Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
@@ -20,4 +22,5 @@
 #be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
 emi_interp_time=1
+
 
 
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card.xios
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card.xios	(revision 5919)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER/COMP/inca.card.xios	(revision 5919)
@@ -0,0 +1,134 @@
+
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+xios_read=y
+# Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (for 10m winds) parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH 
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1 ) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
+emi_interp_time=1
+
+
+# Specify output frequency for output files 
+# File aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage it from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+
+[InitialStateFiles]
+List= ()
+
+	
+[BoundaryFiles]
+List= (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc,   sflx_ANT_LR.nc ),\
+      (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc,   sflx_BBG_LR.nc ),\
+     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc	            		,   landuse.nc		),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            		,   npp.nc		),\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/oxydants_nitrate.nc	            ,   oxydants.nc	)\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc ,   sflx_GHG_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc ,   sflx_NAT_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc ,   sflx_MISC_LR.nc    )\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc	    				 		,   dustEC.nc)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	            ,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_AER_inca.xml, context_start_inca.xml)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_AER.xml, file_def_inca.xml ), \
+    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)  
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_emi.nc         ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc        ,    NONE  ),\
+	(inca1d_species.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc    ,    Post_1D_inca_species  ),\
+	(inca1d_dep.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc       ,    NONE  ),\
+	(inca1d_aero.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc       ,    Post_1D_inca_aero  ),\
+	(inca1d_forcage.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc    ,    Post_1D_inca_forcage),\
+	(inca1d_invariants.nc  ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_invariants.nc ,    NONE  ),\
+	(inca1d_reacflux.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc   ,    NONE  ),\
+	(inca1d_chem.nc        ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc       ,    NONE  ),\
+	(inca1d_washrate.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc   ,    NONE  ),\
+	(inca1mo_emi.nc         ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc        ,    NONE  ),\
+	(inca1mo_species.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc    ,    NONE  ),\
+	(inca1mo_dep.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc       ,    NONE  ),\
+	(inca1mo_aero.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc       ,    NONE  ),\
+	(inca1mo_forcage.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc    ,    NONE  ),\
+	(inca1mo_invariants.nc  ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_invariants.nc ,    NONE  ),\
+	(inca1mo_reacflux.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc   ,    NONE  ),\
+	(inca1mo_chem.nc        ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc       ,    NONE  ),\
+	(inca1mo_washrate.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc   ,    NONE  ),\
+	(aerosols_from_inca.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,    NONE  )
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (mmrso4cs, mmrso4as, mmrdms, mmrssss, mmrbcai, mmrdustci)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_SS,SWTOAAS_DUST, SWTOAAS_DNO3,SWTOAAS_SNO3, SWTOAAS_FNO3)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_historical/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_pdControl/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_pdControl/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/AER_pdControl/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LDMZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card.xios
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card.xios	(revision 5919)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/DUSS/COMP/inca.card.xios	(revision 5919)
@@ -0,0 +1,145 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
+emi_interp_time=1
+xios_read=y
+
+
+# Specify output frequency for output files 
+# you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_veget=NONE
+
+[InitialStateFiles]
+List= ($CCCSCRATCHDIR/IGCM_OUT/LMDZORINCA/TEST/DUSS/DUSSdevreadxios.1/CHM/Restart/DUSSdevreadxios.1_20060101_chem_restart.nc, chem_start.nc)
+#List= ()
+
+#	
+#[BoundaryFiles]
+#List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_phy.nc,   sflx_ANT.nc         ),\
+#     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_phy.nc,   sflx_BBG.nc         ),\
+#     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+#
+#ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc		            ,   npp.nc		)\
+#            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_GHG.nc  ,   sflx_GHG.nc     )\
+#            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_MISC.nc ,   sflx_MISC.nc    )\
+#            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/sflx_lmdz_NAT.nc  ,   sflx_NAT.nc     )\
+#	    (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc		            ,   landuse.nc	)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt		            ,   rhvEC.txt	)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt		            ,   wthEC.txt	)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt		            ,   clyEC.txt	)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat		            ,   wth.dat		)\
+#            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat		            ,   cly.dat		)\
+# 	    (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat		            ,   rhv.dat		)\
+#	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	            ,   phototable.dat	)
+#
+#
+#
+#[ParametersFiles]
+#List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+#	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+#	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+#	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
+#	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \
+#    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
+#
+
+
+	
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc	,   sflx_ANT_LR.nc 	),\
+     (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc	,   sflx_BBG_LR.nc 	),\
+     (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+
+ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc 		,   sflx_GHG_LR.nc     	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc 		,   sflx_NAT_LR.nc     	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc 		,   sflx_MISC_LR.nc    	),\
+	    (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc	            		,   landuse.nc		),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            		,   npp.nc		),\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc			 		,   dustEC.nc)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	            ,   phototable.dat	)
+
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_DUSS_inca.xml, context_start_inca.xml)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_DUSS.xml, file_def_inca.xml), \
+    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
+
+
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_aero.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    ,  Post_1D_inca_aero  ),\
+	(inca1d_reacflux.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc,  NONE  ),\
+	(inca1d_forcage.nc ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc ,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   ,  Post_1D_inca_veget  ),\
+	(inca1mo_aero.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    ,  NONE  ),\
+	(inca1mo_reacflux.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc,  NONE  ),\
+	(inca1mo_forcage.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc ,  NONE  ),\
+	(inca1mo_veget.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   ,  NONE  )
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550ssss, od550ssas,od550sscs,od550dustci, loaddustci, loadsscs, loadssas,loadssss, emidustci, emissas, emissss, emisscs)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_AER,SWTOAAS_DUST,SWTOAAS_SS)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card.xios
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card.xios	(revision 5919)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES/COMP/inca.card.xios	(revision 5919)
@@ -0,0 +1,86 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+xios_read=y
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) 
+emi_interp_time=1
+
+# Specify output frequency for output files 
+# you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_ges=1d
+
+
+[InitialStateFiles]
+List= ()
+
+	
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+
+ListNonDel= (${R_IN}/CHM/INCA${RESOL_CHM}/oxydants_nitrate.nc	            	        ,   oxydants.nc		)\
+	    (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc	            		,   landuse.nc		),\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            		,   npp.nc		),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc	,   sflx_ANT_LR.nc 	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc	,   sflx_BBG_LR.nc 	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc 		,   sflx_GHG_LR.nc     	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc 		,   sflx_NAT_LR.nc     	),\
+	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc 		,   sflx_MISC_LR.nc    	),\
+	    (/ccc/work/cont003/gen2201/lloretth/co2_carbonator_1deg.nc			,   co2_carbonator.nc	),\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   	            		,   phototable.dat	)
+
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def					  , .				),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml		  , .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml	  , .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml	  , .				),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_co2_inca.xml	  , .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml	  , .				),\
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_GES_inca.xml  , context_start_inca.xml	),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml	  , .			      	),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml	  , file_def_inca_restart.xml 	),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml	  , file_def_inca.xml 		),\
+    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat	  , inca.dat			)
+
+	
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1d_ges.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_ges.nc, Post_1D_inca_ges  ),\
+	(inca1mo_ges.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_ges.nc, NONE  )
+
+
+
+
+[Post_1D_inca_ges]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, , time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrch4,vmrco,vmrco2oc,vmrco2bim,vmrco2bih,jn2o,jmcf)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/GES_LR/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NAS_LR/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card	(revision 5919)
@@ -4,4 +4,5 @@
 
 [UserChoices]
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card.xios
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card.xios	(revision 5919)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card.xios	(revision 5919)
@@ -0,0 +1,116 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+xios_read=y
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=y
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) 
+emi_interp_time=1
+
+
+
+# Specify output frequency for output files 
+# File inca_oxydants will be systematically write in output with a monthly frequency - you cannot manage it from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+
+[InitialStateFiles]
+List= ()
+
+
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc	            ,   landuse.nc	)\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            ,   npp.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc			    ,   o3clim.nc	)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc			    ,   so4.nc		)\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc,   sflx_ANT_LR.nc ),\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc,   sflx_BBG_LR.nc ),\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc ,   sflx_GHG_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc ,   sflx_NAT_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc ,   sflx_MISC_LR.nc    )\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   		    ,   phototable.dat	)
+
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC.xml, file_def_inca.xml), \
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
+    	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_NMHC_inca.xml   , context_start_inca.xml	),\
+    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat, inca.dat)
+
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,context_start_inca.xml, iodef.xml, field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+ List=	(inca1d_emi.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     ,    NONE  ),\
+	(inca1d_species.nc ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc ,    Post_1D_inca_species  ),\
+	(inca1d_dep.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc     ,    NONE  ),\
+	(inca1d_chem.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    ,    Post_1D_inca_chem  ),\
+	(inca1d_reacflux.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc,    NONE  ),\
+	(inca1d_washrate.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  ),\
+	(inca1mo_emi.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     ,    NONE  ),\
+	(inca1mo_species.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc ,    NONE  ),\
+	(inca1mo_dep.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc     ,    NONE  ),\
+	(inca1mo_chem.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    ,    NONE  ),\
+	(inca1mo_reacflux.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc,    NONE  ),\
+	(inca1mo_washrate.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc,    NONE  ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE  )
+
+
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,vmrno3, vmrhno3)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card.xios
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card.xios	(revision 5919)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card.xios	(revision 5919)
@@ -0,0 +1,157 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+xios_read=y
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (10m winds)  parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=1
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
+emi_interp_time=1
+
+
+# Specify output frequency for output files 
+# Files inca_oxydants and aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage them from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_aero_chem=1ts
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
+    
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc								,   landuse.nc	)\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            						,   npp.nc		)\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc	,   sflx_ANT_LR.nc ),\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc	,   sflx_BBG_LR.nc ),\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc 	    	,   sflx_GHG_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc     	    	,   sflx_NAT_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc 		,   sflx_MISC_LR.nc    )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3clim_lmdz_phy_2000.nc     				 		,   o3clim.nc     	)\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc			    				 		,   dustEC.nc)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   		    				 		,   phototable.dat  )
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def					, .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml		, .			),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_NAS_inca.xml, context_start_inca.xml)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml        , .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER.xml, file_def_inca.xml	),\
+    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat					, inca.dat		)
+
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml,inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1ts_aero_chem.nc   ,      ${R_OUT_CHM_O_H}/${PREFIX}_1H_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_aero_chem.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_emi.nc     	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     	,  NONE                  ),\
+	(inca1d_species.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc 	,  Post_1D_inca_species  ),\
+	(inca1d_dep.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc    	,  NONE                  ),\
+	(inca1d_chem.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    	,  Post_1D_inca_chem     ),\
+	(inca1d_aero.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    	,  Post_1D_inca_aero     ),\
+	(inca1d_phtrate.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1d_reacflux.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc	,  NONE                  ),\
+	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
+	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   	,  Post_1D_inca_veget    ),\
+	(inca1mo_aero_chem.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1mo_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
+	(inca1mo_species.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc 	,  NONE                  ),\
+	(inca1mo_dep.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc    	,  NONE                  ),\
+	(inca1mo_chem.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    	,  NONE                  ),\
+	(inca1mo_aero.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    	,  NONE                  ),\
+	(inca1mo_phtrate.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1mo_reacflux.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc	,  NONE                  ),\
+	(inca1mo_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
+	(inca1mo_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
+	(inca1mo_veget.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   	,  NONE                  ),\
+	(aerosols_from_inca.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE		 ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
+ChunckJob3D = NONE
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 5918)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card	(revision 5919)
@@ -4,4 +4,6 @@
 
 [UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=n
 # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
 LMDZ_10m_winds=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card.xios
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card.xios	(revision 5919)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC_AER_S/COMP/inca.card.xios	(revision 5919)
@@ -0,0 +1,163 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+#choose if input file will be regrid by xios, or read without regrid with netcdf
+xios_read=y
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+#choose threshold (10m winds) parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=n
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=2
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc ) 
+emi_interp_time=1
+
+
+# Specify output frequency for output files 
+# Files inca_oxydants and aerosols_from_inca will be systematically write in output with a monthly frequency - you cannot manage them from this card
+# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
+# if you choose 1d the file will be store in CHM/Output/DA
+# if you choose 1mo the file will be store in CHM/Output/MO
+# if you choose another frequency, the file will be store in CHM/Output/DA by default
+output_frequency_aero_chem=1ts
+output_frequency_chem=1d
+output_frequency_emi=1d
+output_frequency_species=1d
+output_frequency_forcage=1d
+output_frequency_aero=1d
+output_frequency_dep=1d
+output_frequency_washrate=NONE
+output_frequency_veget=NONE
+output_frequency_reacflux=NONE
+output_frequency_phtrate=NONE
+output_frequency_invariants=NONE
+
+[InitialStateFiles]
+List= ()
+
+	
+[BoundaryFiles]
+List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     ),\
+     (${R_IN}/CHM/IPCC_AR6/SAD/${RESOL_CHM}/sad_cmip6_${year}.nc                     ,   sad.nc	      	   )
+
+    
+ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc								,   landuse.nc	)\
+	    (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc		            						,   npp.nc		)\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3clim_lmdz_phy_2000.nc     ,   o3clim.nc     	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc         ,   o3lin.nc	)\
+            (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat                         ,   lglived.dat	)\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc	,   sflx_ANT_LR.nc ),\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc	,   sflx_BBG_LR.nc ),\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc 	    	,   sflx_GHG_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc     	    	,   sflx_NAT_LR.nc     )\
+	    (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc 		,   sflx_MISC_LR.nc    )\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_sc0_lmdz_phy.nc      ,   aircraft_hs.nc  )\
+	    (${R_IN}/CHM/FILES_LONxLAT/dustincaEC.nc			    				 		,   dustEC.nc)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat   		    ,   phototable.dat  )
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def					, .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml		, .			),\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_dust_inca.xml, .)   ,\
+        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_NAS_inca.xml, context_start_inca.xml)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml        , .			),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER.xml, file_def_inca.xml	),\
+    	(${MODIPSL}/bin/inca_${ResolAtm}_${OptMode}_${ConfChem}.dat					, inca.dat		)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc)
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1ts_aero_chem.nc   ,      ${R_OUT_CHM_O_H}/${PREFIX}_1H_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_aero_chem.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_emi.nc     	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     	,  NONE                  ),\
+	(inca1d_species.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc 	,  Post_1D_inca_species  ),\
+	(inca1d_dep.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc    	,  NONE                  ),\
+	(inca1d_chem.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    	,  Post_1D_inca_chem     ),\
+	(inca1d_aero.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    	,  Post_1D_inca_aero     ),\
+	(inca1d_phtrate.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1d_reacflux.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc	,  NONE                  ),\
+	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
+	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   	,  Post_1D_inca_veget    ),\
+	(inca1mo_aero_chem.nc   ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1mo_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
+	(inca1mo_species.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc 	,  NONE                  ),\
+	(inca1mo_dep.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc    	,  NONE                  ),\
+	(inca1mo_chem.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    	,  NONE                  ),\
+	(inca1mo_aero.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    	,  NONE                  ),\
+	(inca1mo_phtrate.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1mo_reacflux.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc	,  NONE                  ),\
+	(inca1mo_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
+	(inca1mo_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
+	(inca1mo_veget.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   	,  NONE                  ),\
+	(aerosols_from_inca.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE		 ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas,od550so4as, od550so4cs, od550ssas,od550ssss, od550sscs,od550dustci,od550bcai,od550oaai, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,,mmrso4cs, mmrso4as, mmrdms, mmrssss, vmrno3, vmrhno3, mmrbcai, mmrdustci)
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = (SWTOAAS_ANT, SWTOAAS_AER, SWTOAAS_NAT, SWTOAAS_BC, SWTOAAS_SO4, SWTOAAS_POM, SWTOAAS_DUST, SWTOAAS_SS, SWTOAAS_DNO3, SWTOASS_SNO3,  SWTOAAS_FNO3)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emi_isop,emi_mono)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (flx_iso,flx_mono,flx_ORVOC,flx_acetal)
+ChunckJob3D = NONE
+Seasonal=OFF
