#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
[Compatibility]
libIGCM=1.0

[UserChoices]
# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
LMDZ_10m_winds=y
# Set Wind_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
10m_winds_method=threshold
# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
# 86400 = daily output
freq_write_chem=86400
# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
feedb=0
#choose sedimentation multilayer or one layer 
multilayer_sedim=y
#coupled model with ORCH
CoupOrchInca=n

# Use XIOS and/or IOIPSL as output library
XIOS=y
IOIPSL=n

[InitialStateFiles]
List= ()
	
[BoundaryFiles]
#List=	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
#	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
#	    (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
#	    (${R_IN}/ATM/${RESOL_ATM}/NUDGE_FILES/ERAI/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
List=()

ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc		,   npp.nc		)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/aircraft.nc	,   aircraft.nc    	)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/sflx.nc		,   sflx.nc		)\
	    (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc	,   landuse.nc		)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt	,   rhvEC.txt		)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt	,   wthEC.txt		)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt	,   clyEC.txt		)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat		,   wth.dat		)\
            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat		,   cly.dat		)\
 	    (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat		,   rhv.dat		)\
	    (${R_IN}/CHM/INCA${RESOL_CHM}/phototable_glo.dat   ,   phototable.dat	)


[ParametersFiles]
List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \
    	(${MODIPSL}/bin/inca.dat, .)

[RestartFiles]
# List restart that have to be saved/restored each loop (file out, saved, and in) :
List= (precipinsoil.dat, precipinsoil.dat, precipinsoil.dat) 


[OutputText]
List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml)

[OutputFiles]
List=	(inca_aero.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc,  Post_1D_inca_aero  ),\
	(inca_common.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_common.nc,    NONE  ),\
	(inca_forcage.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc, Post_1D_inca_forcage  ),\
	(inca_veget.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc,  Post_1D_inca_veget  )


[Post_1D_inca_aero]
Patches= ()
GatherWithInternal = (lon, lat, presnivs, time_counter_bounds, time_counter, area)
TimeSeriesVars2D = (OD550_SSSSM, od550ssas,od550ss,od550dust, loaddustCI, loadssCS, loadSSAS, LOAD_SSSSM, emidustCI, emissAS, emissSS, emissCS)
ChunckJob2D = NONE
TimeSeriesVars3D = ()
ChunckJob3D = NONE


[Post_1D_inca_forcage]
Patches= ()
GatherWithInternal = (lon, lat, presnivs, time_counter_bounds,time_counter, area)
TimeSeriesVars2D = (SWTOAAS_AER,SWTOAAS_DUST,SWTOAAS_SS)
ChunckJob2D = NONE
TimeSeriesVars3D = ()
ChunckJob3D = NONE


[Post_1D_inca_veget]
Patches= ()
GatherWithInternal = (lon, lat, veget, time_counter)
TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
ChunckJob2D = NONE
TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
ChunckJob3D = NONE