Index: CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/dynamico.card
===================================================================
--- CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/dynamico.card	(revision 6406)
+++ CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/dynamico.card	(revision 6406)
@@ -0,0 +1,63 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+RESOL_NBP=40
+RESOL_ATM_Z=79
+
+# create_etat0_limit=n is used for normal GCM run
+create_etat0_limit = n
+
+# iflag_phys=1 is used for normal GCM run with continents (not aquaplanet)
+# iflag_phys is only used in combination with create_etat0_limit=y. See specific CREATE set up to know more.
+iflag_phys=1
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+
+[InitialStateFiles]
+List=   (${R_IN}/ATM/START/dynamico_lmdz_nbp${RESOL_NBP}/start.nc, .)
+         
+
+[BoundaryFiles]
+List=()
+ListNonDel= ()
+
+#uncomment if you are running in nudge mode
+#List=($CCCSTOREDIR/../../subipsl/subipsl/ERA5/NETCDF/GLOBAL_025/4xdaily/AN_PL/${year}/u.${year}${month}.aphe5.GLOBAL_025.nc, u.nc),\
+#     ($CCCSTOREDIR/../../subipsl/subipsl/ERA5/NETCDF/GLOBAL_025/4xdaily/AN_PL/${year}/v.${year}${month}.aphe5.GLOBAL_025.nc, v.nc)
+
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   \
+   	(${SUBMIT_DIR}/PARAM/earth_const.def, .),\
+   	(${SUBMIT_DIR}/PARAM/run_dynamico.def_nbp${RESOL_NBP}, run_dynamico.def),\
+   	(${SUBMIT_DIR}/PARAM/iodef.xml, .),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/context_dynamico.xml, .),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/context_input_dynamico.xml, .),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/field_def_dynamico.xml, .),\
+   	(${MODIPSL}/modeles/DYNAMICO/xml/file_def_dynamico.xml, .),\
+   	(${SUBMIT_DIR}/PARAM/nudging_dynamico.xml, .)
+
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc)
+
+[OutputText]
+List=   (run_dynamico.def, earth_const.def, iodef.xml, context_dynamico.xml, context_input_dynamico.xml, field_def_dynamico.xml, file_def_dynamico.xml, out_icosa_lmdz.exe.out, out_icosa_lmdz.exe.err, xios_client_*)
+
+
+[OutputFiles]
+List=   (output_dcmip2016_native.nc,    ${R_OUT_ICO_O_H}/${PREFIX}_3H_output_dcmip2016_native.nc,     NONE), \
+        (output_dcmip2016_regular.nc,   ${R_OUT_ICO_O_H}/${PREFIX}_3H_output_dcmip2016_regular.nc,    NONE)
+
+
+#List=	( limit.nc,       ${R_OUT_ICO_O}/Boundary/${config_UserChoices_JobName}_clim_limit.nc,   NONE), \
+#	( start.nc,       ${R_OUT_ICO_O}/Restart/${config_UserChoices_JobName}_clim_start.nc,    NONE), \
+#	( startphy.nc,    ${R_OUT_ICO_O}/Restart/${config_UserChoices_JobName}_clim_startphy.nc, NONE)
+
Index: CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/lmdz.card	(revision 6406)
+++ CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/lmdz.card	(revision 6406)
@@ -0,0 +1,211 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+LMDZ_Physics=NPv6.2
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=actuel
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
+
+# Specify which output file to activate and at which output_level
+# Use an integer to specify the output level or NONE if to deactivate the file
+# output_level_filename=1     : activate the corresponding file with low output level
+# output_level_filename=10    : activate the corresponding file with high output level
+# output_level_filename=NONE  : the file will not be written
+
+output_level_histmth = 5
+output_level_histday = 3
+output_level_histhf  = NONE
+output_level_histmthNMC = NONE
+output_level_histdayNMC = NONE
+output_level_histhfNMC  = NONE
+output_level_histstrataer = NONE
+output_level_histstn      = NONE
+
+# Activate COSP in config.def and set corresponding output files
+LMDZ_COSP_OK=n
+output_level_histmthCOSP = NONE
+output_level_histdayCOSP = NONE
+output_level_histhfCOSP  = NONE
+
+
+[InitialStateFiles]
+# start.nc and startphy.nc are both set in dynamico.card to easier insure coherence of the files
+List=(${R_IN}/ATM/START/dynamico_lmdz_nbp${RESOL_NBP}/startphy.nc, .)
+
+[BoundaryFiles]
+List=()
+#
+# With CMIP6 aerosols version 1
+# With 3D ozone
+ListNonDel= (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/nbp${RESOL_NBP}_365d/limit_1979_2008_clim.nc, limit.nc),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/144x142/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\
+            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/nbp${RESOL_NBP}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\
+            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
+            (${R_IN}/ATM/STRATAERO/CMIP6/v3/144x142/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/tracer.def, .),                                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_input_lmdz.xml, . ),      \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \
+        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, . ),   	 	    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, run.def, tracer.def, config.def, vert.def, used_run.def, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    Post_1M_histmthNMC),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = 100Y 
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/orchidee.card	(revision 6406)
+++ CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/orchidee.card	(revision 6406)
@@ -0,0 +1,92 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Select the PFT and age class set-up. NOTE: the number of PFTs should match the 
+# number in the land cover and maps. The number of age classes does not affect the
+# maps that can be used.
+DefSuffix = 15pft.1ac
+
+# VEGET_UPDATE_at_start=y : orchidee.driver will set VEGET_UPDATE=1Y at the first cumul period when starting a new simulation. 
+#                           After the first period, VEGET_UPDATE will be set according to the choice done below.  
+VEGET_UPDATE_at_start=n
+
+# VEGET_UPDATE=0Y : default, do not update the vegetation and woodharvest file except if starting without restart file
+# VEGET_UPDATE=1Y : update the vegetation and woodharvest file 1st of January each year
+VEGET_UPDATE=0Y
+
+# Choice for routing scheme. Set ROUTING below to have following parameters set in orchidee.def : 
+# ROUTING=standard   => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=standard
+# ROUTING=simple     => in orchidee.def RIVER_ROUTING=y and ROUTING_METHOD=simple
+# ROUTING=off        => in orchidee.def RIVER_ROUTING=n 
+ROUTING=simple
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/SOIL/soils_param4.nc, soils_param.nc ), \
+	(${R_IN}/SRF/SOIL/soil_bulk_and_ph.nc, .), \
+	(${R_IN}/SRF/reftemp4.nc, reftemp.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min4.nc, cartepente2d_15min.nc)
+
+[BoundaryFiles]
+List= ()
+ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v2/PFTmap_2000.nc, PFTmap.nc),\
+	    (${R_IN}/SRF/ROUTING/routing_simple.nc, .)
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_v4, orchidee.def)   ,\
+        (${SUBMIT_DIR}/PARAM/orchidee_pft.def_${DefSuffix}_v4, orchidee_pft.def) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+ 	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_routing_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc) ,\
+        (routing_restart.nc, routing_restart.nc, routing_start.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, context_routing_orchidee.xml, context_input_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing_daily, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/stomate.card	(revision 6406)
+++ CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/stomate.card	(revision 6406)
@@ -0,0 +1,78 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# NINPUT_UPDATE=1Y: change in nitrogen input maps every year. 
+# Nitrogen input maps should be set in BoundaryFiles/List for 1Y or in InitialStateFile for 0Y.
+NINPUT_UPDATE=0Y
+
+# STOMATE_IMPOSE_CN: impose nitrogen
+# If STOMATE_IMPOSE_CN=y the file leaf_cn.nc must be available except if STOMATE_READ_CN=n
+# If STOMATE_IMPOSE_CN=n the other N-input files are needed, see commented files below
+STOMATE_IMPOSE_CN=n
+
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+# cnleaf_map.nc is needed if STOMATE_IMPOSE_CN=y
+#List=    (${R_IN}/SRF/NITROGEN/CN_LEAF/cn_leaf_1850_v0.nc, cnleaf_map.nc)
+
+# Following files are needed if STOMATE_IMPOSE_CN=n
+List=   (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_pasture_2000.nc, nfert_pasture.nc) ,\
+     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/synthetic/historical/Nfer_cropland_2000.nc, nfert_cropland.nc) ,\
+     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_pasture_2000.nc, nmanure_pasture.nc) ,\
+     (${R_IN}/SRF/NITROGEN/N_FERTILISATION/NMIP/manure/historical/Nmanure_cropland_2000.nc, nmanure_cropland.nc) ,\
+     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_nhx_2000.nc, ndep_nhx.nc), \
+     (${R_IN}/SRF/NITROGEN/N_DEPOSITION/CCMI_ndep/historical/CCMI_ndep_noy_2000.nc, ndep_noy.nc), \
+     (${R_IN}/SRF/NITROGEN/BNF/bnf_1850.nc, bnf.nc)
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/xios.card
===================================================================
--- CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/xios.card	(revision 6406)
+++ CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/COMP/xios.card	(revision 6406)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*, xios_server_*, out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/config.card
===================================================================
--- CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/config.card	(revision 6406)
+++ CONFIG/UNIFORM/v7/ICOLMDZOR_v7/EXPERIMENTS/ICOLMDZOR/clim_noleap_ORCHv4/config.card	(revision 6406)
@@ -0,0 +1,149 @@
+# $Id$
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=ICOlmdzor.01
+LongName="dynamico + lmdz + orchidee v4(trunk) "
+TagName=ICOLMDZOR
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=ICOLMDZOR/clim_noleap_ORCHv4
+ExperimentName=clim
+SpaceName=TEST
+#============================
+#D-- leap, noleap, 360d
+CalendarType=noleap
+#D-- Begin and end of job 
+#D-- "YYYY-MM-DD"
+#D-- The year for this experiement has no significance as the SST/SIC are mean values over a whole period. 
+#D-- Change the DateEnd if you change CalendarType, set DateEnd=2000-12-31 for leap or noleap.
+DateBegin=2000-01-01
+DateEnd=2000-12-31
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1Y
+#============================
+#-- Compression level for netcdf output files
+CompressionLevel=2
+#============================
+# Source following file with module settings
+EnvFile=${SUBMIT_DIR}/../ARCH/arch.env
+#============================
+# OptMode indicates the optimization mode choosen during compilation
+# This variable is used in the executable name
+OptMode=prod
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ICO= (dynamico, DYNAMICO)
+ATM= (lmdz, LMDZ)
+SRF= (orchidee, ORCHIDEE)
+SBG= (stomate, ORCHIDEE)
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+ICO= (icosa_lmdz_${OptMode}.exe, icosa_lmdz.exe, 80MPI, 4OMP)
+ATM= ("","")
+SRF= ("", "")
+SBG= ("", "")
+IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=
+#D- Define restart simulation name
+RestartJobName=
+#D- Path Server Group Login
+RestartPath=
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- PackFrequency determines the frequency of pack submission
+PackFrequency=1Y
+#D- TimeSeriesFreqency determines the frequency of post-processing submission
+#D- Set NONE to deactivate the creation of all time series 
+TimeSeriesFrequency=10Y
+#D- SeasonalFrequency determines the length for each seasonal average
+#D- Set NONE to deactivate the creation of all seasonal avereage
+SeasonalFrequency=10Y
+#D- If you want to produce compute PCMDI metrics from seasonal average
+#D- Set FALSE to deactivate the metrics computation.
+MetricsPCMDI=FALSE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulations years
+SeasonalFrequencyOffset=0
+
+#========================================================================
+#D-- ICO -
+[ICO]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- ATM -
+[ATM]
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=
+# Define restart simulation name
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+# Old component name for restart (if empty, use new name)
+
+
