Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/inca.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/inca.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/inca.card	(revision 5893)
@@ -0,0 +1,154 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
+LMDZ_10m_winds=y
+# Set 10m_Winds_method to choose which way we will use to work with 10m wind from gcm (so if LMDZ_10m_winds=y)
+#10m_winds_method=weibull10 --> use weibull method for 10m wind from gcm,
+#10m_winds_method=threshold --> use threshold method for 10m wind from gcm
+10m_winds_method=threshold
+#choose threshold or weibull10 parameter value
+wind_parameter=0.85
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=1
+#choose sedimentation multilayer or one layer 
+multilayer_sedim=n
+#coupled model with ORCH
+#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
+CoupOrchInca=y
+#active or not chemistry flux in output 
+calcul_flux=n
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=2
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1 - 2) (no interpolation / point to point interpolation / Sheng & Zwiers interpolation) 
+#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc / sflx_SZ.nc ) 
+emi_interp_time=1
+#activate the flag cmip_xml if you are running a CMIP experiment
+cmip_xml=y
+
+
+# Use XIOS and/or IOIPSL as output library
+XIOS=y
+IOIPSL=n
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List= (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_inca.xml, .)
+
+
+ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/Historical/v1/ANT/sflx_lmdz_ANT_1850_phy.nc	,   sflx_ANT.nc         ),\
+     	    (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/Historical/v1/BBG/sflx_lmdz_BBG_1850_phy.nc	,   sflx_BBG.nc         ),\
+     	    (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/Historical/v1/aircraft_1850_phy.nc		,   aircraft_mth.nc     ),\
+     	    (${R_IN}/CHM/IPCC_AR6/SAD/${RESOL_CHM_XY}/sad_cmip6_1850.nc					,   sad.nc		),\
+	    (${R_IN}/CHM/INCA${RESOL_CHM}/npp.nc							,   npp.nc		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/o3coeff_lmdz_phy.nc		  			,   o3lin.nc		)\
+            (${R_IN}/CHM/IPCC_AR6/LGLIVED/lglived-piControl.dat			  			,   lglived.dat	   	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/STRAT/hikari_sc0_lmdz_phy.nc		  			,   aircraft_hs.nc	)\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/Historical/v1/sflx_lmdz_GHG.nc	  	,   sflx_GHG.nc	   	)\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/Historical/v1/sflx_lmdz_MISC.nc	  	,   sflx_MISC.nc	)\
+            (${R_IN}/CHM/IPCC_AR6/SFLX/VERS2/${RESOL_CHM}/Historical/v1/sflx_lmdz_NATnobio.nc	  	,   sflx_noBioNAT.nc	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/landuse.nc				  			,   landuse.nc	   	)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/rhvEC.txt				  			,   rhvEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wthEC.txt				  			,   wthEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/clyEC.txt				  			,   clyEC.txt		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/wth.dat				  			,   wth.dat		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/cly.dat				  			,   cly.dat		)\
+            (${R_IN}/CHM/INCA${RESOL_CHM}/rhv.dat				  			,   rhv.dat		)\
+ 	    (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat			  			,   phototable.dat	)
+
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/inca.def, .),\
+        (${SUBMIT_DIR}/PARAM/ping_inca.xml, .), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca_CM5A2.xml, field_def_inca.xml) ,\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ),\
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_daily_CM5A2.xml, file_def_inca_daily.xml), \
+	(${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC_AER_monthly_CM5A2.xml, file_def_inca_monthly.xml), \
+    	(${MODIPSL}/bin/inca.dat, inca.dat)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (reprecipinsoil.dat, precipinsoil.dat, precipinsoil.dat),\
+      (chem_restart.nc, chem_restart.nc, chem_start.nc) 
+
+
+[OutputText]
+List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca_daily.xml,file_def_inca_monthly.xml, inca_IDxml.out)
+
+[OutputFiles]
+List=	(inca1h_aero_chem.nc    ,      ${R_OUT_CHM_O_H}/${PREFIX}_1H_inca_aero_chem.nc  ,  NONE                  ),\
+	(inca1d_emi.nc     	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     	,  NONE                  ),\
+	(inca1d_species.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc 	,  Post_1D_inca_species  ),\
+	(inca1d_dep.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc    	,  NONE                  ),\
+	(inca1d_chem.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    	,  Post_1D_inca_chem     ),\
+	(inca1d_aero.nc    	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_aero.nc    	,  Post_1D_inca_aero     ),\
+	(inca1d_phtrate.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1d_reacflux.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc	,  NONE                  ),\
+	(inca1d_washrate.nc	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc	,  NONE                  ),\
+	(inca1d_forcage.nc 	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_forcage.nc 	,  Post_1D_inca_forcage  ),\
+	(inca1d_veget.nc   	,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_veget.nc   	,  Post_1D_inca_veget    ),\
+	(inca1m_emi.nc     	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     	,  NONE                  ),\
+	(inca1m_species.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc 	,  NONE                  ),\
+	(inca1m_dep.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc    	,  NONE                  ),\
+	(inca1m_chem.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    	,  NONE                  ),\
+	(inca1m_aero.nc    	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_aero.nc    	,  NONE                  ),\
+	(inca1m_phtrate.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_phtrate.nc 	,  NONE  		 ),\
+	(inca1m_reacflux.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc	,  NONE                  ),\
+	(inca1m_washrate.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc	,  NONE                  ),\
+	(inca1m_forcage.nc 	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_forcage.nc 	,  NONE                  ),\
+	(inca1m_veget.nc   	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_veget.nc   	,  NONE                  ),\
+	(aerosols_from_inca.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_aerosols_from_inca.nc,  NONE			 ),\
+	(inca_oxydants.nc	,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc	,  NONE                  ) 
+
+
+
+[Post_1D_inca_aero]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (od550bcas,od550oaas, od550ssas,od550ssss, od550dustci,od550no3ci,od550no3cs,od550bcai,od550oaai, od550sscs, od550nh4as,od550no3as, loaddustci, loadno3ci, loadbcai, loadoaai, loadsscs, loadso4cs, loadno3cs, loadssas, loadbcas, loadoaas, loadso4as, loadnh4as, loadno3as, loadssss,od550ASARp1a,od550ASARp2a,od550ASAPp1a,od550ASAPp2a,loadASARp1a,loadASARp2a,loadASAPp1a,loadASAPp2a)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_species]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmro3,vmrco, vmrch4, vmrno2,vmrno,mmrdms, mmrssss, mmrbcai, mmrdustci,mmrssas,mmrsscs,mmrno3as,mmrno3cs,mmrno3ci,mmrASARp1a,mmrASARp2a,mmrASAPp1a,mmrASAPp2a,mmrbcas,mmroaas,mmroaai)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+
+[Post_1D_inca_chem]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
+TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, coloh, colso2,colo3tot)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_forcage]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_inca_veget]
+Patches= ()
+GatherWithInternal = (lon, lat, veget, time_counter)
+TimeSeriesVars2D = (hdry,snowfromOrch,emiBio_iso,emiBio_mono,totflx_iso,totflx_mono,totflx_ORVOC,totflx_acetal,totflx_methanol)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/lim2.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/lim2.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/lim2.card	(revision 5893)
@@ -0,0 +1,51 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_ice_lim2_ref, namelist_ice_ref), \
+        (${SUBMIT_DIR}/PARAM/field_def_nemo-lim2.xml, field_def_nemo-lim.xml), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-lim2.xml, file_def_nemo-lim.xml), \
+        (${SUBMIT_DIR}/PARAM/namelist_lim2_${RESOL_OCE}_cfg, namelist_ice_cfg)
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_ice.nc, restart_icemod.nc, restart_ice_in.nc)
+
+[OutputText]
+List=   (namelist_ice)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1m_icemod.nc, ${R_OUT_ICE_O_M}/${PREFIX}_1M_icemod.nc, Post_1M_icemod ), \
+        (${config_UserChoices_JobName}_1d_icemod.nc, ${R_OUT_ICE_O_D}/${PREFIX}_1D_icemod.nc, NONE )
+
+[Post_1M_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bounds)
+TimeSeriesVars2D = (ice_pres, tsice, iicethic, isnowthi)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_icemod]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bounds)
+TimeSeriesVars2D = (iicethic, iicevelu, iicevelv, ileadfra)
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/lmdz.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/lmdz.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/lmdz.card	(revision 5893)
@@ -0,0 +1,219 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for new physics, to be used with LMDZ5/trunk revision 1554 or later
+#LMDZ_Physics=AP
+LMDZ_Physics=AP
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=preind
+
+# Set pmagic in config.def
+pmagic=0.0
+
+# manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=y
+chemistry_couple=y
+read_climoz=0
+ok_cdnc=y
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=y
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+[InitialStateFiles]
+List=  ()
+
+[BoundaryFiles]
+List=   (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_LMDZ.xml, dr2xml_lmdz.xml)
+# With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM)
+# With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations)
+ListNonDel= (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_piControl_ave_6bands_366days.nc, solarforcing.nc),\
+        (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc),\
+	    (${R_IN}/ATM/STRATAERO/AOD_STRAT/volc1850.nc, volcanoes.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY},    gcm.def),          \
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt,   .),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt,  .),          \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+	    (${SUBMIT_DIR}/PARAM/traceur.def_h2o_${LMDZ_Physics}, traceur.def), \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml),                 \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),             \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),             \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),             \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),             \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),                 \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .),              \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ),              \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    Post_1M_histmthNMC),    \
+        (paramLMDZ_phy.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_paramLMDZ_phy.nc, Post_1M_paramLMDZ_phy), \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_paramLMDZ_phy]
+Patches=()
+GatherWithInternal = (lon, lat, time_counter, time_counter_bnds)
+TimeSeriesVars2D =(R_ecc,  R_peri, R_incl, solaire, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/oasis.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/oasis.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/oasis.card	(revision 5893)
@@ -0,0 +1,136 @@
+[Compatibility] 
+libIGCM=1.0 
+ 	 
+[UserChoices]
+OutputMode=n
+FreqCoupling=86400
+Lucia=n
+
+[InitialStateFiles]
+List=	(${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/flxat.nc, flxat.nc), \
+        (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/sstoc.nc, sstoc.nc)
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/grids_v3.nc, grids.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/masks_v3.nc, masks.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/areas_v3.nc, areas.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_torc_to_tlmd_MOSAIC_v3.nc, rmp_torc_to_tlmd_MOSAIC.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_v3.nc, rmp_tlmd_to_torc_MOSAIC.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_calvin_v3.nc, rmp_tlmd_to_torc_MOSAIC_calvin.nc),\
+	    (${R_IN}/CPL/IPSLCM6/${config_UserChoices_ORCA_version}x${RESOL_ATM}/rmp_tlmd_to_torc_MOSAIC_rivflu_v3.nc, rmp_tlmd_to_torc_MOSAIC_rivflu.nc)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namcouple_${RESOL_CPL}, namcouple)
+
+[RestartFiles]
+List=	(flxat.nc, flxat.nc, flxat.nc),\
+	(sstoc.nc, sstoc.nc, sstoc.nc)
+
+[OutputText]
+List=   (namcouple, nout.000000, lucia, oasis_balance.eps)
+
+[OutputFiles]
+List=   (SISUTESW_LMDZ_01.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SISUTESW.nc,    Post_ncks_cdo),\
+    (SIICECOV_LMDZ_02.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICECOV.nc,    Post_ncks_cdo),\
+    (SIICTEMW_LMDZ_03.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICTEMW.nc,    Post_ncks_cdo),\
+    (SIICEALW_LMDZ_04.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICEALW.nc,    Post_ncks_cdo),\
+    (CURRENTX_LMDZ_05.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTX.nc,    Post_ncks_cdo),\
+    (CURRENTY_LMDZ_06.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTY.nc,    Post_ncks_cdo),\
+    (CURRENTZ_LMDZ_07.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTZ.nc,    Post_ncks_cdo),\
+    (COTAUXXU_LMDZ_08.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXU.nc,    Post_ncks_cdo),\
+    (COTAUYYU_LMDZ_09.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYU.nc,    Post_ncks_cdo),\
+    (COTAUZZU_LMDZ_10.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZU.nc,    Post_ncks_cdo),\
+    (COTAUXXV_LMDZ_11.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXV.nc,    Post_ncks_cdo),\
+    (COTAUYYV_LMDZ_12.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYV.nc,    Post_ncks_cdo),\
+    (COTAUZZV_LMDZ_13.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZV.nc,    Post_ncks_cdo),\
+    (COWINDSP_LMDZ_14.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COWINDSP.nc,    Post_ncks_cdo),\
+    (COTOTRAI_LMDZ_15.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTRAI.nc,    Post_ncks_cdo),\
+    (COTOTSNO_LMDZ_16.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTSNO.nc,    Post_ncks_cdo),\
+    (COTOTEVA_LMDZ_17.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTEVA.nc,    Post_ncks_cdo),\
+    (COICEVAP_LMDZ_18.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COICEVAP.nc,    Post_ncks_cdo),\
+    (COQSRMIX_LMDZ_19.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQSRMIX.nc,    Post_ncks_cdo),\
+    (COQNSMIX_LMDZ_20.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQNSMIX.nc,    Post_ncks_cdo),\
+    (COSHFICE_LMDZ_21.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COSHFICE.nc,    Post_ncks_cdo),\
+    (CONSFICE_LMDZ_22.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CONSFICE.nc,    Post_ncks_cdo),\
+    (CODFLXDT_LMDZ_23.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CODFLXDT.nc,    Post_ncks_cdo),\
+    (COCALVIN_LMDZ_24.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COCALVIN.nc,    Post_ncks_cdo),\
+    (COLIQRUN_LMDZ_25.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COLIQRUN.nc,    Post_ncks_cdo),\
+    (O_SSTSST_oceanx_01.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_SSTSST.nc,    Post_ncks_cdo),\
+    (OIceFrc_oceanx_02.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceFrac.nc,    Post_ncks_cdo),\
+    (O_TepIce_oceanx_03.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_TepIce.nc,    Post_ncks_cdo),\
+    (O_AlbIce_oceanx_04.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_AlbIce.nc,    Post_ncks_cdo),\
+    (O_OCurx1_oceanx_05.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurx1.nc,    Post_ncks_cdo),\
+    (O_OCury1_oceanx_06.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCury1.nc,    Post_ncks_cdo),\
+    (O_OCurz1_oceanx_07.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurz1.nc,    Post_ncks_cdo),\
+    (O_OTaux1_oceanx_08.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux1.nc,    Post_ncks_cdo),\
+    (O_OTauy1_oceanx_09.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy1.nc,    Post_ncks_cdo),\
+    (O_OTauz1_oceanx_10.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz1.nc,    Post_ncks_cdo),\
+    (O_OTaux2_oceanx_11.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux2.nc,    Post_ncks_cdo),\
+    (O_OTauy2_oceanx_12.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy2.nc,    Post_ncks_cdo),\
+    (O_OTauz2_oceanx_13.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz2.nc,    Post_ncks_cdo),\
+    (O_Wind10_oceanx_14.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Wind10.nc,    Post_ncks_cdo),\
+    (OTotRain_oceanx_15.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotRain.nc,    Post_ncks_cdo),\
+    (OTotSnow_oceanx_16.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotSnow.nc,    Post_ncks_cdo),\
+    (OTotEvap_oceanx_17.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotEvap.nc,    Post_ncks_cdo),\
+    (OIceEvap_oceanx_18.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceEvap.nc,    Post_ncks_cdo),\
+    (O_QsrMix_oceanx_19.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrMix.nc,    Post_ncks_cdo),\
+    (O_QnsMix_oceanx_20.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsMix.nc,    Post_ncks_cdo),\
+    (O_QsrIce_oceanx_21.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrIce.nc,    Post_ncks_cdo),\
+    (O_QnsIce_oceanx_22.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsIce.nc,    Post_ncks_cdo),\
+    (O_dQnsdT_oceanx_23.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_dQnsdT.nc,    Post_ncks_cdo),\
+    (OCalving_oceanx_24.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OCalving.nc,    Post_ncks_cdo),\
+    (O_Runoff_oceanx_25.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Runoff.nc,    Post_ncks_cdo),\
+    (TEMPO_1D_cpl_atm.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_atm.nc , Post_1D_cpl_atm), \
+    (TEMPO_1D_cpl_oce.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_oce.nc , Post_1D_cpl_oce), \
+    (TEMPO_1M_cpl_atm.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_atm.nc , Post_1M_cpl_atm), \
+    (TEMPO_1M_cpl_oce.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_oce.nc , Post_1M_cpl_oce)
+
+[Post_ncks_cdo]
+Patches = (Patch_20140801_ncks_cdo)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (SIICEALW, SIICECOV, SISUTESW, COCALVIN, COICEVAP, COLIQRUN, CONSFICE, COQNSMIX, COQSRMIX, COSHFICE, COTOTEVA, COTOTRAI, COTOTSNO)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (OCalving, OIceEvap, OIceFrac, OTotEvap, OTotRain, OTotSnow, O_AlbIce, O_QnsIce, O_QnsMix, O_QsrIce, O_QsrMix, O_Runoff)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/opa9.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/opa9.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/opa9.card	(revision 5893)
@@ -0,0 +1,215 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+ORCA_version=${config_UserChoices_ORCA_version:-ORCA2.3}
+mesh_mask= n
+Reproducibility_after_restart= y
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=   (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_nemo.xml, dr2xml_opa9.xml)
+ListNonDel= (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/coordinates.nc                          , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/bathy_meter.nc                          , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/ahmcoef.nc                              , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/runoffs_ORCA2_depths.nc                 , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_1m_potential_temperature_nomask.nc , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/geothermal_heating.nc                   , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_1m_salinity_nomask.nc              , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/sss_data.nc                             , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/sst_data.nc                             , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/chlorophyll_surface.nc                  , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/K1rowdrg.nc                             , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/M2rowdrg.nc                             , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/mask_itf.nc                             , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/sali_ref_clim_monthly.nc                , .), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/subbasins.nc                            , .)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_ref  , namelist_ref        ), \
+        (${SUBMIT_DIR}/PARAM/ping_nemo.xml, .), \
+        (${SUBMIT_DIR}/PARAM/field_def_nemo-opa.xml , field_def_nemo-opa.xml  ), \
+        (${SUBMIT_DIR}/PARAM/domain_def_nemo.xml, domain_def_nemo.xml ), \
+        (${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE}_cfg          , namelist_cfg        ), \
+        (${SUBMIT_DIR}/PARAM/context_nemo.xml                   , context_nemo.xml    ), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-opa.xml                  , file_def_nemo-opa.xml   )
+
+   
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart.nc,  restart.nc, restartopa.nc)
+
+[OutputText]
+List=   (ocean.output, solver.stat, namelist, output.namelist.*, context_nemo.xml, field_def_nemo.xml, domain_def_nemo.xml, out_opa.xx.out, out_opa.xx.err)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1y_scalar.nc, ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_scalar.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_T.nc, ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_T.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_U.nc, ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_U.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_V.nc, ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_V.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_grid_W.nc, ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1y_diaptr.nc, ${R_OUT_OCE_O_Y}/${PREFIX}_1Y_diaptr.nc     , Post_1Y_diaptr),\
+        (${config_UserChoices_JobName}_1m_scalar.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_scalar.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1m_grid_T.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_T.nc     , Post_1M_grid_T),\
+        (${config_UserChoices_JobName}_1m_grid_U.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_U.nc     , Post_1M_grid_U),\
+        (${config_UserChoices_JobName}_1m_grid_V.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_V.nc     , Post_1M_grid_V),\
+        (${config_UserChoices_JobName}_1m_grid_W.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_W.nc     , Post_1M_grid_W),\
+        (${config_UserChoices_JobName}_1m_diaptr.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_diaptr.nc     , Post_1M_diaptr),\
+        (${config_UserChoices_JobName}_1d_grid_T.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_T.nc     , Post_1D_grid_T),\
+        (${config_UserChoices_JobName}_1d_grid_U.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_U.nc     , Post_1D_grid_U),\
+        (${config_UserChoices_JobName}_1d_grid_W.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_W.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_SBC.nc   , ${R_OUT_OCE_O_D}/${PREFIX}_1D_SBC.nc        , NONE          ),\
+        (${config_UserChoices_JobName}_1d_diaptr.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_diaptr.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_scalar.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_scalar.nc     , NONE          ),\
+        (${config_UserChoices_JobName}_1d_SBC_scalar, ${R_OUT_OCE_O_D}/${PREFIX}_1D_SBC_scalar.nc, NONE          ),\
+        (mesh_mask.nc     , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_mesh_mask.nc                       , NONE),\
+        (runoffs.nc       , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_runoffs.nc                         , NONE),\
+	(damping.coeff.nc , ${R_OUT_OCE_O_D}/${PREFIX}_damping.coeff.nc                                     , NONE),\
+        (output.abort.nc  , ${R_OUT_OCE_D}/${PREFIX}_output.abort.nc                                        , NONE),\
+        (output.init.nc   , ${R_OUT_OCE_O_I}/${config_UserChoices_JobName}_${PeriodDateBegin}_output.init.nc, NONE)
+
+# Monthly analysis
+
+[Post_1M_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_centered, time_centered_bounds, time_counter)
+TimeSeriesVars2D = (masso, volo, zosga, zossga, zostoga, thetaoga, soga)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zos, zossq, tos, sos, tossq, omlmax, mldkz5, mldr10_1, nshfls, rsntds, rsds, friver, hc300, wfo)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (e3t, thetao, so)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthu, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (tauuo, sozohetr, sozosatr)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (e3u, uo)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthv, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (tauvo, somehetr, somesatr)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (e3v, vo)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_grid_W]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthw, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_diaptr]
+Patches = ()
+GatherWithInternal = (nav_lat, deptht, depthw, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zomsfglo, zomsfatl, zomsfpac, zomsfind, zomsfipc, zotemglo, zotematl, zotempac, zotemind, zotemipc, zosalglo, zosalatl, zosalpac, zosalind, zosalipc, zosrfglo, zosrfatl, zosrfpac, zosrfind, zosrfipc, sophtadv, sophtldf, sopstadv, sopstldf)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+# Daily analysis
+
+[Post_1D_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (tos, tosstd, sos, zos, zosstd, sstdcy, mldr10_1, mldr10_1dcy, mldkz5)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthu, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 100Y
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthv, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+## Yearly analysis
+
+[Post_1Y_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (masso, volo, zosga, zossga, zostoga, thetaoga, soga)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_grid_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = (thetao, so)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_U]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthu, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (hfx, hfxba, hfxdiff, sozotaux)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (umo, vozocrtx,vozoeivu)
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_V]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthv, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_grid_W]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, depthw, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ( )
+ChunckJob2D = NONE
+TimeSeriesVars3D = ( )
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1Y_diaptr]
+Patches = ()
+GatherWithInternal = (nav_lat, deptht, depthw, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (zomsfglo, zomsfatl, zotemglo, zotematl, zotempac, zosalglo, zosalatl, zosalpac, zosrfglo, zosrfatl, zosrfpac)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/orchidee.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/orchidee.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/orchidee.card	(revision 5893)
@@ -0,0 +1,65 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=Choi
+
+VEGET_UPDATE=0Y
+CHEMISTRY_BVOC=y
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc,        . ), \
+	(${R_IN}/SRF/routing.nc,            . ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_orchidee.xml, .)
+List= ()
+ListNonDel= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/13PFT.v2/PFTmap13_1850.nc, PFTmap.nc), \
+	    (${R_IN}/SRF/chemistry/orchidee_fertilizer_1995.nc, .), \
+            (${R_IN}/SRF/chemistry/orchidee_bbg_clim.nc, .)
+
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+        (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, .),\
+        (${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	    (${R_IN}/SRF/routing.nc,            . ), \
+	    (${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+    	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, riverflow, coastalflow)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/pisces.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/pisces.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/pisces.card	(revision 5893)
@@ -0,0 +1,108 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+DBIO_ENABLE=y
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+List=	()
+
+ListNonDel= (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_DIC_nomask.nc     , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_Alkalini_nomask.nc, . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_O2_nomask.nc      , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_NO3_nomask.nc     , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_PO4_nomask.nc     , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_Si_nomask.nc      , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_DOC_nomask.nc     , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/data_Fer_nomask.nc     , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/dust.orca.nc           , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/bathy.orca_v1.nc       , bathy.orca.nc), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/river.orca.nc          , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/ndeposition.orca.nc    , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/par.orca.nc            , . ), \
+            (${R_IN}/OCE/IPSLCM6/${opa9_UserChoices_ORCA_version}/solubility.orca.nc    , . )
+
+[SmoothFiles]
+List=  ()
+
+[ParametersFiles]
+List=	(${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_top_ref   , namelist_top_ref), \
+     	(${SUBMIT_DIR}/PARAM/namelist_top_${RESOL_OCE}_cfg           , namelist_top_cfg), \
+        (${MODIPSL}/modeles/NEMOGCM/CONFIG/SHARED/namelist_pisces_ref, namelist_pisces_ref), \
+        (${SUBMIT_DIR}/PARAM/namelist_pisces_${RESOL_OCE}_cfg        , namelist_pisces_cfg), \
+        (${SUBMIT_DIR}/PARAM/file_def_nemo-pisces.xml                  , file_def_nemo-pisces.xml   ), \
+        (${SUBMIT_DIR}/PARAM/field_def_nemo-pisces.xml                  , field_def_nemo-pisces.xml   )
+        
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_trc.nc,  restart_trc.nc, restart_trc.nc)
+
+[OutputText]
+List=   (namelist_top_ref, namelist_cfg, namelist_pisces_ref, namelist_pisces_cfg)
+
+[OutputFiles]
+List=   (${config_UserChoices_JobName}_1y_ptrc_T.nc        , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_ptrc_T.nc    , Post_1Y_ptrc_T   ) , \
+        (${config_UserChoices_JobName}_1y_diad_T.nc        , ${R_OUT_MBG_O_Y}/${PREFIX}_1Y_diad_T.nc    , Post_1Y_diad_T   ) , \
+	(${config_UserChoices_JobName}_1m_bioscalar.nc     , ${R_OUT_MBG_O_M}/${PREFIX}_1M_bioscalar.nc , Post_1M_bioscalar) , \
+        (${config_UserChoices_JobName}_1m_ptrc_T.nc        , ${R_OUT_MBG_O_M}/${PREFIX}_1M_ptrc_T.nc    , Post_1M_ptrc_T   ) , \
+        (${config_UserChoices_JobName}_1m_diad_T.nc        , ${R_OUT_MBG_O_M}/${PREFIX}_1M_diad_T.nc    , Post_1M_diad_T   ) , \
+	(${config_UserChoices_JobName}_1d_bioscalar.nc     , ${R_OUT_MBG_O_M}/${PREFIX}_1D_bioscalar.nc , Post_1D_bioscalar)
+
+
+
+[Post_1D_bioscalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_instant, time_instant_bounds)
+TimeSeriesVars2D = (pno3tot, ppo4tot, psiltot, palktot, pfertot, tcflx, tcflxcum, tcexp, tintpp, tnfix, tdenit)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1M_bioscalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_instant, time_instant_bounds)
+TimeSeriesVars2D = (pno3tot, ppo4tot, psiltot, palktot, pfertot, tcflx, tcflxcum, tcexp, tintpp, tnfix, tdenit)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = 50Y
+Seasonal=OFF
+
+[Post_1M_ptrc_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (Alkalini, NCHL, DCHL, DIC, Fer, NO3, O2, PO4, Si)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_diad_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (Cflx, Dpco2, EPC100, INTPP)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (TPP)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1Y_ptrc_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Alkalini, NCHL, DCHL, DIC, Fer, NO3, O2, PO4, Si )
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1Y_diad_T]
+Patches = ()
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (Cflx, Dpco2, EPC100, Heup,  Nfix)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (PAR, TPP)
+ChunckJob3D = 50Y
+Seasonal=OFF
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/stomate.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/stomate.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/stomate.card	(revision 5893)
@@ -0,0 +1,46 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, CONTFRAC, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/xios.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/xios.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/COMP/xios.card	(revision 5893)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=  (xios_registry.bin, xios_registry.bin, xios_registry.bin)
+
+[OutputText]
+List=   (out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/inca.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/inca.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/inca.driver	(revision 5893)
@@ -0,0 +1,356 @@
+#!/bin/ksh
+
+#D- Driver du script pour INCA
+#-----------------------------------------------------------------
+function INCA_sed_replace
+{
+    IGCM_debug_PushStack "INCA_sed_replace"
+
+    sed -e "s/${2}/${3}/" ${1} > ${1}.tmp
+    RET=$?
+    echo "INCA_sed : ${1} ${2} ${3}"
+    \mv ${1}.tmp ${1}
+
+    IGCM_debug_PopStack "INCA_sed_replace"
+    return $RET
+}
+#-----------------------------------------------------------------
+function CHM_Initialize
+{
+    IGCM_debug_PushStack "CHM_Initialize"
+
+    RESOL_CHM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-FD" '{print $2}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
+    RESOL_CHM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' | awk "-F-" '{print $1}')
+    RESOL_CHM_XY=$( echo ${RESOL_CHM} | awk "-F-" '{print $1}' )
+    echo 'resol chimie : ' $RESOL_CHM', resol lonlat : ' ${RESOL_CHM_XY}
+
+
+    [ -f ${SUBMIT_DIR}/../.chimie ] && eval $(grep CHEM ${SUBMIT_DIR}/../.chimie) 
+    INCA_sed_replace ${SUBMIT_DIR}/config.card \${CHEM} ${CHEM}
+    echo "INCA Tag : LMDZ-INCA" ${config_UserChoices_TagName}
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+    enable1=.FALSE.
+    enable2=.FALSE.
+    enable3=.FALSE. 
+
+    for frequency in ${config_CHM_WriteFrequency} ; do
+	case ${frequency} in 
+	    1D|1d) enable1=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    1M|1m) enable2=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    1H|1h) enable3=.TRUE. ;; 
+	esac
+    done
+
+
+
+    IGCM_debug_PopStack "CHM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function CHM_Update
+{
+    IGCM_debug_PushStack "CHM_Update"
+
+    case ${CHEM} in 
+	AER)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   forcage1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml forcage2     enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   aero1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml aero2        enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   chemistry1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml chemistry2   enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   emissions1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml emissions2   enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   species1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml species2     enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   dvel1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml dvel2        enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   washout1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml washout2     enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   reacflux1    enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml reacflux2    enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml   invariants1  enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml invariants2  enabled ${enable2}
+
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+	DUSS)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml forcage1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml aero1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml emissions1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml species1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml vegetation1  enabled ${enable1}
+
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml forcage2     enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml aero2        enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml emissions2   enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml species2     enabled ${enable2}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml vegetation2  enabled ${enable2}
+
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+	NMHC) 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml reacflux1    enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml emissions1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml species1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml chemistry1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml dvel1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml washout1     enabled ${enable1}
+
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml reacflux2  enabled ${enable2}  
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml emissions2 enabled ${enable2}  
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml species2   enabled ${enable2}  
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml chemistry2 enabled ${enable2}  
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml dvel2      enabled ${enable2}  
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml washout2   enabled ${enable2}  
+
+	    IGCM_comp_modifyDefFile nonblocker run.def config_inca chem
+	    ;;
+	NMHC_AER)
+
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml forcage1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml aero1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml species1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml chemistry1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml emissions1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml dvel1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml phtrate1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml washout1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml reacflux1    enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml vegetation1  enabled ${enable1}
+
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml forcage2    enabled ${enable2}  
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml aero2       enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml species2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml chemistry2  enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml emissions2  enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml dvel2       enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml phtrate2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml washout2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml reacflux2   enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml vegetation2 enabled ${enable2} 
+
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+
+	NMHC_AER_S)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml aero_chem1  enabled ${enable3}
+
+ 	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml forcage1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml aero1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml species1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml chemistry1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml emissions1   enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml dvel1        enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml phtrate1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml washout1     enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml reacflux1    enabled ${enable1}
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml vegetation1  enabled ${enable1}
+
+ 	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml forcage2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml aero2       enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml species2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml chemistry2  enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml emissions2  enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml phtrate2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml dvel2       enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml washout2    enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml reacflux2   enabled ${enable2} 
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml vegetation2 enabled ${enable2}  
+
+	    if [ X${LMDZ_Physics} = X"AP" ] ; then
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aero
+	    else
+		IGCM_comp_modifyDefFile nonblocker run.def config_inca aeNP
+	    fi
+	;;
+	GES)
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_daily.xml emissions1    enabled ${enable1}
+
+	    IGCM_comp_modifyXmlFile nonblocker file_def_inca_monthly.xml emissions2    enabled ${enable2}
+
+	    IGCM_comp_modifyDefFile nonblocker run.def config_inca chem
+	esac
+
+
+    # inca.def : Activate reading of 10m wind in files if LMDZ_10m_winds=n in inca.card
+    if [ ! X${inca_UserChoices_LMDZ_10m_winds} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def LMDZ_10m_winds  ${inca_UserChoices_LMDZ_10m_winds}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def LMDZ_10m_winds  n
+    fi
+
+    if [  X${inca_UserChoices_10m_winds_method} = X ] ; then
+    IGCM_comp_modifyDefFile nonblocker inca.def  10m_winds_method  threshold
+    else
+    IGCM_comp_modifyDefFile nonblocker inca.def  10m_winds_method ${inca_UserChoices_10m_winds_method}
+    fi
+
+
+    if [ ! X${inca_UserChoices_wind_parameter} = X ] ; then 
+	if [  X${inca_UserChoices_10m_winds_method} = Xthreshold ] ; then 
+	    IGCM_comp_modifyDefFile nonblocker inca.def  tref ${inca_UserChoices_wind_parameter}
+	    IGCM_comp_modifyDefFile nonblocker inca.def  kref DEFAULT
+	else
+	    IGCM_comp_modifyDefFile nonblocker inca.def  kref ${inca_UserChoices_wind_parameter}
+	    IGCM_comp_modifyDefFile nonblocker inca.def  tref DEFAULT
+	fi
+    else
+	    IGCM_comp_modifyDefFile nonblocker inca.def  kref DEFAULT
+	    IGCM_comp_modifyDefFile nonblocker inca.def  tref DEFAULT
+    fi
+
+    if [  X${inca_UserChoices_seasalt_corr} = X ] ; then
+    IGCM_comp_modifyDefFile nonblocker inca.def  ss_corr  DEFAULT
+    else
+    IGCM_comp_modifyDefFile nonblocker inca.def  ss_corr ${inca_UserChoices_seasalt_corr}
+    fi
+
+
+
+    # inca.def : choose write frequency for inca_avgr in inca.card
+    if [ ! X${inca_UserChoices_freq_write_chem} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def freq_write_chem  ${inca_UserChoices_freq_write_chem}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  freq_write_chem  86400
+    fi
+
+    #inca.def : choose aerosol effect with feedback variable
+    if [ ! X${inca_UserChoices_feedb} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def  feedb  ${inca_UserChoices_feedb}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def feedb  0
+    fi
+    
+    #inca.def : choose coupled model with orchidee  
+    if [ ! X${inca_UserChoices_CoupOrchInca} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def CoupOrchInca ${inca_UserChoices_CoupOrchInca}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def CoupOrchInca n
+    fi
+
+    #inca.def : choose sedimentation schema 
+    if [ ! X${inca_UserChoices_multilayer_sedim} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def multilayer_sediment ${inca_UserChoices_multilayer_sedim}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def multilayer_sediment y
+    fi
+
+    #inca.def : choose calcul interactif des diagnostiques flux chimique ou non  
+    if [ ! X${inca_UserChoices_calcul_flux} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def calcul_flux ${inca_UserChoices_calcul_flux}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def calcul_flux n
+    fi
+
+    #inca.def : choose aircraft emission 
+    if [ ! X${inca_UserChoices_flag_plane} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def flag_plane ${inca_UserChoices_flag_plane}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def flag_plane 0
+    fi
+    
+    #inca.def : choose time interpolation for sflx.nc
+    if [ ! X${inca_UserChoices_emi_interp_time} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker inca.def emi_interp_time ${inca_UserChoices_emi_interp_time}
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def emi_interp_time 1
+    fi
+
+    #inca.def : choose output library 
+    if [  X${inca_UserChoices_XIOS} = Xy ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def  XIOS_INCA_OK  y
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  XIOS_INCA_OK n
+    fi
+
+    if [  X${inca_UserChoices_IOIPSL} = Xy ] ; then
+	IGCM_comp_modifyDefFile nonblocker inca.def  IOIPSL_INCA_OK  y
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  IOIPSL_INCA_OK n
+    fi
+
+    #inca.def : choose which xml will be use (with group or no = cmip files) 
+    if [ X${inca_UserChoices_cmip_xml} = Xy ] ; then 
+	
+	IGCM_comp_modifyDefFile nonblocker inca.def  cmip_xml  y
+    else
+	IGCM_comp_modifyDefFile nonblocker inca.def  cmip_xml  n
+    fi
+	
+    if [ X${inca_UserChoices_XIOS}  = Xy ] ; then
+    # Add include of INCA context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="inca" src="./context_inca.xml"/>
+	echo '<context id="inca" src="./context_inca.xml"/>' > add.tmp
+    # Include xml files for output configuration if running with workflow CMIP6
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+        echo '<context id="inca" src="./ping_inca.xml"/>' >> add.tmp
+        echo '<context id="inca" src="./dr2xml_inca.xml"/>' >> add.tmp
+    fi
+	cp iodef.xml iodef.xml.tmp
+	sed -e "/COMPONENT CONTEXT/r add.tmp" \
+	    iodef.xml.tmp > iodef.xml
+	rm iodef.xml.tmp add.tmp
+    fi
+
+    # Add LongName as global attribute in XIOS output files (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*inca.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done
+	rm add.tmp
+    fi
+
+    IGCM_debug_PopStack "CHM_Update"
+}
+
+#-----------------------------------------------------------------
+function CHM_Finalize
+{
+    IGCM_debug_PushStack "CHM_Finalize"
+
+    echo FINALIZE CHM !!!
+#
+#    IGCM_sys_Mkdir ${R_OUT_EXE}
+#    cd ${MODIPSL}
+#    tar cf src_${config_UserChoices_JobName}.tar  modeles
+#    IGCM_sys_Mv src_${config_UserChoices_JobName}.tar ${R_OUT_EXE}/.
+#    cd -
+#
+
+    IGCM_debug_PopStack "CHM_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/lim2.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/lim2.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/lim2.driver	(revision 5893)
@@ -0,0 +1,31 @@
+#!/bin/ksh
+
+#-----------------------------------
+function ICE_Initialize
+{ 
+    IGCM_debug_PushStack "ICE_Initialize"
+
+    echo INITIALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Initialize"
+}
+
+#-----------------------------------
+function ICE_Update
+{
+    IGCM_debug_PushStack "ICE_Update"
+
+    echo UPDATE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Update"
+}
+
+#-----------------------------------
+function ICE_Finalize
+{
+    IGCM_debug_PushStack "ICE_Finalize"
+
+    echo FINALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/lmdz.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/lmdz.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/lmdz.driver	(revision 5893)
@@ -0,0 +1,671 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function ATM_Initialize
+{
+    IGCM_debug_PushStack "ATM_Initialize"
+
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
+
+    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
+    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
+    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
+    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+    ##- Create_etat0_limit version
+    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
+    ##  This variable is only used in lmdz.card to choose input files.
+    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
+	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
+	CREATE=${lmdz_UserChoices_CREATE}
+	echo create_etat0_limit version : ${CREATE}
+    fi
+
+
+    ## - LMDZ choice of config.def file
+    ##   ConfType must be set in lmdz.card
+    ConfType=${lmdz_UserChoices_ConfType}
+
+    ##- LMDZ output level, to be set in lmdz.card
+    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
+	# OutLevel is not set. Take default value low.
+	OutLevel=low
+    else
+	OutLevel=${lmdz_UserChoices_OutLevel}
+    fi
+
+    ##-- Output frequency purpose ....
+    ##--  Initialisation  ....
+    ok_mensuel=.FALSE.
+    ok_journe=.FALSE.
+    ok_hf=.FALSE.
+    ok_hf3h=.FALSE.
+    ok_hf3hm=.FALSE.
+    ok_stn=.FALSE.
+
+    case ${config_UserChoices_PeriodLength} in
+	1Y|1y|1M|1m) ok_mensuel=.TRUE. ;;
+	5D|5d|1D|1d) ok_journe=.TRUE. ;;
+    esac
+
+    for frequency in ${config_ATM_WriteFrequency} ; do
+	case ${frequency} in
+	    1M|1m) ok_mensuel=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    5D|5d|1D|1d) ok_journe=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    HF|hf) ok_hf=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3h|hf3h) ok_hf3h=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3hm|hf3hm) ok_hf3hm=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    STN|stn) ok_stn=.TRUE. ;;
+	esac
+    done
+
+    ##  Read LMDZ_COSP_OK in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_COSP_OK} = Xy ] ; then
+	##  LMDZ_COSP_OK=y, now read all other COSP variables
+	##  Read LMDZ_COSP_monthly in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_monthly} = Xy ] ; then
+	    LMDZ_COSP_monthly=.TRUE.
+	else
+	    LMDZ_COSP_monthly=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_daily in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_daily} = Xy ] ; then
+	    LMDZ_COSP_daily=.TRUE.
+	else
+	    LMDZ_COSP_daily=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_hf in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_hf} = Xy ] ; then
+	    LMDZ_COSP_hf=.TRUE.
+	else
+	    LMDZ_COSP_hf=.FALSE.
+	fi
+    else
+	# LMDZ_COSP_OK=n : All cosp output are deactivated
+	LMDZ_COSP_monthly=.FALSE.
+	LMDZ_COSP_daily=.FALSE.
+	LMDZ_COSP_hf=.FALSE.
+    fi	
+
+    ##  Read LMDZ_NMC_monthly in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_monthly} = Xy ] ; then
+	LMDZ_NMC_monthly=.TRUE.
+    else
+	LMDZ_NMC_monthly=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_daily in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_daily} = Xy ] ; then
+	LMDZ_NMC_daily=.TRUE.
+    else
+	LMDZ_NMC_daily=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_hf in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_hf} = Xy ] ; then
+	LMDZ_NMC_hf=.TRUE.
+    else
+	LMDZ_NMC_hf=.FALSE.
+    fi
+    
+
+    IGCM_debug_PopStack "ATM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function ATM_Update
+{
+    IGCM_debug_PushStack "ATM_Update"
+
+    ##-- GHG forcing :
+    ##   If forcing file exist in run directory, read values for the current year 
+    ##   and set in config.def. If not use the default value set in config.def
+
+    # Read value for solaire from file SOLARANDVOLCANOES.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f SOLARANDVOLCANOES.txt ] ; then
+	value=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def solaire $value
+
+
+    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CO2.txt ] ; then
+       	value=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CO2.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm $value
+
+
+    # Read value for CH4_ppb from file CH4.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CH4.txt ] ; then
+	value=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CH4.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CH4_ppb $value
+
+
+    # Read value for N2O_ppb from file N2O.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f N2O.txt ] ; then
+	value=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file N2O.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def N2O_ppb $value
+
+    # Read value for CFC11_ppt from file CFC11.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC11.txt ] ; then
+	value=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC11_ppt $value
+
+
+    # Read value for CFC12_ppt from file CFC12.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC12.txt ] ; then
+	value=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC12_ppt $value
+
+
+    ## Coupling Time Step : Take value of FreqCoupling set in oasis.card or if it is not set, take default value 86400
+    LMDZ_t_coupl=${oasis_UserChoices_FreqCoupling:-86400}
+    IGCM_debug_Print 3 "LMDZ_t_coupl "   ${LMDZ_t_coupl}
+    IGCM_comp_modifyDefFile nonblocker config.def t_coupl   ${LMDZ_t_coupl} 
+
+    ##-- Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Update
+    fi
+
+
+    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate 
+    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
+    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
+	LMDZ_COSP_daily=.TRUE.
+    fi
+
+    ## Modifiy 
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${ok_mensuel}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${ok_journe}
+    
+    if [ X${OutLevel} = Xlow ] || [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 2
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 5
+    fi
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${ok_hf}
+    
+    if [ X${OutLevel} = Xlow ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 5
+    elif [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 6
+    elif [ X${OutLevel} = Xhigh ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 7
+    fi
+    	
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3h_lmdz.xml histhf3h enabled ${ok_hf3h}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3hm_lmdz.xml histhf3hm enabled ${ok_hf3hm}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${ok_stn}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${LMDZ_NMC_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${LMDZ_NMC_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${LMDZ_NMC_hf}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthCOSP_lmdz.xml histmthCOSP enabled ${LMDZ_COSP_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayCOSP_lmdz.xml histdayCOSP enabled ${LMDZ_COSP_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfCOSP_lmdz.xml histhfCOSP enabled ${LMDZ_COSP_hf}
+        
+
+    ## gcm.def parameters : 
+    # Modification of variable iphysiq depending on the physics
+    if [ X${LMDZ_Physics} = X"AP" ] ; then
+	if [ ${RESOL_ATM_3D} = 96x95x39 ]; then
+	    value=10
+	elif [ ${RESOL_ATM_3D} = 144x142x39 ]; then
+	    value=15
+	else
+	    IGCM_debug_Print 1 "LMDZ_Physics=${LMDZ_Physics} has not been tested for the current resolution RESOL_ATM_3D=${RESOL_ATM_3D}. "
+	    IGCM_debug_Print 1 "iphysiq must be defined for the current combination of resolution and phyiscs package"
+	    IGCM_debug_Exit "You need to add a special case in lmdz.driver to handle the above combination."
+	fi
+    elif [ X${LMDZ_Physics} = X"NPv3.1" ] ; then
+	if  [ ${RESOL_ATM_3D} = 96x95x39 ] ; then
+	    value=5
+	elif [ ${RESOL_ATM_3D} = 144x142x39 ] ; then
+	    value=5
+	else
+	    IGCM_debug_Print 1 "LMDZ_Physics=${LMDZ_Physics} has not been tested for the current resolution RESOL_ATM_3D=${RESOL_ATM_3D}. "
+	    IGCM_debug_Print 1 "iphysiq must be defined for the current combination of resolution and phyiscs package"
+	    IGCM_debug_Exit "You need to add a special case in lmdz.driver to handle the above combination."
+	fi
+    elif [ X${LMDZ_Physics} = X"NPv3.2" ] ; then
+	if [ ${RESOL_ATM_3D} = 96x95x39 ] ; then
+	    value=5
+	elif [ ${RESOL_ATM_3D} = 144x142x39 ] ; then
+	    value=5
+	elif [ ${RESOL_ATM_3D} = 128x118x39 ] ; then
+	    value=15
+	else
+	    IGCM_debug_Print 1 "LMDZ_Physics=${LMDZ_Physics} has not been tested for the current resolution RESOL_ATM_3D=${RESOL_ATM_3D}. "
+	    IGCM_debug_Print 1 "iphysiq must be defined for the current combination of resolution and phyiscs package"
+	    IGCM_debug_Exit "You need to add a special case in lmdz.driver to handle the above combination."
+	fi
+    else
+	# Take default value set in gcm.def
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker gcm.def iphysiq $value
+    
+
+    ## run.def parameters
+
+
+    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	IGCM_comp_modifyDefFile blocker run.def raz_date  1
+    else
+	IGCM_comp_modifyDefFile blocker run.def raz_date  0
+    fi
+
+    ##-- Calendar type for LMDZ and create_etat0_limit
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+	    IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;;
+        noleap)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;;
+        360d)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+        *)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+    esac
+
+    IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay}
+    IGCM_comp_modifyDefFile blocker run.def nday      ${PeriodLengthInDays}
+
+    # Set anneeref different for gcm and ce0l
+    # Test if executable create_etat0_limit is present and lmdz.x is not present
+    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
+	# for case ce0l : always take current year
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${year}
+
+        # Temporary, set use_filtre_fft=n because we now use dyn3d for ce0l version where fft is not implemented. 
+        # In more recent versions of LMDZ, this will not be needed. 
+	IGCM_comp_modifyDefFile force   run.def use_filtre_fft n
+    else
+	# for case gcm : take first year of simulation
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear}
+    fi
+
+    ## Determine from the variable ListOfComponents in config.card coupling to external models 
+    ## and set corresponding parameters in run.def
+    echo ListOfComponents now running : ${config_ListOfComponents[*]}
+
+    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
+	echo "Activate ORCHIDEE, set VEGET=y in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET y
+    else
+	echo "No ORCHIDEE, set VEGET=n in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET n
+    fi
+
+    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
+	echo "Activate coupling to ocean, set type_ocean=couple in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_ocean couple
+    else
+	echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_ocean force
+    fi
+
+    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
+	echo "Activate coupling to INCA, set type_trac=inca in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac inca
+    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
+	echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac repr
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    else
+	echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac lmdz
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    fi
+
+
+    # config.def : Activate direct radiative effect if ok_ade=y
+    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade ${lmdz_UserChoices_ok_ade}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade n
+    fi 
+
+    # config.def : Activate indirect radiative effect if ok_aie=y
+    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie ${lmdz_UserChoices_ok_aie}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie n
+    fi 
+
+    # config.def : Activate online aerosol coupled model if aerosol_couple=y
+    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple n
+    fi 
+
+    # config.def : Activate online Ozone chemistry coupled model if chemistry_couple=y
+    if [ ! X${lmdz_UserChoices_chemistry_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple ${lmdz_UserChoices_chemistry_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple n
+    fi 
+
+    # config.def : Activate reading of ozone in climatology if read_climoz=2
+    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz ${lmdz_UserChoices_read_climoz}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz 0	
+    fi 
+
+    # config.def : Choose aerosol use in radiative effect 
+    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only 
+    # =5 => dust only =6 => all aerosol    
+    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol 0
+    fi 
+
+    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
+    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc n	
+    fi 
+
+    # config.def : Activate COSP
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp ${lmdz_UserChoices_LMDZ_COSP_OK}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp n	
+    fi 
+
+    # config.def : Modify parameter pmagic if it is set in lmdz.card
+    if [ ! X${lmdz_UserChoices_pmagic} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic ${lmdz_UserChoices_pmagic}
+    else
+	# Take default value set in config.def
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic DEFAULT
+    fi 
+
+    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
+    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
+    else
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n
+    fi
+
+    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
+    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
+    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
+	awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
+	IGCM_sys_Mv gcm.def.tmp gcm.def
+	echo
+	IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
+	echo
+	cat gcm.def
+	ByPass_hgardfou_teta=n
+	IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
+    fi
+
+    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
+    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
+    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
+	sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
+        IGCM_sys_Mv gcm.def.tmp gcm.def
+        echo
+        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
+        echo
+        cat gcm.def
+        ByPass_hgardfou_mats=n
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
+    fi
+
+    # Add include of LMDZ context in iodef.xml
+    # In iodef.xml add on the next line after "COMPONENT CONTEXT"
+    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
+    # Include xml files for output configuration if running with workflow CMIP6
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+        echo '<context id="LMDZ" src="./ping_lmdz.xml"/>' >> add.tmp
+        echo '<context id="LMDZ" src="./dr2xml_lmdz.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*lmdz.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done
+	rm add.tmp
+    fi
+            
+    IGCM_debug_PopStack "ATM_Update"
+}
+
+#-----------------------------------
+function ATM_Finalize
+{
+    IGCM_debug_PushStack "ATM_Finalize"
+
+    # Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Finalize
+    fi
+
+    echo FINALIZE ATM !
+
+    IGCM_debug_PopStack "ATM_Finalize"
+}
+
+
+
+function ATM_Carbon_Update
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Update"
+
+    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
+    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    typeset PathCO2log 
+    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
+    
+    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
+        ##--Initialization of fluxes to an undefined value at the first run
+	UndefinedValueCo2=-9999
+	InitPeriodCo2=0
+	InitDateBeginCo2=${UndefinedValueCo2}
+	InitYearCo2=$(( ${year} - 1 )) 
+	InitDateEndCo2=${InitYearCo2}1231
+	fCO2_ff=${UndefinedValueCo2} 
+	CO2SBG=${UndefinedValueCo2}
+	CO2LU=${UndefinedValueCo2}
+	CO2MBG=${UndefinedValueCo2}
+	CO2_ppm_prec=${UndefinedValueCo2}
+        # Get the initial value of atmosp. pco2 
+	CO2_ppm=${lmdz_UserChoices_co2_init}
+	
+	IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+	echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	
+        # Get the path where the log file co2.log is
+	PathCO2log=${SUBMIT_DIR} 
+        # Get Previous line in co2.log
+	PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+	
+    else
+	
+	# NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
+        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
+	#SubmitRestartPath=
+	if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
+	    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
+	    PathCO2log=${config_ATM_SubmitRestartPath}
+	    Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
+	    PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
+	    
+	    IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	    IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	    
+            # Save Last Line of control in new co2.log file
+	    InitPeriodCo2=0   
+	    InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
+	    InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
+	    fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
+	    CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
+	    CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
+	    CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
+	    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	    
+	    echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+		gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	else
+           # Get restart line in co2.log
+	    PathCO2log=${SUBMIT_DIR}
+	    PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+           # Get the value of atmosp. pco2 in co2.log
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	fi
+	
+    fi
+    
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
+	# Modify co2_ppm in config.def only for historical run
+	# If not historical run, keep co2_ppm value set earlier by IGCM_comp_modifyDefFile
+	IGCM_comp_modifyDefFile force config.def co2_ppm     ${CO2_ppm}
+    fi
+    IGCM_debug_PopStack "ATM_Carbon_Update"
+}
+
+
+function ATM_Carbon_Finalize
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Finalize"
+
+    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    
+	# Fossil fuel emission
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
+            # For Control, no fossil fuel emission :
+	fCO2_ff=0
+	echo "Fossil Fuel for control run  :" ${fCO2_ff}
+    else
+            # For historical, get the fossile fuel file :
+	fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
+	echo "Fossil Fuel for historical run  :" ${fCO2_ff}
+    fi
+    
+        # Get the value of ocean carbon flux
+    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
+    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
+    echo "Ocean carbon flux  :" ${CO2MBG}
+    
+        # Get the value of land fluxes
+    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
+    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
+    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
+    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
+    echo "Land carbon flux (NEP)         :" ${CO2SRF}
+    echo "LU flux          (FLUC)        :" ${CO2LU}
+    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
+    
+        # Previous CO2
+    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+    echo "Previous CO2  :" ${CO2_ppm_prec}
+    
+        # Formula
+    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
+    echo "New CO2  :" ${CO2_ppm}
+    
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+    
+    IGCM_debug_PopStack "ATM_Carbon_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/oasis.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/oasis.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/oasis.driver	(revision 5893)
@@ -0,0 +1,127 @@
+#!/bin/ksh
+#-----------------------------------
+CPL_Initialize ()
+{
+    IGCM_debug_PushStack "CPL_Initialize"
+ 
+    echo INITIALIZE CPL !!!
+
+# Local function to find parameters in LMDZ .def files
+    lmdzgrep () {
+        grep $1 $2 |grep -v "#" | awk "-F=" '{print $2}' | awk "-F " '{print $1}'
+    }
+
+    #RESOL_CPL=$( echo $RESOL | awk "-F-" '{print $1}' )
+    RESOL_CPL=${RESOL_OCE}x${RESOL_ATM}
+    IGCM_debug_Print 1 "RESOL_CPL      : ${RESOL_CPL}"
+
+    CPL_OkDay="n"
+    CPL_OkMonth="n"
+
+    for CPL_Frequency in ${config_CPL_WriteFrequency} ; do
+	case ${CPL_Frequency} in
+	    *D|*d) CPL_OkDay="y"   ;;
+	    *M)    CPL_OkMonth="y" ;;
+	esac
+    done
+
+    IGCM_debug_PopStack "CPL_Initialize"
+
+}
+
+#-----------------------------------
+CPL_Update ()
+{
+    IGCM_debug_PushStack "CPL_Update"
+
+    ############ Update Time and Counters ##############
+    ##-- Calcul de la duree du job (en secondes)
+    (( D_JOB_SEC = 3600 * 24 * PeriodLengthInDays ))
+
+    ############ Update Other Parameters  ##############
+    ## Read Output_mode option in oasis.card --> Put "y" to have coupling variables in ouptut files
+    CPL_OutputMode="n"
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/oasis.card UserChoices OutputMode 
+    eval CPL_OutputMode=\${oasis_UserChoices_OutputMode} > /dev/null 2>&1
+    echo CPL_OutputMode = ${CPL_OutputMode}
+    CPL_OutputVar='EXPORTED'
+    if [ ${CPL_OutputMode} = y ] ; then
+	CPL_OutputVar='EXPOUT'
+    fi
+
+    FreqCoupling=${oasis_UserChoices_FreqCoupling:-86400}
+
+    ## Calculate lag for transfer of fields from atmosphere -> ocean.
+    ## LagAtm="1day in sec"/day_step * iphysiq/nsplit_phys
+    ## First get day_step, iphyisq and nsplit_phys from LMDZ parameter files
+    day_step=$(    lmdzgrep day_step gcm.def )
+    iphysiq=$(     lmdzgrep iphysiq gcm.def )
+    nsplit_phys=$( lmdzgrep nsplit_phys physiq.def )
+
+    IGCM_debug_Print 3 "Parametre de calcul Lag LMDZ recuperes " ${day_step} ${iphysiq} ${nsplit_phys}
+
+    [[ ${nsplit_phys} -eq 0 || "X${nsplit_phys}" = "X" ]] && nsplit_phys=1
+
+    IGCM_debug_Print 3 "Parametre de calcul Lag LMDZ mis a jour " ${day_step} ${iphysiq} ${nsplit_phys}
+                                                              
+    (( LagAtm = 86400 / day_step * iphysiq / nsplit_phys ))
+
+    (( LagOce = 86400 / OPA_NPDT_DAY ))
+
+    IGCM_debug_Print 1 "OPA_NPDT_DAY : ${OPA_NPDT_DAY}"
+    IGCM_debug_Print 1 "LagAtm        : ${LagAtm}"
+    IGCM_debug_Print 1 "LagOce        : ${LagOce}"
+
+    ## Use of Lucia ##
+    lucia_ok=""
+    if [ ${oasis_UserChoices_Lucia} = y ] ; then
+	lucia_ok="-1"
+    fi
+    
+    ############ Update Parameter Files   ##############
+    sed -e "s/<total_time>/${D_JOB_SEC}/" \
+	-e "s/<lucia_ok>/${lucia_ok}/" \
+	-e "s/<output_mode>/${CPL_OutputVar}/g" \
+	-e "s/<freq_coupling>/${FreqCoupling}/g" \
+	-e "s/<lag_atm>/${LagAtm}/g" \
+	-e "s/<lag_oce>/${LagOce}/g" \
+	namcouple > namcouple.tmp
+    IGCM_sys_Mv namcouple.tmp namcouple
+    # For IPSLCM6 and use of OASIS-MCT
+    if [ ${CumulPeriod} -eq 1 ]; then
+	ncrename -v OIceFrac,OIceFrc sstoc.nc > /dev/null 2>&1
+    fi
+    # For use of XIOS
+    IGCM_comp_modifyXmlFile force iodef.xml using_oasis NONE true
+
+    IGCM_debug_PopStack "CPL_Update"
+}
+
+#-----------------------------------
+CPL_Finalize ()
+{
+    IGCM_debug_PushStack "CPL_Finalize"
+
+    if [ "${CPL_OutputMode}" = "y" ] ; then
+
+        [[ ${CPL_OkDay}   = "y" ]] && date >TEMPO_1D_cpl_atm.nc
+        [[ ${CPL_OkMonth} = "y" ]] && date >TEMPO_1M_cpl_atm.nc
+        [[ ${CPL_OkDay}   = "y" ]] && date >TEMPO_1D_cpl_oce.nc
+        [[ ${CPL_OkMonth} = "y" ]] && date >TEMPO_1M_cpl_oce.nc
+
+    fi
+
+    ## Use of Lucia ##
+    if [ ${oasis_UserChoices_Lucia} = y ] ; then
+	echo "Use of LUCIA"
+    #   To be changed 
+    #   On Curie
+    #   /ccc/scratch/cont003/dsm/p86caub/LUCIA/lucia
+    #   On Ada
+    #   /linkhome/rech/psl/rpsl035/LUCIA/lucia
+    fi
+
+    echo FINALIZE CPL !!!
+
+    IGCM_debug_PopStack "CPL_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/opa9.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/opa9.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/opa9.driver	(revision 5893)
@@ -0,0 +1,275 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function OCE_Initialize
+{
+    IGCM_debug_PushStack "OCE_Initialize"
+
+    JOB_NAME=${config_UserChoices_JobName}
+
+    RESOL_OCE_ICE=$( echo ${RESOL} | awk "-Fx" '{print $1}' )
+    case ${RESOL_OCE_ICE} in
+	( *LIM2* ) SEAICE_MODEL=LIM2 ; 	LIM_VERSION=2 ;;
+	( *LIM3* ) SEAICE_MODEL=LIM3 ; 	LIM_VERSION=3 ;;
+	( *CICE* ) SEAICE_MODEL=CICE                  ;;
+	( *      ) SEAICE_MODEL=UNKNOWN               ;;
+    esac
+    RESOL_OCE=$( echo ${RESOL_OCE_ICE} | sed "s/${SEAICE_MODEL}//" )
+
+    IGCM_debug_Print 1 "RESOL          : ${RESOL}"
+    IGCM_debug_Print 1 "RESOL_OCE_ICE  : ${RESOL_OCE_ICE}"
+    IGCM_debug_Print 1 "SEAICE_MODEL   : ${SEAICE_MODEL}"
+    IGCM_debug_Print 1 "LIM_VERSION    : ${LIM_VERSION}"
+    IGCM_debug_Print 1 "RESOL_OCE      : ${RESOL_OCE}"
+
+    # Local function to find namelists parameters
+    #supergrep () { grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%" ; }
+    supergrep () { grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%" -e "s%^ *$1 *=%%" ; }
+    ##--Variables used by OPA --
+    NAMELIST_OPA_CFG=${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE}_cfg
+    IGCM_debug_Print 1 "namelist_cfg : ${NAMELIST_OPA_CFG}"
+    if [ ! -r ${NAMELIST_OPA_CFG} ] ; then
+        IGCM_debug_Exit "${NAMELIST_OPA_CFG} not found"
+	IGCM_debug_Verif_Exit
+    fi
+    OPA_RDT=$(       supergrep rn_rdt        ${NAMELIST_OPA_CFG} )
+    OPA_NN_FSBC=$(   supergrep nn_fsbc       ${NAMELIST_OPA_CFG} )
+    #
+    # OPA_RDT=$(       supergrep rn_rdt        namelist_cfg )
+    # OPA_NN_FSBC=$(   supergrep nn_fsbc       namelist_cfg )
+    (( OPA_NPDT_DAY   =  86400 / OPA_RDT        ))
+    (( OPA_NPDT_YEAR  =  OPA_NPDT_DAY * 365     ))
+    (( OPA_RDT_SBC    =  OPA_RDT * OPA_NN_FSBC ))
+ 
+    # Period Length In Days between DateBegin and first day of calendar 0001 01 01
+    # /!\ Needed by OPA namelist to compute file names /!\
+    (( DaysSinceJC = $( IGCM_date_DaysSinceJC ${DateBegin} ) + 1 ))
+
+    IGCM_debug_Print 1 " "
+    IGCM_debug_Print 1 "OPA_RDT        ${OPA_RDT}"
+    IGCM_debug_Print 1 "OPA_NN_FSBC    ${OPA_NN_FSBC}"
+    IGCM_debug_Print 1 "OPA_RDT_SBC    ${OPA_RDT_SBC}"
+    IGCM_debug_Print 1 "OPA_NPDT_DAY   ${OPA_NPDT_DAY}"
+    IGCM_debug_Print 1 "OPA_NPDT_YEAR  ${OPA_NPDT_YEAR}"
+    IGCM_debug_Print 1 "DaysSinceJC    ${DaysSinceJC}"
+
+    ## Check that nn_fsbc is correct compare to coupling frequency
+    FreqCoupling=${oasis_UserChoices_FreqCoupling:-86400}
+    
+    ## This informations are used for diaptr, trends and diagap files
+    ## only the first frequency is used for this files
+    
+    IGCM_debug_Print 1 "FreqCoupling    ${FreqCoupling}"
+    IGCM_debug_Print 1 "OPA_NN_FSBC    ${OPA_NN_FSBC}"
+    IGCM_debug_Print 1 "OPA_RDT        ${OPA_RDT}"
+    IGCM_debug_Print 1 "OPA_RDT_SBC    ${OPA_RDT_SBC}"
+    
+    if [[ ${OPA_RDT_SBC} -gt ${FreqCoupling} ]] ; then
+	IGCM_debug_Exit "OPA_RDT_SBC=${OPA_RDT_SBC} is greater than FreqCoupling=${FreqCoupling}"
+     	IGCM_debug_Verif_Exit
+    fi
+    
+    IGCM_debug_PopStack "OCE_Initialize"
+   
+}
+
+#-----------------------------------------------------------------
+function OCE_Update
+{
+    IGCM_debug_PushStack "OCE_Update"
+  
+    ##--Write Frequency for iomput
+    ## Differents frequencies are allowed for grid_[TUVW] and icemod files
+
+    V1D_ENABLE=".FALSE."
+    V1M_ENABLE=".FALSE."
+    V1Y_ENABLE=".FALSE."
+
+    for frequency in ${config_OCE_WriteFrequency} ; do
+        case ${frequency} in
+            ( 1D|1d ) V1D_ENABLE=".TRUE." ;;
+            ( 1M|1m ) V1M_ENABLE=".TRUE." ;;
+            ( *[yY] ) V1Y_ENABLE=".TRUE." ;;
+        esac
+    done
+
+    # Period Length In Days between DateBegin and first day of calendar 0001 01 01
+    # Needed by OPA namelist to compute correct file names 
+    (( PeriodDaysSinceJC =  $( IGCM_date_DaysSinceJC ${PeriodDateBegin} ) + 1  ))
+
+    ##-- Number of time steps updated : the first, the last and the number of time steps
+    (( OPA_NIT000 = ( PeriodDaysSinceJC - DaysSinceJC ) * OPA_NPDT_DAY + 1 ))
+    (( OPA_NPDT   = PeriodLengthInDays * OPA_NPDT_DAY ))
+    (( OPA_NITEND = OPA_NIT000 + OPA_NPDT - 1))
+
+    ##-- We force one restart file at the end of the trunk
+    OPA_NSTOCK="${OPA_NITEND}"
+
+    ##-- Additionnal Restart Option to force reproducibility ; force kt to kt red in restart file
+    ## ${opa9_UserChoices_Reproducibility_after_restart}
+    
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices Reproducibility_after_restart
+
+    ##-- Restart configuration
+    if ( [ "${opa9_UserChoices_Reproducibility_after_restart}" = "y" ] ) ; then
+	OPA_LRSTAR=.TRUE.
+	OPA_NRSTDT=2
+	#echo "OPA RESTART"
+	IGCM_debug_Print 1 'WARNING : dangerous option for NEMO opa9 pisces lim3'
+	IGCM_debug_Print 1 'Reproducibility_after_Restart forced ie kt forced to kt red in restart file : ' ${opa9_UserChoices_Reproducibility_after_restart}
+        OPA_NMSH=0
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_OCE_Restart}" = "n" ] ) ; then
+	OPA_LRSTAR=.FALSE.
+	OPA_NRSTDT=0
+        # Put OPA_NMSH=0 when OPA running in parallel mode
+	OPA_NMSH=1
+	#echo "NO OPA RESTART"
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_OCE_Restart}" = "y" ] ) ; then
+	OPA_LRSTAR=.TRUE.
+	OPA_NRSTDT=0
+	OPA_NMSH=1
+	#echo "OPA RESTART"
+    else
+	OPA_LRSTAR=.TRUE.
+	OPA_NRSTDT=2
+	OPA_NMSH=0
+	#echo "OPA RESTART"
+    fi
+
+    ##-- Meshmask option
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices mesh_mask
+
+    if [ "${opa9_UserChoices_mesh_mask}" = "y" ]; then
+        OPA_NMSH=1
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices mesh_mask "n"
+    fi
+
+    # nleapy configuration
+    case ${config_UserChoices_CalendarType} in
+        ( leap|gregorian) OPA_NLEAPY=1  ;;
+        ( noleap        ) OPA_NLEAPY=0  ;;
+        ( 360d          ) OPA_NLEAPY=30 ;;
+        ( *             ) OPA_NLEAPY=30 ;;
+    esac
+
+    if ( [ "${opa9_UserChoices_Reproducibility_after_restart}" = "y" ] ) ; then
+        ##-- choose the right restart file
+        NEMO_RESTART_FILE=restartopa.nc
+        [ -f restartopa_0000.nc ] && NEMO_RESTART_FILE=restartopa_0000.nc
+        ##-- Getting from restart file the last time step of the run at which we want to re-start
+        NEMO_KT_FROM_RESTART=$(ncdump -v kt ${NEMO_RESTART_FILE}|grep 'kt ='|awk '{print $3}' )
+
+        if ( [ "${CumulPeriod}" -eq 1 ] ) ; then
+            ## Force the date in the restart file to be the last day before the begining of the new run
+            dateendprevious=$( IGCM_date_AddDaysToGregorianDate ${DateBegin} -1 )
+            IGCM_debug_Print 1 "Previous Date  ${dateendprevious}"
+            IGCM_debug_Print 1 "cmd done to modify NEMO restartfile:   ncap2 -s ndastp=${dateendprevious} ${NEMO_RESTART_FILE}  tmp.nc"
+            if [ -f restartopa_0000.nc ] ; then
+                typeset -Z4 ncpu=0
+                while [ $ncpu -lt ${OCE_PROC_MPI} ] ; do
+                    ncap2 -s "ndastp=${dateendprevious}" restartopa_${ncpu}.nc  tmp.nc
+                    mv tmp.nc restartopa_${ncpu}.nc
+                    (( ncpu = ncpu + 1 ))
+                done
+            else
+                ncap2 -s "ndastp=${dateendprevious}" ${NEMO_RESTART_FILE}  tmp.nc
+                mv tmp.nc ${NEMO_RESTART_FILE}
+            fi
+            ##-- Getting from restart file the "new" restart date of run at which we want to re-start
+            NEMO_NDASTP_FROM_RESTART=$(ncdump -v ndastp ${NEMO_RESTART_FILE}|grep 'ndastp ='|awk '{print $3}' )
+            IGCM_debug_Print 1 "NEMO_NDASTP (from Restart) for 1st Period       : ${NEMO_NDASTP_FROM_RESTART}"
+
+        fi
+
+        (( NEMO_NIT000 = NEMO_KT_FROM_RESTART + 1 ))
+        (( NEMO_NITEND = NEMO_KT_FROM_RESTART + OPA_NITEND - OPA_NIT000 + 1 ))
+        IGCM_debug_Print 1 "NEMO_NIT000 (from Restart)        : ${NEMO_NIT000}"
+        IGCM_debug_Print 1 "NEMO_NITEND (from Restart + ... ) : ${NEMO_NITEND}"
+        ##-- We force one restart file at the end of the trunk
+        OPA_NSTOCK="${NEMO_NITEND}"
+        OPA_NIT000="${NEMO_NIT000}"
+        OPA_NITEND="${NEMO_NITEND}"
+    fi
+
+    typeset -r PRECIS=8
+    NEMO_END=$( echo $( awk "BEGIN { printf \"%0${PRECIS}d\",${OPA_NITEND} }" ) ) 
+
+    IGCM_comp_modifyNamelist blocker    namelist_cfg cn_exp    ${config_UserChoices_JobName}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_it000  ${OPA_NIT000}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_itend  ${OPA_NITEND}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg ln_rstart ${OPA_LRSTAR}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_stock  ${OPA_NSTOCK}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_rstctl ${OPA_NRSTDT}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_date0  ${PeriodDateBegin}
+    IGCM_comp_modifyNamelist nonblocker namelist_cfg nn_msh    ${OPA_NMSH}
+    IGCM_comp_modifyNamelist nonblocker namelist_cfg nn_rnf_depth_file  ${OPA_NMSH}
+    IGCM_comp_modifyNamelist blocker    namelist_cfg nn_leapy  ${OPA_NLEAPY}
+    
+    # Update iodef.xml
+
+    IGCM_debug_Print 1 'Informations into iodef.xml : V1D_ENABLE V1M_ENABLE V1Y_ENABLE '
+    IGCM_debug_Print 1 ${V1D_ENABLE} ${V1M_ENABLE} ${V1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1d enabled ${V1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1m enabled ${V1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-opa.xml 1y enabled ${V1Y_ENABLE}
+	
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1d enabled ${V1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1m enabled ${V1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-lim.xml 1y enabled ${V1Y_ENABLE}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1d enabled ${V1D_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1m enabled ${V1M_ENABLE}
+    IGCM_comp_modifyXmlFile nonblocker file_def_nemo-pisces.xml 1y enabled ${V1Y_ENABLE}
+
+   # Update reference year/month/day
+    IGCM_date_GetYearMonthDay ${DateBegin} iyear imonth iday
+    IGCM_comp_modifyXmlFile force context_nemo.xml ref_year  NONE ${iyear} 
+    IGCM_comp_modifyXmlFile force context_nemo.xml ref_month NONE ${imonth} 
+    IGCM_comp_modifyXmlFile force context_nemo.xml ref_day   NONE ${iday} 
+
+    # vargas/titane/MPP and switch from 1 proc to 5 procs. We need to suppres restartopa the second month, if restartopa_0000 exist
+    # same thing for restart_trc and restart_ice_in
+
+    for restartfilenemo in restartopa restart_trc restart_ice_in ; do
+      [ -f ${restartfilenemo}.nc ] && [ -f ${restartfilenemo}_0000.nc ] && IGCM_sys_Rm -f ${restartfilenemo}.nc
+    done
+
+    # Add include of nemo context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="nemo" src="./context_nemo.xml"/>
+    echo '<context id="nemo" src="./context_nemo.xml"/>' > add.tmp
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+        echo '<context id="nemo" src="./ping_nemo.xml"/>' >> add.tmp
+        echo '<context id="nemo" src="./dr2xml_opa9.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" \
+        iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def_nemo*.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done 
+	rm add.tmp
+    fi
+
+    IGCM_debug_PopStack "OCE_Update"
+}
+
+#-----------------------------------
+function OCE_Finalize
+{
+    IGCM_debug_PushStack "OCE_Finalize"
+
+    IGCM_debug_Print 1 FINALIZE OCE !!!
+
+    IGCM_debug_PopStack "OCE_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/orchidee.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/orchidee.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/orchidee.driver	(revision 5893)
@@ -0,0 +1,149 @@
+#!/bin/ksh
+#D- Driver du script pour ORCHIDEE
+#-----------------------------------------------------------------
+function SRF_Initialize
+{
+    IGCM_debug_PushStack "SRF_Initialize"
+
+    ##- Define variable DefSuffix set in orchidee.card
+    ##  This variable is used in orchidee.card to choose
+    ##  parameter file(orchidee.def_DefSuffix).
+    if [ ! X${orchidee_UserChoices_DefSuffix} = X ] ; then
+        DefSuffix=${orchidee_UserChoices_DefSuffix}
+    else
+        DefSuffix=Choi
+    fi
+
+    IGCM_debug_PopStack "SRF_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SRF_Update
+{
+    IGCM_debug_PushStack "SRF_Update"
+
+    ## 1. Modifications in orchidee.def parameter file
+
+    # Activate STOMATE if the compontent SBG=stomate is set in config.card
+    if [ X${config_ListOfComponents_SBG} = Xstomate ] ; then
+	# Activate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE y
+    else
+	# Deactivate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE n
+	# Deactivate output files for stomate
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq 1mo
+        IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq 1mo
+    fi
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -ne 1 ] || [ "${config_SRF_Restart}" != "n" ] ) ; then
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in sechiba_rest_in.nc
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in NONE
+    fi
+
+    # Modify in orchidee.def VEGET_UPDATE if it is set in orchidee.card section UserChoices
+    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y
+    fi
+
+    # Activate creation of river description file only for the first period
+    if [ ${CumulPeriod} -eq 1 ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC y
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC n
+    fi
+
+    # Activate calcul of chemistry BVOC
+    if [ ! X${orchidee_UserChoices_CHEMISTRY_BVOC} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def CHEMISTRY_BVOC ${orchidee_UserChoices_CHEMISTRY_BVOC}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def CHEMISTRY_BVOC n
+    fi
+
+    ## 2. Mangement of output and modifications of related xml files
+
+    # Set default values for sechiba1_enabled, sechiba1_freq and sechiba2_enabled.
+    sechiba1_enabled=.FALSE.
+    sechiba2_enabled=.FALSE.
+    sechiba1_freq=0s
+
+    # Get WriteFrenquecies from config.card for SECHIBA
+    # Note that it is only possible to have one HF and one other option. 
+    # If more options are set in config.card only the latest will be used.
+    for frequency in ${config_SRF_WriteFrequency} ; do
+	case ${frequency} in
+	    *Y|*y) 
+		NbYears=$( echo ${frequency} | awk -F '[yY]' '{print $1}' )
+		NbDaysYear=$( IGCM_date_DaysInYear ${year} )
+		sechiba1_enabled=.TRUE.
+		sechiba1_freq=${NbYears}y ;;
+	    *M|*m)
+		NbMonths=$( echo ${frequency} | awk -F '[mM]' '{print $1}' )
+		sechiba1_enabled=.TRUE.
+		sechiba1_freq=${NbMonths}mo ;;
+	    *D|*d)
+		NbDays=$( echo ${frequency} | awk -F '[dD]' '{print $1}' )
+		sechiba1_enabled=.TRUE.
+		sechiba1_freq=${NbDays}d ;;
+	    *s)
+		WriteInSeconds=$( echo ${frequency} | awk -F '[s]' '{print $1}' )
+		sechiba1_enabled=.TRUE.
+		sechiba1_freq=${WriteInSeconds}s ;;
+            HF|hf) 
+		sechiba2_enabled=.TRUE. ;;
+	    *) 
+		IGCM_debug_Exit "SRF WriteFrequency=${frequency} is invalid. Choose between xY, xM, xD, xs and HF for Sechiba." ;;
+	esac
+    done
+
+    # Do the modifications in file_def_orchidee.xml
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 enabled ${sechiba1_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_freq ${sechiba1_freq}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 enabled ${sechiba2_enabled}
+
+    # Add include of orchidee context in iodef.xml
+    # In iodef.xml add on the next line after "COMPONENT CONTEXT"
+    echo '<context id="orchidee" src="./context_orchidee.xml"/>' > add.tmp
+    # Add inclusion of file context_input_orchidee.xml if this file exists
+    if [ -f context_input_orchidee.xml ] ; then
+        echo '<context id="orchidee" src="./context_input_orchidee.xml"/>' >> add.tmp
+    fi
+    # Include xml files for output configuration if running with workflow CMIP6
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+        echo '<context id="orchidee" src="./ping_orchidee.xml"/>' >> add.tmp
+        echo '<context id="orchidee" src="./dr2xml_orchidee.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+	if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	    listfile=$(ls file_def*orchidee.xml)
+	    echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	    for file in ${listfile}
+	    do
+		cp ${file} ${file}.tmp
+		sed -e "/<file id/r add.tmp" \
+		    ${file}.tmp > ${file}
+		rm ${file}.tmp 
+	    done 
+	    rm add.tmp
+	fi
+
+    IGCM_debug_PopStack "SRF_Update"
+}
+
+#-----------------------------------------------------------------
+function SRF_Finalize
+{
+    IGCM_debug_PushStack "SRF_Finalize"
+
+    IGCM_debug_PopStack "SRF_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/pisces.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/pisces.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/pisces.driver	(revision 5893)
@@ -0,0 +1,113 @@
+#!/bin/ksh
+
+#-----------------------------------
+function MBG_Initialize
+{ 
+    IGCM_debug_PushStack "MBG_Initialize"
+
+    # Local function to find parameters in LMDZ .def files
+
+lmdzgrep2 () {
+     grep ${1} ${2} | grep -v "#"  | sed -e 's/=//g' -e 's/://g' -e 's/_AUTO_//' -e 's/DEFAULT//' | sed -e "s/${1}//" 
+}
+
+    ##--Variables used by MBG --
+
+    # ln_rsttr  boolean term for tracer model restart (true or false)
+    # nrsttr    control of the time step (0, 1 or 2)
+    
+    IGCM_debug_PopStack "MBG_Initialize"
+}
+
+#-----------------------------------
+function MBG_Update
+{
+    IGCM_debug_PushStack "MBG_Update"
+
+    ##-- Restart configuration
+
+    ##-- Restart configuration
+    if ( [ "${opa9_UserChoices_Reproducibility_after_restart}" = "y" ] ) ; then
+        TOP_LN_RSTR=.TRUE.
+        TOP_NN_RSTR=2
+        IGCM_debug_Print 1 'WARNING : dangerous option for NEMO pisces too'
+        IGCM_debug_Print 1 'Reproducibility_after_Restart forced : ' ${opa9_UserChoices_Reproducibility_after_restart}
+
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_MBG_Restart}" = "n" ] ) ; then
+
+        #echo "NO RESTART FOR TOP"
+        TOP_LN_RSTR=.FALSE.
+        TOP_NN_RSTR=0
+
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_MBG_Restart}" = "y" ] ) ; then
+
+        #echo "RESTART TOP"
+        TOP_LN_RSTR=.TRUE.
+        TOP_NN_RSTR=0
+
+        # If we start from IPSLCM5* restart files.
+	for file in restart_trc*.nc ; do
+            ncrename -v TRBDSi,TRBGSi -v TRNDSi,TRNGSi -v TRNBSi,TRNDSi -v TRBBSi,TRBDSi ${file} > /dev/null 2>&1
+	done
+
+    else
+
+        #echo "RESTART TOP"
+        TOP_LN_RSTR=.TRUE.
+        TOP_NN_RSTR=2
+
+    fi
+
+    ##-- Enable dbio output file
+    DBIO_ENABLE=".FALSE." 
+    eval pisces_DBIO_ENABLE=\${pisces_UserChoices_DBIO_ENABLE} > /dev/null 2>&1
+    if [ "${pisces_DBIO_ENABLE}" = "y" ]; then
+        DBIO_ENABLE=".TRUE."
+    fi
+
+    # update iodef.xml
+
+    IGCM_debug_Print 1 " 'Informations into iodef.xml : DBIO_ENABLE : ${DBIO_ENABLE}"
+
+    sed -e "s/<DBIO_ENABLE>/${DBIO_ENABLE}/" \
+        iodef.xml > iodef.xml.tmp
+
+    IGCM_sys_Mv iodef.xml.tmp iodef.xml
+
+    ##-- CO2 forcing : update atcco2 value in namelist_pisces_cfg
+    if [ "${pisces_UserChoices_CARBON_CYCLE}" = "y" ]; then
+       	IGCM_debug_Print 1 "Special case for carbon cycle"
+	# Activate this case by putting CARBON_CYCLE=y in pisces.card section UserChoices
+	IGCM_debug_Print 1  'Update atcco2 in namelist_pisces_cfg with value from file co2.log'
+	PathCO2log=${SUBMIT_DIR}
+	PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+	IPCC_PIS_CO2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	IGCM_debug_Print 1 "IPCC_PIS_CO2 : ${IPCC_PIS_CO2} "
+	IGCM_comp_modifyNamelist force  namelist_pisces_cfg atcco2 ${IPCC_PIS_CO2}
+    else
+	IGCM_debug_Print 1 "Take same CO2 as for LMDZ, in parameter file config.def."
+	# ATM_Update is done before MBG_Update and therefore config.def file contains the correct value for CO2.
+	IGCM_debug_Print 1 'Update atcco2 in namelist_pisces_cfg with same value as for LMDZ'
+	LMDZ_CO2=$( lmdzgrep2 co2_ppm config.def )
+	IGCM_debug_Print 1 "LMDZ_CO2 : ${LMDZ_CO2} "
+	IGCM_comp_modifyNamelist force  namelist_pisces_cfg atcco2 ${LMDZ_CO2}
+    fi
+
+    ##-- Update namelist_top_cfg and namelist_pisces_cfg
+    IGCM_comp_modifyNamelist blocker  namelist_top_cfg     ln_rsttr   ${TOP_LN_RSTR}
+    IGCM_comp_modifyNamelist blocker  namelist_top_cfg     nn_rsttr   ${TOP_NN_RSTR}
+    IGCM_comp_modifyNamelist blocker  namelist_pisces_cfg  nn_pisdmp  ${OPA_NPDT_YEAR}
+    
+    IGCM_debug_PopStack "MBG_Update"
+}
+
+#-----------------------------------
+function MBG_Finalize
+{
+    IGCM_debug_PushStack "MBG_Finalize"
+
+    echo FINALIZE MBG !!!
+
+    IGCM_debug_PopStack "MBG_Finalize"
+}
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/stomate.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/stomate.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/stomate.driver	(revision 5893)
@@ -0,0 +1,71 @@
+#!/bin/ksh
+
+#D- Driver pour ORCHIDEE stomate component
+
+#-----------------------------------------------------------------
+function SBG_Initialize
+{
+    IGCM_debug_PushStack "SBG_Initialize"
+
+    IGCM_debug_PopStack "SBG_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SBG_Update
+{
+    IGCM_debug_PushStack "SBG_Update"
+    
+    # Output management
+
+    # Set default values for stomate output files.
+    stomate_enabled=.FALSE.
+    stomate_freq=0s
+
+    # Read WriteFrequency set in config.card section SBG. 
+    # Only one choice can be set as WriteFrequency. The same choice will be used for 
+    # both stomate_history and stomate_ipcc_history files. 
+    for frequency in ${config_SBG_WriteFrequency} ; do
+	case ${frequency} in
+	    *Y|*y) 
+		NbYears=$( echo ${frequency} | awk -F '[yY]' '{print $1}' )
+		NbDaysYear=$( IGCM_date_DaysInYear ${year} )
+		stomate_enabled=.TRUE.
+		stomate_freq=${NbYears}y ;;
+	    *M|*m) 
+		NbMonths=$( echo ${frequency} | awk -F '[mM]' '{print $1}' )
+		stomate_enabled=.TRUE.
+		stomate_freq=${NbMonths}mo ;;
+	    *D|*d)
+		NbDays=$( echo ${frequency} | awk -F '[dD]' '{print $1}' )
+		stomate_enabled=.TRUE.
+		stomate_freq=${NbDays}d ;;
+	    *) 
+		IGCM_debug_Exit "SBG WriteFrequency=${frequency} is invalid. Choose between xY, xM and xD for Stomate." ;;
+	esac
+    done
+
+    # Modify file_def_orchidee.xml
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled ${stomate_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq ${stomate_freq}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled ${stomate_enabled}
+    IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq ${stomate_freq}
+    
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -eq 1 ] && [ "${config_SBG_Restart}" = "n" ] ) ; then
+        echo "STOMATE : without restart"
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN NONE
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN stomate_rest_in.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Update"
+}
+
+#-----------------------------------------------------------------
+function SBG_Finalize
+{
+    IGCM_debug_PushStack "SBG_Finalize"
+    
+    IGCM_debug_PopStack "SBG_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/xios.driver
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/xios.driver	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/DRIVER/xios.driver	(revision 5893)
@@ -0,0 +1,37 @@
+#!/bin/ksh
+#-----------------------------------
+function IOS_Initialize
+{ 
+    IGCM_debug_PushStack "IOS_Initialize"
+
+    echo INITIALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Initialize"
+}
+
+#-----------------------------------
+function IOS_Update
+{
+    IGCM_debug_PushStack "IOS_Update"
+
+    echo UPDATE IOS !!!
+# Activate server mode
+    IGCM_comp_modifyXmlFile force iodef.xml using_server NONE true
+
+    if [ -f namcouple ] ; then
+	sed -e "s/2  LMDZ oceanx/3 LMDZ oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp 
+	IGCM_sys_Mv namcouple.tmp namcouple
+    fi
+
+    IGCM_debug_PopStack "IOS_Update"
+}
+
+#-----------------------------------
+function IOS_Finalize
+{
+    IGCM_debug_PushStack "IOS_Finalize"
+
+    echo FINALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Finalize"
+}
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 5893)
@@ -0,0 +1,3085 @@
+year    month  gridsum (PgC/mth)
+1751    01     0.00021
+1751    02     0.00021
+1751    03     0.00021
+1751    04     0.00021
+1751    05     0.00021
+1751    06     0.00021
+1751    07     0.00021
+1751    08     0.00021
+1751    09     0.00021
+1751    10     0.00021
+1751    11     0.00021
+1751    12     0.00021
+1752    01     0.00021
+1752    02     0.00021
+1752    03     0.00021
+1752    04     0.00021
+1752    05     0.00021
+1752    06     0.00021
+1752    07     0.00021
+1752    08     0.00021
+1752    09     0.00021
+1752    10     0.00021
+1752    11     0.00021
+1752    12     0.00021
+1753    01     0.00021
+1753    02     0.00021
+1753    03     0.00021
+1753    04     0.00021
+1753    05     0.00021
+1753    06     0.00021
+1753    07     0.00021
+1753    08     0.00021
+1753    09     0.00021
+1753    10     0.00021
+1753    11     0.00021
+1753    12     0.00021
+1754    01     0.00021
+1754    02     0.00021
+1754    03     0.00021
+1754    04     0.00021
+1754    05     0.00021
+1754    06     0.00021
+1754    07     0.00021
+1754    08     0.00021
+1754    09     0.00021
+1754    10     0.00021
+1754    11     0.00021
+1754    12     0.00021
+1755    01     0.00021
+1755    02     0.00021
+1755    03     0.00021
+1755    04     0.00021
+1755    05     0.00021
+1755    06     0.00021
+1755    07     0.00021
+1755    08     0.00021
+1755    09     0.00021
+1755    10     0.00021
+1755    11     0.00021
+1755    12     0.00021
+1756    01     0.00023
+1756    02     0.00023
+1756    03     0.00023
+1756    04     0.00023
+1756    05     0.00023
+1756    06     0.00023
+1756    07     0.00023
+1756    08     0.00023
+1756    09     0.00023
+1756    10     0.00023
+1756    11     0.00023
+1756    12     0.00023
+1757    01     0.00023
+1757    02     0.00023
+1757    03     0.00023
+1757    04     0.00023
+1757    05     0.00023
+1757    06     0.00023
+1757    07     0.00023
+1757    08     0.00023
+1757    09     0.00023
+1757    10     0.00023
+1757    11     0.00023
+1757    12     0.00023
+1758    01     0.00023
+1758    02     0.00023
+1758    03     0.00023
+1758    04     0.00023
+1758    05     0.00023
+1758    06     0.00023
+1758    07     0.00023
+1758    08     0.00023
+1758    09     0.00023
+1758    10     0.00023
+1758    11     0.00023
+1758    12     0.00023
+1759    01     0.00023
+1759    02     0.00023
+1759    03     0.00023
+1759    04     0.00023
+1759    05     0.00023
+1759    06     0.00023
+1759    07     0.00023
+1759    08     0.00023
+1759    09     0.00023
+1759    10     0.00023
+1759    11     0.00023
+1759    12     0.00023
+1760    01     0.00023
+1760    02     0.00023
+1760    03     0.00023
+1760    04     0.00023
+1760    05     0.00023
+1760    06     0.00023
+1760    07     0.00023
+1760    08     0.00023
+1760    09     0.00023
+1760    10     0.00023
+1760    11     0.00023
+1760    12     0.00023
+1761    01     0.00025
+1761    02     0.00025
+1761    03     0.00025
+1761    04     0.00025
+1761    05     0.00025
+1761    06     0.00025
+1761    07     0.00025
+1761    08     0.00025
+1761    09     0.00025
+1761    10     0.00025
+1761    11     0.00025
+1761    12     0.00025
+1762    01     0.00025
+1762    02     0.00025
+1762    03     0.00025
+1762    04     0.00025
+1762    05     0.00025
+1762    06     0.00025
+1762    07     0.00025
+1762    08     0.00025
+1762    09     0.00025
+1762    10     0.00025
+1762    11     0.00025
+1762    12     0.00025
+1763    01     0.00025
+1763    02     0.00025
+1763    03     0.00025
+1763    04     0.00025
+1763    05     0.00025
+1763    06     0.00025
+1763    07     0.00025
+1763    08     0.00025
+1763    09     0.00025
+1763    10     0.00025
+1763    11     0.00025
+1763    12     0.00025
+1764    01     0.00025
+1764    02     0.00025
+1764    03     0.00025
+1764    04     0.00025
+1764    05     0.00025
+1764    06     0.00025
+1764    07     0.00025
+1764    08     0.00025
+1764    09     0.00025
+1764    10     0.00025
+1764    11     0.00025
+1764    12     0.00025
+1765    01     0.00025
+1765    02     0.00025
+1765    03     0.00025
+1765    04     0.00025
+1765    05     0.00025
+1765    06     0.00025
+1765    07     0.00025
+1765    08     0.00025
+1765    09     0.00025
+1765    10     0.00025
+1765    11     0.00025
+1765    12     0.00025
+1766    01     0.00028
+1766    02     0.00028
+1766    03     0.00028
+1766    04     0.00028
+1766    05     0.00028
+1766    06     0.00028
+1766    07     0.00028
+1766    08     0.00028
+1766    09     0.00028
+1766    10     0.00028
+1766    11     0.00028
+1766    12     0.00028
+1767    01     0.00028
+1767    02     0.00028
+1767    03     0.00028
+1767    04     0.00028
+1767    05     0.00028
+1767    06     0.00028
+1767    07     0.00028
+1767    08     0.00028
+1767    09     0.00028
+1767    10     0.00028
+1767    11     0.00028
+1767    12     0.00028
+1768    01     0.00028
+1768    02     0.00028
+1768    03     0.00028
+1768    04     0.00028
+1768    05     0.00028
+1768    06     0.00028
+1768    07     0.00028
+1768    08     0.00028
+1768    09     0.00028
+1768    10     0.00028
+1768    11     0.00028
+1768    12     0.00028
+1769    01     0.00028
+1769    02     0.00028
+1769    03     0.00028
+1769    04     0.00028
+1769    05     0.00028
+1769    06     0.00028
+1769    07     0.00028
+1769    08     0.00028
+1769    09     0.00028
+1769    10     0.00028
+1769    11     0.00028
+1769    12     0.00028
+1770    01     0.00028
+1770    02     0.00028
+1770    03     0.00028
+1770    04     0.00028
+1770    05     0.00028
+1770    06     0.00028
+1770    07     0.00028
+1770    08     0.00028
+1770    09     0.00028
+1770    10     0.00028
+1770    11     0.00028
+1770    12     0.00028
+1771    01     0.00031
+1771    02     0.00031
+1771    03     0.00031
+1771    04     0.00031
+1771    05     0.00031
+1771    06     0.00031
+1771    07     0.00031
+1771    08     0.00031
+1771    09     0.00031
+1771    10     0.00031
+1771    11     0.00031
+1771    12     0.00031
+1772    01     0.00031
+1772    02     0.00031
+1772    03     0.00031
+1772    04     0.00031
+1772    05     0.00031
+1772    06     0.00031
+1772    07     0.00031
+1772    08     0.00031
+1772    09     0.00031
+1772    10     0.00031
+1772    11     0.00031
+1772    12     0.00031
+1773    01     0.00031
+1773    02     0.00031
+1773    03     0.00031
+1773    04     0.00031
+1773    05     0.00031
+1773    06     0.00031
+1773    07     0.00031
+1773    08     0.00031
+1773    09     0.00031
+1773    10     0.00031
+1773    11     0.00031
+1773    12     0.00031
+1774    01     0.00031
+1774    02     0.00031
+1774    03     0.00031
+1774    04     0.00031
+1774    05     0.00031
+1774    06     0.00031
+1774    07     0.00031
+1774    08     0.00031
+1774    09     0.00031
+1774    10     0.00031
+1774    11     0.00031
+1774    12     0.00031
+1775    01     0.00031
+1775    02     0.00031
+1775    03     0.00031
+1775    04     0.00031
+1775    05     0.00031
+1775    06     0.00031
+1775    07     0.00031
+1775    08     0.00031
+1775    09     0.00031
+1775    10     0.00031
+1775    11     0.00031
+1775    12     0.00031
+1776    01     0.00034
+1776    02     0.00034
+1776    03     0.00034
+1776    04     0.00034
+1776    05     0.00034
+1776    06     0.00034
+1776    07     0.00034
+1776    08     0.00034
+1776    09     0.00034
+1776    10     0.00034
+1776    11     0.00034
+1776    12     0.00034
+1777    01     0.00034
+1777    02     0.00034
+1777    03     0.00034
+1777    04     0.00034
+1777    05     0.00034
+1777    06     0.00034
+1777    07     0.00034
+1777    08     0.00034
+1777    09     0.00034
+1777    10     0.00034
+1777    11     0.00034
+1777    12     0.00034
+1778    01     0.00034
+1778    02     0.00034
+1778    03     0.00034
+1778    04     0.00034
+1778    05     0.00034
+1778    06     0.00034
+1778    07     0.00034
+1778    08     0.00034
+1778    09     0.00034
+1778    10     0.00034
+1778    11     0.00034
+1778    12     0.00034
+1779    01     0.00034
+1779    02     0.00034
+1779    03     0.00034
+1779    04     0.00034
+1779    05     0.00034
+1779    06     0.00034
+1779    07     0.00034
+1779    08     0.00034
+1779    09     0.00034
+1779    10     0.00034
+1779    11     0.00034
+1779    12     0.00034
+1780    01     0.00034
+1780    02     0.00034
+1780    03     0.00034
+1780    04     0.00034
+1780    05     0.00034
+1780    06     0.00034
+1780    07     0.00034
+1780    08     0.00034
+1780    09     0.00034
+1780    10     0.00034
+1780    11     0.00034
+1780    12     0.00034
+1781    01     0.00038
+1781    02     0.00038
+1781    03     0.00038
+1781    04     0.00038
+1781    05     0.00038
+1781    06     0.00038
+1781    07     0.00038
+1781    08     0.00038
+1781    09     0.00038
+1781    10     0.00038
+1781    11     0.00038
+1781    12     0.00038
+1782    01     0.00038
+1782    02     0.00038
+1782    03     0.00038
+1782    04     0.00038
+1782    05     0.00038
+1782    06     0.00038
+1782    07     0.00038
+1782    08     0.00038
+1782    09     0.00038
+1782    10     0.00038
+1782    11     0.00038
+1782    12     0.00038
+1783    01     0.00038
+1783    02     0.00038
+1783    03     0.00038
+1783    04     0.00038
+1783    05     0.00038
+1783    06     0.00038
+1783    07     0.00038
+1783    08     0.00038
+1783    09     0.00038
+1783    10     0.00038
+1783    11     0.00038
+1783    12     0.00038
+1784    01     0.00038
+1784    02     0.00038
+1784    03     0.00038
+1784    04     0.00038
+1784    05     0.00038
+1784    06     0.00038
+1784    07     0.00038
+1784    08     0.00038
+1784    09     0.00038
+1784    10     0.00038
+1784    11     0.00038
+1784    12     0.00038
+1785    01     0.00038
+1785    02     0.00038
+1785    03     0.00038
+1785    04     0.00038
+1785    05     0.00038
+1785    06     0.00038
+1785    07     0.00038
+1785    08     0.00038
+1785    09     0.00038
+1785    10     0.00038
+1785    11     0.00038
+1785    12     0.00038
+1786    01     0.00044
+1786    02     0.00044
+1786    03     0.00044
+1786    04     0.00044
+1786    05     0.00044
+1786    06     0.00044
+1786    07     0.00044
+1786    08     0.00044
+1786    09     0.00044
+1786    10     0.00044
+1786    11     0.00044
+1786    12     0.00044
+1787    01     0.00044
+1787    02     0.00044
+1787    03     0.00044
+1787    04     0.00044
+1787    05     0.00044
+1787    06     0.00044
+1787    07     0.00044
+1787    08     0.00044
+1787    09     0.00044
+1787    10     0.00044
+1787    11     0.00044
+1787    12     0.00044
+1788    01     0.00044
+1788    02     0.00044
+1788    03     0.00044
+1788    04     0.00044
+1788    05     0.00044
+1788    06     0.00044
+1788    07     0.00044
+1788    08     0.00044
+1788    09     0.00044
+1788    10     0.00044
+1788    11     0.00044
+1788    12     0.00044
+1789    01     0.00044
+1789    02     0.00044
+1789    03     0.00044
+1789    04     0.00044
+1789    05     0.00044
+1789    06     0.00044
+1789    07     0.00044
+1789    08     0.00044
+1789    09     0.00044
+1789    10     0.00044
+1789    11     0.00044
+1789    12     0.00044
+1790    01     0.00044
+1790    02     0.00044
+1790    03     0.00044
+1790    04     0.00044
+1790    05     0.00044
+1790    06     0.00044
+1790    07     0.00044
+1790    08     0.00044
+1790    09     0.00044
+1790    10     0.00044
+1790    11     0.00044
+1790    12     0.00044
+1791    01     0.00049
+1791    02     0.00049
+1791    03     0.00049
+1791    04     0.00049
+1791    05     0.00049
+1791    06     0.00049
+1791    07     0.00049
+1791    08     0.00049
+1791    09     0.00049
+1791    10     0.00049
+1791    11     0.00049
+1791    12     0.00049
+1792    01     0.00050
+1792    02     0.00050
+1792    03     0.00050
+1792    04     0.00050
+1792    05     0.00050
+1792    06     0.00050
+1792    07     0.00050
+1792    08     0.00050
+1792    09     0.00050
+1792    10     0.00050
+1792    11     0.00050
+1792    12     0.00050
+1793    01     0.00050
+1793    02     0.00050
+1793    03     0.00050
+1793    04     0.00050
+1793    05     0.00050
+1793    06     0.00050
+1793    07     0.00050
+1793    08     0.00050
+1793    09     0.00050
+1793    10     0.00050
+1793    11     0.00050
+1793    12     0.00050
+1794    01     0.00050
+1794    02     0.00050
+1794    03     0.00050
+1794    04     0.00050
+1794    05     0.00050
+1794    06     0.00050
+1794    07     0.00050
+1794    08     0.00050
+1794    09     0.00050
+1794    10     0.00050
+1794    11     0.00050
+1794    12     0.00050
+1795    01     0.00050
+1795    02     0.00050
+1795    03     0.00050
+1795    04     0.00050
+1795    05     0.00050
+1795    06     0.00050
+1795    07     0.00050
+1795    08     0.00050
+1795    09     0.00050
+1795    10     0.00050
+1795    11     0.00050
+1795    12     0.00050
+1796    01     0.00052
+1796    02     0.00052
+1796    03     0.00052
+1796    04     0.00052
+1796    05     0.00052
+1796    06     0.00052
+1796    07     0.00052
+1796    08     0.00052
+1796    09     0.00052
+1796    10     0.00052
+1796    11     0.00052
+1796    12     0.00052
+1797    01     0.00055
+1797    02     0.00055
+1797    03     0.00055
+1797    04     0.00055
+1797    05     0.00055
+1797    06     0.00055
+1797    07     0.00055
+1797    08     0.00055
+1797    09     0.00055
+1797    10     0.00055
+1797    11     0.00055
+1797    12     0.00055
+1798    01     0.00057
+1798    02     0.00057
+1798    03     0.00057
+1798    04     0.00057
+1798    05     0.00057
+1798    06     0.00057
+1798    07     0.00057
+1798    08     0.00057
+1798    09     0.00057
+1798    10     0.00057
+1798    11     0.00057
+1798    12     0.00057
+1799    01     0.00060
+1799    02     0.00060
+1799    03     0.00060
+1799    04     0.00060
+1799    05     0.00060
+1799    06     0.00060
+1799    07     0.00060
+1799    08     0.00060
+1799    09     0.00060
+1799    10     0.00060
+1799    11     0.00060
+1799    12     0.00060
+1800    01     0.00064
+1800    02     0.00064
+1800    03     0.00064
+1800    04     0.00064
+1800    05     0.00064
+1800    06     0.00064
+1800    07     0.00064
+1800    08     0.00064
+1800    09     0.00064
+1800    10     0.00064
+1800    11     0.00064
+1800    12     0.00064
+1801    01     0.00064
+1801    02     0.00064
+1801    03     0.00064
+1801    04     0.00064
+1801    05     0.00064
+1801    06     0.00064
+1801    07     0.00064
+1801    08     0.00064
+1801    09     0.00064
+1801    10     0.00064
+1801    11     0.00064
+1801    12     0.00064
+1802    01     0.00084
+1802    02     0.00084
+1802    03     0.00084
+1802    04     0.00084
+1802    05     0.00084
+1802    06     0.00084
+1802    07     0.00084
+1802    08     0.00084
+1802    09     0.00084
+1802    10     0.00084
+1802    11     0.00084
+1802    12     0.00084
+1803    01     0.00072
+1803    02     0.00072
+1803    03     0.00072
+1803    04     0.00072
+1803    05     0.00072
+1803    06     0.00072
+1803    07     0.00072
+1803    08     0.00072
+1803    09     0.00072
+1803    10     0.00072
+1803    11     0.00072
+1803    12     0.00072
+1804    01     0.00078
+1804    02     0.00078
+1804    03     0.00078
+1804    04     0.00078
+1804    05     0.00078
+1804    06     0.00078
+1804    07     0.00078
+1804    08     0.00078
+1804    09     0.00078
+1804    10     0.00078
+1804    11     0.00078
+1804    12     0.00078
+1805    01     0.00076
+1805    02     0.00076
+1805    03     0.00076
+1805    04     0.00076
+1805    05     0.00076
+1805    06     0.00076
+1805    07     0.00076
+1805    08     0.00076
+1805    09     0.00076
+1805    10     0.00076
+1805    11     0.00076
+1805    12     0.00076
+1806    01     0.00080
+1806    02     0.00080
+1806    03     0.00080
+1806    04     0.00080
+1806    05     0.00080
+1806    06     0.00080
+1806    07     0.00080
+1806    08     0.00080
+1806    09     0.00080
+1806    10     0.00080
+1806    11     0.00080
+1806    12     0.00080
+1807    01     0.00084
+1807    02     0.00084
+1807    03     0.00084
+1807    04     0.00084
+1807    05     0.00084
+1807    06     0.00084
+1807    07     0.00084
+1807    08     0.00084
+1807    09     0.00084
+1807    10     0.00084
+1807    11     0.00084
+1807    12     0.00084
+1808    01     0.00080
+1808    02     0.00080
+1808    03     0.00080
+1808    04     0.00080
+1808    05     0.00080
+1808    06     0.00080
+1808    07     0.00080
+1808    08     0.00080
+1808    09     0.00080
+1808    10     0.00080
+1808    11     0.00080
+1808    12     0.00080
+1809    01     0.00080
+1809    02     0.00080
+1809    03     0.00080
+1809    04     0.00080
+1809    05     0.00080
+1809    06     0.00080
+1809    07     0.00080
+1809    08     0.00080
+1809    09     0.00080
+1809    10     0.00080
+1809    11     0.00080
+1809    12     0.00080
+1810    01     0.00085
+1810    02     0.00085
+1810    03     0.00085
+1810    04     0.00085
+1810    05     0.00085
+1810    06     0.00085
+1810    07     0.00085
+1810    08     0.00085
+1810    09     0.00085
+1810    10     0.00085
+1810    11     0.00085
+1810    12     0.00085
+1811    01     0.00090
+1811    02     0.00090
+1811    03     0.00090
+1811    04     0.00090
+1811    05     0.00090
+1811    06     0.00090
+1811    07     0.00090
+1811    08     0.00090
+1811    09     0.00090
+1811    10     0.00090
+1811    11     0.00090
+1811    12     0.00090
+1812    01     0.00093
+1812    02     0.00093
+1812    03     0.00093
+1812    04     0.00093
+1812    05     0.00093
+1812    06     0.00093
+1812    07     0.00093
+1812    08     0.00093
+1812    09     0.00093
+1812    10     0.00093
+1812    11     0.00093
+1812    12     0.00093
+1813    01     0.00094
+1813    02     0.00094
+1813    03     0.00094
+1813    04     0.00094
+1813    05     0.00094
+1813    06     0.00094
+1813    07     0.00094
+1813    08     0.00094
+1813    09     0.00094
+1813    10     0.00094
+1813    11     0.00094
+1813    12     0.00094
+1814    01     0.00096
+1814    02     0.00096
+1814    03     0.00096
+1814    04     0.00096
+1814    05     0.00096
+1814    06     0.00096
+1814    07     0.00096
+1814    08     0.00096
+1814    09     0.00096
+1814    10     0.00096
+1814    11     0.00096
+1814    12     0.00096
+1815    01     0.00099
+1815    02     0.00099
+1815    03     0.00099
+1815    04     0.00099
+1815    05     0.00099
+1815    06     0.00099
+1815    07     0.00099
+1815    08     0.00099
+1815    09     0.00099
+1815    10     0.00099
+1815    11     0.00099
+1815    12     0.00099
+1816    01     0.00108
+1816    02     0.00108
+1816    03     0.00108
+1816    04     0.00108
+1816    05     0.00108
+1816    06     0.00108
+1816    07     0.00108
+1816    08     0.00108
+1816    09     0.00108
+1816    10     0.00108
+1816    11     0.00108
+1816    12     0.00108
+1817    01     0.00112
+1817    02     0.00112
+1817    03     0.00112
+1817    04     0.00112
+1817    05     0.00112
+1817    06     0.00112
+1817    07     0.00112
+1817    08     0.00112
+1817    09     0.00112
+1817    10     0.00112
+1817    11     0.00112
+1817    12     0.00112
+1818    01     0.00113
+1818    02     0.00113
+1818    03     0.00113
+1818    04     0.00113
+1818    05     0.00113
+1818    06     0.00113
+1818    07     0.00113
+1818    08     0.00113
+1818    09     0.00113
+1818    10     0.00113
+1818    11     0.00113
+1818    12     0.00113
+1819    01     0.00114
+1819    02     0.00114
+1819    03     0.00114
+1819    04     0.00114
+1819    05     0.00114
+1819    06     0.00114
+1819    07     0.00114
+1819    08     0.00114
+1819    09     0.00114
+1819    10     0.00114
+1819    11     0.00114
+1819    12     0.00114
+1820    01     0.00115
+1820    02     0.00115
+1820    03     0.00115
+1820    04     0.00115
+1820    05     0.00115
+1820    06     0.00115
+1820    07     0.00115
+1820    08     0.00115
+1820    09     0.00115
+1820    10     0.00115
+1820    11     0.00115
+1820    12     0.00115
+1821    01     0.00117
+1821    02     0.00117
+1821    03     0.00117
+1821    04     0.00117
+1821    05     0.00117
+1821    06     0.00117
+1821    07     0.00117
+1821    08     0.00117
+1821    09     0.00117
+1821    10     0.00117
+1821    11     0.00117
+1821    12     0.00117
+1822    01     0.00122
+1822    02     0.00122
+1822    03     0.00122
+1822    04     0.00122
+1822    05     0.00122
+1822    06     0.00122
+1822    07     0.00122
+1822    08     0.00122
+1822    09     0.00122
+1822    10     0.00122
+1822    11     0.00122
+1822    12     0.00122
+1823    01     0.00129
+1823    02     0.00129
+1823    03     0.00129
+1823    04     0.00129
+1823    05     0.00129
+1823    06     0.00129
+1823    07     0.00129
+1823    08     0.00129
+1823    09     0.00129
+1823    10     0.00129
+1823    11     0.00129
+1823    12     0.00129
+1824    01     0.00133
+1824    02     0.00133
+1824    03     0.00133
+1824    04     0.00133
+1824    05     0.00133
+1824    06     0.00133
+1824    07     0.00133
+1824    08     0.00133
+1824    09     0.00133
+1824    10     0.00133
+1824    11     0.00133
+1824    12     0.00133
+1825    01     0.00138
+1825    02     0.00138
+1825    03     0.00138
+1825    04     0.00138
+1825    05     0.00138
+1825    06     0.00138
+1825    07     0.00138
+1825    08     0.00138
+1825    09     0.00138
+1825    10     0.00138
+1825    11     0.00138
+1825    12     0.00138
+1826    01     0.00140
+1826    02     0.00140
+1826    03     0.00140
+1826    04     0.00140
+1826    05     0.00140
+1826    06     0.00140
+1826    07     0.00140
+1826    08     0.00140
+1826    09     0.00140
+1826    10     0.00140
+1826    11     0.00140
+1826    12     0.00140
+1827    01     0.00150
+1827    02     0.00150
+1827    03     0.00150
+1827    04     0.00150
+1827    05     0.00150
+1827    06     0.00150
+1827    07     0.00150
+1827    08     0.00150
+1827    09     0.00150
+1827    10     0.00150
+1827    11     0.00150
+1827    12     0.00150
+1828    01     0.00152
+1828    02     0.00152
+1828    03     0.00152
+1828    04     0.00152
+1828    05     0.00152
+1828    06     0.00152
+1828    07     0.00152
+1828    08     0.00152
+1828    09     0.00152
+1828    10     0.00152
+1828    11     0.00152
+1828    12     0.00152
+1829    01     0.00151
+1829    02     0.00151
+1829    03     0.00151
+1829    04     0.00151
+1829    05     0.00151
+1829    06     0.00151
+1829    07     0.00151
+1829    08     0.00151
+1829    09     0.00151
+1829    10     0.00151
+1829    11     0.00151
+1829    12     0.00151
+1830    01     0.00203
+1830    02     0.00203
+1830    03     0.00203
+1830    04     0.00203
+1830    05     0.00203
+1830    06     0.00203
+1830    07     0.00203
+1830    08     0.00203
+1830    09     0.00203
+1830    10     0.00203
+1830    11     0.00203
+1830    12     0.00203
+1831    01     0.00192
+1831    02     0.00192
+1831    03     0.00192
+1831    04     0.00192
+1831    05     0.00192
+1831    06     0.00192
+1831    07     0.00192
+1831    08     0.00192
+1831    09     0.00192
+1831    10     0.00192
+1831    11     0.00192
+1831    12     0.00192
+1832    01     0.00194
+1832    02     0.00194
+1832    03     0.00194
+1832    04     0.00194
+1832    05     0.00194
+1832    06     0.00194
+1832    07     0.00194
+1832    08     0.00194
+1832    09     0.00194
+1832    10     0.00194
+1832    11     0.00194
+1832    12     0.00194
+1833    01     0.00197
+1833    02     0.00197
+1833    03     0.00197
+1833    04     0.00197
+1833    05     0.00197
+1833    06     0.00197
+1833    07     0.00197
+1833    08     0.00197
+1833    09     0.00197
+1833    10     0.00197
+1833    11     0.00197
+1833    12     0.00197
+1834    01     0.00201
+1834    02     0.00201
+1834    03     0.00201
+1834    04     0.00201
+1834    05     0.00201
+1834    06     0.00201
+1834    07     0.00201
+1834    08     0.00201
+1834    09     0.00201
+1834    10     0.00201
+1834    11     0.00201
+1834    12     0.00201
+1835    01     0.00206
+1835    02     0.00206
+1835    03     0.00206
+1835    04     0.00206
+1835    05     0.00206
+1835    06     0.00206
+1835    07     0.00206
+1835    08     0.00206
+1835    09     0.00206
+1835    10     0.00206
+1835    11     0.00206
+1835    12     0.00206
+1836    01     0.00238
+1836    02     0.00238
+1836    03     0.00238
+1836    04     0.00238
+1836    05     0.00238
+1836    06     0.00238
+1836    07     0.00238
+1836    08     0.00238
+1836    09     0.00238
+1836    10     0.00238
+1836    11     0.00238
+1836    12     0.00238
+1837    01     0.00238
+1837    02     0.00238
+1837    03     0.00238
+1837    04     0.00238
+1837    05     0.00238
+1837    06     0.00238
+1837    07     0.00238
+1837    08     0.00238
+1837    09     0.00238
+1837    10     0.00238
+1837    11     0.00238
+1837    12     0.00238
+1838    01     0.00246
+1838    02     0.00246
+1838    03     0.00246
+1838    04     0.00246
+1838    05     0.00246
+1838    06     0.00246
+1838    07     0.00246
+1838    08     0.00246
+1838    09     0.00246
+1838    10     0.00246
+1838    11     0.00246
+1838    12     0.00246
+1839    01     0.00254
+1839    02     0.00254
+1839    03     0.00254
+1839    04     0.00254
+1839    05     0.00254
+1839    06     0.00254
+1839    07     0.00254
+1839    08     0.00254
+1839    09     0.00254
+1839    10     0.00254
+1839    11     0.00254
+1839    12     0.00254
+1840    01     0.00271
+1840    02     0.00271
+1840    03     0.00271
+1840    04     0.00271
+1840    05     0.00271
+1840    06     0.00271
+1840    07     0.00271
+1840    08     0.00271
+1840    09     0.00271
+1840    10     0.00271
+1840    11     0.00271
+1840    12     0.00271
+1841    01     0.00279
+1841    02     0.00279
+1841    03     0.00279
+1841    04     0.00279
+1841    05     0.00279
+1841    06     0.00279
+1841    07     0.00279
+1841    08     0.00279
+1841    09     0.00279
+1841    10     0.00279
+1841    11     0.00279
+1841    12     0.00279
+1842    01     0.00295
+1842    02     0.00295
+1842    03     0.00295
+1842    04     0.00295
+1842    05     0.00295
+1842    06     0.00295
+1842    07     0.00295
+1842    08     0.00295
+1842    09     0.00295
+1842    10     0.00295
+1842    11     0.00295
+1842    12     0.00295
+1843    01     0.00302
+1843    02     0.00302
+1843    03     0.00302
+1843    04     0.00302
+1843    05     0.00302
+1843    06     0.00302
+1843    07     0.00302
+1843    08     0.00302
+1843    09     0.00302
+1843    10     0.00302
+1843    11     0.00302
+1843    12     0.00302
+1844    01     0.00322
+1844    02     0.00322
+1844    03     0.00322
+1844    04     0.00322
+1844    05     0.00322
+1844    06     0.00322
+1844    07     0.00322
+1844    08     0.00322
+1844    09     0.00322
+1844    10     0.00322
+1844    11     0.00322
+1844    12     0.00322
+1845    01     0.00353
+1845    02     0.00353
+1845    03     0.00353
+1845    04     0.00353
+1845    05     0.00353
+1845    06     0.00353
+1845    07     0.00353
+1845    08     0.00353
+1845    09     0.00353
+1845    10     0.00353
+1845    11     0.00353
+1845    12     0.00353
+1846    01     0.00359
+1846    02     0.00359
+1846    03     0.00359
+1846    04     0.00359
+1846    05     0.00359
+1846    06     0.00359
+1846    07     0.00359
+1846    08     0.00359
+1846    09     0.00359
+1846    10     0.00359
+1846    11     0.00359
+1846    12     0.00359
+1847    01     0.00392
+1847    02     0.00392
+1847    03     0.00392
+1847    04     0.00392
+1847    05     0.00392
+1847    06     0.00392
+1847    07     0.00392
+1847    08     0.00392
+1847    09     0.00392
+1847    10     0.00392
+1847    11     0.00392
+1847    12     0.00392
+1848    01     0.00395
+1848    02     0.00395
+1848    03     0.00395
+1848    04     0.00395
+1848    05     0.00395
+1848    06     0.00395
+1848    07     0.00395
+1848    08     0.00395
+1848    09     0.00395
+1848    10     0.00395
+1848    11     0.00395
+1848    12     0.00395
+1849    01     0.00417
+1849    02     0.00417
+1849    03     0.00417
+1849    04     0.00417
+1849    05     0.00417
+1849    06     0.00417
+1849    07     0.00417
+1849    08     0.00417
+1849    09     0.00417
+1849    10     0.00417
+1849    11     0.00417
+1849    12     0.00417
+1850    01     0.00448
+1850    02     0.00448
+1850    03     0.00448
+1850    04     0.00448
+1850    05     0.00448
+1850    06     0.00448
+1850    07     0.00448
+1850    08     0.00448
+1850    09     0.00448
+1850    10     0.00448
+1850    11     0.00448
+1850    12     0.00448
+1851    01     0.00452
+1851    02     0.00452
+1851    03     0.00452
+1851    04     0.00452
+1851    05     0.00452
+1851    06     0.00452
+1851    07     0.00452
+1851    08     0.00452
+1851    09     0.00452
+1851    10     0.00452
+1851    11     0.00452
+1851    12     0.00452
+1852    01     0.00472
+1852    02     0.00472
+1852    03     0.00472
+1852    04     0.00472
+1852    05     0.00472
+1852    06     0.00472
+1852    07     0.00472
+1852    08     0.00472
+1852    09     0.00472
+1852    10     0.00472
+1852    11     0.00472
+1852    12     0.00472
+1853    01     0.00494
+1853    02     0.00494
+1853    03     0.00494
+1853    04     0.00494
+1853    05     0.00494
+1853    06     0.00494
+1853    07     0.00494
+1853    08     0.00494
+1853    09     0.00494
+1853    10     0.00494
+1853    11     0.00494
+1853    12     0.00494
+1854    01     0.00580
+1854    02     0.00580
+1854    03     0.00580
+1854    04     0.00580
+1854    05     0.00580
+1854    06     0.00580
+1854    07     0.00580
+1854    08     0.00580
+1854    09     0.00580
+1854    10     0.00580
+1854    11     0.00580
+1854    12     0.00580
+1855    01     0.00592
+1855    02     0.00592
+1855    03     0.00592
+1855    04     0.00592
+1855    05     0.00592
+1855    06     0.00592
+1855    07     0.00592
+1855    08     0.00592
+1855    09     0.00592
+1855    10     0.00592
+1855    11     0.00592
+1855    12     0.00592
+1856    01     0.00631
+1856    02     0.00631
+1856    03     0.00631
+1856    04     0.00631
+1856    05     0.00631
+1856    06     0.00631
+1856    07     0.00631
+1856    08     0.00631
+1856    09     0.00631
+1856    10     0.00631
+1856    11     0.00631
+1856    12     0.00631
+1857    01     0.00637
+1857    02     0.00637
+1857    03     0.00637
+1857    04     0.00637
+1857    05     0.00637
+1857    06     0.00637
+1857    07     0.00637
+1857    08     0.00637
+1857    09     0.00637
+1857    10     0.00637
+1857    11     0.00637
+1857    12     0.00637
+1858    01     0.00646
+1858    02     0.00646
+1858    03     0.00646
+1858    04     0.00646
+1858    05     0.00646
+1858    06     0.00646
+1858    07     0.00646
+1858    08     0.00646
+1858    09     0.00646
+1858    10     0.00646
+1858    11     0.00646
+1858    12     0.00646
+1859    01     0.00685
+1859    02     0.00685
+1859    03     0.00685
+1859    04     0.00685
+1859    05     0.00685
+1859    06     0.00685
+1859    07     0.00685
+1859    08     0.00685
+1859    09     0.00685
+1859    10     0.00685
+1859    11     0.00685
+1859    12     0.00685
+1860    01     0.00752
+1860    02     0.00752
+1860    03     0.00752
+1860    04     0.00752
+1860    05     0.00752
+1860    06     0.00752
+1860    07     0.00752
+1860    08     0.00752
+1860    09     0.00752
+1860    10     0.00752
+1860    11     0.00752
+1860    12     0.00752
+1861    01     0.00791
+1861    02     0.00791
+1861    03     0.00791
+1861    04     0.00791
+1861    05     0.00791
+1861    06     0.00791
+1861    07     0.00791
+1861    08     0.00791
+1861    09     0.00791
+1861    10     0.00791
+1861    11     0.00791
+1861    12     0.00791
+1862    01     0.00805
+1862    02     0.00805
+1862    03     0.00805
+1862    04     0.00805
+1862    05     0.00805
+1862    06     0.00805
+1862    07     0.00805
+1862    08     0.00805
+1862    09     0.00805
+1862    10     0.00805
+1862    11     0.00805
+1862    12     0.00805
+1863    01     0.00860
+1863    02     0.00860
+1863    03     0.00860
+1863    04     0.00860
+1863    05     0.00860
+1863    06     0.00860
+1863    07     0.00860
+1863    08     0.00860
+1863    09     0.00860
+1863    10     0.00860
+1863    11     0.00860
+1863    12     0.00860
+1864    01     0.00926
+1864    02     0.00926
+1864    03     0.00926
+1864    04     0.00926
+1864    05     0.00926
+1864    06     0.00926
+1864    07     0.00926
+1864    08     0.00926
+1864    09     0.00926
+1864    10     0.00926
+1864    11     0.00926
+1864    12     0.00926
+1865    01     0.00983
+1865    02     0.00983
+1865    03     0.00983
+1865    04     0.00983
+1865    05     0.00983
+1865    06     0.00983
+1865    07     0.00983
+1865    08     0.00983
+1865    09     0.00983
+1865    10     0.00983
+1865    11     0.00983
+1865    12     0.00983
+1866    01     0.01014
+1866    02     0.01014
+1866    03     0.01014
+1866    04     0.01014
+1866    05     0.01014
+1866    06     0.01014
+1866    07     0.01014
+1866    08     0.01014
+1866    09     0.01014
+1866    10     0.01014
+1866    11     0.01014
+1866    12     0.01014
+1867    01     0.01087
+1867    02     0.01087
+1867    03     0.01087
+1867    04     0.01087
+1867    05     0.01087
+1867    06     0.01087
+1867    07     0.01087
+1867    08     0.01087
+1867    09     0.01087
+1867    10     0.01087
+1867    11     0.01087
+1867    12     0.01087
+1868    01     0.01116
+1868    02     0.01116
+1868    03     0.01116
+1868    04     0.01116
+1868    05     0.01116
+1868    06     0.01116
+1868    07     0.01116
+1868    08     0.01116
+1868    09     0.01116
+1868    10     0.01116
+1868    11     0.01116
+1868    12     0.01116
+1869    01     0.01185
+1869    02     0.01185
+1869    03     0.01185
+1869    04     0.01185
+1869    05     0.01185
+1869    06     0.01185
+1869    07     0.01185
+1869    08     0.01185
+1869    09     0.01185
+1869    10     0.01185
+1869    11     0.01185
+1869    12     0.01185
+1870    01     0.01211
+1870    02     0.01211
+1870    03     0.01211
+1870    04     0.01211
+1870    05     0.01211
+1870    06     0.01211
+1870    07     0.01211
+1870    08     0.01211
+1870    09     0.01211
+1870    10     0.01211
+1870    11     0.01211
+1870    12     0.01211
+1871    01     0.01288
+1871    02     0.01288
+1871    03     0.01288
+1871    04     0.01288
+1871    05     0.01288
+1871    06     0.01288
+1871    07     0.01288
+1871    08     0.01288
+1871    09     0.01288
+1871    10     0.01288
+1871    11     0.01288
+1871    12     0.01288
+1872    01     0.01425
+1872    02     0.01425
+1872    03     0.01425
+1872    04     0.01425
+1872    05     0.01425
+1872    06     0.01425
+1872    07     0.01425
+1872    08     0.01425
+1872    09     0.01425
+1872    10     0.01425
+1872    11     0.01425
+1872    12     0.01425
+1873    01     0.01513
+1873    02     0.01513
+1873    03     0.01513
+1873    04     0.01513
+1873    05     0.01513
+1873    06     0.01513
+1873    07     0.01513
+1873    08     0.01513
+1873    09     0.01513
+1873    10     0.01513
+1873    11     0.01513
+1873    12     0.01513
+1874    01     0.01417
+1874    02     0.01417
+1874    03     0.01417
+1874    04     0.01417
+1874    05     0.01417
+1874    06     0.01417
+1874    07     0.01417
+1874    08     0.01417
+1874    09     0.01417
+1874    10     0.01417
+1874    11     0.01417
+1874    12     0.01417
+1875    01     0.01537
+1875    02     0.01537
+1875    03     0.01537
+1875    04     0.01537
+1875    05     0.01537
+1875    06     0.01537
+1875    07     0.01537
+1875    08     0.01537
+1875    09     0.01537
+1875    10     0.01537
+1875    11     0.01537
+1875    12     0.01537
+1876    01     0.01559
+1876    02     0.01559
+1876    03     0.01559
+1876    04     0.01559
+1876    05     0.01559
+1876    06     0.01559
+1876    07     0.01559
+1876    08     0.01559
+1876    09     0.01559
+1876    10     0.01559
+1876    11     0.01559
+1876    12     0.01559
+1877    01     0.01590
+1877    02     0.01590
+1877    03     0.01590
+1877    04     0.01590
+1877    05     0.01590
+1877    06     0.01590
+1877    07     0.01590
+1877    08     0.01590
+1877    09     0.01590
+1877    10     0.01590
+1877    11     0.01590
+1877    12     0.01590
+1878    01     0.01602
+1878    02     0.01602
+1878    03     0.01602
+1878    04     0.01602
+1878    05     0.01602
+1878    06     0.01602
+1878    07     0.01602
+1878    08     0.01602
+1878    09     0.01602
+1878    10     0.01602
+1878    11     0.01602
+1878    12     0.01602
+1879    01     0.01717
+1879    02     0.01717
+1879    03     0.01717
+1879    04     0.01717
+1879    05     0.01717
+1879    06     0.01717
+1879    07     0.01717
+1879    08     0.01717
+1879    09     0.01717
+1879    10     0.01717
+1879    11     0.01717
+1879    12     0.01717
+1880    01     0.01942
+1880    02     0.01942
+1880    03     0.01942
+1880    04     0.01942
+1880    05     0.01942
+1880    06     0.01942
+1880    07     0.01942
+1880    08     0.01942
+1880    09     0.01942
+1880    10     0.01942
+1880    11     0.01942
+1880    12     0.01942
+1881    01     0.02007
+1881    02     0.02007
+1881    03     0.02007
+1881    04     0.02007
+1881    05     0.02007
+1881    06     0.02007
+1881    07     0.02007
+1881    08     0.02007
+1881    09     0.02007
+1881    10     0.02007
+1881    11     0.02007
+1881    12     0.02007
+1882    01     0.02120
+1882    02     0.02120
+1882    03     0.02120
+1882    04     0.02120
+1882    05     0.02120
+1882    06     0.02120
+1882    07     0.02120
+1882    08     0.02120
+1882    09     0.02120
+1882    10     0.02120
+1882    11     0.02120
+1882    12     0.02120
+1883    01     0.02255
+1883    02     0.02255
+1883    03     0.02255
+1883    04     0.02255
+1883    05     0.02255
+1883    06     0.02255
+1883    07     0.02255
+1883    08     0.02255
+1883    09     0.02255
+1883    10     0.02255
+1883    11     0.02255
+1883    12     0.02255
+1884    01     0.02280
+1884    02     0.02280
+1884    03     0.02280
+1884    04     0.02280
+1884    05     0.02280
+1884    06     0.02280
+1884    07     0.02280
+1884    08     0.02280
+1884    09     0.02280
+1884    10     0.02280
+1884    11     0.02280
+1884    12     0.02280
+1885    01     0.02297
+1885    02     0.02297
+1885    03     0.02297
+1885    04     0.02297
+1885    05     0.02297
+1885    06     0.02297
+1885    07     0.02297
+1885    08     0.02297
+1885    09     0.02297
+1885    10     0.02297
+1885    11     0.02297
+1885    12     0.02297
+1886    01     0.02333
+1886    02     0.02333
+1886    03     0.02333
+1886    04     0.02333
+1886    05     0.02333
+1886    06     0.02333
+1886    07     0.02333
+1886    08     0.02333
+1886    09     0.02333
+1886    10     0.02333
+1886    11     0.02333
+1886    12     0.02333
+1887    01     0.02450
+1887    02     0.02450
+1887    03     0.02450
+1887    04     0.02450
+1887    05     0.02450
+1887    06     0.02450
+1887    07     0.02450
+1887    08     0.02450
+1887    09     0.02450
+1887    10     0.02450
+1887    11     0.02450
+1887    12     0.02450
+1888    01     0.02712
+1888    02     0.02712
+1888    03     0.02712
+1888    04     0.02712
+1888    05     0.02712
+1888    06     0.02712
+1888    07     0.02712
+1888    08     0.02712
+1888    09     0.02712
+1888    10     0.02712
+1888    11     0.02712
+1888    12     0.02712
+1889    01     0.02711
+1889    02     0.02711
+1889    03     0.02711
+1889    04     0.02711
+1889    05     0.02711
+1889    06     0.02711
+1889    07     0.02711
+1889    08     0.02711
+1889    09     0.02711
+1889    10     0.02711
+1889    11     0.02711
+1889    12     0.02711
+1890    01     0.02954
+1890    02     0.02954
+1890    03     0.02954
+1890    04     0.02954
+1890    05     0.02954
+1890    06     0.02954
+1890    07     0.02954
+1890    08     0.02954
+1890    09     0.02954
+1890    10     0.02954
+1890    11     0.02954
+1890    12     0.02954
+1891    01     0.03092
+1891    02     0.03092
+1891    03     0.03092
+1891    04     0.03092
+1891    05     0.03092
+1891    06     0.03092
+1891    07     0.03092
+1891    08     0.03092
+1891    09     0.03092
+1891    10     0.03092
+1891    11     0.03092
+1891    12     0.03092
+1892    01     0.03117
+1892    02     0.03117
+1892    03     0.03117
+1892    04     0.03117
+1892    05     0.03117
+1892    06     0.03117
+1892    07     0.03117
+1892    08     0.03117
+1892    09     0.03117
+1892    10     0.03117
+1892    11     0.03117
+1892    12     0.03117
+1893    01     0.03080
+1893    02     0.03080
+1893    03     0.03080
+1893    04     0.03080
+1893    05     0.03080
+1893    06     0.03080
+1893    07     0.03080
+1893    08     0.03080
+1893    09     0.03080
+1893    10     0.03080
+1893    11     0.03080
+1893    12     0.03080
+1894    01     0.03187
+1894    02     0.03187
+1894    03     0.03187
+1894    04     0.03187
+1894    05     0.03187
+1894    06     0.03187
+1894    07     0.03187
+1894    08     0.03187
+1894    09     0.03187
+1894    10     0.03187
+1894    11     0.03187
+1894    12     0.03187
+1895    01     0.03380
+1895    02     0.03380
+1895    03     0.03380
+1895    04     0.03380
+1895    05     0.03380
+1895    06     0.03380
+1895    07     0.03380
+1895    08     0.03380
+1895    09     0.03380
+1895    10     0.03380
+1895    11     0.03380
+1895    12     0.03380
+1896    01     0.03490
+1896    02     0.03490
+1896    03     0.03490
+1896    04     0.03490
+1896    05     0.03490
+1896    06     0.03490
+1896    07     0.03490
+1896    08     0.03490
+1896    09     0.03490
+1896    10     0.03490
+1896    11     0.03490
+1896    12     0.03490
+1897    01     0.03655
+1897    02     0.03655
+1897    03     0.03655
+1897    04     0.03655
+1897    05     0.03655
+1897    06     0.03655
+1897    07     0.03655
+1897    08     0.03655
+1897    09     0.03655
+1897    10     0.03655
+1897    11     0.03655
+1897    12     0.03655
+1898    01     0.03855
+1898    02     0.03855
+1898    03     0.03855
+1898    04     0.03855
+1898    05     0.03855
+1898    06     0.03855
+1898    07     0.03855
+1898    08     0.03855
+1898    09     0.03855
+1898    10     0.03855
+1898    11     0.03855
+1898    12     0.03855
+1899    01     0.04212
+1899    02     0.04212
+1899    03     0.04212
+1899    04     0.04212
+1899    05     0.04212
+1899    06     0.04212
+1899    07     0.04212
+1899    08     0.04212
+1899    09     0.04212
+1899    10     0.04212
+1899    11     0.04212
+1899    12     0.04212
+1900    01     0.04443
+1900    02     0.04443
+1900    03     0.04443
+1900    04     0.04443
+1900    05     0.04443
+1900    06     0.04443
+1900    07     0.04443
+1900    08     0.04443
+1900    09     0.04443
+1900    10     0.04443
+1900    11     0.04443
+1900    12     0.04443
+1901    01     0.04590
+1901    02     0.04590
+1901    03     0.04590
+1901    04     0.04590
+1901    05     0.04590
+1901    06     0.04590
+1901    07     0.04590
+1901    08     0.04590
+1901    09     0.04590
+1901    10     0.04590
+1901    11     0.04590
+1901    12     0.04590
+1902    01     0.04706
+1902    02     0.04706
+1902    03     0.04706
+1902    04     0.04706
+1902    05     0.04706
+1902    06     0.04706
+1902    07     0.04706
+1902    08     0.04706
+1902    09     0.04706
+1902    10     0.04706
+1902    11     0.04706
+1902    12     0.04706
+1903    01     0.05134
+1903    02     0.05134
+1903    03     0.05134
+1903    04     0.05134
+1903    05     0.05134
+1903    06     0.05134
+1903    07     0.05134
+1903    08     0.05134
+1903    09     0.05134
+1903    10     0.05134
+1903    11     0.05134
+1903    12     0.05134
+1904    01     0.05188
+1904    02     0.05188
+1904    03     0.05188
+1904    04     0.05188
+1904    05     0.05188
+1904    06     0.05188
+1904    07     0.05188
+1904    08     0.05188
+1904    09     0.05188
+1904    10     0.05188
+1904    11     0.05188
+1904    12     0.05188
+1905    01     0.05524
+1905    02     0.05524
+1905    03     0.05524
+1905    04     0.05524
+1905    05     0.05524
+1905    06     0.05524
+1905    07     0.05524
+1905    08     0.05524
+1905    09     0.05524
+1905    10     0.05524
+1905    11     0.05524
+1905    12     0.05524
+1906    01     0.05802
+1906    02     0.05802
+1906    03     0.05802
+1906    04     0.05802
+1906    05     0.05802
+1906    06     0.05802
+1906    07     0.05802
+1906    08     0.05802
+1906    09     0.05802
+1906    10     0.05802
+1906    11     0.05802
+1906    12     0.05802
+1907    01     0.06561
+1907    02     0.06561
+1907    03     0.06561
+1907    04     0.06561
+1907    05     0.06561
+1907    06     0.06561
+1907    07     0.06561
+1907    08     0.06561
+1907    09     0.06561
+1907    10     0.06561
+1907    11     0.06561
+1907    12     0.06561
+1908    01     0.06313
+1908    02     0.06313
+1908    03     0.06313
+1908    04     0.06313
+1908    05     0.06313
+1908    06     0.06313
+1908    07     0.06313
+1908    08     0.06313
+1908    09     0.06313
+1908    10     0.06313
+1908    11     0.06313
+1908    12     0.06313
+1909    01     0.06562
+1909    02     0.06562
+1909    03     0.06562
+1909    04     0.06562
+1909    05     0.06562
+1909    06     0.06562
+1909    07     0.06562
+1909    08     0.06562
+1909    09     0.06562
+1909    10     0.06562
+1909    11     0.06562
+1909    12     0.06562
+1910    01     0.06882
+1910    02     0.06882
+1910    03     0.06882
+1910    04     0.06882
+1910    05     0.06882
+1910    06     0.06882
+1910    07     0.06882
+1910    08     0.06882
+1910    09     0.06882
+1910    10     0.06882
+1910    11     0.06882
+1910    12     0.06882
+1911    01     0.07008
+1911    02     0.07008
+1911    03     0.07008
+1911    04     0.07008
+1911    05     0.07008
+1911    06     0.07008
+1911    07     0.07008
+1911    08     0.07008
+1911    09     0.07008
+1911    10     0.07008
+1911    11     0.07008
+1911    12     0.07008
+1912    01     0.07339
+1912    02     0.07339
+1912    03     0.07339
+1912    04     0.07339
+1912    05     0.07339
+1912    06     0.07339
+1912    07     0.07339
+1912    08     0.07339
+1912    09     0.07339
+1912    10     0.07339
+1912    11     0.07339
+1912    12     0.07339
+1913    01     0.07941
+1913    02     0.07941
+1913    03     0.07941
+1913    04     0.07941
+1913    05     0.07941
+1913    06     0.07941
+1913    07     0.07941
+1913    08     0.07941
+1913    09     0.07941
+1913    10     0.07941
+1913    11     0.07941
+1913    12     0.07941
+1914    01     0.07205
+1914    02     0.07205
+1914    03     0.07205
+1914    04     0.07205
+1914    05     0.07205
+1914    06     0.07205
+1914    07     0.07205
+1914    08     0.07205
+1914    09     0.07205
+1914    10     0.07205
+1914    11     0.07205
+1914    12     0.07205
+1915    01     0.07108
+1915    02     0.07108
+1915    03     0.07108
+1915    04     0.07108
+1915    05     0.07108
+1915    06     0.07108
+1915    07     0.07108
+1915    08     0.07108
+1915    09     0.07108
+1915    10     0.07108
+1915    11     0.07108
+1915    12     0.07108
+1916    01     0.07670
+1916    02     0.07670
+1916    03     0.07670
+1916    04     0.07670
+1916    05     0.07670
+1916    06     0.07670
+1916    07     0.07670
+1916    08     0.07670
+1916    09     0.07670
+1916    10     0.07670
+1916    11     0.07670
+1916    12     0.07670
+1917    01     0.08025
+1917    02     0.08025
+1917    03     0.08025
+1917    04     0.08025
+1917    05     0.08025
+1917    06     0.08025
+1917    07     0.08025
+1917    08     0.08025
+1917    09     0.08025
+1917    10     0.08025
+1917    11     0.08025
+1917    12     0.08025
+1918    01     0.07916
+1918    02     0.07916
+1918    03     0.07916
+1918    04     0.07916
+1918    05     0.07916
+1918    06     0.07916
+1918    07     0.07916
+1918    08     0.07916
+1918    09     0.07916
+1918    10     0.07916
+1918    11     0.07916
+1918    12     0.07916
+1919    01     0.06861
+1919    02     0.06861
+1919    03     0.06861
+1919    04     0.06861
+1919    05     0.06861
+1919    06     0.06861
+1919    07     0.06861
+1919    08     0.06861
+1919    09     0.06861
+1919    10     0.06861
+1919    11     0.06861
+1919    12     0.06861
+1920    01     0.07978
+1920    02     0.07978
+1920    03     0.07978
+1920    04     0.07978
+1920    05     0.07978
+1920    06     0.07978
+1920    07     0.07978
+1920    08     0.07978
+1920    09     0.07978
+1920    10     0.07978
+1920    11     0.07978
+1920    12     0.07978
+1921    01     0.07000
+1921    02     0.07000
+1921    03     0.07000
+1921    04     0.07000
+1921    05     0.07000
+1921    06     0.07000
+1921    07     0.07000
+1921    08     0.07000
+1921    09     0.07000
+1921    10     0.07000
+1921    11     0.07000
+1921    12     0.07000
+1922    01     0.07340
+1922    02     0.07340
+1922    03     0.07340
+1922    04     0.07340
+1922    05     0.07340
+1922    06     0.07340
+1922    07     0.07340
+1922    08     0.07340
+1922    09     0.07340
+1922    10     0.07340
+1922    11     0.07340
+1922    12     0.07340
+1923    01     0.08328
+1923    02     0.08328
+1923    03     0.08328
+1923    04     0.08328
+1923    05     0.08328
+1923    06     0.08328
+1923    07     0.08328
+1923    08     0.08328
+1923    09     0.08328
+1923    10     0.08328
+1923    11     0.08328
+1923    12     0.08328
+1924    01     0.08355
+1924    02     0.08355
+1924    03     0.08355
+1924    04     0.08355
+1924    05     0.08355
+1924    06     0.08355
+1924    07     0.08355
+1924    08     0.08355
+1924    09     0.08355
+1924    10     0.08355
+1924    11     0.08355
+1924    12     0.08355
+1925    01     0.08413
+1925    02     0.08413
+1925    03     0.08413
+1925    04     0.08413
+1925    05     0.08413
+1925    06     0.08413
+1925    07     0.08413
+1925    08     0.08413
+1925    09     0.08413
+1925    10     0.08413
+1925    11     0.08413
+1925    12     0.08413
+1926    01     0.08283
+1926    02     0.08283
+1926    03     0.08283
+1926    04     0.08283
+1926    05     0.08283
+1926    06     0.08283
+1926    07     0.08283
+1926    08     0.08283
+1926    09     0.08283
+1926    10     0.08283
+1926    11     0.08283
+1926    12     0.08283
+1927    01     0.09046
+1927    02     0.09046
+1927    03     0.09046
+1927    04     0.09046
+1927    05     0.09046
+1927    06     0.09046
+1927    07     0.09046
+1927    08     0.09046
+1927    09     0.09046
+1927    10     0.09046
+1927    11     0.09046
+1927    12     0.09046
+1928    01     0.09077
+1928    02     0.09077
+1928    03     0.09077
+1928    04     0.09077
+1928    05     0.09077
+1928    06     0.09077
+1928    07     0.09077
+1928    08     0.09077
+1928    09     0.09077
+1928    10     0.09077
+1928    11     0.09077
+1928    12     0.09077
+1929    01     0.09759
+1929    02     0.09759
+1929    03     0.09759
+1929    04     0.09759
+1929    05     0.09759
+1929    06     0.09759
+1929    07     0.09759
+1929    08     0.09759
+1929    09     0.09759
+1929    10     0.09759
+1929    11     0.09759
+1929    12     0.09759
+1930    01     0.09022
+1930    02     0.09022
+1930    03     0.09022
+1930    04     0.09022
+1930    05     0.09022
+1930    06     0.09022
+1930    07     0.09022
+1930    08     0.09022
+1930    09     0.09022
+1930    10     0.09022
+1930    11     0.09022
+1930    12     0.09022
+1931    01     0.08058
+1931    02     0.08058
+1931    03     0.08058
+1931    04     0.08058
+1931    05     0.08058
+1931    06     0.08058
+1931    07     0.08058
+1931    08     0.08058
+1931    09     0.08058
+1931    10     0.08058
+1931    11     0.08058
+1931    12     0.08058
+1932    01     0.07270
+1932    02     0.07270
+1932    03     0.07270
+1932    04     0.07270
+1932    05     0.07270
+1932    06     0.07270
+1932    07     0.07270
+1932    08     0.07270
+1932    09     0.07270
+1932    10     0.07270
+1932    11     0.07270
+1932    12     0.07270
+1933    01     0.07655
+1933    02     0.07655
+1933    03     0.07655
+1933    04     0.07655
+1933    05     0.07655
+1933    06     0.07655
+1933    07     0.07655
+1933    08     0.07655
+1933    09     0.07655
+1933    10     0.07655
+1933    11     0.07655
+1933    12     0.07655
+1934    01     0.08328
+1934    02     0.08328
+1934    03     0.08328
+1934    04     0.08328
+1934    05     0.08328
+1934    06     0.08328
+1934    07     0.08328
+1934    08     0.08328
+1934    09     0.08328
+1934    10     0.08328
+1934    11     0.08328
+1934    12     0.08328
+1935    01     0.08748
+1935    02     0.08748
+1935    03     0.08748
+1935    04     0.08748
+1935    05     0.08748
+1935    06     0.08748
+1935    07     0.08748
+1935    08     0.08748
+1935    09     0.08748
+1935    10     0.08748
+1935    11     0.08748
+1935    12     0.08748
+1936    01     0.09606
+1936    02     0.09606
+1936    03     0.09606
+1936    04     0.09606
+1936    05     0.09606
+1936    06     0.09606
+1936    07     0.09606
+1936    08     0.09606
+1936    09     0.09606
+1936    10     0.09606
+1936    11     0.09606
+1936    12     0.09606
+1937    01     0.10287
+1937    02     0.10287
+1937    03     0.10287
+1937    04     0.10287
+1937    05     0.10287
+1937    06     0.10287
+1937    07     0.10287
+1937    08     0.10287
+1937    09     0.10287
+1937    10     0.10287
+1937    11     0.10287
+1937    12     0.10287
+1938    01     0.09700
+1938    02     0.09700
+1938    03     0.09700
+1938    04     0.09700
+1938    05     0.09700
+1938    06     0.09700
+1938    07     0.09700
+1938    08     0.09700
+1938    09     0.09700
+1938    10     0.09700
+1938    11     0.09700
+1938    12     0.09700
+1939    01     0.10242
+1939    02     0.10242
+1939    03     0.10242
+1939    04     0.10242
+1939    05     0.10242
+1939    06     0.10242
+1939    07     0.10242
+1939    08     0.10242
+1939    09     0.10242
+1939    10     0.10242
+1939    11     0.10242
+1939    12     0.10242
+1940    01     0.11154
+1940    02     0.11154
+1940    03     0.11154
+1940    04     0.11154
+1940    05     0.11154
+1940    06     0.11154
+1940    07     0.11154
+1940    08     0.11154
+1940    09     0.11154
+1940    10     0.11154
+1940    11     0.11154
+1940    12     0.11154
+1941    01     0.11428
+1941    02     0.11428
+1941    03     0.11428
+1941    04     0.11428
+1941    05     0.11428
+1941    06     0.11428
+1941    07     0.11428
+1941    08     0.11428
+1941    09     0.11428
+1941    10     0.11428
+1941    11     0.11428
+1941    12     0.11428
+1942    01     0.11463
+1942    02     0.11463
+1942    03     0.11463
+1942    04     0.11463
+1942    05     0.11463
+1942    06     0.11463
+1942    07     0.11463
+1942    08     0.11463
+1942    09     0.11463
+1942    10     0.11463
+1942    11     0.11463
+1942    12     0.11463
+1943    01     0.11864
+1943    02     0.11864
+1943    03     0.11864
+1943    04     0.11864
+1943    05     0.11864
+1943    06     0.11864
+1943    07     0.11864
+1943    08     0.11864
+1943    09     0.11864
+1943    10     0.11864
+1943    11     0.11864
+1943    12     0.11864
+1944    01     0.11784
+1944    02     0.11784
+1944    03     0.11784
+1944    04     0.11784
+1944    05     0.11784
+1944    06     0.11784
+1944    07     0.11784
+1944    08     0.11784
+1944    09     0.11784
+1944    10     0.11784
+1944    11     0.11784
+1944    12     0.11784
+1945    01     0.09856
+1945    02     0.09856
+1945    03     0.09856
+1945    04     0.09856
+1945    05     0.09856
+1945    06     0.09856
+1945    07     0.09856
+1945    08     0.09856
+1945    09     0.09856
+1945    10     0.09856
+1945    11     0.09856
+1945    12     0.09856
+1946    01     0.10759
+1946    02     0.10759
+1946    03     0.10759
+1946    04     0.10759
+1946    05     0.10759
+1946    06     0.10759
+1946    07     0.10759
+1946    08     0.10759
+1946    09     0.10759
+1946    10     0.10759
+1946    11     0.10759
+1946    12     0.10759
+1947    01     0.11910
+1947    02     0.11910
+1947    03     0.11910
+1947    04     0.11910
+1947    05     0.11910
+1947    06     0.11910
+1947    07     0.11910
+1947    08     0.11910
+1947    09     0.11910
+1947    10     0.11910
+1947    11     0.11910
+1947    12     0.11910
+1948    01     0.12530
+1948    02     0.12530
+1948    03     0.12530
+1948    04     0.12530
+1948    05     0.12530
+1948    06     0.12530
+1948    07     0.12530
+1948    08     0.12530
+1948    09     0.12530
+1948    10     0.12530
+1948    11     0.12530
+1948    12     0.12530
+1949    01     0.11929
+1949    02     0.11929
+1949    03     0.11929
+1949    04     0.11929
+1949    05     0.11929
+1949    06     0.11929
+1949    07     0.11929
+1949    08     0.11929
+1949    09     0.11929
+1949    10     0.11929
+1949    11     0.11929
+1949    12     0.11929
+1950    01     0.14254
+1950    02     0.13288
+1950    03     0.13844
+1950    04     0.12547
+1950    05     0.12480
+1950    06     0.12823
+1950    07     0.12979
+1950    08     0.12872
+1950    09     0.12622
+1950    10     0.13000
+1950    11     0.13141
+1950    12     0.14217
+1951    01     0.15935
+1951    02     0.14657
+1951    03     0.14810
+1951    04     0.13441
+1951    05     0.13222
+1951    06     0.13027
+1951    07     0.13662
+1951    08     0.13652
+1951    09     0.13530
+1951    10     0.14132
+1951    11     0.14085
+1951    12     0.15794
+1952    01     0.15159
+1952    02     0.14263
+1952    03     0.14879
+1952    04     0.13765
+1952    05     0.13726
+1952    06     0.13673
+1952    07     0.14019
+1952    08     0.14205
+1952    09     0.13916
+1952    10     0.14501
+1952    11     0.14389
+1952    12     0.15748
+1953    01     0.16150
+1953    02     0.15130
+1953    03     0.15798
+1953    04     0.14264
+1953    05     0.13798
+1953    06     0.13900
+1953    07     0.14448
+1953    08     0.14201
+1953    09     0.13874
+1953    10     0.14631
+1953    11     0.14672
+1953    12     0.16165
+1954    01     0.16274
+1954    02     0.14824
+1954    03     0.15601
+1954    04     0.14747
+1954    05     0.14321
+1954    06     0.14364
+1954    07     0.14835
+1954    08     0.14551
+1954    09     0.14580
+1954    10     0.14966
+1954    11     0.15296
+1954    12     0.16570
+1955    01     0.17489
+1955    02     0.16066
+1955    03     0.17040
+1955    04     0.15916
+1955    05     0.15753
+1955    06     0.15754
+1955    07     0.16206
+1955    08     0.16271
+1955    09     0.15875
+1955    10     0.16526
+1955    11     0.16975
+1955    12     0.18225
+1956    01     0.19891
+1956    02     0.17797
+1956    03     0.18326
+1956    04     0.16506
+1956    05     0.16554
+1956    06     0.16120
+1956    07     0.16987
+1956    08     0.16807
+1956    09     0.16650
+1956    10     0.17674
+1956    11     0.18014
+1956    12     0.19515
+1957    01     0.19233
+1957    02     0.17574
+1957    03     0.18620
+1957    04     0.17130
+1957    05     0.17455
+1957    06     0.17333
+1957    07     0.17941
+1957    08     0.17922
+1957    09     0.17465
+1957    10     0.18372
+1957    11     0.18318
+1957    12     0.20018
+1958    01     0.20399
+1958    02     0.18578
+1958    03     0.19684
+1958    04     0.18037
+1958    05     0.17910
+1958    06     0.17435
+1958    07     0.17993
+1958    08     0.18173
+1958    09     0.17834
+1958    10     0.18602
+1958    11     0.18856
+1958    12     0.20723
+1959    01     0.21650
+1959    02     0.19742
+1959    03     0.20628
+1959    04     0.19101
+1959    05     0.18853
+1959    06     0.18435
+1959    07     0.19125
+1959    08     0.19295
+1959    09     0.18788
+1959    10     0.19829
+1959    11     0.19904
+1959    12     0.21414
+1960    01     0.22003
+1960    02     0.20343
+1960    03     0.21871
+1960    04     0.20098
+1960    05     0.19659
+1960    06     0.19821
+1960    07     0.20283
+1960    08     0.20263
+1960    09     0.19895
+1960    10     0.20842
+1960    11     0.21132
+1960    12     0.23226
+1961    01     0.22145
+1961    02     0.20501
+1961    03     0.21897
+1961    04     0.20044
+1961    05     0.19788
+1961    06     0.19739
+1961    07     0.20320
+1961    08     0.20298
+1961    09     0.19990
+1961    10     0.20913
+1961    11     0.20972
+1961    12     0.23262
+1962    01     0.23263
+1962    02     0.21447
+1962    03     0.23114
+1962    04     0.20856
+1962    05     0.20389
+1962    06     0.20513
+1962    07     0.20702
+1962    08     0.21062
+1962    09     0.20466
+1962    10     0.21275
+1962    11     0.21745
+1962    12     0.23897
+1963    01     0.25173
+1963    02     0.22890
+1963    03     0.23960
+1963    04     0.21975
+1963    05     0.21415
+1963    06     0.21508
+1963    07     0.21858
+1963    08     0.21936
+1963    09     0.21833
+1963    10     0.22966
+1963    11     0.22872
+1963    12     0.25001
+1964    01     0.26367
+1964    02     0.23907
+1964    03     0.24564
+1964    04     0.23033
+1964    05     0.22285
+1964    06     0.22690
+1964    07     0.23369
+1964    08     0.23105
+1964    09     0.23182
+1964    10     0.24116
+1964    11     0.24041
+1964    12     0.26380
+1965    01     0.26961
+1965    02     0.24919
+1965    03     0.26443
+1965    04     0.24103
+1965    05     0.23849
+1965    06     0.23922
+1965    07     0.24427
+1965    08     0.24589
+1965    09     0.24054
+1965    10     0.25083
+1965    11     0.25314
+1965    12     0.26931
+1966    01     0.27757
+1966    02     0.26156
+1966    03     0.27639
+1966    04     0.25299
+1966    05     0.24907
+1966    06     0.25045
+1966    07     0.25721
+1966    08     0.25819
+1966    09     0.25031
+1966    10     0.25803
+1966    11     0.26634
+1966    12     0.28588
+1967    01     0.29057
+1967    02     0.26854
+1967    03     0.28371
+1967    04     0.26214
+1967    05     0.25662
+1967    06     0.25731
+1967    07     0.26185
+1967    08     0.26429
+1967    09     0.26004
+1967    10     0.27074
+1967    11     0.27184
+1967    12     0.29417
+1968    01     0.30937
+1968    02     0.28586
+1968    03     0.29983
+1968    04     0.27441
+1968    05     0.27032
+1968    06     0.27244
+1968    07     0.27511
+1968    08     0.27604
+1968    09     0.27467
+1968    10     0.28513
+1968    11     0.28733
+1968    12     0.31106
+1969    01     0.32687
+1969    02     0.30360
+1969    03     0.31995
+1969    04     0.29428
+1969    05     0.28947
+1969    06     0.29128
+1969    07     0.29507
+1969    08     0.29676
+1969    09     0.29160
+1969    10     0.30338
+1969    11     0.30576
+1969    12     0.33040
+1970    01     0.35044
+1970    02     0.32520
+1970    03     0.34326
+1970    04     0.32017
+1970    05     0.31528
+1970    06     0.31787
+1970    07     0.32351
+1970    08     0.32331
+1970    09     0.31418
+1970    10     0.32918
+1970    11     0.33251
+1970    12     0.35981
+1971    01     0.36660
+1971    02     0.33850
+1971    03     0.35976
+1971    04     0.33200
+1971    05     0.32836
+1971    06     0.32665
+1971    07     0.33442
+1971    08     0.33709
+1971    09     0.32410
+1971    10     0.34196
+1971    11     0.34696
+1971    12     0.37605
+1972    01     0.37912
+1972    02     0.35696
+1972    03     0.37960
+1972    04     0.34507
+1972    05     0.34246
+1972    06     0.34484
+1972    07     0.35058
+1972    08     0.35603
+1972    09     0.34233
+1972    10     0.35530
+1972    11     0.35720
+1972    12     0.39016
+1973    01     0.39642
+1973    02     0.37592
+1973    03     0.40179
+1973    04     0.36549
+1973    05     0.36229
+1973    06     0.36406
+1973    07     0.36994
+1973    08     0.37289
+1973    09     0.36206
+1973    10     0.37974
+1973    11     0.38227
+1973    12     0.41065
+1974    01     0.40205
+1974    02     0.37961
+1974    03     0.39627
+1974    04     0.36430
+1974    05     0.35815
+1974    06     0.35885
+1974    07     0.36762
+1974    08     0.36800
+1974    09     0.36202
+1974    10     0.37656
+1974    11     0.38110
+1974    12     0.41320
+1975    01     0.40312
+1975    02     0.37405
+1975    03     0.39671
+1975    04     0.36505
+1975    05     0.35863
+1975    06     0.35880
+1975    07     0.36848
+1975    08     0.37240
+1975    09     0.35946
+1975    10     0.37848
+1975    11     0.38342
+1975    12     0.41149
+1976    01     0.42405
+1976    02     0.39429
+1976    03     0.41667
+1976    04     0.38470
+1976    05     0.38014
+1976    06     0.37740
+1976    07     0.38619
+1976    08     0.39273
+1976    09     0.37698
+1976    10     0.40133
+1976    11     0.40265
+1976    12     0.44093
+1977    01     0.43427
+1977    02     0.40397
+1977    03     0.42718
+1977    04     0.39226
+1977    05     0.38731
+1977    06     0.39141
+1977    07     0.39709
+1977    08     0.39983
+1977    09     0.39052
+1977    10     0.41031
+1977    11     0.41519
+1977    12     0.45146
+1978    01     0.45106
+1978    02     0.41714
+1978    03     0.44740
+1978    04     0.41410
+1978    05     0.40291
+1978    06     0.40450
+1978    07     0.41344
+1978    08     0.41321
+1978    09     0.40805
+1978    10     0.42730
+1978    11     0.42823
+1978    12     0.46653
+1979    01     0.46495
+1979    02     0.42913
+1979    03     0.45497
+1979    04     0.42205
+1979    05     0.41534
+1979    06     0.41431
+1979    07     0.42716
+1979    08     0.42901
+1979    09     0.42001
+1979    10     0.43717
+1979    11     0.43900
+1979    12     0.47400
+1980    01     0.46589
+1980    02     0.42724
+1980    03     0.45960
+1980    04     0.42578
+1980    05     0.41192
+1980    06     0.41260
+1980    07     0.41933
+1980    08     0.42124
+1980    09     0.41393
+1980    10     0.43051
+1980    11     0.43968
+1980    12     0.47852
+1981    01     0.45338
+1981    02     0.41805
+1981    03     0.44170
+1981    04     0.40981
+1981    05     0.40115
+1981    06     0.40423
+1981    07     0.41149
+1981    08     0.41173
+1981    09     0.40181
+1981    10     0.42606
+1981    11     0.42592
+1981    12     0.46301
+1982    01     0.45253
+1982    02     0.41620
+1982    03     0.44602
+1982    04     0.40994
+1982    05     0.40217
+1982    06     0.40362
+1982    07     0.40991
+1982    08     0.41227
+1982    09     0.40062
+1982    10     0.41919
+1982    11     0.42760
+1982    12     0.45191
+1983    01     0.44717
+1983    02     0.41003
+1983    03     0.44927
+1983    04     0.41086
+1983    05     0.40281
+1983    06     0.40599
+1983    07     0.41005
+1983    08     0.42237
+1983    09     0.40992
+1983    10     0.42786
+1983    11     0.43369
+1983    12     0.47775
+1984    01     0.46924
+1984    02     0.43782
+1984    03     0.46739
+1984    04     0.42628
+1984    05     0.42004
+1984    06     0.41940
+1984    07     0.42130
+1984    08     0.43029
+1984    09     0.41423
+1984    10     0.43852
+1984    11     0.44366
+1984    12     0.46897
+1985    01     0.49039
+1985    02     0.45125
+1985    03     0.47511
+1985    04     0.43721
+1985    05     0.42990
+1985    06     0.42791
+1985    07     0.43784
+1985    08     0.44033
+1985    09     0.43260
+1985    10     0.45930
+1985    11     0.45762
+1985    12     0.50171
+1986    01     0.49250
+1986    02     0.45605
+1986    03     0.48126
+1986    04     0.44691
+1986    05     0.43774
+1986    06     0.43678
+1986    07     0.45002
+1986    08     0.44552
+1986    09     0.43707
+1986    10     0.46278
+1986    11     0.46216
+1986    12     0.50839
+1987    01     0.50518
+1987    02     0.46531
+1987    03     0.49902
+1987    04     0.45700
+1987    05     0.44995
+1987    06     0.45930
+1987    07     0.46630
+1987    08     0.46879
+1987    09     0.45651
+1987    10     0.48036
+1987    11     0.47931
+1987    12     0.52508
+1988    01     0.52287
+1988    02     0.49020
+1988    03     0.52344
+1988    04     0.47681
+1988    05     0.46679
+1988    06     0.47468
+1988    07     0.47848
+1988    08     0.48788
+1988    09     0.46872
+1988    10     0.49329
+1988    11     0.50313
+1988    12     0.54784
+1989    01     0.52160
+1989    02     0.48900
+1989    03     0.52893
+1989    04     0.48100
+1989    05     0.47522
+1989    06     0.47870
+1989    07     0.48225
+1989    08     0.49235
+1989    09     0.47963
+1989    10     0.50682
+1989    11     0.51321
+1989    12     0.56321
+1990    01     0.52825
+1990    02     0.48003
+1990    03     0.52435
+1990    04     0.48222
+1990    05     0.47486
+1990    06     0.47687
+1990    07     0.48079
+1990    08     0.49310
+1990    09     0.47797
+1990    10     0.50034
+1990    11     0.50422
+1990    12     0.54897
+1991    01     0.54627
+1991    02     0.50384
+1991    03     0.54382
+1991    04     0.50221
+1991    05     0.49971
+1991    06     0.49047
+1991    07     0.49777
+1991    08     0.49794
+1991    09     0.48224
+1991    10     0.51357
+1991    11     0.51524
+1991    12     0.55837
+1992    01     0.53393
+1992    02     0.49643
+1992    03     0.52687
+1992    04     0.48699
+1992    05     0.47703
+1992    06     0.47369
+1992    07     0.48599
+1992    08     0.48282
+1992    09     0.47853
+1992    10     0.50745
+1992    11     0.51389
+1992    12     0.55485
+1993    01     0.52888
+1993    02     0.50462
+1993    03     0.54321
+1993    04     0.49169
+1993    05     0.47737
+1993    06     0.48059
+1993    07     0.49303
+1993    08     0.49487
+1993    09     0.48453
+1993    10     0.51108
+1993    11     0.52403
+1993    12     0.56392
+1994    01     0.54106
+1994    02     0.50750
+1994    03     0.53564
+1994    04     0.49246
+1994    05     0.48723
+1994    06     0.48884
+1994    07     0.49166
+1994    08     0.50242
+1994    09     0.48732
+1994    10     0.51256
+1994    11     0.51646
+1994    12     0.55960
+1995    01     0.54184
+1995    02     0.51069
+1995    03     0.54924
+1995    04     0.49775
+1995    05     0.50171
+1995    06     0.49361
+1995    07     0.50327
+1995    08     0.51184
+1995    09     0.49449
+1995    10     0.51557
+1995    11     0.53151
+1995    12     0.58021
+1996    01     0.56457
+1996    02     0.53318
+1996    03     0.56069
+1996    04     0.51202
+1996    05     0.51159
+1996    06     0.50331
+1996    07     0.51931
+1996    08     0.52037
+1996    09     0.50864
+1996    10     0.53560
+1996    11     0.54387
+1996    12     0.58743
+1997    01     0.56862
+1997    02     0.51754
+1997    03     0.55221
+1997    04     0.51650
+1997    05     0.51358
+1997    06     0.50622
+1997    07     0.52732
+1997    08     0.52530
+1997    09     0.51648
+1997    10     0.54894
+1997    11     0.54996
+1997    12     0.59650
+1998    01     0.55336
+1998    02     0.51716
+1998    03     0.55550
+1998    04     0.50978
+1998    05     0.50603
+1998    06     0.50691
+1998    07     0.51977
+1998    08     0.51804
+1998    09     0.50830
+1998    10     0.52917
+1998    11     0.53637
+1998    12     0.58201
+1999    01     0.55720
+1999    02     0.51202
+1999    03     0.55864
+1999    04     0.51028
+1999    05     0.50580
+1999    06     0.50608
+1999    07     0.51848
+1999    08     0.52092
+1999    09     0.50601
+1999    10     0.52726
+1999    11     0.53895
+1999    12     0.58005
+2000    01     0.57314
+2000    02     0.55079
+2000    03     0.57086
+2000    04     0.51994
+2000    05     0.52341
+2000    06     0.52229
+2000    07     0.52676
+2000    08     0.54093
+2000    09     0.52664
+2000    10     0.54410
+2000    11     0.55450
+2000    12     0.60297
+2001    01     0.58647
+2001    02     0.54321
+2001    03     0.58069
+2001    04     0.53177
+2001    05     0.53513
+2001    06     0.52555
+2001    07     0.53887
+2001    08     0.54453
+2001    09     0.52289
+2001    10     0.54891
+2001    11     0.55360
+2001    12     0.59173
+2002    01     0.59298
+2002    02     0.54028
+2002    03     0.57896
+2002    04     0.53894
+2002    05     0.53658
+2002    06     0.53557
+2002    07     0.55276
+2002    08     0.55043
+2002    09     0.53663
+2002    10     0.57000
+2002    11     0.57302
+2002    12     0.61363
+2003    01     0.62731
+2003    02     0.58055
+2003    03     0.60857
+2003    04     0.56092
+2003    05     0.55414
+2003    06     0.55420
+2003    07     0.56987
+2003    08     0.57205
+2003    09     0.55958
+2003    10     0.59610
+2003    11     0.60060
+2003    12     0.65321
+2004    01     0.64882
+2004    02     0.61456
+2004    03     0.64419
+2004    04     0.59265
+2004    05     0.58759
+2004    06     0.58463
+2004    07     0.59878
+2004    08     0.59835
+2004    09     0.59342
+2004    10     0.61716
+2004    11     0.62511
+2004    12     0.68284
+2005    01     0.67566
+2005    02     0.61536
+2005    03     0.66544
+2005    04     0.61158
+2005    05     0.60571
+2005    06     0.61097
+2005    07     0.61800
+2005    08     0.62523
+2005    09     0.61036
+2005    10     0.62953
+2005    11     0.64066
+2005    12     0.70520
+2006    01     0.67556
+2006    02     0.63269
+2006    03     0.68363
+2006    04     0.62148
+2006    05     0.62526
+2006    06     0.62507
+2006    07     0.64087
+2006    08     0.64627
+2006    09     0.63042
+2006    10     0.65911
+2006    11     0.66051
+2006    12     0.71582
+2007    01     0.69849
+2007    02     0.65680
+2007    03     0.69762
+2007    04     0.64523
+2007    05     0.64697
+2007    06     0.65051
+2007    07     0.65709
+2007    08     0.67078
+2007    09     0.64786
+2007    10     0.67711
+2007    11     0.68544
+2007    12     0.73625
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_actuel
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_actuel	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_actuel	(revision 5893)
@@ -0,0 +1,69 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_ : DEFAULT = 1361.20 
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_: DEFAULT = 0.36886500E+03
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_ : DEFAULT = 0.17510225E+04
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_ : DEFAULT = 0.31585000E+03
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_ : DEFAULT = 5.18015181E+01
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_ : DEFAULT = 0.99862742E+03
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# COSP
+ok_cosp=_AUTO_
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_annuel
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_annuel	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_annuel	(revision 5893)
@@ -0,0 +1,71 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_: DEFAULT = 0.0 
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=annuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# COSP
+ok_cosp=_AUTO_
+# volcanoes and solar forcing 
+ok_suntime_rrtm=y
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_preind
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_preind	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/config.def_preind	(revision 5893)
@@ -0,0 +1,75 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+
+## Pas de temps de couplage (s). 
+t_coupl=_AUTO_
+
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+#solaire = _AUTO_: DEFAULT = 1361.20
+solaire = _AUTO_: DEFAULT = 1361.20
+#
+# Taux gaz a effet de serre
+#
+## co2_ppm =    taux CO2 en ppm, l'annÃ©e 1850 forcage CMIP6
+co2_ppm =1137.28
+### CH4_ppb =    taux CH4 en ppb, l'annÃ©e 1850 forcage CMIP6
+CH4_ppb = _AUTO_: DEFAULT = 8.0825e+02
+### N2O_ppb =    taux N2O en ppb, l'annÃ©e 1850 forcage CMIP6
+N2O_ppb = _AUTO_: DEFAULT = 2.7302e+02
+## CFC11_ppt = taux en ppt, l'annÃ©e 1850 forcage CFC11eq_CMIP6
+CFC11_ppt = _AUTO_: DEFAULT = 1.1726e+01
+### CFC12_ppt = taux en ppt, l'annÃ©e 1850 forcage CFC12eq_CMIP6
+CFC12_ppt = _AUTO_: DEFAULT = 1.6513e+01
+#
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=preind
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# COSP
+ok_cosp=_AUTO_
+flag_aerosol_strat=0
+ok_suntime_rrtm=y
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/context_nemo.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/context_nemo.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/context_nemo.xml	(revision 5893)
@@ -0,0 +1,156 @@
+<!--
+ ============================================================================================== 
+    NEMO context
+============================================================================================== 
+-->
+<context id="nemo">
+<!-- $id$ -->
+    <variable_definition>
+       <!-- Year/Month/Day of time origin for NetCDF files; defaults to 1800-01-01 -->
+       <variable id="ref_year"  type="int"> 1800 </variable>
+       <variable id="ref_month" type="int"> 01 </variable>
+       <variable id="ref_day"   type="int"> 01 </variable>
+       <variable id="rau0"      type="float" > 1026.0 </variable>
+       <variable id="cpocean"   type="float" > 3991.86795711963 </variable>
+       <variable id="convSpsu"  type="float" > 0.99530670233846  </variable>
+       <variable id="rhoic"     type="float" > 917.0 </variable>
+       <variable id="rhosn"     type="float" > 330.0 </variable>
+    </variable_definition>
+
+<!-- Fields definition -->
+    <field_definition src="./field_def_nemo-opa.xml"/>   <!--  NEMO ocean dynamics                     -->
+    <field_definition src="./field_def_nemo-lim.xml"/>   <!--  NEMO ocean sea ice                      -->
+    <field_definition src="./field_def_nemo-pisces.xml"/>   <!--  NEMO ocean biogeochemistry with PISCES  -->
+
+
+<!-- Files definition -->
+    <file_definition src="./file_def_nemo-opa.xml"/>     <!--  NEMO ocean dynamics                     -->
+    <file_definition src="./file_def_nemo-lim.xml"/>     <!--  NEMO ocean sea ice                      -->
+    <file_definition src="./file_def_nemo-pisces.xml"/>     <!--  NEMO ocean biogeochemistry with PISCES  -->
+    <!-- 
+============================================================================================================
+= grid definition = = DO NOT CHANGE =
+============================================================================================================
+    -->
+    
+    <axis_definition>
+      <axis id="deptht" long_name="Vertical T levels" unit="m" positive="down" />
+      <axis id="depthu" long_name="Vertical U levels" unit="m" positive="down" />
+      <axis id="depthv" long_name="Vertical V levels" unit="m" positive="down" />
+      <axis id="depthw" long_name="Vertical W levels" unit="m" positive="down" />
+      <axis id="nfloat" long_name="Float number"      unit="-"                 />
+      <axis id="icbcla"  long_name="Iceberg class"      unit="1"               />
+      <axis id="ncatice" long_name="Ice category"       unit="1"               />
+      <axis id="iax_20C" long_name="20 degC isotherm"   unit="degC"            />
+      <axis id="iax_28C" long_name="28 degC isotherm"   unit="degC"            />
+    </axis_definition>
+ 
+    <domain_definition src="./domain_def_nemo.xml"/>
+  
+    <grid_definition>    
+
+    <grid id="grid_T">
+      <domain domain_ref="grid_T" />
+    </grid>
+
+       <grid id="grid_icbcla" >
+         <domain domain_ref="grid_T" />
+         <axis axis_ref="icbcla" />
+       </grid>
+
+       <grid id="grid_iax_20C" >
+         <domain domain_ref="grid_T" />
+         <axis axis_ref="iax_20C" />
+       </grid>
+
+       <grid id="grid_iax_28C" >
+         <domain domain_ref="grid_T" />
+         <axis axis_ref="iax_28C" />
+       </grid>
+
+        <!--  -->
+       <grid id="grid_T_2D" >
+         <domain domain_ref="grid_T" />
+       </grid>
+        <!--  -->
+       <grid id="grid_T_3D_ncatice" >
+         <domain domain_ref="grid_T" />
+         <axis axis_ref="ncatice" />
+       </grid>
+        <!--  -->
+       <grid id="grid_T_3D" >
+         <domain domain_ref="grid_T" />
+         <axis axis_ref="deptht" />
+       </grid>
+        <!--  -->
+       <grid id="grid_U_2D" >
+         <domain domain_ref="grid_U" />
+       </grid>
+        <!--  -->
+       <grid id="grid_U_3D" >
+         <domain domain_ref="grid_U" />
+         <axis axis_ref="depthu" />
+       </grid>
+        <!--  -->
+       <grid id="grid_V_2D" >
+         <domain domain_ref="grid_V" />
+       </grid>
+        <!--  -->
+       <grid id="grid_V_3D" >
+         <domain domain_ref="grid_V" />
+         <axis axis_ref="depthv" />
+       </grid>
+        <!--  -->
+       <grid id="grid_W_2D" >
+         <domain domain_ref="grid_W" />
+       </grid>
+        <!--  -->
+       <grid id="grid_W_3D" >
+         <domain id="grid_W" />
+         <axis axis_ref="depthw" />
+       </grid>
+        <!--  -->
+       <grid id="grid_1point" >
+         <domain domain_ref="1point"/>
+       </grid>
+        <!--  -->
+       <grid id="grid_T_nfloat" >
+         <domain domain_ref="grid_T" />
+         <axis axis_ref="nfloat" />
+       </grid>
+        <!--  -->
+       <grid id="grid_EqT" >
+         <domain domain_ref="EqT" />
+       </grid>
+        <!--  -->
+       <grid id="grid_znl_T_2D">
+         <domain domain_ref="gznl" />
+       </grid>
+        <!--  -->
+       <grid id="grid_znl_T_3D">
+         <domain domain_ref="gznl" />
+         <axis axis_ref="deptht" />
+       </grid>
+        <!--  -->
+       <grid id="grid_znl_W_3D">
+         <domain domain_ref="gznl" />
+         <axis axis_ref="depthw" />
+       </grid>
+
+      <grid id="grid_ptr_T_2D">
+       <domain domain_ref="ptr" />
+      </grid>
+
+      <grid id="grid_ptr_T_3D">
+       <domain domain_ref="ptr" />
+         <axis axis_ref="deptht" />
+       </grid>
+
+      <grid id="grid_ptr_W_3D">
+       <domain domain_ref="ptr" />
+         <axis axis_ref="depthw" />
+      </grid>
+
+    </grid_definition>   
+
+</context>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/domain_def_nemo.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/domain_def_nemo.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/domain_def_nemo.xml	(revision 5893)
@@ -0,0 +1,194 @@
+
+   <domain_definition>
+     <domain_group id="grid_T">
+       <domain id="grid_T" long_name="grid T"/>
+       <!--   My zoom: example of hand defined zoom   -->
+       <domain id="myzoom" domain_ref="grid_T" >
+          <zoom_domain id="myzoom"  ibegin="60" jbegin="60" ni="5" nj="5" />
+       </domain>
+       <domain id="1point" domain_ref="grid_T" >
+          <zoom_domain id="1point" ibegin="60" jbegin="60" ni="1" nj="1" />
+       </domain>
+         <!--   Eq section -->
+       <domain id="EqT" domain_ref="grid_T" >
+	      <zoom_domain id="EqT" ibegin="0" jbegin="0000" ni="0000" nj="1" />
+	   </domain>
+         <!--   TAO : see example above   -->
+         <!--   137e   -->
+         <!-- <domain id="2n137eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n137eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n137eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   147e   -->
+         <!-- <domain id="0n147eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n147eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n147eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   156e   -->
+         <!-- <domain id="5s156eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s156eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n156eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n156eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n156eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n156eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   165e   -->
+         <!-- <domain id="8s165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n165eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   180w   -->
+         <!-- <domain id="8s180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n180wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   170w   -->
+         <!-- <domain id="8s170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n170wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   155w   -->
+         <!-- <domain id="8s155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n155wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   140w   -->
+         <!-- <domain id="8s140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n140wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   125w   -->
+         <!-- <domain id="8s125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n125wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   110w   -->
+         <!-- <domain id="8s110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n110wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   95w   -->
+         <!-- <domain id="8s95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2s95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="2n95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5n95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n95wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   RAMA   -->
+         <!--   55e   -->
+         <!-- <domain id="16s55eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12s55eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8s55eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4s55eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5s55eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n55eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5n55eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4n55eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   65e   -->
+         <!-- <domain id="15n65eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   67e   -->
+         <!-- <domain id="16s67eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12s67eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8s67eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4s67eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5s67eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n67eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5n67eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4n67eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n67eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   80.5e -->
+         <!-- <domain id="16s80.5eT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12s80.5eT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8s80.5eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4s80.5eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5s80.5eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n80.5eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5n80.5eT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4n80.5eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   90e   -->
+         <!-- <domain id="1.5s90eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n90eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="1.5n90eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4n90eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n90eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12n90eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="15n90eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   95e   -->
+         <!-- <domain id="16s95eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12s95eT"    domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8s95eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="5s95eT"     domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   PIRATA   -->
+         <!--   38w-30w  -->
+         <!-- <domain id="19s34wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="14s32wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8s30wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n35wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4n38wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="8n38wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12n38wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="15n38wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="20n38wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   23w   -->
+         <!-- <domain id="0n23wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="4n23wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="12n23wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="21n23wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   10w   -->
+         <!-- <domain id="10s10wT" domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="6s10wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!-- <domain id="0n10wT"  domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+         <!--   0e   -->
+         <!-- <domain id="0n0eT"   domain_ref="grid_T" zoom_ibegin="0000" zoom_jbegin="0000" zoom_ni="1" zoom_nj="1" /> -->
+      </domain_group>
+
+      <domain_group id="grid_U">
+         <domain id="grid_U" long_name="grid U"/>
+         <!--   Eq section   -->
+         <domain id="EqU" domain_ref="grid_U" >
+	   <zoom_domain id="EqU" ibegin="1" jbegin="0000" ni="0000" nj="1" /> 
+	 </domain>    
+      </domain_group>
+
+      <domain id="grid_V" long_name="grid V"/>
+
+      <domain_group id="grid_W">
+         <domain id="grid_W" long_name="grid W"/>
+         <!--   Eq section   -->
+         <domain id="EqW" domain_ref="grid_W" >
+	   <zoom_domain id="EqW" ibegin="1" jbegin="0000" ni="0000" nj="1" />
+	 </domain>   
+      </domain_group>
+
+      <domain_group id="scalarpoint">
+         <domain id="scalarpoint" long_name="scalar"/>
+      </domain_group>
+
+        <domain_group id="gznl">
+         <domain id="gznl" long_name="gznl"/>
+         <domain id="ptr" domain_ref="gznl" >
+	   <zoom_domain id="ptr" ibegin="0000" jbegin="0" ni="1" nj="0000" />
+	</domain>  
+        </domain_group>
+
+   </domain_definition>    
+ 
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-lim2.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-lim2.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-lim2.xml	(revision 5893)
@@ -0,0 +1,205 @@
+<?xml version="1.0"?> 
+    <!-- $id$ -->
+    
+    <!-- 
+============================================================================================================
+=                                  definition of all existing variables                                    =
+=                                            DO NOT CHANGE                                                 =
+============================================================================================================
+    -->
+   <field_definition level="1" prec="4" operation="average" enabled=".TRUE." default_value="1.e20" > <!-- time step automaticaly defined -->
+
+      <field_group id="SBC" grid_ref="grid_T_2D" > <!-- time step automaticaly defined based on nn_fsbc -->
+         <!-- ice LIM fields -->
+         <field id="ice_cover"    long_name="Ice fraction"                                                 standard_name="sea_ice_area_fraction"                              unit="1"            />
+
+         <field id="qsr_ai_cea"   long_name="Air-Ice downward solar heat flux (cell average)"              standard_name="surface_downwelling_shortwave_flux_in_air"          unit="W/m2"         />
+         <field id="qns_ai_cea"   long_name="Air-Ice downward non-solar heat flux (cell average)"                                                                             unit="W/m2"         />
+         <field id="qla_ai_cea"   long_name="Air-Ice downward Latent heat flux (cell average)"             standard_name="surface_downward_latent_heat_flux"                  unit="W/m2"         />
+         
+         <field id="qsr_io_cea"   long_name="Ice-Oce downward solar heat flux (cell average)"              standard_name="net_downward_shortwave_flux_at_sea_water_surface"   unit="W/m2"         />
+         <field id="qns_io_cea"   long_name="Ice-Oce downward non-solar heat flux (cell average)"                                                                             unit="W/m2"         />
+         
+         <field id="snowthic_cea" long_name="Snow thickness (cell average)"                                standard_name="surface_snow_thickness"                             unit="m"            />
+         <field id="icethic_cea"  long_name="Ice thickness (cell average)"                                 standard_name="sea_ice_thickness"                                  unit="m"            />
+         <field id="iceprod_cea"  long_name="Ice production (cell average)"                                                                                                   unit="m/s"          />
+         <field id="iiceconc"     long_name="Ice concentration"                                            standard_name="sea_ice_area_fraction"                              unit="1"            />
+         
+         <field id="ice_pres"     long_name="Ice presence"                                                                                                                    unit=""             />
+         <field id="ist_cea"      long_name="Ice surface temperature (cell average)"                       standard_name="surface_temperature"                                unit="degC"         />
+         <field id="ist_ipa"      long_name="Ice surface temperature (ice presence average)"               standard_name="surface_temperature"                                unit="degC"         />      
+         <field id="uice_ipa"     long_name="Ice velocity along i-axis at I-point (ice presence average)"  standard_name="sea_ice_x_velocity"                                 unit="m/s"          />      
+         <field id="vice_ipa"     long_name="Ice velocity along j-axis at I-point (ice presence average)"  standard_name="sea_ice_y_velocity"                                 unit="m/s"          />      
+         
+         <field id="utau_ice"     long_name="Wind stress along i-axis over the ice at i-point"             standard_name="surface_downward_x_stress"                          unit="N/m2"         />
+         <field id="vtau_ice"     long_name="Wind stress along j-axis over the ice at i-point"             standard_name="surface_downward_y_stress"                          unit="N/m2"         />
+         
+         <field id="u_imasstr"    long_name="Sea-ice mass transport along i-axis"                          standard_name="sea_ice_x_transport"                                unit="kg/s"         />
+         <field id="v_imasstr"    long_name="Sea-ice mass transport along j-axis"                          standard_name="sea_ice_y_transport"                                unit="kg/s"         />
+         <field id="emp_x_sst"    long_name="Concentration/Dilution term on SST"                                                                                              unit="kg*degC/m2/s" />
+         <field id="emp_x_sss"    long_name="Concentration/Dilution term on SSS"                                                                                              unit="kg*1e-3/m2/s" />        
+       
+         <field id="iceconc"      long_name="ice concentration"                                            standard_name="sea_ice_area_fraction"                              unit="%"            />
+       	 <field id="isst"         long_name="sea surface temperature"                                      standard_name="sea_surface_temperature"                            unit="degC"         />
+         <field id="isss"         long_name="sea surface salinity"                                         standard_name="sea_surface_salinity"                               unit="1e-3"         /> 
+         <field id="qt_oce"       long_name="total flux at ocean surface"                                  standard_name="surface_downward_heat_flux_in_sea_water"            unit="W/m2"         />
+         <field id="qsr_oce"      long_name="solar heat flux at ocean surface"                             standard_name="net_downward_shortwave_flux_at_sea_water_surface"   unit="W/m2"         />
+         <field id="qns_oce"      long_name="non-solar heat flux at ocean surface"                                                                                            unit="W/m2"         />
+         <field id="qt_ice"       long_name="total heat flux at ice surface: sum over categories"          standard_name="surface_downward_heat_flux_in_air"                  unit="W/m2"         />
+         <field id="qsr_ice"      long_name="solar heat flux at ice surface: sum over categories"          standard_name="surface_downwelling_shortwave_flux_in_air"          unit="W/m2"         />
+         <field id="qns_ice"      long_name="non-solar heat flux at ice surface: sum over categories"                                                                         unit="W/m2"         />
+         <field id="qtr_ice"      long_name="solar heat flux transmitted through ice: sum over categories"                                                                    unit="W/m2"         />
+         <field id="qemp_ice"     long_name="Downward Heat Flux from E-P over ice"                                                                                            unit="W/m2"         />
+         <field id="micesalt"     long_name="Mean ice salinity"                                                                                                               unit="1e-3"         />
+         <field id="miceage"      long_name="Mean ice age"                                                                                                                    unit="years"        />
+         <field id="alb_ice"      long_name="Mean albedo over sea ice"                                                                                                        unit=""             />
+         <field id="albedo"       long_name="Mean albedo over sea ice and ocean"                                                                                              unit=""             />
+
+         <field id="iceage_cat"   long_name="Ice age for categories"                                       unit="days"   grid_ref="grid_T_3D_ncatice" />
+         <field id="iceconc_cat"  long_name="Ice concentration for categories"                             unit="%"      grid_ref="grid_T_3D_ncatice" />
+         <field id="icethic_cat"  long_name="Ice thickness for categories"                                 unit="m"      grid_ref="grid_T_3D_ncatice" />
+         <field id="snowthic_cat" long_name="Snow thicknessi for categories"                               unit="m"      grid_ref="grid_T_3D_ncatice" />
+         <field id="salinity_cat" long_name="Sea-Ice Bulk salinity for categories"                         unit="g/kg"   grid_ref="grid_T_3D_ncatice" />
+         <field id="brinevol_cat" long_name="Brine volume for categories"                                  unit="%"      grid_ref="grid_T_3D_ncatice" />
+         <field id="icetemp_cat"  long_name="Ice temperature for categories"                               unit="degC"   grid_ref="grid_T_3D_ncatice" />
+         <field id="snwtemp_cat"  long_name="Snow temperature for categories"                              unit="degC"   grid_ref="grid_T_3D_ncatice" />
+
+         <field id="micet"        long_name="Mean ice temperature"                                         unit="degC"     />
+         <field id="icehc"        long_name="ice total heat content"                                       unit="10^9J"    /> 
+         <field id="isnowhc"      long_name="snow total heat content"                                      unit="10^9J"    />
+         <field id="icest"        long_name="ice surface temperature"                                      unit="degC"     />
+         <field id="ibrinv"       long_name="brine volume"                                                 unit="%"        />
+         <field id="icecolf"      long_name="frazil ice collection thickness"                              unit="m"        />
+         <field id="icestr"       long_name="ice strength"                                                 unit="N/m"      />
+         <field id="icevel"       long_name="ice velocity"                                                 unit="m/s"      />
+         <field id="idive"        long_name="divergence"                                                   unit="1e-8s-1"  />
+         <field id="ishear"       long_name="shear"                                                        unit="1e-8s-1"  />
+         <field id="icevolu"      long_name="ice volume"                                                   unit="m"        />
+         <field id="snowvol"      long_name="snow volume"                                                  unit="m"        />
+
+         <field id="icetrp"       long_name="ice volume transport"                                         unit="m/day"          />
+         <field id="snwtrp"       long_name="snw volume transport"                                         unit="m/day"          />
+         <field id="saltrp"       long_name="salt content transport"                                       unit="1e-3*kg/m2/day" />
+         <field id="deitrp"       long_name="advected ice enthalpy"                                        unit="W/m2"           />
+         <field id="destrp"       long_name="advected snw enthalpy"                                        unit="W/m2"           />
+
+         <field id="sfxbri"       long_name="brine salt flux"                                              unit="1e-3*kg/m2/day" />
+         <field id="sfxdyn"       long_name="salt flux from ridging rafting"                               unit="1e-3*kg/m2/day" />
+         <field id="sfxres"       long_name="salt flux from lipupdate (resultant)"                         unit="1e-3*kg/m2/day" />
+         <field id="sfxbog"       long_name="salt flux from bot growth"                                    unit="1e-3*kg/m2/day" />
+         <field id="sfxbom"       long_name="salt flux from bot melt"                                      unit="1e-3*kg/m2/day" />
+         <field id="sfxsum"       long_name="salt flux from surf melt"                                     unit="1e-3*kg/m2/day" />
+         <field id="sfxsni"       long_name="salt flux from snow-ice formation"                            unit="1e-3*kg/m2/day" />
+         <field id="sfxopw"       long_name="salt flux from open water ice formation"                      unit="1e-3*kg/m2/day" />
+         <field id="sfxsub"       long_name="salt flux from sublimation"                                   unit="1e-3*kg/m2/day" />
+         <field id="sfx"          long_name="salt flux total"                                              unit="1e-3*kg/m2/day" />
+
+         <field id="vfxbog"       long_name="daily bottom thermo ice prod."                                unit="m/day"   />
+         <field id="vfxdyn"       long_name="daily  dynamic ice prod."                                     unit="m/day"   />
+         <field id="vfxopw"       long_name="daily lateral thermo ice prod."                               unit="m/day"   />
+         <field id="vfxsni"       long_name="daily snowice ice prod."                                      unit="m/day"   />
+         <field id="vfxsum"       long_name="surface melt"                                                 unit="m/day"   />
+         <field id="vfxbom"       long_name="bottom melt"                                                  unit="m/day"   />
+         <field id="vfxres"       long_name="daily resultant ice prod./melting from limupdate"             unit="m/day"   />
+         <field id="vfxice"       long_name="ice melt/growth"                                              unit="m/day"   />
+         <field id="vfxsnw"       long_name="snw melt/growth"                                              unit="m/day"   />
+         <field id="vfxsub"       long_name="snw sublimation"                                              unit="m/day"   />
+         <field id="vfxspr"       long_name="snw precipitation on ice"                                     unit="m/day"   />
+         <field id="vfxthin"      long_name="daily thermo ice prod. for thin ice(&lt;20cm) + open water"   unit="m/day"   />
+
+         <field id="afxtot"       long_name="area tendency (total)"                                        unit="day-1"   />
+         <field id="afxdyn"       long_name="area tendency (dynamics)"                                     unit="day-1"   />
+         <field id="afxthd"       long_name="area tendency (thermo)"                                       unit="day-1"   />
+
+         <field id="hfxsum"       long_name="heat fluxes causing surface ice melt"                         unit="W/m2"  />
+         <field id="hfxbom"       long_name="heat fluxes causing bottom ice melt"                          unit="W/m2"  />
+         <field id="hfxbog"       long_name="heat fluxes causing bottom ice growth"                        unit="W/m2"  />
+         <field id="hfxdif"       long_name="heat fluxes causing ice temperature change"                   unit="W/m2"  />
+         <field id="hfxopw"       long_name="heat fluxes causing open water ice formation"                 unit="W/m2"  />
+         <field id="hfxsnw"       long_name="heat fluxes causing snow melt"                                unit="W/m2"  />
+         <field id="hfxerr"       long_name="heat fluxes error after heat diffusion"                       unit="W/m2"  />
+         <field id="hfxerr_rem"   long_name="heat fluxes error after remapping"                            unit="W/m2"  />
+         <field id="hfxout"       long_name="total heat fluxes received by the ocean"                      unit="W/m2"  />
+         <field id="hfxin"        long_name="total heat fluxes at the ice/ocean surface"                   unit="W/m2"  />
+
+         <!-- heat flux associated with mass exchange -->
+         <field id="hfxthd"       long_name="heat fluxes from ice-ocean mass exchange during thermo"       unit="W/m2"  />
+         <field id="hfxdyn"       long_name="heat fluxes from ice-ocean mass exchange during dynamic"      unit="W/m2"  />
+         <field id="hfxres"       long_name="heat fluxes from ice-ocean mass exchange during resultant"    unit="W/m2"  />
+         <field id="hfxsub"       long_name="heat fluxes from ice-atm. mass exchange during sublimation"   unit="W/m2"  />
+         <field id="hfxspr"       long_name="heat fluxes from ice-atm. mass exchange during snow precip"   unit="W/m2"  />
+
+         <!-- diags -->
+         <field id="hfxdhc"       long_name="Heat content variation in snow and ice"                       unit="W/m2" />
+         <field id="hfxtur"       long_name="turbulent heat flux at the ice base"                          unit="W/m2" />
+	 <!-- sbcssm variables -->
+         <field id="sst_m"    unit="degC" />
+         <field id="sss_m"    unit="psu"  />
+         <field id="ssu_m"    unit="m/s"  />
+         <field id="ssv_m"    unit="m/s"  />
+         <field id="ssh_m"    unit="m"    />
+         <field id="e3t_m"    unit="m"    />
+         <field id="frq_m"    unit="-"    />
+
+      </field_group>
+
+      <!-- LIM3 scalar variables -->
+
+      <field_group id="SBC_scalar"  grid_ref="grid_T_2D" >
+         <!-- available with ln_limdiaout -->
+         <field id="ibgvoltot"    long_name="global mean ice volume"                                 unit="km3"        />
+         <field id="sbgvoltot"    long_name="global mean snow volume"                                unit="km3"        />
+         <field id="ibgarea"      long_name="global mean ice area"                                   unit="km2"        />
+         <field id="ibgsaline"    long_name="global mean ice salinity"                               unit="1e-3"       />
+         <field id="ibgtemper"    long_name="global mean ice temperature"                            unit="degC"       />
+         <field id="ibgheatco"    long_name="global mean ice heat content"                           unit="10^20J"     />
+         <field id="sbgheatco"    long_name="global mean snow heat content"                          unit="10^20J"     />
+         <field id="ibgsaltco"    long_name="global mean ice salt content"                           unit="1e-3*km3"   />
+
+         <field id="ibgvfx"       long_name="global mean volume flux (emp)"                          unit="m/day"      />
+         <field id="ibgvfxbog"    long_name="global mean volume flux (bottom growth)"                unit="m/day"      />
+         <field id="ibgvfxopw"    long_name="global mean volume flux (open water growth)"            unit="m/day"      />
+         <field id="ibgvfxsni"    long_name="global mean volume flux (snow-ice growth)"              unit="m/day"      />
+         <field id="ibgvfxdyn"    long_name="global mean volume flux (dynamic growth)"               unit="m/day"      />
+         <field id="ibgvfxbom"    long_name="global mean volume flux (bottom melt)"                  unit="m/day"      />
+         <field id="ibgvfxsum"    long_name="global mean volume flux (surface melt)"                 unit="m/day"      />
+         <field id="ibgvfxres"    long_name="global mean volume flux (resultant)"                    unit="m/day"      />
+         <field id="ibgvfxspr"    long_name="global mean volume flux (snow precip)"                  unit="m/day"      />
+         <field id="ibgvfxsnw"    long_name="global mean volume flux (snow melt)"                    unit="m/day"      />
+         <field id="ibgvfxsub"    long_name="global mean volume flux (snow sublimation)"             unit="m/day"      />
+
+         <field id="ibgsfx"       long_name="global mean salt flux (total)"                          unit="1e-3*m/day" />
+         <field id="ibgsfxbri"    long_name="global mean salt flux (brines)"                         unit="1e-3*m/day" />
+         <field id="ibgsfxdyn"    long_name="global mean salt flux (dynamic)"                        unit="1e-3*m/day" />
+         <field id="ibgsfxres"    long_name="global mean salt flux (resultant)"                      unit="1e-3*m/day" />
+         <field id="ibgsfxbog"    long_name="global mean salt flux (thermo)"                         unit="1e-3*m/day" />
+         <field id="ibgsfxopw"    long_name="global mean salt flux (thermo)"                         unit="1e-3*m/day" />
+         <field id="ibgsfxsni"    long_name="global mean salt flux (thermo)"                         unit="1e-3*m/day" />
+         <field id="ibgsfxbom"    long_name="global mean salt flux (thermo)"                         unit="1e-3*m/day" />
+         <field id="ibgsfxsum"    long_name="global mean salt flux (thermo)"                         unit="1e-3*m/day" />
+         <field id="ibgsfxsub"    long_name="global mean salt flux (thermo)"                         unit="1e-3*m/day" />
+
+         <field id="ibghfxdhc"    long_name="Heat content variation in snow and ice"                 unit="W"          />
+         <field id="ibghfxspr"    long_name="Heat content of snow precip"                            unit="W"          />
+
+         <field id="ibghfxthd"    long_name="heat fluxes from ice-ocean exchange during thermo"      unit="W"          />
+         <field id="ibghfxsum"    long_name="heat fluxes causing surface ice melt"                   unit="W"          />
+         <field id="ibghfxbom"    long_name="heat fluxes causing bottom ice melt"                    unit="W"          />
+         <field id="ibghfxbog"    long_name="heat fluxes causing bottom ice growth"                  unit="W"          />
+         <field id="ibghfxdif"    long_name="heat fluxes causing ice temperature change"             unit="W"          />
+         <field id="ibghfxopw"    long_name="heat fluxes causing open water ice formation"           unit="W"          />
+         <field id="ibghfxdyn"    long_name="heat fluxes from ice-ocean exchange during dynamic"     unit="W"          />
+         <field id="ibghfxres"    long_name="heat fluxes from ice-ocean exchange during resultant"   unit="W"          />
+         <field id="ibghfxsub"    long_name="heat fluxes from sublimation"                           unit="W"          />
+         <field id="ibghfxsnw"    long_name="heat fluxes from snow-ocean exchange"                   unit="W"          />
+         <field id="ibghfxout"    long_name="non solar heat fluxes received by the ocean"            unit="W"          />
+         <field id="ibghfxin"     long_name="total heat fluxes at the ice surface"                   unit="W"          />
+
+         <field id="ibgfrcvol"    long_name="global mean forcing volume (emp)"                       unit="km3"        />
+         <field id="ibgfrcsfx"    long_name="global mean forcing salt   (sfx)"                       unit="1e-3*km3"   />
+         <field id="ibgvolgrm"    long_name="global mean ice growth+melt volume"                     unit="km3"        />
+      </field_group>
+  
+ 
+
+   </field_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-opa.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-opa.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-opa.xml	(revision 5893)
@@ -0,0 +1,811 @@
+<?xml version="1.0"?> 
+    <!-- $id$ -->
+    
+    <!-- 
+============================================================================================================
+=                                  definition of all existing variables                                    =
+=                                            DO NOT CHANGE                                                 =
+============================================================================================================
+    -->
+   <field_definition level="1" prec="4" operation="average" enabled=".TRUE." default_value="1.e20" > <!-- time step automaticaly defined -->
+
+    <!-- 
+============================================================================================================
+                                  Dynamical ocean model variables
+============================================================================================================
+    -->
+
+      <!-- T grid -->
+      
+      <field_group id="grid_T" grid_ref="grid_T_2D" >
+         <field id="e3t"          long_name="T-cell thickness"   standard_name="cell_thickness"   unit="m"   grid_ref="grid_T_3D"/>
+	 <field id="e3t_0"        long_name="Initial T-cell thickness"   standard_name="ref_cell_thickness"   unit="m"   grid_ref="grid_T_3D"/>
+	 <field id="masscello"    long_name="Sea Water Mass per unit area"   standard_name="sea_water_mass_per_unit_area"   unit="kg/m2"   grid_ref="grid_T_3D"/>
+         <field id="volcello"     long_name="Ocean Volume"                   standard_name="ocean_volume"   unit="m3"       grid_ref="grid_T_3D"/> <!-- WARNING : not consistent with CMIP DR where volcello is at ca. 2000 -->
+
+
+         <field id="toce"         long_name="temperature"         standard_name="sea_water_potential_temperature"   unit="degC"     grid_ref="grid_T_3D"/>
+         <field id="toce_e3t"     long_name="temperature * e3t"                                                     unit="degC*m"   grid_ref="grid_T_3D" > toce * e3t </field >
+         <field id="soce"         long_name="salinity"            standard_name="sea_water_practical_salinity"      unit="1e-3"     grid_ref="grid_T_3D"/>
+         <field id="soce_e3t"     long_name="salinity * e3t"                                                        unit="1e-3*m"   grid_ref="grid_T_3D" > soce * e3t </field >
+
+         <field id="sst"          long_name="sea surface temperature"             standard_name="sea_surface_temperature"             unit="degC"     />
+         <field id="sst2"         long_name="square of sea surface temperature"   standard_name="square_of_sea_surface_temperature"   unit="degC2"     > sst * sst </field >
+         <field id="sstmax"       long_name="max of sea surface temperature"   field_ref="sst"   operation="maximum"                                  />
+         <field id="sstmin"       long_name="min of sea surface temperature"   field_ref="sst"   operation="minimum"                                  />
+         <field id="sstgrad"      long_name="module of sst gradient"                                                                  unit="degC/m"   />
+         <field id="sstgrad2"     long_name="square of module of sst gradient"                                                        unit="degC2/m2" />
+         <field id="sbt"          long_name="sea bottom temperature"                                                                  unit="degC"     />
+	 
+         <field id="sss"          long_name="sea surface salinity"             standard_name="sea_surface_salinity"   unit="1e-3" />
+         <field id="sss2"         long_name="square of sea surface salinity"                                          unit="1e-6"  > sss * sss </field >
+         <field id="sssmax"       long_name="max of sea surface salinity"   field_ref="sss"   operation="maximum"                 />
+         <field id="sssmin"       long_name="min of sea surface salinity"   field_ref="sss"   operation="minimum"                 />
+         <field id="sbs"          long_name="sea bottom salinity"                                                     unit="1e-3" />
+
+         <field id="taubot"       long_name="bottom stress module"                                                    unit="N/m2" /> 
+
+         <field id="ssh"          long_name="sea surface height"             standard_name="sea_surface_height_above_geoid"             unit="m" />
+         <field id="ssh2"         long_name="square of sea surface height"   standard_name="square_of_sea_surface_height_above_geoid"   unit="m2" > ssh * ssh </field >
+         <field id="sshmax"       long_name="max of sea surface height"   field_ref="ssh"   operation="maximum"                                  />
+
+         <field id="mldkz5"       long_name="Turbocline depth (Kz = 5e-4)"                       standard_name="ocean_mixed_layer_thickness_defined_by_vertical_tracer_diffusivity"                unit="m"          />
+         <field id="mldr10_1"     long_name="Mixed Layer Depth (dsigma = 0.01 wrt 10m)"          standard_name="ocean_mixed_layer_thickness_defined_by_sigma_theta"                                unit="m"          />
+         <field id="mldr10_1max"  long_name="Max of Mixed Layer Depth (dsigma = 0.01 wrt 10m)"   field_ref="mldr10_1"   operation="maximum"                                                                          />
+         <field id="mldr10_1min"  long_name="Min of Mixed Layer Depth (dsigma = 0.01 wrt 10m)"   field_ref="mldr10_1"   operation="minimum"                                                                          />
+         <field id="heatc"        long_name="Heat content vertically integrated"                 standard_name="integral_of_sea_water_potential_temperature_wrt_depth_expressed_as_heat_content"   unit="J/m2"       />
+         <field id="saltc"        long_name="Salt content vertically integrated"                                                                                                                   unit="1e-3*kg/m2" />
+
+         <!-- EOS -->
+         <field id="alpha"        long_name="thermal expansion"                                                         unit="degC-1" grid_ref="grid_T_3D" />
+         <field id="beta"         long_name="haline contraction"                                                        unit="1e3"    grid_ref="grid_T_3D" />
+         <field id="rhop"         long_name="potential density (sigma0)"        standard_name="sea_water_sigma_theta"   unit="kg/m3"  grid_ref="grid_T_3D" />
+
+         <!-- Energy - horizontal divergence -->
+         <field id="eken"         long_name="kinetic energy"          standard_name="specific_kinetic_energy_of_sea_water"   unit="m2/s2"  grid_ref="grid_T_3D" />
+         <field id="hdiv"         long_name="horizontal divergence"                                                          unit="s-1"    grid_ref="grid_T_3D" />
+
+         <!-- variables available with MLE -->
+         <field id="Lf_NHpf"      long_name="MLE: Lf = N H / f"   unit="m" />
+
+         <!-- next variables available with key_diahth -->
+         <field id="mlddzt"       long_name="Thermocline Depth (depth of max dT/dz)"         standard_name="depth_at_maximum_upward_derivative_of_sea_water_potential_temperature"             unit="m"                         />
+         <field id="mldr10_3"     long_name="Mixed Layer Depth (dsigma = 0.03 wrt 10m)"      standard_name="ocean_mixed_layer_thickness_defined_by_sigma_theta"                                unit="m"                         />
+         <field id="mldr0_1"      long_name="Mixed Layer Depth (dsigma = 0.01 wrt sfc)"      standard_name="ocean_mixed_layer_thickness_defined_by_sigma_theta"                                unit="m"                         />
+         <field id="mldr0_3"      long_name="Mixed Layer Depth (dsigma = 0.03 wrt sfc)"      standard_name="ocean_mixed_layer_thickness_defined_by_sigma_theta"                                unit="m"                         />
+         <field id="mld_dt02"     long_name="Mixed Layer Depth (|dT| = 0.2 wrt 10m)"         standard_name="ocean_mixed_layer_thickness_defined_by_temperature"                                unit="m"                         />
+         <field id="topthdep"     long_name="Top of Thermocline Depth (dT = -0.2 wrt 10m)"   standard_name="ocean_mixed_layer_thickness_defined_by_temperature"                                unit="m"                         />
+         <field id="pycndep"      long_name="Pycnocline Depth (dsigma[dT=-0.2] wrt 10m)"     standard_name="ocean_mixed_layer_thickness_defined_by_sigma_theta"                                unit="m"                         />
+         <field id="BLT"          long_name="Barrier Layer Thickness"                                                                                                                          unit="m"                          > topthdep - pycndep </field>
+         <field id="tinv"         long_name="Max of vertical invertion of temperature"                                                                                                         unit="degC"                      />
+         <field id="depti"        long_name="Depth of max. vert. inv. of temperature"                                                                                                          unit="m"                         />
+         <field id="20d"          long_name="Depth of 20C isotherm"                          standard_name="depth_of_isosurface_of_sea_water_potential_temperature"                            unit="m"      grid_ref="grid_iax_20C" />
+         <field id="28d"          long_name="Depth of 28C isotherm"                          standard_name="depth_of_isosurface_of_sea_water_potential_temperature"                            unit="m"      grid_ref="grid_iax_28C" />
+         <field id="hc300"        long_name="Heat content 0-300m"                            standard_name="integral_of_sea_water_potential_temperature_wrt_depth_expressed_as_heat_content"   unit="J/m2"                      />
+
+         <!-- variables available with key_diaar5 -->
+         <field id="botpres"      long_name="Pressure at sea floor"   standard_name="sea_water_pressure_at_sea_floor"   unit="dbar" />
+
+         <!-- variables available with key_vvl -->
+         <field id="tpt_dep"      long_name="T-point depth"                  standard_name="depth_below_geoid"   unit="m"   grid_ref="grid_T_3D" />
+         <field id="e3tdef"       long_name="T-cell thickness deformation"                                       unit="%"   grid_ref="grid_T_3D" />
+      </field_group>
+
+      <!-- Tides -->
+
+      <field_group id="Tides_T" grid_ref="grid_T_2D" operation="once" >
+         <!-- tidal composante -->
+         <field id="M2x"          long_name="M2 Elevation harmonic real part "                             unit="m"        />
+         <field id="M2y"          long_name="M2 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="S2x"          long_name="S2 Elevation harmonic real part "                             unit="m"        />
+         <field id="S2y"          long_name="S2 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="N2x"          long_name="N2 Elevation harmonic real part "                             unit="m"        />
+         <field id="N2y"          long_name="N2 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="K1x"          long_name="K1 Elevation harmonic real part "                             unit="m"        />
+         <field id="K1y"          long_name="K1 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="O1x"          long_name="O1 Elevation harmonic real part "                             unit="m"        />
+         <field id="O1y"          long_name="O1 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="Q1x"          long_name="Q1 Elevation harmonic real part "                             unit="m"        />
+         <field id="Q1y"          long_name="Q1 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="M4x"          long_name="M4 Elevation harmonic real part "                             unit="m"        />
+         <field id="M4y"          long_name="M4 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="K2x"          long_name="K2 Elevation harmonic real part "                             unit="m"        />
+         <field id="K2y"          long_name="K2 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="P1x"          long_name="P1 Elevation harmonic real part "                             unit="m"        />
+         <field id="P1y"          long_name="P1 Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="Mfx"          long_name="Mf Elevation harmonic real part "                             unit="m"        />
+         <field id="Mfy"          long_name="Mf Elevation harmonic imaginary part"                         unit="m"        />
+         <field id="Mmx"          long_name="Mm Elevation harmonic real part "                             unit="m"        />
+         <field id="Mmy"          long_name="Mm Elevation harmonic imaginary part"                         unit="m"        />
+      </field_group>
+	 
+      <field_group id="Tides_U" grid_ref="grid_U_2D" operation="once" >
+         <field id="M2x_u"        long_name="M2 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="M2y_u"        long_name="M2 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="S2x_u"        long_name="S2 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="S2y_u"        long_name="S2 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="N2x_u"        long_name="N2 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="N2y_u"        long_name="N2 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="K1x_u"        long_name="K1 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="K1y_u"        long_name="K1 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="O1x_u"        long_name="O1 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="O1y_u"        long_name="O1 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="Q1x_u"        long_name="Q1 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="Q1y_u"        long_name="Q1 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="M4x_u"        long_name="M4 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="M4y_u"        long_name="M4 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="K2x_u"        long_name="K2 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="K2y_u"        long_name="K2 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="P1x_u"        long_name="P1 current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="P1y_u"        long_name="P1 current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="Mfx_u"        long_name="Mf current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="Mfy_u"        long_name="Mf current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="Mmx_u"        long_name="Mm current barotrope along i-axis harmonic real part "        unit="m/s"      />
+         <field id="Mmy_u"        long_name="Mm current barotrope along i-axis harmonic imaginary part "   unit="m/s"      />
+      </field_group>
+	 
+      <field_group id="Tides_V" grid_ref="grid_V_2D" operation="once" >
+         <field id="M2x_v"        long_name="M2 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="M2y_v"        long_name="M2 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="S2x_v"        long_name="S2 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="S2y_v"        long_name="S2 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="N2x_v"        long_name="N2 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="N2y_v"        long_name="N2 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="K1x_v"        long_name="K1 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="K1y_v"        long_name="K1 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="O1x_v"        long_name="O1 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="O1y_v"        long_name="O1 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="Q1x_v"        long_name="Q1 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="Q1y_v"        long_name="Q1 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="M4x_v"        long_name="M4 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="M4y_v"        long_name="M4 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="K2x_v"        long_name="K2 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="K2y_v"        long_name="K2 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="P1x_v"        long_name="P1 current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="P1y_v"        long_name="P1 current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="Mfx_v"        long_name="Mf current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="Mfy_v"        long_name="Mf current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />
+         <field id="Mmx_v"        long_name="Mm current barotrope along j-axis harmonic real part "        unit="m/s"      />
+         <field id="Mmy_v"        long_name="Mm current barotrope along j-axis harmonic imaginary part "   unit="m/s"      />	 
+      </field_group>
+
+      <!-- SBC -->
+      
+      <field_group id="SBC" grid_ref="grid_T_2D" > <!-- time step automaticaly defined based on nn_fsbc -->
+         <field id="empmr"        long_name="Net Upward Water Flux"                standard_name="water_flux_out_of_sea_ice_and_sea_water"                              unit="kg/m2/s"   />
+         <field id="empbmr"       long_name="Net Upward Water Flux at pre. tstep"  standard_name="water_flux_out_of_sea_ice_and_sea_water"                              unit="kg/m2/s"   />
+         <field id="emp_oce"      long_name="Evap minus Precip over ocean"         standard_name="evap_minus_precip_over_sea_water"                                     unit="kg/m2/s"   />
+         <field id="emp_ice"      long_name="Evap minus Precip over ice"           standard_name="evap_minus_precip_over_sea_ice"                                       unit="kg/m2/s"   />
+         <field id="saltflx"      long_name="Downward salt flux"                                                                                                        unit="1e-3/m2/s" />
+         <field id="fmmflx"       long_name="Water flux due to freezing/melting"                                                                                        unit="kg/m2/s"   />
+         <field id="snowpre"      long_name="Snow precipitation"                   standard_name="snowfall_flux"                                                        unit="kg/m2/s"   />
+         <field id="runoffs"      long_name="River Runoffs"                        standard_name="water_flux_into_sea_water_from_rivers"                                unit="kg/m2/s"   />
+         <field id="precip"       long_name="Total precipitation"                  standard_name="precipitation_flux"                                                   unit="kg/m2/s"   />
+ 
+         <field id="qt"           long_name="Net Downward Heat Flux"                standard_name="surface_downward_heat_flux_in_sea_water"                              unit="W/m2"                           />
+         <field id="qns"          long_name="non solar Downward Heat Flux"                                                                                               unit="W/m2"                           />
+         <field id="qsr"          long_name="Shortwave Radiation"                   standard_name="net_downward_shortwave_flux_at_sea_water_surface"                     unit="W/m2"                           />
+         <field id="qsr3d"        long_name="Shortwave Radiation 3D distribution"   standard_name="downwelling_shortwave_flux_in_sea_water"                              unit="W/m2"      grid_ref="grid_T_3D" />
+         <field id="qrp"          long_name="Surface Heat Flux: Damping"            standard_name="heat_flux_into_sea_water_due_to_newtonian_relaxation"                 unit="W/m2"                           />
+         <field id="erp"          long_name="Surface Water Flux: Damping"           standard_name="water_flux_out_of_sea_water_due_to_newtonian_relaxation"              unit="kg/m2/s"                        />
+         <field id="taum"         long_name="wind stress module"                    standard_name="magnitude_of_surface_downward_stress"                                 unit="N/m2"                           />
+         <field id="wspd"         long_name="wind speed module"                     standard_name="wind_speed"                                                           unit="m/s"                            />
+         
+         <!-- * variable relative to atmospheric pressure forcing : available with ln_apr_dyn -->
+         <field id="ssh_ib"       long_name="Inverse barometer sea surface height"  standard_name="sea_surface_height_correction_due_to_air_pressure_at_low_frequency"   unit="m"        />
+
+         <!-- * variable related to ice shelf forcing * -->
+         <field id="fwfisf"       long_name="Ice shelf melting"                             unit="kg/m2/s"  />
+         <field id="qisf"         long_name="Ice Shelf Heat Flux"                           unit="W/m2"     />
+         <field id="isfgammat"    long_name="transfert coefficient for isf (temperature)"   unit="m/s"      />
+         <field id="isfgammas"    long_name="transfert coefficient for isf (salinity)"      unit="m/s"      />
+         <field id="stbl"         long_name="salinity in the Losh tbl"                      unit="1e-3"     />
+         <field id="ttbl"         long_name="temperature in the Losh tbl"                   unit="degC"     />
+
+         <!-- *_oce variables available with ln_blk_clio or ln_blk_core -->
+         <field id="qlw_oce"      long_name="Longwave Downward Heat Flux over open ocean"  standard_name="surface_net_downward_longwave_flux"   unit="W/m2"  />
+         <field id="qsb_oce"      long_name="Sensible Downward Heat Flux over open ocean"  standard_name="surface_downward_sensible_heat_flux"  unit="W/m2"  />
+         <field id="qla_oce"      long_name="Latent Downward Heat Flux over open ocean"    standard_name="surface_downward_latent_heat_flux"    unit="W/m2"  />
+         <field id="qemp_oce"     long_name="Downward Heat Flux from E-P over open ocean"                                                       unit="W/m2"  />
+         <field id="taum_oce"     long_name="wind stress module over open ocean"           standard_name="magnitude_of_surface_downward_stress" unit="N/m2"  />
+
+         <!-- available key_oasis3 -->
+         <field id="snow_ao_cea"  long_name="Snow over ice-free ocean (cell average)"   standard_name="snowfall_flux"                             unit="kg/m2/s"  />
+         <field id="snow_ai_cea"  long_name="Snow over sea-ice (cell average)"          standard_name="snowfall_flux"                             unit="kg/m2/s"  />
+         <field id="subl_ai_cea"  long_name="Sublimation over sea-ice (cell average)"   standard_name="surface_snow_and_ice_sublimation_flux"     unit="kg/m2/s"  />
+         <field id="icealb_cea"   long_name="Ice albedo (cell average)"                 standard_name="sea_ice_albedo"                            unit="1"        />
+         <field id="calving_cea"  long_name="Calving"                                   standard_name="water_flux_into_sea_water_from_icebergs"   unit="kg/m2/s"  />
+
+         <!-- available if key_oasis3 + conservative method -->
+         <field id="rain"          long_name="Liquid precipitation"                                     standard_name="rainfall_flux"                                                                 unit="kg/m2/s"  />
+         <field id="evap_ao_cea"   long_name="Evaporation over ice-free ocean (cell average)"           standard_name="water_evaporation_flux"                                                        unit="kg/m2/s"  />
+         <field id="isnwmlt_cea"   long_name="Snow over Ice melting (cell average)"                     standard_name="surface_snow_melt_flux"                                                        unit="kg/m2/s"  />
+         <field id="fsal_virt_cea" long_name="Virtual salt flux due to ice formation (cell average)"    standard_name="virtual_salt_flux_into_sea_water_due_to_sea_ice_thermodynamics"                unit="kg/m2/s"  />
+         <field id="fsal_real_cea" long_name="Real salt flux due to ice formation (cell average)"       standard_name="downward_sea_ice_basal_salt_flux"                                              unit="kg/m2/s"  />
+         <field id="hflx_rain_cea" long_name="heat flux due to rainfall"                                standard_name="temperature_flux_due_to_rainfall_expressed_as_heat_flux_into_sea_water"        unit="W/m2"     />
+         <field id="hflx_evap_cea" long_name="heat flux due to evaporation"                             standard_name="temperature_flux_due_to_evaporation_expressed_as_heat_flux_out_of_sea_water"   unit="W/m2"     />
+         <field id="hflx_snow_cea" long_name="heat flux due to snow falling over ice-free ocean"        standard_name="heat_flux_into_sea_water_due_to_snow_thermodynamics"                           unit="W/m2"     />
+         <field id="hflx_ice_cea"  long_name="heat flux due to ice thermodynamics"                      standard_name="heat_flux_into_sea_water_due_to_sea_ice_thermodynamics"                        unit="W/m2"     />
+         <field id="hflx_rnf_cea"  long_name="heat flux due to runoffs"                                 standard_name="temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water"          unit="W/m2"     />
+         <field id="hflx_cal_cea"  long_name="heat flux due to calving"                                 standard_name="heat_flux_into_sea_water_due_to_iceberg_thermodynamics"                        unit="W/m2"     />
+         <field id="bicemel_cea"   long_name="Rate of Melt at Sea Ice Base (cell average)"              standard_name="tendency_of_sea_ice_amount_due_to_basal_melting"                               unit="kg/m2/s"  />
+         <field id="licepro_cea"   long_name="Lateral Sea Ice Growth Rate (cell average)"               standard_name="tendency_of_sea_ice_amount_due_to_lateral_growth_of_ice_floes"                 unit="kg/m2/s"  />
+         <field id="snowmel_cea"   long_name="Snow Melt Rate (cell average)"                            standard_name="surface_snow_melt_flux"                                                        unit="kg/m2/s"  />
+         <field id="sntoice_cea"   long_name="Snow-Ice Formation Rate (cell average)"                   standard_name="tendency_of_sea_ice_amount_due_to_snow_conversion"                             unit="kg/m2/s"  />
+         <field id="ticemel_cea"   long_name="Rate of Melt at Upper Surface of Sea Ice (cell average)"  standard_name="tendency_of_sea_ice_amount_due_to_surface_melting"                             unit="kg/m2/s"  />
+
+         <!-- ice fields -->
+         <field id="ice_cover"    long_name="Ice fraction"                                                 standard_name="sea_ice_area_fraction"                              unit="1"            />
+
+         <field id="qsr_ai_cea"   long_name="Air-Ice downward solar heat flux (cell average)"              standard_name="surface_downwelling_shortwave_flux_in_air"          unit="W/m2"         />
+         <field id="qns_ai_cea"   long_name="Air-Ice downward non-solar heat flux (cell average)"                                                                             unit="W/m2"         />
+         <field id="qla_ai_cea"   long_name="Air-Ice downward Latent heat flux (cell average)"             standard_name="surface_downward_latent_heat_flux"                  unit="W/m2"         />
+         
+         <field id="qsr_io_cea"   long_name="Ice-Oce downward solar heat flux (cell average)"              standard_name="net_downward_shortwave_flux_at_sea_water_surface"   unit="W/m2"         />
+         <field id="qns_io_cea"   long_name="Ice-Oce downward non-solar heat flux (cell average)"                                                                             unit="W/m2"         />
+         
+         <field id="snowthic_cea" long_name="Snow thickness (cell average)"                                standard_name="surface_snow_thickness"                             unit="m"            />
+         <field id="icethic_cea"  long_name="Ice thickness (cell average)"                                 standard_name="sea_ice_thickness"                                  unit="m"            />
+         <field id="iceprod_cea"  long_name="Ice production (cell average)"                                                                                                   unit="m/s"          />
+         <field id="iiceconc"     long_name="Ice concentration"                                            standard_name="sea_ice_area_fraction"                              unit="1"            />
+         
+         <field id="ice_pres"     long_name="Ice presence"                                                                                                                    unit=""             />
+         <field id="ist_cea"      long_name="Ice surface temperature (cell average)"                       standard_name="surface_temperature"                                unit="degC"         />
+         <field id="ist_ipa"      long_name="Ice surface temperature (ice presence average)"               standard_name="surface_temperature"                                unit="degC"         />      
+         <field id="uice_ipa"     long_name="Ice velocity along i-axis at I-point (ice presence average)"  standard_name="sea_ice_x_velocity"                                 unit="m/s"          />      
+         <field id="vice_ipa"     long_name="Ice velocity along j-axis at I-point (ice presence average)"  standard_name="sea_ice_y_velocity"                                 unit="m/s"          />      
+         
+         <field id="utau_ice"     long_name="Wind stress along i-axis over the ice at i-point"             standard_name="surface_downward_x_stress"                          unit="N/m2"         />
+         <field id="vtau_ice"     long_name="Wind stress along j-axis over the ice at i-point"             standard_name="surface_downward_y_stress"                          unit="N/m2"         />
+         
+         <field id="u_imasstr"    long_name="Sea-ice mass transport along i-axis"                          standard_name="sea_ice_x_transport"                                unit="kg/s"         />
+         <field id="v_imasstr"    long_name="Sea-ice mass transport along j-axis"                          standard_name="sea_ice_y_transport"                                unit="kg/s"         />
+         <field id="emp_x_sst"    long_name="Concentration/Dilution term on SST"                                                                                              unit="kg*degC/m2/s" />
+         <field id="emp_x_sss"    long_name="Concentration/Dilution term on SSS"                                                                                              unit="kg*1e-3/m2/s" />        
+         <field id="rnf_x_sst"    long_name="Runoff term on SST"                                                                                                              unit="kg*degC/m2/s" />
+         <field id="rnf_x_sss"    long_name="Runoff term on SSS"                                                                                                              unit="kg*1e-3/m2/s" />
+       
+         <field id="iceconc"      long_name="ice concentration"                                            standard_name="sea_ice_area_fraction"                              unit="%"            />
+       	 <field id="isst"         long_name="sea surface temperature"                                      standard_name="sea_surface_temperature"                            unit="degC"         />
+         <field id="isss"         long_name="sea surface salinity"                                         standard_name="sea_surface_salinity"                               unit="1e-3"         /> 
+         <field id="qt_oce"       long_name="total flux at ocean surface"                                  standard_name="surface_downward_heat_flux_in_sea_water"            unit="W/m2"         />
+         <field id="qsr_oce"      long_name="solar heat flux at ocean surface"                             standard_name="net_downward_shortwave_flux_at_sea_water_surface"   unit="W/m2"         />
+         <field id="qns_oce"      long_name="non-solar heat flux at ocean surface"                                                                                            unit="W/m2"         />
+         <field id="qt_ice"       long_name="total heat flux at ice surface: sum over categories"          standard_name="surface_downward_heat_flux_in_air"                  unit="W/m2"         />
+         <field id="qsr_ice"      long_name="solar heat flux at ice surface: sum over categories"          standard_name="surface_downwelling_shortwave_flux_in_air"          unit="W/m2"         />
+         <field id="qns_ice"      long_name="non-solar heat flux at ice surface: sum over categories"                                                                         unit="W/m2"         />
+         <field id="qtr_ice"      long_name="solar heat flux transmitted through ice: sum over categories"                                                                    unit="W/m2"         />
+         <field id="qemp_ice"     long_name="Downward Heat Flux from E-P over ice"                                                                                            unit="W/m2"         />
+         <field id="micesalt"     long_name="Mean ice salinity"                                                                                                               unit="1e-3"         />
+         <field id="miceage"      long_name="Mean ice age"                                                                                                                    unit="years"        />
+         <field id="alb_ice"      long_name="Mean albedo over sea ice"                                                                                                        unit=""             />
+         <field id="albedo"       long_name="Mean albedo over sea ice and ocean"                                                                                              unit=""             />
+
+         <field id="iceage_cat"   long_name="Ice age for categories"                                       unit="days"   grid_ref="grid_T_3D_ncatice" />
+         <field id="iceconc_cat"  long_name="Ice concentration for categories"                             unit="%"      grid_ref="grid_T_3D_ncatice" />
+         <field id="icethic_cat"  long_name="Ice thickness for categories"                                 unit="m"      grid_ref="grid_T_3D_ncatice" />
+         <field id="snowthic_cat" long_name="Snow thicknessi for categories"                               unit="m"      grid_ref="grid_T_3D_ncatice" />
+         <field id="salinity_cat" long_name="Sea-Ice Bulk salinity for categories"                         unit="g/kg"   grid_ref="grid_T_3D_ncatice" />
+         <field id="brinevol_cat" long_name="Brine volume for categories"                                  unit="%"      grid_ref="grid_T_3D_ncatice" />
+         <field id="icetemp_cat"  long_name="Ice temperature for categories"                               unit="degC"   grid_ref="grid_T_3D_ncatice" />
+         <field id="snwtemp_cat"  long_name="Snow temperature for categories"                              unit="degC"   grid_ref="grid_T_3D_ncatice" />
+
+         <field id="micet"        long_name="Mean ice temperature"                                         unit="degC"     />
+         <field id="icehc"        long_name="ice total heat content"                                       unit="10^9J"    /> 
+         <field id="isnowhc"      long_name="snow total heat content"                                      unit="10^9J"    />
+         <field id="icest"        long_name="ice surface temperature"                                      unit="degC"     />
+         <field id="ibrinv"       long_name="brine volume"                                                 unit="%"        />
+         <field id="icecolf"      long_name="frazil ice collection thickness"                              unit="m"        />
+         <field id="icestr"       long_name="ice strength"                                                 unit="N/m"      />
+         <field id="icevel"       long_name="ice velocity"                                                 unit="m/s"      />
+         <field id="idive"        long_name="divergence"                                                   unit="1e-8s-1"  />
+         <field id="ishear"       long_name="shear"                                                        unit="1e-8s-1"  />
+         <field id="icevolu"      long_name="ice volume"                                                   unit="m"        />
+         <field id="snowvol"      long_name="snow volume"                                                  unit="m"        />
+
+         <field id="icetrp"       long_name="ice volume transport"                                         unit="m/day"          />
+         <field id="snwtrp"       long_name="snw volume transport"                                         unit="m/day"          />
+         <field id="saltrp"       long_name="salt content transport"                                       unit="1e-3*kg/m2/day" />
+         <field id="deitrp"       long_name="advected ice enthalpy"                                        unit="W/m2"           />
+         <field id="destrp"       long_name="advected snw enthalpy"                                        unit="W/m2"           />
+
+         <field id="sfxbri"       long_name="brine salt flux"                                              unit="1e-3*kg/m2/day" />
+         <field id="sfxdyn"       long_name="salt flux from ridging rafting"                               unit="1e-3*kg/m2/day" />
+         <field id="sfxres"       long_name="salt flux from lipupdate (resultant)"                         unit="1e-3*kg/m2/day" />
+         <field id="sfxbog"       long_name="salt flux from bot growth"                                    unit="1e-3*kg/m2/day" />
+         <field id="sfxbom"       long_name="salt flux from bot melt"                                      unit="1e-3*kg/m2/day" />
+         <field id="sfxsum"       long_name="salt flux from surf melt"                                     unit="1e-3*kg/m2/day" />
+         <field id="sfxsni"       long_name="salt flux from snow-ice formation"                            unit="1e-3*kg/m2/day" />
+         <field id="sfxopw"       long_name="salt flux from open water ice formation"                      unit="1e-3*kg/m2/day" />
+         <field id="sfx"          long_name="salt flux total"                                              unit="1e-3*kg/m2/day" />
+
+         <field id="vfxbog"       long_name="daily bottom thermo ice prod."                                unit="m/day"   />
+         <field id="vfxdyn"       long_name="daily  dynamic ice prod."                                     unit="m/day"   />
+         <field id="vfxopw"       long_name="daily lateral thermo ice prod."                               unit="m/day"   />
+         <field id="vfxsni"       long_name="daily snowice ice prod."                                      unit="m/day"   />
+         <field id="vfxsum"       long_name="surface melt"                                                 unit="m/day"   />
+         <field id="vfxbom"       long_name="bottom melt"                                                  unit="m/day"   />
+         <field id="vfxres"       long_name="daily resultant ice prod./melting from limupdate"             unit="m/day"   />
+         <field id="vfxice"       long_name="ice melt/growth"                                              unit="m/day"   />
+         <field id="vfxsnw"       long_name="snw melt/growth"                                              unit="m/day"   />
+         <field id="vfxsub"       long_name="snw sublimation"                                              unit="m/day"   />
+         <field id="vfxspr"       long_name="snw precipitation on ice"                                     unit="m/day"   />
+         <field id="vfxthin"      long_name="daily thermo ice prod. for thin ice(&lt;20cm) + open water"   unit="m/day"   />
+
+         <field id="afxtot"       long_name="area tendency (total)"                                        unit="day-1"   />
+         <field id="afxdyn"       long_name="area tendency (dynamics)"                                     unit="day-1"   />
+         <field id="afxthd"       long_name="area tendency (thermo)"                                       unit="day-1"   />
+
+         <field id="hfxsum"       long_name="heat fluxes causing surface ice melt"                         unit="W/m2"  />
+         <field id="hfxbom"       long_name="heat fluxes causing bottom ice melt"                          unit="W/m2"  />
+         <field id="hfxbog"       long_name="heat fluxes causing bottom ice growth"                        unit="W/m2"  />
+         <field id="hfxdif"       long_name="heat fluxes causing ice temperature change"                   unit="W/m2"  />
+         <field id="hfxopw"       long_name="heat fluxes causing open water ice formation"                 unit="W/m2"  />
+         <field id="hfxsnw"       long_name="heat fluxes causing snow melt"                                unit="W/m2"  />
+         <field id="hfxerr"       long_name="heat fluxes error after heat diffusion"                       unit="W/m2"  />
+         <field id="hfxerr_rem"   long_name="heat fluxes error after remapping"                            unit="W/m2"  />
+         <field id="hfxout"       long_name="total heat fluxes received by the ocean"                      unit="W/m2"  />
+         <field id="hfxin"        long_name="total heat fluxes at the ice/ocean surface"                   unit="W/m2"  />
+
+         <!-- heat flux associated with mass exchange -->
+         <field id="hfxthd"       long_name="heat fluxes from ice-ocean mass exchange during thermo"       unit="W/m2"  />
+         <field id="hfxdyn"       long_name="heat fluxes from ice-ocean mass exchange during dynamic"      unit="W/m2"  />
+         <field id="hfxres"       long_name="heat fluxes from ice-ocean mass exchange during resultant"    unit="W/m2"  />
+         <field id="hfxsub"       long_name="heat fluxes from ice-atm. mass exchange during sublimation"   unit="W/m2"  />
+         <field id="hfxspr"       long_name="heat fluxes from ice-atm. mass exchange during snow precip"   unit="W/m2"  />
+
+         <!-- diags -->
+         <field id="hfxdhc"       long_name="Heat content variation in snow and ice"                       unit="W/m2" />
+         <field id="hfxtur"       long_name="turbulent heat flux at the ice base"                          unit="W/m2" />
+	 <!-- sbcssm variables -->
+         <field id="sst_m"    unit="degC" />
+         <field id="sss_m"    unit="psu"  />
+         <field id="ssu_m"    unit="m/s"  />
+         <field id="ssv_m"    unit="m/s"  />
+         <field id="ssh_m"    unit="m"    />
+         <field id="e3t_m"    unit="m"    />
+         <field id="frq_m"    unit="-"    />
+
+      </field_group>
+
+      <!-- U grid -->
+      
+      <field_group id="grid_U"   grid_ref="grid_U_2D">
+         <field id="e3u"          long_name="U-cell thickness"                                       standard_name="cell_thickness"              unit="m"          grid_ref="grid_U_3D" />
+         <field id="e3u_0"        long_name="Initial U-cell thickness"                               standard_name="ref_cell_thickness"          unit="m"          grid_ref="grid_U_3D"/>
+         <field id="utau"         long_name="Wind Stress along i-axis"                               standard_name="surface_downward_x_stress"   unit="N/m2"                            />
+         <field id="uoce"         long_name="ocean current along i-axis"                             standard_name="sea_water_x_velocity"        unit="m/s"        grid_ref="grid_U_3D" />
+         <field id="uoce_e3u"     long_name="ocean current along i-axis * e3u"                                                                   unit="m2/s"       grid_ref="grid_U_3D"  > uoce * e3u </field>
+         <field id="ssu"          long_name="ocean surface current along i-axis"                                                                 unit="m/s"                             />
+         <field id="sbu"          long_name="ocean bottom current along i-axis"                                                                  unit="m/s"                             />
+         <field id="ubar"         long_name="ocean barotropic current along i-axis"                                                              unit="m/s"                             />
+         <field id="uocetr_eff"   long_name="Effective ocean transport along i-axis"                 standard_name="ocean_volume_x_transport"    unit="m3/s"       grid_ref="grid_U_3D" />
+         <field id="uocet"        long_name="ocean transport along i-axis times temperature (CRS)"                                               unit="degC*m/s"   grid_ref="grid_U_3D" />
+         <field id="uoces"        long_name="ocean transport along i-axis times salinity (CRS)"                                                  unit="1e-3*m/s"   grid_ref="grid_U_3D" />
+
+         <!-- variables available with MLE -->
+         <field id="psiu_mle"     long_name="MLE streamfunction along i-axis"   unit="m3/s"   grid_ref="grid_U_3D" />
+
+         <!-- uoce_eiv: available with key_traldf_eiv and key_diaeiv -->
+         <field id="uoce_eiv"     long_name="EIV ocean current along i-axis"   standard_name="bolus_sea_water_x_velocity"   unit="m/s"   grid_ref="grid_U_3D" />
+
+         <!-- uoce_eiv: available with key_trabbl -->
+         <field id="uoce_bbl"     long_name="BBL ocean current along i-axis"    unit="m/s"  />
+         <field id="ahu_bbl"      long_name="BBL diffusive flux along i-axis"   unit="m3/s" />
+
+         <!-- variable for ice shelves -->
+         <field id="utbl"         long_name="zonal current in the Losh tbl"     unit="m/s" />
+
+         <!-- variables available with key_diaar5 -->
+         <field id="u_masstr"     long_name="ocean eulerian mass transport along i-axis"    standard_name="ocean_mass_x_transport"                          unit="kg/s"        grid_ref="grid_U_3D" />
+         <field id="u_heattr"     long_name="ocean eulerian heat transport along i-axis"    standard_name="ocean_heat_x_transport"                          unit="W"                                />
+         <field id="u_salttr"     long_name="ocean eulerian salt transport along i-axis"    standard_name="ocean_salt_x_transport"                          unit="1e-3*kg/s"                        />
+         <field id="ueiv_heattr"  long_name="ocean bolus heat transport along i-axis"       standard_name="ocean_heat_x_transport_due_to_bolus_advection"   unit="W"                                />
+         <field id="udiff_heattr" long_name="ocean diffusion heat transport along i-axis"   standard_name="ocean_heat_x_transport_due_to_diffusion"         unit="W"                                />
+      </field_group>
+      
+      <!-- V grid -->
+      
+      <field_group id="grid_V"   grid_ref="grid_V_2D">
+         <field id="e3v"          long_name="V-cell thickness"                                       standard_name="cell_thickness"              unit="m"          grid_ref="grid_V_3D" />
+         <field id="e3v_0"        long_name="Initial V-cell thickness"                               standard_name="ref_cell_thickness"          unit="m"          grid_ref="grid_V_3D"/>
+         <field id="vtau"         long_name="Wind Stress along j-axis"                               standard_name="surface_downward_y_stress"   unit="N/m2"                            />
+         <field id="voce"         long_name="ocean current along j-axis"                             standard_name="sea_water_y_velocity"        unit="m/s"        grid_ref="grid_V_3D" />
+         <field id="voce_e3v"     long_name="ocean current along j-axis * e3v"                                                                   unit="m2/s"       grid_ref="grid_V_3D"  > voce * e3v </field>
+         <field id="ssv"          long_name="ocean surface current along j-axis"                                                                 unit="m/s"                             />
+         <field id="sbv"          long_name="ocean bottom current along j-axis"                                                                  unit="m/s"                             />
+         <field id="vbar"         long_name="ocean barotropic current along j-axis"                                                              unit="m/s"                             />
+         <field id="vocetr_eff"   long_name="Effective ocean transport along j-axis"                 standard_name="ocean_volume_y_transport"    unit="m3/s"       grid_ref="grid_V_3D" />
+         <field id="vocet"        long_name="ocean transport along j-axis times temperature (CRS)"                                               unit="degC*m/s"   grid_ref="grid_V_3D" />
+         <field id="voces"        long_name="ocean transport along j-axis times salinity (CRS)"                                                  unit="1e-3*m/s"   grid_ref="grid_V_3D" />
+
+         <!-- variables available with MLE -->
+         <field id="psiv_mle"     long_name="MLE streamfunction along j-axis"   unit="m3/s"   grid_ref="grid_V_3D" />
+
+         <!-- voce_eiv: available with key_traldf_eiv and key_diaeiv -->
+         <field id="voce_eiv"     long_name="EIV ocean current along j-axis"   standard_name="bolus_sea_water_y_velocity"   unit="m/s"   grid_ref="grid_V_3D" />
+
+         <!-- voce_eiv: available with key_trabbl -->
+         <field id="voce_bbl"     long_name="BBL ocean current along j-axis"    unit="m/s"  />
+         <field id="ahv_bbl"      long_name="BBL diffusive flux along j-axis"   unit="m3/s" />
+
+         <!-- variable for ice shelves -->
+         <field id="vtbl"         long_name="meridional current in the Losh tbl"   unit="m/s" />
+
+         <!-- variables available with key_diaar5 -->
+         <field id="v_masstr"     long_name="ocean eulerian mass transport along j-axis"    standard_name="ocean_mass_y_transport"                          unit="kg/s"        grid_ref="grid_V_3D" />
+         <field id="v_heattr"     long_name="ocean eulerian heat transport along j-axis"    standard_name="ocean_heat_y_transport"                          unit="W"                                />
+         <field id="v_salttr"     long_name="ocean eulerian salt transport along i-axis"    standard_name="ocean_salt_y_transport"                          unit="1e-3*kg/s"                        />
+         <field id="veiv_heattr"  long_name="ocean bolus heat transport along j-axis"       standard_name="ocean_heat_y_transport_due_to_bolus_advection"   unit="W"                                />
+         <field id="vdiff_heattr" long_name="ocean diffusion heat transport along j-axis"   standard_name="ocean_heat_y_transport_due_to_diffusion"         unit="W"                                />
+      </field_group>
+      
+      <!-- W grid -->
+      
+      <field_group id="grid_W" grid_ref="grid_W_3D">
+        <field id="e3w"          long_name="W-cell thickness"                     standard_name="cell_thickness"              unit="m"    />
+        <field id="woce"         long_name="ocean vertical velocity"              standard_name="upward_sea_water_velocity"   unit="m/s"  />
+        <field id="wocetr_eff"   long_name="effective ocean vertical transport"                                               unit="m3/s" />
+
+        <!-- woce_eiv: available with key_traldf_eiv and key_diaeiv -->
+        <field id="woce_eiv"     long_name="EIV ocean vertical velocity"   standard_name="bolus_upward_sea_water_velocity"   unit="m/s" />
+
+        <field id="avt"          long_name="vertical eddy diffusivity"   standard_name="ocean_vertical_heat_diffusivity"       unit="m2/s" />
+        <field id="logavt"       long_name="logarithm of vertical eddy diffusivity"   standard_name="ocean_vertical_heat_diffusivity"       unit="m2/s" />
+        <field id="avm"          long_name="vertical eddy viscosity"     standard_name="ocean_vertical_momentum_diffusivity"   unit="m2/s" />
+
+        <!-- avs: available with key_zdfddm -->
+        <field id="avs"          long_name="salt vertical eddy diffusivity"   standard_name="ocean_vertical_salt_diffusivity"   unit="m2/s" />
+        <field id="logavs"       long_name="logarithm of salt vertical eddy diffusivity"   standard_name="ocean_vertical_heat_diffusivity"       unit="m2/s" />
+
+        <!-- avt_evd and avm_evd: available with ln_zdfevd -->
+        <field id="avt_evd"      long_name="convective enhancement to vertical diffusivity"   standard_name="ocean_vertical_tracer_diffusivity_due_to_convection"     unit="m2/s" />
+        <field id="avm_evd"      long_name="convective enhancement to vertical viscosity"     standard_name="ocean_vertical_momentum_diffusivity_due_to_convection"   unit="m2/s" />
+
+        <!-- avt_tide: available with key_zdftmx -->
+        <field id="av_tide"      long_name="tidal vertical diffusivity"   standard_name="ocean_vertical_tracer_diffusivity_due_to_tides"   unit="m2/s" />
+
+       <!-- variables available with key_zdftmx_new -->
+        <field id="av_ratio"     long_name="S over T diffusivity ratio"            standard_name="salinity_over_temperature_diffusivity_ratio"                     unit="1"    />
+        <field id="av_wave"      long_name="wave-induced vertical diffusivity"     standard_name="ocean_vertical_tracer_diffusivity_due_to_internal_waves"         unit="m2/s" />
+        <field id="bn2"          long_name="squared Brunt-Vaisala frequency"       standard_name="squared_brunt_vaisala_frequency"                                 unit="s-1"  />
+        <field id="bflx_tmx"     long_name="wave-induced buoyancy flux"            standard_name="buoyancy_flux_due_to_internal_waves"                             unit="W/kg" />
+        <field id="pcmap_tmx"    long_name="power consumed by wave-driven mixing"  standard_name="vertically_integrated_power_consumption_by_wave_driven_mixing"   unit="W/m2"      grid_ref="grid_W_2D" />
+        <field id="emix_tmx"     long_name="power density available for mixing"    standard_name="power_available_for_mixing_from_breaking_internal_waves"         unit="W/kg" />
+
+        <!-- variables available with key_diaar5 -->   
+        <field id="w_masstr"     long_name="vertical mass transport"             standard_name="upward_ocean_mass_transport"             unit="kg/s"   />
+        <field id="w_masstr2"    long_name="square of vertical mass transport"   standard_name="square_of_upward_ocean_mass_transport"   unit="kg2/s2" />
+
+        <!-- aht2d and  aht2d_eiv: available with key_traldf_eiv and key_traldf_c2d -->
+        <field id="aht2d"        long_name="lateral eddy diffusivity"       standard_name="ocean_tracer_xy_laplacian_diffusivity"      unit="m2/s"   grid_ref="grid_W_2D" />
+        <field id="aht2d_eiv"    long_name="EIV lateral eddy diffusivity"   standard_name="ocean_tracer_bolus_laplacian_diffusivity"   unit="m2/s"   grid_ref="grid_W_2D" />
+      </field_group>
+          
+      <!-- scalar variables available with key_diaar5 -->
+
+      <field_group id="scalar"  grid_ref="grid_T_2D" >
+         <field id="voltot"     long_name="global total volume"                          standard_name="sea_water_volume"                               unit="m3"   />
+         <field id="sshtot"     long_name="global mean ssh"                              standard_name="global_average_sea_level_change"                unit="m"    />
+         <field id="sshsteric"  long_name="global mean ssh steric"                       standard_name="global_average_steric_sea_level_change"         unit="m"    />
+         <field id="sshthster"  long_name="global mean ssh thermosteric"                 standard_name="global_average_thermosteric_sea_level_change"   unit="m"    />
+         <field id="masstot"    long_name="global total mass"                            standard_name="sea_water_mass"                                 unit="kg"   />
+         <field id="temptot"    long_name="global mean temperature"                      standard_name="sea_water_potential_temperature"                unit="degC" />
+         <field id="saltot"     long_name="global mean salinity"                         standard_name="sea_water_salinity"                             unit="1e-3" />
+         <field id="fram_trans" long_name="Sea Ice Mass Transport Through Fram Strait"   standard_name="sea_ice_transport_across_line"                  unit="kg/s" />
+
+      	 <!-- available with ln_diahsb -->
+    	 <field id="bgtemper"     long_name="drift in global mean temperature wrt timestep 1"                 standard_name="change_over_time_in_sea_water_potential_temperature"   unit="degC"     />
+    	 <field id="bgsaline"     long_name="drift in global mean salinity wrt timestep 1"                    standard_name="change_over_time_in_sea_water_practical_salinity"      unit="1e-3"     />
+    	 <field id="bgheatco"     long_name="drift in global mean heat content wrt timestep 1"                                                                                      unit="10^9J"    />
+    	 <field id="bgsaltco"     long_name="drift in global mean salt content wrt timestep 1"                                                                                      unit="1e-3*m3"  />
+    	 <field id="bgvolssh"     long_name="drift in global mean ssh volume wrt timestep 1"                                                                                        unit="km3"      />
+         <field id="bgvole3t"     long_name="drift in global mean volume variation (e3t) wrt timestep 1"                                                                            unit="km3"      />
+    	 <field id="bgvoltot"     long_name="drift in global mean volume wrt timestep 1"                                                                                            unit="km3"      />
+         <!-- NOTE: No matching iom_put call -->
+    	 <field id="bgsshtot"     long_name="drift in global mean ssh wrt timestep 1"                         standard_name="global_average_sea_level_change"                       unit="m"        />
+    	 <field id="bgfrcvol"     long_name="drift in global mean volume from forcing wrt timestep 1"                                                                               unit="km3"      />
+    	 <field id="bgfrctem"     long_name="drift in global mean heat content from forcing wrt timestep 1"                                                                         unit="10^9J"    />
+    	 <field id="bgfrcsal"     long_name="drift in global mean salt content from forcing wrt timestep 1"                                                                         unit="1e-3*km3" />
+    	 <field id="bgmistem"     long_name="global mean temperature error due to free surface"                                                                                     unit="degC"     />
+    	 <field id="bgmissal"     long_name="global mean salinity error due to free surface"                                                                                        unit="1e-3"     />
+      </field_group>
+
+
+  
+      <!-- variables available with key_float -->
+
+      <field_group id="floatvar" grid_ref="grid_T_nfloat" operation="instant" >
+        <field id="traj_lon"      long_name="floats longitude"                                                           unit="degrees_east"  />
+        <field id="traj_lat"      long_name="floats latitude"                                                            unit="degrees_north" />
+        <field id="traj_dep"      long_name="floats depth"                                                               unit="m"             />
+        <field id="traj_temp"     long_name="floats temperature"       standard_name="sea_water_potential_temperature"   unit="degC"          />
+        <field id="traj_salt"     long_name="floats salinity"          standard_name="sea_water_practical_salinity"      unit="1e-3"          />
+        <field id="traj_dens"     long_name="floats in-situ density"   standard_name="sea_water_density"                 unit="kg/m3"         />
+        <field id="traj_group"    long_name="floats group"                                                               unit="1"             />
+      </field_group>
+
+      <!-- variables available with iceberg trajectories -->
+
+      <field_group id="icbvar" grid_ref="grid_T"  > 
+        <field id="berg_melt"          long_name="icb melt rate of icebergs"                       unit="kg/m2/s"                    />
+        <field id="berg_buoy_melt"     long_name="icb buoyancy component of iceberg melt rate"     unit="kg/m2/s"                    />
+        <field id="berg_eros_melt"     long_name="icb erosion component of iceberg melt rate"      unit="kg/m2/s"                    />
+        <field id="berg_conv_melt"     long_name="icb convective component of iceberg melt rate"   unit="kg/m2/s"                    />
+        <field id="berg_virtual_area"  long_name="icb virtual coverage by icebergs"                unit="m2"                         />
+        <field id="bits_src"           long_name="icb mass source of bergy bits"                   unit="kg/m2/s"                    />
+        <field id="bits_melt"          long_name="icb melt rate of bergy bits"                     unit="kg/m2/s"                    />
+        <field id="bits_mass"          long_name="icb bergy bit density field"                     unit="kg/m2"                      />
+        <field id="berg_mass"          long_name="icb iceberg density field"                       unit="kg/m2"                      />
+        <field id="calving"            long_name="icb calving mass input"                          unit="kg/s"                       />
+        <field id="berg_floating_melt" long_name="icb melt rate of icebergs + bits"                unit="kg/m2/s"                    />
+        <field id="berg_real_calving"  long_name="icb calving into iceberg class"                  unit="kg/s"     grid_ref="grid_icbcla" />
+        <field id="berg_stored_ice"    long_name="icb accumulated ice mass by class"               unit="kg"       grid_ref="grid_icbcla" />
+      </field_group>
+
+      <!-- Poleward transport : ptr -->     
+      <field_group id="diaptr"  > 
+        <field id="zomsfglo"          long_name="Meridional Stream-Function: Global"           unit="Sv"       grid_ref="grid_znl_W_3D" />
+        <field id="zomsfatl"          long_name="Meridional Stream-Function: Atlantic"         unit="Sv"       grid_ref="grid_znl_W_3D" />
+        <field id="zomsfpac"          long_name="Meridional Stream-Function: Pacific"          unit="Sv"       grid_ref="grid_znl_W_3D" />
+        <field id="zomsfind"          long_name="Meridional Stream-Function: Indian"           unit="Sv"       grid_ref="grid_znl_W_3D" />
+        <field id="zomsfipc"          long_name="Meridional Stream-Function: Pacific+Indian"   unit="Sv"       grid_ref="grid_znl_W_3D" />
+        <field id="zotemglo"          long_name="Zonal Mean Temperature : Global"              unit="degC"     grid_ref="grid_znl_T_3D" />
+        <field id="zotematl"          long_name="Zonal Mean Temperature : Atlantic"            unit="degC"     grid_ref="grid_znl_T_3D" />
+        <field id="zotempac"          long_name="Zonal Mean Temperature : Pacific"             unit="degC"     grid_ref="grid_znl_T_3D" />
+        <field id="zotemind"          long_name="Zonal Mean Temperature : Indian"              unit="degC"     grid_ref="grid_znl_T_3D" />
+        <field id="zotemipc"          long_name="Zonal Mean Temperature : Pacific+Indian"      unit="degC"     grid_ref="grid_znl_T_3D" />
+        <field id="zosalglo"          long_name="Zonal Mean Salinity : Global"                 unit="1e-3"     grid_ref="grid_znl_T_3D" />
+        <field id="zosalatl"          long_name="Zonal Mean Salinity : Atlantic"               unit="1e-3"     grid_ref="grid_znl_T_3D" />
+        <field id="zosalpac"          long_name="Zonal Mean Salinity : Pacific"                unit="1e-3"     grid_ref="grid_znl_T_3D" />
+        <field id="zosalind"          long_name="Zonal Mean Salinity : Indian"                 unit="1e-3"     grid_ref="grid_znl_T_3D" />
+        <field id="zosalipc"          long_name="Zonal Mean Salinity : Pacific+Indian"         unit="1e-3"     grid_ref="grid_znl_T_3D" />
+        <field id="zosrfglo"          long_name="Zonal Mean Surface"                           unit="m2"       grid_ref="grid_znl_T_3D" />
+        <field id="zosrfatl"          long_name="Zonal Mean Surface : Atlantic"                unit="m2"       grid_ref="grid_znl_T_3D" />
+        <field id="zosrfpac"          long_name="Zonal Mean Surface : Pacific"                 unit="m2"       grid_ref="grid_znl_T_3D" />
+        <field id="zosrfind"          long_name="Zonal Mean Surface : Indian"                  unit="m2"       grid_ref="grid_znl_T_3D" />
+        <field id="zosrfipc"          long_name="Zonal Mean Surface : Pacific+Indian"          unit="m2"       grid_ref="grid_znl_T_3D" />
+        <field id="sophtadv"          long_name="Advective Heat Transport"                     unit="PW"       grid_ref="grid_znl_T_2D" />
+        <field id="sophtldf"          long_name="Diffusive Heat Transport"                     unit="PW"       grid_ref="grid_znl_T_2D" />
+        <field id="sopstadv"          long_name="Advective Salt Transport"                     unit="Giga g/s" grid_ref="grid_znl_T_2D" />
+        <field id="sopstldf"          long_name="Diffusive Salt Transport"                     unit="Giga g/s" grid_ref="grid_znl_T_2D" />
+      </field_group>
+
+      <field_group id="constant_fields"  grid_ref="grid_T_2D"  operation="once" >
+         <field id="bathy"       long_name="Sea floor depth below geoid"               standard_name="sea_floor_depth_below_geoid"               unit="m"/>
+         <field id="areacello"   long_name="Horizontal area of ocean grid cells"       standard_name="cell_area"                                 unit="m2" />
+      </field_group>
+
+    <!-- 
+============================================================================================================
+                  Physical ocean model trend diagnostics : temperature, KE, PE, momentum
+============================================================================================================
+    -->
+
+    <field_group id="trendT" grid_ref="grid_T_3D">
+      <!-- variables available with ln_tra_trd -->
+      <field id="ttrd_xad"      long_name="temperature-trend: i-advection"                                                                                          unit="degC/s"                        />
+      <field id="strd_xad"      long_name="salinity   -trend: i-advection"                                                                                          unit="1e-3/s"                        />
+      <field id="ttrd_yad"      long_name="temperature-trend: j-advection"                                                                                          unit="degC/s"                        />
+      <field id="strd_yad"      long_name="salinity   -trend: j-advection"                                                                                          unit="1e-3/s"                        />
+      <field id="ttrd_zad"      long_name="temperature-trend: k-advection"                                                                                          unit="degC/s"                        />
+      <field id="strd_zad"      long_name="salinity   -trend: k-advection"                                                                                          unit="1e-3/s"                        />
+      <field id="ttrd_ad"       long_name="temperature-trend: advection"               standard_name="tendency_of_sea_water_temperature_due_to_advection"           unit="degC/s"                         > sqrt( ttrd_xad^2 + ttrd_yad^2 + ttrd_zad^2 ) </field>
+      <field id="strd_ad"       long_name="salinity   -trend: advection"               standard_name="tendency_of_sea_water_salinity_due_to_advection"              unit="1e-3/s"                         > sqrt( strd_xad^2 + strd_yad^2 + strd_zad^2 ) </field>
+      <field id="ttrd_sad"      long_name="temperature-trend: surface adv. (no-vvl)"                                                                                unit="degC/s"   grid_ref="grid_T_2D" />
+      <field id="strd_sad"      long_name="salinity   -trend: surface adv. (no-vvl)"                                                                                unit="1e-3/s"   grid_ref="grid_T_2D" />
+      <field id="ttrd_ldf"      long_name="temperature-trend: lateral  diffusion"      standard_name="tendency_of_sea_water_temperature_due_to_horizontal_mixing"   unit="degC/s"                        />
+      <field id="strd_ldf"      long_name="salinity   -trend: lateral  diffusion"      standard_name="tendency_of_sea_water_salinity_due_to_horizontal_mixing"      unit="1e-3/s"                        />
+      <field id="ttrd_zdf"      long_name="temperature-trend: vertical diffusion"      standard_name="tendency_of_sea_water_temperature_due_to_vertical_mixing"     unit="degC/s"                        />
+      <field id="strd_zdf"      long_name="salinity   -trend: vertical diffusion"      standard_name="tendency_of_sea_water_salinity_due_to_vertical_mixing"        unit="1e-3/s"                        />
+
+      <!-- ln_traldf_iso=T only (iso-neutral diffusion) -->
+      <field id="ttrd_zdfp"     long_name="temperature-trend: pure vert. diffusion"   unit="degC/s" />
+      <field id="strd_zdfp"     long_name="salinity   -trend: pure vert. diffusion"   unit="1e-3/s" />
+
+      <!-- -->
+      <field id="ttrd_dmp"      long_name="temperature-trend: interior restoring"        unit="degC/s" />
+      <field id="strd_dmp"      long_name="salinity   -trend: interior restoring"        unit="1e-3/s" />
+      <field id="ttrd_bbl"      long_name="temperature-trend: bottom boundary layer"     unit="degC/s" />
+      <field id="strd_bbl"      long_name="salinity   -trend: bottom boundary layer"     unit="1e-3/s" />
+      <field id="ttrd_npc"      long_name="temperature-trend: non-penetrative conv."     unit="degC/s" />
+      <field id="strd_npc"      long_name="salinity   -trend: non-penetrative conv."     unit="1e-3/s" />
+      <field id="ttrd_qns"      long_name="temperature-trend: non-solar flux + runoff"   unit="degC/s" />
+      <field id="strd_cdt"      long_name="salinity   -trend: C/D term       + runoff"   unit="degC/s" />
+      <field id="ttrd_qsr"      long_name="temperature-trend: solar penetr. heating"     unit="degC/s" />
+      <field id="ttrd_bbc"      long_name="temperature-trend: geothermal heating"        unit="degC/s" />
+      <field id="ttrd_atf"      long_name="temperature-trend: asselin time filter"       unit="degC/s" />
+      <field id="strd_atf"      long_name="salinity   -trend: asselin time filter"       unit="1e-3/s" />
+
+      <!-- variables available with ln_KE_trd -->
+      <field id="ketrd_hpg"     long_name="ke-trend: hydrostatic pressure gradient"          unit="W/s^3"                        />
+      <field id="ketrd_spg"     long_name="ke-trend: surface     pressure gradient"          unit="W/s^3"                        />
+      <field id="ketrd_spgexp"  long_name="ke-trend: surface pressure gradient (explicit)"   unit="W/s^3"                        />
+      <field id="ketrd_spgflt"  long_name="ke-trend: surface pressure gradient (filter)"     unit="W/s^3"                        />
+      <field id="ssh_flt"       long_name="filtered contribution to ssh (dynspg_flt)"        unit="m"       grid_ref="grid_T_2D" />
+      <field id="w0"            long_name="surface vertical velocity"                        unit="m/s"     grid_ref="grid_T_2D" />
+      <field id="pw0_exp"       long_name="surface pressure flux due to ssh"                 unit="W/s^2"   grid_ref="grid_T_2D" />
+      <field id="pw0_flt"       long_name="surface pressure flux due to filtered ssh"        unit="W/s^2"   grid_ref="grid_T_2D" />
+      <field id="ketrd_keg"     long_name="ke-trend: KE gradient         or hor. adv."       unit="W/s^3"                        />
+      <field id="ketrd_rvo"     long_name="ke-trend: relative  vorticity or metric term"     unit="W/s^3"                        />
+      <field id="ketrd_pvo"     long_name="ke-trend: planetary vorticity"                    unit="W/s^3"                        />
+      <field id="ketrd_zad"     long_name="ke-trend: vertical  advection"                    unit="W/s^3"                        />
+      <field id="ketrd_udx"     long_name="ke-trend: U.dx[U]"                                unit="W/s^3"                        />
+      <field id="ketrd_ldf"     long_name="ke-trend: lateral   diffusion"                    unit="W/s^3"                        />
+      <field id="ketrd_zdf"     long_name="ke-trend: vertical  diffusion"                    unit="W/s^3"                        />
+      <field id="ketrd_tau"     long_name="ke-trend: wind stress "                           unit="W/s^3"   grid_ref="grid_T_2D" />
+      <field id="ketrd_bfr"     long_name="ke-trend: bottom friction (explicit)"             unit="W/s^3"                        />   
+      <field id="ketrd_bfri"    long_name="ke-trend: bottom friction (implicit)"             unit="W/s^3"                        />   
+      <field id="ketrd_atf"     long_name="ke-trend: asselin time filter trend"              unit="W/s^3"                        />  
+      <field id="ketrd_convP2K" long_name="ke-trend: conversion (potential to kinetic)"      unit="W/s^3"                        />
+      <field id="KE"            long_name="kinetic energy: u(n)*u(n+1)/2"                    unit="W/s^2"                        />   
+
+      <!-- variables available with ln_PE_trd -->
+      <field id="petrd_xad"     long_name="pe-trend: i-advection"                unit="W/m^3"                        />
+      <field id="petrd_yad"     long_name="pe-trend: j-advection"                unit="W/m^3"                        />
+      <field id="petrd_zad"     long_name="pe-trend: k-advection"                unit="W/m^3"                        />
+      <field id="petrd_sad"     long_name="pe-trend: surface adv. (no-vvl)"      unit="W/m^3"   grid_ref="grid_T_2D" />
+      <field id="petrd_ldf"     long_name="pe-trend: lateral  diffusion"         unit="W/m^3"                        />
+      <field id="petrd_zdf"     long_name="pe-trend: vertical diffusion"         unit="W/m^3"                        />
+      <field id="petrd_zdfp"    long_name="pe-trend: pure vert. diffusion"       unit="W/m^3"                        />
+      <field id="petrd_dmp"     long_name="pe-trend: interior restoring"         unit="W/m^3"                        />
+      <field id="petrd_bbl"     long_name="pe-trend: bottom boundary layer"      unit="W/m^3"                        />
+      <field id="petrd_npc"     long_name="pe-trend: non-penetrative conv."      unit="W/m^3"                        />
+      <field id="petrd_nsr"     long_name="pe-trend: surface forcing + runoff"   unit="W/m^3"                        />
+      <field id="petrd_qsr"     long_name="pe-trend: solar penetr. heating"      unit="W/m^3"                        />
+      <field id="petrd_bbc"     long_name="pe-trend: geothermal heating"         unit="W/m^3"                        />
+      <field id="petrd_atf"     long_name="pe-trend: asselin time filter"        unit="W/m^3"                        />
+      <field id="PEanom"        long_name="potential energy anomaly"             unit="1"                            />   
+      <field id="alphaPE"       long_name="partial deriv. of PEanom wrt T"       unit="degC-1"                       />   
+      <field id="betaPE"        long_name="partial deriv. of PEanom wrt S"       unit="1e3"                          />   
+    </field_group>
+
+    <field_group id="trendU" grid_ref="grid_U_3D">
+     <!-- variables available with ln_dyn_trd -->
+     <field id="utrd_hpg"       long_name="i-trend: hydrostatic pressure gradient"          unit="m/s^2"                        />
+     <field id="utrd_spg"       long_name="i-trend: surface     pressure gradient"          unit="m/s^2"                        />
+     <field id="utrd_spgexp"    long_name="i-trend: surface pressure gradient (explicit)"   unit="m/s^2"                        />
+     <field id="utrd_spgflt"    long_name="i-trend: surface pressure gradient (filtered)"   unit="m/s^2"                        />
+     <field id="utrd_keg"       long_name="i-trend: KE gradient         or hor. adv."       unit="m/s^2"                        />
+     <field id="utrd_rvo"       long_name="i-trend: relative  vorticity or metric term"     unit="m/s^2"                        />
+     <field id="utrd_pvo"       long_name="i-trend: planetary vorticity"                    unit="m/s^2"                        />
+     <field id="utrd_zad"       long_name="i-trend: vertical  advection"                    unit="m/s^2"                        />
+     <field id="utrd_udx"       long_name="i-trend: U.dx[U]"                                unit="m/s^2"                        />
+     <field id="utrd_ldf"       long_name="i-trend: lateral   diffusion"                    unit="m/s^2"                        />
+     <field id="utrd_zdf"       long_name="i-trend: vertical  diffusion"                    unit="m/s^2"                        />
+     <field id="utrd_tau"       long_name="i-trend: wind stress "                           unit="m/s^2"   grid_ref="grid_U_2D" />
+     <field id="utrd_bfr"       long_name="i-trend: bottom friction (explicit)"             unit="m/s^2"                        />   
+     <field id="utrd_bfri"      long_name="i-trend: bottom friction (implicit)"             unit="m/s^2"                        />   
+     <field id="utrd_tot"       long_name="i-trend: total momentum trend before atf"        unit="m/s^2"                        />   
+     <field id="utrd_atf"       long_name="i-trend: asselin time filter trend"              unit="m/s^2"                        />   
+    </field_group>
+
+    <field_group id="trendV" grid_ref="grid_V_3D">
+     <!-- variables available with ln_dyn_trd -->
+     <field id="vtrd_hpg"       long_name="j-trend: hydrostatic pressure gradient"          unit="m/s^2"                        />
+     <field id="vtrd_spg"       long_name="j-trend: surface     pressure gradient"          unit="m/s^2"                        />
+     <field id="vtrd_spgexp"    long_name="j-trend: surface pressure gradient (explicit)"   unit="m/s^2"                        />
+     <field id="vtrd_spgflt"    long_name="j-trend: surface pressure gradient (filtered)"   unit="m/s^2"                        />
+     <field id="vtrd_keg"       long_name="j-trend: KE gradient         or hor. adv."       unit="m/s^2"                        />
+     <field id="vtrd_rvo"       long_name="j-trend: relative  vorticity or metric term"     unit="m/s^2"                        />
+     <field id="vtrd_pvo"       long_name="j-trend: planetary vorticity"                    unit="m/s^2"                        />
+     <field id="vtrd_zad"       long_name="j-trend: vertical  advection"                    unit="m/s^2"                        />
+     <field id="vtrd_vdy"       long_name="i-trend: V.dx[V]"                                unit="m/s^2"                        />
+     <field id="vtrd_ldf"       long_name="j-trend: lateral   diffusion"                    unit="m/s^2"                        />
+     <field id="vtrd_zdf"       long_name="j-trend: vertical  diffusion"                    unit="m/s^2"                        />
+     <field id="vtrd_tau"       long_name="j-trend: wind stress "                           unit="m/s^2"   grid_ref="grid_V_2D" />
+     <field id="vtrd_bfr"       long_name="j-trend: bottom friction (explicit)"             unit="m/s^2"                        />   
+     <field id="vtrd_bfri"      long_name="j-trend: bottom friction (implicit)"             unit="m/s^2"                        />   
+     <field id="vtrd_tot"       long_name="j-trend: total momentum trend before atf"        unit="m/s^2"                        />   
+     <field id="vtrd_atf"       long_name="j-trend: asselin time filter trend"              unit="m/s^2"                        />   
+    </field_group>
+
+
+    <!-- 
+============================================================================================================
+                                        Definitions for iodef_demo.xml
+============================================================================================================
+    -->
+
+    <field_group id="mooring" >
+      <field field_ref="toce"         name="thetao"   long_name="sea_water_potential_temperature"      />
+      <field field_ref="soce"         name="so"       long_name="sea_water_salinity"                   />
+      <field field_ref="uoce"         name="uo"       long_name="sea_water_x_velocity"                 />
+      <field field_ref="voce"         name="vo"       long_name="sea_water_y_velocity"                 />
+      <field field_ref="woce"         name="wo"       long_name="sea_water_z_velocity"                 />
+      <field field_ref="avt"          name="difvho"   long_name="ocean_vertical_heat_diffusivity"      />
+      <field field_ref="avm"          name="difvmo"   long_name="ocean_vertical_momentum_diffusivity"  />
+   
+      <field field_ref="sst"          name="tos"      long_name="sea_surface_temperature"                       />
+      <field field_ref="sst2"         name="tossq"    long_name="square_of_sea_surface_temperature"             />
+      <field field_ref="sstgrad"      name="tosgrad"  long_name="module_of_sea_surface_temperature_gradient"    />
+      <field field_ref="sss"          name="sos"      long_name="sea_surface_salinity"                          />
+      <field field_ref="ssh"          name="zos"      long_name="sea_surface_height_above_geoid"                />
+      <field field_ref="empmr"        name="wfo"      long_name="water_flux_into_sea_water"                     />
+      <field field_ref="qsr"          name="rsntds"   long_name="surface_net_downward_shortwave_flux"           />
+      <field field_ref="qt"           name="tohfls"   long_name="surface_net_downward_total_heat_flux"          />
+      <field field_ref="taum"                                                                                   />
+      <field field_ref="20d"                                                                                    />
+      <field field_ref="mldkz5"                                                                                 />
+      <field field_ref="mldr10_1"                                                                               />
+      <field field_ref="mldr10_3"                                                                               />
+      <field field_ref="mldr0_1"                                                                                />
+      <field field_ref="mldr0_3"                                                                                />
+      <field field_ref="mld_dt02"                                                                               />
+      <field field_ref="topthdep"                                                                               />
+      <field field_ref="pycndep"                                                                                />
+      <field field_ref="tinv"                                                                                   />
+      <field field_ref="depti"                                                                                  />
+      <field field_ref="BLT"          name="blt"      long_name="barrier_layer_thickness"                       />
+      <field field_ref="utau"         name="tauuo"    long_name="surface_downward_x_stress"                     />
+      <field field_ref="vtau"         name="tauvo"    long_name="surface_downward_y_stress"                     />
+    </field_group>
+
+    <field_group id="groupT" >
+      <field field_ref="toce"         name="thetao"   long_name="sea_water_potential_temperature"               />
+      <field field_ref="soce"         name="so"       long_name="sea_water_salinity"                            />
+      <field field_ref="sst"          name="tos"      long_name="sea_surface_temperature"                       />
+      <field field_ref="sst2"         name="tossq"    long_name="square_of_sea_surface_temperature"             />
+      <field field_ref="sss"          name="sos"      long_name="sea_surface_salinity"                          />
+      <field field_ref="ssh"          name="zos"      long_name="sea_surface_height_above_geoid"                />
+      <field field_ref="empmr"        name="wfo"      long_name="water_flux_into_sea_water"                     />
+      <field field_ref="qsr"          name="rsntds"   long_name="surface_net_downward_shortwave_flux"           />
+      <field field_ref="qt"           name="tohfls"   long_name="surface_net_downward_total_heat_flux"          />
+      <field field_ref="taum"                                                                                   />
+      <field field_ref="20d"                                                                                    />
+      <field field_ref="mldkz5"                                                                                 />
+      <field field_ref="mldr10_1"                                                                               />
+      <field field_ref="mldr10_3"                                                                               />
+      <field field_ref="mld_dt02"                                                                               />
+      <field field_ref="topthdep"                                                                               />
+      <field field_ref="pycndep"                                                                                />
+      <field field_ref="tinv"                                                                                   />
+      <field field_ref="depti"                                                                                  />
+      <field field_ref="BLT"          name="blt"      long_name="Barrier Layer Thickness"                       />
+    </field_group>
+    
+    <field_group id="groupU" >
+      <field field_ref="uoce"         name="uo"      long_name="sea_water_x_velocity"      />
+      <field field_ref="ssu"          name="uos"     long_name="sea_surface_x_velocity"    />
+      <field field_ref="utau"         name="tauuo"   long_name="surface_downward_x_stress" />
+    </field_group>
+    
+    <field_group id="groupV" >
+      <field field_ref="voce"         name="vo"      long_name="sea_water_y_velocity"      />
+      <field field_ref="ssv"          name="vos"     long_name="sea_surface_y_velocity"    />
+      <field field_ref="vtau"         name="tauvo"   long_name="surface_downward_y_stress" />
+    </field_group>
+    
+    <field_group id="groupW" >
+      <field field_ref="woce"         name="wo"       long_name="ocean vertical velocity"  />
+    </field_group>
+
+     <field_group id="groupPTR"  >
+        <field field_ref="zomsfglo"          name="zomsfglo"  grid_ref="grid_ptr_W_3D" />
+        <field field_ref="zomsfatl"          name="zomsfatl"  grid_ref="grid_ptr_W_3D" />
+        <field field_ref="zomsfpac"          name="zomsfpac"  grid_ref="grid_ptr_W_3D" />
+        <field field_ref="zomsfind"          name="zomsfind"  grid_ref="grid_ptr_W_3D" />
+        <field field_ref="zomsfipc"          name="zomsfipc"  grid_ref="grid_ptr_W_3D" />
+        <field field_ref="zotemglo"          name="zotemglo"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zotematl"          name="zotematl"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zotempac"          name="zotempac"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zotemind"          name="zotemind"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zotemipc"          name="zotemipc"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosalglo"          name="zosalglo"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosalatl"          name="zosalatl"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosalpac"          name="zosalpac"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosalind"          name="zosalind"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosalipc"          name="zosalipc"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosrfglo"          name="zosrfglo"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosrfatl"          name="zosrfatl"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosrfpac"          name="zosrfpac"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosrfind"          name="zosrfind"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="zosrfipc"          name="zosrfipc"  grid_ref="grid_ptr_T_3D" />
+        <field field_ref="sophtadv"          name="sophtadv"  grid_ref="grid_ptr_T_2D" />
+        <field field_ref="sophtldf"          name="sophtldf"  grid_ref="grid_ptr_T_2D" />
+        <field field_ref="sopstadv"          name="sopstadv"  grid_ref="grid_ptr_T_2D" />
+        <field field_ref="sopstldf"          name="sopstldf"  grid_ref="grid_ptr_T_2D" />
+      </field_group>
+    
+
+   </field_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-pisces.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-pisces.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_nemo-pisces.xml	(revision 5893)
@@ -0,0 +1,224 @@
+<?xml version="1.0"?> 
+    <!-- $id$ -->
+    
+    <!-- 
+============================================================================================================
+=                                  definition of all existing variables                                    =
+=                                            DO NOT CHANGE                                                 =
+============================================================================================================
+    -->
+   <field_definition level="1" prec="4" operation="average" enabled=".TRUE." default_value="1.e20" > <!-- time step automaticaly defined -->
+
+    <!-- 
+============================================================================================================
+                                     Biogeochemistry model variables
+============================================================================================================
+    -->
+
+      <!-- ptrc on T grid -->
+
+     <field_group id="ptrc_T" grid_ref="grid_T_3D">
+       <field id="DIC"          long_name="Dissolved inorganic Concentration"        unit="mmol/m3" />
+       <field id="DIC_E3T"      long_name="DIC * E3T"                                unit="mmol/m2" > DIC * e3t </field >
+       <field id="Alkalini"     long_name="Total Alkalinity Concentration"           unit="mmol/m3" />
+       <field id="Alkalini_E3T" long_name="Alkalini * E3T"                           unit="mmol/m2"  > Alkalini * e3t </field >
+       <field id="O2"           long_name="Oxygen Concentration"                     unit="mmol/m3" />
+       <field id="O2_E3T"       long_name="O2 * E3T"                                 unit="mmol/m2"  > O2 * e3t </field >
+       <field id="CaCO3"        long_name="Calcite Concentration"                    unit="mmol/m3" />
+       <field id="CaCO3_E3T"    long_name="CaCO3 * E3T"                              unit="mmol/m2"  > CaCO3 * e3t </field >
+       <field id="PO4"          long_name="Phosphate Concentration"                  unit="mmol/m3" />
+       <field id="PO4_E3T"      long_name="PO4 * E3T"                                unit="mmol/m2"  > PO4 * e3t </field >
+       <field id="POC"          long_name="Small organic carbon Concentration"       unit="mmol/m3" />
+       <field id="POC_E3T"      long_name="POC * E3T"                                unit="mmol/m2"  > POC * e3t </field >
+       <field id="Si"           long_name="Silicate Concentration"                   unit="mmol/m3" />
+       <field id="Si_E3T"       long_name="Si * E3T"                                 unit="mmol/m2"  > Si * e3t </field >
+       <field id="PHY"          long_name="(Nano)Phytoplankton Concentration"        unit="mmol/m3" />
+       <field id="PHY_E3T"      long_name="PHY * E3T"                                unit="mmol/m2"  > PHY * e3t </field >
+       <field id="ZOO"          long_name="(Micro)Zooplankton Concentration"         unit="mmol/m3" />
+       <field id="ZOO_E3T"      long_name="ZOO2 * E3T"                               unit="mmol/m2"  > ZOO * e3t </field >
+       <field id="DOC"          long_name="Dissolved organic Concentration"          unit="mmol/m3" />
+       <field id="DOC_E3T"      long_name="DOC * E3T"                                unit="mmol/m2"  > DOC * e3t </field >
+       <field id="PHY2"         long_name="Diatoms Concentration"                    unit="mmol/m3" />
+       <field id="PHY2_E3T"     long_name="PHY2 * E3T"                               unit="mmol/m2"  > PHY2 * e3t </field >
+       <field id="ZOO2"         long_name="Mesozooplankton Concentration"            unit="mmol/m3" />
+       <field id="ZOO2_E3T"     long_name="ZOO2 * E3T"                               unit="mmol/m2"  > ZOO2 * e3t </field >
+       <field id="DSi"          long_name="Diatoms Silicate Concentration"           unit="mmol/m3" />
+       <field id="DSi_E3T"      long_name="Dsi * E3T"                                unit="mmol/m2"  > DSi * e3t </field >
+       <field id="Fer"          long_name="Dissolved Iron Concentration"             unit="mmol/m3" />
+       <field id="Fer_E3T"      long_name="Fer * E3T"                                unit="mmol/m2"  > Fer * e3t </field >
+       <field id="BFe"          long_name="Big iron particles Concentration"         unit="mmol/m3" />
+       <field id="BFe_E3T"      long_name="BFe * E3T"                                unit="mmol/m2"  > BFe * e3t </field >
+       <field id="GOC"          long_name="Big organic carbon Concentration"         unit="mmol/m3" />
+       <field id="GOC_E3T"      long_name="GOC * E3T"                                unit="mmol/m2"  > GOC * e3t </field >
+       <field id="SFe"          long_name="Small iron particles Concentration"       unit="mmol/m3" />
+       <field id="SFe_E3T"      long_name="SFe * E3T"                                unit="mmol/m2"  > SFe * e3t </field >
+       <field id="DFe"          long_name="Diatoms iron  Concentration"              unit="mmol/m3" />
+       <field id="DFe_E3T"      long_name="DFe * E3T"                                unit="mmol/m2"  > DFe * e3t </field >
+       <field id="GSi"          long_name="Sinking biogenic Silicate Concentration"  unit="mmol/m3" />
+       <field id="GSi_E3T"      long_name="GSi * E3T"                                unit="mmol/m2"  > GSi * e3t </field >
+       <field id="NFe"          long_name="Nano iron Concentration"                  unit="mmol/m3" />
+       <field id="NFe_E3T"      long_name="NFe * E3T"                                unit="mmol/m2"  > NFe * e3t </field >
+       <field id="NCHL"         long_name="Nano chlorophyl Concentration"            unit="mg/m3"   />
+       <field id="NCHL_E3T"     long_name="NCHL * E3T"                               unit="mmol/m2"  > NCHL * e3t </field >
+       <field id="DCHL"         long_name="Diatoms chlorophyl Concentration"         unit="mg/m3"   />
+       <field id="DCHL_E3T"     long_name="DCHL * E3T"                               unit="mmol/m2"  > DCHL * e3t </field >
+       <field id="NO3"          long_name="Nitrate Concentration"                    unit="mmol/m3" />
+       <field id="NO3_E3T"      long_name="NO3 * E3T"                                unit="mmol/m2"  > NO3 * e3t </field >
+       <field id="NH4"          long_name="Ammonium Concentration"                   unit="mmol/m3" />
+       <field id="NH4_E3T"      long_name="NH4 * E3T"                                unit="mmol/m2"  > NH4 * e3t </field >
+
+       <!-- PISCES with Kriest parametisation : variables available with key_kriest -->
+       <field id="Num"         long_name="Number of organic particles"              unit="1" />
+       <field id="Num_E3T"     long_name="Num * E3T"                                unit="m"  > Num * e3t </field >
+
+       <!-- PISCES light : variables available with key_pisces_reduced -->
+       <field id="DET"         long_name="Detritus"                                 unit="mmol-N/m3" />
+       <field id="DET_E3T"     long_name="DET * E3T"                                unit="mmol-N/m2"  > DET * e3t </field >
+       <field id="DOM"         long_name="Dissolved Organic Matter"                 unit="mmol-N/m3" />
+       <field id="DOM_E3T"     long_name="DOM * E3T"                                unit="mmol-N/m2"  > DOM * e3t </field >
+
+       <!-- CFC11 : variables available with key_cfc -->
+       <field id="CFC11"       long_name="CFC-11 Concentration"                     unit="umol/m3" />
+       <field id="CFC11_E3T"   long_name="CFC11 * E3T"                              unit="umol/m2"  > CFC11 * e3t </field >
+       <!-- Bomb C14 : variables available with key_c14b -->
+       <field id="C14B"     long_name="Bomb C14 Concentration"                      unit="1"         />
+       <field id="C14B_E3T"    long_name="C14B * E3T"                               unit="m"  > C14B * e3t </field >
+     </field_group>
+
+     <!-- PISCES additional diagnostics on T grid  -->
+
+     <field_group id="diad_T" grid_ref="grid_T_2D">
+       <field id="PH"          long_name="PH"                                      unit="1"          grid_ref="grid_T_3D" />
+       <field id="CO3"         long_name="Bicarbonates"                            unit="mol/m3"     grid_ref="grid_T_3D" />
+       <field id="CO3sat"      long_name="CO3 saturation"                          unit="mol/m3"     grid_ref="grid_T_3D" />
+       <field id="PAR"         long_name="Photosynthetically Available Radiation"  unit="W/m2"       grid_ref="grid_T_3D" />
+       <field id="PARDM"       long_name="Daily mean PAR"                          unit="W/m2"       grid_ref="grid_T_3D" />
+       <field id="PPPHY"       long_name="Primary production of nanophyto"         unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="PPPHY2"      long_name="Primary production of diatoms"           unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="PPNEWN"      long_name="New Primary production of nanophyto"     unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="PPNEWD"      long_name="New Primary production of diatoms"       unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="PBSi"        long_name="Primary production of Si diatoms"        unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="PFeN"        long_name="Primary production of nano iron"         unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="PFeD"        long_name="Primary production of diatoms iron"      unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="xfracal"     long_name="Calcifying fraction"                     unit="1"          grid_ref="grid_T_3D" />
+       <field id="PCAL"        long_name="Calcite production"                      unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="DCAL"        long_name="Calcite dissolution"                     unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="GRAZ1"       long_name="Grazing by microzooplankton"             unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="GRAZ2"       long_name="Grazing by mesozooplankton"              unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="REMIN"       long_name="Oxic remineralization of OM"             unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="DENIT"       long_name="Anoxic remineralization of OM"           unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="Nfix"        long_name="Nitrogen fixation"                       unit="mol/m3/s"   grid_ref="grid_T_3D" />
+       <field id="Mumax"       long_name="Maximum growth rate"                     unit="s-1"        grid_ref="grid_T_3D" />
+       <field id="MuN"         long_name="Realized growth rate for nanophyto"      unit="s-1"        grid_ref="grid_T_3D" />
+       <field id="MuD"         long_name="Realized growth rate for diatomes"       unit="s-1"        grid_ref="grid_T_3D" />
+       <field id="LNnut"       long_name="Nutrient limitation term in Nanophyto"   unit=""           grid_ref="grid_T_3D" />
+       <field id="LDnut"       long_name="Nutrient limitation term in Diatoms"     unit=""           grid_ref="grid_T_3D" />
+       <field id="LNFe"        long_name="Iron limitation term in Nanophyto"       unit=""           grid_ref="grid_T_3D" />
+       <field id="LDFe"        long_name="Iron limitation term in Diatoms"         unit=""           grid_ref="grid_T_3D" />
+       <field id="LNlight"     long_name="Light limitation term in Nanophyto"      unit=""           grid_ref="grid_T_3D" />
+       <field id="LDlight"     long_name="Light limitation term in Diatoms"        unit=""           grid_ref="grid_T_3D" />
+       <field id="Fe2"         long_name="Iron II concentration"                   unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="Fe3"         long_name="Iron III concentration"                  unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="FeL1"        long_name="Complexed Iron concentration with L1"    unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="FeL2"        long_name="Complexed Iron concentration with L2"    unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="FeP"         long_name="Precipitated Iron III"                   unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="TL1"         long_name="Total L1 concentration"                  unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="TL2"         long_name="Total L2 concentration"                  unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="pdust"       long_name="dust concentration"                      unit="g/m3"                            />
+       <field id="Totlig"      long_name="Total ligand concentation"               unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="Biron"       long_name="Bioavailable iron"                       unit="nmol/m3"    grid_ref="grid_T_3D" />
+       <field id="Sdenit"      long_name="Nitrate reduction in the sediments"      unit="molN/m2/s"                       />
+       <field id="SedCal"      long_name="Calcite burial in the sediments"         unit="molC/m2/s"                       />
+       <field id="SedSi"       long_name="Silicon burial in the sediments"         unit="molSi/m2/s"                      />
+       <field id="SedC"        long_name="Organic C burial in the sediments"       unit="molC/m2/s"                       />
+       <field id="Ironice"     long_name="Iron input/uptake due to sea ice"        unit="mol/m2/s"                        />
+       <field id="HYDR"        long_name="Iron input from hydrothemal vents"       unit="mol/m2/s"   grid_ref="grid_T_3D" />
+       <field id="EPC100"      long_name="Export of carbon particles at 100 m"     unit="mol/m2/s"                        />
+       <field id="EPFE100"     long_name="Export of biogenic iron at 100 m"        unit="mol/m2/s"                        />
+       <field id="EPSI100"     long_name="Export of Silicate at 100 m"             unit="mol/m2/s"                        />
+       <field id="EPCAL100"    long_name="Export of Calcite at 100 m"              unit="mol/m2/s"                        />
+       <field id="EXPC"        long_name="Export of carbon"                        unit="mol/m2/s"   grid_ref="grid_T_3D" />
+       <field id="EXPFE"       long_name="Export of biogenic iron"                 unit="mol/m2/s"   grid_ref="grid_T_3D" />
+       <field id="EXPSI"       long_name="Export of Silicate"                      unit="mol/m2/s"   grid_ref="grid_T_3D" />
+       <field id="EXPCAL"      long_name="Export of Calcite"                       unit="mol/m2/s"   grid_ref="grid_T_3D" />
+       <field id="Cflx"        long_name="DIC flux"                                unit="mol/m2/s"                        />
+       <field id="Oflx"        long_name="Oxygen flux"                             unit="mol/m2/s"                        />
+       <field id="Kg"          long_name="Gas transfer"                            unit="mol/m2/s/uatm"                   />
+       <field id="Dpco2"       long_name="Delta CO2"                               unit="uatm"                            />
+       <field id="Dpo2"        long_name="Delta O2"                                unit="uatm"                            />
+       <field id="Heup"        long_name="Euphotic layer depth"                    unit="m"                               />
+       <field id="Irondep"     long_name="Iron deposition from dust"               unit="mol/m2/s"                        />
+       <field id="Ironsed"     long_name="Iron deposition from sediment"           unit="mol/m2/s"   grid_ref="grid_T_3D" />
+
+
+       <!-- PISCES with Kriest parametisation : variables available with key_kriest -->
+       <field id="EPN100"      long_name="Particulate number flux at 100 m"        unit="mol/m2/s"                        />
+       <field id="EXPN"        long_name="Particulate number flux"                 unit="mol/m2/s"   grid_ref="grid_T_3D" />
+       <field id="XNUM"        long_name="Number of particles in aggregats"        unit="1"          grid_ref="grid_T_3D" />
+       <field id="WSC"         long_name="sinking speed of mass flux"              unit="m2/s"       grid_ref="grid_T_3D" />
+       <field id="WSN"         long_name="sinking speed of number flux"            unit="m2/s"       grid_ref="grid_T_3D" />
+
+       <!-- dbio_T on T grid : variables available with key_diaar5 -->
+       <field id="TPP"         long_name="Total Primary production of phyto"                   unit="mol/m3/s"  grid_ref="grid_T_3D" />
+       <field id="TPNEW"       long_name="New Primary production of phyto"                     unit="mol/m3/s"  grid_ref="grid_T_3D" />
+       <field id="TPBFE"       long_name="Total biogenic iron production"                      unit="mol/m3/s"  grid_ref="grid_T_3D" />
+       <field id="INTDIC"      long_name="DIC content"                                         unit="kg/m2"                          />
+       <field id="O2MIN"       long_name="Oxygen minimum concentration"                        unit="mol/m3"                          />
+       <field id="ZO2MIN"      long_name="Depth of oxygen minimum concentration"               unit="m"                              />
+       <field id="INTNFIX"     long_name="Nitrogen fixation rate : vert. integrated"           unit="mol/m2/s"                       />
+       <field id="INTPPPHY"    long_name="Vertically integrated primary production by nanophy" unit="mol/m2/s"                       />
+       <field id="INTPPPHY2"   long_name="Vertically integrated primary production by diatom"  unit="mol/m2/s"                       />
+       <field id="INTPP"       long_name="Vertically integrated primary production by phyto"   unit="mol/m2/s"                       />
+       <field id="INTPNEW"     long_name="Vertically integrated new primary production"        unit="mol/m2/s"                       />
+       <field id="INTPBFE"     long_name="Vertically integrated of biogenic iron production"   unit="mol/m2/s"                       />
+       <field id="INTPBSI"     long_name="Vertically integrated of biogenic Si production"     unit="mol/m2/s"                       />
+       <field id="INTPCAL"     long_name="Vertically integrated of calcite production"         unit="mol/m2/s"                       />
+
+       <!-- PISCES light : variables available with key_pisces_reduced -->
+       <field id="FNO3PHY"     long_name="FNO3PHY"                                 unit=""          grid_ref="grid_T_3D" /> 
+       <field id="FNH4PHY"     long_name="FNH4PHY"                                 unit=""          grid_ref="grid_T_3D" /> 
+       <field id="FNH4NO3"     long_name="FNH4NO3"                                 unit=""          grid_ref="grid_T_3D" /> 
+       <field id="TNO3PHY"     long_name="TNO3PHY"                                 unit=""  /> 
+       <field id="TNH4PHY"     long_name="TNH4PHY"                                 unit=""  /> 
+       <field id="TPHYDOM"     long_name="TPHYDOM"                                 unit=""  /> 
+       <field id="TPHYNH4"     long_name="TPHYNH4"                                 unit=""  /> 
+       <field id="TPHYZOO"     long_name="TPHYZOO"                                 unit=""  /> 
+       <field id="TPHYDET"     long_name="TPHYDET"                                 unit=""  /> 
+       <field id="TDETZOO"     long_name="TDETZOO"                                 unit=""  /> 
+       <field id="TZOODET"     long_name="TZOODET"                                 unit=""  /> 
+       <field id="TZOOBOD"     long_name="TZOOBOD"                                 unit=""  /> 
+       <field id="TZOONH4"     long_name="TZOONH4"                                 unit=""  /> 
+       <field id="TZOODOM"     long_name="TZOODOM"                                 unit=""  /> 
+       <field id="TNH4NO3"     long_name="TNH4NO3"                                 unit=""  /> 
+       <field id="TDOMNH4"     long_name="TDOMNH4"                                 unit=""  /> 
+       <field id="TDETNH4"     long_name="TDETNH4"                                 unit=""  /> 
+       <field id="TPHYTOT"     long_name="TPHYTOT"                                 unit=""  /> 
+       <field id="TZOOTOT"     long_name="TZOOTOT"                                 unit=""  /> 
+       <field id="SEDPOC"      long_name="SEDPOC"                                  unit=""  /> 
+       <field id="TDETSED"     long_name="TDETSED"                                 unit=""  /> 
+
+       <!-- CFC11 : variables available with key_cfc -->
+       <field id="qtrCFC11"    long_name="Air-sea flux of CFC-11"                  unit="mol/m2/s"   />
+       <field id="qintCFC11"   long_name="Cumulative air-sea flux of CFC-11"       unit="mol/m2"     />
+
+       <!-- Bomb C14 : variables available with key_c14b -->
+       <field id="qtrC14b"     long_name="Air-sea flux of Bomb C14"                unit="mol/m2/s"   />
+       <field id="qintC14b"    long_name="Cumulative air-sea flux of Bomb C14"     unit="mol/m2"     />
+       <field id="fdecay"      long_name="Radiactive decay of Bomb C14"            unit="mol/m3"  grid_ref="grid_T_3D"  />
+     </field_group>
+
+     <field_group id="PISCES_scalar"  grid_ref="grid_T_2D" >
+       <field id="pno3tot"         long_name="global mean nitrate concentration"                  unit="mol/m3"   />
+       <field id="ppo4tot"         long_name="global mean phosphorus concentration"               unit="mol/m3"   />
+       <field id="psiltot"         long_name="global mean silicate concentration"                 unit="mol/m3"   />
+       <field id="palktot"         long_name="global mean alkalinity concentration"               unit="mol/m3"   />
+       <field id="pfertot"         long_name="global mean iron concentration"                     unit="mol/m3"   />
+       <field id="tcflx"           long_name="total Flux of Carbon out of the ocean"              unit="mol/s"   />
+       <field id="tcflxcum"        long_name="cumulative total Flux of Carbon out of the ocean"   unit="mol/s"   />
+       <field id="tcexp"           long_name="total Carbon export at 100m"                        unit="mol/s"   />
+       <field id="tintpp"          long_name="global total integrated primary production"         unit="mol/s"   />
+       <field id="tnfix"           long_name="global total nitrogen fixation"                     unit="mol/s"   />
+       <field id="tdenit"          long_name="Total denitrification"                              unit="mol/s"   />
+     </field_group>
+
+   </field_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_orchidee.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_orchidee.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/field_def_orchidee.xml	(revision 5893)
@@ -0,0 +1,425 @@
+<!-- =========================================================================================================== -->
+<!-- field_def_orchidee.xml : Definition of all existing variables                                               -->
+<!-- This file must only be changed if a call xios_orchidee_send_field is added, changed or removed              -->
+<!-- =========================================================================================================== -->
+
+<field_definition id="orchidee" prec="4" domain_ref="domain_landpoints" operation="average" freq_op="1ts" enabled=".TRUE." default_value="9.96921e+36">
+
+
+  <!-- Definition of all variables in sechiba -->
+  <field_group id="sechiba">
+    <field id="mrsos" name="mrsos" long_name="Moisture in Upper 0.1 m of Soil Column" unit="kg m-2"/>
+    <field id="Areas" name="Areas" long_name="Mesh areas" unit="m2" operation="once"/>
+    <field id="LandPoints" name="LandPoints" long_name="Land Points" unit="1" operation="once"/>
+    <field id="Contfrac" name="Contfrac" long_name="Continental fraction" unit="1" operation="once"/>
+    <field id="mrro" name="mrro" long_name="Total Runoff" unit="kg m-2 s-1"/>
+    <field id="ptn" name="ptn" long_name="Deep ground temperature" unit="K" axis_ref="ngrnd"/>
+    <field id="npp" name="npp" long_name="Net Primary Production" unit="gC/m^2/s" axis_ref="nvm"/>
+    <field id="q_cdrag" name="cdrag" long_name="Drag coefficient for LE and SH" unit="?"/>
+    <field id="soilalb_vis" name="soilalb_vis" long_name="Soil Albedo visible" unit="1"/>
+    <field id="soilalb_nir" name="soilalb_nir" long_name="Soil Albedo near infrared" unit="1"/>
+    <field id="vegalb_vis" name="vegalb_vis" long_name="Vegetation Albedo visible" unit="1"/>
+    <field id="vegalb_nir" name="vegalb_nir" long_name="Vegetation Albedo near infrared" unit="1"/>
+    <field id="z0m" name="z0m" long_name="Surface roughness for momentum" unit="m"/>
+    <field id="z0h" name="z0h" long_name="Surface roughness for heat" unit="m"/>
+    <field id="albedo_vis" name="alb_vis" long_name="Albedo visible" unit="1"/>
+    <field id="albedo_nir" name="alb_nir" long_name="Albedo near infrared" unit="1"/>
+    <field id="albedo_glob" name="albedo_glob" long_name="Mean albedo" unit="1"> (albedo_vis + albedo_nir)*0.5 </field>
+    <field id="evap" name="evap" long_name="Evaporation" unit="mm/d"/>
+    <field id="coastalflow" name="coastalflow" long_name="Diffuse coastal flow" unit="m^3/s"/>
+    <field id="riverflow" name="riverflow" long_name="River flow to the oceans" unit="m^3/s"/>
+    <field id="tsol_rad" name="tsol_rad" long_name="Radiative surface temperature" unit="C"/>
+    <field id="vevapnu" name="vevapnu" long_name="Bare soil evaporation" unit="mm/d"/>
+
+    <field id="temp_sol_C" name="temp_sol" long_name="New Surface Temperature" unit="C"/>
+    <field id="temp_sol_K" name="AvgSurfT" long_name="Average surface temperature" unit="K"/>
+    <field id="tsol_max" name="tsol_max" field_ref="temp_sol_C" long_name="Maximum Surface Temperature" unit="C" operation="maximum"/>
+    <field id="tsol_min" name="tsol_min" field_ref="temp_sol_C" long_name="Minimum Surface Temperature" unit="C" operation="minimum"/>
+    <field id="temp_sol_Cloc" name="temp_sol_Cloc" field_ref="temp_sol_K" long_name="New Surface Temperature" unit="C"> temp_sol_K - 273.15  </field>
+
+    <field id="qsurf" name="qsurf" long_name="Near surface specific humidity" unit="g/g"/>
+    <field id="fluxsens" name="fluxsens" long_name="Sensible Heat Flux" unit="W/m^2"/>
+    <field id="fluxlat" name="fluxlat" long_name="Latent Heat Flux" unit="W/m^2"/>
+    <field id="emis" name="emis" long_name="Surface emissivity" unit="1"/>
+    <field id="rain" name="rain" long_name="Rainfall" unit="mm/d"/>
+    <field id="snowf" name="snowf" long_name="Snowfall" unit="mm/d"/>
+    <field id="netrad" name="netrad" long_name="Net radiation" unit="W/m^2"/>
+    <field id="lai" name="lai" long_name="Leaf Area Index" unit="1" axis_ref="nvm"/>
+    <field id="reinf_slope" name="reinf_slope" long_name="Slope index for each grid box" unit="1" operation="once"/>
+    <field id="soilindex" name="soilindex" long_name="Soil index" unit="1" operation="once"/>
+    <field id="basinmap" name="basinmap" long_name="Aproximate map of the river basins" operation="once"/>
+    <field id="nbrivers" name="nbrivers" long_name="Number or rivers in the outflow grid box" operation="once"/>
+    <field id="subli" name="subli" long_name="Sublimation" unit="mm/d"/>
+    <field id="runoff" name="runoff" long_name="Surface runoff" unit="mm/d"/>
+    <field id="drainage" name="drainage" long_name="Deep drainage" unit="mm/d"/>
+    <field id="riversret" name="riversret" long_name="Return from endorheic riversD" unit="mm/d"/>
+    <field id="hydrographs" name="hydrographs" long_name="Hydrographs of gridbox outflow" unit="m^3/s"/>
+    <field id="evapnu_soil" name="evapnu_soil" long_name="Bare soil evap for soil type" unit="mm/d" axis_ref="nstm"/>
+    <field id="drainage_soil" name="drainage_soil" long_name="Drainage for soil type" unit="mm/d" axis_ref="nstm"/>
+    <field id="transpir_soil" name="transpir_soil" long_name="Transpir for soil type" unit="mm/d" axis_ref="nstm"/>
+    <field id="runoff_soil" name="runoff_soil" long_name="Runoff for soil type" unit="mm/d" axis_ref="nstm"/>
+    <field id="tair" name="tair" long_name="Air Temperature" unit="K"/>
+    <field id="qair" name="qair" long_name="Air Humidity" unit="g/g"/>
+    <field id="q2m" name="q2m" long_name="2m Air Humidity" unit="g/g"/>
+    <field id="t2m" name="t2m" long_name="2m Air temperature" unit="K"/>
+    <field id="roughheight" name="roughheight" long_name="Effective roughness height" unit="m"/>
+    <field id="transpir" name="transpir" long_name="Transpiration" unit="mm/d" axis_ref="nvm"/>
+    <field id="inter" name="inter" long_name="Interception loss" unit="mm/d" axis_ref="nvm"/>
+    <field id="evapnu" name="evapnu" long_name="Bare soil evaporation" unit="mm/d"/>
+    <field id="snow" name="snow" long_name="Snow mass" unit="kg/m^2"/>
+    <field id="snowmelt" name="snowmelt" long_name="Snow melt" unit="kg/m^2"/>
+    <field id="tot_melt" name="tot_melt" long_name="Total melt from ice and snow" unit="kg/m^2"/>
+    <field id="snowmelt_from_maxmass" name="snowmelt_from_maxmass" long_name="Snow melt above threshold" unit="kg/m^2"/>
+    <field id="soilcap" name="soilcap" long_name="Surface heat capacity considering snow and soil surface" unit="J/m^2/K"/>
+    <field id="snowage" name="snowage" long_name="Snow age" unit="?"/>
+    <field id="snownobio" name="snownobio" long_name="Snow on other surfaces" unit="kg/m^2" axis_ref="nnobio"/>
+    <field id="snownobioage" name="snownobioage" long_name="Snow age on other surfaces" unit="d" axis_ref="nnobio"/>
+    <field id="vegetfrac" name="vegetfrac" long_name="Fraction of vegetation" unit="1" axis_ref="nvm"/>
+    <field id="maxvegetfrac" name="maxvegetfrac" long_name="Maximum fraction of vegetation" unit="1" axis_ref="nvm"/>
+    <field id="tot_bare_soil" name="tot_bare_soil" long_name="Total Bare Soil Fraction" unit="%"/>
+    <field id="nobiofrac" name="nobiofrac" long_name="Fraction of other surface types" unit="1" axis_ref="nnobio"/>
+    <field id="flood_frac" name="flood_frac" long_name="Flooded fraction" unit="1"/>
+    <field id="reinfiltration" name="reinfiltration" long_name="Reinfiltration from floodplains" unit="mm/d"/>
+    <field id="frac_bare" name="frac_bare" long_name="Bare soil fraction for each tile" unit="-" axis_ref="nvm"/>
+    <field id="soiltile" name="soiltile" long_name="Fraction of soil tiles" unit="%" axis_ref="nstm" operation="once"/>
+    <field id="dss" name="dss" long_name="Up-reservoir Height" unit="m" axis_ref="nvm"/>
+    <field id="gqsb" name="gqsb" long_name="Upper Soil Moisture" unit="Kg/m^2"/>
+    <field id="bqsb" name="bqsb" long_name="Lower Soil Moisture" unit="Kg/m^2"/>
+    <field id="humtot" name="humtot" long_name="Total soil Moisture" unit="Kg/m^2"/>
+    <field id="humtot_soil" name="humtot_soil" long_name="Soil Moisture for soil type" unit="Kg/m^2" axis_ref="nstm"/>
+    <field id="SWI" name="SWI" long_name="Soil wetness index" unit="-"/>
+    <field id="njsc" name="njsc" long_name="Soil class used for hydrology" unit="-" operation="once"/>
+    <field id="qsintveg" name="qsintveg" long_name="Water on canopy" unit="Kg/m^2" axis_ref="nvm"/>
+    <field id="rstruct" name="rstruct" long_name="Structural resistance" unit="s/m" axis_ref="nvm"/>
+    <field id="gpp" name="gpp" long_name="Net assimilation of carbon by the vegetation" unit="gC/m^2/s" axis_ref="nvm"/>
+    <field id="nee" name="nee" long_name="Net Ecosystem Exchange" unit="gC/m^2/s" axis_ref="nvm"/>
+    <field id="maint_resp" name="maint_resp" long_name="Maintenance respiration" unit="gC/m^2/s" axis_ref="nvm"/>
+    <field id="hetero_resp" name="hetero_resp" long_name="Heterotrophic respiration" unit="gC/m^2/s" axis_ref="nvm"/>
+    <field id="growth_resp" name="growth_resp" long_name="Growth respiration" unit="gC/m^2/s" axis_ref="nvm"/>
+    <field id="precisol" name="precisol" long_name="Throughfall" unit="mm/d" axis_ref="nvm"/>
+    <field id="drysoil_frac" name="drysoil_frac" long_name="Fraction of visibly dry soil" unit="1"/>
+    <field id="evapot" name="evapot" long_name="Potential evaporation" unit="mm/s"/>
+    <field id="evapot_corr" name="evapot_corr" long_name="Potential evaporation correction" unit="mm/s"/>
+    <field id="swnet" name="swnet" long_name="Net solar radiation" unit="W/m^2"/>
+    <field id="swdown" name="swdown" long_name="Incident solar radiation" unit="W/m^2"/>
+    <field id="lwdown" name="lwdown" long_name="Absorbed downward longwave radiation" unit="W/m^2"/>
+    <field id="lwnet" name="lwnet" long_name="Net surface longwave radiation" unit="W/m^2"/>
+    <field id="fastr" name="fastr" long_name="Fast flow reservoir" unit="kg/m^2"/>
+    <field id="slowr" name="slowr" long_name="Slow flow reservoir" unit="kg/m^2"/>
+    <field id="streamr" name="streamr" long_name="Stream flow reservoir" unit="kg/m^2"/>
+    <field id="lakevol" name="lakevol" long_name="Volume in lake reservoir" unit="kg/m^2"/>
+    <field id="pondr" name="pondr" long_name="Ponds reservoir" unit="kg/m^2"/>
+    <field id="delfastr" name="delfastr" long_name="Accumulated difference for current time step for fast flow reservoir" unit="kg/m^2" operation="accumulate"/>
+    <field id="delfastr_daily" field_ref="delfastr" name="delfastr_daily" long_name="Mean over difference in fast flow reservoir accumulated over each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @delfastr </field>
+    <field id="delslowr" name="delslowr" long_name="Accumulated difference for current time step for slow flow reservoir" unit="kg/m^2" operation="accumulate" />
+    <field id="delslowr_daily" field_ref="delslowr" name="delslowr_daily" long_name="Mean over difference for slow flow reservoir accumulated over each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @delslowr </field>
+    <field id="delstreamr" name="delstreamr" long_name="Accumulated difference for current time step for stream flow reservoir" unit="kg/m^2" operation="accumulate" />
+    <field id="delstreamr_daily" field_ref="delstreamr" name="delstreamr_daily" long_name="Mean over difference in stream flow reservoir accumulated each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @delstreamr </field>
+    <field id="dellakevol" name="dellakevol" long_name="Accumulated difference for current time step for volume in lake reservoir" unit="kg/m^2" operation="accumulate"/>
+    <field id="dellakevol_daily" field_ref="dellakevol" name="dellakevol_daily" long_name="Mean over difference for volume in lake reservoir accumulated each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @dellakevol </field>
+
+    <field id="delpondr" name="delpondr" long_name="Accumulated difference for current time step for ponds reservoir" unit="kg/m^2" operation="accumulate"/>
+    <field id="delpondr_daily" field_ref="delpondr"  name="delpondr_daily" long_name="Mean over difference for ponds reservoir accumulated over each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @delpondr </field>
+    <field id="delfloodr" name="delfloodr" long_name="Accumulated difference for current time step for floodplains reservoir" unit="kg/m^2" operation="accumulate" />
+    <field id="delfloodr_daily" field_ref="delfloodr" name="delfloodr_daily" long_name="Mean over difference for floodplains reservoir accumulated over each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @delfloodr </field>
+   <field id="swampmap" name="swampmap" long_name="Map of swamps" unit="m^2" operation="once"/>
+    <field id="irrigation" name="irrigation" long_name="Net irrigation" unit="mm/d"/>
+    <field id="netirrig" name="netirrig" long_name="Net irrigation requirement" unit="mm/d"/>
+    <field id="irrigmap" name="irrigmap" long_name="Map of irrigated surfaces" unit="m^2" operation="once"/>
+    <field id="floodmap" name="floodmap" long_name="Map of floodplains" unit="m^2" operation="once"/>
+    <field id="floodh" name="floodh" long_name="Floodplains height" unit="mm"/>
+    <field id="floodr" name="floodr" long_name="Floodplains reservoir" unit="kg/m^2"/>
+    <field id="floodout" name="floodout" long_name="Flow out of floodplains" unit="mm/d"/>
+    <field id="TotWater" name="TotWater" long_name="Total amount of water at end of time step" unit="mm/d"/>
+    <field id="TotWaterFlux" name="TotWater" long_name="Total water flux" unit="mm/d"/>
+    <field id="evapflo" name="evapflo" long_name="Floodplains evaporation" unit="mm/d"/>
+    <field id="k_litt" name="k_litt" long_name="Litter cond" unit="mm/d"/>
+    <field id="beta" name="beta" long_name="Beta Function" unit="1"/>
+    <field id="raero" name="raero" long_name="Aerodynamic resistance" unit="s/m"/>
+    <field id="wind" name="Wind" long_name="Wind speed" unit="m/s"/>
+    <field id="qsatt" name="qsatt" long_name="Surface saturated humidity" unit="g/g"/>
+    <field id="vbeta1" name="vbeta1" long_name="Beta for sublimation" unit="1"/>
+    <field id="vbeta4" name="vbeta4" long_name="Beta for bare soil" unit="1"/>
+    <field id="vbeta5" name="vbeta5" long_name="Beta for floodplains" unit="1"/>
+    <field id="gsmean" name="gsmean" long_name="beta for CO2" unit="mm/d" axis_ref="nvm"/>
+    <field id="humrel" name="humrel" long_name="Soil moisture stress" unit="-" axis_ref="nvm"/>
+    <field id="cimean" name="cimean" long_name="Stomatal CO2 concentation" unit="mmole/m2/s" axis_ref="nvm" enabled=".FALSE."/>
+    <field id="vbeta3" name="vbeta3" long_name="Beta for Transpiration" unit="mm/d" axis_ref="nvm"/>
+    <field id="rveget" name="rveget" long_name="Canopy resistance" unit="s/m" axis_ref="nvm"/>
+    <field id="rsol" name="rsol" long_name="Soil resistance" unit="s/m"/>
+    <field id="vbeta2" name="vbeta2" long_name="Beta for Interception loss" unit="mm/d" axis_ref="nvm"/>
+    <field id="qsintmax" name="qsintmax" long_name="Maximum Interception capacity" unit="Kg/m^2" axis_ref="nvm"/>
+    <field id="mrso" name="mrso" long_name="Total Soil Moisture Content" unit="kg m-2"/>
+    <field id="mrros" name="mrros" long_name="Surface Runoff" unit="kg m-2 s-1"/>
+    <field id="prveg" name="prveg" long_name="Precipitation onto Canopy" unit="kg m-2 s-1"/>
+    <field id="evspsblveg" name="evspsblveg" long_name="Evaporation from Canopy" unit="kg m-2 s-1"/>
+    <field id="evspsblsoi" name="evspsblsoi" long_name="Water Evaporation from Soil" unit="kg m-2 s-1"/>
+    <field id="tran" name="tran" long_name="Transpiration" unit="kg m-2 s-1"/>
+    <field id="treeFrac" name="treeFrac" long_name="Tree Cover Fraction" unit="%"/>
+    <field id="grassFrac" name="grassFrac" long_name="Natural Grass Fraction" unit="%"/>
+    <field id="cropFrac" name="cropFrac" long_name="Crop Fraction" unit="%"/>
+    <field id="baresoilFrac" name="baresoilFrac" long_name="Bare Soil Fraction" unit="%"/>
+    <field id="residualFrac" name="residualFrac" long_name="Fraction of Grid Cell that is Land but Neither Vegetation-Covered nor Bare Soil" unit="%"/>
+    <field id="PAR" name="PAR" long_name="Photosynthetic active radiation, half of swdown" unit="umol phot/m^2/s"/>
+    <field id="PARsun" name="PARsun" long_name="PAR received by sun leaves" unit="umol phot/m^2/s" axis_ref="nvm"/>
+    <field id="PARsh" name="PARsh" long_name="PAR received by shaded leaves" unit="umol phot/m^2/s" axis_ref="nvm"/>
+    <field id="laisun" name="laisun" long_name="Sunlit Leaf Area Index" unit="1" axis_ref="nvm"/>
+    <field id="laish" name="laish" long_name="Shaded Leaf Area Index" unit="1" axis_ref="nvm"/>
+    <field id="PARsuntab" name="PARsuntab" long_name="PAR received by sun leaves over LAI layers" unit="umol phot/m^2/s" axis_ref="nlaip1"/>
+    <field id="PARshtab" name="PARshtab" long_name="PAR received by shaded leaves over LAI layers" unit="umol phot/m^2/s" axis_ref="nlaip1"/>
+    <field id="coszang" name="coszang" long_name="Cosine of the solar zenith angle" unit="1"/>
+    <field id="PARdf" name="PARdf" long_name="Diffuse photosynthetic active radiation" unit="umol phot/m^2/s"/>
+    <field id="PARdr" name="PARdr" long_name="Direct photosynthetic active radiation" unit="umol phot/m^2/s"/>
+    <field id="CRF" name="CRF" long_name="Canopy reduction factor for net NO flux calculation" unit="1" axis_ref="nvm" />
+    <field id="flx_co2_bbg_year" name="flx_co2_bbg_year" long_name="CO2 emissions from biomass burning - Read in an input file" unit="kgC/m^2/yr" operation="once"/>
+    <field id="N_qt_WRICE_year" name="N_qt_WRICE_year" long_name="N fertilizers applied on wetland rice - Read in an input file" unit="kgN/yr" operation="once"/>
+    <field id="N_qt_OTHER_year" name="N_qt_OTHER_year" long_name="N fertilizers applied on other crops and grasses - Read in an input file" unit="kgN/yr" operation="once"/>
+    <field id="flx_iso" name="flx_iso" long_name="Isoprene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_mono" name="flx_mono" long_name="Monoterpene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_ORVOC" name="flx_ORVOC" long_name="Other Volatile Organic Compound emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_MBO" name="flx_MBO" long_name="2-methyl-3-buten-2-ol emissions from vegetation (mainly pines in America)" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_methanol" name="flx_methanol" long_name="Methanol emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_acetone" name="flx_acetone" long_name="Acetone emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_acetal" name="flx_acetal" long_name="Acetaldehyde emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_formal" name="flx_formal" long_name="Formaldehyde emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_acetic" name="flx_acetic" long_name="Acetic acid emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_formic" name="flx_formic" long_name="Formic acid emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm"/>
+    <field id="flx_apinen" name="flx_apinen" long_name="Alpha pinene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_bpinen" name="flx_bpinen" long_name="Beta pinene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_limonen" name="flx_limonen" long_name="Limonene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_myrcen" name="flx_myrcen" long_name="Myrcene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_sabinen" name="flx_sabinen" long_name="Sabinene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_camphen" name="flx_camphen" long_name="Camphene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_3caren" name="flx_3caren" long_name="3-Carene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_tbocimen" name="flx_tbocimen" long_name="T-beta Ocimene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_othermono" name="flx_othermono" long_name="Emissions of other monoterpenes from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_sesquiter" name="flx_sesquiter" long_name="Sesquiterpene emissions from vegetation" unit="kgC/m^2/s" axis_ref="nvm" />
+    <field id="flx_fertil_no" name="flx_fertil_no" long_name="Biogenic nitrogen oxide soil emission due to N-fertilisation" unit="ngN/m^2/s" axis_ref="nvm"/>
+    <field id="flx_no_soil" name="flx_no_soil" long_name="Nitrogen Oxide emissions from soil, before deposition on canopy" unit="ngN/m^2/s" axis_ref="nvm"/>
+    <field id="flx_no" name="flx_no" long_name="Net nitrogen Oxide emissions from soil, after deposition on canopy" unit="ngN/m^2/s" axis_ref="nvm"/>
+    <field id="fco2" name="fco2" long_name="Function for CO2 impact on BVOC (isoprene)" unit="1" axis_ref="nvm" />
+    <field id="cim" name="cim" long_name="Intercellular CO2 over nlai" unit="ppm" axis_ref="nvm" />
+    <field id="Psurf" name="Psurf" long_name="Surface pressure" unit="Pa"/>
+    <field id="Qb" name="Qb" long_name="Slowflow hydrographs of gridbox outflow" unit="m^3/s"/> 
+    <field id="CanopInt" name="CanopInt" long_name="Water on canopy" unit="Kg/m^2"/>  
+    <field id="LAImean" name="LAImean" long_name="Mean Leaf Area Index" unit="-"/>
+    <field id="SoilSat" name="SoilSat" long_name="Mean volumetric water content at saturation" unit="m^3/m^3" axis_ref="nslm" operation="once"/>   
+    <field id="RootDist" name="RootDist" long_name="Cumulative root density" unit="-"  axis_ref="nslm" operation="once"/>   
+    <field id="SoilThick" name="SoilThick" long_name="Hydrological soil layer thickness" unit="m"  axis_ref="nslm" operation="once"/>   
+    <field id="water2infilt" name="water2infilt" long_name="Variable water2infilt in hydrol" unit="Kg/m^2" axis_ref="nstm"/>  
+    <field id="pkappa" name="pkappa" long_name="Soil thermal conductivity" unit="W/m/K" axis_ref="ngrnd"/>  
+    <field id="pkappa_snow" name="pkappa_snow" long_name="Snow thermal conductivity" unit="W/m/K" axis_ref="nsnow"/>  
+    <field id="pcapa" name="pcapa" long_name="Soil heat capacity" unit="J/m^3/K" axis_ref="ngrnd"/>  
+    <field id="pcapa_snow" name="pcapa_snow" long_name="Snow heat capacity" unit="J/m^3/K" axis_ref="nsnow"/>  
+    <field id="snowtemp" name="snowtemp" long_name="snow temperature" unit="K" axis_ref="nsnow" enabled=".false." />  
+    <field id="snowliq" name="snowliq" long_name="Snow liquid content" unit="m" axis_ref="nsnow"/>  
+    <field id="snowdz" name="snowdz" long_name="Snow layer thickness" unit="m" axis_ref="nsnow"/>  
+    <field id="snowrho" name="snowrho" long_name="Snow denisty" unit="Kg/m^3" axis_ref="nsnow"/>  
+    <field id="snowheat" name="snowheat" long_name="Snow heat content" unit="J/m^2" axis_ref="nsnow"/>  
+    <field id="snowgrain" name="snowgrain" long_name="Snow grain size" unit="m" axis_ref="nsnow"/>  
+
+    <!-- ALMA -->
+    <field id="twbr" name="TWBR" long_name="Total water budget residu" unit="Kg/m^2/s"/>
+    <field id="soilflx" name="Qg" long_name="Ground heat flux" unit="W/m^2"/>
+    <field id="Qf" name="Qf" long_name="Energy of fusion" unit="W/m^2"/>
+    <field id="Qv" name="Qv" long_name="Energy of sublimation" unit="W/m^2"/>
+    <field id="surfheat_incr" name="DelSurfHeat" long_name="Accumulated change in surface layer heat" unit="J/m^2" operation="accumulate"/>
+    <field id="coldcont_incr" name="DelColdCont" long_name="Accumulated change in snow surface layer cold content" unit="J/m^2" operation="accumulate"/>
+    <field id="snowf_alma" name="Snowf" long_name="Snowfall rate" unit="kg/m^2/s"/>
+    <field id="rain_alma" name="Rainf" long_name="Rainfall rate" unit="kg/m^2/s"/>
+    <field id="evap_alma" name="evap_alma" long_name="Total Evapotranspiration" unit="kg/m^2/s"/>
+    <field id="Qs" name="Qs" long_name="Surface runoff" unit="kg/m^2/s"/>
+    <field id="Qsb" name="Qsb" long_name="Sub-surface runoff" unit="kg/m^2/s"/>
+    <field id="Qsm" name="Qsm" long_name="Snowmelt" unit="kg/m^2/s"/>
+    <field id="dr_corrnum" name="Qsb_corrnum" long_name="Adjustement flux added to drainage (numerical errors in tridiag)" unit="kg/m^2/s"/>
+    <field id="DelSoilMoist" name="DelSoilMoist" long_name="Accumulated change in soil moisture" unit="kg/m^2" operation="accumulate"/>
+    <field id="DelSoilMoist_daily" field_ref="DelSoilMoist"  name="DelSoilMoist_daily" long_name="Mean for change in soil moisture acumulated over each day." unit="kg/m^2/d" freq_op="1d" operation="average" > @DelSoilMoist </field>
+
+    <field id="DelSurfStor" name="DelSurfStor" long_name="Accumulated change in Surface Water Storage" unit="kg/m^2" operation="accumulate"/>
+    <field id="DelIntercept" name="DelIntercept" long_name="Accumulated hange in interception storage" unit="kg/m^2" operation="accumulate"/>
+    <field id="DelIntercept_daily" field_ref="DelIntercept" name="DelIntercept_daily" long_name="Mean for change in interception storage accumulated over each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @DelIntercept </field>
+
+    <field id="DelSWE" name="DelSWE" long_name="Accumulated change in Snow Water Equivalent" unit="kg/m^2" operation="accumulate"/>
+    <field id="DelSWE_daily" field_ref="DelSWE" name="DelSWE_daily" long_name="Mean for change in Snow Water Equivalent accumulated over each day" unit="kg/m^2/d" freq_op="1d" operation="average" > @DelSWE </field>
+    <field id="irrigation_alma" name="Qirrig" long_name="Irrigation" unit="kg/m^2/s"/>
+    <field id="netirrig_alma" name="Qirrig_req" long_name="Irrigation requirement" unit="kg/m^2/s"/>
+    <field id="PotSurfT" name="PotSurfT" long_name="Potential (Unstressed) surface temperature" unit="K"/>
+    <field id="SurfStor" name="SurfStor" long_name="Surface Water Storage" unit="kg/m^2"/>
+    <field id="SoilMoist" name="SoilMoist" long_name="3D average layer soil moisture" unit="kg/m^2" axis_ref="nslm"/>
+    <field id="RootMoist" name="RootMoist" long_name="Root zone soil water" unit="kg/m^2"/>
+    <field id="SoilWet" name="SoilWet" long_name="Total soil wetness" unit="-"/>
+    <field id="ECanop" name="ECanop" long_name="Interception evaporation" unit="kg/m^2/s"/>
+    <field id="TVeg" name="TVeg" long_name="Transpiration" unit="kg/m^2/s"/>
+    <field id="vevapnu_alma" name="ESoil" long_name="Bare soil evaporation" unit="kg/m^2/s"/>
+    <field id="evapflo_alma" name="EWater" long_name="Floodplains evaporation" unit="kg/m^2/s"/>
+    <field id="SubSnow" name="SubSnow" long_name="Snow sublimation" unit="kg/m^2/s"/>
+    <field id="ACond" name="ACond" long_name="Aerodynamic conductance" unit="m/s"/>
+    <field id="albedo_snow" name="SAlbedo" long_name="Snow albedo" unit="1"/>
+    <field id="SnowDepth" name="SnowDepth" long_name="3D snow depth" unit="m"/>
+    <field id="moistc_1" name="moistc_1" long_name="Soil Moisture profile for soil type 1" unit="m3/m3" axis_ref="nslm"/>
+    <field id="moistc_2" name="moistc_2" long_name="Soil Moisture profile for soil type 2" unit="m3/m3" axis_ref="nslm"/>
+    <field id="moistc_3" name="moistc_3" long_name="Soil Moisture profile for soil type 3" unit="m3/m3" axis_ref="nslm"/>
+    <field id="kfactroot_1" name="kfactroot_1" long_name="Root fraction profile for soil type 1" unit="%" axis_ref="nslm"/>
+    <field id="kfactroot_2" name="kfactroot_2" long_name="Root fraction profile for soil type 2" unit="%" axis_ref="nslm"/>
+    <field id="kfactroot_3" name="kfactroot_3" long_name="Root fraction profile for soil type 3" unit="%" axis_ref="nslm"/>
+    <field id="vegetsoil_1" name="vegetsoil_1" long_name="Fraction of vegetation on soil type 1" unit="%" axis_ref="nvm"/>
+    <field id="vegetsoil_2" name="vegetsoil_2" long_name="Fraction of vegetation on soil type 2" unit="%" axis_ref="nvm"/>
+    <field id="vegetsoil_3" name="vegetsoil_3" long_name="Fraction of vegetation on soil type 3" unit="%" axis_ref="nvm"/>
+    <field id="temp_hydro" name="temp_hydro" long_name="Temperature profile on hydrological levels" unit="K" axis_ref="nslm"/>
+    <field id="kk_moy" name="kk_moy" long_name="Mean hydraulic conductivity over soiltiles" unit="mm/d" axis_ref="nslm"/>
+    <field id="profil_froz_hydro" name="profil_froz_hydro" long_name="Frozen fraction for each hydrological soil layer average over soil types" unit="1" axis_ref="nslm"/>
+    <field id="profil_froz_hydro_1" name="profil_froz_hydro_1" long_name="Frozen fraction for each hydrological soil layer on soil type 1" unit="1" axis_ref="nslm"/>
+    <field id="profil_froz_hydro_2" name="profil_froz_hydro_2" long_name="Frozen fraction for each hydrological soil layer on soil type 2" unit="1" axis_ref="nslm"/>
+    <field id="profil_froz_hydro_3" name="profil_froz_hydro_3" long_name="Frozen fraction for each hydrological soil layer on soil type 3" unit="1" axis_ref="nslm"/>
+    
+  </field_group>
+
+
+  <!-- Definition of all variables in stomate -->
+  <field_group id="stomate">
+    <field id="T2M_MONTH" name="T2M_MONTH" long_name="Monthly 2 m temperature" unit="K"/>
+    <field id="T2M_WEEK" name="T2M_WEEK" long_name="Weekly 2 m temperature" unit="K"/>
+    <field id="TSEASON" name="TSEASON" long_name="Seasonal 2 m temperature" unit="K"/>
+    <field id="TMIN_SPRING_TIME" name="TMIN_SPRING_TIME" long_name="Number of days after onset" unit="-" axis_ref="nvm"/>
+    <field id="ONSET_DATE" name="ONSET_DATE" long_name="The day in the year when leaves start to grow" unit="days" axis_ref="nvm"/>
+    <field id="FPC_MAX" name="FPC_MAX" long_name="Foliage projective cover" unit="-" axis_ref="nvm"/>
+    <field id="MAXFPC_LASTYEAR" name="MAXFPC_LASTYEAR" long_name="Foliage projective cover of last year" unit="-" axis_ref="nvm"/>
+    <field id="HET_RESP" name="HET_RESP" long_name="heterotr. resp. from ground" unit="gC/m^2 tot/pft/day" axis_ref="nvm"/>
+    <field id="FIREFRAC" name="FIREFRAC" long_name="Fire fraction on ground " unit="1/day" axis_ref="nvm"/>
+    <field id="CO2FLUX" name="CO2FLUX" long_name="CO2 flux " unit="gC/m^2/pft/mth" axis_ref="nvm"/>
+    <field id="CO2_FIRE" name="CO2_FIRE" long_name="Output CO2 flux from fire " unit="gC/day/m^2/pft" axis_ref="nvm"/>
+    <field id="CO2_TAKEN" name="CO2_TAKEN" long_name="CO2 taken from atmosphere for initiate growth " unit="gC/day/m^2/pft" axis_ref="nvm"/>
+    <field id="LAI" name="LAI" long_name="Leaf Area Index " unit="-" axis_ref="nvm"/>
+    <field id="VEGET_MAX" name="VEGET_MAX" long_name="Maximum vegetation fraction (LAI -&gt; infinity) " unit="-" axis_ref="nvm"/>
+    <field id="NPP_STOMATE" name="NPP" long_name="Net primary productivity " unit="gC/day/(m^2 tot)" axis_ref="nvm"/>
+    <field id="GPP" name="GPP" long_name="Gross primary productivity " unit="gC/day/m^2" axis_ref="nvm"/>
+    <field id="LEAF_M" name="LEAF_M" long_name="Leaf mass" unit="gC/m^2 " axis_ref="nvm"/>
+    <field id="SAP_M_AB" name="SAP_M_AB" long_name="Sap mass above ground" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="SAP_M_BE" name="SAP_M_BE" long_name="Sap mass below ground" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="HEART_M_AB" name="HEART_M_AB" long_name="Heartwood mass above ground" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="HEART_M_BE" name="HEART_M_BE" long_name="Heartwood mass below ground" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="ROOT_M" name="ROOT_M" long_name="Root mass" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="FRUIT_M" name="FRUIT_M" long_name="Fruit mass" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="RESERVE_M" name="RESERVE_M" long_name="Carbohydrate reserve mass" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="MAINT_RESP" name="MAINT_RESP" long_name="Maintenance respiration" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="GROWTH_RESP" name="GROWTH_RESP" long_name="Growth respiration" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="IND" name="IND" long_name="Density of individuals" unit="1/ m^2" axis_ref="nvm"/>
+    <field id="ADAPTATION" name="ADAPTATION" long_name="Adaptation to climate (DGVM)" unit="-" axis_ref="nvm"/>
+    <field id="REGENERATION" name="REGENERATION" long_name="Probability from regenerative (DGVM)" unit="-" axis_ref="nvm"/>
+    <field id="CN_IND" name="CN_IND" long_name="crown area of individuals" unit="m^2" axis_ref="nvm"/>
+    <field id="WOODMASS_IND" name="WOODMASS_IND" long_name="Woodmass of individuals" unit="gC/pft" axis_ref="nvm"/>
+    <field id="TOTAL_M" name="TOTAL_M" long_name="Total living biomass" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="MOISTRESS" name="MOISTRESS" long_name="weekly moisture stress" unit="-" axis_ref="nvm"/>
+    <field id="TOTAL_TURN" name="TOTAL_TURN" long_name="total turnover rate" unit="gC/m^2/day " axis_ref="nvm"/>
+    <field id="LEAF_TURN" name="LEAF_TURN" long_name="Leaf turnover" unit="gC/m^2/day " axis_ref="nvm"/>
+    <field id="SAP_AB_TURN" name="SAP_AB_TURN" long_name="Sap turnover above" unit="gC/m^2/day " axis_ref="nvm"/>
+    <field id="ROOT_TURN" name="ROOT_TURN" long_name="Root turnover" unit="gC/m^2/day " axis_ref="nvm"/>
+    <field id="FRUIT_TURN" name="FRUIT_TURN" long_name="Fruit turnover" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="TOTAL_BM_LITTER" name="TOTAL_BM_LITTER" long_name="total conversion of biomass to litter" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="LEAF_BM_LITTER" name="LEAF_BM_LITTER" long_name="Leaf death" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="SAP_AB_BM_LITTER" name="SAP_AB_BM_LITTER" long_name="Sap death above ground" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="SAP_BE_BM_LITTER" name="SAP_BE_BM_LITTER" long_name="Sap death below ground" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="HEART_AB_BM_LITTER" name="HEART_AB_BM_LITTER" long_name="Heartwood death above ground" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="HEART_BE_BM_LITTER" name="HEART_BE_BM_LITTER" long_name="Heartwood death below ground" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="ROOT_BM_LITTER" name="ROOT_BM_LITTER" long_name="Root death" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="FRUIT_BM_LITTER" name="FRUIT_BM_LITTER" long_name="Fruit death" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="RESERVE_BM_LITTER" name="RESERVE_BM_LITTER" long_name="Carbohydrate reserve death" unit="gC/m^2/day" axis_ref="nvm"/>
+    <field id="LITTER_STR_AB" name="LITTER_STR_AB" long_name="structural litter above ground" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="LITTER_MET_AB" name="LITTER_MET_AB" long_name="metabolic litter above ground" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="LITTER_STR_BE" name="LITTER_STR_BE" long_name="structural litter below ground" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="LITTER_MET_BE" name="LITTER_MET_BE" long_name="metabolic litter below ground" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="DEADLEAF_COVER" name="DEADLEAF_COVER" long_name="fraction of soil covered by dead leaves" unit="-"/>
+    <field id="TOTAL_SOIL_CARB" name="TOTAL_SOIL_CARB" long_name="total soil and litter carbon" unit="gC/m^2" axis_ref="nvm"/>
+    <field id="CARBON_ACTIVE" name="CARBON_ACTIVE" long_name="active soil carbon in ground " unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="CARBON_SLOW" name="CARBON_SLOW" long_name="slow soil carbon in ground" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="CARBON_PASSIVE" name="CARBON_PASSIVE" long_name="passive soil carbon in ground" unit="gC/m^2/pft" axis_ref="nvm"/>
+    <field id="LITTERHUM" name="LITTERHUM" long_name="Litter humidity" unit="-"/>
+    <field id="BM_ALLOC_LEAF" name="BM_ALLOC_LEAF" long_name="biomass allocated to leaves" unit="gC/m**2/pft/dt" axis_ref="nvm"/>
+    <field id="BM_ALLOC_SAP_AB" name="BM_ALLOC_SAP_AB" long_name="biomass allocated to sapwood above ground" unit="gC/m**2/pft/dt" axis_ref="nvm"/>
+    <field id="BM_ALLOC_SAP_BE" name="BM_ALLOC_SAP_BE" long_name="biomass allocated to sapwood below ground" unit="gC/m**2/pft/dt" axis_ref="nvm"/>
+    <field id="BM_ALLOC_ROOT" name="BM_ALLOC_ROOT" long_name="biomass allocated to roots" unit="gC/m**2/pft/dt" axis_ref="nvm"/>
+    <field id="BM_ALLOC_FRUIT" name="BM_ALLOC_FRUIT" long_name="biomass allocated to fruits" unit="gC/m**2/pft/dt" axis_ref="nvm"/>
+    <field id="BM_ALLOC_RES" name="BM_ALLOC_RES" long_name="biomass allocated to carbohydrate reserve" unit="gC/m**2/pft/dt" axis_ref="nvm"/>
+    <field id="HERBIVORES" name="HERBIVORES" long_name="time constant of herbivore activity" unit="days" axis_ref="nvm"/>
+    <field id="TURNOVER_TIME" name="TURNOVER_TIME" long_name="turnover time for grass leaves" unit="days" axis_ref="nvm"/>
+    <field id="PROD10" name="PROD10" long_name="10 year wood product pool" unit="gC/m**2" axis_ref="P11"/>
+    <field id="FLUX10" name="FLUX10" long_name="annual flux for each 10 year wood product pool" unit="gC/m**2/yr" axis_ref="P10"/>
+    <field id="PROD100" name="PROD100" long_name="100 year wood product pool" unit="gC/m**2" axis_ref="P101"/>
+    <field id="FLUX100" name="FLUX100" long_name="annual flux for each 100 year wood product pool" unit="gC/m**2/yr" axis_ref="P100"/>
+    <field id="CONVFLUX" name="CONVFLUX" long_name="annual release right after deforestation" unit="gC/m**2/day"/>
+    <field id="CFLUX_PROD10" name="CFLUX_PROD10" long_name="annual release from all 10 year wood product pools" unit="gC/m**2/day"/>
+    <field id="CFLUX_PROD100" name="CFLUX_PROD100" long_name="annual release from all 100 year wood product pools" unit="gC/m**2/day"/>
+    <field id="HARVEST_ABOVE" name="HARVEST_ABOVE" long_name="annual release product after harvest" unit="gC/m**2/day"/>
+    <field id="RESOLUTION_X" name="RESOLUTION_X" long_name="E-W resolution" unit="m" operation="once"/>
+    <field id="RESOLUTION_Y" name="RESOLUTION_Y" long_name="N-S resolution" unit="m" operation="once"/>
+    <field id="CONTFRAC_STOMATE" name="CONTFRAC" long_name="Continental fraction" unit="1" operation="once"/>
+    <field id="VCMAX" name="VCMAX" long_name="Maximum rate of carboxylation" unit="-" axis_ref="nvm"/>
+    <field id="LEAF_AGE" name="LEAF_AGE" long_name="leaf age" unit="days" axis_ref="nvm"/>
+    <field id="MORTALITY" name="MORTALITY" long_name="Fraction of trees that dies (gap)" unit="1/day" axis_ref="nvm"/>
+    <field id="FIREDEATH" name="FIREDEATH" long_name="Fraction of plants killed by fire" unit="1/day" axis_ref="nvm"/>
+    <field id="IND_ESTAB" name="IND_ESTAB" long_name="Density of newly established saplings" unit="ind/m**2/day" axis_ref="nvm"/>
+    <field id="ESTABTREE" name="ESTABTREE" long_name="Rate of tree establishement" unit="1"/>
+    <field id="ESTABGRASS" name="ESTABGRASS" long_name="Rate of grass establishement" unit="1"/>
+    <field id="LIGHT_DEATH" name="LIGHT_DEATH" long_name="Fraction of plants that dies (light competition)" unit="1/day" axis_ref="nvm"/>
+    <field id="AGE" name="AGE" long_name="age" unit="years" axis_ref="nvm"/>
+    <field id="HEIGHT" name="HEIGHT" long_name="height" unit="m" axis_ref="nvm"/>
+    <field id="WHEN_GROWTHINIT" name="WHEN_GROWTHINIT" long_name="Time elapsed from season beginning" unit="d" axis_ref="nvm"/>
+    <field id="PFTPRESENT" name="PFTPRESENT" long_name="PFT exists" unit="d" axis_ref="nvm"/>
+    <field id="GDD_MIDWINTER" name="GDD_MIDWINTER" long_name="Growing degree days, since midwinter" unit="degK" axis_ref="nvm"/>
+    <field id="GDD_M5_DORMANCE" name="GDD_M5_DORMANCE" long_name="Growing degree days threshold" unit="degK" axis_ref="nvm"/>
+    <field id="NCD_DORMANCE" name="NCD_DORMANCE" long_name="Number of chilling days, since leaves were lost" unit="d" axis_ref="nvm"/>
+    <field id="ALLOW_INITPHENO" name="ALLOW_INITPHENO" long_name="Allow to declare beginning of the growing season" unit="-" axis_ref="nvm"/>
+    <field id="BEGIN_LEAVES" name="BEGIN_LEAVES" long_name="Signal to start putting leaves on" unit="-" axis_ref="nvm"/>
+    <field id="T2M_LONGTERM" name="T2M_LONGTERM" long_name="Longterm 2 m temperature" unit="K"/>
+    <field id="FIREINDEX" name="FIREINDEX" long_name="Fire index on ground" unit="-" axis_ref="nvm"/>
+    <field id="cVeg" name="cVeg" long_name="Carbon in Vegetation" unit="kg C m-2"/>
+    <field id="cLitter" name="cLitter" long_name="Carbon in Litter Pool" unit="kg C m-2"/>
+    <field id="cSoil" name="cSoil" long_name="Carbon in Soil Pool" unit="kg C m-2"/>
+    <field id="cProduct" name="cProduct" long_name="Carbon in Products of Land Use Change" unit="kg C m-2"/>
+    <field id="cMassVariation" name="cMassVariation" long_name="Terrestrial Carbon Mass Variation" unit="kg C m-2 s-1"/>
+    <field id="lai_ipcc" name="lai" long_name="Leaf Area Fraction" unit="1"/>
+    <field id="gpp_ipcc" name="gpp" long_name="Gross Primary Production" unit="kg C m-2 s-1"/>
+    <field id="ra" name="ra" long_name="Autotrophic Respiration" unit="kg C m-2 s-1"/>
+    <field id="npp_ipcc" name="npp" long_name="Net Primary Production" unit="kg C m-2 s-1"/>
+    <field id="rh" name="rh" long_name="Heterotrophic Respiration" unit="kg C m-2 s-1"/>
+    <field id="fFire" name="fFire" long_name="CO2 Emission from Fire" unit="kg C m-2 s-1"/>
+    <field id="fHarvest" name="fHarvest" long_name="CO2 Flux to Atmosphere from Crop Harvesting" unit="kg C m-2 s-1"/>
+    <field id="fLuc" name="fLuc" long_name="CO2 Flux to Atmosphere from Land Use Change" unit="kg C m-2 s-1"/>
+    <field id="nbp" name="nbp" long_name="Net Biospheric Production" unit="kg C m-2 s-1"/>
+    <field id="fVegLitter" name="fVegLitter" long_name="Total Carbon Flux from Vegetation to Litter" unit="kg C m-2 s-1"/>
+    <field id="fLitterSoil" name="fLitterSoil" long_name="Total Carbon Flux from Litter to Soil" unit="kg C m-2 s-1"/>
+    <field id="cLeaf" name="cLeaf" long_name="Carbon in Leaves" unit="kg C m-2"/>
+    <field id="cWood" name="cWood" long_name="Carbon in Wood" unit="kg C m-2"/>
+    <field id="cRoot" name="cRoot" long_name="Carbon in Roots" unit="kg C m-2"/>
+    <field id="cMisc" name="cMisc" long_name="Carbon in Other Living Compartments" unit="kg C m-2"/>
+    <field id="cLitterAbove" name="cLitterAbove" long_name="Carbon in Above-Ground Litter" unit="kg C m-2"/>
+    <field id="cLitterBelow" name="cLitterBelow" long_name="Carbon in Below-Ground Litter" unit="kg C m-2"/>
+    <field id="cSoilFast" name="cSoilFast" long_name="Carbon in Fast Soil Pool" unit="kg C m-2"/>
+    <field id="cSoilMedium" name="cSoilMedium" long_name="Carbon in Medium Soil Pool" unit="kg C m-2"/>
+    <field id="cSoilSlow" name="cSoilSlow" long_name="Carbon in Slow Soil Pool" unit="kg C m-2"/>
+    <field id="landCoverFrac" name="landCoverFrac" long_name="Fractional Land Cover of PFT" unit="%" axis_ref="nvm"/>
+    <field id="treeFracPrimDec" name="treeFracPrimDec" long_name="Total Primary Deciduous Tree Cover Fraction" unit="%"/>
+    <field id="treeFracPrimEver" name="treeFracPrimEver" long_name="Total Primary Evergreen Tree Cover Fraction" unit="%"/>
+    <field id="c3PftFrac" name="c3PftFrac" long_name="Total C3 PFT Cover Fraction" unit="%"/>
+    <field id="c4PftFrac" name="c4PftFrac" long_name="Total C4 PFT Cover Fraction" unit="%"/>
+    <field id="rGrowth" name="rGrowth" long_name="Growth Autotrophic Respiration" unit="kg C m-2 s-1"/>
+    <field id="rMaint" name="rMaint" long_name="Maintenance Autotrophic Respiration" unit="kg C m-2 s-1"/>
+    <field id="nppLeaf" name="nppLeaf" long_name="CO2 Flux from Atmosphere due to NPP Allocation to Leaf" unit="kg C m-2 s-1"/>
+    <field id="nppWood" name="nppWood" long_name="CO2 Flux from Atmosphere due to NPP Allocation to Wood" unit="kg C m-2 s-1"/>
+    <field id="nppRoot" name="nppRoot" long_name="CO2 Flux from Atmosphere due to NPP Allocation to Root" unit="kg C m-2 s-1"/>
+    <field id="nep" name="nep" long_name="Net Carbon Mass Flux out of Atmophere due to Net Ecosystem Productivity." unit="kg C m-2 s-1"/>
+    <field id="wtd" name="WaterTableD" long_name="Water Table Depth" unit="m"/>
+    <field id="undermcr" name="undermcr" long_name="Number of soiltiles under residual moisture" unit="-"/>
+    <field id="tws" name="TWS" long_name="Total Water Storage" unit="Kg/m^2"> humtot+snow+CanopInt+fastr+slowr+streamr+lakevol+pondr </field>
+    <field id="check_infilt" name="check_infilt" long_name="check water conservation of infilt" unit="mm/s"/>
+    <field id="check_tr" name="check_tr" long_name="check water conservation of tridiag with diag_tr2" unit="mm/s"/>
+    <field id="check_over" name="check_over" long_name="check water conservation of smooth_over_mcs" unit="mm/s"/>
+    <field id="check_under" name="check_under" long_name="check water conservation of smooth_under_mcs" unit="mm/s"/>
+    <field id="ru_corr" name="Qs_corr" long_name="Adjustement flux added to surface runoff" unit="kg/m^2/s"/>
+    <field id="ru_corr2" name="Qs_corr2" long_name="Adjustement flux added to surface runoff (case of negative surface runoff)" unit="kg/m^2/s"/>
+    <field id="dr_corr" name="Qsb_corr" long_name="Adjustement flux added to drainage" unit="kg/m^2/s"/>
+    <field id="dr_force" name="Qforce" long_name="Adjustement flux added to drainage to sustain a forced water table depth" unit="kg/m^2/s"/>
+    <field id="ru_infilt" name="Qs_infilt" long_name="Surface runoff from hydrol_soil_infilt" unit="kg/m^2/s"/>
+    <field id="qinfilt" name="Infilt" long_name="Infiltration flux" unit="kg/m^2/s"/>
+  </field_group>
+</field_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histLES_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histLES_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histLES_lmdz.xml	(revision 5893)
@@ -0,0 +1,531 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histLES" name="XhistLES" output_freq="1h" output_level="5" enabled=".FALSE.">
+            
+            <!-- VARS 1D -->
+<!--            <field_group operation="once">    -->
+<!--              <field field_ref="Ap" level="1" />    -->
+<!--              <field field_ref="Bp" level="1" />    -->
+<!--              <field field_ref="Alt" level="1" />    -->
+<!--            </field_group>    -->
+        
+            <!-- VARS 2D -->
+            <field_group operation="average" freq_op="1ts">
+                <field field_ref="phis" level="1" />
+                <field field_ref="aire" level="1" operation="once" />
+                <field field_ref="contfracATM" level="10" operation="once" />
+                <field field_ref="contfracOR" level="10" />
+                <field field_ref="aireTER" level="10" />
+                <field field_ref="flat" level="5" />
+                <field field_ref="slp" level="10" />
+                <field field_ref="tsol" level="10" />
+                <field field_ref="t2m" level="10" />
+                <field field_ref="t2m_min" level="10" operation="minimum" />
+                <field field_ref="t2m_max" level="10" operation="maximum" />
+                <field field_ref="t2m_ter" level="10" />
+                <field field_ref="t2m_lic" level="10" />
+                <field field_ref="t2m_oce" level="10" />
+                <field field_ref="t2m_sic" level="10" />
+                <field field_ref="gusts" level="10" />
+                <field field_ref="wind10m" level="10" />
+                <field field_ref="wind10max" level="10" operation="maximum" />
+                <field field_ref="sicf" level="10" />
+                <field field_ref="q2m" level="10" />
+                <field field_ref="ustar" level="10" />
+                <field field_ref="u10m" level="10" />
+                <field field_ref="v10m" level="10" />
+                <field field_ref="psol" level="10" />
+                <field field_ref="qsurf" level="10" />
+                <field field_ref="ustar_ter" level="10" />
+                <field field_ref="ustar_lic" level="10" />
+                <field field_ref="ustar_oce" level="10" />
+                <field field_ref="ustar_sic" level="10" />
+                <field field_ref="wstar_ter" level="10" />
+                <field field_ref="wstar_lic" level="10" />
+                <field field_ref="wstar_oce" level="10" />
+                <field field_ref="wstar_sic" level="10" />
+                <field field_ref="wstar" level="10" />
+                <field field_ref="u10m_ter" level="10" />
+                <field field_ref="u10m_lic" level="10" />
+                <field field_ref="u10m_oce" level="10" />
+                <field field_ref="u10m_sic" level="10" />
+                <field field_ref="v10m_ter" level="10" />
+                <field field_ref="v10m_lic" level="10" />
+                <field field_ref="v10m_oce" level="10" />
+                <field field_ref="v10m_sic" level="10" />
+                <field field_ref="qsol" level="10" />
+                <field field_ref="ndayrain" level="10" operation="instant" />
+                <field field_ref="precip" level="5" />
+                <field field_ref="plul" level="10" />
+                <field field_ref="pluc" level="5" />
+                <field field_ref="snow" level="5" />
+                <field field_ref="evap" level="10" />
+                <field field_ref="evap_ter" level="10" />
+                <field field_ref="evap_lic" level="10" />
+                <field field_ref="evap_oce" level="10" />
+                <field field_ref="evap_sic" level="10" />
+                <field field_ref="msnow" level="10" />
+                <field field_ref="fsnow" level="10" />
+                <field field_ref="tops" level="10" />
+                <field field_ref="tops0" level="10" />
+                <field field_ref="topl" level="10" />
+                <field field_ref="topl0" level="10" />
+                <field field_ref="SWupTOA" level="10" />
+                <field field_ref="SWupTOAclr" level="10" />
+                <field field_ref="SWdnTOA" level="10" />
+                <field field_ref="SWdnTOAclr" level="10" />
+                <field field_ref="nettop" level="10" />
+                <field field_ref="SWup200" level="10" />
+                <field field_ref="SWup200clr" level="10" />
+                <field field_ref="SWdn200" level="10" />
+                <field field_ref="SWdn200clr" level="10" />
+                <field field_ref="LWup200" level="10" />
+                <field field_ref="LWup200clr" level="10" />
+                <field field_ref="LWdn200" level="10" />
+                <field field_ref="LWdn200clr" level="10" />
+                <field field_ref="sols" level="10" />
+                <field field_ref="sols0" level="10" />
+                <field field_ref="soll" level="10" />
+                <field field_ref="soll0" level="10" />
+                <field field_ref="radsol" level="10" />
+                <field field_ref="SWupSFC" level="5" />
+                <field field_ref="SWupSFCclr" level="5" />
+                <field field_ref="SWdnSFC" level="5" />
+                <field field_ref="SWdnSFCclr" level="5" />
+                <field field_ref="LWupSFC" level="5" />
+                <field field_ref="LWupSFCclr" level="5" />
+                <field field_ref="LWdnSFC" level="5" />
+                <field field_ref="LWdnSFCclr" level="5" />
+                <field field_ref="bils" level="10" />
+                <field field_ref="bils_tke" level="10" />
+                <field field_ref="bils_diss" level="10" />
+                <field field_ref="bils_ec" level="10" />
+                <field field_ref="bils_kinetic" level="10" />
+                <field field_ref="bils_enthalp" level="10" />
+                <field field_ref="bils_latent" level="10" />
+                <field field_ref="sens" level="5" />
+                <field field_ref="fder" level="10" />
+                <field field_ref="ffonte" level="10" />
+                <field field_ref="fqcalving" level="10" />
+                <field field_ref="fqfonte" level="10" />
+                <field field_ref="taux" level="10" />
+                <field field_ref="tauy" level="10" />
+                <field field_ref="taux_ter" level="10" />
+                <field field_ref="taux_lic" level="10" />
+                <field field_ref="taux_oce" level="10" />
+                <field field_ref="taux_sic" level="10" />
+                <field field_ref="tauy_ter" level="10" />
+                <field field_ref="tauy_lic" level="10" />
+                <field field_ref="tauy_oce" level="10" />
+                <field field_ref="tauy_sic" level="10" />
+                <field field_ref="pourc_ter" level="10" />
+                <field field_ref="pourc_lic" level="10" />
+                <field field_ref="pourc_oce" level="10" />
+                <field field_ref="pourc_sic" level="10" />
+                <field field_ref="fract_ter" level="10" />
+                <field field_ref="fract_lic" level="10" />
+                <field field_ref="fract_oce" level="10" />
+                <field field_ref="fract_sic" level="10" />
+                <field field_ref="tsol_ter" level="10" />
+                <field field_ref="tsol_lic" level="10" />
+                <field field_ref="tsol_oce" level="10" />
+                <field field_ref="tsol_sic" level="10" />
+                <field field_ref="evappot_ter" level="10" />
+                <field field_ref="evappot_lic" level="10" />
+                <field field_ref="evappot_oce" level="10" />
+                <field field_ref="evappot_sic" level="10" />
+                <field field_ref="sens_ter" level="10" />
+                <field field_ref="sens_lic" level="10" />
+                <field field_ref="sens_oce" level="10" />
+                <field field_ref="sens_sic" level="10" />
+                <field field_ref="lat_ter" level="10" />
+                <field field_ref="lat_lic" level="10" />
+                <field field_ref="lat_oce" level="10" />
+                <field field_ref="lat_sic" level="10" />
+                <field field_ref="flw_ter" level="10" />
+                <field field_ref="flw_lic" level="10" />
+                <field field_ref="flw_oce" level="10" />
+                <field field_ref="flw_sic" level="10" />
+                <field field_ref="fsw_ter" level="10" />
+                <field field_ref="fsw_lic" level="10" />
+                <field field_ref="fsw_oce" level="10" />
+                <field field_ref="fsw_sic" level="10" />
+                <field field_ref="wbils_ter" level="10" />
+                <field field_ref="wbils_lic" level="10" />
+                <field field_ref="wbils_oce" level="10" />
+                <field field_ref="wbils_sic" level="10" />
+                <field field_ref="wbilo_ter" level="10" />
+                <field field_ref="wbilo_lic" level="10" />
+                <field field_ref="wbilo_oce" level="10" />
+                <field field_ref="wbilo_sic" level="10" />
+                <field field_ref="cdrm" level="10" />
+                <field field_ref="cdrh" level="10" />
+                <field field_ref="cldl" level="10" />
+                <field field_ref="cldm" level="10" />
+                <field field_ref="cldh" level="10" />
+                <field field_ref="cldt" level="5" />
+                <field field_ref="cldq" level="10" />
+                <field field_ref="lwp" level="10" />
+                <field field_ref="iwp" level="10" />
+                <field field_ref="ue" level="10" />
+                <field field_ref="ve" level="10" />
+                <field field_ref="uq" level="10" />
+                <field field_ref="vq" level="10" />
+                <field field_ref="cape" level="10" />
+                <field field_ref="pbase" level="10" />
+                <field field_ref="ptop" level="10" />
+                <field field_ref="fbase" level="10" />
+                <field field_ref="plcl" level="10" />
+                <field field_ref="plfc" level="10" />
+                <field field_ref="wbeff" level="10" />
+                <field field_ref="prw" level="10" />
+                <field field_ref="s_pblh" level="10" />
+                <field field_ref="s_pblt" level="10" />
+                <field field_ref="s_lcl" level="10" />
+                <field field_ref="s_therm" level="10" />
+                <field field_ref="slab_bils_oce" level="10" />
+                <field field_ref="ale_bl" level="10" />
+                <field field_ref="alp_bl" level="10" />
+                <field field_ref="ale_wk" level="10" />
+                <field field_ref="alp_wk" level="10" />
+                <field field_ref="ale" level="10" />
+                <field field_ref="alp" level="10" />
+                <field field_ref="cin" level="10" />
+                <field field_ref="wape" level="10" />
+                <field field_ref="n2" level="10" />
+                <field field_ref="s2" level="10" />
+                <field field_ref="proba_notrig" level="10" />
+                <field field_ref="random_notrig" level="10" />
+                <field field_ref="ale_bl_stat" level="10" />
+                <field field_ref="ale_bl_trig" level="10" />
+                <field field_ref="alp_bl_det" level="10" />
+                <field field_ref="alp_bl_fluct_m" level="10" />
+                <field field_ref="alp_bl_fluct_tke" level="10" />
+                <field field_ref="alp_bl_conv" level="10" />
+                <field field_ref="alp_bl_stat" level="10" />
+
+                <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+                    <field field_ref="u850" level="10" />
+                    <field field_ref="u700" level="10" />
+                    <field field_ref="u500" level="10" />
+                    <field field_ref="u200" level="10" />
+                    <field field_ref="u100" level="10" />
+                    <field field_ref="u50" level="10" />
+                    <field field_ref="u10" level="10" />
+                    <field field_ref="v850" level="10" />
+                    <field field_ref="v700" level="10" />
+                    <field field_ref="v500" level="10" />
+                    <field field_ref="v200" level="10" />
+                    <field field_ref="v100" level="10" />
+                    <field field_ref="v50" level="10" />
+                    <field field_ref="v10" level="10" />
+                    <field field_ref="w850" level="10" />
+                    <field field_ref="w700" level="10" />
+                    <field field_ref="w500" level="10" />
+                    <field field_ref="w200" level="10" />
+                    <field field_ref="w100" level="10" />
+                    <field field_ref="w50" level="10" />
+                    <field field_ref="w10" level="10" />
+                    <field field_ref="t850" level="10" />
+                    <field field_ref="t700" level="10" />
+                    <field field_ref="t500" level="10" />
+                    <field field_ref="t200" level="10" />
+                    <field field_ref="t100" level="10" />
+                    <field field_ref="t50" level="10" />
+                    <field field_ref="t10" level="10" />
+                    <field field_ref="q850" level="10" />
+                    <field field_ref="q700" level="10" />
+                    <field field_ref="q500" level="10" />
+                    <field field_ref="q200" level="10" />
+                    <field field_ref="q100" level="10" />
+                    <field field_ref="q50" level="10" />
+                    <field field_ref="q10" level="10" />
+                    <field field_ref="z850" level="10" />
+                    <field field_ref="z700" level="10" />
+                    <field field_ref="z500" level="10" />
+                    <field field_ref="z200" level="10" />
+                    <field field_ref="z100" level="10" />
+                    <field field_ref="z50" level="10" />
+                    <field field_ref="z10" level="10" />
+                </field_group>
+
+                <field field_ref="t_oce_sic" level="10" />
+                <field field_ref="weakinv" level="10" />
+                <field field_ref="dthmin" level="10" />
+                <field field_ref="u10_ter" level="10" />
+                <field field_ref="u10_lic" level="10" />
+                <field field_ref="u10_oce" level="10" />
+                <field field_ref="u10_sic" level="10" />
+                <field field_ref="v10_ter" level="10" />
+                <field field_ref="v10_lic" level="10" />
+                <field field_ref="v10_oce" level="10" />
+                <field field_ref="v10_sic" level="10" />
+                <field field_ref="rh2m" level="10" />
+                <field field_ref="rh2m_min" level="10" operation="minimum" />
+                <field field_ref="rh2m_max" level="10" operation="maximum" />
+                <field field_ref="qsat2m" level="10" />
+                <field field_ref="tpot" level="10" />
+                <field field_ref="tpote" level="10" />
+                <field field_ref="tke" level="10" />
+                <field field_ref="tke_ter" level="10" />
+                <field field_ref="tke_lic" level="10" />
+                <field field_ref="tke_oce" level="10" />
+                <field field_ref="tke_sic" level="10" />
+                <field field_ref="tke_max_ter" level="10" operation="maximum" />
+                <field field_ref="tke_max_lic" level="10" operation="maximum" />
+                <field field_ref="tke_max_oce" level="10" operation="maximum" />
+                <field field_ref="tke_max_sic" level="10" operation="maximum" />
+                <field field_ref="SWnetOR" level="10" />
+                <field field_ref="SWdownOR" level="10" />
+                <field field_ref="LWdownOR" level="10" />
+                <field field_ref="snowl" level="10" />
+                <field field_ref="cape_max" level="10" operation="maximum" />
+                <field field_ref="solldown" level="10" />
+                <field field_ref="dtsvdfo" level="10" />
+                <field field_ref="dtsvdft" level="10" />
+                <field field_ref="dtsvdfg" level="10" />
+                <field field_ref="dtsvdfi" level="10" />
+                <field field_ref="rugs" level="10" />
+                <field field_ref="z0m" level="10" />
+                <field field_ref="z0h" level="10" />
+                <field field_ref="topswad" level="10" />
+                <field field_ref="topswad0" level="10" />
+                <field field_ref="topswai" level="10" />
+                <field field_ref="solswad" level="10" />
+                <field field_ref="solswad0" level="10" />
+                <field field_ref="solswai" level="10" />
+                <field field_ref="OD550_ASBCM" level="10" />
+                <field field_ref="OD550_ASPOMM" level="10" />
+                <field field_ref="OD550_ASSO4M" level="10" />
+                <field field_ref="OD550_CSSO4M" level="10" />
+                <field field_ref="OD550_SSSSM" level="10" />
+                <field field_ref="OD550_ASSSM" level="10" />
+                <field field_ref="OD550_CSSSM" level="10" />
+                <field field_ref="OD550_CIDUSTM" level="10" />
+                <field field_ref="OD550_AIBCM" level="10" />
+                <field field_ref="OD550_AIPOMM" level="10" />
+                <field field_ref="OD550_STRAT" level="10" />
+                <field field_ref="od550aer" level="10" />
+                <field field_ref="od865aer" level="10" />
+                <field field_ref="absvisaer" level="10" />
+                <field field_ref="od550lt1aer" level="10" />
+                <field field_ref="sconcso4" level="10" />
+                <field field_ref="sconcoa" level="10" />
+                <field field_ref="sconcbc" level="10" />
+                <field field_ref="sconcss" level="10" />
+                <field field_ref="sconcdust" level="10" />
+                <field field_ref="loadso4" level="10" />
+                <field field_ref="loadoa" level="10" />
+                <field field_ref="loadbc" level="10" />
+                <field field_ref="loadss" level="10" />
+                <field field_ref="loaddust" level="10" />
+                <field field_ref="swtoaas_nat" level="10" />
+                <field field_ref="swsrfas_nat" level="10" />
+                <field field_ref="swtoacs_nat" level="10" />
+                <field field_ref="swsrfcs_nat" level="10" />
+                <field field_ref="swtoaas_ant" level="10" />
+                <field field_ref="swsrfas_ant" level="10" />
+                <field field_ref="swtoacs_ant" level="10" />
+                <field field_ref="swsrfcs_ant" level="10" />
+                <field field_ref="swtoacf_nat" level="10" />
+                <field field_ref="swsrfcf_nat" level="10" />
+                <field field_ref="swtoacf_ant" level="10" />
+                <field field_ref="swsrfcf_ant" level="10" />
+                <field field_ref="swtoacf_zero" level="10" />
+                <field field_ref="swsrfcf_zero" level="10" />
+                <field field_ref="cldncl" level="10" />
+                <field field_ref="reffclwtop" level="10" />
+                <field field_ref="cldnvi" level="10" />
+                <field field_ref="lcc" level="10" />
+                <field field_ref="wvapp" level="10" />
+                <field field_ref="ozone_daylight" level="10" />
+                <field field_ref="albe_ter" level="10" />
+                <field field_ref="albe_lic" level="10" />
+                <field field_ref="albe_oce" level="10" />
+                <field field_ref="albe_sic" level="10" />
+                <field field_ref="ages_ter" level="10" />
+                <field field_ref="ages_lic" level="10" />
+                <field field_ref="ages_oce" level="10" />
+                <field field_ref="ages_sic" level="10" />
+                <field field_ref="snow_ter" level="10" />
+                <field field_ref="snow_lic" level="10" />
+                <field field_ref="snow_oce" level="10" />
+                <field field_ref="snow_sic" level="10" />
+                <field field_ref="rugs_ter" level="10" />
+                <field field_ref="rugs_lic" level="10" />
+                <field field_ref="rugs_oce" level="10" />
+                <field field_ref="rugs_sic" level="10" />
+                <field field_ref="z0m_ter" level="10" />
+                <field field_ref="z0m_lic" level="10" />
+                <field field_ref="z0m_oce" level="10" />
+                <field field_ref="z0m_sic" level="10" />
+                <field field_ref="z0h_ter" level="10" />
+                <field field_ref="z0h_lic" level="10" />
+                <field field_ref="z0h_oce" level="10" />
+                <field field_ref="z0h_sic" level="10" />
+                <field field_ref="alb1" level="10" />
+                <field field_ref="alb2" level="10" />
+                <field field_ref="ftime_con" level="10" operation="instant" />
+                <field field_ref="wake_h" level="10" />
+                <field field_ref="wake_s" level="10" />
+                <field field_ref="plulth" level="10" />
+                <field field_ref="plulst" level="10" />
+                <field field_ref="lmaxth" level="10" />
+                <field field_ref="ftime_th" level="10" />
+                <field field_ref="f0_th" level="10" />
+                <field field_ref="zmax_th" level="10" />
+                <field field_ref="rsut4co2" level="10" />
+                <field field_ref="rlut4co2" level="10" />
+                <field field_ref="rsutcs4co2" level="10" />
+                <field field_ref="rlutcs4co2" level="10" />
+            </field_group>
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" axis_ref="presnivs">
+                <field field_ref="cldtau" level="10" />
+                <field field_ref="cldemi" level="10" />
+                <field field_ref="tke_max" level="10" operation="maximum" />
+                <field field_ref="kz" level="10" />
+                <field field_ref="kz_max" level="10" operation="maximum" />
+                <field field_ref="concso4" level="10" />
+                <field field_ref="concoa" level="10" />
+                <field field_ref="concbc" level="10" />
+                <field field_ref="concss" level="10" />
+                <field field_ref="concdust" level="10" />
+                <field field_ref="ec550aer" level="10" />
+                <field field_ref="lwcon" level="10" />
+                <field field_ref="iwcon" level="10" />
+                <field field_ref="temp" level="10" />
+                <field field_ref="theta" level="10" />
+                <field field_ref="ovap" level="10" />
+                <field field_ref="ovapinit" level="10" />
+                <field field_ref="oliq" level="10" />
+                <field field_ref="geop" level="10" />
+                <field field_ref="vitu" level="10" />
+                <field field_ref="vitv" level="10" />
+                <field field_ref="vitw" level="10" />
+                <field field_ref="pres" level="10" />
+                <field field_ref="paprs" level="10" />
+                <field field_ref="mass" level="10" />
+                <field field_ref="zfull" level="10" />
+                <field field_ref="zhalf" level="10" />
+                <field field_ref="rneb" level="10" />
+                <field field_ref="rnebcon" level="10" />
+                <field field_ref="rnebls" level="10" />
+                <field field_ref="rhum" level="10" />
+                <field field_ref="ozone" level="10" />
+                <field field_ref="upwd" level="10" />
+                <field field_ref="dtphy" level="10" />
+                <field field_ref="dqphy" level="10" />
+                <field field_ref="pr_con_l" level="10" />
+                <field field_ref="pr_con_i" level="10" />
+                <field field_ref="pr_lsc_l" level="10" />
+                <field field_ref="pr_lsc_i" level="10" />
+                <field field_ref="re" level="10" />
+                <field field_ref="fl" level="10" />
+                <field field_ref="scdnc" level="10" />
+                <field field_ref="reffclws" level="10" />
+                <field field_ref="reffclwc" level="10" />
+                <field field_ref="lcc3d" level="10" />
+                <field field_ref="lcc3dcon" level="10" />
+                <field field_ref="lcc3dstra" level="10" />
+                <field field_ref="clwcon" level="10" />
+                <field field_ref="Ma" level="10" />
+                <field field_ref="dnwd" level="10" />
+                <field field_ref="dnwd0" level="10" />
+                <field field_ref="mc" level="10" />
+                <field field_ref="dtdyn" level="10" />
+                <field field_ref="dqdyn" level="10" />
+                <field field_ref="dudyn" level="10" />
+                <field field_ref="dvdyn" level="10" />
+                <field field_ref="dtcon" level="10" />
+                <field field_ref="ducon" level="10" />
+                <field field_ref="dvcon" level="10" />
+                <field field_ref="dqcon" level="10" />
+                <field field_ref="dtwak" level="10" />
+                <field field_ref="dqwak" level="10" />
+                <field field_ref="wake_deltat" level="10" />
+                <field field_ref="wake_deltaq" level="10" />
+                <field field_ref="wake_omg" level="10" />
+                <field field_ref="wdtrainA" level="1" />
+                <field field_ref="wdtrainM" level="1" />
+                <field field_ref="Vprecip" level="10" />
+                <field field_ref="ftd" level="10" />
+                <field field_ref="fqd" level="10" />
+                <field field_ref="dtlsc" level="10" />
+                <field field_ref="dtlschr" level="10" />
+                <field field_ref="dqlsc" level="10" />
+                <field field_ref="beta_prec" level="10" />
+                <field field_ref="dtvdf" level="10" />
+                <field field_ref="dtdis" level="10" />
+                <field field_ref="dqvdf" level="10" />
+                <field field_ref="dteva" level="10" />
+                <field field_ref="dqeva" level="10" />
+                <field field_ref="dqlscth" level="10" />
+                <field field_ref="dqlscst" level="10" />
+                <field field_ref="dtlscth" level="10" />
+                <field field_ref="dtlscst" level="10" />
+                <field field_ref="ptconvth" level="10" />
+                <field field_ref="ptconv" level="10" />
+                <field field_ref="ratqs" level="10" />
+                <field field_ref="dtthe" level="10" />
+                <field field_ref="f_th" level="10" />
+                <field field_ref="e_th" level="10" />
+                <field field_ref="w_th" level="10" />
+                <field field_ref="lambda_th" level="10" />
+                <field field_ref="q_th" level="10" />
+                <field field_ref="a_th" level="10" />
+                <field field_ref="d_th" level="10" />
+                <field field_ref="dqthe" level="10" />
+                <field field_ref="dtajs" level="10" />
+                <field field_ref="dqajs" level="10" />
+                <field field_ref="dtswr" level="10" />
+                <field field_ref="dtsw0" level="10" />
+                <field field_ref="dtlwr" level="10" />
+                <field field_ref="dtlw0" level="10" />
+                <field field_ref="dtec" level="10" />
+                <field field_ref="duvdf" level="10" />
+                <field field_ref="dvvdf" level="10" />
+                <field field_ref="duoro" level="10" />
+                <field field_ref="dvoro" level="10" />
+                <field field_ref="dulif" level="10" />
+                <field field_ref="dvlif" level="10" />
+                <field field_ref="dtoro" level="10" />
+                <field field_ref="dtlif" level="10" />
+                <field field_ref="dthin" level="10" />
+                <field field_ref="rsu" level="10" />
+                <field field_ref="rsd" level="10" />
+                <field field_ref="rlu" level="10" />
+                <field field_ref="rld" level="10" />
+                <field field_ref="rsucs" level="10" />
+                <field field_ref="rsdcs" level="10" />
+                <field field_ref="rlucs" level="10" />
+                <field field_ref="rldcs" level="10" />
+                <field field_ref="tnt" level="10" />
+                <field field_ref="tntc" level="10" />
+                <field field_ref="tntr" level="10" />
+                <field field_ref="tntscpbl" level="10" />
+                <field field_ref="tnhus" level="10" />
+                <field field_ref="tnhusc" level="10" />
+                <field field_ref="tnhusscpbl" level="10" />
+                <field field_ref="evu" level="10" />
+                <field field_ref="h2o" level="10" />
+                <field field_ref="mcd" level="10" />
+                <field field_ref="dmc" level="10" />
+                <field field_ref="ref_liq" level="10" />
+                <field field_ref="ref_ice" level="10" />
+                <field field_ref="rsu4co2" level="10" />
+                <field field_ref="rlu4co2" level="10" />
+                <field field_ref="rsucs4co2" level="10" />
+                <field field_ref="rlucs4co2" level="10" />
+                <field field_ref="rsd4co2" level="10" />
+                <field field_ref="rld4co2" level="10" />
+                <field field_ref="rsdcs4co2" level="10" />
+                <field field_ref="rldcs4co2" level="10" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histdayCOSP_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histdayCOSP_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histdayCOSP_lmdz.xml	(revision 5893)
@@ -0,0 +1,147 @@
+<!-- This file corresponds to the LMDZ5 trunk rev 2448. It might not be compatible    -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+     <file_group id="defile">
+        <file id="histdayCOSP" name="histdayCOSP" output_freq="1d" output_level="1"  enabled="_AUTO_">
+
+            <!-- VARS Calipso and PARASOL -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="cllcalipso"         level="1" />
+                <field field_ref="clmcalipso"         level="1" />
+                <field field_ref="clhcalipso"         level="1" />
+                <field field_ref="cltcalipso"         level="1" />
+                <field field_ref="cllcalipsoice"         level="1" />
+                <field field_ref="clmcalipsoice"         level="1" />
+                <field field_ref="clhcalipsoice"         level="1" />
+                <field field_ref="cltcalipsoice"         level="1" />
+                <field field_ref="cllcalipsoliq"         level="1" />
+                <field field_ref="clmcalipsoliq"         level="1" />
+                <field field_ref="clhcalipsoliq"         level="1" />
+                <field field_ref="cltcalipsoliq"         level="1" />
+                <field field_ref="cllcalipsoun"         level="1" />
+                <field field_ref="clmcalipsoun"         level="1" />
+                <field field_ref="clhcalipsoun"         level="1" />
+                <field field_ref="cltcalipsoun"         level="1" />
+                <field field_ref="clcalipso"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoice"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoliq"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoun"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmp"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpice"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpliq"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpun"  level="1" axis_ref="height" />
+                <field field_ref="parasol_refl"  level="1" axis_ref="sza" />
+                <field field_ref="parasol_crefl"  level="1" axis_ref="sza" />
+                <field field_ref="Ncrefl"  level="1" axis_ref="sza" />
+       		    <field field_ref="c01_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c02_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c03_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c04_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c05_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c06_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c07_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c08_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c09_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c10_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c11_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c12_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c13_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c14_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c15_cfad_lidarsr532"  level="10" axis_ref="height" />
+                <field field_ref="c01_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c02_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c03_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c04_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c05_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c06_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c07_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c08_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c09_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c10_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c11_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c12_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c13_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c14_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c15_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c16_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c17_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c18_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c19_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c20_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="beta_mol532" level="10" axis_ref="height_mlev" />
+              </field_group>
+             <!-- VARS CLOUDSAT et/ou Calipso -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true."> 
+               <field field_ref="cltlidarradar"  level="1"/>
+               <field field_ref="clcalipso2"  level="1" axis_ref="height" />
+               <field field_ref="c01_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c02_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c03_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c04_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c05_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c06_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c07_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c08_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c09_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c10_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c11_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c12_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c13_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c14_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c15_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c01_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c02_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c03_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c04_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c05_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c06_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c07_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c08_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c09_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c10_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c11_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c12_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c13_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c14_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c15_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c16_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c17_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c18_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c19_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c20_dbze94" level="10" axis_ref="height_mlev" />
+              </field_group>
+             <!-- VARS ISCCP -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="sunlit" level="1" />
+                <field field_ref="c01_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c02_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c03_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c04_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c05_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c06_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c07_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="boxtauisccp" level="10" axis_ref="column" />
+                <field field_ref="boxptopisccp" level="10" axis_ref="column" />
+                <field field_ref="tclisccp" level="1" />
+                <field field_ref="ctpisccp" level="1" />
+                <field field_ref="tauisccp" level="1" /> 
+                <field field_ref="albisccp" level="1" />
+                <field field_ref="meantbisccp" level="10" />
+                <field field_ref="meantbclrisccp" level="10" />
+             </field_group>
+             <!-- VARS MISR -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="c01_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c02_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c03_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c04_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c05_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c06_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c07_clMISR" level="1" axis_ref="cth16" />
+            </field_group>
+
+        </file>
+     </file_group>
+</file_definition>
+   
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histdayNMC_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histdayNMC_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histdayNMC_lmdz.xml	(revision 5893)
@@ -0,0 +1,33 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histdayNMC" name="histdayNMC" output_freq="1d" output_level="5" enabled="_AUTO_">
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+<!--            <field field_ref="tnondef" level="5" /> -->
+                <field field_ref="ta" level="1" />
+                <field field_ref="zg" level="5" />
+                <field field_ref="hus" level="5" />
+                <field field_ref="hur" level="5" />
+                <field field_ref="ua" level="5" />
+                <field field_ref="va" level="5" />
+                <field field_ref="wap" level="5" />
+<!--            <field field_ref="psbg" level="5" /> -->
+                <field field_ref="tro3" level="5" />
+                <field field_ref="tro3_daylight" level="5" />
+                <field field_ref="uv" level="6" />
+                <!-- <field field_ref="vq" level="6" /> -->
+                <field field_ref="vT" level="6" />
+                <field field_ref="wq" level="6" />
+                <field field_ref="vphi" level="6" />
+                <field field_ref="wT" level="6" />
+                <field field_ref="u2" level="6" />
+                <field field_ref="v2" level="6" />
+                <field field_ref="T2" level="6" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histday_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histday_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histday_lmdz.xml	(revision 5893)
@@ -0,0 +1,531 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histday" name="histday" output_freq="1d" output_level="_AUTO_" enabled="_AUTO_">
+            
+            <!-- VARS 1D -->
+<!--            <field_group operation="once">  -->
+<!--              <field field_ref="Ap" level="1" />  -->
+<!--              <field field_ref="Bp" level="1" /> -->
+<!--              <field field_ref="Alt" level="1" /> -->
+<!--            </field_group> -->
+        
+            <!-- VARS 2D -->
+            <field_group operation="average" freq_op="1ts">
+                <field field_ref="phis" level="1" />
+                <field field_ref="aire" level="1" operation="once" />
+                <field field_ref="contfracATM" level="1" operation="once" />
+                <field field_ref="contfracOR" level="1" />
+                <field field_ref="aireTER" level="10" />
+                <field field_ref="flat" level="1" />
+                <field field_ref="slp" level="1" />
+                <field field_ref="tsol" level="1" />
+                <field field_ref="t2m" level="1" />
+                <field field_ref="t2m_min" level="1" operation="minimum" />
+                <field field_ref="t2m_max" level="1" operation="maximum" />
+                <field field_ref="t2m_ter" level="6" />
+                <field field_ref="t2m_lic" level="6" />
+                <field field_ref="t2m_oce" level="6" />
+                <field field_ref="t2m_sic" level="6" />
+                <field field_ref="gusts" level="1" />
+                <field field_ref="wind10m" level="1" />
+                <field field_ref="wind10max" level="1" operation="maximum" />
+                <field field_ref="sicf" level="1" />
+                <field field_ref="q2m" level="1" />
+                <field field_ref="ustar" level="1" />
+                <field field_ref="u10m" level="1" />
+                <field field_ref="v10m" level="1" />
+                <field field_ref="psol" level="1" />
+                <field field_ref="qsurf" level="10" />
+                <field field_ref="ustar_ter" level="6" />
+                <field field_ref="ustar_lic" level="6" />
+                <field field_ref="ustar_oce" level="6" />
+                <field field_ref="ustar_sic" level="6" />
+                <field field_ref="wstar_ter" level="6" />
+                <field field_ref="wstar_lic" level="6" />
+                <field field_ref="wstar_oce" level="6" />
+                <field field_ref="wstar_sic" level="6" />
+                <field field_ref="wstar" level="5" />
+                <field field_ref="u10m_ter" level="6" />
+                <field field_ref="u10m_lic" level="6" />
+                <field field_ref="u10m_oce" level="6" />
+                <field field_ref="u10m_sic" level="6" />
+                <field field_ref="v10m_ter" level="6" />
+                <field field_ref="v10m_lic" level="6" />
+                <field field_ref="v10m_oce" level="6" />
+                <field field_ref="v10m_sic" level="6" />
+                <field field_ref="qsol" level="10" />
+                <field field_ref="ndayrain" level="10" operation="instant" />
+                <field field_ref="precip" level="1" />
+                <field field_ref="plul" level="1" />
+                <field field_ref="pluc" level="1" />
+                <field field_ref="snow" level="1" />
+                <field field_ref="evap" level="1" />
+                <field field_ref="evap_ter" level="6" />
+                <field field_ref="evap_lic" level="6" />
+                <field field_ref="evap_oce" level="6" />
+                <field field_ref="evap_sic" level="6" />
+                <field field_ref="msnow" level="10" />
+                <field field_ref="fsnow" level="10" />
+                <field field_ref="tops" level="1" />
+                <field field_ref="tops0" level="5" />
+                <field field_ref="topl" level="1" />
+                <field field_ref="topl0" level="5" />
+                <field field_ref="SWupTOA" level="4" />
+                <field field_ref="SWupTOAclr" level="4" />
+                <field field_ref="SWdnTOA" level="4" />
+                <field field_ref="SWdnTOAclr" level="4" />
+                <field field_ref="nettop" level="4" />
+                <field field_ref="SWup200" level="10" />
+                <field field_ref="SWup200clr" level="1" />
+                <field field_ref="SWdn200" level="10" />
+                <field field_ref="SWdn200clr" level="1" />
+                <field field_ref="LWup200" level="10" />
+                <field field_ref="LWup200clr" level="10" />
+                <field field_ref="LWdn200" level="10" />
+                <field field_ref="LWdn200clr" level="10" />
+                <field field_ref="sols" level="1" />
+                <field field_ref="sols0" level="5" />
+                <field field_ref="soll" level="1" />
+                <field field_ref="soll0" level="5" />
+                <field field_ref="radsol" level="7" />
+                <field field_ref="SWupSFC" level="4" />
+                <field field_ref="SWupSFCclr" level="4" />
+                <field field_ref="SWdnSFC" level="1" />
+                <field field_ref="SWdnSFCclr" level="4" />
+                <field field_ref="LWupSFC" level="4" />
+                <field field_ref="LWupSFCclr" level="4" />
+                <field field_ref="LWdnSFC" level="4" />
+                <field field_ref="LWdnSFCclr" level="4" />
+                <field field_ref="bils" level="2" />
+                <field field_ref="bils_tke" level="2" />
+                <field field_ref="bils_diss" level="2" />
+                <field field_ref="bils_ec" level="2" />
+                <field field_ref="bils_kinetic" level="2" />
+                <field field_ref="bils_enthalp" level="2" />
+                <field field_ref="bils_latent" level="2" />
+                <field field_ref="sens" level="1" />
+                <field field_ref="fder" level="2" />
+                <field field_ref="ffonte" level="10" />
+                <field field_ref="fqcalving" level="10" />
+                <field field_ref="fqfonte" level="10" />
+                <field field_ref="taux" level="10" />
+                <field field_ref="tauy" level="10" />
+                <field field_ref="taux_ter" level="6" />
+                <field field_ref="taux_lic" level="6" />
+                <field field_ref="taux_oce" level="6" />
+                <field field_ref="taux_sic" level="6" />
+                <field field_ref="tauy_ter" level="6" />
+                <field field_ref="tauy_lic" level="6" />
+                <field field_ref="tauy_oce" level="6" />
+                <field field_ref="tauy_sic" level="6" />
+                <field field_ref="pourc_ter" level="7" />
+                <field field_ref="pourc_lic" level="7" />
+                <field field_ref="pourc_oce" level="7" />
+                <field field_ref="pourc_sic" level="7" />
+                <field field_ref="fract_ter" level="6" />
+                <field field_ref="fract_lic" level="6" />
+                <field field_ref="fract_oce" level="6" />
+                <field field_ref="fract_sic" level="6" />
+                <field field_ref="tsol_ter" level="6" />
+                <field field_ref="tsol_lic" level="6" />
+                <field field_ref="tsol_oce" level="6" />
+                <field field_ref="tsol_sic" level="6" />
+                <field field_ref="evappot_ter" level="6" />
+                <field field_ref="evappot_lic" level="6" />
+                <field field_ref="evappot_oce" level="6" />
+                <field field_ref="evappot_sic" level="6" />
+                <field field_ref="sens_ter" level="6" />
+                <field field_ref="sens_lic" level="6" />
+                <field field_ref="sens_oce" level="6" />
+                <field field_ref="sens_sic" level="6" />
+                <field field_ref="lat_ter" level="6" />
+                <field field_ref="lat_lic" level="6" />
+                <field field_ref="lat_oce" level="6" />
+                <field field_ref="lat_sic" level="6" />
+                <field field_ref="flw_ter" level="10" />
+                <field field_ref="flw_lic" level="10" />
+                <field field_ref="flw_oce" level="10" />
+                <field field_ref="flw_sic" level="10" />
+                <field field_ref="fsw_ter" level="10" />
+                <field field_ref="fsw_lic" level="10" />
+                <field field_ref="fsw_oce" level="10" />
+                <field field_ref="fsw_sic" level="10" />
+                <field field_ref="wbils_ter" level="10" />
+                <field field_ref="wbils_lic" level="10" />
+                <field field_ref="wbils_oce" level="10" />
+                <field field_ref="wbils_sic" level="10" />
+                <field field_ref="wbilo_ter" level="10" />
+                <field field_ref="wbilo_lic" level="10" />
+                <field field_ref="wbilo_oce" level="10" />
+                <field field_ref="wbilo_sic" level="10" />
+                <field field_ref="cdrm" level="10" />
+                <field field_ref="cdrh" level="10" />
+                <field field_ref="cldl" level="1" />
+                <field field_ref="cldm" level="1" />
+                <field field_ref="cldh" level="1" />
+                <field field_ref="cldt" level="1" />
+                <field field_ref="cldq" level="1" />
+                <field field_ref="lwp" level="5" />
+                <field field_ref="iwp" level="5" />
+                <field field_ref="ue" level="10" />
+                <field field_ref="ve" level="10" />
+                <field field_ref="uq" level="10" />
+                <field field_ref="vq" level="10" />
+                <field field_ref="cape" level="10" />
+                <field field_ref="pbase" level="5" />
+                <field field_ref="ptop" level="5" />
+                <field field_ref="fbase" level="10" />
+                <field field_ref="plcl" level="10" />
+                <field field_ref="plfc" level="10" />
+                <field field_ref="wbeff" level="10" />
+                <field field_ref="prw" level="1" />
+                <field field_ref="s_pblh" level="10" />
+                <field field_ref="s_pblt" level="10" />
+                <field field_ref="s_lcl" level="10" />
+                <field field_ref="s_therm" level="10" />
+                <field field_ref="slab_bils_oce" level="1" />
+                <field field_ref="ale_bl" level="1" />
+                <field field_ref="alp_bl" level="1" />
+                <field field_ref="ale_wk" level="1" />
+                <field field_ref="alp_wk" level="1" />
+                <field field_ref="ale" level="1" />
+                <field field_ref="alp" level="1" />
+                <field field_ref="cin" level="1" />
+                <field field_ref="wape" level="1" />
+                <field field_ref="n2" level="1" />
+                <field field_ref="s2" level="1" />
+                <field field_ref="proba_notrig" level="1" />
+                <field field_ref="random_notrig" level="1" />
+                <field field_ref="ale_bl_stat" level="1" />
+                <field field_ref="ale_bl_trig" level="1" />
+                <field field_ref="alp_bl_det" level="1" />
+                <field field_ref="alp_bl_fluct_m" level="1" />
+                <field field_ref="alp_bl_fluct_tke" level="1" />
+                <field field_ref="alp_bl_conv" level="1" />
+                <field field_ref="alp_bl_stat" level="1" />
+
+                <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+                    <field field_ref="u850" level="7" />
+                    <field field_ref="u700" level="7" />
+                    <field field_ref="u500" level="7" />
+                    <field field_ref="u200" level="7" />
+                    <field field_ref="u100" level="7" />
+                    <field field_ref="u50" level="7" />
+                    <field field_ref="u10" level="7" />
+                    <field field_ref="v850" level="7" />
+                    <field field_ref="v700" level="7" />
+                    <field field_ref="v500" level="7" />
+                    <field field_ref="v200" level="7" />
+                    <field field_ref="v100" level="7" />
+                    <field field_ref="v50" level="7" />
+                    <field field_ref="v10" level="7" />
+                    <field field_ref="w850" level="7" />
+                    <field field_ref="w700" level="7" />
+                    <field field_ref="w500" level="7" />
+                    <field field_ref="w200" level="7" />
+                    <field field_ref="w100" level="7" />
+                    <field field_ref="w50" level="7" />
+                    <field field_ref="w10" level="7" />
+                    <field field_ref="t850" level="7" />
+                    <field field_ref="t700" level="7" />
+                    <field field_ref="t500" level="7" />
+                    <field field_ref="t200" level="7" />
+                    <field field_ref="t100" level="7" />
+                    <field field_ref="t50" level="7" />
+                    <field field_ref="t10" level="7" />
+                    <field field_ref="q850" level="7" />
+                    <field field_ref="q700" level="7" />
+                    <field field_ref="q500" level="7" />
+                    <field field_ref="q200" level="7" />
+                    <field field_ref="q100" level="7" />
+                    <field field_ref="q50" level="7" />
+                    <field field_ref="q10" level="7" />
+                    <field field_ref="z850" level="7" />
+                    <field field_ref="z700" level="7" />
+                    <field field_ref="z500" level="7" />
+                    <field field_ref="z200" level="7" />
+                    <field field_ref="z100" level="7" />
+                    <field field_ref="z50" level="7" />
+                    <field field_ref="z10" level="7" />
+                </field_group>
+
+                <field field_ref="t_oce_sic" level="10" />
+                <field field_ref="weakinv" level="1" />
+                <field field_ref="dthmin" level="1" />
+                <field field_ref="u10_ter" level="4" />
+                <field field_ref="u10_lic" level="4" />
+                <field field_ref="u10_oce" level="4" />
+                <field field_ref="u10_sic" level="4" />
+                <field field_ref="v10_ter" level="4" />
+                <field field_ref="v10_lic" level="4" />
+                <field field_ref="v10_oce" level="4" />
+                <field field_ref="v10_sic" level="4" />
+                <field field_ref="rh2m" level="5" />
+                <field field_ref="rh2m_min" level="5" operation="minimum" />
+                <field field_ref="rh2m_max" level="5" operation="maximum" />
+                <field field_ref="qsat2m" level="5" />
+                <field field_ref="tpot" level="5" />
+                <field field_ref="tpote" level="5" />
+                <field field_ref="tke" level="10" />
+                <field field_ref="tke_ter" level="4" />
+                <field field_ref="tke_lic" level="4" />
+                <field field_ref="tke_oce" level="4" />
+                <field field_ref="tke_sic" level="4" />
+                <field field_ref="tke_max_ter" level="4" operation="maximum" />
+                <field field_ref="tke_max_lic" level="4" operation="maximum" />
+                <field field_ref="tke_max_oce" level="4" operation="maximum" />
+                <field field_ref="tke_max_sic" level="4" operation="maximum" />
+                <field field_ref="SWnetOR" level="10" />
+                <field field_ref="SWdownOR" level="10" />
+                <field field_ref="LWdownOR" level="10" />
+                <field field_ref="snowl" level="1" />
+                <field field_ref="cape_max" level="1" operation="maximum" />
+                <field field_ref="solldown" level="1" />
+                <field field_ref="dtsvdfo" level="10" />
+                <field field_ref="dtsvdft" level="10" />
+                <field field_ref="dtsvdfg" level="10" />
+                <field field_ref="dtsvdfi" level="10" />
+                <field field_ref="rugs" level="10" />
+                <field field_ref="z0m" level="10" />
+                <field field_ref="z0h" level="10" />
+                <field field_ref="topswad" level="10" />
+                <field field_ref="topswad0" level="10" />
+                <field field_ref="topswai" level="10" />
+                <field field_ref="solswad" level="10" />
+                <field field_ref="solswad0" level="10" />
+                <field field_ref="solswai" level="10" />
+                <field field_ref="OD550_ASBCM" level="6" />
+                <field field_ref="OD550_ASPOMM" level="6" />
+                <field field_ref="OD550_ASSO4M" level="6" />
+                <field field_ref="OD550_CSSO4M" level="6" />
+                <field field_ref="OD550_SSSSM" level="6" />
+                <field field_ref="OD550_ASSSM" level="6" />
+                <field field_ref="OD550_CSSSM" level="6" />
+                <field field_ref="OD550_CIDUSTM" level="6" />
+                <field field_ref="OD550_AIBCM" level="6" />
+                <field field_ref="OD550_AIPOMM" level="6" />
+                <field field_ref="OD550_STRAT" level="2" />
+                <field field_ref="od550aer" level="6" />
+                <field field_ref="od865aer" level="6" />
+                <field field_ref="absvisaer" level="6" />
+                <field field_ref="od550lt1aer" level="6" />
+                <field field_ref="sconcso4" level="6" />
+                <field field_ref="sconcoa" level="6" />
+                <field field_ref="sconcbc" level="6" />
+                <field field_ref="sconcss" level="6" />
+                <field field_ref="sconcdust" level="6" />
+                <field field_ref="loadso4" level="6" />
+                <field field_ref="loadoa" level="6" />
+                <field field_ref="loadbc" level="6" />
+                <field field_ref="loadss" level="6" />
+                <field field_ref="loaddust" level="6" />
+                <field field_ref="swtoaas_nat" level="6" />
+                <field field_ref="swsrfas_nat" level="6" />
+                <field field_ref="swtoacs_nat" level="6" />
+                <field field_ref="swsrfcs_nat" level="6" />
+                <field field_ref="swtoaas_ant" level="6" />
+                <field field_ref="swsrfas_ant" level="6" />
+                <field field_ref="swtoacs_ant" level="6" />
+                <field field_ref="swsrfcs_ant" level="6" />
+                <field field_ref="swtoacf_nat" level="6" />
+                <field field_ref="swsrfcf_nat" level="6" />
+                <field field_ref="swtoacf_ant" level="6" />
+                <field field_ref="swsrfcf_ant" level="6" />
+                <field field_ref="swtoacf_zero" level="6" />
+                <field field_ref="swsrfcf_zero" level="6" />
+                <field field_ref="cldncl" level="6" />
+                <field field_ref="reffclwtop" level="6" />
+                <field field_ref="cldnvi" level="6" />
+                <field field_ref="lcc" level="6" />
+                <field field_ref="wvapp" level="10" />
+                <field field_ref="ozone_daylight" level="10" />
+                <field field_ref="albe_ter" level="7" />
+                <field field_ref="albe_lic" level="7" />
+                <field field_ref="albe_oce" level="7" />
+                <field field_ref="albe_sic" level="7" />
+                <field field_ref="ages_ter" level="10" />
+                <field field_ref="ages_lic" level="10" />
+                <field field_ref="ages_oce" level="10" />
+                <field field_ref="ages_sic" level="10" />
+                <field field_ref="snow_ter" level="10" />
+                <field field_ref="snow_lic" level="10" />
+                <field field_ref="snow_oce" level="10" />
+                <field field_ref="snow_sic" level="10" />
+                <field field_ref="rugs_ter" level="6" />
+                <field field_ref="rugs_lic" level="6" />
+                <field field_ref="rugs_oce" level="6" />
+                <field field_ref="rugs_sic" level="6" />
+                <field field_ref="z0m_ter" level="6" />
+                <field field_ref="z0m_lic" level="6" />
+                <field field_ref="z0m_oce" level="6" />
+                <field field_ref="z0m_sic" level="6" />
+                <field field_ref="z0h_ter" level="6" />
+                <field field_ref="z0h_lic" level="6" />
+                <field field_ref="z0h_oce" level="6" />
+                <field field_ref="z0h_sic" level="6" />
+                <field field_ref="alb1" level="10" />
+                <field field_ref="alb2" level="10" />
+                <field field_ref="ftime_con" level="10" operation="instant" />
+                <field field_ref="wake_h" level="5" />
+                <field field_ref="wake_s" level="5" />
+                <field field_ref="plulth" level="10" />
+                <field field_ref="plulst" level="10" />
+                <field field_ref="lmaxth" level="10" />
+                <field field_ref="ftime_th" level="10" />
+                <field field_ref="f0_th" level="10" />
+                <field field_ref="zmax_th" level="4" />
+                <field field_ref="rsut4co2" level="10" />
+                <field field_ref="rlut4co2" level="10" />
+                <field field_ref="rsutcs4co2" level="10" />
+                <field field_ref="rlutcs4co2" level="10" />
+            </field_group>
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" axis_ref="presnivs">
+                <field field_ref="cldtau" level="5" />
+                <field field_ref="cldemi" level="5" />
+                <field field_ref="tke_max" level="10" operation="maximum" />
+                <field field_ref="kz" level="10" />
+                <field field_ref="kz_max" level="10" operation="maximum" />
+                <field field_ref="concso4" level="6" />
+                <field field_ref="concoa" level="6" />
+                <field field_ref="concbc" level="6" />
+                <field field_ref="concss" level="6" />
+                <field field_ref="concdust" level="6" />
+                <field field_ref="ec550aer" level="6" />
+                <field field_ref="lwcon" level="5" />
+                <field field_ref="iwcon" level="5" />
+                <field field_ref="temp" level="3" />
+                <field field_ref="theta" level="3" />
+                <field field_ref="ovap" level="3" />
+                <field field_ref="ovapinit" level="10" />
+                <field field_ref="oliq" level="3" />
+                <field field_ref="geop" level="3" />
+                <field field_ref="vitu" level="3" />
+                <field field_ref="vitv" level="3" />
+                <field field_ref="vitw" level="3" />
+                <field field_ref="pres" level="3" />
+                <field field_ref="paprs" level="3" />
+                <field field_ref="mass" level="3" />
+                <field field_ref="zfull" level="3" />
+                <field field_ref="zhalf" level="3" />
+                <field field_ref="rneb" level="5" />
+                <field field_ref="rnebcon" level="5" />
+                <field field_ref="rnebls" level="5" />
+                <field field_ref="rhum" level="5" />
+                <field field_ref="ozone" level="10" />
+                <field field_ref="upwd" level="10" />
+                <field field_ref="dtphy" level="10" />
+                <field field_ref="dqphy" level="10" />
+                <field field_ref="pr_con_l" level="10" />
+                <field field_ref="pr_con_i" level="10" />
+                <field field_ref="pr_lsc_l" level="10" />
+                <field field_ref="pr_lsc_i" level="10" />
+                <field field_ref="re" level="10" />
+                <field field_ref="fl" level="10" />
+                <field field_ref="scdnc" level="6" />
+                <field field_ref="reffclws" level="6" />
+                <field field_ref="reffclwc" level="6" />
+                <field field_ref="lcc3d" level="6" />
+                <field field_ref="lcc3dcon" level="6" />
+                <field field_ref="lcc3dstra" level="6" />
+                <field field_ref="clwcon" level="10" />
+                <field field_ref="Ma" level="10" />
+                <field field_ref="dnwd" level="10" />
+                <field field_ref="dnwd0" level="10" />
+                <field field_ref="mc" level="5" />
+                <field field_ref="dtdyn" level="10" />
+                <field field_ref="dqdyn" level="10" />
+                <field field_ref="dudyn" level="10" />
+                <field field_ref="dvdyn" level="10" />
+                <field field_ref="dtcon" level="10" />
+                <field field_ref="ducon" level="10" />
+                <field field_ref="dvcon" level="10" />
+                <field field_ref="dqcon" level="10" />
+                <field field_ref="dtwak" level="5" />
+                <field field_ref="dqwak" level="5" />
+                <field field_ref="wake_deltat" level="5" />
+                <field field_ref="wake_deltaq" level="5" />
+                <field field_ref="wake_omg" level="5" />
+                <field field_ref="wdtrainA" level="1" />
+                <field field_ref="wdtrainM" level="1" />
+                <field field_ref="Vprecip" level="10" />
+                <field field_ref="ftd" level="5" />
+                <field field_ref="fqd" level="5" />
+                <field field_ref="dtlsc" level="10" />
+                <field field_ref="dtlschr" level="10" />
+                <field field_ref="dqlsc" level="10" />
+                <field field_ref="beta_prec" level="10" />
+                <field field_ref="dtvdf" level="10" />
+                <field field_ref="dtdis" level="10" />
+                <field field_ref="dqvdf" level="10" />
+                <field field_ref="dteva" level="10" />
+                <field field_ref="dqeva" level="10" />
+                <field field_ref="dqlscth" level="10" />
+                <field field_ref="dqlscst" level="10" />
+                <field field_ref="dtlscth" level="10" />
+                <field field_ref="dtlscst" level="10" />
+                <field field_ref="ptconvth" level="10" />
+                <field field_ref="ptconv" level="10" />
+                <field field_ref="ratqs" level="10" />
+                <field field_ref="dtthe" level="10" />
+                <field field_ref="f_th" level="10" />
+                <field field_ref="e_th" level="10" />
+                <field field_ref="w_th" level="10" />
+                <field field_ref="lambda_th" level="10" />
+                <field field_ref="q_th" level="10" />
+                <field field_ref="a_th" level="10" />
+                <field field_ref="d_th" level="10" />
+                <field field_ref="dqthe" level="10" />
+                <field field_ref="dtajs" level="10" />
+                <field field_ref="dqajs" level="10" />
+                <field field_ref="dtswr" level="10" />
+                <field field_ref="dtsw0" level="10" />
+                <field field_ref="dtlwr" level="10" />
+                <field field_ref="dtlw0" level="10" />
+                <field field_ref="dtec" level="10" />
+                <field field_ref="duvdf" level="10" />
+                <field field_ref="dvvdf" level="10" />
+                <field field_ref="duoro" level="10" />
+                <field field_ref="dvoro" level="10" />
+                <field field_ref="dulif" level="10" />
+                <field field_ref="dvlif" level="10" />
+                <field field_ref="dtoro" level="10" />
+                <field field_ref="dtlif" level="10" />
+                <field field_ref="dthin" level="10" />
+                <field field_ref="rsu" level="10" />
+                <field field_ref="rsd" level="10" />
+                <field field_ref="rlu" level="10" />
+                <field field_ref="rld" level="10" />
+                <field field_ref="rsucs" level="10" />
+                <field field_ref="rsdcs" level="10" />
+                <field field_ref="rlucs" level="10" />
+                <field field_ref="rldcs" level="10" />
+                <field field_ref="tnt" level="10" />
+                <field field_ref="tntc" level="10" />
+                <field field_ref="tntr" level="10" />
+                <field field_ref="tntscpbl" level="10" />
+                <field field_ref="tnhus" level="10" />
+                <field field_ref="tnhusc" level="10" />
+                <field field_ref="tnhusscpbl" level="10" />
+                <field field_ref="evu" level="10" />
+                <field field_ref="h2o" level="10" />
+                <field field_ref="mcd" level="10" />
+                <field field_ref="dmc" level="10" />
+                <field field_ref="ref_liq" level="10" />
+                <field field_ref="ref_ice" level="10" />
+                <field field_ref="rsu4co2" level="10" />
+                <field field_ref="rlu4co2" level="10" />
+                <field field_ref="rsucs4co2" level="10" />
+                <field field_ref="rlucs4co2" level="10" />
+                <field field_ref="rsd4co2" level="10" />
+                <field field_ref="rld4co2" level="10" />
+                <field field_ref="rsdcs4co2" level="10" />
+                <field field_ref="rldcs4co2" level="10" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhfCOSP_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhfCOSP_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhfCOSP_lmdz.xml	(revision 5893)
@@ -0,0 +1,147 @@
+<!-- This file corresponds to the LMDZ5 trunk rev 2448. It might not be compatible    -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+     <file_group id="defile">
+        <file id="histhfCOSP" name="histhfCOSP" output_freq="3h" output_level="1"  enabled="_AUTO_">
+
+            <!-- VARS Calipso and PARASOL -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="cllcalipso"         level="1" />
+                <field field_ref="clmcalipso"         level="1" />
+                <field field_ref="clhcalipso"         level="1" />
+                <field field_ref="cltcalipso"         level="1" />
+                <field field_ref="cllcalipsoice"         level="1" />
+                <field field_ref="clmcalipsoice"         level="1" />
+                <field field_ref="clhcalipsoice"         level="1" />
+                <field field_ref="cltcalipsoice"         level="1" />
+                <field field_ref="cllcalipsoliq"         level="1" />
+                <field field_ref="clmcalipsoliq"         level="1" />
+                <field field_ref="clhcalipsoliq"         level="1" />
+                <field field_ref="cltcalipsoliq"         level="1" />
+                <field field_ref="cllcalipsoun"         level="1" />
+                <field field_ref="clmcalipsoun"         level="1" />
+                <field field_ref="clhcalipsoun"         level="1" />
+                <field field_ref="cltcalipsoun"         level="1" />
+                <field field_ref="clcalipso"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoice"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoliq"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoun"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmp"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpice"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpliq"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpun"  level="1" axis_ref="height" />
+                <field field_ref="parasol_refl"  level="1" axis_ref="sza" />
+                <field field_ref="parasol_crefl"  level="1" axis_ref="sza" />
+                <field field_ref="Ncrefl"  level="1" axis_ref="sza" />
+       		    <field field_ref="c01_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c02_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c03_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c04_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c05_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c06_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c07_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c08_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c09_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c10_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c11_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c12_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c13_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c14_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c15_cfad_lidarsr532"  level="10" axis_ref="height" />
+                <field field_ref="c01_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c02_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c03_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c04_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c05_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c06_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c07_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c08_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c09_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c10_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c11_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c12_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c13_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c14_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c15_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c16_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c17_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c18_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c19_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c20_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="beta_mol532" level="10" axis_ref="height_mlev" />
+              </field_group>
+             <!-- VARS CLOUDSAT et/ou Calipso -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true."> 
+               <field field_ref="cltlidarradar"  level="1"/>
+               <field field_ref="clcalipso2"  level="1" axis_ref="height" />
+               <field field_ref="c01_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c02_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c03_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c04_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c05_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c06_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c07_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c08_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c09_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c10_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c11_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c12_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c13_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c14_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c15_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c01_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c02_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c03_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c04_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c05_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c06_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c07_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c08_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c09_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c10_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c11_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c12_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c13_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c14_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c15_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c16_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c17_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c18_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c19_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c20_dbze94" level="10" axis_ref="height_mlev" />
+              </field_group>
+             <!-- VARS ISCCP -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="sunlit" level="1" />
+                <field field_ref="c01_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c02_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c03_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c04_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c05_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c06_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c07_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="boxtauisccp" level="10" axis_ref="column" />
+                <field field_ref="boxptopisccp" level="10" axis_ref="column" />
+                <field field_ref="tclisccp" level="1" />
+                <field field_ref="ctpisccp" level="1" />
+                <field field_ref="tauisccp" level="1" /> 
+                <field field_ref="albisccp" level="1" />
+                <field field_ref="meantbisccp" level="10" />
+                <field field_ref="meantbclrisccp" level="10" />
+             </field_group>
+             <!-- VARS MISR -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="c01_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c02_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c03_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c04_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c05_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c06_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c07_clMISR" level="1" axis_ref="cth16" />
+            </field_group>
+
+        </file>
+     </file_group>
+</file_definition>
+   
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhfNMC_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhfNMC_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhfNMC_lmdz.xml	(revision 5893)
@@ -0,0 +1,33 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histhfNMC" name="histhfNMC" output_freq="6h" output_level="5" enabled="_AUTO_">
+
+            <!-- VARS 3D -->
+            <field_group operation="instant" freq_op="1ts" detect_missing_value=".true." >
+<!--            <field field_ref="tnondef" level="5" />  -->
+                <field field_ref="ta" level="1" />
+                <field field_ref="zg" level="5" />
+                <field field_ref="hus" level="5" />
+                <field field_ref="hur" level="5" />
+                <field field_ref="ua" level="5" />
+                <field field_ref="va" level="5" />
+                <field field_ref="wap" level="5" />
+<!--            <field field_ref="psbg" level="5" /> -->
+                <field field_ref="tro3" level="5" />
+                <field field_ref="tro3_daylight" level="5" />
+                <field field_ref="uv" level="6" />
+                <!-- <field field_ref="vq" level="6" /> -->
+                <field field_ref="vT" level="6" />
+                <field field_ref="wq" level="6" />
+                <field field_ref="vphi" level="6" />
+                <field field_ref="wT" level="6" />
+                <field field_ref="u2" level="6" />
+                <field field_ref="v2" level="6" />
+                <field field_ref="T2" level="6" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhf_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhf_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histhf_lmdz.xml	(revision 5893)
@@ -0,0 +1,531 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histhf" name="histhf" output_freq="6h" output_level="_AUTO_" enabled="_AUTO_">
+            
+            <!-- VARS 1D -->
+<!--            <field_group operation="once"> -->
+<!--              <field field_ref="Ap" level="1" /> -->
+<!--              <field field_ref="Bp" level="1" /> -->
+<!--              <field field_ref="Alt" level="1" /> -->
+<!--            </field_group> -->
+        
+            <!-- VARS 2D -->
+            <field_group operation="average" freq_op="1ts">
+                <field field_ref="phis" level="5" />
+                <field field_ref="aire" level="10" operation="once" />
+                <field field_ref="contfracATM" level="10" operation="once" />
+                <field field_ref="contfracOR" level="10" />
+                <field field_ref="aireTER" level="10" />
+                <field field_ref="flat" level="10" />
+                <field field_ref="slp" level="10" />
+                <field field_ref="tsol" level="5" />
+                <field field_ref="t2m" level="5" />
+                <field field_ref="t2m_min" level="10" operation="minimum" />
+                <field field_ref="t2m_max" level="10" operation="maximum" />
+                <field field_ref="t2m_ter" level="10" />
+                <field field_ref="t2m_lic" level="10" />
+                <field field_ref="t2m_oce" level="10" />
+                <field field_ref="t2m_sic" level="10" />
+                <field field_ref="gusts" level="10" />
+                <field field_ref="wind10m" level="10" />
+                <field field_ref="wind10max" level="10" operation="maximum" />
+                <field field_ref="sicf" level="10" />
+                <field field_ref="q2m" level="5" />
+                <field field_ref="ustar" level="5" />
+                <field field_ref="u10m" level="5" />
+                <field field_ref="v10m" level="5" />
+                <field field_ref="psol" level="5" />
+                <field field_ref="qsurf" level="10" />
+                <field field_ref="ustar_ter" level="10" />
+                <field field_ref="ustar_lic" level="10" />
+                <field field_ref="ustar_oce" level="10" />
+                <field field_ref="ustar_sic" level="10" />
+                <field field_ref="wstar_ter" level="10" />
+                <field field_ref="wstar_lic" level="10" />
+                <field field_ref="wstar_oce" level="10" />
+                <field field_ref="wstar_sic" level="10" />
+                <field field_ref="wstar" level="10" />
+                <field field_ref="u10m_ter" level="10" />
+                <field field_ref="u10m_lic" level="10" />
+                <field field_ref="u10m_oce" level="10" />
+                <field field_ref="u10m_sic" level="10" />
+                <field field_ref="v10m_ter" level="10" />
+                <field field_ref="v10m_lic" level="10" />
+                <field field_ref="v10m_oce" level="10" />
+                <field field_ref="v10m_sic" level="10" />
+                <field field_ref="qsol" level="10" />
+                <field field_ref="ndayrain" level="10" operation="instant" />
+                <field field_ref="precip" level="10" />
+                <field field_ref="plul" level="10" />
+                <field field_ref="pluc" level="10" />
+                <field field_ref="snow" level="10" />
+                <field field_ref="evap" level="10" />
+                <field field_ref="evap_ter" level="10" />
+                <field field_ref="evap_lic" level="10" />
+                <field field_ref="evap_oce" level="10" />
+                <field field_ref="evap_sic" level="10" />
+                <field field_ref="msnow" level="10" />
+                <field field_ref="fsnow" level="10" />
+                <field field_ref="tops" level="10" />
+                <field field_ref="tops0" level="10" />
+                <field field_ref="topl" level="5" />
+                <field field_ref="topl0" level="10" />
+                <field field_ref="SWupTOA" level="10" />
+                <field field_ref="SWupTOAclr" level="10" />
+                <field field_ref="SWdnTOA" level="10" />
+                <field field_ref="SWdnTOAclr" level="10" />
+                <field field_ref="nettop" level="10" />
+                <field field_ref="SWup200" level="10" />
+                <field field_ref="SWup200clr" level="10" />
+                <field field_ref="SWdn200" level="10" />
+                <field field_ref="SWdn200clr" level="10" />
+                <field field_ref="LWup200" level="10" />
+                <field field_ref="LWup200clr" level="10" />
+                <field field_ref="LWdn200" level="10" />
+                <field field_ref="LWdn200clr" level="10" />
+                <field field_ref="sols" level="10" />
+                <field field_ref="sols0" level="10" />
+                <field field_ref="soll" level="10" />
+                <field field_ref="soll0" level="10" />
+                <field field_ref="radsol" level="10" />
+                <field field_ref="SWupSFC" level="10" />
+                <field field_ref="SWupSFCclr" level="10" />
+                <field field_ref="SWdnSFC" level="10" />
+                <field field_ref="SWdnSFCclr" level="10" />
+                <field field_ref="LWupSFC" level="10" />
+                <field field_ref="LWupSFCclr" level="10" />
+                <field field_ref="LWdnSFC" level="10" />
+                <field field_ref="LWdnSFCclr" level="10" />
+                <field field_ref="bils" level="5" />
+                <field field_ref="bils_tke" level="5" />
+                <field field_ref="bils_diss" level="5" />
+                <field field_ref="bils_ec" level="5" />
+                <field field_ref="bils_kinetic" level="5" />
+                <field field_ref="bils_enthalp" level="5" />
+                <field field_ref="bils_latent" level="5" />
+                <field field_ref="sens" level="10" />
+                <field field_ref="fder" level="10" />
+                <field field_ref="ffonte" level="10" />
+                <field field_ref="fqcalving" level="10" />
+                <field field_ref="fqfonte" level="10" />
+                <field field_ref="taux" level="10" />
+                <field field_ref="tauy" level="10" />
+                <field field_ref="taux_ter" level="10" />
+                <field field_ref="taux_lic" level="10" />
+                <field field_ref="taux_oce" level="10" />
+                <field field_ref="taux_sic" level="10" />
+                <field field_ref="tauy_ter" level="10" />
+                <field field_ref="tauy_lic" level="10" />
+                <field field_ref="tauy_oce" level="10" />
+                <field field_ref="tauy_sic" level="10" />
+                <field field_ref="pourc_ter" level="10" />
+                <field field_ref="pourc_lic" level="10" />
+                <field field_ref="pourc_oce" level="10" />
+                <field field_ref="pourc_sic" level="10" />
+                <field field_ref="fract_ter" level="10" />
+                <field field_ref="fract_lic" level="10" />
+                <field field_ref="fract_oce" level="10" />
+                <field field_ref="fract_sic" level="10" />
+                <field field_ref="tsol_ter" level="10" />
+                <field field_ref="tsol_lic" level="10" />
+                <field field_ref="tsol_oce" level="10" />
+                <field field_ref="tsol_sic" level="10" />
+                <field field_ref="evappot_ter" level="10" />
+                <field field_ref="evappot_lic" level="10" />
+                <field field_ref="evappot_oce" level="10" />
+                <field field_ref="evappot_sic" level="10" />
+                <field field_ref="sens_ter" level="7" />
+                <field field_ref="sens_lic" level="7" />
+                <field field_ref="sens_oce" level="7" />
+                <field field_ref="sens_sic" level="7" />
+                <field field_ref="lat_ter" level="7" />
+                <field field_ref="lat_lic" level="7" />
+                <field field_ref="lat_oce" level="7" />
+                <field field_ref="lat_sic" level="7" />
+                <field field_ref="flw_ter" level="10" />
+                <field field_ref="flw_lic" level="10" />
+                <field field_ref="flw_oce" level="10" />
+                <field field_ref="flw_sic" level="10" />
+                <field field_ref="fsw_ter" level="10" />
+                <field field_ref="fsw_lic" level="10" />
+                <field field_ref="fsw_oce" level="10" />
+                <field field_ref="fsw_sic" level="10" />
+                <field field_ref="wbils_ter" level="10" />
+                <field field_ref="wbils_lic" level="10" />
+                <field field_ref="wbils_oce" level="10" />
+                <field field_ref="wbils_sic" level="10" />
+                <field field_ref="wbilo_ter" level="10" />
+                <field field_ref="wbilo_lic" level="10" />
+                <field field_ref="wbilo_oce" level="10" />
+                <field field_ref="wbilo_sic" level="10" />
+                <field field_ref="cdrm" level="10" />
+                <field field_ref="cdrh" level="7" />
+                <field field_ref="cldl" level="10" />
+                <field field_ref="cldm" level="10" />
+                <field field_ref="cldh" level="10" />
+                <field field_ref="cldt" level="10" />
+                <field field_ref="cldq" level="10" />
+                <field field_ref="lwp" level="10" />
+                <field field_ref="iwp" level="10" />
+                <field field_ref="ue" level="10" />
+                <field field_ref="ve" level="10" />
+                <field field_ref="uq" level="10" />
+                <field field_ref="vq" level="10" />
+                <field field_ref="cape" level="10" />
+                <field field_ref="pbase" level="10" />
+                <field field_ref="ptop" level="10" />
+                <field field_ref="fbase" level="10" />
+                <field field_ref="plcl" level="10" />
+                <field field_ref="plfc" level="10" />
+                <field field_ref="wbeff" level="10" />
+                <field field_ref="prw" level="10" />
+                <field field_ref="s_pblh" level="10" />
+                <field field_ref="s_pblt" level="10" />
+                <field field_ref="s_lcl" level="10" />
+                <field field_ref="s_therm" level="10" />
+                <field field_ref="slab_bils_oce" level="10" />
+                <field field_ref="ale_bl" level="10" />
+                <field field_ref="alp_bl" level="10" />
+                <field field_ref="ale_wk" level="10" />
+                <field field_ref="alp_wk" level="10" />
+                <field field_ref="ale" level="10" />
+                <field field_ref="alp" level="10" />
+                <field field_ref="cin" level="10" />
+                <field field_ref="wape" level="10" />
+                <field field_ref="n2" level="6" />
+                <field field_ref="s2" level="6" />
+                <field field_ref="proba_notrig" level="6" />
+                <field field_ref="random_notrig" level="6" />
+                <field field_ref="ale_bl_stat" level="6" />
+                <field field_ref="ale_bl_trig" level="6" />
+                <field field_ref="alp_bl_det" level="10" />
+                <field field_ref="alp_bl_fluct_m" level="10" />
+                <field field_ref="alp_bl_fluct_tke" level="10" />
+                <field field_ref="alp_bl_conv" level="10" />
+                <field field_ref="alp_bl_stat" level="10" />
+
+                <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+                    <field field_ref="u850" level="10" />
+                    <field field_ref="u700" level="10" />
+                    <field field_ref="u500" level="10" />
+                    <field field_ref="u200" level="10" />
+                    <field field_ref="u100" level="10" />
+                    <field field_ref="u50" level="10" />
+                    <field field_ref="u10" level="10" />
+                    <field field_ref="v850" level="10" />
+                    <field field_ref="v700" level="10" />
+                    <field field_ref="v500" level="10" />
+                    <field field_ref="v200" level="10" />
+                    <field field_ref="v100" level="10" />
+                    <field field_ref="v50" level="10" />
+                    <field field_ref="v10" level="10" />
+                    <field field_ref="w850" level="10" />
+                    <field field_ref="w700" level="10" />
+                    <field field_ref="w500" level="10" />
+                    <field field_ref="w200" level="10" />
+                    <field field_ref="w100" level="10" />
+                    <field field_ref="w50" level="10" />
+                    <field field_ref="w10" level="10" />
+                    <field field_ref="t850" level="10" />
+                    <field field_ref="t700" level="10" />
+                    <field field_ref="t500" level="10" />
+                    <field field_ref="t200" level="10" />
+                    <field field_ref="t100" level="10" />
+                    <field field_ref="t50" level="10" />
+                    <field field_ref="t10" level="10" />
+                    <field field_ref="q850" level="10" />
+                    <field field_ref="q700" level="10" />
+                    <field field_ref="q500" level="10" />
+                    <field field_ref="q200" level="10" />
+                    <field field_ref="q100" level="10" />
+                    <field field_ref="q50" level="10" />
+                    <field field_ref="q10" level="10" />
+                    <field field_ref="z850" level="10" />
+                    <field field_ref="z700" level="10" />
+                    <field field_ref="z500" level="10" />
+                    <field field_ref="z200" level="10" />
+                    <field field_ref="z100" level="10" />
+                    <field field_ref="z50" level="10" />
+                    <field field_ref="z10" level="10" />
+                </field_group>
+
+                <field field_ref="t_oce_sic" level="10" />
+                <field field_ref="weakinv" level="10" />
+                <field field_ref="dthmin" level="10" />
+                <field field_ref="u10_ter" level="10" />
+                <field field_ref="u10_lic" level="10" />
+                <field field_ref="u10_oce" level="10" />
+                <field field_ref="u10_sic" level="10" />
+                <field field_ref="v10_ter" level="10" />
+                <field field_ref="v10_lic" level="10" />
+                <field field_ref="v10_oce" level="10" />
+                <field field_ref="v10_sic" level="10" />
+                <field field_ref="rh2m" level="10" />
+                <field field_ref="rh2m_min" level="10" operation="minimum" />
+                <field field_ref="rh2m_max" level="10" operation="maximum" />
+                <field field_ref="qsat2m" level="10" />
+                <field field_ref="tpot" level="10" />
+                <field field_ref="tpote" level="10" />
+                <field field_ref="tke" level="10" />
+                <field field_ref="tke_ter" level="10" />
+                <field field_ref="tke_lic" level="10" />
+                <field field_ref="tke_oce" level="10" />
+                <field field_ref="tke_sic" level="10" />
+                <field field_ref="tke_max_ter" level="10" operation="maximum" />
+                <field field_ref="tke_max_lic" level="10" operation="maximum" />
+                <field field_ref="tke_max_oce" level="10" operation="maximum" />
+                <field field_ref="tke_max_sic" level="10" operation="maximum" />
+                <field field_ref="SWnetOR" level="10" />
+                <field field_ref="SWdownOR" level="10" />
+                <field field_ref="LWdownOR" level="10" />
+                <field field_ref="snowl" level="10" />
+                <field field_ref="cape_max" level="10" operation="maximum" />
+                <field field_ref="solldown" level="10" />
+                <field field_ref="dtsvdfo" level="10" />
+                <field field_ref="dtsvdft" level="10" />
+                <field field_ref="dtsvdfg" level="10" />
+                <field field_ref="dtsvdfi" level="10" />
+                <field field_ref="rugs" level="10" />
+                <field field_ref="z0m" level="10" />
+                <field field_ref="z0h" level="10" />
+                <field field_ref="topswad" level="10" />
+                <field field_ref="topswad0" level="10" />
+                <field field_ref="topswai" level="10" />
+                <field field_ref="solswad" level="10" />
+                <field field_ref="solswad0" level="10" />
+                <field field_ref="solswai" level="10" />
+                <field field_ref="OD550_ASBCM" level="10" />
+                <field field_ref="OD550_ASPOMM" level="10" />
+                <field field_ref="OD550_ASSO4M" level="10" />
+                <field field_ref="OD550_CSSO4M" level="10" />
+                <field field_ref="OD550_SSSSM" level="10" />
+                <field field_ref="OD550_ASSSM" level="10" />
+                <field field_ref="OD550_CSSSM" level="10" />
+                <field field_ref="OD550_CIDUSTM" level="10" />
+                <field field_ref="OD550_AIBCM" level="10" />
+                <field field_ref="OD550_AIPOMM" level="10" />
+                <field field_ref="OD550_STRAT" level="10" />
+                <field field_ref="od550aer" level="10" />
+                <field field_ref="od865aer" level="10" />
+                <field field_ref="absvisaer" level="10" />
+                <field field_ref="od550lt1aer" level="10" />
+                <field field_ref="sconcso4" level="10" />
+                <field field_ref="sconcoa" level="10" />
+                <field field_ref="sconcbc" level="10" />
+                <field field_ref="sconcss" level="10" />
+                <field field_ref="sconcdust" level="10" />
+                <field field_ref="loadso4" level="10" />
+                <field field_ref="loadoa" level="10" />
+                <field field_ref="loadbc" level="10" />
+                <field field_ref="loadss" level="10" />
+                <field field_ref="loaddust" level="10" />
+                <field field_ref="swtoaas_nat" level="10" />
+                <field field_ref="swsrfas_nat" level="10" />
+                <field field_ref="swtoacs_nat" level="10" />
+                <field field_ref="swsrfcs_nat" level="10" />
+                <field field_ref="swtoaas_ant" level="10" />
+                <field field_ref="swsrfas_ant" level="10" />
+                <field field_ref="swtoacs_ant" level="10" />
+                <field field_ref="swsrfcs_ant" level="10" />
+                <field field_ref="swtoacf_nat" level="10" />
+                <field field_ref="swsrfcf_nat" level="10" />
+                <field field_ref="swtoacf_ant" level="10" />
+                <field field_ref="swsrfcf_ant" level="10" />
+                <field field_ref="swtoacf_zero" level="10" />
+                <field field_ref="swsrfcf_zero" level="10" />
+                <field field_ref="cldncl" level="10" />
+                <field field_ref="reffclwtop" level="10" />
+                <field field_ref="cldnvi" level="10" />
+                <field field_ref="lcc" level="10" />
+                <field field_ref="wvapp" level="10" />
+                <field field_ref="ozone_daylight" level="10" />
+                <field field_ref="albe_ter" level="7" />
+                <field field_ref="albe_lic" level="7" />
+                <field field_ref="albe_oce" level="7" />
+                <field field_ref="albe_sic" level="7" />
+                <field field_ref="ages_ter" level="10" />
+                <field field_ref="ages_lic" level="10" />
+                <field field_ref="ages_oce" level="10" />
+                <field field_ref="ages_sic" level="10" />
+                <field field_ref="snow_ter" level="10" />
+                <field field_ref="snow_lic" level="10" />
+                <field field_ref="snow_oce" level="10" />
+                <field field_ref="snow_sic" level="10" />
+                <field field_ref="rugs_ter" level="10" />
+                <field field_ref="rugs_lic" level="10" />
+                <field field_ref="rugs_oce" level="10" />
+                <field field_ref="rugs_sic" level="10" />
+                <field field_ref="z0m_ter" level="10" />
+                <field field_ref="z0m_lic" level="10" />
+                <field field_ref="z0m_oce" level="10" />
+                <field field_ref="z0m_sic" level="10" />
+                <field field_ref="z0h_ter" level="10" />
+                <field field_ref="z0h_lic" level="10" />
+                <field field_ref="z0h_oce" level="10" />
+                <field field_ref="z0h_sic" level="10" />
+                <field field_ref="alb1" level="10" />
+                <field field_ref="alb2" level="10" />
+                <field field_ref="ftime_con" level="10" operation="instant" />
+                <field field_ref="wake_h" level="10" />
+                <field field_ref="wake_s" level="10" />
+                <field field_ref="plulth" level="10" />
+                <field field_ref="plulst" level="10" />
+                <field field_ref="lmaxth" level="10" />
+                <field field_ref="ftime_th" level="10" />
+                <field field_ref="f0_th" level="10" />
+                <field field_ref="zmax_th" level="5" />
+                <field field_ref="rsut4co2" level="10" />
+                <field field_ref="rlut4co2" level="10" />
+                <field field_ref="rsutcs4co2" level="10" />
+                <field field_ref="rlutcs4co2" level="10" />
+            </field_group>
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" axis_ref="presnivs">
+                <field field_ref="cldtau" level="10" />
+                <field field_ref="cldemi" level="10" />
+                <field field_ref="tke_max" level="10" operation="maximum" />
+                <field field_ref="kz" level="10" />
+                <field field_ref="kz_max" level="10" operation="maximum" />
+                <field field_ref="concso4" level="10" />
+                <field field_ref="concoa" level="10" />
+                <field field_ref="concbc" level="10" />
+                <field field_ref="concss" level="10" />
+                <field field_ref="concdust" level="10" />
+                <field field_ref="ec550aer" level="10" />
+                <field field_ref="lwcon" level="10" />
+                <field field_ref="iwcon" level="10" />
+                <field field_ref="temp" level="10" />
+                <field field_ref="theta" level="10" />
+                <field field_ref="ovap" level="10" />
+                <field field_ref="ovapinit" level="10" />
+                <field field_ref="oliq" level="10" />
+                <field field_ref="geop" level="10" />
+                <field field_ref="vitu" level="6" />
+                <field field_ref="vitv" level="6" />
+                <field field_ref="vitw" level="6" />
+                <field field_ref="pres" level="10" />
+                <field field_ref="paprs" level="10" />
+                <field field_ref="mass" level="10" />
+                <field field_ref="zfull" level="10" />
+                <field field_ref="zhalf" level="10" />
+                <field field_ref="rneb" level="10" />
+                <field field_ref="rnebcon" level="10" />
+                <field field_ref="rnebls" level="10" />
+                <field field_ref="rhum" level="10" />
+                <field field_ref="ozone" level="10" />
+                <field field_ref="upwd" level="10" />
+                <field field_ref="dtphy" level="10" />
+                <field field_ref="dqphy" level="10" />
+                <field field_ref="pr_con_l" level="10" />
+                <field field_ref="pr_con_i" level="10" />
+                <field field_ref="pr_lsc_l" level="10" />
+                <field field_ref="pr_lsc_i" level="10" />
+                <field field_ref="re" level="10" />
+                <field field_ref="fl" level="10" />
+                <field field_ref="scdnc" level="10" />
+                <field field_ref="reffclws" level="10" />
+                <field field_ref="reffclwc" level="10" />
+                <field field_ref="lcc3d" level="10" />
+                <field field_ref="lcc3dcon" level="10" />
+                <field field_ref="lcc3dstra" level="10" />
+                <field field_ref="clwcon" level="10" />
+                <field field_ref="Ma" level="10" />
+                <field field_ref="dnwd" level="10" />
+                <field field_ref="dnwd0" level="10" />
+                <field field_ref="mc" level="10" />
+                <field field_ref="dtdyn" level="10" />
+                <field field_ref="dqdyn" level="10" />
+                <field field_ref="dudyn" level="10" />
+                <field field_ref="dvdyn" level="10" />
+                <field field_ref="dtcon" level="10" />
+                <field field_ref="ducon" level="10" />
+                <field field_ref="dvcon" level="10" />
+                <field field_ref="dqcon" level="10" />
+                <field field_ref="dtwak" level="10" />
+                <field field_ref="dqwak" level="10" />
+                <field field_ref="wake_deltat" level="10" />
+                <field field_ref="wake_deltaq" level="10" />
+                <field field_ref="wake_omg" level="10" />
+                <field field_ref="wdtrainA" level="4" />
+                <field field_ref="wdtrainM" level="4" />
+                <field field_ref="Vprecip" level="10" />
+                <field field_ref="ftd" level="10" />
+                <field field_ref="fqd" level="10" />
+                <field field_ref="dtlsc" level="10" />
+                <field field_ref="dtlschr" level="10" />
+                <field field_ref="dqlsc" level="10" />
+                <field field_ref="beta_prec" level="10" />
+                <field field_ref="dtvdf" level="10" />
+                <field field_ref="dtdis" level="10" />
+                <field field_ref="dqvdf" level="10" />
+                <field field_ref="dteva" level="10" />
+                <field field_ref="dqeva" level="10" />
+                <field field_ref="dqlscth" level="10" />
+                <field field_ref="dqlscst" level="10" />
+                <field field_ref="dtlscth" level="10" />
+                <field field_ref="dtlscst" level="10" />
+                <field field_ref="ptconvth" level="10" />
+                <field field_ref="ptconv" level="10" />
+                <field field_ref="ratqs" level="10" />
+                <field field_ref="dtthe" level="10" />
+                <field field_ref="f_th" level="10" />
+                <field field_ref="e_th" level="10" />
+                <field field_ref="w_th" level="10" />
+                <field field_ref="lambda_th" level="10" />
+                <field field_ref="q_th" level="10" />
+                <field field_ref="a_th" level="10" />
+                <field field_ref="d_th" level="10" />
+                <field field_ref="dqthe" level="10" />
+                <field field_ref="dtajs" level="10" />
+                <field field_ref="dqajs" level="10" />
+                <field field_ref="dtswr" level="10" />
+                <field field_ref="dtsw0" level="10" />
+                <field field_ref="dtlwr" level="10" />
+                <field field_ref="dtlw0" level="10" />
+                <field field_ref="dtec" level="10" />
+                <field field_ref="duvdf" level="10" />
+                <field field_ref="dvvdf" level="10" />
+                <field field_ref="duoro" level="10" />
+                <field field_ref="dvoro" level="10" />
+                <field field_ref="dulif" level="10" />
+                <field field_ref="dvlif" level="10" />
+                <field field_ref="dtoro" level="10" />
+                <field field_ref="dtlif" level="10" />
+                <field field_ref="dthin" level="10" />
+                <field field_ref="rsu" level="10" />
+                <field field_ref="rsd" level="10" />
+                <field field_ref="rlu" level="10" />
+                <field field_ref="rld" level="10" />
+                <field field_ref="rsucs" level="10" />
+                <field field_ref="rsdcs" level="10" />
+                <field field_ref="rlucs" level="10" />
+                <field field_ref="rldcs" level="10" />
+                <field field_ref="tnt" level="10" />
+                <field field_ref="tntc" level="10" />
+                <field field_ref="tntr" level="10" />
+                <field field_ref="tntscpbl" level="10" />
+                <field field_ref="tnhus" level="10" />
+                <field field_ref="tnhusc" level="10" />
+                <field field_ref="tnhusscpbl" level="10" />
+                <field field_ref="evu" level="10" />
+                <field field_ref="h2o" level="10" />
+                <field field_ref="mcd" level="10" />
+                <field field_ref="dmc" level="10" />
+                <field field_ref="ref_liq" level="10" />
+                <field field_ref="ref_ice" level="10" />
+                <field field_ref="rsu4co2" level="10" />
+                <field field_ref="rlu4co2" level="10" />
+                <field field_ref="rsucs4co2" level="10" />
+                <field field_ref="rlucs4co2" level="10" />
+                <field field_ref="rsd4co2" level="10" />
+                <field field_ref="rld4co2" level="10" />
+                <field field_ref="rsdcs4co2" level="10" />
+                <field field_ref="rldcs4co2" level="10" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histins_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histins_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histins_lmdz.xml	(revision 5893)
@@ -0,0 +1,531 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histins" name="Xhistins" output_freq="1ts" output_level="4" enabled=".FALSE.">
+            
+            <!-- VARS 1D -->
+<!--            <field_group operation="once">    -->
+<!--              <field field_ref="Ap" level="1" />    -->
+<!--              <field field_ref="Bp" level="1" />    -->
+<!--              <field field_ref="Alt" level="1" />    -->
+<!--            </field_group>    -->
+        
+            <!-- VARS 2D -->
+            <field_group operation="instant" freq_op="1ts">
+                <field field_ref="phis" level="10" />
+                <field field_ref="aire" level="10" operation="once" />
+                <field field_ref="contfracATM" level="1" operation="once" />
+                <field field_ref="contfracOR" level="1" />
+                <field field_ref="aireTER" level="1" />
+                <field field_ref="flat" level="10" />
+                <field field_ref="slp" level="1" />
+                <field field_ref="tsol" level="1" />
+                <field field_ref="t2m" level="1" />
+                <field field_ref="t2m_min" level="10" operation="minimum" />
+                <field field_ref="t2m_max" level="10" operation="maximum" />
+                <field field_ref="t2m_ter" level="10" />
+                <field field_ref="t2m_lic" level="10" />
+                <field field_ref="t2m_oce" level="10" />
+                <field field_ref="t2m_sic" level="10" />
+                <field field_ref="gusts" level="1" />
+                <field field_ref="wind10m" level="1" />
+                <field field_ref="wind10max" level="10" operation="maximum" />
+                <field field_ref="sicf" level="10" />
+                <field field_ref="q2m" level="1" />
+                <field field_ref="ustar" level="1" />
+                <field field_ref="u10m" level="1" />
+                <field field_ref="v10m" level="1" />
+                <field field_ref="psol" level="1" />
+                <field field_ref="qsurf" level="10" />
+                <field field_ref="ustar_ter" level="10" />
+                <field field_ref="ustar_lic" level="10" />
+                <field field_ref="ustar_oce" level="10" />
+                <field field_ref="ustar_sic" level="10" />
+                <field field_ref="wstar_ter" level="10" />
+                <field field_ref="wstar_lic" level="10" />
+                <field field_ref="wstar_oce" level="10" />
+                <field field_ref="wstar_sic" level="10" />
+                <field field_ref="wstar" level="10" />
+                <field field_ref="u10m_ter" level="10" />
+                <field field_ref="u10m_lic" level="10" />
+                <field field_ref="u10m_oce" level="10" />
+                <field field_ref="u10m_sic" level="10" />
+                <field field_ref="v10m_ter" level="10" />
+                <field field_ref="v10m_lic" level="10" />
+                <field field_ref="v10m_oce" level="10" />
+                <field field_ref="v10m_sic" level="10" />
+                <field field_ref="qsol" level="10" />
+                <field field_ref="ndayrain" level="10" operation="instant"  />
+                <field field_ref="precip" level="1" />
+                <field field_ref="plul" level="1" />
+                <field field_ref="pluc" level="1" />
+                <field field_ref="snow" level="10" />
+                <field field_ref="evap" level="10" />
+                <field field_ref="evap_ter" level="10" />
+                <field field_ref="evap_lic" level="10" />
+                <field field_ref="evap_oce" level="10" />
+                <field field_ref="evap_sic" level="10" />
+                <field field_ref="msnow" level="10" />
+                <field field_ref="fsnow" level="10" />
+                <field field_ref="tops" level="10" />
+                <field field_ref="tops0" level="10" />
+                <field field_ref="topl" level="10" />
+                <field field_ref="topl0" level="10" />
+                <field field_ref="SWupTOA" level="10" />
+                <field field_ref="SWupTOAclr" level="10" />
+                <field field_ref="SWdnTOA" level="10" />
+                <field field_ref="SWdnTOAclr" level="10" />
+                <field field_ref="nettop" level="10" />
+                <field field_ref="SWup200" level="10" />
+                <field field_ref="SWup200clr" level="10" />
+                <field field_ref="SWdn200" level="10" />
+                <field field_ref="SWdn200clr" level="10" />
+                <field field_ref="LWup200" level="10" />
+                <field field_ref="LWup200clr" level="10" />
+                <field field_ref="LWdn200" level="10" />
+                <field field_ref="LWdn200clr" level="10" />
+                <field field_ref="sols" level="10" />
+                <field field_ref="sols0" level="10" />
+                <field field_ref="soll" level="10" />
+                <field field_ref="soll0" level="10" />
+                <field field_ref="radsol" level="10" />
+                <field field_ref="SWupSFC" level="10" />
+                <field field_ref="SWupSFCclr" level="10" />
+                <field field_ref="SWdnSFC" level="10" />
+                <field field_ref="SWdnSFCclr" level="10" />
+                <field field_ref="LWupSFC" level="10" />
+                <field field_ref="LWupSFCclr" level="10" />
+                <field field_ref="LWdnSFC" level="10" />
+                <field field_ref="LWdnSFCclr" level="10" />
+                <field field_ref="bils" level="10" />
+                <field field_ref="bils_tke" level="10" />
+                <field field_ref="bils_diss" level="10" />
+                <field field_ref="bils_ec" level="10" />
+                <field field_ref="bils_kinetic" level="10" />
+                <field field_ref="bils_enthalp" level="10" />
+                <field field_ref="bils_latent" level="10" />
+                <field field_ref="sens" level="10" />
+                <field field_ref="fder" level="10" />
+                <field field_ref="ffonte" level="10" />
+                <field field_ref="fqcalving" level="10" />
+                <field field_ref="fqfonte" level="10" />
+                <field field_ref="taux" level="10" />
+                <field field_ref="tauy" level="10" />
+                <field field_ref="taux_ter" level="10" />
+                <field field_ref="taux_lic" level="10" />
+                <field field_ref="taux_oce" level="10" />
+                <field field_ref="taux_sic" level="10" />
+                <field field_ref="tauy_ter" level="10" />
+                <field field_ref="tauy_lic" level="10" />
+                <field field_ref="tauy_oce" level="10" />
+                <field field_ref="tauy_sic" level="10" />
+                <field field_ref="pourc_ter" level="10" />
+                <field field_ref="pourc_lic" level="10" />
+                <field field_ref="pourc_oce" level="10" />
+                <field field_ref="pourc_sic" level="10" />
+                <field field_ref="fract_ter" level="10" />
+                <field field_ref="fract_lic" level="10" />
+                <field field_ref="fract_oce" level="10" />
+                <field field_ref="fract_sic" level="10" />
+                <field field_ref="tsol_ter" level="10" />
+                <field field_ref="tsol_lic" level="10" />
+                <field field_ref="tsol_oce" level="10" />
+                <field field_ref="tsol_sic" level="10" />
+                <field field_ref="evappot_ter" level="10" />
+                <field field_ref="evappot_lic" level="10" />
+                <field field_ref="evappot_oce" level="10" />
+                <field field_ref="evappot_sic" level="10" />
+                <field field_ref="sens_ter" level="10" />
+                <field field_ref="sens_lic" level="10" />
+                <field field_ref="sens_oce" level="10" />
+                <field field_ref="sens_sic" level="10" />
+                <field field_ref="lat_ter" level="10" />
+                <field field_ref="lat_lic" level="10" />
+                <field field_ref="lat_oce" level="10" />
+                <field field_ref="lat_sic" level="10" />
+                <field field_ref="flw_ter" level="10" />
+                <field field_ref="flw_lic" level="10" />
+                <field field_ref="flw_oce" level="10" />
+                <field field_ref="flw_sic" level="10" />
+                <field field_ref="fsw_ter" level="10" />
+                <field field_ref="fsw_lic" level="10" />
+                <field field_ref="fsw_oce" level="10" />
+                <field field_ref="fsw_sic" level="10" />
+                <field field_ref="wbils_ter" level="10" />
+                <field field_ref="wbils_lic" level="10" />
+                <field field_ref="wbils_oce" level="10" />
+                <field field_ref="wbils_sic" level="10" />
+                <field field_ref="wbilo_ter" level="10" />
+                <field field_ref="wbilo_lic" level="10" />
+                <field field_ref="wbilo_oce" level="10" />
+                <field field_ref="wbilo_sic" level="10" />
+                <field field_ref="cdrm" level="10" />
+                <field field_ref="cdrh" level="10" />
+                <field field_ref="cldl" level="10" />
+                <field field_ref="cldm" level="10" />
+                <field field_ref="cldh" level="10" />
+                <field field_ref="cldt" level="2" />
+                <field field_ref="cldq" level="10" />
+                <field field_ref="lwp" level="10" />
+                <field field_ref="iwp" level="10" />
+                <field field_ref="ue" level="10" />
+                <field field_ref="ve" level="10" />
+                <field field_ref="uq" level="10" />
+                <field field_ref="vq" level="10" />
+                <field field_ref="cape" level="10" />
+                <field field_ref="pbase" level="10" />
+                <field field_ref="ptop" level="10" />
+                <field field_ref="fbase" level="10" />
+                <field field_ref="plcl" level="10" />
+                <field field_ref="plfc" level="10" />
+                <field field_ref="wbeff" level="10" />
+                <field field_ref="prw" level="10" />
+                <field field_ref="s_pblh" level="10" />
+                <field field_ref="s_pblt" level="10" />
+                <field field_ref="s_lcl" level="10" />
+                <field field_ref="s_therm" level="10" />
+                <field field_ref="slab_bils_oce" level="10" />
+                <field field_ref="ale_bl" level="1" />
+                <field field_ref="alp_bl" level="1" />
+                <field field_ref="ale_wk" level="1" />
+                <field field_ref="alp_wk" level="1" />
+                <field field_ref="ale" level="1" />
+                <field field_ref="alp" level="1" />
+                <field field_ref="cin" level="1" />
+                <field field_ref="wape" level="1" />
+                <field field_ref="n2" level="1" />
+                <field field_ref="s2" level="1" />
+                <field field_ref="proba_notrig" level="1" />
+                <field field_ref="random_notrig" level="1" />
+                <field field_ref="ale_bl_stat" level="1" />
+                <field field_ref="ale_bl_trig" level="1" />
+                <field field_ref="alp_bl_det" level="1" />
+                <field field_ref="alp_bl_fluct_m" level="1" />
+                <field field_ref="alp_bl_fluct_tke" level="1" />
+                <field field_ref="alp_bl_conv" level="1" />
+                <field field_ref="alp_bl_stat" level="1" />
+
+                <field_group operation="instant" freq_op="1ts" detect_missing_value=".true.">
+                    <field field_ref="u850" level="7" />
+                    <field field_ref="u700" level="7" />
+                    <field field_ref="u500" level="7" />
+                    <field field_ref="u200" level="7" />
+                    <field field_ref="u100" level="7" />
+                    <field field_ref="u50" level="7" />
+                    <field field_ref="u10" level="7" />
+                    <field field_ref="v850" level="7" />
+                    <field field_ref="v700" level="7" />
+                    <field field_ref="v500" level="7" />
+                    <field field_ref="v200" level="7" />
+                    <field field_ref="v100" level="7" />
+                    <field field_ref="v50" level="7" />
+                    <field field_ref="v10" level="7" />
+                    <field field_ref="w850" level="7" />
+                    <field field_ref="w700" level="7" />
+                    <field field_ref="w500" level="7" />
+                    <field field_ref="w200" level="7" />
+                    <field field_ref="w100" level="7" />
+                    <field field_ref="w50" level="7" />
+                    <field field_ref="w10" level="7" />
+                    <field field_ref="t850" level="7" />
+                    <field field_ref="t700" level="7" />
+                    <field field_ref="t500" level="7" />
+                    <field field_ref="t200" level="7" />
+                    <field field_ref="t100" level="7" />
+                    <field field_ref="t50" level="7" />
+                    <field field_ref="t10" level="7" />
+                    <field field_ref="q850" level="7" />
+                    <field field_ref="q700" level="7" />
+                    <field field_ref="q500" level="7" />
+                    <field field_ref="q200" level="7" />
+                    <field field_ref="q100" level="7" />
+                    <field field_ref="q50" level="7" />
+                    <field field_ref="q10" level="7" />
+                    <field field_ref="z850" level="7" />
+                    <field field_ref="z700" level="7" />
+                    <field field_ref="z500" level="7" />
+                    <field field_ref="z200" level="7" />
+                    <field field_ref="z100" level="7" />
+                    <field field_ref="z50" level="7" />
+                    <field field_ref="z10" level="7" />
+                </field_group>
+
+                <field field_ref="t_oce_sic" level="10" />
+                <field field_ref="weakinv" level="10" />
+                <field field_ref="dthmin" level="10" />
+                <field field_ref="u10_ter" level="10" />
+                <field field_ref="u10_lic" level="10" />
+                <field field_ref="u10_oce" level="10" />
+                <field field_ref="u10_sic" level="10" />
+                <field field_ref="v10_ter" level="10" />
+                <field field_ref="v10_lic" level="10" />
+                <field field_ref="v10_oce" level="10" />
+                <field field_ref="v10_sic" level="10" />
+                <field field_ref="rh2m" level="10" />
+                <field field_ref="rh2m_min" level="10" operation="minimum"  />
+                <field field_ref="rh2m_max" level="10" operation="maximum"  />
+                <field field_ref="qsat2m" level="10" />
+                <field field_ref="tpot" level="10" />
+                <field field_ref="tpote" level="10" />
+                <field field_ref="tke" level="10" />
+                <field field_ref="tke_ter" level="10" />
+                <field field_ref="tke_lic" level="10" />
+                <field field_ref="tke_oce" level="10" />
+                <field field_ref="tke_sic" level="10" />
+                <field field_ref="tke_max_ter" level="10" operation="maximum" />
+                <field field_ref="tke_max_lic" level="10" operation="maximum" />
+                <field field_ref="tke_max_oce" level="10" operation="maximum" />
+                <field field_ref="tke_max_sic" level="10" operation="maximum" />
+                <field field_ref="SWnetOR" level="2" />
+                <field field_ref="SWdownOR" level="2" />
+                <field field_ref="LWdownOR" level="2" />
+                <field field_ref="snowl" level="10" />
+                <field field_ref="cape_max" level="10" operation="maximum" />
+                <field field_ref="solldown" level="10" />
+                <field field_ref="dtsvdfo" level="10" />
+                <field field_ref="dtsvdft" level="10" />
+                <field field_ref="dtsvdfg" level="10" />
+                <field field_ref="dtsvdfi" level="10" />
+                <field field_ref="rugs" level="10" />
+                <field field_ref="z0m" level="10" />
+                <field field_ref="z0h" level="10" />
+                <field field_ref="topswad" level="10" />
+                <field field_ref="topswad0" level="10" />
+                <field field_ref="topswai" level="10" />
+                <field field_ref="solswad" level="10" />
+                <field field_ref="solswad0" level="10" />
+                <field field_ref="solswai" level="10" />
+                <field field_ref="OD550_ASBCM" level="10" />
+                <field field_ref="OD550_ASPOMM" level="10" />
+                <field field_ref="OD550_ASSO4M" level="10" />
+                <field field_ref="OD550_CSSO4M" level="10" />
+                <field field_ref="OD550_SSSSM" level="10" />
+                <field field_ref="OD550_ASSSM" level="10" />
+                <field field_ref="OD550_CSSSM" level="10" />
+                <field field_ref="OD550_CIDUSTM" level="10" />
+                <field field_ref="OD550_AIBCM" level="10" />
+                <field field_ref="OD550_AIPOMM" level="10" />
+                <field field_ref="OD550_STRAT" level="10" />
+                <field field_ref="od550aer" level="10" />
+                <field field_ref="od865aer" level="10" />
+                <field field_ref="absvisaer" level="10" />
+                <field field_ref="od550lt1aer" level="10" />
+                <field field_ref="sconcso4" level="10" />
+                <field field_ref="sconcoa" level="10" />
+                <field field_ref="sconcbc" level="10" />
+                <field field_ref="sconcss" level="10" />
+                <field field_ref="sconcdust" level="10" />
+                <field field_ref="loadso4" level="10" />
+                <field field_ref="loadoa" level="10" />
+                <field field_ref="loadbc" level="10" />
+                <field field_ref="loadss" level="10" />
+                <field field_ref="loaddust" level="10" />
+                <field field_ref="swtoaas_nat" level="10" />
+                <field field_ref="swsrfas_nat" level="10" />
+                <field field_ref="swtoacs_nat" level="10" />
+                <field field_ref="swsrfcs_nat" level="10" />
+                <field field_ref="swtoaas_ant" level="10" />
+                <field field_ref="swsrfas_ant" level="10" />
+                <field field_ref="swtoacs_ant" level="10" />
+                <field field_ref="swsrfcs_ant" level="10" />
+                <field field_ref="swtoacf_nat" level="10" />
+                <field field_ref="swsrfcf_nat" level="10" />
+                <field field_ref="swtoacf_ant" level="10" />
+                <field field_ref="swsrfcf_ant" level="10" />
+                <field field_ref="swtoacf_zero" level="10" />
+                <field field_ref="swsrfcf_zero" level="10" />
+                <field field_ref="cldncl" level="10" />
+                <field field_ref="reffclwtop" level="10" />
+                <field field_ref="cldnvi" level="10" />
+                <field field_ref="lcc" level="10" />
+                <field field_ref="wvapp" level="10" />
+                <field field_ref="ozone_daylight" level="10" />
+                <field field_ref="albe_ter" level="10" />
+                <field field_ref="albe_lic" level="10" />
+                <field field_ref="albe_oce" level="10" />
+                <field field_ref="albe_sic" level="10" />
+                <field field_ref="ages_ter" level="10" />
+                <field field_ref="ages_lic" level="10" />
+                <field field_ref="ages_oce" level="10" />
+                <field field_ref="ages_sic" level="10" />
+                <field field_ref="snow_ter" level="10" />
+                <field field_ref="snow_lic" level="10" />
+                <field field_ref="snow_oce" level="10" />
+                <field field_ref="snow_sic" level="10" />
+                <field field_ref="rugs_ter" level="10" />
+                <field field_ref="rugs_lic" level="10" />
+                <field field_ref="rugs_oce" level="10" />
+                <field field_ref="rugs_sic" level="10" />
+                <field field_ref="z0m_ter" level="10" />
+                <field field_ref="z0m_lic" level="10" />
+                <field field_ref="z0m_oce" level="10" />
+                <field field_ref="z0m_sic" level="10" />
+                <field field_ref="z0h_ter" level="10" />
+                <field field_ref="z0h_lic" level="10" />
+                <field field_ref="z0h_oce" level="10" />
+                <field field_ref="z0h_sic" level="10" />
+                <field field_ref="alb1" level="10" />
+                <field field_ref="alb2" level="10" />
+                <field field_ref="ftime_con" level="10" operation="instant" />
+                <field field_ref="wake_h" level="10" />
+                <field field_ref="wake_s" level="10" />
+                <field field_ref="plulth" level="10" />
+                <field field_ref="plulst" level="10" />
+                <field field_ref="lmaxth" level="10" />
+                <field field_ref="ftime_th" level="10" />
+                <field field_ref="f0_th" level="10" />
+                <field field_ref="zmax_th" level="4" />
+                <field field_ref="rsut4co2" level="10" />
+                <field field_ref="rlut4co2" level="10" />
+                <field field_ref="rsutcs4co2" level="10" />
+                <field field_ref="rlutcs4co2" level="10" />
+            </field_group>
+
+            <!-- VARS 3D -->
+            <field_group operation="instant" freq_op="1ts" axis_ref="presnivs">
+                <field field_ref="cldtau" level="10" />
+                <field field_ref="cldemi" level="10" />
+                <field field_ref="tke_max" level="10" operation="maximum" />
+                <field field_ref="kz" level="10" />
+                <field field_ref="kz_max" level="10" operation="maximum" />
+                <field field_ref="concso4" level="10" />
+                <field field_ref="concoa" level="10" />
+                <field field_ref="concbc" level="10" />
+                <field field_ref="concss" level="10" />
+                <field field_ref="concdust" level="10" />
+                <field field_ref="ec550aer" level="10" />
+                <field field_ref="lwcon" level="10" />
+                <field field_ref="iwcon" level="10" />
+                <field field_ref="temp" level="4" />
+                <field field_ref="theta" level="4" />
+                <field field_ref="ovap" level="4" />
+                <field field_ref="ovapinit" level="10" />
+                <field field_ref="oliq" level="4" />
+                <field field_ref="geop" level="10" />
+                <field field_ref="vitu" level="4" />
+                <field field_ref="vitv" level="4" />
+                <field field_ref="vitw" level="10" />
+                <field field_ref="pres" level="10" />
+                <field field_ref="paprs" level="10" />
+                <field field_ref="mass" level="10" />
+                <field field_ref="zfull" level="10" />
+                <field field_ref="zhalf" level="10" />
+                <field field_ref="rneb" level="10" />
+                <field field_ref="rnebcon" level="10" />
+                <field field_ref="rnebls" level="10" />
+                <field field_ref="rhum" level="10" />
+                <field field_ref="ozone" level="10" />
+                <field field_ref="upwd" level="10" />
+                <field field_ref="dtphy" level="10" />
+                <field field_ref="dqphy" level="10" />
+                <field field_ref="pr_con_l" level="10" />
+                <field field_ref="pr_con_i" level="10" />
+                <field field_ref="pr_lsc_l" level="10" />
+                <field field_ref="pr_lsc_i" level="10" />
+                <field field_ref="re" level="10" />
+                <field field_ref="fl" level="10" />
+                <field field_ref="scdnc" level="10" />
+                <field field_ref="reffclws" level="10" />
+                <field field_ref="reffclwc" level="10" />
+                <field field_ref="lcc3d" level="10" />
+                <field field_ref="lcc3dcon" level="10" />
+                <field field_ref="lcc3dstra" level="10" />
+                <field field_ref="clwcon" level="10" />
+                <field field_ref="Ma" level="10" />
+                <field field_ref="dnwd" level="10" />
+                <field field_ref="dnwd0" level="10" />
+                <field field_ref="mc" level="10" />
+                <field field_ref="dtdyn" level="10" />
+                <field field_ref="dqdyn" level="10" />
+                <field field_ref="dudyn" level="10" />
+                <field field_ref="dvdyn" level="10" />
+                <field field_ref="dtcon" level="10" />
+                <field field_ref="ducon" level="10" />
+                <field field_ref="dvcon" level="10" />
+                <field field_ref="dqcon" level="10" />
+                <field field_ref="dtwak" level="10" />
+                <field field_ref="dqwak" level="10" />
+                <field field_ref="wake_deltat" level="10" />
+                <field field_ref="wake_deltaq" level="10" />
+                <field field_ref="wake_omg" level="10" />
+                <field field_ref="wdtrainA" level="4" />
+                <field field_ref="wdtrainM" level="4" />
+                <field field_ref="Vprecip" level="10" />
+                <field field_ref="ftd" level="10" />
+                <field field_ref="fqd" level="10" />
+                <field field_ref="dtlsc" level="10" />
+                <field field_ref="dtlschr" level="10" />
+                <field field_ref="dqlsc" level="10" />
+                <field field_ref="beta_prec" level="10" />
+                <field field_ref="dtvdf" level="10" />
+                <field field_ref="dtdis" level="10" />
+                <field field_ref="dqvdf" level="10" />
+                <field field_ref="dteva" level="10" />
+                <field field_ref="dqeva" level="10" />
+                <field field_ref="dqlscth" level="10" />
+                <field field_ref="dqlscst" level="10" />
+                <field field_ref="dtlscth" level="10" />
+                <field field_ref="dtlscst" level="10" />
+                <field field_ref="ptconvth" level="10" />
+                <field field_ref="ptconv" level="10" />
+                <field field_ref="ratqs" level="10" />
+                <field field_ref="dtthe" level="10" />
+                <field field_ref="f_th" level="10" />
+                <field field_ref="e_th" level="10" />
+                <field field_ref="w_th" level="10" />
+                <field field_ref="lambda_th" level="10" />
+                <field field_ref="q_th" level="10" />
+                <field field_ref="a_th" level="10" />
+                <field field_ref="d_th" level="10" />
+                <field field_ref="dqthe" level="10" />
+                <field field_ref="dtajs" level="10" />
+                <field field_ref="dqajs" level="10" />
+                <field field_ref="dtswr" level="10" />
+                <field field_ref="dtsw0" level="10" />
+                <field field_ref="dtlwr" level="10" />
+                <field field_ref="dtlw0" level="10" />
+                <field field_ref="dtec" level="10" />
+                <field field_ref="duvdf" level="10" />
+                <field field_ref="dvvdf" level="10" />
+                <field field_ref="duoro" level="10" />
+                <field field_ref="dvoro" level="10" />
+                <field field_ref="dulif" level="10" />
+                <field field_ref="dvlif" level="10" />
+                <field field_ref="dtoro" level="10" />
+                <field field_ref="dtlif" level="10" />
+                <field field_ref="dthin" level="10" />
+                <field field_ref="rsu" level="10" />
+                <field field_ref="rsd" level="10" />
+                <field field_ref="rlu" level="10" />
+                <field field_ref="rld" level="10" />
+                <field field_ref="rsucs" level="10" />
+                <field field_ref="rsdcs" level="10" />
+                <field field_ref="rlucs" level="10" />
+                <field field_ref="rldcs" level="10" />
+                <field field_ref="tnt" level="10" />
+                <field field_ref="tntc" level="10" />
+                <field field_ref="tntr" level="10" />
+                <field field_ref="tntscpbl" level="10" />
+                <field field_ref="tnhus" level="10" />
+                <field field_ref="tnhusc" level="10" />
+                <field field_ref="tnhusscpbl" level="10" />
+                <field field_ref="evu" level="10" />
+                <field field_ref="h2o" level="10" />
+                <field field_ref="mcd" level="10" />
+                <field field_ref="dmc" level="10" />
+                <field field_ref="ref_liq" level="10" />
+                <field field_ref="ref_ice" level="10" />
+                <field field_ref="rsu4co2" level="10" />
+                <field field_ref="rlu4co2" level="10" />
+                <field field_ref="rsucs4co2" level="10" />
+                <field field_ref="rlucs4co2" level="10" />
+                <field field_ref="rsd4co2" level="10" />
+                <field field_ref="rld4co2" level="10" />
+                <field field_ref="rsdcs4co2" level="10" />
+                <field field_ref="rldcs4co2" level="10" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmthCOSP_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmthCOSP_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmthCOSP_lmdz.xml	(revision 5893)
@@ -0,0 +1,147 @@
+<!-- This file corresponds to the LMDZ5 trunk rev 2448. It might not be compatible    -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+     <file_group id="defile">
+        <file id="histmthCOSP" name="histmthCOSP" output_freq="30d" output_level="1"  enabled="_AUTO_">
+
+            <!-- VARS Calipso and PARASOL -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="cllcalipso"         level="1" />
+                <field field_ref="clmcalipso"         level="1" />
+                <field field_ref="clhcalipso"         level="1" />
+                <field field_ref="cltcalipso"         level="1" />
+                <field field_ref="cllcalipsoice"         level="1" />
+                <field field_ref="clmcalipsoice"         level="1" />
+                <field field_ref="clhcalipsoice"         level="1" />
+                <field field_ref="cltcalipsoice"         level="1" />
+                <field field_ref="cllcalipsoliq"         level="1" />
+                <field field_ref="clmcalipsoliq"         level="1" />
+                <field field_ref="clhcalipsoliq"         level="1" />
+                <field field_ref="cltcalipsoliq"         level="1" />
+                <field field_ref="cllcalipsoun"         level="1" />
+                <field field_ref="clmcalipsoun"         level="1" />
+                <field field_ref="clhcalipsoun"         level="1" />
+                <field field_ref="cltcalipsoun"         level="1" />
+                <field field_ref="clcalipso"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoice"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoliq"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsoun"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmp"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpice"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpliq"  level="1" axis_ref="height" />
+                <field field_ref="clcalipsotmpun"  level="1" axis_ref="height" />
+                <field field_ref="parasol_refl"  level="1" axis_ref="sza" />
+                <field field_ref="parasol_crefl"  level="1" axis_ref="sza" />
+                <field field_ref="Ncrefl"  level="1" axis_ref="sza" />
+       		    <field field_ref="c01_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c02_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c03_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c04_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c05_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c06_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c07_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c08_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c09_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c10_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c11_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c12_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c13_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c14_cfad_lidarsr532"  level="10" axis_ref="height" />
+		        <field field_ref="c15_cfad_lidarsr532"  level="10" axis_ref="height" />
+                <field field_ref="c01_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c02_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c03_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c04_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c05_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c06_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c07_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c08_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c09_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c10_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c11_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c12_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c13_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c14_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c15_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c16_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c17_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c18_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c19_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="c20_atb532" level="10" axis_ref="height_mlev" />
+                <field field_ref="beta_mol532" level="10" axis_ref="height_mlev" />
+              </field_group>
+             <!-- VARS CLOUDSAT et/ou Calipso -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true."> 
+               <field field_ref="cltlidarradar"  level="1"/>
+               <field field_ref="clcalipso2"  level="1" axis_ref="height" />
+               <field field_ref="c01_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c02_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c03_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c04_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c05_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c06_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c07_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c08_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c09_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c10_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c11_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c12_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c13_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c14_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c15_cfadDbze94"  level="10" axis_ref="height" />
+               <field field_ref="c01_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c02_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c03_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c04_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c05_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c06_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c07_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c08_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c09_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c10_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c11_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c12_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c13_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c14_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c15_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c16_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c17_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c18_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c19_dbze94" level="10" axis_ref="height_mlev" />
+               <field field_ref="c20_dbze94" level="10" axis_ref="height_mlev" />
+              </field_group>
+             <!-- VARS ISCCP -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="sunlit" level="1" />
+                <field field_ref="c01_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c02_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c03_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c04_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c05_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c06_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="c07_clisccp2" level="1" axis_ref="pressure2" />
+                <field field_ref="boxtauisccp" level="10" axis_ref="column" />
+                <field field_ref="boxptopisccp" level="10" axis_ref="column" />
+                <field field_ref="tclisccp" level="1" />
+                <field field_ref="ctpisccp" level="1" />
+                <field field_ref="tauisccp" level="1" /> 
+                <field field_ref="albisccp" level="1" />
+                <field field_ref="meantbisccp" level="10" />
+                <field field_ref="meantbclrisccp" level="10" />
+             </field_group>
+             <!-- VARS MISR -->
+            <field_group operation="average" freq_op="3h" detect_missing_value=".true.">
+                <field field_ref="c01_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c02_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c03_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c04_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c05_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c06_clMISR" level="1" axis_ref="cth16" />
+                <field field_ref="c07_clMISR" level="1" axis_ref="cth16" />
+            </field_group>
+
+        </file>
+     </file_group>
+</file_definition>
+   
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmthNMC_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmthNMC_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmthNMC_lmdz.xml	(revision 5893)
@@ -0,0 +1,33 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histmthNMC" name="histmthNMC" output_freq="1mo" output_level="5" enabled="_AUTO_">
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+<!--            <field field_ref="tnondef" level="5" />  -->
+                <field field_ref="ta" level="1" />
+                <field field_ref="zg" level="5" />
+                <field field_ref="hus" level="5" />
+                <field field_ref="hur" level="5" />
+                <field field_ref="ua" level="5" />
+                <field field_ref="va" level="5" />
+                <field field_ref="wap" level="5" />
+<!--            <field field_ref="psbg" level="5" />  -->
+                <field field_ref="tro3" level="5" />
+                <field field_ref="tro3_daylight" level="5" />
+                <field field_ref="uv" level="6" />
+                <!-- <field field_ref="vq" level="6" /> -->
+                <field field_ref="vT" level="6" />
+                <field field_ref="wq" level="6" />
+                <field field_ref="vphi" level="6" />
+                <field field_ref="wT" level="6" />
+                <field field_ref="u2" level="6" />
+                <field field_ref="v2" level="6" />
+                <field field_ref="T2" level="6" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmth_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmth_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histmth_lmdz.xml	(revision 5893)
@@ -0,0 +1,533 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+        <file_group id="defile">
+        <file id="histmth" name="histmth" output_freq="1mo" output_level="5"  enabled="_AUTO_">
+
+            <!-- VARS 1D -->
+<!--            <field_group operation="once">  -->
+<!--              <field field_ref="Ap" level="1" />  -->
+<!--              <field field_ref="Bp" level="1" />  -->
+<!--              <field field_ref="Alt" level="1" />  -->
+<!--            </field_group>  -->
+        
+            <!-- VARS 2D -->
+            <field_group operation="average" freq_op="1ts">
+                <field field_ref="phis"         level="1" />
+                <field field_ref="aire"         level="1"   operation="once"/>
+                <field field_ref="contfracATM"  level="10"  operation="once"/>
+                <field field_ref="contfracOR"   level="10" />
+                <field field_ref="aireTER"      level="10" />
+                <field field_ref="flat"         level="5" />
+                <field field_ref="slp"          level="1" />
+                <field field_ref="tsol"         level="1" />
+                <field field_ref="t2m"          level="1" />
+                <field field_ref="t2m_min" level="1" operation="minimum" />
+                <field field_ref="t2m_max" level="1" operation="maximum" />
+                <field field_ref="t2m_ter" level="10" />
+                <field field_ref="t2m_lic" level="10" />
+                <field field_ref="t2m_oce" level="10" />
+                <field field_ref="t2m_sic" level="10" />
+                <field field_ref="gusts" level="1" />
+                <field field_ref="wind10m" level="1" />
+                <field field_ref="wind10max" level="10" operation="maximum" />
+                <field field_ref="sicf"      level="1" />
+                <field field_ref="q2m"       level="1" />
+                <field field_ref="ustar"     level="1" />
+                <field field_ref="u10m"      level="1" />
+                <field field_ref="v10m"      level="1" />
+                <field field_ref="psol"      level="1" />
+                <field field_ref="qsurf"     level="1" />
+                <field field_ref="ustar_ter" level="10" />
+                <field field_ref="ustar_lic" level="10" />
+                <field field_ref="ustar_oce" level="10" />
+                <field field_ref="ustar_sic" level="10" />
+                <field field_ref="wstar_ter" level="10" />
+                <field field_ref="wstar_lic" level="10" />
+                <field field_ref="wstar_oce" level="10" />
+                <field field_ref="wstar_sic" level="10" />
+                <field field_ref="wstar"    level="5" />
+                <field field_ref="u10m_ter" level="10" />
+                <field field_ref="u10m_lic" level="10" />
+                <field field_ref="u10m_oce" level="10" />
+                <field field_ref="u10m_sic" level="10" />
+                <field field_ref="v10m_ter" level="10" />
+                <field field_ref="v10m_lic" level="10" />
+                <field field_ref="v10m_oce" level="10" />
+                <field field_ref="v10m_sic" level="10" />
+                <field field_ref="qsol"     level="1" />
+                <field field_ref="ndayrain" level="1" operation="instant" />
+                <field field_ref="precip"   level="1" />
+                <field field_ref="plul"     level="1" />
+                <field field_ref="pluc"     level="1" />
+                <field field_ref="snow"     level="1" />
+                <field field_ref="evap"     level="1" />
+                <field field_ref="evap_ter" level="1" />
+                <field field_ref="evap_lic" level="1" />
+                <field field_ref="evap_oce" level="1" />
+                <field field_ref="evap_sic" level="1" />
+                <field field_ref="msnow"    level="1" />
+                <field field_ref="fsnow"    level="1" />
+                <field field_ref="tops"     level="1" />
+                <field field_ref="tops0"    level="1" />
+                <field field_ref="topl"     level="1" />
+                <field field_ref="topl0"    level="1" />
+                <field field_ref="SWupTOA"  level="1" />
+                <field field_ref="SWupTOAclr"   level="1" />
+                <field field_ref="SWdnTOA"      level="1" />
+                <field field_ref="SWdnTOAclr"   level="1" />
+                <field field_ref="nettop"       level="1" />
+                <field field_ref="SWup200"      level="1" />
+                <field field_ref="SWup200clr"   level="10" />
+                <field field_ref="SWdn200"      level="1" />
+                <field field_ref="SWdn200clr"   level="10" />
+                <field field_ref="LWup200"      level="1" />
+                <field field_ref="LWup200clr"   level="1" />
+                <field field_ref="LWdn200"      level="1" />
+                <field field_ref="LWdn200clr"   level="1" />
+                <field field_ref="sols"  level="1" />
+                <field field_ref="sols0" level="1" />
+                <field field_ref="soll" level="1" />
+                <field field_ref="soll0" level="1" />
+                <field field_ref="radsol" level="1" />
+                <field field_ref="SWupSFC" level="1" />
+                <field field_ref="SWupSFCclr" level="1" />
+                <field field_ref="SWdnSFC" level="1" />
+                <field field_ref="SWdnSFCclr" level="1" />
+                <field field_ref="LWupSFC" level="1" />
+                <field field_ref="LWupSFCclr" level="1" />
+                <field field_ref="LWdnSFC" level="1" />
+                <field field_ref="LWdnSFCclr" level="1" />
+                <field field_ref="bils" level="1" />
+                <field field_ref="bils_tke" level="1" />
+                <field field_ref="bils_diss" level="1" />
+                <field field_ref="bils_ec" level="1" />
+                <field field_ref="bils_kinetic" level="1" />
+                <field field_ref="bils_enthalp" level="1" />
+                <field field_ref="bils_latent" level="1" />
+                <field field_ref="sens" level="1" />
+                <field field_ref="fder" level="1" />
+                <field field_ref="ffonte" level="1" />
+                <field field_ref="fqcalving" level="1" />
+                <field field_ref="fqfonte" level="1" />
+                <field field_ref="taux" level="1" />
+                <field field_ref="tauy" level="1" />
+                <field field_ref="taux_ter" level="1" />
+                <field field_ref="taux_lic" level="1" />
+                <field field_ref="taux_oce" level="1" />
+                <field field_ref="taux_sic" level="1" />
+                <field field_ref="tauy_ter" level="1" />
+                <field field_ref="tauy_lic" level="1" />
+                <field field_ref="tauy_oce" level="1" />
+                <field field_ref="tauy_sic" level="1" />
+                <field field_ref="pourc_ter" level="1" />
+                <field field_ref="pourc_lic" level="1" />
+                <field field_ref="pourc_oce" level="1" />
+                <field field_ref="pourc_sic" level="1" />
+                <field field_ref="fract_ter" level="1" />
+                <field field_ref="fract_lic" level="1" />
+                <field field_ref="fract_oce" level="1" />
+                <field field_ref="fract_sic" level="1" />
+                <field field_ref="tsol_ter" level="1" />
+                <field field_ref="tsol_lic" level="1" />
+                <field field_ref="tsol_oce" level="1" />
+                <field field_ref="tsol_sic" level="1" />
+                <field field_ref="evappot_ter" level="1" />
+                <field field_ref="evappot_lic" level="4" />
+                <field field_ref="evappot_oce" level="4" />
+                <field field_ref="evappot_sic" level="4" />
+                <field field_ref="sens_ter" level="1" />
+                <field field_ref="sens_lic" level="1" />
+                <field field_ref="sens_oce" level="1" />
+                <field field_ref="sens_sic" level="1" />
+                <field field_ref="lat_ter" level="1" />
+                <field field_ref="lat_lic" level="1" />
+                <field field_ref="lat_oce" level="1" />
+                <field field_ref="lat_sic" level="1" />
+                <field field_ref="flw_ter" level="1" />
+                <field field_ref="flw_lic" level="1" />
+                <field field_ref="flw_oce" level="1" />
+                <field field_ref="flw_sic" level="1" />
+                <field field_ref="fsw_ter" level="1" />
+                <field field_ref="fsw_lic" level="1" />
+                <field field_ref="fsw_oce" level="1" />
+                <field field_ref="fsw_sic" level="1" />
+                <field field_ref="wbils_ter" level="1" />
+                <field field_ref="wbils_lic" level="1" />
+                <field field_ref="wbils_oce" level="1" />
+                <field field_ref="wbils_sic" level="1" />
+                <field field_ref="wbilo_ter" level="1" />
+                <field field_ref="wbilo_lic" level="1" />
+                <field field_ref="wbilo_oce" level="1" />
+                <field field_ref="wbilo_sic" level="1" />
+                <field field_ref="cdrm" level="1" />
+                <field field_ref="cdrh" level="1" />
+                <field field_ref="cldl" level="1" />
+                <field field_ref="cldm" level="1" />
+                <field field_ref="cldh" level="1" />
+                <field field_ref="cldt" level="1" />
+                <field field_ref="cldq" level="1" />
+                <field field_ref="lwp" level="1" />
+                <field field_ref="iwp" level="1" />
+                <field field_ref="ue" level="1" />
+                <field field_ref="ve" level="1" />
+                <field field_ref="uq" level="1" />
+                <field field_ref="vq" level="1" />
+                <field field_ref="cape" level="1" />
+                <field field_ref="pbase" level="1" />
+                <field field_ref="ptop" level="1" />
+                <field field_ref="fbase" level="1" />
+                <field field_ref="plcl" level="1" />
+                <field field_ref="plfc" level="1" />
+                <field field_ref="wbeff" level="1" />
+                <field field_ref="prw" level="1" />
+                <field field_ref="s_pblh" level="1" />
+                <field field_ref="s_pblt" level="1" />
+                <field field_ref="s_lcl" level="1" />
+                <field field_ref="s_therm" level="1" />
+                <field field_ref="slab_bils_oce" level="1" />
+                <field field_ref="ale_bl" level="1" />
+                <field field_ref="alp_bl" level="1" />
+                <field field_ref="ale_wk" level="1" />
+                <field field_ref="alp_wk" level="1" />
+                <field field_ref="ale" level="1" />
+                <field field_ref="alp" level="1" />
+                <field field_ref="cin" level="1" />
+                <field field_ref="wape" level="1" />
+                <field field_ref="n2" level="1" />
+                <field field_ref="s2" level="1" />
+                <field field_ref="proba_notrig" level="1" />
+                <field field_ref="random_notrig" level="1" />
+                <field field_ref="ale_bl_stat" level="1" />
+                <field field_ref="ale_bl_trig" level="1" />
+                <field field_ref="alp_bl_det" level="1" />
+                <field field_ref="alp_bl_fluct_m" level="1" />
+                <field field_ref="alp_bl_fluct_tke" level="1" />
+                <field field_ref="alp_bl_conv" level="1" />
+                <field field_ref="alp_bl_stat" level="1" />
+
+                <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+                    <field field_ref="u850" level="1" />
+                    <field field_ref="u700" level="1" />
+                    <field field_ref="u500" level="1" />
+                    <field field_ref="u200" level="1" />
+                    <field field_ref="u100" level="1" />
+                    <field field_ref="u50" level="1" />
+                    <field field_ref="u10" level="1" />
+                    <field field_ref="v850" level="1" />
+                    <field field_ref="v700" level="1" />
+                    <field field_ref="v500" level="1" />
+                    <field field_ref="v200" level="1" />
+                    <field field_ref="v100" level="1" />
+                    <field field_ref="v50" level="1" />
+                    <field field_ref="v10" level="1" />
+                    <field field_ref="w850" level="1" />
+                    <field field_ref="w700" level="1" />
+                    <field field_ref="w500" level="1" />
+                    <field field_ref="w200" level="1" />
+                    <field field_ref="w100" level="1" />
+                    <field field_ref="w50" level="1" />
+                    <field field_ref="w10" level="1" />
+                    <field field_ref="t850" level="1" />
+                    <field field_ref="t700" level="1" />
+                    <field field_ref="t500" level="1" />
+                    <field field_ref="t200" level="1" />
+                    <field field_ref="t100" level="1" />
+                    <field field_ref="t50" level="1" />
+                    <field field_ref="t10" level="1" />
+                    <field field_ref="q850" level="1" />
+                    <field field_ref="q700" level="1" />
+                    <field field_ref="q500" level="1" />
+                    <field field_ref="q200" level="1" />
+                    <field field_ref="q100" level="1" />
+                    <field field_ref="q50" level="1" />
+                    <field field_ref="q10" level="1" />
+                    <field field_ref="z850" level="1" />
+                    <field field_ref="z700" level="1" />
+                    <field field_ref="z500" level="1" />
+                    <field field_ref="z200" level="1" />
+                    <field field_ref="z100" level="1" />
+                    <field field_ref="z50" level="1" />
+                    <field field_ref="z10" level="1" />
+                </field_group>
+
+                <field field_ref="t_oce_sic" level="1" />
+                <field field_ref="weakinv" level="10" />
+                <field field_ref="dthmin" level="10" />
+                <field field_ref="u10_ter" level="10" />
+                <field field_ref="u10_lic" level="10" />
+                <field field_ref="u10_oce" level="10" />
+                <field field_ref="u10_sic" level="10" />
+                <field field_ref="v10_ter" level="10" />
+                <field field_ref="v10_lic" level="10" />
+                <field field_ref="v10_oce" level="10" />
+                <field field_ref="v10_sic" level="10" />
+                <field field_ref="rh2m" level="5" />
+                <field field_ref="rh2m_min" level="10" operation="minimum" />
+                <field field_ref="rh2m_max" level="10" operation="maximum" />
+                <field field_ref="qsat2m" level="10" />
+                <field field_ref="tpot" level="10" />
+                <field field_ref="tpote" level="10" />
+                <field field_ref="tke" level="4" />
+                <field field_ref="tke_ter" level="10" />
+                <field field_ref="tke_lic" level="10" />
+                <field field_ref="tke_oce" level="10" />
+                <field field_ref="tke_sic" level="10" />
+                <field field_ref="tke_max_ter" level="10" operation="maximum" />
+                <field field_ref="tke_max_lic" level="10" operation="maximum" />
+                <field field_ref="tke_max_oce" level="10" operation="maximum" />
+                <field field_ref="tke_max_sic" level="10" operation="maximum" />
+                <field field_ref="SWnetOR" level="10" />
+                <field field_ref="SWdownOR" level="10" />
+                <field field_ref="LWdownOR" level="10" />
+                <field field_ref="snowl" level="10" />
+                <field field_ref="cape_max" level="10" operation="maximum" />
+                <field field_ref="solldown" level="10" />
+                <field field_ref="dtsvdfo" level="10" />
+                <field field_ref="dtsvdft" level="10" />
+                <field field_ref="dtsvdfg" level="10" />
+                <field field_ref="dtsvdfi" level="10" />
+                <field field_ref="rugs" level="10" />
+                <field field_ref="z0m" level="10" />
+                <field field_ref="z0h" level="10" />
+                <field field_ref="topswad" level="2" />
+                <field field_ref="topswad0" level="2" />
+                <field field_ref="topswai" level="2" />
+                <field field_ref="solswad" level="2" />
+                <field field_ref="solswad0" level="2" />
+                <field field_ref="solswai" level="2" />
+                <field field_ref="OD550_ASBCM" level="2" />
+                <field field_ref="OD550_ASPOMM" level="2" />
+                <field field_ref="OD550_ASSO4M" level="2" />
+                <field field_ref="OD550_CSSO4M" level="2" />
+                <field field_ref="OD550_SSSSM" level="2" />
+                <field field_ref="OD550_ASSSM" level="2" />
+                <field field_ref="OD550_CSSSM" level="2" />
+                <field field_ref="OD550_CIDUSTM" level="2" />
+                <field field_ref="OD550_AIBCM" level="2" />
+                <field field_ref="OD550_AIPOMM" level="2" />
+                <field field_ref="OD550_STRAT" level="2" />
+                <field field_ref="od550aer" level="2" />
+                <field field_ref="od865aer" level="2" />
+                <field field_ref="absvisaer" level="2" />
+                <field field_ref="od550lt1aer" level="2" />
+                <field field_ref="sconcso4" level="2" />
+                <field field_ref="sconcoa" level="2" />
+                <field field_ref="sconcbc" level="2" />
+                <field field_ref="sconcss" level="2" />
+                <field field_ref="sconcdust" level="2" />
+                <field field_ref="loadso4" level="2" />
+                <field field_ref="loadoa" level="2" />
+                <field field_ref="loadbc" level="2" />
+                <field field_ref="loadss" level="2" />
+                <field field_ref="loaddust" level="2" />
+                <field field_ref="swtoaas_nat" level="4" />
+                <field field_ref="swsrfas_nat" level="4" />
+                <field field_ref="swtoacs_nat" level="4" />
+                <field field_ref="swsrfcs_nat" level="4" />
+                <field field_ref="swtoaas_ant" level="4" />
+                <field field_ref="swsrfas_ant" level="4" />
+                <field field_ref="swtoacs_ant" level="4" />
+                <field field_ref="swsrfcs_ant" level="4" />
+                <field field_ref="swtoacf_nat" level="4" />
+                <field field_ref="swsrfcf_nat" level="4" />
+                <field field_ref="swtoacf_ant" level="4" />
+                <field field_ref="swsrfcf_ant" level="4" />
+                <field field_ref="swtoacf_zero" level="4" />
+                <field field_ref="swsrfcf_zero" level="4" />
+                <field field_ref="cldncl" level="2" />
+                <field field_ref="reffclwtop" level="2" />
+                <field field_ref="cldnvi" level="2" />
+                <field field_ref="lcc" level="2" />
+                <field field_ref="wvapp" level="2" />
+                <field field_ref="ozone_daylight" level="2" />
+                <field field_ref="albe_ter" level="3" />
+                <field field_ref="albe_lic" level="3" />
+                <field field_ref="albe_oce" level="3" />
+                <field field_ref="albe_sic" level="3" />
+                <field field_ref="ages_ter" level="10" />
+                <field field_ref="ages_lic" level="3" />
+                <field field_ref="ages_oce" level="10" />
+                <field field_ref="ages_sic" level="3" />
+                <field field_ref="snow_ter" level="10" />
+                <field field_ref="snow_lic" level="3" />
+                <field field_ref="snow_oce" level="10" />
+                <field field_ref="snow_sic" level="3" />
+                <field field_ref="rugs_ter" level="3" />
+                <field field_ref="rugs_lic" level="3" />
+                <field field_ref="rugs_oce" level="3" />
+                <field field_ref="rugs_sic" level="3" />
+                <field field_ref="z0m_ter" level="3" />
+                <field field_ref="z0m_lic" level="3" />
+                <field field_ref="z0m_oce" level="3" />
+                <field field_ref="z0m_sic" level="3" />
+                <field field_ref="z0h_ter" level="3" />
+                <field field_ref="z0h_lic" level="3" />
+                <field field_ref="z0h_oce" level="3" />
+                <field field_ref="z0h_sic" level="3" />
+                <field field_ref="alb1" level="3" />
+                <field field_ref="alb2" level="3" />
+                <field field_ref="ftime_con" level="4" operation="instant" />
+                <field field_ref="wake_h" level="4" />
+                <field field_ref="wake_s" level="4" />
+                <field field_ref="plulth" level="10" />
+                <field field_ref="plulst" level="10" />
+                <field field_ref="lmaxth" level="10" />
+                <field field_ref="ftime_th" level="4" />
+                <field field_ref="f0_th" level="4" />
+                <field field_ref="zmax_th" level="4" />
+                <field field_ref="rsut4co2" level="5" />
+                <field field_ref="rlut4co2" level="5" />
+                <field field_ref="rsutcs4co2" level="5" />
+                <field field_ref="rlutcs4co2" level="5" />
+            </field_group>
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" axis_ref="presnivs">
+                <field field_ref="cldtau" level="10" />
+                <field field_ref="cldemi" level="10" />
+                <field field_ref="tke_max" level="4" operation="maximum" />
+                <field field_ref="kz" level="4" />
+                <field field_ref="kz_max" level="4" operation="maximum" />
+                <field field_ref="concso4" level="2" />
+                <field field_ref="concoa" level="2" />
+                <field field_ref="concbc" level="2" />
+                <field field_ref="concss" level="2" />
+                <field field_ref="concdust" level="2" />
+                <field field_ref="ec550aer" level="2" />
+                <field field_ref="lwcon" level="2" />
+                <field field_ref="iwcon" level="2" />
+                <field field_ref="temp" level="2" />
+                <field field_ref="theta" level="2" />
+                <field field_ref="ovap" level="2" />
+                <field field_ref="ovapinit" level="2" />
+                <field field_ref="oliq" level="2" />
+                <field field_ref="geop" level="2" />
+                <field field_ref="vitu" level="2" />
+                <field field_ref="vitv" level="2" />
+                <field field_ref="vitw" level="2" />
+                <field field_ref="pres" level="2" />
+                <field field_ref="paprs" level="2" />
+                <field field_ref="mass" level="2" />
+                <field field_ref="zfull" level="2" />
+                <field field_ref="zhalf" level="2" />
+                <field field_ref="rneb" level="2" />
+                <field field_ref="rnebcon" level="2" />
+                <field field_ref="rnebls" level="2" />
+                <field field_ref="rhum" level="2" />
+                <field field_ref="ozone" level="2" />
+                <field field_ref="upwd" level="2" />
+                <field field_ref="dtphy" level="2" />
+                <field field_ref="dqphy" level="2" />
+                <field field_ref="pr_con_l" level="2" />
+                <field field_ref="pr_con_i" level="2" />
+                <field field_ref="pr_lsc_l" level="2" />
+                <field field_ref="pr_lsc_i" level="2" />
+                <field field_ref="re" level="5" />
+                <field field_ref="fl" level="5" />
+                <field field_ref="scdnc" level="2" />
+                <field field_ref="reffclws" level="2" />
+                <field field_ref="reffclwc" level="2" />
+                <field field_ref="lcc3d" level="2" />
+                <field field_ref="lcc3dcon" level="2" />
+                <field field_ref="lcc3dstra" level="2" />
+                <field field_ref="clwcon" level="4" />
+                <field field_ref="Ma" level="4" />
+                <field field_ref="dnwd" level="4" />
+                <field field_ref="dnwd0" level="4" />
+                <field field_ref="mc" level="4" />
+                <field field_ref="dtdyn" level="4" />
+                <field field_ref="dqdyn" level="4" />
+                <field field_ref="dudyn" level="4" />
+                <field field_ref="dvdyn" level="4" />
+                <field field_ref="dtcon" level="4" />
+                <field field_ref="ducon" level="4" />
+                <field field_ref="dvcon" level="4" />
+                <field field_ref="dqcon" level="4" />
+                <field field_ref="dtwak" level="4" />
+                <field field_ref="dqwak" level="4" />
+                <field field_ref="wake_deltat" level="4" />
+                <field field_ref="wake_deltaq" level="4" />
+                <field field_ref="wake_omg" level="4" />
+                <field field_ref="wdtrainA" level="4" />
+                <field field_ref="wdtrainM" level="4" />
+                <field field_ref="Vprecip" level="10" />
+                <field field_ref="ftd" level="4" />
+                <field field_ref="fqd" level="4" />
+                <field field_ref="dtlsc" level="4" />
+                <field field_ref="dtlschr" level="4" />
+                <field field_ref="dqlsc" level="4" />
+                <field field_ref="beta_prec" level="4" />
+                <field field_ref="dtvdf" level="4" />
+                <field field_ref="dtdis" level="4" />
+                <field field_ref="dqvdf" level="4" />
+                <field field_ref="dteva" level="4" />
+                <field field_ref="dqeva" level="4" />
+                <field field_ref="dqlscth" level="10" />
+                <field field_ref="dqlscst" level="10" />
+                <field field_ref="dtlscth" level="10" />
+                <field field_ref="dtlscst" level="10" />
+                <field field_ref="ptconvth" level="10" />
+                <field field_ref="ptconv" level="4" />
+                <field field_ref="ratqs" level="4" />
+                <field field_ref="dtthe" level="4" />
+                <field field_ref="f_th" level="4" />
+                <field field_ref="e_th" level="4" />
+                <field field_ref="w_th" level="4" />
+                <field field_ref="lambda_th" level="10" />
+                <field field_ref="q_th" level="4" />
+                <field field_ref="a_th" level="4" />
+                <field field_ref="d_th" level="4" />
+                <field field_ref="dqthe" level="4" />
+                <field field_ref="dtajs" level="4" />
+                <field field_ref="dqajs" level="4" />
+                <field field_ref="dtswr" level="4" />
+                <field field_ref="dtsw0" level="4" />
+                <field field_ref="dtlwr" level="4" />
+                <field field_ref="dtlw0" level="4" />
+                <field field_ref="dtec"  level="4" />
+                <field field_ref="duvdf" level="4" />
+                <field field_ref="dvvdf" level="4" />
+                <field field_ref="duoro" level="4" />
+                <field field_ref="dvoro" level="4" />
+                <field field_ref="dulif" level="4" />
+                <field field_ref="dvlif" level="4" />
+                <field field_ref="dtoro" level="4" />
+                <field field_ref="dtlif" level="4" />
+                <field field_ref="dthin" level="4" />
+                <field field_ref="rsu" level="4" />
+                <field field_ref="rsd" level="4" />
+                <field field_ref="rlu" level="4" />
+                <field field_ref="rld" level="4" />
+                <field field_ref="rsucs" level="4" />
+                <field field_ref="rsdcs" level="4" />
+                <field field_ref="rlucs" level="4" />
+                <field field_ref="rldcs" level="4" />
+                <field field_ref="tnt"  level="4" />
+                <field field_ref="tntc" level="4" />
+                <field field_ref="tntr" level="4" />
+                <field field_ref="tntscpbl" level="4" />
+                <field field_ref="tnhus"    level="4" />
+                <field field_ref="tnhusc"   level="4" />
+                <field field_ref="tnhusscpbl" level="4" />
+                <field field_ref="evu" level="4" />
+                <field field_ref="h2o" level="4" />
+                <field field_ref="mcd" level="4" />
+                <field field_ref="dmc" level="4" />
+                <field field_ref="ref_liq" level="4" />
+                <field field_ref="ref_ice" level="4" />
+                <field field_ref="rsu4co2" level="5" />
+                <field field_ref="rlu4co2" level="5" />
+                <field field_ref="rsucs4co2" level="5" />
+                <field field_ref="rlucs4co2" level="5" />
+                <field field_ref="rsd4co2" level="5" />
+                <field field_ref="rld4co2" level="5" />
+                <field field_ref="rsdcs4co2" level="5" />
+                <field field_ref="rldcs4co2" level="5" />
+            </field_group>
+        </file>
+
+        </file_group>
+    </file_definition>
+   
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histstn_lmdz.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histstn_lmdz.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_histstn_lmdz.xml	(revision 5893)
@@ -0,0 +1,531 @@
+<!-- This file corresponds to the LMDZ5 testing rev 2314. It might not be compatible  -->
+<!-- with older or newer revisions of LMDZ source code.                               -->
+
+<file_definition>
+    <file_group id="defile">
+        <file id="histstn" name="histstn" output_freq="1800s" output_level="5" enabled="_AUTO_">
+
+            <!-- VARS 1D -->
+<!--            <field_group operation="once">  -->
+<!--              <field field_ref="Ap" level="1" />  -->
+<!--              <field field_ref="Bp" level="1" />  -->
+<!--              <field field_ref="Alt" level="1" />  -->
+<!--            </field_group>  -->
+        
+            <!-- VARS 2D -->
+            <field_group operation="average" freq_op="1ts">
+                <field field_ref="phis" level="1" />
+                <field field_ref="aire" level="1" operation="once" />
+                <field field_ref="contfracATM" level="10" operation="once" />
+                <field field_ref="contfracOR" level="10" />
+                <field field_ref="aireTER" level="10" />
+                <field field_ref="flat" level="10" />
+                <field field_ref="slp" level="10" />
+                <field field_ref="tsol" level="10" />
+                <field field_ref="t2m" level="10" />
+                <field field_ref="t2m_min" level="10" operation="minimum" />
+                <field field_ref="t2m_max" level="10" operation="maximum" />
+                <field field_ref="t2m_ter" level="10" />
+                <field field_ref="t2m_lic" level="10" />
+                <field field_ref="t2m_oce" level="10" />
+                <field field_ref="t2m_sic" level="10" />
+                <field field_ref="gusts" level="10" />
+                <field field_ref="wind10m" level="10" />
+                <field field_ref="wind10max" level="10" />
+                <field field_ref="sicf" level="10" />
+                <field field_ref="q2m" level="10" />
+                <field field_ref="ustar" level="10" />
+                <field field_ref="u10m" level="10" />
+                <field field_ref="v10m" level="10" />
+                <field field_ref="psol" level="10" />
+                <field field_ref="qsurf" level="10" />
+                <field field_ref="ustar_ter" level="10" />
+                <field field_ref="ustar_lic" level="10" />
+                <field field_ref="ustar_oce" level="10" />
+                <field field_ref="ustar_sic" level="10" />
+                <field field_ref="wstar_ter" level="10" />
+                <field field_ref="wstar_lic" level="10" />
+                <field field_ref="wstar_oce" level="10" />
+                <field field_ref="wstar_sic" level="10" />
+                <field field_ref="wstar" level="10" />
+                <field field_ref="u10m_ter" level="10" />
+                <field field_ref="u10m_lic" level="10" />
+                <field field_ref="u10m_oce" level="10" />
+                <field field_ref="u10m_sic" level="10" />
+                <field field_ref="v10m_ter" level="10" />
+                <field field_ref="v10m_lic" level="10" />
+                <field field_ref="v10m_oce" level="10" />
+                <field field_ref="v10m_sic" level="10" />
+                <field field_ref="qsol" level="10" />
+                <field field_ref="ndayrain" level="10" operation="instant" />
+                <field field_ref="precip" level="10" />
+                <field field_ref="plul" level="10" />
+                <field field_ref="pluc" level="10" />
+                <field field_ref="snow" level="10" />
+                <field field_ref="evap" level="10" />
+                <field field_ref="evap_ter" level="10" />
+                <field field_ref="evap_lic" level="10" />
+                <field field_ref="evap_oce" level="10" />
+                <field field_ref="evap_sic" level="10" />
+                <field field_ref="msnow" level="10" />
+                <field field_ref="fsnow" level="10" />
+                <field field_ref="tops" level="10" />
+                <field field_ref="tops0" level="10" />
+                <field field_ref="topl" level="10" />
+                <field field_ref="topl0" level="10" />
+                <field field_ref="SWupTOA" level="10" />
+                <field field_ref="SWupTOAclr" level="10" />
+                <field field_ref="SWdnTOA" level="10" />
+                <field field_ref="SWdnTOAclr" level="10" />
+                <field field_ref="nettop" level="10" />
+                <field field_ref="SWup200" level="10" />
+                <field field_ref="SWup200clr" level="10" />
+                <field field_ref="SWdn200" level="10" />
+                <field field_ref="SWdn200clr" level="10" />
+                <field field_ref="LWup200" level="10" />
+                <field field_ref="LWup200clr" level="10" />
+                <field field_ref="LWdn200" level="10" />
+                <field field_ref="LWdn200clr" level="10" />
+                <field field_ref="sols" level="10" />
+                <field field_ref="sols0" level="10" />
+                <field field_ref="soll" level="10" />
+                <field field_ref="soll0" level="10" />
+                <field field_ref="radsol" level="10" />
+                <field field_ref="SWupSFC" level="10" />
+                <field field_ref="SWupSFCclr" level="10" />
+                <field field_ref="SWdnSFC" level="10" />
+                <field field_ref="SWdnSFCclr" level="10" />
+                <field field_ref="LWupSFC" level="10" />
+                <field field_ref="LWupSFCclr" level="10" />
+                <field field_ref="LWdnSFC" level="10" />
+                <field field_ref="LWdnSFCclr" level="10" />
+                <field field_ref="bils" level="10" />
+                <field field_ref="bils_tke" level="10" />
+                <field field_ref="bils_diss" level="10" />
+                <field field_ref="bils_ec" level="10" />
+                <field field_ref="bils_kinetic" level="10" />
+                <field field_ref="bils_enthalp" level="10" />
+                <field field_ref="bils_latent" level="10" />
+                <field field_ref="sens" level="10" />
+                <field field_ref="fder" level="10" />
+                <field field_ref="ffonte" level="10" />
+                <field field_ref="fqcalving" level="10" />
+                <field field_ref="fqfonte" level="10" />
+                <field field_ref="taux" level="10" />
+                <field field_ref="tauy" level="10" />
+                <field field_ref="taux_ter" level="10" />
+                <field field_ref="taux_lic" level="10" />
+                <field field_ref="taux_oce" level="10" />
+                <field field_ref="taux_sic" level="10" />
+                <field field_ref="tauy_ter" level="10" />
+                <field field_ref="tauy_lic" level="10" />
+                <field field_ref="tauy_oce" level="10" />
+                <field field_ref="tauy_sic" level="10" />
+                <field field_ref="pourc_ter" level="10" />
+                <field field_ref="pourc_lic" level="10" />
+                <field field_ref="pourc_oce" level="10" />
+                <field field_ref="pourc_sic" level="10" />
+                <field field_ref="fract_ter" level="10" />
+                <field field_ref="fract_lic" level="10" />
+                <field field_ref="fract_oce" level="10" />
+                <field field_ref="fract_sic" level="10" />
+                <field field_ref="tsol_ter" level="10" />
+                <field field_ref="tsol_lic" level="10" />
+                <field field_ref="tsol_oce" level="10" />
+                <field field_ref="tsol_sic" level="10" />
+                <field field_ref="evappot_ter" level="10" />
+                <field field_ref="evappot_lic" level="10" />
+                <field field_ref="evappot_oce" level="10" />
+                <field field_ref="evappot_sic" level="10" />
+                <field field_ref="sens_ter" level="10" />
+                <field field_ref="sens_lic" level="10" />
+                <field field_ref="sens_oce" level="10" />
+                <field field_ref="sens_sic" level="10" />
+                <field field_ref="lat_ter" level="10" />
+                <field field_ref="lat_lic" level="10" />
+                <field field_ref="lat_oce" level="10" />
+                <field field_ref="lat_sic" level="10" />
+                <field field_ref="flw_ter" level="10" />
+                <field field_ref="flw_lic" level="10" />
+                <field field_ref="flw_oce" level="10" />
+                <field field_ref="flw_sic" level="10" />
+                <field field_ref="fsw_ter" level="10" />
+                <field field_ref="fsw_lic" level="10" />
+                <field field_ref="fsw_oce" level="10" />
+                <field field_ref="fsw_sic" level="10" />
+                <field field_ref="wbils_ter" level="10" />
+                <field field_ref="wbils_lic" level="10" />
+                <field field_ref="wbils_oce" level="10" />
+                <field field_ref="wbils_sic" level="10" />
+                <field field_ref="wbilo_ter" level="10" />
+                <field field_ref="wbilo_lic" level="10" />
+                <field field_ref="wbilo_oce" level="10" />
+                <field field_ref="wbilo_sic" level="10" />
+                <field field_ref="cdrm" level="10" />
+                <field field_ref="cdrh" level="10" />
+                <field field_ref="cldl" level="10" />
+                <field field_ref="cldm" level="10" />
+                <field field_ref="cldh" level="10" />
+                <field field_ref="cldt" level="10" />
+                <field field_ref="cldq" level="10" />
+                <field field_ref="lwp" level="10" />
+                <field field_ref="iwp" level="10" />
+                <field field_ref="ue" level="10" />
+                <field field_ref="ve" level="10" />
+                <field field_ref="uq" level="10" />
+                <field field_ref="vq" level="10" />
+                <field field_ref="cape" level="10" />
+                <field field_ref="pbase" level="10" />
+                <field field_ref="ptop" level="10" />
+                <field field_ref="fbase" level="10" />
+                <field field_ref="plcl" level="10" />
+                <field field_ref="plfc" level="10" />
+                <field field_ref="wbeff" level="10" />
+                <field field_ref="prw" level="10" />
+                <field field_ref="s_pblh" level="10" />
+                <field field_ref="s_pblt" level="10" />
+                <field field_ref="s_lcl" level="10" />
+                <field field_ref="s_therm" level="10" />
+                <field field_ref="slab_bils_oce" level="10" />
+                <field field_ref="ale_bl" level="10" />
+                <field field_ref="alp_bl" level="10" />
+                <field field_ref="ale_wk" level="10" />
+                <field field_ref="alp_wk" level="10" />
+                <field field_ref="ale" level="10" />
+                <field field_ref="alp" level="10" />
+                <field field_ref="cin" level="10" />
+                <field field_ref="wape" level="10" />
+                <field field_ref="n2" level="10" />
+                <field field_ref="s2" level="10" />
+                <field field_ref="proba_notrig" level="10" />
+                <field field_ref="random_notrig" level="10" />
+                <field field_ref="ale_bl_stat" level="10" />
+                <field field_ref="ale_bl_trig" level="10" />
+                <field field_ref="alp_bl_det" level="10" />
+                <field field_ref="alp_bl_fluct_m" level="10" />
+                <field field_ref="alp_bl_fluct_tke" level="10" />
+                <field field_ref="alp_bl_conv" level="10" />
+                <field field_ref="alp_bl_stat" level="10" />
+
+                <field_group operation="average" freq_op="1ts" detect_missing_value=".true.">
+                    <field field_ref="u850" level="10" />
+                    <field field_ref="u700" level="10" />
+                    <field field_ref="u500" level="10" />
+                    <field field_ref="u200" level="10" />
+                    <field field_ref="u100" level="10" />
+                    <field field_ref="u50" level="10" />
+                    <field field_ref="u10" level="10" />
+                    <field field_ref="v850" level="10" />
+                    <field field_ref="v700" level="10" />
+                    <field field_ref="v500" level="10" />
+                    <field field_ref="v200" level="10" />
+                    <field field_ref="v100" level="10" />
+                    <field field_ref="v50" level="10" />
+                    <field field_ref="v10" level="10" />
+                    <field field_ref="w850" level="10" />
+                    <field field_ref="w700" level="10" />
+                    <field field_ref="w500" level="10" />
+                    <field field_ref="w200" level="10" />
+                    <field field_ref="w100" level="10" />
+                    <field field_ref="w50" level="10" />
+                    <field field_ref="w10" level="10" />
+                    <field field_ref="t850" level="10" />
+                    <field field_ref="t700" level="10" />
+                    <field field_ref="t500" level="10" />
+                    <field field_ref="t200" level="10" />
+                    <field field_ref="t100" level="10" />
+                    <field field_ref="t50" level="10" />
+                    <field field_ref="t10" level="10" />
+                    <field field_ref="q850" level="10" />
+                    <field field_ref="q700" level="10" />
+                    <field field_ref="q500" level="10" />
+                    <field field_ref="q200" level="10" />
+                    <field field_ref="q100" level="10" />
+                    <field field_ref="q50" level="10" />
+                    <field field_ref="q10" level="10" />
+                    <field field_ref="z850" level="10" />
+                    <field field_ref="z700" level="10" />
+                    <field field_ref="z500" level="10" />
+                    <field field_ref="z200" level="10" />
+                    <field field_ref="z100" level="10" />
+                    <field field_ref="z50" level="10" />
+                    <field field_ref="z10" level="10" />
+                </field_group>
+
+                <field field_ref="t_oce_sic" level="10" />
+                <field field_ref="weakinv" level="10" />
+                <field field_ref="dthmin" level="10" />
+                <field field_ref="u10_ter" level="10" />
+                <field field_ref="u10_lic" level="10" />
+                <field field_ref="u10_oce" level="10" />
+                <field field_ref="u10_sic" level="10" />
+                <field field_ref="v10_ter" level="10" />
+                <field field_ref="v10_lic" level="10" />
+                <field field_ref="v10_oce" level="10" />
+                <field field_ref="v10_sic" level="10" />
+                <field field_ref="rh2m" level="10" />
+                <field field_ref="rh2m_min" level="10" operation="minimum" />
+                <field field_ref="rh2m_max" level="10" operation="maximum" />
+                <field field_ref="qsat2m" level="10" />
+                <field field_ref="tpot" level="10" />
+                <field field_ref="tpote" level="10" />
+                <field field_ref="tke" level="10" />
+                <field field_ref="tke_ter" level="10" />
+                <field field_ref="tke_lic" level="10" />
+                <field field_ref="tke_oce" level="10" />
+                <field field_ref="tke_sic" level="10" />
+                <field field_ref="tke_max_ter" level="10" operation="maximum" />
+                <field field_ref="tke_max_lic" level="10" operation="maximum" />
+                <field field_ref="tke_max_oce" level="10" operation="maximum" />
+                <field field_ref="tke_max_sic" level="10" operation="maximum" />
+                <field field_ref="SWnetOR" level="10" />
+                <field field_ref="SWdownOR" level="10" />
+                <field field_ref="LWdownOR" level="10" />
+                <field field_ref="snowl" level="10" />
+                <field field_ref="cape_max" level="10" operation="maximum" />
+                <field field_ref="solldown" level="10" />
+                <field field_ref="dtsvdfo" level="10" />
+                <field field_ref="dtsvdft" level="10" />
+                <field field_ref="dtsvdfg" level="10" />
+                <field field_ref="dtsvdfi" level="10" />
+                <field field_ref="rugs" level="10" />
+                <field field_ref="z0m" level="10" />
+                <field field_ref="z0h" level="10" />
+                <field field_ref="topswad" level="10" />
+                <field field_ref="topswad0" level="10" />
+                <field field_ref="topswai" level="10" />
+                <field field_ref="solswad" level="10" />
+                <field field_ref="solswad0" level="10" />
+                <field field_ref="solswai" level="10" />
+                <field field_ref="OD550_ASBCM" level="10" />
+                <field field_ref="OD550_ASPOMM" level="10" />
+                <field field_ref="OD550_ASSO4M" level="10" />
+                <field field_ref="OD550_CSSO4M" level="10" />
+                <field field_ref="OD550_SSSSM" level="10" />
+                <field field_ref="OD550_ASSSM" level="10" />
+                <field field_ref="OD550_CSSSM" level="10" />
+                <field field_ref="OD550_CIDUSTM" level="10" />
+                <field field_ref="OD550_AIBCM" level="10" />
+                <field field_ref="OD550_AIPOMM" level="10" />
+                <field field_ref="OD550_STRAT" level="10" />
+                <field field_ref="od550aer" level="10" />
+                <field field_ref="od865aer" level="10" />
+                <field field_ref="absvisaer" level="10" />
+                <field field_ref="od550lt1aer" level="10" />
+                <field field_ref="sconcso4" level="10" />
+                <field field_ref="sconcoa" level="10" />
+                <field field_ref="sconcbc" level="10" />
+                <field field_ref="sconcss" level="10" />
+                <field field_ref="sconcdust" level="10" />
+                <field field_ref="loadso4" level="10" />
+                <field field_ref="loadoa" level="10" />
+                <field field_ref="loadbc" level="10" />
+                <field field_ref="loadss" level="10" />
+                <field field_ref="loaddust" level="10" />
+                <field field_ref="swtoaas_nat" level="10" />
+                <field field_ref="swsrfas_nat" level="10" />
+                <field field_ref="swtoacs_nat" level="10" />
+                <field field_ref="swsrfcs_nat" level="10" />
+                <field field_ref="swtoaas_ant" level="10" />
+                <field field_ref="swsrfas_ant" level="10" />
+                <field field_ref="swtoacs_ant" level="10" />
+                <field field_ref="swsrfcs_ant" level="10" />
+                <field field_ref="swtoacf_nat" level="10" />
+                <field field_ref="swsrfcf_nat" level="10" />
+                <field field_ref="swtoacf_ant" level="10" />
+                <field field_ref="swsrfcf_ant" level="10" />
+                <field field_ref="swtoacf_zero" level="10" />
+                <field field_ref="swsrfcf_zero" level="10" />
+                <field field_ref="cldncl" level="10" />
+                <field field_ref="reffclwtop" level="10" />
+                <field field_ref="cldnvi" level="10" />
+                <field field_ref="lcc" level="10" />
+                <field field_ref="wvapp" level="10" />
+                <field field_ref="ozone_daylight" level="10" />
+                <field field_ref="albe_ter" level="10" />
+                <field field_ref="albe_lic" level="10" />
+                <field field_ref="albe_oce" level="10" />
+                <field field_ref="albe_sic" level="10" />
+                <field field_ref="ages_ter" level="10" />
+                <field field_ref="ages_lic" level="10" />
+                <field field_ref="ages_oce" level="10" />
+                <field field_ref="ages_sic" level="10" />
+                <field field_ref="snow_ter" level="10" />
+                <field field_ref="snow_lic" level="10" />
+                <field field_ref="snow_oce" level="10" />
+                <field field_ref="snow_sic" level="10" />
+                <field field_ref="rugs_ter" level="10" />
+                <field field_ref="rugs_lic" level="10" />
+                <field field_ref="rugs_oce" level="10" />
+                <field field_ref="rugs_sic" level="10" />
+                <field field_ref="z0m_ter" level="10" />
+                <field field_ref="z0m_lic" level="10" />
+                <field field_ref="z0m_oce" level="10" />
+                <field field_ref="z0m_sic" level="10" />
+                <field field_ref="z0h_ter" level="10" />
+                <field field_ref="z0h_lic" level="10" />
+                <field field_ref="z0h_oce" level="10" />
+                <field field_ref="z0h_sic" level="10" />
+                <field field_ref="alb1" level="10" />
+                <field field_ref="alb2" level="10" />
+                <field field_ref="ftime_con" level="10" operation="instant" />
+                <field field_ref="wake_h" level="10" />
+                <field field_ref="wake_s" level="10" />
+                <field field_ref="plulth" level="10" />
+                <field field_ref="plulst" level="10" />
+                <field field_ref="lmaxth" level="10" />
+                <field field_ref="ftime_th" level="10" />
+                <field field_ref="f0_th" level="10" />
+                <field field_ref="zmax_th" level="10" />
+                <field field_ref="rsut4co2" level="10" />
+                <field field_ref="rlut4co2" level="10" />
+                <field field_ref="rsutcs4co2" level="10" />
+                <field field_ref="rlutcs4co2" level="10" />
+            </field_group>
+
+            <!-- VARS 3D -->
+            <field_group operation="average" freq_op="1ts" axis_ref="presnivs">
+                <field field_ref="cldtau" level="10" />
+                <field field_ref="cldemi" level="10" />
+                <field field_ref="tke_max" level="10" operation="maximum" />
+                <field field_ref="kz" level="10" />
+                <field field_ref="kz_max" level="10" operation="maximum" />
+                <field field_ref="concso4" level="10" />
+                <field field_ref="concoa" level="10" />
+                <field field_ref="concbc" level="10" />
+                <field field_ref="concss" level="10" />
+                <field field_ref="concdust" level="10" />
+                <field field_ref="ec550aer" level="10" />
+                <field field_ref="lwcon" level="10" />
+                <field field_ref="iwcon" level="10" />
+                <field field_ref="temp" level="10" />
+                <field field_ref="theta" level="10" />
+                <field field_ref="ovap" level="10" />
+                <field field_ref="ovapinit" level="10" />
+                <field field_ref="oliq" level="10" />
+                <field field_ref="geop" level="10" />
+                <field field_ref="vitu" level="10" />
+                <field field_ref="vitv" level="10" />
+                <field field_ref="vitw" level="10" />
+                <field field_ref="pres" level="10" />
+                <field field_ref="paprs" level="10" />
+                <field field_ref="mass" level="10" />
+                <field field_ref="zfull" level="10" />
+                <field field_ref="zhalf" level="10" />
+                <field field_ref="rneb" level="10" />
+                <field field_ref="rnebcon" level="10" />
+                <field field_ref="rnebls" level="10" />
+                <field field_ref="rhum" level="10" />
+                <field field_ref="ozone" level="10" />
+                <field field_ref="upwd" level="10" />
+                <field field_ref="dtphy" level="10" />
+                <field field_ref="dqphy" level="10" />
+                <field field_ref="pr_con_l" level="10" />
+                <field field_ref="pr_con_i" level="10" />
+                <field field_ref="pr_lsc_l" level="10" />
+                <field field_ref="pr_lsc_i" level="10" />
+                <field field_ref="re" level="10" />
+                <field field_ref="fl" level="10" />
+                <field field_ref="scdnc" level="10" />
+                <field field_ref="reffclws" level="10" />
+                <field field_ref="reffclwc" level="10" />
+                <field field_ref="lcc3d" level="10" />
+                <field field_ref="lcc3dcon" level="10" />
+                <field field_ref="lcc3dstra" level="10" />
+                <field field_ref="clwcon" level="10" />
+                <field field_ref="Ma" level="10" />
+                <field field_ref="dnwd" level="10" />
+                <field field_ref="dnwd0" level="10" />
+                <field field_ref="mc" level="10" />
+                <field field_ref="dtdyn" level="10" />
+                <field field_ref="dqdyn" level="10" />
+                <field field_ref="dudyn" level="10" />
+                <field field_ref="dvdyn" level="10" />
+                <field field_ref="dtcon" level="10" />
+                <field field_ref="ducon" level="10" />
+                <field field_ref="dvcon" level="10" />
+                <field field_ref="dqcon" level="10" />
+                <field field_ref="dtwak" level="10" />
+                <field field_ref="dqwak" level="10" />
+                <field field_ref="wake_deltat" level="10" />
+                <field field_ref="wake_deltaq" level="10" />
+                <field field_ref="wake_omg" level="10" />
+                <field field_ref="wdtrainA" level="10" />
+                <field field_ref="wdtrainM" level="10" />
+                <field field_ref="Vprecip" level="10" />
+                <field field_ref="ftd" level="10" />
+                <field field_ref="fqd" level="10" />
+                <field field_ref="dtlsc" level="10" />
+                <field field_ref="dtlschr" level="10" />
+                <field field_ref="dqlsc" level="10" />
+                <field field_ref="beta_prec" level="10" />
+                <field field_ref="dtvdf" level="10" />
+                <field field_ref="dtdis" level="10" />
+                <field field_ref="dqvdf" level="10" />
+                <field field_ref="dteva" level="10" />
+                <field field_ref="dqeva" level="10" />
+                <field field_ref="dqlscth" level="10" />
+                <field field_ref="dqlscst" level="10" />
+                <field field_ref="dtlscth" level="10" />
+                <field field_ref="dtlscst" level="10" />
+                <field field_ref="ptconvth" level="10" />
+                <field field_ref="ptconv" level="10" />
+                <field field_ref="ratqs" level="10" />
+                <field field_ref="dtthe" level="10" />
+                <field field_ref="f_th" level="10" />
+                <field field_ref="e_th" level="10" />
+                <field field_ref="w_th" level="10" />
+                <field field_ref="lambda_th" level="10" />
+                <field field_ref="q_th" level="10" />
+                <field field_ref="a_th" level="10" />
+                <field field_ref="d_th" level="10" />
+                <field field_ref="dqthe" level="10" />
+                <field field_ref="dtajs" level="10" />
+                <field field_ref="dqajs" level="10" />
+                <field field_ref="dtswr" level="10" />
+                <field field_ref="dtsw0" level="10" />
+                <field field_ref="dtlwr" level="10" />
+                <field field_ref="dtlw0" level="10" />
+                <field field_ref="dtec" level="10" />
+                <field field_ref="duvdf" level="10" />
+                <field field_ref="dvvdf" level="10" />
+                <field field_ref="duoro" level="10" />
+                <field field_ref="dvoro" level="10" />
+                <field field_ref="dulif" level="10" />
+                <field field_ref="dvlif" level="10" />
+                <field field_ref="dtoro" level="10" />
+                <field field_ref="dtlif" level="10" />
+                <field field_ref="dthin" level="10" />
+                <field field_ref="rsu" level="10" />
+                <field field_ref="rsd" level="10" />
+                <field field_ref="rlu" level="10" />
+                <field field_ref="rld" level="10" />
+                <field field_ref="rsucs" level="10" />
+                <field field_ref="rsdcs" level="10" />
+                <field field_ref="rlucs" level="10" />
+                <field field_ref="rldcs" level="10" />
+                <field field_ref="tnt" level="10" />
+                <field field_ref="tntc" level="10" />
+                <field field_ref="tntr" level="10" />
+                <field field_ref="tntscpbl" level="10" />
+                <field field_ref="tnhus" level="10" />
+                <field field_ref="tnhusc" level="10" />
+                <field field_ref="tnhusscpbl" level="10" />
+                <field field_ref="evu" level="10" />
+                <field field_ref="h2o" level="10" />
+                <field field_ref="mcd" level="10" />
+                <field field_ref="dmc" level="10" />
+                <field field_ref="ref_liq" level="10" />
+                <field field_ref="ref_ice" level="10" />
+                <field field_ref="rsu4co2" level="10" />
+                <field field_ref="rlu4co2" level="10" />
+                <field field_ref="rsucs4co2" level="10" />
+                <field field_ref="rlucs4co2" level="10" />
+                <field field_ref="rsd4co2" level="10" />
+                <field field_ref="rld4co2" level="10" />
+                <field field_ref="rsdcs4co2" level="10" />
+                <field field_ref="rldcs4co2" level="10" />
+            </field_group>
+        </file>
+    </file_group>
+</file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-lim2.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-lim2.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-lim2.xml	(revision 5893)
@@ -0,0 +1,80 @@
+<?xml version="1.0"?>
+    <!-- $id$ -->
+    
+ <!--
+============================================================================================================
+=                                           output files definition                                        =
+=                                            Define your own files for lim3                                =
+=                                         put the variables you want...                                    =
+============================================================================================================
+  -->
+    
+    <file_definition type="one_file" name="@expname@_@freq@" sync_freq="1d" min_digits="4">
+    
+      <file_group id="1ts" output_freq="1ts"  output_level="10" enabled=".TRUE."/> <!-- 1 time step files -->
+      <file_group id="1h" output_freq="1h"  output_level="10" enabled=".TRUE."/> <!-- 1h files -->
+      <file_group id="2h" output_freq="2h"  output_level="10" enabled=".TRUE."/> <!-- 2h files -->
+      <file_group id="3h" output_freq="3h"  output_level="10" enabled=".TRUE."/> <!-- 3h files -->     
+      <file_group id="4h" output_freq="4h"  output_level="10" enabled=".TRUE."/> <!-- 4h files -->
+      <file_group id="6h" output_freq="6h"  output_level="10" enabled=".TRUE."/> <!-- 6h files -->        
+      <file_group id="1d" output_freq="1d"  output_level="10" enabled=".TRUE."/>  <!-- 5d files -->   	
+      <file_group id="5d" output_freq="5d"  output_level="10" enabled=".TRUE."/>  <!-- 5d files -->   	
+
+      <file_group id="1m" output_freq="1mo" output_level="10" enabled="_AUTO_"> <!-- real monthly files -->
+
+	<file id="file16" name_suffix="_icemod" description="ice variables" enabled=".TRUE." >
+
+	  <field field_ref="ice_pres" />
+	  <field field_ref="ice_cover"    name="sic"       long_name="sea_ice_area_fraction"                                           />
+	  <field field_ref="icethic_cea"  name="iicethic"       long_name="sea_ice_thickness"                                               />
+	  <field field_ref="snowthic_cea" name="isnowthi"       long_name="surface_snow_thickness"                                          />
+	  <!-- snc : surface_snow_area_fraction : same as sic -->
+	  <field field_ref="icealb_cea"   name="ialb"      long_name="Bare Sea Ice Albedo"                                             />
+	  <!-- ssi : Sea Ice Salinity : cte = sice = 6, expect in baltic sea = 2 -->
+	  <field field_ref="ist_cea"      name="tsice"     long_name="Surface Temperature of Sea Ice"                                  />
+	  <!-- tsnint : Temperature at Interface Between Sea Ice and Snow : not available -->
+	  <!-- pr : Surface Rainfall Rate into the Sea Ice Portion of the Grid Cell = 0 -->
+	  <field field_ref="snow_ai_cea"  name="prsn"      long_name="Surface Snowfall Rate into the Sea Ice Portion of the Grid Cell" />
+	  <!-- ageice   : Age of Sea Ice : not available ??? -->
+	  <!-- grFrazil : Frazil Sea Ice Growth (Leads) Rate ??? -->
+	  <!-- grCongel : Congelation Sea Ice Growth Rate ??? -->
+	  <field field_ref="licepro_cea"  name="grLateral" long_name="Lateral Sea Ice Growth Rate"                                     />
+	  <field field_ref="sntoice_cea"  name="snoToIce"  long_name="Snow-Ice Formation Rate"                                         />
+	  <field field_ref="snowmel_cea"  name="snomelt"   long_name="Snow Melt Rate"                                                  />
+	  <field field_ref="ticemel_cea"  name="tmelt"     long_name="Rate of Melt at Upper Surface of Sea Ice"                        />
+	  <field field_ref="bicemel_cea"  name="bmelt"     long_name="Rate of Melt at Sea Ice Base"                                    />
+	  <!-- hcice  : Sea Ice Total Heat Content ??? -->
+	  <field field_ref="qsr_ai_cea"   name="rsdssi"    long_name="surface_downwelling_shortwave_flux_in_air"                       />
+	  <!-- rsussi : surface_upwelling_shortwave_flux_in_air ??? -->
+	  <!-- rldssi : surface_downwelling_longwave_flux_in_air ??? -->
+	  <!-- rlussi : surface_upwelling_longwave_flux_in_air ??? -->
+	  <!-- hfssi  : surface_upward_sensible_heat_flux ??? -->
+	  <!-- hflssi : surface_upward_latent_heat_flux ??? -->
+	  <field field_ref="subl_ai_cea"  name="sblsi"     long_name="surface_snow_and_ice_sublimation_flux"                           />
+	  <field field_ref="u_imasstr"    name="transix"   long_name="Eastward Sea Ice Transport"                                      />
+	  <field field_ref="v_imasstr"    name="transiy"   long_name="Northward Sea Ice Transport"                                     />
+	  <field field_ref="fram_trans"   name="transifs"  long_name="Sea Ice Mass Transport Through Fram Strait"                      />
+	  <field field_ref="utau_ice"     name="strairx"   long_name="Eastward Atmospheric Stress On Sea Ice"                          />
+	  <field field_ref="vtau_ice"     name="strairy"   long_name="Northward Atmospheric Stress On Sea Ice"                         />
+	  <!-- strocnx : Eastward Ocean Stress On Sea Ice ??? -->
+	  <!-- strocny : Northward Ocean Stress On Sea Ice ??? -->
+	  <!-- streng  : Compressive Sea Ice Strength ??? -->
+	  <!-- divice  : Strain Rate Divergence of Sea Ice ??? -->
+	  <!-- shrice  : Strain Rate Shear of Sea Ice ??? -->
+	  <!-- ridgice : Sea Ice Ridging Rate ??? -->
+
+	</file>
+
+      </file_group>
+
+
+      <file_group id="2m" output_freq="2mo" output_level="10" enabled=".TRUE."/> <!-- real 2m files -->
+      <file_group id="3m" output_freq="3mo" output_level="10" enabled=".TRUE."/> <!-- real 3m files -->
+      <file_group id="4m" output_freq="4mo" output_level="10" enabled=".TRUE."/> <!-- real 4m files -->
+      <file_group id="6m" output_freq="6mo" output_level="10" enabled=".TRUE."/> <!-- real 6m files -->
+      <file_group id="1y"  output_freq="1y" output_level="10" enabled=".TRUE."/> <!-- real yearly files -->
+      <file_group id="2y"  output_freq="2y" output_level="10" enabled=".TRUE."/> <!-- real 2y files -->
+      <file_group id="5y"  output_freq="5y" output_level="10" enabled=".TRUE."/> <!-- real 5y files -->
+      <file_group id="10y" output_freq="10y" output_level="10" enabled=".TRUE."/> <!-- real 10y files -->
+
+   </file_definition>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-opa.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-opa.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-opa.xml	(revision 5893)
@@ -0,0 +1,491 @@
+<?xml version="1.0"?>
+
+<!--
+============================================================================================================
+=                                           output files definition                                        =
+=                                            Define your own filesfor ocean dynamics context                                         =
+=                                         put the variables you want...                                    =
+============================================================================================================
+    -->
+   
+    <file_definition type="one_file" name="@expname@_@freq@" sync_freq="1d" min_digits="4">
+    
+      <file_group id="1ts" output_freq="1ts"  output_level="10" enabled=".TRUE."/> <!-- 1 time step files -->
+
+      <file_group id="1h" output_freq="1h"  output_level="10" enabled=".TRUE."/> <!-- 1h files -->
+
+      <file_group id="2h" output_freq="2h"  output_level="10" enabled=".TRUE."/> <!-- 2h files -->
+
+      <file_group id="3h" output_freq="3h"  output_level="10" enabled=".TRUE."/> <!-- 3h files -->     
+
+      <file_group id="4h" output_freq="4h"  output_level="10" enabled=".TRUE."/> <!-- 4h files -->
+
+      <file_group id="6h" output_freq="6h"  output_level="10" enabled=".TRUE."/> <!-- 6h files -->     
+    
+      <file_group id="1d" output_freq="1d"  output_level="10" enabled="_AUTO_">  <!-- 5d files -->   
+	
+        <file id="file1" name_suffix="_grid_T" description="ocean T grid variables" >
+	  <field field_ref="sst"          name="tos"      long_name="sea_surface_temperature"                       />
+	  <field field_ref="sss"          name="sos"      long_name="sea_surface_salinity"                          />
+	  <field field_ref="ssh"          name="zos"      long_name="sea_surface_height_above_geoid"                />
+	  <field field_ref="sst"          name="tosstd"   long_name="sea_surface_temperature_standard_deviation"         operation="average" freq_op="1d" > sqrt( @sst2 - @sst * @sst ) </field>
+	  <field field_ref="ssh"          name="zosstd"   long_name="sea_surface_height_above_geoid_standard_deviation"  operation="average" freq_op="1d" > sqrt( @ssh2 - @ssh * @ssh ) </field>
+	  <field field_ref="sst"          name="sstdcy"   long_name="amplitude of sst diurnal cycle" operation="average" freq_op="1d" > @sstmax - @sstmin </field>
+	  <field field_ref="mldr10_1"     />
+	  <field field_ref="mldr10_1"     name="mldr10_1dcy"  long_name="amplitude of mldr10_1 diurnal cycle" operation="average" freq_op="1d" > @mldr10_1max - @mldr10_1min </field>
+	</file>
+       
+        <file id="file2" name_suffix="_scalar" description="scalar variables" >
+           <field field_ref="voltot"      grid_ref="grid_1point"     name="scvoltot"  />
+           <field field_ref="sshtot"      grid_ref="grid_1point"     name="scsshtot"  />
+           <field field_ref="sshsteric"   grid_ref="grid_1point"   name="scsshste"  />
+           <field field_ref="sshthster"   grid_ref="grid_1point"   name="scsshtst"  />
+           <field field_ref="masstot"     grid_ref="grid_1point"   name="scmastot"  />
+           <field field_ref="temptot"     grid_ref="grid_1point"   name="sctemtot"  />
+           <field field_ref="saltot"      grid_ref="grid_1point"   name="scsaltot"  />
+
+          <field field_ref="bgtemper"     grid_ref="grid_1point" name="bgtemper"    />
+          <field field_ref="bgsaline"     grid_ref="grid_1point" name="bgsaline"    />
+          <field field_ref="bgheatco"     grid_ref="grid_1point" name="bgheatco"    />
+          <field field_ref="bgsaltco"     grid_ref="grid_1point" name="bgsaltco"    />
+          <field field_ref="bgvolssh"     grid_ref="grid_1point" name="bgvolssh"    /> 
+          <field field_ref="bgvole3t"     grid_ref="grid_1point" name="bgvole3t"    />
+          <field field_ref="bgfrcvol"     grid_ref="grid_1point" name="bgfrcvol"    />
+          <field field_ref="bgfrctem"     grid_ref="grid_1point" name="bgfrctem"    />
+          <field field_ref="bgfrcsal"     grid_ref="grid_1point" name="bgfrcsal"    />
+	</file>
+
+        <file id="file3" name_suffix="_SBC_scalar" description="scalar variables" >
+      <field field_ref="ibgvoltot"  grid_ref="grid_1point"  name="ibgvoltot"   />
+      <field field_ref="sbgvoltot"  grid_ref="grid_1point"  name="sbgvoltot"   />
+      <field field_ref="ibgarea"    grid_ref="grid_1point"  name="ibgarea"     />
+      <field field_ref="ibgsaline"  grid_ref="grid_1point"  name="ibgsaline"   />
+      <field field_ref="ibgtemper"  grid_ref="grid_1point"  name="ibgtemper"   />
+      <field field_ref="ibgheatco"  grid_ref="grid_1point"  name="ibgheatco"   />
+      <field field_ref="sbgheatco"  grid_ref="grid_1point"  name="sbgheatco"   />
+      <field field_ref="ibgsaltco"  grid_ref="grid_1point"  name="ibgsaltco"   />
+      
+      <field field_ref="ibgvfx"     grid_ref="grid_1point"  name="ibgvfx"      />
+      <field field_ref="ibgvfxbog"  grid_ref="grid_1point"  name="ibgvfxbog"      />
+      <field field_ref="ibgvfxopw"  grid_ref="grid_1point"  name="ibgvfxopw"      />
+      <field field_ref="ibgvfxsni"  grid_ref="grid_1point"  name="ibgvfxsni"      />
+      <field field_ref="ibgvfxdyn"  grid_ref="grid_1point"  name="ibgvfxdyn"      />
+      <field field_ref="ibgvfxbom"  grid_ref="grid_1point"  name="ibgvfxbom"      />
+      <field field_ref="ibgvfxsum"  grid_ref="grid_1point"  name="ibgvfxsum"      />
+      <field field_ref="ibgvfxres"  grid_ref="grid_1point"  name="ibgvfxres"      />
+      <field field_ref="ibgvfxspr"  grid_ref="grid_1point"  name="ibgvfxspr"      />
+      <field field_ref="ibgvfxsnw"  grid_ref="grid_1point"  name="ibgvfxsnw"      />
+      <field field_ref="ibgvfxsub"  grid_ref="grid_1point"  name="ibgvfxsub"      />
+      
+      <field field_ref="ibgsfx"     grid_ref="grid_1point"  name="ibgsfx"     />
+      <field field_ref="ibgsfxbri"  grid_ref="grid_1point"  name="ibgsfxbri"    />
+      <field field_ref="ibgsfxdyn"  grid_ref="grid_1point"  name="ibgsfxdyn" />
+      <field field_ref="ibgsfxres"  grid_ref="grid_1point"  name="ibgsfxres" />
+      <field field_ref="ibgsfxbog"  grid_ref="grid_1point"  name="ibgsfxbog"      />
+      <field field_ref="ibgsfxopw"  grid_ref="grid_1point"  name="ibgsfxopw"      />
+      <field field_ref="ibgsfxsni"  grid_ref="grid_1point"  name="ibgsfxsni"      />
+      <field field_ref="ibgsfxbom"  grid_ref="grid_1point"  name="ibgsfxbom"      />
+      <field field_ref="ibgsfxsum"  grid_ref="grid_1point"  name="ibgsfxsum"      />
+      
+      <field field_ref="ibghfxdhc"  grid_ref="grid_1point"  name="ibghfxdhc"    />
+      <field field_ref="ibghfxspr"  grid_ref="grid_1point"  name="ibghfxspr"    />
+      
+      <field field_ref="ibghfxres"   grid_ref="grid_1point" name="ibghfxres"    />
+      <field field_ref="ibghfxsub"   grid_ref="grid_1point" name="ibghfxsub"    />
+      <field field_ref="ibghfxdyn"   grid_ref="grid_1point" name="ibghfxdyn"    />
+      <field field_ref="ibghfxthd"   grid_ref="grid_1point" name="ibghfxthd"    />
+      <field field_ref="ibghfxsum"   grid_ref="grid_1point" name="ibghfxsum"    />
+      <field field_ref="ibghfxbom"   grid_ref="grid_1point" name="ibghfxbom"    />
+      <field field_ref="ibghfxbog"   grid_ref="grid_1point" name="ibghfxbog"    />
+      <field field_ref="ibghfxdif"   grid_ref="grid_1point" name="ibghfxdif"    />
+      <field field_ref="ibghfxopw"   grid_ref="grid_1point" name="ibghfxopw"    />
+      <field field_ref="ibghfxout"   grid_ref="grid_1point" name="ibghfxout"    />
+      <field field_ref="ibghfxin"   grid_ref="grid_1point"  name="ibghfxin"     />
+      <field field_ref="ibghfxsnw"   grid_ref="grid_1point" name="ibghfxsnw"    />
+      
+      <field field_ref="ibgfrcvol"   grid_ref="grid_1point" name="ibgfrcvol"   />
+      <field field_ref="ibgfrcsfx"   grid_ref="grid_1point" name="ibgfrcsfx"  />
+      <field field_ref="ibgvolgrm"   grid_ref="grid_1point" name="ibgvolgrm"    />
+      
+        </file>
+
+	<file id="file4" name_suffix="_SBC" description="surface fluxes variables" > <!-- time step automaticaly defined based on nn_fsbc -->
+	  <field field_ref="qsr_oce"       name="qsr_oce"  long_name="downward shortwave flux at ocean surface"           />
+	  <field field_ref="qns_oce"       name="qns_oce"  long_name="downward non solar flux at ocean surface"           />
+	  <field field_ref="qsr_ice"       name="qsr_ice"  long_name="downward shortwave flux at ice surface"           />
+	  <field field_ref="qns_ice"       name="qns_ice"  long_name="downward non solar flux at ice surface"           />
+	  <field field_ref="qtr_ice"       name="qtr_ice"  long_name="shortwave flux transmitted thru the ice"           />
+	  <field field_ref="taum"          name="taum" />
+	  <field field_ref="wspd"          name="windsp"  />
+	  <field field_ref="precip"        name="precip" />
+	  <!-- For heat conservation checking -->
+	  <field field_ref="qt_oce"        name="qt_oce"   long_name="downward total flux at ocean surface"           />
+	  <field field_ref="qemp_oce"      name="qemp_oce" long_name="Downward Heat Flux from E-P over open ocean"           />
+	  <field field_ref="qt_ice"        name="qt_ice"   long_name="downward total flux at ice surface"           />
+	  <field field_ref="qemp_ice"      name="qemp_ice" long_name="Downward Heat Flux from E-P over ice"           />
+	  <field field_ref="hflx_rain_cea" name="hflx_rain_cea"      />
+	  <field field_ref="hflx_evap_cea" name="hflx_evap_cea"      />
+	  <field field_ref="hflx_snow_cea" name="hflx_snow_cea"      />
+	  <field field_ref="hflx_cal_cea"  name="hflx_cal_cea"      />
+	  <!-- For freshwater conservation checking -->
+	  <field field_ref="empmr"         name="wfo"      long_name="water_flux_into_sea_water"                     />
+	  <field field_ref="emp_oce"       name="emp_oce"                      />
+	  <field field_ref="emp_ice"       name="emp_ice"                      />
+          <field field_ref="runoffs"       name="friver"   long_name="water_flux_into_sea_water_from_rivers"                   level="1" />
+	  <field field_ref="calving_cea"   name="calving" />
+	  <field field_ref="vfxice"        name="vfxice" />
+	  <field field_ref="vfxsnw"        name="vfxsnw" />
+	  <field field_ref="vfxsub"        name="vfxsub" />
+	  <field field_ref="vfxspr"        name="vfxspr" />
+	  <field field_ref="rain"          name="rain"      />
+	  <field field_ref="snow_ao_cea"   name="snow_ao_cea"      />
+	  <field field_ref="snow_ai_cea"   name="snow_ai_cea"      />
+	  <field field_ref="evap_ao_cea"   name="evap_ao_cea"      />
+	  <field field_ref="subl_ai_cea"   name="subl_ai_cea"      />
+	  <!-- For salt conservation checking -->
+          <field field_ref="saltflx"      name="sosflxdo"  />
+	  <!-- ice and snow -->
+	  <field field_ref="snowpre"      />
+	  <field field_ref="utau_ice"         name="utau_ice" />
+	  <field field_ref="vtau_ice"         name="vtau_ice" />
+	</file>
+
+      </file_group> 
+
+      <file_group id="5d" output_freq="5d"  output_level="10" enabled=".TRUE."/>  <!-- 5d files -->   
+	
+      <file_group id="1m" output_freq="1mo" output_level="10" enabled="_AUTO_"> <!-- real monthly files -->
+
+        <file id="file5" name_suffix="_grid_T" >
+	  <field field_ref="e3t" long_name="T-cell thickness" />
+          <field field_ref="botpres"      name="pbo"      long_name="Pressure_at_sea_floor"                                          />
+          <!-- pso : sea_water_pressure_at_sea_water_surface = 0 -->
+          <field field_ref="ssh"          name="zos"      long_name="sea_surface_height_above_geoid"                                 />
+          <field field_ref="ssh2"         name="zossq"    long_name="square_of_sea_surface_height_above_geoid"             level="2" />
+
+          <field field_ref="toce"         name="thetao"   long_name="sea_water_potential_temperature"   operation="average" freq_op="1mo" > @toce_e3t / @e3t </field>      
+          <field field_ref="sst"          name="tos"      long_name="sea_surface_temperature"                              level="1" />
+          <field field_ref="sst2"         name="tossq"    long_name="square_of_sea_surface_temperature"                    level="2" />
+          <field field_ref="soce"         name="so"       long_name="sea_water_salinity"                operation="average" freq_op="1mo" > @soce_e3t / @e3t </field>       
+          <field field_ref="sss"          name="sos"      long_name="sea_surface_salinity"                                 level="1" />
+          <field field_ref="rhop"         name="rhopoto"  long_name="sea_water_potential_density"                          level="2" />
+          <!-- no agessc : sea_water_age_since_surface_contact -->
+          <!-- no cfc11  : moles_per_unit_mass_of_cfc11_in_sea_water -->
+          <!-- msftbarot : ocean_barotropic_mass_streamfunction : offline -->
+          <!-- mlotst    :           ocean_mixed_layer_thickness_defined_by_sigma_t : must be done offline -->
+          <!-- mlotstsq  : square_of_ocean_mixed_layer_thickness_defined_by_sigma_t : must be done offline -->
+          <field field_ref="mldkz5"       name="omlmax"   long_name="ocean_mixed_layer_thickness_defined_by_mixing_scheme" level="2" operation="maximum" />
+          <field field_ref="mldkz5"       name="mldkz5"   level="2"  />
+          <field field_ref="mldr10_1"     name="mldr10_1" level="2" />
+          <field field_ref="mldr10_1max"  name="mldr10_1max"  long_name="max of Mixed Layer Depth 0.01 ref.10m"              operation="maximum" />
+          <!-- wfonocorr : water_flux_into_sea_water_without_flux_correction : emp - erp -->
+          <field field_ref="erp"          name="wfcorr"   long_name="water_flux_correction"                                   level="1" /> <!-- usually = 0 -->
+          <field field_ref="qns"           name="nshfls"      long_name="surface_net_downward_non_solar_flux"                                         level="1" />
+          <field field_ref="qsr"           name="rsntds"      long_name="surface_net_downward_shortwave_flux"                                         level="1" />
+          <field field_ref="qsr3d"         name="rsds"        long_name="downwelling_shortwave_flux_in_sea_water"                                     level="1" />
+          <field field_ref="qrp"           name="hfcorr"      long_name="heat_flux_correction"                                                        level="1" />
+      <!-- next variables available with key_diahth -->
+      <field field_ref="mlddzt"        level="1" />
+      <field field_ref="mldr10_3"      level="1" />
+      <field field_ref="mldr0_1"       level="1" />
+      <field field_ref="mldr0_3"       level="1" />
+      <field field_ref="mld_dt02"      level="1" />
+      <field field_ref="topthdep"      level="1" />
+      <field field_ref="pycndep"       level="1" />
+      <field field_ref="BLT"           level="1" />
+      <field field_ref="tinv"          level="1" />
+      <field field_ref="depti"         level="1" />
+      <!-- <field field_ref="20d"           level="1" /> -->
+      <!-- <field field_ref="28d"           level="1" /> -->
+      <field field_ref="hc300"         level="1" />
+      <!-- next variables are additional for PISCES offline-->
+          <field field_ref="hdiv"         name="hdivtr"   long_name="horizontal divergence transport"      operation="average" freq_op="1mo" > @hdiv * @e3t </field>
+          <field field_ref="wspd"         name="windsp"  />
+          <field field_ref="empbmr"       name="wfob"     long_name="water_flux_into_sea_water at prev time-step"    />
+          <field field_ref="fmmflx"       name="fmmflx"  />
+          <field field_ref="iceconc"      name="siconc"  />
+	  <!-- For heat conservation checking -->
+	  <field field_ref="qt_oce"        name="qt_oce"   long_name="downward total flux at ocean surface"           />
+	  <field field_ref="qemp_oce"      name="qemp_oce" long_name="Downward Heat Flux from E-P over open ocean"           />
+	  <field field_ref="qt_ice"        name="qt_ice"   long_name="downward total flux at ice surface"           />
+	  <field field_ref="qemp_ice"      name="qemp_ice" long_name="Downward Heat Flux from E-P over ice"           />
+	  <field field_ref="hflx_rain_cea" name="hflx_rain_cea"      />
+	  <field field_ref="hflx_evap_cea" name="hflx_evap_cea"      />
+	  <field field_ref="hflx_snow_cea" name="hflx_snow_cea"      />
+	  <field field_ref="hflx_cal_cea"  name="hflx_cal_cea"      />
+	  <!-- For freshwater conservation checking -->
+	  <field field_ref="empmr"         name="wfo"      long_name="water_flux_into_sea_water"                     />
+	  <field field_ref="emp_oce"       name="emp_oce"                      />
+	  <field field_ref="emp_ice"       name="emp_ice"                      />
+          <field field_ref="runoffs"       name="friver"   long_name="water_flux_into_sea_water_from_rivers"                   level="1" />
+	  <field field_ref="calving_cea"   name="calving" />
+	  <field field_ref="vfxice"        name="vfxice" />
+	  <field field_ref="vfxsnw"        name="vfxsnw" />
+	  <field field_ref="vfxsub"        name="vfxsub" />
+	  <field field_ref="vfxspr"        name="vfxspr" />
+	  <field field_ref="rain"          name="rain"      />
+	  <field field_ref="snow_ao_cea"   name="snow_ao_cea"      />
+	  <field field_ref="snow_ai_cea"   name="snow_ai_cea"      />
+	  <field field_ref="evap_ao_cea"   name="evap_ao_cea"      />
+	  <field field_ref="subl_ai_cea"   name="subl_ai_cea"      />
+	  <!-- For salt conservation checking -->
+          <field field_ref="saltflx"      name="sosflxdo"  />
+        </file>
+
+	<file id="file6" name_suffix="_grid_U" description="ocean U grid variables" >
+	  <field field_ref="e3u"  />
+	  <field field_ref="ssu"          name="uos"     long_name="sea_surface_x_velocity"    />
+	  <field field_ref="uoce"         name="uo"      long_name="sea_water_x_velocity" operation="average" freq_op="1mo" > @uoce_e3u / @e3u </field>
+	  <field field_ref="utau"         name="tauuo"   long_name="surface_downward_x_stress" />
+          <field field_ref="uocetr_eff"   name="uocetr_eff"  />
+          <field field_ref="ahu_bbl"       />
+      <!-- available with key_diaar5 -->
+      <field field_ref="u_masstr"     name="vozomatr"  />
+      <field field_ref="u_heattr"     name="sozohetr"  />
+      <field field_ref="u_salttr"     name="sozosatr"  />
+	</file>
+	
+	<file id="file7" name_suffix="_grid_V" description="ocean V grid variables" >
+	  <field field_ref="e3v"  />
+	  <field field_ref="ssv"          name="vos"     long_name="sea_surface_y_velocity"    />
+	  <field field_ref="voce"         name="vo"      long_name="sea_water_y_velocity" operation="average" freq_op="1mo" > @voce_e3v / @e3v </field>
+	  <field field_ref="vtau"         name="tauvo"   long_name="surface_downward_y_stress" />
+          <field field_ref="vocetr_eff"   name="vocetr_eff"  />
+          <field field_ref="ahv_bbl"       />
+      <!-- available with key_diaar5 -->
+      <field field_ref="v_masstr"     name="vomematr"  />
+      <field field_ref="v_heattr"     name="somehetr"  />
+      <field field_ref="v_salttr"     name="somesatr"  />
+	</file>
+	
+	<file id="file8" name_suffix="_grid_W" description="ocean W grid variables" >
+	  <field field_ref="e3w"  />
+	  <field field_ref="woce"         name="wo"     />
+	  <field field_ref="avt"          name="difvho"  long_name="ocean_vertical_heat_diffusivity" />
+	  <field field_ref="w_masstr"     name="vovematr"  />
+          <field field_ref="logavs"       name="difvsolog"  long_name="ocean_vertical_salt_diffusivity" operation="average" freq_op="1mo" > exp( @logavs ) </field>
+          <field field_ref="aht2d"        name="ahtt"   />
+          <field field_ref="aht2d_eiv"    name="aeiv"   />
+	</file>
+
+	<file id="file9" name_suffix="_scalar" description="scalar variables" enabled=".true." >
+      <field field_ref="voltot"   grid_ref="grid_1point"    name="scvoltot"  />
+      <field field_ref="sshtot"   grid_ref="grid_1point"    name="scsshtot"  />
+      <field field_ref="sshsteric" grid_ref="grid_1point"   name="scsshste"  />
+      <field field_ref="sshthster" grid_ref="grid_1point"   name="scsshtst"  />
+      <field field_ref="masstot"    grid_ref="grid_1point"  name="scmastot"  />
+      <field field_ref="temptot"   grid_ref="grid_1point"   name="sctemtot"  />
+      <field field_ref="saltot"    grid_ref="grid_1point"   name="scsaltot"  />
+
+      <field field_ref="bgtemper"   grid_ref="grid_1point"  name="bgtemper"    />
+      <field field_ref="bgsaline"   grid_ref="grid_1point"  name="bgsaline"    />
+      <field field_ref="bgheatco"   grid_ref="grid_1point"  name="bgheatco"    />
+      <field field_ref="bgsaltco"   grid_ref="grid_1point"  name="bgsaltco"    />
+      <field field_ref="bgvolssh"   grid_ref="grid_1point"  name="bgvolssh"    /> 
+      <field field_ref="bgvole3t"   grid_ref="grid_1point"  name="bgvole3t"    />
+      <field field_ref="bgfrcvol"   grid_ref="grid_1point"  name="bgfrcvol"    />
+      <field field_ref="bgfrctem"   grid_ref="grid_1point"  name="bgfrctem"    />
+      <field field_ref="bgfrcsal"   grid_ref="grid_1point"  name="bgfrcsal"    />
+
+      <field field_ref="ibgvoltot"  grid_ref="grid_1point"  name="ibgvoltot"   />
+      <field field_ref="sbgvoltot"  grid_ref="grid_1point"  name="sbgvoltot"   />
+      <field field_ref="ibgarea"    grid_ref="grid_1point"  name="ibgarea"     />
+      <field field_ref="ibgsaline"  grid_ref="grid_1point"  name="ibgsaline"   />
+      <field field_ref="ibgtemper"  grid_ref="grid_1point"  name="ibgtemper"   />
+      <field field_ref="ibgheatco"  grid_ref="grid_1point"  name="ibgheatco"   />
+      <field field_ref="sbgheatco"   grid_ref="grid_1point" name="sbgheatco"   />
+      <field field_ref="ibgsaltco"   grid_ref="grid_1point" name="ibgsaltco"   />
+
+      <field field_ref="ibgvfx"     grid_ref="grid_1point"  name="ibgvfx"      />
+      <field field_ref="ibgvfxbog"  grid_ref="grid_1point"  name="ibgvfxbog"      />
+      <field field_ref="ibgvfxopw"  grid_ref="grid_1point"  name="ibgvfxopw"      />
+      <field field_ref="ibgvfxsni"  grid_ref="grid_1point"  name="ibgvfxsni"      />
+      <field field_ref="ibgvfxdyn"  grid_ref="grid_1point"  name="ibgvfxdyn"      />
+      <field field_ref="ibgvfxbom"  grid_ref="grid_1point"  name="ibgvfxbom"      />
+      <field field_ref="ibgvfxsum"  grid_ref="grid_1point"  name="ibgvfxsum"      />
+      <field field_ref="ibgvfxres"  grid_ref="grid_1point"  name="ibgvfxres"      />
+      <field field_ref="ibgvfxspr"  grid_ref="grid_1point"  name="ibgvfxspr"      />
+      <field field_ref="ibgvfxsnw"  grid_ref="grid_1point"  name="ibgvfxsnw"      />
+      <field field_ref="ibgvfxsub"  grid_ref="grid_1point"  name="ibgvfxsub"      />
+
+      <field field_ref="ibgsfx"     grid_ref="grid_1point"  name="ibgsfx"     />
+      <field field_ref="ibgsfxbri"   grid_ref="grid_1point" name="ibgsfxbri"    />
+      <field field_ref="ibgsfxdyn"   grid_ref="grid_1point" name="ibgsfxdyn" />
+      <field field_ref="ibgsfxres"  grid_ref="grid_1point"  name="ibgsfxres" />
+      <field field_ref="ibgsfxbog"  grid_ref="grid_1point"  name="ibgsfxbog"      />
+      <field field_ref="ibgsfxopw"  grid_ref="grid_1point"  name="ibgsfxopw"      />
+      <field field_ref="ibgsfxsni"  grid_ref="grid_1point"  name="ibgsfxsni"      />
+      <field field_ref="ibgsfxbom"  grid_ref="grid_1point"  name="ibgsfxbom"      />
+      <field field_ref="ibgsfxsum"  grid_ref="grid_1point"  name="ibgsfxsum"      />
+
+      <field field_ref="ibghfxdhc"  grid_ref="grid_1point"  name="ibghfxdhc"    />
+      <field field_ref="ibghfxspr"  grid_ref="grid_1point"  name="ibghfxspr"    />
+
+      <field field_ref="ibghfxres" grid_ref="grid_1point"   name="ibghfxres"    />
+      <field field_ref="ibghfxsub"  grid_ref="grid_1point"  name="ibghfxsub"    />
+      <field field_ref="ibghfxdyn"  grid_ref="grid_1point"  name="ibghfxdyn"    />
+      <field field_ref="ibghfxthd"  grid_ref="grid_1point"   name="ibghfxthd"    />
+      <field field_ref="ibghfxsum"  grid_ref="grid_1point"   name="ibghfxsum"    />
+      <field field_ref="ibghfxbom"  grid_ref="grid_1point"   name="ibghfxbom"    />
+      <field field_ref="ibghfxbog"  grid_ref="grid_1point"   name="ibghfxbog"    />
+      <field field_ref="ibghfxdif"  grid_ref="grid_1point"   name="ibghfxdif"    />
+      <field field_ref="ibghfxopw"  grid_ref="grid_1point"   name="ibghfxopw"    />
+      <field field_ref="ibghfxout"  grid_ref="grid_1point"   name="ibghfxout"    />
+      <field field_ref="ibghfxin"   grid_ref="grid_1point"  name="ibghfxin"    />
+      <field field_ref="ibghfxsnw"  grid_ref="grid_1point"   name="ibghfxsnw"    />
+
+      <field field_ref="ibgfrcvol"   grid_ref="grid_1point"  name="ibgfrcvol"   />
+      <field field_ref="ibgfrcsfx"   grid_ref="grid_1point"  name="ibgfrcsfx"  />
+      <field field_ref="ibgvolgrm"   grid_ref="grid_1point"  name="ibgvolgrm"    />
+
+        </file>
+
+	<file id="file10" name_suffix="_diaptr" description="diaptr variables" enabled=".true." >
+	  <field field_ref="zomsfglo"          name="zomsfglo"  grid_ref="grid_ptr_W_3D" />
+          <field field_ref="zomsfatl"          name="zomsfatl"  grid_ref="grid_ptr_W_3D" />
+          <field field_ref="zomsfpac"          name="zomsfpac"  grid_ref="grid_ptr_W_3D" />
+          <field field_ref="zomsfind"          name="zomsfind"  grid_ref="grid_ptr_W_3D" />
+          <field field_ref="zomsfipc"          name="zomsfipc"  grid_ref="grid_ptr_W_3D" />
+          <field field_ref="zotemglo"          name="zotemglo"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zotematl"          name="zotematl"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zotempac"          name="zotempac"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zotemind"          name="zotemind"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zotemipc"          name="zotemipc"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosalglo"          name="zosalglo"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosalatl"          name="zosalatl"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosalpac"          name="zosalpac"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosalind"          name="zosalind"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosalipc"          name="zosalipc"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosrfglo"          name="zosrfglo"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosrfatl"          name="zosrfatl"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosrfpac"          name="zosrfpac"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosrfind"          name="zosrfind"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="zosrfipc"          name="zosrfipc"  grid_ref="grid_ptr_T_3D" />
+          <field field_ref="sophtadv"          name="sophtadv"  grid_ref="grid_ptr_T_2D" />
+          <field field_ref="sophtldf"          name="sophtldf"  grid_ref="grid_ptr_T_2D" />
+          <field field_ref="sopstadv"          name="sopstadv"  grid_ref="grid_ptr_T_2D" />
+          <field field_ref="sopstldf"          name="sopstldf"  grid_ref="grid_ptr_T_2D" />
+        </file>
+
+      </file_group>
+
+
+      <file_group id="2m" output_freq="2mo" output_level="10" enabled=".TRUE."/> <!-- real 2m files -->
+      <file_group id="3m" output_freq="3mo" output_level="10" enabled=".TRUE."/> <!-- real 3m files -->
+      <file_group id="4m" output_freq="4mo" output_level="10" enabled=".TRUE."/> <!-- real 4m files -->
+      <file_group id="6m" output_freq="6mo" output_level="10" enabled=".TRUE."/> <!-- real 6m files -->
+
+      <file_group id="1y"  output_freq="1y" output_level="10" enabled="_AUTO_"> <!-- real yearly files -->
+
+    <file id="file11" name_suffix="_grid_T" description="ocean T grid variables" >
+      <field field_ref="e3t"  />
+      <field field_ref="sst"          name="tos"      long_name="sea_surface_temperature"                       />
+      <field field_ref="sss"          name="sos"      long_name="sea_surface_salinity"                          />
+      <field field_ref="ssh"          name="zos"      long_name="sea_surface_height_above_geoid"                />
+      <field field_ref="toce"         name="thetao"   long_name="sea_water_potential_temperature"      operation="average" freq_op="1y" > @toce_e3t / @e3t </field>        
+      <field field_ref="soce"         name="so"       long_name="sea_water_salinity"                   operation="average" freq_op="1y" > @soce_e3t / @e3t </field>         
+      <field field_ref="sst2"         name="tossq"    long_name="square_of_sea_surface_temperature"             />
+      <field field_ref="ssh2"         name="zossq"    long_name="square_of_sea_surface_height_above_geoid"      />
+      <field field_ref="mldr10_1"     />
+      <field field_ref="mldkz5"       name="omlmax"   long_name="ocean_mixed_layer_thickness_defined_by_mixing_scheme" level="2" operation="maximum" />
+      <field field_ref="erp"          name="wfcorr"   long_name="water_flux_correction"                                   level="1" /> <!-- usually = 0 -->
+      <field field_ref="qns"          name="nshfls"      long_name="surface_net_downward_non_solar_flux"                                         level="1" />
+      <field field_ref="qsr"          name="rsntds"      long_name="surface_net_downward_shortwave_flux"                                         level="1" />
+      <field field_ref="qsr3d"        name="rsds"        long_name="downwelling_shortwave_flux_in_sea_water"                                     level="1" />
+      <field field_ref="qt"           name="tohfls"   long_name="surface_net_downward_total_heat_flux"          />
+      <field field_ref="taum"         name="taum" />
+      <field field_ref="wspd"         name="sowindsp"  />
+      <field field_ref="precip"       name="soprecip" />
+      <!-- available with ln_blk_clio or ln_blk_core -->
+      <field field_ref="qns_oce"      name="sonshdoo"  />
+      <field field_ref="qlw_oce"      name="solwhdoo"  />
+      <field field_ref="qsb_oce"      name="sosehdoo"  />
+      <field field_ref="qla_oce"      name="solahdoo"  />
+      <field field_ref="taum_oce"     name="sowndsto"  />
+      <!-- ice and snow -->
+      <field field_ref="snowpre"      name="isnowpre"/>
+      <field field_ref="utau_ice"     name="iicestru" />
+      <field field_ref="vtau_ice"     name="iicestrv" />
+	  <!-- For heat conservation checking -->
+	  <field field_ref="qt_oce"        name="qt_oce"   long_name="downward total flux at ocean surface"           />
+	  <field field_ref="qemp_oce"      name="qemp_oce" long_name="Downward Heat Flux from E-P over open ocean"           />
+	  <field field_ref="qt_ice"        name="qt_ice"   long_name="downward total flux at ice surface"           />
+	  <field field_ref="qemp_ice"      name="qemp_ice" long_name="Downward Heat Flux from E-P over ice"           />
+	  <field field_ref="hflx_rain_cea" name="hflx_rain_cea"      />
+	  <field field_ref="hflx_evap_cea" name="hflx_evap_cea"      />
+	  <field field_ref="hflx_snow_cea" name="hflx_snow_cea"      />
+	  <field field_ref="hflx_cal_cea"  name="hflx_cal_cea"      />
+	  <!-- For freshwater conservation checking -->
+	  <field field_ref="empmr"         name="wfo"      long_name="water_flux_into_sea_water"                     />
+	  <field field_ref="emp_oce"       name="emp_oce"                      />
+	  <field field_ref="emp_ice"       name="emp_ice"                      />
+          <field field_ref="runoffs"       name="friver"   long_name="water_flux_into_sea_water_from_rivers"                   level="1" />
+	  <field field_ref="calving_cea"   name="calving" />
+	  <field field_ref="vfxice"        name="vfxice" />
+	  <field field_ref="vfxsnw"        name="vfxsnw" />
+	  <field field_ref="vfxsub"        name="vfxsub" />
+	  <field field_ref="vfxspr"        name="vfxspr" />
+	  <field field_ref="rain"          name="rain"      />
+	  <field field_ref="snow_ao_cea"   name="snow_ao_cea"      />
+	  <field field_ref="snow_ai_cea"   name="snow_ai_cea"      />
+	  <field field_ref="evap_ao_cea"   name="evap_ao_cea"      />
+	  <field field_ref="subl_ai_cea"   name="subl_ai_cea"      />
+	  <!-- For salt conservation checking -->
+          <field field_ref="saltflx"      name="sosflxdo"  />
+    </file>
+
+    <file id="file12" name_suffix="_grid_U" description="ocean U grid variables" >
+      <field field_ref="e3u"  />
+      <field field_ref="ssu"          name="uos"     long_name="sea_surface_x_velocity"    />
+      <field field_ref="uoce"         name="uo"      long_name="sea_water_x_velocity"      operation="average" freq_op="1y" > @uoce_e3u / @e3u </field> 
+      <field field_ref="utau"         name="tauuo"   long_name="surface_downward_x_stress" />
+      <field field_ref="uocetr_eff"   name="uocetr_eff"  />
+    </file>
+
+    <file id="file13" name_suffix="_grid_V" description="ocean V grid variables" >
+      <field field_ref="e3v"  />
+      <field field_ref="ssv"          name="vos"     long_name="sea_surface_y_velocity"    />
+      <field field_ref="voce"         name="vo"      long_name="sea_water_y_velocity"     operation="average" freq_op="1y" > @voce_e3v / @e3v </field>
+      <field field_ref="vtau"         name="tauvo"   long_name="surface_downward_y_stress" />
+      <field field_ref="vocetr_eff"   name="vocetr_eff"  />
+    </file>
+
+    <file id="file14" name_suffix="_grid_W" description="ocean W grid variables" >
+      <field field_ref="e3w"  />
+      <field field_ref="woce"         name="wo"      long_name="ocean vertical velocity"         />
+      <field field_ref="avt"          name="difvho"  long_name="ocean_vertical_heat_diffusivity" />
+      <field field_ref="wocetr_eff"   name="wocetr_eff"  />
+      <field field_ref="avt_evd"      name="avt_evd"    />
+      <field field_ref="av_wave"      name="av_wave"    />
+      <field field_ref="bn2"          name="bn2"        />
+      <field field_ref="bflx_tmx"     name="bflx_tmx"   />
+      <field field_ref="pcmap_tmx"    name="pcmap_tmx"  />
+      <field field_ref="emix_tmx"     name="emix_tmx"   />
+      <field field_ref="av_ratio"     name="av_ratio"   />
+    </file>
+
+    <file id="file15" name_suffix="_diaptr" description="diaptr variables" enabled=".TRUE." >
+      <field field_ref="zotemglo" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zosalglo" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zosrfglo" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zomsfglo" grid_ref="grid_ptr_W_3D"  />
+      <field field_ref="zotematl" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zosalatl" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zosrfatl" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zomsfatl" grid_ref="grid_ptr_W_3D"  />
+      <field field_ref="zotempac" grid_ref="grid_ptr_T_3D"   />
+      <field field_ref="zosalpac" grid_ref="grid_ptr_T_3D"  />
+      <field field_ref="zosrfpac" grid_ref="grid_ptr_T_3D"  />
+
+    </file>   
+   </file_group>
+
+      <file_group id="2y"  output_freq="2y" output_level="10" enabled=".TRUE."/> <!-- real 2y files -->
+      <file_group id="5y"  output_freq="5y" output_level="10" enabled=".TRUE."/> <!-- real 5y files -->
+      <file_group id="10y" output_freq="10y" output_level="10" enabled=".TRUE."/> <!-- real 10y files -->
+
+   </file_definition>
+    
+
+
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-pisces.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-pisces.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/file_def_nemo-pisces.xml	(revision 5893)
@@ -0,0 +1,190 @@
+    <!-- $id$ -->
+    
+    <!-- 
+
+============================================================================================================
+=                                           output files definition                                        =
+=                                            Define your own files ocean biogeochemistry                                         =
+=                                         put the variables you want...                                    =
+============================================================================================================
+    -->
+    
+    <file_definition type="one_file" name="@expname@_@freq@" sync_freq="1d" min_digits="4">
+    
+      <file_group id="1ts" output_freq="1ts"  output_level="10" enabled=".TRUE."/> <!-- 1 time step files -->
+
+      <file_group id="1h" output_freq="1h"  output_level="10" enabled=".TRUE."/> <!-- 1h files -->
+
+      <file_group id="2h" output_freq="2h"  output_level="10" enabled=".TRUE."/> <!-- 2h files -->
+
+      <file_group id="3h" output_freq="3h"  output_level="10" enabled=".TRUE."/> <!-- 3h files -->     
+
+      <file_group id="4h" output_freq="4h"  output_level="10" enabled=".TRUE."/> <!-- 4h files -->
+
+      <file_group id="6h" output_freq="6h"  output_level="10" enabled=".TRUE."/> <!-- 6h files -->     
+    
+      <file_group id="1d" output_freq="1d"  output_level="10" enabled="_AUTO_">  <!-- 5d files -->   
+
+        <file id="file17" name_suffix="_bioscalar" description="pisces sms variables" >
+          <field field_ref="tdenit"   name="tdenit"   grid_ref="grid_1point" unit="TgN/yr" operation="instant" > tdenit * 14. * 86400. * 365. / 1e12 </field>
+          <field field_ref="tnfix"    name="tnfix"    grid_ref="grid_1point" unit="TgN/yr" operation="instant" > tnfix * 14. * 86400. * 365. / 1e12 </field>
+          <field field_ref="tcflx"    name="tcflx"    grid_ref="grid_1point" unit="PgC/yr" operation="instant" > tcflx * -1. * 12. * 86400. * 365. / 1e15 </field>
+          <field field_ref="tcflxcum" name="tcflxcum" grid_ref="grid_1point" unit="PgC"    operation="instant" > tcflxcum * -1. * 12. / 1e15 </field>
+          <field field_ref="tcexp"    name="tcexp"    grid_ref="grid_1point" unit="PgC/yr" operation="instant" > tcexp * 12. * 86400. * 365. / 1e15 </field>
+          <field field_ref="tintpp"   name="tintpp"   grid_ref="grid_1point" unit="PgC/yr" operation="instant" > tintpp * 12. * 86400. * 365. / 1e15 </field>
+          <field field_ref="pno3tot"  name="pno3tot"  grid_ref="grid_1point" unit="umolN"  operation="instant" > pno3tot * 16. / 122. * 1e6 </field>
+          <field field_ref="ppo4tot"  name="ppo4tot"  grid_ref="grid_1point" unit="umolP"  operation="instant" > ppo4tot * 1. / 122. * 1e6 </field>
+          <field field_ref="psiltot"  name="psiltot"  grid_ref="grid_1point" unit="umolC"  operation="instant" > psiltot * 1e6  </field>
+          <field field_ref="palktot"  name="palktot"  grid_ref="grid_1point" unit="umolC"  operation="instant" > palktot * 1e6  </field>
+          <field field_ref="pfertot"  name="pfertot"  grid_ref="grid_1point" unit="nmolFe" operation="instant" > pfertot * 1e9  </field>
+        </file>
+
+      </file_group> 
+
+      <file_group id="5d" output_freq="5d"  output_level="10" enabled=".TRUE."/>  <!-- 5d files -->   
+	
+      <file_group id="1m" output_freq="1mo" output_level="10" enabled="_AUTO_"> <!-- real monthly files -->
+
+ 
+       <file id="file18" name_suffix="_ptrc_T" description="pisces sms variables" enabled=".TRUE.">
+          <field field_ref="DIC"       name="DIC"      operation="average" freq_op="1mo" > @DIC_E3T / @e3t </field>
+          <field field_ref="Alkalini"  name="Alkalini" operation="average" freq_op="1mo" > @Alkalini_E3T / @e3t </field>
+          <field field_ref="O2"        name="O2"       operation="average" freq_op="1mo" > @O2_E3T / @e3t </field>
+          <field field_ref="CaCO3"     name="CaCO3"    operation="average" freq_op="1mo" > @CaCO3_E3T / @e3t </field>
+          <field field_ref="PO4"       name="PO4"      operation="average" freq_op="1mo" > @PO4_E3T / @e3t </field>
+          <field field_ref="POC"       name="POC"      operation="average" freq_op="1mo" > @POC_E3T / @e3t </field>
+          <field field_ref="Si"        name="Si"       operation="average" freq_op="1mo" > @Si_E3T / @e3t </field>
+          <field field_ref="PHY"       name="PHY"      operation="average" freq_op="1mo" > @PHY_E3T / @e3t </field>
+          <field field_ref="ZOO"       name="ZOO"      operation="average" freq_op="1mo" > @ZOO_E3T / @e3t </field>
+          <field field_ref="DOC"       name="DOC"      operation="average" freq_op="1mo" > @DOC_E3T / @e3t </field>
+          <field field_ref="PHY2"      name="PHY2"     operation="average" freq_op="1mo" > @PHY2_E3T / @e3t </field>
+          <field field_ref="ZOO2"      name="ZOO2"     operation="average" freq_op="1mo" > @ZOO2_E3T / @e3t </field>
+          <field field_ref="DSi"       name="DSi"      operation="average" freq_op="1mo" > @DSi_E3T / @e3t </field>
+          <field field_ref="Fer"       name="Fer"      operation="average" freq_op="1mo" > @Fer_E3T / @e3t </field>
+          <field field_ref="BFe"       name="BFe"      operation="average" freq_op="1mo" > @BFe_E3T / @e3t </field>
+          <field field_ref="GOC"       name="GOC"      operation="average" freq_op="1mo" > @GOC_E3T / @e3t </field>
+          <field field_ref="SFe"       name="SFe"      operation="average" freq_op="1mo" > @SFe_E3T / @e3t </field>
+          <field field_ref="DFe"       name="DFe"      operation="average" freq_op="1mo" > @DFe_E3T / @e3t </field>
+          <field field_ref="GSi"       name="GSi"      operation="average" freq_op="1mo" > @GSi_E3T / @e3t </field>
+          <field field_ref="NFe"       name="NFe"      operation="average" freq_op="1mo" > @NFe_E3T / @e3t </field>
+          <field field_ref="NCHL"      name="NCHL"     operation="average" freq_op="1mo" > @NCHL_E3T / @e3t </field>
+          <field field_ref="DCHL"      name="DCHL"     operation="average" freq_op="1mo" > @DCHL_E3T / @e3t </field>
+          <field field_ref="NO3"       name="NO3"      operation="average" freq_op="1mo" > @NO3_E3T / @e3t </field>
+          <field field_ref="NH4"       name="NH4"      operation="average" freq_op="1mo" > @NH4_E3T / @e3t </field>
+    </file>
+
+   <file id="file19" name_suffix="_diad_T" description="additional pisces diagnostics" enabled=".TRUE." >
+       <field field_ref="PH"         name="PH" />
+       <field field_ref="PAR"        name="PAR"   />
+       <field field_ref="PARDM"      name="PARDM"   />
+       <field field_ref="Cflx"       name="Cflx"  />
+        <field field_ref="Oflx"      name="Oflx"  />
+       <field field_ref="Dpco2"      name="Dpco2"   />
+       <field field_ref="Dpo2"       name="Dpo2"   />
+        <field field_ref="Heup"      name="Heup"  />
+        <field field_ref="Irondep"   name="Irondep"  />
+        <field field_ref="Ironsed"   name="Ironsed"  />
+        <field field_ref="Nfix"      name="Nfix"  />
+        <field field_ref="LNnut"     name="LNnut"  />
+        <field field_ref="LDnut"     name="LDnut"  />
+        <field field_ref="LNFe"      name="LNFe"  />
+        <field field_ref="LDFe"      name="LDFe"  />
+        <field field_ref="LNlight"   name="LNlight"  />
+        <field field_ref="LDlight"   name="LDlight"  />
+        <field field_ref="TPP"       name="TPP"  />
+       <field field_ref="TPNEW"      name="TPNEW"  />
+        <field field_ref="EPC100"    name="EPC100"  />
+        <field field_ref="EPFE100"   name="EPFE100"  />
+        <field field_ref="EPSI100"   name="EPSI100"  />
+        <field field_ref="EPCAL100"  name="EPCAL100"  />
+        <field field_ref="xfracal"   name="xfracal"  />
+    </file>
+
+
+       <file id="file20" name_suffix="_bioscalar" description="pisces sms variables" >
+          <field field_ref="tdenit"   name="tdenit"   grid_ref="grid_1point" unit="TgN/yr" operation="instant" > tdenit * 14. * 86400. * 365. / 1e12 </field>
+          <field field_ref="tnfix"    name="tnfix"    grid_ref="grid_1point" unit="TgN/yr" operation="instant" > tnfix * 14. * 86400. * 365. / 1e12 </field>
+          <field field_ref="tcflx"    name="tcflx"    grid_ref="grid_1point" unit="PgC/yr" operation="instant" > tcflx * -1. * 12. * 86400. * 365. / 1e15 </field>
+          <field field_ref="tcflxcum" name="tcflxcum" grid_ref="grid_1point" unit="PgC"    operation="instant" > tcflxcum * -1. * 12. / 1e15 </field>
+          <field field_ref="tcexp"    name="tcexp"    grid_ref="grid_1point" unit="PgC/yr" operation="instant" > tcexp * 12. * 86400. * 365. / 1e15 </field>
+          <field field_ref="tintpp"   name="tintpp"   grid_ref="grid_1point" unit="PgC/yr" operation="instant" > tintpp * 12. * 86400. * 365. / 1e15 </field>
+          <field field_ref="pno3tot"  name="pno3tot"  grid_ref="grid_1point" unit="umolN"  operation="instant" > pno3tot * 16. / 122. * 1e6 </field>
+          <field field_ref="ppo4tot"  name="ppo4tot"  grid_ref="grid_1point" unit="umolP"  operation="instant" > ppo4tot * 1. / 122. * 1e6 </field>
+          <field field_ref="psiltot"  name="psiltot"  grid_ref="grid_1point" unit="umolC"  operation="instant" > psiltot * 1e6  </field>
+          <field field_ref="palktot"  name="palktot"  grid_ref="grid_1point" unit="umolC"  operation="instant" > palktot * 1e6  </field>
+          <field field_ref="pfertot"  name="pfertot"  grid_ref="grid_1point" unit="nmolFe" operation="instant" > pfertot * 1e9  </field>
+        </file>
+
+      </file_group>
+
+
+      <file_group id="2m" output_freq="2mo" output_level="10" enabled=".TRUE."/> <!-- real 2m files -->
+      <file_group id="3m" output_freq="3mo" output_level="10" enabled=".TRUE."/> <!-- real 3m files -->
+      <file_group id="4m" output_freq="4mo" output_level="10" enabled=".TRUE."/> <!-- real 4m files -->
+      <file_group id="6m" output_freq="6mo" output_level="10" enabled=".TRUE."/> <!-- real 6m files -->
+
+      <file_group id="1y"  output_freq="1y" output_level="10" enabled="_AUTO_"> <!-- real yearly files -->
+
+ 
+       <file id="file21" name_suffix="_ptrc_T" description="pisces sms variables" enabled=".TRUE.">
+          <field field_ref="DIC"       name="DIC"      operation="average" freq_op="1y" > @DIC_E3T / @e3t </field>
+          <field field_ref="Alkalini"  name="Alkalini" operation="average" freq_op="1y" > @Alkalini_E3T / @e3t </field>
+          <field field_ref="O2"        name="O2"       operation="average" freq_op="1y" > @O2_E3T / @e3t </field>
+          <field field_ref="CaCO3"     name="CaCO3"    operation="average" freq_op="1y" > @CaCO3_E3T / @e3t </field>
+          <field field_ref="PO4"       name="PO4"      operation="average" freq_op="1y" > @PO4_E3T / @e3t </field>
+          <field field_ref="POC"       name="POC"      operation="average" freq_op="1y" > @POC_E3T / @e3t </field>
+          <field field_ref="Si"        name="Si"       operation="average" freq_op="1y" > @Si_E3T / @e3t </field>
+          <field field_ref="PHY"       name="PHY"      operation="average" freq_op="1y" > @PHY_E3T / @e3t </field>
+          <field field_ref="ZOO"       name="ZOO"      operation="average" freq_op="1y" > @ZOO_E3T / @e3t </field>
+          <field field_ref="DOC"       name="DOC"      operation="average" freq_op="1y" > @DOC_E3T / @e3t </field>
+          <field field_ref="PHY2"      name="PHY2"     operation="average" freq_op="1y" > @PHY2_E3T / @e3t </field>
+          <field field_ref="ZOO2"      name="ZOO2"     operation="average" freq_op="1y" > @ZOO2_E3T / @e3t </field>
+          <field field_ref="DSi"       name="DSi"      operation="average" freq_op="1y" > @DSi_E3T / @e3t </field>
+          <field field_ref="Fer"       name="Fer"      operation="average" freq_op="1y" > @Fer_E3T / @e3t </field>
+          <field field_ref="BFe"       name="BFe"      operation="average" freq_op="1y" > @BFe_E3T / @e3t </field>
+          <field field_ref="GOC"       name="GOC"      operation="average" freq_op="1y" > @GOC_E3T / @e3t </field>
+          <field field_ref="SFe"       name="SFe"      operation="average" freq_op="1y" > @SFe_E3T / @e3t </field>
+          <field field_ref="DFe"       name="DFe"      operation="average" freq_op="1y" > @DFe_E3T / @e3t </field>
+          <field field_ref="GSi"       name="GSi"      operation="average" freq_op="1y" > @GSi_E3T / @e3t </field>
+          <field field_ref="NFe"       name="NFe"      operation="average" freq_op="1y" > @NFe_E3T / @e3t </field>
+          <field field_ref="NCHL"      name="NCHL"     operation="average" freq_op="1y" > @NCHL_E3T / @e3t </field>
+          <field field_ref="DCHL"      name="DCHL"     operation="average" freq_op="1y" > @DCHL_E3T / @e3t </field>
+          <field field_ref="NO3"       name="NO3"      operation="average" freq_op="1y" > @NO3_E3T / @e3t </field>
+          <field field_ref="NH4"       name="NH4"      operation="average" freq_op="1y" > @NH4_E3T / @e3t </field>
+    </file>
+
+   <file id="file22" name_suffix="_diad_T" description="additional pisces diagnostics" enabled=".TRUE." >
+       <field field_ref="PH"         name="PH" />
+       <field field_ref="PAR"        name="PAR"   />
+       <field field_ref="PARDM"      name="PARDM"   />
+       <field field_ref="Cflx"       name="Cflx"  />
+        <field field_ref="Oflx"      name="Oflx"  />
+       <field field_ref="Dpco2"      name="Dpco2"   />
+       <field field_ref="Dpo2"       name="Dpo2"   />
+        <field field_ref="Heup"      name="Heup"  />
+        <field field_ref="Irondep"   name="Irondep"  />
+        <field field_ref="Ironsed"   name="Ironsed"  />
+        <field field_ref="Nfix"      name="Nfix"  />
+        <field field_ref="LNnut"     name="LNnut"  />
+        <field field_ref="LDnut"     name="LDnut"  />
+        <field field_ref="LNFe"      name="LNFe"  />
+        <field field_ref="LDFe"      name="LDFe"  />
+        <field field_ref="LNlight"   name="LNlight"  />
+        <field field_ref="LDlight"   name="LDlight"  />
+        <field field_ref="TPP"       name="TPP"  />
+       <field field_ref="TPNEW"      name="TPNEW"  />
+        <field field_ref="EPC100"    name="EPC100"  />
+        <field field_ref="EPFE100"   name="EPFE100"  />
+        <field field_ref="EPSI100"   name="EPSI100"  />
+        <field field_ref="EPCAL100"  name="EPCAL100"  />
+        <field field_ref="xfracal"   name="xfracal"  />
+    </file>
+
+      </file_group>
+
+      <file_group id="2y"  output_freq="2y" output_level="10" enabled=".TRUE."/> <!-- real 2y files -->
+      <file_group id="5y"  output_freq="5y" output_level="10" enabled=".TRUE."/> <!-- real 5y files -->
+      <file_group id="10y" output_freq="10y" output_level="10" enabled=".TRUE."/> <!-- real 10y files -->
+
+   </file_definition>
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/gcm.def_144x142
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/gcm.def_144x142	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/gcm.def_144x142	(revision 5893)
@@ -0,0 +1,57 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+## iphysiq est modifie pour la nouvelle physique par le lmdz.driver pour les autres cas le valeur par defaut est utilise
+iphysiq=_AUTO_ : DEFAULT = 5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/gcm.def_96x95
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/gcm.def_96x95	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/gcm.def_96x95	(revision 5893)
@@ -0,0 +1,48 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+## iphysiq est modifie pour la nouvelle physique par le lmdz.driver pour les autres cas le valeur par defaut est utilise
+iphysiq=_AUTO_ : DEFAULT = 10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/guide.def
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/guide.def	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/guide.def	(revision 5893)
@@ -0,0 +1,16 @@
+# ok_guide=y : guidage active
+ok_guide=_AUTO_ : DEFFAULT = n
+#
+guide_u= y
+guide_v= y
+guide_T= n
+guide_P= n
+guide_Q= n
+
+ini_anal=n
+tau_min_u=0.0208333
+tau_max_u=0.125
+tau_min_v=0.0208333
+tau_max_v=0.125
+#tau_min_T=0.0208333
+#tau_max_T=10
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/inca.def
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/inca.def	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/inca.def	(revision 5893)
@@ -0,0 +1,36 @@
+#######################################################################
+# parametres pour INCA
+#######################################################################
+#LMDZ_10m_winds=y --> use 10m wind from LMDZ, =n --> use 10m wind from output file
+LMDZ_10m_winds=_AUTO_
+10m_winds_method=_AUTO_
+#choose if there is a feedback with the areosol effect
+feedb=_AUTO_
+#indicate if we are running with xios and/or ioipsl
+XIOS_INCA_OK=_AUTO_
+IOIPSL_INCA_OK=_AUTO_
+#weibull 10m wind parameter / def 4
+kref=_AUTO_: DEFAULT =4
+#threshold 10m wind parameter / def 0.78
+tref=_AUTO_: DEFAULT =0.78
+#seasalt_correctif / def = 1 
+ss_corr=_AUTO_: DEFAULT =1 
+#sedimentation 
+multilayer_sediment=_AUTO_
+#coupled model with orchidee
+CoupOrchInca=_AUTO_
+#use or not the deposition from orchidee
+DepOrch=n
+# uncomment two next line if we want to coupled with orchidee without transfer any flux
+#nbFlux_FromOrch=0
+#emi_FromOrch=
+#output diagnostic for chemistry flux
+calcul_flux=_AUTO_
+#
+flag_plume=0
+#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
+flag_plane=_AUTO_
+#choose which time interpolation you want to interpolate sflx file. ( 0 - 1 - 2) (no interpolation / point to point interpolation / Sheng & Zwiers interpolation) 
+emi_interp_time=_AUTO_
+#activate the flag cmip_xml if you are running a CMIP experiment
+cmip_xml=_AUTO_: DEFAULT =n
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/iodef.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/iodef.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/iodef.xml	(revision 5893)
@@ -0,0 +1,39 @@
+<?xml version="1.0"?>
+<!-- =========================================================================================================== -->
+<!-- iodef.xml : Configuration file for production of output files using XIOS                                    -->
+<!--             This file contains the context XIOS.                                                            -->
+<!--             The model components context will be add automatically by the comp.driver                       -->
+<!-- =========================================================================================================== -->
+
+<simulation>
+
+  <!-- =========================================================================================================== -->
+  <!-- XIOS context                                                                                                -->
+  <!-- =========================================================================================================== -->
+  <context id="xios">
+    <variable_definition>
+         <variable_group id="server">
+            <variable id="using_server2" type="bool">true</variable>
+            <variable id="ratio_server2" type="int">50</variable>
+         </variable_group>
+        <variable_group id="buffer">
+            <variable id="optimal_buffer_size" type="string">performance</variable>
+            <variable id="buffer_size_factor" type="double">1.0</variable>
+            <variable id="min_buffer_size" type="int">10000000</variable>
+         </variable_group>
+        <variable_group id="parameters" >
+          <variable id="using_server" type="bool">false</variable>
+          <variable id="info_level" type="int">1</variable>
+          <variable id="print_file" type="bool">false</variable>
+          <variable id="using_oasis" type="bool">false</variable>
+          <variable id="oasis_codes_id" type="string" >LMDZ,oceanx</variable>
+        </variable_group>
+      <variable id="activate_non_distributed_transformation" type="bool">true</variable>
+      <variable id="recv_field_timeout" type="double">3000.0</variable>
+    </variable_definition>
+  </context>
+
+  <!-- =========================================================================================================== -->
+  <!-- COMPONENT CONTEXT : the model components context will be add automatically by the comp.driver               -->
+  
+</simulation>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namcouple_ORCA2xLMD144142
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namcouple_ORCA2xLMD144142	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namcouple_ORCA2xLMD144142	(revision 5893)
@@ -0,0 +1,359 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            25
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  LMDZ oceanx
+ $END
+###############################################################################
+# 
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+  <total_time>
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in debug file : 
+#
+ $NLOGPRT
+   2 <lucia_ok>
+ $END
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted sea surface temperature (o->a 1)
+# 
+O_SSTSST  SISUTESW 1 <freq_coupling>  2  sstoc.nc  <output_mode> 
+182 149 144 143 torc  tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrc SIICECOV 44 <freq_coupling>  2  sstoc.nc <output_mode>
+182 149 144 143 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+#
+LOCTRANS MAPPING 
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce  SIICTEMW 34 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 144 143 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# 
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce  SIICEALW 17 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 144 143 torc  tlmd  LAG=<lag_oce>  
+P  2 P  0
+#
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#  
+############################################################################
+#
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 144 143 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 8 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 <freq_coupling>  1  flxat.nc   <output_mode>
+144 143 182 149 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+###########################################################################
+#
+# Field 9 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 182 149 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+###########################################################################
+#
+# Field 10 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+144 143 182 149 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+##########################################################################
+#
+# Field 11 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 182 149 tlmd    vorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+##########################################################################
+#
+# Field 12 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2  24 <freq_coupling>  1   flxat.nc  <output_mode>
+144 143 182 149 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+##########################################################################
+#
+# Field 13 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 182 149 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+#########################################################################
+# Field 14 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 <freq_coupling>  1    flxat.nc  <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+# 
+#########################################################################
+#
+# Field 15 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+##########################################################################
+#
+# Field 16 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 <freq_coupling>  1   flxat.nc   <output_mode>
+tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+#########################################################################
+#
+# Field 17 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 <freq_coupling>  1   flxat.nc   <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING 
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+##########################################################################
+#
+# Field 18 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 <freq_coupling>  1   flxat.nc   <output_mode>
+tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+##########################################################################
+#
+# Field 19 : Total solar heat flux (a->o 12)
+#
+COQSRMIX O_QsrMix  7 <freq_coupling> 1   flxat.nc  <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+#########################################################################
+#
+# Field 20 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX O_QnsMix 6 <freq_coupling>  1   flxat.nc  <output_mode>
+tlmd    torc   LAG=<lag_atm>
+P  0 P  2
+MAPPING 
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+###########################################################################
+#
+# Field 21 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 <freq_coupling> 1   flxat.nc  <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 22 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 <freq_coupling>  1  flxat.nc  <output_mode>
+tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 23 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 <freq_coupling>  1   flxat.nc  <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+#########################################################################
+#
+# Field 24 : iceberg calving (a->o 17)
+#
+COCALVIN OCalving  36 <freq_coupling>  1 flxat.nc  <output_mode>
+144 143 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calvin.nc src
+#
+#########################################################################
+#
+# Field 25 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 <freq_coupling>  3  flxat.nc   <output_mode>
+144 143 182 149 aone    otot  LAG=<lag_atm> 
+P  0 P  2
+MAPPING CONSERV BLASNEW
+# Interpolation method ou parametres mozaic
+# weights convert from kg/s to kg/m^2/s
+rmp_tlmd_to_torc_MOSAIC_rivflu.nc dst
+# CONSERV
+GLOBAL bfb
+# change units from m/s to kg/s
+1000.0 0
+#
+#########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 <freq_coupling>  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=<lag_atm> 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namcouple_ORCA2xLMD9695
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namcouple_ORCA2xLMD9695	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namcouple_ORCA2xLMD9695	(revision 5893)
@@ -0,0 +1,359 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            25
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  LMDZ oceanx
+ $END
+###############################################################################
+# 
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+  <total_time>
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in debug file : 
+#
+ $NLOGPRT
+   2 <lucia_ok>
+ $END
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted sea surface temperature (o->a 1)
+# 
+O_SSTSST  SISUTESW 1 <freq_coupling>  2  sstoc.nc  <output_mode> 
+182 149 96 96 torc  tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrc SIICECOV 44 <freq_coupling>  2  sstoc.nc <output_mode>
+182 149 96 96 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+#
+LOCTRANS MAPPING 
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce  SIICTEMW 34 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 96 96 torc  tlmd   LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+# 
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce  SIICEALW 17 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 96 96 torc  tlmd  LAG=<lag_oce>  
+P  2 P  0
+#
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 96 96 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 96 96 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#  
+############################################################################
+#
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 <freq_coupling>  2  sstoc.nc  <output_mode>
+182 149 96 96 torc    tlmd  LAG=<lag_oce>
+P  2 P  0
+LOCTRANS MAPPING
+ AVERAGE
+#
+rmp_torc_to_tlmd_MOSAIC.nc src
+#
+#
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 8 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 <freq_coupling>  1  flxat.nc   <output_mode>
+96 96 182 149 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+###########################################################################
+#
+# Field 9 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+96 96 182 149 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+###########################################################################
+#
+# Field 10 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 <freq_coupling>  1  flxat.nc  <output_mode>
+96 96 182 149 tlmd    uorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+##########################################################################
+#
+# Field 11 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+96 96 182 149 tlmd    vorc  LAG=<lag_atm> 
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+##########################################################################
+#
+# Field 12 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+96 96 182 149 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+##########################################################################
+#
+# Field 13 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2  24 <freq_coupling>  1    flxat.nc  <output_mode>
+96 96 182 149 tlmd    vorc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+#
+#########################################################################
+# Field 14 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 <freq_coupling>  1    flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+SCRIPR
+BILINEAR LR SCALAR LATLON 10
+# 
+#########################################################################
+#
+# Field 15 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26 <freq_coupling>  1   flxat.nc   <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+##########################################################################
+#
+# Field 16 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 <freq_coupling>  1   flxat.nc   <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+#########################################################################
+#
+# Field 17 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 <freq_coupling>  1   flxat.nc   <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING 
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+##########################################################################
+#
+# Field 18 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 <freq_coupling>  1   flxat.nc   <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+##########################################################################
+#
+# Field 19 : Total solar heat flux (a->o 12)
+#
+COQSRMIX O_QsrMix  7 <freq_coupling> 1   flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+#########################################################################
+#
+# Field 20 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX O_QnsMix 6 <freq_coupling>  1   flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc   LAG=<lag_atm>
+P  0 P  2
+MAPPING 
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+###########################################################################
+#
+# Field 21 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 <freq_coupling> 1   flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method or mozaic parameters
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 22 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 <freq_coupling>  1  flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+############################################################################
+#
+# Field 23 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 <freq_coupling>  1   flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm>
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC.nc src
+#
+#########################################################################
+#
+# Field 24 : iceberg calving (a->o 17)
+#
+COCALVIN OCalving  36 <freq_coupling>  1  flxat.nc  <output_mode>
+96 96 182 149 tlmd    torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING
+# Interpolation method ou parametres mozaic
+rmp_tlmd_to_torc_MOSAIC_calvin.nc src
+#
+#########################################################################
+#
+# Field 25 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 <freq_coupling>  3  flxat.nc   <output_mode>
+96 96 182 149 aone torc  LAG=<lag_atm> 
+P  0 P  2
+MAPPING CONSERV BLASNEW
+# Interpolation method ou parametres mozaic
+# weights convert from kg/s to kg/m^2/s
+rmp_tlmd_to_torc_MOSAIC_rivflu.nc dst
+# CONSERV
+GLOBAL bfb
+# change units from m/s to kg/s
+1000.0 0
+#
+#########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 <freq_coupling>  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=<lag_atm> 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_ORCA2_cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_ORCA2_cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_ORCA2_cfg	(revision 5893)
@@ -0,0 +1,314 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/OPA  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_ref
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!
+!-----------------------------------------------------------------------
+&namrun        !   parameters of the run
+!-----------------------------------------------------------------------
+   cn_exp      = _AUTOBLOCKER_    !  Experience name
+   nn_it000    = _AUTOBLOCKER_    !  First time step
+   nn_itend    = _AUTOBLOCKER_    !  Last  time step
+   nn_date0    = _AUTOBLOCKER_    !  Date at nit_0000 (format yyyymmdd) used if ln_rstart=F or (ln_rstart=T and nn_rstctl=0 or 1)
+   nn_leapy    = _AUTOBLOCKER_    !  Leap year calendar (1) or not (0)
+   ln_rstart   = _AUTOBLOCKER_    !  start from rest (F) or from a restart file (T)
+   nn_rstctl   = _AUTOBLOCKER_    !  Restart control => activated only if ln_rstart = T
+                           !    = 0 nn_date0 read in namelist ; nn_it000 : read in namelist
+                           !    = 1 nn_date0 read in namelist ; nn_it000 : check consistancy between namelist and restart
+                           !    = 2 nn_date0 read in restart  ; nn_it000 : check consistancy between namelist and restart
+   cn_ocerst_in  = "restartopa"   !  Suffix of ocean restart name (input)
+   cn_ocerst_indir = "."       !  directory from which to read input ocean restarts
+   cn_ocerst_out = "restart"      !  Suffix of ocean restart name (output)
+   cn_ocerst_outdir = "."      !  directory in which to write output ocean restarts
+   nn_istate   =       0   !  Output the initial state (1) or not (0)
+   nn_stock    =  _AUTOBLOCKER_   !  Frequency of creation of a restart file (modulo referenced to 1)
+   nn_write    =    5475   !  Requency of write in the output file   (modulo referenced to nn_it000)
+   ln_mskland  = .true.    !  Masks land points in NetCDF outputs
+   ln_dimgnnn  = .false.   !  DIMG file format: 1 file for all processors (F) or by processor (T)
+   ln_cfmeta   = .true.   !  output additional data to netCDF files required for compliance with the CF metadata standard
+   ln_clobber  = .true.    !  clobber (overwrite) an existing file
+   nn_chunksz  =       0   !  chunksize (bytes) for NetCDF file (works only with iom_nf90 routines)
+/
+!-----------------------------------------------------------------------
+&namcfg        !   parameters of the configuration
+!-----------------------------------------------------------------------
+   cp_cfg      =  "orca"               !  name of the configuration
+   jp_cfg      =       2               !  resolution of the configuration
+   jpidta      =     182               !  1st lateral dimension ( >= jpi )
+   jpjdta      =     149               !  2nd    "         "    ( >= jpj )
+   jpkdta      =      31               !  number of levels      ( >= jpk )
+   jpiglo      =     182               !  1st dimension of global domain --> i =jpidta
+   jpjglo      =     149               !  2nd    -                  -    --> j  =jpjdta
+   jpizoom     =       1               !  left bottom (i,j) indices of the zoom
+   jpjzoom     =       1               !  in data domain indices
+   jperio      =       4               !  lateral cond. type (between 0 and 6)
+/
+!-----------------------------------------------------------------------
+&namzgr        !   vertical coordinate
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdom        !   space and time domain (bathymetry, mesh, timestep)
+!-----------------------------------------------------------------------
+   nn_msh      =    _AUTO_ !  AUTO - create (=1) a mesh file or not (=0)
+   rn_rdt      = 5760.     !  time step for the dynamics (and tracer if nn_acc=0)
+   nn_closea    =   1      !  remove (=0) or keep (=1) closed seas and lakes (ORCA)
+   !
+   jphgr_msh   =       0               !  type of horizontal mesh
+   ppglam0     =  999999.0             !  longitude of first raw and column T-point (jphgr_msh = 1)
+   ppgphi0     =  999999.0             ! latitude  of first raw and column T-point (jphgr_msh = 1)
+   ppe1_deg    =  999999.0             !  zonal      grid-spacing (degrees)
+   ppe2_deg    =  999999.0             !  meridional grid-spacing (degrees)
+   ppe1_m      =  999999.0             !  zonal      grid-spacing (degrees)
+   ppe2_m      =  999999.0             !  meridional grid-spacing (degrees)
+   ppsur       =   -4762.96143546300   !  ORCA r4, r2 and r05 coefficients
+   ppa0        =     255.58049070440   ! (default coefficients)
+   ppa1        =     245.58132232490   !
+   ppkth       =      21.43336197938   !
+   ppacr       =       3.0             !
+   ppdzmin     =  999999.              !  Minimum vertical spacing
+   pphmax      =  999999.              !  Maximum depth
+   ldbletanh   =  .FALSE.              !  Use/do not use double tanf function for vertical coordinates
+   ppa2        =  999999.              !  Double tanh function parameters
+   ppkth2      =  999999.              !
+   ppacr2      =  999999.              !
+/
+!-----------------------------------------------------------------------
+&namsplit      !   time splitting parameters                            ("key_dynspg_ts")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namcrs        !   Grid coarsening for dynamics output and/or
+               !   passive tracer coarsened online simulations
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtsd    !   data : Temperature  & Salinity
+!-----------------------------------------------------------------------
+   ln_tsd_init   = .true.   !  Initialisation of ocean T & S with T &S input data (T) or not (F)
+   ln_tsd_tradmp = .false.  !  damping of ocean T & S toward T &S input data (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namsbc        !   Surface Boundary Condition (surface module)
+!-----------------------------------------------------------------------
+   nn_fsbc     = 5         !  frequency of surface boundary condition computation
+                           !     (also = the frequency of sea-ice model call)
+   ln_blk_clio = .false.   !  CLIO bulk formulation                     (T => fill namsbc_clio)
+   ln_blk_core = .false.   !  CORE bulk formulation                     (T => fill namsbc_core)
+   ln_blk_mfs  = .false.   !  MFS bulk formulation                      (T => fill namsbc_mfs )
+   ln_cpl      = .true.    !  atmosphere coupled   formulation          ( requires key_oasis3 )
+   ln_mixcpl   = .false.   !  forced-coupled mixed formulation          ( requires key_oasis3 )
+   ln_apr_dyn  = .false.   !  Patm gradient added in ocean & ice Eqs.   (T => fill namsbc_apr )
+   nn_ice      = 2         !  =0 no ice boundary condition   ,
+                           !  =1 use observed ice-cover      ,
+                           !  =2 ice-model used                         ("key_lim3" or "key_lim2")
+   nn_ice_embd = 0         !  AUTO - 
+                           !  =0 levitating ice (no mass exchange, concentration/dilution effect)
+                           !  =1 levitating ice with mass and salt exchange but no presure effect
+                           !  =2 embedded sea-ice (full salt and mass exchanges and pressure)
+   ln_dm2dc    = .false.   !  daily mean to diurnal cycle on short wave
+   ln_rnf      = .false.   !  runoffs                                   (T => fill namsbc_rnf)
+   ln_ssr      = .false.   !  Sea Surface Restoring on T and/or S       (T => fill namsbc_ssr)
+   nn_fwb      = 0         !  FreshWater Budget: =0 unchecked
+                           !     =1 global mean of e-p-r set to zero at each time step
+                           !     =2 annual global mean of e-p-r set to zero
+                           !     =3 global emp set to zero and spread out over erp area
+   ln_wave = .false.       !  Activate coupling with wave (either Stokes Drift or Drag coefficient, or both)  (T => fill namsbc_wave)
+   ln_cdgw = .false.       !  Neutral drag coefficient read from wave model (T => fill namsbc_wave)
+   ln_sdw  = .false.       !  Computation of 3D stokes drift                (T => fill namsbc_wave)
+/
+!-----------------------------------------------------------------------
+&namsbc_core   !   namsbc_core  CORE bulk formulae
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_qsr    !   penetrative solar radiation
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_chl      = 'chlorophyll_surface.nc',        -1         , 'CHLA'    ,   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+/
+!-----------------------------------------------------------------------
+&namsbc_rnf    !   runoffs namelist surface boundary condition
+!-----------------------------------------------------------------------
+!              !  file name           ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                      !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_rnf      = 'ORCA_R2_runoff_clim_v1.0_nomask',        -1         , 'sorunoff',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_cnf      = 'ORCA_R2_runoff_clim_v1.0_nomask',         0         , 'socoeff' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+   sn_s_rnf    = 'runoffs'                        ,        24         , 'rosaline',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_t_rnf    = 'runoffs'                        ,        24         , 'rotemper',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_dep_rnf  = 'runoffs_ORCA2_depths.nc'        ,         0         , 'rodepth' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+
+   ln_rnf_mouth = .false.    !  specific treatment at rivers mouths
+   ln_rnf_depth = .true.     !  read in depth information for runoff
+   ln_rnf_tem   = .false.    !  read in temperature information for runoff
+   ln_rnf_sal   = .false.    !  read in salinity information for runoff
+   ln_rnf_depth_ini = .true. !  compute depth at initialisation from runoff file
+   rn_rnf_max   = 0.05       !  max value of the runoff climatology over global domain ( if ln_rnf_depth_ini = .true )
+   rn_dep_max = 150.         !  depth over which runoffs is spread ( ln_rnf_depth_ini = .true )
+   nn_rnf_depth_file = _AUTO_     ! create (=1) a runoff depth file or not (=0)
+/
+!-----------------------------------------------------------------------
+&namsbc_ssr    !   surface boundary condition : sea surface restoring
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namsbc_alb    !   albedo parameters
+!-----------------------------------------------------------------------
+   nn_ice_alb  =    0   !  parameterization of ice/snow albedo
+                        !     0: Shine & Henderson-Sellers (JGR 1985)
+                        !     1: "home made" based on Brandt et al. (J. Climate 2005)
+                        !                         and Grenfell & Perovich (JGR 2004)
+   rn_albice   =  0.5   !  albedo of bare puddled ice (values from 0.49 to 0.58)
+                        !     0.53 (default) => if nn_ice_alb=0
+                        !     0.50 (default) => if nn_ice_alb=1
+/
+!-----------------------------------------------------------------------
+&namsbc_cpl    !   coupling parameters
+!-----------------------------------------------------------------------
+!                    !     description       !  multiple  !    vector   !      vector          ! vector !
+!                    !                       ! categories !  reference  !    orientation       ! grids  !
+! send
+sn_snd_temp   =       'weighted oce and ice' ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_alb    =       'weighted ice'         ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_thick  =       'none'                 ,    'no'    ,     ''      ,         ''           ,   ''
+sn_snd_crt    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward' ,  'T'
+sn_snd_co2    =       'none'              ,    'no'    ,     ''      ,         ''           ,   ''
+! receive
+sn_rcv_w10m   =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_taumod =       'none'                 ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_tau    =       'mixed oce-ice'        ,    'no'    , 'cartesian' , 'eastward-northward',  'U,V'
+sn_rcv_dqnsdt =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_qsr    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_qns    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_emp    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_rnf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_cal    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+sn_rcv_co2    =       'none'              ,    'no'    ,     ''      ,         ''          ,   ''
+/
+/
+!-----------------------------------------------------------------------
+&namberg       !   iceberg parameters
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namlbc        !   lateral momentum boundary condition
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namcla        !   cross land advection
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nambfr        !   bottom friction
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nambbc        !   bottom temperature boundary condition
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nambbl        !   bottom boundary layer scheme
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nameos        !   ocean physical parameters
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_adv    !   advection scheme for tracer
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_adv_mle !  mixed layer eddy parametrisation (Fox-Kemper param)
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_adv_mle !  mixed layer eddy parametrisation (Fox-Kemper param)
+!-----------------------------------------------------------------------
+/
+!----------------------------------------------------------------------------------
+&namtra_ldf    !   lateral diffusion scheme for tracers
+!----------------------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtra_dmp    !   tracer: T & S newtonian damping
+!-----------------------------------------------------------------------
+   ln_tradmp   =  .false.  !  add a damping termn (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namdyn_adv    !   formulation of the momentum advection
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_vor    !   option of physics/algorithm (not control by CPP keys)
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_hpg    !   Hydrostatic pressure gradient option
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_ldf    !   lateral diffusion on momentum
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf        !   vertical physics
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tke    !   turbulent eddy kinetic dependent vertical diffusion  ("key_zdftke")
+!-----------------------------------------------------------------------
+   rn_ebb      =  67.83    !  coef. of the surface input of tke (=67.83 suggested when ln_mxl0=T)
+   rn_mxl0     =   0.01    !  surface  buoyancy lenght scale minimum value
+   nn_etau     =   0       !  penetration of tke below the mixed layer (ML) due to internal & intertial waves
+                           !        = 0 no penetration
+                           !        = 1 add a tke source below the ML
+                           !        = 2 add a tke source just at the base of the ML
+                           !        = 3 as = 1 applied on HF part of the stress    ("key_coupled")
+/
+!-----------------------------------------------------------------------
+&namzdf_ddm    !   double diffusive mixing parameterization             ("key_zdfddm")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx    !   tidal mixing parameterization                        ("key_zdftmx")
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namsol        !   elliptic solver / island / free surface
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&nammpp        !   Massively Parallel Processing                        ("key_mpp_mpi)
+!-----------------------------------------------------------------------
+   cn_mpi_send =  'I'      !  mpi send/recieve type   ='S', 'B', or 'I' for standard send,
+                           !  buffer blocking send or immediate non-blocking sends, resp.
+   nn_buffer   =   0       !  size in bytes of exported buffer ('B' case), 0 no exportation
+   ln_nnogather=  .false.  !  activate code to avoid mpi_allgather use at the northfold
+   jpni        =   3       !  jpni   number of processors following i (set automatically if < 1)
+   jpnj        =  15       !  jpnj   number of processors following j (set automatically if < 1)
+   jpnij       =  45       !  jpnij  number of local domains (set automatically if < 1)
+/
+!-----------------------------------------------------------------------
+&namctl        !   Control prints & Benchmark
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namptr       !   Poleward Transport Diagnostic
+!-----------------------------------------------------------------------
+   ln_diaptr  = .true.     !  Poleward heat and salt transport (T) or not (F)
+   ln_subbas  = .true.     !  Atlantic/Pacific/Indian basins computation (T) or not
+                           !  (orca configuration only, need input basins mask file named "subbasins.nc"
+/
+!-----------------------------------------------------------------------
+&nam_asminc   !   assimilation increments                               ('key_asminc')
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namhsb       !  Heat and salt budgets
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namdyn_nept  !   Neptune effect (simplified: lateral and vertical diffusions removed)
+!-----------------------------------------------------------------------
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_lim2_ORCA2_cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_lim2_ORCA2_cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_lim2_ORCA2_cfg	(revision 5893)
@@ -0,0 +1,31 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/LIM-2 : Ice configuration namelist. Overwrites SHARED/namelist_ice_lim2_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
+!-----------------------------------------------------------------------
+&namicerun     !   Share parameters for dynamics/advection/thermo
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namiceini     !   ice initialisation
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namicedyn     !   ice dynamic
+!-----------------------------------------------------------------------
+	rn_creepl   =   2.0e-08 !  creep limit
+/
+!-----------------------------------------------------------------------
+&namicetrp     !   ice transport
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namicethd     !   ice thermodynamic
+!-----------------------------------------------------------------------
+      parsub      = 0.0       !  switch for snow sublimation or not
+/
+!-----------------------------------------------------------------------
+&namice_dmp    !   damping of sea ice alone open boundaries
+!              !   (hard coded damping area: check if it fit your config)
+!-----------------------------------------------------------------------
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_lim2_ref
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_lim2_ref	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_lim2_ref	(revision 5893)
@@ -0,0 +1,131 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/LIM-2 : 1 - dynamics/advection/thermo          (namicerun)
+!! namelists    2 - ice intialisation                  (namiceini)
+!!              3 - ice dynamic                        (namicedyn)
+!!              4 - ice advection                      (namicetrp)
+!!              5 - thermodynamic                      (namicethd)
+!!              6 - ice damping                        (namice_dmp)
+!!              7 - ice diagnostics                    (namicedia)
+!!              8 - ice outputs                        (namiceout)
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
+!-----------------------------------------------------------------------
+&namicerun     !   Share parameters for dynamics/advection/thermo
+!-----------------------------------------------------------------------
+   cn_icerst_in  = "restart_ice_in"   !  suffix of ice restart name (input)
+   cn_icerst_indir = "."              !  directory from which to read input ice restarts
+   cn_icerst_out = "restart_ice"      !  suffix of ice restart name (output)
+   cn_icerst_outdir = "."             !  directory in which to write output ice restarts
+   ln_limdyn     = .true.             !  ice dynamics (T) or thermodynamics only (F)
+   ln_limdmp     = .false.            !  restoring ice thickness and fraction leads   (T => fill  namice_dmp)
+   acrit         = 1.0e-06 , 1.0e-06  !  minimum lead fraction in the Northern & Southern Hemispheres
+   hsndif        =  0.e0              !  computation of temperature in snow (=0.0) or not
+   hicdif        =  0.e0              !  computation of temperature in ice  (=0.0) or not (=9999.0)
+/
+!-----------------------------------------------------------------------
+&namiceini     !   ice initialisation
+!-----------------------------------------------------------------------
+   ln_limini   = .false.   !  read the initial state in 'Ice_initialization.nc' (T) or not (F)
+   ttest       =  2.0      !  threshold water temperature for initial sea ice
+   hninn       =  0.5      !  initial snow thickness in the north
+   hginn       =  3.0      !  initial ice  thickness in the north
+   alinn       =  0.05     !  initial leads area     in the north
+   hnins       =  0.1      !  same  three parameter  in the south
+   hgins       =  1.0      !        "                 "     south   
+   alins       =  0.1      !        "                 "     south
+/
+!-----------------------------------------------------------------------
+&namicedyn     !   ice dynamic
+!-----------------------------------------------------------------------
+   epsd        =   1.0e-20 !  tolerance parameter
+   alpha       =   0.5     !  coefficient for semi-implicit coriolis
+   dm          =   0.6e+03 !  diffusion constant for dynamics
+   nbiter      =   1       !  number of sub-time steps for relaxation
+   nbitdr      = 100       !  maximum number of iterations for relaxation
+   om          =   0.5     !  relaxation constant 
+   resl        =   5.0e-05 !  maximum value for the residual of relaxation
+   cw          =   5.0e-03 !  drag coefficient for oceanic stress
+   angvg       =   0.0     !  turning angle for oceanic stress
+   pstar       =   1.0e+04 !  1st bulk-rheology parameter
+   c_rhg       =  20.0     !  2nd bulk-rhelogy parameter
+   etamn       =   0.0e+07 !  minimun value for viscosity
+   rn_creepl   =   1.0e-08 !  creep limit
+   rn_ecc      =   2.0     !  eccentricity of the elliptical yield curve
+   ahi0        = 350.e0    !  horizontal eddy diffusivity coefficient for sea-ice [m2/s]
+   nn_nevp     =   120     !  number of EVP subcycling iterations
+   telast      =   9600    !  timescale for EVP elastic waves
+   alphaevp    =   1.0     !  coefficient for the solution of EVP int. stresses
+/
+!-----------------------------------------------------------------------
+&namicetrp     !   ice transport
+!-----------------------------------------------------------------------
+   bound       =   0.0     !  boundary conditions (=0. no-slip, =1. free-slip)
+/
+!-----------------------------------------------------------------------
+&namicethd     !   ice thermodynamic
+!-----------------------------------------------------------------------
+   hmelt       = -0.15     !  maximum melting at the bottom
+   hiccrit     = 0.3 , 0.3 !  ice thickness for lateral accretion in the Northern (Southern) Hemisphere
+   !                       !  (caution 1.0, 1.0 best value to be used!!! (gilles G.))
+   hicmin      = 0.2       !  ice thickness corr. to max. energy stored in brine pocket
+   hiclim      = 0.05      !  minimum ice thickness
+   amax        = 0.999     !  maximum lead fraction
+   swiqst      = 1.        !  energy stored in brine pocket (=1) or not (=0)	
+   sbeta       = 1.        !  numerical caracteritic of the scheme for diffusion in ice
+                           !        Cranck-Nicholson (=0.5), implicit (=1), explicit (=0)
+   parlat      = 0.0       !  percentage of energy used for lateral ablation
+   hakspl      = 0.5       !  slope of distr. for Hakkinen-Mellor's lateral melting
+   hibspl      = 0.5       !  slope of distribution for Hibler's lateral melting
+   exld        = 2.0       !  exponent for leads-closure rate
+   hakdif      = 1.0       !  coefficient for diffusions of ice and snow
+   thth        = 0.2       !  threshold thickness for comp. of eq. thermal conductivity
+   hnzst       = 0.1       !  thickness of the surf. layer in temp. computation
+   parsub      = 1.0       !  switch for snow sublimation or not
+   alphs       = 1.0       !  coefficient for snow density when snow ice formation
+/
+!-----------------------------------------------------------------------
+&namice_dmp    !   damping of sea ice alone open boundaries
+!              !   (hard coded damping area: check if it fit your config)
+!-----------------------------------------------------------------------
+!              !  file name     ! frequency (hours) ! variable ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                !  (if <0  months)  !   name   !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_hicif    = 'ice_damping'  ,  -1.              , 'hicif'  ,   .true.     , .true. , 'yearly'  , ''       , ''       ,    ''
+   sn_frld     = 'ice_damping'  ,  -1.              , 'frld'   ,   .true.     , .true. , 'yearly'  , ''       , ''       ,    ''
+!
+   cn_dir      = './'      !  root directory for the location of the runoff files
+/
+!-----------------------------------------------------------------------
+&namicedia     !   ice diagnostics
+!-----------------------------------------------------------------------
+   fmtinf      = '1PE13.5' !  format of the output values
+   nfrinf      =  4        !  number of variables written in one line
+   ntmoy       =  1        !  instantaneous values of ice evolution or averaging
+   ninfo       =  1        !  frequency of ouputs on file ice_evolu in case of averaging
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namiceout     !   parameters for outputs
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !         title of the field           !  name     !   units   !  save  ! multipl. ! additive !
+!              !                                      !           !           ! or not !  factor  !  factor  !
+   field_1     = 'Snow thickness                     ', 'isnowthi', 'm       ',    1   ,  1.0     ,    0.0
+   field_2     = 'Ice thickness                      ', 'iicethic', 'm       ',    1   ,  1.0     ,    0.0
+   field_3     = 'Ice produced                       ', 'iiceprod', 'm/kt    ',    1   ,  1.0     ,    0.0
+   field_4     = 'Ice concentration                  ', 'ileadfra', '%       ',    1   , -1.0     ,    1.0
+   field_5     = 'Ice temperature                    ', 'iicetemp', 'C       ',    1   ,  1.0     , -273.15
+   field_6     = 'Oceanic flux at the ice base       ', 'ioceflxb', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_7     = 'Ice velocity u                     ', 'iicevelu', 'm/s     ',    1   ,  1.0     ,    0.0
+   field_8     = 'Ice velocity v                     ', 'iicevelv', 'm/s     ',    1   ,  1.0     ,    0.0
+   field_9     = 'Sea surface temperature            ', 'isstempe', 'C       ',    1   ,  1.0     , -273.15
+   field_10    = 'Sea surface salinity               ', 'isssalin', 'PSU     ',    1   ,  1.0     ,    0.0
+   field_11    = 'Total flux at ocean surface        ', 'iocetflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_12    = 'Solar flux at ocean surface        ', 'iocesflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_13    = 'Non-solar flux at ocean surface    ', 'iocwnsfl', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_14    = 'Salt flux at ocean surface         ', 'iocesafl', 'kg/m2/kt',    1   ,  1.0     ,    0.0
+   field_15    = 'Wind stress u                      ', 'iocestru', 'Pa      ',    1   ,  1.0     ,    0.0
+   field_16    = 'Wind stress v                      ', 'iocestrv', 'Pa      ',    1   ,  1.0     ,    0.0 
+   field_17    = 'Solar flux at ice/ocean surface    ', 'iicesflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_18    = 'Non-solar flux at ice/ocean surface', 'iicenflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_19    = 'Snow precipitation                 ', 'isnowpre', 'kg/day  ',    1   ,  1.0     ,    0.0
+!
+   noumef      =   19      !  number of fields
+/      
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_pisces_ORCA2_cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_pisces_ORCA2_cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_pisces_ORCA2_cfg	(revision 5893)
@@ -0,0 +1,66 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! PISCES  :   Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_pis_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisext     !   air-sea exchange
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_co2int  =  .false.        ! AUTO - read atm pco2 from a file (T) or constant (F)
+   atcco2     = 0.36886500E+03  ! AUTO - atmospheric pCO2
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisatm     !  Atmospheric pressure 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisbio     !   biological parameters
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampislim     !   parameters for nutrient limitations
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisopt     !   parameters for optics
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/ 
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisprod     !   parameters for phytoplankton growth
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismort     !   parameters for phytoplankton sinks
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismes     !   parameters for mesozooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiszoo     !   parameters for microzooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisfer     !   parameters for iron chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/  
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisrem     !   parameters for remineralization
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiscal     !   parameters for Calcite chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampissbc     !   parameters for inputs deposition
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdmp     !  Damping 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   nn_pisdmp   =  _AUTO_: DEFAULT=8760       !  Frequency of Relaxation
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismass     !  Mass conservation
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_pisces_ref
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_pisces_ref	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_pisces_ref	(revision 5893)
@@ -0,0 +1,413 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! PISCES  (key_pisces) reference namelist (see below for key_pisces_reduced)
+!!              1  - air-sea exchange                         (nampisext)
+!!              2  - biological parameters                    (nampisbio)
+!!              3  - parameters for nutrient limitations      (nampislim)    
+!!              4  - parameters for phytoplankton             (nampisprod,nampismort)
+!!              5  - parameters for zooplankton               (nampismes,nampiszoo)
+!!              6  - parameters for remineralization          (nampisrem)
+!!              7  - parameters for calcite chemistry         (nampiscal)
+!!              8  - parameters for inputs deposition         (nampissed)
+!!              9  - parameters for Kriest parameterization   (nampiskrp, nampiskrs)
+!!              10 - additional 2D/3D  diagnostics            (nampisdia)
+!!              11 - Damping                                  (nampisdmp)
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisext     !   air-sea exchange
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_co2int  =  .false. ! read atm pco2 from a file (T) or constant (F)
+   atcco2     =  280.    ! Constant value atmospheric pCO2 - ln_co2int = F
+   clname     =  'atcco2.txt'  ! Name of atm pCO2 file - ln_co2int = T
+   nn_offset  =  0       ! Offset model-data start year - ln_co2int = T
+!                        ! If your model year is iyy, nn_offset=(years(1)-iyy) 
+!                        ! then the first atmospheric CO2 record read is at years(1)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisatm     !  Atmospheric prrssure 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name   ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !              !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_patm     = 'presatm'    ,     -1            , 'patm'    ,  .true.      , .true. , 'yearly'  , ''       , ''       , ''
+   cn_dir      = './'     !  root directory for the location of the dynamical files
+!
+   ln_presatm  = .false.   ! constant atmopsheric pressure (F) or from a file (T)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisbio     !   biological parameters
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   nrdttrc    =  1        ! time step frequency for biology
+   wsbio      =  2.       ! POC sinking speed
+   xkmort     =  2.E-7    ! half saturation constant for mortality
+   ferat3     =  10.E-6   ! Fe/C in zooplankton 
+   wsbio2     =  30.      ! Big particles sinking speed
+   niter1max  =  1        ! Maximum number of iterations for POC
+   niter2max  =  1        ! Maximum number of iterations for GOC
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampislim     !   parameters for nutrient limitations
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   concnno3   =  1.e-6    ! Nitrate half saturation of nanophytoplankton
+   concdno3   =  3.E-6    ! Nitrate half saturation for diatoms
+   concnnh4   =  1.E-7    ! NH4 half saturation for phyto
+   concdnh4   =  3.E-7    ! NH4 half saturation for diatoms
+   concnfer   =  1.E-9    ! Iron half saturation for phyto
+   concdfer   =  3.E-9    ! Iron half saturation for diatoms
+   concbfe    =  1.E-11   ! Iron half-saturation for DOC remin.
+   concbnh4   =  2.E-8    ! NH4 half saturation for DOC remin.
+   concbno3   =  2.E-7    ! Nitrate half saturation for DOC remin.
+   xsizedia   =  1.E-6    ! Minimum size criteria for diatoms
+   xsizephy   =  1.E-6    ! Minimum size criteria for phyto
+   xsizern    =  3.0      ! Size ratio for nanophytoplankton
+   xsizerd    =  3.0      ! Size ratio for diatoms
+   xksi1      =  2.E-6    ! half saturation constant for Si uptake
+   xksi2      =  20E-6    ! half saturation constant for Si/C
+   xkdoc      =  417.E-6  ! half-saturation constant of DOC remineralization
+   qnfelim    =  7.E-6    ! Optimal quota of phyto
+   qdfelim    =  7.E-6    ! Optimal quota of diatoms
+   caco3r     =  0.3      ! mean rain ratio
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisopt     !   parameters for optics
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name       ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                  !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_par      = 'par.orca'       ,     24            , 'fr_par'  ,  .true.      , .true. , 'yearly'  , ''       , ''       , ''
+   cn_dir      = './'      !  root directory for the location of the dynamical files
+   ln_varpar   =  .true.   ! boolean for PAR variable
+   parlux      =  0.43      ! Fraction of shortwave as PAR
+/ 
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisprod     !   parameters for phytoplankton growth
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   pislope    =  2.       ! P-I slope
+   pislope2   =  2.       ! P-I slope  for diatoms
+   xadap      =  0.       ! Adaptation factor to low light
+   excret     =  0.05     ! excretion ratio of phytoplankton
+   excret2    =  0.05     ! excretion ratio of diatoms
+   ln_newprod =  .true.   ! Enable new parame. of production (T/F) 
+   bresp      =  0.033    ! Basal respiration rate
+   chlcnm     =  0.033    ! Maximum Chl/C in nanophytoplankton
+   chlcdm     =  0.05     ! Maximum Chl/C in diatoms
+   chlcmin    =  0.004    ! Minimum Chl/c in phytoplankton
+   fecnm      =  40E-6    ! Maximum Fe/C in nanophytoplankton
+   fecdm      =  40E-6    ! Maximum Fe/C in diatoms
+   grosip     =  0.159    ! mean Si/C ratio
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismort     !   parameters for phytoplankton sinks
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   wchl       =  0.01    ! quadratic mortality of phytoplankton
+   wchld      =  0.01     ! maximum quadratic mortality of diatoms
+   wchldm     =  0.03     ! maximum quadratic mortality of diatoms
+   mprat      =  0.01     ! phytoplankton mortality rate
+   mprat2     =  0.01     ! Diatoms mortality rate
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismes     !   parameters for mesozooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   part2      =  0.75     ! part of calcite not dissolved in mesozoo guts
+   grazrat2   =  0.75     ! maximal mesozoo grazing rate
+   resrat2    =  0.005    ! exsudation rate of mesozooplankton
+   mzrat2     =  0.03     ! mesozooplankton mortality rate
+   xprefc     =  1.       ! mesozoo preference for diatoms
+   xprefp     =  0.3      ! mesozoo preference for nanophyto.
+   xprefz     =  1.       ! mesozoo preference for microzoo.
+   xprefpoc   =  0.3      ! mesozoo preference for poc
+   xthresh2zoo = 1E-8     ! zoo feeding threshold for mesozooplankton 
+   xthresh2dia = 1E-8     ! diatoms feeding threshold for mesozooplankton 
+   xthresh2phy = 1E-8     ! nanophyto feeding threshold for mesozooplankton 
+   xthresh2poc = 1E-8     ! poc feeding threshold for mesozooplankton 
+   xthresh2   =  3E-7     ! Food threshold for grazing
+   xkgraz2    =  20.E-6   ! half saturation constant for meso grazing
+   epsher2    =  0.35     ! Efficicency of Mesozoo growth
+   sigma2     =  0.6      ! Fraction of mesozoo excretion as DOM
+   unass2     =  0.3      ! non assimilated fraction of P by mesozoo
+   grazflux   =  2.e3     ! flux-feeding rate
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiszoo     !   parameters for microzooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   part       =  0.5      ! part of calcite not dissolved in microzoo gutsa
+   grazrat    =  3.0      ! maximal zoo grazing rate
+   resrat     =  0.03     ! exsudation rate of zooplankton
+   mzrat      =  0.004    ! zooplankton mortality rate
+   xpref2c    =  0.1      ! Microzoo preference for POM
+   xpref2p    =  1.       ! Microzoo preference for Nanophyto
+   xpref2d    =  0.5      ! Microzoo preference for Diatoms
+   xthreshdia =  1.E-8    ! Diatoms feeding threshold for microzooplankton 
+   xthreshphy =  1.E-8    ! Nanophyto feeding threshold for microzooplankton 
+   xthreshpoc =  1.E-8    ! POC feeding threshold for microzooplankton 
+   xthresh    =  3.E-7    ! Food threshold for feeding
+   xkgraz     =  20.E-6   ! half sturation constant for grazing
+   epsher     =  0.3      ! Efficiency of microzoo growth
+   sigma1     =  0.6      ! Fraction of microzoo excretion as DOM
+   unass      =  0.3      ! non assimilated fraction of phyto by zoo
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisfer     !   parameters for iron chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_fechem =  .false.   ! complex iron chemistry ( T/F )
+   ln_ligvar =  .false.   ! variable ligand concentration
+   xlam1     =  0.005     ! scavenging rate of Iron
+   xlamdust  =  150.0     ! Scavenging rate of dust
+   ligand    =  0.6E-9    ! Ligands concentration 
+/  
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisrem     !   parameters for remineralization
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xremik    =  0.3       ! remineralization rate of DOC
+   xremip    =  0.025     ! remineralisation rate of POC
+   nitrif    =  0.05      ! NH4 nitrification rate
+   xsirem    =  0.003     ! remineralization rate of Si
+   xsiremlab =  0.03      ! fast remineralization rate of Si
+   xsilab    =  0.5       ! Fraction of labile biogenic silica
+   oxymin    =  1.E-6     ! Half-saturation constant for anoxia
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiscal     !   parameters for Calcite chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   kdca       =  6.       ! calcite dissolution rate constant (1/time)
+   nca        =  1.       ! order of dissolution reaction (dimensionless)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampissbc     !   parameters for inputs deposition
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !  file name        ! frequency (hours) ! variable      ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                   !  (if <0  months)  !   name        !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_dust     = 'dust.orca'       ,     -1            , 'dust'        ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_solub    = 'solubility.orca' ,    -12            , 'solubility1' ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdic = 'river.orca'      ,    120            , 'riverdic'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdoc = 'river.orca'      ,    120            , 'riverdoc'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdin = 'river.orca'      ,    120            , 'riverdin'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdon = 'river.orca'      ,    120            , 'riverdon'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdip = 'river.orca'      ,    120            , 'riverdip'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdop = 'river.orca'      ,    120            , 'riverdop'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_riverdsi = 'river.orca'      ,    120            , 'riverdsi'    ,  .true.      , .true. , 'yearly'  , ''       , ''    , ''
+   sn_ndepo    = 'ndeposition.orca',    -12            , 'ndep'        ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   sn_ironsed  = 'bathy.orca'      ,    -12            , 'bathy'       ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+   sn_hydrofe  = 'hydrofe.orca'    ,    -12            , 'epsdb'       ,  .false.     , .true. , 'yearly'  , ''       , ''    , ''
+!
+   cn_dir      = './'      !  root directory for the location of the dynamical files
+   ln_dust     =  .true.   ! boolean for dust input from the atmosphere
+   ln_solub    =  .true.   ! boolean for variable solubility of atm. Iron
+   ln_river    =  .true.   ! boolean for river input of nutrients
+   ln_ndepo    =  .true.   ! boolean for atmospheric deposition of N
+   ln_ironsed  =  .true.   ! boolean for Fe input from sediments
+   ln_ironice  =  .true.   ! boolean for Fe input from sea ice
+   ln_hydrofe  =  .false.  ! boolean for from hydrothermal vents
+   sedfeinput  =  2.e-9    ! Coastal release of Iron
+   dustsolub   =  0.02     ! Solubility of the dusta
+   mfrac       =  0.035    ! Fe mineral fraction of dust
+   wdust       =  2.0      ! Dust sinking speed 
+   icefeinput  =  15.e-9   ! Iron concentration in sea ice
+   nitrfix     =  1.e-7    ! Nitrogen fixation rate
+   diazolight  =  50.      ! Diazotrophs sensitivity to light (W/m2)
+   concfediaz  =  1.e-10   ! Diazotrophs half-saturation Cste for Iron
+   hratio      =  1.e+7    ! Fe to 3He ratio assumed for vent iron supply 
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisice      !  Prescribed sea ice tracers
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+! constant ocean tracer concentrations are defined in trcice_pisces.F90 (Global, Arctic, Antarctic and Baltic)
+! trc_ice_ratio     * betw 0 and 1: prescribed ice/ocean tracer concentration ratio
+!                   * -1 => the ice-ocean tracer concentration ratio follows the 
+!                           ice-ocean salinity ratio
+!                   * -2 => tracer concentration in sea ice is prescribed and 
+!                           trc_ice_prescr is used
+! trc_ice_prescr    * prescribed tracer concentration. used only if 
+!                     trc_ice_ratio = -2. equals -99 if not used.
+! cn_trc_o          * 'GL' use global ocean values making the Baltic distinction only
+!                     'AA' use specific Arctic/Antarctic/Baltic values
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!    sn_tri_ ! trc_ice_ratio ! trc_ice_prescr !     cn_trc_o
+   sn_tri_dic =           -1.,           -99.,          'AA'
+   sn_tri_doc =            0.,           -99.,          'AA'
+   sn_tri_tal =           -1.,           -99.,          'AA'
+   sn_tri_oxy =           -1.,           -99.,          'AA'
+   sn_tri_cal =            0.,           -99.,          'AA'
+   sn_tri_po4 =           -1.,           -99.,          'AA'
+   sn_tri_poc =            0.,           -99.,          'AA'
+   sn_tri_goc =            0.,           -99.,          'AA'
+   sn_tri_bfe =            0.,           -99.,          'AA'
+   sn_tri_num =            0.,           -99.,          'AA'
+   sn_tri_sil =           -1.,           -99.,          'AA'
+   sn_tri_dsi =            0.,           -99.,          'AA'
+   sn_tri_gsi =            0.,           -99.,          'AA'
+   sn_tri_phy =            0.,           -99.,          'AA'
+   sn_tri_dia =            0.,           -99.,          'AA'
+   sn_tri_zoo =            0.,           -99.,          'AA'
+   sn_tri_mes =            0.,           -99.,          'AA'
+   sn_tri_fer =           -2.,          15E-9,          'AA'
+   sn_tri_sfe =            0.,           -99.,          'AA'
+   sn_tri_dfe =            0.,           -99.,          'AA'
+   sn_tri_nfe =            0.,           -99.,          'AA'
+   sn_tri_nch =            0.,           -99.,          'AA'
+   sn_tri_dch =            0.,           -99.,          'AA'
+   sn_tri_no3 =           -1.,           -99.,          'AA'
+   sn_tri_nh4 =            1.,           -99.,          'AA'
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiskrp     !   Kriest parameterization : parameters     "key_kriest"
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkr_eta      = 1.17    ! Sinking  exponent
+   xkr_zeta     = 2.28    ! N content exponent
+   xkr_ncontent = 5.7E-6  ! N content factor
+   xkr_mass_min = 0.0002  ! Minimum mass for Aggregates
+   xkr_mass_max = 1.      ! Maximum mass for Aggregates
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiskrs     !   Kriest parameterization : size classes  "key_kriest"
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkr_sfact    = 942.    ! Sinking factor
+   xkr_stick    = 0.5     ! Stickiness
+   xkr_nnano    = 2.337   ! Nbr of cell in nano size class
+   xkr_ndiat    = 3.718   ! Nbr of cell in diatoms size class
+   xkr_nmeso    = 7.147   ! Nbr of cell in mesozoo size class
+   xkr_naggr    = 9.877   ! Nbr of cell in aggregates  size class
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdia     !   additional 2D/3D tracers diagnostics 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!              !    name   !           title of the field          !     units      !
+!              !           !                                       !                !  
+   pisdia2d(1)  = 'Cflx     ' , 'DIC flux                          ',  'molC/m2/s    '
+   pisdia2d(2)  = 'Oflx     ' , 'Oxygen flux                       ',  'molC/m2/s    '
+   pisdia2d(3)  = 'Kg       ' , 'Gas transfer                      ',  'mol/m2/s/uatm'
+   pisdia2d(4)  = 'Delc     ' , 'Delta CO2                         ',  'uatm         '
+   pisdia2d(5)  = 'PMO      ' , 'POC export                        ',  'molC/m2/s    '
+   pisdia2d(6)  = 'PMO2     ' , 'GOC export                        ',  'molC/m2/s    '
+   pisdia2d(7)  = 'ExpFe1   ' , 'Nano iron export                  ',  'molFe/m2/s   '
+   pisdia2d(8)  = 'ExpFe2   ' , 'Diatoms iron export               ',  'molFe/m2/s   '
+   pisdia2d(9)  = 'ExpSi    ' , 'Silicate export                   ',  'molSi/m2/s   '
+   pisdia2d(10) = 'ExpCaCO3 ' , 'Calcite export                    ',  'molC/m2/s    '
+   pisdia2d(11) = 'heup     ' , 'euphotic layer depth              ',  'm            '
+   pisdia2d(12) = 'Fedep    ' , 'Iron dep                          ',  'molFe/m2/s   '
+   pisdia2d(13) = 'Nfix     ' , 'Nitrogen Fixation                 ',  'molN/m2/s    '
+   pisdia3d(1)  = 'PH       ' , 'PH                                ',  '-            '
+   pisdia3d(2)  = 'CO3      ' , 'Bicarbonates                      ',  'mol/l        '
+   pisdia3d(3)  = 'CO3sat   ' , 'CO3 saturation                    ',  'mol/l        '
+   pisdia3d(4)  = 'PAR      ' , 'light penetration                 ',  'W/m2         '
+   pisdia3d(5)  = 'PPPHY    ' , 'Primary production of nanophyto   ',  'molC/m3/s    '
+   pisdia3d(6)  = 'PPPHY2   ' , 'Primary production of diatoms     ',  'molC/m3/s    '
+   pisdia3d(7)  = 'PPNEWN   ' , 'New Primary production of nano    ',  'molC/m3/s    '
+   pisdia3d(8)  = 'PPNEWD   ' , 'New Primary production of diat    ',  'molC/m3/s    '
+   pisdia3d(9)  = 'PBSi     ' , 'Primary production of Si diatoms  ',  'molSi/m3/s   '
+   pisdia3d(10) = 'PFeN     ' , 'Primary production of nano iron   ',  'molFe/m3/s   '
+   pisdia3d(11) = 'PFeD     ' , 'Primary production of diatoms iron',  'molFe/m3/s   '
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdmp     !  Damping 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_pisdmp    =  .true.     !  Relaxation fo some tracers to a mean value
+   nn_pisdmp    =  5475       !  Frequency of Relaxation 
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismass     !  Mass conservation
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_check_mass =  .false.    !  Check mass conservation
+/
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! PISCES reduced (key_pisces_reduced, ex LOBSTER) : namelists
+!!              1  - biological parameters for phytoplankton    (namlobphy)
+!!              2  - biological parameters for nutrients        (namlobnut)
+!!              3  - biological parameters for zooplankton      (namlobzoo)    
+!!              4  - biological parameters for detritus         (namlobdet)
+!!              5  - biological parameters for DOM              (namlobdom)
+!!              6  - parameters from aphotic layers to sediment (namlobsed)
+!!              7  - general coefficients                       (namlobrat)
+!!              8  - optical parameters                         (namlobopt)
+
+!!              10 - biological diagnostics trends              (namlobdbi) 
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobphy     !   biological parameters for phytoplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   tmumax  =  1.21e-5   ! maximal phytoplankton growth rate            [s-1] 
+   rgamma  =  0.05      ! phytoplankton exudation fraction             [%]
+   fphylab =  0.75      ! NH4 fraction of phytoplankton exsudation     
+   tmminp  =  5.8e-7    ! minimal phytoplancton mortality rate         [0.05/86400 s-1=20 days] 
+   aki     =  33.       ! light photosynthesis half saturation constant[W/m2]
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobnut     !   biological parameters for nutrients
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   akno3   =  0.7       ! nitrate limitation half-saturation value     [mmol/m3]
+   aknh4   =  0.001     ! ammonium limitation half-saturation value    [mmol/m3]
+   taunn   =  5.80e-7   ! nitrification rate                           [s-1]  
+   psinut  =  3.        ! inhibition of nitrate uptake by ammonium
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobzoo     !   biological parameters for zooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   rppz    = 0.8        ! zooplankton nominal preference for phytoplancton food  [%]
+   taus    = 9.26E-6    ! specific zooplankton maximal grazing rate              [s-1] 
+!                       ! 0.75/86400 s-1=8.680555E-6    1/86400 = 1.15e-5
+   aks     = 1.         ! half-saturation constant for total zooplankton grazing [mmolN.m-3]
+   rpnaz   = 0.3        ! non-assimilated phytoplankton by zooplancton           [%]
+   rdnaz   = 0.3        ! non-assimilated detritus by zooplankton                [%] 
+   tauzn   = 8.1e-7     ! zooplancton specific excretion rate                    [0.1/86400 s-1=10 days] 
+   fzoolab = 0.5        ! NH4 fraction of zooplankton excretion
+   fdbod   = 0.5        ! zooplankton mortality fraction that goes to detritus
+   tmminz  = 2.31e-6    ! minimal zooplankton mortality rate                     [(mmolN/m3)-1 d-1]
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobdet     !   biological parameters for detritus
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   taudn   = 5.80e-7    ! detritus breakdown rate                        [0.1/86400 s-1=10 days]
+   fdetlab = 0.         ! NH4 fraction of detritus dissolution           
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobdom     !   biological parameters for DOM
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   taudomn = 6.43e-8    ! DOM breakdown rate                             [s-1] 
+!                       ! slow remineralization rate of semi-labile dom to nh4 (1 month)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobsed     !   parameters from aphotic layers to sediment
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   sedlam     = 3.86e-7    ! time coefficient of POC remineralization in sediments [s-1]
+   sedlostpoc = 0.         ! mass of POC lost in sediments
+   vsed       = 3.47e-5    ! detritus sedimentation speed                   [m/s]
+   xhr        = -0.858     ! coeff for martin''s remineralisation profile
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobrat     !   general coefficients
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   rcchl   = 60.       ! Carbone/Chlorophyl ratio                     [mgC.mgChla-1]
+   redf    = 6.56       ! redfield ratio (C:N) for phyto
+   reddom  = 6.56       ! redfield ratio (C:N) for DOM
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namlobopt     !   optical parameters
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkg0   = 0.0232     ! green absorption coefficient of water
+   xkr0   = 0.225      ! red absorption coefficent of water
+   xkgp   = 0.074      ! green absorption coefficient of chl
+   xkrp   = 0.037      ! red absorption coefficient of chl
+   xlg    = 0.674      ! green chl exposant for absorption
+   xlr    = 0.629      ! red chl exposant for absorption
+   rpig   = 0.7        ! chla/chla+pheo ratio
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdbi     !   biological diagnostics trends     
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+!                !  2D bio diagnostics   units : mmole/m2/s   ("key_trdmld_trc")
+!                !  name    !       title of the field      !     units      !
+   pisdiabio(1)  = 'NO3PHY' , 'Flux from NO3 to PHY          ',  'mmole/m3/s'
+   pisdiabio(2)  = 'NH4PHY' , 'Flux from NH4 to PHY          ',  'mmole/m3/s'
+   pisdiabio(3)  = 'PHYNH4' , 'Flux from PHY to NH4          ',  'mmole/m3/s'
+   pisdiabio(4)  = 'PHYDOM' , 'Flux from PHY to DOM          ',  'mmole/m3/s'
+   pisdiabio(5)  = 'PHYZOO' , 'Flux from PHY to ZOO          ',  'mmole/m3/s'
+   pisdiabio(6)  = 'PHYDET' , 'Flux from PHY to DET          ',  'mmole/m3/s'
+   pisdiabio(7)  = 'DETZOO' , 'Flux from DET to ZOO          ',  'mmole/m3/s'
+   pisdiabio(8)  = 'DETSED' , 'Flux from DET to SED          ',  'mmole/m3/s'
+   pisdiabio(9)  = 'ZOODET' , 'Flux from ZOO to DET          ',  'mmole/m3/s'
+   pisdiabio(10)  = 'ZOOBOD' , 'Zooplankton closure          ',  'mmole/m3/s'
+   pisdiabio(11)  = 'ZOONH4' , 'Flux from ZOO to NH4         ',  'mmole/m3/s'
+   pisdiabio(12)  = 'ZOODOM' , 'Flux from ZOO to DOM         ',  'mmole/m3/s'
+   pisdiabio(13)  = 'NH4NO3' , 'Flux from NH4 to NO3         ',  'mmole/m3/s'
+   pisdiabio(14)  = 'DOMNH4' , 'Flux from DOM to NH4         ',  'mmole/m3/s'
+   pisdiabio(15)  = 'DETNH4' , 'Flux from DET to NH4         ',  'mmole/m3/s'
+   pisdiabio(16)  = 'DETDOM' , 'Flux from DET to DOM         ',  'mmole/m3/s'
+   pisdiabio(17)  = 'SEDNO3' , 'NO3 remineralization from SED',  'mmole/m3/s'
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_ref
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_ref	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_ref	(revision 5893)
@@ -0,0 +1,1263 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if ln_rstart=F or (ln_rstart=T and nn_rstctl=0 or 1)
+   nn_leapy    =       0   !  Leap year calendar (1) or not (0)
+   ln_rstart   = .false.   !  start from rest (F) or from a restart file (T)
+   nn_euler    =       1   !  = 0 : start with forward time step if ln_rstart=T
+   nn_rstctl   =       0   !  restart control ==> activated only if ln_rstart=T
+                           !    = 0 nn_date0 read in namelist ; nn_it000 : read in namelist
+                           !    = 1 nn_date0 read in namelist ; nn_it000 : check consistancy between namelist and restart
+                           !    = 2 nn_date0 read in restart  ; nn_it000 : check consistancy between namelist and restart
+   cn_ocerst_in  = "restart"   !  suffix of ocean restart name (input)
+   cn_ocerst_indir = "."       !  directory from which to read input ocean restarts
+   cn_ocerst_out = "restart"   !  suffix of ocean restart name (output)
+   cn_ocerst_outdir = "."      !  directory in which to write output ocean restarts
+   nn_istate   =       0   !  output the initial state (1) or not (0)
+   ln_rst_list = .false.   !  output restarts at list of times using nn_stocklist (T) or at set frequency with nn_stock (F)
+   nn_stock    =    5475   !  frequency of creation of a restart file (modulo referenced to 1)
+   nn_stocklist = 0,0,0,0,0,0,0,0,0,0 ! List of timesteps when a restart file is to be written
+   nn_write    =    5475   !  frequency of write in the output file   (modulo referenced to nn_it000)
+   ln_dimgnnn  = .false.   !  DIMG file format: 1 file for all processors (F) or by processor (T)
+   ln_mskland  = .false.   !  mask land points in NetCDF outputs (costly: + ~15%)
+   ln_cfmeta   = .false.   !  output additional data to netCDF files required for compliance with the CF metadata standard
+   ln_clobber  = .false.   !  clobber (overwrite) an existing file
+   nn_chunksz  =       0   !  chunksize (bytes) for NetCDF file (works only with iom_nf90 routines)
+/
+!
+!!======================================================================
+!!                      ***  Domain namelists  ***
+!!======================================================================
+!!   namcfg       parameters of the configuration
+!!   namzgr       vertical coordinate
+!!   namzgr_sco   s-coordinate or hybrid z-s-coordinate
+!!   namdom       space and time domain (bathymetry, mesh, timestep)
+!!   namtsd       data: temperature & salinity
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namcfg     !   parameters of the configuration
+!-----------------------------------------------------------------------
+   cp_cfg      =  "default"            !  name of the configuration
+   cp_cfz      =  "no zoom"            !  name of the zoom of configuration
+   jp_cfg      =       0               !  resolution of the configuration
+   jpidta      =      10               !  1st lateral dimension ( >= jpi )
+   jpjdta      =      12               !  2nd    "         "    ( >= jpj )
+   jpkdta      =      31               !  number of levels      ( >= jpk )
+   jpiglo      =      10               !  1st dimension of global domain --> i =jpidta
+   jpjglo      =      12               !  2nd    -                  -    --> j =jpjdta
+   jpizoom     =       1               !  left bottom (i,j) indices of the zoom
+   jpjzoom     =       1               !  in data domain indices
+   jperio      =       0               !  lateral cond. type (between 0 and 6)
+                                       !  = 0 closed                 ;   = 1 cyclic East-West
+                                       !  = 2 equatorial symmetric   ;   = 3 North fold T-point pivot
+                                       !  = 4 cyclic East-West AND North fold T-point pivot
+                                       !  = 5 North fold F-point pivot
+                                       !  = 6 cyclic East-West AND North fold F-point pivot
+   ln_use_jattr = .false.              !  use (T) the file attribute: open_ocean_jstart, if present
+                                       !  in netcdf input files, as the start j-row for reading
+/
+!-----------------------------------------------------------------------
+&namzgr        !   vertical coordinate
+!-----------------------------------------------------------------------
+   ln_zco      = .false.   !  z-coordinate - full    steps   (T/F)      ("key_zco" may also be defined)
+   ln_zps      = .true.    !  z-coordinate - partial steps   (T/F)
+   ln_sco      = .false.   !  s- or hybrid z-s-coordinate    (T/F)
+   ln_isfcav   = .false.   !  ice shelf cavity               (T/F)
+/
+!-----------------------------------------------------------------------
+&namzgr_sco    !   s-coordinate or hybrid z-s-coordinate
+!-----------------------------------------------------------------------
+   ln_s_sh94   = .true.    !  Song & Haidvogel 1994 hybrid S-sigma   (T)|
+   ln_s_sf12   = .false.   !  Siddorn & Furner 2012 hybrid S-z-sigma (T)| if both are false the NEMO tanh stretching is applied
+   ln_sigcrit  = .false.   !  use sigma coordinates below critical depth (T) or Z coordinates (F) for Siddorn & Furner stretch
+                           !  stretching coefficients for all functions
+   rn_sbot_min =   10.0    !  minimum depth of s-bottom surface (>0) (m)
+   rn_sbot_max = 7000.0    !  maximum depth of s-bottom surface (= ocean depth) (>0) (m)
+   rn_hc       =  150.0    !  critical depth for transition to stretched coordinates
+                        !!!!!!!  Envelop bathymetry
+   rn_rmax     =    0.3    !  maximum cut-off r-value allowed (0<r_max<1)
+                        !!!!!!!  SH94 stretching coefficients  (ln_s_sh94 = .true.)
+   rn_theta    =    6.0    !  surface control parameter (0<=theta<=20)
+   rn_bb       =    0.8    !  stretching with SH94 s-sigma
+                        !!!!!!!  SF12 stretching coefficient  (ln_s_sf12 = .true.)
+   rn_alpha    =    4.4    !  stretching with SF12 s-sigma
+   rn_efold    =    0.0    !  efold length scale for transition to stretched coord
+   rn_zs       =    1.0    !  depth of surface grid box
+                           !  bottom cell depth (Zb) is a linear function of water depth Zb = H*a + b
+   rn_zb_a     =    0.024  !  bathymetry scaling factor for calculating Zb
+   rn_zb_b     =   -0.2    !  offset for calculating Zb
+                        !!!!!!!! Other stretching (not SH94 or SF12) [also uses rn_theta above]
+   rn_thetb    =    1.0    !  bottom control parameter  (0<=thetb<= 1)
+/
+!-----------------------------------------------------------------------
+&namdom        !   space and time domain (bathymetry, mesh, timestep)
+!-----------------------------------------------------------------------
+   nn_bathy    =    1      !  compute (=0) or read (=1) the bathymetry file
+   rn_bathy    =    0.     !  value of the bathymetry. if (=0) bottom flat at jpkm1
+   nn_closea   =    0      !  remove (=0) or keep (=1) closed seas and lakes (ORCA)
+   nn_msh      =    1      !  create (=1) a mesh file or not (=0)
+   rn_hmin     =   -3.     !  min depth of the ocean (>0) or min number of ocean level (<0)
+   rn_e3zps_min=   20.     !  partial step thickness is set larger than the minimum of
+   rn_e3zps_rat=    0.1    !  rn_e3zps_min and rn_e3zps_rat*e3t, with 0<rn_e3zps_rat<1
+                           !
+   rn_rdt      = 5760.     !  time step for the dynamics (and tracer if nn_acc=0)
+   rn_atfp     =    0.1    !  asselin time filter parameter
+   nn_acc      =    0      !  acceleration of convergence : =1      used, rdt < rdttra(k)
+                                 !                          =0, not used, rdt = rdttra
+   rn_rdtmin   = 28800.          !  minimum time step on tracers (used if nn_acc=1)
+   rn_rdtmax   = 28800.          !  maximum time step on tracers (used if nn_acc=1)
+   rn_rdth     =  800.           !  depth variation of tracer time step  (used if nn_acc=1)
+   ln_crs      = .false.      !  Logical switch for coarsening module
+   jphgr_msh   =       0               !  type of horizontal mesh
+                                       !  = 0 curvilinear coordinate on the sphere read in coordinate.nc
+                                       !  = 1 geographical mesh on the sphere with regular grid-spacing
+                                       !  = 2 f-plane with regular grid-spacing
+                                       !  = 3 beta-plane with regular grid-spacing
+                                       !  = 4 Mercator grid with T/U point at the equator
+   ppglam0     =       0.0             !  longitude of first raw and column T-point (jphgr_msh = 1)
+   ppgphi0     =     -35.0             ! latitude  of first raw and column T-point (jphgr_msh = 1)
+   ppe1_deg    =       1.0             !  zonal      grid-spacing (degrees)
+   ppe2_deg    =       0.5             !  meridional grid-spacing (degrees)
+   ppe1_m      =    5000.0             !  zonal      grid-spacing (degrees)
+   ppe2_m      =    5000.0             !  meridional grid-spacing (degrees)
+   ppsur       =    -4762.96143546300  !  ORCA r4, r2 and r05 coefficients
+   ppa0        =      255.58049070440  ! (default coefficients)
+   ppa1        =      245.58132232490  !
+   ppkth       =       21.43336197938  !
+   ppacr       =        3.0            !
+   ppdzmin     =       10.             !  Minimum vertical spacing
+   pphmax      =     5000.             !  Maximum depth
+   ldbletanh   =    .TRUE.             !  Use/do not use double tanf function for vertical coordinates
+   ppa2        =      100.760928500000 !  Double tanh function parameters
+   ppkth2      =       48.029893720000 !
+   ppacr2      =       13.000000000000 !
+/
+!-----------------------------------------------------------------------
+&namsplit      !   time splitting parameters                            ("key_dynspg_ts")
+!-----------------------------------------------------------------------
+   ln_bt_fw      =    .TRUE.           !  Forward integration of barotropic equations
+   ln_bt_av      =    .TRUE.           !  Time filtering of barotropic variables
+   ln_bt_nn_auto =    .TRUE.           !  Set nn_baro automatically to be just below
+                                       !  a user defined maximum courant number (rn_bt_cmax)
+   nn_baro       =    30               !  Number of iterations of barotropic mode
+                                       !  during rn_rdt seconds. Only used if ln_bt_nn_auto=F
+   rn_bt_cmax    =    0.8              !  Maximum courant number allowed if ln_bt_nn_auto=T
+   nn_bt_flt     =    1                !  Time filter choice
+                                       !  = 0 None
+                                       !  = 1 Boxcar over   nn_baro barotropic steps
+                                       !  = 2 Boxcar over 2*nn_baro     "        "
+/
+!-----------------------------------------------------------------------
+&namcrs        !   Grid coarsening for dynamics output and/or
+               !   passive tracer coarsened online simulations
+!-----------------------------------------------------------------------
+   nn_factx    = 3         !  Reduction factor of x-direction
+   nn_facty    = 3         !  Reduction factor of y-direction
+   nn_binref   = 0         !  Bin centering preference: NORTH or EQUAT
+                           !  0, coarse grid is binned with preferential treatment of the north fold
+                           !  1, coarse grid is binned with centering at the equator
+                           !    Symmetry with nn_facty being odd-numbered. Asymmetry with even-numbered nn_facty.
+   nn_msh_crs  = 1         !  create (=1) a mesh file or not (=0)
+   nn_crs_kz   = 0         ! 0, MEAN of volume boxes
+                           ! 1, MAX of boxes
+                           ! 2, MIN of boxes
+   ln_crs_wn   = .true.    ! wn coarsened (T) or computed using horizontal divergence ( F )
+/
+!-----------------------------------------------------------------------
+&namc1d        !   1D configuration options                             ("key_c1d")
+!-----------------------------------------------------------------------
+   rn_lat1d    =      50   !  Column latitude (default at PAPA station)
+   rn_lon1d    =    -145   !  Column longitude (default at PAPA station)
+   ln_c1d_locpt=  .true.   ! Localization of 1D config in a grid (T) or independant point (F)
+/
+!-----------------------------------------------------------------------
+&namtsd    !   data : Temperature  & Salinity
+!-----------------------------------------------------------------------
+!          !  file name                            ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!          !                                       !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_tem  = 'data_1m_potential_temperature_nomask',         -1        ,'votemper' ,    .true.    , .true. , 'yearly'   , ''       ,   ''    ,    ''
+   sn_sal  = 'data_1m_salinity_nomask'             ,         -1        ,'vosaline' ,    .true.    , .true. , 'yearly'   , ''       ,   ''    ,    ''
+   !
+   cn_dir        = './'     !  root directory for the location of the runoff files
+   ln_tsd_init   = .true.   !  Initialisation of ocean T & S with T &S input data (T) or not (F)
+   ln_tsd_tradmp = .true.   !  damping of ocean T & S toward T &S input data (T) or not (F)
+/
+!!======================================================================
+!!            ***  Surface Boundary Condition namelists  ***
+!!======================================================================
+!!   namsbc          surface boundary condition
+!!   namsbc_ana      analytical         formulation
+!!   namsbc_flx      flux               formulation
+!!   namsbc_clio     CLIO bulk formulae formulation
+!!   namsbc_core     CORE bulk formulae formulation
+!!   namsbc_mfs      MFS  bulk formulae formulation
+!!   namsbc_cpl      CouPLed            formulation                     ("key_oasis3")
+!!   namsbc_sas      StAndalone Surface module
+!!   namtra_qsr      penetrative solar radiation
+!!   namsbc_rnf      river runoffs
+!!   namsbc_isf      ice shelf melting/freezing
+!!   namsbc_apr      Atmospheric Pressure
+!!   namsbc_ssr      sea surface restoring term (for T and/or S)
+!!   namsbc_alb      albedo parameters
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namsbc        !   Surface Boundary Condition (surface module)
+!-----------------------------------------------------------------------
+   nn_fsbc     = 5         !  frequency of surface boundary condition computation
+                           !     (also = the frequency of sea-ice model call)
+   ln_ana      = .false.   !  analytical formulation                    (T => fill namsbc_ana )
+   ln_flx      = .false.   !  flux formulation                          (T => fill namsbc_flx )
+   ln_blk_clio = .false.   !  CLIO bulk formulation                     (T => fill namsbc_clio)
+   ln_blk_core = .true.    !  CORE bulk formulation                     (T => fill namsbc_core)
+   ln_blk_mfs  = .false.   !  MFS bulk formulation                      (T => fill namsbc_mfs )
+   ln_cpl      = .false.   !  atmosphere coupled   formulation          ( requires key_oasis3 )
+   ln_mixcpl   = .false.   !  forced-coupled mixed formulation          ( requires key_oasis3 )
+   nn_components = 0       !  configuration of the opa-sas OASIS coupling
+                           !  =0 no opa-sas OASIS coupling: default single executable configuration
+                           !  =1 opa-sas OASIS coupling: multi executable configuration, OPA component
+                           !  =2 opa-sas OASIS coupling: multi executable configuration, SAS component 
+   ln_apr_dyn  = .false.   !  Patm gradient added in ocean & ice Eqs.   (T => fill namsbc_apr )
+   nn_ice      = 2         !  =0 no ice boundary condition   ,
+                           !  =1 use observed ice-cover      ,
+                           !  =2 ice-model used                         ("key_lim3" or "key_lim2")
+   nn_ice_embd = 1         !  =0 levitating ice (no mass exchange, concentration/dilution effect)
+                           !  =1 levitating ice with mass and salt exchange but no presure effect
+                           !  =2 embedded sea-ice (full salt and mass exchanges and pressure)
+   ln_dm2dc    = .false.   !  daily mean to diurnal cycle on short wave
+   ln_rnf      = .true.    !  runoffs                                   (T   => fill namsbc_rnf)
+   nn_isf      = 0         !  ice shelf melting/freezing                (/=0 => fill namsbc_isf)
+                           !  0 =no isf                  1 = presence of ISF
+                           !  2 = bg03 parametrisation   3 = rnf file for isf
+                           !  4 = ISF fwf specified
+                           !  option 1 and 4 need ln_isfcav = .true. (domzgr)
+   ln_ssr      = .true.    !  Sea Surface Restoring on T and/or S       (T => fill namsbc_ssr)
+   nn_fwb      = 2         !  FreshWater Budget: =0 unchecked
+                           !     =1 global mean of e-p-r set to zero at each time step
+                           !     =2 annual global mean of e-p-r set to zero
+   ln_wave = .false.       !  Activate coupling with wave (either Stokes Drift or Drag coefficient, or both)  (T => fill namsbc_wave)
+   ln_cdgw = .false.       !  Neutral drag coefficient read from wave model (T => fill namsbc_wave)
+   ln_sdw  = .false.       !  Computation of 3D stokes drift                (T => fill namsbc_wave)
+   nn_lsm  = 0             !  =0 land/sea mask for input fields is not applied (keep empty land/sea mask filename field) ,
+                           !  =1:n number of iterations of land/sea mask application for input fields (fill land/sea mask filename field)
+   nn_limflx = -1          !  LIM3 Multi-category heat flux formulation (use -1 if LIM3 is not used)
+                           !  =-1  Use per-category fluxes, bypass redistributor, forced mode only, not yet implemented coupled
+                           !  = 0  Average per-category fluxes (forced and coupled mode)
+                           !  = 1  Average and redistribute per-category fluxes, forced mode only, not yet implemented coupled
+                           !  = 2  Redistribute a single flux over categories (coupled mode only)
+/
+!-----------------------------------------------------------------------
+&namsbc_ana    !   analytical surface boundary condition
+!-----------------------------------------------------------------------
+   nn_tau000   =   0       !  gently increase the stress over the first ntau_rst time-steps
+   rn_utau0    =   0.5     !  uniform value for the i-stress
+   rn_vtau0    =   0.e0    !  uniform value for the j-stress
+   rn_qns0     =   0.e0    !  uniform value for the total heat flux
+   rn_qsr0     =   0.e0    !  uniform value for the solar radiation
+   rn_emp0     =   0.e0    !  uniform value for the freswater budget (E-P)
+/
+!-----------------------------------------------------------------------
+&namsbc_flx    !   surface boundary condition : flux formulation
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_utau     = 'utau'      ,        24         , 'utau'    , .false.      , .false., 'yearly'  , ''       , ''       , ''
+   sn_vtau     = 'vtau'      ,        24         , 'vtau'    , .false.      , .false., 'yearly'  , ''       , ''       , ''
+   sn_qtot     = 'qtot'      ,        24         , 'qtot'    , .false.      , .false., 'yearly'  , ''       , ''       , ''
+   sn_qsr      = 'qsr'       ,        24         , 'qsr'     , .false.      , .false., 'yearly'  , ''       , ''       , ''
+   sn_emp      = 'emp'       ,        24         , 'emp'     , .false.      , .false., 'yearly'  , ''       , ''       , ''
+
+   cn_dir      = './'      !  root directory for the location of the flux files
+/
+!-----------------------------------------------------------------------
+&namsbc_clio   !   namsbc_clio  CLIO bulk formulae
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_utau     = 'taux_1m'   ,       -1          , 'sozotaux',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_vtau     = 'tauy_1m'   ,       -1          , 'sometauy',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_wndm     = 'flx'       ,       -1          , 'socliowi',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_tair     = 'flx'       ,       -1          , 'socliot2',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_humi     = 'flx'       ,       -1          , 'socliohu',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_ccov     = 'flx'       ,       -1          , 'socliocl',   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+   sn_prec     = 'flx'       ,       -1          , 'socliopl',   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+
+   cn_dir      = './'      !  root directory for the location of the bulk files are
+/
+!-----------------------------------------------------------------------
+&namsbc_core   !   namsbc_core  CORE bulk formulae
+!-----------------------------------------------------------------------
+!              !  file name                    ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights                               ! rotation ! land/sea mask !
+!              !                               !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename                              ! pairing  ! filename      !
+   sn_wndi     = 'u_10.15JUNE2009_fill'        ,         6         , 'U_10_MOD',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bicubic_noc.nc'   , 'Uwnd'   , ''
+   sn_wndj     = 'v_10.15JUNE2009_fill'        ,         6         , 'V_10_MOD',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bicubic_noc.nc'   , 'Vwnd'   , ''
+   sn_qsr      = 'ncar_rad.15JUNE2009_fill'    ,        24         , 'SWDN_MOD',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+   sn_qlw      = 'ncar_rad.15JUNE2009_fill'    ,        24         , 'LWDN_MOD',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+   sn_tair     = 't_10.15JUNE2009_fill'        ,         6         , 'T_10_MOD',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+   sn_humi     = 'q_10.15JUNE2009_fill'        ,         6         , 'Q_10_MOD',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+   sn_prec     = 'ncar_precip.15JUNE2009_fill' ,        -1         , 'PRC_MOD1',   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+   sn_snow     = 'ncar_precip.15JUNE2009_fill' ,        -1         , 'SNOW'    ,   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+   sn_tdif     = 'taudif_core'                 ,        24         , 'taudif'  ,   .false.    , .true. , 'yearly'  , 'weights_core_orca2_bilinear_noc.nc'  , ''       , ''
+
+   cn_dir      = './'      !  root directory for the location of the bulk files
+   ln_taudif   = .false.   !  HF tau contribution: use "mean of stress module - module of the mean stress" data
+   rn_zqt      = 10.        !  Air temperature and humidity reference height (m)
+   rn_zu       = 10.        !  Wind vector reference height (m)
+   rn_pfac     = 1.        !  multiplicative factor for precipitation (total & snow)
+   rn_efac     = 1.        !  multiplicative factor for evaporation (0. or 1.)
+   rn_vfac     = 0.        !  multiplicative factor for ocean/ice velocity
+                           !  in the calculation of the wind stress (0.=absolute winds or 1.=relative winds)
+/
+!-----------------------------------------------------------------------
+&namsbc_mfs   !   namsbc_mfs  MFS bulk formulae
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights     ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename    ! pairing  ! filename      !
+   sn_wndi     =   'ecmwf'   ,        6          , 'u10'     ,    .true.    , .false. , 'daily'  ,'bicubic.nc' , ''       , ''
+   sn_wndj     =   'ecmwf'   ,        6          , 'v10'     ,    .true.    , .false. , 'daily'  ,'bicubic.nc' , ''       , ''
+   sn_clc      =   'ecmwf'   ,        6          , 'clc'     ,    .true.    , .false. , 'daily'  ,'bilinear.nc', ''       , ''
+   sn_msl      =   'ecmwf'   ,        6          , 'msl'     ,    .true.    , .false. , 'daily'  ,'bicubic.nc' , ''       , ''
+   sn_tair     =   'ecmwf'   ,        6          , 't2'      ,    .true.    , .false. , 'daily'  ,'bicubic.nc' , ''       , ''
+   sn_rhm      =   'ecmwf'   ,        6          , 'rh'      ,    .true.    , .false. , 'daily'  ,'bilinear.nc', ''       , ''
+   sn_prec     =   'ecmwf'   ,        6          , 'precip'  ,    .true.    , .true.  , 'daily'  ,'bicubic.nc' , ''       , ''
+
+   cn_dir      = './ECMWF/'      !  root directory for the location of the bulk files
+/
+!-----------------------------------------------------------------------
+&namsbc_cpl    !   coupled ocean/atmosphere model                       ("key_oasis3")
+!-----------------------------------------------------------------------
+!                    !     description       !  multiple  !    vector   !      vector          ! vector !
+!                    !                       ! categories !  reference  !    orientation       ! grids  !
+! send
+   sn_snd_temp   =       'weighted oce and ice' ,    'no'    ,     ''      ,         ''           ,   ''
+   sn_snd_alb    =       'weighted ice'         ,    'no'    ,     ''      ,         ''           ,   ''
+   sn_snd_thick  =       'none'                 ,    'no'   ,     ''      ,         ''           ,   ''
+   sn_snd_crt    =       'none'                 ,    'no'    , 'spherical' , 'eastward-northward' ,  'T'
+   sn_snd_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''           ,   ''
+! receive
+   sn_rcv_w10m   =       'none'                 ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_taumod =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_tau    =       'oce only'             ,    'no'    , 'cartesian' , 'eastward-northward',  'U,V'
+   sn_rcv_dqnsdt =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_qsr    =       'oce and ice'          ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_qns    =       'oce and ice'          ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_emp    =       'conservative'         ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_rnf    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_cal    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+   sn_rcv_co2    =       'coupled'              ,    'no'    ,     ''      ,         ''          ,   ''
+!
+   nn_cplmodel   =     1     !  Maximum number of models to/from which NEMO is potentialy sending/receiving data
+   ln_usecplmask = .false.   !  use a coupling mask file to merge data received from several models
+                             !   -> file cplmask.nc with the float variable called cplmask (jpi,jpj,nn_cplmodel)
+/
+!-----------------------------------------------------------------------
+&namsbc_sas    !   analytical surface boundary condition
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_usp      = 'sas_grid_U' ,    120           , 'vozocrtx' ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+   sn_vsp      = 'sas_grid_V' ,    120           , 'vomecrty' ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+   sn_tem      = 'sas_grid_T' ,    120           , 'sosstsst' ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+   sn_sal      = 'sas_grid_T' ,    120           , 'sosaline' ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+   sn_ssh      = 'sas_grid_T' ,    120           , 'sossheig' ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+   sn_e3t      = 'sas_grid_T' ,    120           , 'e3t_m'    ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+   sn_frq      = 'sas_grid_T' ,    120           , 'frq_m'    ,  .true.    , .true. ,   'yearly'  , ''       , ''             , ''
+
+   ln_3d_uve   = .true.    !  specify whether we are supplying a 3D u,v and e3 field
+   ln_read_frq = .false.    !  specify whether we must read frq or not
+   cn_dir      = './'      !  root directory for the location of the bulk files are
+/
+!-----------------------------------------------------------------------
+&namtra_qsr    !   penetrative solar radiation
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_chl      ='chlorophyll',        -1         , 'CHLA'    ,   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   ln_traqsr   = .true.    !  Light penetration (T) or not (F)
+   ln_qsr_rgb  = .true.    !  RGB (Red-Green-Blue) light penetration
+   ln_qsr_2bd  = .false.   !  2 bands              light penetration
+   ln_qsr_bio  = .false.   !  bio-model light penetration
+   nn_chldta   =      1    !  RGB : Chl data (=1) or cst value (=0)
+   rn_abs      =   0.58    !  RGB & 2 bands: fraction of light (rn_si1)
+   rn_si0      =   0.35    !  RGB & 2 bands: shortess depth of extinction
+   rn_si1      =   23.0    !  2 bands: longest depth of extinction
+   ln_qsr_ice  = .true.    !  light penetration for ice-model LIM3
+/
+!-----------------------------------------------------------------------
+&namsbc_rnf    !   runoffs namelist surface boundary condition
+!-----------------------------------------------------------------------
+!              !  file name           ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                      !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_rnf      = 'runoff_core_monthly',        -1         , 'sorunoff',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_cnf      = 'runoff_core_monthly',         0         , 'socoefr0',   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+   sn_s_rnf    = 'runoffs'            ,        24         , 'rosaline',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_t_rnf    = 'runoffs'            ,        24         , 'rotemper',   .true.     , .true. , 'yearly'  , ''       , ''       , ''
+   sn_dep_rnf  = 'runoffs'            ,         0         , 'rodepth' ,   .false.    , .true. , 'yearly'  , ''       , ''       , ''
+
+   cn_dir       = './'      !  root directory for the location of the runoff files
+   ln_rnf_mouth = .true.    !  specific treatment at rivers mouths
+   rn_hrnf      =  15.e0    !  depth over which enhanced vertical mixing is used
+   rn_avt_rnf   =   1.e-3   !  value of the additional vertical mixing coef. [m2/s]
+   rn_rfact     =   1.e0    !  multiplicative factor for runoff
+   ln_rnf_depth = .false.   !  read in depth information for runoff
+   ln_rnf_tem   = .false.   !  read in temperature information for runoff
+   ln_rnf_sal   = .false.   !  read in salinity information for runoff
+   ln_rnf_depth_ini = .false.  ! compute depth at initialisation from runoff file
+   rn_rnf_max   = 5.735e-4  !  max value of the runoff climatologie over global domain ( ln_rnf_depth_ini = .true )
+   rn_dep_max   = 150.      !  depth over which runoffs is spread ( ln_rnf_depth_ini = .true )
+   nn_rnf_depth_file = 0    !  create (=1) a runoff depth file or not (=0)
+/
+!-----------------------------------------------------------------------
+&namsbc_isf    !  Top boundary layer (ISF)
+!-----------------------------------------------------------------------
+!              ! file name ! frequency (hours) ! variable ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !           !  (if <0  months)  !   name   !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+! nn_isf == 4
+   sn_qisf      = 'rnfisf' ,         -12      ,'sohflisf',    .false.      , .true.  , 'yearly'  ,  ''      ,   ''
+   sn_fwfisf    = 'rnfisf' ,         -12      ,'sowflisf',    .false.      , .true.  , 'yearly'  ,  ''      ,   ''
+! nn_isf == 3
+   sn_rnfisf    = 'runoffs' ,         -12      ,'sofwfisf',    .false.      , .true.  , 'yearly'  ,  ''      ,   ''
+! nn_isf == 2 and 3
+   sn_depmax_isf = 'runoffs' ,       -12        ,'sozisfmax' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+   sn_depmin_isf = 'runoffs' ,       -12        ,'sozisfmin' ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+! nn_isf == 2
+   sn_Leff_isf = 'rnfisf' ,       0          ,'Leff'         ,   .false.  , .true.  , 'yearly'  ,  ''      ,   ''
+! for all case
+   ln_divisf   = .true.  ! apply isf melting as a mass flux or in the salinity trend. (maybe I should remove this option as for runoff?)
+! only for nn_isf = 1 or 2
+   rn_gammat0  = 1.0e-4   ! gammat coefficient used in blk formula
+   rn_gammas0  = 1.0e-4   ! gammas coefficient used in blk formula
+! only for nn_isf = 1
+   nn_isfblk   =  1       ! 1 ISOMIP ; 2 conservative (3 equation formulation, Jenkins et al. 1991 ??)
+   rn_hisf_tbl =  30.      ! thickness of the top boundary layer           (Losh et al. 2008)
+                          ! 0 => thickness of the tbl = thickness of the first wet cell
+   ln_conserve = .true.   ! conservative case (take into account meltwater advection)
+   nn_gammablk = 1        ! 0 = cst Gammat (= gammat/s)
+                          ! 1 = velocity dependend Gamma (u* * gammat/s)  (Jenkins et al. 2010)
+                          !     if you want to keep the cd as in global config, adjust rn_gammat0 to compensate
+                          ! 2 = velocity and stability dependent Gamma    Holland et al. 1999
+/
+!-----------------------------------------------------------------------
+&namsbc_apr    !   Atmospheric pressure used as ocean forcing or in bulk
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_apr      = 'patm'      ,         -1        ,'somslpre',    .true.     , .true. , 'yearly'  ,  ''      ,   ''     , ''
+
+   cn_dir      = './'       !  root directory for the location of the bulk files
+   rn_pref     = 101000.    !  reference atmospheric pressure   [N/m2]/
+   ln_ref_apr  = .false.    !  ref. pressure: global mean Patm (T) or a constant (F)
+   ln_apr_obc  = .false.    !  inverse barometer added to OBC ssh data
+/
+!-----------------------------------------------------------------------
+&namsbc_ssr    !   surface boundary condition : sea surface restoring
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_sst      = 'sst_data'  ,        24         ,  'sst'    ,    .false.   , .false., 'yearly'  , ''       , ''       , ''
+   sn_sss      = 'sss_data'  ,        -1         ,  'sss'    ,    .true.    , .true. , 'yearly'  , ''       , ''       , ''
+
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   nn_sstr     =     0     !  add a retroaction term in the surface heat       flux (=1) or not (=0)
+   nn_sssr     =     2     !  add a damping     term in the surface freshwater flux (=2)
+                           !  or to SSS only (=1) or no damping term (=0)
+   rn_dqdt     =   -40.    !  magnitude of the retroaction on temperature   [W/m2/K]
+   rn_deds     =  -166.67  !  magnitude of the damping on salinity   [mm/day]
+   ln_sssr_bnd =   .true.  !  flag to bound erp term (associated with nn_sssr=2)
+   rn_sssr_bnd =   4.e0    !  ABS(Max/Min) value of the damping erp term [mm/day]
+/
+!-----------------------------------------------------------------------
+&namsbc_alb    !   albedo parameters
+!-----------------------------------------------------------------------
+   rn_cloud    =    0.06   !  cloud correction to snow and ice albedo
+   rn_albice   =    0.53   !  albedo of melting ice in the arctic and antarctic
+   rn_alphd    =    0.80   !  coefficients for linear interpolation used to
+   rn_alphc    =    0.65   !  compute albedo between two extremes values
+   rn_alphdi   =    0.72   !  (Pyane, 1972)
+/
+!-----------------------------------------------------------------------
+&namberg       !   iceberg parameters
+!-----------------------------------------------------------------------
+      ln_icebergs              = .false.
+      ln_bergdia               = .true.               ! Calculate budgets
+      nn_verbose_level         = 1                    ! Turn on more verbose output if level > 0
+      nn_verbose_write         = 15                   ! Timesteps between verbose messages
+      nn_sample_rate           = 1                    ! Timesteps between sampling for trajectory storage
+                                                      ! Initial mass required for an iceberg of each class
+      rn_initial_mass          = 8.8e7, 4.1e8, 3.3e9, 1.8e10, 3.8e10, 7.5e10, 1.2e11, 2.2e11, 3.9e11, 7.4e11
+                                                      ! Proportion of calving mass to apportion to each class
+      rn_distribution          = 0.24, 0.12, 0.15, 0.18, 0.12, 0.07, 0.03, 0.03, 0.03, 0.02
+                                                      ! Ratio between effective and real iceberg mass (non-dim)
+                                                      ! i.e. number of icebergs represented at a point
+      rn_mass_scaling          = 2000, 200, 50, 20, 10, 5, 2, 1, 1, 1
+                                                      ! thickness of newly calved bergs (m)
+      rn_initial_thickness     = 40., 67., 133., 175., 250., 250., 250., 250., 250., 250.
+      rn_rho_bergs             = 850.                 ! Density of icebergs
+      rn_LoW_ratio             = 1.5                  ! Initial ratio L/W for newly calved icebergs
+      ln_operator_splitting    = .true.               ! Use first order operator splitting for thermodynamics
+      rn_bits_erosion_fraction = 0.                   ! Fraction of erosion melt flux to divert to bergy bits
+      rn_sicn_shift            = 0.                   ! Shift of sea-ice concn in erosion flux (0<sicn_shift<1)
+      ln_passive_mode          = .false.              ! iceberg - ocean decoupling
+      nn_test_icebergs         =  10                  ! Create test icebergs of this class (-1 = no)
+                                                      ! Put a test iceberg at each gridpoint in box (lon1,lon2,lat1,lat2)
+      rn_test_box              = 108.0,  116.0, -66.0, -58.0
+      rn_speed_limit           = 0.                   ! CFL speed limit for a berg
+
+!              ! file name ! frequency (hours) !   variable   ! time interp.   !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !           !  (if <0  months)  !     name     !   (logical)    !  (T/F ) ! 'monthly' ! filename ! pairing  ! filename      !
+      sn_icb =  'calving' ,       -1           , 'calvingmask',  .true.        , .true.  , 'yearly'  , ''       , ''       , ''
+
+      cn_dir = './'
+/
+
+!!======================================================================
+!!               ***  Lateral boundary condition  ***
+!!======================================================================
+!!   namlbc        lateral momentum boundary condition
+!!   namcla        cross land advection
+!!   namobc        open boundaries parameters                           ("key_obc")
+!!   namagrif      agrif nested grid ( read by child model only )       ("key_agrif")
+!!   nambdy        Unstructured open boundaries                         ("key_bdy")
+!!   namtide       Tidal forcing at open boundaries                     ("key_bdy_tides")
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namlbc        !   lateral momentum boundary condition
+!-----------------------------------------------------------------------
+   rn_shlat    =    2.     !  shlat = 0  !  0 < shlat < 2  !  shlat = 2  !  2 < shlat
+                           !  free slip  !   partial slip  !   no slip   ! strong slip
+   ln_vorlat   = .false.   !  consistency of vorticity boundary condition with analytical eqs.
+/
+!-----------------------------------------------------------------------
+&namcla        !   cross land advection
+!-----------------------------------------------------------------------
+   nn_cla      =    0      !  advection between 2 ocean pts separates by land
+/
+!-----------------------------------------------------------------------
+&namobc        !   open boundaries parameters                           ("key_obc")
+!-----------------------------------------------------------------------
+   ln_obc_clim = .false.   !  climatological obc data files (T) or not (F)
+   ln_vol_cst  = .true.    !  impose the total volume conservation (T) or not (F)
+   ln_obc_fla  = .false.   !  Flather open boundary condition
+   nn_obcdta   =    1      !  = 0 the obc data are equal to the initial state
+                           !  = 1 the obc data are read in 'obc.dta' files
+   cn_obcdta   = 'annual'  !  set to annual if obc datafile hold 1 year of data
+                           !  set to monthly if obc datafile hold 1 month of data
+   rn_dpein    =    1.     !  damping time scale for inflow at east  open boundary
+   rn_dpwin    =    1.     !     -           -         -       west    -      -
+   rn_dpnin    =    1.     !     -           -         -       north   -      -
+   rn_dpsin    =    1.     !     -           -         -       south   -      -
+   rn_dpeob    = 3000.     !  time relaxation (days) for the east  open boundary
+   rn_dpwob    =   15.     !     -           -         -     west    -      -
+   rn_dpnob    = 3000.     !     -           -         -     north   -      -
+   rn_dpsob    =   15.     !     -           -         -     south   -      -
+   rn_volemp   =    1.     !  = 0 the total volume change with the surface flux (E-P-R)
+                           !  = 1 the total volume remains constant
+/
+!-----------------------------------------------------------------------
+&namagrif      !  AGRIF zoom                                            ("key_agrif")
+!-----------------------------------------------------------------------
+   nn_cln_update =    3    !  baroclinic update frequency
+   ln_spc_dyn    = .true.  !  use 0 as special value for dynamics
+   rn_sponge_tra = 2880.   !  coefficient for tracer   sponge layer [m2/s]
+   rn_sponge_dyn = 2880.   !  coefficient for dynamics sponge layer [m2/s]
+/
+!-----------------------------------------------------------------------
+&nam_tide      !   tide parameters (#ifdef key_tide)
+!-----------------------------------------------------------------------
+   ln_tide_pot   = .true.   !  use tidal potential forcing
+   ln_tide_ramp  = .false.  !
+   rdttideramp   =    0.    !
+   clname(1)     = 'DUMMY'  !  name of constituent - all tidal components must be set in namelist_cfg
+/
+!-----------------------------------------------------------------------
+&nambdy        !  unstructured open boundaries                          ("key_bdy")
+!-----------------------------------------------------------------------
+    nb_bdy         = 0                    !  number of open boundary sets
+    ln_coords_file = .true.               !  =T : read bdy coordinates from file
+    cn_coords_file = 'coordinates.bdy.nc' !  bdy coordinates files
+    ln_mask_file   = .false.              !  =T : read mask from file
+    cn_mask_file   = ''                   !  name of mask file (if ln_mask_file=.TRUE.)
+    cn_dyn2d       = 'none'               !
+    nn_dyn2d_dta   =  0                   !  = 0, bdy data are equal to the initial state
+                                          !  = 1, bdy data are read in 'bdydata   .nc' files
+                                          !  = 2, use tidal harmonic forcing data from files
+                                          !  = 3, use external data AND tidal harmonic forcing
+    cn_dyn3d      =  'none'               !
+    nn_dyn3d_dta  =  0                    !  = 0, bdy data are equal to the initial state
+                                          !  = 1, bdy data are read in 'bdydata   .nc' files
+    cn_tra        =  'none'               !
+    nn_tra_dta    =  0                    !  = 0, bdy data are equal to the initial state
+                                          !  = 1, bdy data are read in 'bdydata   .nc' files
+    cn_ice_lim      =  'none'             !
+    nn_ice_lim_dta  =  0                  !  = 0, bdy data are equal to the initial state
+                                          !  = 1, bdy data are read in 'bdydata   .nc' files
+    rn_ice_tem      = 270.                !  lim3 only: arbitrary temperature of incoming sea ice
+    rn_ice_sal      = 10.                 !  lim3 only:      --   salinity           --
+    rn_ice_age      = 30.                 !  lim3 only:      --   age                --
+
+    ln_tra_dmp    =.false.                !  open boudaries conditions for tracers
+    ln_dyn3d_dmp  =.false.                !  open boundary condition for baroclinic velocities
+    rn_time_dmp   =  1.                   ! Damping time scale in days
+    rn_time_dmp_out =  1.                 ! Outflow damping time scale
+    nn_rimwidth   = 10                    !  width of the relaxation zone
+    ln_vol        = .false.               !  total volume correction (see nn_volctl parameter)
+    nn_volctl     = 1                     !  = 0, the total water flux across open boundaries is zero
+/
+!-----------------------------------------------------------------------
+&nambdy_dta      !  open boundaries - external data           ("key_bdy")
+!-----------------------------------------------------------------------
+!              !  file name      ! frequency (hours) ! variable   ! time interp.   !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                 !  (if <0  months)  !   name     !   (logical)    !  (T/F ) ! 'monthly' ! filename ! pairing  ! filename      !
+   bn_ssh =     'amm12_bdyT_u2d' ,         24        , 'sossheig' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   bn_u2d =     'amm12_bdyU_u2d' ,         24        , 'vobtcrtx' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   bn_v2d =     'amm12_bdyV_u2d' ,         24        , 'vobtcrty' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   bn_u3d  =    'amm12_bdyU_u3d' ,         24        , 'vozocrtx' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   bn_v3d  =    'amm12_bdyV_u3d' ,         24        , 'vomecrty' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   bn_tem  =    'amm12_bdyT_tra' ,         24        , 'votemper' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   bn_sal  =    'amm12_bdyT_tra' ,         24        , 'vosaline' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+! for lim2
+!   bn_frld  =    'amm12_bdyT_ice' ,         24        , 'ileadfra' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+!   bn_hicif =    'amm12_bdyT_ice' ,         24        , 'iicethic' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+!   bn_hsnif =    'amm12_bdyT_ice' ,         24        , 'isnowthi' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+! for lim3
+!   bn_a_i  =    'amm12_bdyT_ice' ,         24        , 'ileadfra' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+!   bn_ht_i =    'amm12_bdyT_ice' ,         24        , 'iicethic' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+!   bn_ht_s =    'amm12_bdyT_ice' ,         24        , 'isnowthi' ,     .true.     , .false. ,  'daily'  ,    ''    ,   ''     , ''
+   cn_dir  =    'bdydta/'
+   ln_full_vel = .false.
+/
+!-----------------------------------------------------------------------
+&nambdy_tide     ! tidal forcing at open boundaries
+!-----------------------------------------------------------------------
+   filtide          = 'bdydta/amm12_bdytide_'         !  file name root of tidal forcing files
+   ln_bdytide_2ddta = .false.
+   ln_bdytide_conj  = .false.
+/
+!!======================================================================
+!!                 ***  Bottom boundary condition  ***
+!!======================================================================
+!!   nambfr        bottom friction
+!!   nambbc        bottom temperature boundary condition
+!!   nambbl        bottom boundary layer scheme                         ("key_trabbl")
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&nambfr        !   bottom friction
+!-----------------------------------------------------------------------
+   nn_bfr      =    1      !  type of bottom friction :   = 0 : free slip,  = 1 : linear friction
+                           !                              = 2 : nonlinear friction
+   rn_bfri1    =    4.e-4  !  bottom drag coefficient (linear case)
+   rn_bfri2    =    1.e-3  !  bottom drag coefficient (non linear case). Minimum coeft if ln_loglayer=T
+   rn_bfri2_max =   1.e-1  !  max. bottom drag coefficient (non linear case and ln_loglayer=T)
+   rn_bfeb2    =    2.5e-3 !  bottom turbulent kinetic energy background  (m2/s2)
+   rn_bfrz0    =    3.e-3  !  bottom roughness [m] if ln_loglayer=T
+   ln_bfr2d    = .false.   !  horizontal variation of the bottom friction coef (read a 2D mask file )
+   rn_bfrien   =    50.    !  local multiplying factor of bfr (ln_bfr2d=T)
+   rn_tfri1    =    4.e-4  !  top drag coefficient (linear case)
+   rn_tfri2    =    2.5e-3 !  top drag coefficient (non linear case). Minimum coeft if ln_loglayer=T
+   rn_tfri2_max =   1.e-1  !  max. top drag coefficient (non linear case and ln_loglayer=T)
+   rn_tfeb2    =    0.0    !  top turbulent kinetic energy background  (m2/s2)
+   rn_tfrz0    =    3.e-3  !  top roughness [m] if ln_loglayer=T
+   ln_tfr2d    = .false.   !  horizontal variation of the top friction coef (read a 2D mask file )
+   rn_tfrien   =    50.    !  local multiplying factor of tfr (ln_tfr2d=T)
+
+   ln_bfrimp   = .true.    !  implicit bottom friction (requires ln_zdfexp = .false. if true)
+   ln_loglayer = .false.   !  logarithmic formulation (non linear case)
+/
+!-----------------------------------------------------------------------
+&nambbc        !   bottom temperature boundary condition
+!-----------------------------------------------------------------------
+!              !                              !  (if <0  months)  !  
+!              !  file name      ! frequency (hours) ! variable   ! time interp.   !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !                 !  (if <0  months)  !   name     !   (logical)    !  (T/F ) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_qgh      ='geothermal_heating.nc',  -12.  , 'heatflow'      ,   .false.      , .true.  , 'yearly'  , ''       , ''       , ''
+   !
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   ln_trabbc   = .true.    !  Apply a geothermal heating at the ocean bottom
+   nn_geoflx   =    2      !  geothermal heat flux: = 0 no flux
+                           !     = 1 constant flux
+                           !     = 2 variable flux (read in geothermal_heating.nc in mW/m2)
+   rn_geoflx_cst = 86.4e-3 !  Constant value of geothermal heat flux [W/m2]
+
+/
+!-----------------------------------------------------------------------
+&nambbl        !   bottom boundary layer scheme
+!-----------------------------------------------------------------------
+   nn_bbl_ldf  =  1      !  diffusive bbl (=1)   or not (=0)
+   nn_bbl_adv  =  0      !  advective bbl (=1/2) or not (=0)
+   rn_ahtbbl   =  1000.  !  lateral mixing coefficient in the bbl  [m2/s]
+   rn_gambbl   =  10.    !  advective bbl coefficient                 [s]
+/
+
+!!======================================================================
+!!                        Tracer (T & S ) namelists
+!!======================================================================
+!!   nameos        equation of state
+!!   namtra_adv    advection scheme
+!!   namtra_adv_mle   mixed layer eddy param. (Fox-Kemper param.)
+!!   namtra_ldf    lateral diffusion scheme
+!!   namtra_dmp    T & S newtonian damping
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&nameos        !   ocean physical parameters
+!-----------------------------------------------------------------------
+   nn_eos      =  -1     !  type of equation of state and Brunt-Vaisala frequency
+                                 !  =-1, TEOS-10
+                                 !  = 0, EOS-80
+                                 !  = 1, S-EOS   (simplified eos)
+   ln_useCT    = .true.  ! use of Conservative Temp. ==> surface CT converted in Pot. Temp. in sbcssm
+   !                             !
+   !                     ! S-EOS coefficients :
+   !                             !  rd(T,S,Z)*rau0 = -a0*(1+.5*lambda*dT+mu*Z+nu*dS)*dT+b0*dS
+   rn_a0       =  1.6550e-1      !  thermal expension coefficient (nn_eos= 1)
+   rn_b0       =  7.6554e-1      !  saline  expension coefficient (nn_eos= 1)
+   rn_lambda1  =  5.9520e-2      !  cabbeling coeff in T^2  (=0 for linear eos)
+   rn_lambda2  =  7.4914e-4      !  cabbeling coeff in S^2  (=0 for linear eos)
+   rn_mu1      =  1.4970e-4      !  thermobaric coeff. in T (=0 for linear eos)
+   rn_mu2      =  1.1090e-5      !  thermobaric coeff. in S (=0 for linear eos)
+   rn_nu       =  2.4341e-3      !  cabbeling coeff in T*S  (=0 for linear eos)
+/
+!-----------------------------------------------------------------------
+&namtra_adv    !   advection scheme for tracer
+!-----------------------------------------------------------------------
+   ln_traadv_cen2   =  .false.   !  2nd order centered scheme
+   ln_traadv_tvd    =  .true.    !  TVD scheme
+   ln_traadv_muscl  =  .false.   !  MUSCL scheme
+   ln_traadv_muscl2 =  .false.   !  MUSCL2 scheme + cen2 at boundaries
+   ln_traadv_ubs    =  .false.   !  UBS scheme
+   ln_traadv_qck    =  .false.   !  QUICKEST scheme
+   ln_traadv_msc_ups=  .false.   !  use upstream scheme within muscl
+   ln_traadv_tvd_zts=  .false.  !  TVD scheme with sub-timestepping of vertical tracer advection
+/
+!-----------------------------------------------------------------------
+&namtra_adv_mle !   mixed layer eddy parametrisation (Fox-Kemper param)
+!-----------------------------------------------------------------------
+   ln_mle    = .true.      ! (T) use the Mixed Layer Eddy (MLE) parameterisation
+   rn_ce     = 0.06        ! magnitude of the MLE (typical value: 0.06 to 0.08)
+   nn_mle    = 1           ! MLE type: =0 standard Fox-Kemper ; =1 new formulation
+   rn_lf     = 5.e+3       ! typical scale of mixed layer front (meters)                      (case rn_mle=0)
+   rn_time   = 172800.     ! time scale for mixing momentum across the mixed layer (seconds)  (case rn_mle=0)
+   rn_lat    = 20.         ! reference latitude (degrees) of MLE coef.                        (case rn_mle=1)
+   nn_mld_uv = 0           ! space interpolation of MLD at u- & v-pts (0=min,1=averaged,2=max)
+   nn_conv   = 0           ! =1 no MLE in case of convection ; =0 always MLE
+   rn_rho_c_mle  = 0.01    ! delta rho criterion used to calculate MLD for FK
+/
+!----------------------------------------------------------------------------------
+&namtra_ldf    !   lateral diffusion scheme for tracers
+!----------------------------------------------------------------------------------
+   !                       !  Operator type:
+   ln_traldf_lap    =  .true.   !  laplacian operator
+   ln_traldf_bilap  =  .false.  !  bilaplacian operator
+   !                       !  Direction of action:
+   ln_traldf_level  =  .false.  !  iso-level
+   ln_traldf_hor    =  .false.  !  horizontal (geopotential)   (needs "key_ldfslp" when ln_sco=T)
+   ln_traldf_iso    =  .true.   !  iso-neutral                 (needs "key_ldfslp")
+   !		       	   !  Griffies parameters              (all need "key_ldfslp")
+   ln_traldf_grif   =  .false.  !  use griffies triads
+   ln_traldf_gdia   =  .false.  !  output griffies eddy velocities
+   ln_triad_iso     =  .false.  !  pure lateral mixing in ML
+   ln_botmix_grif   =  .false.  !  lateral mixing on bottom
+   !                       !  Coefficients
+   ! Eddy-induced (GM) advection always used with Griffies; otherwise needs "key_traldf_eiv"
+   ! Value rn_aeiv_0 is ignored unless = 0 with Held-Larichev spatially varying aeiv
+   !                                  (key_traldf_c2d & key_traldf_eiv & key_orca_r2, _r1 or _r05)
+   rn_aeiv_0        =  2000.    !  eddy induced velocity coefficient [m2/s]
+   rn_aht_0         =  2000.    !  horizontal eddy diffusivity for tracers [m2/s]
+   rn_ahtb_0        =     0.    !  background eddy diffusivity for ldf_iso [m2/s]
+   !                                           (normally=0; not used with Griffies)
+   rn_slpmax        =     0.01  !  slope limit
+   rn_chsmag        =     1.    !  multiplicative factor in Smagorinsky diffusivity
+   rn_smsh          =     1.    !  Smagorinsky diffusivity: = 0 - use only sheer
+   rn_aht_m         =  2000.    !  upper limit or stability criteria for lateral eddy diffusivity (m2/s)
+/
+!-----------------------------------------------------------------------
+&namtra_dmp    !   tracer: T & S newtonian damping
+!-----------------------------------------------------------------------
+   ln_tradmp   =  .true.   !  add a damping termn (T) or not (F)
+   nn_zdmp     =    0      !  vertical   shape =0    damping throughout the water column
+                           !                   =1 no damping in the mixing layer (kz  criteria)
+                           !                   =2 no damping in the mixed  layer (rho crieria)
+   cn_resto    = 'resto.nc' ! Name of file containing restoration coefficient field (use dmp_tools to create this)
+/
+
+!!======================================================================
+!!                      ***  Dynamics namelists  ***
+!!======================================================================
+!!   namdyn_adv    formulation of the momentum advection
+!!   namdyn_vor    advection scheme
+!!   namdyn_hpg    hydrostatic pressure gradient
+!!   namdyn_spg    surface pressure gradient                            (CPP key only)
+!!   namdyn_ldf    lateral diffusion scheme
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namdyn_adv    !   formulation of the momentum advection
+!-----------------------------------------------------------------------
+   ln_dynadv_vec = .true.  !  vector form (T) or flux form (F)
+   nn_dynkeg     = 0       ! scheme for grad(KE): =0   C2  ;  =1   Hollingsworth correction
+   ln_dynadv_cen2= .false. !  flux form - 2nd order centered scheme
+   ln_dynadv_ubs = .false. !  flux form - 3rd order UBS      scheme
+   ln_dynzad_zts = .false. !  Use (T) sub timestepping for vertical momentum advection
+/
+!-----------------------------------------------------------------------
+&nam_vvl    !   vertical coordinate options
+!-----------------------------------------------------------------------
+   ln_vvl_zstar  = .true.           !  zstar vertical coordinate
+   ln_vvl_ztilde = .false.          !  ztilde vertical coordinate: only high frequency variations
+   ln_vvl_layer  = .false.          !  full layer vertical coordinate
+   ln_vvl_ztilde_as_zstar = .false. !  ztilde vertical coordinate emulating zstar
+   ln_vvl_zstar_at_eqtor = .false.  !  ztilde near the equator
+   rn_ahe3       = 0.0e0            !  thickness diffusion coefficient
+   rn_rst_e3t    = 30.e0            !  ztilde to zstar restoration timescale [days]
+   rn_lf_cutoff  = 5.0e0            !  cutoff frequency for low-pass filter  [days]
+   rn_zdef_max   = 0.9e0            !  maximum fractional e3t deformation
+   ln_vvl_dbg    = .true.           !  debug prints    (T/F)
+/
+!-----------------------------------------------------------------------
+&namdyn_vor    !   option of physics/algorithm (not control by CPP keys)
+!-----------------------------------------------------------------------
+   ln_dynvor_ene = .false. !  enstrophy conserving scheme
+   ln_dynvor_ens = .false. !  energy conserving scheme
+   ln_dynvor_mix = .false. !  mixed scheme
+   ln_dynvor_een = .true.  !  energy & enstrophy scheme
+   ln_dynvor_een_old = .false.  !  energy & enstrophy scheme - original formulation
+/
+!-----------------------------------------------------------------------
+&namdyn_hpg    !   Hydrostatic pressure gradient option
+!-----------------------------------------------------------------------
+   ln_hpg_zco  = .false.   !  z-coordinate - full steps
+   ln_hpg_zps  = .true.    !  z-coordinate - partial steps (interpolation)
+   ln_hpg_sco  = .false.   !  s-coordinate (standard jacobian formulation)
+   ln_hpg_isf  = .false.   !  s-coordinate (sco ) adapted to isf
+   ln_hpg_djc  = .false.   !  s-coordinate (Density Jacobian with Cubic polynomial)
+   ln_hpg_prj  = .false.   !  s-coordinate (Pressure Jacobian scheme)
+   ln_dynhpg_imp = .false. !  time stepping: semi-implicit time scheme  (T)
+                                 !           centered      time scheme  (F)
+/
+!-----------------------------------------------------------------------
+!namdyn_spg    !   surface pressure gradient   (CPP key only)
+!-----------------------------------------------------------------------
+!                          !  explicit free surface                     ("key_dynspg_exp")
+!                          !  filtered free surface                     ("key_dynspg_flt")
+!                          !  split-explicit free surface               ("key_dynspg_ts")
+
+!-----------------------------------------------------------------------
+&namdyn_ldf    !   lateral diffusion on momentum
+!-----------------------------------------------------------------------
+   !                       !  Type of the operator :
+   ln_dynldf_lap    =  .true.   !  laplacian operator
+   ln_dynldf_bilap  =  .false.  !  bilaplacian operator
+   !                       !  Direction of action  :
+   ln_dynldf_level  =  .false.  !  iso-level
+   ln_dynldf_hor    =  .true.   !  horizontal (geopotential)            (require "key_ldfslp" in s-coord.)
+   ln_dynldf_iso    =  .false.  !  iso-neutral                          (require "key_ldfslp")
+   !                       !  Coefficient
+   rn_ahm_0_lap     = 40000.    !  horizontal laplacian eddy viscosity   [m2/s]
+   rn_ahmb_0        =     0.    !  background eddy viscosity for ldf_iso [m2/s]
+   rn_ahm_0_blp     =     0.    !  horizontal bilaplacian eddy viscosity [m4/s]
+   rn_cmsmag_1      =     3.    !  constant in laplacian Smagorinsky viscosity
+   rn_cmsmag_2      =     3     !  constant in bilaplacian Smagorinsky viscosity
+   rn_cmsh          =     1.    !  1 or 0 , if 0 -use only shear for Smagorinsky viscosity
+   rn_ahm_m_blp     =    -1.e12 !  upper limit for bilap  abs(ahm) < min( dx^4/128rdt, rn_ahm_m_blp)
+   rn_ahm_m_lap     = 40000.    !  upper limit for lap  ahm < min(dx^2/16rdt, rn_ahm_m_lap)
+/
+
+!!======================================================================
+!!             Tracers & Dynamics vertical physics namelists
+!!======================================================================
+!!    namzdf        vertical physics
+!!    namzdf_ric    richardson number dependent vertical mixing         ("key_zdfric")
+!!    namzdf_tke    TKE dependent vertical mixing                       ("key_zdftke")
+!!    namzdf_kpp    KPP dependent vertical mixing                       ("key_zdfkpp")
+!!    namzdf_ddm    double diffusive mixing parameterization            ("key_zdfddm")
+!!    namzdf_tmx    tidal mixing parameterization                       ("key_zdftmx")
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namzdf        !   vertical physics
+!-----------------------------------------------------------------------
+   rn_avm0     =   1.2e-4  !  vertical eddy viscosity   [m2/s]          (background Kz if not "key_zdfcst")
+   rn_avt0     =   1.2e-5  !  vertical eddy diffusivity [m2/s]          (background Kz if not "key_zdfcst")
+   nn_avb      =    0      !  profile for background avt & avm (=1) or not (=0)
+   nn_havtb    =    0      !  horizontal shape for avtb (=1) or not (=0)
+   ln_zdfevd   = .true.    !  enhanced vertical diffusion (evd) (T) or not (F)
+   nn_evdm     =    0      !  evd apply on tracer (=0) or on tracer and momentum (=1)
+   rn_avevd    =  100.     !  evd mixing coefficient [m2/s]
+   ln_zdfnpc   = .false.   !  Non-Penetrative Convective algorithm (T) or not (F)
+   nn_npc      =    1            !  frequency of application of npc
+   nn_npcp     =  365            !  npc control print frequency
+   ln_zdfexp   = .false.   !  time-stepping: split-explicit (T) or implicit (F) time stepping
+   nn_zdfexp   =    3            !  number of sub-timestep for ln_zdfexp=T
+/
+!-----------------------------------------------------------------------
+&namzdf_ric    !   richardson number dependent vertical diffusion       ("key_zdfric" )
+!-----------------------------------------------------------------------
+   rn_avmri    = 100.e-4   !  maximum value of the vertical viscosity
+   rn_alp      =   5.      !  coefficient of the parameterization
+   nn_ric      =   2       !  coefficient of the parameterization
+   rn_ekmfc    =   0.7     !  Factor in the Ekman depth Equation
+   rn_mldmin   =   1.0     !  minimum allowable mixed-layer depth estimate (m)
+   rn_mldmax   =1000.0     !  maximum allowable mixed-layer depth estimate (m)
+   rn_wtmix    =  10.0     !  vertical eddy viscosity coeff [m2/s] in the mixed-layer
+   rn_wvmix    =  10.0     !  vertical eddy diffusion coeff [m2/s] in the mixed-layer
+   ln_mldw     = .true.    !  Flag to use or not the mized layer depth param.
+/
+!-----------------------------------------------------------------------
+&namzdf_tke    !   turbulent eddy kinetic dependent vertical diffusion  ("key_zdftke")
+!-----------------------------------------------------------------------
+   rn_ediff    =   0.1     !  coef. for vertical eddy coef. (avt=rn_ediff*mxl*sqrt(e) )
+   rn_ediss    =   0.7     !  coef. of the Kolmogoroff dissipation
+   rn_ebb      =  67.83    !  coef. of the surface input of tke (=67.83 suggested when ln_mxl0=T)
+   rn_emin     =   1.e-6   !  minimum value of tke [m2/s2]
+   rn_emin0    =   1.e-4   !  surface minimum value of tke [m2/s2]
+   rn_bshear   =   1.e-20  ! background shear (>0) currently a numerical threshold (do not change it)
+   nn_mxl      =   2       !  mixing length: = 0 bounded by the distance to surface and bottom
+                           !                 = 1 bounded by the local vertical scale factor
+                           !                 = 2 first vertical derivative of mixing length bounded by 1
+                           !                 = 3 as =2 with distinct disspipative an mixing length scale
+   nn_pdl      =   1       !  Prandtl number function of richarson number (=1, avt=pdl(Ri)*avm) or not (=0, avt=avm)
+   ln_mxl0     = .true.    !  surface mixing length scale = F(wind stress) (T) or not (F)
+   rn_mxl0     =   0.04    !  surface  buoyancy lenght scale minimum value
+   ln_lc       = .true.    !  Langmuir cell parameterisation (Axell 2002)
+   rn_lc       =   0.15    !  coef. associated to Langmuir cells
+   nn_etau     =   1       !  penetration of tke below the mixed layer (ML) due to internal & intertial waves
+                           !        = 0 no penetration
+                           !        = 1 add a tke source below the ML
+                           !        = 2 add a tke source just at the base of the ML
+                           !        = 3 as = 1 applied on HF part of the stress    ("key_oasis3")
+   rn_efr      =   0.05    !  fraction of surface tke value which penetrates below the ML (nn_etau=1 or 2)
+   nn_htau     =   1       !  type of exponential decrease of tke penetration below the ML
+                           !        = 0  constant 10 m length scale
+                           !        = 1  0.5m at the equator to 30m poleward of 40 degrees
+/
+!------------------------------------------------------------------------
+&namzdf_kpp    !   K-Profile Parameterization dependent vertical mixing  ("key_zdfkpp", and optionally:
+!------------------------------------------------------------------------ "key_kppcustom" or "key_kpplktb")
+   ln_kpprimix = .true.    !  shear instability mixing
+   rn_difmiw   =  1.0e-04  !  constant internal wave viscosity [m2/s]
+   rn_difsiw   =  0.1e-04  !  constant internal wave diffusivity [m2/s]
+   rn_riinfty  =  0.8      !  local Richardson Number limit for shear instability
+   rn_difri    =  0.0050   !  maximum shear mixing at Rig = 0    [m2/s]
+   rn_bvsqcon  = -0.01e-07 !  Brunt-Vaisala squared for maximum convection [1/s2]
+   rn_difcon   =  1.       !  maximum mixing in interior convection [m2/s]
+   nn_avb      =  0        !  horizontal averaged (=1) or not (=0) on avt and amv
+   nn_ave      =  1        !  constant (=0) or profile (=1) background on avt
+/
+!-----------------------------------------------------------------------
+&namzdf_gls                !   GLS vertical diffusion                   ("key_zdfgls")
+!-----------------------------------------------------------------------
+   rn_emin       = 1.e-7   !  minimum value of e   [m2/s2]
+   rn_epsmin     = 1.e-12  !  minimum value of eps [m2/s3]
+   ln_length_lim = .true.  !  limit on the dissipation rate under stable stratification (Galperin et al., 1988)
+   rn_clim_galp  = 0.267   !  galperin limit
+   ln_sigpsi     = .true.  !  Activate or not Burchard 2001 mods on psi schmidt number in the wb case
+   rn_crban      = 100.    !  Craig and Banner 1994 constant for wb tke flux
+   rn_charn      = 70000.  !  Charnock constant for wb induced roughness length
+   rn_hsro       =  0.02   !  Minimum surface roughness
+   rn_frac_hs    =   1.3   !  Fraction of wave height as roughness (if nn_z0_met=2)
+   nn_z0_met     =     2   !  Method for surface roughness computation (0/1/2)
+   nn_bc_surf    =     1   !  surface condition (0/1=Dir/Neum)
+   nn_bc_bot     =     1   !  bottom condition (0/1=Dir/Neum)
+   nn_stab_func  =     2   !  stability function (0=Galp, 1= KC94, 2=CanutoA, 3=CanutoB)
+   nn_clos       =     1   !  predefined closure type (0=MY82, 1=k-eps, 2=k-w, 3=Gen)
+/
+!-----------------------------------------------------------------------
+&namzdf_ddm    !   double diffusive mixing parameterization             ("key_zdfddm")
+!-----------------------------------------------------------------------
+   rn_avts     = 1.e-4     !  maximum avs (vertical mixing on salinity)
+   rn_hsbfr    = 1.6       !  heat/salt buoyancy flux ratio
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx    !   tidal mixing parameterization                        ("key_zdftmx")
+!-----------------------------------------------------------------------
+   rn_htmx     = 500.      !  vertical decay scale for turbulence (meters)
+   rn_n2min    = 1.e-8     !  threshold of the Brunt-Vaisala frequency (s-1)
+   rn_tfe      = 0.333     !  tidal dissipation efficiency
+   rn_me       = 0.2       !  mixing efficiency
+   ln_tmx_itf  = .true.    !  ITF specific parameterisation
+   rn_tfe_itf  = 1.        !  ITF tidal dissipation efficiency
+/
+
+!!======================================================================
+!!                  ***  Miscellaneous namelists  ***
+!!======================================================================
+!!   namsol            elliptic solver / island / free surface
+!!   nammpp            Massively Parallel Processing                    ("key_mpp_mpi)
+!!   namctl            Control prints & Benchmark
+!!   namc1d            1D configuration options                         ("key_c1d")
+!!   namc1d_uvd        data: U & V currents                             ("key_c1d")
+!!   namc1d_dyndmp     U & V newtonian damping                          ("key_c1d")
+!!   namsto            Stochastic parametrization of EOS
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namsol        !   elliptic solver / island / free surface
+!-----------------------------------------------------------------------
+   nn_solv     =      1    !  elliptic solver: =1 preconditioned conjugate gradient (pcg)
+                           !                   =2 successive-over-relaxation (sor)
+   nn_sol_arp  =      0    !  absolute/relative (0/1) precision convergence test
+   rn_eps      =  1.e-6    !  absolute precision of the solver
+   nn_nmin     =    300    !  minimum of iterations for the SOR solver
+   nn_nmax     =    800    !  maximum of iterations for the SOR solver
+   nn_nmod     =     10    !  frequency of test for the SOR solver
+   rn_resmax   =  1.e-10   !  absolute precision for the SOR solver
+   rn_sor      =  1.92     !  optimal coefficient for SOR solver (to be adjusted with the domain)
+/
+!-----------------------------------------------------------------------
+&nammpp        !   Massively Parallel Processing                        ("key_mpp_mpi)
+!-----------------------------------------------------------------------
+   cn_mpi_send =  'I'      !  mpi send/recieve type   ='S', 'B', or 'I' for standard send,
+                           !  buffer blocking send or immediate non-blocking sends, resp.
+   nn_buffer   =   0       !  size in bytes of exported buffer ('B' case), 0 no exportation
+   ln_nnogather=  .false.  !  activate code to avoid mpi_allgather use at the northfold
+   jpni        =   0       !  jpni   number of processors following i (set automatically if < 1)
+   jpnj        =   0       !  jpnj   number of processors following j (set automatically if < 1)
+   jpnij       =   0       !  jpnij  number of local domains (set automatically if < 1)
+/
+!-----------------------------------------------------------------------
+&namctl        !   Control prints & Benchmark
+!-----------------------------------------------------------------------
+   ln_ctl      = .false.   !  trends control print (expensive!)
+   nn_print    =    0      !  level of print (0 no extra print)
+   nn_ictls    =    0      !  start i indice of control sum (use to compare mono versus
+   nn_ictle    =    0      !  end   i indice of control sum        multi processor runs
+   nn_jctls    =    0      !  start j indice of control               over a subdomain)
+   nn_jctle    =    0      !  end   j indice of control
+   nn_isplt    =    1      !  number of processors in i-direction
+   nn_jsplt    =    1      !  number of processors in j-direction
+   nn_bench    =    0      !  Bench mode (1/0): CAUTION use zero except for bench
+                           !     (no physical validity of the results)
+   nn_timing   =    0      !  timing by routine activated (=1) creates timing.output file, or not (=0)
+/
+!-----------------------------------------------------------------------
+&namc1d_uvd    !   data: U & V currents                                 ("key_c1d")
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_ucur     = 'ucurrent'  ,         -1        ,'u_current',   .false.    , .true. , 'monthly' ,  ''      ,  'Ume'   , ''
+   sn_vcur     = 'vcurrent'  ,         -1        ,'v_current',   .false.    , .true. , 'monthly' ,  ''      ,  'Vme'   , ''
+!
+   cn_dir        = './'    !  root directory for the location of the files
+   ln_uvd_init   = .false. !  Initialisation of ocean U & V with U & V input data (T) or not (F)
+   ln_uvd_dyndmp = .false. !  damping of ocean U & V toward U & V input data (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namc1d_dyndmp !   U & V newtonian damping                              ("key_c1d")
+!-----------------------------------------------------------------------
+   ln_dyndmp   =  .false.  !  add a damping term (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namsto       ! Stochastic parametrization of EOS
+!-----------------------------------------------------------------------
+   ln_rststo = .false.           ! start from mean parameter (F) or from restart file (T)
+   ln_rstseed = .true.           ! read seed of RNG from restart file
+   cn_storst_in  = "restart_sto" !  suffix of stochastic parameter restart file (input)
+   cn_storst_out = "restart_sto" !  suffix of stochastic parameter restart file (output)
+
+   ln_sto_eos = .false.          ! stochastic equation of state
+   nn_sto_eos = 1                ! number of independent random walks
+   rn_eos_stdxy = 1.4            ! random walk horz. standard deviation (in grid points)
+   rn_eos_stdz  = 0.7            ! random walk vert. standard deviation (in grid points)
+   rn_eos_tcor  = 1440.0         ! random walk time correlation (in timesteps)
+   nn_eos_ord  = 1               ! order of autoregressive processes
+   nn_eos_flt  = 0               ! passes of Laplacian filter
+   rn_eos_lim  = 2.0             ! limitation factor (default = 3.0)
+/
+
+!!======================================================================
+!!                  ***  Diagnostics namelists  ***
+!!======================================================================
+!!   namnc4       netcdf4 chunking and compression settings             ("key_netcdf4")
+!!   namtrd       dynamics and/or tracer trends
+!!   namptr       Poleward Transport Diagnostics
+!!   namflo       float parameters                                      ("key_float")
+!!   namhsb       Heat and salt budgets
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namnc4        !   netcdf4 chunking and compression settings            ("key_netcdf4")
+!-----------------------------------------------------------------------
+   nn_nchunks_i=   4       !  number of chunks in i-dimension
+   nn_nchunks_j=   4       !  number of chunks in j-dimension
+   nn_nchunks_k=   31      !  number of chunks in k-dimension
+                           !  setting nn_nchunks_k = jpk will give a chunk size of 1 in the vertical which
+                           !  is optimal for postprocessing which works exclusively with horizontal slabs
+   ln_nc4zip   = .true.    !  (T) use netcdf4 chunking and compression
+                           !  (F) ignore chunking information and produce netcdf3-compatible files
+/
+!-----------------------------------------------------------------------
+&namtrd        !   diagnostics on dynamics and/or tracer trends
+!              !       and/or mixed-layer trends and/or barotropic vorticity
+!-----------------------------------------------------------------------
+   ln_glo_trd  = .false.   ! (T) global domain averaged diag for T, T^2, KE, and PE
+   ln_dyn_trd  = .false.   ! (T) 3D momentum trend output
+   ln_dyn_mxl  = .FALSE.   ! (T) 2D momentum trends averaged over the mixed layer (not coded yet)
+   ln_vor_trd  = .FALSE.   ! (T) 2D barotropic vorticity trends (not coded yet)
+   ln_KE_trd   = .false.   ! (T) 3D Kinetic   Energy     trends
+   ln_PE_trd   = .false.   ! (T) 3D Potential Energy     trends
+   ln_tra_trd  = .FALSE.   ! (T) 3D tracer trend output
+   ln_tra_mxl  = .false.   ! (T) 2D tracer trends averaged over the mixed layer (not coded yet)
+   nn_trd      = 365       !  print frequency (ln_glo_trd=T) (unit=time step)
+/
+!!gm   nn_ctls     =   0       !  control surface type in mixed-layer trends (0,1 or n<jpk)
+!!gm   rn_ucf      =   1.      !  unit conversion factor (=1 -> /seconds ; =86400. -> /day)
+!!gm   cn_trdrst_in      = "restart_mld"   ! suffix of ocean restart name (input)
+!!gm   cn_trdrst_out     = "restart_mld"   ! suffix of ocean restart name (output)
+!!gm   ln_trdmld_restart = .false.         !  restart for ML diagnostics
+!!gm   ln_trdmld_instant = .false.         !  flag to diagnose trends of instantantaneous or mean ML T/S
+!!gm
+!-----------------------------------------------------------------------
+&namflo       !   float parameters                                      ("key_float")
+!-----------------------------------------------------------------------
+   jpnfl         = 1          !  total number of floats during the run
+   jpnnewflo     = 0          !  number of floats for the restart
+   ln_rstflo     = .false.    !  float restart (T) or not (F)
+   nn_writefl    =      75    !  frequency of writing in float output file
+   nn_stockfl    =    5475    !  frequency of creation of the float restart file
+   ln_argo       = .false.    !  Argo type floats (stay at the surface each 10 days)
+   ln_flork4     = .false.    !  trajectories computed with a 4th order Runge-Kutta (T)
+                              !  or computed with Blanke' scheme (F)
+   ln_ariane     = .true.     !  Input with Ariane tool convention(T)
+   ln_flo_ascii  = .true.     !  Output with Ariane tool netcdf convention(F) or ascii file (T)
+/
+!-----------------------------------------------------------------------
+&namptr       !   Poleward Transport Diagnostic
+!-----------------------------------------------------------------------
+   ln_diaptr  = .false.    !  Poleward heat and salt transport (T) or not (F)
+   ln_subbas  = .false.     !  Atlantic/Pacific/Indian basins computation (T) or not
+/
+!-----------------------------------------------------------------------
+&namhsb       !  Heat and salt budgets
+!-----------------------------------------------------------------------
+   ln_diahsb  = .false.    !  check the heat and salt budgets (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&nam_diaharm   !   Harmonic analysis of tidal constituents ('key_diaharm')
+!-----------------------------------------------------------------------
+    nit000_han = 1         ! First time step used for harmonic analysis
+    nitend_han = 75        ! Last time step used for harmonic analysis
+    nstep_han  = 15        ! Time step frequency for harmonic analysis
+    tname(1)   = 'M2'      ! Name of tidal constituents
+    tname(2)   = 'K1'
+/
+!-----------------------------------------------------------------------
+&namdct        ! transports through sections
+!-----------------------------------------------------------------------
+    nn_dct      = 15       !  time step frequency for transports computing
+    nn_dctwri   = 15       !  time step frequency for transports writing
+    nn_secdebug = 112      !      0 : no section to debug
+                           !     -1 : debug all section
+                           !  0 < n : debug section number n
+/
+
+!!======================================================================
+!!            ***  Observation & Assimilation namelists ***
+!!======================================================================
+!!   namobs       observation and model comparison                      ('key_diaobs')
+!!   nam_asminc   assimilation increments                               ('key_asminc')
+!!======================================================================
+!
+!-----------------------------------------------------------------------
+&namobs       !  observation usage switch                               ('key_diaobs')
+!-----------------------------------------------------------------------
+   ln_t3d     = .false.    ! Logical switch for T profile observations
+   ln_s3d     = .false.    ! Logical switch for S profile observations
+   ln_ena     = .false.    ! Logical switch for ENACT insitu data set
+   ln_cor     = .false.    ! Logical switch for Coriolis insitu data set
+   ln_profb   = .false.    ! Logical switch for feedback insitu data set
+   ln_sla     = .false.    ! Logical switch for SLA observations
+   ln_sladt   = .false.    ! Logical switch for AVISO SLA data
+   ln_slafb   = .false.    ! Logical switch for feedback SLA data
+   ln_ssh     = .false.    ! Logical switch for SSH observations
+   ln_sst     = .false.    ! Logical switch for SST observations
+   ln_reysst  = .false.    ! Logical switch for Reynolds observations
+   ln_ghrsst  = .false.    ! Logical switch for GHRSST observations
+   ln_sstfb   = .false.    ! Logical switch for feedback SST data
+   ln_sss     = .false.    ! Logical switch for SSS observations
+   ln_seaice  = .false.    ! Logical switch for Sea Ice observations
+   ln_vel3d   = .false.    ! Logical switch for velocity observations
+   ln_velavcur= .false     ! Logical switch for velocity daily av. cur.
+   ln_velhrcur= .false     ! Logical switch for velocity high freq. cur.
+   ln_velavadcp = .false.  ! Logical switch for velocity daily av. ADCP
+   ln_velhradcp = .false.  ! Logical switch for velocity high freq. ADCP
+   ln_velfb   = .false.    ! Logical switch for feedback velocity data
+   ln_grid_global = .false. ! Global distribtion of observations
+   ln_grid_search_lookup = .false. !  Logical switch for obs grid search w/lookup table
+   grid_search_file = 'grid_search'  !  Grid search lookup file header
+! All of the *files* variables below are arrays. Use namelist_cfg to add more files
+   enactfiles = 'enact.nc' !  ENACT input observation file names (specify full array in namelist_cfg)
+   coriofiles = 'corio.nc' !  Coriolis input observation file name
+   profbfiles = 'profiles_01.nc' ! Profile feedback input observation file name
+   ln_profb_enatim = .false !        Enact feedback input time setting switch
+   slafilesact = 'sla_act.nc' !  Active SLA input observation file names
+   slafilespas = 'sla_pass.nc' ! Passive SLA input observation file names
+   slafbfiles = 'sla_01.nc' ! slafbfiles: Feedback SLA input observation file names
+   sstfiles = 'ghrsst.nc'   ! GHRSST input observation file names
+   sstfbfiles = 'sst_01.nc' ! Feedback SST input observation file names
+   seaicefiles = 'seaice_01.nc' ! Sea Ice input observation file names
+   velavcurfiles = 'velavcurfile.nc'  ! Vel. cur. daily av. input file name
+   velhrcurfiles = 'velhrcurfile.nc'  ! Vel. cur. high freq. input file name
+   velavadcpfiles = 'velavadcpfile.nc' ! Vel. ADCP daily av. input file name
+   velhradcpfiles = 'velhradcpfile.nc' ! Vel. ADCP high freq. input file name
+   velfbfiles = 'velfbfile.nc' ! Vel. feedback input observation file name
+   dobsini = 20000101.000000  !  Initial date in window YYYYMMDD.HHMMSS
+   dobsend = 20010101.000000  !  Final date in window YYYYMMDD.HHMMSS
+   n1dint = 0  !               Type of vertical interpolation method
+   n2dint = 0  !               Type of horizontal interpolation method
+   ln_nea = .false.   !        Rejection of observations near land switch
+   nmsshc     = 0     !        MSSH correction scheme
+   mdtcorr = 1.61     !        MDT  correction
+   mdtcutoff = 65.0   !        MDT cutoff for computed correction
+   ln_altbias = .false.    ! Logical switch for alt bias
+   ln_ignmis  = .true.     ! Logical switch for ignoring missing files
+   endailyavtypes = 820    ! ENACT daily average types - array (use namelist_cfg to set more values)
+   ln_grid_global = .true.
+   ln_grid_search_lookup = .false.
+/
+!-----------------------------------------------------------------------
+&nam_asminc   !   assimilation increments                               ('key_asminc')
+!-----------------------------------------------------------------------
+    ln_bkgwri = .false.    !  Logical switch for writing out background state
+    ln_trainc = .false.    !  Logical switch for applying tracer increments
+    ln_dyninc = .false.    !  Logical switch for applying velocity increments
+    ln_sshinc = .false.    !  Logical switch for applying SSH increments
+    ln_asmdin = .false.    !  Logical switch for Direct Initialization (DI)
+    ln_asmiau = .false.    !  Logical switch for Incremental Analysis Updating (IAU)
+    nitbkg    = 0          !  Timestep of background in [0,nitend-nit000-1]
+    nitdin    = 0          !  Timestep of background for DI in [0,nitend-nit000-1]
+    nitiaustr = 1          !  Timestep of start of IAU interval in [0,nitend-nit000-1]
+    nitiaufin = 15         !  Timestep of end of IAU interval in [0,nitend-nit000-1]
+    niaufn    = 0          !  Type of IAU weighting function
+    ln_salfix = .false.    !  Logical switch for ensuring that the sa > salfixmin
+    salfixmin = -9999      !  Minimum salinity after applying the increments
+    nn_divdmp = 0          !  Number of iterations of divergence damping operator
+/
+!-----------------------------------------------------------------------
+&namsbc_wave   ! External fields from wave model
+!-----------------------------------------------------------------------
+!              !  file name  ! frequency (hours) ! variable     ! time interp. !  clim   ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!              !             !  (if <0  months)  !   name       !   (logical)  !  (T/F)  ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_cdg      =  'cdg_wave' ,        1          , 'drag_coeff' ,     .true.   , .false. , 'daily'   ,  ''      , ''       , ''
+   sn_usd      =  'sdw_wave' ,        1          , 'u_sd2d'     ,     .true.   , .false. , 'daily'   ,  ''      , ''       , ''
+   sn_vsd      =  'sdw_wave' ,        1          , 'v_sd2d'     ,     .true.   , .false. , 'daily'   ,  ''      , ''       , ''
+   sn_wn       =  'sdw_wave' ,        1          , 'wave_num'   ,     .true.   , .false. , 'daily'   ,  ''      , ''       , ''
+!
+   cn_dir_cdg  = './'  !  root directory for the location of drag coefficient files
+/
+!-----------------------------------------------------------------------
+&namdyn_nept  !   Neptune effect (simplified: lateral and vertical diffusions removed)
+!-----------------------------------------------------------------------
+   ! Suggested lengthscale values are those of Eby & Holloway (1994) for a coarse model
+   ln_neptsimp       = .false.  ! yes/no use simplified neptune
+
+   ln_smooth_neptvel = .false.  ! yes/no smooth zunep, zvnep
+   rn_tslse          =  1.2e4   ! value of lengthscale L at the equator
+   rn_tslsp          =  3.0e3   ! value of lengthscale L at the pole
+   ! Specify whether to ramp down the Neptune velocity in shallow
+   ! water, and if so the depth range controlling such ramping down
+   ln_neptramp       = .true.   ! ramp down Neptune velocity in shallow water
+   rn_htrmin         =  100.0   ! min. depth of transition range
+   rn_htrmax         =  200.0   ! max. depth of transition range
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_top_ORCA2_cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_top_ORCA2_cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_top_ORCA2_cfg	(revision 5893)
@@ -0,0 +1,92 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/TOP1 :  Configuration namelist : used to overwrite defaults values defined in SHARED/namelist_top_ref
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!-----------------------------------------------------------------------
+&namtrc_run     !   run information
+!-----------------------------------------------------------------------
+   ln_rsttr      = _AUTO_
+   nn_rsttr      = _AUTO_
+   ln_top_euler  = .true.
+/
+!-----------------------------------------------------------------------
+&namtrc     !   tracers definition
+!-----------------------------------------------------------------------
+   ln_trcdta     =   .true.  !  Initialisation from data input file (T) or not (F)
+   ln_trcdmp_clo =  .true.   !  restoring on closed seas (T) or not (F) 
+
+!                !    name   !           title of the field              ! initial data ! initial data ! save   !
+!                !           !                                           !  units       ! from file    ! or not ! 
+!                !           !                                           !              ! or not       !        !
+   sn_tracer(1)   = 'DIC     ' , 'Dissolved inorganic Concentration      ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(2)   = 'Alkalini' , 'Total Alkalinity Concentration         ',  'eq/L '   ,  .true.     ,  .true.
+   sn_tracer(3)   = 'O2      ' , 'Dissolved Oxygen Concentration         ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(4)   = 'CaCO3   ' , 'Calcite Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(5)   = 'PO4     ' , 'Phosphate Concentration                ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(6)   = 'POC     ' , 'Small organic carbon Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(7)   = 'Si      ' , 'Silicate Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(8)   = 'PHY     ' , 'Nanophytoplankton Concentration        ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(9)   = 'ZOO     ' , 'Microzooplankton Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(10)  = 'DOC     ' , 'Dissolved organic Concentration        ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(11)  = 'PHY2    ' , 'Diatoms Concentration                  ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(12)  = 'ZOO2    ' , 'Mesozooplankton Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(13)  = 'DSi     ' , 'Diatoms Silicate Concentration         ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(14)  = 'Fer     ' , 'Dissolved Iron Concentration           ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(15)  = 'BFe     ' , 'Big iron particles Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(16)  = 'GOC     ' , 'Big organic carbon Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(17)  = 'SFe     ' , 'Small iron particles Concentration     ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(18)  = 'DFe     ' , 'Diatoms iron  Concentration            ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(19)  = 'GSi     ' , 'Sinking biogenic Silicate Concentration',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(20)  = 'NFe     ' , 'Nano iron Concentration                ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(21)  = 'NCHL    ' , 'Nano chlorophyl Concentration          ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(22)  = 'DCHL    ' , 'Diatoms chlorophyl Concentration       ',  'mol-C/L' ,  .false.    ,  .true.
+   sn_tracer(23)  = 'NO3     ' , 'Nitrates Concentration                 ',  'mol-C/L' ,  .true.     ,  .true.
+   sn_tracer(24)  = 'NH4     ' , 'Ammonium Concentration                 ',  'mol-C/L' ,  .false.    ,  .true.
+/
+!-----------------------------------------------------------------------
+&namtrc_dta      !    Initialisation from data input file
+!-----------------------------------------------------------------------
+!          !  file name  ! frequency (hours) ! variable  ! time interp. !  clim  ! 'yearly'/ ! weights  ! rotation ! land/sea mask !
+!          !             !  (if <0  months)  !   name    !   (logical)  !  (T/F) ! 'monthly' ! filename ! pairing  ! filename      !
+   sn_trcdta(1)  = 'data_DIC_nomask'        ,        -12        ,  'DIC'     ,    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(2)  = 'data_Alkalini_nomask'   ,        -12        ,  'Alkalini',    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(3)  = 'data_O2_nomask'         ,        -1         ,  'O2'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(5)  = 'data_PO4_nomask'        ,        -1         ,  'PO4'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(7)  = 'data_Si_nomask'         ,        -1         ,  'Si'      ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(10) = 'data_DOC_nomask'        ,        -12        ,  'DOC'     ,    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(14) = 'data_Fer_nomask'        ,        -12        ,  'Fer'     ,    .false.   , .true. , 'yearly'  , ''       , ''   , ''
+   sn_trcdta(23) = 'data_NO3_nomask'        ,        -1         ,  'NO3'     ,    .true.    , .true. , 'yearly'  , ''       , ''   , ''
+   rn_trfac(1)   =   1.0e-06  !  multiplicative factor
+   rn_trfac(2)   =   1.0e-06  !  -      -      -     -
+   rn_trfac(3)   =  44.6e-06  !  -      -      -     -
+   rn_trfac(5)   = 122.0e-06  !  -      -      -     -
+   rn_trfac(7)   =   1.0e-06  !  -      -      -     -
+   rn_trfac(10)  =   1.0      !  -      -      -     -
+   rn_trfac(14)  =   1.0      !  -      -      -     -
+   rn_trfac(23)  =   7.6e-06  !  -      -      -     -
+/
+!-----------------------------------------------------------------------
+&namtrc_adv    !   advection scheme for passive tracer 
+!-----------------------------------------------------------------------
+   ln_trcadv_tvd     =  .false.  !  TVD scheme
+   ln_trcadv_muscl   =  .true.   !  MUSCL scheme
+/
+!-----------------------------------------------------------------------
+&namtrc_ldf    !   lateral diffusion scheme for passive tracer 
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_zdf        !   vertical physics
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_rad        !  treatment of negative concentrations 
+!-----------------------------------------------------------------------
+/
+!-----------------------------------------------------------------------
+&namtrc_dia       !   parameters for passive tracer additional diagnostics
+!----------------------------------------------------------------------
+/
+!----------------------------------------------------------------------
+&namtrc_bc        !   data for boundary conditions
+!-----------------------------------------------------------------------
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_top_ref
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_top_ref	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/namelist_top_ref	(revision 5893)
@@ -0,0 +1,119 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/TOP1 :   - tracer run information                (namtrc_run)
+!!               - tracer definition                     (namtrc    )
+!!               - tracer data initialisation            (namtrc_dta)
+!!               - tracer advection                      (namtrc_adv)
+!!               - tracer lateral diffusion              (namtrc_ldf)
+!!               - tracer vertical physics               (namtrc_zdf)
+!!               - tracer newtonian damping              (namtrc_dmp)
+!!               - dynamical tracer trends               (namtrc_trd)
+!!               - tracer output diagonstics             (namtrc_dia)
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!-----------------------------------------------------------------------
+&namtrc_run     !   run information
+!-----------------------------------------------------------------------
+   nn_dttrc      =  1        !  time step frequency for passive sn_tracers
+   nn_writetrc   =  5475     !  time step frequency for sn_tracer outputs
+   ln_top_euler  = .false.    !  use Euler time-stepping for TOP
+   ln_rsttr      = .false.   !  start from a restart file (T) or not (F)
+   nn_rsttr      =   0       !  restart control = 0 initial time step is not compared to the restart file value
+                           !                  = 1 do not use the value in the restart file
+                           !                  = 2 calendar parameters read in the restart file
+   cn_trcrst_in  = "restart_trc"   !  suffix of pass. sn_tracer restart name (input)
+   cn_trcrst_indir = "."           !  directory from which to read input passive tracer restarts
+   cn_trcrst_out = "restart_trc"   !  suffix of pass. sn_tracer restart name (output)
+   cn_trcrst_outdir = "."          !  directory to which to write output passive tracer restarts
+/
+!-----------------------------------------------------------------------
+&namtrc     !   tracers definition
+!-----------------------------------------------------------------------
+   ln_trcdta     =   .true.  !  Initialisation from data input file (T) or not (F)
+   ln_trcdmp     =  .false.  !  add a damping termn (T) or not (F)
+   ln_trcdmp_clo =  .false.  !  restoring on closed seas (T) or not (F) 
+/
+!-----------------------------------------------------------------------
+&namtrc_dta      !    Initialisation from data input file
+!-----------------------------------------------------------------------
+!
+   cn_dir        =  './'      !  root directory for the location of the data files
+/
+!-----------------------------------------------------------------------
+&namtrc_adv    !   advection scheme for passive tracer 
+!-----------------------------------------------------------------------
+   ln_trcadv_cen2    =  .false.  !  2nd order centered scheme   
+   ln_trcadv_tvd     =  .true.  !  TVD scheme
+   ln_trcadv_muscl   =  .false.   !  MUSCL scheme
+   ln_trcadv_muscl2  =  .false.  !  MUSCL2 scheme + cen2 at boundaries
+   ln_trcadv_ubs     =  .false.  !  UBS scheme
+   ln_trcadv_qck     =  .false.  !  QUICKEST scheme
+   ln_trcadv_msc_ups =  .false.  !  use upstream scheme within muscl
+/
+!-----------------------------------------------------------------------
+&namtrc_ldf    !   lateral diffusion scheme for passive tracer 
+!-----------------------------------------------------------------------
+!                               !  Type of the operator : 
+   ln_trcldf_lap    =  .true.   !     laplacian operator       
+   ln_trcldf_bilap  =  .false.  !     bilaplacian operator     
+                                !  Direction of action  :
+   ln_trcldf_level  =  .false.  !     iso-level                
+   ln_trcldf_hor    =  .false.  !     horizontal (geopotential)         (require "key_ldfslp" when ln_sco=T)
+   ln_trcldf_iso    =  .true.   !     iso-neutral                       (require "key_ldfslp")
+!                               !  Coefficient
+   rn_ahtrc_0       =  2000.    !  horizontal eddy diffusivity for tracers [m2/s]
+   rn_ahtrb_0       =     0.    !     background eddy diffusivity for ldf_iso [m2/s]
+/
+!-----------------------------------------------------------------------
+&namtrc_zdf        !   vertical physics
+!-----------------------------------------------------------------------
+   ln_trczdf_exp   =  .false.  !  split explicit (T) or implicit (F) time stepping
+   nn_trczdf_exp   =   3       !  number of sub-timestep for ln_trczdfexp=T
+/
+!-----------------------------------------------------------------------
+&namtrc_rad        !  treatment of negative concentrations 
+!-----------------------------------------------------------------------
+   ln_trcrad   =  .true.  !  artificially correct negative concentrations (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namtrc_dmp    !   passive tracer newtonian damping   
+!-----------------------------------------------------------------------
+   nn_zdmp_tr  =    1      !  vertical   shape =0    damping throughout the water column
+                           !                   =1 no damping in the mixing layer (kz  criteria)
+                           !                   =2 no damping in the mixed  layer (rho crieria)
+   cn_resto_tr  = 'resto_tr.nc'    !  create a damping.coeff NetCDF file (=1) or not (=0)
+/
+!-----------------------------------------------------------------------
+&namtrc_ice       !    Representation of sea ice growth & melt effects
+!-----------------------------------------------------------------------
+   nn_ice_tr   =  -1        !  tracer concentration in sea ice 
+                           !    =-1 (no vvl: identical cc in ice and ocean / vvl: cc_ice = 0)
+                           !    = 0 (no vvl: cc_ice = zero / vvl: cc_ice = )
+                           !    = 1 prescribed to a namelist value (implemented in pisces only)
+/
+!-----------------------------------------------------------------------
+&namtrc_trd       !   diagnostics on tracer trends        ('key_trdtrc')
+!                          or mixed-layer trends          ('key_trdmld_trc')
+!----------------------------------------------------------------------
+   nn_trd_trc  =  5475      !  time step frequency and tracers trends
+   nn_ctls_trc =   0        !  control surface type in mixed-layer trends (0,1 or n<jpk)
+   rn_ucf_trc  =   1        !  unit conversion factor (=1 -> /seconds ; =86400. -> /day)
+   ln_trdmld_trc_restart = .false.  !  restart for ML diagnostics
+   ln_trdmld_trc_instant = .true.  !  flag to diagnose trends of instantantaneous or mean ML T/S
+   ln_trdtrc(1)  =   .true.
+   ln_trdtrc(2)  =   .true.
+   ln_trdtrc(23) =   .true.
+/
+!-----------------------------------------------------------------------
+&namtrc_dia       !   parameters for passive tracer additional diagnostics
+!----------------------------------------------------------------------
+   ln_diatrc     =  .true.   !  save additional diag. (T) or not (F)
+   ln_diabio     =  .true.   !  output biological trends
+   nn_writedia   =  5475     !  time step frequency for diagnostics
+   nn_writebio   =    10     !: frequency of biological outputs
+/
+!----------------------------------------------------------------------
+! namtrc_bc       !   data for boundary conditions
+!-----------------------------------------------------------------------
+&namtrc_bc
+!
+   cn_dir        =  './'      !  root directory for the location of the data files
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/orchidee.def_CWRR
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/orchidee.def_CWRR	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/orchidee.def_CWRR	(revision 5893)
@@ -0,0 +1,113 @@
+#
+#**************************************************************************
+#                    Parameter file list for ORCHIDEE
+#**************************************************************************
+
+# Input and output
+#**************************************************************************
+# Restart the time from the GCM. 
+# default = n
+SECHIBA_reset_time = y
+
+# Name of restart to read for initial conditions
+# default = NONE
+SECHIBA_restart_in = _AUTOBLOCKER_
+
+# Name of restart to read for initial conditions of STOMATE
+# default = NONE
+STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK = y
+
+# Writefrequency in seconds in sechiba_history.nc
+# default = 86400.0
+WRITE_STEP = 0
+
+# Hydrology parameters
+#**************************************************************************
+# Activate the multi-layer diffusion scheme adapted from CWRR
+# by default the Choisnel hydrology is used.
+# default = n
+HYDROL_CWRR = y
+
+# Activate river routing
+# default = n
+RIVER_ROUTING = y
+
+#**************************************************************************
+# Activate Stomate component
+# default = n
+STOMATE_OK_STOMATE = _AUTOBLOCKER_ 
+
+# Activate calculations of CO2 according to Farqhuar and Ball
+# default = n
+STOMATE_OK_CO2 = y
+
+# Use cdrag coefficient from gcm
+CDRAG_FROM_GCM = y
+
+# Interception reservoir coefficient.
+# default = 0.1
+SECHIBA_QSINT = 0.02
+
+#
+# Parameters related to vegetation map
+#**************************************************************************
+# Year of the land_use vegetation map readed
+# year off the pft map
+# default = 282
+VEGET_YEAR = 1
+
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+# default = y
+VEGET_REINIT = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update at this period if LAND_USE
+# default = 1Y
+VEGET_UPDATE = _AUTO_
+
+# Do not use default fire module
+FIRE_DISABLE = y
+
+# Create river description file
+RIVER_DESC = _AUTO_
+RIVER_DESC_FILE =  river_desc.nc
+
+# Parameters related to surface and thermal physical properties
+#************************************************************************
+# Read bare soil albedo from file with background MODIS data
+ALB_BG_MODIS = y
+ALB_BG_FILE  = alb_bg.nc
+
+# ROUGH_DYN :  Account for a dynamic roughness height
+ROUGH_DYN=n
+
+# OK_FREEZE :  Activate the complet soil freezing scheme
+OK_FREEZE=y
+
+# DEPTH_MAX_T (m) :  Maximum depth of the soil thermodynamics
+DEPTH_MAX_T=90
+
+# OK_EXPLICITSNOW :  Activate explict snow scheme
+OK_EXPLICITSNOW=y
+ 
+# READ_REFTEMP :  Initialize soil temperature using climatological temperature
+READ_REFTEMP=n
+
+# Parameters related to chemistry bvoc 
+#************************************************************************
+# CHEMISTRY_OK_BVOC :  Activate chemistry
+CHEMISTRY_BVOC = _AUTO_: DEFAULT=n
+
+# CO2 FOR BVOC - WILKINSON :  CO2 inhibition effect for isoprene based on Wilkinson approach?
+CO2_FOR_BVOC_WILKINSON=n
+
+# CO2 FOR BVOC - POSSELL :  CO2 inhibition effect for isoprene based on Possell approach?
+CO2_FOR_BVOC_POSSELL=n
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/orchidee.def_Choi
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/orchidee.def_Choi	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/orchidee.def_Choi	(revision 5893)
@@ -0,0 +1,103 @@
+#
+#**************************************************************************
+#                    Parameter file list for ORCHIDEE
+#**************************************************************************
+
+# Input and output
+#**************************************************************************
+# Restart the time from the GCM. 
+# default = n
+SECHIBA_reset_time = y
+
+# Name of restart to read for initial conditions
+# default = NONE
+SECHIBA_restart_in = _AUTOBLOCKER_
+
+# Name of restart to read for initial conditions of STOMATE
+# default = NONE
+STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK = y
+
+# Writefrequency in seconds in sechiba_history.nc
+# default = 86400.0
+WRITE_STEP = 0
+
+# Hydrology parameters
+#**************************************************************************
+# Activate the multi-layer diffusion scheme adapted from CWRR
+# by default the Choisnel hydrology is used.
+# default = n
+HYDROL_CWRR = n 
+
+# Total depth of soil reservoir
+# default = 2./4. depending on HYDROL_CWRR
+HYDROL_SOIL_DEPTH = 4.
+
+# Root profile
+HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+
+# Activate river routing
+# default = n
+RIVER_ROUTING = y
+
+#**************************************************************************
+# Activate Stomate component
+# default = n
+STOMATE_OK_STOMATE = _AUTOBLOCKER_ 
+
+# Activate calculations of CO2 according to Farqhuar and Ball
+# default = n
+STOMATE_OK_CO2 = y
+
+# Use cdrag coefficient from gcm
+CDRAG_FROM_GCM = y
+
+# Interception reservoir coefficient.
+# default = 0.1
+SECHIBA_QSINT = 0.02
+
+# Parmeters related to vegetation map
+#**************************************************************************
+# Year of the land_use vegetation map readed
+# year off the pft map
+# default = 282
+VEGET_YEAR = 1
+
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+# default = y
+VEGET_REINIT = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update at this period if LAND_USE
+# default = 1Y
+VEGET_UPDATE = _AUTO_
+
+# Take carbon from atmosphere if carbohydrate reserve too small, PFT dependent
+# Set to y for all pft except C4 grass (pft=11) and tropical C3 grass (pft=14)
+ALWAYS_INIT =  y, y, y, y, y, y, y, y, y, y, n, y, y, n, y
+
+# Do not use default fire module
+FIRE_DISABLE = y
+
+# Create river description file
+RIVER_DESC = _AUTO_
+RIVER_DESC_FILE =  river_desc.nc
+
+# Parameter related to chemistry bvoc 
+#************************************************************************
+# CHEMISTRY_OK_BVOC ([FLAG]) :  Activate chemistry    {OK_SECHIBA}
+# default =  n 
+CHEMISTRY_BVOC = _AUTO_: DEFAULT=n
+
+# CO2 FOR BVOC - WILKINSON ([FLAG]) :  CO2 inhibition effect for isoprene based on Wilkinson approach?    {CHEMISTRY_OK_BVOC }
+CO2_FOR_BVOC_WILKINSON=n
+
+# CO2 FOR BVOC - POSSELL ([FLAG]) :  CO2 inhibition effect for isoprene based on Possell approach?    {CHEMISTRY_OK_BVOC }
+CO2_FOR_BVOC_POSSELL=n
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_high
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_high	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_high	(revision 5893)
@@ -0,0 +1,131 @@
+#
+# Parametres fichiers de sortie
+#
+# Noms des fichiers
+phys_out_filenames=      histmth histday histhf   histhf3h  histhf3hm histstn
+# Sortir ou non les fichiers
+phys_out_filekeys= _AUTO_
+# Niveaux de sorties
+phys_out_filelevels=     5       5       5        5         5         5
+### Type de fichier : global (n) ou stations (y)
+phys_out_filestations =  n       n       n        n         n         y
+### Frequences des sorties
+phys_out_filetimesteps = 1.mth,  1.day,  0.25day, 0.125day, 0.125day, 1800.s
+#
+#
+### variables niveaux pressions 100, 50, 10 hPa a 3h-inst - F.Lott
+flag_t100       = 1, 7, 7, 5, 10, 10
+flag_u100       = 1, 7, 7, 5, 10, 10
+flag_v100       = 1, 7, 7, 5, 10, 10
+flag_w100       = 1, 7, 7, 5, 10, 10
+flag_t50        = 1, 7, 7, 5, 10, 10
+flag_u50        = 1, 7, 7, 5, 10, 10
+flag_v50        = 1, 7, 7, 5, 10, 10
+flag_w50        = 1, 7, 7, 5, 10, 10
+flag_t10        = 1, 7, 7, 5, 10, 10
+flag_u10        = 1, 7, 7, 5, 10, 10
+flag_v10        = 1, 7, 7, 5, 10, 10
+flag_w10        = 1, 7, 7, 5, 10, 10
+# more variables for level 5 histday/month: vitw and pres
+# Vertical wind
+flag_vitw         =  2, 3, 7, 6, 6, 6
+# Air pressure
+flag_pres         =  2, 3, 7, 6, 6, 6
+# w500 for histday
+flag_w500         =  1, 5, 3, 10, 10, 10
+# t700 for histday
+flag_t700         =  1, 5, 3, 10, 10, 10
+# Cloud fraction
+flag_rneb         =  2, 5, 10, 5, 10, 10
+# Aga sortie avec niveau 2
+flag_Aga          =  2, 10, 10, 10, 10, 10
+# niveaux maximum 5 mensuel pour variables CFMIP
+flag_rlu          =  5, 10, 10, 10, 10, 10
+flag_rsu          =  5, 10, 10, 10, 10, 10
+flag_rld          =  5, 10, 10, 10, 10, 10
+flag_rsd          =  5, 10, 10, 10, 10, 10
+flag_rlucs        =  5, 10, 10, 10, 10, 10
+flag_rsucs        =  5, 10, 10, 10, 10, 10
+flag_rldcs        =  5, 10, 10, 10, 10, 10
+flag_rsdcs        =  5, 10, 10, 10, 10, 10
+flag_tnt          =  5, 10, 10, 10, 10, 10
+flag_dtdyn        =  4, 10, 10, 10, 10, 10
+flag_dtphy        =  4, 10, 10, 10, 10, 10
+flag_dtlschr      =  5, 10, 10, 10, 10, 10
+flag_tntr         =  5, 10, 10, 10, 10, 10
+flag_tntc         =  5, 10, 10, 10, 10, 10
+flag_tntscpbl     =  5, 10, 10, 10, 10, 10
+flag_tnhus        =  5, 10, 10, 10, 10, 10
+flag_dqdyn        =  4, 10, 10, 10, 10, 10
+flag_tnhusc       =  5, 10, 10, 10, 10, 10
+flag_dqvdf        =  5, 10, 10, 10, 10, 10
+flag_tnhusscpbl   =  5, 10, 10, 10, 10, 10
+flag_dqphy        =  2, 10, 10, 10, 10, 10
+flag_evu          =  5, 10, 10, 10, 10, 10
+flag_kz           =  4, 10, 10, 10, 10, 10
+###
+# more variables for t tendency monthly
+###
+flag_dtvdf        =  5, 10, 10, 10, 10, 10
+flag_dteva        =  5, 10, 10, 10, 10, 10
+flag_dtcon        =  4, 10, 10, 10, 10, 10
+flag_dtajs        =  4, 10, 10, 10, 10, 10
+flag_dtlsc        =  4, 10, 10, 10, 10, 10
+flag_dtoro        =  4, 10, 10, 10, 10, 10
+flag_dtlif        =  4, 10, 10, 10, 10, 10
+flag_dthin        =  4, 10, 10, 10, 10, 10
+flag_dtec         =  4, 10, 10, 10, 10, 10
+### more variables for q tendency monthly
+flag_dqeva        =  5, 10, 10, 10, 10, 10
+flag_dqcon        =  4, 10, 10, 10, 10, 10
+flag_dqajs        =  4, 10, 10, 10, 10, 10
+flag_dqlsc        =  5, 10, 10, 10, 10, 10
+### nouvelle physique monthly
+flag_dtthe        =  4, 10, 10, 10, 10, 10
+flag_dtwak        =  4, 5, 10, 10, 10, 10
+flag_dqthe        =  4, 10, 10, 10, 10, 10
+flag_dqwak        =  4, 5, 10, 10, 10, 10
+flag_ftime_th     =  4, 10, 10, 5, 10, 10
+#
+# Parametres niveau de sorties differents fichiers
+#
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = _AUTO_
+
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp= _AUTO_
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP= _AUTO_
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP= _AUTO_
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP= _AUTO_
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP= _AUTO_
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_low
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_low	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_low	(revision 5893)
@@ -0,0 +1,60 @@
+#
+# Parametres fichiers de sortie
+#
+# Noms des fichiers
+phys_out_filenames=      histmth histday histhf   histhf3h  histhf3hm histstn
+# Sortir ou non les fichiers
+phys_out_filekeys=  _AUTO_
+# Niveaux de sorties
+phys_out_filelevels=     5       2       2        5         5         5
+### Type de fichier : global (n) ou stations (y)
+phys_out_filestations =  n       n       n        n         n         y
+### Frequences des sorties
+phys_out_filetimesteps = 1.mth,  1.day,  0.25day, 0.125day, 0.125day, 1800.s
+#
+#
+# Parametres niveau de sorties differents fichiers
+#
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = _AUTO_
+
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp= _AUTO_
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP= _AUTO_
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP= _AUTO_
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP= _AUTO_
+
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP= _AUTO_
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
+
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_medium
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_medium	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/output.def_medium	(revision 5893)
@@ -0,0 +1,131 @@
+#
+# Parametres fichiers de sortie
+#
+# Noms des fichiers
+phys_out_filenames=      histmth histday histhf   histhf3h  histhf3hm histstn
+# Sortir ou non les fichiers
+phys_out_filekeys= _AUTO_
+# Niveaux de sorties
+phys_out_filelevels=     5       5       2        5         5         5
+### Type de fichier : global (n) ou stations (y)
+phys_out_filestations =  n       n       n        n         n         y
+### Frequences des sorties
+phys_out_filetimesteps = 1.mth,  1.day,  0.25day, 0.125day, 0.125day, 1800.s
+#
+#
+### variables niveaux pressions 100, 50, 10 hPa a 3h-inst - F.Lott
+flag_t100       = 1, 7, 7, 5, 10, 10
+flag_u100       = 1, 7, 7, 5, 10, 10
+flag_v100       = 1, 7, 7, 5, 10, 10
+flag_w100       = 1, 7, 7, 5, 10, 10
+flag_t50        = 1, 7, 7, 5, 10, 10
+flag_u50        = 1, 7, 7, 5, 10, 10
+flag_v50        = 1, 7, 7, 5, 10, 10
+flag_w50        = 1, 7, 7, 5, 10, 10
+flag_t10        = 1, 7, 7, 5, 10, 10
+flag_u10        = 1, 7, 7, 5, 10, 10
+flag_v10        = 1, 7, 7, 5, 10, 10
+flag_w10        = 1, 7, 7, 5, 10, 10
+#
+# more variables for level 5 : vitw and pres
+# Vertical wind
+flag_vitw         =  2, 3, 7, 6, 6, 6
+# Air pressure
+flag_pres         =  2, 3, 7, 6, 6, 6
+# w500 for histday
+flag_w500         =  1, 5, 3, 10, 10, 10
+# t700 for histday
+flag_t700         =  1, 5, 3, 10, 10, 10
+# Cloud fraction
+flag_rneb         =  2, 5, 10, 5, 10, 10
+# Aga sortie avec niveau 2
+flag_Aga          =  2, 10, 10, 10, 10, 10
+# niveaux maximum 5 mensuel pour variables CFMIP
+flag_rlu          =  5, 10, 10, 10, 10, 10
+flag_rsu          =  5, 10, 10, 10, 10, 10
+flag_rld          =  5, 10, 10, 10, 10, 10
+flag_rsd          =  5, 10, 10, 10, 10, 10
+flag_rlucs        =  5, 10, 10, 10, 10, 10
+flag_rsucs        =  5, 10, 10, 10, 10, 10
+flag_rldcs        =  5, 10, 10, 10, 10, 10
+flag_rsdcs        =  5, 10, 10, 10, 10, 10
+flag_tnt          =  5, 10, 10, 10, 10, 10
+flag_dtdyn        =  4, 10, 10, 10, 10, 10
+flag_dtphy        =  4, 10, 10, 10, 10, 10
+flag_dtlschr      =  5, 10, 10, 10, 10, 10
+flag_tntr         =  5, 10, 10, 10, 10, 10
+flag_tntc         =  5, 10, 10, 10, 10, 10
+flag_tntscpbl     =  5, 10, 10, 10, 10, 10
+flag_tnhus        =  5, 10, 10, 10, 10, 10
+flag_dqdyn        =  4, 10, 10, 10, 10, 10
+flag_tnhusc       =  5, 10, 10, 10, 10, 10
+flag_dqvdf        =  5, 10, 10, 10, 10, 10
+flag_tnhusscpbl   =  5, 10, 10, 10, 10, 10
+flag_dqphy        =  2, 10, 10, 10, 10, 10
+flag_evu          =  5, 10, 10, 10, 10, 10
+flag_kz           =  4, 10, 10, 10, 10, 10
+###
+# more variables for t tendency monthly
+###
+flag_dtvdf        =  5, 10, 10, 10, 10, 10
+flag_dteva        =  5, 10, 10, 10, 10, 10
+flag_dtcon        =  4, 10, 10, 10, 10, 10
+flag_dtajs        =  4, 10, 10, 10, 10, 10
+flag_dtlsc        =  4, 10, 10, 10, 10, 10
+flag_dtoro        =  4, 10, 10, 10, 10, 10
+flag_dtlif        =  4, 10, 10, 10, 10, 10
+flag_dthin        =  4, 10, 10, 10, 10, 10
+flag_dtec         =  4, 10, 10, 10, 10, 10
+### more variables for q tendency monthly
+flag_dqeva        =  5, 10, 10, 10, 10, 10
+flag_dqcon        =  4, 10, 10, 10, 10, 10
+flag_dqajs        =  4, 10, 10, 10, 10, 10
+flag_dqlsc        =  5, 10, 10, 10, 10, 10
+### nouvelle physique monthly
+flag_dtthe        =  4, 10, 10, 10, 10, 10
+flag_dtwak        =  4, 5, 10, 10, 10, 10
+flag_dqthe        =  4, 10, 10, 10, 10, 10
+flag_dqwak        =  4, 5, 10, 10, 10, 10
+flag_ftime_th     =  4, 10, 10, 5, 10, 10
+#
+# Parametres niveau de sorties differents fichiers
+#
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = _AUTO_
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp= _AUTO_
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP= _AUTO_
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP= _AUTO_
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP= _AUTO_
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP= _AUTO_
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/physiq.def_AP
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/physiq.def_AP	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/physiq.def_AP	(revision 5893)
@@ -0,0 +1,96 @@
+## $Id$
+#
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+#
+
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .999
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+##
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp)
+cld_lc_lsc = 3.43e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp)
+cld_lc_con = 3.43e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 1800.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 1800.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 0.5
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 0.5
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+
+### nsplit_phys (D=1) 
+nsplit_phys=1
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_LMDZ.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_LMDZ.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_LMDZ.xml	(revision 5893)
@@ -0,0 +1,506 @@
+<context id="LMDZ">
+<field_definition>
+<!-- for variables which realm equals one of _atmos-->
+   <field id="CMIP6_aerasymbnd"    field_ref="dummy_not_provided"           /> <!-- P1 (1) band_aerosol_asymmetry_parameter : Aerosol level asymmetry parameter for each band -->
+   <field id="CMIP6_aeroptbnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) atmosphere_absorption_optical_thickness_due_to_ambient_aerosol_particles : Aerosol level extinction optical depth for each band -->
+   <field id="CMIP6_aerssabnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) single_scattering_albedo_in_air_due_to_ambient_aerosol_particles : Aerosol level single-scattering albedo for each band -->
+   <field id="CMIP6_albdiffbnd"    field_ref="dummy_not_provided"           /> <!-- P1 (1) band_diffuse_albedo : Diffuse surface albedo for each band -->
+   <field id="CMIP6_albdirbnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) band_direct_albedo : Direct surface albedo for each band -->
+   <field id="CMIP6_albisccp"      field_ref="dummy_not_provided"                     /> <!-- P1 (1) cloud_albedo : time-means are weighted by the ISCCP Total Cloud Fraction - see  http://cfmip.metoffice.com/COSP.html -->
+   <field id="CMIP6_aod550volso4"  field_ref="dummy_not_provided"                  /> <!-- P1 (1e-09) aerosol_optical_depth_due_to_stratospheric_volcanic_aerosols : aerosol optical thickness at 550 nm due to stratospheric volcanic aerosols  -->
+   <field id="CMIP6_areacella"     field_ref="aire"                         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report atmospheric variables and any other variable using that grid (e.g., soil moisture content). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_ccb"           field_ref="pbase"                        /> <!-- P1 (Pa) air_pressure_at_convective_cloud_base : Air Pressure at Convective Cloud Base -->
+   <field id="CMIP6_ccldncl"       field_ref="dummy_XY"                     /> <!-- P1 (m-3) number_concentration_of_convective_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Convective Cloud Tops -->
+   <field id="CMIP6_cct"           field_ref="ptop"                         /> <!-- P1 (Pa) air_pressure_at_convective_cloud_top : Air Pressure at Convective Cloud Top -->
+   <field id="CMIP6_cfadDbze94"    field_ref="dummy_not_provided"                   /> <!-- P1 (1) histogram_of_equivalent_reflectivity_factor_over_height_above_reference_ellipsoid : CloudSat Radar Reflectivity CFAD -->
+   <field id="CMIP6_cfadLidarsr532" field_ref="dummy_not_provided"             /> <!-- P1 (1) histogram_of_backscattering_ratio_over_height_above_reference_ellipsoid : CALIPSO Scattering Ratio -->
+   <field id="CMIP6_cfc113global"  field_ref="dummy_not_provided"           /> <!-- P1 (1e-12) mole_fraction_of_cfc113_in_air : Global Mean Mole Fraction of CFC113 -->
+   <field id="CMIP6_cfc11global"   field_ref="dummy_not_provided"                    /> <!-- P1 (1e-12) mole_fraction_of_cfc11_in_air : Global Mean Mole Fraction of CFC11 -->
+   <field id="CMIP6_cfc12global"   field_ref="dummy_not_provided"                    /> <!-- P1 (1e-12) mole_fraction_of_cfc12_in_air : Global Mean Mole Fraction of CFC12 -->
+   <field id="CMIP6_ch4"           field_ref="dummy_not_provided"           /> <!-- P1 (mol mol-1) mole_fraction_of_methane_in_air : Mole Fraction of CH4 -->
+   <field id="CMIP6_ch4global"     field_ref="dummy_not_provided"                      /> <!-- P1 (1e-09) mole_fraction_of_methane_in_air : Global Mean Mole Fraction of CH4 -->
+   <field id="CMIP6_ci"            field_ref="ftime_con"                    /> <!-- P1 (1) convection_time_fraction : Fraction of time that convection occurs in the grid cell. -->
+   <field id="CMIP6_clcalipso2"    field_ref="clcalipso2"                   /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Cloud Fraction Undetected by CloudSat --> 
+   <field id="CMIP6_clcalipso"     field_ref="dummy_not_provided"                   /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Cloud Area Fraction --> 
+   <field id="CMIP6_clcalipsoice"  field_ref="clcalipsoice"                 /> <!-- P1 (%) ice_cloud_area_fraction_in_atmosphere_layer : CALIPSO Ice Cloud Fraction -->
+   <field id="CMIP6_clcalipsoliq"  field_ref="clcalipsoliq"                 /> <!-- P1 (%) liquid_cloud_area_fraction_in_atmosphere_layer : CALIPSO Liquid Cloud Fraction -->
+   <field id="CMIP6_clc"           field_ref="dummy_not_provided"> rnebcon*100. </field>  <!-- P1 (%) convective_cloud_area_fraction_in_atmosphere_layer : Convective Cloud Area Fraction -->
+   <field id="CMIP6_cldicemxrat"   field_ref="dummy_not_provided"                  /> <!-- P2 (1) cloud_ice_mixing_ratio : Cloud Ice Mixing Ratio -->
+   <field id="CMIP6_cldnci"        field_ref="dummy_XY"                     /> <!-- P1 (m-3) number_concentration_of_ice_crystals_in_air_at_ice_cloud_top : Ice Crystal Number Concentration of Cloud Tops -->
+   <field id="CMIP6_cldncl"        field_ref="cldncl" expr=" @cldncl / @lcc_limit" > cldncl / lcc_limit </field> <!-- P1 (m-3) number_concentration_of_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Cloud Tops -->
+   <field id="CMIP6_cldnvi"        field_ref="dummy_not_provided"           /> <!-- P1 (m-2) atmosphere_number_content_of_cloud_droplets : Column Integrated Cloud Droplet Number -->
+   <field id="CMIP6_cldwatmxrat"   field_ref="dummy_not_provided"                  /> <!-- P2 (1) cloud_liquid_water_mixing_ratio : Cloud Water Mixing Ratio -->
+   <field id="CMIP6_cl"            field_ref="dummy_not_provided"> rneb*100.      </field>   <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : Cloud Area Fraction in Atmosphere Layer -->
+   <field id="CMIP6_clhcalipso"    field_ref="dummy_not_provided"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage High Level Cloud -->
+   <field id="CMIP6_clic"          field_ref="dummy_not_provided"                     /> <!-- P2 (1) mass_fraction_of_convective_cloud_ice_in_air : Calculated as the mass of convective cloud ice  in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_cli"           field_ref="iwcon"                        /> <!-- P1 (kg kg-1) mass_fraction_of_cloud_ice_in_air : Includes both large-scale and convective cloud. This is the mass of cloud ice in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_climodis"      field_ref="climodis"                     /> <!-- P1 (%) ice_cloud_area_fraction : MODIS Ice Cloud Fraction -->
+   <field id="CMIP6_clisccp"       field_ref="dummy_not_provided"                     /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : ISCCP Percentage Cloud Area -->
+   <field id="CMIP6_clis"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) mass_fraction_of_stratiform_cloud_ice_in_air : Calculated as the mass of stratiform cloud ice  in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clivic"        field_ref="dummy_XY"                     /> <!-- P1 (kg m-2) atmosphere_convective_cloud_ice_content : Convective Ice Water Path  -->
+   <field id="CMIP6_clivi"         field_ref="iwp"                          /> <!-- P1 (kg m-2) atmosphere_cloud_ice_content : mass of ice water in the column divided by the area of the column (not just the area of the cloudy portion of the column). Includes precipitating frozen hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. -->
+   <field id="CMIP6_cllcalipso"    field_ref="dummy_not_provided"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage Low Level Cloud -->
+   <field id="CMIP6_clmcalipso"    field_ref="dummy_not_provided"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage Mid Level Cloud -->
+   <field id="CMIP6_clmisr"        field_ref="dummy_not_provided"                       /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MISR cloud area fraction -->
+   <field id="CMIP6_cls"           field_ref="dummy_XYA"                    /> <!-- P1 (%) stratiform_cloud_area_fraction_in_atmosphere_layer : Stratiform Cloud Area Fraction -->
+   <field id="CMIP6_cltcalipso"    field_ref="dummy_not_provided"                  /> <!-- P1 (%) cloud_area_fraction :  CALIPSO Total Cloud Fraction -->
+   <field id="CMIP6_cltc"          field_ref="dummy_XY"         /> <!-- P1 (%) convective_cloud_area_fraction : For the whole atmospheric column, as seen from the surface or the top of the atmosphere. Includes only convective cloud. -->
+   <field id="CMIP6_clt"           field_ref="dummy_not_provided"> cldt*100.        </field> <!-- P1 (%) cloud_area_fraction : for the whole atmospheric column, as seen from the surface or the top of the atmosphere. Includes both large-scale and convective cloud. -->
+   <field id="CMIP6_cltisccp"      field_ref="dummy_not_provided"                     /> <!-- P1 (%) cloud_area_fraction : ISCCP Total Cloud Fraction -->
+   <field id="CMIP6_clt_land"      field_ref="dummy_not_provided"> cldt*100.        </field> <!-- P1 (%) cloud_area_fraction : Total cloud fraction -->
+   <field id="CMIP6_cltmodis"      field_ref="cltmodis"                     /> <!-- P1 (%) cloud_area_fraction : MODIS Total Cloud  Fraction -->
+   <field id="CMIP6_clwc"          field_ref="lcc3dcon"                     /> <!-- P2 (1) mass_fraction_of_convective_cloud_liquid_water_in_air : Calculated as the mass of convective cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clw"           field_ref="lwcon"                        /> <!-- P1 (kg kg-1) mass_fraction_of_cloud_liquid_water_in_air : Includes both large-scale and convective cloud. Calculate as the mass of cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cells. Precipitating hydrometeors are included ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwmodis"      field_ref="clwmodis"                     /> <!-- P1 (%) liquid_water_cloud_area_fraction : MODIS Liquid Cloud Fraction -->
+   <field id="CMIP6_clws"          field_ref="lcc3dstra"                    /> <!-- P2 (1) mass_fraction_of_stratiform_cloud_liquid_water_in_air : Calculated as the mass of stratiform cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwvic"        field_ref="dummy_XY"                     /> <!-- P1 (kg m-2) atmosphere_convective_cloud_condensed_water_content : Convective Condensed Water Path -->
+   <field id="CMIP6_clwvi"         field_ref="lwp"                          /> <!-- P1 (kg m-2) atmosphere_cloud_condensed_water_content : mass of condensed (liquid + ice) water in the column divided by the area of the column (not just the area of the cloudy portion of the column). Includes precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. -->
+   <field id="CMIP6_co23D"         field_ref="dummy_not_provided"           /> <!-- P2 (kg kg-1) CO2_3D_tracer : requested for all Emissions-driven runs -->
+   <field id="CMIP6_co2"           field_ref="dummy_not_provided"           /> <!-- P1 (mol mol-1) mole_fraction_of_carbon_dioxide_in_air :  Mole Fraction of CO2 -->
+   <field id="CMIP6_co2mass"       field_ref="dummy_not_provided"> co2_ppm*1e-6*44.011/28.97*mass_sum </field> <!-- P1 (kg) atmosphere_mass_of_carbon_dioxide : Total Atmospheric Mass of CO2 -->
+   <field id="CMIP6_co2s"          field_ref="dummy_not_provided"           /> <!-- P2 (1e-06) mole_fraction_of_carbon_dioxide_in_air : Atmosphere CO2 -->
+   <field id="CMIP6_columnmassflux" field_ref="dummy_XY"                    /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : Column integrated mass flux -->
+   <field id="CMIP6_conccmcn"      field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_coarse_mode_ambient_aerosol_in_air : Number Concentration Coarse Mode Aerosol -->
+   <field id="CMIP6_conccn"        field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_ambient_aerosol_in_air : Aerosol Number Concentration -->
+   <field id="CMIP6_concdust"      field_ref="concdust"                     /> <!-- P1 (kg m-3) mass_concentration_of_dust_dry_aerosol_in_air : Concentration of Dust -->
+   <field id="CMIP6_concnmcn"      field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_nucleation_mode_ambient_aerosol_in_air : Number Concentration of Nucleation Mode Aerosol -->
+   <field id="CMIP6_demc"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) convective_cloud_longwave_emissivity : This is the in-cloud emissivity obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_dems"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) stratiform_cloud_longwave_emissivity : This is the in-cloud emissivity obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_diabdrag"      field_ref="dummy_XYA"                    /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_numerical_artefacts : Tendency of Eastward Wind from Numerical Artefacts -->
+   <field id="CMIP6_dmc"           field_ref="upwd"                         /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_deep_convective_mass_flux : The net mass flux  represents the difference between the updraft and downdraft components.   This is calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_dtauc"         field_ref="dummy_not_provided"           /> <!-- P2 (1) atmosphere_optical_thickness_due_to_convective_cloud : This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell -->
+   <field id="CMIP6_dtaus"         field_ref="dummy_not_provided"           /> <!-- P2 (1) atmosphere_optical_thickness_due_to_stratiform_cloud : This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_edt"           field_ref="kz"                           /> <!-- P1 (m2 s-1) atmosphere_heat_diffusivity : Eddy Diffusivity Coefficient for Temperature Variable -->
+   <field id="CMIP6_epfy"          field_ref="dummy_XYA"                    /> <!-- P1 (m3 s-2) northward_eliassen_palm_flux_in_air : Northward Component of the Eliassen-Palm Flux -->
+   <field id="CMIP6_epfz"          field_ref="dummy_XYA"                    /> <!-- P1 (m3 s-2) upward_eliassen_palm_flux_in_air : zonal mean; hence YZT -->
+   <field id="CMIP6_evspsbl"       field_ref="evap"                         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : Evaporation at surface; flux of water into the atmosphere due to conversion of both liquid and solid phases to vapor (from underlying surface and vegetation) -->
+   <field id="CMIP6_evu"           field_ref="evu"                          /> <!-- P1 (m2 s-1) atmosphere_momentum_diffusivity : Eddy Viscosity Coefficients for Momentum -->
+   <field id="CMIP6_fco2antt"      field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_anthropogenic_emission : This is requested only for the emission-driven coupled carbon climate model runs.  Does not include natural fire sources but, includes all anthropogenic sources, including fossil fuel use, cement production, agricultural burning, and sources associated with anthropogenic land use change excluding forest regrowth. -->
+   <field id="CMIP6_fco2fos"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fossil_fuel_combustion : This is the prescribed anthropogenic CO2 flux from fossil fuel use, including cement production, and flaring (but not from land-use changes, agricultural burning, forest regrowth, etc.) -->
+   <field id="CMIP6_fco2nat"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_natural_sources : This is what the atmosphere sees (on its own grid).  This field should be equivalent to the combined natural fluxes of carbon (requested in the L_mon and O_mon tables) that account for natural exchanges between the atmosphere and land or ocean reservoirs (i.e., "net ecosystem biospheric productivity", for land, and "air to sea CO2 flux", for ocean.) -->
+   <field id="CMIP6_grpllsprof"    field_ref="dummy_not_provided"           /> <!-- P2 (kg m-2 s-1) large_scale_graupel_flux : Stratiform Graupel Flux  -->
+   <field id="CMIP6_grplmxrat"     field_ref="dummy_not_provided"           /> <!-- P2 (1) mass_fraction_of_graupel_in_air : Graupel Mixing Ratio -->
+   <field id="CMIP6_h2o"           field_ref="dummy_not_provided"> ovap+ocond       </field> <!-- P2 (1) mass_fraction_of_water_in_air : includes all phases of water -->
+   <field id="CMIP6_H2p"           field_ref="dummy_not_provided"           /> <!-- P1 ()  : 2H in total precipitation -->
+   <field id="CMIP6_H2s"           field_ref="dummy_not_provided"           /> <!-- P1 ()  : 2H in solid precipitation -->
+   <field id="CMIP6_H2wv"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : H2 in water vapor -->
+   <field id="CMIP6_hcfc22global"  field_ref="dummy_not_provided"           /> <!-- P1 (1e-12) mole_fraction_of_hcfc22_in_air : Global Mean Mole Fraction of HCFC22 -->
+   <field id="CMIP6_hfdsl"         field_ref="dummy_not_provided"> bils*fract_ter   </field> <!-- P1 (W m-2) surface_downward_heat_flux_in_air : Ground heat flux -->
+   <field id="CMIP6_hfdsnb"        field_ref="dummy_not_provided"           /> <!-- P1 (W m-2)  : Downward heat flux at snow botton -->
+   <field id="CMIP6_hfls"          field_ref="dummy_not_provided"> flat*(-1.)       </field>  <!-- P1 (W m-2) surface_upward_latent_heat_flux : Surface Upward Latent Heat Flux -->
+   <field id="CMIP6_hfls_ist"      field_ref="lat_lic"                      /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : Surface Upward Latent Heat Flux -->
+   <field id="CMIP6_hfls_land"     field_ref="lat_ter"                      /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : Latent heat flux -->
+   <field id="CMIP6_hfmlt"         field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) surface_snow_and_ice_melt_heat_flux : Energy of fusion -->
+   <field id="CMIP6_hfrs"          field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) temperature_flux_due_to_rainfall_expressed_as_heat_flux_onto_snow_and_ice : Heat transferred to snowpack by rainfall -->
+   <field id="CMIP6_hfsbl"         field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) surface_snow_and_ice_sublimation_heat_flux : Energy of sublimation -->
+   <field id="CMIP6_hfss"          field_ref="dummy_not_provided"> sens*(-1.)       </field> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Surface Upward Sensible Heat Flux -->
+   <field id="CMIP6_hfss_ist"      field_ref="sens_lic"                     /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Surface Upward Sensible Heat Flux -->
+   <field id="CMIP6_hfss_land"     field_ref="sens_ter"                     /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Sensible heat flux -->
+   <field id="CMIP6_hur"           field_ref="dummy_not_provided"> rhum*100.        </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->
+   <field id="CMIP6_hurs"          field_ref="rh2m"             /> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->
+   <field id="CMIP6_hursmax"       field_ref="rh2m_max" freq_op="1d" > @rh2m_max </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->   
+   <field id="CMIP6_hursminCrop"   field_ref="dummy_not_provided"         /> <!-- P1 (%) relative_humidity : Daily Minimum Near-Surface Relative Humidity over Crop Tile -->
+   <field id="CMIP6_hursmin"       field_ref="rh2m_min" freq_op="1d" > @rh2m_min </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->  
+   <field id="CMIP6_hus"           field_ref="ovap"             /> <!-- P1 (1.0) specific_humidity : Specific Humidity -->
+   <field id="CMIP6_huss"          field_ref="q2m"              /> <!-- P1 (1.0) specific_humidity : This is sampled synoptically. -->
+   <field id="CMIP6_iareafl"       field_ref="fract_sic"         >fract_sic*aire </field> <!-- P3 (m2) floating_ice_shelf_area : Antarctica -->
+   <field id="CMIP6_iareagr"       field_ref="fract_lic"         >fract_lic*aire </field> <!-- P3 (m2) grounded_ice_sheet_area : Greenland -->
+   <field id="CMIP6_intuadse"      field_ref="ue"               /> <!-- P1 (1.e6 J m-1 s-1) vertical_integral_eastward_wind_by_dry_static_energy : Vertically integrated Eastward dry transport (cp.T +zg).u (Mass_weighted_vertical integral of the product of northward wind by dry static_energy per mass unit) -->
+   <field id="CMIP6_intuaw"        field_ref="dummy_not_provided"             /> <!-- P1 (kg m-1 s-1) vertical_integral_eastward_wind_by_total_water : Vertically integrated Eastward moisture transport (Mass_weighted_vertical integral of the product of eastward wind by total water mass per unit mass) -->
+   <field id="CMIP6_intvadse"      field_ref="ve"               /> <!-- P1 (1.e6 J m-1 s-1) vertical_integral_northward_wind_by_dry_static_energy : Vertically integrated Northward dry transport (cp.T +zg).v (Mass_weighted_vertical integral of the product of northward wind by dry static_energy per mass unit) -->
+   <field id="CMIP6_intvaw"        field_ref="dummy_not_provided"             /> <!-- P1 (kg m-1 s-1) vertical_integral_northward_wind_by_total_water : Vertically integrated Northward moisture transport (Mass_weighted_vertical integral of the product of northward wind by total water mass per unit mass) -->
+   <field id="CMIP6_jo2"           field_ref="dummy_not_provided"        /> <!-- P1 (s-1) photolysis_rate_of_molecular_oxygen : zonal mean; hence YZT -->
+   <field id="CMIP6_jo3"           field_ref="dummy_not_provided"        /> <!-- P1 (s-1) photolysis_rate_of_ozone : zonal mean; hence YZT --> 
+   <field id="CMIP6_jpdftaureicemodis" field_ref="dummy_not_provided"              /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MODIS Optical Thickness-Particle Size joint  distribution, ice -->
+   <field id="CMIP6_jpdftaureliqmodis" field_ref="dummy_not_provided"              /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MODIS Optical Thickness-Particle Size joint  distribution, liquid -->
+   <field id="CMIP6_latitude"      field_ref="dummy_not_provided"        /> <!-- P1 (degrees_north) latitude : Latitude -->
+   <field id="CMIP6_lim"           field_ref="dummy_not_provided"        /> <!-- P2 (kg) land_ice_mass : Greenland -->
+   <field id="CMIP6_limnsw"        field_ref="dummy_not_provided"        /> <!-- P2 (kg) land_ice_mass_not_displacing_sea_water : Greenland -->
+   <field id="CMIP6_loadbc"        field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_black_carbon_dry_aerosol : Load of Black Carbon Aerosol -->
+   <field id="CMIP6_loaddust"      field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_dust_dry_aerosol : Load of Dust -->
+   <field id="CMIP6_loadnh4"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_ammonium_dry_aerosol : Load of NH4 -->
+   <field id="CMIP6_loadno3"       field_ref="dummy_not_provided"          /> <!-- P1 (kg m-2) atmosphere_mass_content_of_nitrate_dry_aerosol : Load of NO3 -->
+   <field id="CMIP6_loadoa"        field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Organic Matter -->
+   <field id="CMIP6_loadpoa"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Primary Organic Matter -->
+   <field id="CMIP6_loadso4"       field_ref="dummy_not_provided"          /> <!-- P1 (kg m-2) atmosphere_mass_content_of_sulfate_dry_aerosol : Load of SO4 -->
+   <field id="CMIP6_loadsoa"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Secondary Organic Matter -->
+   <field id="CMIP6_loadss"        field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_seasalt_dry_aerosol : Load of Seasalt -->
+   <field id="CMIP6_longitude"     field_ref="dummy_not_provided"         /> <!-- P1 (degrees_east) longitude : Longitude -->
+   <field id="CMIP6_lwsffluxaero"  field_ref="toplwad"         /> <!-- P2 (W m-2) longwave__flux__due_to_volcanic_aerosols_at_the_surface : downwelling longwave  flux  due to volcanic aerosols at the surface to be diagnosed through double radiation call -->
+   <field id="CMIP6_lwsrfasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_instantaneous_longwave_forcing_due_to_dust : All-sky Surface Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwsrfcsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_instantaneous_longwave_forcing_due_to_dust_in_clearsky : Clear-sky Surface Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwtoaasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing : all sky lw-rf dust at toa -->
+   <field id="CMIP6_lwtoacsaer"    field_ref="toplwad0"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing : Clear-Sky LW-RF Aerosols at TOA -->
+   <field id="CMIP6_lwtoacsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing_due_to_dust_in_clearsky : Clear-sky TOA Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwtoafluxaerocs" field_ref="toplwad0"       /> <!-- P1 (W m-2) longwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling longwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call -->
+   <field id="CMIP6_mcd"           field_ref="dnwd"              > (dnwd-dnwd0) &gt; 0 ? (dnwd-dnwd0) : 0 </field> <!-- P2 (kg m-2 s-1) atmosphere_downdraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_mc"            field_ref="mc"               /> <!-- P1 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : The net mass flux should represent the difference between the updraft and downdraft components.  The flux is computed as the mass divided by the area of the grid cell. -->
+   <field id="CMIP6_mcu"           field_ref="upwd"             /> <!-- P1 (kg m-2 s-1) atmosphere_updraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_md"            field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Wet diameter mode coarse insoluble --> 
+   <field id="CMIP6_mrroLi"        field_ref="dummy_not_provided"                    /> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Land Ice Runoff Flux -->
+   <field id="CMIP6_n2o"           field_ref="dummy_not_provided"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrous_oxide_in_air : Mole Fraction of N2O -->
+   <field id="CMIP6_n2oglobal"     field_ref="dummy_not_provided"                   /> <!-- P1 (1e-09) mole_fraction_of_nitrous_oxide_in_air : Global Mean Mole Fraction of N2O -->
+   <field id="CMIP6_O17p"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 17O in total precipitation -->
+   <field id="CMIP6_O17s"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 17O in solid precipitation -->
+   <field id="CMIP6_O17wv"         field_ref="dummy_not_provided"           /> <!-- P1 ()  : O17 in water vapor -->
+   <field id="CMIP6_O18p"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 18O in total precipitation -->
+   <field id="CMIP6_O18s"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 18O in solid precipitation -->
+   <field id="CMIP6_O18wv"         field_ref="dummy_not_provided"           /> <!-- P1 ()  : O18 in water vapor -->
+   <field id="CMIP6_o3"            field_ref="ozone"                     /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Mole Fraction of O3 -->
+   <field id="CMIP6_od443dust"     field_ref="dummy_not_provided"        /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Optical thickness at 443 nm Dust -->
+   <field id="CMIP6_od550aerso"    field_ref="dummy_not_provided"               /> <!-- P1 (1) strat_aerosol_optical_depth : Stratospheric Optical depth at 550 nm (all aerosols) 2D-field (here we limit the computation of OD to the stratosphere only) -->
+   <field id="CMIP6_od550so4so"    field_ref="dummy_not_provided"        /> <!-- P1 (1)  : Stratospheric Optical depth at 550 nm (sulphate only) 2D-field (here we limit the computation of OD to the stratosphere only) --> 
+   <field id="CMIP6_od865dust"     field_ref="dummy_not_provided"        /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Optical thickness at 865 nm Dust -->
+   <field id="CMIP6_parasolRefl" field_ref="dummy_not_provided"                /> <!-- P1 (1) toa_bidirectional_reflectance : PARASOL Reflectance -->
+   <field id="CMIP6_pctisccp"      field_ref="dummy_not_provided"                  /> <!-- P1 (Pa) air_pressure_at_cloud_top : time-means weighted by the ISCCP Total Cloud Fraction - see  http://cfmip.metoffice.com/COSP.html -->
+   <field id="CMIP6_pfull"         field_ref="pres"                      /> <!-- P1 (Pa) air_pressure : Pressure on Model Levels -->
+   <field id="CMIP6_phalf"         field_ref="paprs"                     /> <!-- P1 (Pa) air_pressure : Pressure on Model Half-Levels -->
+   <field id="CMIP6_prc"           field_ref="pluc"                      /> <!-- P1 (kg m-2 s-1) convective_precipitation_flux : at surface; includes both liquid and solid phases. -->
+   <field id="CMIP6_prcprof"       field_ref="pr_con_l"                  /> <!-- P2 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall Flux -->
+   <field id="CMIP6_prCrop"        field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) precipitation_flux : Precipitation over Crop Tile -->
+   <field id="CMIP6_prcsh"         field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) shallow_convective_precipitation_flux : Shallow convection precipitation flux -->
+   <field id="CMIP6_pr"            field_ref="precip"                    /> <!-- P1 (kg m-2 s-1) precipitation_flux : at surface; includes both liquid and solid phases from all types of clouds (both large-scale and convective) -->
+   <field id="CMIP6_prhmax"        field_ref="dummy_not_provided" freq_op="1h" >   @prhmax   </field> <!-- P1 (kg m-2 s-1) precipitation_flux : Maximum Hourly Precipitation Rate -->
+   <field id="CMIP6_prlsns"        field_ref="pr_lsc_i"                  /> <!-- P2 (kg m-2 s-1) large_scale_snowfall_flux : large-scale precipitation of all forms of water in the solid phase. -->
+   <field id="CMIP6_prlsprof"      field_ref="pr_lsc_l"                  /> <!-- P2 (kg m-2 s-1) large_scale_rainfall_flux : Stratiform Rainfall Flux -->
+   <field id="CMIP6_prra"          field_ref="dummy_not_provided"                 /> <!-- P1 (kg m-2 s-1) rainfall_flux : Rainfall rate -->
+   <field id="CMIP6_prra_ifs"      field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : computed as the total mass of liquid water falling as liquid rain  into the ice-free portion of the ocean divided by the area of the ocean portion of the grid cell. -->
+   <field id="CMIP6_prra_ist"      field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : over Land Ice//quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prra_land"     field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) rainfall_flux : rainfall_flux -->
+   <field id="CMIP6_prrc"          field_ref="dummy_not_provided"                  /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall rate -->
+   <field id="CMIP6_prrc_land"     field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : convective_rainfall_flux -->
+   <field id="CMIP6_prrsn"         field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_rainfall_onto_snow : mass_fraction_of_rainfall_onto_snow -->
+   <field id="CMIP6_prsnc"         field_ref="pr_con_i"                 /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : Convective Snowfall rate -->
+   <field id="CMIP6_prsnc_land"    field_ref="pr_con_i"        /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : convective_snowfall_flux -->
+   <field id="CMIP6_prsn"          field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : at surface; includes precipitation of all forms of water in the solid phase -->
+   <field id="CMIP6_prsn_ifs"      field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : computed as the total mass per unit time of solid-phase precipitation falling into the ice-free portion of the ocean divided by the area of the ocean portion of the grid cell.   (Snowfall flux includes all types of solid-phase precipitation.) -->
+   <field id="CMIP6_prsn_ist"      field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prsnsn"        field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_snowfall_onto_snow : mass_fraction_of_snowfall_onto_snow -->
+   <field id="CMIP6_prw"           field_ref="prw"                      /> <!-- P1 (kg m-2) atmosphere_water_vapor_content : Water Vapor Path -->
+   <field id="CMIP6_ps"            field_ref="psol"                     /> <!-- P1 (Pa) surface_air_pressure : not, in general, the same as mean sea-level pressure -->
+   <field id="CMIP6_psitem"        field_ref="dummy_XYA"                /> <!-- P1 (kg s^-1) meridional_streamfunction_transformed_eulerian_mean : zonal mean; hence YZT -->
+   <field id="CMIP6_psl"           field_ref="slp"                      /> <!-- P1 (Pa) air_pressure_at_sea_level : not, in general, the same as surface pressure -->
+   <field id="CMIP6_rainmxrat"     field_ref="dummy_not_provided"       /> <!-- P2 (1) mass_fraction_of_rain_in_air : rain_mixing_ratio -->
+   <field id="CMIP6_reffcclwtop"   field_ref="dummy_not_provided"       /> <!-- P1 (m) effective_radius_of_convective_cloud_liquid_water_particle_at_liquid_water_cloud_top : Cloud-Top Effective Droplet Radius In Convective Cloud -->
+   <field id="CMIP6_reffclic"      field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_convective_cloud_ice_particle : Hydrometeor Effective Radius of Convective Cloud Ice -->
+   <field id="CMIP6_reffclis"      field_ref="ref_ice"                  /> <!-- P2 (m) effective_radius_of_stratiform_cloud_ice_particle : Hydrometeor Effective Radius of Stratiform Cloud Ice -->
+   <field id="CMIP6_reffclwc"      field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_convective_cloud_liquid_water_particle : Hydrometeor Effective Radius of Convective Cloud Liquid Water -->
+   <field id="CMIP6_reffclws"      field_ref="reffclws" expr="@reffclws / @lcc3dstra" > reffclws / lcc3dstra </field> <!-- P2 (m) effective_radius_of_stratiform_cloud_liquid_water_particle : Hydrometeor Effective Radius of Stratiform Cloud Liquid Water -->
+   <field id="CMIP6_reffgrpls"     field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_stratiform_cloud_graupel_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffrainc"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_convective_cloud_rain_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffrains"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_stratiform_cloud_rain_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffsclwtop"   field_ref="reffclwtop" expr="@reffclwtop / @lcc" > reffclwtop / lcc </field> <!-- P1 (m) effective_radius_of_stratiform_cloud_liquid_water_particle_at_liquid_water_cloud_top : Cloud-Top Effective Droplet Radius In Stratiform Cloud -->
+   <field id="CMIP6_reffsnowc"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_convective_cloud_snow_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffsnows"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_stratiform_cloud_snow_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_rld4co2"       field_ref="dummy_not_provided"          /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air : Downwelling Longwave Radiation 4XCO2 Atmosphere --> 
+   <field id="CMIP6_rldcs4co2"     field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rldcs"         field_ref="rldcs"            /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Longwave Radiation -->
+   <field id="CMIP6_rld"           field_ref="dummy_not_provided"> rld*(-1.)   </field> <!-- P1 (W m-2) downwelling_longwave_flux_in_air : Downwelling Longwave Radiation --> 
+   <field id="CMIP6_rldscs"        field_ref="LWdnSFCclr"       /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rlds"          field_ref="LWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rlds_ist"      field_ref="LWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rls"           field_ref="soll"             /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : Net Longwave Surface Radiation -->
+   <field id="CMIP6_rls_land"      field_ref="flw_ter"             /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : Net longwave radiation -->
+   <field id="CMIP6_rlu4co2"       field_ref="dummy_not_provided"          /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air : Upwelling Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlucs4co2"     field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlucs"         field_ref="rlucs"            /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air_assuming_clear_sky : Includes also the fluxes at the surface and TOA. -->
+   <field id="CMIP6_rlu"           field_ref="rlu"              /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rlus"          field_ref="LWupSFC"          /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave Radiation -->
+   <field id="CMIP6_rlus_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave Radiation -->
+   <field id="CMIP6_rlut4co2"      field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : TOA Outgoing Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlutcs4co2"    field_ref="dummy_not_provided"       /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlutcs"        field_ref="topl0"            /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Longwave Radiation -->
+   <field id="CMIP6_rlut"          field_ref="topl"             /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : TOA Outgoing Longwave Radiation -->
+   <field id="CMIP6_rsd4co2"       field_ref="dummy_not_provided"          /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air : Downwelling Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsdcs4co2"     field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsdcsbnd"      field_ref="dummy_not_provided"        />   <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Radiation at each level for each band -->
+   <field id="CMIP6_rsdcs"         field_ref="rsdcs"            /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Raiation -->
+   <field id="CMIP6_rsd"           field_ref="rsd"              /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rsdscsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Downwelling Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsdscsdiff"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_diffuse_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Diffuse Downwelling Clear Sky Shortwave Radiation --> 
+   <field id="CMIP6_rsdscs"        field_ref="SWdnSFCclr"       /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Downwelling Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsdsdiff"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_diffuse_downwelling_shortwave_flux_in_air : Surface Diffuse Downwelling Shortwave Radiation -->
+   <field id="CMIP6_rsds"          field_ref="SWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : This is the 3-hour mean flux. -->
+   <field id="CMIP6_rsds_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : Surface Downwelling Shortwave Radiation -->
+   <field id="CMIP6_rsdt"          field_ref="SWdnTOA"          /> <!-- P1 (W m-2) toa_incoming_shortwave_flux : TOA Incident Shortwave Radiation -->
+   <field id="CMIP6_rss"           field_ref="sols"             /> <!-- P1 (W m-2) surface_net_downward_shortwave_flux : Net Shortwave Surface Radiation -->
+   <field id="CMIP6_rss_land"      field_ref="fsw_ter"             /> <!-- P1 (W m-2) surface_net_downward_shortwave_flux : Net shortwave radiation -->
+   <field id="CMIP6_rsu4co2"       field_ref="dummy_not_provided"          /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air : Upwelling Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsucs4co2"     field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsucsbnd"      field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Shortwave Radiation at each level for each band -->
+   <field id="CMIP6_rsucs"         field_ref="rsucs"            />  <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Includes also the fluxes at the surface and TOA. -->
+   <field id="CMIP6_rsu"           field_ref="rsu"              /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rsuscsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Upwelling Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsuscs"        field_ref="SWupSFCclr"       /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Upwelling Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsus"          field_ref="SWupSFC"          /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave Radiation --> 
+   <field id="CMIP6_rsus_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave Radiation -->
+   <field id="CMIP6_rsut4co2"      field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : TOA Outgoing Shortwave Radiation in 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsutcs4co2"    field_ref="dummy_not_provided"       /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsutcsafbnd"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) band_toa_outgoing_shortwave_flux_assuming_clean_clear_sky : TOA Outgoing Clear-Sky, Aerosol-Free Shortwave Radiation in Bands -->
+   <field id="CMIP6_rsutcsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsutcs"        field_ref="SWupTOAclr"       /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsut"          field_ref="SWupTOA"          /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : TOA Outgoing Shortwave Radiation -->
+   <field id="CMIP6_rtmt"          field_ref="nettop"           /> <!-- P1 (W m-2) net_downward_radiative_flux_at_top_of_atmosphere_model : i.e., at the top of that portion of the atmosphere where dynamics are explicitly treated by the model. This is reported only if it differs from the net downward radiative flux at the top of the atmosphere. -->
+   <field id="CMIP6_rv"            field_ref="dummy_XY"         /> <!-- P1 (s-1) atmosphere_relative_vorticity : Relative Vorticity at 850 hPa -->
+   <field id="CMIP6_sblnosn"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) sublimation_amount_assuming_no_snow : sublimation_amount_assuming_no_snow -->
+   <field id="CMIP6_sci"           field_ref="dummy_not_provided"         /> <!-- P1 (1.0) shallow_convection_time_fraction : Fraction of time that shallow convection occurs in the grid cell. -->
+   <field id="CMIP6_scldncl"       field_ref="dummy_XY"         /> <!-- P1 (m-3) number_concentration_of_stratiform_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Stratiform Cloud Tops -->
+   <field id="CMIP6_sconcdust"     field_ref="dummy_not_provided"        /> <!-- P1 (kg m-3) mass_concentration_of_dust_dry_aerosol_in_air : Surface Concentration of Dust -->
+   <field id="CMIP6_sconcso4"      field_ref="dummy_not_provided"         /> <!-- P1 (kg m-3) mass_concentration_of_sulfate_dry_aerosol_in_air : Surface Concentration of SO4 -->
+   <field id="CMIP6_sconcss"       field_ref="dummy_not_provided"          /> <!-- P1 (kg m-3) mass_concentration_of_seasalt_dry_aerosol_in_air : Surface Concentration of Seasalt -->
+   <field id="CMIP6_sfcWind"       field_ref="wind10m"          />  <!-- P1 (m s-1) wind_speed : Near surface wind speed -->
+   <field id="CMIP6_sfcWindmax"    field_ref="dummy_not_provided" freq_op="1d"   > @sfcWindmax </field> <!-- P1 (m s-1) wind_speed : Mean Daily Maximum Near-Surface Wind Speed --> 
+   <field id="CMIP6_sftlf"         field_ref="dummy_not_provided"> pourc_ter+pourc_lic </field> <!-- P1 (%) land_area_fraction : Land Area Fraction -->
+   <field id="CMIP6_siltfrac"      field_ref="dummy_not_provided"       /> <!-- P1 (1.0)  : Silt Fraction -->
+   <field id="CMIP6_smc"           field_ref="f_th"        /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_shallow_convective_mass_flux : The net mass flux represents the difference between the updraft and downdraft components.  For models with a distinct shallow convection scheme, this is calculated as convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_snmsl"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux_into_soil_layer : surface_snow_melt_flux_into_soil_layer -->
+   <field id="CMIP6_snowmxrat"     field_ref="dummy_not_provided"         /> <!-- P2 (1.0) mass_fraction_of_snow_in_air : snow_mixing_ratio -->
+   <field id="CMIP6_snrefr"        field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : surface_snow_and_ice_refreezing_flux -->
+   <field id="CMIP6_snwc"          field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) canopy_snow_amount : canopy_snow_amount -->
+   <field id="CMIP6_solbnd"        field_ref="dummy_not_provided"         />  <!-- P1 (W m-2) solar_irradiance : Top-of-Atmosphere Solar Insolation for each band -->
+   <field id="CMIP6_swsffluxaero"  field_ref="topswad"         /> <!-- P2 (W m-2) shortwave__flux_due_to_volcanic_aerosols_at__the_surface : downwelling shortwave  flux due to volcanic aerosols at  the surface to be diagnosed through double radiation call -->
+   <field id="CMIP6_swsrfasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) tendency_of_all_sky_surface_shortwave_flux_due_to_dust_ambient_aerosol_particles : All-sky Surface Shortwave radiative flux due to Dust -->
+   <field id="CMIP6_swsrfcsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) tendency_of_clear_sky_surface_shortwave_flux_due_to_dust_ambient_aerosol_particles : Clear-sky Surface Shortwave radiative flux due to Dust -->
+   <field id="CMIP6_swtoaasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_shortwave_forcing : all sky sw-rf dust at toa -->
+   <field id="CMIP6_swtoacsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_shortwave_forcing : clear sky sw-rf dust at toa -->
+   <field id="CMIP6_swtoafluxaerocs" field_ref="topswad0"       /> <!-- P1 (W m-2) shortwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling shortwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call -->
+   <field id="CMIP6_sza"           field_ref="dummy_not_provided"              /> <!-- P1 (degree) solar_zenith_angle : solar zenith angle -->
+   <field id="CMIP6_t2"            field_ref="dummy_not_provided"> temp*temp   </field> <!-- P2 (K2) square_of_air_temperature : square_of_air_temperature -->
+   <field id="CMIP6_ta"            field_ref="temp"             /> <!-- P1 (K) air_temperature : Air Temperature -->
+   <field id="CMIP6_tas"           field_ref="t2m"              /> <!-- P1 (K) air_temperature : This is sampled synoptically. -->
+   <field id="CMIP6_tas_ist"       field_ref="t2m_lic"          /> <!-- P1 (K) air_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tasmaxCrop"    field_ref="dummy_not_provided"         /> <!-- P1 (K) air_temperature : Daily Maximum Near-Surface Air Temperature over Crop Tile -->
+   <field id="CMIP6_tasmax"        field_ref="dummy_not_provided" freq_op="1d"> @tasmax </field> <!-- P1 (K) air_temperature : monthly mean of the daily-maximum near-surface air temperature. -->  
+   <field id="CMIP6_tasminCrop"    field_ref="dummy_not_provided"         /> <!-- P1 (K) air_temperature : Daily Minimum Near-Surface Air Temperature over Crop Tile -->
+   <field id="CMIP6_tasmin"        field_ref="dummy_not_provided" freq_op="1d"> @tasmin  </field> <!-- P1 (K) air_temperature : Daily Minimum Near-Surface Air Temperature -->  
+   <field id="CMIP6_tau_stress"    field_ref="taux"              >  sqrt( taux^2 + tauy^2)        </field> <!-- P1 (N m-2) surface_downward_stress : Momentum flux --> 
+   <field id="CMIP6_tauu"          field_ref="taux"             /> <!-- P1 (Pa) surface_downward_eastward_stress : Surface Downward Eastward Wind Stress -->
+   <field id="CMIP6_tauupbl"       field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_downward_eastward_stress_due_to_planetary_boundary_layer : surface -->
+   <field id="CMIP6_tauv"          field_ref="tauy"             /> <!-- P1 (Pa) surface_downward_northward_stress : Surface Downward Northward Wind Stress --> 
+   <field id="CMIP6_tauvpbl"       field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_downward_northward_stress_due_to_planetary_boundary_layer : surface -->
+   <field id="CMIP6_tdps"          field_ref="dummy_not_provided"> 273.16 + (273.16 - 35.86)/(17.269/log(pvap/611.14)-1.)      </field> <!-- P1 (K) dew_point_temperature : 2m dewpoint temperature -->
+   <field id="CMIP6_tendacabf"     field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_surface_mass_balance : Greenland -->
+   <field id="CMIP6_tendlibmassbf" field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_basal_mass_balance : Antarctica -->
+   <field id="CMIP6_tendlicalvf"   field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_calving : Antarctica -->
+   <field id="CMIP6_tnhusa"        field_ref="dqdyn"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_advection : Tendency of Specific Humidity due to Advection -->
+   <field id="CMIP6_tnhusc"        field_ref="tnhusc"           /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_convection : Tendencies from cumulus convection scheme. -->
+   <field id="CMIP6_tnhusd"        field_ref="dqvdf"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_diffusion : This includes any horizontal or vertical numerical moisture diffusion not associated with the parametrized moist physics or the resolved dynamics.  For example, any vertical diffusion which is part of the boundary layer mixing scheme should be excluded, as should any diffusion which is included in the terms from the resolved dynamics.   This term is required to check the closure of the moisture budget. -->
+   <field id="CMIP6_tnhus"         field_ref="tnhus"            /> <!-- P1 (s-1) tendency_of_specific_humidity : Tendency of Specific Humidity -->
+   <field id="CMIP6_tnhusmp"       field_ref="dqphy"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_model_physics : This includes sources and sinks from parametrized moist physics (e.g. convection, boundary layer, stratiform condensation/evaporation, etc.) and excludes sources and sinks from resolved dynamics or from horizontal or vertical numerical diffusion not associated with model physicsl.  For example any diffusive mixing by the boundary layer scheme would be included. -->
+   <field id="CMIP6_tnhuspbl"      field_ref="dqvdf"             > dqvdf+dqthe </field> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_boundary_layer_mixing : alevel site time1 -->
+   <field id="CMIP6_tnhusscpbl"    field_ref="tnhusscpbl"       /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing : To be specified only in  models which do not separate budget terms for stratiform cloud, precipitation and boundary layer schemes.  Includes all bounday layer terms including and diffusive terms. -->
+   <field id="CMIP6_tnhusscp"      field_ref="dqlscst"          /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_stratiform_clouds_and_precipitation : Tendency of Specific Humidity Due to Stratiform Clouds and Precipitation -->
+   <field id="CMIP6_tnta"          field_ref="dtdyn"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_advection : Tendency of Air Temperature due to Advection -->
+   <field id="CMIP6_tntc"          field_ref="tntc"             /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_convection : zonal mean; hence YZT -->
+   <field id="CMIP6_tntd"          field_ref="dtajs"             > dtajs+dtoro+dtlif+dthin </field> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_numerical_diffusion : Tendency of Air Temperature due to Numerical Diffusion -->
+   <field id="CMIP6_tnt"           field_ref="tnt"              /> <!-- P1 (K s-1) tendency_of_air_temperature : Tendency of Air Temperature -->
+   <field id="CMIP6_tntmp"         field_ref="dtphy"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_model_physics : This includes sources and sinks from parametrized physics (e.g. radiation, convection, boundary layer, stratiform condensation/evaporation, etc.). It excludes sources and sinks from resolved dynamics and numerical diffusion not associated with parametrized physics.  For example, any vertical diffusion which is part of the boundary layer mixing scheme should be included, while numerical diffusion applied in addition to physics or resolved dynamics should be excluded.  This term is required to check the closure of the heat budget. -->
+   <field id="CMIP6_tntnogw"       field_ref="dummy_XYA"        /> <!-- P2 (K s-1) temperature_tendency_due_to_dissipation_nonorographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_tntogw"        field_ref="dtoro"            /> <!-- P2 (K s-1) temperature_tendency_due_to_dissipation_orographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_tntpbl"        field_ref="dtvdf"             > dtvdf + dtthe </field> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_boundary_layer_mixing : alevel site time1 -->
+   <field id="CMIP6_tntr"          field_ref="tntr"             /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_radiative_heating : Tendency of Air Temperature due to Radiative Heating -->
+   <field id="CMIP6_tntrlcs"       field_ref="dtlw0"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_longwave_heating_assuming_clear_sky : zonal mean; hence YZT -->
+   <field id="CMIP6_tntrscs"       field_ref="dtsw0"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_shortwave_heating_assuming_clear_sky : zonal mean; hence YZT -->
+   <field id="CMIP6_tntscpbl"      field_ref="tntscpbl"         /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing : To be specified only in  models which do not separate cloud, precipitation and boundary layer terms.  Includes all boundary layer terms including diffusive ones. -->
+   <field id="CMIP6_tntscp"        field_ref="dtlschr"          /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_stratiform_clouds_and_precipitation : alevel site time1 -->
+   <field id="CMIP6_tr"            field_ref="tsol"             /> <!-- P1 (K) surface_temperature : Surface Radiative Temperature -->
+   <field id="CMIP6_ts"            field_ref="tsol"             /> <!-- P1 (K) surface_temperature : Surface temperature (skin for open ocean) -->
+   <field id="CMIP6_ts_ist"        field_ref="tsol_lic"         /> <!-- P1 (K) surface_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsns"          field_ref="dummy_not_provided"         /> <!-- P1 (K) surface_temperature : Snow Surface Temperature -->
+   <field id="CMIP6_twap"          field_ref="dummy_not_provided"> </field> <!-- P2 (K Pa s-1) product_of_omega_and_air_temperature : air_temperature_times_omega -->
+   <field id="CMIP6_u2"            field_ref="vitu"              > vitu*vitu</field> <!-- P2 (m2 s-2) square_of_eastward_wind : square_of_eastward_wind -->
+   <field id="CMIP6_ua"            field_ref="vitu"             /> <!-- P1 (m s-1) eastward_wind : Eastward Wind -->
+   <field id="CMIP6_uas"           field_ref="u10m"             /> <!-- P1 (m s-1) eastward_wind : Eastward Near-Surface Wind -->
+   <field id="CMIP6_uqint"         field_ref="uq"               /> <!-- P1 (m2 s-1) integral_of_product_of_eastward_wind_and_specific_humidity_wrt_height : Eastward integrated moisture transport -->
+   <field id="CMIP6_utendepfd"     field_ref="dummy_XYA"        /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_eliassen_palm_flux_divergence : Called "acceldivf" in CCMI table; we suggest new name. zonal mean; hence YZT -->
+   <field id="CMIP6_utendnogw"     field_ref="dummy_not_provided"> du_gwd_rando + du_gwd_front </field> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_nonorographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_utendogw"      field_ref="duoro"        /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_orographic_gravity_wave_drag : u-tendency orographic gravity wave drag -->
+   <field id="CMIP6_utendvtem"     field_ref="dummy_XYA"        /> <!-- P1 (m s-1 d-1) u-tendency_by_wstar_advection : zonal mean; hence YZT -->
+   <field id="CMIP6_utendwtem"     field_ref="dummy_XYA"        /> <!-- P1 (m s-1 d-1) u-tendency_by_vstar_advection : zonal mean; hence YZT -->
+   <field id="CMIP6_ut"            field_ref="vitu"              > vitu*temp </field> <!-- P2 (K m s-1) product_of_eastward_wind_and_air_temperature : air_temperature_times_eastward_wind -->
+   <field id="CMIP6_uv"            field_ref="dummy_not_provided"> vitu*vitv  </field> <!-- P2 (m2 s-2) product_of_eastward_wind_and_northward_wind : eastward_wind_times_northward_wind -->
+   <field id="CMIP6_uwap"          field_ref="dummy_not_provided"> vitu*vitw  </field> <!-- P2 (Pa m s-2) product_of_eastward_wind_and_omega : eastward_wind_times_omega -->
+   <field id="CMIP6_v2"            field_ref="dummy_not_provided"> vitv*vitv  </field> <!-- P2 (m2 s-2) square_of_northward_wind : square_of_northwardwind -->
+   <field id="CMIP6_va"            field_ref="vitv"             /> <!-- P1 (m s-1) northward_wind : Northward Wind -->
+   <field id="CMIP6_vas"           field_ref="v10m"             /> <!-- P1 (m s-1) northward_wind : Northward Near-Surface Wind -->
+   <field id="CMIP6_vortmean"      field_ref="dummy_XY"         /> <!-- P1 (s-1) atmosphere_relative_vorticity : Mean vorticity over 850-600 hPa layer -->
+   <field id="CMIP6_vqint"         field_ref="vq"               /> <!-- P1 (m2 s-1) integral_of_product_of_northward_wind_and_specific_humidity_wrt_height : Northward integrated moisture transport -->
+   <field id="CMIP6_vtem"          field_ref="dummy_XYA"        /> <!-- P1 (m s-1) northward_transformed_eulerian_mean_air_velocity : Transformed Eulerian Mean northward wind --> 
+   <field id="CMIP6_vtendnogw"     field_ref="dummy_not_provided"> + dv_gwd_front </field> <!-- P2 (m s-2) tendency_of_northward_wind_due_to_nonorographic_gravity_wave_drag : v-tendency nonorographic gravity wave drag -->
+   <field id="CMIP6_vtendogw"      field_ref="dvoro"        /> <!-- P2 (m s-2) tendency_of_northward_wind_due_to_orographic_gravity_wave_drag : v-tendency orographic gravity wave drag -->
+   <field id="CMIP6_vt"            field_ref="dummy_not_provided"> vitv*temp  </field> <!-- P2 (K m s-1) product_of_northward_wind_and_air_temperature : air_temperature_times_northward_wind -->
+   <field id="CMIP6_vwap"          field_ref="dummy_not_provided"> vitv*vitw  </field> <!-- P2 (Pa m s-2) product_of_northward_wind_and_omega : northward_wind_times_omega -->
+   <field id="CMIP6_wap2"          field_ref="dummy_not_provided"> vitw*vitw  </field> <!-- P2 (Pa2 s-2) square_of_lagrangian_tendency_of_air_pressure : square_of_omega -->
+   <field id="CMIP6_wap"           field_ref="vitw"             /> <!-- P1 (Pa s-1) lagrangian_tendency_of_air_pressure : commonly referred to as "omega", this represents the vertical component of velocity in pressure coordinates (positive down) -->
+   <field id="CMIP6_wbptemp"       field_ref="dummy_XYA"        /> <!-- P1 (K) wet_bulb_potential_temperature : plev_7 -->
+   <field id="CMIP6_wtem"          field_ref="dummy_XYA"        /> <!-- P1 (m s-1)  : Transformed Eulerian Mean upward wind -->
+   <field id="CMIP6_xgwdparam"     field_ref="east_gwstress"    /> <!-- P2 (Pa) atmosphere_eastward_stress_due_to_gravity_wave_drag : x_gravity_wave_drag_param --> 
+   <field id="CMIP6_ygwdparam"     field_ref="west_gwstress"    /> <!-- P2 (Pa) atmosphere_northward_stress_due_to_gravity_wave_drag : y_gravity_wave_drag_param -->
+   <field id="CMIP6_zfull"         field_ref="zfull"            /> <!-- P2 (m) height_above_reference_ellipsoid : This is actual height above mean sea level, not geopotential height -->
+   <field id="CMIP6_zg"            field_ref="dummy_not_provided"            /> <!-- P1 (m) geopotential_height : Geopotential height on the 1000 hPa surface -->
+   <field id="CMIP6_zhalf"         field_ref="zhalf"            /> <!-- P2 (m) height_above_reference_ellipsoid : This is actual height above mean sea level, not geopotential height.  This is actual height above mean sea level, not geopotential height.  Includes both the top of the model atmosphere and surface levels. -->
+   <field id="CMIP6_zmla"          field_ref="s_pblh"           /> <!-- P1 (m) atmosphere_boundary_layer_thickness : Height of Boundary Layer -->
+   <field id="CMIP6_zmlwaero"      field_ref="dummy_not_provided"        /> <!-- P1 (K s-1) longwave_heating_rate_due_to_volcanic_aerosols : longwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required -->
+   <field id="CMIP6_zmswaero"      field_ref="dummy_not_provided"        /> <!-- P1 (K s-1) shortwave_heating_rate_due_to_volcanic_aerosols : shortwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required -->
+   <field id="CMIP6_zmtnt"         field_ref="dtphy"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_diabatic_processes : Zonal Mean Diabatic Heating Rates -->
+   <field id="CMIP6_ap" field_ref="Ahyb" /><!-- Ap hybrid coordinate array for level interfaces -->
+   <field id="CMIP6_ap_bnds" field_ref="Ahyb_bounds" /><!-- Ap hybrid coordinate bounds -->
+   <field id="CMIP6_b" field_ref="Bhyb" /><!-- Bp hybrid coordinate array for level interfaces -->
+   <field id="CMIP6_b_bnds" field_ref="Bhyb_bounds" /><!-- Bp hybrid coordinate bounds -->
+   <field id="CMIP6_ahp" field_ref="Ahyb_mid" /><!-- Aps hybrid coordinate array for mid-levels -->
+   <field id="CMIP6_ahp_bnds" field_ref="Ahyb_mid_bounds" /><!-- Aps hybrid coordinate bounds -->
+   <field id="CMIP6_bh" field_ref="Bhyb_mid" /><!-- Bps hybrid coordinate array for mid-levels -->
+   <field id="CMIP6_bh_bnds" field_ref="Bhyb_mid_bounds" /><!-- Bps hybrid coordinate bounds -->
+
+<!-- for variables which realm equals one of _aerosol-->
+   <field id="CMIP6_abs550aer"     field_ref="dummy_not_provided"         /> <!-- P1 (1.0) atmosphere_absorption_optical_thickness_due_to_ambient_aerosol : Ambient Aerosol Absorption Optical Thickness at 550 nm -->
+   <field id="CMIP6_airmass"       field_ref="mass"        /> <!-- P1 (kg m-2) atmosphere_mass_of_air_per_unit_area : Vertically integrated mass content of air in layer -->
+   <field id="CMIP6_aoanh"         field_ref="dummy_XYA"        /> <!-- P1 (yr) tracer_lifetime : Fixed surface layer mixing ratio over 30o-50oN (0 ppbv), uniform fixed source (at all levels) everywhere else (source is unspecified but must be constant in space and time and documented). Note that the source could be 1yr/yr, so the tracer concentration provides mean age in years. For method using linearly increasing tracer include a method attribute: "linearly increasing tracer"For method using uniform source (1yr/yr) include a method attribute: "uniform source" -->
+   <field id="CMIP6_bldep"         field_ref="dummy_XY"         /> <!-- P3 (m) atmosphere_boundary_layer_thickness : Boundary layer depth -->
+   <field id="CMIP6_bry"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_inorganic_bromine_in_air : Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Bry = Br + BrO + HOBr + HBr + BrONO2 + BrCl Definition: Total inorganic bromine (e.g., HBr and inorganic bromine oxides and radicals (e.g., BrO, atomic bromine (Br), bromine nitrate (BrONO2)) resulting from degradation of bromine-containing organic source gases (halons, methyl bromide, VSLS), and natural inorganic bromine sources (e.g., volcanoes, sea salt, and other aerosols) add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_bs550aer"      field_ref="dummy_XYA"        /> <!-- P1 (m-1 sr-1) volume_lidar_backwards_scattering_coefficient_in_air_due_to_ambient_aerosol_particles : Aerosol  Backscatter at 550nm and 180 degrees, computed from extinction and lidar ratio -->
+   <field id="CMIP6_c2h2"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ethyne_in_air : C2H2 volume mixing ratio -->
+   <field id="CMIP6_c2h6"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ethane_in_air : C2H6 volume mixing ratio -->
+   <field id="CMIP6_c3h6"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_propene_in_air : C3H6  volume mixing ratio -->
+   <field id="CMIP6_c3h8"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_propane_in_air : C3H8  volume mixing ratio -->
+   <field id="CMIP6_ccn"           field_ref="dummy_XY"         /> <!-- P1 (m-3) number_concentration_of_cloud_condensation_nuclei_at_stp_in_air : proposed name: number_concentration_of_ambient_aerosol_in_air_at_liquid_water_cloud_top -->
+   <field id="CMIP6_cdnc"          field_ref="scdnc" expr="@scdnc / @lcc3d " > scdnc / lcc3d        </field><!-- P1 (m-3) number_concentration_of_cloud_liquid_water_particles_in_air : Cloud Droplet Number Concentration in liquid water clouds. -->
+   <field id="CMIP6_ch3coch3"      field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_acetone_in_air : CH3COCH3  volume mixing ratio -->
+   <field id="CMIP6_cheaqpso4"     field_ref="dummy_XYA"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_aqueous_phase_net_chemical_production : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_aqueous_phase_net_chemical_production -->
+   <field id="CMIP6_chegpso4"      field_ref="dummy_XYA"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_gaseous_phase_net_chemical_production : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_gas_phase_net_chemical_production -->
+   <field id="CMIP6_chepasoa"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : anthropogenic part of chepsoa -->
+   <field id="CMIP6_chepsoa"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : If model lumps SOA emissions with POA, then the sum of POA and SOA emissions is reported as OA emissions. ""mass"" refers to the mass of primary organic matter, not mass of organic carbon alone. -->
+   <field id="CMIP6_cly"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_inorganic_chlorine_in_air : Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Cly = HCl + ClONO2 + HOCl + ClO + Cl + 2*Cl2O2 +2Cl2 + OClO + BrCl Definition: Total inorganic stratospheric chlorine (e.g., HCl, ClO) resulting from degradation of chlorine-containing source gases (CFCs, HCFCs, VSLS), and natural inorganic chlorine sources (e.g., sea salt and other aerosols) add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_cod"           field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_cloud : Cloud Optical Depth -->
+   <field id="CMIP6_dms"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_dimethyl_sulfide_in_air : DMS volume mixing ratio -->
+   <field id="CMIP6_ec550aer"      field_ref="ec550aer"        /> <!-- P1 (m-1) volume_extinction_coefficient_in_air_due_to_ambient_aerosol_particles : Aerosol Extinction at 550nm -->
+   <field id="CMIP6_emiaco"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : anthrophogenic  emission of CO -->
+   <field id="CMIP6_emianox"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : Store flux as Nitrogen. Anthropogenic fraction. NOx=NO+NO2, Includes agricultural waste burning but no other biomass burning. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiaoa"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : anthropogenic part of emioa -->
+   <field id="CMIP6_emibvoc"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_biogenic_nmvoc_expressed_as_carbon_due_to_emission : Integrate 3D emission field vertically to 2d field._If_ fixed molecular weight of NMVOC is not available in model, please provide in units of kilomole m-2 s-1 (i.e. kg m-2 s-1 as if model NMVOC had molecular weight of 1) and add a comment to your file. -->
+   <field id="CMIP6_emico"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emilnox"       field_ref="dummy_XYA"        /> <!-- P1 (mol s-1) tendency_of_atmosphere_moles_of_nox_expressed_as_nitrogen : Integrate the NOx production for lightning over model layer. proposed name: tendency_of_atmosphere_mass_content_of_nox_from_lightning -->
+   <field id="CMIP6_eminox"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : NOx=NO+NO2. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emivoc"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission : Integrate 3D emission field vertically to 2d field. _If_ fixed molecular weight of NMVOC is not available in model, please provide in units of kilomole m-2 s-1 (i.e. kg m-2 s-1 as if model NMVOC had molecular weight of 1) and add a comment to your file. -->
+   <field id="CMIP6_hcho"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_formaldehyde_in_air : Formaldehyde volume mixing ratio -->
+   <field id="CMIP6_hcl"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydrogen_chloride_in_air : HCl volume mixing ratio -->
+   <field id="CMIP6_hno3"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitric_acid_in_air : HNO3 volume mixing ratio -->
+   <field id="CMIP6_ho2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydroperoxyl_radical_in_air : HO2 volume mixing ratio -->
+   <field id="CMIP6_isop"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_isoprene_in_air : Isoprene volume mixing ratio -->
+   <field id="CMIP6_jno2"          field_ref="dummy_XYA"        /> <!-- P1 (s-1) photolysis_rate_of_nitrogen_dioxide : photolysis rate of NO2 -->
+   <field id="CMIP6_lossch4"       field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_methane_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lossco"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_of_mole_concentration_of_carbon_monoxide_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lossn2o"       field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_of_mole_concentration_of_nitrous_oxide_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lwp"           field_ref="cldq"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_cloud_liquid_water : liquid water path -->
+   <field id="CMIP6_maxpblz"       field_ref="dummy_XY"         /> <!-- P1 (m) atmosphere_boundary_layer_thickness : maximum boundary layer height during the day (add cell_methods attribute: "time: maximum") -->
+   <field id="CMIP6_meanage"       field_ref="dummy_XYA"        /> <!-- P1 (yr) age_of_stratospheric_air : The mean age of air is defined as the mean time that a stratospheric air mass has been out of contact with the well-mixed troposphere. -->
+   <field id="CMIP6_minpblz"       field_ref="dummy_XY"         /> <!-- P1 (m) atmosphere_boundary_layer_thickness : minimum boundary layer height during the day (add cell_methods attribute: "time: minimum") -->
+   <field id="CMIP6_nh50"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_artificial_tracer_with_fixed_lifetime_in_air : Fixed surface layer mixing ratio over 30o-50oN (100ppbv), uniform fixed 50-day exponential decay. -->
+   <field id="CMIP6_no2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 volume mixing ratio -->
+   <field id="CMIP6_no"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_monoxide_in_air : NO volume mixing ratio -->
+   <field id="CMIP6_noy"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_noy_expressed_as_nitrogen_in_air : Total family (the sum of all appropriate species in the model); list the species in the netCDF header, e.g. NOy = N + NO + NO2 + NO3 + HNO3 + 2N2O5 + HNO4 + ClONO2 + BrONO2 Definition: Total reactive nitrogen; usually includes atomic nitrogen (N), nitric oxide (NO), NO2, nitrogen trioxide (NO3), dinitrogen radical (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), BrONO2, ClONO2 add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_o3loss"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_destruction : ONLY provide the sum of the following reactions: (i) O(1D)+H2O; (ii) O3+HO2; (iii) O3+OH; (iv) O3+alkenes (isoprene, ethene,...) -->
+   <field id="CMIP6_o3prod"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_production : ONLY provide the sum of all the HO2/RO2 + NO reactions (as k*[HO2]*[NO]) -->
+   <field id="CMIP6_o3ste"         field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Ozone tracer intended to map out strat-trop exchange (STE) of ozone. -->
+   <field id="CMIP6_od440aer"      field_ref="dummy_not_provided"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 440 nm" -->
+   <field id="CMIP6_od550aer"      field_ref="od550aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 550 nm" -->
+   <field id="CMIP6_od550bb"       field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : total organic aerosol AOD due to biomass burning (excluding so4, nitrate BB components) -->
+   <field id="CMIP6_od550csaer"    field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols in clear skies if od550aer is for all-sky (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 550 nm" -->
+   <field id="CMIP6_od870aer"      field_ref="od865aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 870 nm" -->
+   <field id="CMIP6_oh"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydroxyl_radical_in_air : OH volume mixing ratio -->
+   <field id="CMIP6_pan"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_peroxyacetyl_nitrate_in_air : PAN volume mixing ratio -->
+   <field id="CMIP6_photo1d"       field_ref="dummy_XYA"        /> <!-- P1 (s-1) photolysis_rate_of_ozone_to_1D_oxygen_atom : proposed name: photolysis_rate_of_ozone_to_O1D -->
+   <field id="CMIP6_pod0"          field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) pending_CF_name : Accumulated stomatal ozone flux over the threshold of 0 mol m-2 s-1; Computation: Time Integral of (hourly above canopy ozone concentration * stomatal conductance * Rc/(Rb+Rc) ) -->
+   <field id="CMIP6_ptp"           field_ref="dummy_XY"         /> <!-- P1 (Pa) tropopause_air_pressure : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+   <field id="CMIP6_reffclwtop"    field_ref="reffclwtop"         /> <!-- P1 (m) effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_top : Droplets are liquid only.  This is the effective radius as seen from space over liquid cloudy portion of grid cell. This is the value from uppermost model layer with liquid cloud or, if available, or for some models it is the sum over all liquid cloud tops, no matter where they occur, as long as they are seen from the top of the atmosphere.TOA) each time sample when computing monthly mean. Reported values are weighted by total liquid cloud top fraction of  (as seen from -->
+   <field id="CMIP6_rlutaf"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : Flux corresponding to rlut resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rlutcsaf"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : Flux corresponding to rlutcs resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rsutaf"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : Flux corresponding to rsut resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rsutcsaf"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : Flux corresponding to rsutcs resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_sedustCI"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_sedimentation : Balkanski - LSCE -->
+   <field id="CMIP6_sfno2"         field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfo3"          field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : O3 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfo3max"       field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Daily maximum O3 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfpm25"        field_ref="dummy_XY"         /> <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_ambient_aerosol_particles_in_air : PM2.5 mass mixing ratio in lowest model layer -->
+   <field id="CMIP6_so2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_sulfur_dioxide_in_air : SO2 volume mixing ratio -->
+   <field id="CMIP6_tatp"          field_ref="dummy_not_provided"         /> <!-- P1 (K) tropopause_air_temperature : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+   <field id="CMIP6_tntrl"         field_ref="dummy_XYA"        /> <!-- P3 (K s-1) tendency_of_air_temperature_due_to_longwave_heating : Tendency of air temperature due to longwave radiative heating -->
+   <field id="CMIP6_tntrs"         field_ref="dummy_XYA"        /> <!-- P3 (K s-1) tendency_of_air_temperature_due_to_shortwave_heating : Tendency of air temperature due to shortwave radiative heating -->
+   <field id="CMIP6_toz"           field_ref="dummy_XY"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Total ozone column calculated at 0 degrees C and 1 bar, such that 1m = 1e5 DU. -->
+   <field id="CMIP6_tropoz"        field_ref="dummy_XY"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Tropospheric ozone column, should be consistent with definition of tropopause used to calculate the pressure of the tropopause (ptp). Calculated at 0 degrees C and 1 bar, such that 1m = 1e5 DU. -->
+   <field id="CMIP6_ttop"          field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature_at_cloud_top : air temperature at cloud top -->
+   <field id="CMIP6_wa"            field_ref="dummy_XYA"        /> <!-- P1 (m s-1) upward_air_velocity : Upward Air Velocity -->
+   <field id="CMIP6_ztp"           field_ref="dummy_not_provided"         /> <!-- P1 (m) tropopause_altitude : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+<!-- for variables which realm equals one of _atmosChem-->
+   <field id="CMIP6_flashrate"     field_ref="dummy_XY"         /> <!-- P1 (km-2 s-1) lightning_flash_rate : proposed name: lightning_flash_rate (units to be interpreted as "counts km-2 s-1) -->
+   <field id="CMIP6_oxloss"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom_due_to_chemical_destruction : total chemical loss rate for o+o1d+o3 -->
+   <field id="CMIP6_oxprod"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom_due_to_chemical_production_and_photolysis : total production rate of o+o1d+o3 including o2 photolysis and all o3 producing reactions -->
+   <field id="CMIP6_vmrox"         field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom : Mole Fraction of Ox -->
+<!-- for variables which realm equals one of _landIce-->
+   <field id="CMIP6_acabf"         field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_surface_specific_mass_balance_flux : quantity averaged over ice sheet only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_acabfIs"       field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_surface_specific_mass_balance_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_agesno"        field_ref="dummy_XY"         /> <!-- P1 (day) age_of_surface_snow : When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.  Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_hfdsn"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_heat_flux_in_snow : the net downward heat flux from the atmosphere into the snow that lies on land divided by the land area in the grid cell; reported as missing for snow-free land regions or where the land fraction is 0. -->
+   <field id="CMIP6_hfgeoubed"     field_ref="dummy_XY"         /> <!-- P3 (W m-2) upward_geothermal_heat_flux_at_ground_level_in_land_ice : Geothermal Heat flux beneath land ice -->
+   <field id="CMIP6_hfgeoubed_ist" field_ref="dummy_XY"         /> <!-- P3 (W m-2) upward_geothermal_heat_flux_at_ground_level_in_land_ice : Geothermal Heat flux beneath land ice -->
+   <field id="CMIP6_hflsIs"        field_ref="lat_lic" > -1.0 * lat_lic </field> <!-- P1 (W m-2) surface_upward_latent_heat_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_hfssIs"        field_ref="sens_lic" > -1.0 * sens_lic </field> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_icem"          field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_surface_melt_flux : Surface ice melt flux -->
+   <field id="CMIP6_icemIs"        field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_surface_melt_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_libmassbffl"   field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_basal_specific_mass_balance_flux : quantity averaged over floating ice shelf -->
+   <field id="CMIP6_libmassbfgr"   field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_basal_specific_mass_balance_flux : quantity averaged over grounded ice sheet -->
+   <field id="CMIP6_licalvf"       field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_specific_mass_flux_due_to_calving : Land ice calving flux -->
+   <field id="CMIP6_lifmassbf"     field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_specific_mass_flux_due_to_calving_and_ice_front_melting : Land ice vertical front mass balance flux -->
+   <field id="CMIP6_litempbotfl"   field_ref="dummy_XY"         /> <!-- P2 (K) land_ice_basal_temperature : quantity averaged over floating land ice -->
+   <field id="CMIP6_litempbotgr"   field_ref="dummy_XY"         /> <!-- P2 (K) land_ice_basal_temperature : quantity averaged over grounded land ice -->
+   <field id="CMIP6_litemptop"     field_ref="dummy_XY"         /> <!-- P2 (K) temperature_at_top_of_ice_sheet_model : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_litemptopIs"   field_ref="dummy_XY"         /> <!-- P2 (K) temperature_at_top_of_ice_sheet_model : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_lithk_ist"     field_ref="dummy_XY"         /> <!-- P2 (m) land_ice_thickness : This is needed in case ice sheet thickness changes in time -->
+   <field id="CMIP6_lwsnl"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_snow_layer : where land over land: this is computed as the total mass of liquid water contained interstitially within the snow layer of the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_modelCellAreai" field_ref="dummy_XY"         /> <!-- P1 (m2) cell_area : When interpolated to a regular grid, it should be interpolated (not summed) with a conservative scheme to preserve total area -->
+   <field id="CMIP6_mrfso"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2) soil_frozen_water_content : the mass (summed over all all layers) of frozen water. -->
+   <field id="CMIP6_mrroIs"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) runoff_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_orogIs"        field_ref="phis" > phis / 9.81  </field>  <!-- P1 (m) surface_altitude : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_pflw"          field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_permafrost_layer : "where land over land", i.e., this is the total mass of liquid water contained within the permafrost layer within the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_prraIs"        field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) rainfall_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_prsnIs"        field_ref="snow"         /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rldsIs"        field_ref="LWdnSFC"     /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rlusIs"        field_ref="LWdnSFC" > pourc_lic &gt; 0 ? (LWdnSFC - flw_lic) : $missing_value </field>  <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rsdsIs"        field_ref="SWdnSFC"   /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rsusIs"        field_ref="SWdnSFC" > pourc_lic &gt; 0 ? (SWdnSFC - fsw_lic) : $missing_value </field>  <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sbl"           field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : The snow and ice sublimation flux is the loss of snow and ice mass from the surface resulting from their conversion to water vapor that enters the atmosphere. -->
+   <field id="CMIP6_sbl_land"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : surface_snow_and_ice_sublimation_flux -->
+   <field id="CMIP6_sbl_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : Surface Snow and Ice Sublimation Flux -->
+   <field id="CMIP6_sblIs"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sftflf"        field_ref="dummy_XY"       /> <!-- P2 (%) floating_ice_shelf_area_fraction : This is needed to distinguish between grounded glaciated ice (grounded = ice sheet and glacier) and ice shelves (floating over sea water), since land_ice is by definition ice sheet, glacier and ice shelves -->
+   <field id="CMIP6_sftgrf"        field_ref="pourc_lic"         /> <!-- P1 (%) grounded_ice_sheet_area_fraction : This is needed in case the grounded ice sheet area changes in time (NO floating ice shelf) -->
+   <field id="CMIP6_snc"           field_ref="fsnow" > fsnow * 100.  </field> <!-- P1 (%) surface_snow_area_fraction : Fraction of each grid cell that is occupied by snow that rests on land portion of cell. -->
+   <field id="CMIP6_snc_ist"       field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice sheet  only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sncIs"         field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snd"           field_ref="dummy_XY"         /> <!-- P1 (m) surface_snow_thickness : where land over land, this is computed as the mean thickness of snow in the land portion of the grid cell (averaging over the entire land portion, including the snow-free fraction).  Reported as missing where the land fraction is 0. -->
+   <field id="CMIP6_snicefreez"    field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : Surface snow and ice refreeze flux -->
+   <field id="CMIP6_snicefreezIs"  field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snicem"        field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_melt_flux : Surface snow and ice melt flux -->
+   <field id="CMIP6_snicemIs"      field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_melt_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snm_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Surface Snow Melt -->
+   <field id="CMIP6_snm_land"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Computed as the total surface melt water on the land portion of the grid cell divided by the land area in the grid cell; report as 0.0 for snow-free land regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_snmIs"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Loss of snow mass resulting from surface melting. Computed as the surface melt water from snow on the ice sheet portion of the grid cell divided by the ice_sheet area in the grid cell; report as 0.0 for snow-free land_ice regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_sootsn"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2) soot_content_of_surface_snow : the entire land portion of the grid cell is considered, with snow soot content set to 0.0 in regions free of snow. -->
+   <field id="CMIP6_strbasemag"    field_ref="dummy_XY"         /> <!-- P3 (Pa) magnitude_of_basal_drag_at_land_ice_base : Land Ice Basal Drag -->
+   <field id="CMIP6_tasIs"         field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_topg"          field_ref="dummy_XY"         /> <!-- P2 (m) bedrock_altitude : Bedrock Altitude -->
+   <field id="CMIP6_topg_ist"      field_ref="dummy_XY"         /> <!-- P2 (m) bedrock_altitude : This is needed in case bed rock elevation changes in time -->
+   <field id="CMIP6_tpf"           field_ref="dummy_XY"         /> <!-- P1 (m) permafrost_layer_thickness : where land over land: This is the mean thickness of the permafrost layer in the land portion of the grid cell.  Reported as missing in permafrost-free regions. -->
+   <field id="CMIP6_tsIs"          field_ref="tsol_lic" > pourc_lic &gt; 0 ? tsol_lic : $missing_value </field>  <!-- P1 (K) surface_temperature : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : This temperature is averaged over all the snow in the grid cell that rests on land or land ice.  When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.   Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_tsnIs"         field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_xvelbase"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_basal_x_velocity : X-component of land ice basal velocity -->
+   <field id="CMIP6_xvelmean"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_vertical_mean_x_velocity : X-component of land ice vertical mean velocity -->
+   <field id="CMIP6_xvelsurf"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_surface_x_velocity : X-component of land ice surface velocity -->
+   <field id="CMIP6_yvelbase"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_basal_y_velocity : Y-component of land ice basal velocity -->
+   <field id="CMIP6_yvelmean"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_vertical_mean_y_velocity : Y-component of land ice vertical mean velocity -->
+   <field id="CMIP6_yvelsurf"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_surface_y_velocity : Y-component of land ice surface velocity -->
+   <field id="CMIP6_zvelbase"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_basal_upward_velocity : Upward-component of land ice basal velocity -->
+   <field id="CMIP6_zvelsurf"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_surface_upward_velocity : Upward component of land ice surface velocity -->
+</field_definition>
+</context>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_inca.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_inca.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_inca.xml	(revision 5893)
@@ -0,0 +1,125 @@
+<context id="inca">
+<field_definition>
+
+<field id="CMIP6_drybc"     field_ref="drybc"          />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_dry_deposition : Dry Deposition Rate of Black Carbon Aerosol Mass --> 
+<field id="CMIP6_drydust"   field_ref="drydust"        />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_dry_deposition : Dry Deposition Rate of Dust --> 
+<field id="CMIP6_drynh4"    field_ref="drynh4"         />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_dry_deposition : Dry Deposition Rate of NH4 --> 
+<field id="CMIP6_dryoa"     field_ref="dryoa"          />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_dry_deposition : Dry Deposition Rate of Dry Aerosol Total Organic Matter --> 
+<field id="CMIP6_dryso4"    field_ref="dryso4"         />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_dry_deposition : Dry Deposition Rate of SO4 --> 
+<field id="CMIP6_dryss"     field_ref="dryss"          />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_sea_salt_dry_aerosol_particles_due_to_dry_deposition : Dry Deposition Rate of Sea-Salt Aerosol --> 
+<field id="CMIP6_emidust"   field_ref="Emi_CIDUSTM"        />     <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Total Emission Rate of Dust --> 
+<field id="CMIP6_emioa"     field_ref="emioa"          />      <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : Primary Emission and Chemical Production of Dry Aerosol Organic Matter --> 
+<field id="CMIP6_emiso4"    field_ref="emiso4"         />     <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_emission : Total Direct Emission Rate of SO4 --> 
+<field id="CMIP6_emiss"     field_ref="emiss"          />     <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sea_salt_dry_aerosol_particles_due_to_emission : Total Emission Rate of Sea-Salt Aerosol --> 
+<field id="CMIP6_emibc"     field_ref="emibc"          />      <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission : Total Emission Rate of Black Carbon Aerosol Mass --> 
+<field id="CMIP6_mmraerh2o" field_ref="mmraerh2o"     />      <!-- P1 (kg kg-1) mass_fraction_of_water_in_ambient_aerosol_particles_in_air : Aerosol Water Mass Mixing Ratio --> 
+<field id="CMIP6_mmrdust"   field_ref="CIDUSTM"        /> <!-- P1 (kg kg-1) mass_fraction_of_dust_dry_aerosol_particles_in_air : Dust Aerosol Mass Mixing Ratio --> 
+<field id="CMIP6_mmrbc"     field_ref="mmrbc"          />       <!-- P1 (kg kg-1) mass_fraction_of_elemental_carbon_dry_aerosol_particles_in_air : Elemental Carbon Mass Mixing Ratio --> 
+<field id="CMIP6_mmrnh4"    field_ref="ASNH4M"       />  <!-- P1 (kg kg-1) mass_fraction_of_ammonium_dry_aerosol_particles_in_air : NH4 Mass Mixing Ratio --> 
+<field id="CMIP6_mmroa"     field_ref="mmroa"          />       <!-- P1 (kg kg-1) mass_fraction_of_particulate_organic_matter_dry_aerosol_particles_in_air : Total Organic Aerosol Mass Mixing Ratio --> 
+<field id="CMIP6_mmrsoa"    field_ref="mmrsoa"         />       <!-- P1 (kg kg-1) mass_fraction_of_secondary_particulate_organic_matter_dry_aerosol_particles_in_air : Secondary Organic Aerosol Mass Mixing Ratio --> 
+<field id="CMIP6_mmrso4"    field_ref="ASSO4M"         />      <!-- P1 (kg kg-1) mass_fraction_of_sulfate_dry_aerosol_particles_in_air : Aerosol Sulfate Mass Mixing Ratio --> 
+<field id="CMIP6_mmrss"     field_ref="mmrss"          />      <!-- P1 (kg kg-1) mass_fraction_of_sea_salt_dry_aerosol_particles_in_air : Sea-Salt Aerosol Mass Mixing Ratio --> 
+<field id="CMIP6_mmrno3"    field_ref="mmrno3"         />      <!-- P1 (kg kg-1) mass_fraction_of_nitrate_dry_aerosol_particles_in_air : NO3 Aerosol Mass Mixing Ratio --> 
+<field id="CMIP6_mmrpm10"  field_ref="mmrpm10"         />   <!-- P1 (kg kg-1) mass_fraction_of_pm10_dry_aerosol_particles_in_air : PM10 Mass Mixing Ratio --> 
+<field id="CMIP6_mmrpm1"  field_ref="mmrpm1"           />     <!-- P1 (kg kg-1) mass_fraction_of_pm1_dry_aerosol_particles_in_air : PM1 Mass Mixing Ratio --> 
+<field id="CMIP6_mmrpm2p5"  field_ref="mmrpm2p5"       />     <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_dry_aerosol_particles_in_air : PM2.5 Mass Mixing Ratio --> 
+<field id="CMIP6_wetbc"     field_ref="wetbc"          />      <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_wet_deposition : Wet Deposition Rate of Black Carbon Aerosol Mass --> 
+<field id="CMIP6_wetnh4"    field_ref="WET_ASNH4M"     />    <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_wet_deposition : Wet Deposition Rate of NH4 --> 
+<field id="CMIP6_wetoa"     field_ref="wetoa"          />    <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_wet_deposition : Wet Deposition Rate of Dry Aerosol Total Organic Matter --> 
+<field id="CMIP6_wetso4"    field_ref="WET_ASSO4M"     />     <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_wet_deposition : Wet Deposition Rate of SO4 --> 
+<field id="CMIP6_wetss"     field_ref="wetss"          />    <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_sea_salt_dry_aerosol_particles_due_to_wet_deposition : Wet Deposition Rate of Sea-Salt Aerosol --> 
+<field id="CMIP6_wetdust"   field_ref="WET_CIDUSTM"    /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_wet_deposition : Wet Deposition Rate of Dust --> 
+<field id="CMIP6_emibvoc"   field_ref="emibvoc"        />    <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_biogenic_nmvoc_expressed_as_carbon_due_to_emission : Total Emission Rate of Biogenic NMVOC --> 
+
+<field id="CMIP6_emilnox"   field_ref="prod_light_col" /> <!-- P1 (mol s-1) tendency_of_atmosphere_moles_of_nox_expressed_as_nitrogen : Layer-Integrated Lightning Production of NOx --> 
+<field id="CMIP6_emiaco"    field_ref="dummy_XXXX"     /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : Total Emission Rate of Anthropogenic CO --> 
+<field id="CMIP6_emianox"   field_ref="dummy_XXXX"     /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : Total Emission Rate of Anthropogenic NOx --> 
+<field id="CMIP6_emiaoa"    field_ref="dummy_XXXX"     /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : Total Emission Rate of Anthropogenic Organic Aerosol --> 
+<field id="CMIP6_emivoc"    field_ref="dummy_XXXX"     /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission : Total Emission Rate of NMVOC --> 
+<field id="CMIP6_nh50"      field_ref="dummy_XXXX"     /> <!-- P1 (mol mol-1) mole_fraction_of_artificial_tracer_with_fixed_lifetime_in_air : Artificial Tracer with 50 Day Lifetime --> 
+<field id="CMIP6_h2o"       field_ref="H2O"            /> <!-- P1 (1) mass_fraction_of_water_in_air : Mass Fraction of Water --> 
+<field id="CMIP6_toz"       field_ref="o3tot_col"      /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Total Column Ozone --> 
+<field id="CMIP6_tropoz"    field_ref="o3_col"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Tropospheric Ozone Column --> 
+<field id="CMIP6_c2h2"      field_ref="C2H2"           /> <!-- P1 (mol mol-1) mole_fraction_of_ethyne_in_air : C2H2 Volume Mixing Ratio --> 
+<field id="CMIP6_c2h6"      field_ref="C2H6"           /> <!-- P1 (mol mol-1) mole_fraction_of_ethane_in_air : C2H6 Volume Mixing Ratio --> 
+<field id="CMIP6_c3h6"      field_ref="C3H6"           /> <!-- P1 (mol mol-1) mole_fraction_of_propene_in_air : C3H6  volume mixing ratio --> 
+<field id="CMIP6_c3h8"      field_ref="C3H8"           /> <!-- P1 (mol mol-1) mole_fraction_of_propane_in_air : C3H8  volume mixing ratio --> 
+<field id="CMIP6_ch3coch3"  field_ref="CH3COCH3"       /> <!-- P1 (mol mol-1) mole_fraction_of_acetone_in_air : CH3COCH3  volume mixing ratio --> 
+<field id="CMIP6_ch4"       field_ref="CH4"            /> <!-- P1 (mol mol-1) mole_fraction_of_methane_in_air : Mole Fraction of CH4 --> 
+<field id="CMIP6_hcho"      field_ref="CH2O"           /> <!-- P1 (mol mol-1) mole_fraction_of_formaldehyde_in_air : Formaldehyde Volume Mixing Ratio --> 
+<field id="CMIP6_chegpso4"  field_ref="ASSO4M_p_so2oh_col"       />         <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_gaseous_phase_net_chemical_production : Gas-Phase Production Rate of SO4 --> 
+<field id="CMIP6_cheaqpso4" field_ref="cheaqpso4"      />     <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_aqueous_phase_net_chemical_production : Aqueous-Phase Production Rate of SO4 --> 
+<field id="CMIP6_chepsoa"   field_ref="chepsoa"        />     <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : Chemical Production of Dry Aerosol Secondary Organic Matter --> 
+<field id="CMIP6_chepasoa"  field_ref="ASAR_p_col"       />                                      <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : Total Net Production of Anthropogenic Secondary Organic Aerosol --> 
+<field id="CMIP6_co"        field_ref="CO"             /> <!-- P1 (mol mol-1) mole_fraction_of_carbon_monoxide_in_air : CO Volume Mixing Ratio --> 
+<field id="CMIP6_dms"       field_ref="DMS"            /> <!-- P1 (mol mol-1) mole_fraction_of_dimethyl_sulfide_in_air : Dimethyl Sulphide (DMS) Mole Fraction --> 
+<field id="CMIP6_dmso"      field_ref="DMSO"           /> <!-- P3 (mol m-3) mole_concentration_of_dimethyl_sulfide_in_sea_water : Mole Concentration of Dimethyl Sulphide in Sea Water --> 
+<field id="CMIP6_drynh3"    field_ref="Dflux_NH3"      /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_ammonia_due_to_dry_deposition : Dry Deposition Rate of NH3 --> 
+<field id="CMIP6_drynoy"    field_ref="Dry_NOY"        /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_dry_deposition : Dry Deposition Rate of NOy --> 
+<field id="CMIP6_dryo3"     field_ref="Dflux_O3"       /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition : Dry Deposition Rate of O3 --> 
+<field id="CMIP6_dryso2"    field_ref="Dflux_SO2"      /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_dry_deposition : Dry Deposition Rate of SO2 --> 
+<field id="CMIP6_emico"     field_ref="emico"          />      <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : Total Emission Rate of CO --> 
+<field id="CMIP6_emidms"    field_ref="Emi_DMS"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission : Total Emission Rate of DMS --> 
+<field id="CMIP6_emiisop"   field_ref="Emi_ISOP"       /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_isoprene_due_to_emission : Total Emission Rate of Isoprene --> 
+<field id="CMIP6_eminh3"    field_ref="eminh3"         />       <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission : Total Emission Rate of NH3 --> 
+<field id="CMIP6_eminox"    field_ref="eminox"         />       <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : Total Emission Rate of NOx --> 
+<field id="CMIP6_emiso2"    field_ref="emiso2"         />       <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission : Total Emission Rate of SO2 --> 
+<field id="CMIP6_hcl"       field_ref="HCl"            /> <!-- P1 (mol mol-1) mole_fraction_of_hydrogen_chloride_in_air : HCl Volume Mixing Ratio --> 
+<field id="CMIP6_hno3"      field_ref="HNO3"           /> <!-- P1 (mol mol-1) mole_fraction_of_nitric_acid_in_air : HNO3 Volume Mixing Ratio --> 
+<field id="CMIP6_ho2"       field_ref="HO2"            /> <!-- P1 (mol mol-1) mole_fraction_of_hydroperoxyl_radical_in_air : HO2 Volume Mixing Ratio --> 
+<field id="CMIP6_isop"      field_ref="ISOP"           /> <!-- P1 (mol mol-1) mole_fraction_of_isoprene_in_air : Isoprene Volume Mixing Ratio --> 
+<field id="CMIP6_lossco"    field_ref="CO_loss"         />      <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_carbon_monoxide_due_to_chemical_destruction : Monthly Loss of Atmospheric Carbon Monoxide --> 
+<field id="CMIP6_lossn2o"   field_ref="CH4_loss"        />      <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_nitrous_oxide_due_to_chemical_destruction : Monthly Loss of Atmospheric Nitrous Oxide --> 
+<field id="CMIP6_lossch4"   field_ref="N2O_loss"        />      <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_methane_due_to_chemical_destruction : Monthly Loss of Atmospheric Methane --> 
+<field id="CMIP6_n2o"       field_ref="N2O"            /> <!-- P1 (mol mol-1) mole_fraction_of_nitrous_oxide_in_air : Mole Fraction of N2O --> 
+<field id="CMIP6_no2"       field_ref="NO2"            /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 Volume Mixing Ratio --> 
+<field id="CMIP6_no"        field_ref="NO"             /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_monoxide_in_air : NO Volume Mixing Ratio --> 
+<field id="CMIP6_o3loss"    field_ref="O3_loss"         />       <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_destruction : O3 Destruction Rate --> 
+<field id="CMIP6_o3prod"    field_ref="O3_prod"         />      <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_production : O3 Production Rate --> 
+<field id="CMIP6_oh"        field_ref="OH"             /> <!-- P1 (mol mol-1) mole_fraction_of_hydroxyl_radical_in_air : OH Volume Mixing Ratio --> 
+<field id="CMIP6_o3"        field_ref="O3"             /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Mole Fraction of O3 --> 
+<field id="CMIP6_o3ste"     field_ref="O3S"            /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Stratospheric Ozone Tracer Volume Mixing Ratio --> 
+<field id="CMIP6_pan"       field_ref="PAN"            /> <!-- P1 (mol mol-1) mole_fraction_of_peroxyacetyl_nitrate_in_air : PAN Volume Mixing Ratio --> 
+<field id="CMIP6_ps"        field_ref="ps"             /> 
+<field id="CMIP6_so2"       field_ref="SO2"            /> <!-- P1 (mol mol-1) mole_fraction_of_sulfur_dioxide_in_air : SO2 Volume Mixing Ratio --> 
+<field id="CMIP6_wetnh3"    field_ref="WET_NH3"        /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_ammonia_due_to_wet_deposition : Wet Deposition Rate of NH3 --> 
+<field id="CMIP6_wetnoy"    field_ref="WET_NOY"        /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_wet_deposition : Wet Deposition Rate of NOy Including Aerosol Nitrate --> 
+<field id="CMIP6_wetso2"    field_ref="WET_SO2"        /> <!-- P1 (kg m-2 s-1) minus_tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_wet_deposition : Wet Deposition Rate of SO2 --> 
+<field id="CMIP6_jno2"      field_ref="phtrate_jNO2"   /> <!-- P1 (s-1) photolysis_rate_of_nitrogen_dioxide : Photolysis Rate of NO2 --> 
+<field id="CMIP6_photo1d"   field_ref="phtrate_jO3O1D" /> <!-- P1 (s-1) photolysis_rate_of_ozone_to_1D_oxygen_atom : Photolysis Rate of Ozone (O3) to Excited Atomic Oxygen (the Singlet D State, O1D) --> 
+<field id="CMIP6_noy"       field_ref="noy"            />     <!-- P1 (mol mol-1) mole_fraction_of_noy_expressed_as_nitrogen_in_air : Total Reactive Nitrogen Volume Mixing Ratio --> 
+<field id="CMIP6_bry"       field_ref="bry"            />       <!-- P1 (mol mol-1) mole_fraction_of_inorganic_bromine_in_air : Total Inorganic Bromine Volume Mixing Ratio --> 
+<field id="CMIP6_cly"       field_ref="cly"            />       <!-- P1 (mol mol-1) mole_fraction_of_inorganic_chlorine_in_air : Total Inorganic Chlorine Volume Mixing Ratio --> 
+<field id="CMIP6_od550bc"   field_ref="od550bc"        />      <!-- P1 (1) atmosphere_optical_thickness_due_to_black_carbon_ambient_aerosol : Black Carbon Optical Thickness at 550nm --> 
+<field id="CMIP6_od550dust" field_ref="OD550_CIDUSTM"  /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Dust Optical Thickness at 550nm --> 
+<field id="CMIP6_od550no3"  field_ref="od550no3"       />     <!-- P1 (1) atmosphere_optical_thickness_due_to_nitrate_ambient_aerosol_particles : Nitrate Aerosol Optical Depth at 550nm --> 
+<field id="CMIP6_od550oa"   field_ref="od550oa"        />     <!-- P1 (1) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol_particles : Total Organic Aerosol Optical Depth at 550nm --> 
+<field id="CMIP6_od550soa"  field_ref="od550soa"       />    <!-- P1 (1) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol_particles : Particulate Organic Aerosol Optical Depth at 550nm --> 
+<field id="CMIP6_od550so4"  field_ref="OD550_ASSO4M"       />        <!-- P1 (1) atmosphere_optical_thickness_due_to_sulfate_ambient_aerosol_particles : Sulfate Aerosol Optical Depth at 550nm --> 
+<field id="CMIP6_od550ss"   field_ref="od550ss"        />    <!-- P1 (1) atmosphere_optical_thickness_due_to_sea_salt_ambient_aerosol_particles : Sea-Salt Aerosol Optical Depth at 550nm --> 
+<field id="CMIP6_ptp"       field_ref="ptrop"          /> <!-- P1 (Pa) tropopause_air_pressure : Tropopause Air Pressure --> 
+<field id="CMIP6_ztp"       field_ref="ztrop"          /> <!-- P1 (m) tropopause_altitude : Tropopause Altitude Above Geoid --> 
+<field id="CMIP6_tatp"      field_ref="ttrop"          /> <!-- P1 (K) tropopause_air_temperature : Tropopause Air Temperature --> 
+<field id="CMIP6_phalf"     field_ref="pmid"           /> <!-- P1 (Pa) air_pressure : Pressure on Model Half-Levels --> 
+<field id="CMIP6_pfull"     field_ref="pfull"          /> <!-- P1 (Pa) air_pressure : Pressure at Model Full-Levels --> 
+<field id="CMIP6_ta"        field_ref="temp"           /> <!-- P1 (K) air_temperature : Air Temperature --> 
+
+<field id="CMIP6_sfo3max"   field_ref="dummy_XXXX"     /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Daily Maximum O3 Volume Mixing Ratio in Lowest Model Layer --> 
+<field id="CMIP6_sfo3"      field_ref="dummy_XXXX"     /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : O3 Volume Mixing Ratio in Lowest Model Layer --> 
+<field id="CMIP6_sfpm25"    field_ref="dummy_XXXX"     /> <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_ambient_aerosol_particles_in_air : PM2.5 Mass Mixing Ratio in Lowest Model Layer --> 
+<field id="CMIP6_sfno2"     field_ref="dummy_XXXX"     /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 Volume Mixing Ratio in Lowest Model Layer --> 
+
+<field id="CMIP6_ap" field_ref="Ahyb" /><!-- Ap hybrid coordinate array for level interfaces -->
+<field id="CMIP6_ap_bnds" field_ref="Ahyb_bounds" /><!-- Ap hybrid coordinate bounds -->
+<field id="CMIP6_b" field_ref="Bhyb" /><!-- Bp hybrid coordinate array for level interfaces -->
+<field id="CMIP6_b_bnds" field_ref="Bhyb_bounds" /><!-- Bp hybrid coordinate bounds -->
+<field id="CMIP6_ahp" field_ref="Ahyb_mid" /><!-- Aps hybrid coordinate array for mid-levels -->
+<field id="CMIP6_ahp_bnds" field_ref="Ahyb_mid_bounds" /><!-- Aps hybrid coordinate bounds -->
+<field id="CMIP6_bh" field_ref="Bhyb_mid" /><!-- Bps hybrid coordinate array for mid-levels -->
+<field id="CMIP6_bh_bnds" field_ref="Bhyb_mid_bounds" /><!-- Bps hybrid coordinate bounds -->
+
+
+
+</field_definition>
+</context>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_nemo.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_nemo.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_nemo.xml	(revision 5893)
@@ -0,0 +1,499 @@
+<context id="nemo">
+<field_definition>
+<field_group freq_op="_reset_" freq_offset="_reset_">
+<!-- for variables which realm equals one of _ocean-->
+   <field id="CMIP6_agessc"        field_ref="dummy_XYO"        />  <!-- P1 (yr) sea_water_age_since_surface_contact : Time elapsed since water was last in surface layer of the ocean. -->
+   <field id="CMIP6_areacello"     field_ref="areacello"        /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report ocean variables and variables which are requested as used on the model ocean grid (e.g. hfsso, which is a downward heat flux from the atmosphere interpolated onto the ocean grid). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_basin"         field_ref="dummy_XYO"           /> <!-- P1 (1) region : A variable with the standard name of region contains strings which indicate geographical regions. These strings must be chosen from the standard region list. -->
+	   <field id="CMIP6_bigthetao"     field_ref="toce" /> <!-- P1 (degC) sea_water_conservative_temperature : Diagnostic should be contributed only for models using conservative temperature as prognostic field. --> 
+   <field id="CMIP6_bigthetaoga"   field_ref="dummy_XYO"         /> <!-- P1 (degC) sea_water_conservative_temperature : Diagnostic should be contributed only for models using conservative temperature as prognostic field. -->
+   <field id="CMIP6_cfc11"         field_ref="dummy_XYO" />  <!-- P1 (mol m-3) mole_concentration_of_cfc11_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane. -->
+   <field id="CMIP6_cfc12"         field_ref="dummy_XYO" />  <!-- P1 (mol m-3) mole_concentration_of_cfc12_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane. -->
+   <field id="CMIP6_deptho"        field_ref="bathy"          /> <!-- P1 (m) sea_floor_depth_below_geoid : Ocean bathymetry.   Reported here is the sea floor depth for present day relative to z=0 geoid. Reported as missing for land grid cells. -->  
+   <field id="CMIP6_difmxybo"  field_ref="dummy_XYO"        /> <!-- P2 (m4 s-1) ocean_momentum_xy_biharmonic_diffusivity : Lateral biharmonic viscosity applied to the momentum equations. -->
+   <field id="CMIP6_difmxybo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_momentum_xy_biharmonic_diffusivity : Lateral biharmonic viscosity applied to the momentum equations. -->
+   <field id="CMIP6_difmxylo"  field_ref="dummy_XYO"        /> <!-- P2 (m2 s-1) ocean_momentum_xy_laplacian_diffusivity : Lateral Laplacian viscosity applied to the momentum equations. -->
+   <field id="CMIP6_difmxylo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m2 s-1) ocean_momentum_xy_laplacian_diffusivity : Lateral Laplacian viscosity applied to the momentum equations. -->
+   <field id="CMIP6_diftrbbo"      field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_bolus_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrbbo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_bolus_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrblo"      field_ref="dummy_XYO"        /> <!-- P1 (m2 s-1) ocean_tracer_bolus_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced advective transport. Sometimes this diffusivity is called the 'thickness' diffusivity. For CMIP5, this diagnostic was called 'ocean tracer bolus laplacian diffusivity'.  The CMIP6 name is physically more relevant. -->
+   <field id="CMIP6_diftrblo2d"    field_ref="aht2d_eiv"        /> <!-- P3 (m2 s-1) ocean_tracer_bolus_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced advective transport. Sometimes this diffusivity is called the 'thickness' diffusivity. For CMIP5, this diagnostic was called 'ocean tracer bolus laplacian diffusivity'.  The CMIP6 name is physically more relevant. -->
+   <field id="CMIP6_diftrebo"      field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_epineutral_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrebo2d"    field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_epineutral_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrelo"      field_ref="dummy_XYO"        /> <!-- P1 (m2 s-1) ocean_tracer_epineutral_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced diffusive transport oriented along neutral or isopycnal directions. Sometimes this diffusivity is called the neutral diffusivity or isopycnal diffusivity or Redi diffusivity. -->
+   <field id="CMIP6_diftrelo2d"    field_ref="aht2d_eiv"        /> <!-- P3 (m2 s-1) ocean_tracer_epineutral_laplacian_diffusivity : Ocean tracer diffusivity associated with parameterized eddy-induced diffusive transport oriented along neutral or isopycnal directions. Sometimes this diffusivity is called the neutral diffusivity or isopycnal diffusivity or Redi diffusivity. -->
+   <field id="CMIP6_diftrxybo"     field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_xy_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrxybo2d"   field_ref="dummy_XYO"        /> <!-- P3 (m4 s-1) ocean_tracer_xy_biharmonic_diffusivity : unset -->
+   <field id="CMIP6_diftrxylo"     field_ref="dummy_XYO"        /> <!-- P3 (m2 s-1) ocean_tracer_xy_laplacian_diffusivity : unset -->
+   <field id="CMIP6_diftrxylo2d"   field_ref="aht2d"            /> <!-- P3 (m2 s-1) ocean_tracer_xy_laplacian_diffusivity : unset -->
+   <field id="CMIP6_difvho"        field_ref="avt" /> <!-- P1 (m2 s-1) ocean_vertical_heat_diffusivity : Vertical/dianeutral diffusivity applied to prognostic temperature field. -->
+   <field id="NEMO_difvho_noevd"   field_ref="avt" > this - avt_evd </field> <!-- P3 (m2 s-1) ocean vertical heat diffusivity without evd contribution ****  NEMO-RD : extra variable not required by CMIP6 -->
+   <field id="CMIP6_difvmbo"       field_ref="dummy_XY0"             /> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity_due_to_background : unset **** NEMO-RD not relevant for IPSLCM6 because we use zdftmx_new (background included in av_tide) -->
+   <field id="CMIP6_difvmfdo"      field_ref="dummy_XYO"        /> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity_due_to_form_drag : unset **** NEMO-RD not relevant for IPSL CM6--> 
+   <field id="CMIP6_difvmo"        field_ref="avm" /> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity : unset -->
+   <field id="CMIP6_difvmto"       field_ref="dummy_XYO" /> <!-- P1 (m2 s-1) ocean_vertical_momentum_diffusivity_due_to_tides : unset --> 
+   <field id="CMIP6_difvso"        field_ref="avs" /> <!-- P1 (m2 s-1) ocean_vertical_salt_diffusivity : Vertical/dianeutral diffusivity applied to prognostic salinity field. -->
+   <field id="NEMO_difvso_noevd"   field_ref="avs"  > this - avt_evd </field>  <!-- P3 (m2 s-1) ocean vertical heat diffusivity without evd contribution ****  NEMO-RD : extra variable not required by CMIP6 -->
+   <field id="CMIP6_difvtrbo"      field_ref="dummy_XYO"             /> <!-- P1 (m2 s-1) ocean_vertical_tracer_diffusivity_due_to_background : unset *** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_difvtrto"      field_ref="dummy_XYO" /> <!-- P1 (m2 s-1) ocean_vertical_tracer_diffusivity_due_to_tides : unset -->
+   <field id="CMIP6_dispkevfo"     field_ref="dummy_XYO"   /> <!-- P1 (W m-2) ocean_kinetic_energy_dissipation_per_unit_area_due_to_vertical_friction. *** NEMO-RD : provides 2D (vertical integral) while not requested by CMIP6 (Griffies et al. 2016) while CMIP5 requested 3D field -->
+   <field id="CMIP6_dispkexyfo"    field_ref="dummy_XY0"        /> <!-- P3 (W m-2) ocean_kinetic_energy_dissipation_per_unit_area_due_to_xy_friction : Depth integrated impacts on kinetic energy arising from lateral frictional dissipation associated with Laplacian and/or biharmonic viscosity. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements. -->
+   <field id="CMIP6_dispkexyfo2d"  field_ref="dummy_XYO"        /> <!-- P3 (W m-2) ocean_kinetic_energy_dissipation_per_unit_area_due_to_xy_friction : Depth integrated impacts on kinetic energy arising from lateral frictional dissipation associated with Laplacian and/or biharmonic viscosity. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements. -->
+   <field id="CMIP6_evs"           field_ref="evap_ao_cea"    /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : computed as the total mass of water vapor evaporating from the ice-free portion of the ocean  divided by the area of the ocean portion of the grid cell.  -->
+   <field id="CMIP6_fgcfc11"       field_ref="dummy_XYO"         /> <!-- P2 (mol sec-1 m-2) surface_downward_mole_flux_of_cfc11 : gas exchange flux of CFC11 -->
+   <field id="CMIP6_fgcfc12"       field_ref="dummy_XYO"         /> <!-- P1 (mol sec-1 m-2) surface_downward_mole_flux_of_cfc12 : gas exchange flux of CFC12 -->
+   <field id="CMIP6_fgsf6"         field_ref="dummy_XYO"           /> <!-- P1 (mol sec-1 m-2) fgsf6 : gas exchange flux of SF6 -->
+   <field id="CMIP6_ficeberg"      field_ref="dummy_XYO"         /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_icebergs : computed as the iceberg melt water  flux into the ocean divided by the area of the ocean portion of the grid cell. *** NEMO-RD : does not do (output of vertical profile to be coded) -->
+   <field id="CMIP6_ficeberg2d"    field_ref="dummy_XYO"         /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_icebergs : computed as the iceberg melt water  flux into the ocean divided by the area of the ocean portion of the grid cell. **** NEMO-RD : TODO some work needed for forced mode to read iceberg contribution independently from river runoffs --> 
+   <field id="CMIP6_flandice"      field_ref="dummy_XYO"        /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_land_ice : Computed as the water flux into the ocean due to land ice (runoff water from surface and base of land ice or melt from base of ice shelf or vertical ice front) into the ocean divided by the area ocean portion of the grid cell --> 
+   <field id="CMIP6_friver"        field_ref="runoffs"  /><!-- P1 (kg m-2 s-1) water_flux_into_sea_water_from_rivers : computed as the river flux of water into the ocean divided by the area of the ocean portion of the grid cell.  -->
+   <field id="CMIP6_fsitherm"      field_ref="fmmflx"            /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_due_to_sea_ice_thermodynamics : computed as the sea ice thermodynamic water flux into the ocean divided by the area of the ocean portion of the grid cell. **** Duplication with SIMIP (siflfwbot + sndmassmelt)  but mail to Dirk Notz and Martin Jukes suggest to keep as it is. NEMO-RD : a more appropriate definition is : total freswhater flux into ocean due to sea ice and associated snow cover. -->
+   <field id="CMIP6_hcont300"      field_ref="hc300"            /> <!-- P1 (m K) hcont300 : Used in PMIP2 -->
+   <field id="CMIP6_hfbasin"       field_ref="dummy_XYO" /> <!-- P1 (W) northward_ocean_heat_transport : Contains contributions from all physical processes affecting the northward heat transport, including resolved advection, parameterized advection, lateral diffusion, etc. Diagnosed here as a function of latitude and basin.   Use Celsius for temperature scale. --> 
+   <field id="CMIP6_hfbasinpadv"   field_ref="dummy_XYO"/> <!-- P1 (W) hfbasinpadv : Contributions to heat transport from parameterized eddy-induced advective transport due to any subgrid advective process. Diagnosed here as a function of latitude and basin.  Use Celsius for temperature scale.  --> 
+   <field id="CMIP6_hfbasinpmadv"  field_ref="dummy_XYO"  /> <!-- P1 (W) hfbasinpmadv : Contributions to heat transport from parameterized mesoscale eddy-induced advective transport. Diagnosed here as a function of latitude and basin.  Use Celsius for temperature scale. NEMO-RD: same as previous line in our case: only GM  --> 
+   <field id="CMIP6_hfbasinpmdiff" field_ref="dummy_XYO"/> <!-- P1 (W) hfbasinpmdiff : Contributions to heat transport from parameterized mesoscale eddy-induced diffusive transport (i.e., neutral diffusion). Diagnosed here as a function of latitude and basin. **** NEMO-RD: not relevant for IPSLCM6 -->
+   <field id="CMIP6_hfbasinpsmadv" field_ref="dummy_XYO"/> <!-- P1 (W) hfbasinpsmadv : Contributions to heat transport from parameterized SUB!!mesoscale eddy-induced advective transport. Diagnosed here as a function of latitude and basin.  Use Celsius for temperature scale. **** NEMO-RD: not relevant for IPSLCM6-->
+   <field id="CMIP6_hfcorr"        field_ref="dummy_not_provided"         /> <!-- P0 (W m-2) heat_flux_correction : Heat Flux Correction **** NEMO-RD: not relevant for IPSLCM6 -->
+   <field id="CMIP6_hfds"          field_ref="dummy_not_provided"     /> <!-- P1 (W m-2) surface_downward_heat_flux_in_sea_water : This is the net flux of heat entering the liquid water column through its upper surface (excluding any "flux adjustment") . -->
+   <field id="CMIP6_hfevapds"      field_ref="hflx_evap_cea"    /> <!-- P1 (W m-2) temperature_flux_due_to_evaporation_expressed_as_heat_flux_out_of_sea_water : This is defined as "where ice_free_sea over sea" -->
+   <field id="CMIP6_hfgeou"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) upward_geothermal_heat_flux_at_sea_floor : Upward Geothermal Heat Flux at Sea Floor -->
+   <field id="CMIP6_hfibthermds"   field_ref="dummy_XY"        /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_iceberg_thermodynamics : Heat Flux into Sea Water due to Iceberg Thermodynamics **** NEMO-RD not relevant for IPSL CM6--> 
+   <field id="CMIP6_hfibthermds2d" field_ref="dummy_XY"     /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_iceberg_thermodynamics : Heat Flux into Sea Water due to Iceberg Thermodynamics -->
+   <field id="CMIP6_hflso"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_latent_heat_flux : This is defined as with the cell methods string: where ice_free_sea over sea **** NEMO-RD: does not provide -->
+   <field id="CMIP6_hfrainds"      field_ref="dummy_XY"    /> <!-- P1 (W m-2) temperature_flux_due_to_rainfall_expressed_as_heat_flux_into_sea_water : This is defined as "where ice_free_sea over sea"; i.e., the total flux (considered here) entering the ice-free portion of the grid cell divided by the area of the ocean portion of the grid cell.  All such heat fluxes are computed based on Celsius scale.-->
+   <field id="CMIP6_hfrunoffds"    field_ref="dummy_XYO"        /> <!-- P2 (W m-2) temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water : Temperature Flux due to Runoff Expressed as Heat Flux into Sea Water **** NEMO-RD: the 3D version is not relevant for IPSLCM6. -->
+   <field id="CMIP6_hfrunoffds2d"  field_ref="dummy_XYO"     /> <!-- P2 (W m-2) temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water : Temperature Flux due to Runoff Expressed as Heat Flux into Sea Water -->
+   <field id="CMIP6_hfsifrazil"    field_ref="dummy_XYO"        /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_freezing_of_frazil_ice : Heat Flux into Sea Water due to Frazil Ice Formation **** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_hfsifrazil2d"  field_ref="dummy_XYO"        /> <!-- P1 (W m-2) heat_flux_into_sea_water_due_to_freezing_of_frazil_ice : Heat Flux into Sea Water due to Frazil Ice Formation **** NEMO-RD : not relevant for IPSLCM6 -->  
+   <field id="CMIP6_hfsnthermds"   field_ref="dummy_XYO"        /> <!-- P2 (W m-2) heat_flux_into_sea_water_due_to_snow_thermodynamics : Heat Flux into Sea Water due to Snow Thermodynamics **** NEMO-RD: the 3D version is not relevant for IPSLCM6-->
+   <field id="CMIP6_hfsnthermds2d" field_ref="dummy_not_provided" /> <!-- P2 (W m-2) heat_flux_into_sea_water_due_to_snow_thermodynamics : Heat Flux into Sea Water due to Snow Thermodynamics -->  
+   <field id="CMIP6_hfsso"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_sensible_heat_flux : This is defined as "where ice_free_sea over sea" **** NEMO-RD: does not do --> 
+   <field id="CMIP6_hfx"           field_ref="dummy_XY"  /><!-- P1 (W) ocean_heat_x_transport : Contains all contributions to "x-ward" heat transport from resolved and parameterized processes.  Use Celsius for temperature scale.  -->
+   <field id="CMIP6_hfy"           field_ref="dummy_XY"  /><!-- P1 (W) ocean_heat_y_transport : Contains all contributions to "y-ward" heat transport from resolved and parameterized processes. Use Celsius for temperature scale.  -->
+   <field id="CMIP6_htovgyre"      field_ref="dummy_XY"  /> <!-- P1 (W) northward_ocean_heat_transport_due_to_gyre : From all advective mass transport processes, resolved and parameterized. -->
+   <field id="CMIP6_htovovrt"      field_ref="dummy_XY"  /> <!-- P1 (W) northward_ocean_heat_transport_due_to_overturning : From all advective mass transport processes, resolved and parameterized. -->
+   <field id="CMIP6_masscello"     field_ref="masscello"        /> <!-- P1 (kg m-2) sea_water_mass_per_unit_area : Tracer grid-cell mass per unit area used for computing tracer budgets. For Boussinesq models with static ocean grid cell thickness, masscello = rhozero*thickcello, where thickcello is static cell thickness and rhozero is constant Boussinesq reference density. More generally, masscello is time dependent and reported as part of Omon.  -->
+   <field id="CMIP6_masso"         field_ref="dummy_XY"          /> <!-- P1 (kg) sea_water_mass : Total mass of liquid seawater. For Boussinesq models, report this diagnostic as Boussinesq reference density times total volume. -->
+   <field id="CMIP6_mfo"           field_ref="dummy_XY"         /> <!-- P1 (kg s-1) sea_water_transport_across_line : Sea Water Transport -->
+   <field id="CMIP6_mlotst"        field_ref="mldr10_3"         /> <!-- P2 (m) ocean_mixed_layer_thickness_defined_by_sigma_t : Sigma T is potential density referenced to ocean surface. -->
+   <field id="CMIP6_mlotstmax"     field_ref="dummy_XY"      /> <!-- P1 (m) ocean_mixed_layer_thickness_defined_by_sigma_t : Sigma T is potential density referenced to ocean surface. -->
+   <field id="CMIP6_mlotstmin"     field_ref="dummy_XY"      /> <!-- P1 (m) ocean_mixed_layer_thickness_defined_by_sigma_t : Sigma T is potential density referenced to ocean surface. -->
+   <field id="CMIP6_mlotstsq"      field_ref="mldr10_3" > this * this </field> <!-- P1 (m2) square_of_ocean_mixed_layer_thickness_defined_by_sigma_t : Square of Ocean Mixed Layer Thickness Defined by Sigma T -->
+   <field id="CMIP6_msftbarot"     field_ref="dummy_XY" /> <!-- P1 (kg s-1) ocean_barotropic_mass_streamfunction : Streamfunction or its approximation for free surface models. See OMDP document for details. -->
+   <field id="CMIP6_msftmrho"      field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) ocean_meridional_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. **** NEMO-RD does not do: no interpolation from y to meridional -->
+   <field id="CMIP6_msftmrhompa"   field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) msftmrhompa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD does not do: no interpolation from y to meridional--> 
+   <field id="CMIP6_msftmz"       field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) ocean_meridional_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. **** NEMO-RD does not do: no interpolation from y to meridional -->
+   <field id="CMIP6_msftmzmpa"     field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) msftmzmpa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD does not do: no interpolation from y to meridional--> 
+   <field id="CMIP6_msftmzsmpa"    field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) msftmzsmpa : Report only if there is a submesoscale eddy parameterization. **** NEMO-RD: not relevant for IPSL CM6-->
+   <field id="CMIP6_msftyrho"      field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) ocean_y_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. **** NEMO-RD: msf on density space not coded online. Ongoing work to code offline. BUt a priori, not distributed here. --> 
+   <field id="CMIP6_msftyrhompa"   field_ref="dummy_basin_merid_section_density"/> <!-- P1 (kg s-1) msftyrhompa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD: msf on density space not coded online. Ongoing work to code offline. BUt a priori, not distributed here.-->
+   <field id="CMIP6_msftyz"        field_ref="dummy_XY" /> <!-- P1 (kg s-1) ocean_y_overturning_mass_streamfunction : Overturning mass streamfunction arising from all advective mass transport processes, resolved and parameterized. --> 
+   <field id="CMIP6_msftyzmpa"     field_ref="dummy_basin_merid_section"        /> <!-- P1 (kg s-1) msftyzmpa : CMIP5 called this "due to Bolus Advection".  Name change respects the more general physics of the mesoscale parameterizations. **** NEMO-RD: Does not code --> 
+   <field id="CMIP6_msftyzsmpa"    field_ref="dummy_basin_merid_section"         /> <!-- P1 (kg s-1) msftyzsmpa : Report only if there is a submesoscale eddy parameterization. **** NEMO-RD: not relevant for IPSL CM6-->
+   <field id="CMIP6_obvfsq"        field_ref="dummy_not_provided" /> <!-- P1 (s-2) obvfsq : Square of Brunt Vaisala Frequency in Sea Water -->
+   <field id="CMIP6_ocontempdiff"  field_ref="dummy_XY" /> <!-- P1 (W m-2) ocontempdiff : Tendency of heat content for a grid cell from parameterized dianeutral mixing. Reported only for models that use conservative temperature as prognostic field. -->
+   <field id="CMIP6_ocontempmint"  field_ref="dummy_XY"         /> <!-- P3 (degC kg m-2) ocontempmint : Full column sum of density*cell thickness*conservative temperature. If the model is Boussinesq, then use Boussinesq reference density for the density factor. NEMO-RD: exactly same as tomint hence we leave dummy_XY here -->
+   <field id="CMIP6_ocontemppadvect" field_ref="dummy_XY" /> <!-- P1 (W m-2) ocontemppadvect : Tendency of heat content for a grid cell from parameterized eddy advection (any form of eddy advection). Reported only for models that use conservative temperature as prognostic field. -->
+   <field id="CMIP6_ocontemppmdiff" field_ref="dummy_XY" />  <!-- P1 (W m-2) ocontemppmdiff : Tendency of heat content for a grid cell from parameterized mesoscale eddy diffusion. Reported only for models that use conservative temperature as prognostic field. -->
+   <field id="CMIP6_ocontemppsmadvect" field_ref="dummy_XYO"    /> <!-- P1 (W m-2) ocontemppsmadvect : Tendency of heat content for a grid cell from parameterized submesoscale eddy advection. Reported only for models that use conservative temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6-->
+   <field id="CMIP6_ocontemprmadvect" field_ref="dummy_XY" /> <!-- P1 (W m-2) ocontemprmadvect : Tendency of Sea Water Conservative Temperature Expressed as Heat Content due to Residual Mean Advection  -->
+   <field id="CMIP6_ocontemptend"  field_ref="dummy_XY" /> <!-- P1 (W m-2) ocontemptend : Tendency of heat content for a grid cell from all processes. Reported only for models that use conservative temperature as prognostic field.  -->
+   <field id="CMIP6_omldamax"      field_ref="mldkz5"           /> <!-- P1 (m) ocean_mixed_layer_thickness_defined_by_mixing_scheme : unset -->
+   <field id="CMIP6_opottempdiff"  field_ref="dummy_XYO"        /> <!-- P1 (W m-2) opottempdiff : Tendency of heat content for a grid cell from parameterized dianeutral mixing. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6-->
+   <field id="CMIP6_opottempmint"  field_ref="dummy_XY"         /> <!-- P1 (degC kg m-2) opottempmint : __unset__ **** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_opottemppadvect" field_ref="dummy_XYO"      /> <!-- P1 (W m-2) opottemppadvect : Tendency of heat content for a grid cell from parameterized eddy advection (any form of eddy advection). Reported only for models that use potential temperature as prognostic field. **** NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_opottemppmdiff" field_ref="dummy_XYO"       /> <!-- P1 (W m-2) opottemppmdiff : Tendency of heat content for a grid cell from parameterized mesoscale eddy diffusion. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6 -->
+   <field id="CMIP6_opottemppsmadvect" field_ref="dummy_XYO"    /> <!-- P1 (W m-2) opottemppsmadvect : Tendency of heat content for a grid cell from parameterized submesoscale eddy advection. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6 -->
+   <field id="CMIP6_opottemprmadvect" field_ref="dummy_XYO"     /> <!-- P1 (W m-2) opottemprmadvect : Tendency of Sea Eater Potential Temperature Expressed as Heat Content due to Residual Mean Advection **** NEMO-RD not relevant for IPSL CM6 -->
+   <field id="CMIP6_opottemptend"  field_ref="dummy_XYO"        /> <!-- P1 (W m-2) opottemptend : Tendency of heat content for a grid cell from all processes. Reported only for models that use potential temperature as prognostic field. **** NEMO-RD not relevant for IPSL CM6-->
+   <field id="CMIP6_osaltdiff"     field_ref="dummy_XY"  /> <!-- P1 (kg m-2 s-1) osaltdiff : Tendency of salt content for a grid cell from parameterized dianeutral mixing.-->
+   <field id="CMIP6_osaltpadvect"  field_ref="dummy_XY"  /> <!-- P1 (kg m-2 s-1) osaltpadvect : Tendency of salt content for a grid cell from parameterized eddy advection (any form of eddy advection). -->
+   <field id="CMIP6_osaltpmdiff"   field_ref="dummy_XY"  /> <!-- P1 (kg m-2 s-1) osaltpmdiff : Tendency of salt content for a grid cell from parameterized mesoscale eddy diffusion. -->
+   <field id="CMIP6_osaltpsmadvect" field_ref="dummy_XYO"       /> <!-- P1 (kg m-2 s-1) osaltpsmadvect : Tendency of salt content for a grid cell from parameterized submesoscale eddy advection. **** NEMO-RD: not relevant for IPSL CM6--> 
+   <field id="CMIP6_osaltrmadvect" field_ref="dummy_XY"  /> <!-- P1 (kg m-2 s-1) osaltrmadvect : Tendency of Sea Water Salinity Expressed as Salt Content due to Residual Mean Advection -->
+   <field id="CMIP6_osalttend"     field_ref="dummy_XY" /> <!-- P1 (kg m-2 s-1) osalttend : Tendency of salt content for a grid cell from all processes. -->
+   <field id="CMIP6_pabigthetao"   field_ref="dummy_XYO"        /> <!-- P1 (degC) pabigthetao : Sea Water Added Conservative Temperature **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_pathetao"      field_ref="dummy_XYO"        /> <!-- P1 (degC) pathetao : __unset__ **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_pbo"           field_ref="botpres"> this * 1e4     </field> <!-- P1 (Pa) sea_water_pressure_at_sea_floor : Sea Water Pressure at Sea floor  --> 
+   <field id="CMIP6_prbigthetao"   field_ref="dummy_XYO"        /> <!-- P1 (degC) prbigthetao : Sea Water Redistributed Conservative Temperature **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_prthetao"      field_ref="dummy_XYO"        /> <!-- P1 (degC) prthetao : __unset__ **** NEMO-RD: ?? variable undefined in Griffies >> waiting for next DR -->
+   <field id="CMIP6_prw18O"        field_ref="dummy_XYO"        /> <!-- P1 (kg m-2) mass_content_of_water_vapor_containing_18O_in_atmosphere_layer : Ratio of abundance of oxygen-18 (18O) atoms to oxgen-16 (16O) atoms in sea water -->
+   <field id="CMIP6_pso"           field_ref="dummy_XY"         /> <!-- P1 (Pa) sea_water_pressure_at_sea_water_surface : Sea Water Pressure at Sea Water Surface **** NEMO-RD: not relevant for IPSLCM6 -->
+   <field id="CMIP6_rlntds"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : This is defined as "where ice_free_sea over sea" **** NEMO-RD: does not do -->
+   <field id="CMIP6_rsdo"          field_ref="dummy_XY" />  <!-- P1 (W m-2) downwelling_shortwave_flux_in_sea_water : Downwelling Shortwave Radiation in Sea Water -->
+   <field id="CMIP6_rsdoabsorb"    field_ref="dummy_XYO"        /> <!-- P2 (W m-2) net_rate_of_absorption_of_shortwave_energy_in_ocean_layer : Net Rate of Absorption of Shortwave Energy in Ocean Layer **** NEMO-RD: does not do : easy to compute offline -->
+   <field id="CMIP6_rsntds"        field_ref="qsr"              /> <!-- P1 (W m-2) net_downward_shortwave_flux_at_sea_water_surface : This is the flux into the surface of liquid sea water only. This excludes shortwave flux absorbed by sea ice, but includes any light that passes through the ice and is absorbed by the ocean. -->
+  <field id="CMIP6_sf6"            field_ref="dummy_XY"  />  <!-- P1 (mol m-3) mole_concentration_of_sulfur_hexafluoride_in_sea_water : Moles Per Unit Mass of SF6 in sea water **** NEMO-RD: does not do -->
+   <field id="CMIP6_sfdsi"         field_ref="saltflx" > this * $convSpsu </field> <!-- P1 (kg m-2 s-1) downward_sea_ice_basal_salt_flux : This field is physical, and it arises since sea ice has a nonzero salt content, so it exchanges salt with the liquid ocean upon melting and freezing. -->
+   <field id="CMIP6_sfriver"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) salt_flux_into_sea_water_from_rivers : This field is physical, and it arises when rivers carry a nonzero salt content.  Often this is zero, with rivers assumed to be fresh. NEMO-RD : not relevant for IPSLCM6 -->
+   <field id="CMIP6_sftof"         field_ref="dummy_XY" /> <!-- P1 (%) sea_area_fraction : This is the area fraction at the ocean surface. **** NEMO-RD: variable already provided in ping_seaIce under name siconc - we decide to keep it here as well -->
+   <field id="CMIP6_sltbasin"      field_ref="dummy_XY" /> <!-- P1 (kg s-1) northward_ocean_salt_transport : function of latitude, basin **** NEMO-RD: requested is as a function of latitude. In principle, we do not want to translate y into latitude. to be written in meta data -->
+	   <field id="CMIP6_sltnortha"     field_ref="dummy_XY" /> <!-- P1 (kg s-1) northward_ocean_salt_transport : unset -->
+   <field id="CMIP6_sltovgyre"     field_ref="dummy_XY"  /> <!-- P1 (kg s-1) northward_ocean_salt_transport_due_to_gyre : From all advective mass transport processes, resolved and parameterized. **** NEMO-RD: requested is as a function of latitude. In principle, we do not want to translate y into. latitude. to be written in meta data --> 
+	   <field id="CMIP6_sltovovrt"     field_ref="dummy_XY"  /> <!-- P1 (kg s-1) northward_ocean_salt_transport_due_to_overturning : From all advective mass transport processes, resolved and parameterized. **** NEMO-RD: requested is as a function of latitude. In principle, we do not want to translate y into latitude. to be writtent in meta data --> 
+   <field id="CMIP6_so"            field_ref="soce" > this * $convSpsu  </field> <!-- P1 (0.001) sea_water_salinity : Sea Water Salinity -->
+   <field id="CMIP6_sob"           field_ref="dummy_XY" />  <!-- P1 (0.001) sob : Model prognostic salinity at bottom-most model grid cell -->
+   <field id="CMIP6_soga"          field_ref="dummy_XY"  /> <!-- P1 (0.001) sea_water_salinity : Global Mean Sea Water Salinity -->
+   <field id="CMIP6_somint"        field_ref="dummy_XY" />  <!-- P1 (1e-3 kg m-2) somint : Full column sum of density*cell thickness*prognostic salinity. If the model is Boussinesq, then use Boussinesq reference density for the density factor. -->
+   <field id="CMIP6_sos"           field_ref="sss"  > this * $convSpsu </field> <!-- P1 (0.001) sea_surface_salinity : Sea Surface Salinity -->
+   <field id="CMIP6_sosga"         field_ref="dummy_XY" > this * $convSpsu </field>  <!-- P1 (0.001) sea_surface_salinity : Global Average Sea Surface Salinity -->
+   <field id="CMIP6_sossq"         field_ref="sss2" > this * $convSpsu * $convSpsu  </field> <!-- P3 (1e-06) sossq : Square of Sea Surface Salinity --> 
+   <field id="CMIP6_sw18O"         field_ref="dummy_XYA"        /> <!-- P1 (1) isotope_ratio_of_17O_to_16O_in_sea_water_excluding_solutes_and_solids : Ratio of abundance of oxygen-17 (17O) atoms to oxgen-16 (16O) atoms in sea water -->
+   <field id="CMIP6_sw2H"          field_ref="dummy_XYO"        /> <!-- P1 (1)  : Ratio of abundance of hydrogen-2 (2H) atoms to hydrogen-1 (1H) atoms in sea water -->
+   <field id="CMIP6_t20d"      field_ref="20d"         /> <!-- P1 (m) depth_of_isosurface_of_sea_water_potential_temperature : unset -->
+   <field id="CMIP6_tauucorr"      field_ref="dummy_FAFMIP"         /> <!-- P1 (N m-2) surface_downward_x_stress_correction : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc.  *** NEMO-RD : TODO for FAFMIP experiments ??? -->
+   <field id="CMIP6_tauuo"         field_ref="utau"             /> <!-- P1 (N m-2) surface_downward_x_stress : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc. -->
+   <field id="CMIP6_tauvcorr"      field_ref="dummy_FAFMIP"         /> <!-- P1 (N m-2) surface_downward_y_stress_correction : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc.*** NEMO-RD : TODO for FAFMIP experiments ???-->
+   <field id="CMIP6_tauvo"         field_ref="vtau"             /> <!-- P1 (N m-2) surface_downward_y_stress : This is the stress on the liquid ocean from overlying atmosphere, sea ice, ice shelf, etc. -->
+   <field id="CMIP6_thetao"        field_ref="toce" />  <!-- P1 (degC) sea_water_potential_temperature : Diagnostic should be contributed even for models using conservative temperature as prognostic field. -->
+   <field id="CMIP6_thetaoga"      field_ref="dummy_XYO"      /> <!-- P1 (degC) sea_water_potential_temperature : Diagnostic should be contributed even for models using conservative temperature as prognostic field -->
+   <field id="CMIP6_thetaot"       field_ref="dummy_XYO"   /> <!-- P1 (degC) sea_water_potential_temperature : Vertical average of the sea water potential temperature through the whole ocean depth -->
+   <field id="CMIP6_thetaot2000"   field_ref="dummy_XYO"         /> <!-- P1 (degC) sea_water_potential_temperature : Upper 2000m, 2D field -->
+   <field id="CMIP6_thetaot300"    field_ref="dummy_XYO"         /> <!-- P1 (degC) sea_water_potential_temperature : Upper 300m, 2D field -->
+   <field id="CMIP6_thetaot700"    field_ref="dummy_XYO"         /> <!-- P1 (degC) sea_water_potential_temperature : Upper 700m, 2D field -->
+   <field id="CMIP6_thkcello"  field_ref="e3t"        /> <!-- P1 (m) cell_thickness : Ocean Model Cell Thickness -->
+   <field id="CMIP6_tnkebto"   field_ref="dummy_XYO"        /> <!-- P2 (W m-2) tendency_of_ocean_eddy_kinetic_energy_content_due_to_bolus_transport : Depth integrated impacts on kinetic energy arising from parameterized eddy-induced advection. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements. -->
+   <field id="CMIP6_tnkebto2d"     field_ref="dummy_XYO"        /> <!-- P3 (W m-2) tendency_of_ocean_eddy_kinetic_energy_content_due_to_bolus_transport : Depth integrated impacts on kinetic energy arising from parameterized eddy-induced advection. For CMIP5, this diagnostic was 3d, whereas the CMIP6 depth integrated diagnostic is sufficient for many purposes and reduces archive requirements.  -->
+   <field id="CMIP6_tnpeo"         field_ref="dummy_XYO"        /> <!-- P1 (W m-2) tendency_of_ocean_potential_energy_content : Rate that work is done against vertical stratification, as measured by the vertical heat and salt diffusivity. Report here as depth integrated two-dimensional field. -->
+   <field id="CMIP6_tnpeot"        field_ref="dummy_XYO"        /> <!-- P1 (W m-2) tendency_of_ocean_potential_energy_content_due_to_tides : unset -->
+   <field id="CMIP6_tnpeotb"       field_ref="dummy_XYO"        /> <!-- P1 (W m-2) tendency_of_ocean_potential_energy_content_due_to_background : unset -->
+   <field id="CMIP6_tob"           field_ref="dummy_XYO" /> <!-- P1 (degC) sea_water_potential_temperature_at_sea_floor : Potential temperature at the ocean bottom-most grid cell.  -->
+   <field id="NEMO_tomint"        field_ref="dummy_XYO"           /> <!-- P2 (1e-3 kg m-2) tomint : Full column sum of density*cell thickness*prognostic temperature. If the model is Boussinesq, then use Boussinesq reference density for the density factor. *** NEMO-RD assumes this is potential temperature + provides with units Â°C kg m-2-->
+   <field id="CMIP6_tos"           field_ref="sst"              /> <!-- P1 (degC) sea_surface_temperature : temperature of liquid ocean.  Note that the correct standard_name for this variable is "sea_surface_temperature", not "surface_temperature", but this was discovered too late to correct.  To maintain consistency across CMIP5 models, the wrong standard_name will continue to be used. **** NEMO-RD: TODO : JM: is this really requested in K? This does not agree with the .xls document. To be clarified. In NEMO, sst given in Celsius -->
+   <field id="CMIP6_tosga"         field_ref="dummy_XYO"           /> <!-- P1 (degC) sea_surface_temperature : This may differ from "surface temperature" in regions of sea ice.This may differ from "surface temperature" in regions of sea ice.For models using conservative temperature as prognostic field, they should report the SST as surface potent -->
+   <field id="CMIP6_tossq"         field_ref="sst2"             /> <!-- P1 (degC2) square_of_sea_surface_temperature : square of temperature of liquid ocean, averaged over the day.  -->  
+   <field id="CMIP6_ugrid"         field_ref="dummy_XY"         /> <!-- P1 () longitude : Provide for models with unstructured grids only -->
+   <field id="CMIP6_umo"           field_ref="uocetr_eff" > this * $rau0 </field> <!-- P1 (kg s-1) ocean_mass_x_transport : X-ward mass transport from resolved and parameterized advective transport. -->
+   <field id="CMIP6_uo"            field_ref="uoce" /> <!-- P1 (m s-1) sea_water_x_velocity : Prognostic x-ward velocity component resolved by the model. -->
+   <field id="CMIP6_vmo"           field_ref="vocetr_eff"  > this * $rau0 </field> <!-- P1 (kg s-1) ocean_mass_y_transport : Y-ward mass transport from resolved and parameterized advective transport. -->
+   <field id="CMIP6_vo"            field_ref="voce" /> <!-- P1 (m s-1) sea_water_y_velocity : Prognostic x-ward velocity component resolved by the model. -->
+   <field id="CMIP6_volcello"      field_ref="dummy_XYO"        /> <!-- P1 (m3) ocean_volume : grid-cell volume ca. 2000. **** NEMO-RD does not do: not requested by OMIP and ambiguous definition -->
+   <field id="CMIP6_volo"          field_ref="dummy_XYO"           /> <!-- P1 (m3) sea_water_volume : Total volume of liquid seawater. -->
+   <field id="CMIP6_vsf"           field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water : It is set to zero in models which receive a real water flux. -->
+   <field id="CMIP6_vsfcorr"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_correction : It is set to zero in models which receive a real water flux. -->
+   <field id="CMIP6_vsfevap"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water_due_to_evaporation : zero for models using real water fluxes. -->
+   <field id="CMIP6_vsfpr"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water_due_to_rainfall : zero for models using real water fluxes. -->
+   <field id="CMIP6_vsfriver"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) virtual_salt_flux_into_sea_water_from_rivers : zero for models using real water fluxes. -->
+   <field id="CMIP6_vsfsit"        field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) virtual_salt_flux_into_sea_water_due_to_sea_ice_thermodynamics : This variable measures the virtual salt flux into sea water due to the melting of sea ice. It is set to zero in models which receive a real water flux. -->
+   <field id="CMIP6_wfcorr"        field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) water_flux_correction : Positive flux implies correction adds water to ocean. -->
+   <field id="CMIP6_wfo"           field_ref="empmr" /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water : computed as the water  flux into the ocean divided by the area of the ocean portion of the grid cell.  This is the sum of the next two variables in this table.  -->
+   <field id="CMIP6_wfonocorr"     field_ref="dummy_not_provided"  /> <!-- P1 (kg m-2 s-1) water_flux_into_sea_water_without_flux_correction : computed as the water  flux (without flux correction) into the ocean divided by the area of the ocean portion of the grid cell. *** NEMO-RD : TODO in field_ocean, empmr is defined as water flux out of sea ice and sea water. Is sea ice really taken into here? If no, correct description in field. If yes, this input is wrong here. -->
+   <field id="CMIP6_wmo"           field_ref="wocetr_eff" > this * $rau0 </field> <!-- P1 (kg s-1) upward_ocean_mass_transport : Upward mass transport from resolved and parameterized advective transport. -->
+   <field id="CMIP6_wo"            field_ref="woce"  /> <!-- P1 (m s-1) upward_sea_water_velocity : Sea Water Vertical Velocity -->
+   <field id="CMIP6_zfullo"    field_ref="dummy_XYO"        /> <!-- P1 (m) depth_below_geoid : Depth below geoid -->
+   <field id="CMIP6_zhalfo"    field_ref="dummy_XYO"        /> <!-- P1 (m) depth_below_geoid : Depth below geoid -->
+   <field id="CMIP6_zos"           field_ref="dummy_XYO"             /> <!-- P1 (m) sea_surface_height_above_geoid : This is the dynamic sea level, so should have zero global area mean. It should not include inverse barometer depressions from sea ice. -->
+   <field id="CMIP6_zossq"         field_ref="dummy_XYO"         /> <!-- P1 (m2) square_of_sea_surface_height_above_geoid : Surface ocean geoid defines z=0. -->
+   <field id="CMIP6_zostoga"       field_ref="dummy_XYO" />       <!-- P1 (m) global_average_thermosteric_sea_level_change : There is no CMIP6 request for zosga nor zossga. -->
+
+ <!-- for variables which realm equals one of _seaIce-->
+   <field id="CMIP6_siage"         field_ref="dummy_XY"            /> <!-- P1 (s) age_of_sea_ice : Age of sea ice -->
+   <field id="CMIP6_siareaacrossline" field_ref="dummy_XY"        /> <!-- P2 (m2 s-1) siareaacrossline : net (sum of transport in all directions) sea ice area transport through the following four passages, positive into the Arctic Ocean 1. Fram Strait = (11.5W,81.3N to (10.5E,79.6N) 2. Canadian Archipelego = (128.2W,70.6N) to (59.3W,82.1N) 3. Barents opening = (16.8E,76.5N) to (19.2E,70.2N) 4. Bering Strait = (171W,66.2N) to (166W,65N) -->
+   <field id="CMIP6_siarean"       field_ref="dummy_XY" />     <!-- P2 (1e6 km2) sea_ice_area : total area of sea ice in the Northern hemisphere -->
+   <field id="CMIP6_siareas"       field_ref="dummy_XY" />     <!-- P2 (1e6 km2) sea_ice_area : total area of sea ice in the Southern hemisphere -->
+   <field id="CMIP6_sicompstren"   field_ref="dummy_not_provided"      /> <!-- P2 (N m-1) compressive_strength_of_sea_ice : Computed strength of the ice pack, defined as the energy (J m-2) dissipated per unit area removed from the ice pack under compression, and assumed proportional to the change in potential energy caused by ridging. For Hibler-type models, this is P (= P*hexp(-C(1-A))) -->
+   <field id="CMIP6_siconc"        field_ref="iiceconc"   > iiceconc*100 </field> <!-- P1 (%) sea_ice_area_fraction : Area fraction of grid cell covered by sea ice -->
+   <field id="CMIP6_siconca"       field_ref="dummy_XY"         /> <!-- P1 (%) sea_ice_area_fraction : Area fraction of grid cell covered by sea ice -->
+   <field id="CMIP6_sidconcdyn"    field_ref="dummy_XY"       /> <!-- P2 (s-1) tendency_of_sea_ice_area_fraction_due_to_dynamics : Total change in sea-ice area fraction through dynamics-related processes (advection, divergence...) -->
+   <field id="CMIP6_sidconcth"     field_ref="dummy_XY"        /> <!-- P2 (s-1) tendency_of_sea_ice_area_fraction_due_to_thermodynamics : Total change in sea-ice area fraction through thermodynamic processes -->
+   <field id="CMIP6_sidivvel"      field_ref="dummy_XY"         /> <!-- P2 (s-1) divergence_of_sea_ice_velocity : Divergence of sea-ice velocity field (first shear strain invariant) -->
+   <field id="CMIP6_sidmassdyn"    field_ref="dummy_XY"       /> <!-- P2 (kg m-2 s-1) sidmassdyn : Total change in sea-ice mass through dynamics-related processes (advection,...) divided by grid-cell area -->
+   <field id="CMIP6_sidmassevapsubl" field_ref="dummy_XY"  /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : The rate of change of sea-ice mass change through evaporation and sublimation divided by grid-cell area -->
+   <field id="CMIP6_sidmassgrowthbot" field_ref="dummy_XY" /> <!-- P2 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_congelation_ice_accumulation : The rate of change of sea ice mass due to vertical growth of existing sea ice at its base divided by grid-cell area. -->
+   <field id="CMIP6_sidmassgrowthwat" field_ref="dummy_XY" /> <!-- P2 (kg m-2 s-1) sidmassgrowthwat : The rate of change of sea ice mass due to sea ice formation in supercooled water (often through frazil formation) divided by grid-cell area. Together, sidmassgrowthwat and sidmassgrowthbot should give total ice growth -->
+   <field id="CMIP6_sidmasslat"    field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) sidmasslat : The rate of change of sea ice mass through lateral melting divided by grid-cell area (report 0 if not explicitly calculated thermodynamically) -->
+   <field id="CMIP6_sidmassmeltbot" field_ref="dummy_XY"   /> <!-- P1 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_basal_melting : The rate of change of sea ice mass through melting at the ice bottom divided by grid-cell area -->
+   <field id="CMIP6_sidmassmelttop" field_ref="dummy_XY"   /> <!-- P1 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_surface_melting : The rate of change of sea ice mass through melting at the ice surface divided by grid-cell area -->
+   <field id="CMIP6_sidmasssi"     field_ref="dummy_XY"        /> <!-- P2 (kg m-2 s-1) tendency_of_sea_ice_amount_due_to_snow_conversion : The rate of change of sea ice mass due to transformation of snow to sea ice divided by grid-cell area -->
+   <field id="CMIP6_sidmassth"     field_ref="dummy_XY"        /> <!-- P2 (kg m-2 s-1) sidmassth : Total change in sea-ice mass from thermodynamic processes divided by grid-cell area -->
+   <field id="CMIP6_sidmasstranx"  field_ref="dummy_XY"     /> <!-- P2 (kg s-1) sea_ice_x_transport : Includes transport of both sea ice and snow by advection -->
+   <field id="CMIP6_sidmasstrany"  field_ref="dummy_XY"     /> <!-- P2 (kg s-1) sea_ice_y_transport : Includes transport of both sea ice and snow by advection -->
+   <field id="CMIP6_sidragbot"     field_ref="dummy_XY"         /> <!-- P3 (1.0) sidragbot : Oceanic drag coefficient that is used to calculate the oceanic momentum drag on sea ice -->
+   <field id="CMIP6_sidragtop"     field_ref="dummy_XY"         /> <!-- P3 (1.0) surface_drag_coefficient_for_momentum_in_air : Atmospheric drag coefficient that is used to calculate the atmospheric momentum drag on sea ice -->
+   <field id="CMIP6_siextentn"     field_ref="dummy_XY"  />   <!-- P2 (1e6 km2) sea_ice_extent : Total area of all Northern-Hemisphere grid cells that are covered by at least 15 % areal fraction of sea ice -->
+   <field id="CMIP6_siextents"     field_ref="dummy_XY"  />     <!-- P2 (1e6 km2) sea_ice_extent : Total area of all Southern-Hemisphere grid cells that are covered by at least 15 % areal fraction of sea ice -->
+   <field id="CMIP6_sifb"          field_ref="dummy_XY"             /> <!-- P2 (m) sea_ice_freeboard : Mean height of sea-ice surface (=snow-ice interface when snow covered) above sea level -->
+   <field id="CMIP6_siflcondbot"   field_ref="dummy_XY"      /> <!-- P2 (W m-2) siflcondbot : the net heat conduction flux at the ice base -->
+   <field id="CMIP6_siflcondtop"   field_ref="dummy_XY"      /> <!-- P2 (W m-2) siflcondtop : the net heat conduction flux at the ice surface -->
+   <field id="CMIP6_siflfwbot"     field_ref="dummy_XY"        /> <!-- P2 (kg m-2 s-1) siflfwbot : Total flux of fresh water from water into sea ice divided by grid-cell area; This flux is negative during ice growth (liquid water mass decreases, hence upward flux of freshwater), positive during ice melt (liquid water mass increases, hence downward flux of freshwater) -->
+   <field id="CMIP6_siflfwdrain"   field_ref="dummy_XY"           /> <!-- P2 (kg m-2 s-1) siflfwdrain : Total flux of fresh water from sea-ice surface into underlying ocean. This combines both surface melt water that drains directly into the ocean and the drainage of surface melt pond. By definition, this flux is always positive. -->
+   <field id="CMIP6_sifllatstop"   field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : the net latent heat flux over sea ice -->
+   <field id="CMIP6_sifllwdtop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : the downwelling longwave flux over sea ice (always positive) -->
+   <field id="CMIP6_sifllwutop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : the upwelling longwave flux over sea ice (always negative) -->
+   <field id="NEMO_siflsaltbot"   field_ref="dummy_XY"      /> <!-- P2 (kg m-2 s-1) siflsaltbot : Total flux of salt from water into sea ice divided by grid-cell area; salt flux is upward (negative) during ice growth when salt is embedded into the ice and downward (positive) during melt when salt from sea ice is again released to the ocean -->
+   <field id="CMIP6_siflsenstop"   field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : the net sensible heat flux over sea ice -->
+   <field id="CMIP6_siflsensupbot" field_ref="dummy_XY"    /> <!-- P2 (W m-2) siflsensupbot : the net sensible heat flux under sea ice from the ocean -->
+   <field id="CMIP6_siflswdbot"    field_ref="dummy_XY"         /> <!-- P2 (W m-2) siflswdbot : The downwelling shortwave flux underneath sea ice (always positive) -->
+   <field id="CMIP6_siflswdtop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : The downwelling shortwave flux over sea ice (always positive by sign convention) -->
+   <field id="CMIP6_siflswutop"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : The upwelling shortwave flux over sea ice (always negative) -->
+   <field id="CMIP6_siforcecoriolx" field_ref="dummy_XY"   /> <!-- P3 (N m-2) siforcecoriolx : X-component of force on sea ice caused by coriolis force -->
+   <field id="CMIP6_siforcecorioly" field_ref="dummy_XY"   /> <!-- P3 (N m-2) siforcecorioly : Y-component of force on sea ice caused by coriolis force -->
+   <field id="CMIP6_siforceintstrx" field_ref="dummy_XY"   /> <!-- P3 (N m-2) siforceintstrx : X-component of force on sea ice caused by internal stress (divergence of sigma) -->
+   <field id="CMIP6_siforceintstry" field_ref="dummy_XY"   /> <!-- P3 (N m-2) siforceintstry : Y-component of force on sea ice caused by internal stress (divergence of sigma) -->
+   <field id="CMIP6_siforcetiltx"  field_ref="dummy_XY"     /> <!-- P3 (N m-2) siforcetiltx : X-component of force on sea ice caused by sea-surface tilt -->
+   <field id="CMIP6_siforcetilty"  field_ref="dummy_XY"     /> <!-- P3 (N m-2) siforcetilty : Y-component of force on sea ice caused by sea-surface tilt -->
+   <field id="CMIP6_sihc"          field_ref="dummy_XY"             /> <!-- P2 (J m-2) integral_of_sea_ice_temperature_wrt_depth_expressed_as_heat_content : Heat content of all ice in grid cell divided by total grid-cell area. Water at 0 Celsius is assumed to have a heat content of 0 J.  Does not include heat content of snow, but does include heat content of brine. Heat content is always negative, since both the sensible and the latent heat content of ice are less than that of water -->
+   <field id="CMIP6_siitdconc"     field_ref="dummy_XY"        /> <!-- P3 (%) siitdconc : Area fraction of grid cell covered by each ice-thickness category (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of the categories as third coordinate axis) -->
+   <field id="CMIP6_siitdsnconc"   field_ref="dummy_XY"         /> <!-- P3 (%) siitdsnconc : Area fraction of grid cell covered by snow in each ice-thickness category (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of the categories as third coordinate axis) -->
+   <field id="CMIP6_siitdsnthick"  field_ref="dummy_XY"     /> <!-- P3 (m) siitdsnthick : Actual thickness of snow in each  category (NOT volume divided by grid area),  (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of categories as third coordinate axis) -->
+   <field id="CMIP6_siitdthick"    field_ref="dummy_XY"       /> <!-- P3 (m) siitdthick : Actual (floe) thickness of sea ice in each  category (NOT volume divided by grid area),  (vector with one entry for each thickness category starting from the thinnest category, netcdf file should use thickness bounds of categories as third coordinate axis) -->
+   <field id="CMIP6_simass"        field_ref="dummy_XY"           /> <!-- P1 (kg m-2) sea_ice_amount : Total mass of sea ice divided by grid-cell area -->
+   <field id="CMIP6_simassacrossline" field_ref="dummy_XY"        /> <!-- P1 (kg s-1) sea_ice_transport_across_line : net (sum of transport in all directions) sea ice area transport through the following four passages, positive into the Arctic Ocean 1. Fram Strait = (11.5W,81.3N to (10.5E,79.6N) 2. Canadian Archipelego = (128.2W,70.6N) to (59.3W,82.1N) 3. Barents opening = (16.8E,76.5N) to (19.2E,70.2N) 4. Bering Strait = (171W,66.2N) to (166W,65N) -->
+   <field id="CMIP6_simpconc"      field_ref="dummy_XY"         /> <!-- P3 (%) area_fraction : Fraction of sea ice, by area, which is covered by melt ponds, giving equal weight to every square metre of sea ice . -->
+   <field id="CMIP6_simpmass"      field_ref="dummy_XY"         /> <!-- P3 (kg m-2) simpmass : Meltpond mass per area of sea ice. -->
+   <field id="CMIP6_simprefrozen"  field_ref="dummy_XY"         /> <!-- P3 (m) simprefrozen : Volume of refrozen ice on melt ponds divided by meltpond covered area -->
+   <field id="CMIP6_sipr"          field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : mass of liquid precipitation falling onto sea ice divided by grid-cell area -->
+   <field id="CMIP6_sirdgconc"     field_ref="dummy_XY"         /> <!-- P3 (1.0) sirdgconc : Fraction of sea ice, by area, which is covered by sea ice ridges, giving equal weight to every square metre of sea ice . -->
+   <field id="CMIP6_sirdgthick"    field_ref="dummy_XY"         /> <!-- P3 (m) sirdgthick : Sea Ice Ridge Height (representing mean height over the ridged area) -->
+   <field id="CMIP6_sisali"        field_ref="dummy_XY"           /> <!-- P1 (0.001) sea_ice_salinity : Mean sea-ice salinity of all sea ice in grid cell -->
+   <field id="CMIP6_sisaltmass"    field_ref="dummy_XY"       /> <!-- P3 (kg m-2) sisaltmass : Total mass of all salt in sea ice divided by grid-cell area -->
+   <field id="CMIP6_sishevel"      field_ref="dummy_XY"         /> <!-- P2 (s-1) sishevel : Maximum shear of sea-ice velocity field (second shear strain invariant) -->
+   <field id="CMIP6_sisnconc"      field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : Fraction of sea ice, by area, which is covered by snow, giving equal weight to every square metre of sea ice . Exclude snow that lies on land or land ice. -->
+   <field id="CMIP6_sisnhc"        field_ref="dummy_XY"           /> <!-- P2 (J m-2) thermal_energy_content_of_surface_snow : Heat-content of all snow in grid cell divided by total grid-cell area. Snow-water equivalent at 0 Celsius is assumed to have a heat content of 0 J.  Does not include heat content of sea ice. -->
+   <field id="CMIP6_sisnmass"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_surface_snow : Total mass of snow on sea ice divided by grid-cell area -->
+   <field id="CMIP6_sisnthick"     field_ref="dummy_XY"        /> <!-- P1 (m) surface_snow_thickness : Actual thickness of snow (snow volume divided by snow-covered area) -->
+   <field id="CMIP6_sispeed"       field_ref="dummy_XY"          /> <!-- P1 (m s-1) sea_ice_speed : Speed of ice (i.e. mean absolute velocity) to account for back-and-forth movement of the ice -->
+   <field id="CMIP6_sistremax"     field_ref="dummy_XY"        /> <!-- P3 (N m-1) sistremax : Maximum shear stress in sea ice (second stress invariant) -->
+   <field id="CMIP6_sistresave"    field_ref="dummy_XY"       /> <!-- P3 (N m-1) sistresave : Average normal stress in sea ice (first stress invariant) -->
+   <field id="CMIP6_sistrxdtop"    field_ref="utau_ice"       /> <!-- P2 (N m-2) surface_downward_x_stress : X-component of atmospheric stress on sea ice -->
+   <field id="CMIP6_sistrxubot"    field_ref="dummy_XY"       /> <!-- P2 (N m-2) sistrxubot : X-component of ocean stress on sea ice -->
+   <field id="CMIP6_sistrydtop"    field_ref="vtau_ice"       /> <!-- P2 (N m-2) surface_downward_y_stress : Y-component of atmospheric stress on sea ice -->
+   <field id="CMIP6_sistryubot"    field_ref="dummy_XY"       /> <!-- P2 (N m-2) downward_y_stress_at_sea_ice_base : Y-component of ocean stress on sea ice -->
+   <field id="CMIP6_sitempbot"     field_ref="dummy_XY"        /> <!-- P2 (K) sitempbot : Report temperature at interface, NOT temperature within lowermost model layer -->
+   <field id="CMIP6_sitempsnic"    field_ref="dummy_XY"       /> <!-- P1 (K) sea_ice_surface_temperature : Report surface temperature of ice where snow thickness is zero -->
+   <field id="CMIP6_sitemptop"     field_ref="dummy_XY"        /> <!-- P1 (K) sea_ice_surface_temperature : Report surface temperature of snow where snow covers the sea ice. -->
+   <field id="CMIP6_sithick"       field_ref="icethic_cea"          /> <!-- P1 (m) sea_ice_thickness : Actual (floe) thickness of sea ice (NOT volume divided by grid area as was done in CMIP5) -->
+   <field id="CMIP6_sitimefrac"    field_ref="ice_pres"       /> <!-- P1 (1.0) sitimefrac : Fraction of time steps of the averaging period during which sea ice is present (siconc >0 ) in a grid cell -->
+   <field id="CMIP6_siu"           field_ref="dummy_XY"              /> <!-- P1 (m s-1) sea_ice_x_velocity : The x-velocity of ice on native model grid -->
+   <field id="CMIP6_siv"           field_ref="dummy_XY"              /> <!-- P1 (m s-1) sea_ice_y_velocity : The y-velocity of ice on native model grid -->
+   <field id="CMIP6_sivol"         field_ref="dummy_not_provided"            /> <!-- P1 (m) sea_ice_thickness : Total volume of sea ice divided by grid-cell area (this used to be called ice thickness in CMIP5) -->
+   <field id="CMIP6_sivoln"        field_ref="dummy_XY"  />     <!-- P2 (1e3 km3) sea_ice_volume : total volume of sea ice in the Northern hemisphere -->
+   <field id="CMIP6_sivols"        field_ref="dummy_XY"  />     <!-- P2 (1e3 km3) sea_ice_volume : total volume of sea ice in the Southern hemisphere -->
+   <field id="CMIP6_sndmassdyn"    field_ref="dummy_XY"       /> <!-- P2 (kg m-2 s-1) sndmassdyn : the rate of change of snow mass through advection with sea ice divided by grid-cell area -->
+   <field id="CMIP6_sndmassmelt"   field_ref="dummy_XY"      /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : the rate of change of snow mass through melt divided by grid-cell area -->
+   <field id="CMIP6_sndmasssi"     field_ref="dummy_XY"        /> <!-- P2 (kg m-2 s-1) sndmasssi : the rate of change of snow mass due to transformation of snow to sea ice divided by grid-cell area -->
+   <field id="CMIP6_sndmasssnf"    field_ref="dummy_XY"       /> <!-- P1 (kg m-2 s-1) snowfall_flux : mass of solid precipitation falling onto sea ice divided by grid-cell area -->
+   <field id="CMIP6_sndmasssubl"   field_ref="dummy_XY"      /> <!-- P2 (kg m-2 s-1) sndmasssubl : the rate of change of snow mass through sublimation and evaporation divided by grid-cell area -->
+   <field id="CMIP6_sndmasswindrif" field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) sndmasswindrif : the rate of change of snow mass through wind drift of snow (from sea-ice into the sea) divided by grid-cell area -->
+   <field id="CMIP6_snmassacrossline" field_ref="dummy_XY"        /> <!-- P2 (kg s-1) snmassacrossline : net (sum of transport in all directions) snow mass transport through the following four passages, positive into the Arctic Ocean 1. Fram Strait = (11.5W,81.3N to (10.5E,79.6N) 2. Canadian Archipelego = (128.2W,70.6N) to (59.3W,82.1N) 3. Barents opening = (16.8E,76.5N) to (19.2E,70.2N) 4. Bering Strait = (171W,66.2N) to (166W,65N) -->
+
+<!-- for variables which realm equals one of _ocnBgchem-->
+   <field id="CMIP6_arag"          field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water : sum of particulate aragonite components (e.g. Phytoplankton, Detrital, etc.) -->
+   <field id="CMIP6_aragos"        field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water : sum of particulate aragonite components (e.g. Phytoplankton, Detrital, etc.) -->
+   <field id="CMIP6_bacc"          field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_bacteria_expressed_as_carbon_in_sea_water : sum of bacterial carbon component concentrations -->
+   <field id="CMIP6_baccos"        field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_bacteria_expressed_as_carbon_in_sea_water : sum of bacterial carbon component concentrations -->
+   <field id="CMIP6_bddtalk"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_sea_water_alkalinity_expressed_as_mole_equivalent_due_to_biological_processes : Net of biological terms in time rate of change of alkalinity -->
+   <field id="CMIP6_bddtdic"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_inorganic_carbon_in_sea_water_due_to_biological_processes : Net of biological terms in time rate of change of dissolved inorganic carbon -->
+   <field id="CMIP6_bddtdife"      field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_inorganic_iron_in_sea_water_due_to_biological_processes : Net of biological terms in time rate of change of dissolved inorganic iron -->
+   <field id="CMIP6_bddtdin"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_inorganic_nitrogen_in_sea_water_due_to_biological_processes : Net of biological terms in time rate of change of nitrogen nutrients (e.g. NO3+NH4) -->
+   <field id="CMIP6_bddtdip"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_inorganic_phosphorus_in_sea_water_due_to_biological_processes : Net of biological terms in time rate of change of dissolved phosphorus -->
+   <field id="CMIP6_bddtdisi"      field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_inorganic_silicon_in_sea_water_due_to_biological_processes : Net of biological terms in time rate of change of dissolved inorganic silicon -->
+   <field id="CMIP6_bfe"           field_ref="BFe"  > BFe * 1e-3 + SFe * 1e-3  </field>  <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_iron_in_sea_water : sum of particulate organic iron component concentrations -->
+   <field id="CMIP6_bfeos"         field_ref="dummy_XYO" /> <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_iron_in_sea_water : sum of particulate organic iron component concentrations -->
+   <field id="CMIP6_bsi"           field_ref="GSi"      >   GSi * 1e-3 </field> <!-- P2 (mol m-3) mole_concentration_of_particulate_matter_expressed_as_silicon_in_sea_water : sum of particulate silica component concentrations -->
+   <field id="CMIP6_bsios"         field_ref="dummy_XYO" /> <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_silicon_in_sea_water : sum of particulate silica component concentrations -->
+   <field id="CMIP6_calc"          field_ref="CaCO3"   >  CaCO3 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_calcite_expressed_as_carbon_in_sea_water : sum of particulate calcite component concentrations (e.g. Phytoplankton, Detrital, etc.) -->
+   <field id="CMIP6_calcos"        field_ref="dummy_XYO"   /> <!-- P2 (mol m-3) mole_concentration_of_calcite_expressed_as_carbon_in_sea_water : sum of particulate calcite component concentrations (e.g. Phytoplankton, Detrital, etc.) -->
+   <field id="CMIP6_chl"           field_ref="NCHL"    > NCHL * 1e-3 + DCHL * 1e-3 </field> <!-- P1 (kg m-3) mass_concentration_of_phytoplankton_expressed_as_chlorophyll_in_sea_water : sum of chlorophyll from all phytoplankton group concentrations.  In most models this is equal to chldiat+chlmisc, that is the sum of "Diatom Chlorophyll Mass Concentration" plus "Other Phytoplankton Chlorophyll Mass Concentration" -->
+   <field id="CMIP6_chlcalc"       field_ref="dummy_XYO"        /> <!-- P2 (kg m-3) mass_concentration_of_calcareous_phytoplankton_expressed_as_chlorophyll_in_sea_water : chlorophyll concentration from the calcite-producing phytoplankton component alone -->
+   <field id="CMIP6_chlcalcos"     field_ref="dummy_XY"         /> <!-- P2 (kg m-3) mass_concentration_of_calcareous_phytoplankton_expressed_as_chlorophyll_in_sea_water : chlorophyll concentration from the calcite-producing phytoplankton component alone -->
+   <field id="CMIP6_chldiat"       field_ref="DCHL"  > DCHL * 1e-3  </field> <!-- P2 (kg m-3) mass_concentration_of_diatoms_expressed_as_chlorophyll_in_sea_water : chlorophyll from diatom phytoplankton component concentration alone -->
+   <field id="CMIP6_chldiatos"     field_ref="dummy_XYO" /> <!-- P2 (kg m-3) mass_concentration_of_diatoms_expressed_as_chlorophyll_in_sea_water : chlorophyll from diatom phytoplankton component concentration alone -->
+   <field id="CMIP6_chldiaz"       field_ref="dummy_XYO"        /> <!-- P2 (kg m-3) mass_concentration_of_diazotrophs_expressed_as_chlorophyll_in_sea_water : chlorophyll concentration from the diazotrophic phytoplankton component alone -->
+   <field id="CMIP6_chldiazos"     field_ref="dummy_XY"         /> <!-- P2 (kg m-3) mass_concentration_of_diazotrophs_expressed_as_chlorophyll_in_sea_water : chlorophyll concentration from the diazotrophic phytoplankton component alone -->
+   <field id="CMIP6_chlmisc"       field_ref="NCHL"  > NCHL * 1e-3 </field>  <!-- P2 (kg m-3) mass_concentration_of_miscellaneous_phytoplankton_expressed_as_chlorophyll_in_sea_water : chlorophyll from additional phytoplankton component concentrations alone -->
+   <field id="CMIP6_chlmiscos"     field_ref="dummy_XYO" />  <!-- P2 (kg m-3) mass_concentration_of_miscellaneous_phytoplankton_expressed_as_chlorophyll_in_sea_water : chlorophyll from additional phytoplankton component concentrations alone -->
+   <field id="CMIP6_chlos"         field_ref="dummy_XYO" />  <!-- P1 (kg m-3) mass_concentration_of_phytoplankton_expressed_as_chlorophyll_in_sea_water : sum of chlorophyll from all phytoplankton group concentrations.  In most models this is equal to chldiat+chlmisc, that is the sum of "Diatom Chlorophyll Mass Concentration" plus "Other Phytoplankton Chlorophyll Mass Concentration" -->
+   <field id="CMIP6_chlpico"       field_ref="dummy_XYO"        /> <!-- P2 (kg m-3) mass_concentration_of_picophytoplankton_expressed_as_chlorophyll_in_sea_water : chlorophyll concentration from the picophytoplankton (<2 um) component alone -->
+   <field id="CMIP6_chlpicoos"     field_ref="dummy_XY"         /> <!-- P2 (kg m-3) mass_concentration_of_picophytoplankton_expressed_as_chlorophyll_in_sea_water : chlorophyll concentration from the picophytoplankton (<2 um) component alone -->
+   <field id="CMIP6_co3"           field_ref="CO3"        /> <!-- P1 (mol m-3) mole_concentration_of_carbonate_expressed_as_carbon_in_sea_water : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with a charge of minus two. -->
+   <field id="CMIP6_co3abio"       field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_abiotic_analogue_expressed_as_carbon_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". In ocean biogeochemistry models, an "abiotic analogue" is used to simulate the effect on a modelled variable when biological effects on ocean carbon concentration and alkalinity are ignored. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. -->
+   <field id="CMIP6_co3abioos"     field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_abiotic_analogue_expressed_as_carbon_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". In ocean biogeochemistry models, an "abiotic analogue" is used to simulate the effect on a modelled variable when biological effects on ocean carbon concentration and alkalinity are ignored. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. -->
+   <field id="CMIP6_co3nat"        field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_natural_analogue_expressed_as_carbon_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". In ocean biogeochemistry models, a "natural analogue" is used to simulate the effect on a modelled variable of imposing preindustrial atmospheric carbon dioxide concentrations, even when the model as a whole may be subjected to varying forcings. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. -->
+   <field id="CMIP6_co3natos"      field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_natural_analogue_expressed_as_carbon_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". In ocean biogeochemistry models, a "natural analogue" is used to simulate the effect on a modelled variable of imposing preindustrial atmospheric carbon dioxide concentrations, even when the model as a whole may be subjected to varying forcings. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. -->
+   <field id="CMIP6_co3os"         field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_expressed_as_carbon_in_sea_water : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with a charge of minus two. -->
+   <field id="CMIP6_co3satarag"    field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_carbonate_expressed_as_carbon_at_equilibrium_with_pure_aragonite_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. At a given salinity, the thermodynamic equilibrium is that between dissolved carbonate ion and solid aragonite. Standard names also exist for calcite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_co3sataragos"  field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_expressed_as_carbon_at_equilibrium_with_pure_aragonite_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. At a given salinity, the thermodynamic equilibrium is that between dissolved carbonate ion and solid aragonite. Standard names also exist for calcite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_co3satcalc"    field_ref="CO3sat"        /> <!-- P1 (mol m-3) mole_concentration_of_carbonate_expressed_as_carbon_at_equilibrium_with_pure_calcite_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. At a given salinity, the thermodynamic equilibrium is that between dissolved carbonate ion and solid calcite. Standard names also exist for aragonite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_co3satcalcos"  field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_carbonate_expressed_as_carbon_at_equilibrium_with_pure_calcite_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with an electrical charge of minus two. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. At a given salinity, the thermodynamic equilibrium is that between dissolved carbonate ion and solid calcite. Standard names also exist for aragonite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_darag"         field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water_due_to_dissolution : Rate of change of Aragonite carbon mole concentration  due to dissolution -->
+   <field id="CMIP6_dcalc"         field_ref="DCAL"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_calcite_expressed_as_carbon_in_sea_water_due_to_dissolution : Rate of change of Calcite carbon mole concentration  due to dissolution -->
+   <field id="CMIP6_detoc"         field_ref="POC"  >  POC * 1e-3 + GOC * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_organic_detritus_expressed_as_carbon_in_sea_water : sum of detrital organic carbon component concentrations -->
+   <field id="CMIP6_detocos"       field_ref="dummy_XY"  />  <!-- P2 (mol m-3) mole_concentration_of_organic_detritus_expressed_as_carbon_in_sea_water : sum of detrital organic carbon component concentrations -->
+   <field id="CMIP6_dfe"           field_ref="Fer"   >  Fer * 1e-3 </field> <!-- P1 (mol m-3) mole_concentration_of_dissolved_iron_in_sea_water : dissolved iron in sea water is meant to include both Fe2+ and Fe3+ ions (but not, e.g., particulate detrital iron) -->
+   <field id="CMIP6_dfeos"         field_ref="dummy_XY" />  <!-- P1 (mol m-3) mole_concentration_of_dissolved_iron_in_sea_water : dissolved iron in sea water is meant to include both Fe2+ and Fe3+ ions (but not, e.g., particulate detrital iron) -->
+   <field id="CMIP6_dissi13c"      field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_13C_in_sea_water : Dissolved inorganic 14carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissi13cos"    field_ref="dummy_XY"         /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_13C_in_sea_water : Dissolved inorganic 14carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissi14c"      field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_dissolved_inorganic_14C_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Dissolved inorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "C" means the element carbon and "14C" is the radioactive isotope "carbon-14", having six protons and eight neutrons and used in radiocarbon dating. -->
+   <field id="CMIP6_dissi14cabio"  field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_14C_in_sea_water : Abiotic Dissolved inorganic 14carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissi14cabioos" field_ref="dummy_XY"         /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_14C_in_sea_water : Abiotic Dissolved inorganic 14carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissic"        field_ref="DIC"   > DIC * 1e-3 </field> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_carbon_in_sea_water : Dissolved inorganic carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissicabio"    field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_carbon_abiotic_analogue_in_sea_water : Abiotic Dissolved inorganic carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissicabioos"  field_ref="dummy_XY"         /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_carbon_abiotic_analogue_in_sea_water : Abiotic Dissolved inorganic carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissicnat"     field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_carbon_natural_analogue_in_sea_water : Dissolved inorganic carbon (CO3+HCO3+H2CO3) concentration at preindustrial atmospheric xCO2 -->
+   <field id="CMIP6_dissicnatos"   field_ref="dummy_XY"         /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_carbon_natural_analogue_in_sea_water : Dissolved inorganic carbon (CO3+HCO3+H2CO3) concentration at preindustrial atmospheric xCO2 -->
+   <field id="CMIP6_dissicos"      field_ref="dummy_XY"  /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_carbon_in_sea_water : Dissolved inorganic carbon (CO3+HCO3+H2CO3) concentration -->
+   <field id="CMIP6_dissoc"        field_ref="DOC"     >  DOC * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_dissolved_organic_carbon_in_sea_water : Sum of dissolved carbon component concentrations explicitly represented (i.e. not ~40 uM refractory unless explicit) -->
+   <field id="CMIP6_dissocos"        field_ref="dummy_XY"     /> <!-- P2 (mol m-3) mole_concentration_of_dissolved_organic_carbon_in_sea_water : Sum of dissolved carbon component concentrations explicitly represented (i.e. not ~40 uM refractory unless explicit) -->
+   <field id="CMIP6_dmso"          field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_dimethyl_sulfide_in_sea_water : Mole concentration of dimethyl sulphide in water -->
+   <field id="CMIP6_dmsos"         field_ref="dummy_XY"         /> <!-- P3 (mol m-3) mole_concentration_of_dimethyl_sulfide_in_sea_water : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dimethyl sulfide is (CH3)2S.  Dimethyl sulfide is sometimes referred to as DMS. -->
+   <field id="CMIP6_dpco2"         field_ref="Dpco2"  > this * 0.101325  </field> <!-- P1 (Pa) surface_carbon_dioxide_partial_pressure_difference_between_sea_water_and_air : The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium.  The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume.  The surface called "surface" means the lower boundary of the atmosphere.  The chemical formula for carbon dioxide is CO2. -->
+   <field id="CMIP6_dpco2abio"     field_ref="dummy_XY"         /> <!-- P3 (Pa) surface_carbon_dioxide_abiotic_analogue_partial_pressure_difference_between_sea_water_and_air : The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. In ocean biogeochemistry models, an "abiotic analogue" is used to simulate the effect on a modelled variable when biological effects on ocean carbon concentration and alkalinity are ignored. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure difference between sea water and air is positive when the partial pressure of the dissolved gas in sea water is greater than the partial pressure in air. -->
+   <field id="CMIP6_dpco2nat"      field_ref="dummy_XY"         /> <!-- P3 (Pa) surface_carbon_dioxide_natural_analogue_partial_pressure_difference_between_sea_water_and_air : The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. In ocean biogeochemistry models, a "natural analogue" is used to simulate the effect on a modelled variable of imposing preindustrial atmospheric carbon dioxide concentrations, even when the model as a whole may be subjected to varying forcings. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure difference between sea water and air is positive when the partial pressure of the dissolved gas in sea water is greater than the partial pressure in air. -->
+   <field id="CMIP6_dpo2"          field_ref="Dpo2"   > this * 0.101325 </field> <!-- P3 (Pa) surface_molecular_oxygen_partial_pressure_difference_between_sea_water_and_air : The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium.  The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume.  The surface called "surface" means the lower boundary of the atmosphere. -->
+   <field id="CMIP6_eparag100"     field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_aragonite_expressed_as_carbon_in_sea_water : The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_epc100"        field_ref="EPC100"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_organic_matter_expressed_as_carbon_in_sea_water : The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_epcalc100"     field_ref="EPCAL100"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_calcite_expressed_as_carbon_in_sea_water : The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_epfe100"       field_ref="EPFE100"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_iron_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_epn100"        field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_organic_nitrogen_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_epp100"        field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_organic_phosphorus_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_epsi100"       field_ref="EPSI100"         /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_silicon_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_exparag"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_aragonite_expressed_as_carbon_in_sea_water : Downward flux of Aragonite -->
+   <field id="CMIP6_expc"          field_ref="EXPC"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_organic_matter_expressed_as_carbon_in_sea_water : Downward flux of particulate organic carbon -->
+   <field id="CMIP6_expcalc"       field_ref="EXPCAL"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_calcite_expressed_as_carbon_in_sea_water : Downward flux of Calcite -->
+   <field id="CMIP6_expfe"         field_ref="EXPFE"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_iron_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_expn"          field_ref="dummy_XYO"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_organic_nitrogen_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_expp"          field_ref="dummy_XYO"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_organic_phosphorus_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_expsi"         field_ref="EXPSI"        /> <!-- P1 (mol m-2 s-1) sinking_mole_flux_of_particulate_silicon_in_sea_water : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.   'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. -->
+   <field id="CMIP6_fbddtalk"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) integral_wrt_depth_of_tendency_of_sea_water_alkalinity_expressed_as_mole_equivalent_due_to_biological_processes : vertical integral of net biological terms in time rate of change of alkalinity -->
+   <field id="CMIP6_fbddtdic"      field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_carbon_due_to_biological_processes : vertical integral of net biological terms in time rate of change of dissolved inorganic carbon -->
+   <field id="CMIP6_fbddtdife"     field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_iron_due_to_biological_processes : vertical integral of net biological terms in time rate of change of dissolved inorganic iron -->
+   <field id="CMIP6_fbddtdin"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_nitrogen_due_to_biological_processes : vertical integral of net biological terms in time rate of change of nitrogen nutrients (e.g. NO3+NH4) -->
+   <field id="CMIP6_fbddtdip"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_phosphorus_due_to_biological_processes : vertical integral of net biological terms in time rate of change of phosphorus -->
+   <field id="CMIP6_fbddtdisi"     field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_silicon_due_to_biological_processes : vertical integral of net biological terms in time rate of change of dissolved inorganic silicon -->
+   <field id="CMIP6_fddtalk"       field_ref="dummy_XYO"        /> <!-- P2 (mol m-2 s-1) integral_wrt_depth_of_tendency_of_sea_water_alkalinity_expressed_as_mole_equivalent : vertical integral of net time rate of change of total alkalinity -->
+   <field id="CMIP6_fddtdic"       field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_carbon : "Content" indicates a quantity per unit area.  "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" isthe term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models.  Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. -->
+   <field id="CMIP6_fddtdife"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_iron : vertical integral of net time rate of change of dissolved inorganic iron -->
+   <field id="CMIP6_fddtdin"       field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_nitrogen : Net time rate of change of nitrogen nutrients (e.g. NO3+NH4) -->
+   <field id="CMIP6_fddtdip"       field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_phosphorus : vertical integral of net  time rate of change of phosphate -->
+   <field id="CMIP6_fddtdisi"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_dissolved_inorganic_silicon : vertical integral of net time rate of change of dissolved inorganic silicon -->
+   <field id="CMIP6_fediss"        field_ref="dummy_XYO"        /> <!-- P3 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_iron_in_sea_water_due_to_dissolution_from_inorganic_particles : Dissolution, remineralization and desorption of iron back to the dissolved phase -->
+   <field id="CMIP6_fescav"        field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_dissolved_iron_in_sea_water_due_to_scavenging_by_inorganic_particles : Dissolved Fe removed through nonbiogenic scavenging onto particles -->
+   <field id="CMIP6_fg13co2"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_downward_mass_flux_of_13C_dioxide_abiotic_analogue_expressed_as_13C : Gas exchange flux of abiotic 13CO2 (positive into ocean) -->
+   <field id="CMIP6_fg14co2"       field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_downward_mass_flux_of_14C_dioxide_abiotic_analogue_expressed_as_carbon : The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. In ocean biogeochemistry models, an "abiotic analogue" is used to simulate the effect on a modelled variable when biological effects on ocean carbon concentration and alkalinity are ignored. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "C" means the element carbon and "14C" is the radioactive isotope "carbon-14", having six protons and eight neutrons and used in radiocarbon dating. -->
+   <field id="CMIP6_fg14co2abio"   field_ref="dummy_XYO"        /> <!-- P1 (kg m-2 s-1) surface_downward_mass_flux_of_14C_dioxide_abiotic_analogue_expressed_as_carbon : Gas exchange flux of abiotic 14CO2 (positive into ocean) -->
+   <field id="CMIP6_fgco2"         field_ref="Cflx" > this * 12 * 1e-3 </field>  <!-- P1 (kg m-2 s-1) surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon : Gas exchange flux of CO2 (positive into ocean) -->
+   <field id="CMIP6_fgco2abio"     field_ref="dummy_XYO"        /> <!-- P1 (kg m-2 s-1) surface_downward_mass_flux_of_carbon_dioxide_abiotic_analogue_expressed_as_carbon : Gas exchange flux of abiotic CO2 (positive into ocean) -->
+   <field id="CMIP6_fgco2nat"      field_ref="dummy_XYO"        /> <!-- P1 (kg m-2 s-1) surface_downward_mass_flux_of_carbon_dioxide_natural_analogue_expressed_as_carbon : Gas exchange flux of natural CO2 (positive into ocean) -->
+   <field id="CMIP6_fgdms"         field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) surface_upward_mole_flux_of_dimethyl_sulfide : Gas exchange flux of DMS (positive into atmosphere) -->
+   <field id="CMIP6_fgo2"          field_ref="Oflx"         /> <!-- P1 (mol m-2 s-1) surface_downward_mole_flux_of_molecular_oxygen : Gas exchange flux of O2 (positive into ocean) -->
+   <field id="CMIP6_frfe"          field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_iron_due_to_sedimentation : "Content" indicates a quantity per unit area.  The specification of a physical process by the phrase due_to_process means that the quantity named is a  single term in a sum of terms which together compose the general quantity  named by omitting the phrase.  "tendency_of_X" means derivative of X with respect to time. -->
+   <field id="CMIP6_fric"          field_ref="SedCal"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_inorganic_carbon_due_to_sedimentation : Inorganic Carbon loss to sediments -->
+   <field id="CMIP6_frn"           field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_elemental_nitrogen_due_to_denitrification_and_sedimentation : "Content" indicates a quantity per unit area.  The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity  named by omitting the phrase. 'Denitrification' is the conversion of nitrate into gasesous compounds such as nitric oxide, nitrous oxide and molecular nitrogen which are then emitted to the atmosphere.  'Sedimentation' is the sinking of particulate matter to the floor of a body of water. "tendency_of_X" means derivative of X with respect to time. -->
+   <field id="CMIP6_froc"          field_ref="SedC"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_organic_carbon_due_to_sedimentation : Organic Carbon loss to sediments -->
+   <field id="CMIP6_fsfe"          field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_iron_due_to_deposition_and_runoff_and_sediment_dissolution : Iron supply through deposition flux onto sea surface, runoff, coasts, sediments, etc -->
+   <field id="CMIP6_fsn"           field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_elemental_nitrogen_due_to_deposition_and_fixation_and_runoff : "Content" indicates a quantity per unit area.  The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity  named by omitting the phrase. Deposition of nitrogen into the ocean is the sum of dry and wet depositionof nitrogen species onto the ocean surface from the atmosphere.  'Nitrogen fixation' means the production of ammonia from nitrogen gas. Organisms that fix nitrogen are termed 'diazotrophs'. Diazotrophic phytoplankton can fix atmospheric nitrogen, thus increasing the content of nitrogen in the ocean. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage."tendency_of_X" means derivative of X with respect to time. -->
+   <field id="CMIP6_graz"          field_ref="GRAZ1" > this + GRAZ2 </field>  <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_grazing_of_phytoplankton : "tendency_of_X" means derivative of X with respect to time. Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "Grazing of phytoplankton" means the grazing of phytoplankton by zooplankton. -->
+   <field id="CMIP6_icfriver"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_inorganic_carbon_due_to_runoff_and_sediment_dissolution : Inorganic Carbon supply to ocean through runoff (separate from gas exchange) -->
+   <field id="CMIP6_intdic"        field_ref="INTDIC"         /> <!-- P1 (kg m-2) ocean_mass_content_of_dissolved_inorganic_carbon : Vertically integrated DIC -->
+   <field id="CMIP6_intdoc"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2) ocean_mass_content_of_dissolved_organic_carbon : Vertically integrated DOC (explicit pools only) -->
+   <field id="CMIP6_intparag"      field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_aragonite_expressed_as_carbon_due_to_biological_production : Vertically integrated aragonite production -->
+   <field id="CMIP6_intpbfe"       field_ref="INTPBFE"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_iron_due_to_biological_production : Vertically integrated biogenic iron production -->
+   <field id="CMIP6_intpbn"        field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_nitrogen_due_to_biological_production : Vertically integrated biogenic nitrogen production -->
+   <field id="CMIP6_intpbp"        field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_phosphorus_due_to_biological_production : Vertically integrated biogenic phosphorus production -->
+   <field id="CMIP6_intpbsi"       field_ref="INTPBSI"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_silicon_due_to_biological_production : Vertically integrated biogenic silica production -->
+   <field id="CMIP6_intpcalcite"   field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_calcite_expressed_as_carbon_due_to_biological_production : Vertically integrated calcite production -->
+   <field id="CMIP6_intpn2"        field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) tendency_of_ocean_mole_content_of_elemental_nitrogen_due_to_fixation : Vertically integrated nitrogen fixation -->
+   <field id="CMIP6_intpoc"        field_ref="dummy_XY"         /> <!-- P2 (kg m-2) ocean_mass_content_of_particulate_organic_matter_expressed_as_carbon : Vertically integrated POC -->
+   <field id="CMIP6_intpp"         field_ref="INTPP"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_phytoplankton : Vertically integrated total primary (organic carbon) production by phytoplankton.  This should equal the sum of intpdiat+intpphymisc, but those individual components may be unavailable in some models. -->
+   <field id="CMIP6_intppcalc"     field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_calcareous_phytoplankton : "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "Calcareous phytoplankton" are phytoplankton that produce calcite. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_intppdiat"     field_ref="INTPPPHY2"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_diatoms : Vertically integrated primary (organic carbon) production by the diatom phytoplankton component alone -->
+   <field id="CMIP6_intppdiaz"     field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_diazotrophs : "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. -->
+   <field id="CMIP6_intppmisc"     field_ref="INTPPPHY"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_miscellaneous_phytoplankton : Vertically integrated total primary (organic carbon) production by other phytoplankton components alone -->
+   <field id="CMIP6_intppnitrate"  field_ref="INTPNEW"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_due_to_nitrate_utilization : Vertically integrated primary (organic carbon) production by phytoplankton based on nitrate uptake alone -->
+   <field id="CMIP6_intpppico"     field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_picophytoplankton : "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. -->
+   <field id="CMIP6_limfecalc"     field_ref="dummy_XY"         /> <!-- P1 (1) iron_growth_limitation_of_calcareous_phytoplankton : "Calcareous phytoplankton" are phytoplankton that produce calcite. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Iron growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of iron) to the theoretical growth rate if there were no such limit on iron availability. -->
+   <field id="CMIP6_limfediat"     field_ref="dummy_XY"         /> <!-- P1 (1) iron_growth_limitation_of_diatoms : Diatoms are phytoplankton with an external skeleton made of silica. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Iron growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of iron) to the theoretical growth rate if there were no such limit on iron availability. -->
+   <field id="CMIP6_limfediaz"     field_ref="dummy_XY"         /> <!-- P1 (1) iron_growth_limitation_of_diazotrophs : In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Iron growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of iron) to the theoretical growth rate if there were no such limit on iron availability. -->
+   <field id="CMIP6_limfemisc"     field_ref="dummy_XY"         /> <!-- P1 (1) iron_growth_limitation_of_miscellaneous_phytoplankton : Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Miscellaneous phytoplankton" are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other separately named components of the phytoplankton population. "Iron growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of iron) to the theoretical growth rate if there were no such limit on iron availability. -->
+   <field id="CMIP6_limfepico"     field_ref="dummy_XY"         /> <!-- P1 (1) iron_growth_limitation_of_picophytoplankton : Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Iron growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of iron) to the theoretical growth rate if there were no such limit on iron availability. -->
+   <field id="CMIP6_limirrcalc"    field_ref="dummy_XY"         /> <!-- P1 (1) growth_limitation_of_calcareous_phytoplankton_due_to_solar_irradiance : "Calcareous phytoplankton" are phytoplankton that produce calcite.  Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Irradiance" means the power per unit area (called radiative flux in other standard names), the area being normal to the direction of flow of the radiant energy. Solar irradiance is essential to the photosynthesis reaction and its presence promotes the growth of phytoplankton populations. "Growth limitation due to solar irradiance" means the ratio of the growth rate of a species population in the environment (where the amount of sunlight reaching a location may be limited) to the theoretical growth rate if there were no such limit on solar irradiance. -->
+   <field id="CMIP6_limirrdiat"    field_ref="dummy_XY"         /> <!-- P1 (1) growth_limitation_of_diatoms_due_to_solar_irradiance : Diatoms are phytoplankton with an external skeleton made of silica. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Irradiance" means the power per unit area (called radiative flux in other standard names), the area being normal to the direction of flow of the radiant energy. Solar irradiance is essential to the photosynthesis reaction and its presence promotes the growth of phytoplankton populations. "Growth limitation due to solar irradiance" means the ratio of the growth rate of a species population in the environment (where the amount of sunlight reaching a location may be limited) to the theoretical growth rate if there were no such limit on solar irradiance. -->
+   <field id="CMIP6_limirrdiaz"    field_ref="dummy_XY"         /> <!-- P1 (1) growth_limitation_of_diazotrophs_due_to_solar_irradiance : In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Irradiance" means the power per unit area (called radiative flux in other standard names), the area being normal to the direction of flow of the radiant energy. Solar irradiance is essential to the photosynthesis reaction and its presence promotes the growth of phytoplankton populations. "Growth limitation due to solar irradiance" means the ratio of the growth rate of a species population in the environment (where the amount of sunlight reaching a location may be limited) to the theoretical growth rate if there were no such limit on solar irradiance. -->
+   <field id="CMIP6_limirrmisc"    field_ref="dummy_XY"         /> <!-- P1 (1) growth_limitation_of_miscellaneous_phytoplankton_due_to_solar_irradiance : Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Miscellaneous phytoplankton" are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other separately named components of the phytoplankton population. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Irradiance" means the power per unit area (called radiative flux in other standard names), the area being normal to the direction of flow of the radiant energy. Solar irradiance is essential to the photosynthesis reaction and its presence promotes the growth of phytoplankton populations. "Growth limitation due to solar irradiance" means the ratio of the growth rate of a species population in the environment (where the amount of sunlight reaching a location may be limited) to the theoretical growth rate if there were no such limit on solar irradiance. -->
+   <field id="CMIP6_limirrpico"    field_ref="dummy_XY"         /> <!-- P1 (1) growth_limitation_of_picophytoplankton_due_to_solar_irradiance : Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Irradiance" means the power per unit area (called radiative flux in other standard names), the area being normal to the direction of flow of the radiant energy. Solar irradiance is essential to the photosynthesis reaction and its presence promotes the growth of phytoplankton populations. "Growth limitation due to solar irradiance" means the ratio of the growth rate of a species population in the environment (where the amount of sunlight reaching a location may be limited) to the theoretical growth rate if there were no such limit on solar irradiance. -->
+   <field id="CMIP6_limncalc"      field_ref="dummy_XY"         /> <!-- P1 (1) nitrogen_growth_limitation_of_calcareous_phytoplankton : "Calcareous phytoplankton" are phytoplankton that produce calcite. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Nitrogen growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of nitrogen) to the theoretical growth rate if there were no such limit on nitrogen availability. -->
+   <field id="CMIP6_limndiat"      field_ref="dummy_XY"         /> <!-- P1 (1) nitrogen_growth_limitation_of_diatoms : Diatoms are phytoplankton with an external skeleton made of silica. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Nitrogen growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of nitrogen) to the theoretical growth rate if there were no such limit on nitrogen availability. -->
+   <field id="CMIP6_limndiaz"      field_ref="dummy_XY"         /> <!-- P1 (1) nitrogen_growth_limitation_of_diazotrophs : In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Nitrogen growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of nitrogen) to the theoretical growth rate if there were no such limit on nitrogen availability. -->
+   <field id="CMIP6_limnmisc"      field_ref="dummy_XY"         /> <!-- P1 (1) nitrogen_growth_limitation_of_miscellaneous_phytoplankton : Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Miscellaneous phytoplankton" are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other separately named components of the phytoplankton population. "Nitrogen growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of nitrogen) to the theoretical growth rate if there were no such limit on nitrogen availability. -->
+   <field id="CMIP6_limnpico"      field_ref="dummy_XY"         /> <!-- P1 (1) nitrogen_growth_limitation_of_picophytoplankton : Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are algae that grow where there is sufficient light to support photosynthesis. "Nitrogen growth limitation" means the ratio of the growth rate of a species population in the environment (where there is a finite availability of nitrogen) to the theoretical growth rate if there were no such limit on nitrogen availability. -->
+   <field id="CMIP6_nh4"           field_ref="NH4"    > NH4 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_ammonium_in_sea_water : Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. -->
+   <field id="CMIP6_nh4os"         field_ref="dummy_XY" />  <!-- P2 (mol m-3) mole_concentration_of_ammonium_in_sea_water : Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. -->
+   <field id="CMIP6_no3"           field_ref="NO3"    > NO3 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_nitrate_in_sea_water : Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. -->
+   <field id="CMIP6_no3os"         field_ref="dummy_XY" /> <!-- P1 (mol m-3) mole_concentration_of_nitrate_in_sea_water : Mole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. -->
+   <field id="CMIP6_o2"            field_ref="O2"  > O2 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_dissolved_molecular_oxygen_in_sea_water : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. -->
+   <field id="CMIP6_o2min"         field_ref="O2MIN"            />  <!-- P1 (mol m-3) mole_concentration_of_dissolved_molecular_oxygen_in_sea_water_at_shallowest_local_minimum_in_vertical_profile : 'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The concentration of any chemical species, whether particulate or dissolved, may vary with depth in the ocean.  A depth profile may go through one or more local minima in concentration. The mole_concentration_of_molecular_oxygen_in_sea_water_at_shallowest_local_minimum_in_vertical_profile is the mole concentration of oxygen at the local minimum in the concentration profile that occurs closest to the sea surface. -->
+   <field id="CMIP6_o2os"          field_ref="dummy_XY"  /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_molecular_oxygen_in_sea_water : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. -->
+   <field id="CMIP6_o2sat"         field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_dissolved_molecular_oxygen_in_sea_water_at_saturation : "Mole concentration at saturation" means the mole concentration in a saturated solution. Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". -->
+   <field id="CMIP6_o2satos"       field_ref="dummy_XY"         /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_molecular_oxygen_in_sea_water_at_saturation : "Mole concentration at saturation" means the mole concentration in a saturated solution. Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". -->
+   <field id="CMIP6_ocfriver"      field_ref="dummy_XY"         /> <!-- P3 (mol m-2 s-1) tendency_of_ocean_mole_content_of_organic_carbon_due_to_runoff_and_sediment_dissolution : Organic Carbon supply to ocean through runoff (separate from gas exchange) -->
+   <field id="CMIP6_parag"         field_ref="dummy_XYO"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water_due_to_biological_production : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a  single term in a sum of terms which together compose the general quantity  named by omitting the phrase.  "tendency_of_X" means derivative of X with respect to time.  Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_pbfe"          field_ref="PFeN" > this + PFeD </field>  <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_iron_in_sea_water_due_to_biological_production : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a  single term in a sum of terms which together compose the general quantity  named by omitting the phrase.  "tendency_of_X" means derivative of X with respect to time. -->
+   <field id="CMIP6_pbsi"          field_ref="PBSi"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_silicon_in_sea_water_due_to_biological_production : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a  single term in a sum of terms which together compose the general quantity  named by omitting the phrase.  "tendency_of_X" means derivative of X with respect to time. -->
+   <field id="CMIP6_pcalc"         field_ref="PCAL"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_calcite_expressed_as_carbon_in_sea_water_due_to_biological_production : 'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y.  A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a  single term in a sum of terms which together compose the general quantity  named by omitting the phrase.  "tendency_of_X" means derivative of X with respect to time.  Calcite is a mineral that is a polymorph of calcium carbonate. Thechemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate. -->
+   <field id="CMIP6_ph"            field_ref="PH"        /> <!-- P1 (1) sea_water_ph_reported_on_total_scale : negative log10 of hydrogen ion concentration with the concentration expressed as mol H kg-1. -->
+   <field id="CMIP6_phabio"        field_ref="dummy_XYO"        /> <!-- P1 (1) sea_water_ph_abiotic_analogue_reported_on_total_scale : negative log10 of hydrogen ion concentration with the concentration expressed as mol H kg-1 (abiotic component).. -->
+   <field id="CMIP6_phabioos"      field_ref="dummy_XY"         /> <!-- P2 (1) sea_water_ph_abiotic_analogue_reported_on_total_scale : negative log10 of hydrogen ion concentration with the concentration expressed as mol H kg-1. -->
+   <field id="CMIP6_phnat"         field_ref="dummy_XYO"        /> <!-- P1 (1) sea_water_ph_natural_analogue_reported_on_total_scale : negative log10 of hydrogen ion concentration with the concentration expressed as mol H kg-1 (natural component). -->
+   <field id="CMIP6_phnatos"       field_ref="dummy_XY"         /> <!-- P2 (1) sea_water_ph_natural_analogue_reported_on_total_scale : negative log10 of hydrogen ion concentration with the concentration expressed as mol H kg-1. -->
+   <field id="CMIP6_phos"          field_ref="dummy_XY"         /> <!-- P1 (1) sea_water_ph_reported_on_total_scale : negative log10 of hydrogen ion concentration with the concentration expressed as mol H kg-1. -->
+   <field id="CMIP6_phyc"          field_ref="PHY"   > PHY * 1e-3 + PHY2 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_carbon_in_sea_water : sum of phytoplankton carbon component concentrations.  In most (all?) cases this is the sum of phycdiat and phycmisc (i.e., "Diatom Carbon Concentration" and "Non-Diatom Phytoplankton Carbon Concentration" -->
+   <field id="CMIP6_phycalc"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_calcareous_phytoplankton_expressed_as_carbon_in_sea_water : carbon concentration from calcareous (calcite-producing) phytoplankton component alone -->
+   <field id="CMIP6_phycalcos"     field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_calcareous_phytoplankton_expressed_as_carbon_in_sea_water : carbon concentration from calcareous (calcite-producing) phytoplankton component alone -->
+   <field id="CMIP6_phycos"        field_ref="dummy_XY" />  <!-- P1 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_carbon_in_sea_water : sum of phytoplankton carbon component concentrations.  In most (all?) cases this is the sum of phycdiat and phycmisc (i.e., "Diatom Carbon Concentration" and "Non-Diatom Phytoplankton Carbon Concentration" -->
+   <field id="CMIP6_phydiat"       field_ref="PHY2"   > PHY2 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_diatoms_expressed_as_carbon_in_sea_water : carbon from the diatom phytoplankton component concentration alone -->
+   <field id="CMIP6_phydiatos"     field_ref="dummy_XY"  />  <!-- P2 (mol m-3) mole_concentration_of_diatoms_expressed_as_carbon_in_sea_water : carbon from the diatom phytoplankton component concentration alone -->
+   <field id="CMIP6_phydiaz"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_diazotrophs_expressed_as_carbon_in_sea_water : carbon concentration from the diazotrophic phytoplankton component alone -->
+   <field id="CMIP6_phydiazos"     field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_diazotrophs_expressed_as_carbon_in_sea_water : carbon concentration from the diazotrophic phytoplankton component alone -->
+   <field id="CMIP6_phyfe"         field_ref="NFe"   > NFe * 1e-3 + DFe * 1e-3 </field>  <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_iron_in_sea_water : sum of phytoplankton iron component concentrations -->
+   <field id="CMIP6_phyfeos"       field_ref="dummy_XY" /> <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_iron_in_sea_water : sum of phytoplankton iron component concentrations -->
+   <field id="CMIP6_phymisc"       field_ref="PHY"   > PHY * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_miscellaneous_phytoplankton_expressed_as_carbon_in_sea_water : carbon concentration from additional phytoplankton component alone -->
+	   <field id="CMIP6_phymiscos"     field_ref="dummy_XY"   />  <!-- P2 (mol m-3) mole_concentration_of_miscellaneous_phytoplankton_expressed_as_carbon_in_sea_water : carbon concentration from additional phytoplankton component alone -->
+   <field id="CMIP6_phyn"          field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_nitrogen_in_sea_water : sum of phytoplankton nitrogen component concentrations -->
+   <field id="CMIP6_phynos"        field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_nitrogen_in_sea_water : sum of phytoplankton nitrogen component concentrations -->
+   <field id="CMIP6_phyp"          field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_phosphorus_in_sea_water : sum of phytoplankton phosphorus components -->
+   <field id="CMIP6_phypico"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_picophytoplankton_expressed_as_carbon_in_sea_water : carbon concentration from the picophytoplankton (<2 um) component alone -->
+   <field id="CMIP6_phypicoos"     field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_picophytoplankton_expressed_as_carbon_in_sea_water : carbon concentration from the picophytoplankton (<2 um) component alone -->
+   <field id="CMIP6_phypos"        field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_phosphorus_in_sea_water : sum of phytoplankton phosphorus components -->
+   <field id="CMIP6_physi"         field_ref="DSi"   >  DSi * 1e-3 </field> <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_silicon_in_sea_water : sum of phytoplankton silica component concentrations -->
+   <field id="CMIP6_physios"       field_ref="dummy_XY" />   <!-- P2 (mol m-3) mole_concentration_of_phytoplankton_expressed_as_silicon_in_sea_water : sum of phytoplankton silica component concentrations -->
+   <field id="CMIP6_pnitrate"      field_ref="TPNEW"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_nitrate_utilization : Primary (organic carbon) production by phytoplankton due to nitrate uptake alone -->
+   <field id="CMIP6_po4"           field_ref="PO4" >  PO4 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_phosphorus_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Dissolved inorganic phosphorus" means the sum of all inorganic phosphorus in solution (including phosphate, hydrogen phosphate, dihydrogen phosphate, and phosphoric acid). -->
+   <field id="CMIP6_po4os"         field_ref="dummy_XY" />  <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_phosphorus_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Dissolved inorganic phosphorus" means the sum of all inorganic phosphorus in solution (including phosphate, hydrogen phosphate, dihydrogen phosphate, and phosphoric acid). -->
+   <field id="CMIP6_pon"           field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_nitrogen_in_sea_water : sum of particulate organic nitrogen component concentrations -->
+   <field id="CMIP6_ponos"         field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_nitrogen_in_sea_water : sum of particulate organic nitrogen component concentrations -->
+   <field id="CMIP6_pop"           field_ref="dummy_XYO"        /> <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_phosphorus_in_sea_water : sum of particulate organic phosphorus component concentrations -->
+   <field id="CMIP6_popos"         field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_particulate_organic_matter_expressed_as_phosphorus_in_sea_water : sum of particulate organic phosphorus component concentrations -->
+   <field id="CMIP6_pp"            field_ref="TPP"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production : total primary (organic carbon) production by phytoplankton -->
+   <field id="CMIP6_ppcalc"        field_ref="dummy_XYO"        /> <!-- P3 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_calcareous_phytoplankton : Primary (organic carbon) production by calcareous phytoplankton components alone -->
+   <field id="CMIP6_ppdiat"        field_ref="PPPHY2"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_diatoms : Primary (organic carbon) production by diatom phytoplankton components alone -->
+   <field id="CMIP6_ppdiaz"        field_ref="dummy_XYO"        /> <!-- P3 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_diazotrophs : Primary (organic carbon) production by the diazotrophic phytoplankton component alone -->
+   <field id="CMIP6_ppmisc"        field_ref="PPPHY"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_miscellaneous_phytoplankton : Primary (organic carbon) production by other phytoplankton components alone -->
+   <field id="CMIP6_ppos"          field_ref="dummy_XY"         /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production : total primary (organic carbon) production by phytoplankton -->
+   <field id="CMIP6_pppico"        field_ref="dummy_XYO"        /> <!-- P3 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_picophytoplankton : Primary (organic carbon) production by the picophytoplankton (<2 um) component alone -->
+   <field id="CMIP6_remoc"         field_ref="REMIN"        /> <!-- P2 (mol m-3 s-1) tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_remineralization : "tendency_of_X" means derivative of X with respect to time. Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Remineralization is the degradation of organic matter into inorganic forms of carbon, nitrogen, phosphorus and other micronutrients, which consumes oxygen and releases energy. -->
+   <field id="CMIP6_si"            field_ref="Si"   >  Si * 1e-3 </field> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_silicon_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Dissolved inorganic silicon" means the sum of all inorganic silicon in solution (including silicic acid and its first dissociated anion SiO(OH)3-). -->
+   <field id="CMIP6_sios"          field_ref="dummy_XY" /> <!-- P1 (mol m-3) mole_concentration_of_dissolved_inorganic_silicon_in_sea_water : Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Dissolved inorganic silicon" means the sum of all inorganic silicon in solution (including silicic acid and its first dissociated anion SiO(OH)3-). -->
+   <field id="CMIP6_spco2"         field_ref="dummy_XY"   /> <!-- P1 (Pa) surface_partial_pressure_of_carbon_dioxide_in_sea_water : The surface called "surface" means the lower boundary of the atmosphere. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The chemical formula for carbon dioxide is CO2. -->
+   <field id="CMIP6_spco2abio"     field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_carbon_dioxide_abiotic_analogue_partial_pressure_difference_between_sea_water_and_air : The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. In ocean biogeochemistry models, an "abiotic analogue" is used to simulate the effect on a modelled variable when biological effects on ocean carbon concentration and alkalinity are ignored. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure difference between sea water and air is positive when the partial pressure of the dissolved gas in sea water is greater than the partial pressure in air. -->
+   <field id="CMIP6_spco2nat"      field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_carbon_dioxide_natural_analogue_partial_pressure_difference_between_sea_water_and_air : The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. In ocean biogeochemistry models, a "natural analogue" is used to simulate the effect on a modelled variable of imposing preindustrial atmospheric carbon dioxide concentrations, even when the model as a whole may be subjected to varying forcings. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure difference between sea water and air is positive when the partial pressure of the dissolved gas in sea water is greater than the partial pressure in air. -->
+   <field id="CMIP6_talk"          field_ref="Alkalini"  > Alkalini * 1e-3 </field>  <!-- P1 (mol m-3) sea_water_alkalinity_expressed_as_mole_equivalent : total alkalinity equivalent concentration (including carbonate, borate, phosphorus, silicon, and nitrogen components) -->
+   <field id="CMIP6_talknat"       field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) sea_water_alkalinity_natural_analogue_expressed_as_mole_equivalent : total alkalinity equivalent concentration (including carbonate, borate, phosphorus, silicon, and nitrogen components) at preindustrial atmospheric xCO2 -->
+   <field id="CMIP6_talknatos"     field_ref="dummy_XY"         /> <!-- P1 (mol m-3) sea_water_alkalinity_natural_analogue_expressed_as_mole_equivalent : total alkalinity equivalent concentration (including carbonate, borate, phosphorus, silicon, and nitrogen components) at preindustrial atmospheric xCO2 -->
+   <field id="CMIP6_talkos"          field_ref="dummy_XY" /> <!-- P1 (mol m-3) sea_water_alkalinity_expressed_as_mole_equivalent : total alkalinity equivalent concentration (including carbonate, borate, phosphorus, silicon, and nitrogen components) -->
+   <field id="CMIP6_zmeso"         field_ref="ZOO2"  > ZOO2 * 1e-3 </field>  <!-- P1 (mol m-3) mole_concentration_of_mesozooplankton_expressed_as_carbon_in_sea_water : carbon  concentration from mesozooplankton (20-200 um) component alone -->
+   <field id="CMIP6_zmesoos"       field_ref="dummy_XY" />   <!-- P2 (mol m-3) mole_concentration_of_mesozooplankton_expressed_as_carbon_in_sea_water : carbon  concentration from mesozooplankton (20-200 um) component alone -->
+   <field id="CMIP6_zmicro"        field_ref="ZOO"  > ZOO * 1e-3 </field>   <!-- P1 (mol m-3) mole_concentration_of_microzooplankton_expressed_as_carbon_in_sea_water : carbon  concentration from the microzooplankton (<20 um) component alone -->
+   <field id="CMIP6_zmicroos"      field_ref="dummy_XY" /> <!-- P2 (mol m-3) mole_concentration_of_microzooplankton_expressed_as_carbon_in_sea_water : carbon  concentration from the microzooplankton (<20 um) component alone -->
+   <field id="CMIP6_zmisc"         field_ref="dummy_XYO"        /> <!-- P1 (mol m-3) mole_concentration_of_miscellaneous_zooplankton_expressed_as_carbon_in_sea_water : carbon from additional zooplankton component concentrations alone (e.g. Micro, meso).  Since the models all have different numbers of components, this variable has been included to provide a check for intercomparison between models since some phytoplankton groups are supersets. -->
+   <field id="CMIP6_zmiscos"       field_ref="dummy_XY"         /> <!-- P2 (mol m-3) mole_concentration_of_miscellaneous_zooplankton_expressed_as_carbon_in_sea_water : carbon from additional zooplankton component concentrations alone (e.g. Micro, meso).  Since the models all have different numbers of components, this variable has been included to provide a check for intercomparison between models since some phytoplankton groups are supersets. -->
+   <field id="CMIP6_zo2min"        field_ref="ZO2MIN"         /> <!-- P1 (m) depth_at_shallowest_local_minimum_in_vertical_profile_of_mole_concentration_of_dissolved_molecular_oxygen_in_sea_water : Depth of vertical minimum concentration of dissolved oxygen gas (if two, then the shallower) -->
+   <field id="CMIP6_zooc"          field_ref="ZOO" > ZOO * 1e-3 + ZOO2 * 1e-3   </field>  <!-- P1 (mol m-3) mole_concentration_of_zooplankton_expressed_as_carbon_in_sea_water : sum of zooplankton carbon component concentrations -->
+   <field id="CMIP6_zoocos"        field_ref="dummy_XY" />  <!-- P2 (mol m-3) mole_concentration_of_zooplankton_expressed_as_carbon_in_sea_water : sum of zooplankton carbon component concentrations -->
+   <field id="CMIP6_zsatarag"      field_ref="dummy_XY"         /> <!-- P1 (m) minimum_depth_of_aragonite_undersaturation_in_sea_water : Depth of aragonite saturation horizon (0 if < surface, "missing"  if > bottom, if two, then the shallower) -->
+   <field id="CMIP6_zsatcalc"      field_ref="dummy_XY"         /> <!-- P1 (m) minimum_depth_of_calcite_undersaturation_in_sea_water : Depth of calcite saturation horizon (0 if < surface, "missing" if > bottom, if two, then the shallower) -->
+
+</field_group>
+</field_definition>
+</context>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_orchidee.xml
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_orchidee.xml	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/ping_orchidee.xml	(revision 5893)
@@ -0,0 +1,304 @@
+<context id="orchidee">
+<field_definition>
+<!-- field_ref="dummy" means that the corresponding output variable in ORCHIDEE has not yet been identified or coded.     -->
+<!-- for variables which realm equals one of _land-->
+   <field id="CMIP6_agesno"        field_ref="dummy_not_provided"         /> <!-- P1 (day) age_of_surface_snow : age_of_surface_snow -->
+   <field id="CMIP6_agesno"        field_ref="dummy_not_provided"         /> <!-- P1 (day) age_of_surface_snow : When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.  Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_albc"          field_ref="dummy_not_provided"         /> <!-- P1 (1) canopy_albedo : Canopy Albedo -->
+   <field id="CMIP6_albsn"         field_ref="albedo_snow"         /> <!-- P1 (1) snow_and_ice_albedo : Snow Albedo -->
+   <field id="CMIP6_areacella"     field_ref="areas"         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report atmospheric variables and any other variable using that grid (e.g., soil moisture content). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_areacellg"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m2) cell_area : Cell areas any grid used to report ice sheet variables. These cell areas should be defined to enable exact calculation of area integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere) -->
+   <field id="CMIP6_areacellr"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report river model variables (may be the same as for atmospheric variables). These cell areas should be defined to enable exact calculation of area integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_ares"          field_ref="raero"         /> <!-- P1 (s m-1) aerodynamic_resistance : aerodynamic_resistance -->
+   <field id="CMIP6_baresoilFrac"  field_ref="baresoilFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by bare soil. Warning: we do not include the bare soil fraction from the vegetated pft's. Note: Multiplied in sechiba by contfrac because we need entire grid-cell -->
+   <field id="CMIP6_burntFractionAll" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : Percentage of grid cell burned due to all fires including natural and anthropogenic fires and those associated with anthropogenic land use change -->
+   <field id="CMIP6_c13Land"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) total_land_c13 : Mass of 13C in all terrestrial carbon pools -->
+   <field id="CMIP6_c13Litter"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_c13_content : Mass of 13C in Litter Pool -->
+   <field id="CMIP6_c13Soil"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_c13_content : Mass of 13C in Soil Pool -->
+   <field id="CMIP6_c13Veg"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_c13_content : Mass of 13C in Vegetation -->
+   <field id="CMIP6_c14Land"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) total_land_c14 : Mass of 14C in all terrestrial carbon pools -->
+   <field id="CMIP6_c14Litter"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_c14_content : Mass of 14C in Litter Pool -->
+   <field id="CMIP6_c14Soil"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_c14_content : Mass of 14C in Soil Pool -->
+   <field id="CMIP6_c14Veg"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_c14_content : only requested for DECK HIST -->
+   <field id="CMIP6_c3PftFrac"     field_ref="c3PftFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by C3 PFTs (including grass, crops, and trees). -->
+   <field id="CMIP6_c4PftFrac"     field_ref="c4PftFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by C4 PFTs (including grass and crops). -->
+   <field id="CMIP6_cCwd"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) wood_debris_carbon_content : Carbon Mass in Coarse Woody Debris -->
+   <field id="CMIP6_cLand"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) total_land_carbon : Total Carbon in All Terrestrial Carbon Pools -->
+   <field id="CMIP6_cLeaf"         field_ref="cLeaf"         /> <!-- P1 (kg m-2) leaf_carbon_content : Carbon Mass in Leaves -->
+   <field id="CMIP6_cLitter"       field_ref="cLitter"         /> <!-- P1 (kg m-2) litter_carbon_content : Carbon Mass in Litter Pool -->
+   <field id="CMIP6_cLitterAbove"  field_ref="cLitterAbove"         /> <!-- P1 (kg m-2) surface_litter_carbon_content : Carbon Mass in Above-Ground Litter -->
+   <field id="CMIP6_cLitterBelow"  field_ref="cLitterBelow"         /> <!-- P1 (kg m-2) subsurface_litter_carbon_content : Carbon Mass in Below-Ground Litter -->
+   <field id="CMIP6_cLitterCwd"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_wood_debris_carbon_content : Carbon Mass in Coarse Woody Debris -->
+   <field id="CMIP6_cLitterGrass"  field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on grass tiles -->
+   <field id="CMIP6_cLitterLut"    field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) litter_carbon_content : carbon  in above and belowground litter pools on land use tiles -->
+   <field id="CMIP6_cLitterShrub"  field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on shrub tiles -->
+   <field id="CMIP6_cLitterSubSurf" field_ref="cLitterBelow"         /> <!-- P2 (kg m-2) subsurface_litter_carbon_content : Carbon Mass in Below-Ground Litter Warning: Duplicate of CMIP6_cLitterBelow -->
+   <field id="CMIP6_cLitterSurf"   field_ref="cLitterAbove"         /> <!-- P2 (kg m-2) surface_litter_carbon_content : Carbon Mass in Above-Ground Litter Warning: Duplicate of CMIP6_cLitterAbove -->
+   <field id="CMIP6_cLitterTree"   field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on tree tiles -->
+   <field id="CMIP6_cMisc"         field_ref="cMisc"         /> <!-- P2 (kg m-2) miscellaneous_living_matter_carbon_content : Carbon Mass in Other Living Compartments on Land -->
+   <field id="CMIP6_cOther"        field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) other_vegegtation_components_carbon_content : Carbon Mass in Vegetation Components other than Leaves, Stems and Roots -->
+   <field id="CMIP6_cProduct"      field_ref="cProduct"         /> <!-- P1 (kg m-2) carbon_content_of_products_of_anthropogenic_land_use_change : Carbon Mass in Products of Land Use Change -->
+   <field id="CMIP6_cProductLut"   field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) carbon_content_in_wood_and_agricultural_products : wood and agricultural product pool carbon associated with land use tiles; examples of products include paper, cardboard, timber for construction, and crop harvest for food or fuel. -->
+   <field id="CMIP6_cRoot"         field_ref="cRoot"         /> <!-- P1 (kg m-2) root_carbon_content : including fine and coarse roots. -->
+   <field id="CMIP6_cSoil"         field_ref="cSoil"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon Mass in Soil Pool -->
+   <field id="CMIP6_cSoilAbove1m"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon mass in soil pool above 1m depth -->
+   <field id="CMIP6_cSoilFast"     field_ref="cSoilFast"         /> <!-- P1 (kg m-2) fast_soil_pool_carbon_content : fast is meant as lifetime of less than 10 years for  reference climate conditions (20 C, no water limitations). -->
+   <field id="CMIP6_cSoilGrass"    field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on grass tiles -->
+   <field id="CMIP6_cSoilLevels"   field_ref="dummy_XYSo_not_provided"       /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in each model soil level (summed over all soil carbon pools in that level) -->
+   <field id="CMIP6_cSoilLut"      field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) soil_carbon_content : carbon  in soil pool on land use tiles -->
+   <field id="CMIP6_cSoilMedium"   field_ref="cSoilMedium"         /> <!-- P1 (kg m-2) medium_soil_pool_carbon_content : medium is meant as lifetime of more than than 10 years and less than 100 years for  reference climate conditions (20 C, no water limitations) -->
+   <field id="CMIP6_cSoilPools"    field_ref="dummy_not_provided"/> <!-- P2 (kg m-2) soil_carbon_content_by_pool : Carbon mass in each model soil pool (summed over vertical levels) -->
+   <field id="CMIP6_cSoilShrub"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on shrub tiles -->
+   <field id="CMIP6_cSoilSlow"     field_ref="cSoilSlow"         /> <!-- P1 (kg m-2) slow_soil_pool_carbon_content : fast is meant as lifetime of more than 100 years for  reference climate conditions (20 C, no water limitations) -->
+   <field id="CMIP6_cSoilTree"     field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on tree tiles -->
+   <field id="CMIP6_cStem"         field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) stem_carbon_content : Carbon Mass in Stem -->
+   <field id="CMIP6_cTotFireLut"   field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (kg m-2 s-1)  : Total carbon loss from natural and managed fire on land use tile, including deforestation fires -->
+   <field id="CMIP6_cVeg"          field_ref="cVeg"         /> <!-- P1 (kg m-2) vegetation_carbon_content : Carbon Mass in Vegetation -->
+   <field id="CMIP6_cVegGrass"     field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on grass tiles -->
+   <field id="CMIP6_cVegLut"       field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) vegetation_carbon_content : carbon in vegetation on land use tiles -->
+   <field id="CMIP6_cVegShrub"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on shrub tiles -->
+   <field id="CMIP6_cVegTree"      field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on tree tiles -->
+   <field id="CMIP6_cWood"         field_ref="cWood"         /> <!-- P2 (kg m-2) wood_carbon_content : Carbon Mass in Wood -->
+   <field id="CMIP6_clayfrac"      field_ref="dummy_not_provided"       /> <!-- P1 (1) volume_fraction_of_clay_in_soil : Clay Fraction -->
+   <field id="CMIP6_cnc"           field_ref="dummy_not_provided"         /> <!-- P1 (%) vegetation_area_fraction : Canopy covered fraction Warning: fraction over total land -->
+   <field id="CMIP6_cropFrac"      field_ref="cropFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by crop. Warning: Note: Multiplied in sechiba by contfrac because we need entire grid-cell -->
+   <field id="CMIP6_cropFracC3"    field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Percentage Cover by C3 Crops -->
+   <field id="CMIP6_cropFracC4"    field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Percentage Cover by C4 Crops -->
+   <field id="CMIP6_cw"            field_ref="qsintveg_tot"         /> <!-- P1 (kg m-2) canopy_water_amount : canopy_water_amount -->
+   <field id="CMIP6_dcw"           field_ref="delintercept"         /> <!-- P1 (kg m-2) change_over_time_in_canopy_water_amount : change_over_time_in_canopy_water_amount -->
+   <field id="CMIP6_dgw"           field_ref="delslowr"         /> <!-- P1 (kg m-2) change_over_time_in_groundwater : change_over_time_in_groundwater Warning: It can be either undef or delslowr. We take the second option for the moment. -->
+   <field id="CMIP6_dmlt"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_subsurface_melting : depth_of_subsurface_melting -->
+   <field id="CMIP6_drivw"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) change_over_time_in_river_water_amount : change_over_time_in_river_water_amount Warning: we sum the stream and fast reservoir of the routing scheme. -->
+   <field id="CMIP6_dslw"          field_ref="delsoilmoist"         /> <!-- P1 (kg m-2) change_over_time_in_water_content_of_soil_layer : change_over_time_in_water_content_of_soil_layer -->
+   <field id="CMIP6_dsn"           field_ref="delswe"         /> <!-- P1 (kg m-2) change_over_time_in_surface_snow_and_ice_amount : change_over_time_in_surface_snow_and_ice_amount -->
+   <field id="CMIP6_dsw"           field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) change_over_time_in_surface_water_amount : change_over_time_in_surface_water_amount Warning: includes the fast reservoire -->
+   <field id="CMIP6_dtes"          field_ref="dummy_not_provided"         /> <!-- P1 (J m-2) change_over_time_in_thermal_energy_content_of_surface : Change in surface heat storage -->
+   <field id="CMIP6_dtesn"         field_ref="dummy_not_provided"         /> <!-- P1 (J m-2) change_over_time_in_thermal_energy_content_of_surface_snow_and_ice : Change in snow/ice cold content Warning: Computed only for the layered scheme on vegetated and bare soil area -->
+   <field id="CMIP6_ec"            field_ref="evspsblveg"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_canopy : liquid_water_evaporation_flux_from_canopy -->
+   <field id="CMIP6_eow"           field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_open_water : liquid_water_evaporation_flux_from_open_water -->
+   <field id="CMIP6_es"            field_ref="vevapnu"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_soil : liquid_water_evaporation_flux_from_soil -->
+   <field id="CMIP6_esn"           field_ref="vevapsno"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_surface_snow : liquid_water_evaporation_flux_from_surface_snow -->
+   <field id="CMIP6_evspsbl"       field_ref="vevapp"         /> <!-- P1 (kg m-2 s-1) surface_evapotranspiration : surface_evapotranspiration -->
+   <field id="CMIP6_evspsblpot"    field_ref="evapot"         /> <!-- P1 (kg m-2 s-1) water_potential_evaporation_flux : Potential Evapotranspiration -->
+   <field id="CMIP6_evspsblsoi"    field_ref="evspsblsoi"         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux_from_soil : includes sublimation. -->
+   <field id="CMIP6_evspsblveg"    field_ref="evspsblveg"         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux_from_canopy : the canopy evaporation+sublimation (if present in model). Warning: No sublimation here for Orchidee -->
+   <field id="CMIP6_fAnthDisturb"  field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_anthrogpogenic_emission : carbon mass flux into atmosphere due to any human activity -->
+   <field id="CMIP6_fBNF"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) biological_nitrogen_fixation : biological nitrogen fixation -->
+   <field id="CMIP6_fCLandToOcean" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_ocean_from_rivers : Lateral transfer of carbon out of gridcell that eventually goes into ocean -->
+   <field id="CMIP6_fDeforestToAtmos" field_ref="fLuc"         /> <!-- P2 (kg m-2 s-1) surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change : Deforested biomass that goes into atmosphere as a result of anthropogenic land use change Warning : duplicate of variable fLuc -->
+   <field id="CMIP6_fDeforestToProduct" field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) deforested_biomass_into_product_pool_due_to_anthorpogenic_land_use_change : Deforested biomass that goes into product pool as a result of anthropogenic land use change -->
+   <field id="CMIP6_fFire"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fires_excluding_anthropogenic_land_use_change : CO2 emissions (expressed as a carbon mass flux) from natural fires + human ignition fires as calculated by the fire module of the DGVM, but excluding any CO2 flux from fire included in fLuc, defined below (CO2 Flux to Atmosphere from Land Use Change). -->
+   <field id="CMIP6_fFireAll"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_all_sources : Carbon Mass Flux into Atmosphere due to CO2 emissions from Fire resulting from all sources including natural, anthropogenic and land use change. -->
+   <field id="CMIP6_fFireNat"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) fire_CO2_emissions_from_wildfire : Carbon Mass Flux into Atmosphere due to CO2 Emission from natural Fire -->
+   <field id="CMIP6_fGrazing"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_grazing : Carbon Mass Flux into Atmosphere due to Grazing on Land -->
+   <field id="CMIP6_fHarvest"      field_ref="fHarvest"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting : Carbon Mass Flux into Atmosphere due to Crop Harvesting -->
+   <field id="CMIP6_fHarvestToAtmos" field_ref="fHarvest"         /> <!-- P2 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting : Harvested biomass that goes straight into atmosphere Warning : Duplicate variable fHarvest -->
+   <field id="CMIP6_fHarvestToProduct" field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) harvested_biomass_into_product_pool : Harvested biomass that goes into product pool -->
+   <field id="CMIP6_fLitterFire"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_litter_carbon : Carbon Mass Flux from Litter, CWD or any non-living pool into Atmosphere due to CO2 Emission from all Fire -->
+   <field id="CMIP6_fLitterSoil"   field_ref="fLitterSoil"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_from_litter : Total Carbon Mass Flux from Litter to Soil -->
+   <field id="CMIP6_fLuc"          field_ref="fLuc"         /> <!-- P1 (kg m-2 s-1) surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change : Net Carbon Mass Flux into Atmosphere due to Land Use Change -->
+   <field id="CMIP6_fLulccAtmLut"  field_ref="dummy_not_provided" /> <!-- P1 (kg s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_direct_to_atmosphere_due_to_anthropogenic_land_use_land_cover_change : carbon transferred directly to atmosphere due to any land-use or land-cover change activities including deforestation or agricultural fire -->
+   <field id="CMIP6_fLulccProductLut" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_wood_and_agricultural_product_pools_due_to_anthropogenic_land_use_or_land_cover_change : carbon harvested due to land-use or land-cover change process that enters anthropogenic product pools on tile -->
+   <field id="CMIP6_fLulccResidueLut" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_and_litter_due_to_anthropogenic_land_use_or_land_cover_change : carbon transferred to soil or litter pools due to land-use or land-cover change processes on tile -->
+   <field id="CMIP6_fN2O"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_net_n2o_flux : Total land N2O flux -->
+   <field id="CMIP6_fNAnthDisturb" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_flux_into_atmos_due_to_direct_human_disturbance : nitrogen mass flux out of land due to any human activity -->
+   <field id="CMIP6_fNLandToOcean" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_ocean_from_rivers : Lateral transfer of nitrogen out of gridcell that eventually goes into ocean -->
+   <field id="CMIP6_fNLitterSoil"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_soil_from_litter : Total Nitrogen Mass Flux from Litter to Soil -->
+   <field id="CMIP6_fNOx"          field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_net_nox_flux : Total land NOx flux -->
+   <field id="CMIP6_fNProduct"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_to_product_pool_due_to_anthorpogenic_activity : Deforested or harvested biomass as a result of anthropogenic land use or change -->
+   <field id="CMIP6_fNVegLitter"   field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) litter_nitrogen_flux : Total Nitrogen Mass Flux from Vegetation to Litter -->
+   <field id="CMIP6_fNVegSoil"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_soil_from_vegetation_excluding_litter : Total Nitrogen Mass Flux from Vegetation Directly to Soil -->
+   <field id="CMIP6_fNdep"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) deposition_of_nitrogen_onto_land : Dry and Wet Deposition of Reactive Nitrogen onto Land -->
+   <field id="CMIP6_fNfert"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) fertiliser_of_nitrogen_onto_land : total N added for cropland fertilisation (artificial and manure) -->
+   <field id="CMIP6_fNgas"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere : Total Nitrogen lost to the atmosphere (sum of NHx, NOx, N2O, N2) -->
+   <field id="CMIP6_fNgasFire"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere_due_to_fire : Total N lost to the atmosphere (including NHx, NOx, N2O, N2) from fire. -->
+   <field id="CMIP6_fNgasNonFire"  field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere_not_due_to_fire : Total N lost to the atmosphere (including NHx, NOx, N2O, N2) from all processes except fire. -->
+   <field id="CMIP6_fNleach"       field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost_to_leaching : Total N loss to leaching or runoff (sum of ammonium, nitrite and nitrate) -->
+   <field id="CMIP6_fNloss"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost : Total N lost (including NHx, NOx, N2O, N2 and leaching) -->
+   <field id="CMIP6_fNnetmin"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) net_nitrogen_mineralisation : Net nitrogen release from soil and litter as the outcome of nitrogen immobilisation and gross mineralisation -->
+   <field id="CMIP6_fNup"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) plant_nitrogen_uptake : total plant nitrogen uptake (sum of ammonium and nitrate), irrespective of the source of nitrogen -->
+   <field id="CMIP6_fProductDecomp" field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) Carbon_flux_out_of_storage_product_pools_into_atmos : decomposition out of product pools to CO2 in atmos Warning Duplicated variable with fDeforestToProduct -->
+   <field id="CMIP6_fProductDecompLut" field_ref="dummy_not_provided" /> <!-- P1 (kg s-1) tendency_of_atmospheric_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_wood_and_agricultural_product_pool : flux from wood and agricultural product pools on land use tile into atmosphere -->
+   <field id="CMIP6_fVegFire"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_vegetation_carbon : Carbon Mass Flux from Vegetation into Atmosphere due to CO2 Emission from all Fire -->
+   <field id="CMIP6_fVegLitter"    field_ref="fVegLitter"         /> <!-- P1 (kg m-2 s-1) litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter -->
+   <field id="CMIP6_fVegLitterMortality" field_ref="dummy_XY_not_provided"   /> <!-- P2 (kg m-2 s-1) mortality_litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter as a Result of Mortality -->
+   <field id="CMIP6_fVegLitterSenescence" field_ref="dummy_XY_not_provided"  /> <!-- P2 (kg m-2 s-1) senescence_litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter as a Result of Leaf, Branch, and Root Senescence -->
+   <field id="CMIP6_fVegSoil"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_from_vegetation_excluding_litter : In some models part of carbon (e.g., root exudate) can go directly into the soil pool without entering litter. -->
+   <field id="CMIP6_fVegSoilMortality" field_ref="dummy_XY_not_provided"     /> <!-- P2 (kg m-2 s-1) mortality_vegtosoil_carbon_flux : Total Carbon Mass Flux from Vegetation to Soil as a result of mortality -->
+   <field id="CMIP6_fVegSoilSenescence" field_ref="dummy_XY_not_provided"    /> <!-- P2 (kg m-2 s-1) senescence_vegtosoil_carbon_flux : Total Carbon Mass Flux from Vegetation to Soil as a result of leaf, branch, and root senescence -->
+   <field id="CMIP6_fahLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_heat_flux_due_to_anthropogenic_energy_consumption : Anthropogenic heat flux generated from non-renewable human primary energy consumption, including energy use by vehicles, commercial and residential buildings, industry, and power plants.  Primary energy refers to energy in natural resources, fossil and nonfossil, before conversion into other forms, such as electricity. -->
+   <field id="CMIP6_fldcapacity"   field_ref="dummy_not_provided"       /> <!-- P1 (%) volume_fraction_of_condensed_water_in_soil_at_field_capacity : Field Capacity -->
+   <field id="CMIP6_fracInLut"     field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (%) area_fraction : annual gross fraction that was transferred into this tile from other land use tiles -->
+   <field id="CMIP6_fracLut"       field_ref="dummy_not_provided" /> <!-- P1 (%) area_fraction : fraction of grid cell for each land use tile -->
+   <field id="CMIP6_fracOutLut"    field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (%) area_fraction : annual gross fraction of land use tile  that was transferred into other land use tiles -->
+   <field id="CMIP6_gpp"           field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : only requested for DECK HIST, 1980-present -->
+   <field id="CMIP6_gppGrass"      field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on grass tiles -->
+   <field id="CMIP6_gppLut"        field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary productivity on land use tile -->
+   <field id="CMIP6_gppShrub"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on Shrub tiles -->
+   <field id="CMIP6_gppTree"       field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on tree tiles -->
+   <field id="CMIP6_gppc13"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_c13 : Mass Flux of 13C out of Atmosphere due to Gross Primary Production on Land -->
+   <field id="CMIP6_gppc14"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_c14 : Mass Flux of 14C out of Atmosphere due to Gross Primary Production on Land -->
+   <field id="CMIP6_grassFrac"     field_ref="grassFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell that is covered by natural grass. -->
+   <field id="CMIP6_grassFracC3"   field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : C3 grass Area Percentage -->
+   <field id="CMIP6_grassFracC4"   field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : C4 grass Area Percentage -->
+   <field id="CMIP6_hfdsn"         field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_downward_heat_flux_in_snow : the net downward heat flux from the atmosphere into the snow that lies on land divided by the land area in the grid cell; reported as missing for snow-free land regions or where the land fraction is 0. -->
+   <field id="CMIP6_hfls"          field_ref="fluxlat"           /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_hflsLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : latent heat flux on land use tile -->
+   <field id="CMIP6_hfss"          field_ref="fluxsens"          /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type.  Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies. -->
+   <field id="CMIP6_hfssLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : sensible heat flux on land use tile -->
+   <field id="CMIP6_hussLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (1) specific_humidity : near-surface specific humidity on land use tile -->
+   <field id="CMIP6_irrLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (kg s-1) surface_downward_water_flux_due_to_irrigation : Irrigation flux including any irrigation for crops, trees, pasture, or urban lawns -->
+   <field id="CMIP6_ksat"          field_ref="dummy_not_provided"       /> <!-- P1 (1e-6 m s-1)  : Saturated Hydraulic Conductivity -->
+   <field id="CMIP6_lai"           field_ref="lai_ipcc"         /> <!-- P1 (1) leaf_area_index : a ratio obtained by dividing the total upper leaf surface area of vegetation by the (horizontal) surface area of the land on which it grows. Warning: here we take the average over the entire land fraction; not sure it's ok with the DataRequest comment "a ratio obtained by dividing the total upper leaf surface area of vegetation by the (horizontal) surface area of the land on which it grows." PC+JG : lai_ipcc and laimean are related to the same land fraction(note veget_max in stomate_lpj is not the same veget_max in sechiba!). We see other differencies between these output variables coming mainly from pft3 and some from 6,8,9,12. -->
+   <field id="CMIP6_laiLut"        field_ref="dummy_not_provided" /> <!-- P1 (1)  : Leaf Area Index on Land Use Tile -->
+   <field id="CMIP6_landCoverFrac" field_ref="landCoverFrac" /> <!-- P1 (%) area_fraction : The categories may differ from model to model, depending on their  PFT definitions.   This may include natural PFTs, anthropogenic PFTs, bare soil, lakes, urban areas, etc.   Sum of all should equal the fraction of the grid-cell that is land. Warning: Note: here not multiplying by contfrac according to DR -->
+   <field id="CMIP6_lwsnl"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) liquid_water_content_of_snow_layer : where land over land: this is computed as the total mass of liquid water contained interstitially within the snow layer of the land portion of a grid cell divided by the area of the land portion of the cell. Warning: Computed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_mrfso"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) soil_frozen_water_content : the mass (summed over all all layers) of frozen water. Warning: To be calculated. -->
+   <field id="CMIP6_mrfsofr"       field_ref="profil_froz_hydro"       /> <!-- P1 (1) mass_fraction_of_frozen_water_in_soil_moisture : mass_fraction_of_frozen_water_in_soil_layer -->
+   <field id="CMIP6_mrlqso"        field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_unfrozen_water_in_soil_moisture : mass_fraction_of_unfrozen_water_in_soil_layer -->
+   <field id="CMIP6_mrlso"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) soil_liquid_water_content : Soil Liquid Water Content -->
+   <field id="CMIP6_mrro"          field_ref="mrro"         /> <!-- P1 (kg m-2 s-1) runoff_flux : the total runoff (including "drainage" through the base of the soil model) leaving the land portion of the grid cell divided by the land area in the grid cell, averaged over the 3-hour interval. -->
+   <field id="CMIP6_mrroLi"        field_ref="dummy_XY_not_provided"  /> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Runoff flux over land ice is the difference between any available liquid water in the snowpack less any refreezing. Computed as the sum of rainfall and melt of snow or ice less any refreezing or water retained in the snowpack -->
+   <field id="CMIP6_mrroLut"       field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) runoff_flux : Total runoff from land use tile -->
+   <field id="CMIP6_mrrob"         field_ref="drainage"         /> <!-- P1 (kg m-2 s-1) subsurface_runoff_flux : subsurface_runoff_flux -->
+   <field id="CMIP6_mrros"         field_ref="runoff"         /> <!-- P1 (kg m-2 s-1) surface_runoff_flux : surface_runoff_flux -->
+   <field id="CMIP6_mrsfl"         field_ref="dummy_not_provided"       /> <!-- P1 (kg m-2) frozen_moisture_content_of_soil_layer : Frozen water content of soil layer -->
+   <field id="CMIP6_mrsll"         field_ref="dummy_not_provided"       /> <!-- P1 (kg m-2) liquid_moisture_content_of_soil_layer : Liquid water content of soil layer -->
+   <field id="CMIP6_mrso"          field_ref="humtot"         /> <!-- P1 (kg m-2) soil_moisture_content : the mass per unit area  (summed over all soil layers) of water in all phases. -->
+   <field id="CMIP6_mrsoLut"       field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) soil_moisture_content : Total soil moisture -->
+   <field id="CMIP6_mrsofc"        field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) soil_moisture_content_at_field_capacity : reported "where land": divide the total water holding capacity of all the soil in the grid cell by the land area in the grid cell;  reported as "missing" where the land fraction is 0. -->
+   <field id="CMIP6_mrsol"         field_ref="dummy_not_provided"       /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : Total water content of soil layer -->
+   <field id="CMIP6_mrsos"         field_ref="humtot_top"         /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : the mass of water in all phases in a thin surface soil layer. -->
+   <field id="CMIP6_mrsosLut"      field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : Moisture in Upper Portion of Soil Column of land use tile -->
+   <field id="CMIP6_mrsow"         field_ref="dummy_not_provided"         /> <!-- P1 (1) volume_fraction_of_condensed_water_in_soil_at_field_capacity : relative_soil_moisture_content_above_field_capacity Warning: weird mention to field capacity in the description, overlooked. AD: 3 differents definintions, we do not know what to do -->
+   <field id="CMIP6_mrtws"         field_ref="tws"         /> <!-- P1 (kg m-2) total_water_storage : canopy_and_surface_and_subsurface_water_amount -->
+   <field id="CMIP6_nLand"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) total_land_nitrogen : Total nitrogen in all terrestrial nitrogen pools -->
+   <field id="CMIP6_nLeaf"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) leaf_nitrogen_content : Nitrogen Mass in Leaves -->
+   <field id="CMIP6_nLitter"       field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) litter_nitrogen_content : Nitrogen Mass in Litter Pool -->
+   <field id="CMIP6_nLitterCwd"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_wood_debris_nitrogen_content : Nitrogen Mass in Coarse Woody Debris -->
+   <field id="CMIP6_nLitterSubSurf" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) subsurface_litter_nitrogen_content : Nitrogen Mass in below ground litter (non CWD) -->
+   <field id="CMIP6_nLitterSurf"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) surface_litter_nitrogen_content : Nitrogen Mass in above ground litter (non CWD) -->
+   <field id="CMIP6_nMineral"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) mineral_soil_nitrogen_content : Mineral nitrogen in the soil -->
+   <field id="CMIP6_nMineralNH4"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) mineral_nh4_soil_nitrogen_content : Mineral ammonium in the soil -->
+   <field id="CMIP6_nMineralNO3"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) mineral_no3_soil_nitrogen_content : Mineral nitrate in the soil -->
+   <field id="CMIP6_nOther"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) other_vegegtation_components_nitrogen_content : Nitrogen mass in vegetation components other than leaves, stem and root -->
+   <field id="CMIP6_nProduct"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) nitrogen_content_of_products_of_anthropogenic_land_use_change : Nitrogen Mass in Products of Land Use Change -->
+   <field id="CMIP6_nRoot"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) root_nitrogen_content : Nitrogen Mass in Roots -->
+   <field id="CMIP6_nSoil"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_nitrogen_content : Nitrogen Mass in Soil Pool -->
+   <field id="CMIP6_nStem"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) stem_nitrogen_content : Nitrogen Mass in Stem -->
+   <field id="CMIP6_nVeg"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) vegetation_nitrogen_content : Nitrogen Mass in Vegetation -->
+   <field id="CMIP6_nbp"           field_ref="nbp"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : This is the net mass flux of carbon between land and atmosphere calculated as photosynthesis MINUS the sum of  plant and soil respiration, carbonfluxes  from fire, harvest, grazing  and land use change. Positive flux  is into the land. -->
+   <field id="CMIP6_necbLut"       field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : net rate of C accumulation (or loss) on land use tile -->
+   <field id="CMIP6_nep"           field_ref="nep"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change : Net Ecosystem Exchange -->
+   <field id="CMIP6_netAtmosLandC13Flux" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_atmos_to_land_C13_flux : Net Mass Flux of 13C between atmosphere and land (positive into land) as a result of all processes. -->
+   <field id="CMIP6_netAtmosLandC14Flux" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_atmos_to_land_C14_flux : Net Mass Flux of 14C between atmosphere and land (positive into land) as a result of all processes. -->
+   <field id="CMIP6_netAtmosLandCO2Flux" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : Net flux of CO2 between atmosphere and land (positive into land) as a result of all processes. Warning: Could be done in Orchidee but not considered as a priority  -->
+   <field id="CMIP6_npp"           field_ref="npp_ipcc"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : Carbon Mass Flux out of Atmosphere due to Net Primary Production on Land -->
+   <field id="CMIP6_nppGrass"      field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on grass tiles -->
+   <field id="CMIP6_nppLeaf"       field_ref="nppLeaf"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_leaves : This is the rate of carbon uptake by leaves due to NPP -->
+   <field id="CMIP6_nppLut"        field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary productivity on land use tile -->
+   <field id="CMIP6_nppOther"      field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_production_allocated_to_other : net primary production allcoated to other pools (not leaves stem or roots) -->
+   <field id="CMIP6_nppRoot"       field_ref="nppRoot"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_roots : This is the rate of carbon uptake by roots due to NPP -->
+   <field id="CMIP6_nppShrub"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on Shrub tiles -->
+   <field id="CMIP6_nppStem"       field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_production_allocated_to_stem : net primary production allcoated to stem -->
+   <field id="CMIP6_nppTree"       field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on tree tiles -->
+   <field id="CMIP6_nppWood"       field_ref="nppWood"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_wood : This is the rate of carbon uptake by wood due to NPP -->
+   <field id="CMIP6_nudgincsm"     field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) nudging_increment_in_water_content_of_soil_layer : nudging_increment_in_water_content_of_soil_layer -->
+   <field id="CMIP6_nudgincswe"    field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) nudging_increment_in_surface_snow_and_ice_amount : nudging_increment_in_surface_snow_and_ice_amount -->
+   <field id="CMIP6_nwdFracLut"    field_ref="dummy_not_provided" /> <!-- P1 (%)  : fraction of land use tile tile that is non-woody vegetation ( e.g. herbaceous crops) -->
+   <field id="CMIP6_orog"          field_ref="dummy_XY"         /> <!-- P1 (m) surface_altitude : Surface Altitude -->
+   <field id="CMIP6_orog_ist"      field_ref="dummy_XY"         /> <!-- P1 (m) surface_altitude : This is needed in case the ice sheet elevation changes in time -->
+   <field id="CMIP6_pastureFrac"   field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by anthropogenic pasture. -->
+   <field id="CMIP6_pastureFracC3" field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) area_fraction : C3 Pasture Area Percentage -->
+   <field id="CMIP6_pastureFracC4" field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) area_fraction : C4 Pasture Area Percentage -->
+   <field id="CMIP6_pflw"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) liquid_water_content_of_permafrost_layer : "where land over land", i.e., this is the total mass of liquid water contained within the permafrost layer within the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_prra"          field_ref="precip_rain"      /> <!-- P1 (kg m-2 s-1) rainfall_flux : over Land Ice//quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prsn"          field_ref="precip_snow"      /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prveg"         field_ref="prveg"         /> <!-- P1 (kg m-2 s-1) precipitation_flux_onto_canopy : the precipitation flux that is intercepted by the vegetation canopy (if present in model) before reaching the ground. -->
+   <field id="CMIP6_qgwr"          field_ref="drainage"         /> <!-- P1 (kg m-2 s-1) water_flux_from_soil_layer_to_groundwater : water_flux_from_soil_layer_to_groundwater Warning: It can be either undef or drainage. We take the second option for the moment. -->
+   <field id="CMIP6_rGrowth"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_growth : Carbon Mass Flux into Atmosphere due to Growth Autotrophic Respiration on Land Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_rMaint"        field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_maintenance : Carbon Mass Flux into Atmosphere due to Maintenance Autotrophic Respiration on Land Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_ra"            field_ref="ra"         /> <!-- P1 (kg m-2 s-1) plant_respiration_carbon_flux : only requested for DECK HIST, 1980-present Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_raGrass"       field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on grass tiles -->
+   <field id="CMIP6_raLeaf"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_leaves : Total respiration from leaves -->
+   <field id="CMIP6_raLut"         field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) plant_respiration_carbon_flux : plant respiration on land use tile -->
+   <field id="CMIP6_raOther"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration : Total respiration from other pools (not leaves stem or roots) -->
+   <field id="CMIP6_raRoot"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_roots : Total Respiration from Roots -->
+   <field id="CMIP6_raShrub"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on Shrub tiles -->
+   <field id="CMIP6_raStem"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_stem : Total Respiration from Stem -->
+   <field id="CMIP6_raTree"        field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on tree tiles -->
+   <field id="CMIP6_rac13"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_c13_flux : Mass Flux of 13C into Atmosphere due to Autotrophic (Plant) Respiration on Land -->
+   <field id="CMIP6_rac14"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_c14_flux : Mass Flux of 14C into Atmosphere due to Autotrophic (Plant) Respiration on Land -->
+   <field id="CMIP6_residualFrac"  field_ref="residualFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is land and is covered by "non-vegetation" and "non-bare-soil" (e.g., urban, ice, lakes, etc.) -->
+   <field id="CMIP6_rh"            field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration on Land Warning:  Issue with duplicated variables resp_hetero from sechiba and stomate but they are calculated differently. We here need the sechiba variable for 3h freq output. -->
+   <field id="CMIP6_rhGrass"       field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on grass tiles -->
+   <field id="CMIP6_rhLitter"      field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux_from_litter : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration from Litter on Land -->
+   <field id="CMIP6_rhLut"         field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : soil heterotrophic respiration on land use tile -->
+   <field id="CMIP6_rhShrub"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on Shrub tiles -->
+   <field id="CMIP6_rhSoil"        field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux_from_soil : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration from Soil on Land -->
+   <field id="CMIP6_rhTree"        field_ref="dummy_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on tree tiles -->
+   <field id="CMIP6_rhc13"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_c13_flux : Mass Flux of 13C into Atmosphere due to Heterotrophic Respiration on Land -->
+   <field id="CMIP6_rhc14"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_c14_flux : Mass Flux of 14C into Atmosphere due to Heterotrophic Respiration on Land -->
+   <field id="CMIP6_rivi"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (m3 s-1) water_flux_from_upstream : water_flux_to_downstream -->
+   <field id="CMIP6_rivo"          field_ref="hydrographs"         /> <!-- P1 (m3 s-1) water_flux_to_downstream : water_flux_from_upstream -->
+   <field id="CMIP6_rlds"          field_ref="lwdown"           /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_rlus"          field_ref="lwdown"    >   lwdown - lwnet </field> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_rlusLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave on Land Use Tile -->
+   <field id="CMIP6_rootd"         field_ref="dummy_not_provided"         /> <!-- P1 (m) root_depth : report the maximum soil depth reachable by plant roots (if defined in model), i.e., the maximum soil depth from which they can extract moisture; report as "missing" where the land fraction is 0. -->
+   <field id="CMIP6_rootdsl"       field_ref="dummy_XYSo"       /> <!-- P1 (kg m-2) root_mass_content_of_carbon : Root Distribution -->
+   <field id="CMIP6_rsds"          field_ref="swdown"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : surface solar irradiance for UV calculations -->
+   <field id="CMIP6_rsus"          field_ref="swdown"   >   swdown - swnet </field> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_rsusLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave  on Land Use Tile -->
+   <field id="CMIP6_rzwc"          field_ref="humtot"         /> <!-- P1 (kg m-2) water_content_of_root_zone : water_content_of_root_zone -->
+   <field id="CMIP6_sandfrac"      field_ref="dummy_not_provided"       /> <!-- P1 (1)  : Sand Fraction -->
+   <field id="CMIP6_sftgif"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) land_ice_area_fraction : Fraction of Grid Cell Covered with Glacier -->
+   <field id="CMIP6_shrubFrac"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by shrub. -->
+   <field id="CMIP6_slthick"       field_ref="dummy_not_provided"       /> <!-- P1 (m)  : Thickness of Soil Layers -->
+   <field id="CMIP6_snc"           field_ref="frac_snow"         /> <!-- P1 (%) surface_snow_area_fraction : Fraction of each grid cell that is occupied by snow that rests on land portion of cell. -->
+   <field id="CMIP6_snc_ist"       field_ref="dummy_ist"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice sheet  only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snd"           field_ref="dummy_not_provided"         /> <!-- P1 (m) surface_snow_thickness : where land over land, this is computed as the mean thickness of snow in the land portion of the grid cell (averaging over the entire land portion, including the snow-free fraction).  Reported as missing where the land fraction is 0. Warning: Computed and weigthed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_snm_land"      field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Computed as the total surface melt water on the land portion of the grid cell divided by the land area in the grid cell; report as 0.0 for snow-free land regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_snm_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Surface Snow Melt -->
+   <field id="CMIP6_snw"           field_ref="snow"         /> <!-- P1 (kg m-2) surface_snow_amount : Computed as the mass of surface snow on the land portion of the grid cell divided by the land area in the grid cell; reported as missing where the land fraction is 0; excluded is snow on vegetation canopy or on sea ice. -->
+   <field id="CMIP6_sootsn"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soot_content_of_surface_snow : the entire land portion of the grid cell is considered, with snow soot content set to 0.0 in regions free of snow. -->
+   <field id="CMIP6_sw"            field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) surface_water_amount_assuming_no_snow : surface_water_amount_assuming_no_snow Warning: includes the fast reservoire -->
+   <field id="CMIP6_sweLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (m)  : snow water equivalent on land use tile -->
+   <field id="CMIP6_tSoilPools"    field_ref="dummy_not_provided"/> <!-- P2 (s-1) soil_carbon_turnover_rate_by_pool : turnover rate of each model soil carbon pool -->
+   <field id="CMIP6_tas"           field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tasLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (K) air_temperature : near-surface air temperature (2m above displacement height, i.e. t_ref) on land use tile -->
+   <field id="CMIP6_tcs"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) canopy_temperature : Vegetation Canopy Temperature -->
+   <field id="CMIP6_tgs"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) surface_temperature : Temperature of bare soil -->
+   <field id="CMIP6_tpf"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) permafrost_layer_thickness : where land over land: This is the mean thickness of the permafrost layer in the land portion of the grid cell.  Reported as missing in permafrost-free regions. Warning: not yet computed but maybe doable following MICT -->
+   <field id="CMIP6_tran"          field_ref="tran"         /> <!-- P1 (kg m-2 s-1) transpiration_flux : Transpiration -->
+   <field id="CMIP6_treeFrac"      field_ref="treeFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by trees. -->
+   <field id="CMIP6_treeFracBdlDcd" field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Broadleaf deciduous tree fraction -->
+   <field id="CMIP6_treeFracBdlEvg" field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Broadleaf evergreen tree fraction -->
+   <field id="CMIP6_treeFracNdlDcd" field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Needleleaf deciduous tree fraction -->
+   <field id="CMIP6_treeFracNdlEvg" field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Needleleaf evergreen tree fraction -->
+   <field id="CMIP6_treeFracPrimDec" field_ref="treeFracPrimDec"         /> <!-- P1 (%) area_fraction : This is the fraction of the entire grid cell  that is covered by "total primary deciduous trees." -->
+   <field id="CMIP6_treeFracPrimEver" field_ref="treeFracPrimEver"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by primary evergreen trees. -->
+   <field id="CMIP6_treeFracSecDec" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by secondary deciduous trees. -->
+   <field id="CMIP6_treeFracSecEver" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by secondary evergreen trees. -->
+   <field id="CMIP6_ts"            field_ref="dummy_XY"         /> <!-- P1 (K) surface_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsl"           field_ref="ptn"       /> <!-- P1 (K) soil_temperature : Temperature of single near-surface soil layer.  Reported as "missing" for grid cells occupied entirely by "sea". -->
+   <field id="CMIP6_tslsi"         field_ref="temp_sol_new"         /> <!-- P1 (K) surface_temperature : Surface temperature of all surfaces except open ocean. -->
+   <field id="CMIP6_tslsiLut"      field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (K) surface_temperature : Surface Temperature on Landuse Tile -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsn_ist"       field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) temperature_in_surface_snow : This temperature is averaged over all the snow in the grid cell that rests on land or land ice.  When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.   Reported as "missing in regions free of snow on land. Warning: Doable but painful with the two different snow schemes. -->
+   <field id="CMIP6_vegFrac"       field_ref="dummy_not_provided"         /> <!-- P1 (%) area_fraction : Total vegetated fraction -->
+   <field id="CMIP6_vegHeight_land" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over all vegetation types and over the vegetated fraction of a grid cell. -->
+   <field id="CMIP6_vegHeight_veg" field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) canopy_height : Vegetation height averaged over all vegetation types and over the vegetated fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightCrop" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the crop fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightGrass" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the grass fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightPasture" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the pasture fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightShrub" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the shrub fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightTree" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the tree fraction of a grid cell. -->
+   <field id="CMIP6_wetlandCH4"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_emissions : Grid averaged methane emissions from wetlands -->
+   <field id="CMIP6_wetlandCH4cons" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_consumption : Grid averaged methane consuption (methanotrophy) from wetlands -->
+   <field id="CMIP6_wetlandCH4prod" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_production : Grid averaged methane production (methanogenesis) from wetlands -->
+   <field id="CMIP6_wetlandFrac"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) wetland_fraction : Fraction of a grid cell covered by wetland. -->
+   <field id="CMIP6_wilt"          field_ref="dummy_not_provided"       /> <!-- P1 (%) volume_fraction_of_condensed_water_in_soil_at_wilting_point : Wilting Point -->
+   <field id="CMIP6_wtd"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_soil_moisture_saturation : depth_of_soil_moisture_saturation -->
+</field_definition>
+</context>
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/run.def
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/run.def	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/run.def	(revision 5893)
@@ -0,0 +1,55 @@
+# $Id$
+#
+INCLUDEDEF=physiq.def
+INCLUDEDEF=gcm.def
+INCLUDEDEF=vert.def
+INCLUDEDEF=orchidee.def
+INCLUDEDEF=config.def
+INCLUDEDEF=reprobus.def
+INCLUDEDEF=guide.def
+INCLUDEDEF=inca.def
+## Type de calendrier utilise
+## valeur possible: earth_360d (defaut), earth_365d, earth_366d
+calend= _AUTOBLOCKER_
+## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici )
+dayref= _AUTOBLOCKER_
+##  Annee de l etat  initial (   avec  4  chiffres   )
+anneeref= _AUTOBLOCKER_
+## Nombre de jours d integration
+nday= _AUTOBLOCKER_
+## Remise a zero de la date initiale
+raz_date= _AUTOBLOCKER_
+## periode de sortie des variables de controle (en pas)
+iconser=240
+## periode d ecriture du fichier histoire (en jour)
+iecri=1
+## flag de sortie dynzon
+ok_dynzon=n
+## activation du calcul d equilibrage de charge
+adjust= n
+## activation du filtre fft
+use_filtre_fft=y
+## niveau d impression de controle
+prt_level=0
+###
+### Informations sur la configuration utilisee
+###
+### type_ocean = force / slab  /couple
+### type_ocean is modified automatically by the lmdz.driver 
+type_ocean=_AUTOBLOCKER_
+### version_ocean = nemo / opa8
+version_ocean=nemo
+### activation passage courants surface ocean-glace
+cpl_current=y
+### VEGET= y si ORCHIDEE, =n si bucket
+### VEGET is modified automatically by the lmdz.driver 
+VEGET=_AUTOBLOCKER_
+### Choice of tracers type_trac=lmdz/inca/repr
+### type_trac is set automatically by the lmdz.driver
+type_trac=_AUTOBLOCKER_
+### config_inca=aero/chem needed only if type_trac=inca
+config_inca=_AUTOBLOCKER_ 
+### To activate XIOS ouputs only, set n to use IOIPSL
+ok_all_xml= y
+
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/traceur.def
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/traceur.def	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/traceur.def	(revision 5893)
@@ -0,0 +1,7 @@
+6
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
+10 10 Aga
+10 10 RN
+10 10 PB
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/traceur.def_h2o_AP
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/traceur.def_h2o_AP	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/traceur.def_h2o_AP	(revision 5893)
@@ -0,0 +1,4 @@
+2
+10 10 H2Ov
+10 10 H2Ol
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/vert.def_L39
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/vert.def_L39	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/vert.def_L39	(revision 5893)
@@ -0,0 +1,9 @@
+## Avec ou sans strato
+ok_strato=y 
+## Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=y
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/xmlio_server.def
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/xmlio_server.def	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/PARAM/xmlio_server.def	(revision 5893)
@@ -0,0 +1,18 @@
+! xmlio_server namelist
+!
+! using_server: .TRUE.(.FALSE.) to use(bypass) the io_server. AUTO : this variable is updated by the opa9.driver
+! using_oasis : .TRUE.(.FALSE.) if nemo is coupled through OASIS
+! client_id   : used only for OASIS, NEMO      id in the namecouple
+! server_id   : used only for OASIS, io_server id in the namecouple
+!
+&coupling_param
+  using_server = .FALSE.
+  using_oasis  = .TRUE.
+  client_id    = 'oceanx'
+  server_id    = 'ionemo'
+/
+
+! global_mpi_buffer_size: size in Mo of the MPI buffer used by the io_server
+&mpi_param
+  global_mpi_buffer_size = 512
+/
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_inca.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_inca.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_inca.cfg	(revision 5893)
@@ -0,0 +1,104 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=F0D5F4
+smooth=12
+FreqTS=DA
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+od550bcas_global   | "od550bcas"    | "" | "od550bcas[d=1]"    	| "bc as optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550oaas_global  | "od550oaas"   | "" | "od550oaas[d=1]"   	| "pom as optical depth @550nm" | "(-)" 	| "area[d=1]"
+od550so4as_global  | "od550so4as"   | "" | "od550so4as[d=1]"   	| "so4 as optical depth @550nm" | "(-)" 	| "area[d=1]"
+od550ssss_global | "od550ssss"  | "" | "od550ssss[d=1]"  	| "ssssm optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550ssas_global   | "od550ssas"    | "" | "od550ssas[d=1]"    	| "ss as optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+bcai              | "od550bcai"    | "" | "od550bcai[d=1]"    	| "bc optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+oaai              | "od550oaai"    | "" | "od550oaai[d=1]"    	| "oa optical depth @550nm" 	| "(-)" 	| "area[d=1]"
+od550dustci_global | "od550dustci"  | "" | "od550dustci[d=1]"   | "od550dustci"   	| "(-)" 	| "area[d=1]"
+od550no3ci_global  | "od550no3ci"   | "" | "od550no3ci[d=1]"   	| "od550no3ci"   	| "(-)" 	| "area[d=1]"
+od550no3cs_global  | "od550no3cs"   | "" | "od550no3cs[d=1]"   	| "od550no3cs"   	| "(-)" 	| "area[d=1]"
+od550sscs_global  | "od550sscs"   | "" | "d550sscs[d=1]"   	| "d550sscs"   	        | "(-)" 	| "area[d=1]"
+od550nh4as_global  | "od550nh4as"   | "" | "od550nh4as[d=1]"   	| "od550nh4as"   	| "(-)" 	| "area[d=1]"
+od550no3as_global  | "od550no3as"   | "" | "od550no3as[d=1]"   	| "od550no3as"   	| "(-)" 	| "area[d=1]"
+od550soar         | "od550ASARp1a od550ASARp2a"   | "" | "(od550ASARp1a[d=1]+od550ASARp2a[d=2])"   	| "od550soar"   	| "(-)" 	| "area[d=1]"
+od550soap         | "od550ASAPp1a od550ASAPp2a"   | "" | "(od550ASAPp1a[d=1]+od550ASAPp2a[d=2])"   	| "od550soap"   	| "(-)" 	| "area[d=1]"
+loaddustci_global  | "loaddustci"   | "" | "loaddustci[d=1]"   	| "loaddustci"   	| "kg m-2" 	| "area[d=1]"
+loadno3ci_global   | "loadno3ci"    | "" | "loadno3ci[d=1]"    	| "loadno3ci"    	| "kg m-2" 	| "area[d=1]"
+loadbcai_global	   | "loadbcai"     | "" | "loadbcai[d=1]"     	| "loadbcai"     	| "kg m-2" 	| "area[d=1]"
+loadoaai_global   | "loadoaai"    | "" | "loadoaai[d=1]"    	| "loadoaai"    	| "kg m-2" 	| "area[d=1]"
+loadsscs_global	   | "loadsscs"     | "" | "loadsscs[d=1]"     	| "loadsscs"     	| "kg m-2" 	| "area[d=1]"
+loadno3cs_global   | "loadno3cs"    | "" | "loadno3cs[d=1]"    	| "loadno3cs"    	| "kg m-2" 	| "area[d=1]"
+loadssas_global	   | "loadssas"     | "" | "loadssas[d=1]"     	| "loadssas"     	| "kg m-2" 	| "area[d=1]"
+loadbcas_global	   | "loadbcas"     | "" | "loadbcas[d=1]"     	| "loadbcas"     	| "kg m-2" 	| "area[d=1]"
+loadoaas_global   | "loadoaas"    | "" | "loadoaas[d=1]"    	| "loadoaas"    	| "kg m-2" 	| "area[d=1]"
+loadso4as_global   | "loadso4as"    | "" | "loadso4as[d=1]"    	| "loadso4as"    	| "kg m-2" 	| "area[d=1]"
+loadnh4as_global | "loadnh4as"  | "" | "loadnh4as[d=1]"  	| "loadnh4as"  	| "kg m-2" 	| "area[d=1]"
+loadno3as_global | "loadno3as"  | "" | "loadno3as[d=1]"  	| "loadno3as"  	| "kg m-2" 	| "area[d=1]"
+loadssss_global  | "loadssss"   | "" | "loadssss[d=1]"   	| "loadssss"   	| "kg m-2" 	| "area[d=1]"
+loadsoar         | "loadASARp1a loadASARp2a"   | "" | "(loadASARp1a[d=1]+loadASARp2a[d=2])"   	| "loadsoar"   	| "kg m-2" 	| "area[d=1]"
+loadsoap         | "loadASAPp1a loadASAPp2a"   | "" | "(loadASAPp1a[d=1]+loadASAPp2a[d=2])"   	| "loadsoap"   	| "kg m-2" 	| "area[d=1]"
+mmrso4as_surf       | "mmrso4as" | "" | "mmrso4as[d=1,k=39]" | "ASSO4 at surface" | "??" | "area[d=1]"
+mmrssss_surf      | "mmrssss" | "" | "mmrssss[d=1,k=39]"   | "ASSSSM at surface" | "mol mol-1" | "area[d=1]"
+mmrdustci_surf      | "mmrdustci" | "" | "mmrdustic[d=1,k=39]"   | "CIDUSTM at surface" | "??" | "area[d=1]"
+mmrbcai_surf      | "mmrbcai" | "" | "mmrbcai[d=1,k=39]"   | "AIBCM at surface" | "mol mol-1" | "area[d=1]"
+mmrssas_surf      | "mmrssas" | "" | "mmrssas[d=1,k=39]"   | "ASSSM at surface" | "kg kg-1" | "area[d=1]"
+mmrsscs_surf      | "mmrsscs" | "" | "mmrsscs[d=1,k=39]"   | "CSSSM at surface" | "kg kg-1" | "area[d=1]"
+mmrno3as_surf      | "mmrno3as" | "" | "mmrno3as[d=1,k=39]"   | "ASNO3M at surface" | "kg kg-1" | "area[d=1]"
+mmrno3cs_surf      | "mmrno3cs" | "" | "mmrno3cs[d=1,k=39]"   | "CSNO3M at surface" | "kg kg-1" | "area[d=1]"
+mmrno3ci_surf      | "mmrno3ci" | "" | "mmrno3ci[d=1,k=39]"   | "CINO3M at surface" | "kg kg-1" | "area[d=1]"
+mmrASARp1a_surf      | "mmrASARp1a" | "" | "mmrASARp1a[d=1,k=39]"   | "ASARp1a at surface" | "kg kg-1" | "area[d=1]"
+mmrASARp2a_surf      | "mmrASARp2a" | "" | "mmrASARp2a[d=1,k=39]"   | "ASARp2a at surface" | "kg kg-1" | "area[d=1]"
+mmrASAPp1a_surf      | "mmrASAPp1a" | "" | "mmrASAPp1a[d=1,k=39]"   | "ASAPp1a at surface" | "kg kg-1" | "area[d=1]"
+mmrASAPp2a_surf      | "mmrASAPp2a" | "" | "mmrASAPp2a[d=1,k=39]"   | "ASAPp2a at surface" | "kg kg-1" | "area[d=1]"
+mmrsoar_surf         | "mmrASARp1a mmrASARp2a"   | "" | "(mmrASARp1a[d=1,k=39]+mmrASARp2a[d=2,k=39])"   	| "mmrsoar_surf"   	| "kg m-2" 	| "area[d=1]"
+mmrsoap_surf         | "mmrASAPp1a mmrASAPp2a"   | "" | "(mmrASAPp1a[d=1,k=39]+mmrASAPp2a[d=2,k=39])"   	| "mmrsoap_surf"   	| "kg m-2" 	| "area[d=1]"
+mmrbcas_surf      | "mmrbcas" | "" | "mmrbcas[d=1,k=39]"   | "ASBCM at surface" | "kg kg-1" | "area[d=1]"
+mmroaas_surf      | "mmroaas" | "" | "mmroaas[d=1,k=39]"   | "ASPOMM at surface"| "kg kg-1" | "area[d=1]"
+mmroaai_surf      | "mmroaai" | "" | "mmroaai[d=1,k=39]"   | "AIPOMM at surface"| "kg kg-1" | "area[d=1]"
+vmro3_surf      | "vmro3" | "" | "vmro3[d=1,k=39]"   | "O3 at surface"| "mol mol-1" | "area[d=1]"
+vmrco_surf      | "vmrco" | "" | "vmrco[d=1,k=39]"   | "CO at surface"| "mol mol-1" | "area[d=1]"
+vmrnox_surf      | "vmrno2 vmrno" | "" | "(vmrno2[d=1,k=39]+vmrno[d=2,k=39])"   | "NOX at surface"| "mol mol-1" | "area[d=1]"
+vmrch4_surf      | "vmrch4" | "" | "vmrch4[d=1,k=39]"   | "CH4 at surface"| "mol mol-1" | "area[d=1]"
+o3_col_global      | "colo3" 	    | "" | "colo3[d=1]" 	| "colo3" 	 | "DU" | "area[d=1]"
+co_col_global	   | "colco" 	    | "" | "colco[d=1]"		| "colco" 	 | "1.e18 molec cm-2" | "area[d=1]"
+so2_col_global	   | "colso2" 	    | "" | "colso2[d=1]"	| "colso2" 	 | "1.e15 molec cm-2" | "area[d=1]"
+oh_col_global	   | "coloh" 	    | "" | "coloh[d=1]"		| "coloh" 	 | "molec cm-2" | "area[d=1]"
+no2_col_global	   | "colno2" 	    | "" | "colno2[d=1]" 	| "colno2" 	 | "1.e15 molec cm-2" | "area[d=1]"
+ch2o_col_global    | "colch2o"     | "" | "colch2o[d=1]" 	| "colch2o" 	 | "1.e15 molec cm-2" | "area[d=1]"
+ch4_col_global	   | "colch4" 	    | "" | "colch4[d=1]" 	| "colch4" 	 | "1.e19 molec cm-2" | "area[d=1]"
+o3tot_col_global    | "colo3tot"     | "" | "colo3tot[d=1]" 	| "colo3tot" 	 | "DU" | "area[d=1]"
+emi_isop_global	    | "emiisop"      | "" | "emiisop[d=1]" 	| "emi_isop" 	 | "kg m-2 s-1" | "area[d=1]"
+#emi_mono_global	    | "emi_mono"      | "" | "emi_mono[d=1]" 	| "emi_mono" 	 | "kg m-2 s-1" | "area[d=1]"
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_lim2_ORCA2.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_lim2_ORCA2.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_lim2_ORCA2.cfg	(revision 5893)
@@ -0,0 +1,52 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ siconc_north    | "ice_pres"         | ORCA2.3_grid.nc | "(ice_pres[d=1])"   | "Ice Fraction (NORTH)"            | "-"     | "if lat[d=2] ge 0 then mask[k=1,d=2]*area[d=2]"
+ siconc_south    | "ice_pres"         | ORCA2.3_grid.nc | "(ice_pres[d=1])"   | "Ice Fraction (SOUTH)"            | "-"     | "if lat[d=2] le 0 then mask[k=1,d=2]*area[d=2]"
+ iicethic_north  | "iicethic ice_pres"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (NORTH)"      | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "iicethic ice_pres"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (SOUTH)"      | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "isnowthi ice_pres"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (NORTH)"     | "m" | "if lat[d=3] ge 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "isnowthi ice_pres"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (SOUTH)"     | "m" | "if lat[d=3] le 0 and ice_pres[d=2] ne 0 then ice_pres[d=2]*mask[k=1,d=3]*area[d=3]"
+ icesurf_north   | "ice_pres"           | ORCA2.3_grid.nc | "(if lat[d=2] gt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (NORTH)"  | "m2" | "2"
+ icesurf_south   | "ice_pres"           | ORCA2.3_grid.nc | "(if lat[d=2] lt 0 then ice_pres[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (SOUTH)"  | "m2" | "2"
+ icevol_north    | "ice_pres iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (NORTH)"   | "m3" | "2"
+ icevol_south    | "ice_pres iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (SOUTH)"   | "m3" | "2"
+ snowvol_north   | "ice_pres isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (NORTH)"  | "m3" | "2"
+ snowvol_south   | "ice_pres isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ice_pres[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (SOUTH)"  | "m3" | "2"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_lmdz.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_lmdz.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_lmdz.cfg	(revision 5893)
@@ -0,0 +1,73 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=AECDFF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ bils_global    | "bils"                       | "" | "bils[d=1]"               | "Surf. total heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"   
+ nettop_global  | "tops topl"                  | "" | "(tops[d=1]-topl[d=2])"   | "TOA. total heat flux (GLOBAL)"          | "W/m^2"     | "aire[d=1]"
+ nettop0_global | "tops0 topl0"                | "" | "(tops0[d=1]-topl0[d=2])" | "TOA. total heat flux ClearSky (GLOBAL)" | "W/m^2"     | "aire[d=1]"
+ t2m_global     | "t2m"                        | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (GLOBAL)"       | "degrees C" | "aire[d=1]"
+ t2m_land       | "t2m pourc_ter pourc_lic"    | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (LAND)"         | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ tsol_global    | "tsol"                       | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (GLOBAL)"           | "degrees C" | "aire[d=1]"
+ tsol_land      | "tsol pourc_ter pourc_lic"   | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (LAND)"             | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ precip_global  | "precip"                     | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (GLOBAL)"  | "mm/d"      | "aire[d=1]"
+ precip_land    | "precip pourc_ter pourc_lic" | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (LAND)"    | "mm/d"      | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ evap_global    | "evap"                       | "" | "evap[d=1]"               | "Evaporation (GLOBAL)"                   | "kg/(s*m2)" | "aire[d=1]"
+ evap_land      | "evap pourc_ter pourc_lic"   | "" | "evap[d=1]"               | "Evaporation (LAND)"                     | "kg/(s*m2)" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ flat_global    | "lat_ter pourc_ter lat_sic pourc_sic lat_lic pourc_lic lat_oce pourc_oce" | "" | "(lat_ter[d=1]*pourc_ter[d=2]+lat_sic[d=3]*pourc_sic[d=4]+lat_lic[d=5]*pourc_lic[d=6]+lat_oce[d=7]*pourc_oce[d=8])" | "Latent Heat Flux (GLOBAL)"      | "W/m^2" | "aire[d=1]"
+ prw_global     | "prw"                        | "" | "prw[d=1]"                | "Precipitable water (GLOBAL)"            | "kg/m^2"    | "aire[d=1]"
+ od550aer_forcing       | "od550aer"              | "" | "od550aer[d=1]"           | "Total aerosol optical depth at 550nm"   | "-"         | "aire[d=1]"   
+ od550lt1aer_forcing    | "od550lt1aer"           | "" | "od550lt1aer[d=1]"        | "Fine mode optical depth"                | "-"         | "aire[d=1]"   
+ absvisaer_forcing      | "absvisaer"             | "" | "absvisaer[d=1]"          | "Absorption aerosol visible optical depth" | "-"       | "aire[d=1]"   
+ topswai_forcing        | "topswai"               | "" | "topswai[d=1]"            | "AIE at TOA"                             | "W/m^2" | "aire[d=1]"
+ solswai_forcing        | "solswai"               | "" | "solswai[d=1]"            | "AIE at SRF"                             | "W/m^2" | "aire[d=1]"
+ topswad_forcing        | "topswad"               | "" | "topswad[d=1]"            | "ADE at TOA"                             | "W/m^2" | "aire[d=1]"
+ solswad_forcing        | "solswad"               | "" | "solswad[d=1]"            | "ADE at SRF"                             | "W/m^2" | "aire[d=1]" 
+ tro3_strato_forcing    | "tro3"                  | "" | "tro3[x=@din,y=@din,k=1:7@sum,d=1]"  | "ozone strato k=1:7@sum" | "Mole" | ""
+ tro3_tropo_forcing     | "tro3"                  | "" | "tro3[x=@din,y=@din,k=8:17@sum,d=1]" | "ozone trop k=8:17@sum"  | "Mole" | ""
+##solaire_forcing        | "solaire"               | "" | "solaire[d=1]"   | "Constante solaire"      | "W/m^2" | "1"
+##co2_ppm_forcing        | "co2_ppm"               | "" | "co2_ppm[d=1]"   | "Concentration du CO2"   | "ppm"   | "1"
+##CH4_ppb_forcing        | "CH4_ppb"               | "" | "CH4_ppb[d=1]"   | "Concentration du CH4"   | "ppb"   | "1"
+##N2O_ppb_forcing        | "N2O_ppb"               | "" | "N2O_ppb[d=1]"   | "Concentration du N2O"   | "ppb"   | "1"
+##CFC11_ppt_forcing      | "CFC11_ppt"             | "" | "CFC11_ppt[d=1]" | "Concentration du CFC11" | "ppt"   | "1"
+##CFC12_ppt_forcing      | "CFC12_ppt"             | "" | "CFC12_ppt[d=1]" | "Concentration du CFC12" | "ppt"   | "1"
+## R_ecc_forcing      | "R_ecc"                  | "" | "R_ecc[d=1]"   | "Excentricite"      | "-"     | "1"
+## R_peri_forcing     | "R_peri"                 | "" | "R_peri[d=1]"  | "Equinoxe"          | "-"     | "1"
+## R_incl_forcing     | "R_incl"                 | "" | "R_incl[d=1]"  | "Inclinaison"       | "deg"   | "1"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_opa9_ORCA2.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_opa9_ORCA2.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_opa9_ORCA2.cfg	(revision 5893)
@@ -0,0 +1,72 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax
+#   - Each variable must be referenced to its dataset ie var[d=x]
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=6D80FF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ sosstsst_global  | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])"                                       | "Sea Surface Temperature (Global)" | "degC"    | "mask[k=1,d=2]*area[d=2]"
+ sosaline_global  | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])"                                       | "Sea Surface Salinity (Global)"    | "PSU"     | "mask[k=1,d=2]*area[d=2]"
+ sossheig_global  | "zos"      | ORCA2.3_grid.nc | "(zos[d=1])"                                       | "Sea Surface Heigh (Global)"       | "m"       | "mask[k=1,d=2]*area[d=2]"
+ wfo_global       | "wfo"      | ORCA2.3_grid.nc | "(wfo[d=1])"                                       | "Total Water flux (Global, upward)"| "kg/m2/s" | "mask[k=1,d=2]*area[d=2]"
+ friver_global    | "friver"   | ORCA2.3_grid.nc | "(friver[d=1])"                                    | "River input (Global)"             | "kg/m2/s" | "mask[k=1,d=2]*area[d=2]"
+ hc300_global     | "hc300"    | ORCA2.3_grid.nc | "(hc300[d=1])"                                     | "Heat content 300 m (GLOBAL)"      | "W"     | "mask[k=1,d=2]*area[d=2]"
+ sohefldo_global  | "sohefldo" | ORCA2.3_grid.nc | "(nshfls[d=1]+rsntds[d=1])"                        | "Net Downward Heat Flux (Global)"  | "W/m^2"   | "mask[k=1,d=2]*area[d=2]"
+ nadw_ocean       | "zomsfatl"  |       ""        | "(zomsfatl[z=500:6000@max,J=90:120@max,d=1])"        | "North Atlantic Deep Water"        | "Sv"    | "1"
+ npdw_ocean       | "zomsfpac"  |       ""        | "(zomsfpac[z=500:6000@max,J=90:120@max,d=1])"        | "North Pacific Deep Water"         | "Sv"    | "1"
+ aabw_ocean       | "zomsfglo"  |       ""        | "(zomsfglo[z=2000:6000@max,J=37:118@max,d=1])"       | "Antarctic Bottom Water"           | "Sv"    | "1"
+ deacon_ocean     | "zomsfglo"  |       ""        | "(zomsfglo[z=2000:6000@max,J=2:50@max,d=1])"         | "Deacon Cell"                      | "Sv"    | "1"
+ somxl010_north   | "mldr10_1" | ORCA2.3_grid.nc | "(mldr10_1[d=1])" | "Mixed layer depth (NORTH)"    | "m"     | "(if lat[d=2] gt 0 then mask[k=1,d=2]*area[d=2])"
+ somxl010_south   | "mldr10_1" | ORCA2.3_grid.nc | "(mldr10_1[d=1])" | "Mixed layer depth (SOUTH)"    | "m"     | "(if lat[d=2] lt 0 then mask[k=1,d=2]*area[d=2])"
+ temp_500m_global | "thetao"      | ORCA2.3_grid.nc | "(thetao[d=1,k=20])"                            | "Temperature at 500m (GLOBAL)"     | "degC"    | "mask[k=20,d=2]*area[d=2]"
+ temp_1000m_global | "thetao"      | ORCA2.3_grid.nc | "(thetao[d=1,k=23])"                           | "Temperature at 1000m (GLOBAL)"    | "degC"    | "mask[k=23,d=2]*area[d=2]"
+ salini_500m_global | "so"      | ORCA2.3_grid.nc | "(so[d=1,k=20])"                                  | "Salinity at 500m (GLOBAL)"        | "PSU"    | "mask[k=20,d=2]*area[d=2]"
+ salini_1000m_global | "so"      | ORCA2.3_grid.nc | "(so[d=1,k=23])"                                 | "Salinity at 1000m (GLOBAL)"       | "PSU"    | "mask[k=23,d=2]*area[d=2]"
+ sosstsst_70N_90N | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (70N-90N)" | "degC"  | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50N_70N | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (50N-70N)" | "degC"  | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30N_50N | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (30N-50N)" | "degC"  | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10N_30N | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (10N-30N)" | "degC"  | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10S_10N | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (10S-10N)" | "degC"  | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30S_10S | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (30S-10S)" | "degC"  | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50S_30S | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (50S-30S)" | "degC"  | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_70S_50S | "tos"      | ORCA2.3_grid.nc | "(tos[d=1])" | "Sea Surface Temperature (70S-50S)" | "degC"  | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70N_90N | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (70N-90N)"    | "PSU"   | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosaline_50N_70N | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (50N-70N)"    | "PSU"   | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30N_50N | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (30N-50N)"    | "PSU"   | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10N_30N | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (10N-30N)"    | "PSU"   | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10S_10N | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (10S-10N)"    | "PSU"   | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30S_10S | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (30S-10S)"    | "PSU"   | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_50S_30S | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (50S-30S)"    | "PSU"   | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70S_50S | "sos"      | ORCA2.3_grid.nc | "(sos[d=1])" | "Sea Surface Salinity (70S-50S)"    | "PSU"   | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_orchidee.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_orchidee.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_orchidee.cfg	(revision 5893)
@@ -0,0 +1,48 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=E7FFAB
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+temp_sol_lands | "temp_sol"         |  ""              | "temp_sol[d=1]"                    | "TSOL (LANDS)"                 | "K/d"    | "Areas[d=1]*Contfrac[d=1]"
+humidity_lands | "bqsb gqsb"        |  ""              | "(bqsb[d=1]+gqsb[d=2])"            | "Total Soil Moisture  (LANDS)" | "1"      | "Areas[d=1]*Contfrac[d=1]"
+albedo_lands   | "alb_vis alb_nir"  |  ""              | "((alb_vis[d=1]+alb_nir[d=2])*0.5)"| "Mean Albedo (LANDS)"          | "1"      | "Areas[d=1]*Contfrac[d=1]"
+snow_lands     | "snow"             |  ""              | "snow[d=1]"                        | "Snow Mass (LANDS)"            | "kg/m^2" | "Areas[d=1]*Contfrac[d=1]"
+maxveget_lands | "maxvegetfrac"     |  ""              | "maxvegetfrac[d=1,K=12:13]"        | "vegetmax[pft=12,13] (LANDS)"  | "1"      | "2"
+nee_lands      | "nee maxvegetfrac" |  ""              | "(nee[d=1]*365*86400*maxvegetfrac[d=2]*Areas[d=1]*Contfrac[d=1]/1e15)"  | "Net Ecosystem Exchange"    | "PgC/yr" | "2"
+maxveget_forcing | "maxvegetfrac"   |  ""              | "((maxvegetfrac[d=1,K=12]+maxvegetfrac[d=1,K=13])*Areas[d=1]*Contfrac[d=1]/1e12)" | "maxveget surface[pft=12,13] "  | "Mkm^2"  | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_pisces_ORCA2.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_pisces_ORCA2.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_pisces_ORCA2.cfg	(revision 5893)
@@ -0,0 +1,49 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2011/09/12 12:17:53 $
+# $Name: ATLAS_672_1_1 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D0F8E0
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal  | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ no3_global  | "NO3"      | "ORCA2.3_grid.nc"  | "(NO3[d=1,k=1])"               | "Nitrate Concentration at surface"      | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ dic_global  | "DIC"      | "ORCA2.3_grid.nc"  | "(DIC[d=1,k=1])"               | "DIC Concentration at surface"          | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ alk_global  | "Alkalini" | "ORCA2.3_grid.nc"  | "(Alkalini[d=1,k=1])"          | "Alkalinity Concentration  at surface"  | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ o2_global   | "O2"       | "ORCA2.3_grid.nc"  | "(O2[d=1,k=1])"                | "Oxygen Concentration at surface"       | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ si_global   | "Si"       | "ORCA2.3_grid.nc"  | "(Si[d=1,k=1])"                | "Silicate Concentration at surface"     | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ po4_global  | "PO4"      | "ORCA2.3_grid.nc"  | "(PO4[d=1,k=1])"               | "Phosphorus Concentration  at surface"  | "mmol/m3"    | "mask[d=2,k=1]*area[d=2]"
+ cflx_global | "Cflx"     | "ORCA2.3_grid.nc"  | "(Cflx[d=1]*3600*24*365*12)"   | "Ocean carbon flux (GLOBAL)"            | "gC/m2/yr"   | "mask[k=1,d=2]*area[d=2]"
+ epc_global  | "EPC100"   | "ORCA2.3_grid.nc"  | "(EPC100[d=1]*3600*24*365*12)" | "Carbon export at 100m (GLOBAL)"        | "gC/m2/yr"   | "mask[k=1,d=2]*area[d=2]"
+#-----------------------------------------------------------------------------------------------------------------
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_stomate.cfg
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_stomate.cfg	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/POST/monitoring01_stomate.cfg	(revision 5893)
@@ -0,0 +1,51 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=EEE8AA
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+fLuc_fHarvest_lands | "CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE CONTFRAC"  | "" | "((CONVFLUX[d=1]+CFLUX_PROD10[d=2]+CFLUX_PROD100[d=3]+HARVEST_ABOVE[d=4])*AREAS[d=1]*CONTFRAC[d=5]*365/1e15)"                           | "CO2 flux from Land Use Change and Crop Harvesting"            | "PgC/yr" | "2"
+fHarvest_lands      | "HARVEST_ABOVE CONTFRAC"             | "" | "((HARVEST_ABOVE[d=1])*AREAS[d=1]*CONTFRAC[d=2]*365/1e15)"                           | "CO2 flux from Land Use Change and Crop Harvesting"            | "PgC/yr" | "2"
+nbp_lands           | "nbp"                                | "" | "(nbp[d=1]*Areas[d=1]*86400*365/1e12)"             | "Net Biospheric Production"       | "PgC/yr" | "2"
+cSoil_lands         | "TOTAL_SOIL_CARB VEGET_MAX CONTFRAC" | "" | "(TOTAL_SOIL_CARB[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"     | "Carbon Soil in Pool"                                   | "PgC"    | "2"
+cVeg_lands          | "TOTAL_M VEGET_MAX CONTFRAC"         | "" | "(TOTAL_M[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"             | "Carbon in vegetation"                                       | "PgC"    | "2"
+npp_lands           | "NPP VEGET_MAX CONTFRAC"             | "" | "(NPP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"             | "Net Primary Production"                                  | "PgC/yr" | "2"
+rh_lands            | "HET_RESP VEGET_MAX CONTFRAC"        | "" | "(HET_RESP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"        | "Heterotrophic Respiration"                                     | "PgC/yr" | "2"
+fFire_lands         | "CO2_FIRE VEGET_MAX CONTFRAC"        | "" | "(CO2_FIRE[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"        | "CO2 emission from fire"                                     | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+
+
Index: /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/config.card
===================================================================
--- /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/config.card	(revision 5893)
+++ /CMIP6/AerChemMIP/CM5A2CHT1-VLR-4CO2-02/config.card	(revision 5893)
@@ -0,0 +1,214 @@
+#
+# This is config.card file for IPSLCM6 configuration
+#
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#===========================
+JobName=CM5A2CHT1-VLR-4xCO2-02
+#----- Short Name of Experiment
+ExperimentName=abrupt-4xCO2
+#----- DEVT TEST PROD
+SpaceName=PROD
+LongName="IPSLCM5A2.1"
+TagName=IPSLCM5A2CHT
+ModelName=IPSL-CM5A2-INCA
+Member=r1i1p1f1
+#D- Choice of experiment in EXPERIMENTS directory
+ExpType=IPSLCMCHT/S_piControl_CMIP6
+#============================
+#-- leap, noleap, 360d
+CalendarType=noleap
+#-- Experiment dates : Beginning and ending
+#-- "YYYY-MM-DD"
+DateBegin=1850-01-01
+#DateEnd=1859-12-31
+DateEnd=1999-12-31
+#============================
+ORCA_version=ORCA2.3
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
+PeriodLength=1Y
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=y
+#D- Last day of the experience used as restart
+RestartDate=1869-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=CM5A2CHT1-VLR-piCtrl-01
+#D- Path Server Group Login (=> PSGL)
+RestartPath=${R_IN}/RESTART/IPSLCM5A2CHT/PROD/piControl
+# Attention login depend de la machine
+
+#========================================================================
+#D-- ATM -
+[ATM]
+WriteFrequency="1M 1D"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=2001-12-31
+#D- Define restart simulation name for all components
+RestartJobName=ESM.S.pdCtrl.O3
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsmipsl/p24cozic/IGCM_OUT/IPSLCM5A2CHT/PROD/pdControl
+
+#========================================================================
+#D-- OCE -
+[OCE]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=6999-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM5A2.1.pi.debug
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p25sepul/IGCM_OUT/IPSLCM5A2/PROD/piControl
+
+
+#========================================================================
+#D-- ICE -
+[ICE]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=6999-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM5A2.1.pi.debug
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p25sepul/IGCM_OUT/IPSLCM5A2/PROD/piControl
+
+#========================================================================
+#D-- MBG -
+[MBG]
+WriteFrequency="1M 1Y"
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=6999-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM5A2.1.pi.debug
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p25sepul/IGCM_OUT/IPSLCM5A2/PROD/piControl
+
+#========================================================================
+#D-- SRF -
+[SRF]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=6999-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM5A2.1.pi.debug
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p25sepul/IGCM_OUT/IPSLCM5A2/PROD/piControl
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=6999-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM5A2.1.pi.debug
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p25sepul/IGCM_OUT/IPSLCM5A2/PROD/piControl
+
+#========================================================================
+#D-- CPL -
+[CPL]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#D- Last day of the experience used as restart for all components
+RestartDate=6999-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM5A2.1.pi.debug
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/dsm/p25sepul/IGCM_OUT/IPSLCM5A2/PROD/piControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+
+#========================================================================
+#D-- CHM -
+[CHM]
+#D-- choose inca writefrequency between 1D, 1H or 1M. it is not possible to cumulate both of them
+#D-- you can also manage the writefrequency in INCA/src/INCA_XML/file_*.xml files
+WriteFrequency="1D"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ4-dev)
+SRF= (orchidee, ORCHIDEE_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+OCE= (opa9, CMIP5_IPSL)
+ICE= (lim2, CMIP5_IPSL)
+MBG= (pisces, CMIP5_IPSL)
+CPL= (oasis, OASIS3-MCT)
+CHM= (inca, INCA5) 
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, lmdz.x, 47MPI, 12OMP)
+SRF= ("" ,"" )
+SBG= ("" ,"" )
+OCE= (opa, opa.xx, 45MPI)
+ICE= ("" ,"" )
+MBG= ("" ,"" )
+CPL= ("", "" )
+CHM= ("", "")
+IOS= (xios_server.exe, xios.x, 12MPI)
+
+#========================================================================
+#D-- Post -
+[Post]
+ParserXIOS=FALSE
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission (use NONE for DRYRUN=3)
+RebuildFrequency=NONE
+#D- Do we pack restart and debug txt files, this flag determines
+#D- frequency of pack submission (use NONE for DRYRUN=3)
+PackFrequency=1Y
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission (NONE if you don t want)
+TimeSeriesFrequency=1Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average (NONE if you don t want)
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation s years
+SeasonalFrequencyOffset=0
+
+#========================================================================
