Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/inca.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/inca.card	(revision 6584)
@@ -0,0 +1,137 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold or weibull10 parameter value
+wind_parameter=0.89
+#choose seasalt correctif
+seasalt_corr=1.15
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
+emi_interp_time=1
+
+
+#coupled model with Orchidee and Pisces
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#CoupOceAtm
+CoupOceAtm=y
+transm_dms_oa=y
+
+
+# Specify output frequency for output files 
+# File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_1850_phy.nc,   sflx_ANT.nc         ),\
+     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_1850_phy.nc,   sflx_BBG.nc         ),\
+     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_1850_phy.nc           ,   aircraft_mth.nc     ),\
+     (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}/oxydants_1850.nc            ,   oxydants.nc         )
+
+
+ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc			    ,   landuse.nc	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC_v2.txt			    ,   rhvEC.txt	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC_v2.txt			    ,   wthEC.txt	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC_v2.txt			    ,   clyEC.txt	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wth_v2.dat			    ,   wth.dat		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/cly_v2.dat			    ,   cly.dat		)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/rhv_v2.dat			    ,   rhv.dat		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	            ,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER.xml, file_def_inca.xml ), \
+    	(${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat)\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    Post_1D_inca_emi  ),\
+	(inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,    Post_1D_inca_species  ),\
+	(inca1d_dep.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc       ,    NONE  ),\
+	(inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    Post_1D_inca_aero  ),\
+	(inca1d_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc    ,    NONE  ),\
+	(inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
+	(inca1d_reacflux.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc   ,    NONE  ),\
+	(inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
+	(inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
+	(inca1mo_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
+	(inca1mo_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    NONE  ),\
+	(inca1mo_dep.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc       ,    NONE  ),\
+	(inca1mo_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    NONE  ),\
+	(inca1mo_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1M_inca_forcage.nc    ,    NONE  ),\
+	(inca1mo_invariants.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
+	(inca1mo_reacflux.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc   ,    NONE  ),\
+	(inca1mo_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
+	(inca1mo_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
+	(aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_emi]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (emino2, emino3, emihno3, emin2o5, emiso2, emih2s, emidms, emidmso, eminh3, emidustci, emino3ci, eminci, emibcai, emioaai, eminai, emisscs, emiso4cs, eminh4cs, emimsacs, emino3cs, emincs, emissas, emibcas, emioaas, emiso4as, eminh4as, emimsaas, emino3as, eminas, emissss, eminss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci, mmrbcas)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lim2.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lim2.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lim2.card	(revision 6584)
@@ -0,0 +1,50 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OutputLevel=1
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMO/CONFIG/SHARED/namelist_lim2_ref, namelist_ice_ref), \
+        (${SUBMIT_DIR}/PARAM/namelist_lim2_${RESOL_OCE}_cfg, namelist_ice_cfg)
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_ice.nc, restart_icemod.nc, restart_ice_in.nc)
+
+[OutputText]
+List=   (namelist_ice)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1m_icemod.nc, ${R_OUT_ICE_O_M}/${PREFIX}_1M_icemod.nc, Post_1M_icemod ), \
+        (${config_UserChoices_JobName}_1d_icemod.nc, ${R_OUT_ICE_O_D}/${PREFIX}_1D_icemod.nc, NONE )
+
+[Post_1M_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bounds)
+TimeSeriesVars2D = (ice_pres, iicetemp, iicethic, iicevelu, iicevelv, isnowthi)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bounds)
+TimeSeriesVars2D = (iicethic, iicevelu, iicevelv, ileadfra)
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lim3.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lim3.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lim3.card	(revision 6584)
@@ -0,0 +1,51 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OutputLevel=1
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/maskMFO_lim.nc , .  )
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_ice_lim3_ref                  , namelist_ice_ref       ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-lim.xml, field_def_nemo-lim.xml ), \
+        (${SUBMIT_DIR}/PARAM/namelist_lim3_cfg_${LMDZ_Physics}                           , namelist_ice_cfg       ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-lim3.xml                                      , file_def_nemo-lim.xml  )
+
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_ice.nc, restart_icemod.nc, restart_ice_in.nc)
+
+[OutputText]
+List=   (namelist_ice)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1m_icemod.nc, ${R_OUT_ICE_O_M}/${PREFIX}_1M_icemod.nc, Post_1M_icemod ), \
+        (${config_UserChoices_JobName}_1d_icemod.nc, ${R_OUT_ICE_O_D}/${PREFIX}_1D_icemod.nc, NONE )
+
+[Post_1M_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon_grid_T, nav_lat_grid_T, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (snthic, sithic, sivolu, snvolu, siconc, sisali, sitemp, sistem, siages)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon_grid_T, nav_lat_grid_T, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (snthic,sithic,sivolu,snvolu,siconc)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lmdz.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/lmdz.card	(revision 6584)
@@ -0,0 +1,226 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+LMDZ_Physics=NPv6.1
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=preind
+
+# Set pmagic in config.def
+pmagic=0.0
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=y
+read_climoz=1
+ok_cdnc=y
+
+
+carbon_cycle_cpl=y
+carbon_cycle_tr=n
+carbon_cycle_rad=n
+
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Specify which output file to activate and at which output_level
+# Use an integer to specify the output level or NONE if to deactivate the file
+# output_level_filename=1     : activate the corresponding file with low output level
+# output_level_filename=10    : activate the corresponding file with high output level
+# output_level_filename=NONE  : the file will not be written
+output_level_histmth = 5
+output_level_histday = NONE
+output_level_histhf  = NONE
+output_level_histmthNMC = NONE
+output_level_histdayNMC = NONE
+output_level_histhfNMC  = NONE
+output_level_histstrataer = NONE
+output_level_histdaystrataer = NONE
+output_level_histstn      = NONE
+
+# Activate COSP in config.def and set corresponding output files
+LMDZ_COSP_OK=n
+output_level_histmthCOSP = NONE
+output_level_histdayCOSP = NONE
+output_level_histhfCOSP  = NONE
+
+[InitialStateFiles]
+List=  ( ${R_IN}/CHM/INCA144142-L79/CM61-pre-pi-01_18491231_restart.nc , start.nc       ), \
+       ( ${R_IN}/CHM/INCA144142-L79/CM61-pre-pi-01_18491231_restartphy.nc , startphy.nc    )
+
+[BoundaryFiles]
+List=   ()
+#
+# With CMIP6 aerosols version 1
+# With 3D ozone
+ListNonDel= (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1850_1850_clim.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_piControl_ave_6bands_366days.nc, solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc),\
+            (${R_IN}/ATM/GHG/CO2_EMISSION/v1/144x142/flux_1D_CO2_2014.nc, sflx_lmdz_co2_ff.nc),\	    
+            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def), \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+	(${SUBMIT_DIR}/PARAM/tracer_CO2AER.def, tracer.def),        	    \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, tracer.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug_notroot.01, debug.root.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWdnTOA, SWupTOA, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, v10m, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, sconcoa, sconcbc, sconcso4, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (temp, theta, ovap, geop, vitu, vitv, vitw, pres, rneb, rhum, paprs, ec550aer, concoa, concbc, concso4, concss, concdust)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/oasis.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/oasis.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/oasis.card	(revision 6584)
@@ -0,0 +1,161 @@
+[Compatibility] 
+libIGCM=1.0 
+ 	 
+[UserChoices]
+OutputMode=n
+FreqCoupling=5400
+FreqCouplingRoffCalv=86400
+Lucia=n
+
+# ByPass_addnoise_sst=y : use addnoise on sst in CPL restart for following CumulPeriod only
+ByPass_addnoise_sst= n
+ByPass_PerturbExe=AddNoise
+ByPass_FileOut=sstoc
+ByPass_PerturbVar=O_SSTSST
+ByPass_PerturbAmp=0.01
+
+[InitialStateFiles]
+List=   (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}_RST_CO2/CM61-pre-pi-01_18491231_flxat_modif.nc, flxat.nc), \
+        (/ccc/work/cont003/gencmip6/lurtont/IPSLCM6.2_DMS/CM61-pre-pi-01_18491231_sstoc_modif.nc, sstoc.nc), \
+        (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}_RST_CO2/CM61-pre-pi-01_18491231_icbrg.nc, icbrg.nc), \
+        (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}_RST_CO2/CM61-pre-pi-01_18491231_icshf.nc, icshf.nc)
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/grids_v3.nc, grids.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/masks_v3.nc, masks.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/areas_v3.nc, areas.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_torc_to_tlmd_MOSAIC_v3.nc, rmp_torc_to_tlmd_MOSAIC.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_v3.nc, rmp_tlmd_to_torc_MOSAIC.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tLMD144X142_to_teORCA1.2_1storder.nc, rmp_tLMD144X142_to_teORCA1.2_1storder.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_uorc_BILINEAR_Corrected.nc, .),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_BILINEAR_Corrected.nc, .),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calving_nosouth_v3.nc, rmp_tlmd_to_torc_MOSAIC_calving_nosouth.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calving_iceberg_v3.nc, rmp_tlmd_to_torc_MOSAIC_calving_iceberg.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calving_iceshelf_v3.nc, rmp_tlmd_to_torc_MOSAIC_calving_iceshelf.nc),\
+            (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_rivflu_v4.nc, rmp_tlmd_to_torc_MOSAIC_rivflu.nc)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namcouple_ESMCO2DMS_${RESOL_CPL}, namcouple)
+
+[RestartFiles]
+List=   (flxat.nc, flxat.nc, flxat.nc),\
+    (sstoc.nc, sstoc.nc, sstoc.nc),\
+    (icbrg.nc, icbrg.nc, icbrg.nc),\
+    (icshf.nc, icshf.nc, icshf.nc)
+
+[OutputText]
+List=   (namcouple, nout.000000, lucia, oasis_balance.eps)
+
+[OutputFiles]
+List=   (SISUTESW_LMDZ_01.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SISUTESW.nc,    Post_ncks_cdo),\
+    (SIICECOV_LMDZ_02.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICECOV.nc,    Post_ncks_cdo),\
+    (SIICTEMW_LMDZ_03.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICTEMW.nc,    Post_ncks_cdo),\
+    (SIICEALW_LMDZ_04.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICEALW.nc,    Post_ncks_cdo),\
+    (CURRENTX_LMDZ_05.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTX.nc,    Post_ncks_cdo),\
+    (CURRENTY_LMDZ_06.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTY.nc,    Post_ncks_cdo),\
+    (CURRENTZ_LMDZ_07.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTZ.nc,    Post_ncks_cdo),\
+    (COTAUXXU_LMDZ_10.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXU.nc,    Post_ncks_cdo),\
+    (COTAUYYU_LMDZ_11.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYU.nc,    Post_ncks_cdo),\
+    (COTAUZZU_LMDZ_12.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZU.nc,    Post_ncks_cdo),\
+    (COTAUXXV_LMDZ_13.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXV.nc,    Post_ncks_cdo),\
+    (COTAUYYV_LMDZ_14.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYV.nc,    Post_ncks_cdo),\
+    (COTAUZZV_LMDZ_15.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZV.nc,    Post_ncks_cdo),\
+    (COWINDSP_LMDZ_16.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COWINDSP.nc,    Post_ncks_cdo),\
+    (COTOTRAI_LMDZ_17.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTRAI.nc,    Post_ncks_cdo),\
+    (COTOTSNO_LMDZ_18.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTSNO.nc,    Post_ncks_cdo),\
+    (COTOTEVA_LMDZ_19.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTEVA.nc,    Post_ncks_cdo),\
+    (COICEVAP_LMDZ_20.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COICEVAP.nc,    Post_ncks_cdo),\
+    (COQSRMIX_LMDZ_21.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQSRMIX.nc,    Post_ncks_cdo),\
+    (COQNSMIX_LMDZ_22.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQNSMIX.nc,    Post_ncks_cdo),\
+    (COSHFICE_LMDZ_23.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COSHFICE.nc,    Post_ncks_cdo),\
+    (CONSFICE_LMDZ_24.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CONSFICE.nc,    Post_ncks_cdo),\
+    (CODFLXDT_LMDZ_25.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CODFLXDT.nc,    Post_ncks_cdo),\
+    (COCALVIN_LMDZ_26.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COCALVIN.nc,    Post_ncks_cdo),\
+    (COATMCO2_LMDZ_27.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COATMCO2.nc,    Post_ncks_cdo),\
+    (COLIQRUN_LMDZ_28.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COLIQRUN.nc,    Post_ncks_cdo),\
+    (SICO2FLX_LMDZ_08.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SICO2FLX.nc,    Post_ncks_cdo),\
+    (SIDMSFLX_LMDZ_09.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIDMSFLX.nc,    Post_ncks_cdo),\
+    (O_SSTSST_oceanx_01.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_SSTSST.nc,    Post_ncks_cdo),\
+    (OIceFrc_oceanx_02.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceFrac.nc,    Post_ncks_cdo),\
+    (O_TepIce_oceanx_03.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_TepIce.nc,    Post_ncks_cdo),\
+    (O_AlbIce_oceanx_04.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_AlbIce.nc,    Post_ncks_cdo),\
+    (O_OCurx1_oceanx_05.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurx1.nc,    Post_ncks_cdo),\
+    (O_OCury1_oceanx_06.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCury1.nc,    Post_ncks_cdo),\
+    (O_OCurz1_oceanx_07.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurz1.nc,    Post_ncks_cdo),\
+    (O_OTaux1_oceanx_10.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux1.nc,    Post_ncks_cdo),\
+    (O_OTauy1_oceanx_11.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy1.nc,    Post_ncks_cdo),\
+    (O_OTauz1_oceanx_12.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz1.nc,    Post_ncks_cdo),\
+    (O_OTaux2_oceanx_13.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux2.nc,    Post_ncks_cdo),\
+    (O_OTauy2_oceanx_14.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy2.nc,    Post_ncks_cdo),\
+    (O_OTauz2_oceanx_15.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz2.nc,    Post_ncks_cdo),\
+    (O_Wind10_oceanx_16.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Wind10.nc,    Post_ncks_cdo),\
+    (OTotRain_oceanx_17.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotRain.nc,    Post_ncks_cdo),\
+    (OTotSnow_oceanx_18.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotSnow.nc,    Post_ncks_cdo),\
+    (OTotEvap_oceanx_19.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotEvap.nc,    Post_ncks_cdo),\
+    (OIceEvap_oceanx_20.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceEvap.nc,    Post_ncks_cdo),\
+    (O_QsrMix_oceanx_21.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrMix.nc,    Post_ncks_cdo),\
+    (O_QnsMix_oceanx_22.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsMix.nc,    Post_ncks_cdo),\
+    (O_QsrIce_oceanx_23.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrIce.nc,    Post_ncks_cdo),\
+    (O_QnsIce_oceanx_24.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsIce.nc,    Post_ncks_cdo),\
+    (O_dQnsdT_oceanx_25.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_dQnsdT.nc,    Post_ncks_cdo),\
+    (OCalving_oceanx_26.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OCalving.nc,    Post_ncks_cdo),\
+    (OIceberg_oceanx_27.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceberg.nc,    Post_ncks_cdo),\
+    (OIcshelf_oceanx_28.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIcshelf.nc,    Post_ncks_cdo),\
+    (O_Runoff_oceanx_29.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Runoff.nc,    Post_ncks_cdo),\
+    (O_AtmCO2_oceanx_30.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_AtmCO2.nc,    Post_ncks_cdo),\
+    (O_CO2FLX_oceanx_08.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_CO2FLX.nc,    Post_ncks_cdo),\
+    (O_DMSFLX_oceanx_09.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_DMSFLX.nc,    Post_ncks_cdo),\
+    (TEMPO_1D_cpl_atm.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_atm.nc , Post_1D_cpl_atm),\
+    (TEMPO_1D_cpl_oce.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_oce.nc , Post_1D_cpl_oce),\
+    (TEMPO_1M_cpl_atm.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_atm.nc , Post_1M_cpl_atm),\
+    (TEMPO_1M_cpl_oce.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_oce.nc , Post_1M_cpl_oce)
+
+[Post_ncks_cdo]
+Patches = (Patch_20140801_ncks_cdo)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (COTAUXXU, COTAUYYU, COTAUZZU, COTAUXXV, COTAUYYV, COTAUZZV, COWINDSP, COTOTRAI, COTOTSNO, COTOTEVA, COICEVAP, COQSRMIX, COQNSMIX, COSHFICE, CONSFICE, CODFLXDT, COCALVIN, COLIQRUN, SISUTESW, SIICECOV, SIICTEMW, SIICEALW, CURRENTX, CURRENTY, CURRENTZ, COATMCO2, SICO2FLX, SIDMSFLX)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (O_OTaux1, O_OTauy1, O_OTauz1, O_OTaux2, O_OTauy2, O_OTauz2, O_Wind10, OTotRain, OTotSnow, OTotEvap, OIceEvap, O_QsrMix, O_QnsMix, O_QsrIce, O_QnsIce, O_dQnsdT, OCalving, OIceberg, OIcshelf, O_Runoff, O_SSTSST, OIceFrc, O_TepIce, O_AlbIce, O_OCurx1, O_OCury1, O_OCurz1,  O_AtmCO2, O_CO2FLX, O_DMSFLX)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/opa9.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/opa9.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/opa9.card	(revision 6584)
@@ -0,0 +1,259 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+ORCA_version=${config_UserChoices_ORCA_version:-eORCA1.1}
+mesh_mask= n
+Reproducibility_after_restart= y
+Restart_TS_only= n
+Dynamics_on_ClosedSeas= y
+OutputLevel=2
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/coordinates.nc                     , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/coordinates_xios.nc                , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/${opa9_UserChoices_ORCA_version}_bathy_meter.nc    , bathy_meter.nc ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/runoffs_${opa9_UserChoices_ORCA_version}_depths.nc    , runoffs_eORCA1.0_depths.nc   ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/ahmcoef.nc                         , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mask_itf.nc                        , .  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/maskMFO_opa_v2.nc                  , maskMFO_opa.nc  ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/K1rowdrg.nc                        , K1rowdrg.nc     ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/M2rowdrg.nc                        , M2rowdrg.nc     ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/subbasins_v10.nc                   , subbasins.nc    ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Goutorbe_ghflux.nc                                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/conservative_temperature_WOA13_decav_Reg1L75_clim.nc ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/absolute_salinity_WOA13_decav_Reg1L75_clim.nc        ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/weights_3D_WOA13d1_2_eorca1_bilinear.nc              ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/weights_Goutorbe1_2_eorca1_bilinear.nc               ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/merged_ESACCI_BIOMER4V1R1_CHL_REG05.nc               ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/weights_reg05_2_eorca1_bilinear.nc                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mixing_power_bot.nc                                  ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mixing_power_pyc.nc                                  ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mixing_power_cri.nc                                  ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/decay_scale_bot.nc                                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/decay_scale_cri.nc                                   ,  . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/vosaline_360x180-ORCA1_WOA13_climatemonth.nc         , sali_ref_clim_monthly.nc ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc       ,.)
+
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_ref                            , namelist_ref        ), \
+        (${SUBMIT_DIR}/PARAM/ping_nemo.xml, . )                                                                  , \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/context_nemo.xml       , context_nemo.xml    ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/domain_def_nemo.xml    , domain_def_nemo.xml ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/axis_def_nemo.xml      , axis_def_nemo.xml   ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/grids_def_nemo.xml     , grids_def_nemo.xml  ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-opa.xml , field_def_nemo-opa.xml  ), \
+        (${SUBMIT_DIR}/PARAM/namelist_ESMCO2DMS_ORCA1_cfg                                 , namelist_cfg        ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-opa.xml                                        , file_def_nemo-opa.xml   )
+
+   
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart.nc,  restart.nc, restartopa.nc)
+
+[OutputText]
+List=   (ocean.output, solver.stat, namelist, output.namelist.*, context_nemo.xml, axis_def_nemo.xml, grids_def_nemo.xml, field_def_nemo.xml, domain_def_nemo.xml, out_opa.xx.out, out_opa.xx.err, debug_notroot.02, debug.root.02)
+
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1y_scalar.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_scalar.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_T.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_U.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_V.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_V.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_W.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_diaptr_T.nc  , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_diaptr_T.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1y_diaptr_W.nc  , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_diaptr_W.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1y_trdtra.nc    , ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_trdtra.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1m_scalar.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_scalar.nc     , Post_1M_scalar),\
+        (${config_UserChoices_JobName}_1m_grid_T.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_T.nc     , Post_1M_grid_T),\
+        (${config_UserChoices_JobName}_1m_grid_U.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_U.nc     , Post_1M_grid_U),\
+        (${config_UserChoices_JobName}_1m_grid_V.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_V.nc     , Post_1M_grid_V),\
+        (${config_UserChoices_JobName}_1m_grid_W.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_W.nc     , Post_1M_grid_W),\
+        (${config_UserChoices_JobName}_1m_diaptr_W.nc  , ${R_OUT_OCE_O_M}/${PREFIX}_1M_diaptr_W.nc   , Post_1M_diaptr_W),\
+        (${config_UserChoices_JobName}_1m_diaptr_T.nc  , ${R_OUT_OCE_O_M}/${PREFIX}_1M_diaptr_T.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1m_trdtra.nc    , ${R_OUT_OCE_O_M}/${PREFIX}_1M_trdtra.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_T.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_U.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_V.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_V.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_grid_W.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_5d_trdtra.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_5D_trdtra.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_grid_T.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_grid_U.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_grid_W.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_SBC.nc       , ${R_OUT_OCE_O_D}/${PREFIX}_1D_SBC.nc        , NONE          ),\
+        (${config_UserChoices_JobName}_1d_diaptr_T.nc  , ${R_OUT_OCE_O_D}/${PREFIX}_1D_diaptr_T.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1d_diaptr_W.nc  , ${R_OUT_OCE_O_D}/${PREFIX}_1D_diaptr_W.nc   , NONE          ),\
+        (${config_UserChoices_JobName}_1d_scalar.nc    , ${R_OUT_OCE_O_D}/${PREFIX}_1D_scalar.nc     , NONE          ),\
+        (mesh_mask.nc     , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_mesh_mask.nc                       , NONE),\
+        (runoffs.nc       , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_runoffs.nc                         , NONE),\
+	(damping.coeff.nc , ${R_OUT_OCE_O_D}/${PREFIX}_damping.coeff.nc                                     , NONE),\
+        (output.abort.nc  , ${R_OUT_OCE_D}/${PREFIX}_output.abort.nc                                        , NONE),\
+        (output.init.nc   , ${R_OUT_OCE_O_I}/${config_UserChoices_JobName}_${PeriodDateBegin}_output.init.nc, NONE)
+
+
+# Monthly analysis
+
+[Post_1M_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (scmastot, scvoltot, scsshtot, scsshste, scsshtst, sctemtot, scsaltot, ibgheat_tot, sbgheat_tot)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zos, tos, sos, mldr10_1, nshfls, rsntds, friver, hc300, wfo)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (thetao, so)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_W]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_diaptr_T]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zotemglo, zotematl, zotempac, zotemind, zotemipc, zosalglo, zosalatl, zosalpac, zosalind, zosalipc, zosrfglo, zosrfatl, zosrfpac, zosrfind, zosrfipc, sophtadv, sophtldf, sopstadv, sopstldf)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_diaptr_W]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zomsfglo, zomsfatl, zomsfpac, zomsfind, zomsfipc)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_trdtra]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = NONE
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ttrdtr_zdfp, ttrdtr_eivad, ttrdtr_iso, ttrdtr_totad, ttrdtr_tot, strdtr_zdfp, strdtr_eivad, strdtr_iso, strdtr_totad, strdtr_tot)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+# Daily analysis
+
+[Post_1D_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (tos, tosstd, sos, zos, zosstd, sstdcy, mldr10_1, mldr10_1dcy, mldkz5)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 100Y
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+## Yearly analysis
+
+[Post_1Y_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (scmastot, scvoltot, scsshtot, scsshste, scsshtst, sctemtot, scsaltot, ibgheat_tot, sbgheat_tot)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = (thetao, so)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (hfx, hfxba, hfxdiff, sozotaux)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (umo, vozocrtx,vozoeivu)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_diaptr_T]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zotemglo, zotematl, zotempac, zotemind, zotemipc, zosalglo, zosalatl, zosalpac, zosalind, zosalipc, zosrfglo, zosrfatl, zosrfpac, zosrfind, zosrfipc, sophtadv, sophtldf, sopstadv, sopstldf)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_diaptr_W]
+Patches = ()
+GatherWithInternal = (nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zomsfglo, zomsfatl, zomsfpac, zomsfind, zomsfipc)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/orchidee.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/orchidee.card	(revision 6584)
@@ -0,0 +1,87 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_CWRR will be selected.
+DefSuffix=CWRR
+
+# VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation. 
+#                           After the first period, VEGET_UPDATE will be set according to the choice done below.  
+VEGET_UPDATE_at_start=n
+
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=0Y
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 2
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = NONE
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 1d
+output_freq_sechiba_history_4dim = 1d
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc, . ), \
+    	(${R_IN}/SRF/SOIL/soil_bulk_and_ph.nc , .), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= ()
+ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_1850.nc, PFTmap.nc),\
+            (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_1850.nc,           woodharvest.nc)
+
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+    (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, . )                       ,\
+    (${SUBMIT_DIR}/PARAM/dr2xml_IPSL_orchidee.xml, dr2xml_orchidee.xml)                    ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee*, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, context_input_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, drainage, mrsos, mrso, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, LAImean, transpir, evapnu, lwdown, swdown, gppCrop, rhCrop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, nee, gpp, growth_resp, hetero_resp, humrel, inter, maint_resp, npp, precisol)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (snowdz, snowtemp, snowrho)
+ChunckJob3D = NONE
+Seasonal = OFF
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/pisces.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/pisces.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/pisces.card	(revision 6584)
@@ -0,0 +1,124 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OutputLevel=1
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+List=	()
+
+ListNonDel=  (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/DIC_GLODAPv2.1_annual_eORCA_R1.nc         , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Alkalini_GLODAPv2.1_annual_eORCA_R1.nc    , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/O2_WOA2009_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/PO4_WOA2009_monthly_eORCA_R1.nc           , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Si_WOA2009_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/DOC_PISCES_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Fer_PISCES_monthly_eORCA_R1.nc            , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/NO3_WOA2009_monthly_eORCA_R1.nc           , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Dust_inca_LOI/DUST_INCA_LOI6012-histAER_1M_1850.nc, dust.orca.nc       ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Dust_inca_LOI/weights_LMD144142_eORCA1_bilinear.nc, weights_lmd144142_bilin.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/pmarge_etopo_eORCA_R1.nc                  , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/river_global_news_eORCA_R1.nc             , . ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Ndep_input4MIPs/Ndep_input4MIPs_surfaceFluxes_CMIP_NCAR-CCMI-2-0_gn_185001-185012-clim.nc , ndeposition.orca.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Ndep_input4MIPs/weights_CMIP_NCAR-CCMI_eORCA1_bilinear.nc, weights_2d_bilin.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/par_fraction_gewex_clim90s00s_366days_eORCA_R1.nc , par_fraction_gewex_clim90s00s_eORCA_R1.nc ), \
+             (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/Solubility_T62_Mahowald_eORCA_R1.nc       , . )
+
+										  
+[SmoothFiles]
+List=  ()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_top_ref                             , namelist_top_ref           ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_pisces_ref                          , namelist_pisces_ref        ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_cfc_ref                             , namelist_cfc_ref           ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-pisces.xml   , field_def_nemo-pisces.xml  ), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/field_def_nemo-inerttrc.xml , field_def_nemo-inerttrc.xml), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/ORCA1_LIM3_PISCES/EXP00/CFCs_CDIAC.dat              , CFCs_CDIAC.dat             ), \
+     	(${SUBMIT_DIR}/PARAM/namelist_top_ESMCO2DMS_${RESOL_OCE}piC_cfg                                  , namelist_top_cfg           ), \
+        (${SUBMIT_DIR}/PARAM/namelist_pisces_ESMCO2DMS_${RESOL_OCE}_cfg                                  , namelist_pisces_cfg        ), \
+        (${SUBMIT_DIR}/PARAM/namelist_cfc_cfg                                                  , namelist_cfc_cfg           ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-pisces.xml                                          , file_def_nemo-pisces.xml   )
+        
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_trc.nc,  restart_trc.nc, restart_trc.nc)
+
+[OutputText]
+List=   (namelist_top_ref, namelist_cfg, namelist_pisces_ref, namelist_pisces_cfg, tracer.stat)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1y_ptrc_T.nc        , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_ptrc_T.nc    , NONE   ) , \
+        (${config_UserChoices_JobName}_1y_diad_T.nc        , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_diad_T.nc    , NONE   ) , \
+        (${config_UserChoices_JobName}_1y_inerttrc.nc      , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_inerttrc.nc  , NONE      ) , \
+    	(${config_UserChoices_JobName}_1m_bioscalar.nc     , ${R_OUT_MBG_O_M}/${PREFIX}_1M_bioscalar.nc , Post_1M_bioscalar) , \
+        (${config_UserChoices_JobName}_1m_ptrc_T.nc        , ${R_OUT_MBG_O_M}/${PREFIX}_1M_ptrc_T.nc    , NONE) , \
+        (${config_UserChoices_JobName}_1m_diad_T.nc        , ${R_OUT_MBG_O_M}/${PREFIX}_1M_diad_T.nc    , NONE) , \
+    	(${config_UserChoices_JobName}_1d_bioscalar.nc     , ${R_OUT_MBG_O_D}/${PREFIX}_1D_bioscalar.nc , NONE)
+
+[Post_1D_bioscalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_instant, time_instant_bounds)
+TimeSeriesVars2D = (pno3tot, ppo4tot, psiltot, palktot, pfertot, tcflx, tcflxcum, tcexp, tintpp, tnfix, tdenit)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_bioscalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_instant, time_instant_bounds)
+TimeSeriesVars2D = (pno3tot, ppo4tot, psiltot, palktot, pfertot, tcflx, tcflxcum, tcexp, tintpp, tnfix, tdenit)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_ptrc_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Alkalini, NCHL, DCHL, DIC, Fer, NO3, O2, PO4, Si)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_diad_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (Cflx, Dpco2, EPC100, INTPP)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (TPP)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1Y_ptrc_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Alkalini, NCHL, DCHL, DIC, Fer, NO3, O2, PO4, Si )
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_diad_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (Cflx, Dpco2, EPC100, Heup,  Nfix)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (PAR, TPP)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_inerttrc]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, olevel, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Age)
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/stomate.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/stomate.card	(revision 6584)
@@ -0,0 +1,78 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# NINPUT_UPDATE=1Y: change in nitrogen input maps every year.
+# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y.
+NINPUT_UPDATE=0Y
+
+# STOMATE_IMPOSE_CN: impose nitrogen
+# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available
+# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below
+STOMATE_IMPOSE_CN=y
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=1     : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 0 
+output_level_stomate_ipcc_history = 0
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+[InitialStateFiles]
+List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, cnleaf_map.nc)
+
+# Following files are needed if STOMATE_IMPOSE_CN=n
+# #List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\
+# #     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\
+# #     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\
+# #     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\
+# #     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \
+# #     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \
+# #     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc)
+#
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE,WOOD_HARVEST)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cProduct, lai, gpp, ra, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, cMassVariation, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest, cVegCrop, cLitterCrop, cSoilCrop, nppCrop, raCrop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/xios.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/xios.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/COMP/xios.card	(revision 6584)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=  (NONE)
+
+[OutputText]
+List=   (out_xios.x.err.*, out_xios.x.out.*, debug_notroot.03, debug.root.03)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/config.card
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/config.card	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/AER/piControl_AER_CoupOceAtm_TEST/config.card	(revision 6584)
@@ -0,0 +1,229 @@
+#
+# This is config.card file for IPSLCM6 configuration
+#
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#===========================
+JobName=ESM.Aer.Oce.01
+#----- Short Name of Experiment
+ExperimentName=piControl
+#----- TEST DEVT PROD
+SpaceName=TEST
+LongName="IPSLCM6.1.9-LR"
+ModelName=IPSL-CM6A-LR
+TagName=IPSLCM6
+#D- Choice of experiment in EXPERIMENTS directory
+ExpType=IPSLESM/AER/piControl_AER_CoupOceAtm_TEST
+ConfigType=ESMCO2CHEM
+#============================
+#-- leap, noleap, 360d
+CalendarType=leap
+#-- Experiment dates : Beginning and ending
+#-- "YYYY-MM-DD"
+DateBegin=1850-01-01
+DateEnd=1850-12-31
+#============================
+ORCA_version=eORCA1.2
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
+PeriodLength=1M
+#-- Source following file with module settings, only if it exists
+EnvFile=${SUBMIT_DIR}/../ARCH/arch.env
+#============================
+#-- ResolAtm indicates the atmospheric resolution
+#   This variable is used in the executable name 
+ResolAtm=144x142x79
+ResolOce=ORCA1
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+#============================
+ConfChem=AER
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- by default: config.card describes no restart for all components 
+#D-             ie start from Levitus or limit files
+#D- If you want to restart all components from the same simulation,
+#D-      put OveRule flag to 'y' and set the next 3 parameters
+OverRule=n
+#D- Last day of the experience used as restart for all components
+RestartDate=1849-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=1849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- OCE -
+[OCE]
+WriteFrequency="5D 1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- ICE -
+[ICE]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= y
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- MBG -
+[MBG]
+WriteFrequency="1M 1Y"
+Restart= y
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=1849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=1849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-pre-pi-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/PROD/piControl-spinup
+
+#========================================================================
+#D-- CPL -
+[CPL]
+WriteFrequency="1D 1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+# The default for starting this component is to use the files set in
+# InitialStateFiles in oasis.card.
+# Those files are coherent with restart 1849-12-31 from simulation
+# CM61-pre-pi-01 as used for the other components
+# but modified for this experience set up.
+Restart= y
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=3849-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM61-LR-pi-03g
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/gencmip6/lurtont/IGCM_OUT/IPSLCM6/PROD/piControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- CHM -
+[CHM]
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ-IPSLCM6.0.15-r3415)
+SRF= (orchidee, tag-ORCHIDEE_2_0-5627)
+SBG= (stomate, tag-ORCHIDEE_2_0-5627)
+OCE= (opa9, nemo_v3_6_STABLE-r9455)
+ICE= (lim3, nemo_v3_6_STABLE-r9455)
+MBG= (pisces, nemo_v3_6_STABLE-r9455)
+CPL= (oasis, oasis3-mct-r1818)
+CHM= (inca, INCA5) 
+IOS= (xios, xios-2.5-r1550)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm_${ResolAtm}_${OptMode}_${ConfChem}.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("" ,"" )
+SBG= ("" ,"" )
+OCE= (opa.${ConfigType}_${ResolOce}_${OptMode}, opa.xx, 360MPI)
+ICE= ("" ,"" )
+MBG= ("" ,"" )
+CPL= ("", "" )
+CHM= ("", "")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Post -
+[Post]
+ParserXIOS=FALSE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=NONE
+#D- To have only the last period in RESTART/*.tar : save 90% of volume.
+#D- TRUE to be effective (nothing by default)
+LightRestartPack=FALSE
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission (NONE if you dont want)
+TimeSeriesFrequency=NONE
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average (NONE if you dont want)
+SeasonalFrequency=NONE
+#D- If you want to produce compute PCMDI metrics from seasonal average
+#D- Set FALSE to deactivate the metrics computation.
+MetricsPCMDI=FALSE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulations years
+SeasonalFrequencyOffset=0
+
+#========================================================================
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2AER_ORCA1xLMD144142
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2AER_ORCA1xLMD144142	(revision 6583)
+++ 	(revision )
@@ -1,487 +1,0 @@
-###############################################################################
-#
-#      Input file for OASIS3
-# 
-#      This version is for use with IPSL_CM4_v1 
-#
-#      The file will be edited at runtime to update it for
-#         - the initial date of the run
-#
-###############################################################################
-#  
-#      Input delimiters have to occupy position 1 to 9 !
-#      No blank lines allowed !
-#      Length of input lines <= 80 !
-#
-###############################################################################
-#
-# NFIELDS : total number of fields being exchanged.
-#
- $NFIELDS
-            30
- $END
-###############################################################################
-#
-# NBMODEL : number of models and their names (CHAR*6).
-#
- $NBMODEL
-  2  LMDZ oceanx
- $END
-###############################################################################
-# 
-# RUNTIME: total simulated time for the actual run in seconds (<I8)
-#
- $RUNTIME
-  <total_time>
- $END
-###############################################################################
-#
-# NLOGPRT: printing level in debug file : 
-#
- $NLOGPRT
-   0 <lucia_ok>
- $END
-# 
-###############################################################################
- $STRINGS
-###############################################################################
-#
-#                      OCEAN  --->>>  ATMOS
-#                      --------------------
-# Field 1 : Weighted sea surface temperature (o->a 1)
-# 
-O_SSTSST  SISUTESW 1 <freq_coupling>  2  sstoc.nc  <output_mode> 
-362 332 144 143 torc  tlmd  LAG=<lag_oce>
-P  2 P  0
-LOCTRANS MAPPING
-# LOCTRANS: AVERAGE to average value over coupling period
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
-#         number of overlapped neighbors
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-############################################################################
-#
-# Field 2 : Sea ice extent  (o->a 2)
-#
-OIceFrc SIICECOV 44 <freq_coupling>  2  sstoc.nc <output_mode>
-362 332 144 143 torc  tlmd   LAG=<lag_oce>
-P  2 P  0
-#
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#
-############################################################################
-#
-# Field 3 : Weighted Sea Ice Temperature (o->a 3)
-#
-O_TepIce  SIICTEMW 34 <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc  tlmd   LAG=<lag_oce>
-P  2 P  0
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# 
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-############################################################################
-#
-# Field 4 : Weighted Sea ice albedo (o->a 4)
-#
-O_AlbIce  SIICEALW 17 <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc  tlmd  LAG=<lag_oce>  
-P  2 P  0
-#
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#
-############################################################################
-#
-# Field 5 : Current surface (o->a 5)
-O_OCurx1 CURRENTX 321 <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc    tlmd  LAG=<lag_oce>
-P  2 P  0
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#
-############################################################################
-#
-# Field 6 : Current surface (o->a 6)
-O_OCury1 CURRENTY 321 <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc    tlmd  LAG=<lag_oce>
-P  2 P  0
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#  
-############################################################################
-#
-# Field 7 : Current surface (o->a 7)
-O_OCurz1 CURRENTZ 321 <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc    tlmd  LAG=<lag_oce>
-P  2 P  0
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-###########################################################################
-#
-# Field 8 : Ocean Carbon flux  (o->a 8)
-O_CO2FLX SICO2FLX 38  <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc  tlmd  LAG=<lag_oce>
-P  30 P  3
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea fiel
-#
-#
-###########################################################################
-#
-#                     OCEAN   --->>>   INCA
-#                     ---------------------
-###########################################################################
-#
-# Field 9 : Ocean DMS flux  (o->a 9)
-O_DMSFLX SIDMSFLX 39  <freq_coupling>  2  sstoc.nc  <output_mode>
-362 332 144 143 torc  tlmd  LAG=<lag_oce>
-P  30 P  3
-LOCTRANS MAPPING
- AVERAGE
-# CHECKIN: indicate computation of global, land and sea field
-#
-rmp_torc_to_tlmd_MOSAIC.nc src
-# CHECKOUT: indicate computation of global, land and sea field
-#
-#
-############################################################################
-#
-#                      ATMOSPHERE  --->>>  OCEAN
-#                      -------------------------
-############################################################################   
-#
-# Field 10 : wind stress along X axis (a->o 1)
-#
-COTAUXXU O_OTaux1 23 <freq_coupling>  1  flxat.nc   <output_mode>
-144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-###########################################################################
-#
-# Field 11 : stress along Y axis (a->o 2)
-#
-COTAUYYU O_OTauy1 23 <freq_coupling>  1  flxat.nc  <output_mode>
-144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-###########################################################################
-#
-# Field 12 :wind stress along Z axis (a->o 3)
-#
-COTAUZZU O_OTauz1 23 <freq_coupling>  1  flxat.nc  <output_mode>
-144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-##########################################################################
-#
-# Field 13 : wind stress along X axis 2 (a->o 4)
-#
-COTAUXXV O_OTaux2  24 <freq_coupling>  1    flxat.nc  <output_mode>
-144 143 362 332 tlmd    vorc  LAG=<lag_atm> 
-P  0 P  2
-SCRIPR
-# CHECKIN: indicate computation of global, land and sea field integrals.
-BILINEAR LR SCALAR LATLON 10
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-##########################################################################
-#
-# Field 14 : wind stress along Y axis 2 (a->o 5) 
-#
-COTAUYYV O_OTauy2  24 <freq_coupling>  1    flxat.nc  <output_mode>
-144 143 362 332 tlmd    vorc  LAG=<lag_atm>
-P  0 P  2
-SCRIPR
-# CHECKIN: indicate computation of global, land and sea field integrals.
-BILINEAR LR SCALAR LATLON 10
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-##########################################################################
-#
-# Field 15 :  wind stress along Z axis 2 (a->o 6) 
-#
-COTAUZZV O_OTauz2  24 <freq_coupling>  1    flxat.nc  <output_mode>
-144 143 362 332 tlmd    vorc  LAG=<lag_atm>
-P  0 P  2
-SCRIPR
-# CHECKIN: indicate computation of global, land and sea field integrals.
-BILINEAR LR SCALAR LATLON 10
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-#
-# Field 16 :  wind speed 10m (a->o 7) 
-#
-COWINDSP O_Wind10  56 <freq_coupling>  1    flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm>
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_BILINEAR_Corrected.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-# 
-#########################################################################
-#
-# Field 17 : Total rain (a->o 8)
-#
-COTOTRAI OTotRain 26 <freq_coupling>  1   flxat.nc   <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-##########################################################################
-#
-# Field 18 :  Total snow (a->o 9)
-#
-COTOTSNO  OTotSnow 28 <freq_coupling>  1   flxat.nc   <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-#
-# Field 19 : Total evap (a->o 10)
-#
-COTOTEVA  OTotEvap 25 <freq_coupling>  1   flxat.nc   <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-##########################################################################
-#
-# Field 20 : Evaporation Ice  (a->o 11)
-#
-COICEVAP OIceEvap 41 <freq_coupling>  1   flxat.nc   <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm> 
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-##########################################################################
-#
-# Field 21 : Total solar heat flux (a->o 12)
-#
-COQSRMIX O_QsrMix  7 <freq_coupling> 1   flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm>
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method or mozaic parameters
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-#
-# Field 22 : Total Non solar heat flux (a->o 13)
-#
-COQNSMIX O_QnsMix 6 <freq_coupling>  1   flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc   LAG=<lag_atm>
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-###########################################################################
-#
-# Field 23 : solar heat flux on ice (a->o 14)
-#
-COSHFICE O_QsrIce  7 <freq_coupling> 1   flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm>
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method or mozaic parameters
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-############################################################################
-#
-# Field 24 : Non solar heat flux on ice (a->o 15)
-#
-CONSFICE O_QnsIce 6 <freq_coupling>  1  flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm>
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-############################################################################
-#
-# Field 25 : Non solar heat flux derivative (a->o 16)
-#
-CODFLXDT O_dQnsdT  35 <freq_coupling>  1   flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm>
-P  0 P  2
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-#
-# Field 26 : iceberg calving north (a->o 17)
-#
-COCALVIN OCalving  36 <freq_coupling_roff_calv>  2  flxat.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
-P  0 P  2
-LOCTRANS MAPPING
-AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC_calving_nosouth.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-#
-# Field 27 : iceberg melting (a->o 17)
-#
-COCALVIN OIceberg  36 <freq_coupling_roff_calv>  3  icbrg.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
-P  0 P  2
-LOCTRANS MAPPING BLASNEW
-AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC_calving_iceberg.nc dst
-0.5 0
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#########################################################################
-#
-# Field 28 : ice shelf melting (a->o 17)
-#
-COCALVIN OIcshelf  36 <freq_coupling_roff_calv>  3  icshf.nc  <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
-P  0 P  2
-LOCTRANS MAPPING BLASNEW
-AVERAGE
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tlmd_to_torc_MOSAIC_calving_iceshelf.nc dst
-0.5 0
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-##########################################################################
-#
-# Field 29 : liquid run-off (river + direct)  (a->o 18)
-#
-COLIQRUN  O_Runoff 32 <freq_coupling_roff_calv>  4  flxat.nc   <output_mode>
-144 143 362 332 aone  torc  LAG=<lag_atm_roff_calv> 
-P  0 P  2
-LOCTRANS MAPPING CONSERV BLASNEW
-AVERAGE
-# Interpolation method ou parametres mozaic
-# weights convert from kg/s to kg/m^2/s
-rmp_tlmd_to_torc_MOSAIC_rivflu.nc dst
-# CONSERV
-GLOBAL bfb
-# change units from m/s to kg/s
-1000.0 0
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-#
-# Field 30 : atmospheric CO2 concentration  (a->o 24)
-#
-COATMCO2 O_AtmCO2 37 <freq_coupling>  1   flxat.nc   <output_mode>
-144 143 362 332 tlmd    torc  LAG=<lag_atm>
-P  30 P  3
-MAPPING
-# CHECKIN: indicate computation of global, land and sea field integrals.
-# Interpolation method ou parametres mozaic
-rmp_tLMD144X142_to_teORCA1.2_1storder.nc dst
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-#
-#########################################################################
-# Field 26 : wind stress module (a->o 19)
-#
-##COTAUMOD  O_TauMod 466 <freq_coupling>  6   flxat.nc   <output_mode>
-##tlmd    torc  LAG=<lag_atm> 
-##P  0 P  2
-##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
-# Reverse
-##NORSUD WSTEST
-# CHECKIN: indicate computation of global, land and sea field integrals.
-## INT=1
-# Mask value
-##888888.
-# Extrapolation method
-##NINENN 2 1 1
-# Interpolation method
-##BICUBIPS  Z   SCALAR
-# CHECKOUT: indicate computation of global, land and sea field integrals.
-## INT=1
-#
-#########################################################################
-#
- $END
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2DMS_ORCA1xLMD144142
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2DMS_ORCA1xLMD144142	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namcouple_ESMCO2DMS_ORCA1xLMD144142	(revision 6584)
@@ -0,0 +1,487 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            30
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  LMDZ oceanx
+ $END
+###############################################################################
+# 
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+  <total_time>
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in debug file : 
+#
+ $NLOGPRT
+   0 <lucia_ok>
+ $END
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted sea surface temperature (o->a 1)
+# 
+O_SSTSST  SISUTESW 1 <freq_coupling>  2  sstoc.nc  <output_mode> 
+362 332 144 143 torc  tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrc SIICECOV 44 <freq_coupling>  2  sstoc.nc <output_mode>
+362 332 144 143 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+#
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#
+############################################################################
+#
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce  SIICTEMW 34 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# 
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce  SIICEALW 17 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd  LAG=<lag_oce>  
+P  2 P  0
+#
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#
+############################################################################
+#
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#
+############################################################################
+#
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#  
+############################################################################
+#
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 8 : Ocean Carbon flux  (o->a 8)
+O_CO2FLX SICO2FLX 38  <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd  LAG=<lag_oce>
+P  30 P  3
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea fiel
+#
+#
+###########################################################################
+#
+#                     OCEAN   --->>>   INCA
+#                     ---------------------
+###########################################################################
+#
+# Field 9 : Ocean DMS flux  (o->a 9)
+O_DMSFLX SIDMSFLX 39  <freq_coupling>  2  sstoc.nc  <output_mode>
+362 332 144 143 torc  tlmd  LAG=<lag_oce>
+P  30 P  3
+LOCTRANS MAPPING
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+# CHECKOUT: indicate computation of global, land and sea field
+#
+#
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 10 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 <freq_coupling>  1  flxat.nc   <output_mode>
+144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 11 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 12 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 362 332 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_uorc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 13 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    vorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+# CHECKIN: indicate computation of global, land and sea field integrals.
+BILINEAR LR SCALAR LATLON 10
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 14 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+# CHECKIN: indicate computation of global, land and sea field integrals.
+BILINEAR LR SCALAR LATLON 10
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 15 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+# CHECKIN: indicate computation of global, land and sea field integrals.
+BILINEAR LR SCALAR LATLON 10
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 16 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_BILINEAR_Corrected.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+# 
+#########################################################################
+#
+# Field 17 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 18 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 19 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 20 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+##########################################################################
+#
+# Field 21 : Total solar heat flux (a->o 12)
+#
+COQSRMIX O_QsrMix  7 <freq_coupling> 1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 22 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX O_QnsMix 6 <freq_coupling>  1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc   LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+###########################################################################
+#
+# Field 23 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 <freq_coupling> 1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 24 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+############################################################################
+#
+# Field 25 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 <freq_coupling>  1   flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 26 : iceberg calving north (a->o 17)
+#
+COCALVIN OCalving  36 <freq_coupling_roff_calv>  2  flxat.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING
+AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calving_nosouth.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 27 : iceberg melting (a->o 17)
+#
+COCALVIN OIceberg  36 <freq_coupling_roff_calv>  3  icbrg.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING BLASNEW
+AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calving_iceberg.nc dst
+0.5 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#########################################################################
+#
+# Field 28 : ice shelf melting (a->o 17)
+#
+COCALVIN OIcshelf  36 <freq_coupling_roff_calv>  3  icshf.nc  <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING BLASNEW
+AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calving_iceshelf.nc dst
+0.5 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+##########################################################################
+#
+# Field 29 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 <freq_coupling_roff_calv>  4  flxat.nc   <output_mode>
+144 143 362 332 aone  torc  LAG=<lag_atm_roff_calv> 
+P  0 P  2
+LOCTRANS MAPPING CONSERV BLASNEW
+AVERAGE
+# Interpolation method ou parametres mozaic
+# weights convert from kg/s to kg/m^2/s
+rmp_tlmd_to_torc_MOSAIC_rivflu.nc dst
+# CONSERV
+GLOBAL bfb
+# change units from m/s to kg/s
+1000.0 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+#
+# Field 30 : atmospheric CO2 concentration  (a->o 24)
+#
+COATMCO2 O_AtmCO2 37 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 362 332 tlmd    torc  LAG=<lag_atm>
+P  30 P  3
+MAPPING
+# CHECKIN: indicate computation of global, land and sea field integrals.
+# Interpolation method ou parametres mozaic
+rmp_tLMD144X142_to_teORCA1.2_1storder.nc dst
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+#
+#########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 <freq_coupling>  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=<lag_atm> 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2AER_ORCA1_cfg
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2AER_ORCA1_cfg	(revision 6583)
+++ 	(revision )
@@ -1,425 +1,0 @@
-
-!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-!! NEMO/OPA  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_ref
-!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-!
-!-----------------------------------------------------------------------
-&namrun        !   parameters of the run
-!-----------------------------------------------------------------------
-   cn_exp      = _AUTOBLOCKER_    !  Experience name
-   nn_it000    = _AUTOBLOCKER_    !  First time step
-   nn_itend    = _AUTOBLOCKER_    !  Last  time step
-   nn_date0    = _AUTOBLOCKER_    !  Date at nit_0000 (format yyyymmdd) used if ln_rstart=F or (ln_rstart=T and nn_rstctl=0 or 1)
-   nn_leapy    = _AUTOBLOCKER_    !  Leap year calendar (1) or not (0)
-   ln_rstart   = _AUTOBLOCKER_    !  start from rest (F) or from a restart file (T)
-   ln_rstart_ts = _AUTOBLOCKER_   !  start from rest for current only (F) or from a restart file (T)
-   nn_rstctl   = _AUTOBLOCKER_    !  Restart control => activated only if ln_rstart = T
-                           !    = 0 nn_date0 read in namelist ; nn_it000 : read in namelist
-                           !    = 1 nn_date0 read in namelist ; nn_it000 : check consistancy between namelist and restart
-                           !    = 2 nn_date0 read in restart  ; nn_it000 : check consistancy between namelist and restart
-   cn_ocerst_in  = "restartopa"   !  Suffix of ocean restart name (input)
-   cn_ocerst_indir = "."       !  directory from which to read input ocean restarts
-   cn_ocerst_out = "restart"      !  Suffix of ocean restart name (output)
-   cn_ocerst_outdir = "."      !  directory in which to write output ocean restarts
-   nn_istate   =       0   !  Output the initial state (1) or not (0)
-   nn_stock    =  _AUTOBLOCKER_   !  Frequency of creation of a restart file (modulo referenced to 1)
-   nn_write    =    5475   !  Requency of write in the output file   (modulo referenced to nn_it000)
-   ln_mskland  = .true.    !  Masks land points in NetCDF outputs
-   ln_mskutil  = .true.    !  Outputs without halos
-   ln_cfmeta   = .true.    !  output additional data to netCDF files required for compliance with the CF metadata standard
-/
-!-----------------------------------------------------------------------
-&namcfg        !   parameters of the configuration
-!-----------------------------------------------------------------------
-   cp_cfg      =  "orca"               !  name of the configuration
-   jp_cfg      =       1               !  resolution of the configuration
-   jpidta      =     362               !  1st lateral dimension ( >= jpi )
-   jpjdta      =     332               !  2nd    "         "    ( >= jpj )
-   jpkdta      =      75               !  number of levels      ( >= jpk )
-   jpiglo      =     362               !  1st dimension of global domain --> i =jpidta
-   jpjglo      =     332               !  2nd    -                  -    --> j  =jpjdta
-   jperio      =       6               !  lateral cond. type (between 0 and 6)
-/
-!-----------------------------------------------------------------------
-&namzgr        !   vertical coordinate
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namzgr_sco    !   s-coordinate or hybrid z-s-coordinate
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namdom        !   space and time domain (bathymetry, mesh, timestep)
-!-----------------------------------------------------------------------
-   nn_closea    =   1      !  remove (=0) or keep (=1) closed seas and lakes (ORCA)
-   ln_clodyn    =  _AUTOBLOCKER_      !  
-   !
-   jphgr_msh   =       0               !  type of horizontal mesh
-   ppglam0     =  999999.0             !  longitude of first raw and column T-point (jphgr_msh = 1)
-   ppgphi0     =  999999.0             ! latitude  of first raw and column T-point (jphgr_msh = 1)
-   ppe1_deg    =  999999.0             !  zonal      grid-spacing (degrees)
-   ppe2_deg    =  999999.0             !  meridional grid-spacing (degrees)
-   ppe1_m      =  999999.0             !  zonal      grid-spacing (degrees)
-   ppe2_m      =  999999.0             !  meridional grid-spacing (degrees)
-   ppsur       =   -3958.951371276829  !  ORCA r4, r2 and r05 coefficients
-   ppa0        =     103.9530096000000 ! (default coefficients)
-   ppa1        =       2.415951269000000   !
-   ppkth       =      15.35101370000000    !
-   ppacr       =       7.0             !
-   ppdzmin     =  999999.0             !  Minimum vertical spacing
-   pphmax      =  999999.0             !  Maximum depth
-   ppa2        =     100.7609285000000 !  Double tanh function parameters
-   ppkth2      =      48.02989372000000    !
-   ppacr2      =      13.00000000000   !
-   rn_rdt      = 2700.     !  time step for the dynamics (and tracer if nn_acc=0)
-   rn_hmin     =   20.
-   nn_msh      = _AUTO_    !  AUTO - Create (=1) a mesh file or not (=0)
-/
-!-----------------------------------------------------------------------
-&namsplit       
-!----------------------------------------------------------------------- 
-   ln_bt_fw      =    .FALSE.          !  leap-frog integration of barotropic equations
-   ln_bt_av      =    .TRUE.           !  Time filtering of barotropic variables
-   ln_bt_nn_auto =    .TRUE.           !  Set nn_baro automatically to be just below
-                                       !  a user defined maximum courant number (rn_bt_cmax)
-   nn_baro       =    30               !  Number of iterations of barotropic mode
-                                       !  during rn_rdt seconds. Only used if ln_bt_nn_auto=F
-   rn_bt_cmax    =    0.8              !  Maximum courant number allowed if ln_bt_nn_auto=T 
-   nn_bt_flt     =    1                !  Time filter choice
-                                       !  = 0 None
-                                       !  = 1 Boxcar over   nn_baro barotropic steps
-                                       !  = 2 Boxcar over 2*nn_baro     "        
-/
-!-----------------------------------------------------------------------
-&namcrs        !   Grid coarsening for dynamics output and/or
-               !   passive tracer coarsened online simulations
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtsd    !   data : Temperature  & Salinity
-!-----------------------------------------------------------------------
-   ln_tsd_tradmp = .false.  !  damping of ocean T & S toward T &S input data (T) or not (F)
-   sn_tem  = 'conservative_temperature_WOA13_decav_Reg1L75_clim', -1 ,'votemper' , .true. , .true. , 'yearly' , 'weights_3D_WOA13d1_2_eorca1_bilinear.nc'  ,   ''    ,    ''
-   sn_sal  = 'absolute_salinity_WOA13_decav_Reg1L75_clim'       , -1 ,'vosaline' , .true. , .true. , 'yearly' , 'weights_3D_WOA13d1_2_eorca1_bilinear.nc'  ,   ''    ,    ''
-/
-!-----------------------------------------------------------------------
-&namsbc        !   Surface Boundary Condition (surface module)
-!-----------------------------------------------------------------------
-   nn_fsbc     =  2        !  frequency of surface boundary condition computation
-                           !     (also = the frequency of sea-ice model call)
-   ln_blk_core = .false.   !  CORE bulk formulation                     (T => fill namsbc_core)
-   ln_cpl      = .true.    !  atmosphere coupled   formulation          ( requires key_oasis3 )
-   nn_limflx =   2         !  LIM3 Multi-category heat flux formulation (use -1 if LIM3 is not used)
-                           !  =-1  Use per-category fluxes, bypass redistributor, forced mode only, not yet implemented coupled
-                           !  = 0  Average per-category fluxes (forced and coupled mode)
-                           !  = 1  Average and redistribute per-category fluxes, forced mode only, not yet implemented coupled
-                           !  = 2  Redistribute a single flux over categories (coupled mode only)
-   nn_ice_embd = 1         !  AUTO - 
-                           !  =0 levitating ice (no mass exchange, concentration/dilution effect)
-                           !  =1 levitating ice with mass and salt exchange but no presure effect
-                           !  =2 embedded sea-ice (full salt and mass exchanges and pressure)
-   ln_rnf      = .false.   !  runoffs                                   (T => fill namsbc_rnf)
-   ln_ssr      = .false.   !  Sea Surface Restoring on T and/or S       (T => fill namsbc_ssr)
-   nn_fwb      = 0         !  FreshWater Budget: =0 unchecked
-   nn_isf      = 3         !  ice shelf melting/freezing                (/=0 => fill namsbc_isf)
-                           !  3 = rnf file for isf
-!-----------------------------------------------------------------------
-&namsbc_core   !   namsbc_core  CORE bulk formulae
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtra_qsr    !   penetrative solar radiation
-!-----------------------------------------------------------------------
-   sn_chl      ='merged_ESACCI_BIOMER4V1R1_CHL_REG05',  -1  , 'CHLA' , .true. , .true. , 'yearly' , 'weights_reg05_2_eorca1_bilinear.nc' , '' , ''
-   ln_traqsr   = .true.    !  Light penetration (T) or not (F)
-   ln_qsr_rgb  = .false.    !  RGB (Red-Green-Blue) light penetration
-   ln_qsr_2bd  = .false.   !  2 bands              light penetration
-   ln_qsr_bio  = .true.   !  bio-model light penetration
-/
-!-----------------------------------------------------------------------
-&namsbc_rnf    !   runoffs namelist surface boundary condition
-!-----------------------------------------------------------------------
-!              !  file name           ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
-!              !                      !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
-   sn_rnf      = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',        -1         , 'sorunoff',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
-   sn_i_rnf    = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',        -1         , 'Icb_flux',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
-   sn_cnf      = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',         0         , 'socoeff' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
-   sn_s_rnf    = 'runoffs'                         ,        24         , 'rosaline',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
-   sn_t_rnf    = 'runoffs'                         ,        24         , 'rotemper',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
-   sn_dep_rnf  = 'runoffs_eORCA1.0_depths.nc'      ,         0         , 'rodepth' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
-
-   ln_rnf_icb   = .false.    !  read in iceberg flux
-   ln_rnf_mouth = .false.    !  specific treatment at rivers mouths
-   ln_rnf_depth = .true.     !  read in depth information for runoff
-   ln_rnf_tem   = .false.    !  read in temperature information for runoff
-   ln_rnf_sal   = .false.    !  read in salinity information for runoff
-   ln_rnf_depth_ini = .false.!  compute depth at initialisation from runoff file
-   rn_rnf_max   = 0.05       !  max value of the runoff climatology over global domain ( if ln_rnf_depth_ini = .true )
-   rn_dep_max = 150.         !  depth over which runoffs is spread ( ln_rnf_depth_ini = .true )
-   nn_rnf_depth_file =  _AUTO_   ! create (=1) a runoff depth file or not (=0)
-/
-!-----------------------------------------------------------------------
-&namsbc_isf    !  Top boundary layer (ISF)
-!-----------------------------------------------------------------------
-!              ! file name ! frequency (hours) ! variable ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
-!              !           !  (if <0  months)  !   name   !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
-!              !
-   sn_rnfisf     = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sornfisf',    .false.      , .true.  , 'yearly'  ,  ''      ,   ''
-   sn_depmax_isf = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sodepmax_isf' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
-   sn_depmin_isf = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sodepmin_isf' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
-/
-!-----------------------------------------------------------------------
-&namsbc_apr    !   Atmospheric pressure used as ocean forcing or in bulk
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namsbc_ssr    !   surface boundary condition : sea surface restoring
-!-----------------------------------------------------------------------
-!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
-!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
-   sn_sss      = 'sss_absolute_salinity_WOA13_decav_Reg1L75_clim', -1. , 'sosaline', .true. , .true. , 'yearly' , 'weights_WOA13d1_2_eorca1_bilinear.nc' , ''
-/
-!-----------------------------------------------------------------------
-&namsbc_alb    !   albedo parameters
-!-----------------------------------------------------------------------
-   nn_ice_alb   =    1   !  parameterization of ice/snow albedo
-                         !     0: Shine & Henderson-Sellers (JGR 1985), giving clear-sky albedo
-                         !     1: "home made" based on Brandt et al. (JClim 2005) and Grenfell & Perovich (JGR 2004),
-                         !        giving cloud-sky albedo
-   rn_alb_sdry  =  0.87  !  dry snow albedo         : 0.80 (nn_ice_alb = 0); 0.85 (nn_ice_alb = 1); obs 0.85-0.87 (cloud-sky)
-   rn_alb_smlt  =  0.82  !  melting snow albedo     : 0.65 ( '' )          ; 0.75 ( '' )          ; obs 0.72-0.82 ( '' )
-   rn_alb_idry  =  0.65  !  dry ice albedo          : 0.72 ( '' )          ; 0.60 ( '' )          ; obs 0.54-0.65 ( '' )
-   rn_alb_imlt  =  0.58  !  bare puddled ice albedo : 0.53 ( '' )          ; 0.50 ( '' )          ; obs 0.49-0.58 ( '' )
-/
-!-----------------------------------------------------------------------
-&namsbc_cpl    !   coupling parameters
-!-----------------------------------------------------------------------
-!                    !     description       !  multiple  !    vector   !      vector          ! vector !
-!                    !                       ! categories !  reference  !    orientation       ! grids  !
-! send
-sn_snd_temp   =       'weighted oce and ice' ,    'no'    ,     ''      ,         ''           ,   ''
-sn_snd_alb    =       'weighted ice'         ,    'no'    ,     ''      ,         ''           ,   ''
-sn_snd_thick  =       'none'                 ,    'no'    ,     ''      ,         ''           ,   ''
-sn_snd_crt    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward' ,  'T'
-sn_snd_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
-sn_snd_dms    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
-! receive
-sn_rcv_w10m   =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_taumod =       'none'                 ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_tau    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward',  'U,V'
-sn_rcv_dqnsdt =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_qsr    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_qns    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_emp    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_rnf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_cal    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_icb    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-sn_rcv_isf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
-
-/
-!-----------------------------------------------------------------------
-&namberg       !   iceberg parameters
-!-----------------------------------------------------------------------
-      ln_icebergs              = .false.
-      ln_bergdia               = .false.              ! Calculate budgets
-      nn_verbose_level         = 0                    ! Turn on more verbose output if level > 0
-      nn_verbose_write         = 120                  ! Timesteps between verbose messages
-      nn_sample_rate           = 1                    ! Timesteps between sampling for trajectory storage
-                                                      ! Initial mass required for an iceberg of each class
-      rn_initial_mass          = 8.8e7, 4.1e8, 3.3e9, 1.8e10, 3.8e10, 7.5e10, 1.2e11, 2.2e11, 3.9e11, 7.4e11
-                                                      ! Proportion of calving mass to apportion to each class  
-      rn_distribution          = 0.24, 0.12, 0.15, 0.18, 0.12, 0.07, 0.03, 0.03, 0.03, 0.02
-                                                      ! Ratio between effective and real iceberg mass (non-dim)
-                                                      ! i.e. number of icebergs represented at a point         
-      rn_mass_scaling          = 2000, 200, 50, 20, 10, 5, 2, 1, 1, 1
-                                                      ! thickness of newly calved bergs (m)
-      rn_initial_thickness     = 40., 67., 133., 175., 250., 250., 250., 250., 250., 250.
-      rn_rho_bergs             = 850.                 ! Density of icebergs
-      rn_LoW_ratio             = 1.5                  ! Initial ratio L/W for newly calved icebergs
-      ln_operator_splitting    = .true.               ! Use first order operator splitting for thermodynamics
-      rn_bits_erosion_fraction = 0.                   ! Fraction of erosion melt flux to divert to bergy bits
-      rn_sicn_shift            = 0.                   ! Shift of sea-ice concn in erosion flux (0<sicn_shift<1)
-      ln_passive_mode          = .false.              ! iceberg - ocean decoupling   
-      nn_test_icebergs         =   8                  ! Create test icebergs of this class (-1 = no)
-                                                      ! Put a test iceberg at each gridpoint in box (lon1,lon2,lat1,lat2)
-      !rn_test_box              = 108.0,  116.0, -66.0, -58.0
-      rn_test_box              = -180.0,  180.0,  70.0,  90.0     !
-      rn_speed_limit           = 0.                   ! CFL speed limit for a berg   
-
-!              ! file name ! frequency (hours) !   variable   ! time interp.   !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
-!              !           !  (if <0  months)  !     name     !   (logical)    !  (T/F ) ! 'monthly' ! filename ! pairing  ! filename      !
-      sn_icb =  'calving' ,       -1           , 'calvingmask',  .true.        , .true.  , 'yearly'  , ''       , ''       , ''
-   
-      cn_dir = './' 
-/
-!-----------------------------------------------------------------------
-&namlbc        !   lateral momentum boundary condition
-!-----------------------------------------------------------------------
-   rn_shlat    =    0.0    !  shlat = 0  !  0 < shlat < 2  !  shlat = 2  !  2 < shlat
-/
-!-----------------------------------------------------------------------
-&namcla        !   cross land advection
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&nambfr        !   bottom friction
-!-----------------------------------------------------------------------
-   nn_bfr      =    2      !  type of bottom friction :   = 0 : free slip,  = 1 : linear friction
-/
-!-----------------------------------------------------------------------
-&nambbc        !   bottom temperature boundary condition
-!-----------------------------------------------------------------------
-   sn_qgh      ='Goutorbe_ghflux.nc',  -12.  , 'gh_flux'    ,   .false.     , .true. , 'yearly'  , 'weights_Goutorbe1_2_eorca1_bilinear.nc'       , ''       , ''
-   !
-   cn_dir      = './'      !  root directory for the location of the runoff files
-   nn_geoflx   =    2      !  geothermal heat flux: = 0 no flux
-/
-!-----------------------------------------------------------------------
-&nambbl        !   bottom boundary layer scheme
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&nameos        !   ocean physical parameters
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtra_adv    !   advection scheme for tracer
-!-----------------------------------------------------------------------
-   ln_traadv_tvd    =  .true.   !  TVD scheme
-   ln_traadv_ubs    =  .false.  !  UBS scheme
-/
-!-----------------------------------------------------------------------
-&namtra_adv_mle !  mixed layer eddy parametrisation (Fox-Kemper param)
-!-----------------------------------------------------------------------
-/
-!----------------------------------------------------------------------------------
-&namtra_ldf    !   lateral diffusion scheme for tracers
-!----------------------------------------------------------------------------------
-   ln_traldf_grif   =  .false.   !  griffies skew flux formulation       (require "key_ldfslp")
-   ln_traldf_gdia   =  .false.   !  griffies operator strfn diagnostics  (require "key_ldfslp")
-   ln_botmix_grif   =  .false.   !  griffies operator with lateral mixing on bottom (require "key_ldfslp")
-   rn_aht_0         =  1000.    !  horizontal eddy diffusivity for tracers [m2/s]
-   rn_aeiv_0        =  1000.    !  eddy induced velocity coefficient [m2/s]    (require "key_traldf_eiv")
-/
-!-----------------------------------------------------------------------
-&namtra_dmp    !   tracer: T & S newtonian damping
-!-----------------------------------------------------------------------
-   ln_tradmp   =  .false.  !  add a damping termn (T) or not (F)
-/
-!-----------------------------------------------------------------------
-&namdyn_adv    !   formulation of the momentum advection
-!-----------------------------------------------------------------------
-   ln_dynadv_vec = .true.  !  vector form (T) or flux form (F)
-   ln_dynadv_cen2= .false. !  flux form - 2nd order centered scheme
-   ln_dynadv_ubs = .false. !  flux form - 3rd order UBS      scheme
-   nn_dynkeg     = 1       !  scheme for grad(KE): =0  C2  ; =1  Hollingsworth correction
-/
-!-----------------------------------------------------------------------
-&nam_vvl    !   vertical coordinate options
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namdyn_vor    !   option of physics/algorithm (not control by CPP keys)
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namdyn_hpg    !   Hydrostatic pressure gradient option
-!-----------------------------------------------------------------------
-   ln_hpg_zps  = .false.   !  z-coordinate - partial steps (interpolation)
-   ln_hpg_sco  = .true.    !  s-coordinate (standard jacobian formulation)
-   !ln_hpg_isf  = .true.    !  s-coordinate (sco ) adapted to isf
-   ln_dynhpg_imp = .false. !  time stepping: semi-implicit time scheme  (T)
-                           !           centered      time scheme  (F)
-/
-!-----------------------------------------------------------------------
-&namdyn_ldf    !   lateral diffusion on momentum
-!-----------------------------------------------------------------------
-   rn_ahm_0_lap     = 20000.    !  horizontal laplacian eddy viscosity   [m2/s]
-/
-!-----------------------------------------------------------------------
-&namzdf        !   vertical physics
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namzdf_tke    !   turbulent eddy kinetic dependent vertical diffusion  ("key_zdftke")
-!-----------------------------------------------------------------------
-  nn_etau     = 0         !  penetration of tke below the mixed layer (ML) due to internal & intertial waves
-                          !    = 0 no penetration
-                          !    = 1 add a tke source below the ML
-                          !    = 2 add a tke source just at the base of the ML
-                          !    = 3 as = 1 applied on HF part of the stress    ("key_oasis3")
-  nn_mxl0     = 2         ! type of scaling under sea-ice
-                          !    = 0 no scaling under sea-ice
-                          !    = 1 scaling with constant sea-ice thickness
-                          !    = 2  scaling with mean sea-ice thickness
-                          !    = 3  scaling with maximum sea-ice thickness
-  rn_hice    = 10.        ! max constant ice thickness value when scaling under sea-ice ( nn_mxl0=1)
-  ln_lc      = .true.     !  Langmuir cell parameterisation (Axell 2002)
-  rn_lc      =  0.20      !  coef. associated to Langmuir cells
-/
-!-----------------------------------------------------------------------
-&namzdf_ddm    !   double diffusive mixing parameterization             ("key_zdfddm")
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namzdf_tmx    !   tidal mixing parameterization                        ("key_zdftmx")
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namzdf_tmx_new    !   new tidal mixing parameterization                ("key_zdftmx_new")
-!-----------------------------------------------------------------------
-   nn_zpyc     = 2         !  pycnocline-intensified dissipation scales as N (=1) or N^2 (=2)
-   ln_mevar    = .true.    !  variable (T) or constant (F) mixing efficiency
-   ln_tsdiff   = .true.    !  account for differential T/S mixing (T) or not (F)
-/
-!-----------------------------------------------------------------------
-&namsol        !   elliptic solver / island / free surface
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&nammpp        !   Massively Parallel Processing                        ("key_mpp_mpi)
-!-----------------------------------------------------------------------
-   ln_nnogather=  .true.   !
-   jpni        =   22      !  jpni   number of processors following i (set automatically if < 1)
-   jpnj        =   22      !  jpnj   number of processors following j (set automatically if < 1)
-   jpnij       =  360      !  jpnij  number of local domains (set automatically if < 1), 360 for eORCA1/IPSLCM6-LR
-/
-!-----------------------------------------------------------------------
-&namctl        !   Control prints & Benchmark
-!----------------------------------------------------------------------- 
-/
-!-----------------------------------------------------------------------
-&namptr       !   Poleward Transport Diagnostic
-!-----------------------------------------------------------------------
-   ln_diaptr  = .true.      !  Poleward heat and salt transport (T) or not (F)
-   ln_subbas  = .true.      !  Atlantic/Pacific/Indian basins computation (T) or not
-                            !  (orca configuration only, need input basins mask file named "subbasins.nc"
-/
-!-----------------------------------------------------------------------
-&namhsb       !  Heat and salt budgets
-!-----------------------------------------------------------------------
-   ln_diahsb  = .true.  
-/
-!-----------------------------------------------------------------------
-&namdyn_nept  !   Neptune effect (simplified: lateral and vertical diffusions removed)
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&nam_vvl    !   vertical coordinate options
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namzdf_gls                !   GLS vertical diffusion                   ("key_zdfgls")
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrd        !   diagnostics on dynamics and/or tracer trends
-!              !       and/or mixed-layer trends and/or barotropic vorticity
-!-----------------------------------------------------------------------
-   ln_tra_trd  = .true.   ! (T) 3D tracer trend output
-/
-!-----------------------------------------------------------------------
-&namsto       ! Stochastic parametrization of EOS
-!-----------------------------------------------------------------------
-/
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2DMS_ORCA1_cfg
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2DMS_ORCA1_cfg	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_ESMCO2DMS_ORCA1_cfg	(revision 6584)
@@ -0,0 +1,425 @@
+
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/OPA  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_ref
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!
+!-----------------------------------------------------------------------
+&namrun        !   parameters of the run
+!-----------------------------------------------------------------------
+   cn_exp      = _AUTOBLOCKER_    !  Experience name
+   nn_it000    = _AUTOBLOCKER_    !  First time step
+   nn_itend    = _AUTOBLOCKER_    !  Last  time step
+   nn_date0    = _AUTOBLOCKER_    !  Date at nit_0000 (format yyyymmdd) used if ln_rstart=F or (ln_rstart=T and nn_rstctl=0 or 1)
+   nn_leapy    = _AUTOBLOCKER_    !  Leap year calendar (1) or not (0)
+   ln_rstart   = _AUTOBLOCKER_    !  start from rest (F) or from a restart file (T)
+   ln_rstart_ts = _AUTOBLOCKER_   !  start from rest for current only (F) or from a restart file (T)
+   nn_rstctl   = _AUTOBLOCKER_    !  Restart control => activated only if ln_rstart = T
+                           !    = 0 nn_date0 read in namelist ; nn_it000 : read in namelist
+                           !    = 1 nn_date0 read in namelist ; nn_it000 : check consistancy between namelist and restart
+                           !    = 2 nn_date0 read in restart  ; nn_it000 : check consistancy between namelist and restart
+   cn_ocerst_in  = "restartopa"   !  Suffix of ocean restart name (input)
+   cn_ocerst_indir = "."       !  directory from which to read input ocean restarts
+   cn_ocerst_out = "restart"      !  Suffix of ocean restart name (output)
+   cn_ocerst_outdir = "."      !  directory in which to write output ocean restarts
+   nn_istate   =       0   !  Output the initial state (1) or not (0)
+   nn_stock    =  _AUTOBLOCKER_   !  Frequency of creation of a restart file (modulo referenced to 1)
+   nn_write    =    5475   !  Requency of write in the output file   (modulo referenced to nn_it000)
+   ln_mskland  = .true.    !  Masks land points in NetCDF outputs
+   ln_mskutil  = .true.    !  Outputs without halos
+   ln_cfmeta   = .true.    !  output additional data to netCDF files required for compliance with the CF metadata standard
+/
+!-----------------------------------------------------------------------
+&namcfg        !   parameters of the configuration
+!-----------------------------------------------------------------------
+   cp_cfg      =  "orca"               !  name of the configuration
+   jp_cfg      =       1               !  resolution of the configuration
+   jpidta      =     362               !  1st lateral dimension ( >= jpi )
+   jpjdta      =     332               !  2nd    "         "    ( >= jpj )
+   jpkdta      =      75               !  number of levels      ( >= jpk )
+   jpiglo      =     362               !  1st dimension of global domain --> i =jpidta
+   jpjglo      =     332               !  2nd    -                  -    --> j  =jpjdta
+   jperio      =       6               !  lateral cond. type (between 0 and 6)
+/
+!-----------------------------------------------------------------------
+&namzgr        !   vertical coordinate
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzgr_sco    !   s-coordinate or hybrid z-s-coordinate
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdom        !   space and time domain (bathymetry, mesh, timestep)
+!-----------------------------------------------------------------------
+   nn_closea    =   1      !  remove (=0) or keep (=1) closed seas and lakes (ORCA)
+   ln_clodyn    =  _AUTOBLOCKER_      !  
+   !
+   jphgr_msh   =       0               !  type of horizontal mesh
+   ppglam0     =  999999.0             !  longitude of first raw and column T-point (jphgr_msh = 1)
+   ppgphi0     =  999999.0             ! latitude  of first raw and column T-point (jphgr_msh = 1)
+   ppe1_deg    =  999999.0             !  zonal      grid-spacing (degrees)
+   ppe2_deg    =  999999.0             !  meridional grid-spacing (degrees)
+   ppe1_m      =  999999.0             !  zonal      grid-spacing (degrees)
+   ppe2_m      =  999999.0             !  meridional grid-spacing (degrees)
+   ppsur       =   -3958.951371276829  !  ORCA r4, r2 and r05 coefficients
+   ppa0        =     103.9530096000000 ! (default coefficients)
+   ppa1        =       2.415951269000000   !
+   ppkth       =      15.35101370000000    !
+   ppacr       =       7.0             !
+   ppdzmin     =  999999.0             !  Minimum vertical spacing
+   pphmax      =  999999.0             !  Maximum depth
+   ppa2        =     100.7609285000000 !  Double tanh function parameters
+   ppkth2      =      48.02989372000000    !
+   ppacr2      =      13.00000000000   !
+   rn_rdt      = 2700.     !  time step for the dynamics (and tracer if nn_acc=0)
+   rn_hmin     =   20.
+   nn_msh      = _AUTO_    !  AUTO - Create (=1) a mesh file or not (=0)
+/
+!-----------------------------------------------------------------------
+&namsplit       
+!----------------------------------------------------------------------- 
+   ln_bt_fw      =    .FALSE.          !  leap-frog integration of barotropic equations
+   ln_bt_av      =    .TRUE.           !  Time filtering of barotropic variables
+   ln_bt_nn_auto =    .TRUE.           !  Set nn_baro automatically to be just below
+                                       !  a user defined maximum courant number (rn_bt_cmax)
+   nn_baro       =    30               !  Number of iterations of barotropic mode
+                                       !  during rn_rdt seconds. Only used if ln_bt_nn_auto=F
+   rn_bt_cmax    =    0.8              !  Maximum courant number allowed if ln_bt_nn_auto=T 
+   nn_bt_flt     =    1                !  Time filter choice
+                                       !  = 0 None
+                                       !  = 1 Boxcar over   nn_baro barotropic steps
+                                       !  = 2 Boxcar over 2*nn_baro     "        
+/
+!-----------------------------------------------------------------------
+&namcrs        !   Grid coarsening for dynamics output and/or
+               !   passive tracer coarsened online simulations
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtsd    !   data : Temperature  & Salinity
+!-----------------------------------------------------------------------
+   ln_tsd_tradmp = .false.  !  damping of ocean T & S toward T &S input data (T) or not (F)
+   sn_tem  = 'conservative_temperature_WOA13_decav_Reg1L75_clim', -1 ,'votemper' , .true. , .true. , 'yearly' , 'weights_3D_WOA13d1_2_eorca1_bilinear.nc'  ,   ''    ,    ''
+   sn_sal  = 'absolute_salinity_WOA13_decav_Reg1L75_clim'       , -1 ,'vosaline' , .true. , .true. , 'yearly' , 'weights_3D_WOA13d1_2_eorca1_bilinear.nc'  ,   ''    ,    ''
+/
+!-----------------------------------------------------------------------
+&namsbc        !   Surface Boundary Condition (surface module)
+!-----------------------------------------------------------------------
+   nn_fsbc     =  2        !  frequency of surface boundary condition computation
+                           !     (also = the frequency of sea-ice model call)
+   ln_blk_core = .false.   !  CORE bulk formulation                     (T => fill namsbc_core)
+   ln_cpl      = .true.    !  atmosphere coupled   formulation          ( requires key_oasis3 )
+   nn_limflx =   2         !  LIM3 Multi-category heat flux formulation (use -1 if LIM3 is not used)
+                           !  =-1  Use per-category fluxes, bypass redistributor, forced mode only, not yet implemented coupled
+                           !  = 0  Average per-category fluxes (forced and coupled mode)
+                           !  = 1  Average and redistribute per-category fluxes, forced mode only, not yet implemented coupled
+                           !  = 2  Redistribute a single flux over categories (coupled mode only)
+   nn_ice_embd = 1         !  AUTO - 
+                           !  =0 levitating ice (no mass exchange, concentration/dilution effect)
+                           !  =1 levitating ice with mass and salt exchange but no presure effect
+                           !  =2 embedded sea-ice (full salt and mass exchanges and pressure)
+   ln_rnf      = .false.   !  runoffs                                   (T => fill namsbc_rnf)
+   ln_ssr      = .false.   !  Sea Surface Restoring on T and/or S       (T => fill namsbc_ssr)
+   nn_fwb      = 0         !  FreshWater Budget: =0 unchecked
+   nn_isf      = 3         !  ice shelf melting/freezing                (/=0 => fill namsbc_isf)
+                           !  3 = rnf file for isf
+!-----------------------------------------------------------------------
+&namsbc_core   !   namsbc_core  CORE bulk formulae
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_qsr    !   penetrative solar radiation
+!-----------------------------------------------------------------------
+   sn_chl      ='merged_ESACCI_BIOMER4V1R1_CHL_REG05',  -1  , 'CHLA' , .true. , .true. , 'yearly' , 'weights_reg05_2_eorca1_bilinear.nc' , '' , ''
+   ln_traqsr   = .true.    !  Light penetration (T) or not (F)
+   ln_qsr_rgb  = .false.    !  RGB (Red-Green-Blue) light penetration
+   ln_qsr_2bd  = .false.   !  2 bands              light penetration
+   ln_qsr_bio  = .true.   !  bio-model light penetration
+/
+!-----------------------------------------------------------------------
+&namsbc_rnf    !   runoffs namelist surface boundary condition
+!-----------------------------------------------------------------------
+!              !  file name           ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                      !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_rnf      = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',        -1         , 'sorunoff',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_i_rnf    = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',        -1         , 'Icb_flux',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_cnf      = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc',         0         , 'socoeff' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+   sn_s_rnf    = 'runoffs'                         ,        24         , 'rosaline',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_t_rnf    = 'runoffs'                         ,        24         , 'rotemper',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_dep_rnf  = 'runoffs_eORCA1.0_depths.nc'      ,         0         , 'rodepth' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+
+   ln_rnf_icb   = .false.    !  read in iceberg flux
+   ln_rnf_mouth = .false.    !  specific treatment at rivers mouths
+   ln_rnf_depth = .true.     !  read in depth information for runoff
+   ln_rnf_tem   = .false.    !  read in temperature information for runoff
+   ln_rnf_sal   = .false.    !  read in salinity information for runoff
+   ln_rnf_depth_ini = .false.!  compute depth at initialisation from runoff file
+   rn_rnf_max   = 0.05       !  max value of the runoff climatology over global domain ( if ln_rnf_depth_ini = .true )
+   rn_dep_max = 150.         !  depth over which runoffs is spread ( ln_rnf_depth_ini = .true )
+   nn_rnf_depth_file =  _AUTO_   ! create (=1) a runoff depth file or not (=0)
+/
+!-----------------------------------------------------------------------
+&namsbc_isf    !  Top boundary layer (ISF)
+!-----------------------------------------------------------------------
+!              ! file name ! frequency (hours) ! variable ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !           !  (if <0  months)  !   name   !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+!              !
+   sn_rnfisf     = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sornfisf',    .false.      , .true.  , 'yearly'  ,  ''      ,   ''
+   sn_depmax_isf = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sodepmax_isf' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+   sn_depmin_isf = 'runoff-icb_DaiTrenberth_Depoorter_eORCA1_JD.nc' ,   -12      ,'sodepmin_isf' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+/
+!-----------------------------------------------------------------------
+&namsbc_apr    !   Atmospheric pressure used as ocean forcing or in bulk
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namsbc_ssr    !   surface boundary condition : sea surface restoring
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_sss      = 'sss_absolute_salinity_WOA13_decav_Reg1L75_clim', -1. , 'sosaline', .true. , .true. , 'yearly' , 'weights_WOA13d1_2_eorca1_bilinear.nc' , ''
+/
+!-----------------------------------------------------------------------
+&namsbc_alb    !   albedo parameters
+!-----------------------------------------------------------------------
+   nn_ice_alb   =    1   !  parameterization of ice/snow albedo
+                         !     0: Shine & Henderson-Sellers (JGR 1985), giving clear-sky albedo
+                         !     1: "home made" based on Brandt et al. (JClim 2005) and Grenfell & Perovich (JGR 2004),
+                         !        giving cloud-sky albedo
+   rn_alb_sdry  =  0.87  !  dry snow albedo         : 0.80 (nn_ice_alb = 0); 0.85 (nn_ice_alb = 1); obs 0.85-0.87 (cloud-sky)
+   rn_alb_smlt  =  0.82  !  melting snow albedo     : 0.65 ( '' )          ; 0.75 ( '' )          ; obs 0.72-0.82 ( '' )
+   rn_alb_idry  =  0.65  !  dry ice albedo          : 0.72 ( '' )          ; 0.60 ( '' )          ; obs 0.54-0.65 ( '' )
+   rn_alb_imlt  =  0.58  !  bare puddled ice albedo : 0.53 ( '' )          ; 0.50 ( '' )          ; obs 0.49-0.58 ( '' )
+/
+!-----------------------------------------------------------------------
+&namsbc_cpl    !   coupling parameters
+!-----------------------------------------------------------------------
+!                    !     description       !  multiple  !    vector   !      vector          ! vector !
+!                    !                       ! categories !  reference  !    orientation       ! grids  !
+! send
+sn_snd_temp   =       'weighted oce and ice' ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_alb    =       'weighted ice'         ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_thick  =       'none'                 ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_crt    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward' ,  'T'
+sn_snd_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_dms    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
+! receive
+sn_rcv_w10m   =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_taumod =       'none'                 ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_tau    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward',  'U,V'
+sn_rcv_dqnsdt =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_qsr    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_qns    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_emp    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_rnf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_cal    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_icb    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_isf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+
+/
+!-----------------------------------------------------------------------
+&namberg       !   iceberg parameters
+!-----------------------------------------------------------------------
+      ln_icebergs              = .false.
+      ln_bergdia               = .false.              ! Calculate budgets
+      nn_verbose_level         = 0                    ! Turn on more verbose output if level > 0
+      nn_verbose_write         = 120                  ! Timesteps between verbose messages
+      nn_sample_rate           = 1                    ! Timesteps between sampling for trajectory storage
+                                                      ! Initial mass required for an iceberg of each class
+      rn_initial_mass          = 8.8e7, 4.1e8, 3.3e9, 1.8e10, 3.8e10, 7.5e10, 1.2e11, 2.2e11, 3.9e11, 7.4e11
+                                                      ! Proportion of calving mass to apportion to each class  
+      rn_distribution          = 0.24, 0.12, 0.15, 0.18, 0.12, 0.07, 0.03, 0.03, 0.03, 0.02
+                                                      ! Ratio between effective and real iceberg mass (non-dim)
+                                                      ! i.e. number of icebergs represented at a point         
+      rn_mass_scaling          = 2000, 200, 50, 20, 10, 5, 2, 1, 1, 1
+                                                      ! thickness of newly calved bergs (m)
+      rn_initial_thickness     = 40., 67., 133., 175., 250., 250., 250., 250., 250., 250.
+      rn_rho_bergs             = 850.                 ! Density of icebergs
+      rn_LoW_ratio             = 1.5                  ! Initial ratio L/W for newly calved icebergs
+      ln_operator_splitting    = .true.               ! Use first order operator splitting for thermodynamics
+      rn_bits_erosion_fraction = 0.                   ! Fraction of erosion melt flux to divert to bergy bits
+      rn_sicn_shift            = 0.                   ! Shift of sea-ice concn in erosion flux (0<sicn_shift<1)
+      ln_passive_mode          = .false.              ! iceberg - ocean decoupling   
+      nn_test_icebergs         =   8                  ! Create test icebergs of this class (-1 = no)
+                                                      ! Put a test iceberg at each gridpoint in box (lon1,lon2,lat1,lat2)
+      !rn_test_box              = 108.0,  116.0, -66.0, -58.0
+      rn_test_box              = -180.0,  180.0,  70.0,  90.0     !
+      rn_speed_limit           = 0.                   ! CFL speed limit for a berg   
+
+!              ! file name ! frequency (hours) !   variable   ! time interp.   !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !           !  (if <0  months)  !     name     !   (logical)    !  (T/F ) ! 'monthly' ! filename ! pairing  ! filename      !
+      sn_icb =  'calving' ,       -1           , 'calvingmask',  .true.        , .true.  , 'yearly'  , ''       , ''       , ''
+   
+      cn_dir = './' 
+/
+!-----------------------------------------------------------------------
+&namlbc        !   lateral momentum boundary condition
+!-----------------------------------------------------------------------
+   rn_shlat    =    0.0    !  shlat = 0  !  0 < shlat < 2  !  shlat = 2  !  2 < shlat
+/
+!-----------------------------------------------------------------------
+&namcla        !   cross land advection
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nambfr        !   bottom friction
+!-----------------------------------------------------------------------
+   nn_bfr      =    2      !  type of bottom friction :   = 0 : free slip,  = 1 : linear friction
+/
+!-----------------------------------------------------------------------
+&nambbc        !   bottom temperature boundary condition
+!-----------------------------------------------------------------------
+   sn_qgh      ='Goutorbe_ghflux.nc',  -12.  , 'gh_flux'    ,   .false.     , .true. , 'yearly'  , 'weights_Goutorbe1_2_eorca1_bilinear.nc'       , ''       , ''
+   !
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   nn_geoflx   =    2      !  geothermal heat flux: = 0 no flux
+/
+!-----------------------------------------------------------------------
+&nambbl        !   bottom boundary layer scheme
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nameos        !   ocean physical parameters
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_adv    !   advection scheme for tracer
+!-----------------------------------------------------------------------
+   ln_traadv_tvd    =  .true.   !  TVD scheme
+   ln_traadv_ubs    =  .false.  !  UBS scheme
+/
+!-----------------------------------------------------------------------
+&namtra_adv_mle !  mixed layer eddy parametrisation (Fox-Kemper param)
+!-----------------------------------------------------------------------
+/
+!----------------------------------------------------------------------------------
+&namtra_ldf    !   lateral diffusion scheme for tracers
+!----------------------------------------------------------------------------------
+   ln_traldf_grif   =  .false.   !  griffies skew flux formulation       (require "key_ldfslp")
+   ln_traldf_gdia   =  .false.   !  griffies operator strfn diagnostics  (require "key_ldfslp")
+   ln_botmix_grif   =  .false.   !  griffies operator with lateral mixing on bottom (require "key_ldfslp")
+   rn_aht_0         =  1000.    !  horizontal eddy diffusivity for tracers [m2/s]
+   rn_aeiv_0        =  1000.    !  eddy induced velocity coefficient [m2/s]    (require "key_traldf_eiv")
+/
+!-----------------------------------------------------------------------
+&namtra_dmp    !   tracer: T & S newtonian damping
+!-----------------------------------------------------------------------
+   ln_tradmp   =  .false.  !  add a damping termn (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namdyn_adv    !   formulation of the momentum advection
+!-----------------------------------------------------------------------
+   ln_dynadv_vec = .true.  !  vector form (T) or flux form (F)
+   ln_dynadv_cen2= .false. !  flux form - 2nd order centered scheme
+   ln_dynadv_ubs = .false. !  flux form - 3rd order UBS      scheme
+   nn_dynkeg     = 1       !  scheme for grad(KE): =0  C2  ; =1  Hollingsworth correction
+/
+!-----------------------------------------------------------------------
+&nam_vvl    !   vertical coordinate options
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_vor    !   option of physics/algorithm (not control by CPP keys)
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_hpg    !   Hydrostatic pressure gradient option
+!-----------------------------------------------------------------------
+   ln_hpg_zps  = .false.   !  z-coordinate - partial steps (interpolation)
+   ln_hpg_sco  = .true.    !  s-coordinate (standard jacobian formulation)
+   !ln_hpg_isf  = .true.    !  s-coordinate (sco ) adapted to isf
+   ln_dynhpg_imp = .false. !  time stepping: semi-implicit time scheme  (T)
+                           !           centered      time scheme  (F)
+/
+!-----------------------------------------------------------------------
+&namdyn_ldf    !   lateral diffusion on momentum
+!-----------------------------------------------------------------------
+   rn_ahm_0_lap     = 20000.    !  horizontal laplacian eddy viscosity   [m2/s]
+/
+!-----------------------------------------------------------------------
+&namzdf        !   vertical physics
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tke    !   turbulent eddy kinetic dependent vertical diffusion  ("key_zdftke")
+!-----------------------------------------------------------------------
+  nn_etau     = 0         !  penetration of tke below the mixed layer (ML) due to internal & intertial waves
+                          !    = 0 no penetration
+                          !    = 1 add a tke source below the ML
+                          !    = 2 add a tke source just at the base of the ML
+                          !    = 3 as = 1 applied on HF part of the stress    ("key_oasis3")
+  nn_mxl0     = 2         ! type of scaling under sea-ice
+                          !    = 0 no scaling under sea-ice
+                          !    = 1 scaling with constant sea-ice thickness
+                          !    = 2  scaling with mean sea-ice thickness
+                          !    = 3  scaling with maximum sea-ice thickness
+  rn_hice    = 10.        ! max constant ice thickness value when scaling under sea-ice ( nn_mxl0=1)
+  ln_lc      = .true.     !  Langmuir cell parameterisation (Axell 2002)
+  rn_lc      =  0.20      !  coef. associated to Langmuir cells
+/
+!-----------------------------------------------------------------------
+&namzdf_ddm    !   double diffusive mixing parameterization             ("key_zdfddm")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx    !   tidal mixing parameterization                        ("key_zdftmx")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx_new    !   new tidal mixing parameterization                ("key_zdftmx_new")
+!-----------------------------------------------------------------------
+   nn_zpyc     = 2         !  pycnocline-intensified dissipation scales as N (=1) or N^2 (=2)
+   ln_mevar    = .true.    !  variable (T) or constant (F) mixing efficiency
+   ln_tsdiff   = .true.    !  account for differential T/S mixing (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namsol        !   elliptic solver / island / free surface
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nammpp        !   Massively Parallel Processing                        ("key_mpp_mpi)
+!-----------------------------------------------------------------------
+   ln_nnogather=  .true.   !
+   jpni        =   22      !  jpni   number of processors following i (set automatically if < 1)
+   jpnj        =   22      !  jpnj   number of processors following j (set automatically if < 1)
+   jpnij       =  360      !  jpnij  number of local domains (set automatically if < 1), 360 for eORCA1/IPSLCM6-LR
+/
+!-----------------------------------------------------------------------
+&namctl        !   Control prints & Benchmark
+!----------------------------------------------------------------------- 
+/
+!-----------------------------------------------------------------------
+&namptr       !   Poleward Transport Diagnostic
+!-----------------------------------------------------------------------
+   ln_diaptr  = .true.      !  Poleward heat and salt transport (T) or not (F)
+   ln_subbas  = .true.      !  Atlantic/Pacific/Indian basins computation (T) or not
+                            !  (orca configuration only, need input basins mask file named "subbasins.nc"
+/
+!-----------------------------------------------------------------------
+&namhsb       !  Heat and salt budgets
+!-----------------------------------------------------------------------
+   ln_diahsb  = .true.  
+/
+!-----------------------------------------------------------------------
+&namdyn_nept  !   Neptune effect (simplified: lateral and vertical diffusions removed)
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nam_vvl    !   vertical coordinate options
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_gls                !   GLS vertical diffusion                   ("key_zdfgls")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrd        !   diagnostics on dynamics and/or tracer trends
+!              !       and/or mixed-layer trends and/or barotropic vorticity
+!-----------------------------------------------------------------------
+   ln_tra_trd  = .true.   ! (T) 3D tracer trend output
+/
+!-----------------------------------------------------------------------
+&namsto       ! Stochastic parametrization of EOS
+!-----------------------------------------------------------------------
+/
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2AER_ORCA1_cfg
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2AER_ORCA1_cfg	(revision 6583)
+++ 	(revision )
@@ -1,114 +1,0 @@
-!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-!! PISCES  :   Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_pis_ref
-!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisext     !   air-sea exchange
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-   atcco2     =  _AUTO_: DEFAULT=287.    ! Constant value atmospheric pCO2 - ln_co2int = F
-   atcn2o     =  _AUTO_: DEFAULT=280.    ! Constant value atmospheric pN2O (ppb)
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisatm     !  Atmospheric pressure 
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-  ln_presatm  = .false.   ! constant atmopsheric pressure (F) or from a file (T)
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisbio     !   biological parameters
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-   alphan2o   = 1.5e-4     ! Nitrification coefficient for n2o
-   betan2o    = 120.e-4    ! Denitrification coefficient for n2o
-   xlow       = 1.0        ! Lower boundary of suboxia for N2O production
-   xhigh      = 5.0        ! Upper boundary of suboxia for N2O production
-   sinkn2o    = 0.187      ! N2O sink term coefficient
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampislim     !   parameters for nutrient limitations
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-   xkdms     = 1.25E-9     !  DMS half saturation for bacterial loss = 1.25E-9
-   xscdiat   = 0.0018     ! S/C ratio for diatoms = 0.0018
-   xscnanom  = 0.015      ! min S/C ratio for nano = 0.015
-   xscnanov  = 0.015      ! var S/C ratio for nano = 0.015
-   xysvar    = 0.5        ! DMSP-to-DMS yield var = 0.2
-   xysmin    = 0.1        ! DMSP-to-DMS yield min = 0.4
-   xknfer    = 1.e-11       ! DMS FER  half saturation for nano = 2.e-11
-   xkdfer    = 0.5e-10       ! DMS FER  half saturation for diatoms = 1.e-10
-   xkdocdms  = 5.e-6       ! DMS DOC  half saturation = 5.e-6
-   xknpo4    = 2.e-7        ! DMS PO4  half saturation for nano = 1.e-7
-   xkdpo4    = 10.e-7        ! DMS PO4  half saturation for diatoms = 5.e-7
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisopt     !   parameters for optics
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-!              !  file name                                 ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
-!              !                                            !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
-   sn_par      = 'par_fraction_gewex_clim90s00s_eORCA_R1.nc',     24            , 'fr_par'  ,  .true.      , .true. , 'yearly'  , ''       , ''       , ''
-   ln_varpar   =  .true.   ! boolean for PAR variable
-/ 
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisprod     !   parameters for phytoplankton growth
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampismort     !   parameters for phytoplankton sinks
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampismes     !   parameters for mesozooplankton
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampiszoo     !   parameters for microzooplankton
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisfer     !   parameters for iron chemistry
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/  
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisrem     !   parameters for remineralization
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-   xlightdms  =  0.05       !: photodegradation rate constant of DMS
-   xsinkdms   =  0.4        !: microbial degradation rate of DMS
-   xvsinkdms  =  1.       !: microbial degradation rate of DMS VOGT
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampiscal     !   parameters for Calcite chemistry
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampissbc     !   parameters for inputs deposition
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-!              !  file name                           ! frequency (hours) ! variable      ! time interp. !  clim  ! 'yearly'/ ! weights        ! rotation ! land/sea mask !
-!              !                                      !  (if <0  months)  !   name        !   (logical)  !  (T/F) ! 'monthly' ! filename       ! pairing  ! filename      !
-!
-   sn_dust     = 'dust.orca.nc'                       ,    -1             , 'dust'        ,  .true.      , .true. , 'yearly'  , 'weights_lmd144142_bilin.nc', ''    , ''
-   sn_solub    = 'Solubility_T62_Mahowald_eORCA_R1.nc',    -12            , 'solubility2' ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdic = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdic'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdoc = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdoc'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdin = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdin'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdon = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdon'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdip = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdip'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdop = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdop'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_riverdsi = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdsi'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
-   sn_ndepo    = 'ndeposition.orca.nc'                ,    -1             , 'ndep'        ,  .true.      , .true. , 'yearly'  , 'weights_2d_bilin.nc', ''    , ''
-   sn_ironsed  = 'pmarge_etopo_eORCA_R1.nc'           ,    -12            , 'bathy'       ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
-   cn_dir      = './'      !  root directory for the location of the dynamical files
-   ln_dust     =  .true.   ! boolean for dust input from the atmosphere
-   ln_solub    =  .true.   ! boolean for variable solubility of atm. Iron
-   ln_river    =  .true.   ! boolean for river input of nutrients
-   ln_ndepo    =  .true.   ! boolean for atmospheric deposition of N
-   ln_ironsed  =  .true.   ! boolean for Fe input from sediments
-   ln_ironice  =  .true.   ! boolean for Fe input from sea ice
-   sedfeinput  =  1.e-9    ! Coastal release of Iron
-   nitrfix     =  1.4e-7   ! Nitrogen fixation rate
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampisdmp     !  Damping 
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-   ln_pisdmp   = .true.                      ! No relaxation for PISCES passive tracers
-   nn_pisdmp   =  _AUTO_: DEFAULT=8760       !  Frequency of Relaxation
-/
-!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-&nampismass     !  Mass conservation
-!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-/
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2DMS_ORCA1_cfg
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2DMS_ORCA1_cfg	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_pisces_ESMCO2DMS_ORCA1_cfg	(revision 6584)
@@ -0,0 +1,114 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! PISCES  :   Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_pis_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisext     !   air-sea exchange
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   atcco2     =  _AUTO_: DEFAULT=287.    ! Constant value atmospheric pCO2 - ln_co2int = F
+   atcn2o     =  _AUTO_: DEFAULT=280.    ! Constant value atmospheric pN2O (ppb)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisatm     !  Atmospheric pressure 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+  ln_presatm  = .false.   ! constant atmopsheric pressure (F) or from a file (T)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisbio     !   biological parameters
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   alphan2o   = 1.5e-4     ! Nitrification coefficient for n2o
+   betan2o    = 120.e-4    ! Denitrification coefficient for n2o
+   xlow       = 1.0        ! Lower boundary of suboxia for N2O production
+   xhigh      = 5.0        ! Upper boundary of suboxia for N2O production
+   sinkn2o    = 0.187      ! N2O sink term coefficient
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampislim     !   parameters for nutrient limitations
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkdms     = 1.25E-9     !  DMS half saturation for bacterial loss = 1.25E-9
+   xscdiat   = 0.0018     ! S/C ratio for diatoms = 0.0018
+   xscnanom  = 0.015      ! min S/C ratio for nano = 0.015
+   xscnanov  = 0.015      ! var S/C ratio for nano = 0.015
+   xysvar    = 0.5        ! DMSP-to-DMS yield var = 0.2
+   xysmin    = 0.1        ! DMSP-to-DMS yield min = 0.4
+   xknfer    = 1.e-11       ! DMS FER  half saturation for nano = 2.e-11
+   xkdfer    = 0.5e-10       ! DMS FER  half saturation for diatoms = 1.e-10
+   xkdocdms  = 5.e-6       ! DMS DOC  half saturation = 5.e-6
+   xknpo4    = 2.e-7        ! DMS PO4  half saturation for nano = 1.e-7
+   xkdpo4    = 10.e-7        ! DMS PO4  half saturation for diatoms = 5.e-7
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisopt     !   parameters for optics
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name                                 ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                                            !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_par      = 'par_fraction_gewex_clim90s00s_eORCA_R1.nc',     24            , 'fr_par'  ,  .true.      , .true. , 'yearly'  , ''       , ''       , ''
+   ln_varpar   =  .true.   ! boolean for PAR variable
+/ 
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisprod     !   parameters for phytoplankton growth
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismort     !   parameters for phytoplankton sinks
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismes     !   parameters for mesozooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiszoo     !   parameters for microzooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisfer     !   parameters for iron chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/  
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisrem     !   parameters for remineralization
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xlightdms  =  0.05       !: photodegradation rate constant of DMS
+   xsinkdms   =  0.4        !: microbial degradation rate of DMS
+   xvsinkdms  =  1.       !: microbial degradation rate of DMS VOGT
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiscal     !   parameters for Calcite chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampissbc     !   parameters for inputs deposition
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name                           ! frequency (hours) ! variable      ! time interp. !  clim  ! 'yearly'/ ! weights        ! rotation ! land/sea mask !
+!              !                                      !  (if <0  months)  !   name        !   (logical)  !  (T/F) ! 'monthly' ! filename       ! pairing  ! filename      !
+!
+   sn_dust     = 'dust.orca.nc'                       ,    -1             , 'dust'        ,  .true.      , .true. , 'yearly'  , 'weights_lmd144142_bilin.nc', ''    , ''
+   sn_solub    = 'Solubility_T62_Mahowald_eORCA_R1.nc',    -12            , 'solubility2' ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdic = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdic'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdoc = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdoc'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdin = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdin'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdon = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdon'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdip = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdip'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdop = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdop'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdsi = 'river_global_news_eORCA_R1.nc'      ,    -1             , 'riverdsi'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_ndepo    = 'ndeposition.orca.nc'                ,    -1             , 'ndep'        ,  .true.      , .true. , 'yearly'  , 'weights_2d_bilin.nc', ''    , ''
+   sn_ironsed  = 'pmarge_etopo_eORCA_R1.nc'           ,    -12            , 'bathy'       ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   cn_dir      = './'      !  root directory for the location of the dynamical files
+   ln_dust     =  .true.   ! boolean for dust input from the atmosphere
+   ln_solub    =  .true.   ! boolean for variable solubility of atm. Iron
+   ln_river    =  .true.   ! boolean for river input of nutrients
+   ln_ndepo    =  .true.   ! boolean for atmospheric deposition of N
+   ln_ironsed  =  .true.   ! boolean for Fe input from sediments
+   ln_ironice  =  .true.   ! boolean for Fe input from sea ice
+   sedfeinput  =  1.e-9    ! Coastal release of Iron
+   nitrfix     =  1.4e-7   ! Nitrogen fixation rate
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdmp     !  Damping 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_pisdmp   = .true.                      ! No relaxation for PISCES passive tracers
+   nn_pisdmp   =  _AUTO_: DEFAULT=8760       !  Frequency of Relaxation
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismass     !  Mass conservation
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2AER_ORCA1piC_cfg
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2AER_ORCA1piC_cfg	(revision 6583)
+++ 	(revision )
@@ -1,117 +1,0 @@
-!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-!! NEMO/TOP1 :  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_top_ref
-!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-!-----------------------------------------------------------------------
-&namtrc_run     !   run information
-!-----------------------------------------------------------------------
-   ln_top_euler  = .true.    !  use Euler time-stepping for TOP
-   ln_rsttr      = _AUTOBLOCKER_   !  AUTO - start from a restart file (T) or not (F)
-   nn_rsttr      = _AUTOBLOCKER_   !  AUTO - restart control = 0 initial time step is not compared to the restart file value
-                             !                  = 1 do not use the value in the restart file
-                             !                  = 2 calendar parameters read in the restart file
-   cn_trcrst_in  = "restart_trc"   !  suffix of pass. sn_tracer restart name (input)
-   cn_trcrst_out = "restart_trc"   !  suffix of pass. sn_tracer restart name (output)
-/
-!-----------------------------------------------------------------------
-&namtrc     !   tracers definition
-!-----------------------------------------------------------------------
-   ln_trcdta     =  .true.  !  Initialisation from data input file (T) or not (F)
-   ln_trcdmp_clo =  .true.  !  restoring on closed seas (T) or not (F) 
-
-
-!                !    name   !           title of the field              ! initial data ! initial data ! save   !
-!                !           !                                           !  units       ! from file    ! or not ! 
-!                !           !                                           !              ! or not       !        !
-   sn_tracer(1)   = 'DIC     ' , 'Dissolved inorganic Concentration      ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(2)   = 'Alkalini' , 'Total Alkalinity Concentration         ',  'eq/L '   ,  .true.     ,  .true.
-   sn_tracer(3)   = 'O2      ' , 'Dissolved Oxygen Concentration         ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(4)   = 'CaCO3   ' , 'Calcite Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(5)   = 'PO4     ' , 'Phosphate Concentration                ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(6)   = 'POC     ' , 'Small organic carbon Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(7)   = 'Si      ' , 'Silicate Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(8)   = 'PHY     ' , 'Nanophytoplankton Concentration        ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(9)   = 'ZOO     ' , 'Microzooplankton Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(10)  = 'DOC     ' , 'Dissolved organic Concentration        ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(11)  = 'PHY2    ' , 'Diatoms Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(12)  = 'ZOO2    ' , 'Mesozooplankton Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(13)  = 'DSi     ' , 'Diatoms Silicate Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(14)  = 'Fer     ' , 'Dissolved Iron Concentration           ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(15)  = 'BFe     ' , 'Big iron particles Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(16)  = 'GOC     ' , 'Big organic carbon Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(17)  = 'SFe     ' , 'Small iron particles Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(18)  = 'DFe     ' , 'Diatoms iron  Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(19)  = 'GSi     ' , 'Sinking biogenic Silicate Concentration',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(20)  = 'NFe     ' , 'Nano iron Concentration                ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(21)  = 'NCHL    ' , 'Nano chlorophyl Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(22)  = 'DCHL    ' , 'Diatoms chlorophyl Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(23)  = 'NO3     ' , 'Nitrates Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
-   sn_tracer(24)  = 'NH4     ' , 'Ammonium Concentration                 ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(25)  = 'N2O     ' , 'Nitrous Oxide Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
-   sn_tracer(26)  = 'DMS     ' , 'Dimethylsulfide Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
-/
-!-----------------------------------------------------------------------
-&namtrc_dta      !    Initialisation from data input file
-!-----------------------------------------------------------------------
-!                !                 file name               ! frequency (hours) ! variable   ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
-!                !                                         !  (if <0  months)  !   name     !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
-   sn_trcdta(1)  = 'DIC_GLODAPv2.1_annual_eORCA_R1.nc'     ,        -12        ,  'PiDIC'   ,    .false.   , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(2)  = 'Alkalini_GLODAPv2.1_annual_eORCA_R1.nc',        -12        ,  'Alkalini',    .false.   , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(3)  = 'O2_WOA2009_monthly_eORCA_R1.nc'        ,        -1         ,  'O2'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(5)  = 'PO4_WOA2009_monthly_eORCA_R1.nc'       ,        -1         ,  'PO4'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(7)  = 'Si_WOA2009_monthly_eORCA_R1.nc'        ,        -1         ,  'Si'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(10) = 'DOC_PISCES_monthly_eORCA_R1.nc'        ,        -1         ,  'DOC'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(14) = 'Fer_PISCES_monthly_eORCA_R1.nc'        ,        -1         ,  'Fer'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
-   sn_trcdta(23) = 'NO3_WOA2009_monthly_eORCA_R1.nc'       ,        -1         ,  'NO3'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
-   rn_trfac(1)   =   1.028e-06  !  multiplicative factor
-   rn_trfac(2)   =   1.028e-06  !  -      -      -     -
-   rn_trfac(3)   =  44.6e-06  !  -      -      -     -
-   rn_trfac(5)   = 122.0e-06  !  -      -      -     -
-   rn_trfac(7)   =   1.0e-06  !  -      -      -     -
-   rn_trfac(10)  =   1.0e-06  !  -      -      -     -
-   rn_trfac(14)  =   1.0e-06  !  -      -      -     -
-   rn_trfac(23)  =   7.6e-06  !  -      -      -     -
-/
-!-----------------------------------------------------------------------
-&namtrc_adv    !   advection scheme for passive tracer 
-!-----------------------------------------------------------------------
-   ln_trcadv_tvd     =  .false.  !  TVD scheme
-   ln_trcadv_muscl   =  .true.   !  MUSCL scheme
-/
-!-----------------------------------------------------------------------
-&namtrc_ldf    !   lateral diffusion scheme for passive tracer 
-!-----------------------------------------------------------------------
-   rn_fact_lap      =     15.    !     enhanced zonal eddy diffusivity
-/
-!-----------------------------------------------------------------------
-&namtrc_zdf        !   vertical physics
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrc_rad        !  treatment of negative concentrations 
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrc_dmp    !   passive tracer newtonian damping
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrc     !   tracers definition
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrc_ice       !    Representation of sea ice growth & melt effects
-!-----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrc_trd       !   diagnostics on tracer trends        ('key_trdtrc')
-!                          or mixed-layer trends          ('key_trdmld_trc')
-!----------------------------------------------------------------------
-/
-!-----------------------------------------------------------------------
-&namtrc_dia       !   parameters for passive tracer additional diagnostics
-!----------------------------------------------------------------------
-/
-!----------------------------------------------------------------------
-&namtrc_bc        !   data for boundary conditions
-!-----------------------------------------------------------------------
-/
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2DMS_ORCA1piC_cfg
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2DMS_ORCA1piC_cfg	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/namelist_top_ESMCO2DMS_ORCA1piC_cfg	(revision 6584)
@@ -0,0 +1,117 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/TOP1 :  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_top_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!-----------------------------------------------------------------------
+&namtrc_run     !   run information
+!-----------------------------------------------------------------------
+   ln_top_euler  = .true.    !  use Euler time-stepping for TOP
+   ln_rsttr      = _AUTOBLOCKER_   !  AUTO - start from a restart file (T) or not (F)
+   nn_rsttr      = _AUTOBLOCKER_   !  AUTO - restart control = 0 initial time step is not compared to the restart file value
+                             !                  = 1 do not use the value in the restart file
+                             !                  = 2 calendar parameters read in the restart file
+   cn_trcrst_in  = "restart_trc"   !  suffix of pass. sn_tracer restart name (input)
+   cn_trcrst_out = "restart_trc"   !  suffix of pass. sn_tracer restart name (output)
+/
+!-----------------------------------------------------------------------
+&namtrc     !   tracers definition
+!-----------------------------------------------------------------------
+   ln_trcdta     =  .true.  !  Initialisation from data input file (T) or not (F)
+   ln_trcdmp_clo =  .true.  !  restoring on closed seas (T) or not (F) 
+
+
+!                !    name   !           title of the field              ! initial data ! initial data ! save   !
+!                !           !                                           !  units       ! from file    ! or not ! 
+!                !           !                                           !              ! or not       !        !
+   sn_tracer(1)   = 'DIC     ' , 'Dissolved inorganic Concentration      ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(2)   = 'Alkalini' , 'Total Alkalinity Concentration         ',  'eq/L '   ,  .true.     ,  .true.
+   sn_tracer(3)   = 'O2      ' , 'Dissolved Oxygen Concentration         ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(4)   = 'CaCO3   ' , 'Calcite Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(5)   = 'PO4     ' , 'Phosphate Concentration                ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(6)   = 'POC     ' , 'Small organic carbon Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(7)   = 'Si      ' , 'Silicate Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(8)   = 'PHY     ' , 'Nanophytoplankton Concentration        ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(9)   = 'ZOO     ' , 'Microzooplankton Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(10)  = 'DOC     ' , 'Dissolved organic Concentration        ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(11)  = 'PHY2    ' , 'Diatoms Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(12)  = 'ZOO2    ' , 'Mesozooplankton Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(13)  = 'DSi     ' , 'Diatoms Silicate Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(14)  = 'Fer     ' , 'Dissolved Iron Concentration           ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(15)  = 'BFe     ' , 'Big iron particles Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(16)  = 'GOC     ' , 'Big organic carbon Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(17)  = 'SFe     ' , 'Small iron particles Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(18)  = 'DFe     ' , 'Diatoms iron  Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(19)  = 'GSi     ' , 'Sinking biogenic Silicate Concentration',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(20)  = 'NFe     ' , 'Nano iron Concentration                ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(21)  = 'NCHL    ' , 'Nano chlorophyl Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(22)  = 'DCHL    ' , 'Diatoms chlorophyl Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(23)  = 'NO3     ' , 'Nitrates Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(24)  = 'NH4     ' , 'Ammonium Concentration                 ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(25)  = 'N2O     ' , 'Nitrous Oxide Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(26)  = 'DMS     ' , 'Dimethylsulfide Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+/
+!-----------------------------------------------------------------------
+&namtrc_dta      !    Initialisation from data input file
+!-----------------------------------------------------------------------
+!                !                 file name               ! frequency (hours) ! variable   ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!                !                                         !  (if <0  months)  !   name     !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_trcdta(1)  = 'DIC_GLODAPv2.1_annual_eORCA_R1.nc'     ,        -12        ,  'PiDIC'   ,    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(2)  = 'Alkalini_GLODAPv2.1_annual_eORCA_R1.nc',        -12        ,  'Alkalini',    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(3)  = 'O2_WOA2009_monthly_eORCA_R1.nc'        ,        -1         ,  'O2'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(5)  = 'PO4_WOA2009_monthly_eORCA_R1.nc'       ,        -1         ,  'PO4'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(7)  = 'Si_WOA2009_monthly_eORCA_R1.nc'        ,        -1         ,  'Si'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(10) = 'DOC_PISCES_monthly_eORCA_R1.nc'        ,        -1         ,  'DOC'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(14) = 'Fer_PISCES_monthly_eORCA_R1.nc'        ,        -1         ,  'Fer'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(23) = 'NO3_WOA2009_monthly_eORCA_R1.nc'       ,        -1         ,  'NO3'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   rn_trfac(1)   =   1.028e-06  !  multiplicative factor
+   rn_trfac(2)   =   1.028e-06  !  -      -      -     -
+   rn_trfac(3)   =  44.6e-06  !  -      -      -     -
+   rn_trfac(5)   = 122.0e-06  !  -      -      -     -
+   rn_trfac(7)   =   1.0e-06  !  -      -      -     -
+   rn_trfac(10)  =   1.0e-06  !  -      -      -     -
+   rn_trfac(14)  =   1.0e-06  !  -      -      -     -
+   rn_trfac(23)  =   7.6e-06  !  -      -      -     -
+/
+!-----------------------------------------------------------------------
+&namtrc_adv    !   advection scheme for passive tracer 
+!-----------------------------------------------------------------------
+   ln_trcadv_tvd     =  .false.  !  TVD scheme
+   ln_trcadv_muscl   =  .true.   !  MUSCL scheme
+/
+!-----------------------------------------------------------------------
+&namtrc_ldf    !   lateral diffusion scheme for passive tracer 
+!-----------------------------------------------------------------------
+   rn_fact_lap      =     15.    !     enhanced zonal eddy diffusivity
+/
+!-----------------------------------------------------------------------
+&namtrc_zdf        !   vertical physics
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_rad        !  treatment of negative concentrations 
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_dmp    !   passive tracer newtonian damping
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc     !   tracers definition
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_ice       !    Representation of sea ice growth & melt effects
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_trd       !   diagnostics on tracer trends        ('key_trdtrc')
+!                          or mixed-layer trends          ('key_trdmld_trc')
+!----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_dia       !   parameters for passive tracer additional diagnostics
+!----------------------------------------------------------------------
+/
+!----------------------------------------------------------------------
+&namtrc_bc        !   data for boundary conditions
+!-----------------------------------------------------------------------
+/
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_CO2AER
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_CO2AER	(revision 6584)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_CO2AER	(revision 6584)
@@ -0,0 +1,13 @@
+&version=1.0
+&lmdz
+default hadv=10 vadv=10 phases=g type=tracer parent=air
+H2O hadv=14 vadv=14
+H2O phases=ls
+&co2i
+default hadv=10 vadv=10 phases=g type=tracer parent=air
+CO2
+&inca
+default parent=air phases=g hadv=10 vadv=10
+Rn222
+Pb210
+NO2,NO3,HNO3,N2O5,SO2,H2S,DMS,DMSO,NH3,CIDUSTM,CINO3M,CIN,AIBCM,AIPOMM,AIN,CSSSM,CSSO4M,CSNH4M,CSMSAM,CSNO3M,CSN,ASSSM,ASBCM,ASPOMM,ASSO4M,ASNH4M,ASMSAM,ASNO3M,ASN,SSSSM,SSN
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_ESMCO2AER
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/GENERAL/PARAM/tracer.def_ESMCO2AER	(revision 6583)
+++ 	(revision )
@@ -1,13 +1,0 @@
-&version=1.0
-&lmdz
-default hadv=10 vadv=10 phases=g type=tracer parent=air
-H2O hadv=14 vadv=14
-H2O phases=ls
-&co2i
-default hadv=10 vadv=10 phases=g type=tracer parent=air
-CO2
-&inca
-default parent=air phases=g hadv=10 vadv=10
-Rn222
-Pb210
-NO2,NO3,HNO3,N2O5,SO2,H2S,DMS,DMSO,NH3,CIDUSTM,CINO3M,CIN,AIBCM,AIPOMM,AIN,CSSSM,CSSO4M,CSNH4M,CSMSAM,CSNO3M,CSN,ASSSM,ASBCM,ASPOMM,ASSO4M,ASNH4M,ASMSAM,ASNO3M,ASN,SSSSM,SSN
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/SOURCES/LMDZ/oasis.F90
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/SOURCES/LMDZ/oasis.F90	(revision 6583)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/SOURCES/LMDZ/oasis.F90	(revision 6584)
@@ -86,8 +86,4 @@
   INTEGER, PARAMETER :: maxrecv_phys = 9      ! Maximum number of fields to receive in physiq (without fields receive in inca model)
   
-#ifdef CPP_CPLOCNINCA
-!AC  INTEGER, PARAMETER :: idr_ocedms = 1
-!AC  INTEGER, PARAMETER :: maxrcv = 1
-#endif
 
   TYPE, PUBLIC ::   FLD_CPL            ! Type for coupling field information
@@ -269,7 +265,4 @@
    ENDIF
  
-!AC#ifdef CPP_CPLOCNINCA
-!AC       inforcv(idr_ocedms)%action = .TRUE. ; inforcv(idr_ocedms)%name = 'SIDMSFLX'
-!AC#endif
 
     
@@ -361,25 +354,7 @@
 #ifdef INCA
     IF (dms_cycle_cpl) THEN
-       CALL init_inca_oasis(inforecv(idr_ocedms))
-    ENDIF
-#endif
-
-    
-!AC! Now, if also coupling CPL with INCA, initialize here fields to be exchanged.
-!AC#ifdef CPP_CPLOCNINCA
-!AC    DO jf=1,maxrcv 
-!AC       IF (inforcv(jf)%action) THEN
-!AC          CALL prism_def_var_proto(inforcv(jf)%nid, inforcv(jf)%name, il_part_id, &
-!AC               il_var_nodims, PRISM_In, il_var_actual_shape, il_var_type, &
-!AC               ierror)
-!AC          IF (ierror .NE. PRISM_Ok) THEN
-!AC             WRITE(lunout,*) 'inicma : Problem with prism_def_var_proto for field : ',&
-!AC                  inforcv(jf)%name
-!AC             abort_message=' Problem in call to prism_def_var_proto for fields to receive'
-!AC             CALL abort_physic(modname,abort_message,1)
-!AC          ENDIF
-!AC       ENDIF
-!AC    END DO
-!AC#endif
+       CALL init_inca_oasis(inforecv(idr_ocedms:idr_ocedms))
+    ENDIF
+#endif
  
 !************************************************************************************
Index: CONFIG/UNIFORM/v6/IPSLCM6.3/compile_ipslcm6.sh
===================================================================
--- CONFIG/UNIFORM/v6/IPSLCM6.3/compile_ipslcm6.sh	(revision 6583)
+++ CONFIG/UNIFORM/v6/IPSLCM6.3/compile_ipslcm6.sh	(revision 6584)
@@ -73,5 +73,5 @@
          [ESMCO2] Compile IPSLCM6 for CO2 interactif ocean/atmosphere.
          [ESMCHEM] Compile IPSLCM6 for chemistry interactif on atmosphere
-         [ESMCO2AER] Compile IPSLCM6 for both interactive CO2 and chemistry, and also with transfer of species from PISCES to INCA.
+         [ESMCO2CHEM] Compile IPSLCM6 for both interactive CO2 and chemistry, and also with transfer of species from PISCES to INCA.
          [-full] Full recompilation of all components. This option can be added to all other options.
          [-cleannemo] Full recompilation of NEMO component  only.
@@ -117,5 +117,5 @@
 	"ESMCO2")      esmco2=y;  shift ;; 
 	"ESMCHEM")      esmchem=y; shift ;; 
-	"ESMCO2AER")   esmco2=y; esmchem=y; shift ;;
+	"ESMCO2CHEM")   esmco2=y; esmchem=y; shift ;;
 	"CE0L")        ce0l=y ; shift ;;
 	"-rad")        rad=$2; shift ; shift;;
@@ -355,5 +355,5 @@
 	mv $nemo_root/$cfg_wrk/BLD/bin/nemo.exe $modipsl/bin/opa.ESMCO2_${resol_oce}_${optmode}
     elif [ ${esmco2} == y ] && [ ${esmchem} == y ] ;  then
-    mv $nemo_root/$cfg_wrk/BLD/bin/nemo.exe $modipsl/bin/opa.ESMCO2AER_${resol_oce}_${optmode}
+    mv $nemo_root/$cfg_wrk/BLD/bin/nemo.exe $modipsl/bin/opa.ESMCO2CHEM_${resol_oce}_${optmode}
     else
 	mv $nemo_root/$cfg_wrk/BLD/bin/nemo.exe $modipsl/bin/opa_${resol_oce}_${optmode}
