Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card	(revision 6585)
@@ -0,0 +1,126 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=y
+# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (10m winds)  parameter value
+wind_parameter=0.78
+#choose seasalt correctif
+seasalt_corr=1.06
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) 
+emi_interp_time=1
+
+# Specify output frequency for output files 
+# File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc,   sflx_ANT_LR.nc ),\
+      (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc,   sflx_BBG_LR.nc ),\
+      (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc      ,   aircraft_mth.nc)
+
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc   		,   landuse.nc		),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc	       		,   npp.nc		),\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/oxydants_NMHCAER144_2006.nc	,   oxydants.nc		),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc  ,   sflx_GHG_LR.nc     ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc  ,   sflx_NAT_LR.nc     ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc ,   sflx_MISC_LR.nc    ),\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc  		 		   ,   dustEC.nc	  ),\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	            	   ,   phototable.dat	  )
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_AER_inca.xml, context_start_inca.xml)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER.xml, file_def_inca.xml ), \
+    	(${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+ 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    NONE  ),\
+	(inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,    Post_1D_inca_species  ),\
+	(inca1d_dep.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc       ,    NONE  ),\
+	(inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    Post_1D_inca_aero  ),\
+	(inca1d_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc    ,    NONE  ),\
+	(inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
+	(inca1d_reacflux.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc   ,    NONE  ),\
+	(inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
+	(inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
+	(inca1mo_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
+	(inca1mo_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    NONE  ),\
+	(inca1mo_dep.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc       ,    NONE  ),\
+	(inca1mo_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    NONE  ),\
+	(inca1mo_forcage.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc    ,    NONE  ),\
+	(inca1mo_invariants.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
+	(inca1mo_reacflux.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc   ,    NONE  ),\
+	(inca1mo_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
+	(inca1mo_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
+	(aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/lmdz.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/lmdz.card	(revision 6585)
@@ -0,0 +1,131 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+LMDZ_Physics=NPv6.2
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
+# desactivate aerosol_strato in lmdz
+flag_aerosol_strat=0
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+pmagic=0.0
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=y
+read_climoz=1
+ok_cdnc=y
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+# Specify which output file to activate and at which output_level
+# Use an integer to specify the output level or NONE if to deactivate the file
+# output_level_filename=1     : activate the corresponding file with low output level
+# output_level_filename=10    : activate the corresponding file with high output level
+# output_level_filename=NONE  : the file will not be written
+output_level_histmth = 5
+output_level_histday = NONE
+output_level_histhf  = NONE
+output_level_histmthNMC = NONE
+output_level_histdayNMC = NONE
+output_level_histhfNMC  = NONE
+output_level_histstrataer = NONE
+output_level_histdaystrataer = NONE
+output_level_histstn      = NONE
+
+# Activate COSP in config.def and set corresponding output files
+LMDZ_COSP_OK=n
+output_level_histmthCOSP = NONE
+output_level_histdayCOSP = NONE
+output_level_histhfCOSP  = NONE
+
+[InitialStateFiles]
+List= 	(${R_IN}/CHM/INCA${RESOL_CHM}/start_NAS_H2O.nc	, start.nc	) \
+	(${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=       (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
+	    (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
+
+ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt)
+
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+    	(${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def),     	    \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, tracer.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/orchidee.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/orchidee.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/orchidee.card	(revision 6585)
@@ -0,0 +1,88 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=1Y
+
+
+# Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def : 
+# ROUTING=standard   => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard
+# ROUTING=simple     => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple
+# ROUTING=off        => in orchidee.def RIVER_ROUTING=n 
+ROUTING=standard
+
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc), \
+        (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/ROUTING/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc)
+ListNonDel= ()
+
+# to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi
+#ListNonDel= (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \
+#            (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_v22, orchidee.def)   ,\
+	(${SUBMIT_DIR}/PARAM/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/stomate.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/stomate.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/stomate.card	(revision 6585)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/xios.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/COMP/xios.card	(revision 6585)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/config.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/config.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/AER/config.card	(revision 6585)
@@ -0,0 +1,155 @@
+# $Id$
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=AERreg
+#----- Short Name of Experiment
+ExperimentName=AER
+#----- DEVT TEST PROD
+SpaceName=PROD
+LongName="LMDZORINCA_v6 config"
+TagName=LMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA/AER
+#============================
+#-- leap, noleap, 360d
+CalendarType=leap
+#-- Experiment dates : Beginning and ending
+#-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-12-31
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#============================
+PeriodLength=1Y
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+#============================
+#-- ResolAtm indicates the atmospheric resolution
+#   This variable is used in the executable name 
+ResolAtm=144x142x79
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+#============================
+ConfChem=AER
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- by default: config.card describes no restart for all components 
+#D-             ie start from Levitus or limit files
+#D- If you want to restart all components from the same simulation,
+#D-      put OveRule flag to 'y' and set the next 3 parameters
+OverRule=n
+#D- Last day of the experience used as restart for all components
+RestartDate=2000-01-31
+#D- Define restart simulation name for all components
+RestartJobName=EXP00
+#D- Path Server Group Login
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=LMDZOR01
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=1859-12-31
+#D- Define restart simulation name for all components
+RestartJobName=O1T09V06
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p86mart/IGCM_OUT/IPSLCM6/DEVT/piControl
+
+
+#========================================================================
+#D-- CHM -
+[CHM]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ)
+SRF= (orchidee, ORCHIDEE)
+SBG= (stomate, ORCHIDEE)
+CHM= (inca, INCA) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm_${ResolAtm}_orch22_${OptMode}_${ConfChem}.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("" ,"" )
+SBG= ("" ,"" )
+CHM= ("", "")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- PackFrequency determines the frequency of pack submission
+PackFrequency=1Y
+#D- TimeSeriesFreqency determines the frequency of post-processing submission
+#D- Set NONE to deactivate the creation of all time series 
+TimeSeriesFrequency=1Y
+#D- SeasonalFrequency determines the length for each seasonal average
+#D- Set NONE to deactivate the creation of all seasonal avereage
+SeasonalFrequency=1Y
+#D- If you want to produce compute PCMDI metrics from seasonal average
+#D- Set FALSE to deactivate the metrics computation.
+MetricsPCMDI=FALSE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulations years
+SeasonalFrequencyOffset=0
+
+#========================================================================
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card	(revision 6585)
@@ -0,0 +1,89 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=y
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) 
+emi_interp_time=1
+
+# Specify output frequency for output files 
+# you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_ges=1d
+
+
+[InitialStateFiles]
+List= ()
+
+	
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_dyn.nc,   sflx_ANT_LR.nc         ),\
+     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_dyn.nc,   sflx_BBG_LR.nc         ),\
+     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     ),\
+     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}_yearly_interpolated/oxydants_${year}.nc,   oxydants.nc         )
+
+
+ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_GHG_dyn.nc  ,   sflx_GHG_LR.nc     )\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_MISC_dyn.nc ,   sflx_MISC_LR.nc    )\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_NAT_dyn.nc  ,   sflx_NAT_LR.nc     )\
+	    (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc   			,   landuse.nc	       ),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc	       			,   npp.nc	       ),\
+	    (${R_IN}/CHM/FILES_LONxLAT/co2_carbonator_1deg.nc			,   co2_carbonator.nc  ),\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat            	,   phototable.dat     )
+
+
+
+[ParametersFiles]
+List= (${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml		, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml	, .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml	, .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_GES_inca.xml, context_start_inca.xml	),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_co2_inca.xml  	, .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml  	, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml	, .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml	, file_def_inca_restart.xml 	),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml	, file_def_inca.xml 		),\
+    	(${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat)
+
+	
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_ges.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_ges.nc, Post_1D_inca_ges  ),\
+	(inca1mo_ges.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_ges.nc, NONE  ),\
+	(mmr_ce0l_ico.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_mmr_ce0l_ico.nc    , NONE)
+
+
+
+
+[Post_1D_inca_ges]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, , time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrch4,vmrco,vmrco2oc,vmrco2bim,vmrco2bih,jn2o,jmcf)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/lmdz.card	(revision 6585)
@@ -0,0 +1,132 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+LMDZ_Physics=NPv6.2
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
+# desactivate aerosol_strato in lmdz
+flag_aerosol_strat=0
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=0
+ok_ade=n
+ok_aie=n
+aerosol_couple=n
+chemistry_couple=n
+read_climoz=0
+ok_cdnc=n
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+# Specify which output file to activate and at which output_level
+# Use an integer to specify the output level or NONE if to deactivate the file
+# output_level_filename=1     : activate the corresponding file with low output level
+# output_level_filename=10    : activate the corresponding file with high output level
+# output_level_filename=NONE  : the file will not be written
+output_level_histmth = 5
+output_level_histday = NONE
+output_level_histhf  = NONE
+output_level_histmthNMC = NONE
+output_level_histdayNMC = NONE
+output_level_histhfNMC  = NONE
+output_level_histstrataer = NONE
+output_level_histdaystrataer = NONE
+output_level_histstn      = NONE
+
+# Activate COSP in config.def and set corresponding output files
+LMDZ_COSP_OK=n
+output_level_histmthCOSP = NONE
+output_level_histdayCOSP = NONE
+output_level_histhfCOSP  = NONE
+
+
+[InitialStateFiles]
+List= 	(${R_IN}/CHM/INCA${RESOL_CHM}/start_NAS_H2O.nc	, start.nc	) \
+	(${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=       (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
+	    (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
+
+ 
+ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt)
+
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+    	(${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def),     	    \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, tracer.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/orchidee.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/orchidee.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/orchidee.card	(revision 6585)
@@ -0,0 +1,88 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=1Y
+
+
+# Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def : 
+# ROUTING=standard   => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard
+# ROUTING=simple     => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple
+# ROUTING=off        => in orchidee.def RIVER_ROUTING=n 
+ROUTING=standard
+
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc), \
+        (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/ROUTING/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc)
+ListNonDel= ()
+
+# to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi
+#ListNonDel= (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \
+#            (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_v22, orchidee.def)   ,\
+	(${SUBMIT_DIR}/PARAM/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/stomate.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/stomate.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/stomate.card	(revision 6585)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/xios.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/COMP/xios.card	(revision 6585)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/config.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/config.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/GES/config.card	(revision 6585)
@@ -0,0 +1,154 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=GESreg
+SpaceName=PROD
+ExperimentName=GES
+LongName='GES en 144x142x79 et nouvelle physique'
+TagName=LMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA/GES
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-12-31
+#============================
+#D-- 1Y, 1M, 5D, D
+PeriodLength=1Y
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+#============================
+#-- ResolAtm indicates the atmospheric resolution
+#   This variable is used in the executable name 
+ResolAtm=144x142x79
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+#============================
+ConfChem=GES
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ6)
+SRF= (orchidee, orchidee_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+CHM= (inca, INCA6) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm_${ResolAtm}_orch22_${OptMode}_${ConfChem}.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("", "")
+SBG= ("", "")
+CHM= ("", "")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=1Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- CHM -
+[CHM]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 6585)
@@ -0,0 +1,163 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=y
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (10m winds) parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=2
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
+emi_interp_time=1
+
+
+# Specify output frequency for output files 
+# Files inca_oxydants and aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage them from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_aero_chem=1d
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+[InitialStateFiles]
+List= ()
+
+	
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+
+    
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc				,   landuse.nc	),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            		,   npp.nc	),\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc         		,   o3lin.nc	),\
+	    (${R_IN}/CHM/FILES_LONxLAT/sad_dyn.nc					,   sad.nc	),\
+            (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat                         		,   lglived.dat	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc	,   sflx_ANT_LR.nc ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc	,   sflx_BBG_LR.nc ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc 	    	,   sflx_GHG_LR.nc ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc     	,   sflx_NAT_LR.nc ),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc 		,   sflx_MISC_LR.nc),\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_sc0_lmdz_phy.nc      		,   aircraft_hs.nc ),\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc			 		,   dustEC.nc	   ),\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   		    		,   phototable.dat )
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def					, .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml		, .			),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sad_inca.xml	, .),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_NAS_inca.xml, context_start_inca.xml)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml        , .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER.xml, file_def_inca.xml	),\
+    	(${MODIPSL}/bin/inca_${ConfChem}.dat					, inca.dat		)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1ts_aero_chem.nc   ,      ${R_OUT_CHM_O_H}/${PREFIX}_1H_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_aero_chem.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_emi.nc     	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     	,  NONE                  ),\
+	(inca1d_species.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc 	,  Post_1D_inca_species  ),\
+	(inca1d_dep.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc    	,  NONE                  ),\
+	(inca1d_chem.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    	,  Post_1D_inca_chem     ),\
+	(inca1d_aero.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    	,  Post_1D_inca_aero     ),\
+	(inca1d_phtrate.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1d_reacflux.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc	,  NONE                  ),\
+	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
+	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   	,  Post_1D_inca_veget    ),\
+	(inca1mo_aero_chem.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1mo_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
+	(inca1mo_species.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc 	,  NONE                  ),\
+	(inca1mo_dep.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc    	,  NONE                  ),\
+	(inca1mo_chem.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    	,  NONE                  ),\
+	(inca1mo_aero.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    	,  NONE                  ),\
+	(inca1mo_phtrate.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1mo_reacflux.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc	,  NONE                  ),\
+	(inca1mo_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
+	(inca1mo_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
+	(inca1mo_veget.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   	,  NONE                  ),\
+	(aerosols_from_inca.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE		 ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/lmdz.card	(revision 6585)
@@ -0,0 +1,132 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+LMDZ_Physics=NPv6.2
+
+# Activate the call to phytrac to run tracer simulation 
+iflag_phytrac=1
+# desactivate aerosol_strato in lmdz
+flag_aerosol_strat=0
+
+# Use XIOS as output library
+XIOS=y
+
+# Set the variable CREATE needed further below to find the initial and boundary condition files.
+CREATE=ELC-${RESOL_ATM_3D}
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=y
+chemistry_couple=y
+read_climoz=0
+ok_cdnc=y
+
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+# Specify which output file to activate and at which output_level
+# Use an integer to specify the output level or NONE if to deactivate the file
+# output_level_filename=1     : activate the corresponding file with low output level
+# output_level_filename=10    : activate the corresponding file with high output level
+# output_level_filename=NONE  : the file will not be written
+output_level_histmth = 5
+output_level_histday = NONE
+output_level_histhf  = NONE
+output_level_histmthNMC = NONE
+output_level_histdayNMC = NONE
+output_level_histhfNMC  = NONE
+output_level_histstrataer = NONE
+output_level_histdaystrataer = NONE
+output_level_histstn      = NONE
+
+# Activate COSP in config.def and set corresponding output files
+LMDZ_COSP_OK=n
+output_level_histmthCOSP = NONE
+output_level_histdayCOSP = NONE
+output_level_histhfCOSP  = NONE
+
+[InitialStateFiles]
+List= 	(${R_IN}/CHM/INCA${RESOL_CHM}/start_NAS_H2O.nc	, start.nc	) \
+	(${R_IN}/CHM/INCA${RESOL_CHM}/startphy_o2a_noTer.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=       (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
+	    (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
+
+ 
+ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt)
+
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+    	(${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def),     	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, vert.def, run.def, tracer.def, guide.def, config.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = 100Y
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/orchidee.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/orchidee.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/orchidee.card	(revision 6585)
@@ -0,0 +1,88 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=1Y
+
+
+# Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def : 
+# ROUTING=standard   => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard
+# ROUTING=simple     => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple
+# ROUTING=off        => in orchidee.def RIVER_ROUTING=n 
+ROUTING=standard
+
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soils_param.nc), \
+        (${R_IN}/SRF/SOIL/soils_param_zobler_coord.nc, soilcolor.nc), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/ROUTING/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc)
+ListNonDel= ()
+
+# to decomment if we want to calcul bvoc - for this we need to activate CHEMISTRY_BVOC in orchidee.def_Choi
+#ListNonDel= (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \
+#            (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_v22, orchidee.def)   ,\
+	(${SUBMIT_DIR}/PARAM/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE_2_2/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/stomate.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/stomate.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/stomate.card	(revision 6585)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/xios.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/xios.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/xios.card	(revision 6585)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/config.card
===================================================================
--- /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/config.card	(revision 6585)
+++ /CONFIG/UNIFORM/v7/IPSLCM7/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/config.card	(revision 6585)
@@ -0,0 +1,153 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=NASreg
+SpaceName=PROD
+ExperimentName=NMHC_AER_S
+LongName='nouvelles configs + LMDZ5 INCA5 39 + Xios + possibilite nouvelle physique '
+TagName=LMDZORINCA
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA/NMHC_AER_S
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-12-31
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1Y
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#============================
+#-- Source following file with module settings, only if it exists
+EnvFile=`pwd`/../ARCH/arch.env
+#============================
+#-- ResolAtm indicates the atmospheric resolution
+#   This variable is used in the executable name 
+ResolAtm=144x142x79
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+#============================
+ConfChem=NMHC_AER_S
+#============================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ5)
+SRF= (orchidee, orchidee_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+CHM= (inca, INCA5) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm_${ResolAtm}_orch22_${OptMode}_${ConfChem}.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("", "")
+SBG= ("", "")
+CHM= ("", "")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=1Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+
+#========================================================================
+#D-- CHM -
+[CHM]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
