieu.fr
-# $Revision::                                          $ Revision of last commit
-# $Author::                                            $ Author of last commit
-# $Date::                                              $ Date of last commit
-# IPSL (2006)
-#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
-#
-#**************************************************************
-
-#=========================================================
-# The documentation of this file can be automatically generated
-# if you use the prefix #D- for comments to be extracted. 
-# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
-#=========================================================
-
-#D-#==================================================
-#D-LibIGCM_sys for Mercure SX8-R
-#D-#==================================================
-#D-
-#D- This ksh library if a layer under some usefull 
-#D-environment variables and shell commands.
-#D-All those definitions depend on host particularities.
-#D-It manages a stack mechanism and test validity of operations.
-#D-All function described bellow must be prefixed by IGCM_sys.
-
-#====================================================
-# libIGCM_sys PARAMETERS
-#====================================================
-
-# gawk specific location on SX9
-export PATH=/applications/gawk-3.0.4/bin:${PATH}
-
-#====================================================
-# set DEBUG_sys to true to output calls of function
-typeset -r DEBUG_sys=${DEBUG_sys:=true}
-
-#====================================================
-# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
-typeset -r DRYRUN=${DRYRUN:=0}
-
-# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
-# -------------------------------------------------------------------------------------
-# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
-# |          |  Cp/Exe param files |            |  Chmod  |                           |
-# |          |      Qsub           |            |         |                           |
-# -------------------------------------------------------------------------------------
-# |    0     |       yes           |    yes     |  yes    |      yes                  |
-# -------------------------------------------------------------------------------------
-# |    1     |       yes           |    yes     |  yes    |      no                   |
-# -------------------------------------------------------------------------------------
-# |    2     |       yes           |    yes     |  no     |      no                   |
-# -------------------------------------------------------------------------------------
-# |    3     |       yes           |    no      |  no     |      no                   |
-# -------------------------------------------------------------------------------------
-
-#=====================================================
-# Global Variables :
-#=====================================================
-# Language : "fr" or "en"
-typeset -r MYLANG="fr"
-
-#=====================================================
-# Host and user names
-# $hostname ou hostname
-typeset  HOST=${HOST:=$( hostname )}
-# $username ou whoami
-typeset  LOGIN=${LOGIN:=$( whoami )}
-# $hostname of the MASTER job
-typeset -r MASTER=mercure
-
-#D-
-#D-#==================================================
-#D-Program used in libIGCM
-#D-#==================================================
-
-# rsync with path
-typeset -r RSYNC=/home/cont003/p86denv/SX_RSYNC/bin/rsync
-# RSYNC_opt args to rsync
-typeset -r RSYNC_opt="-va"
-# ie storage filesystem
-typeset -r STOREHOST=${MASTER}
-
-#====================================================
-# Host specific DIRECTORIES
-#====================================================
-
-# ============ CESIUM START ============ #
-
-#====================================================
-#- Mirror libIGCM from mercure to cesium if needed
-#ROOTSYS=$( echo ${libIGCM} | gawk -F"/" '{print $3}' )
-#if [ ! ${ROOTSYS} = "home" ] ; then
-#  typeset -r MirrorlibIGCM=${MirrorlibIGCM:=true}
-#else
-#  typeset -r MirrorlibIGCM=${MirrorlibIGCM:=false}
-#fi
-
-#====================================================
-#- libIGCM_POST
-#if ( ${MirrorlibIGCM} ) ; then
-#  PATHlibIGCM=$( echo ${libIGCM} | gawk -F"${LOGIN}/" '{print $2}' | sed -e "s&/libIGCM&&" )
-#  typeset -r libIGCM_POST=${HOME}/MIRROR/${PATHlibIGCM}/libIGCM
-#else
-#  typeset -r libIGCM_POST=${libIGCM}
-#fi
-
-# ============ CESIUM  END  ============ #
-
-#====================================================
-#- MirrorlibIGCM uncomment for frontend
-typeset -r MirrorlibIGCM=${MirrorlibIGCM:=false}
-
-#====================================================
-#- libIGCM_POST uncomment for frontend
-typeset -r libIGCM_POST=${libIGCM}
-
-#====================================================
-#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
-typeset -r R_EXE="${MODIPSL}/bin"
-
-#====================================================
-#- SUBMIT_DIR : submission dir
-typeset SUBMIT_DIR=${SUBMIT_DIR:=${PBS_O_WORKDIR}}
-
-#====================================================
-#- ARCHIVE (dedicated to large files)
-typeset -r ARCHIVE=${CCCSTOREDIR}
-
-#- ARCHIVE (dedicated to small/medium files)
-typeset -r STORAGE=${CCCWORKDIR}
-
-#====================================================
-#- IN
-typeset -r R_IN=${R_IN:=/ccc/work/cont003/dsm/p86ipsl/IGCM}
-typeset -r R_IN_ECMWF=${R_IN_ECMWF:=/dmnfs/cont003/p24data}
-
-#====================================================
-#- R_OUT
-typeset -r R_OUT=${ARCHIVE}/IGCM_OUT
-
-#====================================================
-#- R_FIG (hosting figures : monitoring and atlas, and/or small files)
-typeset -r R_FIG=${STORAGE}/IGCM_OUT
-
-#====================================================
-#- R_BUF (ONLY FOR double copy an scratch)
-typeset -r R_BUF=${SCRATCHDIR}/IGCM_OUT
-
-#====================================================
-#- BIG_DIR : BIG_DIR to store files waiting for rebuild
-typeset -r BIG_DIR=${BIG_DIR:=${SCRATCHDIR}/REBUILD}
-
-#====================================================
-#- OUT_POST
-typeset -r R_OUT_POST=${SCRATCHDIR}/IGCM_OUT
-
-#====================================================
-#- RUN_DIR_PATH : Temporary working directory (=> TMP)
-typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${LOCALTMPDIR}}
-
-#====================================================
-#- HOST_MPIRUN_COMMAND
-typeset -r HOST_MPIRUN_COMMAND=${HOST_MPIRUN_COMMAND:="mpirun"}
-
-#====================================================
-#- Max number of arguments passed to nco operator or demigration command
-UNIX_MAX_LIMIT=360
-
-#D-#==================================================
-#D-function IGCM_sys_RshMaster
-#D-* Purpose: Connection to frontend machine.
-#D-* Examples:
-#D-
-function IGCM_sys_RshMaster {
-  IGCM_debug_PushStack "IGCM_sys_RshMaster" $@
-  ssh -t ${MASTER} /bin/ksh <<-EOF
-  export libIGCM=${libIGCM}
-  export DEBUG_debug=${DEBUG_debug}
-  . ${libIGCM}/libIGCM_debug/libIGCM_debug.ksh
-  . ${libIGCM}/libIGCM_card/libIGCM_card.ksh
-  ${@}
-EOF
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_RshMaster : erreur."
-    IGCM_debug_Exit "IGCM_sys_RshMaster"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_RshMaster"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_RshArchive
-#D-* Purpose: Archive rsh command
-#D-* Examples:
-#D-
-function IGCM_sys_RshArchive {
-  IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
-  /bin/ksh <<-EOF
-    ${@}
-EOF
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_RshArchive : erreur."
-    IGCM_debug_Exit "IGCM_sys_RshArchive"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_RshArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_RshPost
-#D-* Purpose: Post-process rsh command
-#D-* Examples:
-#D-
-function IGCM_sys_RshPost {
-  IGCM_debug_PushStack "IGCM_sys_RshPost" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_RshPost :" $@
-  fi
-
-  #echo cat tmp_IGCM_sys_RshPost_$$ INITIAL
-  #cat tmp_IGCM_sys_RshPost_$$
-  # keep standard input (stdin) for the loop onto temporary file
-  cat >tmp_IGCM_sys_RshPost_$$
-
-# ============ FRONTEND START ============ #
-
-  /bin/ksh <tmp_IGCM_sys_RshPost_$$
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_RshPost : erreur."
-    IGCM_debug_Exit "IGCM_sys_RshPost"
-  fi
-  \rm tmp_IGCM_sys_RshPost_$$
-
-# ============ FRONTEND  END  ============ #
-
-# ============ CESIUM START ============ #
-#  typeset NB_ESSAI DELAI status i
-#  # number of tentative
-#  NB_ESSAI=10
-#  # time delay between tentative
-#  DELAI=10
-#  (( i = 0 ))
-#  while [ $i -lt $NB_ESSAI ] ; do
-#    ssh -t mercure01 ssh cesium /bin/ksh <tmp_IGCM_sys_RshPost_$$
-#    status=$?
-#    if [ ${status} -gt 0 ]; then
-#      IGCM_debug_Print 2 "IGCM_sys_RshPost : ssh failed ${i}/${NB_ESSAI}"
-#      IGCM_debug_Print 2 "IGCM_sys_RshPost : sleep ${DELAI} seconds and try again."
-#      sleep $DELAI
-#    else
-#      break
-#    fi
-#    (( i = i + 1 ))
-#  done 
-#  # delete temporary file
-#  /bin/rm tmp_IGCM_sys_RshPost_$$
-# ============ CESIUM  END  ============ #
-
-  IGCM_debug_PopStack "IGCM_sys_RshPost"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_SendMail
-#D-* Purpose: Send mail when simulation is over
-#D-* Examples:
-#D-
-function IGCM_sys_SendMail {
-  IGCM_debug_PushStack "IGCM_sys_SendMail" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_SendMail :" $@
-  fi
-
-  if ( ${ExitFlag} ) ; then
-    status=failed
-  else
-    status=completed
-  fi
-  cat  << END_MAIL > job_end.mail
-  Dear ${LOGIN},
-
-  Simulation ${config_UserChoices_JobName} is ${status} on supercomputer `hostname`.
-  Job started : ${DateBegin}
-  Job ended   : ${DateEnd}
-  Output files are available in ${R_SAVE}
-  Script files, Script Outputs and Debug files (if necessary) are available in ${SUBMIT_DIR}
-END_MAIL
-
-  if  [ X"${config_UserChoices_MailName}" != X ] ; then
-    mailx -s "${config_UserChoices_JobName} ${status}" ${config_UserChoices_MailName} <  job_end.mail
-  elif [ -f ~/.forward ] ; then
-    mailx -s "${config_UserChoices_JobName} ${status}" $( cat ~/.forward ) < job_end.mail
-  else
-    mailx -s "${config_UserChoices_JobName} ${status}" ${LOGIN} < job_end.mail
-  fi
-
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_SendMail : erreur."
-    IGCM_debug_Exit "IGCM_sys_SendMail"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_SendMail"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Mkdir
-#D-* Purpose: Master locale mkdir command
-#D-* Examples:
-#D-
-function IGCM_sys_Mkdir {
-  IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Mkdir :" $@
-  fi
-  if [ ! -d ${1} ]; then
-    \mkdir -p $1
-    if [ $? -gt 0 ] ; then
-      echo "IGCM_sys_Mkdir : erreur."
-      IGCM_debug_Exit "IGCM_sys_Mkdir"
-    fi
-  fi
-  # vérification :
-  if [ ! -d ${1} ] ; then
-    echo "IGCM_sys_Mkdir : erreur."
-    IGCM_debug_Exit "IGCM_sys_Mkdir"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Mkdir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_MkdirArchive
-#D-* Purpose: Mkdir on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_MkdirArchive {
-  IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_MkdirArchive :" $@
-  fi
-  #- creation de repertoire sur le serveur fichier
-  if [ ! -d ${1} ]; then 
-    \mkdir -p $1
-    if [ $? -gt 0 ] ; then
-      echo "IGCM_sys_MkdirArchive : erreur."
-      IGCM_debug_Exit "IGCM_sys_MkdirArchive"
-    fi
-  fi
-  IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_MkdirWork
-#D-* Purpose: Mkdir on Work
-#D-* Examples:
-#D-
-function IGCM_sys_MkdirWork {
-  IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_MkdirWork :" $@
-  fi
-  #- creation de repertoire sur le serveur fichier
-  if [ ! -d ${1} ]; then 
-    \mkdir -p $1
-    if [ $? -gt 0 ] ; then
-      echo "IGCM_sys_MkdirWork : erreur."
-      IGCM_debug_Exit "IGCM_sys_MkdirWork"
-    fi
-  fi
-  IGCM_debug_PopStack "IGCM_sys_MkdirWork"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Cd
-#D-* Purpose: master cd command
-#D-* Examples:
-#D-
-function IGCM_sys_Cd {
-  IGCM_debug_PushStack "IGCM_sys_Cd" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Cd :" $@
-  fi
-  \cd $1
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_Cd : erreur."
-    IGCM_debug_Exit "IGCM_sys_Cd"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Cd"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Chmod
-#D-* Purpose: Chmod
-#D-* Examples:
-#D-
-function IGCM_sys_Chmod {
-  IGCM_debug_PushStack "IGCM_sys_Chmod" -- $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Chmod :" $@
-  fi
-  if [ $DRYRUN -le 1 ]; then
-    \chmod $@
-    if [ $? -gt 0 ] ; then
-      echo "IGCM_sys_Chmod : erreur."
-      IGCM_debug_Exit "IGCM_sys_Chmod"
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Chmod"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_FileSize
-#D-* Purpose: Filesize
-#D-* Examples:
-#D-
-function IGCM_sys_FileSize {
-  IGCM_debug_PushStack "IGCM_sys_FileSize" $@
-
-  typeset sizeF
-  set +A sizeF -- $( ls -la ${1} )
-  if [ $? -gt 0 ] ; then
-    IGCM_debug_Exit "IGCM_sys_FileSize"
-  fi
-  eval ${2}=${sizeF[4]}
-
-  IGCM_debug_PopStack "IGCM_sys_FileSize"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestDir
-#D-* Purpose: Test Directory that must exists
-#D-* Examples:
-#D-
-function IGCM_sys_TestDir {
-  IGCM_debug_PushStack "IGCM_sys_TestDir" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_TestDir :" $@
-  fi
-  typeset ExistFlag
-  ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
-  IGCM_debug_PopStack "IGCM_sys_TestDir"
-
-  return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestDirArchive
-#D-* Purpose: Test Directory that must exists on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_TestDirArchive {
-  IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_TestDirArchive :" $@
-  fi
-  typeset ExistFlag
-  ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
-  IGCM_debug_PopStack "IGCM_sys_TestDirArchive"
-
-  return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_IsFileArchived
-#D-* Purpose: Test file that must NOT EXISTS on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_IsFileArchived {
-  IGCM_debug_PushStack "IGCM_sys_IsFileArchived" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_IsFileArchived :" $@
-  fi
-  typeset IsArchivedFlag
-  IsArchivedFlag=$( [ X$( echo $1 | grep ^\/ccc\/store ) != X ] && echo 0 || echo 1 )
-  IGCM_debug_PopStack "IGCM_sys_IsFileArchived"
-
-  return ${IsArchivedFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestFileArchive
-#D-* Purpose: Test file that must NOT EXISTS on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_TestFileArchive {
-  IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
-  typeset ExistFlag
-  ExistFlag=$( [ -f $1 ] && echo 0 || echo 1 )
-  IGCM_debug_PopStack "IGCM_sys_TestFileArchive"
-
-  return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestFileBuffer
-#D-* Purpose: Test file that must NOT EXISTS on Buffer
-#D-* Examples:
-#D-
-function IGCM_sys_TestFileBuffer {
-  IGCM_debug_PushStack "IGCM_sys_TestFileBuffer" $@
-  typeset ExistFlag
-  ExistFlag=$( [ -f $1 ] && echo 0 || echo 1 )
-  IGCM_debug_PopStack "IGCM_sys_TestFileBuffer"
-
-  return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_CountFileArchive
-#D-* Purpose: Count files on Archive filesystem
-#D-* Examples:
-#D-
-function IGCM_sys_CountFileArchive {
-  IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
-  ls ${@} 2>/dev/null | wc -l
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_CountFileArchive : erreur."
-  fi
-  IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_CountFileBuffer
-#D-* Purpose: Count files on Scratch filesystem
-#D-* Examples:
-#D-
-function IGCM_sys_CountFileBuffer {
-  IGCM_debug_PushStack "IGCM_sys_CountFileBuffer" $@
-  ls ${@} 2>/dev/null | wc -l
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_CountFileBuffer : erreur."
-  fi
-  IGCM_debug_PopStack "IGCM_sys_CountFileBuffer"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Tree
-#D-* Purpose: Tree directories with files on ${ARCHIVE}
-#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
-#D-
-function IGCM_sys_Tree {
-  IGCM_debug_PushStack "IGCM_sys_Tree" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Tree :" $@
-  fi
-
-  \ls -lR ${@}
-
-  IGCM_debug_PopStack "IGCM_sys_Tree"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Tar
-#D-* Purpose: master tar command
-#D-* Examples:
-#D-
-function IGCM_sys_Tar {
-  IGCM_debug_PushStack "IGCM_sys_Tar" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Tar :" $@
-  fi
-  \tar cf $@
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_Tar : erreur."
-    IGCM_debug_Exit "IGCM_sys_Tar"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Tar"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_UnTar
-#D-* Purpose: master un-tar command
-#D-* Examples:
-#D-
-function IGCM_sys_UnTar {
-  IGCM_debug_PushStack "IGCM_sys_UnTar" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_UnTar :" $@
-  fi
-  \tar xvf $1
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_UnTar : erreur."
-    IGCM_debug_Exit "IGCM_sys_UnTar"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_UnTar"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Qsub
-#D-* Purpose: Qsub new job
-#D-* Examples:
-#D-
-function IGCM_sys_Qsub {
-  IGCM_debug_PushStack "IGCM_sys_Qsub" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Qsub :" $@
-  fi
-  /usr/bin/nqsII/qsub -o ${Script_Output} -N ${config_UserChoices_JobName}.${CumulPeriod} < $1
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_Qsub : erreur -o ${Script_Output} -N ${config_UserChoices_JobName}.${CumulPeriod} $@."
-    IGCM_debug_Exit "IGCM_sys_Qsub"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Qsub"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_QsubPost
-#D-* Purpose: Qsub new job on scalaire
-#D-* Examples:
-#D-
-function IGCM_sys_QsubPost {
-  IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_QsubPost :" $@
-  fi
-
-# ============ FRONTEND START ============ #
-
-  /usr/bin/nqsII/qsub -q scalaire -o ${POST_DIR}/${Script_Post_Output}.out ${libIGCM}/$1.job -v ${listVarEnv}
-
-# ============ FRONTEND  END  ============ #
-
-# ============ CESIUM START ============ #
-#  typeset NB_ESSAI DELAI status i
-#  # number of tentative
-#  NB_ESSAI=10
-#  # time delay between tentative
-#  DELAI=10
-#  (( i = 0 ))
-#  while [ $i -lt $NB_ESSAI ] ; do
-#    /usr/local/bin/ccc_msub -o ${POST_DIR}/${Script_Post_Output}.out -e ${POST_DIR}/${Script_Post_Output}.e.out -E "-v ${listVarEnv}" ${libIGCM_POST}/$1.job
-#    status=$?
-#    if [ ${status} -gt 0 ]; then
-#      sleep $DELAI
-#    else
-#      break
-#    fi
-#    (( i = i + 1 ))
-#  done 
-# ============ CESIUM  END  ============ #
-
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_QsubPost : erreur " $@
-    IGCM_debug_Exit "IGCM_sys_QsubPost"
-  fi
-  IGCM_debug_PopStack "IGCM_sys_QsubPost"
-}
-
-#D-*************************
-#D- File transfer functions 
-#D-*************************
-#D-
-
-#D-#==================================================
-#D-function IGCM_sys_Rsync_out
-#D-* Purpose: treat return val of rsync
-#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
-#D-  Error values and explanations can depend on your system version.
-function IGCM_sys_Rsync_out {
-  RET=$1
-  if [ ! $RET ] ; then
-    echo "rsync error !"
-  fi
-
-  if [ $MYLANG = "fr" ]; then
-    case $RET in
-    0)  return ;;
-    1)  echo "Erreur de rsync ; RERR_SYNTAX : "
-      echo "Erreur de syntaxe ou d'utilisation."
-      return;;
-    2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
-      echo "Incompatibilité de protocole."
-      return;;
-    3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
-      echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
-      echo "répertoires"
-      return;;
-    4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
-      echo "Action demandée non supportée : une tentative de manipulation de"
-      echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
-      echo "été faite ; ou une option qui est supportée par le  client  mais"
-      echo "pas par le serveur a été spécifiée."
-      return;;
-    10) echo "Erreur de rsync ; RERR_SOCKETIO"
-      echo "Erreur dans le socket d'entrée sortie"
-      return;;
-    11) echo "Erreur de rsync ; RERR_FILEIO"
-      echo "Erreur d'entrée sortie fichier"
-      return;;
-    12) echo "Erreur de rsync ; RERR_STREAMIO"
-      echo "Erreur dans flux de donnée du protocole rsync"
-      return;;
-    13) echo "Erreur de rsync ; RERR_MESSAGEIO"
-      echo "Erreur avec les diagnostics du programme"
-      return;;
-    14) echo "Erreur de rsync ; RERR_IPC"
-      echo "Erreur dans le code IPC"
-      return;;
-    20) echo "Erreur de rsync ; RERR_SIGNAL"
-      echo "SIGUSR1 ou SIGINT reçu"
-      return;;
-    21) echo "Erreur de rsync ; RERR_WAITCHILD"
-      echo "Une erreur retournée par waitpid()"
-      return;;
-    22) echo "Erreur de rsync ; RERR_MALLOC"
-      echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
-      return;;
-    23) echo ""
-      echo "Erreur fichier inexistant"
-      return;;
-    30) echo "Erreur de rsync ; RERR_TIMEOUT"
-      echo "Temps d'attente écoulé dans l'envoi/réception de données"
-      return;;
-    *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
-      return;;
-    esac
-  elif [ $MYLANG = "en" ] ; then
-    case $RET in
-    0)  return;;		
-    1)  echo "rsync error : Syntax or usage error "
-      return;;
-    2)  echo "rsync error : Protocol incompatibility "
-      return;;
-    3)  echo "rsync error : Errors selecting input/output files, dirs"
-      return;;
-    4)  echo "rsync error : Requested action not supported: an attempt"
-      echo "was made to manipulate 64-bit files on a platform that cannot support"
-      echo "them; or an option was specified that is supported by the client and"
-      echo "not by the server."
-      return;;
-    5)  echo "rsync error : Error starting client-server protocol"
-      return;;
-    10) echo "rsync error : Error in socket I/O "
-      return;;
-    11) echo "rsync error : Error in file I/O "
-      return;;
-    12) echo "rsync error : Error in rsync protocol data stream "
-      return;;
-    13) echo "rsync error : Errors with program diagnostics "
-      return;;
-    14) echo "rsync error : Error in IPC code "
-      return;;
-    20) echo "rsync error : Received SIGUSR1 or SIGINT "
-      return;;
-    21) echo "rsync error : Some error returned by waitpid() "
-      return;;
-    22) echo "rsync error : Error allocating core memory buffers "
-      return;;
-    23) echo "rsync error : Partial transfer due to error"
-      return;;
-    24) echo "rsync error : Partial transfer due to vanished source files"
-      return;;
-    30) echo "rsync error : Timeout in data send/receive "
-      return;;
-    *)  echo "rsync error : return code of rsync unknown :" $RET
-      return;;
-    esac
-  else
-    echo "unknown language $MYLANG."
-    return
-  fi
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Miror_libIGCM
-#D-* Purpose: Mirror libIGCM PATH and lib to cesium
-#D-* Examples:
-#D-
-function IGCM_sys_Mirror_libIGCM {
-  IGCM_debug_PushStack "IGCM_sys_Mirror_libIGCM"
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Mirror_libIGCM"
-  fi
-
-  typeset RET DEST
-
-  mkdir -p ${HOME}/MIRROR/${PATHlibIGCM}
-
-  echo ${RSYNC} ${RSYNC_opt} ${libIGCM} ${HOME}/MIRROR/${PATHlibIGCM} > out_rsync 2>&1
-  ${RSYNC} ${RSYNC_opt} ${libIGCM} ${HOME}/MIRROR/${PATHlibIGCM} >> out_rsync 2>&1
-  RET=$?
-
-  if [ ${RET} -gt 0 ] ; then
-    echo "IGCM_sys_Mirror_libIGCM Warning : no libIGCM on cesium."
-    cat out_rsync
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Mirror_libIGCM"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Cp
-#D-* Purpose: generic cp
-#D-* Examples:
-#D-
-function IGCM_sys_Cp {
-  IGCM_debug_PushStack "IGCM_sys_Cp" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Cp :" $@
-  fi
-
-  typeset RET
-
-  echo cp $@ > out_rsync 2>&1
-  \cp $@ >> out_rsync 2>&1
-  RET=$?
-
-  if [ ${RET} -gt 0 ] ; then
-    echo "IGCM_sys_Cp : error."
-    cat out_rsync
-    IGCM_debug_Exit "IGCM_sys_Cp"
-  else
-    \rm out_rsync
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Cp"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Rm
-#D-* Purpose: generic rm
-#D-* Examples:
-#D-
-function IGCM_sys_Rm {
-  IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Rm :" $@
-  fi
-
-  typeset RET
-
-  echo rm $@ > out_rsync 2>&1
-  \rm $@ >> out_rsync 2>&1
-  RET=$?
-
-  if [ ${RET} -gt 0 ] ; then
-    echo "IGCM_sys_Rm : error."
-    cat out_rsync
-    IGCM_debug_Exit "IGCM_sys_Rm"
-  else
-    \rm out_rsync
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Rm"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Mv
-#D-* Purpose: generic move
-#D-* Examples:
-#D-
-function IGCM_sys_Mv {
-  IGCM_debug_PushStack "IGCM_sys_Mv" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Mv :" $@
-  fi
-
-  if [ $DRYRUN = 0 ]; then
-
-    typeset RET
-    
-    echo mv $@ > out_rsync 2>&1
-    \mv $@ >> out_rsync 2>&1
-    RET=$?
-    
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Mv : error in mv."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_Mv"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-
-  IGCM_debug_PopStack "IGCM_sys_Mv"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Dir
-#D-* Purpose: Copy a complete directory on $(ARCHIVE)
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Dir {
-  IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Put_Dir :" $@
-  fi
-  if [ $DRYRUN = 0 ]; then
-    if [ ! -d ${1} ] ; then
-      echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
-      IGCM_debug_PopStack "IGCM_sys_Put_Dir"
-      return
-    fi
-
-    typeset RET
-
-    # Only if we use rsync
-    #IGCM_sys_TestDirArchive $( dirname $2 )
-    #
-    #USUAL WAY
-    \cp -r $1 $2 > out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Put_Dir : error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_Put_Dir"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Put_Dir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get_Dir
-#D-* Purpose: Copy a complete directory from ${ARCHIVE}
-#D-* Examples:
-#D-
-function IGCM_sys_Get_Dir {
-  IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Get_Dir :" $@
-  fi
-  if [ $DRYRUN = 0 ]; then
-#    if [ ! -d ${1} ] ; then
-#      echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
-#      IGCM_debug_PopStack "IGCM_sys_Get_Dir"
-#      return
-#    fi
-
-    typeset RET
-
-    # Only if we use rsync
-    #IGCM_sys_TestDirArchive $( dirname $2 )
-    #
-    # USUAL WAY
-    # add dmfind/dmget (to demigrate all offline files) :
-    #dmfind $1 -state MIG -o -state OFL -o -state PAR | dmget
-    \cp -r $1 $2 > out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Get_Dir : error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_Get_Dir"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Get_Dir"
-}
-
-#====================================================
-#- Call IGCM_sys_Mirror_libIGCM now !
-if ( $MirrorlibIGCM ) ; then
-  IGCM_sys_Mirror_libIGCM
-fi
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Rest
-#D-* Purpose: Put computied restarts on ${ARCHIVE}.
-#D-           File and target directory must exist.
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Rest {
-  IGCM_debug_PushStack "IGCM_sys_Put_Rest" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Put_Rest :" $@
-  fi
-  if [ $DRYRUN = 0 ]; then
-    if [ ! -f ${1} ] ; then
-      echo "ERROR : IGCM_sys_Put_Rest ${1} DOES NOT EXIST ."
-      IGCM_debug_Exit "IGCM_sys_Put_Rest"
-    fi
-
-    typeset RET
-    #
-    if [ X${JobType} = XRUN ] ; then
-      IGCM_sys_Chmod 444 ${1}
-    fi
-
-    #
-    # USUAL WAY
-    \cp $1 $2 > out_rsync 2>&1
-    RET=$?
-
-# 	#RSYNC WITH NETWORK SSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${STOREHOST}:${2} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${STOREHOST}:${2} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
-
-#  	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Put_Rest : error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_Put_Rest"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Put_Rest"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_PutBuffer_Rest
-#D-* Purpose: Put computied restarts on ${SCRATCHDIR}.
-#D-           File and target directory must exist.
-#D-* Examples:
-#D-
-function IGCM_sys_PutBuffer_Rest {
-  IGCM_debug_PushStack "IGCM_sys_PutBuffer_Rest" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_PutBuffer_Rest :" $@
-  fi
-  if [ $DRYRUN = 0 ]; then
-    if [ ! -f ${1} ] ; then
-      echo "ERROR : IGCM_sys_PutBuffer_Rest ${1} DOES NOT EXIST ."
-      IGCM_debug_Exit "IGCM_sys_PutBuffer_Rest"
-    fi
-
-    typeset RET
-    #
-    if [ X${JobType} = XRUN ] ; then
-      IGCM_sys_Chmod 444 ${1}
-    fi
-
-    #
-    # USUAL WAY
-    \cp $1 $2 > out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_PutBuffer_Rest : error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_PutBuffer_Rest"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_PutBuffer_Rest"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Out
-#D-* Purpose: Copy a file on ${ARCHIVE} after having chmod it in readonly
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Out {
-  IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Put_Out :" $@
-  fi
-  if [ $DRYRUN = 0 ]; then
-    if [ ! -f ${1} ] ; then
-      echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
-      IGCM_debug_PopStack "IGCM_sys_Put_Out"
-      return 1
-    fi
-    #
-    IGCM_sys_MkdirArchive $( dirname $2 )
-    #
-    typeset RET
-
-    #=====================================================
-    #         COMMENT OUT DOUBLE COPY ON SCRATCHDIR
-    #=====================================================
-
-    #echo ${2} | grep "${R_OUT}" > /dev/null 2>&1
-    #if [ $? -eq 0 ] ; then
-    #    typeset WORKPATH FILEPATH
-    #    WORKPATH=$( dirname $2 | sed -e "s|${R_OUT}|${R_BUF}|" )
-    #    IGCM_sys_MkdirWork ${WORKPATH} 
-    #    FILEPATH=${WORKPATH}/$( basename $2 )
-    #    #
-    #    IGCM_sys_Cp ${1} ${FILEPATH}
-    #fi
-
-    if [ X${JobType} = XRUN ] ; then
-      if [ X${3} = X ] ; then
-	IGCM_sys_Chmod 444 ${1}
-      fi
-    fi
-    #
-    # USUAL WAY
-    \cp $1 $2 > out_rsync 2>&1
-    RET=$?
-
-# 	#RSYNC WITH NETWORK SSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${STOREHOST}:${2} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${STOREHOST}:${2} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
-
-#  	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Put_Out : error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_Put_Out"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Put_Out"
-  return 0
-}
-
-#D-#==================================================
-#D-function IGCM_sys_PutBuffer_Out
-#D-* Purpose: Copy a file on ${SCRATCHDIR} after having chmod it in readonly
-#D-* Examples:
-#D-
-function IGCM_sys_PutBuffer_Out {
-  IGCM_debug_PushStack "IGCM_sys_PutBuffer_Out" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_PutBuffer_Out :" $@
-  fi
-  if [ $DRYRUN = 0 ]; then
-    if [ ! -f ${1} ] ; then
-      echo "WARNING : IGCM_sys_PutBuffer_Out ${1} DOES NOT EXIST ."
-      IGCM_debug_PopStack "IGCM_sys_PutBuffer_Out"
-      return 1
-    fi
-    #
-    IGCM_sys_Mkdir $( dirname $2 )
-    #
-    typeset RET
-
-    if [ X${JobType} = XRUN ] ; then
-      if [ X${3} = X ] ; then
-	IGCM_sys_Chmod 444 ${1}
-      fi
-    fi
-    #
-    # USUAL WAY
-    \cp $1 $2 > out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_PutBuffer_Out : error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_PutBuffer_Out"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_PutBuffer_Out"
-  return 0
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get
-#D-* Purpose: Get a file from ${ARCHIVE}
-#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
-#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
-function IGCM_sys_Get {
-  IGCM_debug_PushStack "IGCM_sys_Get" $@
-
-  typeset DEST RET dm_liste ifile target file_work 
-
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_Get :" $@
-  fi
-  if [ $DRYRUN -le 2 ]; then
-    if [ X${1} = X'/l' ] ; then
-      # test if the first file is present in the old computation :
-      eval set +A dm_liste \${${2}}
-    else
-      eval set +A dm_liste ${1}
-    fi
-    eval DEST=\${${#}}
-
-    #=====================================================
-    #         COMMENT OUT DOUBLE COPY ON SCRATCHDIR
-    #=====================================================
-
-    # Is it an R_OUT file (not R_IN) ?
-    #echo ${dm_liste[0]} | grep "${R_OUT}" > /dev/null 2>&1
-    #if [ $? -eq 0 ] ; then
-    #    # Yes  ? then we try to get it in SCRATCHDIR
-    #    set +A file_work $( echo ${dm_liste[*]} | sed -e "s|${R_OUT}|${R_BUF}|g" )
-    #    if [ -f ${file_work[0]} ] ; then
-    #	IGCM_sys_Cp ${file_work[*]} ${DEST}
-    #	IGCM_debug_PopStack "IGCM_sys_Get"
-    #	return
-    #    fi
-    #fi
-
-    # test if the (first) file is present in the old computation :
-    IGCM_sys_TestFileArchive ${dm_liste[0]}
-    RET=$?
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
-      IGCM_debug_Exit "IGCM_sys_Get"
-    fi
-
-    #dmget ${dm_liste[*]} > out_rsync 2>&1
-    ccc_hsm get ${dm_liste[*]} > out_rsync 2>&1
-    RET=$?
-    if [ ${RET} -gt 0 ] ; then
-      echo "WARNING IGCM_sys_Get : demigration error."
-      cat out_rsync
-      echo "WARNING IGCM_sys_Get : will stop later if the cp fails."
-    fi
-
-    #if [ ${RET} -gt 0 ] ; then
-    #    if [ ! "X$( grep "Lost dmusrcmd connection" out_rsync )" = "X" ] ; then
-    #	cat out_rsync
-    #	echo "WARNING IGCM_sys_Get : Lost dmusrcmd connection : "
-    #	sleep 30
-    #	echo "We try another time"
-    ##	dmget ${dm_liste[*]} > out_rsync 2>&1
-    #   ccc_hsm get ${dm_liste[*]} > out_rsync 2>&1
-    #	RET=$?
-    #	if [ ${RET} -gt 0 ] ; then
-    #	    echo "ERROR IGCM_sys_Get : again demigration error :"
-    #	    cat out_rsync
-    #	    IGCM_debug_Exit "IGCM_sys_Get"
-    #	fi
-    #    else
-    #	echo "ERROR IGCM_sys_Get : demigration error :"
-    #	cat out_rsync
-    #	IGCM_debug_Exit "IGCM_sys_Get"
-    #    fi
-    #fi
-
-    #USUAL WAY
-    if [ X${1} = X'/l' ] ; then
-      (( RET=0 ))
-      for target in ${dm_liste[*]} ; do
-	local_file=$( basename ${target} )
-	\cp ${target} ${DEST}/${local_file} >> out_rsync 2>&1
-	(( RET = RET + $? ))
-      done
-    else
-      \cp ${dm_liste} ${DEST} >> out_rsync 2>&1
-      RET=$?
-    fi
-
-# 	#RSYNC WITH NETWORK SSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} -e ssh ${STOREHOST}:"${dm_liste}" ${STOREHOST}:${RUN_DIR}/${DEST} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} -e ssh ${STOREHOST}:"${dm_liste}" ${STOREHOST}:${RUN_DIR}/${DEST} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} >> out_rsync 2>&1
-
-# 	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_Get : copy error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_Get"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_Get"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_GetBuffer
-#D-* Purpose: Get a file from ${SCRATCHDIR}
-#D-* Examples: IGCM_sys_GetBuffer myfile /destpath/myfile_with_PREFIX
-#D-            IGCM_sys_GetBuffer /l Array_contain_myfiles /destpath/
-function IGCM_sys_GetBuffer {
-  IGCM_debug_PushStack "IGCM_sys_GetBuffer" $@
-
-  typeset DEST RET buf_liste ifile target file_work 
-
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_GetBuffer :" $@
-  fi
-  if [ $DRYRUN -le 2 ]; then
-    if [ X${1} = X'/l' ] ; then
-      # test if the first file is present in the old computation :
-      eval set +A buf_liste \${${2}}
-    else
-      eval set +A buf_liste ${1}
-    fi
-    eval DEST=\${${#}}
-
-    #USUAL WAY
-    if [ X${1} = X'/l' ] ; then
-      (( RET=0 ))
-      for target in ${buf_liste[*]} ; do
-	local_file=$( basename ${target} )
-	\cp ${target} ${DEST}/${local_file} >> out_rsync 2>&1
-	(( RET = RET + $? ))
-      done
-    else
-      \cp ${buf_liste} ${DEST} >> out_rsync 2>&1
-      RET=$?
-    fi
-
-    if [ ${RET} -gt 0 ] ; then
-      echo "IGCM_sys_GetBuffer : copy error."
-      cat out_rsync
-      IGCM_debug_Exit "IGCM_sys_GetBuffer"
-    else
-      \rm out_rsync
-    fi
-  else
-    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-  fi
-  IGCM_debug_PopStack "IGCM_sys_GetBuffer"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_GetDate_FichWork
-#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
-#D-* Examples:
-#D-
-function IGCM_sys_GetDate_FichWork {
-  IGCM_debug_PushStack "IGCM_sys_FichWork" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_GetDate_FichWork :" $@
-  fi
-  typeset dateF
-  set +A dateF -- $( ls -l --full-time --time-style='+%Y%m%d%H%M%S' ${1} )
-  eval ${2}=${dateF[5]}
-
-    # donne la date filesys d'un fichier sur la machine work
-  IGCM_debug_PopStack "IGCM_sys_FichWork"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_GetDate_FichArchive
-#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE 
-#D-* Examples:
-#D-
-function IGCM_sys_GetDate_FichArchive {
-  IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_GetDate_FichArchive :" $@
-  fi
-  typeset dateF
-  set +A dateF -- $( ls -l --full-time --time-style='+%Y%m%d%H%M%S' ${1} )
-  eval ${2}=${dateF[5]}
-
-  IGCM_debug_PopStack "IGCM_sys_FichArchive"
-}
-
-##############################################################
-# REBUILD OPERATOR
-
-function IGCM_sys_rebuild {
-  IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_rebuild :" $@
-  fi
-  /home/cont003/p86ipsl/SX8/bin/rebuild -f -o $@
-  if [ $? -gt 0 ] ; then
-    echo "IGCM_sys_rebuild : erreur ${@}."
-    IGCM_debug_Exit "rebuild"
-  fi
-
-  IGCM_debug_PopStack "IGCM_sys_rebuild"
-}
-
-############################################################
-# Activate Running Environnment Variables
-
-function IGCM_sys_activ_variables {
-  IGCM_debug_PushStack "IGCM_sys_activ_variables"
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_activ_variables"
-  fi
-
-# --------------------------------------------------------------------
-#D- MPI specifications
-# --------------------------------------------------------------------
-
-#D-- MPISUSPEND
-  export MPISUSPEND=${MPISUSPEND:=OFF}
-
-#D-- MPIPROGINF #other choices : ALL_DETAIL2
-  export MPIPROGINF=ALL
-#D- activate ftrace (with -ftrace)
-  export F_FTRACE=YES
-#D- communication information (with -ftrace)
-  export MPICOMMINF=DETAIL
-
-# --------------------------------------------------------------------
-#D- Other specifications
-# --------------------------------------------------------------------
-
-#D- max number of character/line in output job
-  export F_SYSLEN=5000
-#D- number of error that can be admitted on the NEC
-  export F_ERRCNT=0
-#D- global performance
-  export F_PROGINF=DETAIL
-
-#D- I/O performance (FORTRAN I/O only not netCDF)
-  export F_FILEINF=${F_FILEINF:=NO}
-#D- netCDF I/O performance
-  export NC_FILEINF=${NC_FILEINF:=NO}
-
-  IGCM_debug_PopStack "IGCM_sys_activ_variables"
-}
-
-############################################################
-# Desactivate Running Environnment Variables
-
-function IGCM_sys_desactiv_variables {
-  IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_desactiv_variables"
-  fi
-# --------------------------------------------------------------------
-#D- MPI specifications
-# --------------------------------------------------------------------
-
-#D-- MPIPROGINF
-  export MPIPROGINF=NO
-
-# --------------------------------------------------------------------
-#D- Other specifications
-# --------------------------------------------------------------------
-
-#D- global performance
-  export F_PROGINF=NO  
-
-  IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
-}
-
-############################################################
-# Build run file
-
-function IGCM_sys_build_run_file {
-  IGCM_debug_PushStack "IGCM_sys_build_run_file" $@
-  if ( $DEBUG_sys ) ; then
-    echo "IGCM_sys_build_run_file " $@
-  fi
-  (( NUM_PROC_ATM = BATCH_NUM_PROC_TOT - 1 ))
-  (( NUM_PROC_OASIS = BATCH_NUM_PROC_TOT - NUM_PROC_ATM ))
-  (( NUM_PROC_OCE = BATCH_NUM_PROC_TOT - NUM_PROC_ATM ))
-  
-  if [ $1 = MPI2 ]; then
-    cat <<EOF > run_file
--p 1 -np 1 -e ./oasis
-EOF
-    (( NUM_PROCESS = BATCH_NUM_PROC_TOT + 1 ))
-    config_UserChoices_JobRunOptions='"-max_np ${NUM_PROCESS} -f"'
-
-  elif [ $1 = MPI1 ]; then
-    cat <<EOF > run_file
--p $NUM_PROC_OASIS -e ./oasis
--p $NUM_PROC_ATM -e ./lmdz.x
--p $NUM_PROC_OCE -e ./opa.xx
-EOF
-  fi
-  IGCM_debug_PopStack "IGCM_sys_build_run_file"
-}
-
-############################################################
-# Check of space available on temporary filesytems
-function IGCM_sys_check_quota {
-    IGCM_debug_PushStack "IGCM_sys_check_quota"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_check_quota"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_check_quota"
-}
Index: unk/libIGCM/libIGCM_sys/libIGCM_sys_platine.ksh
===================================================================
--- /trunk/libIGCM/libIGCM_sys/libIGCM_sys_platine.ksh	(revision 723)
+++ 	(revision )
@@ -1,1483 +1,0 @@
-#!/bin/ksh
-
-#**************************************************************
-# Author: Sebastien Denvil, Martial Mancip
-# Contact: Martial.Mancip__at__ipsl.jussieu.fr
-# $Revision::                                          $ Revision of last commit
-# $Author::                                            $ Author of last commit
-# $Date::                                              $ Date of last commit
-# IPSL (2006)
-#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
-#
-#**************************************************************
-
-#=========================================================
-# The documentation of this file can be automatically generated
-# if you use the prefix #D- for comments to be extracted. 
-# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
-#=========================================================
-
-#D-#==================================================
-#D-LibIGCM_sys for Platine
-#D-#==================================================
-#D-
-#D- This ksh library if a layer under some usefull 
-#D-environment variables and shell commands.
-#D-All those definitions depend on host particularities.
-#D-It manages a stack mechanism and test validity of operations.
-#D-All function described bellow must be prefixed by IGCM_sys.
-
-#====================================================
-# libIGCM_sys PARAMETERS
-#====================================================
-
-#====================================================
-# set DEBUG_sys to true to output calls of function
-typeset -r DEBUG_sys=${DEBUG_sys:=true}
-
-#====================================================
-# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
-typeset -r DRYRUN=${DRYRUN:=0}
-
-# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
-# -------------------------------------------------------------------------------------
-# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
-# |          |  Cp/Exe param files |            |  Chmod  |                           |
-# |          |      Qsub           |            |         |                           |
-# -------------------------------------------------------------------------------------
-# |    0     |       yes           |    yes     |  yes    |      yes                  |
-# -------------------------------------------------------------------------------------
-# |    1     |       yes           |    yes     |  yes    |      no                   |
-# -------------------------------------------------------------------------------------
-# |    2     |       yes           |    yes     |  no     |      no                   |
-# -------------------------------------------------------------------------------------
-# |    3     |       yes           |    no      |  no     |      no                   |
-# -------------------------------------------------------------------------------------
-
-#=====================================================
-# Global Variables :
-#=====================================================
-# Language : "fr" or "en"
-typeset -r MYLANG="fr"
-
-#=====================================================
-# Host and user names 
-# $hostname ou hostname
-typeset  HOST=${HOST:=$( hostname )}
-# $username ou whoami
-typeset  LOGIN=${LOGIN:=$( whoami )}
-# $hostname of the MASTER job
-typeset MASTER=platine
-
-#D-
-#D-#==================================================
-#D-Program used in libIGCM
-#D-#==================================================
-
-# rsync with path
-typeset -r RSYNC=/usr/bin/rsync
-# RSYNC_opt args to rsync
-typeset -r RSYNC_opt="-va"
-# ie storage filesystem
-typeset -r RHOST=platine
-
-#====================================================
-# Set environment tools (ferret, nco, cdo)
-#====================================================
-. /home/cont003/p86ipsl/.atlas_env_platine_ksh
-
-#====================================================
-# Specific for ocean additionnal diagnostic
-export FER_GO="$FER_GO /home/cont003/p86denv/IGCM_POST_UTIL/JNL /home/cont003/p86denv/GRAF /home/cont003/p86denv/GRAF/GO"
-export FER_PALETTE="$FER_PALETTE /home/cont003/p86denv/GRAF/PALET"
-
-#====================================================
-# Host specific DIRECTORIES
-#====================================================
-
-#====================================================
-#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
-typeset -r R_EXE="${MODIPSL}/bin"
-
-#====================================================
-#- SUBMIT_DIR : submission dir
-typeset SUBMIT_DIR=${SUBMIT_DIR:=${PWD}}
-
-#====================================================
-#- ARCHIVE
-typeset -r ARCHIVE=${DMFDIR}
-
-#====================================================
-#- libIGCM_POST
-typeset -r libIGCM_POST=${libIGCM}
-
-#====================================================
-#- IN
-typeset -r R_IN=${R_IN:=/dmnfs/cont003/p86ipsl/IGCM}
-typeset -r R_IN_ECMWF=${R_IN_ECMWF:=/dmnfs/cont003/p24data}
-
-#====================================================
-#- OUT
-typeset -r R_OUT=${ARCHIVE}/IGCM_OUT
-
-#====================================================
-#- OUT_SCR (ONLY FOR double copy an scratch)
-typeset -r R_OUT_SCR=${SCRATCHDIR}/IGCM_OUT
-
-#====================================================
-#- OUT_POST
-typeset -r R_OUT_POST=${SCRATCHDIR}/IGCM_OUT
-
-#====================================================
-#- RUN_DIR_PATH : Temporary working directory (=> TMP)
-if [ ! X${LSB_QUEUE} = Xmono ] ; then
-    typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${SCRATCHDIR}}
-else
-    typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${SCRATCHDIR}/TMPDIR_IGCM/tmp$$}
-fi
-
-#====================================================
-#- BIG_DIR : BIG_DIR to store files waiting for rebuild
-typeset -r BIG_DIR=${BIG_DIR:=${SCRATCHDIR}/REBUILD}
-
-#====================================================
-#- HOST_MPIRUN_COMMAND
-typeset -r HOST_MPIRUN_COMMAND=${HOST_MPIRUN_COMMAND:="time srun"}
-
-#====================================================
-#- Max number of arguments passed to nco operator or demigration command
-UNIX_MAX_LIMIT=360
-
-#D-#==================================================
-#D-function IGCM_sys_RshMaster
-#D-* Purpose: Just a fake command to wrapp
-#D-           IGCM_card call in post-treatment
-#D-           Ulam do not see brodie filesystem
-#D-           Cesium do not see all mercure filesystem
-#D-           That's why we need this hack.
-#D-* Examples:
-#D-
-function IGCM_sys_RshMaster {
-    IGCM_debug_PushStack "IGCM_sys_RshMaster" $@
-    /bin/ksh <<-EOF
-    export libIGCM=${libIGCM}
-    export DEBUG_debug=${DEBUG_debug}
-    . ${libIGCM}/libIGCM_debug/libIGCM_debug.ksh
-    . ${libIGCM}/libIGCM_card/libIGCM_card.ksh
-    ${@}
-EOF
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_RshMaster : erreur."
-	IGCM_debug_Exit "IGCM_sys_RshMaster"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_RshMaster"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_RshArchive
-#D-* Purpose: Archive rsh command
-#D-* Examples:
-#D-
-function IGCM_sys_RshArchive {
-    IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
-    /bin/ksh <<-EOF
-    ${@}
-EOF
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_RshArchive : erreur."
-	IGCM_debug_Exit "IGCM_sys_RshArchive"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_RshArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_RshPost
-#D-* Purpose: Post-process rsh command
-#D-* Examples:
-#D-
-function IGCM_sys_RshPost {
-    IGCM_debug_PushStack "IGCM_sys_RshPost" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_RshPost :" $@
-    fi
-    /bin/ksh ${@}
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_RshPost : erreur."
-	IGCM_debug_Exit "IGCM_sys_RshPost"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_RshPost"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_SendMail
-#D-* Purpose: Send mail when simulation is over
-#D-* Examples:
-#D-
-function IGCM_sys_SendMail {
-    IGCM_debug_PushStack "IGCM_sys_SendMailPost" $@
-    if ( $DEBUG_sys ) ; then
-       echo "IGCM_sys_SendMail :" $@
-    fi
-
-    if ( ${ExitFlag} ) ; then
-	status=failed
-    else
-	status=completed
-    fi
-    cat  << END_MAIL > job_end.mail
-Dear ${LOGIN},
-
-  Simulation ${config_UserChoices_JobName} is ${status} on supercomputer `hostname`.
-  Job started : ${DateBegin}
-  Job ended   : ${DateEnd}
-  Output files are available in ${R_SAVE}
-  Script files, Script Outputs and Debug files (if necessary) are available in ${SUBMIT_DIR}
-END_MAIL
-
-    if [ ! -z ${config_UserChoices_MailName} ] ; then
-	mailx -s "${config_UserChoices_JobName} ${status}" ${config_UserChoices_MailName} < job_end.mail
-    elif [ -f ~/.forward ] ; then
-	mailx -s "${config_UserChoices_JobName} ${status}" $( cat ~/.forward ) < job_end.mail
-    fi
-
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_SendMail : erreur."
-	IGCM_debug_Exit "IGCM_sys_SendMail"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_SendMail"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Mkdir
-#D-* Purpose: Master locale mkdir command
-#D-* Examples:
-#D-
-function IGCM_sys_Mkdir {
-    IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Mkdir :" $@
-    fi
-    if [ ! -d ${1} ]; then
-	\mkdir -p $1
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_Mkdir : erreur."
-	    IGCM_debug_Exit "IGCM_sys_Mkdir"
-	fi
-    fi
-    # vérification :
-    if [ ! -d ${1} ] ; then
-	echo "IGCM_sys_Mkdir : erreur."
-	IGCM_debug_Exit "IGCM_sys_Mkdir"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Mkdir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_MkdirArchive
-#D-* Purpose: Mkdir on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_MkdirArchive {
-    IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_MkdirArchive :" $@
-    fi
-    #- creation de repertoire sur le serveur fichier
-    if [ ! -d ${1} ]; then 
-	\mkdir -p $1
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_MkdirArchive : erreur."
-	    IGCM_debug_Exit "IGCM_sys_MkdirArchive"
-	fi
-    fi
-    IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_MkdirWork
-#D-* Purpose: Mkdir on Work
-#D-* Examples:
-#D-
-function IGCM_sys_MkdirWork {
-    IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_MkdirWork :" $@
-    fi
-    #- creation de repertoire sur le serveur fichier
-    if [ ! -d ${1} ]; then 
-	\mkdir -p $1
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_MkdirWork : erreur."
-	    IGCM_debug_Exit "IGCM_sys_MkdirWork"
-	fi
-    fi
-    IGCM_debug_PopStack "IGCM_sys_MkdirWork"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Cd
-#D-* Purpose: master cd command
-#D-* Examples:
-#D-
-function IGCM_sys_Cd {
-    IGCM_debug_PushStack "IGCM_sys_Cd" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Cd :" $@
-    fi
-    \cd $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_Cd : erreur."
-	IGCM_debug_Exit "IGCM_sys_Cd"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Cd"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Chmod
-#D-* Purpose: Chmod
-#D-* Examples:
-#D-
-function IGCM_sys_Chmod {
-    IGCM_debug_PushStack "IGCM_sys_Chmod" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Chmod :" $@
-    fi
-    if [ $DRYRUN -le 1 ]; then
-	\chmod $@
-	if [ $? -gt 0 ] ; then
-	    echo "IGCM_sys_Chmod : erreur."
-	    IGCM_debug_Exit "IGCM_sys_Chmod"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Chmod"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_FileSize
-#D-* Purpose: Filesize
-#D-* Examples:
-#D-
-function IGCM_sys_FileSize {
-    IGCM_debug_PushStack "IGCM_sys_FileSize" $@
-
-    typeset sizeF
-    set +A sizeF -- $( ls -la ${1} )
-    if [ $? -gt 0 ] ; then
-	IGCM_debug_Exit "IGCM_sys_FileSize"
-    fi
-    eval ${2}=${sizeF[4]}
-
-    IGCM_debug_PopStack "IGCM_sys_FileSize"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestDir
-#D-* Purpose: Test Directory that must exists
-#D-* Examples:
-#D-
-function IGCM_sys_TestDir {
-    IGCM_debug_PushStack "IGCM_sys_TestDir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_TestDir :" $@
-    fi
-    typeset ExistFlag
-    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
-    IGCM_debug_PopStack "IGCM_sys_TestDir"
-
-    return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestDirArchive
-#D-* Purpose: Test Directory that must exists on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_TestDirArchive {
-    IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_TestDirArchive :" $@
-    fi
-    typeset ExistFlag
-    ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
-    IGCM_debug_PopStack "IGCM_sys_TestDirArchive"
-
-    return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_TestFileArchive
-#D-* Purpose: Test file that must NOT EXISTS on Archive
-#D-* Examples:
-#D-
-function IGCM_sys_TestFileArchive {
-    IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
-    typeset ExistFlag
-    ExistFlag=$( [ -f $1 ] && echo 0 || echo 1 )
-    IGCM_debug_PopStack "IGCM_sys_TestFileArchive"
-
-    return ${ExistFlag}
-}
-
-#D-#==================================================
-#D-function IGCM_sys_CountFileArchive
-#D-* Purpose: Count files on Archive filesystem
-#D-* Examples:
-#D-
-function IGCM_sys_CountFileArchive {
-    IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
-    ls ${@} 2>/dev/null | wc -l
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_CountFileArchive : erreur."
-    fi
-    IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Tree
-#D-* Purpose: Tree directories with files on ${ARCHIVE}
-#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
-#D-
-function IGCM_sys_Tree {
-    IGCM_debug_PushStack "IGCM_sys_Tree" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Tree :" $@
-    fi
-
-    \tree -f $@
-
-    IGCM_debug_PopStack "IGCM_sys_Tree"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Tar
-#D-* Purpose: master un-tar command
-#D-* Examples:
-#D-
-function IGCM_sys_Tar {
-    IGCM_debug_PushStack "IGCM_sys_Tar" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Tar :" $@
-    fi
-    \tar cvf $@
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_Tar : erreur."
-	IGCM_debug_Exit "IGCM_sys_Tar"
-    fi
-    \tar tvf $1
-
-    IGCM_debug_PopStack "IGCM_sys_Tar"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_UnTar
-#D-* Purpose: master un-tar command
-#D-* Examples:
-#D-
-function IGCM_sys_UnTar {
-    IGCM_debug_PushStack "IGCM_sys_UnTar" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_UnTar :" $@
-    fi
-    \tar xvf $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_UnTar : erreur."
-	IGCM_debug_Exit "IGCM_sys_UnTar"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_UnTar"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Qsub
-#D-* Purpose: Qsub new job
-#D-* Examples:
-#D-
-function IGCM_sys_Qsub {
-    IGCM_debug_PushStack "IGCM_sys_Qsub" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Qsub :" $@
-    fi
-    bsub -o ${Script_Output} -J ${config_UserChoices_JobName}.${CumulPeriod} < $1
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_Qsub : erreur " $@
-	IGCM_debug_Exit "IGCM_sys_Qsub"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Qsub"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_QsubPost
-#D-* Purpose: Qsub new job on scalaire
-#D-* Examples:
-#D-
-function IGCM_sys_QsubPost {
-    IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_QsubPost :" $@
-    fi
-    bsub -o ${POST_DIR}/${Script_Post_Output}.out < ${libIGCM_POST}/$1.job
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_QsubPost : erreur " $@
-	IGCM_debug_Exit "IGCM_sys_QsubPost"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_QsubPost"
-}
-
-#D-*************************
-#D- File transfer functions 
-#D-*************************
-#D-
-
-#D-#==================================================
-#D-function IGCM_sys_Rsync_out
-#D-* Purpose: treat return val of rsync
-#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
-#D-  Error values and explanations can depend on your system version.
-function IGCM_sys_Rsync_out {
-    RET=$1
-    if [ ! $RET ] ; then
-	echo "rsync error !"
-    fi
-
-    if [ $MYLANG = "fr" ]; then
-	case $RET in
-	    0)  return ;;
-	    1)  echo "Erreur de rsync ; RERR_SYNTAX : "
-		echo "Erreur de syntaxe ou d'utilisation."
-		return;;
-	    2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
-		echo "Incompatibilité de protocole."
-		return;;
-	    3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
-		echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
-		echo "répertoires"
-		return;;
-	    4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
-		echo "Action demandée non supportée : une tentative de manipulation de"
-		echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
-		echo "été faite ; ou une option qui est supportée par le  client  mais"
-		echo "pas par le serveur a été spécifiée."
-		return;;
-	    10) echo "Erreur de rsync ; RERR_SOCKETIO"
-		echo "Erreur dans le socket d'entrée sortie"
-		return;;
-	    11) echo "Erreur de rsync ; RERR_FILEIO"
-		echo "Erreur d'entrée sortie fichier"
-		return;;
-	    12) echo "Erreur de rsync ; RERR_STREAMIO"
-		echo "Erreur dans flux de donnée du protocole rsync"
-		return;;
-	    13) echo "Erreur de rsync ; RERR_MESSAGEIO"
-		echo "Erreur avec les diagnostics du programme"
-		return;;
-	    14) echo "Erreur de rsync ; RERR_IPC"
-		echo "Erreur dans le code IPC"
-		return;;
-	    20) echo "Erreur de rsync ; RERR_SIGNAL"
-		echo "SIGUSR1 ou SIGINT reçu"
-		return;;
-	    21) echo "Erreur de rsync ; RERR_WAITCHILD"
-		echo "Une erreur retournée par waitpid()"
-		return;;
-	    22) echo "Erreur de rsync ; RERR_MALLOC"
-		echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
-		return;;
-	    23) echo ""
-                echo "Erreur fichier inexistant"
-		return;;
-	    30) echo "Erreur de rsync ; RERR_TIMEOUT"
-		echo "Temps d'attente écoulé dans l'envoi/réception de données"
-		return;;
-	    *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
-		return;;
-	esac
-    elif [ $MYLANG = "en" ] ; then
-	case $RET in
-	    0)  return;;		
-	    1)  echo "rsync error : Syntax or usage error "
-		return;;
-	    2)  echo "rsync error : Protocol incompatibility "
-		return;;
-	    3)  echo "rsync error : Errors selecting input/output files, dirs"
-		return;;
-	    4)  echo "rsync error : Requested action not supported: an attempt"
-		echo "was made to manipulate 64-bit files on a platform that cannot support"
-		echo "them; or an option was specified that is supported by the client and"
-		echo "not by the server."
-		return;;
-	    5)  echo "rsync error : Error starting client-server protocol"
-		return;;
-	    10) echo "rsync error : Error in socket I/O "
-		return;;
-	    11) echo "rsync error : Error in file I/O "
-		return;;
-	    12) echo "rsync error : Error in rsync protocol data stream "
-		return;;
-	    13) echo "rsync error : Errors with program diagnostics "
-		return;;
-	    14) echo "rsync error : Error in IPC code "
-		return;;
-	    20) echo "rsync error : Received SIGUSR1 or SIGINT "
-		return;;
-	    21) echo "rsync error : Some error returned by waitpid() "
-		return;;
-	    22) echo "rsync error : Error allocating core memory buffers "
-		return;;
-	    23) echo "rsync error : Partial transfer due to error"
-		return;;
-	    24) echo "rsync error : Partial transfer due to vanished source files"
-		return;;
-	    30) echo "rsync error : Timeout in data send/receive "
-		return;;
-	    *)  echo "rsync error : return code of rsync unknown :" $RET
-		return;;
-	esac
-    else
-	echo "unknown language $MYLANG."
-	return
-    fi
-}
-    
-#D-#==================================================
-#D-function IGCM_sys_Cp
-#D-* Purpose: generic cp
-#D-* Examples:
-#D-
-function IGCM_sys_Cp {
-    IGCM_debug_PushStack "IGCM_sys_Cp" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Cp :" $@
-    fi
-
-    typeset RET
-
-    echo cp $@ > out_rsync 2>&1
-    \cp $@ >> out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-	echo "IGCM_sys_Cp : error."
-	cat out_rsync
-	IGCM_debug_Exit "IGCM_sys_Cp"
-     else
-	 \rm out_rsync
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Cp"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Rm
-#D-* Purpose: generic rm
-#D-* Examples:
-#D-
-function IGCM_sys_Rm {
-    IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Rm :" $@
-    fi
-
-    typeset RET
-
-    echo rm $@ > out_rsync 2>&1
-    \rm $@ >> out_rsync 2>&1
-    RET=$?
-
-    if [ ${RET} -gt 0 ] ; then
-	echo "IGCM_sys_Rm : error."
-	cat out_rsync
-	IGCM_debug_Exit "IGCM_sys_Rm"
-    else
-	\rm out_rsync
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Rm"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_RmRunDir
-#D-* Purpose: rm tmpdir (dummy function most of the time batch
-#D-                      scheduler will do the job)
-#D-* Examples:
-#D-
-function IGCM_sys_RmRunDir {
-    IGCM_debug_PushStack "IGCM_sys_RmRunDir" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_RmRunDir :" $@
-	echo "Dummy call, let the scheduler do that."
-    fi
-    IGCM_debug_PopStack "IGCM_sys_RmRunDir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Mv
-#D-* Purpose: generic move
-#D-* Examples:
-#D-
-function IGCM_sys_Mv {
-    IGCM_debug_PushStack "IGCM_sys_Mv" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Mv :" $@
-    fi
-
-    if [ $DRYRUN = 0 ]; then
-
-        typeset RET
-            
-        echo mv $@ > out_rsync 2>&1
-        \mv $@ >> out_rsync 2>&1
-        RET=$?
-    
-        if [ ${RET} -gt 0 ] ; then
-            echo "IGCM_sys_Mv : error in mv."
-            cat out_rsync
-            IGCM_debug_Exit "IGCM_sys_Mv"
-	else
-	    \rm out_rsync
-        fi
-    else
-        ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_Mv"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Dir
-#D-* Purpose: Copy a complete directory on $(ARCHIVE)
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Dir {
-    IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Dir :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -d ${1} ] ; then
-	    echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
-	    return
-	fi
-
-	typeset RET
-
-	# Only if we use rsync
-	#IGCM_sys_TestDirArchive $( dirname $2 )
-	#
-	#USUAL WAY
-	\cp -r $1 $2 > out_rsync 2>&1
-  	RET=$?
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Dir : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Put_Dir"
-	else
-	    \rm out_rsync
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Dir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get_Dir
-#D-* Purpose: Copy a complete directory from $(ARCHIVE)
-#D-* Examples:
-#D-
-function IGCM_sys_Get_Dir {
-    IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Get_Dir :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-#	if [ ! -d ${1} ] ; then
-#	    echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
-#	    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
-#	    return
-#	fi
-
-	typeset RET
-
-	# Only if we use rsync
-	#IGCM_sys_TestDirArchive $( dirname $2 )
-	#
-	#USUAL WAY
-	\cp -r $1 $2 > out_rsync 2>&1
-  	RET=$?
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get_Dir : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Get_Dir"
-	else
-	    \rm out_rsync
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Get_Dir"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get_Master
-#D-* Purpose: Copy a complete directory from MASTER filesystem
-#D-* Examples:
-#D-
-function IGCM_sys_Get_Master {
-    IGCM_debug_PushStack "IGCM_sys_Get_Master" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Get_Master :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-        if ( [ ! -d ${1} ] && [ ! -f ${1} ] ) ; then
-	    echo "WARNING : IGCM_sys_Get_Master ${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Get_Master"
-	    return
-	fi
-
-	typeset RET
-
-	#USUAL WAY
-	\cp -r $1 $2 > out_rsync 2>&1
-  	RET=$?
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get_Master : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Get_Master"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Get_Master"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Rest
-#D-* Purpose: Put computied restarts on $(ARCHIVE).
-#D-           File and target directory must exist.
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Rest {
-    IGCM_debug_PushStack "IGCM_sys_Put_Rest" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Rest :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -f ${1} ] ; then
-	    echo "ERROR : IGCM_sys_Put_Rest ${1} DOES NOT EXIST ."
-	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
-	fi
-
-	typeset RET
-	#
-	if [ X${JobType} = XRUN ] ; then
-	    IGCM_sys_Chmod 444 ${1}
-	fi
-	#
-	IGCM_sys_TestDirArchive $( dirname $2 )
-	#
-	# USUAL WAY
-	putfer $1 $2 > out_rsync 2>&1
-        RET=$?
-
-# 	#RSYNC WITH NETWORK RSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
-
-#  	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Rest : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Put_Rest"
-	else
-	    \rm out_rsync
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Rest"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Out
-#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Out {
-    IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Out :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -f ${1} ] ; then
-	    echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Put_Out"
-	    return 1
-	fi
-	#
-	IGCM_sys_MkdirArchive $( dirname $2 )
-        #
-	typeset RET
-        #
-	if [ X${JobType} = XRUN ] ; then
-	    if [ X${3} = X ] ; then
-		IGCM_sys_Chmod 444 ${1}
-	    fi
-	fi
-	#
-        # USUAL WAY
-	putfer $1 $2 > out_rsync 2>&1
-	RET=$?
-
-# 	#RSYNC WITH NETWORK RSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} -e ssh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
-
-#  	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Out : error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Put_Out"
-	else
-	    \rm out_rsync
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Out"
-    return 0
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Get
-#D-* Purpose: Get a file from ${ARCHIVE}
-#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
-#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
-function IGCM_sys_Get {
-    IGCM_debug_PushStack "IGCM_sys_Get" $@
-
-    typeset DEST RET dm_liste ifile target file_work 
-
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Get :" $@
-    fi
-    if [ $DRYRUN -le 2 ]; then
-	if [ X${1} = X'/l' ] ; then
-            # test if the first file is present in the old computation :
-	    eval set +A dm_liste \${${2}}
-	else
-	    eval set +A dm_liste ${1}
-	fi
-	eval DEST=\${${#}}
-
-	#=====================================================
-        #         COMMENT OUT DOUBLE COPY ON SCRATCHDIR
-        #=====================================================
-
-	# Is it an R_OUT file (not R_IN) ?
-	#echo ${dm_liste[0]} | grep "${R_OUT}" > /dev/null 2>&1
-	#if [ $? -eq 0 ] ; then
-	#    # Yes  ? then we try to get it in SCRATCHDIR
-	#    set +A file_work $( echo ${dm_liste[*]} | sed -e "s|${R_OUT}|${R_OUT_SCR}|g" )
-	#    if [ -f ${file_work[0]} ] ; then
-	#	IGCM_sys_Cp ${file_work[*]} ${DEST}
-	#	IGCM_debug_PopStack "IGCM_sys_Get"
-	#	return
-	#    fi
-	#fi
-
-	# test if the (first) file is present in the old computation :
-	IGCM_sys_TestFileArchive ${dm_liste[0]}
-	RET=$?
-        if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
-	    IGCM_debug_Exit "IGCM_sys_Get"
-	    #IGCM_debug_PopStack "IGCM_sys_Get"
-	    #return
-	fi
-
-#	dmget ${dm_liste[*]} > out_rsync 2>&1
-#  	RET=$?
-#  	if [ ${RET} -gt 0 ] ; then
-#  	    echo "IGCM_sys_Get : demigration error."
-#  	    cat out_rsync
-#  	    IGCM_debug_Exit "IGCM_sys_Get"
-#	    IGCM_debug_PopStack "IGCM_sys_Get"
-#	    return
-#  	fi
-
-        #USUAL WAY
-	(( RET=0 ))
-	if [ X${1} = X'/l' ] ; then
-	    (( RET=0 ))
-	    for target in ${dm_liste[*]} ; do
-		local_file=$( basename ${target} )
-		\cp ${target} ${DEST}/${local_file} >> out_rsync 2>&1
-		(( RET = RET + $? ))
-	    done
-	else
-	    \cp ${dm_liste} ${DEST} >> out_rsync 2>&1
-	    RET=$?
-	fi
-
-# 	#RSYNC WITH NETWORK RSH CALL
-# 	echo ${RSYNC} ${RSYNC_opt} -e ssh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} > out_rsync 2>&1
-# 	${RSYNC} ${RSYNC_opt} -e ssh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} >> out_rsync 2>&1
-
-#  	#RSYNC WITH NFS USE
-#  	echo ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} > out_rsync 2>&1
-#  	${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} >> out_rsync 2>&1
-
-# 	RET=$?
-#  	IGCM_sys_Rsync_out $RET
-
-#  	${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
-#  	(( RET=RET+$? ))
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Get : copy error."
-	    cat out_rsync
-	    IGCM_debug_Exit "IGCM_sys_Get"
-	else
-	    \rm out_rsync
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Get"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Dods_Rm
-#D-* Purpose: DO NOTHING ! Put $(ARCHIVE) files on DODS internet protocole.
-#D-* Examples:
-#D-
-function IGCM_sys_Dods_Rm {
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Dods_Rm :" $@
-    fi
-    typeset RET
-    RET=0
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -d /dmnfs/cont003/dods/public/${LOGIN}/${R_DODS}/${1} ] ; then
-	    echo "WARNING : IGCM_sys_Dods_Rm /dmnfs/cont003/dods/public/${LOGIN}/${R_DODS}/${1} DOES NOT EXIST ."
-	    echo "Nothing has been done."
-	    return
-	fi
-	dods_rm public/${LOGIN}/${R_DODS}/${1} #> out_dods_rm 2>&1
-	RET=$?
-        
-#	if [ ${RET} -gt 0 ] ; then
-#	    echo "IGCM_sys_Put_Dods : error."
-#	    cat out_dods_rm
-#	    IGCM_debug_Exit "IGCM_sys_Dods_Rm"
-#	else
-#	    rm out_dods_rm
-#	fi
-
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    return $RET
-}
-
-
-#D-#==================================================
-#D-function IGCM_sys_Dods_Cp
-#D-* Purpose: Copy $(ARCHIVE) files on DODS internet protocole.
-#D-* Examples:
-#D-
-function IGCM_sys_Dods_Cp {
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Dods_Cp :" $@
-    fi
-    typeset RET
-    RET=0
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -d ${R_SAVE}/${1} ] ; then
-	    echo "WARNING : IGCM_sys_Dods_Cp ${R_SAVE}/${1} DOES NOT EXIST ."
-	    echo "Nothing has been done."
-	    return
-	fi
-	#
-	dods_cp ${1} public/${LOGIN}/${R_DODS} #> out_dods_cp 2>&1
-	RET=$?
-        
-#	if [ ${RET} -gt 0 ] ; then
-#	    echo "IGCM_sys_Dods_Cp : error."
-#	    cat out_dods_cp
-#	    IGCM_debug_Exit "IGCM_sys_Dods_Cp"
-#	else
-#	    rm out_dods_cp
-#	fi
-
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    return $RET
-}
-
-#D-#==================================================
-#D-function IGCM_sys_Put_Dods
-#D-* Purpose: Put $(ARCHIVE) files on DODS internet protocole.
-#D-* Examples:
-#D-
-function IGCM_sys_Put_Dods {
-    IGCM_debug_PushStack "IGCM_sys_Put_Dods" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_Put_Dods :" $@
-    fi
-    if [ $DRYRUN = 0 ]; then
-	if [ ! -d ${R_SAVE}/${1} ] ; then
-	    echo "WARNING : IGCM_sys_Put_Dods ${R_SAVE}/${1} DOES NOT EXIST ."
-	    IGCM_debug_PopStack "IGCM_sys_Put_Dods"
-	    return
-	fi
-
-	typeset RET
-	#
-	cd ${R_SAVE}
-	IGCM_sys_Dods_Rm ${1}
-	IGCM_sys_Dods_Cp ${1}
-	RET=0
-
-	if [ ${RET} -gt 0 ] ; then
-	    echo "IGCM_sys_Put_Dods : error."
-	    IGCM_debug_Exit "IGCM_sys_Put_Dods"
-	fi
-    else
-	( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
-    fi
-    IGCM_debug_PopStack "IGCM_sys_Put_Dods"
-}
-
-############################################################## A FINIR !!
-
-#D-#==================================================
-#D-function IGCM_sys_GetDate_FichWork
-#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
-#D-* Examples:
-#D-
-function IGCM_sys_GetDate_FichWork {
-    IGCM_debug_PushStack "IGCM_sys_FichWork" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_GetDate_FichWork :" $@
-    fi
-    # donne la date filesys d'un fichier sur la machine work
-    IGCM_debug_PopStack "IGCM_sys_FichWork"
-}
-
-#D-#==================================================
-#D-function IGCM_sys_GetDate_FichArchive
-#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE 
-#D-* Examples:
-#D-
-function IGCM_sys_GetDate_FichArchive {
-    IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_GetDate_FichArchive :" $@
-    fi
-    IGCM_debug_PopStack "IGCM_sys_FichArchive"
-}
-
-##############################################################
-# REBUILD OPERATOR
-
-function IGCM_sys_rebuild {
-    IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_rebuild :" $@
-    fi
-    /home/cont003/p86ipsl/IA64/bin/rebuild -f -o $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_rebuild : erreur ${@}."
-       IGCM_debug_Exit "rebuild"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_rebuild"
-}
-
-##############################################################
-# NCO OPERATOR
-
-function IGCM_sys_ncap2 {
-    IGCM_debug_PushStack "IGCM_sys_ncap2" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncap2 :" $@
-    fi
-    /applications/nco/bin/ncap2 "$@"
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncap2 : erreur ${@}."
-       IGCM_debug_Exit "ncap2"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncap2"
-}
-
-function IGCM_sys_ncatted {
-    IGCM_debug_PushStack "IGCM_sys_ncatted" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncatted :" $@
-    fi
-    /usr/local/bin/ncatted "$@"
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncatted : erreur ${@}."
-       IGCM_debug_Exit "ncatted"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncatted"
-}
-
-function IGCM_sys_ncbo {
-    IGCM_debug_PushStack "IGCM_sys_ncbo" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncbo :" $@
-    fi
-    /applications/nco/bin/ncbo $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncbo : erreur ${@}."
-       IGCM_debug_Exit "ncbo"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncbo"
-}
-
-function IGCM_sys_ncdiff {
-    IGCM_debug_PushStack "IGCM_sys_ncdiff" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncdiff :" $@
-    fi
-    /applications/nco/bin/ncdiff $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncdiff : erreur ${@}."
-       IGCM_debug_Exit "ncdiff"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncdiff"
-}
-
-function IGCM_sys_ncea {
-    IGCM_debug_PushStack "IGCM_sys_ncea" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncea :" $@
-    fi
-    /applications/nco/bin/ncea $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncea : erreur ${@}."
-       IGCM_debug_Exit "ncea"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncea"
-}
-
-function IGCM_sys_ncecat {
-    IGCM_debug_PushStack "IGCM_sys_ncecat" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncecat :" $@
-    fi
-    /applications/nco/bin/ncecat $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncecat : erreur ${@}."
-       IGCM_debug_Exit "ncecat"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncecat"
-}
-
-function IGCM_sys_ncflint {
-    IGCM_debug_PushStack "IGCM_sys_ncflint" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncflint :" $@
-    fi
-    /usr/local/bin/ncflint $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncflint : erreur ${@}."
-       IGCM_debug_Exit "ncflint"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncflint"
-}
-
-function IGCM_sys_ncks {
-    IGCM_debug_PushStack "IGCM_sys_ncks" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncks :" $@
-    fi
-    /applications/nco/bin/ncks $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncks : erreur ${@}."
-       IGCM_debug_Exit "ncks"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncks"
-}
-
-function IGCM_sys_ncpdq {
-    IGCM_debug_PushStack "IGCM_sys_ncpdq" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncpdq :" $@
-    fi
-    /applications/nco/bin/ncpdq $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncpdq : erreur ${@}."
-       IGCM_debug_Exit "ncpdq"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncpdq"
-}
-
-function IGCM_sys_ncra {
-    IGCM_debug_PushStack "IGCM_sys_ncra" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncra :" $@
-    fi
-    /applications/nco/bin/ncra $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncra : erreur ${@}."
-       IGCM_debug_Exit "ncra"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncra"
-}
-
-function IGCM_sys_ncrcat {
-    IGCM_debug_PushStack "IGCM_sys_ncrcat" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncrcat :" $@
-    fi
-    /applications/nco/bin/ncrcat $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncrcat : erreur ${@}."
-#       IGCM_debug_Exit "ncrcat"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncrcat"
-}
-
-function IGCM_sys_ncrename {
-    IGCM_debug_PushStack "IGCM_sys_ncrename" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncrename :" $@
-    fi
-    /applications/nco/bin/ncrename $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncrename : erreur ${@}."
-       IGCM_debug_Exit "ncrename"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncrename"
-}
-
-function IGCM_sys_ncwa {
-    IGCM_debug_PushStack "IGCM_sys_ncwa" -- $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_ncwa :" $@
-    fi
-    /applications/nco/bin/ncwa $@
-    if [ $? -gt 0 ] ; then
-       echo "IGCM_sys_ncwa : erreur ${@}."
-       IGCM_debug_Exit "ncwa"
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_ncwa"
-}
-
-##############################################################
-# CDO OPERATOR
-
-function IGCM_sys_cdo {
-    IGCM_debug_PushStack "IGCM_sys_cdo" -- $@
-
-    \cdo $@
-    if [ $? -gt 0 ] ; then
-	echo "IGCM_sys_cdo : erreur ${@}."
-	IGCM_debug_PopStack "IGCM_sys_cdo"
-	return 1
-    else
-	IGCM_debug_PopStack "IGCM_sys_cdo"
-	return 0
-    fi
-
-    IGCM_debug_PopStack "IGCM_sys_cdo"
-}
-
-############################################################
-# Activate Running Environnment Variables
-
-function IGCM_sys_activ_variables {
-    IGCM_debug_PushStack "IGCM_sys_activ_variables"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_activ_variables"
-    fi
-    ulimit -s 2097152
-    IGCM_debug_PopStack "IGCM_sys_activ_variables"
-}
-
-############################################################
-# Desactivate Running Environnment Variables
-
-function IGCM_sys_desactiv_variables {
-    IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_desactiv_variables"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
-}
-
-############################################################
-# Build run file
-
-function IGCM_sys_build_run_file {
-    IGCM_debug_PushStack "IGCM_sys_build_run_file" $@
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_build_run_file " $@
-    fi
-    NUM_PROC_OCE=1
-    (( NUM_PROC_ATM = $BATCH_NUM_PROC_TOT - NUM_PROC_OCE - 1))
-    (( nb_tot_m1    = $BATCH_NUM_PROC_TOT - NUM_PROC_OCE ))
-    if [ $1 = MPI1 ]; then
-	cat <<EOF > run_file
-#!/bin/bash
-if [ \$SLURM_PROCID -eq 0 ]
-  then ./oasis ;
-elif ( [ \$SLURM_PROCID -ge 1 ] && [ \$SLURM_PROCID -lt ${nb_tot_m1} ] )
-  then ./lmdz.x ;
-else ./opa.xx ;
-fi
-EOF
-	config_UserChoices_JobRunOptions='"-n ${BATCH_NUM_PROC_TOT}"'
-	IGCM_sys_Chmod u+x run_file
-    fi
-    IGCM_debug_PopStack "IGCM_sys_build_run_file"
-  
-}
-
-############################################################
-# Check of space available on temporary filesytems
-function IGCM_sys_check_quota {
-    IGCM_debug_PushStack "IGCM_sys_check_quota"
-    if ( $DEBUG_sys ) ; then
-	echo "IGCM_sys_check_quota"
-    fi
-    IGCM_debug_PopStack "IGCM_sys_check_quota"
-}
