source: trunk/libIGCM/libIGCM_sys/libIGCM_sys_ulam.ksh @ 622

Last change on this file since 622 was 622, checked in by sdipsl, 12 years ago
  • Hopefully end of the merge story
  • Property svn:keywords set to Revision Author Date
File size: 34.7 KB
Line 
1#!/bin/ksh
2
3#**************************************************************
4# Author: Sebastien Denvil
5# Contact: Sebastien.Denvil__at__ipsl.jussieu.fr
6# $Revision::                                          $ Revision of last commit
7# $Author::                                            $ Author of last commit
8# $Date::                                              $ Date of last commit
9# IPSL (2006)
10#  This software is governed by the CeCILL licence see libIGCM/libIGCM_CeCILL.LIC
11#
12#**************************************************************
13
14#=========================================================
15# The documentation of this file can be automatically generated
16# if you use the prefix #D- for comments to be extracted.
17# Extract with command: cat lib* | grep "^#D-" | cut -c "4-"
18#=========================================================
19
20#D-#==================================================
21#D-LibIGCM_sys for Ulam
22#D-#==================================================
23#D-
24#D- This ksh library if a layer under some usefull
25#D-environment variables and shell commands.
26#D-All those definitions depend on host particularities.
27#D-It manages a stack mechanism and test validity of operations.
28#D-All function described bellow must be prefixed by IGCM_sys.
29
30#====================================================
31# libIGCM_sys PARAMETERS
32#====================================================
33
34#====================================================
35# set DEBUG_sys to true to output calls of function
36typeset -r DEBUG_sys=${DEBUG_sys:=true}
37
38#====================================================
39# Turn in dry run mode ? (sys_Put_Rest, sys_Put_Out, sys_Get)
40typeset -r DRYRUN=${DRYRUN:=0}
41
42# YOU MUST COMPILE YOUR EXE FILES FOR DRYRUN MODE !
43# -------------------------------------------------------------------------------------
44# | DRYRUN=  |  Date computations, | sys_Get    |  Exe    | sys_Put_Out; sys_Put_Rest |
45# |          |  Cp/Exe param files |            |  Chmod  |                           |
46# |          |      Qsub           |            |         |                           |
47# -------------------------------------------------------------------------------------
48# |    0     |       yes           |    yes     |  yes    |      yes                  |
49# -------------------------------------------------------------------------------------
50# |    1     |       yes           |    yes     |  yes    |      no                   |
51# -------------------------------------------------------------------------------------
52# |    2     |       yes           |    yes     |  no     |      no                   |
53# -------------------------------------------------------------------------------------
54# |    3     |       yes           |    no      |  no     |      no                   |
55# -------------------------------------------------------------------------------------
56
57#=====================================================
58# Global Variables :
59#=====================================================
60# Language : "fr" or "en"
61typeset -r MYLANG="fr"
62
63#=====================================================
64# Host and user names
65# $hostname ou hostname
66typeset  HOST=${HOST:=$( hostname )}
67# $username ou whoami
68typeset  LOGIN=${LOGIN:=$( whoami )}
69
70#D-
71#D-#==================================================
72#D-Program used in libIGCM
73#D-#==================================================
74
75# rsync with path
76typeset -r RSYNC=/usr/bin/rsync
77# RSYNC_opt args to rsync
78typeset -r RSYNC_opt="-Lt -v"
79# RSYNC_opt args to "remote rsync"
80# ie storage filesystem
81typeset -r RHOST=gaya.idris.fr
82typeset -r REMOTE_RSYNC=/u/rech/ces/rces452/RSYNC/bin/rsync
83
84#====================================================
85# Set environment tools (ferret, nco, cdo)
86#====================================================
87. /home/rech/psl/rpsl035/.atlas_env_ulam_bash
88
89#====================================================
90# Host specific DIRECTORIES
91#====================================================
92
93#====================================================
94#- R_EXE   (==> BIN_DIR = ${MODIPSL}/bin )
95typeset -r R_EXE="${MODIPSL}/bin"
96
97#====================================================
98#- SUBMIT_DIR : submission dir
99typeset SUBMIT_DIR=${SUBMIT_DIR:=${LOADL_STEP_INITDIR}}
100
101#====================================================
102#- ARCHIVE
103# modified 17/10/2011 /u to be used for file stored on gaya
104if (tty -s ) then
105  typeset -r ARCHIVE=${HOMEGAYA}
106else
107  typeset -r ARCHIVE=$(echo ${HOMEGAYA}|sed 's,/homegaya/,/u/',)
108fi
109
110#====================================================
111#- IN
112typeset -r R_IN=${R_IN:=/u/rech/psl/rpsl035/IGCM}
113typeset -r R_IN_ECMWF=${R_IN_ECMWF:=/u/rech/psl/rpsl376}
114
115#====================================================
116#- OUT
117typeset -r R_OUT=${ARCHIVE}/IGCM_OUT
118
119#====================================================
120#- R_BUF  Buffer to pack files stored on Master
121typeset -r R_BUF=${WORKDIR}/IGCM_OUT
122
123#====================================================
124#- OUT_POST
125typeset -r R_OUT_POST=${WORKDIR}/IGCM_OUT
126
127#====================================================
128#- RUN_DIR_PATH : Temporary working directory (=> TMP)
129typeset -r RUN_DIR_PATH=${RUN_DIR_PATH:=${TMPDIR}}
130
131#====================================================
132#- Max number of arguments passed to nco operator or demigration command
133UNIX_MAX_LIMIT=120
134
135#D-#==================================================
136#D-function IGCM_sys_RshMaster
137#D-* Purpose: Master rsh command
138#D-* Examples:
139#D-
140function IGCM_sys_RshMaster {
141    #set -vx
142  IGCM_debug_PushStack "IGCM_sys_RshMaster" $@
143  rsh ${MASTER} exec /bin/ksh <<-EOF
144    export libIGCM=${libIGCM_SX}
145    export DEBUG_debug=${DEBUG_debug}
146    . ${libIGCM_SX}/libIGCM_debug/libIGCM_debug.ksh
147    . ${libIGCM_SX}/libIGCM_card/libIGCM_card.ksh
148    ${@}
149EOF
150  if [ $? -gt 0 ] ; then
151    echo "IGCM_sys_RshMaster : erreur."
152    IGCM_debug_Exit "IGCM_sys_RshMaster"
153  fi
154  IGCM_debug_PopStack "IGCM_sys_RshMaster"
155}
156
157#D-#==================================================
158#D-function IGCM_sys_RshArchive
159#D-* Purpose: Archive rsh command
160#D-* Examples:
161#D-
162function IGCM_sys_RshArchive {
163  IGCM_debug_PushStack "IGCM_sys_RshArchive" $@
164  /bin/ksh <<-EOF
165    ${@}
166EOF
167  if [ $? -gt 0 ] ; then
168    echo "IGCM_sys_RshArchive : erreur."
169    IGCM_debug_Exit "IGCM_sys_RshArchive"
170  fi
171  IGCM_debug_PopStack "IGCM_sys_RshArchive"
172}
173
174#D-#==================================================
175#D-function IGCM_sys_RshPost
176#D-* Purpose: Master rsh command
177#D-* Examples:
178#D-
179function IGCM_sys_RshPost {
180  IGCM_debug_PushStack "IGCM_sys_RshPost" $@
181  if ( $DEBUG_sys ) ; then
182    echo "IGCM_sys_RshPost :" $@
183  fi
184  /bin/ksh ${@}
185  if [ $? -gt 0 ] ; then
186    echo "IGCM_sys_RshPost : erreur."
187    IGCM_debug_Exit "IGCM_sys_RshPost"
188  fi
189  IGCM_debug_PopStack "IGCM_sys_RshPost"
190}
191
192#D-#==================================================
193#D-function IGCM_sys_SendMail
194#D-* Purpose: Send mail when simulation is over
195#D-* Examples:
196#D-
197function IGCM_sys_SendMail {
198  IGCM_debug_PushStack "IGCM_sys_SendMailPost" $@
199  if ( $DEBUG_sys ) ; then
200    echo "IGCM_sys_SendMail :" $@
201  fi
202
203  if ( ${ExitFlag} ) ; then
204    status=failed
205  else
206    status=completed
207  fi
208  cat  << END_MAIL > job_end.mail
209Dear ${LOGIN},
210
211  Simulation ${config_UserChoices_JobName} is ${status} on supercomputer `hostname`.
212  Job started : ${DateBegin}
213  Job ended   : ${DateEnd}
214  Output files are available in ${R_SAVE}
215  Script files, Script Outputs and Debug files (if necessary) are available in ${SUBMIT_DIR}
216END_MAIL
217
218  if [ ! -z ${config_UserChoices_MailName} ] ; then
219    mailx -s "${config_UserChoices_JobName} ${status}" ${config_UserChoices_MailName} < job_end.mail
220  elif [ -f ~/.forward ] ; then
221    mailx -s "${config_UserChoices_JobName} ${status}" $( cat ~/.forward ) < job_end.mail
222  fi
223
224  if [ $? -gt 0 ] ; then
225    echo "IGCM_sys_SendMail : erreur."
226    IGCM_debug_Exit "IGCM_sys_SendMail"
227  fi
228  IGCM_debug_PopStack "IGCM_sys_SendMail"
229}
230
231#D-#==================================================
232#D-function IGCM_sys_Mkdir
233#D-* Purpose: Master locale mkdir command
234#D-* Examples:
235#D-
236function IGCM_sys_Mkdir {
237  IGCM_debug_PushStack "IGCM_sys_Mkdir" $@
238  if ( $DEBUG_sys ) ; then
239    echo "IGCM_sys_Mkdir :" $@
240  fi
241  if [ ! -d ${1} ]; then
242    \mkdir -p $1
243    if [ $? -gt 0 ] ; then
244      echo "IGCM_sys_Mkdir : erreur."
245      IGCM_debug_Exit "IGCM_sys_Mkdir"
246    fi
247  fi
248    # vérification :
249  if [ ! -d ${1} ] ; then
250    echo "IGCM_sys_Mkdir : erreur."
251    IGCM_debug_Exit "IGCM_sys_Mkdir"
252  fi
253  IGCM_debug_PopStack "IGCM_sys_Mkdir"
254}
255
256#D-#==================================================
257#D-function IGCM_sys_MkdirArchive
258#D-* Purpose: Mkdir on Archive
259#D-* Examples:
260#D-
261function IGCM_sys_MkdirArchive {
262  IGCM_debug_PushStack "IGCM_sys_MkdirArchive" $@
263  if ( $DEBUG_sys ) ; then
264    echo "IGCM_sys_MkdirArchive :" $@
265  fi
266    #- creation de repertoire sur le serveur fichier
267  if [ ! -d ${1} ]; then
268    \mkdir -p $1
269    if [ $? -gt 0 ] ; then
270      echo "IGCM_sys_MkdirArchive : erreur."
271      IGCM_debug_Exit "IGCM_sys_MkdirArchive"
272    fi
273  fi
274  IGCM_debug_PopStack "IGCM_sys_MkdirArchive"
275}
276
277#D-#==================================================
278#D-function IGCM_sys_MkdirWork
279#D-* Purpose: Mkdir on Work
280#D-* Examples:
281#D-
282function IGCM_sys_MkdirWork {
283  IGCM_debug_PushStack "IGCM_sys_MkdirWork" $@
284  if ( $DEBUG_sys ) ; then
285    echo "IGCM_sys_MkdirWork :" $@
286  fi
287    #- creation de repertoire sur le serveur fichier
288  if [ ! -d ${1} ]; then
289    \mkdir -p $1
290    if [ $? -gt 0 ] ; then
291      echo "IGCM_sys_MkdirWork : erreur."
292      IGCM_debug_Exit "IGCM_sys_MkdirWork"
293    fi
294  fi
295  IGCM_debug_PopStack "IGCM_sys_MkdirWork"
296}
297
298#D-#==================================================
299#D-function IGCM_sys_Cd
300#D-* Purpose: master cd command
301#D-* Examples:
302#D-
303function IGCM_sys_Cd {
304  IGCM_debug_PushStack "IGCM_sys_Cd" $@
305  if ( $DEBUG_sys ) ; then
306    echo "IGCM_sys_Cd :" $@
307  fi
308  \cd $1
309  if [ $? -gt 0 ] ; then
310    echo "IGCM_sys_Cd : erreur."
311    IGCM_debug_Exit "IGCM_sys_Cd"
312  fi
313  IGCM_debug_PopStack "IGCM_sys_Cd"
314}
315
316#D-#==================================================
317#D-function IGCM_sys_Chmod
318#D-* Purpose: Chmod
319#D-* Examples:
320#D-
321function IGCM_sys_Chmod {
322  IGCM_debug_PushStack "IGCM_sys_Chmod" $@
323  if ( $DEBUG_sys ) ; then
324    echo "IGCM_sys_Chmod :" $@
325  fi
326  if [ $DRYRUN -le 1 ]; then
327    \chmod $@
328    if [ $? -gt 0 ] ; then
329      echo "IGCM_sys_Chmod : erreur."
330      IGCM_debug_Exit "IGCM_sys_Chmod"
331    fi
332  else
333    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
334  fi
335  IGCM_debug_PopStack "IGCM_sys_Chmod"
336}
337
338#D-#==================================================
339#D-function IGCM_sys_FileSize
340#D-* Purpose: Filesize
341#D-* Examples:
342#D-
343function IGCM_sys_FileSize {
344  IGCM_debug_PushStack "IGCM_sys_FileSize" $@
345
346  typeset sizeF
347  set +A sizeF -- $( ls -la ${1} )
348  if [ $? -gt 0 ] ; then
349    IGCM_debug_Exit "IGCM_sys_FileSize"
350  fi
351  eval ${2}=${sizeF[4]}
352
353  IGCM_debug_PopStack "IGCM_sys_FileSize"
354}
355
356#D-#==================================================
357#D-function IGCM_sys_TestDir
358#D-* Purpose: Test Directory that must exists
359#D-* Examples:
360#D-
361function IGCM_sys_TestDir {
362  IGCM_debug_PushStack "IGCM_sys_TestDir" $@
363  if ( $DEBUG_sys ) ; then
364    echo "IGCM_sys_TestDir :" $@
365  fi
366  typeset ExistFlag
367  ExistFlag=$( [ -d $1 ] && echo 0 || echo 1 )
368  IGCM_debug_PopStack "IGCM_sys_TestDir"
369
370  return ${ExistFlag}
371}
372
373#D-#==================================================
374#D-function IGCM_sys_TestDirArchive
375#D-* Purpose: Test Directory that must exists on Archive
376#D-* Examples:
377#D-
378function IGCM_sys_TestDirArchive {
379  IGCM_debug_PushStack "IGCM_sys_TestDirArchive" $@
380  if ( $DEBUG_sys ) ; then
381    echo "IGCM_sys_TestDirArchive :" $@
382  fi
383  typeset ExistFlag DirNameToTest
384    # modified 17/10/2011 /u is not known on ulam, use /homegaya instead to test dir locally on ulam
385  DirNameToTest=$(echo $1 | sed 's,/u/,/homegaya/,')
386  ExistFlag=$( [ -d ${DirNameToTest} ] && echo 0 || echo 1 )
387  IGCM_debug_PopStack "IGCM_sys_TestDirArchive"
388
389  return ${ExistFlag}
390}
391
392#D-#==================================================
393#D-function IGCM_sys_TestFileArchive
394#D-* Purpose: Test file that must NOT EXISTS on Archive
395#D-* Examples:
396#D-
397function IGCM_sys_TestFileArchive {
398  IGCM_debug_PushStack "IGCM_sys_TestFileArchive" $@
399  if ( $DEBUG_sys ) ; then
400    echo "IGCM_sys_TestFileArchive :" $@
401  fi
402  typeset ExistFlag FileNameToTest
403    # modified 17/10/2011 /u is not known on ulam, use /homegaya instead to test dir locally on ulam
404  FileNameToTest=$(echo $1 | sed 's,/u/,/homegaya/,')
405  ExistFlag=$( IGCM_sys_RshArchive "[ -f ${FileNameToTest} ] && echo 0 || echo 1" )
406  IGCM_debug_PopStack "IGCM_sys_TestFileArchive"
407
408  return ${ExistFlag}
409}
410
411#D-#==================================================
412#D-function IGCM_sys_CountFileArchive
413#D-* Purpose: Count files on Archive filesystem
414#D-* Examples:
415#D-
416function IGCM_sys_CountFileArchive {
417  IGCM_debug_PushStack "IGCM_sys_CountFileArchive" $@
418  IGCM_sys_RshArchive "ls ${@} 2>/dev/null | wc -l"
419  if [ $? -gt 0 ] ; then
420    echo "IGCM_sys_CountFileArchive : erreur."
421  fi
422  IGCM_debug_PopStack "IGCM_sys_CountFileArchive"
423}
424
425#D-#==================================================
426#D-function IGCM_sys_Tree
427#D-* Purpose: Tree directories with files on ${ARCHIVE}
428#D-* Examples: IGCM_sys_Tree ${R_IN} ${R_OUT}
429#D-
430function IGCM_sys_Tree {
431  IGCM_debug_PushStack "IGCM_sys_Tree" $@
432  if ( $DEBUG_sys ) ; then
433    echo "IGCM_sys_Tree :" $@
434  fi
435
436  \mfls -r $@
437
438  IGCM_debug_PopStack "IGCM_sys_Tree"
439}
440
441#D-#==================================================
442#D-function IGCM_sys_Tar
443#D-* Purpose: master un-tar command
444#D-* Examples:
445#D-
446function IGCM_sys_Tar {
447  IGCM_debug_PushStack "IGCM_sys_Tar" $@
448  if ( $DEBUG_sys ) ; then
449    echo "IGCM_sys_Tar :" $@
450  fi
451  \tar cvf $@
452  if [ $? -gt 0 ] ; then
453    echo "IGCM_sys_Tar : erreur."
454    IGCM_debug_Exit "IGCM_sys_Tar"
455  fi
456  \tar tvf $1
457
458  IGCM_debug_PopStack "IGCM_sys_Tar"
459}
460
461#D-#==================================================
462#D-function IGCM_sys_UnTar
463#D-* Purpose: master un-tar command
464#D-* Examples:
465#D-
466function IGCM_sys_UnTar {
467  IGCM_debug_PushStack "IGCM_sys_UnTar" $@
468  if ( $DEBUG_sys ) ; then
469    echo "IGCM_sys_UnTar :" $@
470  fi
471  \tar xvf $1
472  if [ $? -gt 0 ] ; then
473    echo "IGCM_sys_UnTar : erreur."
474    IGCM_debug_Exit "IGCM_sys_UnTar"
475  fi
476  IGCM_debug_PopStack "IGCM_sys_UnTar"
477}
478
479#D-#==================================================
480#D-function IGCM_sys_QsubPost
481#D-* Purpose: Qsub new job on scalaire
482#D-* Examples:
483#D-
484function IGCM_sys_QsubPost {
485  IGCM_debug_PushStack "IGCM_sys_QsubPost" $@
486  if ( $DEBUG_sys ) ; then
487    echo "IGCM_sys_QsubPost :" $@
488  fi
489  cd ${POST_DIR}
490  /opt/ibmll/LoadL/full/bin/llsubmit ${libIGCM}/$1.job
491  cd -
492  if [ $? -gt 0 ] ; then
493    echo "IGCM_sys_QsubPost : erreur " $@
494    IGCM_debug_Exit "IGCM_sys_QsubPost"
495  fi
496  IGCM_debug_PopStack "IGCM_sys_QsubPost"
497}
498
499#D-*************************
500#D- File transfer functions
501#D-*************************
502#D-
503
504#D-#==================================================
505#D-function IGCM_sys_Rsync_out
506#D-* Purpose: treat return val of rsync
507#D-* Examples: IGCM_sys_Rsync_out out_RET_rsync
508#D-  Error values and explanations can depend on your system version.
509function IGCM_sys_Rsync_out {
510  RET=$1
511  if [ ! $RET ] ; then
512    echo "rsync error !"
513  fi
514
515  if [ $MYLANG = "fr" ]; then
516    case $RET in
517    0)  return ;;
518    1)  echo "Erreur de rsync ; RERR_SYNTAX : "
519      echo "Erreur de syntaxe ou d'utilisation."
520      return;;
521    2)  echo "Erreur de rsync ; RERR_PROTOCOL : "
522      echo "Incompatibilité de protocole."
523      return;;
524    3)  echo "Erreur de rsync ; RERR_FILESELECT 3"
525      echo "Erreurs  lors  de  la  sélection des fichiers d'entrée sortie et"
526      echo "répertoires"
527      return;;
528    4)  echo "Erreur de rsync ; RERR_UNSUPPORTED"
529      echo "Action demandée non supportée : une tentative de manipulation de"
530      echo "fichiers  64-bits  sur une plate-forme qui ne les supporte pas a"
531      echo "été faite ; ou une option qui est supportée par le  client  mais"
532      echo "pas par le serveur a été spécifiée."
533      return;;
534    10) echo "Erreur de rsync ; RERR_SOCKETIO"
535      echo "Erreur dans le socket d'entrée sortie"
536      return;;
537    11) echo "Erreur de rsync ; RERR_FILEIO"
538      echo "Erreur d'entrée sortie fichier"
539      return;;
540    12) echo "Erreur de rsync ; RERR_STREAMIO"
541      echo "Erreur dans flux de donnée du protocole rsync"
542      return;;
543    13) echo "Erreur de rsync ; RERR_MESSAGEIO"
544      echo "Erreur avec les diagnostics du programme"
545      return;;
546    14) echo "Erreur de rsync ; RERR_IPC"
547      echo "Erreur dans le code IPC"
548      return;;
549    20) echo "Erreur de rsync ; RERR_SIGNAL"
550      echo "SIGUSR1 ou SIGINT reçu"
551      return;;
552    21) echo "Erreur de rsync ; RERR_WAITCHILD"
553      echo "Une erreur retournée par waitpid()"
554      return;;
555    22) echo "Erreur de rsync ; RERR_MALLOC"
556      echo "Erreur lors de l'allocation des tampons de mémoire de coeur"
557      return;;
558    23) echo ""
559      echo "Erreur fichier inexistant"
560      return;;
561    30) echo "Erreur de rsync ; RERR_TIMEOUT"
562      echo "Temps d'attente écoulé dans l'envoi/réception de données"
563      return;;
564    *)  echo "Erreur de rsync : code de retour de rsync inconnu :" $RET
565      return;;
566    esac
567  elif [ $MYLANG = "en" ] ; then
568    case $RET in
569    0)  return;;
570    1)  echo "rsync error : Syntax or usage error "
571      return;;
572    2)  echo "rsync error : Protocol incompatibility "
573      return;;
574    3)  echo "rsync error : Errors selecting input/output files, dirs"
575      return;;
576    4)  echo "rsync error : Requested action not supported: an attempt"
577      echo "was made to manipulate 64-bit files on a platform that cannot support"
578      echo "them; or an option was specified that is supported by the client and"
579      echo "not by the server."
580      return;;
581    5)  echo "rsync error : Error starting client-server protocol"
582      return;;
583    10) echo "rsync error : Error in socket I/O "
584      return;;
585    11) echo "rsync error : Error in file I/O "
586      return;;
587    12) echo "rsync error : Error in rsync protocol data stream "
588      return;;
589    13) echo "rsync error : Errors with program diagnostics "
590      return;;
591    14) echo "rsync error : Error in IPC code "
592      return;;
593    20) echo "rsync error : Received SIGUSR1 or SIGINT "
594      return;;
595    21) echo "rsync error : Some error returned by waitpid() "
596      return;;
597    22) echo "rsync error : Error allocating core memory buffers "
598      return;;
599    23) echo "rsync error : Partial transfer due to error"
600      return;;
601    24) echo "rsync error : Partial transfer due to vanished source files"
602      return;;
603    30) echo "rsync error : Timeout in data send/receive "
604      return;;
605    *)  echo "rsync error : return code of rsync unknown :" $RET
606      return;;
607    esac
608  else
609    echo "unknown language $MYLANG."
610    return
611  fi
612}
613
614#D-#==================================================
615#D-function IGCM_sys_Cp
616#D-* Purpose: generic cp
617#D-* Examples:
618#D-
619function IGCM_sys_Cp {
620  IGCM_debug_PushStack "IGCM_sys_Cp" $@
621  if ( $DEBUG_sys ) ; then
622    echo "IGCM_sys_Cp :" $@
623  fi
624
625  typeset RET
626
627  echo cp $@ > out_rsync 2>&1
628  \cp $@ >> out_rsync 2>&1
629  RET=$?
630
631  if [ ${RET} -gt 0 ] ; then
632    echo "IGCM_sys_Cp : error."
633    cat out_rsync
634    IGCM_debug_Exit "IGCM_sys_Cp"
635  fi
636  IGCM_debug_PopStack "IGCM_sys_Cp"
637}
638
639#D-#==================================================
640#D-function IGCM_sys_Rm
641#D-* Purpose: generic rm
642#D-* Examples:
643#D-
644function IGCM_sys_Rm {
645  IGCM_debug_PushStack "IGCM_sys_Rm" -- $@
646  if ( $DEBUG_sys ) ; then
647    echo "IGCM_sys_Rm :" $@
648  fi
649
650  typeset RET
651
652  echo rm $@ > out_rsync 2>&1
653  \rm $@ >> out_rsync 2>&1
654  RET=$?
655
656  if [ ${RET} -gt 0 ] ; then
657    echo "IGCM_sys_Rm : error."
658    cat out_rsync
659    IGCM_debug_Exit "IGCM_sys_Rm"
660  fi
661  IGCM_debug_PopStack "IGCM_sys_Rm"
662}
663
664#D-#==================================================
665#D-function IGCM_sys_RmRunDir
666#D-* Purpose: rm tmpdir (dummy function most of the time batch
667#D-                      scheduler will do the job)
668#D-* Examples:
669#D-
670function IGCM_sys_RmRunDir {
671  IGCM_debug_PushStack "IGCM_sys_RmRunDir" -- $@
672  if ( $DEBUG_sys ) ; then
673    echo "IGCM_sys_RmRunDir :" $@
674    echo "Dummy call, let the scheduler do that."
675  fi
676  IGCM_debug_PopStack "IGCM_sys_RmRunDir"
677}
678
679#D-#==================================================
680#D-function IGCM_sys_Mv
681#D-* Purpose: generic move
682#D-* Examples:
683#D-
684function IGCM_sys_Mv {
685  IGCM_debug_PushStack "IGCM_sys_Mv" $@
686  if ( $DEBUG_sys ) ; then
687    echo "IGCM_sys_Mv :" $@
688  fi
689
690  if [ $DRYRUN = 0 ]; then
691
692    typeset RET
693
694    echo mv $@ > out_rsync 2>&1
695    \mv $@ >> out_rsync 2>&1
696    RET=$?
697
698    if [ ${RET} -gt 0 ] ; then
699      echo "IGCM_sys_Mv : error in mv."
700      cat out_rsync
701      IGCM_debug_Exit "IGCM_sys_Mv"
702    fi
703  else
704    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
705  fi
706
707  IGCM_debug_PopStack "IGCM_sys_Mv"
708}
709
710#D-#==================================================
711#D-function IGCM_sys_Put_Dir
712#D-* Purpose: Copy a complete directory on $(ARCHIVE)
713#D-* Examples:
714#D-
715function IGCM_sys_Put_Dir {
716  IGCM_debug_PushStack "IGCM_sys_Put_Dir" $@
717  if ( $DEBUG_sys ) ; then
718    echo "IGCM_sys_Put_Dir :" $@
719  fi
720  if [ $DRYRUN = 0 ]; then
721    if [ ! -d ${1} ] ; then
722      echo "WARNING : IGCM_sys_Put_Dir ${1} DOES NOT EXIST ."
723      IGCM_debug_PopStack "IGCM_sys_Put_Dir"
724      return
725    fi
726
727    typeset RET
728
729    # Only if we use rsync
730    #IGCM_sys_TestDirArchive $( dirname $2 )
731    #
732    #USUAL WAY
733    rcp -r $1 gaya:$2 > out_rsync 2>&1
734    RET=$?
735
736    if [ ${RET} -gt 0 ] ; then
737      echo "IGCM_sys_Put_Dir : error."
738      cat out_rsync
739      IGCM_debug_Exit "IGCM_sys_Put_Dir"
740    fi
741
742    # due to rcommand latency
743    sleep 10
744
745  else
746    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
747  fi
748  IGCM_debug_PopStack "IGCM_sys_Put_Dir"
749}
750
751#D-#==================================================
752#D-function IGCM_sys_Get_Dir
753#D-* Purpose: Copy a complete directory from $(ARCHIVE)
754#D-* Examples:
755#D-
756function IGCM_sys_Get_Dir {
757  IGCM_debug_PushStack "IGCM_sys_Get_Dir" $@
758  if ( $DEBUG_sys ) ; then
759    echo "IGCM_sys_Get_Dir :" $@
760  fi
761  if [ $DRYRUN = 0 ]; then
762
763#       if [ ! -d ${1} ] ; then
764#           echo "WARNING : IGCM_sys_Get_Dir ${1} DOES NOT EXIST ."
765#           IGCM_debug_PopStack "IGCM_sys_Get_Dir"
766#           return
767#       fi
768
769    typeset RET
770
771    #USUAL WAY
772    rcp -rp gaya:$1 $2 > out_rsync 2>&1
773    RET=$?
774
775    if [ ${RET} -gt 0 ] ; then
776      echo "IGCM_sys_Get_Dir : error."
777      cat out_rsync
778      IGCM_debug_Exit "IGCM_sys_Get_Dir"
779    fi
780  else
781    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
782  fi
783  IGCM_debug_PopStack "IGCM_sys_Get_Dir"
784}
785
786#D-#==================================================
787#D-function IGCM_sys_Get_Master
788#D-* Purpose: Copy a complete directory from MASTER filesystem
789#D-* Examples:
790#D-
791function IGCM_sys_Get_Master {
792  IGCM_debug_PushStack "IGCM_sys_Get_Master" $@
793  if ( $DEBUG_sys ) ; then
794    echo "IGCM_sys_Get_Master :" $@
795  fi
796  if [ $DRYRUN = 0 ]; then
797    TEST=$( IGCM_sys_RshMaster [ -d $1 ] && echo 1 || echo 0 )
798    if [ ${TEST} -ne 1 ] ; then
799      echo "WARNING : IGCM_sys_Get_Master ${1} DOES NOT EXIST ON ${MASTER}."
800      IGCM_debug_PopStack "IGCM_sys_Get_Master"
801      return
802    fi
803
804    typeset RET
805
806    #USUAL WAY
807    rcp -r ${MASTER}:$1 $2 > out_rsync 2>&1
808    RET=$?
809
810    if [ ${RET} -gt 0 ] ; then
811      echo "IGCM_sys_Get_Master : error."
812      cat out_rsync
813      IGCM_debug_Exit "IGCM_sys_Get_Master"
814    fi
815  else
816    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
817  fi
818  IGCM_debug_PopStack "IGCM_sys_Get_Master"
819}
820
821#D-#==================================================
822#D-function IGCM_sys_Put_Out
823#D-* Purpose: Copy a file on $(ARCHIVE) after have chmod it in readonly
824#D-* Examples:
825#D-
826function IGCM_sys_Put_Out {
827  IGCM_debug_PushStack "IGCM_sys_Put_Out" $@
828  if ( $DEBUG_sys ) ; then
829    echo "IGCM_sys_Put_Out :" $@
830  fi
831  if [ $DRYRUN = 0 ]; then
832    if [ ! -f ${1} ] ; then
833      echo "WARNING : IGCM_sys_Put_Out ${1} DOES NOT EXIST ."
834      IGCM_debug_PopStack "IGCM_sys_Put_Out"
835      return 1
836    fi
837
838    typeset RET
839        #
840    if [ X${JobType} = XRUN ] ; then
841      if [ X${3} = X ] ; then
842        IGCM_sys_Chmod 444 ${1}
843      fi
844    fi
845    #
846    #
847    # USUAL WAY
848    mfput $1 $2 > out_rsync 2>&1
849    RET=$?
850
851#       #RSYNC WITH NETWORK RSH CALL
852#       echo ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} > out_rsync 2>&1
853#       ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RUN_DIR}/$1 ${RHOST}:${2} >> out_rsync 2>&1
854
855#       #RSYNC WITH NFS USE
856#       echo ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} > out_rsync 2>&1
857#       ${RSYNC} ${RSYNC_opt} ${RUN_DIR}/$1 ${2} >> out_rsync 2>&1
858
859#       RET=$?
860#       IGCM_sys_Rsync_out $RET
861
862#       ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
863#       (( RET=RET+$? ))
864
865    if [ ${RET} -gt 0 ] ; then
866      echo "IGCM_sys_Put_Out : error."
867      cat out_rsync
868      IGCM_debug_Print 1 "mfput failed. Make a second try :"
869            #
870      mfput $1 $2 > out_rsync 2>&1
871      RET=$?
872            #
873      if [ ${RET} -gt 0 ] ; then
874        echo "IGCM_sys_Put_Out : error."
875        IGCM_debug_Print 1 "mfput failed twice. You have a problem"
876        cat out_rsync
877        IGCM_debug_Exit "IGCM_sys_Put_Out"
878      fi
879    fi
880  else
881    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
882  fi
883  IGCM_debug_PopStack "IGCM_sys_Put_Out"
884  return 0
885}
886
887#D-#==================================================
888#D-function IGCM_sys_Get
889#D-* Purpose: Get a file from ${ARCHIVE}
890#D-* Examples: IGCM_sys_Get myfile /destpath/myfile_with_PREFIX
891#D-            IGCM_sys_Get /l Array_contain_myfiles /destpath/
892function IGCM_sys_Get {
893  IGCM_debug_PushStack "IGCM_sys_Get" $@
894
895  typeset DEST RET dm_liste ifile target
896
897  if ( $DEBUG_sys ) ; then
898    echo "IGCM_sys_Get :" $@
899  fi
900  if [ $DRYRUN -le 2 ]; then
901    if [ X${1} = X'/l' ] ; then
902      # test if the first file is present in the old computation :
903      eval set +A dm_liste \${${2}}
904    else
905      dm_liste=${1}
906    fi
907    eval DEST=\${${#}}
908
909    # test if the (first) file is present in the old computation :
910    IGCM_sys_TestFileArchive ${dm_liste[0]}
911    RET=$?
912    if [ ${RET} -gt 0 ] ; then
913      echo "IGCM_sys_Get, ERROR : regular file ${dm_liste[0]} DOES NOT EXIST ."
914      IGCM_debug_Exit "IGCM_sys_Get"
915      #IGCM_debug_PopStack "IGCM_sys_Get"
916      #return
917    fi
918
919    # SD : dm_liste is not suited for computing job
920    #      because we change filename during transfert
921    #      dm_liste is better suited for post-treatment
922    # SD : dm_liste necessary only with RSYNC
923
924    #dm_liste=" "
925    #(( ifile=1 ))
926    #while [ $ifile -lt $# ] ; do
927    #    dm_liste=$( eval echo ${dm_liste[*]} " "\${${ifile}} )
928    #    (( ifile = ifile + 1 ))
929    #done
930    #DEST=$( eval echo \${${#}} )
931
932    #USUAL WAY
933    mfget ${dm_liste[*]} ${DEST} > out_rsync 2>&1
934
935#   #RSYNC WITH NETWORK RSH CALL
936#   echo ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} > out_rsync 2>&1
937#   ${RSYNC} ${RSYNC_opt} --rsync-path=${REMOTE_RSYNC} -e rsh ${RHOST}:"${dm_liste}" ${RHOST}:${RUN_DIR}/${DEST} >> out_rsync 2>&1
938
939#   #RSYNC WITH NFS USE
940#   echo ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} > out_rsync 2>&1
941#   ${RSYNC} ${RSYNC_opt} ${dm_liste} ${RUN_DIR}/${DEST} >> out_rsync 2>&1
942
943#   RET=$?
944#   IGCM_sys_Rsync_out $RET
945
946#   ${libIGCM}/libIGCM_sys/IGCM_analyse_rsync_out.awk out_rsync
947#   (( RET=RET+$? ))
948
949  else
950    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
951  fi
952  IGCM_debug_PopStack "IGCM_sys_Get"
953}
954
955#D-#==================================================
956#D-function IGCM_sys_Put_Dods
957#D-* Purpose: Put $(ARCHIVE) files on DODS internet protocole.
958#D-* Examples:
959#D-
960function IGCM_sys_Put_Dods {
961  IGCM_debug_PushStack "IGCM_sys_Put_Dods" $@
962  if ( $DEBUG_sys ) ; then
963    echo "IGCM_sys_Put_Dods :" $@
964  fi
965  if [ $DRYRUN = 0 ]; then
966    # We take our time on that
967    sleep 10
968    IGCM_sys_TestDirArchive ${R_SAVE}/${1}
969    if [ $? != 0 ] ; then
970      echo "WARNING : IGCM_sys_Put_Dods ${R_SAVE}/${1} DOES NOT EXIST ."
971      IGCM_debug_PopStack "IGCM_sys_Put_Dods"
972      return
973    fi
974
975    typeset RET
976    #
977    rsh gaya exec /bin/ksh <<EOF
978          cd ${R_SAVE}
979          /usr/local/bin/dods_rm DODS/pub/${LOGIN}/${R_DODS}/${1} > /dev/null 2>&1
980          /bin/chmod -R u+w ${R_SAVE}/${1}
981          /usr/local/bin/dods_cp ${1} DODS/pub/${LOGIN}/${R_DODS} > /dev/null 2>&1
982          /bin/chmod -R +rX ${R_SAVE}/${1}
983          /bin/chmod -R u+w ${R_SAVE}/${1}
984EOF
985    RET=$?
986
987    if [ ${RET} -gt 0 ] ; then
988      echo "IGCM_sys_Put_Dods : error."
989      IGCM_debug_Exit "IGCM_sys_Put_Dods"
990    fi
991  else
992    ( ${DEBUG_debug} ) && echo "DRYRUN mode = " $DRYRUN >> stack
993  fi
994  IGCM_debug_PopStack "IGCM_sys_Put_Dods"
995}
996
997############################################################## A FINIR !!
998
999#D-#==================================================
1000#D-function IGCM_sys_GetDate_FichWork
1001#D-* Purpose: donne la date filesys d'un fichier sur le filesystem WORK
1002#D-* Examples:
1003#D-
1004function IGCM_sys_GetDate_FichWork {
1005  IGCM_debug_PushStack "IGCM_sys_FichWork" $@
1006  if ( $DEBUG_sys ) ; then
1007    echo "IGCM_sys_GetDate_FichWork :" $@
1008  fi
1009    # donne la date filesys d'un fichier sur la machine work
1010  IGCM_debug_PopStack "IGCM_sys_FichWork"
1011}
1012
1013#D-#==================================================
1014#D-function IGCM_sys_GetDate_FichArchive
1015#D-* Purpose: donne la date filesys d'un fichier sur le filesystem ARCHIVE
1016#D-* Examples:
1017#D-
1018function IGCM_sys_GetDate_FichArchive {
1019  IGCM_debug_PushStack "IGCM_sys_FichArchive" $@
1020  if ( $DEBUG_sys ) ; then
1021    echo "IGCM_sys_GetDate_FichArchive :" $@
1022  fi
1023  IGCM_debug_PopStack "IGCM_sys_FichArchive"
1024}
1025
1026##############################################################
1027# REBUILD OPERATOR
1028
1029function IGCM_sys_rebuild {
1030  IGCM_debug_PushStack "IGCM_sys_rebuild" -- $@
1031  if ( $DEBUG_sys ) ; then
1032    echo "IGCM_sys_rebuild :" $@
1033  fi
1034  /home/rech/psl/rpsl035/bin/rebuild -f -o $@
1035  if [ $? -gt 0 ] ; then
1036    echo "IGCM_sys_rebuild : erreur ${@}."
1037    IGCM_debug_Exit "rebuild"
1038  fi
1039
1040  IGCM_debug_PopStack "IGCM_sys_rebuild"
1041}
1042##############################################################
1043# NCO OPERATOR
1044
1045function IGCM_sys_ncap2 {
1046  IGCM_debug_PushStack "IGCM_sys_ncap2" -- $@
1047  if ( $DEBUG_sys ) ; then
1048    echo "IGCM_sys_ncap2 :" $@
1049  fi
1050  ncap2 "$@"
1051  if [ $? -gt 0 ] ; then
1052    echo "IGCM_sys_ncap2 : erreur ${@}."
1053    IGCM_debug_Exit "ncap2"
1054  fi
1055
1056  IGCM_debug_PopStack "IGCM_sys_ncap2"
1057}
1058
1059function IGCM_sys_ncatted {
1060  IGCM_debug_PushStack "IGCM_sys_ncatted" -- $@
1061  if ( $DEBUG_sys ) ; then
1062    echo "IGCM_sys_ncatted :" $@
1063  fi
1064  ncatted "$@"
1065  if [ $? -gt 0 ] ; then
1066    echo "IGCM_sys_ncatted : erreur ${@}."
1067    IGCM_debug_Exit "ncatted"
1068  fi
1069
1070  IGCM_debug_PopStack "IGCM_sys_ncatted"
1071}
1072
1073function IGCM_sys_ncbo {
1074  IGCM_debug_PushStack "IGCM_sys_ncbo" -- $@
1075  if ( $DEBUG_sys ) ; then
1076    echo "IGCM_sys_ncbo :" $@
1077  fi
1078  ncbo $@
1079  if [ $? -gt 0 ] ; then
1080    echo "IGCM_sys_ncbo : erreur ${@}."
1081    IGCM_debug_Exit "ncbo"
1082  fi
1083
1084  IGCM_debug_PopStack "IGCM_sys_ncbo"
1085}
1086
1087function IGCM_sys_ncdiff {
1088  IGCM_debug_PushStack "IGCM_sys_ncdiff" -- $@
1089  if ( $DEBUG_sys ) ; then
1090    echo "IGCM_sys_ncdiff :" $@
1091  fi
1092  ncdiff $@
1093  if [ $? -gt 0 ] ; then
1094    echo "IGCM_sys_ncdiff : erreur ${@}."
1095    IGCM_debug_Exit "ncdiff"
1096  fi
1097
1098  IGCM_debug_PopStack "IGCM_sys_ncdiff"
1099}
1100
1101function IGCM_sys_ncea {
1102  IGCM_debug_PushStack "IGCM_sys_ncea" -- $@
1103  if ( $DEBUG_sys ) ; then
1104    echo "IGCM_sys_ncea :" $@
1105  fi
1106  ncea $@
1107  if [ $? -gt 0 ] ; then
1108    echo "IGCM_sys_ncea : erreur ${@}."
1109    IGCM_debug_Exit "ncea"
1110  fi
1111
1112  IGCM_debug_PopStack "IGCM_sys_ncea"
1113}
1114
1115function IGCM_sys_ncecat {
1116  IGCM_debug_PushStack "IGCM_sys_ncecat" -- $@
1117  if ( $DEBUG_sys ) ; then
1118    echo "IGCM_sys_ncecat :" $@
1119  fi
1120  ncecat $@
1121  if [ $? -gt 0 ] ; then
1122    echo "IGCM_sys_ncecat : erreur ${@}."
1123    IGCM_debug_Exit "ncecat"
1124  fi
1125
1126  IGCM_debug_PopStack "IGCM_sys_ncecat"
1127}
1128
1129function IGCM_sys_ncflint {
1130  IGCM_debug_PushStack "IGCM_sys_ncflint" -- $@
1131  if ( $DEBUG_sys ) ; then
1132    echo "IGCM_sys_ncflint :" $@
1133  fi
1134  ncflint $@
1135  if [ $? -gt 0 ] ; then
1136    echo "IGCM_sys_ncflint : erreur ${@}."
1137    IGCM_debug_Exit "ncflint"
1138  fi
1139
1140  IGCM_debug_PopStack "IGCM_sys_ncflint"
1141}
1142
1143function IGCM_sys_ncks {
1144  IGCM_debug_PushStack "IGCM_sys_ncks" -- $@
1145  if ( $DEBUG_sys ) ; then
1146    echo "IGCM_sys_ncks :" $@
1147  fi
1148  ncks $@
1149  if [ $? -gt 0 ] ; then
1150    echo "IGCM_sys_ncks : erreur ${@}."
1151    IGCM_debug_Exit "ncks"
1152  fi
1153
1154  IGCM_debug_PopStack "IGCM_sys_ncks"
1155}
1156
1157function IGCM_sys_ncpdq {
1158  IGCM_debug_PushStack "IGCM_sys_ncpdq" -- $@
1159  if ( $DEBUG_sys ) ; then
1160    echo "IGCM_sys_ncpdq :" $@
1161  fi
1162  ncpdq $@
1163  if [ $? -gt 0 ] ; then
1164    echo "IGCM_sys_ncpdq : erreur ${@}."
1165    IGCM_debug_Exit "ncpdq"
1166  fi
1167
1168  IGCM_debug_PopStack "IGCM_sys_ncpdq"
1169}
1170
1171function IGCM_sys_ncra {
1172  IGCM_debug_PushStack "IGCM_sys_ncra" -- $@
1173  if ( $DEBUG_sys ) ; then
1174    echo "IGCM_sys_ncra :" $@
1175  fi
1176  ncra $@
1177  if [ $? -gt 0 ] ; then
1178    echo "IGCM_sys_ncra : erreur ${@}."
1179    IGCM_debug_Exit "ncra"
1180  fi
1181
1182  IGCM_debug_PopStack "IGCM_sys_ncra"
1183}
1184
1185function IGCM_sys_ncrcat {
1186  IGCM_debug_PushStack "IGCM_sys_ncrcat" -- $@
1187  if ( $DEBUG_sys ) ; then
1188    echo "IGCM_sys_ncrcat :" $@
1189  fi
1190  ncrcat $@
1191  if [ $? -gt 0 ] ; then
1192    echo "IGCM_sys_ncrcat : erreur ${@}."
1193#       IGCM_debug_Exit "ncrcat"
1194  fi
1195
1196  IGCM_debug_PopStack "IGCM_sys_ncrcat"
1197}
1198
1199function IGCM_sys_ncrename {
1200  IGCM_debug_PushStack "IGCM_sys_ncrename" -- $@
1201  if ( $DEBUG_sys ) ; then
1202    echo "IGCM_sys_ncrename :" $@
1203  fi
1204  ncrename $@
1205  if [ $? -gt 0 ] ; then
1206    echo "IGCM_sys_ncrename : erreur ${@}."
1207    IGCM_debug_Exit "ncrename"
1208  fi
1209
1210  IGCM_debug_PopStack "IGCM_sys_ncrename"
1211}
1212
1213function IGCM_sys_ncwa {
1214  IGCM_debug_PushStack "IGCM_sys_ncwa" -- $@
1215  if ( $DEBUG_sys ) ; then
1216    echo "IGCM_sys_ncwa :" $@
1217  fi
1218  ncwa $@
1219  if [ $? -gt 0 ] ; then
1220    echo "IGCM_sys_ncwa : erreur ${@}."
1221    IGCM_debug_Exit "ncwa"
1222  fi
1223
1224  IGCM_debug_PopStack "IGCM_sys_ncwa"
1225}
1226
1227##############################################################
1228# CDO OPERATOR
1229
1230function IGCM_sys_cdo {
1231  IGCM_debug_PushStack "IGCM_sys_cdo" -- $@
1232
1233  \cdo $@
1234  if [ $? -gt 0 ] ; then
1235    echo "IGCM_sys_cdo : erreur ${@}."
1236    IGCM_debug_PopStack "IGCM_sys_cdo"
1237    return 1
1238  else
1239    IGCM_debug_PopStack "IGCM_sys_cdo"
1240    return 0
1241  fi
1242
1243  IGCM_debug_PopStack "IGCM_sys_cdo"
1244}
1245
1246############################################################
1247# Activate Running Environnment Variables
1248
1249function IGCM_sys_activ_variables {
1250  IGCM_debug_PushStack "IGCM_sys_activ_variables"
1251  if ( $DEBUG_sys ) ; then
1252    echo "IGCM_sys_activ_variables"
1253  fi
1254  IGCM_debug_PopStack "IGCM_sys_activ_variables"
1255}
1256
1257############################################################
1258# Desactivate Running Environnment Variables
1259
1260function IGCM_sys_desactiv_variables {
1261  IGCM_debug_PushStack "IGCM_sys_desactiv_variables"
1262  if ( $DEBUG_sys ) ; then
1263    echo "IGCM_sys_desactiv_variables"
1264  fi
1265  IGCM_debug_PopStack "IGCM_sys_desactiv_variables"
1266}
1267
1268############################################################
1269# Build run file
1270
1271function IGCM_sys_build_run_file {
1272  IGCM_debug_PushStack "IGCM_sys_build_run_file"
1273  if ( $DEBUG_sys ) ; then
1274    echo "IGCM_sys_build_run_file"
1275  fi
1276  IGCM_debug_PopStack "IGCM_sys_build_run_file"
1277}
Note: See TracBrowser for help on using the repository browser.