Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/AER/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/AER/COMP/inca.card	(revision 6842)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/AER/COMP/inca.card	(revision 6843)
@@ -75,5 +75,5 @@
 	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
 	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
-	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_${ConfChem}.xml, file_def_inca.xml ), \
+	(${SUBMIT_DIR}/PARAM/INCA//file_def_inca_${ConfChem}.xml, file_def_inca.xml ), \
     	(${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat)
 
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/dynamico.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/dynamico.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/dynamico.card	(revision 6843)
@@ -0,0 +1,50 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+RESOL_NBP=40
+RESOL_ATM_Z=79
+etat0=database
+guided_type=nudging
+
+
+# create_etat0_limit=n is used for normal GCM run
+create_etat0_limit = y
+
+# iflag_phys=1 is used for normal GCM run with continents (not aquaplanet) 
+# iflag_phys=101, 102,... or 120 to activate aquaplanet mode
+iflag_phys=1
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=(${R_IN}/ATM/FORCING_LAM/${config_UserChoices_ForcingName}_${config_UserChoices_ForcingDate}.nc, nudging_forcing.nc)
+ListNonDel=() 
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=  	(${SUBMIT_DIR}/PARAM/DYNAMICO/earth_const.def				  , .			),\
+   	(${SUBMIT_DIR}/PARAM/DYNAMICO/LAM/run_dynamico_lam_ERA5_France.def	  , run_dynamico.def	),\
+	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/sponge_dynamico.xml	  , .			),\
+	(${MODIPSL}/modeles/ICOSA_LMDZ/xml/param_gw.xml				  , .			),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/context_dynamico.xml	  , .			),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/context_input_dynamico.xml  , .			),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/field_def_dynamico.xml	  , .			),\
+        (${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/nudging_dynamico.xml	  , .			),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/file_def_dynamico.xml			  , .			)
+
+
+[RestartFiles]
+List=   (NONE)
+
+[OutputText]
+List=   (run_dynamico.def, earth_const.def, iodef.xml, context_dynamico.xml, context_input_dynamico.xml, field_def_dynamico.xml, file_def_dynamico.xml, out_icosa_lmdz.exe.out*, out_icosa_lmdz.exe.err*, xios_client_*)
+
+
+[OutputFiles]
+List=	( start0.nc,       ${R_OUT_ICO_O}/Restart/${config_UserChoices_JobName}_${year}_start.nc,    NONE)
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/inca.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/inca.card	(revision 6843)
@@ -0,0 +1,79 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+#regrid output files on regular grid 
+xios_remap_output=y
+xios_read=y
+# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (10m winds)  parameter value
+wind_parameter=0.78
+#choose seasalt correctif
+seasalt_corr=1.06
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=0
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) 
+emi_interp_time=1
+
+
+
+# Specify output frequency for output files 
+# File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_coupling=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List= ()
+
+ListNonDel=(${R_IN}/CHM/CE0L_ICO/${ConfChem}_mmr_ce0l_ico.nc, tracers_mmr_inca.nc)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/INCA/inca.def					, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml			, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml		, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml		, file_def_inca_restart.xml 	),\
+	(${SUBMIT_DIR}/PARAM/INCA/file_def_inca_${ConfChem}.xml			, file_def_inca.xml 	   	),\
+   	(${SUBMIT_DIR}/PARAM/INCA/CE0L_ICO/tracers_${ConfChem}_dynamico.xml	, .	       	   		),\
+    	(${MODIPSL}/bin/inca_${ConfChem}.dat					, inca.dat			)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (NONE)
+ 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+
+[OutputFiles]
+List=	()
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/lmdz.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/lmdz.card	(revision 6843)
@@ -0,0 +1,88 @@
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use
+LMDZ_Physics=NPv6.2
+
+# Manage radiative aerosol effect and ozone 
+flag_aerosol=0
+ok_ade=n
+ok_aie=n
+aerosol_couple=n
+# read_climoz : interpolation of ozone files. 
+# Use read_climoz=1 for CMIP6 ozone files, 2 for CMIP5 ozone files and 0 for no interpolation
+read_climoz=0
+flag_aerosol_strat=0
+
+ok_cdnc=n
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180.v2/BCS/amipbc_sst_360x180_${year}.nc, amipbc_sst_1x1.nc), \
+        (${R_IN}/ATM/LIMIT/AMIP.v20180427/original/360x180.v2/BCS/amipbc_sic_360x180_${year}.nc, amipbc_sic_1x1.nc), \
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/original/144x96x66/tro3_${year}.nc, climoz.nc)
+
+ListNonDel= (${R_IN}/ATM/INPUT_CE0L/Albedo4_deg.nc, Albedo.nc), \
+        (${R_IN}/ATM/INPUT_CE0L/ECDYN4.nc, ECDYN.nc), \
+        (${R_IN}/ATM/INPUT_CE0L/ECDYN4.nc, ECPHY.nc), \
+        (${R_IN}/ATM/INPUT_CE0L/Relief4.nc, Relief.nc), \
+        (${R_IN}/ATM/INPUT_CE0L/Rugos4_deg.nc, Rugos.nc), \
+        (${R_IN}/ATM/INPUT_CE0L/landiceref4.nc, landiceref.nc), \
+        (${R_IN}/ATM/INPUT_CE0L/OROGRAPHY/orography_nbp${RESOL_NBP}.nc, orography.nc), \
+        (${R_IN}/ATM/START/LAND_WATER_FRACTION/land_water_0.25.nc, land_water.nc), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_input_lmdz.xml, . ),      \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . ),\
+        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
+        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc)
+
+
+# Optional: The o2a.nc file is optional and is used to fit with the coupled configuration for the land-sea mask.
+# The o2a file can be removed if it does not correspond to the resolution or zoom. In that case, Relief.nc will be used to calculate the mask land-sea.
+# Use following o2a file to fit with IPSLCM6.0.11 coupled model:
+#       (${R_IN}/ATM/START/eORCA1.2xLMD144x142/o2a_v3.nc, o2a.nc)
+# Use following o2a file for regular grid 96x95, correspond to coupled configuration IPSLCM5A2:
+#       (${R_IN}/ATM/START/ORCA2.3xLMD96x95/o2a_v3.nc, o2a.nc)
+
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/LMDZ/physiq.def_${LMDZ_Physics}, physiq.def), \
+        (${SUBMIT_DIR}/PARAM/LMDZ/vert.def_L${RESOL_ATM_Z},   vert.def),   \
+	(${SUBMIT_DIR}/PARAM/LMDZ/config.def_actuel     ,  config.def),    \
+	(${SUBMIT_DIR}/PARAM/LMDZ/run.def, .), \
+	(${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def)
+
+[RestartFiles]
+List= (NONE)
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, config.def, tracer.def, guide.def, context_lmdz.xml, context_input_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml)
+
+[OutputFiles]
+List=	( limit.nc,       ${R_OUT_ATM_O}/Boundary/${config_UserChoices_JobName}_${year}_limit.nc,       NONE), \
+	( climoz_LMDZ.nc, ${R_OUT_ATM_O}/Boundary/${config_UserChoices_JobName}_${year}_climoz_LMDZ.nc, NONE), \
+	( startphy.nc,    ${R_OUT_ATM_O}/Restart/${config_UserChoices_JobName}_${year}_startphy.nc,     NONE), \
+	( grid_atm.nc,    ${R_OUT_ATM_O}/Grid/${config_UserChoices_JobName}_${year}_grid_atm.nc,        NONE)
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/xios.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/COMP/xios.card	(revision 6843)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/XIOS/iodef.xml, .)
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/config.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/config.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM/config.card	(revision 6843)
@@ -0,0 +1,125 @@
+# $Id$
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=CREATE-amip-ERA5-AER-LAM
+LongName="create_etat0_limit for interannuel amip run"
+TagName=ICOLMDZORINCA
+SpaceName=DEVT
+ExperimentName=CE0L
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=ICOLMDZORINCA/LAM/CREATE_amip_ERA5_AER_LAM
+ForcingName=ERA5
+ForcingDate=062000
+
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Begin and end of job 
+#D-- "YYYY-MM-DD"
+DateBegin=2000-06-01
+DateEnd=2000-06-05
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=5D
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#============================
+# Source following file with module settings
+EnvFile=${SUBMIT_DIR}/../ARCH/arch.env
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+ConfChem=AER
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ICO= (dynamico, DYNAMICO)
+ATM= (lmdz, LMDZ)
+IOS= (xios, XIOS)
+CHM= (inca, INCA) 
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component: Real name of executable, Name of executable in the run directory 
+ICO= (icosa_lmdz_orch22_${OptMode}.exe, icosa_lmdz.exe, 48MPI)
+ATM= ("","")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+CHM= ("", "") 
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=
+#D- Define restart simulation name
+RestartJobName=
+#D- Path Server Group Login
+RestartPath=
+# Attention login depend de la machine
+
+#========================================================================
+#D-- ICO -
+[ICO]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- CHM -
+[CHM]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- NO Post -
+[Post]
+PackFrequency=NONE
+TimeSeriesFrequency=NONE
+SeasonalFrequency=NONE
+MetricsPCMDI=FALSE
+#========================================================================
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/dynamico.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/dynamico.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/dynamico.card	(revision 6843)
@@ -0,0 +1,52 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+RESOL_NBP=40
+RESOL_ATM_Z=79
+guided_type=nudging
+# create_etat0_limit=n is used for normal GCM run
+create_etat0_limit = n
+
+# iflag_phys=1 is used for normal GCM run with continents (not aquaplanet)
+# iflag_phys is only used in combination with create_etat0_limit=y. See specific CREATE set up to know more.
+iflag_phys=1
+
+
+[InitialStateFiles]
+List=   (${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/CE0L/${config_UserChoices_CreateName}/ICO/Output/Restart/${config_UserChoices_CreateName}_${year}_start.nc, start.nc)
+
+[BoundaryFiles]
+List=(${R_IN}/ATM/FORCING_LAM/${config_UserChoices_ForcingName}_${config_UserChoices_ForcingDate}.nc, nudging_forcing.nc)
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=  	(${SUBMIT_DIR}/PARAM/DYNAMICO/earth_const.def, .),\
+   	(${SUBMIT_DIR}/PARAM/DYNAMICO/LAM/run_dynamico_lam_ERA5_France.def, run_dynamico.def),\
+	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/sponge_dynamico.xml, .),\
+	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/context_dynamico.xml, .),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/context_input_dynamico.xml, .),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/field_def_dynamico.xml, .),\
+	(${MODIPSL}/modeles/DYNAMICO/xml/DYNAMICO_XML/nudging_dynamico.xml, .),\
+   	(${SUBMIT_DIR}/PARAM/DYNAMICO/LAM/file_def_dynamico.xml, .)
+
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc)
+
+[OutputText]
+List=   (run_dynamico.def, earth_const.def, iodef.xml, context_dynamico.xml, context_input_dynamico.xml, field_def_dynamico.xml, file_def_dynamico.xml, out_icosa_lmdz.exe.out*, out_icosa_lmdz.exe.err*, xios_client_*)
+
+
+[OutputFiles]
+List=   (output_dcmip2016_native.nc,    ${R_OUT_ICO_O_H}/${PREFIX}_3H_output_dcmip2016_native.nc,     NONE), \
+        (output_dcmip2016_regular.nc,   ${R_OUT_ICO_O_H}/${PREFIX}_3H_output_dcmip2016_regular.nc,    NONE)
+
+
+#List=	( limit.nc,       ${R_OUT_ICO_O}/Boundary/${config_UserChoices_JobName}_clim_limit.nc,   NONE), \
+#	( start.nc,       ${R_OUT_ICO_O}/Restart/${config_UserChoices_JobName}_clim_start.nc,    NONE), \
+#	( startphy.nc,    ${R_OUT_ICO_O}/Restart/${config_UserChoices_JobName}_clim_startphy.nc, NONE)
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/inca.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/inca.card	(revision 6843)
@@ -0,0 +1,127 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+#regrid output files on regular grid 
+xios_remap_output=y
+xios_read=y
+# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (10m winds)  parameter value
+wind_parameter=0.78
+#choose seasalt correctif
+seasalt_corr=1.06
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=0
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) 
+emi_interp_time=1
+
+
+
+# Specify output frequency for output files 
+# File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_chem=NONE
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=NONE
+output_frequency_aero=NONE
+output_frequency_dep=NONE
+output_frequency_washrate=NONE
+output_frequency_coupling=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_${year}_dyn.nc    ,   sflx_ANT_LR.nc     ),\
+      (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_${year}_dyn.nc    ,   sflx_BBG_LR.nc     )
+
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc   			      ,   landuse.nc	     ),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc	       			      ,   npp.nc	     ),\
+	    (${R_IN}/CHM/INCA144142-L79/oxydants_NMHCAER144_2006.nc		      ,   oxydants.nc	     ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc  	      ,   sflx_GHG_LR.nc     ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc  	      ,   sflx_NAT_LR.nc     ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc 	      ,   sflx_MISC_LR.nc    ),\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc  		 		      ,   dustEC.nc	     ),\
+	    (${R_IN}/CHM/INCA144142-L79/new_phototable.dat   	            	      ,   phototable.dat     )
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/INCA/inca.def						, .				),\
+	(${SUBMIT_DIR}/PARAM/INCA/LAM/context_inca.xml					, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml			, .				),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml			, .				),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml			, .				),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml			, .				),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_${ConfChem}_inca.xml	, context_start_inca.xml	),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml			, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml			, file_def_inca_restart.xml 	),\
+	(${SUBMIT_DIR}/PARAM/INCA/file_def_inca_${ConfChem}.xml				, file_def_inca.xml 		),\
+    	(${MODIPSL}/bin/inca_${ConfChem}.dat						, inca.dat			)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+ 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    NONE  ),\
+	(inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,    Post_1D_inca_species  ),\
+	(inca1d_dep.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc       ,    NONE  ),\
+	(inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    Post_1D_inca_aero  ),\
+	(inca1d_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc    ,    NONE  ),\
+	(inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
+	(inca1d_reacflux.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc   ,    NONE  ),\
+	(inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
+	(inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
+	(inca1mo_emi.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
+	(inca1mo_species.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    NONE  ),\
+	(inca1mo_dep.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc       ,    NONE  ),\
+	(inca1mo_aero.nc       ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    NONE  ),\
+	(inca1mo_forcage.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc    ,    NONE  ),\
+	(inca1mo_invariants.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
+	(inca1mo_reacflux.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc   ,    NONE  ),\
+	(inca1mo_chem.nc       ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
+	(inca1mo_washrate.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
+	(aerosols_from_inca.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/lmdz.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/lmdz.card	(revision 6843)
@@ -0,0 +1,221 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+LMDZ_Physics=NPv6.2
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=0
+ok_ade=n
+ok_aie=n
+aerosol_couple=n
+read_climoz=0
+ok_cdnc=n
+flag_aerosol_strat=0
+
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+# Specify which output file to activate and at which output_level
+# Use an integer to specify the output level or NONE if to deactivate the file
+# output_level_filename=1     : activate the corresponding file with low output level
+# output_level_filename=10    : activate the corresponding file with high output level
+# output_level_filename=NONE  : the file will not be written
+
+output_level_histmth = 5
+output_level_histday = 3
+output_level_histhf  = NONE
+output_level_histmthNMC = NONE
+output_level_histdayNMC = NONE
+output_level_histhfNMC  = NONE
+output_level_histstrataer = NONE
+output_level_histstn      = NONE
+
+# Activate COSP in config.def and set corresponding output files
+LMDZ_COSP_OK=n
+output_level_histmthCOSP = NONE
+output_level_histdayCOSP = NONE
+output_level_histhfCOSP  = NONE
+
+
+[InitialStateFiles]
+# start.nc and startphy.nc are both set in dynamico.card to easier insure coherence of the files
+List=(${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/CE0L/${config_UserChoices_CreateName}/ATM/Output/Restart/${config_UserChoices_CreateName}_${year}_startphy.nc, startphy.nc)
+
+[BoundaryFiles]
+#
+# With CMIP6 aerosols version 1
+# With 3D ozone
+List= (${R_OUT}/${config_UserChoices_TagName}/${config_UserChoices_SpaceName}/CE0L/${config_UserChoices_CreateName}/ATM/Output/Boundary/${config_UserChoices_CreateName}_${year}_limit.nc, limit.nc),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,   aerosols${year}.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
+
+ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc)
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/LMDZ/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/LMDZ/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/LMDZ/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/LMDZ/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/LMDZ/run.def, .),                                   \
+    	(${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def),     \
+        (${SUBMIT_DIR}/PARAM/LMDZ/LAM/context_lmdz.xml, context_lmdz.xml ),     \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_input_lmdz.xml, . ),      \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),          \
+	(${SUBMIT_DIR}/PARAM/LMDZ/file_def_histmth_lmdz.xml, . ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, run.def, tracer.def, guide.def, config.def, vert.def, used_run.def, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    Post_1M_histmthNMC),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = 100Y 
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/orchidee.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/orchidee.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/orchidee.card	(revision 6843)
@@ -0,0 +1,87 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=1Y
+
+# Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def :
+# ROUTING=standard   => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard
+# ROUTING=simple     => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple
+# ROUTING=off        => in orchidee.def RIVER_ROUTING=n
+ROUTING=simple
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1d
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=   (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc ), \
+        (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc ), \
+        (${R_IN}/SRF/reftemp4.nc, reftemp.nc ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v3.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min4.nc, cartepente2d_15min.nc)
+
+[BoundaryFiles]
+List= ()
+ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v2/PFTmap_${year}.nc, PFTmap.nc),\
+            (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical4/woodharvest_${year}.nc,          woodharvest.nc),\
+	    (${R_IN}/SRF/ROUTING/routing_simple.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/ORCHIDEE/orchidee.def_v22, orchidee.def)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_routing_orchidee.xml, .)   ,\
+	(${SUBMIT_DIR}/PARAM/ORCHIDEE/LAM/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc), \
+	(routing_restart.nc, routing_restart.nc, routing_start.nc)
+
+[OutputText]
+List=   (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_routing_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE), \
+        (ORCHIDEE_interp_diag.nc, ${R_OUT_SRF_O_D}/${PREFIX}_ORCHIDEE_interp_diag.nc, NONE), \
+        (forcing_by_ORCHIDEE.nc, ${R_OUT_SRF_O_H}/${PREFIX}_forcing_by_ORCHIDEE.nc, NONE)
+
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/stomate.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/stomate.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/stomate.card	(revision 6843)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/xios.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/COMP/xios.card	(revision 6843)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/XIOS/iodef.xml, .)
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*, xios_server_*, out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/config.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/config.card	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM/config.card	(revision 6843)
@@ -0,0 +1,160 @@
+# $Id$
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=TEST-amip-ERA5-AER-LAM
+LongName=""
+TagName=ICOLMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=ICOLMDZORINCA/LAM/amip_ERA5_AER_LAM
+ExperimentName=amip_LAM
+SpaceName=DEVT
+CreateName=CREATE-amip-ERA5-AER-LAM
+ForcingName=ERA5
+ForcingDate=062000
+
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Begin and end of job 
+#D-- "YYYY-MM-DD"
+#D-- The year for this experiement has no significance as the SST/SIC are mean values over a whole period. 
+#D-- Change the DateEnd if you change CalendarType, set DateEnd=2000-12-31 for leap or noleap.
+DateBegin=2000-06-01
+DateEnd=2000-06-05
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=5D
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#============================
+# Source following file with module settings
+EnvFile=${SUBMIT_DIR}/../ARCH/arch.env
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+ConfChem=AER
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ICO= (dynamico, DYNAMICO)
+ATM= (lmdz, LMDZ)
+SRF= (orchidee, ORCHIDEE)
+SBG= (stomate, ORCHIDEE)
+IOS= (xios, XIOS)
+CHM= (inca, INCA) 
+
+#========================================================================
+#D-- Executable -
+[Executable]
+ICO= (icosa_lmdz_orch22_${OptMode}.exe, icosa_lmdz.exe, 48MPI)
+ATM= ("","")
+SRF= ("", "")
+SBG= ("", "")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+CHM= ("","") 
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=
+#D- Define restart simulation name
+RestartJobName=
+#D- Path Server Group Login
+RestartPath=
+# Attention login depend de la machine
+
+
+#========================================================================
+#D-- NO Post -
+[Post]
+PackFrequency=NONE
+TimeSeriesFrequency=NONE
+SeasonalFrequency=NONE
+MetricsPCMDI=FALSE
+
+
+#========================================================================
+#D-- ICO -
+[ICO]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+
+#========================================================================
+#D-- CHM -
+[CHM]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+# Old component name for restart (if empty, use new name)
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card	(revision 6842)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card	(revision 6843)
@@ -104,5 +104,6 @@
 	(inca1mo_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
 	(inca1mo_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
-	(aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
+	(aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  ),\
+	(mmr_ce0l_ico.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_mmr_ce0l_ico.nc    , NONE	 )
 
 [Post_1D_inca_aero]
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 6842)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 6843)
@@ -100,5 +100,5 @@
 	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
 	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
-	(inca1d_coupling.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_coupling.nc   	,  Post_1D_inca_coupling    ),\
+	(inca1d_coupling.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_coupling.nc   ,  Post_1D_inca_coupling ),\
 	(inca1mo_aero_chem.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero_chem.nc  ,  NONE                  ),\
 	(inca1mo_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
@@ -111,7 +111,8 @@
 	(inca1mo_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
 	(inca1mo_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
-	(inca1mo_coupling.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_coupling.nc   	,  NONE                  ),\
+	(inca1mo_coupling.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_coupling.nc  	,  NONE                  ),\
 	(aerosols_from_inca.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE		 ),\
-	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ),\
+	(mmr_ce0l_ico.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_mmr_ce0l_ico.nc    , NONE			 )
 
 
Index: /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/CE0L_ICO/tracers_AER_dynamico.xml
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/CE0L_ICO/tracers_AER_dynamico.xml	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/CE0L_ICO/tracers_AER_dynamico.xml	(revision 6843)
@@ -0,0 +1,171 @@
+<!-- ============================================================================================================ -->
+<!-- exemple of how to include tracers from other files than start.nc                                             -->
+<!-- more complex scheme may used verticle and horizontal remap if not at same resolution                         -->
+<!-- models wait for "TracerName_init0" as output flow to model, up to the user to create the associated workflow -->
+<!-- ============================================================================================================ -->
+
+<context id="dynamico">
+
+   <file_definition>
+     <file id="tracers" name="tracers_mmr_inca" enabled="true" mode="read" output_freq="1ts">
+        <field id="ps_tracers_read"  operation="once" domain_ref="domain_tracers_read" scalar_ref="scalar" name="ps"/>
+        <field id="pressure_tracers_read" operation="once" name="pmid" domain_ref="domain_tracers_read" axis_ref="axis_tracers_read" prec="8"/>
+        
+        <field_group operation="once" domain_ref="domain_tracers_read" axis_ref="axis_tracers_read" prec="8">
+
+		<field id="Rn222_tracers_read"      name="mmrrn222" />
+		<field id="Pb210_tracers_read"      name="mmrpb210" />
+		<field id="NO2_tracers_read"        name="mmrno2" />
+		<field id="NO3_tracers_read"        name="mmrno3" />
+		<field id="HNO3_tracers_read"       name="mmrhno3" />
+		<field id="N2O5_tracers_read"       name="mmrn2o5" />
+		<field id="SO2_tracers_read"        name="mmrso2" />
+		<field id="H2S_tracers_read"        name="mmrh2s" />
+		<field id="DMS_tracers_read"        name="mmrdms" />
+		<field id="DMSO_tracers_read"       name="mmrdmso" />
+		<field id="NH3_tracers_read"        name="mmrnh3" />
+		<field id="CIDUSTM_tracers_read"    name="mmrcidustm" />
+		<field id="CINO3M_tracers_read"     name="mmrcino3m" />
+		<field id="CIN_tracers_read"        name="mmrcin" />
+		<field id="AIBCM_tracers_read"      name="mmraibcm" />
+		<field id="AIPOMM_tracers_read"     name="mmraipomm" />
+		<field id="AIN_tracers_read"        name="mmrain" />
+		<field id="CSSSM_tracers_read"      name="mmrcsssm" />
+		<field id="CSSO4M_tracers_read"     name="mmrcsso4m" />
+		<field id="CSNH4M_tracers_read"     name="mmrcsnh4m" />
+		<field id="CSMSAM_tracers_read"     name="mmrcsmsam" />
+		<field id="CSNO3M_tracers_read"     name="mmrcsno3m" />
+		<field id="CSN_tracers_read"        name="mmrcsn" />
+		<field id="ASSSM_tracers_read"      name="mmrasssm" />
+		<field id="ASBCM_tracers_read"      name="mmrasbcm" />
+		<field id="ASPOMM_tracers_read"     name="mmraspomm" />
+		<field id="ASSO4M_tracers_read"     name="mmrasso4m" />
+		<field id="ASNH4M_tracers_read"     name="mmrasnh4m" />
+		<field id="ASMSAM_tracers_read"     name="mmrasmsam" />
+		<field id="ASNO3M_tracers_read"     name="mmrasno3m" />
+		<field id="ASN_tracers_read"        name="mmrasn" />
+		<field id="SSSSM_tracers_read"      name="mmrssssm" />
+		<field id="SSN_tracers_read"        name="mmrssn" />
+
+	   
+        </field_group>
+     </file>
+
+   </file_definition>
+   
+
+   <field_definition>
+     <field id="ps_init0_scalar" domain_ref="i" scalar_ref="scalar"> ps_init0 </field>
+     <field id="ps3d_init0" domain_ref="i" axis_ref="axis_from_scalar_dst" scalar_ref="_reset_" field_ref="ps_init0_scalar"/> <!--transform ps from model into 3d field -->
+     <field id="ratio_pressure_dst" field_ref="p_init0">p_init0/ps3d_init0</field> <!-- compute the ratio p/ps -->
+     
+     <field id="ps3d_tracers" axis_ref="axis_from_scalar_src"  scalar_ref="_reset_" field_ref="ps_tracers_read"/> <!--transform ps from model into 3d field -->
+     <field id="ratio_pressure_src" domain_ref="domain_from_tracers_read" field_ref="pressure_tracers_read">pressure_tracers_read/ps3d_tracers</field> <!-- compute the ratio p/ps -->
+
+     <field id="p_tracers_hinterp" field_ref="pressure_tracers_read" domain_ref="domain_from_tracers_read" read_access="true"/>
+
+     <field_group domain_ref="domain_from_tracers_read">
+
+		<field id="Rn222_hinterp"      field_ref="Rn222_tracers_read"      />
+		<field id="Pb210_hinterp"      field_ref="Pb210_tracers_read"      />
+		<field id="NO2_hinterp"        field_ref="NO2_tracers_read"        />
+		<field id="NO3_hinterp"        field_ref="NO3_tracers_read"        />
+		<field id="HNO3_hinterp"       field_ref="HNO3_tracers_read"       />
+		<field id="N2O5_hinterp"       field_ref="N2O5_tracers_read"       />
+		<field id="SO2_hinterp"        field_ref="SO2_tracers_read"        />
+		<field id="H2S_hinterp"        field_ref="H2S_tracers_read"        />
+		<field id="DMS_hinterp"        field_ref="DMS_tracers_read"        />
+		<field id="DMSO_hinterp"       field_ref="DMSO_tracers_read"       />
+		<field id="NH3_hinterp"        field_ref="NH3_tracers_read"        />
+		<field id="CIDUSTM_hinterp"    field_ref="CIDUSTM_tracers_read"    />
+		<field id="CINO3M_hinterp"     field_ref="CINO3M_tracers_read"     />
+		<field id="CIN_hinterp"        field_ref="CIN_tracers_read"        />
+		<field id="AIBCM_hinterp"      field_ref="AIBCM_tracers_read"      />
+		<field id="AIPOMM_hinterp"     field_ref="AIPOMM_tracers_read"     />
+		<field id="AIN_hinterp"        field_ref="AIN_tracers_read"        />
+		<field id="CSSSM_hinterp"      field_ref="CSSSM_tracers_read"      />
+		<field id="CSSO4M_hinterp"     field_ref="CSSO4M_tracers_read"     />
+		<field id="CSNH4M_hinterp"     field_ref="CSNH4M_tracers_read"     />
+		<field id="CSMSAM_hinterp"     field_ref="CSMSAM_tracers_read"     />
+		<field id="CSNO3M_hinterp"     field_ref="CSNO3M_tracers_read"     />
+		<field id="CSN_hinterp"        field_ref="CSN_tracers_read"        />
+		<field id="ASSSM_hinterp"      field_ref="ASSSM_tracers_read"      />
+		<field id="ASBCM_hinterp"      field_ref="ASBCM_tracers_read"      />
+		<field id="ASPOMM_hinterp"     field_ref="ASPOMM_tracers_read"     />
+		<field id="ASSO4M_hinterp"     field_ref="ASSO4M_tracers_read"     />
+		<field id="ASNH4M_hinterp"     field_ref="ASNH4M_tracers_read"     />
+		<field id="ASMSAM_hinterp"     field_ref="ASMSAM_tracers_read"     />
+		<field id="ASNO3M_hinterp"     field_ref="ASNO3M_tracers_read"     />
+		<field id="ASN_hinterp"        field_ref="ASN_tracers_read"        />
+		<field id="SSSSM_hinterp"      field_ref="SSSSM_tracers_read"      />
+		<field id="SSN_hinterp"        field_ref="SSN_tracers_read"        />
+     </field_group>
+     
+     <field_group axis_ref="axis_from_tracers_read" read_access="true">
+
+		<field id="Rn222_init0"      field_ref="Rn222_hinterp"      />
+		<field id="Pb210_init0"      field_ref="Pb210_hinterp"      />
+		<field id="NO2_init0"        field_ref="NO2_hinterp"        />
+		<field id="NO3_init0"        field_ref="NO3_hinterp"        />
+		<field id="HNO3_init0"       field_ref="HNO3_hinterp"       />
+		<field id="N2O5_init0"       field_ref="N2O5_hinterp"       />
+		<field id="SO2_init0"        field_ref="SO2_hinterp"        />
+		<field id="H2S_init0"        field_ref="H2S_hinterp"        />
+		<field id="DMS_init0"        field_ref="DMS_hinterp"        />
+		<field id="DMSO_init0"       field_ref="DMSO_hinterp"       />
+		<field id="NH3_init0"        field_ref="NH3_hinterp"        />
+		<field id="CIDUSTM_init0"    field_ref="CIDUSTM_hinterp"    />
+		<field id="CINO3M_init0"     field_ref="CINO3M_hinterp"     />
+		<field id="CIN_init0"        field_ref="CIN_hinterp"        />
+		<field id="AIBCM_init0"      field_ref="AIBCM_hinterp"      />
+		<field id="AIPOMM_init0"     field_ref="AIPOMM_hinterp"     />
+		<field id="AIN_init0"        field_ref="AIN_hinterp"        />
+		<field id="CSSSM_init0"      field_ref="CSSSM_hinterp"      />
+		<field id="CSSO4M_init0"     field_ref="CSSO4M_hinterp"     />
+		<field id="CSNH4M_init0"     field_ref="CSNH4M_hinterp"     />
+		<field id="CSMSAM_init0"     field_ref="CSMSAM_hinterp"     />
+		<field id="CSNO3M_init0"     field_ref="CSNO3M_hinterp"     />
+		<field id="CSN_init0"        field_ref="CSN_hinterp"        />
+		<field id="ASSSM_init0"      field_ref="ASSSM_hinterp"      />
+		<field id="ASBCM_init0"      field_ref="ASBCM_hinterp"      />
+		<field id="ASPOMM_init0"     field_ref="ASPOMM_hinterp"     />
+		<field id="ASSO4M_init0"     field_ref="ASSO4M_hinterp"     />
+		<field id="ASNH4M_init0"     field_ref="ASNH4M_hinterp"     />
+		<field id="ASMSAM_init0"     field_ref="ASMSAM_hinterp"     />
+		<field id="ASNO3M_init0"     field_ref="ASNO3M_hinterp"     />
+		<field id="ASN_init0"        field_ref="ASN_hinterp"        />
+		<field id="SSSSM_init0"      field_ref="SSSSM_hinterp"      />
+		<field id="SSN_init0"        field_ref="SSN_hinterp"        />
+     </field_group>
+     
+   </field_definition>
+   
+   <axis_definition>
+     <axis id="axis_tracers_read" axis_type="Z"/>
+     
+     <axis id="axis_from_tracers_read" axis_ref="lev" axis_type="Z">
+       <interpolate_axis order="2" coordinate_src="ratio_pressure_src" coordinate_dst="ratio_pressure_dst" extrapolate="true"/>
+     </axis>
+     
+     <axis id="axis_from_scalar_src" axis_ref="axis_tracers_read">
+       <duplicate_scalar/>
+     </axis>
+   
+      <axis id="axis_from_scalar_dst" axis_ref="lev">
+       <duplicate_scalar/>
+     </axis>
+    
+   </axis_definition>
+   
+   <domain_definition>
+     
+     <domain id="domain_tracers_read" type="rectilinear">
+       <generate_rectilinear_domain/>
+     </domain>
+     
+     <domain id="domain_from_tracers_read" domain_ref="i">
+       <interpolate_domain order="1" />
+     </domain>
+   </domain_definition>
+
+</context>
Index: /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/LAM/context_inca.xml
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/LAM/context_inca.xml	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/LAM/context_inca.xml	(revision 6843)
@@ -0,0 +1,154 @@
+<!-- =========================================================================================================== -->
+<!-- ORCHIDEE context                                                                                            -->
+<!-- context_orchidee.xml : Configuration file for ORCHIDEE for production of output files using XIOS            -->
+<!-- =========================================================================================================== -->
+<context id="inca">
+  
+  
+  <!-- =========================================================================================================== -->
+  <!-- Definition of all existing variables                                                                        -->
+  <!-- DO NOT CHANGE THIS FILE                                                                                     -->
+  <!-- =========================================================================================================== -->
+  <field_definition src="./field_def_inca.xml"/>
+  <!-- =========================================================================================================== -->
+  <!-- Definition of output files                                                                                  -->
+  <!-- Definition of variables or groups included in the different files                                           -->
+  <!-- CHANGE THIS FILE BY ADDING THE FILES AND/OR VARIABLES YOU WANT TO PRODUCE                                   -->
+  <!-- Only variables and groups existing in field_def_orchidee.xml can be used                                    -->
+  <!-- =========================================================================================================== -->
+  <file_definition src="./file_def_inca.xml"/>
+  <file_definition src="./file_def_inca_restart.xml"/>
+  
+  
+  <!-- =========================================================================================================== -->
+  <!-- Definition of horizontal domain                                                                             -->
+  <!-- =========================================================================================================== -->
+  <domain_definition>
+    <domain id="dom_chem"/>
+
+
+    <!-- Standard output horizontal domain:                                                                         -->
+    <!-- The same as the model grid is used by default for regular longitude-latitude grid. If the model is running -->
+    <!-- on an unstructred grid, this dom_cheÃ¹ will be changed to dom_chem_regular, see below.     -->   
+    <domain id="dom_chem_out" domain_ref="dom_chem" />
+
+
+    <!-- Interpolated output horizontal domain:                                                                   -->
+    <!-- This domain is used for output when the modele is running on an unstructured grid. For that case,        -->
+    <!-- the INCA fortran code will switch so that dom_chem_out make reference to this domain.       -->
+<!-- attention dim en dur -->
+
+<!-- 
+<domain id="dom_chem_regular" ni_glo="144" nj_glo="143" type="rectilinear"  >
+      <generate_rectilinear_domain lat_start="-90" lat_end="90" lon_start="0"/>
+      <interpolate_domain order="1" renormalize="true" detect_missing_value="true"/>
+    </domain>
+-->
+
+    <domain id="dom_chem_regular" ni_glo="300" nj_glo="232" type="rectilinear"  >
+     <generate_rectilinear_domain lat_start="38" lat_end="55" lon_start="-9" lon_end="13"/>
+     <interpolate_domain order="1" renormalize="true" detect_missing_value="true"/>
+    </domain>
+
+    <!-- Output horizontal domain used for CMIP6 simulations:                                                    -->
+    <!-- This domain is only used when running with the workflow CMIP6 and dr2xml_inca.xml files.            -->
+    <domain id="greordered"  domain_ref="dom_glo">
+      <reorder_domain invert_lat="true" shift_lon_fraction="0.5" min_lon="0" max_lon="360" />
+    </domain> 
+
+
+  </domain_definition>
+  
+  <!-- =========================================================================================================== -->
+  <!-- Definition of vertical axis and extra dimensions                                                            -->
+  <!-- =========================================================================================================== -->
+  
+  <!-- Define groups of vertical axes -->
+  <axis_definition>
+
+    <axis id="presnivs" standard_name="Vertical levels" unit="Pa" />
+    <axis id="paprsniv" prec="8" long_name = "number of layer interfaces" standard_name ="number of layer interfaces" unit="1"/>
+    <axis id="veget" />
+    <axis id="surf" />
+    <axis id="klev"  prec="8" long_name = "number of layers" standard_name ="number of layers" unit="1" />
+    <axis id="bnds" standard_name="bounds" unit="1" />
+
+    <axis id="axis_lat" standard_name="Latitude axis">
+        <reduce_domain operation="average" direction="iDir" />
+    </axis>
+
+
+  </axis_definition>
+
+  <grid_definition>
+
+<!-- specifics grids without lon/lat -->
+
+    <grid id="klev_bnds"> 
+       <axis axis_ref="klev" /> 
+       <axis axis_ref="bnds" /> 
+    </grid>
+
+    <grid id="klevp1_bnds"> 
+       <axis axis_ref="paprsniv" /> 
+       <axis axis_ref="bnds" /> 
+    </grid>
+
+    <grid id="grid_vertical">
+      <axis axis_ref="presnivs" /> 
+    </grid>
+
+<!-- grid 2D -->
+     <grid id="grid_chem">
+        <domain domain_ref="dom_chem" />
+     </grid>
+
+     <grid id="grid_chem_out">
+        <domain domain_ref="dom_chem_out" />
+     </grid>
+
+<!-- grids 3D -->
+
+     <grid id="grid_presnivs">
+        <domain domain_ref="dom_chem" />
+        <axis axis_ref="presnivs" />
+     </grid>
+
+     <grid id="grid_presnivs_out">
+        <domain domain_ref="dom_chem_out" />
+        <axis axis_ref="presnivs" />
+     </grid>
+
+     <grid id="grid_surf">
+        <domain domain_ref="dom_chem" />
+        <axis axis_ref="surf" />
+     </grid>
+
+     <grid id="grid_surf_out">
+        <domain domain_ref="dom_chem_out" />
+        <axis axis_ref="surf" />
+     </grid>
+
+     <grid id="grid_veget">
+        <domain domain_ref="dom_chem" />
+        <axis axis_ref="veget" />
+     </grid>
+
+     <grid id="grid_veget_out">
+        <domain domain_ref="dom_chem_out" />
+        <axis axis_ref="veget" />
+     </grid>
+
+     <grid id="grid_paprsniv">
+        <domain domain_ref="dom_chem" />
+        <axis axis_ref="paprsniv" />
+     </grid>
+
+     <grid id="grid_paprsniv_out">
+        <domain domain_ref="dom_chem_out" />
+        <axis axis_ref="paprsniv" />
+     </grid>
+
+  </grid_definition>
+
+</context>
Index: /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/file_def_inca_AER.xml
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/file_def_inca_AER.xml	(revision 6843)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/GENERAL/PARAM/INCA/file_def_inca_AER.xml	(revision 6843)
@@ -0,0 +1,338 @@
+<file_definition>
+
+ <!-- fichier mensuel sorti systematiquement --> 
+ <file id="aerosols" name="aerosols_from_inca" output_freq="1mo" enabled=".TRUE." >
+
+   <field field_ref="Ahyb"         name="ap"            />
+   <field field_ref="Bhyb"         name="b"             />
+   
+   <field_group group_ref="remap_1mo" grid_ref="grid_chem_out">
+     <field field_ref="AIRMASS"      grid_ref="grid_presnivs_out"/>
+     <field field_ref="pmid"         grid_ref="grid_presnivs_out"/>
+     <field field_ref="ps"           />
+     <field field_ref="AIPOMM"       name="AIPOMM"       grid_ref="grid_presnivs_out"  />
+     <field field_ref="ASBCM"        name="ASBCM"        grid_ref="grid_presnivs_out"  />
+     <field field_ref="AIBCM"        name="AIBCM"        grid_ref="grid_presnivs_out"  />
+     <field field_ref="ASPOMM"       name="ASPOMM"       grid_ref="grid_presnivs_out"  />
+     <field field_ref="CSSSM"        name="CSSSM"        grid_ref="grid_presnivs_out"  />
+     <field field_ref="ASSSM"        name="ASSSM"        grid_ref="grid_presnivs_out"  />
+     <field field_ref="CIDUSTM"      name="CIDUSTM"      grid_ref="grid_presnivs_out"  />
+     <field field_ref="ASSO4M"       name="SO4"          grid_ref="grid_presnivs_out"  />
+     <field field_ref="CSSO4M"       name="CSSO4M"       grid_ref="grid_presnivs_out"  />
+     <field field_ref="SSSSM"        name="SSSSM"        grid_ref="grid_presnivs_out"  />
+     <field field_ref="ASNO3M"       name="ASNO3M"       grid_ref="grid_presnivs_out"  />
+     <field field_ref="CSNO3M"       name="CSNO3M"       grid_ref="grid_presnivs_out"  />
+     <field field_ref="CINO3M"       name="CINO3M"       grid_ref="grid_presnivs_out"  />
+     <field field_ref="LOAD_AIPOMM"  name="load_AIPOMM"   />
+     <field field_ref="LOAD_ASBCM"   name="load_ASBCM"    />
+     <field field_ref="LOAD_AIBCM"   name="load_AIBCM"    />
+     <field field_ref="LOAD_ASPOMM"  name="load_ASPOMM"   />
+     <field field_ref="LOAD_CSSSM"   name="load_CSSSM"    />
+     <field field_ref="LOAD_ASSSM"   name="load_ASSSM"    />
+     <field field_ref="LOAD_CIDUSTM" name="load_CIDUSTM"  />
+     <field field_ref="LOAD_ASSO4M"  name="load_SO4"      />
+     <field field_ref="LOAD_CSSO4M"  name="load_CSSO4M"   />
+     <field field_ref="LOAD_SSSSM"   name="load_SSSSM"    />
+     <field field_ref="LOAD_ASNO3M"  name="load_ASNO3M"   />
+     <field field_ref="LOAD_CSNO3M"  name="load_CSNO3M"   />
+     <field field_ref="LOAD_CINO3M"  name="load_CINO3M"   />
+   </field_group>
+ </file>
+
+ 
+ <file id="sulfur" name="sulfur" output_freq="1d" enabled=".TRUE." >
+   <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+     <field field_ref="Emi_DMS"          name="emidms"      />
+     <field field_ref="LOAD_DMS"         name="loaddms"     />
+     <field field_ref="LOAD_SO2"         name="loadso2"     />
+     <field field_ref="LOAD_ASSO4M"      name="loadso4as"   />
+     <field field_ref="DMS"              name="vmrdms"     grid_ref="grid_presnivs_out"  />
+     <field field_ref="SO2"              name="vmrso2"     grid_ref="grid_presnivs_out"  />
+     <field field_ref="ASSO4M"           name="mmrso4as"   grid_ref="grid_presnivs_out"  />
+   </field_group>
+ </file>
+ 
+ <!-- fichiers pour lesquels l'utilisateur peut definir la resolution depuis inca.card --> 
+
+ <file id="forcage" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+   <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+     
+     <field field_ref="taucld"   grid_ref="grid_presnivs_out" />
+     <field field_ref="taucldpi" grid_ref="grid_presnivs_out" />
+     <field field_ref="cldemi"   grid_ref="grid_presnivs_out" />
+     <field field_ref="CCM1"     grid_ref="grid_presnivs_out" />
+     <field field_ref="CCM2"     grid_ref="grid_presnivs_out" />
+     <field field_ref="tautot_550"/>
+     <field field_ref="tauant_550"/>
+     <field field_ref="taunat_550"/>
+     <field field_ref="SOLUBLE_LOAD"/>
+     <field field_ref="SOLUBLE_LOAD_PI"/>
+     <field field_ref="SOLUBLE_LOAD_ANTR"/>
+     
+     <field_group group_ref="fswtoaas_aero" />
+     <field_group group_ref="fswtoacs_aero" />
+     <field_group group_ref="fswsrfas_aero" />
+     <field_group group_ref="fswsrfcs_aero" />
+     
+     <field field_ref="FSWTOAAS_AI"    	/>
+     <field field_ref="FSWSRFAS_AI"    	/>
+     
+     <field_group group_ref="swtoaas_aero" />
+     <field_group group_ref="swtoacs_aero" />
+     <field_group group_ref="swsrfas_aero" />
+     <field_group group_ref="swsrfcs_aero" />
+     
+     <field field_ref="SWTOAAS_AI"    	/>
+     <field field_ref="SWSRFAS_AI"	/>
+
+     <field field_ref="cforcTOA_0"	/>
+     <field field_ref="cforcSRF_0"	/>
+     <field field_ref="DcforcTOA_NAT"  	/>
+     <field field_ref="DcforcSRF_NAT"  	/>
+     <field field_ref="DcforcTOA_ANTR" 	/>
+     <field field_ref="DcforcSRF_ANTR" 	/>
+     <field field_ref="CLOUDfract"     	/>
+     <field field_ref="cRFtoa_nat"	/>
+     <field field_ref="cRFsrf_nat"    	/>
+     <field field_ref="cRFtoa_antr"    	/>
+     <field field_ref="cRFsrf_antr"    	/>
+     <field field_ref="SWTOAAS_AD"	/>
+     <field field_ref="SWTOACS_AD"	/>
+     <field field_ref="SWSRFAS_AD"	/>
+     <field field_ref="SWSRFCS_AD"	/>
+     <field field_ref="tops"	    	/>
+     <field field_ref="tops0"	    	/>
+     <field field_ref="topl"	    	/>
+     <field field_ref="topl0"          	/>
+
+
+   </field_group>
+ </file>
+
+
+ <file id="aero" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+   <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+    <field_group group_ref="Opt_thick"   />
+    <field_group group_ref="Opt_thick3D"    grid_ref="grid_presnivs_out" />
+
+    <field_group group_ref="load_aero"      />
+    <field_group group_ref="mdw_aero"       grid_ref="grid_presnivs_out" />
+    <field_group group_ref="aerh2o_aero"    grid_ref="grid_presnivs_out" />
+    <field_group group_ref="oduvvis_aero"   grid_ref="grid_presnivs_out"/>
+    <field_group group_ref="odvisir_aero"   grid_ref="grid_presnivs_out"/>
+    <field_group group_ref="ssauvvis_aero"  grid_ref="grid_presnivs_out"/>
+    <field_group group_ref="ssavisir_aero"  grid_ref="grid_presnivs_out"/>
+    <field_group group_ref="asyuvvis_aero"  grid_ref="grid_presnivs_out"/>
+    <field_group group_ref="asyvisir_aero"  grid_ref="grid_presnivs_out"/>
+
+
+    <field field_ref="LOAD_DMS"  	/>
+    <field field_ref="LOAD_DMSO"  	/>
+    <field field_ref="LOAD_SO2"  	/>
+
+
+    <field field_ref="SO2_p_dmsoh"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="SO2_p_dmsno3"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="SO2_p_h2soh"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="SO2_p_dmsooh"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="DMSO_p_dmsoh"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="ASMSAM_p_dmsooh"  grid_ref="grid_presnivs_out"/>
+    <field field_ref="ASSO4M_p_so2oh"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="ASSO4M_p_so2h2o2" grid_ref="grid_presnivs_out"/>
+    <field field_ref="ASSO4M_p_so2o3"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="CINO3_p_a"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="CSNO3_p_a1"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="ASNO3M_p_nh3hno3" grid_ref="grid_presnivs_out"/>
+    <field field_ref="ASNH4M_p_nh3hno3" grid_ref="grid_presnivs_out"/>
+    <field field_ref="HNO3_p_nh3hno3"  	grid_ref="grid_presnivs_out"/>
+    <field field_ref="NH3_p_nh3hno3"  	grid_ref="grid_presnivs_out"/>
+   </field_group>
+
+ </file>
+
+
+ <file id="chemistry" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+
+   <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+
+
+     <field field_ref="NH3_l_g"  grid_ref="grid_presnivs_out"/>
+     <field field_ref="NH3_l_a"  grid_ref="grid_presnivs_out"/>
+     <field field_ref="HONO_p_g" grid_ref="grid_presnivs_out"/>
+     <field field_ref="HONO_p_a" grid_ref="grid_presnivs_out"/>
+     <field field_ref="HONO_l_g" grid_ref="grid_presnivs_out"/>
+     <field field_ref="HONO_l_a" grid_ref="grid_presnivs_out"/>
+     <field field_ref="nh3_col" />
+     <field field_ref="ASMSAM_p_dmsooh"  grid_ref="grid_presnivs_out"/>
+     <field field_ref="ASSO4M_p_so2oh"   grid_ref="grid_presnivs_out"/>
+     <field field_ref="ASSO4M_p_so2h2o2" grid_ref="grid_presnivs_out"/>
+     <field field_ref="ASSO4M_p_so2o3"   grid_ref="grid_presnivs_out"/>
+
+    </field_group>
+  </file>
+
+
+  <file id="emissions" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+    
+    <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+
+
+     <field_group group_ref="emi_species" />
+     <field_group group_ref="emialt_aero" grid_ref="grid_presnivs_out" />
+    </field_group>
+
+  </file>
+
+
+  <file id="species" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+    <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+    <field_group group_ref="conc_species" grid_ref="grid_presnivs_out" />
+
+    </field_group>
+  </file>
+
+
+  <file id="dvel"  name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+    <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+
+    <field field_ref="Dry_NH3" />
+    <field field_ref="Dry_HNO3" />
+    <field field_ref="Dry_HONO" />
+    <field field_ref="Dry_NOY" />
+
+    <field_group group_ref="sed_aero"       />
+    <field_group group_ref="wet_aero"       />
+    <field_group group_ref="dryvd_species"  />
+    <field_group group_ref="drydep_species" />
+
+
+    <field field_ref="Wet3D_H2O2"  grid_ref="grid_presnivs_out" />
+    <field field_ref="Wet3D_HNO3"  grid_ref="grid_presnivs_out" />
+    <field field_ref="Wet3D_HONO"  grid_ref="grid_presnivs_out" />
+    <field field_ref="Wet3D_NOY"   grid_ref="grid_presnivs_out" />
+    <field field_ref="Wet3D_NH3"   grid_ref="grid_presnivs_out" />
+    <field field_ref="Wet3D_SO2"   grid_ref="grid_presnivs_out" />
+    <field field_ref="Wet3D_DMS"   grid_ref="grid_presnivs_out" />
+
+    <field field_ref="WET_SO2"  	/>
+    <field field_ref="WET_DMS"  	/>
+    <field field_ref="WET_DMSO"  	/>
+
+    </field_group>
+
+  </file>
+
+
+  <file id="washout" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_">
+
+    <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+     <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+    <field_group group_ref="henry_const" grid_ref="grid_presnivs_out" />
+
+    </field_group>
+
+  </file>
+
+  <file id="reacflux" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_" >
+    <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+      <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+    <field_group group_ref="reac_flux" grid_ref="grid_presnivs_out" />
+    </field_group>
+  </file>
+
+  <file id="invariants" name="_AUTO_" output_freq="_AUTO_" enabled="_AUTO_" >
+    <field_group group_ref="remap_1d" grid_ref="grid_chem_out">
+
+
+      <field field_ref="ps"   	/>
+     <field field_ref="area"   />
+     <field field_ref="pmid"    grid_ref="grid_presnivs_out" />
+     <field field_ref="sh"      grid_ref="grid_presnivs_out" />
+     <field field_ref="pdel"    grid_ref="grid_presnivs_out" />
+     <field field_ref="zdens"   grid_ref="grid_presnivs_out" />
+     <field field_ref="AIRMASS" grid_ref="grid_presnivs_out" />
+     <field field_ref="temp"    grid_ref="grid_presnivs_out" />
+
+    <field_group group_ref="inv_oxy" grid_ref="grid_presnivs_out" />
+    </field_group>
+  </file>
+
+</file_definition>
