Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card	(revision 5176)
@@ -0,0 +1,233 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for an early version of the new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
+# LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later
+# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
+# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+# LMDZ_Physics=NPv6.1.3 as NPv6.1 but allows tau_gl to be modified
+LMDZ_Physics=NPv6.1.3
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and output frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=y
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC output frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+[InitialStateFiles]
+List=	(${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\
+        (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/startphy_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc) 
+
+[BoundaryFiles]
+# With CMIP6 aerosols version 1
+List=   (/ccc/store/cont003/gencmip6/p86ggas/IGCM_OUT/LMDZ/pdSST-futAntSIC-144x142x79/ATM/Output/Boundary/pdSST-futAntSIC-144x142x79_${year}_limit.nc, limit.nc),\
+        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols2000_from_inca.nc,              aerosols${year}.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_2000.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_2000.nc,        solarforcing.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.2000.nc, taulwstrat.2D.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.2000.nc, tauswstrat.2D.nc),\
+        (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/2000/dr2xml_LMDZ.xml, dr2xml_lmdz.xml)
+
+# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
+# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
+ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\
+            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+# ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
+#            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\
+#            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out, ping_lmdz.xml, dr2xml_lmdz.xml)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),                  \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWdnTOA, SWupTOA, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, toplwad, topswai, toplwai, topswad0, toplwad0, solswad, sollwad, solswai, sollwai, solswad0, sollwad0, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, v10m, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, sconcoa, sconcbc, sconcso4, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (temp, theta, ovap, geop, vitu, vitv, vitw, pres, rneb, rhum, paprs, ec550aer, concoa, concbc, concso4, concss, concdust)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card-bck
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card-bck	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card-bck	(revision 5176)
@@ -0,0 +1,227 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for an early version of the new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
+# LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later
+# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
+# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+# LMDZ_Physics=NPv6.1.3 as NPv6.1 but allows tau_gl to be modified
+LMDZ_Physics=NPv6.1.3
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and output frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=y
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC output frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+[InitialStateFiles]
+List=	(${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\
+        (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/startphy_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc) 
+
+[BoundaryFiles]
+# With CMIP6 aerosols version 1
+List=   (/ccc/work/cont003/gencmip6/p86ggas/PAMIP/LIMITFILE, limit.nc),\
+        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
+
+# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
+# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
+ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    Post_1M_histmthNMC),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = 100Y 
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card_old
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card_old	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/lmdz.card_old	(revision 5176)
@@ -0,0 +1,233 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
+# LMDZ_Physics=NPv3.2 for an early version of the new physics, to be used with LMDZ5/trunk revision 1554 or later
+# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
+# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
+# LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later
+# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
+# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
+# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
+# LMDZ_Physics=NPv6.1.3 as NPv6.1 but allows tau_gl to be modified
+LMDZ_Physics=NPv6.1.3
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# Manage radiative aerosol effect and ozone
+flag_aerosol=6
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
+tau_gl=2.
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and output frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=y
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC output frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+[InitialStateFiles]
+List=	(${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\
+        (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/startphy_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc) 
+
+[BoundaryFiles]
+# With CMIP6 aerosols version 1
+List=   (/ccc/store/cont003/gencmip6/p86ggas/IGCM_OUT/LMDZ/piSST-piSIC-144x142x79/ATM/Output/Boundary/piSST-piSIC-144x142x79_${year}_limit.nc, limit.nc),\
+        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols2000_from_inca.nc,              aerosols${year}.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_2000.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_2000.nc,        solarforcing.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.2000.nc, taulwstrat.2D.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.2000.nc, tauswstrat.2D.nc),\
+        (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/2000/dr2xml_LMDZ.xml, dr2xml_lmdz.xml)
+
+# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
+# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
+ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\
+            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+# ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+#            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
+#            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\
+#            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out, ping_lmdz.xml, dr2xml_lmdz.xml)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),                  \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWdnTOA, SWupTOA, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, toplwad, topswai, toplwai, topswad0, toplwad0, solswad, sollwad, solswai, sollwai, solswad0, sollwad0, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, v10m, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, sconcoa, sconcbc, sconcso4, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (temp, theta, ovap, geop, vitu, vitv, vitw, pres, rneb, rhum, paprs, ec550aer, concoa, concbc, concso4, concss, concdust)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/orchidee.card
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/orchidee.card	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/orchidee.card	(revision 5176)
@@ -0,0 +1,81 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=CWRR
+
+VEGET_UPDATE=1Y
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 0
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = NONE
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc, . ), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_2000.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_2000.nc, woodharvest.nc) ,\
+      (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/2000/dr2xml_orchidee.xml, .)
+ListNonDel= ()
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .) ,\
+        (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc, ping_orchidee.xml, dr2xml_orchidee.xml)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/orchidee.card-bck
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/orchidee.card-bck	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/orchidee.card-bck	(revision 5176)
@@ -0,0 +1,80 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=CWRR
+
+VEGET_UPDATE=1Y
+
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc, . ), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc)
+ListNonDel= ()
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/stomate.card
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/stomate.card	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/stomate.card	(revision 5176)
@@ -0,0 +1,59 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+# Specify output level for output files
+# Only the files stomate_history.nc and stomate_ipcc_history.nc can be set here.
+# output_level_filname=0     : lowest level writing only variables needed for the monitoring
+# output_level_filname=10    : highest level which will output all variables
+# output_level_filname=NONE  : deactivate the file
+output_level_stomate_history = 10
+output_level_stomate_ipcc_history = 1
+
+# Specify output frequency for each file [1y, 1mo, 1d]
+# Settings using WriteFrequency in config.card are not longer used
+output_freq_stomate_history = 1mo
+output_freq_stomate_ipcc_history = 1mo
+
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=   ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+List=   (stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (stomate_history.nc,      ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc,      Post_1M_stomate_history),    \
+        (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (T2M_MONTH,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (LAI,VEGET_COV_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE,TOTAL_TURN,WOOD_HARVEST_PFT)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_1M_stomate_ipcc_history]
+Patches = ()
+GatherWithInternal = (lon, lat, Areas, CONTFRAC, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep, fWoodharvest)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal = ON
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/xios.card
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/xios.card	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/COMP/xios.card	(revision 5176)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(xios_registry.bin, xios_registry.bin, xios_registry.bin)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/lmdz.driver
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/lmdz.driver	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/lmdz.driver	(revision 5176)
@@ -0,0 +1,712 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function ATM_Initialize
+{
+    IGCM_debug_PushStack "ATM_Initialize"
+
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
+
+    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
+    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
+    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
+    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+    ##- Create_etat0_limit version
+    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
+    ##  This variable is only used in lmdz.card to choose input files.
+    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
+	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
+	CREATE=${lmdz_UserChoices_CREATE}
+	echo create_etat0_limit version : ${CREATE}
+    fi
+
+
+    ## - LMDZ choice of config.def file
+    ##   ConfType must be set in lmdz.card
+    ConfType=${lmdz_UserChoices_ConfType}
+
+    ##- LMDZ output level, to be set in lmdz.card
+    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
+	# OutLevel is not set. Take default value low.
+	OutLevel=low
+    else
+	OutLevel=${lmdz_UserChoices_OutLevel}
+    fi
+
+    ##-- Output frequency purpose ....
+    ##--  Initialisation  ....
+    ok_mensuel=.FALSE.
+    ok_journe=.FALSE.
+    ok_hf=.FALSE.
+    ok_hf3h=.FALSE.
+    ok_hf3hm=.FALSE.
+    ok_stn=.FALSE.
+
+
+    case ${config_UserChoices_PeriodLength} in
+	1Y|1y|1M|1m) ok_mensuel=.TRUE. ;;
+	5D|5d|1D|1d) ok_journe=.TRUE. ;;
+    esac
+
+    for frequency in ${config_ATM_WriteFrequency} ; do
+	case ${frequency} in
+	    1M|1m) ok_mensuel=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    5D|5d|1D|1d) ok_journe=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    HF|hf) ok_hf=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3h|hf3h) ok_hf3h=.TRUE. ;;
+	esac
+	case ${frequency} in 
+	    HF3hm|hf3hm) ok_hf3hm=.TRUE. ;;
+	esac
+	case ${frequency} in
+	    STN|stn) ok_stn=.TRUE. ;;
+	esac
+    done
+
+
+##  Read LMDZ_COSP_OK in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_COSP_OK} = Xy ] ; then
+	##  LMDZ_COSP_OK=y, now read all other COSP variables
+	##  Read LMDZ_COSP_monthly in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_monthly} = Xy ] ; then
+	    LMDZ_COSP_monthly=.TRUE.
+	else
+	    LMDZ_COSP_monthly=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_daily in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_daily} = Xy ] ; then
+	    LMDZ_COSP_daily=.TRUE.
+	else
+	    LMDZ_COSP_daily=.FALSE.
+	fi
+        ##  Read LMDZ_COSP_hf in lmdz.card
+	if [ X${lmdz_UserChoices_LMDZ_COSP_hf} = Xy ] ; then
+	    LMDZ_COSP_hf=.TRUE.
+	else
+	    LMDZ_COSP_hf=.FALSE.
+	fi
+    else
+	# LMDZ_COSP_OK=n : All cosp output are deactivated
+	LMDZ_COSP_monthly=.FALSE.
+	LMDZ_COSP_daily=.FALSE.
+	LMDZ_COSP_hf=.FALSE.
+    fi	
+
+    ##  Read LMDZ_NMC_monthly in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_monthly} = Xy ] ; then
+	LMDZ_NMC_monthly=.TRUE.
+    else
+	LMDZ_NMC_monthly=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_daily in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_daily} = Xy ] ; then
+	LMDZ_NMC_daily=.TRUE.
+    else
+	LMDZ_NMC_daily=.FALSE.
+    fi
+    
+    ## Read LMDZ_NMC_hf in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_NMC_hf} = Xy ] ; then
+	LMDZ_NMC_hf=.TRUE.
+    else
+	LMDZ_NMC_hf=.FALSE.
+    fi
+    
+
+    IGCM_debug_PopStack "ATM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function ATM_Update
+{
+    IGCM_debug_PushStack "ATM_Update"
+
+    ##-- GHG forcing :
+    ##   If forcing file exist in run directory, read values for the current year 
+    ##   and set in config.def. If not use the default value set in config.def
+
+    # Read value for solaire from file SOLARANDVOLCANOES.txt. If file not existing, take DEFAULT value from file. 
+    IGCM_debug_Print 1 "Note that the solaire parameter is here below changed but it is only used by LMDZ for old physics(AP and NPv3.2)"
+    IGCM_debug_Print 1 "For newer physics with iflag_rrtm=1 and ok_suntime_rrtm=y, the solar constant is instead taken from solarforcing.nc file"
+    if [ -f SOLARANDVOLCANOES.txt ] ; then
+	value=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def solaire $value
+
+    # Read value for eccentricity from file Eccentricity.txt. If file not existing, take DEFAULT value from file.
+    if [ -f Eccentricity.txt ] ; then
+	value=`grep Annee_${year} Eccentricity.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file Eccentricity.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def R_ecc $value
+
+    # Read value for obliquity from file Obliquity.txt. If file not existing, take DEFAULT value from file.
+    if [ -f Obliquity.txt ] ; then
+	value=`grep Annee_${year} Obliquity.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file Obliquity.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def R_incl $value
+
+    # Read value for perihelie from file Perihelie.txt. If file not existing, take DEFAULT value from file.
+    if [ -f Perihelie.txt ] ; then
+	value=`grep Annee_${year} Perihelie.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file Perihelie.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def R_peri $value
+
+    # Read value for co2_ppm from file CO2.txt. If file not existing, take DEFAULT value from file. 
+    # Calculate co2_ppm_per as co2_ppm*4.
+    if [ -f CO2.txt ] ; then
+       	value=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CO2.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+	value4=`grep Annee_${year} CO2.txt | awk -F= '{print $2 * 4}'`
+    else
+	value=DEFAULT
+	value4=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm $value
+    IGCM_comp_modifyDefFile nonblocker config.def co2_ppm_per $value4
+
+
+    # Read value for CH4_ppb from file CH4.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CH4.txt ] ; then
+	value=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CH4.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CH4_ppb $value
+
+
+    # Read value for N2O_ppb from file N2O.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f N2O.txt ] ; then
+	value=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file N2O.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def N2O_ppb $value
+
+    # Read value for CFC11_ppt from file CFC11.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC11.txt ] ; then
+	value=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC11_ppt $value
+
+
+    # Read value for CFC12_ppt from file CFC12.txt. If file not existing, take DEFAULT value from file. 
+    if [ -f CFC12.txt ] ; then
+	value=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
+	if [ X"${value}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	fi
+    else
+	value=DEFAULT
+    fi
+    IGCM_comp_modifyDefFile nonblocker config.def CFC12_ppt $value
+
+
+    ## Coupling Time Step : Take value of FreqCoupling set in oasis.card or if it is not set, take default value 86400
+    LMDZ_t_coupl=${oasis_UserChoices_FreqCoupling:-86400}
+    IGCM_debug_Print 3 "LMDZ_t_coupl "   ${LMDZ_t_coupl}
+    IGCM_comp_modifyDefFile nonblocker config.def t_coupl   ${LMDZ_t_coupl} 
+
+    ##-- Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Update
+    fi
+
+
+    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate 
+    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
+    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
+	LMDZ_COSP_daily=.TRUE.
+    fi
+
+    ## Modifiy 
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmth_lmdz.xml histmth enabled ${ok_mensuel}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday enabled ${ok_journe}
+    
+    if [ X${OutLevel} = Xlow ] || [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 2
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histday_lmdz.xml histday output_level 5
+    fi
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf enabled ${ok_hf}
+    
+    if [ X${OutLevel} = Xlow ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 5
+    elif [ X${OutLevel} = Xmedium ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 6
+    elif [ X${OutLevel} = Xhigh ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histhf_lmdz.xml histhf output_level 7
+    fi
+    	
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3h_lmdz.xml histhf3h enabled ${ok_hf3h}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhf3hm_lmdz.xml histhf3hm enabled ${ok_hf3hm}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histstn_lmdz.xml histstn enabled ${ok_stn}
+
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthNMC_lmdz.xml histmthNMC enabled ${LMDZ_NMC_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayNMC_lmdz.xml histdayNMC enabled ${LMDZ_NMC_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfNMC_lmdz.xml histhfNMC enabled ${LMDZ_NMC_hf}
+    
+    IGCM_comp_modifyXmlFile nonblocker file_def_histmthCOSP_lmdz.xml histmthCOSP enabled ${LMDZ_COSP_monthly}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histdayCOSP_lmdz.xml histdayCOSP enabled ${LMDZ_COSP_daily}
+    IGCM_comp_modifyXmlFile nonblocker file_def_histhfCOSP_lmdz.xml histhfCOSP enabled ${LMDZ_COSP_hf}
+
+    # Activate the histstrataer output file only for configuration with interactive stratospheric aersols 
+    # done by setting the key word LMDZ_strataero=y in lmdz.card
+    if [ X${lmdz_UserChoices_LMDZ_strataero} = Xy ] ; then
+	IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .TRUE.
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_histstrataer_lmdz.xml histstrataer enabled .FALSE.
+    fi
+
+
+    ## run.def parameters
+
+
+    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	IGCM_comp_modifyDefFile blocker run.def raz_date  1
+    else
+	IGCM_comp_modifyDefFile blocker run.def raz_date  0
+    fi
+
+    ##-- Calendar type for LMDZ and create_etat0_limit
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+	    IGCM_comp_modifyDefFile blocker run.def calend  gregorian ;;
+        noleap)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_365d ;;
+        360d)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+        *)
+	    IGCM_comp_modifyDefFile blocker run.def calend  earth_360d ;;
+    esac
+
+    IGCM_comp_modifyDefFile blocker run.def dayref    ${InitDay}
+    IGCM_comp_modifyDefFile blocker run.def nday      ${PeriodLengthInDays}
+
+    # Set anneeref different for gcm and ce0l
+    # Test if executable create_etat0_limit is present and lmdz.x is not present
+    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
+	# for case ce0l : always take current year
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${year}
+
+        # Temporary, set use_filtre_fft=n because we now use dyn3d for ce0l version where fft is not implemented. 
+        # In more recent versions of LMDZ, this will not be needed. 
+	IGCM_comp_modifyDefFile force   run.def use_filtre_fft n
+    else
+	# for case gcm : take first year of simulation
+	IGCM_comp_modifyDefFile blocker run.def anneeref ${InitYear}
+    fi
+
+    ## Determine from the variable ListOfComponents in config.card coupling to external models 
+    ## and set corresponding parameters in run.def
+    echo ListOfComponents now running : ${config_ListOfComponents[*]}
+
+    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
+	echo "Activate ORCHIDEE, set VEGET=y in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET y
+    else
+	echo "No ORCHIDEE, set VEGET=n in run.def"
+	IGCM_comp_modifyDefFile blocker run.def VEGET n
+    fi
+
+    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
+	echo "Activate coupling to ocean, set type_ocean=couple in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_ocean couple
+    else
+	echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
+	IGCM_comp_modifyDefFile nonblocker run.def type_ocean force
+    fi
+
+    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
+	echo "Activate coupling to INCA, set type_trac=inca in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac inca
+    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
+	echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac repr
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    else
+	echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
+	IGCM_comp_modifyDefFile blocker run.def type_trac lmdz
+        IGCM_comp_modifyDefFile blocker run.def config_inca none
+    fi
+
+
+    # run.def : Activate the call to phytrac 
+    if [ ! X${lmdz_UserChoices_iflag_phytrac} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac ${lmdz_UserChoices_iflag_phytrac}
+    else
+	IGCM_comp_modifyDefFile nonblocker run.def iflag_phytrac 0
+    fi 
+
+    # physiq.def : Activate the call to phytrac 
+    if [ ! X${lmdz_UserChoices_ok_bug_cv_trac} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  ${lmdz_UserChoices_ok_bug_cv_trac}
+    else
+	IGCM_comp_modifyDefFile nonblocker physiq.def ok_bug_cv_trac  n
+    fi 
+
+    # config.def : Activate direct radiative effect if ok_ade=y
+    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade ${lmdz_UserChoices_ok_ade}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_ade n
+    fi 
+
+    # config.def : Activate indirect radiative effect if ok_aie=y
+    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie ${lmdz_UserChoices_ok_aie}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_aie n
+    fi 
+
+    # config.def : Activate online aerosol coupled model if aerosol_couple=y
+    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def aerosol_couple n
+    fi 
+
+    # config.def : Activate online Ozone chemistry coupled model if chemistry_couple=y
+    if [ ! X${lmdz_UserChoices_chemistry_couple} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple ${lmdz_UserChoices_chemistry_couple}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def chemistry_couple n
+    fi 
+
+    # config.def : Activate reading of ozone in climatology if read_climoz=2
+    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz ${lmdz_UserChoices_read_climoz}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def read_climoz 0	
+    fi 
+
+    # config.def : Choose aerosol use in radiative effect 
+    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only 
+    # =5 => dust only =6 => all aerosol    
+    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def flag_aerosol 0
+    fi 
+
+    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
+    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cdnc n	
+    fi 
+
+    # config.def : Activate COSP
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp ${lmdz_UserChoices_LMDZ_COSP_OK}
+    else
+	IGCM_comp_modifyDefFile nonblocker config.def ok_cosp n	
+    fi 
+
+    # config.def : Modify parameter pmagic if it is set in lmdz.card
+    if [ ! X${lmdz_UserChoices_pmagic} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic ${lmdz_UserChoices_pmagic}
+    else
+	# Take default value set in config.def
+	IGCM_comp_modifyDefFile nonblocker config.def pmagic DEFAULT
+    fi 
+
+    # physiq.def : Modify parameter tau_gl if it is set in lmdz.card
+    if [ ! X${lmdz_UserChoices_tau_gl} = X ]; then 
+	IGCM_comp_modifyDefFile nonblocker physiq.def tau_gl ${lmdz_UserChoices_tau_gl}
+    else
+	# Take default value set in physiq.def
+	IGCM_comp_modifyDefFile nonblocker physiq.def tau_gl DEFAULT
+    fi
+   
+
+    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
+    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
+    else
+	IGCM_comp_modifyDefFile nonblocker guide.def ok_guide n
+    fi
+
+
+    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
+    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
+    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
+	awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
+	IGCM_sys_Mv gcm.def.tmp gcm.def
+	echo
+	IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
+	echo
+	cat gcm.def
+	ByPass_hgardfou_teta=n
+	IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
+    fi
+
+    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
+    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
+    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
+	sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
+        IGCM_sys_Mv gcm.def.tmp gcm.def
+        echo
+        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
+        echo
+        cat gcm.def
+        ByPass_hgardfou_mats=n
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
+    fi
+
+    # Add include of LMDZ context in iodef.xml
+    # In iodef.xml add on the next line after "COMPONENT CONTEXT"
+    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
+    # Add inclusion of file context_input_lmdz.xml if this file exists
+    if [ -f context_input_lmdz.xml ] ; then
+        echo '<context id="LMDZ" src="./context_input_lmdz.xml"/>' >> add.tmp
+    fi
+    # Include xml files for output configuration if running with workflow CMIP6
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+	echo '<context id="LMDZ" src="./ping_lmdz.xml"/>' >> add.tmp
+	echo '<context id="LMDZ" src="./dr2xml_lmdz.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    #Long Name as global attribute (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*lmdz.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done
+	rm add.tmp
+    fi
+            
+    IGCM_debug_PopStack "ATM_Update"
+}
+
+#-----------------------------------
+function ATM_Finalize
+{
+    IGCM_debug_PushStack "ATM_Finalize"
+
+    # Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Finalize
+    fi
+
+    echo FINALIZE ATM !
+
+    IGCM_debug_PopStack "ATM_Finalize"
+}
+
+
+
+function ATM_Carbon_Update
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Update"
+
+    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
+    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    typeset PathCO2log 
+    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
+    
+    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
+        ##--Initialization of fluxes to an undefined value at the first run
+	UndefinedValueCo2=-9999
+	InitPeriodCo2=0
+	InitDateBeginCo2=${UndefinedValueCo2}
+	InitYearCo2=$(( ${year} - 1 )) 
+	InitDateEndCo2=${InitYearCo2}1231
+	fCO2_ff=${UndefinedValueCo2} 
+	CO2SBG=${UndefinedValueCo2}
+	CO2LU=${UndefinedValueCo2}
+	CO2MBG=${UndefinedValueCo2}
+	CO2_ppm_prec=${UndefinedValueCo2}
+        # Get the initial value of atmosp. pco2 
+	CO2_ppm=${lmdz_UserChoices_co2_init}
+	
+	IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+	echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	
+        # Get the path where the log file co2.log is
+	PathCO2log=${SUBMIT_DIR} 
+        # Get Previous line in co2.log
+	PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+	
+    else
+	
+	# NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
+        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
+	#SubmitRestartPath=
+	if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
+	    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
+	    PathCO2log=${config_ATM_SubmitRestartPath}
+	    Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
+	    PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
+	    
+	    IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	    IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	    
+            # Save Last Line of control in new co2.log file
+	    InitPeriodCo2=0   
+	    InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
+	    InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
+	    fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
+	    CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
+	    CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
+	    CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
+	    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	    
+	    echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+		gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	else
+           # Get restart line in co2.log
+	    PathCO2log=${SUBMIT_DIR}
+	    PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+           # Get the value of atmosp. pco2 in co2.log
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	fi
+	
+    fi
+    
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
+	# Modify co2_ppm in config.def only for historical run
+	# If not historical run, keep co2_ppm value set earlier by IGCM_comp_modifyDefFile
+	IGCM_comp_modifyDefFile force config.def co2_ppm     ${CO2_ppm}
+    fi
+    IGCM_debug_PopStack "ATM_Carbon_Update"
+}
+
+
+function ATM_Carbon_Finalize
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Finalize"
+
+    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    
+	# Fossil fuel emission
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
+            # For Control, no fossil fuel emission :
+	fCO2_ff=0
+	echo "Fossil Fuel for control run  :" ${fCO2_ff}
+    else
+            # For historical, get the fossile fuel file :
+	fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
+	echo "Fossil Fuel for historical run  :" ${fCO2_ff}
+    fi
+    
+        # Get the value of ocean carbon flux
+    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
+    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
+    echo "Ocean carbon flux  :" ${CO2MBG}
+    
+        # Get the value of land fluxes
+    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
+    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
+    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
+    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
+    echo "Land carbon flux (NEP)         :" ${CO2SRF}
+    echo "LU flux          (FLUC)        :" ${CO2LU}
+    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
+    
+        # Previous CO2
+    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+    echo "Previous CO2  :" ${CO2_ppm_prec}
+    
+        # Formula
+    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
+    echo "New CO2  :" ${CO2_ppm}
+    
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+    
+    IGCM_debug_PopStack "ATM_Carbon_Finalize"
+}
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/orchidee.driver
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/orchidee.driver	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/orchidee.driver	(revision 5176)
@@ -0,0 +1,172 @@
+#!/bin/ksh
+## Driver for the component SRF corresponding to the sechiba part of ORCHIDEE
+#-----------------------------------------------------------------
+function SRF_Initialize
+{
+    IGCM_debug_PushStack "SRF_Initialize"
+
+    ##- Define variable DefSuffix set in orchidee.card
+    ##  This variable is used in orchidee.card to choose
+    ##  parameter file(orchidee.def_DefSuffix).
+    if [ ! X${orchidee_UserChoices_DefSuffix} = X ] ; then
+        DefSuffix=${orchidee_UserChoices_DefSuffix}
+    else
+        DefSuffix=Choi
+    fi
+
+    IGCM_debug_PopStack "SRF_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SRF_Update
+{
+    IGCM_debug_PushStack "SRF_Update"
+
+    ## 1. Modifications in orchidee.def parameter file
+
+    # Activate STOMATE if the compontent SBG=stomate is set in config.card
+    if [ X${config_ListOfComponents_SBG} = Xstomate ] ; then
+	# Activate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE y
+    else
+	# Deactivate stomate in orchidee.def
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_OK_STOMATE n
+	# Deactivate output files for stomate
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq 1mo
+        IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq 1mo
+    fi
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -ne 1 ] || [ "${config_SRF_Restart}" != "n" ] ) ; then
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in sechiba_rest_in.nc
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def SECHIBA_restart_in NONE
+    fi
+
+    # Set VEGET_UPDATE=1Y in orchidee.def if VEGET_UPDATE_at_start=y in orchidee.card and if it is the first cumul periond (start of new simulation)
+    if [ X${orchidee_UserChoices_VEGET_UPDATE_at_start} = Xy ] && [ ${CumulPeriod} -eq 1 ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   1Y
+    fi
+
+    # Modify in orchidee.def VEGET_UPDATE if it is set in orchidee.card section UserChoices
+    # Note: if the variable has been set by VEGET_UPDATE_at_start, this section will not overwrite it.
+    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y
+    fi
+
+    # Set LAI_MAP in orchidee.def acording to value set in orchidee.card section UserChoices
+    # If LAI_MAP is not definded in orchidee.card, set default value n
+    # Note: this option is only read by ORCHIDEE if starting without restart files
+    if [ ! X${orchidee_UserChoices_LAI_MAP} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   ${orchidee_UserChoices_LAI_MAP}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   DEFAULT
+    fi
+
+    # Set DO_WOOD_HARVEST in orchidee.def acording to value set in orchidee.card section UserChoices
+    # If DO_WOOD_HARVEST is not definded in orchidee.card, set default value y
+    if [ ! X${orchidee_UserChoices_DO_WOOD_HARVEST} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST   ${orchidee_UserChoices_DO_WOOD_HARVEST}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def DO_WOOD_HARVEST   DEFAULT
+    fi
+
+    # Activate creation of river description file only for the first period
+    if [ ${CumulPeriod} -eq 1 ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC y
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def RIVER_DESC n
+    fi
+
+
+    ## 2. Mangement of output and modifications of related xml files
+    # Modify file_def_orchidee.xml file using settings from orchidee.card
+    # We here suppose that for each file, in orchidee.card UserChoices section, if the parameter 
+    # output_level_filename is set, then also output_freq_filename must be set. The existance of output_freq_filename will not be checked. 
+    # If output_level_filename=NONE or if it is not set, the corresponding file will be deactivated.
+    # Settings in config.card WriteFrequency are not used any more.
+    
+    if [ X${orchidee_UserChoices_output_level_sechiba_history} = X ] || [ X${orchidee_UserChoices_output_level_sechiba_history} = XNONE ] ; then
+	# output_level_sechiba_history is not set in orchidee.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_level ${orchidee_UserChoices_output_level_sechiba_history}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba1 output_freq  ${orchidee_UserChoices_output_freq_sechiba_history}
+    fi
+    
+    if [ X${orchidee_UserChoices_output_level_sechiba_out_2} = X ] || [ X${orchidee_UserChoices_output_level_sechiba_out_2} = XNONE ] ; then
+	# output_level_sechiba_out_2 is not set in orchidee.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_level ${orchidee_UserChoices_output_level_sechiba_out_2}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba2 output_freq  ${orchidee_UserChoices_output_freq_sechiba_out_2}
+    fi
+    
+    if [ X${orchidee_UserChoices_output_level_sechiba_history_4dim} = X ] || [ X${orchidee_UserChoices_output_level_sechiba_history_4dim} = XNONE ] ; then
+	# output_level_sechiba_history_4dim is not set in orchidee.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_level ${orchidee_UserChoices_output_level_sechiba_history_4dim}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml sechiba3 output_freq  ${orchidee_UserChoices_output_freq_sechiba_history_4dim}
+    fi
+        
+
+    # Add include of orchidee context in iodef.xml
+    # In iodef.xml add on the next line after "COMPONENT CONTEXT"
+    echo '<context id="orchidee" src="./context_orchidee.xml"/>' > add.tmp
+    # Add inclusion of file context_input_orchidee.xml if this file exists
+    if [ -f context_input_orchidee.xml ] ; then
+        echo '<context id="orchidee" src="./context_input_orchidee.xml"/>' >> add.tmp
+    fi
+    # Include xml files for output configuration if running with workflow CMIP6
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+	echo '<context id="orchidee" src="./ping_orchidee.xml"/>' >> add.tmp
+	echo '<context id="orchidee" src="./dr2xml_orchidee.xml"/>' >> add.tmp
+    fi
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+    # Add LongName as global attribute in XIOS output files (if LongName is not empty)
+    if [ ! "X${config_UserChoices_LongName}" = "X" ] ; then
+	listfile=$(ls file_def*orchidee.xml)
+	echo "<variable id=\"LongName\" type=\"string\">${config_UserChoices_LongName}</variable>" > add.tmp
+	for file in ${listfile}
+	do
+	    cp ${file} ${file}.tmp
+	    sed -e "/<file id/r add.tmp" \
+		${file}.tmp > ${file}
+	    rm ${file}.tmp 
+	done 
+	rm add.tmp
+    fi
+
+
+    IGCM_debug_PopStack "SRF_Update"
+}
+
+#-----------------------------------------------------------------
+function SRF_Finalize
+{
+    IGCM_debug_PushStack "SRF_Finalize"
+
+    IGCM_debug_PopStack "SRF_Finalize"
+}
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/stomate.driver
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/stomate.driver	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/stomate.driver	(revision 5176)
@@ -0,0 +1,67 @@
+#!/bin/ksh
+
+#D- Driver for ORCHIDEE stomate component (SBG)
+
+#-----------------------------------------------------------------
+function SBG_Initialize
+{
+    IGCM_debug_PushStack "SBG_Initialize"
+
+    IGCM_debug_PopStack "SBG_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SBG_Update
+{
+    IGCM_debug_PushStack "SBG_Update"
+    
+    # Output management
+    # Modify file_def_orchidee.xml file using settings from stomate.card
+    # We here suppose that for each file, in stomate.card UserChoices section, if the parameter 
+    # output_level_filename is set, then also output_freq_filename must be set. The existance of output_freq_filename will not be checked. 
+    # If output_level_filename=NONE or if it is not set, the corresponding file will be deactivated.
+    
+    if [ X${stomate_UserChoices_output_level_stomate_history} = X ] || [ X${stomate_UserChoices_output_level_stomate_history} = XNONE ] ; then
+	# output_level_stomate_history is not set in stomate.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_level ${stomate_UserChoices_output_level_stomate_history}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate1 output_freq  ${stomate_UserChoices_output_freq_stomate_history}
+    fi
+    
+    if [ X${stomate_UserChoices_output_level_stomate_ipcc_history} = X ] || [ X${stomate_UserChoices_output_level_stomate_ipcc_history} = XNONE ] ; then
+	# output_level_stomate_ipcc_history is not set in stomate.card or it is set to NONE.
+	# Deactivate the file.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled .FALSE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_level 0
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq 1mo
+    else
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 enabled      .TRUE.
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_level ${stomate_UserChoices_output_level_stomate_ipcc_history}
+	IGCM_comp_modifyXmlFile nonblocker file_def_orchidee.xml stomate2 output_freq  ${stomate_UserChoices_output_freq_stomate_ipcc_history}
+    fi
+
+        
+
+    # Define in orchidee.def if restart file should be used
+    if ( [ ${CumulPeriod} -eq 1 ] && [ "${config_SBG_Restart}" = "n" ] ) ; then
+        echo "STOMATE : without restart"
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN NONE
+    else
+        IGCM_comp_modifyDefFile blocker orchidee.def STOMATE_RESTART_FILEIN stomate_rest_in.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Update"
+}
+
+#-----------------------------------------------------------------
+function SBG_Finalize
+{
+    IGCM_debug_PushStack "SBG_Finalize"
+    
+    IGCM_debug_PopStack "SBG_Finalize"
+}
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/xios.driver
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/xios.driver	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/DRIVER/xios.driver	(revision 5176)
@@ -0,0 +1,42 @@
+#!/bin/ksh
+#-----------------------------------
+function IOS_Initialize
+{ 
+    IGCM_debug_PushStack "IOS_Initialize"
+
+    echo INITIALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Initialize"
+}
+
+#-----------------------------------
+function IOS_Update
+{
+    IGCM_debug_PushStack "IOS_Update"
+
+    echo UPDATE IOS !!!
+# Activate server mode
+    IGCM_comp_modifyXmlFile force iodef.xml using_server NONE true
+
+# Activate 2nd server level for CMIP6 type experiments (CMIP6 workflow)
+    if [ X"$( echo ${config_UserChoices_ExpType} | grep CMIP6 )" != "X" ] ; then
+    IGCM_comp_modifyXmlFile force iodef.xml using_server2 NONE true
+    fi
+
+    if [ -f namcouple ] ; then
+	sed -e "s/2  LMDZ oceanx/3 LMDZ oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp 
+	IGCM_sys_Mv namcouple.tmp namcouple
+    fi
+
+    IGCM_debug_PopStack "IOS_Update"
+}
+
+#-----------------------------------
+function IOS_Finalize
+{
+    IGCM_debug_PushStack "IOS_Finalize"
+
+    echo FINALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Finalize"
+}
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 5176)
@@ -0,0 +1,3085 @@
+year    month  gridsum (PgC/mth)
+1751    01     0.00021
+1751    02     0.00021
+1751    03     0.00021
+1751    04     0.00021
+1751    05     0.00021
+1751    06     0.00021
+1751    07     0.00021
+1751    08     0.00021
+1751    09     0.00021
+1751    10     0.00021
+1751    11     0.00021
+1751    12     0.00021
+1752    01     0.00021
+1752    02     0.00021
+1752    03     0.00021
+1752    04     0.00021
+1752    05     0.00021
+1752    06     0.00021
+1752    07     0.00021
+1752    08     0.00021
+1752    09     0.00021
+1752    10     0.00021
+1752    11     0.00021
+1752    12     0.00021
+1753    01     0.00021
+1753    02     0.00021
+1753    03     0.00021
+1753    04     0.00021
+1753    05     0.00021
+1753    06     0.00021
+1753    07     0.00021
+1753    08     0.00021
+1753    09     0.00021
+1753    10     0.00021
+1753    11     0.00021
+1753    12     0.00021
+1754    01     0.00021
+1754    02     0.00021
+1754    03     0.00021
+1754    04     0.00021
+1754    05     0.00021
+1754    06     0.00021
+1754    07     0.00021
+1754    08     0.00021
+1754    09     0.00021
+1754    10     0.00021
+1754    11     0.00021
+1754    12     0.00021
+1755    01     0.00021
+1755    02     0.00021
+1755    03     0.00021
+1755    04     0.00021
+1755    05     0.00021
+1755    06     0.00021
+1755    07     0.00021
+1755    08     0.00021
+1755    09     0.00021
+1755    10     0.00021
+1755    11     0.00021
+1755    12     0.00021
+1756    01     0.00023
+1756    02     0.00023
+1756    03     0.00023
+1756    04     0.00023
+1756    05     0.00023
+1756    06     0.00023
+1756    07     0.00023
+1756    08     0.00023
+1756    09     0.00023
+1756    10     0.00023
+1756    11     0.00023
+1756    12     0.00023
+1757    01     0.00023
+1757    02     0.00023
+1757    03     0.00023
+1757    04     0.00023
+1757    05     0.00023
+1757    06     0.00023
+1757    07     0.00023
+1757    08     0.00023
+1757    09     0.00023
+1757    10     0.00023
+1757    11     0.00023
+1757    12     0.00023
+1758    01     0.00023
+1758    02     0.00023
+1758    03     0.00023
+1758    04     0.00023
+1758    05     0.00023
+1758    06     0.00023
+1758    07     0.00023
+1758    08     0.00023
+1758    09     0.00023
+1758    10     0.00023
+1758    11     0.00023
+1758    12     0.00023
+1759    01     0.00023
+1759    02     0.00023
+1759    03     0.00023
+1759    04     0.00023
+1759    05     0.00023
+1759    06     0.00023
+1759    07     0.00023
+1759    08     0.00023
+1759    09     0.00023
+1759    10     0.00023
+1759    11     0.00023
+1759    12     0.00023
+1760    01     0.00023
+1760    02     0.00023
+1760    03     0.00023
+1760    04     0.00023
+1760    05     0.00023
+1760    06     0.00023
+1760    07     0.00023
+1760    08     0.00023
+1760    09     0.00023
+1760    10     0.00023
+1760    11     0.00023
+1760    12     0.00023
+1761    01     0.00025
+1761    02     0.00025
+1761    03     0.00025
+1761    04     0.00025
+1761    05     0.00025
+1761    06     0.00025
+1761    07     0.00025
+1761    08     0.00025
+1761    09     0.00025
+1761    10     0.00025
+1761    11     0.00025
+1761    12     0.00025
+1762    01     0.00025
+1762    02     0.00025
+1762    03     0.00025
+1762    04     0.00025
+1762    05     0.00025
+1762    06     0.00025
+1762    07     0.00025
+1762    08     0.00025
+1762    09     0.00025
+1762    10     0.00025
+1762    11     0.00025
+1762    12     0.00025
+1763    01     0.00025
+1763    02     0.00025
+1763    03     0.00025
+1763    04     0.00025
+1763    05     0.00025
+1763    06     0.00025
+1763    07     0.00025
+1763    08     0.00025
+1763    09     0.00025
+1763    10     0.00025
+1763    11     0.00025
+1763    12     0.00025
+1764    01     0.00025
+1764    02     0.00025
+1764    03     0.00025
+1764    04     0.00025
+1764    05     0.00025
+1764    06     0.00025
+1764    07     0.00025
+1764    08     0.00025
+1764    09     0.00025
+1764    10     0.00025
+1764    11     0.00025
+1764    12     0.00025
+1765    01     0.00025
+1765    02     0.00025
+1765    03     0.00025
+1765    04     0.00025
+1765    05     0.00025
+1765    06     0.00025
+1765    07     0.00025
+1765    08     0.00025
+1765    09     0.00025
+1765    10     0.00025
+1765    11     0.00025
+1765    12     0.00025
+1766    01     0.00028
+1766    02     0.00028
+1766    03     0.00028
+1766    04     0.00028
+1766    05     0.00028
+1766    06     0.00028
+1766    07     0.00028
+1766    08     0.00028
+1766    09     0.00028
+1766    10     0.00028
+1766    11     0.00028
+1766    12     0.00028
+1767    01     0.00028
+1767    02     0.00028
+1767    03     0.00028
+1767    04     0.00028
+1767    05     0.00028
+1767    06     0.00028
+1767    07     0.00028
+1767    08     0.00028
+1767    09     0.00028
+1767    10     0.00028
+1767    11     0.00028
+1767    12     0.00028
+1768    01     0.00028
+1768    02     0.00028
+1768    03     0.00028
+1768    04     0.00028
+1768    05     0.00028
+1768    06     0.00028
+1768    07     0.00028
+1768    08     0.00028
+1768    09     0.00028
+1768    10     0.00028
+1768    11     0.00028
+1768    12     0.00028
+1769    01     0.00028
+1769    02     0.00028
+1769    03     0.00028
+1769    04     0.00028
+1769    05     0.00028
+1769    06     0.00028
+1769    07     0.00028
+1769    08     0.00028
+1769    09     0.00028
+1769    10     0.00028
+1769    11     0.00028
+1769    12     0.00028
+1770    01     0.00028
+1770    02     0.00028
+1770    03     0.00028
+1770    04     0.00028
+1770    05     0.00028
+1770    06     0.00028
+1770    07     0.00028
+1770    08     0.00028
+1770    09     0.00028
+1770    10     0.00028
+1770    11     0.00028
+1770    12     0.00028
+1771    01     0.00031
+1771    02     0.00031
+1771    03     0.00031
+1771    04     0.00031
+1771    05     0.00031
+1771    06     0.00031
+1771    07     0.00031
+1771    08     0.00031
+1771    09     0.00031
+1771    10     0.00031
+1771    11     0.00031
+1771    12     0.00031
+1772    01     0.00031
+1772    02     0.00031
+1772    03     0.00031
+1772    04     0.00031
+1772    05     0.00031
+1772    06     0.00031
+1772    07     0.00031
+1772    08     0.00031
+1772    09     0.00031
+1772    10     0.00031
+1772    11     0.00031
+1772    12     0.00031
+1773    01     0.00031
+1773    02     0.00031
+1773    03     0.00031
+1773    04     0.00031
+1773    05     0.00031
+1773    06     0.00031
+1773    07     0.00031
+1773    08     0.00031
+1773    09     0.00031
+1773    10     0.00031
+1773    11     0.00031
+1773    12     0.00031
+1774    01     0.00031
+1774    02     0.00031
+1774    03     0.00031
+1774    04     0.00031
+1774    05     0.00031
+1774    06     0.00031
+1774    07     0.00031
+1774    08     0.00031
+1774    09     0.00031
+1774    10     0.00031
+1774    11     0.00031
+1774    12     0.00031
+1775    01     0.00031
+1775    02     0.00031
+1775    03     0.00031
+1775    04     0.00031
+1775    05     0.00031
+1775    06     0.00031
+1775    07     0.00031
+1775    08     0.00031
+1775    09     0.00031
+1775    10     0.00031
+1775    11     0.00031
+1775    12     0.00031
+1776    01     0.00034
+1776    02     0.00034
+1776    03     0.00034
+1776    04     0.00034
+1776    05     0.00034
+1776    06     0.00034
+1776    07     0.00034
+1776    08     0.00034
+1776    09     0.00034
+1776    10     0.00034
+1776    11     0.00034
+1776    12     0.00034
+1777    01     0.00034
+1777    02     0.00034
+1777    03     0.00034
+1777    04     0.00034
+1777    05     0.00034
+1777    06     0.00034
+1777    07     0.00034
+1777    08     0.00034
+1777    09     0.00034
+1777    10     0.00034
+1777    11     0.00034
+1777    12     0.00034
+1778    01     0.00034
+1778    02     0.00034
+1778    03     0.00034
+1778    04     0.00034
+1778    05     0.00034
+1778    06     0.00034
+1778    07     0.00034
+1778    08     0.00034
+1778    09     0.00034
+1778    10     0.00034
+1778    11     0.00034
+1778    12     0.00034
+1779    01     0.00034
+1779    02     0.00034
+1779    03     0.00034
+1779    04     0.00034
+1779    05     0.00034
+1779    06     0.00034
+1779    07     0.00034
+1779    08     0.00034
+1779    09     0.00034
+1779    10     0.00034
+1779    11     0.00034
+1779    12     0.00034
+1780    01     0.00034
+1780    02     0.00034
+1780    03     0.00034
+1780    04     0.00034
+1780    05     0.00034
+1780    06     0.00034
+1780    07     0.00034
+1780    08     0.00034
+1780    09     0.00034
+1780    10     0.00034
+1780    11     0.00034
+1780    12     0.00034
+1781    01     0.00038
+1781    02     0.00038
+1781    03     0.00038
+1781    04     0.00038
+1781    05     0.00038
+1781    06     0.00038
+1781    07     0.00038
+1781    08     0.00038
+1781    09     0.00038
+1781    10     0.00038
+1781    11     0.00038
+1781    12     0.00038
+1782    01     0.00038
+1782    02     0.00038
+1782    03     0.00038
+1782    04     0.00038
+1782    05     0.00038
+1782    06     0.00038
+1782    07     0.00038
+1782    08     0.00038
+1782    09     0.00038
+1782    10     0.00038
+1782    11     0.00038
+1782    12     0.00038
+1783    01     0.00038
+1783    02     0.00038
+1783    03     0.00038
+1783    04     0.00038
+1783    05     0.00038
+1783    06     0.00038
+1783    07     0.00038
+1783    08     0.00038
+1783    09     0.00038
+1783    10     0.00038
+1783    11     0.00038
+1783    12     0.00038
+1784    01     0.00038
+1784    02     0.00038
+1784    03     0.00038
+1784    04     0.00038
+1784    05     0.00038
+1784    06     0.00038
+1784    07     0.00038
+1784    08     0.00038
+1784    09     0.00038
+1784    10     0.00038
+1784    11     0.00038
+1784    12     0.00038
+1785    01     0.00038
+1785    02     0.00038
+1785    03     0.00038
+1785    04     0.00038
+1785    05     0.00038
+1785    06     0.00038
+1785    07     0.00038
+1785    08     0.00038
+1785    09     0.00038
+1785    10     0.00038
+1785    11     0.00038
+1785    12     0.00038
+1786    01     0.00044
+1786    02     0.00044
+1786    03     0.00044
+1786    04     0.00044
+1786    05     0.00044
+1786    06     0.00044
+1786    07     0.00044
+1786    08     0.00044
+1786    09     0.00044
+1786    10     0.00044
+1786    11     0.00044
+1786    12     0.00044
+1787    01     0.00044
+1787    02     0.00044
+1787    03     0.00044
+1787    04     0.00044
+1787    05     0.00044
+1787    06     0.00044
+1787    07     0.00044
+1787    08     0.00044
+1787    09     0.00044
+1787    10     0.00044
+1787    11     0.00044
+1787    12     0.00044
+1788    01     0.00044
+1788    02     0.00044
+1788    03     0.00044
+1788    04     0.00044
+1788    05     0.00044
+1788    06     0.00044
+1788    07     0.00044
+1788    08     0.00044
+1788    09     0.00044
+1788    10     0.00044
+1788    11     0.00044
+1788    12     0.00044
+1789    01     0.00044
+1789    02     0.00044
+1789    03     0.00044
+1789    04     0.00044
+1789    05     0.00044
+1789    06     0.00044
+1789    07     0.00044
+1789    08     0.00044
+1789    09     0.00044
+1789    10     0.00044
+1789    11     0.00044
+1789    12     0.00044
+1790    01     0.00044
+1790    02     0.00044
+1790    03     0.00044
+1790    04     0.00044
+1790    05     0.00044
+1790    06     0.00044
+1790    07     0.00044
+1790    08     0.00044
+1790    09     0.00044
+1790    10     0.00044
+1790    11     0.00044
+1790    12     0.00044
+1791    01     0.00049
+1791    02     0.00049
+1791    03     0.00049
+1791    04     0.00049
+1791    05     0.00049
+1791    06     0.00049
+1791    07     0.00049
+1791    08     0.00049
+1791    09     0.00049
+1791    10     0.00049
+1791    11     0.00049
+1791    12     0.00049
+1792    01     0.00050
+1792    02     0.00050
+1792    03     0.00050
+1792    04     0.00050
+1792    05     0.00050
+1792    06     0.00050
+1792    07     0.00050
+1792    08     0.00050
+1792    09     0.00050
+1792    10     0.00050
+1792    11     0.00050
+1792    12     0.00050
+1793    01     0.00050
+1793    02     0.00050
+1793    03     0.00050
+1793    04     0.00050
+1793    05     0.00050
+1793    06     0.00050
+1793    07     0.00050
+1793    08     0.00050
+1793    09     0.00050
+1793    10     0.00050
+1793    11     0.00050
+1793    12     0.00050
+1794    01     0.00050
+1794    02     0.00050
+1794    03     0.00050
+1794    04     0.00050
+1794    05     0.00050
+1794    06     0.00050
+1794    07     0.00050
+1794    08     0.00050
+1794    09     0.00050
+1794    10     0.00050
+1794    11     0.00050
+1794    12     0.00050
+1795    01     0.00050
+1795    02     0.00050
+1795    03     0.00050
+1795    04     0.00050
+1795    05     0.00050
+1795    06     0.00050
+1795    07     0.00050
+1795    08     0.00050
+1795    09     0.00050
+1795    10     0.00050
+1795    11     0.00050
+1795    12     0.00050
+1796    01     0.00052
+1796    02     0.00052
+1796    03     0.00052
+1796    04     0.00052
+1796    05     0.00052
+1796    06     0.00052
+1796    07     0.00052
+1796    08     0.00052
+1796    09     0.00052
+1796    10     0.00052
+1796    11     0.00052
+1796    12     0.00052
+1797    01     0.00055
+1797    02     0.00055
+1797    03     0.00055
+1797    04     0.00055
+1797    05     0.00055
+1797    06     0.00055
+1797    07     0.00055
+1797    08     0.00055
+1797    09     0.00055
+1797    10     0.00055
+1797    11     0.00055
+1797    12     0.00055
+1798    01     0.00057
+1798    02     0.00057
+1798    03     0.00057
+1798    04     0.00057
+1798    05     0.00057
+1798    06     0.00057
+1798    07     0.00057
+1798    08     0.00057
+1798    09     0.00057
+1798    10     0.00057
+1798    11     0.00057
+1798    12     0.00057
+1799    01     0.00060
+1799    02     0.00060
+1799    03     0.00060
+1799    04     0.00060
+1799    05     0.00060
+1799    06     0.00060
+1799    07     0.00060
+1799    08     0.00060
+1799    09     0.00060
+1799    10     0.00060
+1799    11     0.00060
+1799    12     0.00060
+1800    01     0.00064
+1800    02     0.00064
+1800    03     0.00064
+1800    04     0.00064
+1800    05     0.00064
+1800    06     0.00064
+1800    07     0.00064
+1800    08     0.00064
+1800    09     0.00064
+1800    10     0.00064
+1800    11     0.00064
+1800    12     0.00064
+1801    01     0.00064
+1801    02     0.00064
+1801    03     0.00064
+1801    04     0.00064
+1801    05     0.00064
+1801    06     0.00064
+1801    07     0.00064
+1801    08     0.00064
+1801    09     0.00064
+1801    10     0.00064
+1801    11     0.00064
+1801    12     0.00064
+1802    01     0.00084
+1802    02     0.00084
+1802    03     0.00084
+1802    04     0.00084
+1802    05     0.00084
+1802    06     0.00084
+1802    07     0.00084
+1802    08     0.00084
+1802    09     0.00084
+1802    10     0.00084
+1802    11     0.00084
+1802    12     0.00084
+1803    01     0.00072
+1803    02     0.00072
+1803    03     0.00072
+1803    04     0.00072
+1803    05     0.00072
+1803    06     0.00072
+1803    07     0.00072
+1803    08     0.00072
+1803    09     0.00072
+1803    10     0.00072
+1803    11     0.00072
+1803    12     0.00072
+1804    01     0.00078
+1804    02     0.00078
+1804    03     0.00078
+1804    04     0.00078
+1804    05     0.00078
+1804    06     0.00078
+1804    07     0.00078
+1804    08     0.00078
+1804    09     0.00078
+1804    10     0.00078
+1804    11     0.00078
+1804    12     0.00078
+1805    01     0.00076
+1805    02     0.00076
+1805    03     0.00076
+1805    04     0.00076
+1805    05     0.00076
+1805    06     0.00076
+1805    07     0.00076
+1805    08     0.00076
+1805    09     0.00076
+1805    10     0.00076
+1805    11     0.00076
+1805    12     0.00076
+1806    01     0.00080
+1806    02     0.00080
+1806    03     0.00080
+1806    04     0.00080
+1806    05     0.00080
+1806    06     0.00080
+1806    07     0.00080
+1806    08     0.00080
+1806    09     0.00080
+1806    10     0.00080
+1806    11     0.00080
+1806    12     0.00080
+1807    01     0.00084
+1807    02     0.00084
+1807    03     0.00084
+1807    04     0.00084
+1807    05     0.00084
+1807    06     0.00084
+1807    07     0.00084
+1807    08     0.00084
+1807    09     0.00084
+1807    10     0.00084
+1807    11     0.00084
+1807    12     0.00084
+1808    01     0.00080
+1808    02     0.00080
+1808    03     0.00080
+1808    04     0.00080
+1808    05     0.00080
+1808    06     0.00080
+1808    07     0.00080
+1808    08     0.00080
+1808    09     0.00080
+1808    10     0.00080
+1808    11     0.00080
+1808    12     0.00080
+1809    01     0.00080
+1809    02     0.00080
+1809    03     0.00080
+1809    04     0.00080
+1809    05     0.00080
+1809    06     0.00080
+1809    07     0.00080
+1809    08     0.00080
+1809    09     0.00080
+1809    10     0.00080
+1809    11     0.00080
+1809    12     0.00080
+1810    01     0.00085
+1810    02     0.00085
+1810    03     0.00085
+1810    04     0.00085
+1810    05     0.00085
+1810    06     0.00085
+1810    07     0.00085
+1810    08     0.00085
+1810    09     0.00085
+1810    10     0.00085
+1810    11     0.00085
+1810    12     0.00085
+1811    01     0.00090
+1811    02     0.00090
+1811    03     0.00090
+1811    04     0.00090
+1811    05     0.00090
+1811    06     0.00090
+1811    07     0.00090
+1811    08     0.00090
+1811    09     0.00090
+1811    10     0.00090
+1811    11     0.00090
+1811    12     0.00090
+1812    01     0.00093
+1812    02     0.00093
+1812    03     0.00093
+1812    04     0.00093
+1812    05     0.00093
+1812    06     0.00093
+1812    07     0.00093
+1812    08     0.00093
+1812    09     0.00093
+1812    10     0.00093
+1812    11     0.00093
+1812    12     0.00093
+1813    01     0.00094
+1813    02     0.00094
+1813    03     0.00094
+1813    04     0.00094
+1813    05     0.00094
+1813    06     0.00094
+1813    07     0.00094
+1813    08     0.00094
+1813    09     0.00094
+1813    10     0.00094
+1813    11     0.00094
+1813    12     0.00094
+1814    01     0.00096
+1814    02     0.00096
+1814    03     0.00096
+1814    04     0.00096
+1814    05     0.00096
+1814    06     0.00096
+1814    07     0.00096
+1814    08     0.00096
+1814    09     0.00096
+1814    10     0.00096
+1814    11     0.00096
+1814    12     0.00096
+1815    01     0.00099
+1815    02     0.00099
+1815    03     0.00099
+1815    04     0.00099
+1815    05     0.00099
+1815    06     0.00099
+1815    07     0.00099
+1815    08     0.00099
+1815    09     0.00099
+1815    10     0.00099
+1815    11     0.00099
+1815    12     0.00099
+1816    01     0.00108
+1816    02     0.00108
+1816    03     0.00108
+1816    04     0.00108
+1816    05     0.00108
+1816    06     0.00108
+1816    07     0.00108
+1816    08     0.00108
+1816    09     0.00108
+1816    10     0.00108
+1816    11     0.00108
+1816    12     0.00108
+1817    01     0.00112
+1817    02     0.00112
+1817    03     0.00112
+1817    04     0.00112
+1817    05     0.00112
+1817    06     0.00112
+1817    07     0.00112
+1817    08     0.00112
+1817    09     0.00112
+1817    10     0.00112
+1817    11     0.00112
+1817    12     0.00112
+1818    01     0.00113
+1818    02     0.00113
+1818    03     0.00113
+1818    04     0.00113
+1818    05     0.00113
+1818    06     0.00113
+1818    07     0.00113
+1818    08     0.00113
+1818    09     0.00113
+1818    10     0.00113
+1818    11     0.00113
+1818    12     0.00113
+1819    01     0.00114
+1819    02     0.00114
+1819    03     0.00114
+1819    04     0.00114
+1819    05     0.00114
+1819    06     0.00114
+1819    07     0.00114
+1819    08     0.00114
+1819    09     0.00114
+1819    10     0.00114
+1819    11     0.00114
+1819    12     0.00114
+1820    01     0.00115
+1820    02     0.00115
+1820    03     0.00115
+1820    04     0.00115
+1820    05     0.00115
+1820    06     0.00115
+1820    07     0.00115
+1820    08     0.00115
+1820    09     0.00115
+1820    10     0.00115
+1820    11     0.00115
+1820    12     0.00115
+1821    01     0.00117
+1821    02     0.00117
+1821    03     0.00117
+1821    04     0.00117
+1821    05     0.00117
+1821    06     0.00117
+1821    07     0.00117
+1821    08     0.00117
+1821    09     0.00117
+1821    10     0.00117
+1821    11     0.00117
+1821    12     0.00117
+1822    01     0.00122
+1822    02     0.00122
+1822    03     0.00122
+1822    04     0.00122
+1822    05     0.00122
+1822    06     0.00122
+1822    07     0.00122
+1822    08     0.00122
+1822    09     0.00122
+1822    10     0.00122
+1822    11     0.00122
+1822    12     0.00122
+1823    01     0.00129
+1823    02     0.00129
+1823    03     0.00129
+1823    04     0.00129
+1823    05     0.00129
+1823    06     0.00129
+1823    07     0.00129
+1823    08     0.00129
+1823    09     0.00129
+1823    10     0.00129
+1823    11     0.00129
+1823    12     0.00129
+1824    01     0.00133
+1824    02     0.00133
+1824    03     0.00133
+1824    04     0.00133
+1824    05     0.00133
+1824    06     0.00133
+1824    07     0.00133
+1824    08     0.00133
+1824    09     0.00133
+1824    10     0.00133
+1824    11     0.00133
+1824    12     0.00133
+1825    01     0.00138
+1825    02     0.00138
+1825    03     0.00138
+1825    04     0.00138
+1825    05     0.00138
+1825    06     0.00138
+1825    07     0.00138
+1825    08     0.00138
+1825    09     0.00138
+1825    10     0.00138
+1825    11     0.00138
+1825    12     0.00138
+1826    01     0.00140
+1826    02     0.00140
+1826    03     0.00140
+1826    04     0.00140
+1826    05     0.00140
+1826    06     0.00140
+1826    07     0.00140
+1826    08     0.00140
+1826    09     0.00140
+1826    10     0.00140
+1826    11     0.00140
+1826    12     0.00140
+1827    01     0.00150
+1827    02     0.00150
+1827    03     0.00150
+1827    04     0.00150
+1827    05     0.00150
+1827    06     0.00150
+1827    07     0.00150
+1827    08     0.00150
+1827    09     0.00150
+1827    10     0.00150
+1827    11     0.00150
+1827    12     0.00150
+1828    01     0.00152
+1828    02     0.00152
+1828    03     0.00152
+1828    04     0.00152
+1828    05     0.00152
+1828    06     0.00152
+1828    07     0.00152
+1828    08     0.00152
+1828    09     0.00152
+1828    10     0.00152
+1828    11     0.00152
+1828    12     0.00152
+1829    01     0.00151
+1829    02     0.00151
+1829    03     0.00151
+1829    04     0.00151
+1829    05     0.00151
+1829    06     0.00151
+1829    07     0.00151
+1829    08     0.00151
+1829    09     0.00151
+1829    10     0.00151
+1829    11     0.00151
+1829    12     0.00151
+1830    01     0.00203
+1830    02     0.00203
+1830    03     0.00203
+1830    04     0.00203
+1830    05     0.00203
+1830    06     0.00203
+1830    07     0.00203
+1830    08     0.00203
+1830    09     0.00203
+1830    10     0.00203
+1830    11     0.00203
+1830    12     0.00203
+1831    01     0.00192
+1831    02     0.00192
+1831    03     0.00192
+1831    04     0.00192
+1831    05     0.00192
+1831    06     0.00192
+1831    07     0.00192
+1831    08     0.00192
+1831    09     0.00192
+1831    10     0.00192
+1831    11     0.00192
+1831    12     0.00192
+1832    01     0.00194
+1832    02     0.00194
+1832    03     0.00194
+1832    04     0.00194
+1832    05     0.00194
+1832    06     0.00194
+1832    07     0.00194
+1832    08     0.00194
+1832    09     0.00194
+1832    10     0.00194
+1832    11     0.00194
+1832    12     0.00194
+1833    01     0.00197
+1833    02     0.00197
+1833    03     0.00197
+1833    04     0.00197
+1833    05     0.00197
+1833    06     0.00197
+1833    07     0.00197
+1833    08     0.00197
+1833    09     0.00197
+1833    10     0.00197
+1833    11     0.00197
+1833    12     0.00197
+1834    01     0.00201
+1834    02     0.00201
+1834    03     0.00201
+1834    04     0.00201
+1834    05     0.00201
+1834    06     0.00201
+1834    07     0.00201
+1834    08     0.00201
+1834    09     0.00201
+1834    10     0.00201
+1834    11     0.00201
+1834    12     0.00201
+1835    01     0.00206
+1835    02     0.00206
+1835    03     0.00206
+1835    04     0.00206
+1835    05     0.00206
+1835    06     0.00206
+1835    07     0.00206
+1835    08     0.00206
+1835    09     0.00206
+1835    10     0.00206
+1835    11     0.00206
+1835    12     0.00206
+1836    01     0.00238
+1836    02     0.00238
+1836    03     0.00238
+1836    04     0.00238
+1836    05     0.00238
+1836    06     0.00238
+1836    07     0.00238
+1836    08     0.00238
+1836    09     0.00238
+1836    10     0.00238
+1836    11     0.00238
+1836    12     0.00238
+1837    01     0.00238
+1837    02     0.00238
+1837    03     0.00238
+1837    04     0.00238
+1837    05     0.00238
+1837    06     0.00238
+1837    07     0.00238
+1837    08     0.00238
+1837    09     0.00238
+1837    10     0.00238
+1837    11     0.00238
+1837    12     0.00238
+1838    01     0.00246
+1838    02     0.00246
+1838    03     0.00246
+1838    04     0.00246
+1838    05     0.00246
+1838    06     0.00246
+1838    07     0.00246
+1838    08     0.00246
+1838    09     0.00246
+1838    10     0.00246
+1838    11     0.00246
+1838    12     0.00246
+1839    01     0.00254
+1839    02     0.00254
+1839    03     0.00254
+1839    04     0.00254
+1839    05     0.00254
+1839    06     0.00254
+1839    07     0.00254
+1839    08     0.00254
+1839    09     0.00254
+1839    10     0.00254
+1839    11     0.00254
+1839    12     0.00254
+1840    01     0.00271
+1840    02     0.00271
+1840    03     0.00271
+1840    04     0.00271
+1840    05     0.00271
+1840    06     0.00271
+1840    07     0.00271
+1840    08     0.00271
+1840    09     0.00271
+1840    10     0.00271
+1840    11     0.00271
+1840    12     0.00271
+1841    01     0.00279
+1841    02     0.00279
+1841    03     0.00279
+1841    04     0.00279
+1841    05     0.00279
+1841    06     0.00279
+1841    07     0.00279
+1841    08     0.00279
+1841    09     0.00279
+1841    10     0.00279
+1841    11     0.00279
+1841    12     0.00279
+1842    01     0.00295
+1842    02     0.00295
+1842    03     0.00295
+1842    04     0.00295
+1842    05     0.00295
+1842    06     0.00295
+1842    07     0.00295
+1842    08     0.00295
+1842    09     0.00295
+1842    10     0.00295
+1842    11     0.00295
+1842    12     0.00295
+1843    01     0.00302
+1843    02     0.00302
+1843    03     0.00302
+1843    04     0.00302
+1843    05     0.00302
+1843    06     0.00302
+1843    07     0.00302
+1843    08     0.00302
+1843    09     0.00302
+1843    10     0.00302
+1843    11     0.00302
+1843    12     0.00302
+1844    01     0.00322
+1844    02     0.00322
+1844    03     0.00322
+1844    04     0.00322
+1844    05     0.00322
+1844    06     0.00322
+1844    07     0.00322
+1844    08     0.00322
+1844    09     0.00322
+1844    10     0.00322
+1844    11     0.00322
+1844    12     0.00322
+1845    01     0.00353
+1845    02     0.00353
+1845    03     0.00353
+1845    04     0.00353
+1845    05     0.00353
+1845    06     0.00353
+1845    07     0.00353
+1845    08     0.00353
+1845    09     0.00353
+1845    10     0.00353
+1845    11     0.00353
+1845    12     0.00353
+1846    01     0.00359
+1846    02     0.00359
+1846    03     0.00359
+1846    04     0.00359
+1846    05     0.00359
+1846    06     0.00359
+1846    07     0.00359
+1846    08     0.00359
+1846    09     0.00359
+1846    10     0.00359
+1846    11     0.00359
+1846    12     0.00359
+1847    01     0.00392
+1847    02     0.00392
+1847    03     0.00392
+1847    04     0.00392
+1847    05     0.00392
+1847    06     0.00392
+1847    07     0.00392
+1847    08     0.00392
+1847    09     0.00392
+1847    10     0.00392
+1847    11     0.00392
+1847    12     0.00392
+1848    01     0.00395
+1848    02     0.00395
+1848    03     0.00395
+1848    04     0.00395
+1848    05     0.00395
+1848    06     0.00395
+1848    07     0.00395
+1848    08     0.00395
+1848    09     0.00395
+1848    10     0.00395
+1848    11     0.00395
+1848    12     0.00395
+1849    01     0.00417
+1849    02     0.00417
+1849    03     0.00417
+1849    04     0.00417
+1849    05     0.00417
+1849    06     0.00417
+1849    07     0.00417
+1849    08     0.00417
+1849    09     0.00417
+1849    10     0.00417
+1849    11     0.00417
+1849    12     0.00417
+1850    01     0.00448
+1850    02     0.00448
+1850    03     0.00448
+1850    04     0.00448
+1850    05     0.00448
+1850    06     0.00448
+1850    07     0.00448
+1850    08     0.00448
+1850    09     0.00448
+1850    10     0.00448
+1850    11     0.00448
+1850    12     0.00448
+1851    01     0.00452
+1851    02     0.00452
+1851    03     0.00452
+1851    04     0.00452
+1851    05     0.00452
+1851    06     0.00452
+1851    07     0.00452
+1851    08     0.00452
+1851    09     0.00452
+1851    10     0.00452
+1851    11     0.00452
+1851    12     0.00452
+1852    01     0.00472
+1852    02     0.00472
+1852    03     0.00472
+1852    04     0.00472
+1852    05     0.00472
+1852    06     0.00472
+1852    07     0.00472
+1852    08     0.00472
+1852    09     0.00472
+1852    10     0.00472
+1852    11     0.00472
+1852    12     0.00472
+1853    01     0.00494
+1853    02     0.00494
+1853    03     0.00494
+1853    04     0.00494
+1853    05     0.00494
+1853    06     0.00494
+1853    07     0.00494
+1853    08     0.00494
+1853    09     0.00494
+1853    10     0.00494
+1853    11     0.00494
+1853    12     0.00494
+1854    01     0.00580
+1854    02     0.00580
+1854    03     0.00580
+1854    04     0.00580
+1854    05     0.00580
+1854    06     0.00580
+1854    07     0.00580
+1854    08     0.00580
+1854    09     0.00580
+1854    10     0.00580
+1854    11     0.00580
+1854    12     0.00580
+1855    01     0.00592
+1855    02     0.00592
+1855    03     0.00592
+1855    04     0.00592
+1855    05     0.00592
+1855    06     0.00592
+1855    07     0.00592
+1855    08     0.00592
+1855    09     0.00592
+1855    10     0.00592
+1855    11     0.00592
+1855    12     0.00592
+1856    01     0.00631
+1856    02     0.00631
+1856    03     0.00631
+1856    04     0.00631
+1856    05     0.00631
+1856    06     0.00631
+1856    07     0.00631
+1856    08     0.00631
+1856    09     0.00631
+1856    10     0.00631
+1856    11     0.00631
+1856    12     0.00631
+1857    01     0.00637
+1857    02     0.00637
+1857    03     0.00637
+1857    04     0.00637
+1857    05     0.00637
+1857    06     0.00637
+1857    07     0.00637
+1857    08     0.00637
+1857    09     0.00637
+1857    10     0.00637
+1857    11     0.00637
+1857    12     0.00637
+1858    01     0.00646
+1858    02     0.00646
+1858    03     0.00646
+1858    04     0.00646
+1858    05     0.00646
+1858    06     0.00646
+1858    07     0.00646
+1858    08     0.00646
+1858    09     0.00646
+1858    10     0.00646
+1858    11     0.00646
+1858    12     0.00646
+1859    01     0.00685
+1859    02     0.00685
+1859    03     0.00685
+1859    04     0.00685
+1859    05     0.00685
+1859    06     0.00685
+1859    07     0.00685
+1859    08     0.00685
+1859    09     0.00685
+1859    10     0.00685
+1859    11     0.00685
+1859    12     0.00685
+1860    01     0.00752
+1860    02     0.00752
+1860    03     0.00752
+1860    04     0.00752
+1860    05     0.00752
+1860    06     0.00752
+1860    07     0.00752
+1860    08     0.00752
+1860    09     0.00752
+1860    10     0.00752
+1860    11     0.00752
+1860    12     0.00752
+1861    01     0.00791
+1861    02     0.00791
+1861    03     0.00791
+1861    04     0.00791
+1861    05     0.00791
+1861    06     0.00791
+1861    07     0.00791
+1861    08     0.00791
+1861    09     0.00791
+1861    10     0.00791
+1861    11     0.00791
+1861    12     0.00791
+1862    01     0.00805
+1862    02     0.00805
+1862    03     0.00805
+1862    04     0.00805
+1862    05     0.00805
+1862    06     0.00805
+1862    07     0.00805
+1862    08     0.00805
+1862    09     0.00805
+1862    10     0.00805
+1862    11     0.00805
+1862    12     0.00805
+1863    01     0.00860
+1863    02     0.00860
+1863    03     0.00860
+1863    04     0.00860
+1863    05     0.00860
+1863    06     0.00860
+1863    07     0.00860
+1863    08     0.00860
+1863    09     0.00860
+1863    10     0.00860
+1863    11     0.00860
+1863    12     0.00860
+1864    01     0.00926
+1864    02     0.00926
+1864    03     0.00926
+1864    04     0.00926
+1864    05     0.00926
+1864    06     0.00926
+1864    07     0.00926
+1864    08     0.00926
+1864    09     0.00926
+1864    10     0.00926
+1864    11     0.00926
+1864    12     0.00926
+1865    01     0.00983
+1865    02     0.00983
+1865    03     0.00983
+1865    04     0.00983
+1865    05     0.00983
+1865    06     0.00983
+1865    07     0.00983
+1865    08     0.00983
+1865    09     0.00983
+1865    10     0.00983
+1865    11     0.00983
+1865    12     0.00983
+1866    01     0.01014
+1866    02     0.01014
+1866    03     0.01014
+1866    04     0.01014
+1866    05     0.01014
+1866    06     0.01014
+1866    07     0.01014
+1866    08     0.01014
+1866    09     0.01014
+1866    10     0.01014
+1866    11     0.01014
+1866    12     0.01014
+1867    01     0.01087
+1867    02     0.01087
+1867    03     0.01087
+1867    04     0.01087
+1867    05     0.01087
+1867    06     0.01087
+1867    07     0.01087
+1867    08     0.01087
+1867    09     0.01087
+1867    10     0.01087
+1867    11     0.01087
+1867    12     0.01087
+1868    01     0.01116
+1868    02     0.01116
+1868    03     0.01116
+1868    04     0.01116
+1868    05     0.01116
+1868    06     0.01116
+1868    07     0.01116
+1868    08     0.01116
+1868    09     0.01116
+1868    10     0.01116
+1868    11     0.01116
+1868    12     0.01116
+1869    01     0.01185
+1869    02     0.01185
+1869    03     0.01185
+1869    04     0.01185
+1869    05     0.01185
+1869    06     0.01185
+1869    07     0.01185
+1869    08     0.01185
+1869    09     0.01185
+1869    10     0.01185
+1869    11     0.01185
+1869    12     0.01185
+1870    01     0.01211
+1870    02     0.01211
+1870    03     0.01211
+1870    04     0.01211
+1870    05     0.01211
+1870    06     0.01211
+1870    07     0.01211
+1870    08     0.01211
+1870    09     0.01211
+1870    10     0.01211
+1870    11     0.01211
+1870    12     0.01211
+1871    01     0.01288
+1871    02     0.01288
+1871    03     0.01288
+1871    04     0.01288
+1871    05     0.01288
+1871    06     0.01288
+1871    07     0.01288
+1871    08     0.01288
+1871    09     0.01288
+1871    10     0.01288
+1871    11     0.01288
+1871    12     0.01288
+1872    01     0.01425
+1872    02     0.01425
+1872    03     0.01425
+1872    04     0.01425
+1872    05     0.01425
+1872    06     0.01425
+1872    07     0.01425
+1872    08     0.01425
+1872    09     0.01425
+1872    10     0.01425
+1872    11     0.01425
+1872    12     0.01425
+1873    01     0.01513
+1873    02     0.01513
+1873    03     0.01513
+1873    04     0.01513
+1873    05     0.01513
+1873    06     0.01513
+1873    07     0.01513
+1873    08     0.01513
+1873    09     0.01513
+1873    10     0.01513
+1873    11     0.01513
+1873    12     0.01513
+1874    01     0.01417
+1874    02     0.01417
+1874    03     0.01417
+1874    04     0.01417
+1874    05     0.01417
+1874    06     0.01417
+1874    07     0.01417
+1874    08     0.01417
+1874    09     0.01417
+1874    10     0.01417
+1874    11     0.01417
+1874    12     0.01417
+1875    01     0.01537
+1875    02     0.01537
+1875    03     0.01537
+1875    04     0.01537
+1875    05     0.01537
+1875    06     0.01537
+1875    07     0.01537
+1875    08     0.01537
+1875    09     0.01537
+1875    10     0.01537
+1875    11     0.01537
+1875    12     0.01537
+1876    01     0.01559
+1876    02     0.01559
+1876    03     0.01559
+1876    04     0.01559
+1876    05     0.01559
+1876    06     0.01559
+1876    07     0.01559
+1876    08     0.01559
+1876    09     0.01559
+1876    10     0.01559
+1876    11     0.01559
+1876    12     0.01559
+1877    01     0.01590
+1877    02     0.01590
+1877    03     0.01590
+1877    04     0.01590
+1877    05     0.01590
+1877    06     0.01590
+1877    07     0.01590
+1877    08     0.01590
+1877    09     0.01590
+1877    10     0.01590
+1877    11     0.01590
+1877    12     0.01590
+1878    01     0.01602
+1878    02     0.01602
+1878    03     0.01602
+1878    04     0.01602
+1878    05     0.01602
+1878    06     0.01602
+1878    07     0.01602
+1878    08     0.01602
+1878    09     0.01602
+1878    10     0.01602
+1878    11     0.01602
+1878    12     0.01602
+1879    01     0.01717
+1879    02     0.01717
+1879    03     0.01717
+1879    04     0.01717
+1879    05     0.01717
+1879    06     0.01717
+1879    07     0.01717
+1879    08     0.01717
+1879    09     0.01717
+1879    10     0.01717
+1879    11     0.01717
+1879    12     0.01717
+1880    01     0.01942
+1880    02     0.01942
+1880    03     0.01942
+1880    04     0.01942
+1880    05     0.01942
+1880    06     0.01942
+1880    07     0.01942
+1880    08     0.01942
+1880    09     0.01942
+1880    10     0.01942
+1880    11     0.01942
+1880    12     0.01942
+1881    01     0.02007
+1881    02     0.02007
+1881    03     0.02007
+1881    04     0.02007
+1881    05     0.02007
+1881    06     0.02007
+1881    07     0.02007
+1881    08     0.02007
+1881    09     0.02007
+1881    10     0.02007
+1881    11     0.02007
+1881    12     0.02007
+1882    01     0.02120
+1882    02     0.02120
+1882    03     0.02120
+1882    04     0.02120
+1882    05     0.02120
+1882    06     0.02120
+1882    07     0.02120
+1882    08     0.02120
+1882    09     0.02120
+1882    10     0.02120
+1882    11     0.02120
+1882    12     0.02120
+1883    01     0.02255
+1883    02     0.02255
+1883    03     0.02255
+1883    04     0.02255
+1883    05     0.02255
+1883    06     0.02255
+1883    07     0.02255
+1883    08     0.02255
+1883    09     0.02255
+1883    10     0.02255
+1883    11     0.02255
+1883    12     0.02255
+1884    01     0.02280
+1884    02     0.02280
+1884    03     0.02280
+1884    04     0.02280
+1884    05     0.02280
+1884    06     0.02280
+1884    07     0.02280
+1884    08     0.02280
+1884    09     0.02280
+1884    10     0.02280
+1884    11     0.02280
+1884    12     0.02280
+1885    01     0.02297
+1885    02     0.02297
+1885    03     0.02297
+1885    04     0.02297
+1885    05     0.02297
+1885    06     0.02297
+1885    07     0.02297
+1885    08     0.02297
+1885    09     0.02297
+1885    10     0.02297
+1885    11     0.02297
+1885    12     0.02297
+1886    01     0.02333
+1886    02     0.02333
+1886    03     0.02333
+1886    04     0.02333
+1886    05     0.02333
+1886    06     0.02333
+1886    07     0.02333
+1886    08     0.02333
+1886    09     0.02333
+1886    10     0.02333
+1886    11     0.02333
+1886    12     0.02333
+1887    01     0.02450
+1887    02     0.02450
+1887    03     0.02450
+1887    04     0.02450
+1887    05     0.02450
+1887    06     0.02450
+1887    07     0.02450
+1887    08     0.02450
+1887    09     0.02450
+1887    10     0.02450
+1887    11     0.02450
+1887    12     0.02450
+1888    01     0.02712
+1888    02     0.02712
+1888    03     0.02712
+1888    04     0.02712
+1888    05     0.02712
+1888    06     0.02712
+1888    07     0.02712
+1888    08     0.02712
+1888    09     0.02712
+1888    10     0.02712
+1888    11     0.02712
+1888    12     0.02712
+1889    01     0.02711
+1889    02     0.02711
+1889    03     0.02711
+1889    04     0.02711
+1889    05     0.02711
+1889    06     0.02711
+1889    07     0.02711
+1889    08     0.02711
+1889    09     0.02711
+1889    10     0.02711
+1889    11     0.02711
+1889    12     0.02711
+1890    01     0.02954
+1890    02     0.02954
+1890    03     0.02954
+1890    04     0.02954
+1890    05     0.02954
+1890    06     0.02954
+1890    07     0.02954
+1890    08     0.02954
+1890    09     0.02954
+1890    10     0.02954
+1890    11     0.02954
+1890    12     0.02954
+1891    01     0.03092
+1891    02     0.03092
+1891    03     0.03092
+1891    04     0.03092
+1891    05     0.03092
+1891    06     0.03092
+1891    07     0.03092
+1891    08     0.03092
+1891    09     0.03092
+1891    10     0.03092
+1891    11     0.03092
+1891    12     0.03092
+1892    01     0.03117
+1892    02     0.03117
+1892    03     0.03117
+1892    04     0.03117
+1892    05     0.03117
+1892    06     0.03117
+1892    07     0.03117
+1892    08     0.03117
+1892    09     0.03117
+1892    10     0.03117
+1892    11     0.03117
+1892    12     0.03117
+1893    01     0.03080
+1893    02     0.03080
+1893    03     0.03080
+1893    04     0.03080
+1893    05     0.03080
+1893    06     0.03080
+1893    07     0.03080
+1893    08     0.03080
+1893    09     0.03080
+1893    10     0.03080
+1893    11     0.03080
+1893    12     0.03080
+1894    01     0.03187
+1894    02     0.03187
+1894    03     0.03187
+1894    04     0.03187
+1894    05     0.03187
+1894    06     0.03187
+1894    07     0.03187
+1894    08     0.03187
+1894    09     0.03187
+1894    10     0.03187
+1894    11     0.03187
+1894    12     0.03187
+1895    01     0.03380
+1895    02     0.03380
+1895    03     0.03380
+1895    04     0.03380
+1895    05     0.03380
+1895    06     0.03380
+1895    07     0.03380
+1895    08     0.03380
+1895    09     0.03380
+1895    10     0.03380
+1895    11     0.03380
+1895    12     0.03380
+1896    01     0.03490
+1896    02     0.03490
+1896    03     0.03490
+1896    04     0.03490
+1896    05     0.03490
+1896    06     0.03490
+1896    07     0.03490
+1896    08     0.03490
+1896    09     0.03490
+1896    10     0.03490
+1896    11     0.03490
+1896    12     0.03490
+1897    01     0.03655
+1897    02     0.03655
+1897    03     0.03655
+1897    04     0.03655
+1897    05     0.03655
+1897    06     0.03655
+1897    07     0.03655
+1897    08     0.03655
+1897    09     0.03655
+1897    10     0.03655
+1897    11     0.03655
+1897    12     0.03655
+1898    01     0.03855
+1898    02     0.03855
+1898    03     0.03855
+1898    04     0.03855
+1898    05     0.03855
+1898    06     0.03855
+1898    07     0.03855
+1898    08     0.03855
+1898    09     0.03855
+1898    10     0.03855
+1898    11     0.03855
+1898    12     0.03855
+1899    01     0.04212
+1899    02     0.04212
+1899    03     0.04212
+1899    04     0.04212
+1899    05     0.04212
+1899    06     0.04212
+1899    07     0.04212
+1899    08     0.04212
+1899    09     0.04212
+1899    10     0.04212
+1899    11     0.04212
+1899    12     0.04212
+1900    01     0.04443
+1900    02     0.04443
+1900    03     0.04443
+1900    04     0.04443
+1900    05     0.04443
+1900    06     0.04443
+1900    07     0.04443
+1900    08     0.04443
+1900    09     0.04443
+1900    10     0.04443
+1900    11     0.04443
+1900    12     0.04443
+1901    01     0.04590
+1901    02     0.04590
+1901    03     0.04590
+1901    04     0.04590
+1901    05     0.04590
+1901    06     0.04590
+1901    07     0.04590
+1901    08     0.04590
+1901    09     0.04590
+1901    10     0.04590
+1901    11     0.04590
+1901    12     0.04590
+1902    01     0.04706
+1902    02     0.04706
+1902    03     0.04706
+1902    04     0.04706
+1902    05     0.04706
+1902    06     0.04706
+1902    07     0.04706
+1902    08     0.04706
+1902    09     0.04706
+1902    10     0.04706
+1902    11     0.04706
+1902    12     0.04706
+1903    01     0.05134
+1903    02     0.05134
+1903    03     0.05134
+1903    04     0.05134
+1903    05     0.05134
+1903    06     0.05134
+1903    07     0.05134
+1903    08     0.05134
+1903    09     0.05134
+1903    10     0.05134
+1903    11     0.05134
+1903    12     0.05134
+1904    01     0.05188
+1904    02     0.05188
+1904    03     0.05188
+1904    04     0.05188
+1904    05     0.05188
+1904    06     0.05188
+1904    07     0.05188
+1904    08     0.05188
+1904    09     0.05188
+1904    10     0.05188
+1904    11     0.05188
+1904    12     0.05188
+1905    01     0.05524
+1905    02     0.05524
+1905    03     0.05524
+1905    04     0.05524
+1905    05     0.05524
+1905    06     0.05524
+1905    07     0.05524
+1905    08     0.05524
+1905    09     0.05524
+1905    10     0.05524
+1905    11     0.05524
+1905    12     0.05524
+1906    01     0.05802
+1906    02     0.05802
+1906    03     0.05802
+1906    04     0.05802
+1906    05     0.05802
+1906    06     0.05802
+1906    07     0.05802
+1906    08     0.05802
+1906    09     0.05802
+1906    10     0.05802
+1906    11     0.05802
+1906    12     0.05802
+1907    01     0.06561
+1907    02     0.06561
+1907    03     0.06561
+1907    04     0.06561
+1907    05     0.06561
+1907    06     0.06561
+1907    07     0.06561
+1907    08     0.06561
+1907    09     0.06561
+1907    10     0.06561
+1907    11     0.06561
+1907    12     0.06561
+1908    01     0.06313
+1908    02     0.06313
+1908    03     0.06313
+1908    04     0.06313
+1908    05     0.06313
+1908    06     0.06313
+1908    07     0.06313
+1908    08     0.06313
+1908    09     0.06313
+1908    10     0.06313
+1908    11     0.06313
+1908    12     0.06313
+1909    01     0.06562
+1909    02     0.06562
+1909    03     0.06562
+1909    04     0.06562
+1909    05     0.06562
+1909    06     0.06562
+1909    07     0.06562
+1909    08     0.06562
+1909    09     0.06562
+1909    10     0.06562
+1909    11     0.06562
+1909    12     0.06562
+1910    01     0.06882
+1910    02     0.06882
+1910    03     0.06882
+1910    04     0.06882
+1910    05     0.06882
+1910    06     0.06882
+1910    07     0.06882
+1910    08     0.06882
+1910    09     0.06882
+1910    10     0.06882
+1910    11     0.06882
+1910    12     0.06882
+1911    01     0.07008
+1911    02     0.07008
+1911    03     0.07008
+1911    04     0.07008
+1911    05     0.07008
+1911    06     0.07008
+1911    07     0.07008
+1911    08     0.07008
+1911    09     0.07008
+1911    10     0.07008
+1911    11     0.07008
+1911    12     0.07008
+1912    01     0.07339
+1912    02     0.07339
+1912    03     0.07339
+1912    04     0.07339
+1912    05     0.07339
+1912    06     0.07339
+1912    07     0.07339
+1912    08     0.07339
+1912    09     0.07339
+1912    10     0.07339
+1912    11     0.07339
+1912    12     0.07339
+1913    01     0.07941
+1913    02     0.07941
+1913    03     0.07941
+1913    04     0.07941
+1913    05     0.07941
+1913    06     0.07941
+1913    07     0.07941
+1913    08     0.07941
+1913    09     0.07941
+1913    10     0.07941
+1913    11     0.07941
+1913    12     0.07941
+1914    01     0.07205
+1914    02     0.07205
+1914    03     0.07205
+1914    04     0.07205
+1914    05     0.07205
+1914    06     0.07205
+1914    07     0.07205
+1914    08     0.07205
+1914    09     0.07205
+1914    10     0.07205
+1914    11     0.07205
+1914    12     0.07205
+1915    01     0.07108
+1915    02     0.07108
+1915    03     0.07108
+1915    04     0.07108
+1915    05     0.07108
+1915    06     0.07108
+1915    07     0.07108
+1915    08     0.07108
+1915    09     0.07108
+1915    10     0.07108
+1915    11     0.07108
+1915    12     0.07108
+1916    01     0.07670
+1916    02     0.07670
+1916    03     0.07670
+1916    04     0.07670
+1916    05     0.07670
+1916    06     0.07670
+1916    07     0.07670
+1916    08     0.07670
+1916    09     0.07670
+1916    10     0.07670
+1916    11     0.07670
+1916    12     0.07670
+1917    01     0.08025
+1917    02     0.08025
+1917    03     0.08025
+1917    04     0.08025
+1917    05     0.08025
+1917    06     0.08025
+1917    07     0.08025
+1917    08     0.08025
+1917    09     0.08025
+1917    10     0.08025
+1917    11     0.08025
+1917    12     0.08025
+1918    01     0.07916
+1918    02     0.07916
+1918    03     0.07916
+1918    04     0.07916
+1918    05     0.07916
+1918    06     0.07916
+1918    07     0.07916
+1918    08     0.07916
+1918    09     0.07916
+1918    10     0.07916
+1918    11     0.07916
+1918    12     0.07916
+1919    01     0.06861
+1919    02     0.06861
+1919    03     0.06861
+1919    04     0.06861
+1919    05     0.06861
+1919    06     0.06861
+1919    07     0.06861
+1919    08     0.06861
+1919    09     0.06861
+1919    10     0.06861
+1919    11     0.06861
+1919    12     0.06861
+1920    01     0.07978
+1920    02     0.07978
+1920    03     0.07978
+1920    04     0.07978
+1920    05     0.07978
+1920    06     0.07978
+1920    07     0.07978
+1920    08     0.07978
+1920    09     0.07978
+1920    10     0.07978
+1920    11     0.07978
+1920    12     0.07978
+1921    01     0.07000
+1921    02     0.07000
+1921    03     0.07000
+1921    04     0.07000
+1921    05     0.07000
+1921    06     0.07000
+1921    07     0.07000
+1921    08     0.07000
+1921    09     0.07000
+1921    10     0.07000
+1921    11     0.07000
+1921    12     0.07000
+1922    01     0.07340
+1922    02     0.07340
+1922    03     0.07340
+1922    04     0.07340
+1922    05     0.07340
+1922    06     0.07340
+1922    07     0.07340
+1922    08     0.07340
+1922    09     0.07340
+1922    10     0.07340
+1922    11     0.07340
+1922    12     0.07340
+1923    01     0.08328
+1923    02     0.08328
+1923    03     0.08328
+1923    04     0.08328
+1923    05     0.08328
+1923    06     0.08328
+1923    07     0.08328
+1923    08     0.08328
+1923    09     0.08328
+1923    10     0.08328
+1923    11     0.08328
+1923    12     0.08328
+1924    01     0.08355
+1924    02     0.08355
+1924    03     0.08355
+1924    04     0.08355
+1924    05     0.08355
+1924    06     0.08355
+1924    07     0.08355
+1924    08     0.08355
+1924    09     0.08355
+1924    10     0.08355
+1924    11     0.08355
+1924    12     0.08355
+1925    01     0.08413
+1925    02     0.08413
+1925    03     0.08413
+1925    04     0.08413
+1925    05     0.08413
+1925    06     0.08413
+1925    07     0.08413
+1925    08     0.08413
+1925    09     0.08413
+1925    10     0.08413
+1925    11     0.08413
+1925    12     0.08413
+1926    01     0.08283
+1926    02     0.08283
+1926    03     0.08283
+1926    04     0.08283
+1926    05     0.08283
+1926    06     0.08283
+1926    07     0.08283
+1926    08     0.08283
+1926    09     0.08283
+1926    10     0.08283
+1926    11     0.08283
+1926    12     0.08283
+1927    01     0.09046
+1927    02     0.09046
+1927    03     0.09046
+1927    04     0.09046
+1927    05     0.09046
+1927    06     0.09046
+1927    07     0.09046
+1927    08     0.09046
+1927    09     0.09046
+1927    10     0.09046
+1927    11     0.09046
+1927    12     0.09046
+1928    01     0.09077
+1928    02     0.09077
+1928    03     0.09077
+1928    04     0.09077
+1928    05     0.09077
+1928    06     0.09077
+1928    07     0.09077
+1928    08     0.09077
+1928    09     0.09077
+1928    10     0.09077
+1928    11     0.09077
+1928    12     0.09077
+1929    01     0.09759
+1929    02     0.09759
+1929    03     0.09759
+1929    04     0.09759
+1929    05     0.09759
+1929    06     0.09759
+1929    07     0.09759
+1929    08     0.09759
+1929    09     0.09759
+1929    10     0.09759
+1929    11     0.09759
+1929    12     0.09759
+1930    01     0.09022
+1930    02     0.09022
+1930    03     0.09022
+1930    04     0.09022
+1930    05     0.09022
+1930    06     0.09022
+1930    07     0.09022
+1930    08     0.09022
+1930    09     0.09022
+1930    10     0.09022
+1930    11     0.09022
+1930    12     0.09022
+1931    01     0.08058
+1931    02     0.08058
+1931    03     0.08058
+1931    04     0.08058
+1931    05     0.08058
+1931    06     0.08058
+1931    07     0.08058
+1931    08     0.08058
+1931    09     0.08058
+1931    10     0.08058
+1931    11     0.08058
+1931    12     0.08058
+1932    01     0.07270
+1932    02     0.07270
+1932    03     0.07270
+1932    04     0.07270
+1932    05     0.07270
+1932    06     0.07270
+1932    07     0.07270
+1932    08     0.07270
+1932    09     0.07270
+1932    10     0.07270
+1932    11     0.07270
+1932    12     0.07270
+1933    01     0.07655
+1933    02     0.07655
+1933    03     0.07655
+1933    04     0.07655
+1933    05     0.07655
+1933    06     0.07655
+1933    07     0.07655
+1933    08     0.07655
+1933    09     0.07655
+1933    10     0.07655
+1933    11     0.07655
+1933    12     0.07655
+1934    01     0.08328
+1934    02     0.08328
+1934    03     0.08328
+1934    04     0.08328
+1934    05     0.08328
+1934    06     0.08328
+1934    07     0.08328
+1934    08     0.08328
+1934    09     0.08328
+1934    10     0.08328
+1934    11     0.08328
+1934    12     0.08328
+1935    01     0.08748
+1935    02     0.08748
+1935    03     0.08748
+1935    04     0.08748
+1935    05     0.08748
+1935    06     0.08748
+1935    07     0.08748
+1935    08     0.08748
+1935    09     0.08748
+1935    10     0.08748
+1935    11     0.08748
+1935    12     0.08748
+1936    01     0.09606
+1936    02     0.09606
+1936    03     0.09606
+1936    04     0.09606
+1936    05     0.09606
+1936    06     0.09606
+1936    07     0.09606
+1936    08     0.09606
+1936    09     0.09606
+1936    10     0.09606
+1936    11     0.09606
+1936    12     0.09606
+1937    01     0.10287
+1937    02     0.10287
+1937    03     0.10287
+1937    04     0.10287
+1937    05     0.10287
+1937    06     0.10287
+1937    07     0.10287
+1937    08     0.10287
+1937    09     0.10287
+1937    10     0.10287
+1937    11     0.10287
+1937    12     0.10287
+1938    01     0.09700
+1938    02     0.09700
+1938    03     0.09700
+1938    04     0.09700
+1938    05     0.09700
+1938    06     0.09700
+1938    07     0.09700
+1938    08     0.09700
+1938    09     0.09700
+1938    10     0.09700
+1938    11     0.09700
+1938    12     0.09700
+1939    01     0.10242
+1939    02     0.10242
+1939    03     0.10242
+1939    04     0.10242
+1939    05     0.10242
+1939    06     0.10242
+1939    07     0.10242
+1939    08     0.10242
+1939    09     0.10242
+1939    10     0.10242
+1939    11     0.10242
+1939    12     0.10242
+1940    01     0.11154
+1940    02     0.11154
+1940    03     0.11154
+1940    04     0.11154
+1940    05     0.11154
+1940    06     0.11154
+1940    07     0.11154
+1940    08     0.11154
+1940    09     0.11154
+1940    10     0.11154
+1940    11     0.11154
+1940    12     0.11154
+1941    01     0.11428
+1941    02     0.11428
+1941    03     0.11428
+1941    04     0.11428
+1941    05     0.11428
+1941    06     0.11428
+1941    07     0.11428
+1941    08     0.11428
+1941    09     0.11428
+1941    10     0.11428
+1941    11     0.11428
+1941    12     0.11428
+1942    01     0.11463
+1942    02     0.11463
+1942    03     0.11463
+1942    04     0.11463
+1942    05     0.11463
+1942    06     0.11463
+1942    07     0.11463
+1942    08     0.11463
+1942    09     0.11463
+1942    10     0.11463
+1942    11     0.11463
+1942    12     0.11463
+1943    01     0.11864
+1943    02     0.11864
+1943    03     0.11864
+1943    04     0.11864
+1943    05     0.11864
+1943    06     0.11864
+1943    07     0.11864
+1943    08     0.11864
+1943    09     0.11864
+1943    10     0.11864
+1943    11     0.11864
+1943    12     0.11864
+1944    01     0.11784
+1944    02     0.11784
+1944    03     0.11784
+1944    04     0.11784
+1944    05     0.11784
+1944    06     0.11784
+1944    07     0.11784
+1944    08     0.11784
+1944    09     0.11784
+1944    10     0.11784
+1944    11     0.11784
+1944    12     0.11784
+1945    01     0.09856
+1945    02     0.09856
+1945    03     0.09856
+1945    04     0.09856
+1945    05     0.09856
+1945    06     0.09856
+1945    07     0.09856
+1945    08     0.09856
+1945    09     0.09856
+1945    10     0.09856
+1945    11     0.09856
+1945    12     0.09856
+1946    01     0.10759
+1946    02     0.10759
+1946    03     0.10759
+1946    04     0.10759
+1946    05     0.10759
+1946    06     0.10759
+1946    07     0.10759
+1946    08     0.10759
+1946    09     0.10759
+1946    10     0.10759
+1946    11     0.10759
+1946    12     0.10759
+1947    01     0.11910
+1947    02     0.11910
+1947    03     0.11910
+1947    04     0.11910
+1947    05     0.11910
+1947    06     0.11910
+1947    07     0.11910
+1947    08     0.11910
+1947    09     0.11910
+1947    10     0.11910
+1947    11     0.11910
+1947    12     0.11910
+1948    01     0.12530
+1948    02     0.12530
+1948    03     0.12530
+1948    04     0.12530
+1948    05     0.12530
+1948    06     0.12530
+1948    07     0.12530
+1948    08     0.12530
+1948    09     0.12530
+1948    10     0.12530
+1948    11     0.12530
+1948    12     0.12530
+1949    01     0.11929
+1949    02     0.11929
+1949    03     0.11929
+1949    04     0.11929
+1949    05     0.11929
+1949    06     0.11929
+1949    07     0.11929
+1949    08     0.11929
+1949    09     0.11929
+1949    10     0.11929
+1949    11     0.11929
+1949    12     0.11929
+1950    01     0.14254
+1950    02     0.13288
+1950    03     0.13844
+1950    04     0.12547
+1950    05     0.12480
+1950    06     0.12823
+1950    07     0.12979
+1950    08     0.12872
+1950    09     0.12622
+1950    10     0.13000
+1950    11     0.13141
+1950    12     0.14217
+1951    01     0.15935
+1951    02     0.14657
+1951    03     0.14810
+1951    04     0.13441
+1951    05     0.13222
+1951    06     0.13027
+1951    07     0.13662
+1951    08     0.13652
+1951    09     0.13530
+1951    10     0.14132
+1951    11     0.14085
+1951    12     0.15794
+1952    01     0.15159
+1952    02     0.14263
+1952    03     0.14879
+1952    04     0.13765
+1952    05     0.13726
+1952    06     0.13673
+1952    07     0.14019
+1952    08     0.14205
+1952    09     0.13916
+1952    10     0.14501
+1952    11     0.14389
+1952    12     0.15748
+1953    01     0.16150
+1953    02     0.15130
+1953    03     0.15798
+1953    04     0.14264
+1953    05     0.13798
+1953    06     0.13900
+1953    07     0.14448
+1953    08     0.14201
+1953    09     0.13874
+1953    10     0.14631
+1953    11     0.14672
+1953    12     0.16165
+1954    01     0.16274
+1954    02     0.14824
+1954    03     0.15601
+1954    04     0.14747
+1954    05     0.14321
+1954    06     0.14364
+1954    07     0.14835
+1954    08     0.14551
+1954    09     0.14580
+1954    10     0.14966
+1954    11     0.15296
+1954    12     0.16570
+1955    01     0.17489
+1955    02     0.16066
+1955    03     0.17040
+1955    04     0.15916
+1955    05     0.15753
+1955    06     0.15754
+1955    07     0.16206
+1955    08     0.16271
+1955    09     0.15875
+1955    10     0.16526
+1955    11     0.16975
+1955    12     0.18225
+1956    01     0.19891
+1956    02     0.17797
+1956    03     0.18326
+1956    04     0.16506
+1956    05     0.16554
+1956    06     0.16120
+1956    07     0.16987
+1956    08     0.16807
+1956    09     0.16650
+1956    10     0.17674
+1956    11     0.18014
+1956    12     0.19515
+1957    01     0.19233
+1957    02     0.17574
+1957    03     0.18620
+1957    04     0.17130
+1957    05     0.17455
+1957    06     0.17333
+1957    07     0.17941
+1957    08     0.17922
+1957    09     0.17465
+1957    10     0.18372
+1957    11     0.18318
+1957    12     0.20018
+1958    01     0.20399
+1958    02     0.18578
+1958    03     0.19684
+1958    04     0.18037
+1958    05     0.17910
+1958    06     0.17435
+1958    07     0.17993
+1958    08     0.18173
+1958    09     0.17834
+1958    10     0.18602
+1958    11     0.18856
+1958    12     0.20723
+1959    01     0.21650
+1959    02     0.19742
+1959    03     0.20628
+1959    04     0.19101
+1959    05     0.18853
+1959    06     0.18435
+1959    07     0.19125
+1959    08     0.19295
+1959    09     0.18788
+1959    10     0.19829
+1959    11     0.19904
+1959    12     0.21414
+1960    01     0.22003
+1960    02     0.20343
+1960    03     0.21871
+1960    04     0.20098
+1960    05     0.19659
+1960    06     0.19821
+1960    07     0.20283
+1960    08     0.20263
+1960    09     0.19895
+1960    10     0.20842
+1960    11     0.21132
+1960    12     0.23226
+1961    01     0.22145
+1961    02     0.20501
+1961    03     0.21897
+1961    04     0.20044
+1961    05     0.19788
+1961    06     0.19739
+1961    07     0.20320
+1961    08     0.20298
+1961    09     0.19990
+1961    10     0.20913
+1961    11     0.20972
+1961    12     0.23262
+1962    01     0.23263
+1962    02     0.21447
+1962    03     0.23114
+1962    04     0.20856
+1962    05     0.20389
+1962    06     0.20513
+1962    07     0.20702
+1962    08     0.21062
+1962    09     0.20466
+1962    10     0.21275
+1962    11     0.21745
+1962    12     0.23897
+1963    01     0.25173
+1963    02     0.22890
+1963    03     0.23960
+1963    04     0.21975
+1963    05     0.21415
+1963    06     0.21508
+1963    07     0.21858
+1963    08     0.21936
+1963    09     0.21833
+1963    10     0.22966
+1963    11     0.22872
+1963    12     0.25001
+1964    01     0.26367
+1964    02     0.23907
+1964    03     0.24564
+1964    04     0.23033
+1964    05     0.22285
+1964    06     0.22690
+1964    07     0.23369
+1964    08     0.23105
+1964    09     0.23182
+1964    10     0.24116
+1964    11     0.24041
+1964    12     0.26380
+1965    01     0.26961
+1965    02     0.24919
+1965    03     0.26443
+1965    04     0.24103
+1965    05     0.23849
+1965    06     0.23922
+1965    07     0.24427
+1965    08     0.24589
+1965    09     0.24054
+1965    10     0.25083
+1965    11     0.25314
+1965    12     0.26931
+1966    01     0.27757
+1966    02     0.26156
+1966    03     0.27639
+1966    04     0.25299
+1966    05     0.24907
+1966    06     0.25045
+1966    07     0.25721
+1966    08     0.25819
+1966    09     0.25031
+1966    10     0.25803
+1966    11     0.26634
+1966    12     0.28588
+1967    01     0.29057
+1967    02     0.26854
+1967    03     0.28371
+1967    04     0.26214
+1967    05     0.25662
+1967    06     0.25731
+1967    07     0.26185
+1967    08     0.26429
+1967    09     0.26004
+1967    10     0.27074
+1967    11     0.27184
+1967    12     0.29417
+1968    01     0.30937
+1968    02     0.28586
+1968    03     0.29983
+1968    04     0.27441
+1968    05     0.27032
+1968    06     0.27244
+1968    07     0.27511
+1968    08     0.27604
+1968    09     0.27467
+1968    10     0.28513
+1968    11     0.28733
+1968    12     0.31106
+1969    01     0.32687
+1969    02     0.30360
+1969    03     0.31995
+1969    04     0.29428
+1969    05     0.28947
+1969    06     0.29128
+1969    07     0.29507
+1969    08     0.29676
+1969    09     0.29160
+1969    10     0.30338
+1969    11     0.30576
+1969    12     0.33040
+1970    01     0.35044
+1970    02     0.32520
+1970    03     0.34326
+1970    04     0.32017
+1970    05     0.31528
+1970    06     0.31787
+1970    07     0.32351
+1970    08     0.32331
+1970    09     0.31418
+1970    10     0.32918
+1970    11     0.33251
+1970    12     0.35981
+1971    01     0.36660
+1971    02     0.33850
+1971    03     0.35976
+1971    04     0.33200
+1971    05     0.32836
+1971    06     0.32665
+1971    07     0.33442
+1971    08     0.33709
+1971    09     0.32410
+1971    10     0.34196
+1971    11     0.34696
+1971    12     0.37605
+1972    01     0.37912
+1972    02     0.35696
+1972    03     0.37960
+1972    04     0.34507
+1972    05     0.34246
+1972    06     0.34484
+1972    07     0.35058
+1972    08     0.35603
+1972    09     0.34233
+1972    10     0.35530
+1972    11     0.35720
+1972    12     0.39016
+1973    01     0.39642
+1973    02     0.37592
+1973    03     0.40179
+1973    04     0.36549
+1973    05     0.36229
+1973    06     0.36406
+1973    07     0.36994
+1973    08     0.37289
+1973    09     0.36206
+1973    10     0.37974
+1973    11     0.38227
+1973    12     0.41065
+1974    01     0.40205
+1974    02     0.37961
+1974    03     0.39627
+1974    04     0.36430
+1974    05     0.35815
+1974    06     0.35885
+1974    07     0.36762
+1974    08     0.36800
+1974    09     0.36202
+1974    10     0.37656
+1974    11     0.38110
+1974    12     0.41320
+1975    01     0.40312
+1975    02     0.37405
+1975    03     0.39671
+1975    04     0.36505
+1975    05     0.35863
+1975    06     0.35880
+1975    07     0.36848
+1975    08     0.37240
+1975    09     0.35946
+1975    10     0.37848
+1975    11     0.38342
+1975    12     0.41149
+1976    01     0.42405
+1976    02     0.39429
+1976    03     0.41667
+1976    04     0.38470
+1976    05     0.38014
+1976    06     0.37740
+1976    07     0.38619
+1976    08     0.39273
+1976    09     0.37698
+1976    10     0.40133
+1976    11     0.40265
+1976    12     0.44093
+1977    01     0.43427
+1977    02     0.40397
+1977    03     0.42718
+1977    04     0.39226
+1977    05     0.38731
+1977    06     0.39141
+1977    07     0.39709
+1977    08     0.39983
+1977    09     0.39052
+1977    10     0.41031
+1977    11     0.41519
+1977    12     0.45146
+1978    01     0.45106
+1978    02     0.41714
+1978    03     0.44740
+1978    04     0.41410
+1978    05     0.40291
+1978    06     0.40450
+1978    07     0.41344
+1978    08     0.41321
+1978    09     0.40805
+1978    10     0.42730
+1978    11     0.42823
+1978    12     0.46653
+1979    01     0.46495
+1979    02     0.42913
+1979    03     0.45497
+1979    04     0.42205
+1979    05     0.41534
+1979    06     0.41431
+1979    07     0.42716
+1979    08     0.42901
+1979    09     0.42001
+1979    10     0.43717
+1979    11     0.43900
+1979    12     0.47400
+1980    01     0.46589
+1980    02     0.42724
+1980    03     0.45960
+1980    04     0.42578
+1980    05     0.41192
+1980    06     0.41260
+1980    07     0.41933
+1980    08     0.42124
+1980    09     0.41393
+1980    10     0.43051
+1980    11     0.43968
+1980    12     0.47852
+1981    01     0.45338
+1981    02     0.41805
+1981    03     0.44170
+1981    04     0.40981
+1981    05     0.40115
+1981    06     0.40423
+1981    07     0.41149
+1981    08     0.41173
+1981    09     0.40181
+1981    10     0.42606
+1981    11     0.42592
+1981    12     0.46301
+1982    01     0.45253
+1982    02     0.41620
+1982    03     0.44602
+1982    04     0.40994
+1982    05     0.40217
+1982    06     0.40362
+1982    07     0.40991
+1982    08     0.41227
+1982    09     0.40062
+1982    10     0.41919
+1982    11     0.42760
+1982    12     0.45191
+1983    01     0.44717
+1983    02     0.41003
+1983    03     0.44927
+1983    04     0.41086
+1983    05     0.40281
+1983    06     0.40599
+1983    07     0.41005
+1983    08     0.42237
+1983    09     0.40992
+1983    10     0.42786
+1983    11     0.43369
+1983    12     0.47775
+1984    01     0.46924
+1984    02     0.43782
+1984    03     0.46739
+1984    04     0.42628
+1984    05     0.42004
+1984    06     0.41940
+1984    07     0.42130
+1984    08     0.43029
+1984    09     0.41423
+1984    10     0.43852
+1984    11     0.44366
+1984    12     0.46897
+1985    01     0.49039
+1985    02     0.45125
+1985    03     0.47511
+1985    04     0.43721
+1985    05     0.42990
+1985    06     0.42791
+1985    07     0.43784
+1985    08     0.44033
+1985    09     0.43260
+1985    10     0.45930
+1985    11     0.45762
+1985    12     0.50171
+1986    01     0.49250
+1986    02     0.45605
+1986    03     0.48126
+1986    04     0.44691
+1986    05     0.43774
+1986    06     0.43678
+1986    07     0.45002
+1986    08     0.44552
+1986    09     0.43707
+1986    10     0.46278
+1986    11     0.46216
+1986    12     0.50839
+1987    01     0.50518
+1987    02     0.46531
+1987    03     0.49902
+1987    04     0.45700
+1987    05     0.44995
+1987    06     0.45930
+1987    07     0.46630
+1987    08     0.46879
+1987    09     0.45651
+1987    10     0.48036
+1987    11     0.47931
+1987    12     0.52508
+1988    01     0.52287
+1988    02     0.49020
+1988    03     0.52344
+1988    04     0.47681
+1988    05     0.46679
+1988    06     0.47468
+1988    07     0.47848
+1988    08     0.48788
+1988    09     0.46872
+1988    10     0.49329
+1988    11     0.50313
+1988    12     0.54784
+1989    01     0.52160
+1989    02     0.48900
+1989    03     0.52893
+1989    04     0.48100
+1989    05     0.47522
+1989    06     0.47870
+1989    07     0.48225
+1989    08     0.49235
+1989    09     0.47963
+1989    10     0.50682
+1989    11     0.51321
+1989    12     0.56321
+1990    01     0.52825
+1990    02     0.48003
+1990    03     0.52435
+1990    04     0.48222
+1990    05     0.47486
+1990    06     0.47687
+1990    07     0.48079
+1990    08     0.49310
+1990    09     0.47797
+1990    10     0.50034
+1990    11     0.50422
+1990    12     0.54897
+1991    01     0.54627
+1991    02     0.50384
+1991    03     0.54382
+1991    04     0.50221
+1991    05     0.49971
+1991    06     0.49047
+1991    07     0.49777
+1991    08     0.49794
+1991    09     0.48224
+1991    10     0.51357
+1991    11     0.51524
+1991    12     0.55837
+1992    01     0.53393
+1992    02     0.49643
+1992    03     0.52687
+1992    04     0.48699
+1992    05     0.47703
+1992    06     0.47369
+1992    07     0.48599
+1992    08     0.48282
+1992    09     0.47853
+1992    10     0.50745
+1992    11     0.51389
+1992    12     0.55485
+1993    01     0.52888
+1993    02     0.50462
+1993    03     0.54321
+1993    04     0.49169
+1993    05     0.47737
+1993    06     0.48059
+1993    07     0.49303
+1993    08     0.49487
+1993    09     0.48453
+1993    10     0.51108
+1993    11     0.52403
+1993    12     0.56392
+1994    01     0.54106
+1994    02     0.50750
+1994    03     0.53564
+1994    04     0.49246
+1994    05     0.48723
+1994    06     0.48884
+1994    07     0.49166
+1994    08     0.50242
+1994    09     0.48732
+1994    10     0.51256
+1994    11     0.51646
+1994    12     0.55960
+1995    01     0.54184
+1995    02     0.51069
+1995    03     0.54924
+1995    04     0.49775
+1995    05     0.50171
+1995    06     0.49361
+1995    07     0.50327
+1995    08     0.51184
+1995    09     0.49449
+1995    10     0.51557
+1995    11     0.53151
+1995    12     0.58021
+1996    01     0.56457
+1996    02     0.53318
+1996    03     0.56069
+1996    04     0.51202
+1996    05     0.51159
+1996    06     0.50331
+1996    07     0.51931
+1996    08     0.52037
+1996    09     0.50864
+1996    10     0.53560
+1996    11     0.54387
+1996    12     0.58743
+1997    01     0.56862
+1997    02     0.51754
+1997    03     0.55221
+1997    04     0.51650
+1997    05     0.51358
+1997    06     0.50622
+1997    07     0.52732
+1997    08     0.52530
+1997    09     0.51648
+1997    10     0.54894
+1997    11     0.54996
+1997    12     0.59650
+1998    01     0.55336
+1998    02     0.51716
+1998    03     0.55550
+1998    04     0.50978
+1998    05     0.50603
+1998    06     0.50691
+1998    07     0.51977
+1998    08     0.51804
+1998    09     0.50830
+1998    10     0.52917
+1998    11     0.53637
+1998    12     0.58201
+1999    01     0.55720
+1999    02     0.51202
+1999    03     0.55864
+1999    04     0.51028
+1999    05     0.50580
+1999    06     0.50608
+1999    07     0.51848
+1999    08     0.52092
+1999    09     0.50601
+1999    10     0.52726
+1999    11     0.53895
+1999    12     0.58005
+2000    01     0.57314
+2000    02     0.55079
+2000    03     0.57086
+2000    04     0.51994
+2000    05     0.52341
+2000    06     0.52229
+2000    07     0.52676
+2000    08     0.54093
+2000    09     0.52664
+2000    10     0.54410
+2000    11     0.55450
+2000    12     0.60297
+2001    01     0.58647
+2001    02     0.54321
+2001    03     0.58069
+2001    04     0.53177
+2001    05     0.53513
+2001    06     0.52555
+2001    07     0.53887
+2001    08     0.54453
+2001    09     0.52289
+2001    10     0.54891
+2001    11     0.55360
+2001    12     0.59173
+2002    01     0.59298
+2002    02     0.54028
+2002    03     0.57896
+2002    04     0.53894
+2002    05     0.53658
+2002    06     0.53557
+2002    07     0.55276
+2002    08     0.55043
+2002    09     0.53663
+2002    10     0.57000
+2002    11     0.57302
+2002    12     0.61363
+2003    01     0.62731
+2003    02     0.58055
+2003    03     0.60857
+2003    04     0.56092
+2003    05     0.55414
+2003    06     0.55420
+2003    07     0.56987
+2003    08     0.57205
+2003    09     0.55958
+2003    10     0.59610
+2003    11     0.60060
+2003    12     0.65321
+2004    01     0.64882
+2004    02     0.61456
+2004    03     0.64419
+2004    04     0.59265
+2004    05     0.58759
+2004    06     0.58463
+2004    07     0.59878
+2004    08     0.59835
+2004    09     0.59342
+2004    10     0.61716
+2004    11     0.62511
+2004    12     0.68284
+2005    01     0.67566
+2005    02     0.61536
+2005    03     0.66544
+2005    04     0.61158
+2005    05     0.60571
+2005    06     0.61097
+2005    07     0.61800
+2005    08     0.62523
+2005    09     0.61036
+2005    10     0.62953
+2005    11     0.64066
+2005    12     0.70520
+2006    01     0.67556
+2006    02     0.63269
+2006    03     0.68363
+2006    04     0.62148
+2006    05     0.62526
+2006    06     0.62507
+2006    07     0.64087
+2006    08     0.64627
+2006    09     0.63042
+2006    10     0.65911
+2006    11     0.66051
+2006    12     0.71582
+2007    01     0.69849
+2007    02     0.65680
+2007    03     0.69762
+2007    04     0.64523
+2007    05     0.64697
+2007    06     0.65051
+2007    07     0.65709
+2007    08     0.67078
+2007    09     0.64786
+2007    10     0.67711
+2007    11     0.68544
+2007    12     0.73625
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_actuel-old
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_actuel-old	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_actuel-old	(revision 5176)
@@ -0,0 +1,79 @@
+##  Cycle diurne  ou non                 
+iflag_cycle_diurne=1
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite (lue dans Eccentricity.txt)
+R_ecc = _AUTO_: DEFAULT = 0.016715
+### R_peri =     Equinoxe (lue dans Perihelie.txt)
+R_peri = _AUTO_: DEFAULT = 102.7
+### R_incl =     Inclinaison (lue dans Obliquity.txt)
+R_incl = _AUTO_: DEFAULT = 23.441
+### solaire =    Constante solaire
+#solaire = _AUTO_ : DEFAULT = 1366.0896
+solaire = _AUTO_ : DEFAULT = 1361.20 
+# solaire est modifie avec les valeurs du fichier SOLARANDVOLCANOES.txt
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm, l'annÃ©e 2000 forcage CMIP6
+co2_ppm = _AUTO_: DEFAULT = 3.6912e+02
+### co2_ppm_per =    taux 4xCO2 en ppm (uniqument pour calcul des diags)
+co2_ppm_per = _AUTO_: DEFAULT = 14.7648e+02
+### CH4_ppb =    taux CH4 en ppb, l'annÃ©e 2000 forcage CMIP6
+CH4_ppb = _AUTO_ : DEFAULT = 1.7780e+03
+### N2O_ppb =    taux N2O en ppb, l'annÃ©e 2000 forcage CMIP6
+N2O_ppb = _AUTO_ : DEFAULT = 3.1576e+02
+### CFC11_ppt = taux en ppt, l'annÃ©e 2000 forcage CFC11eq_CMIP6
+CFC11_ppt = _AUTO_ : DEFAULT = 6.3990e+01
+### CFC12_ppt =  taux en ppt, l'annÃ©e 2000 forcage CFC12eq_CMIP6
+CFC12_ppt = _AUTO_ : DEFAULT = 1.0511e+03
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# 
+# Aerosols stratospheriques utilises par defaut 
+flag_aerosol_strat=2
+# Diag VolMIP to get volcanic aerosols effects instead of tropospheric ones
+ok_volcan=n
+#
+# COSP
+ok_cosp=_AUTO_
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_annuel
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_annuel	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_annuel	(revision 5176)
@@ -0,0 +1,79 @@
+##  Cycle diurne  ou non                 
+iflag_cycle_diurne=1
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite (lue dans Eccentricity.txt)
+R_ecc = _AUTO_: DEFAULT = 0.016715
+### R_peri =     Equinoxe (lue dans Perihelie.txt)
+R_peri = _AUTO_: DEFAULT = 102.7
+### R_incl =     Inclinaison (lue dans Obliquity.txt)
+R_incl = _AUTO_: DEFAULT = 23.441
+### solaire =    Constante solaire
+#solaire = _AUTO_ : DEFAULT = 1366.0896
+solaire = _AUTO_ : DEFAULT = 1361.20 
+# solaire est modifie avec les valeurs du fichier SOLARANDVOLCANOES.txt
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm, l'annÃ©e 2000 forcage CMIP6
+co2_ppm = _AUTO_: DEFAULT = 3.6912e+02
+### co2_ppm_per =    taux 4xCO2 en ppm (uniqument pour calcul des diags)
+co2_ppm_per = _AUTO_: DEFAULT = 14.7648e+02
+### CH4_ppb =    taux CH4 en ppb, l'annÃ©e 2000 forcage CMIP6
+CH4_ppb = _AUTO_ : DEFAULT = 1.7780e+03
+### N2O_ppb =    taux N2O en ppb, l'annÃ©e 2000 forcage CMIP6
+N2O_ppb = _AUTO_ : DEFAULT = 3.1576e+02
+### CFC11_ppt = taux en ppt, l'annÃ©e 2000 forcage CFC11eq_CMIP6
+CFC11_ppt = _AUTO_ : DEFAULT = 6.3990e+01
+### CFC12_ppt =  taux en ppt, l'annÃ©e 2000 forcage CFC12eq_CMIP6
+CFC12_ppt = _AUTO_ : DEFAULT = 1.0511e+03
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=annuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# 
+# Aerosols stratospheriques utilises par defaut 
+flag_aerosol_strat=2
+# Diag VolMIP to get volcanic aerosols effects instead of tropospheric ones
+ok_volcan=n
+#
+# COSP
+ok_cosp=_AUTO_
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_annuel-old
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_annuel-old	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_annuel-old	(revision 5176)
@@ -0,0 +1,80 @@
+##  Cycle diurne  ou non                 
+iflag_cycle_diurne=1
+##  Soil Model  ou non               
+soil_model=y
+## Pas de temps de couplage (s).
+t_coupl=_AUTO_
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite (lue dans Eccentricity.txt)
+R_ecc = _AUTO_: DEFAULT = 0.016715
+### R_peri =     Equinoxe (lue dans Perihelie.txt)
+R_peri = _AUTO_: DEFAULT = 102.7
+### R_incl =     Inclinaison (lue dans Obliquity.txt)
+R_incl = _AUTO_: DEFAULT = 23.441
+### solaire =    Constante solaire
+# solaire est modifie avec les valeurs du fichier SOLARANDVOLCANOES.txt
+# solaire parameter est utilise uniquement avec si iflag_rrtm=0 et ok_suntime_rrtm=n
+solaire = _AUTO_: DEFAULT = 0.0 
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_
+### co2_ppm_per =    taux 4xCO2 en ppm (uniqument pour calcul des diags)
+co2_ppm_per = _AUTO_
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=annuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+#
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+# 
+# Aerosols stratospheriques utilises par defaut 
+flag_aerosol_strat=2
+# Diag VolMIP to get volcanic aerosols effects instead of tropospheric ones
+ok_volcan=n
+#
+# COSP
+ok_cosp=_AUTO_
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_preind
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_preind	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/config.def_preind	(revision 5176)
@@ -0,0 +1,81 @@
+##  Cycle diurne  ou non                 
+iflag_cycle_diurne=1
+
+## Pas de temps de couplage (s). 
+t_coupl=_AUTO_
+
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=16
+
+##  Facteur additif pour l'albedo
+pmagic =  _AUTO_: DEFAULT = 0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite (lue dans Eccentricity.txt)
+R_ecc = _AUTO_: DEFAULT = 0.016715
+### R_peri =     Equinoxe (lue dans Perihelie.txt)
+R_peri = _AUTO_: DEFAULT = 102.7
+### R_incl =     Inclinaison (lue dans Obliquity.txt)
+R_incl = _AUTO_: DEFAULT = 23.441
+### solaire =    Constante solaire (lue dans SOLARANDVOLCANOES.txt)
+solaire = _AUTO_: DEFAULT = 1361.20
+### constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm, l'annÃ©e 1850 forcage CMIP6
+co2_ppm = _AUTO_: DEFAULT  = 2.8432e+02
+### co2_ppm_per =    taux 4xCO2 en ppm (uniqument pour calcul des diags)
+co2_ppm_per = _AUTO_: DEFAULT  =11.3728e+02
+### CH4_ppb =    taux CH4 en ppb, l'annÃ©e 1850 forcage CMIP6
+CH4_ppb = _AUTO_: DEFAULT = 8.0825e+02
+### N2O_ppb =    taux N2O en ppb, l'annÃ©e 1850 forcage CMIP6
+N2O_ppb = _AUTO_: DEFAULT = 2.7302e+02
+### CFC11_ppt = taux en ppt, l'annÃ©e 1850 forcage CFC11eq_CMIP6
+CFC11_ppt = _AUTO_: DEFAULT = 1.1726e+01
+### CFC12_ppt = taux en ppt, l'annÃ©e 1850 forcage CFC12eq_CMIP6
+CFC12_ppt = _AUTO_: DEFAULT = 1.6513e+01
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=preind
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+### Ozone chemistry coupling = online (y) or offline (n)
+chemistry_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+# ok_alw=y flag pour activer l effet LW des poussieres
+ok_alw=y
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
+#
+# Aerosols stratospheriques utilises par defaut 
+#
+flag_aerosol_strat=2
+# Diag VolMIP to get volcanic aerosols effects instead of tropospheric ones
+ok_volcan=n
+#
+# COSP
+#
+ok_cosp=_AUTO_
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_128x118_NPv3.2
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_128x118_NPv3.2	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_128x118_NPv3.2	(revision 5176)
@@ -0,0 +1,49 @@
+## $Id$
+## This parameter set up contains a zoom over Europe
+##
+## nombre de pas par jour (multiple de iperiod) ( day_step=2880 => dt=0.5min )      
+day_step=2880
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=1200.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=1200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=1200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=15
+## longitude en degres du centre du zoom                                 
+clon=8.5
+## latitude en degres du centre du zoom                                  
+clat=50.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=4.48751
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=3.40784
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.208914
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.243706
+##raideur du zoom en  X
+taux=10.
+##raideur du zoom en  Y
+tauy=10.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_AP
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_AP	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_AP	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=720 => dt=2min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=15
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv3.2
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv3.2	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv3.2	(revision 5176)
@@ -0,0 +1,1 @@
+link gcm.def_144x142_NPv5.70
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.70
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.70	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.70	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=720 => dt=2min )
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.80b
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.80b	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.80b	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=960
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.80bz0
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.80bz0	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv5.80bz0	(revision 5176)
@@ -0,0 +1,1 @@
+link gcm.def_144x142_NPv5.80b
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.10
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.10	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.10	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.9 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.11
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.11	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.11	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.9 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.12
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.12	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.12	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.12 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.13
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.13	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.13	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.12 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.14split
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.14split	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.14split	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.12 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.14ttop
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.14ttop	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.14ttop	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.12 3154 2017-03-01 20:15:12Z aclsce $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.15_S
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.15_S	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.15_S	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.15_S 3590 2018-02-19 09:50:04Z jgipsl $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.15_T
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.15_T	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.15_T	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.0.15_T 3590 2018-02-19 09:50:04Z jgipsl $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.7
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.7	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.7	(revision 5176)
@@ -0,0 +1,1 @@
+link gcm.def_144x142_NPv5.80b
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.8
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.8	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.8	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.8 3133 2017-02-15 14:13:49Z jgipsl $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=960
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.9
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.9	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.0.9	(revision 5176)
@@ -0,0 +1,56 @@
+## $Id: gcm.def_144x142_NPv6.0.9 3155 2017-03-02 09:13:22Z jgipsl $
+## nombre de pas par jour (multiple de iperiod) ( day_step=960 => dt=1.5min )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.1
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.1	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.1	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.1 3675 2018-03-22 08:27:36Z jgipsl $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.1.3
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.1.3	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_144x142_NPv6.1.3	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id: gcm.def_144x142_NPv6.1 3668 2018-03-20 14:55:33Z lfairhead $
+## nombre de pas par jour (multiple de iperiod) 
+## ( day_step=672 => dt=2.15min or 15mn/7, physique toutes les 15 mn )
+day_step=672
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=21600.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=10800.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=7
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=4
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.0.15_S
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.0.15_S	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.0.15_S	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod)
+## ( day_step=2688 => dt=32sec, iphysiq=28 => physique toutes les 15 mn )
+day_step=2688
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=900.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=900.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=28
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=6
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.0.15_T
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.0.15_T	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.0.15_T	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod)
+## ( day_step=2688 => dt=32sec, iphysiq=28 => physique toutes les 15 mn )
+day_step=2688
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=900.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=900.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=28
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=6
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.1
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.1	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.1	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod)
+## ( day_step=2688 => dt=32sec, iphysiq=28 => physique toutes les 15 mn )
+day_step=2688
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=900.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=900.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=28
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=6
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.1.3
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.1.3	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_512x360_NPv6.1.3	(revision 5176)
@@ -0,0 +1,57 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod)
+## ( day_step=2688 => dt=32sec, iphysiq=28 => physique toutes les 15 mn )
+day_step=2688
+## periode pour le pas Matsuno (en pas)
+iperiod=7
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=900.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=900.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno:y ou Matsuno-leapfrog:n) 
+purmats=n
+## avec ou sans physique
+## 0: pas de physique (e.g. en mode Shallow Water)
+## 1: avec physique (e.g. physique phylmd)
+## 2: avec rappel newtonien dans la dynamique                                         
+iflag_phys=1
+## avec ou sans fichiers de demarrage (start.nc, startphy.nc) ?
+## (sans fichiers de demarrage, initialisation des champs par iniacademic
+##  dans la dynamique)
+read_start=y
+## periode de la physique (en pas dynamiques, n'a de sens que si iflag_phys=1)                                       
+iphysiq=28
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##
+ngroup=6
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_96x95_AP
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_96x95_AP	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_96x95_AP	(revision 5176)
@@ -0,0 +1,47 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=480 => dt=3min )
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=10
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_96x95_NPv3.2
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_96x95_NPv3.2	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/gcm.def_96x95_NPv3.2	(revision 5176)
@@ -0,0 +1,47 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( day_step=480 => dt=3min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/guide.def
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/guide.def	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/guide.def	(revision 5176)
@@ -0,0 +1,16 @@
+# ok_guide=y : guidage active
+ok_guide=_AUTO_ : DEFFAULT = n
+#
+guide_u= y
+guide_v= y
+guide_T= n
+guide_P= n
+guide_Q= n
+
+ini_anal=n
+tau_min_u=0.0208333
+tau_max_u=0.125
+tau_min_v=0.0208333
+tau_max_v=0.125
+#tau_min_T=0.0208333
+#tau_max_T=10
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/iodef.xml
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/iodef.xml	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/iodef.xml	(revision 5176)
@@ -0,0 +1,43 @@
+<?xml version="1.0"?>
+<!-- =========================================================================================================== -->
+<!-- iodef.xml : Configuration file for production of output files using XIOS                                    -->
+<!--             This file contains the context XIOS.                                                            -->
+<!--             The model components context will be add automatically by the comp.driver                       -->
+<!-- =========================================================================================================== -->
+
+<simulation>
+
+  <!-- =========================================================================================================== -->
+  <!-- XIOS context                                                                                                -->
+  <!-- =========================================================================================================== -->
+  <context id="xios">
+
+    <variable_definition>
+         <variable_group id="server">
+            <variable id="using_server2" type="bool">false</variable>
+            <variable id="ratio_server2" type="int">50</variable>
+         </variable_group>
+
+        <variable_group id="buffer">
+            <variable id="optimal_buffer_size" type="string">performance</variable>
+            <variable id="buffer_size_factor" type="double">1.0</variable>
+            <variable id="min_buffer_size" type="int">10000000</variable>
+         </variable_group>
+
+        <variable_group id="parameters" >
+          <variable id="using_server" type="bool">false</variable>
+          <variable id="info_level" type="int">1</variable>
+          <variable id="print_file" type="bool">false</variable>
+          <variable id="using_oasis" type="bool">false</variable>
+          <variable id="oasis_codes_id" type="string" >LMDZ,oceanx</variable>
+        </variable_group>
+      <variable id="activate_non_distributed_transformation" type="bool">true</variable>
+      <variable id="recv_field_timeout" type="double">3000.0</variable>
+    </variable_definition>
+
+  </context>
+
+  <!-- =========================================================================================================== -->
+  <!-- COMPONENT CONTEXT : the model components context will be add automatically by the comp.driver               -->
+  
+</simulation>
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/orchidee.def_CWRR
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/orchidee.def_CWRR	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/orchidee.def_CWRR	(revision 5176)
@@ -0,0 +1,227 @@
+#
+#**************************************************************************
+#                    Parameter file list for ORCHIDEE
+# See all optional parameters in modipsl/modeles/ORCHIDEE/orchidee.default
+#**************************************************************************
+
+# Input and output
+#**************************************************************************
+# Restart the time from the GCM. 
+# default = n
+SECHIBA_reset_time = y
+
+# Name of restart to read for initial conditions
+# default = NONE
+SECHIBA_restart_in = _AUTOBLOCKER_
+
+# Name of restart to read for initial conditions of STOMATE
+# default = NONE
+STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
+
+# Use XIOS for writing diagnostics file
+# default = y
+XIOS_ORCHIDEE_OK = y
+
+# Writefrequency in seconds in sechiba_history.nc
+# default = 0
+WRITE_STEP = 0
+
+# Print level for text output in out_orchidee_*
+# PRINTLEV = 1 : some output in initialization phase
+# PRINTLEV = 2 : more output in initialization phase and printing of new date
+# PRINTLEV = 3, 4,.. : more output also at each timestep
+PRINTLEV=1
+
+# Hydrology parameters
+#**************************************************************************
+# Activate the multi-layer diffusion scheme adapted from CWRR
+# default = y
+HYDROL_CWRR = y
+
+# Activate river routing
+# default = y
+RIVER_ROUTING = y
+
+# Activate creation of river_desc.nc file
+# RIVER_DESC will be activated only the first execution in the simulation. 
+RIVER_DESC = _AUTO_
+
+# SOILTYPE_CLASSIF :  Type of classification used for the map of soil types (default zobler)
+SOILTYPE_CLASSIF = zobler 
+SOILALB_FILE     = soils_param.nc
+SOILCLASS_FILE   = soils_param.nc
+
+# DO_RSOIL : Reduce soil evaporation with a soil resistance (default n)
+DO_RSOIL = n
+
+# To make AVAN and NVAN constant with depth (default CWRR_AKS_A0=0, CWRR_AKS_POWER=0, CWRR_NKS_A0=0, CWRR_NKS_POWER=0 )
+CWRR_AKS_A0 = 0.
+CWRR_AKS_POWER = 0.
+CWRR_NKS_A0 = 0.
+CWRR_NKS_POWER = 0.
+
+#**************************************************************************
+# Activate Stomate component
+STOMATE_OK_STOMATE = _AUTOBLOCKER_ 
+
+# Activate calculations of CO2 according to Farqhuar and Ball
+# default = y
+STOMATE_OK_CO2 = y
+
+# CDRAG_from_GCM: Use cdrag coefficient from gcm (default=y if coupled to LMDZ)
+CDRAG_from_GCM = y
+
+# Interception reservoir coefficient.
+# default = 0.1
+SECHIBA_QSINT = 0.02
+
+# Use 15 PFTs. Note that PFTmap.nc must contains 15PFTs.
+# PFT=10, 14 and 15 share the same parametrization except for VCMAX and LAI_MAX specified below.  
+NVM=15
+PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10
+PFT_NAME__10='temperate C3           grass      '
+PFT_NAME__14='tropical  C3           grass      '
+PFT_NAME__15='boreal    C3           grass      '
+
+# STRESS_GS, STRESS_GM, STRESS_VCMAX : Stress on GS, GM and VCMAX
+# Default STRESS_GS=1, STRESS_GM=1, STRESS_VCMAX=1 for all PFTs
+STRESS_GS=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
+STRESS_GM=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
+STRESS_VCMAX=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
+
+# Optimized parameters for albedo (default values)
+ALB_LEAF_NIR = 0.,0.23,0.18,0.18,0.20,0.24,0.15,0.26,0.20,0.24,0.27,0.28,0.26,0.24,0.24
+ALB_LEAF_VIS = 0.,0.04,0.04,0.04,0.04,0.03,0.03,0.03,0.03,0.06,0.06,0.06,0.06,0.06,0.06
+SNOWA_AGED_NIR = 0.50,0,0,0.10,0.37,0.08,0.16,0.17,0.27,0.44,0.44,0.44,0.44,0.44,0.44
+SNOWA_DEC_NIR = 0.13,0,0,0.10,0.10,0.16,0.04,0.07,0.08,0.12,0.12,0.12,0.12,0.12,0.12
+SNOWA_AGED_VIS = 0.74,0,0,0.08,0.24,0.07,0.18,0.18,0.33,0.57,0.57,0.57,0.57,0.57,0.57
+SNOWA_DEC_VIS = 0.21,0,0,0.14,0.08,0.17,0.05,0.06,0.09,0.15,0.15,0.15,0.15,0.15,0.15
+
+# Optimized parameters for photosynthetic capacity 
+# Default values except for PFT=15
+VCMAX25__02 = 45.0
+VCMAX25__03 = 45.0
+VCMAX25__04 = 35.0
+VCMAX25__05 = 40.0
+VCMAX25__06 = 50.0
+VCMAX25__07 = 45.0
+VCMAX25__08 = 35.0
+VCMAX25__09 = 35.0
+VCMAX25__10 = 50.0
+VCMAX25__11 = 50.0
+VCMAX25__12 = 60.0
+VCMAX25__13 = 60.0
+VCMAX25__14 = 50.0
+VCMAX25__15 = 40.0
+
+# Optimized parameters for LAI
+# Default values except for PFT=15
+LAI_MAX__02 = 7.0
+LAI_MAX__03 = 5.0
+LAI_MAX__04 = 5.0
+LAI_MAX__05 = 4.0
+LAI_MAX__06 = 5.0
+LAI_MAX__07 = 3.5
+LAI_MAX__08 = 4.0
+LAI_MAX__09 = 3.0
+LAI_MAX__10 = 2.5
+LAI_MAX__11 = 2.0
+LAI_MAX__12 = 5.0
+LAI_MAX__13 = 5.0
+LAI_MAX__14 = 2.5
+LAI_MAX__15 = 2.0
+
+# Activate downregulation for CO2
+DOWNREGULATION_CO2=y
+DOWNREGULATION_CO2_BASELEVEL=380.
+
+# Activate harvest of wood
+DO_WOOD_HARVEST=_AUTO_ : DEFAULT=y
+
+# Growth respiration (default values except for PFT=14 and PFT=15)
+FRAC_GROWTHRESP__02 = 0.35
+FRAC_GROWTHRESP__03 = 0.35
+FRAC_GROWTHRESP__04 = 0.28
+FRAC_GROWTHRESP__05 = 0.28
+FRAC_GROWTHRESP__06 = 0.28
+FRAC_GROWTHRESP__07 = 0.35
+FRAC_GROWTHRESP__08 = 0.35
+FRAC_GROWTHRESP__09 = 0.35
+FRAC_GROWTHRESP__10 = 0.28
+FRAC_GROWTHRESP__11 = 0.28
+FRAC_GROWTHRESP__12 = 0.28
+FRAC_GROWTHRESP__13 = 0.28
+FRAC_GROWTHRESP__14 = 0.35
+FRAC_GROWTHRESP__15 = 0.35
+
+# Maintenance respiration slope C (default values except for PFT=14 and PFT=15)
+MAINT_RESP_SLOPE_C__02 = 0.12
+MAINT_RESP_SLOPE_C__03 = 0.12
+MAINT_RESP_SLOPE_C__04 = 0.16
+MAINT_RESP_SLOPE_C__05 = 0.16
+MAINT_RESP_SLOPE_C__06 = 0.16
+MAINT_RESP_SLOPE_C__07 = 0.25
+MAINT_RESP_SLOPE_C__08 = 0.25
+MAINT_RESP_SLOPE_C__09 = 0.25
+MAINT_RESP_SLOPE_C__10 = 0.16
+MAINT_RESP_SLOPE_C__11 = 0.12
+MAINT_RESP_SLOPE_C__12 = 0.16
+MAINT_RESP_SLOPE_C__13 = 0.12
+MAINT_RESP_SLOPE_C__14 = 0.12
+MAINT_RESP_SLOPE_C__15 = 0.25
+
+# Soil turnover (default CARBON_TAU=7, CARBON_TAU_IPASSOVE=300)
+CARBON_TAU_ISLOW = 7
+CARBON_TAU_IPASSIVE = 300
+
+# Take carbon from atmosphere if carbohydrate reserve too small, PFT dependent
+# Set to y for all pft except C4 grass (pft=11) and tropical C3 grass (pft=14)
+ALWAYS_INIT =  y, y, y, y, y, y, y, y, y, y, n, y, y, n, y
+
+# Do not use default fire module
+# Default FIRE_DISABLE=y
+FIRE_DISABLE = y
+
+# Parameters related to vegetation map
+#**************************************************************************
+# Update vegetation frequency
+# The maximum vegetation fractions will be update at this period
+# default = 1Y
+VEGET_UPDATE = _AUTO_
+
+# Read lai map (default n)
+LAI_MAP = _AUTO_ : DEFAULT = n
+
+# Parameters related to surface and thermal physical properties
+#************************************************************************
+# Read bare soil albedo from file with background MODIS data
+# Default ALB_BG_MODIS=y
+ALB_BG_MODIS = y
+ALB_BG_FILE  = alb_bg.nc
+
+# ROUGH_DYN : Account for a dynamic roughness height (activation of Su et al. parametrization) (default y)
+ROUGH_DYN=y
+
+# OK_FREEZE :  Activate the complet soil freezing scheme (default y)
+OK_FREEZE=y
+
+# DEPTH_MAX_T (m) :  Maximum depth of the soil thermodynamics (default 90)
+DEPTH_MAX_T=90
+
+# OK_EXPLICITSNOW :  Activate explict snow scheme (default y)
+OK_EXPLICITSNOW=y
+ 
+# READ_REFTEMP :  Initialize soil temperature using climatological temperature (default y if OK_FREEZE=y)
+READ_REFTEMP=y
+
+# Parameters related to chemistry bvoc 
+#************************************************************************
+# CHEMISTRY_OK_BVOC :  Activate chemistry
+CHEMISTRY_BVOC =  n
+
+# CO2 FOR BVOC - WILKINSON :  CO2 inhibition effect for isoprene based on Wilkinson approach?
+CO2_FOR_BVOC_WILKINSON=n
+
+# CO2 FOR BVOC - POSSELL :  CO2 inhibition effect for isoprene based on Possell approach?
+CO2_FOR_BVOC_POSSELL=n
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/orchidee.def_Choi
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/orchidee.def_Choi	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/orchidee.def_Choi	(revision 5176)
@@ -0,0 +1,134 @@
+#
+#**************************************************************************
+#                    Parameter file list for ORCHIDEE
+#**************************************************************************
+
+# Input and output
+#**************************************************************************
+# Restart the time from the GCM. 
+# default = n
+SECHIBA_reset_time = y
+
+# Name of restart to read for initial conditions
+# default = NONE
+SECHIBA_restart_in = _AUTOBLOCKER_
+
+# Name of restart to read for initial conditions of STOMATE
+# default = NONE
+STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK = y
+
+# Writefrequency in seconds in sechiba_history.nc
+# default = 86400.0
+WRITE_STEP = 0
+
+# Hydrology parameters
+#**************************************************************************
+# Activate the multi-layer diffusion scheme adapted from CWRR
+# by default the Choisnel hydrology is used.
+# default = n
+HYDROL_CWRR = n 
+
+# Total depth of soil reservoir
+# default = 2./4. depending on HYDROL_CWRR
+HYDROL_SOIL_DEPTH = 4.
+
+# Root profile
+HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+
+# Activate river routing
+# default = n
+RIVER_ROUTING = y
+
+#**************************************************************************
+# Activate Stomate component
+# default = n
+STOMATE_OK_STOMATE = _AUTOBLOCKER_ 
+
+# Activate calculations of CO2 according to Farqhuar and Ball
+# default = n
+STOMATE_OK_CO2 = y
+
+# Use cdrag coefficient from gcm
+CDRAG_from_GCM = y
+
+# Interception reservoir coefficient.
+# default = 0.1
+SECHIBA_QSINT = 0.02
+
+# Use 15 PFTs. Note that PFTmap.nc must contains 15PFTs.
+# PFT=10, 14 and 15 share the same parametrization.  
+NVM=15
+PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10
+PFT_NAME__10='temperate C3           grass      '
+PFT_NAME__14='tropical  C3           grass      '
+PFT_NAME__15='boreal    C3           grass      '
+
+# Set NVM and PFT_TO_MTC as follow to run with PFTmap files containing 13 pfts
+# Do this for example to run with the CMIP5 vegetation files
+#NVM=13
+#PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13
+
+# Do not use default fire module
+FIRE_DISABLE = y
+
+# Parmeters related to vegetation map
+#**************************************************************************
+# Update vegetation frequency
+# The veget datas will be update at this period
+# default = 1Y
+VEGET_UPDATE = _AUTO_
+
+# Read lai map (default n)
+LAI_MAP = _AUTO_ : DEFAULT = n
+
+# Create river description file
+RIVER_DESC = _AUTO_
+RIVER_DESC_FILE =  river_desc.nc
+
+# Parameter related to chemistry bvoc 
+#************************************************************************
+# CHEMISTRY_OK_BVOC ([FLAG]) :  Activate chemistry    {OK_SECHIBA}
+# default =  n 
+CHEMISTRY_BVOC =  n
+
+# CO2 FOR BVOC - WILKINSON ([FLAG]) :  CO2 inhibition effect for isoprene based on Wilkinson approach?    {CHEMISTRY_OK_BVOC }
+CO2_FOR_BVOC_WILKINSON=n
+
+# CO2 FOR BVOC - POSSELL ([FLAG]) :  CO2 inhibition effect for isoprene based on Possell approach?    {CHEMISTRY_OK_BVOC }
+CO2_FOR_BVOC_POSSELL=n
+
+
+# Parameters below were previous default values
+# The new values have not been tested with Choisnel. 
+#************************************************************************
+OK_EXPLICITSNOW=n
+DO_WOOD_HARVEST=n
+ROUGH_DYN=n
+VCMAX25=-9999., 50.0, 65.0, 45.0, 45.0, 55.0, 45.0, 45.0, 35.0, 70.0, 70.0, 70.0, 70.0, 70.0, 70.0
+STRESS_GS=0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0. ,0., 0.
+STRESS_GM=0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0., 0. ,0., 0.
+SNOWA_AGED_VIS=0.5, 0., 0., 0.15, 0.14, 0.14, 0.15, 0.14, 0.22, 0.35, 0.35, 0.35, 0.35, 0.35, 0.35
+SNOWA_AGED_NIR=0.35, 0., 0., 0.14, 0.14, 0.14, 0.14, 0.14, 0.14, 0.18, 0.18, 0.18, 0.18, 0.18, 0.18
+SNOWA_DEC_VIS= 0.45, 0., 0., 0.1, 0.06, 0.11, 0.10, 0.11, 0.18, 0.60, 0.60, 0.60, 0.60, 0.60, 0.60
+SNOWA_DEC_NIR= 0.45, 0., 0., 0.06, 0.06, 0.11, 0.06, 0.11, 0.11, 0.52 ,0.52, 0.52, 0.52, 0.52 ,0.52
+ALB_LEAF_VIS=.0, .0397, .0474, .0386, .0484, .0411, .041, .0541, .0435, .0524, .0508, .0509, .0606, .0524, .0524
+ALB_LEAF_NIR=.0, .227, .214, .193, .208, .244, .177, .218, .213, .252, .265, .272, .244, .252, .252
+FRAC_GROWTHRESP = -9999., .28, .28, .28, .28, .28, .28, .28, .28, .28, .28, .28, .28, .28, .28
+MAINT_RESP_SLOPE_C=-9999., .20, .20, .16, .16, .16, .16, .16, .16, .16, .12, .16, .12, .16, .16
+LAI_MAX=-9999., 7., 7., 5., 5., 5., 4.5, 4.5, 3.0, 2.5, 2.5, 5.,5., 2.5, 2.5
+ALWAYS_INIT=n, n, n, n, n, n, n, n, n, n, n, n, n, n, n
+ALB_BG_MODIS=n
+DOWNREGULATION_CO2=n
+DOWNREGULATION_CO2_BASELEVEL = 280.
+CARBON_TAU_ISLOW = 5.48
+CARBON_TAU_IPASSIVE = 241.
+OK_FREEZE = n
+CWRR_NKS_N0 = 0.95
+CWRR_NKS_POWER = 0.34
+CWRR_AKS_A0 = 0.00012
+CWRR_AKS_POWER = 0.53
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_AP
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_AP	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_AP	(revision 5176)
@@ -0,0 +1,95 @@
+## $Id$
+#
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+#
+
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .999
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp) 
+cld_lc_lsc = 4.16e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp) 
+cld_lc_con = 4.16e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 1800.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 1800.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 0.5
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 0.5
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+
+### nsplit_phys (D=1) 
+nsplit_phys=1
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv3.2
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv3.2	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv3.2	(revision 5176)
@@ -0,0 +1,131 @@
+##############################################################################
+# PARAMETRES ET CLES DE CONFIGURATION LMDZ 
+# Cette parie sera bientot extrait dans un fichier config.def
+##############################################################################
+# D: Valeur par default
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.7
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=0
+## NSW need to be 6 when iflag_rrtm=1
+NSW=2   
+#
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=6.e-4
+cld_lc_con=6.e-4
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=1800.
+cld_tau_con=1800.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.35
+ffallv_con=1.35
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=1e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=2
+ratqsbas=0.002
+ratqshaut=0.25
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+#
+rei_min=20.
+rei_max=61.29
+#
+t_glace_min=258.
+t_glace_max=273.13
+#
+# Flags Convection 
+#*****************
+#flag  pour la convection (D:2, 1:LMD, 2:Tiedtke, 3:KE nouvelle physique, 30:KE IPCC)
+iflag_con=3
+#niveau de sorties des diagnos sur la conservation energie
+if_ebil=0
+#efficacite de precepitation maxim (D:.993)
+epmax=0.997
+#ajustement convectif sec au debut de la convection (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#fermeture convective (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#loi de melange a l entrainement  (D:1, 0:AR4=PDF plate, 1=PDF)
+iflag_mix=1
+#poids des PDFs plate et en cloche (D: 1 0)
+qqa1=1.
+qqa2=0.
+# Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=17
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=10
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+# Flags wakes
+#************
+#activation ou non des wakes (D:0, 0:AR4, 1:nouvelle physique) 
+iflag_wake=1
+alp_offset=0.
+
+nsplit_phys=1
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.70
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.70	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.70	(revision 5176)
@@ -0,0 +1,247 @@
+#
+# $Id: physiq.def_NPv5.70 3034 2016-12-01 15:55:31Z jgipsl $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.6
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37500.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=2
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.80b
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.80b	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.80b	(revision 5176)
@@ -0,0 +1,249 @@
+#
+# $Id: physiq.def_NPv5.80a 2925 2016-07-22 13:33:42Z lfairhead $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.6
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=43700.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.80bz0
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.80bz0	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv5.80bz0	(revision 5176)
@@ -0,0 +1,252 @@
+#
+# $Id: physiq.def_NPv5.80a 2925 2016-07-22 13:33:42Z lfairhead $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=1
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=2.5
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.2
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=43700.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.10
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.10	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.10	(revision 5176)
@@ -0,0 +1,282 @@
+#
+# $Id: physiq.def_NPv6.0.10 2846 2017-04-11 14:05:05Z musat $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+#parameter for Z0
+f_cdrag_oce=0.9
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+#
+gwd_front_ruwmax = 4.00
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=1.0
+sso_gklift=0.1
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00011
+cld_lc_con=0.00011
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.
+ffallv_con=1.
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=4.5e-5
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.997
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+t_top_max=275.
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.08
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d un zmax continu pour les thermiques
+## reactivation d une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+#
+flag_wk_check_trgl=y
+#
+cv_flag_feed=2
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=2
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+# nouvel epluchage de C.Rio
+iflag_mix_adiab=0
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+#wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+#
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+nbapp_cv=48
+
+# Prevent some crashes
+# Filter out bad wakes
+flag_wk_check_trgl=y
+# Check whether parcel level temperature and specific humidity
+# are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+# Correction bug for thermodynamical constants passed to rrtm
+ok_bad_ecmwf_thermo=n
+# Check for energy conservation
+fl_cor_ebil=1
+
+# save 20% CPU 
+ok_optim_yield=y
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.11
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.11	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.11	(revision 5176)
@@ -0,0 +1,489 @@
+#
+# $Id: physiq.def_NPv6.0.11 3323 2017-07-24 13:28:06Z jgipsl $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1.
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1.
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1.
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=0
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=1.
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=2.5E-3
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=2.0E-3
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0.
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1.
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0.
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax = 3.00
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.000075
+cld_lc_con=0.000075
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=1.e-4
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=1
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=y
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+
+          # ?????
+facttemps=0.
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          #rayons effectifs pour les nuages eau liq (tailles des gouttes
+          # d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=1.5E-3
+oicemax=1.5E-3
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.9985
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+          #
+t_top_max=255.
+#
+### Convection
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40.
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=1
+wbmax=6.
+
+          # Divers tests
+ok_convstop=.False.
+tau_stop=15000.
+ok_intermittent=.False.
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40.
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150.0
+ptcrit=500.0
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=y
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=1.2e7
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0.
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y 
+
+fl_cor_ebil=1
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.12
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.12	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.12	(revision 5176)
@@ -0,0 +1,502 @@
+#
+# $Id: physiq.def_NPv6.0.12 3312 2017-07-12 09:43:27Z aclsce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1.
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1.
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1.
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=0
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=1.
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=2.5E-3
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=2.0E-3
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0.
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1.
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0.
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.50
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax = 3.00
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00012
+cld_lc_con=0.00012
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=1.e-4
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=1
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=y
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+
+          # ?????
+facttemps=0.
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          #rayons effectifs pour les nuages eau liq (tailles des gouttes
+          # d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=1.5E-3
+oicemax=1.5E-3
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.9985
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+          #
+t_top_max=255.
+#
+### Convection
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40.
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=1
+wbmax=6.
+
+          # Divers tests
+ok_convstop=.False.
+tau_stop=15000.
+ok_intermittent=.False.
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40.
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150.0
+ptcrit=500.0
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=y
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=1.2e7
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0.
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y 
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.13
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.13	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.13	(revision 5176)
@@ -0,0 +1,517 @@
+#
+# $Id: physiq.def_NPv6.0.13 3046 2017-10-26 13:56:48Z fairhead $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1.
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1.
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1.
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=1
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=2.5E-3
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=2.0E-3
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0.
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1.
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0.
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.70
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.60
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax = 3.00
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350.
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.000106
+cld_lc_con=0.000106
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=1.e-4
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=3
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+
+          # ?????
+facttemps=0.
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          #rayons effectifs pour les nuages eau liq (tailles des gouttes
+          # d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=1.5E-3
+oicemax=1.5E-3
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.998
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+          #
+t_top_max=255.
+#
+### Convection
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40.
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=20
+wbmax=3.
+
+          # Divers tests
+ok_convstop=.False.
+tau_stop=15000.
+ok_intermittent=.False.
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40.
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150.0
+ptcrit=500.0
+
+          # Prevent some crashes
+          # Filter out bad wakes
+iflag_wk_check_trgl=2
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=1.2e7
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0.
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1.e-9
+wdens_ref_l=8.e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y 
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
+####################################################################
+#  Modelisation des bosquets
+####################################################################
+ifl_pbltree=1
+Cd_frein=0.016
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.14split
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.14split	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.14split	(revision 5176)
@@ -0,0 +1,525 @@
+#
+# $Id: physiq.def_NPv6.0.12 3312 2017-07-12 09:43:27Z aclsce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=1
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0002
+cld_lc_con=0.0002
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=3
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.9997
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=30
+wbmax=3
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.1
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.14ttop
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.14ttop	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.14ttop	(revision 5176)
@@ -0,0 +1,526 @@
+#
+# $Id: physiq.def_NPv6.0.12 3312 2017-07-12 09:43:27Z aclsce $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=1
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.0025
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.002
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.6
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.000106
+cld_lc_con=0.000106
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=3
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=20000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.998
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=20
+wbmax=3
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=255
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.15_S
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.15_S	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.15_S	(revision 5176)
@@ -0,0 +1,530 @@
+#
+# $Id: physiq.def_NPv6.0.15_S 3592 2018-02-19 16:44:48Z lfairhead $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.0004
+cld_lc_con=0.0004
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.15_T
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.15_T	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.15_T	(revision 5176)
@@ -0,0 +1,530 @@
+#
+# $Id: physiq.def_NPv6.0.15_T 3593 2018-02-20 10:07:02Z jgipsl $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=1
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.0025
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.002
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=0
+alphatkeoro=1
+smallscales_tkeoro=n
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.6
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.000106
+cld_lc_con=0.000106
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.6
+ffallv_con=0.6
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=3
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2
+iflag_t_glace=2
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=20000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.998
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.01
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=20
+wbmax=3
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+tlcrit=-40
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=0
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=255
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.7
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.7	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.7	(revision 5176)
@@ -0,0 +1,256 @@
+#
+# $Id: physiq.def_NPv5.80a 2925 2016-07-22 13:33:42Z lfairhead $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+# parameter for z0
+f_cdrag_oce=1
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+gwd_front_ruwmax=4.00
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00028
+cld_lc_con=0.00028
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.5
+ffallv_con=0.5
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=233.13
+t_glace_max=273.13
+exposant_glace=1.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+wdens_ref=8.E-12
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+### Les parametres suivants viennent du config.def
+# constante solaire lue dans un fichier par defaut
+ok_suntime_rrtm=y
+# Aerosols stratospheriques utilises par defaut
+flag_aerosol_strat=2
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.8
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.8	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.8	(revision 5176)
@@ -0,0 +1,264 @@
+#
+# $Id: physiq.def_NPv6.0.8 3131 2017-02-14 15:11:12Z jgipsl $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+#parameter for Z0
+f_cdrag_oce=1.
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+#
+gwd_front_ruwmax = 4.00
+
+sso_gkdrag=0.2
+sso_gfrcri=0.70
+sso_gkwake=0.40
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00015
+cld_lc_con=0.00015
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.
+ffallv_con=1.
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.997
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+###t_top_max=275.
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+#
+flag_wk_check_trgl=y
+#
+cv_flag_feed=2
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+#wdens_ref=8.E-12
+wdens_ref_o=8.e-12
+wdens_ref_l=8.e-12
+#
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.9
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.9	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.0.9	(revision 5176)
@@ -0,0 +1,277 @@
+#
+# $Id: physiq.def_NPv6.0.9 3155 2017-03-02 09:13:22Z jgipsl $
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+iflag_albedo=1
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+
+#parameter for Z0
+f_cdrag_oce=1.
+iflag_z0_oce=1
+f_z0qh_oce=1.55
+min_wind_speed=0.1
+
+f_ri_cd_min=0.1
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+### Random gravity waves
+#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
+ok_gwd_rando=y
+# Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.23
+#Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.60
+#
+gwd_front_ruwmax = 4.00
+
+sso_gfrcri=0.70
+
+sso_gkdrag=0.6
+sso_gkwake=1.0
+sso_gklift=0.1
+
+
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+NSW=6
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00015
+cld_lc_con=0.00015
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=900.
+cld_tau_con=900.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.
+ffallv_con=1.
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=2e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=4
+ratqsp0=37000.
+ratqsdp=20000.
+ratqsbas=0.002
+ratqshaut=0.4
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+# Seuils oliqmax, oicemax
+oliqmax=1.5E-3
+oicemax=1.5E-3
+#Rayons min et max effectifs des particules des nuages
+rei_min=16.
+rei_max=61.29
+#
+# Flags Convection 
+#*****************
+#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+#output level of energy conservation diagnostics
+if_ebil=0
+#maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.997
+#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1.
+qqa2=0.
+#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1.0
+#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+#
+###t_top_max=275.
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=18
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=8
+fact_thermals_ed_dz=0.1
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=11
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+## temperature dependency of qsat for iterative procedure
+## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
+iflag_fisrtilp_qsat=4 
+## Reactivation du calcul d'un zmax continu pour les thermiques
+## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=1
+#
+# Flags wakes
+#************
+#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+#Constant value to be added to Alp (D: 0.)
+alp_offset=0.
+
+### nrlmd le 10/04/2012: Declenchement ###
+#Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+#Surface critique au LCL
+s_trig=1.2e7
+#Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+#Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+# Pour la stabilisation
+random_notrig_max=0.99
+ok_adjwk=y
+tmax_fonte_cv=278.15
+#
+flag_wk_check_trgl=y
+#
+cv_flag_feed=2
+
+### nrlmd le 10/04/2012: Fermeture ###
+#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
+iflag_clos_bl=1
+### fin nrlmd le 10/04/2012
+
+## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
+## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=2.
+iflag_t_glace=2
+iflag_ice_thermo=1
+
+#
+## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
+## associated with subrgrid scaleamotions and treated as an additional heat source.
+## Controled by a key, iflag_ener_conserv (D=-1):
+## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
+## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
+iflag_ener_conserv=1
+
+#Activation of corrections for water conservation (D: n). 
+##The default is n for compatibility with earlier versions.
+##generally it should be y.
+ok_conserv_q=y 
+
+iflag_cloudth_vert=3
+
+#
+lmixmin=10.
+#pbl_lmixmin_alpha=0.05
+
+#Bergeron
+iflag_bergeron=1
+
+
+### Convection
+#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
+dpbase=-40.
+#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
+pbcrit=150.0
+#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
+ptcrit=500.0
+#reference fractional area of precipitating downdraughts, def = original: 0.01
+sigdz=0.01
+#unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+#relaxation time of cloud base mass flux, def = original: 8000
+tau=8000.
+#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
+flag_wb=1
+#parameter used in the computation of wb, def = 6.
+wbmax=6.
+#
+ok_convstop=.False.
+#
+tau_stop=15000.
+#
+ok_intermittent=.False.
+#shedding coefficient (used when iflag_mix_adiab=1)
+coef_peel=0.25
+#
+### Clouds
+#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
+flag_epKEorig=1
+#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.00025
+#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
+tlcrit=-40.
+
+### Wakes
+#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
+stark=0.33
+#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
+alpk=0.25
+#wake density = number of wake centers per m2, def: 8.E-12
+#wdens_ref=8.E-12
+wdens_ref_o=8.e-12
+wdens_ref_l=8.e-12
+#
+#multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4.
+#
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+inertie_sno=350.
+
+# Frequency of call to convection 
+nbapp_cv=48
+
+# Prevent some crashes
+# Filter out bad wakes
+flag_wk_check_trgl=y
+# Check whether parcel level temperature and specific humidity
+# are reasonable and demand that LCL be high enough
+cv_flag_feed=2
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.1
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.1	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.1	(revision 5176)
@@ -0,0 +1,531 @@
+#
+# $Id: physiq.def_NPv6.1 4020 2018-09-05 17:28:38Z jgipsl $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+
+
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00065
+cld_lc_con=0.00065
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=_AUTO_: DEFAULT = n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
+cdnc_min=10.
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.1.3
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.1.3	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/physiq.def_NPv6.1.3	(revision 5176)
@@ -0,0 +1,532 @@
+#
+# $Id: physiq.def_NPv6.1 3668 2018-03-20 14:55:33Z lfairhead $
+#
+
+##############################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################
+# D: Valeur par default
+#
+
+###########################################################
+# divers. Devrait aller dans config.def ?
+###########################################################
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+
+###########################################################
+# Parametres couche limite de surface
+###########################################################
+
+          #  ...
+f_cdrag_stable=1
+
+          # Facteur sur les coefficients de trainee terrestres
+f_cdrag_ter=1
+
+          # Vitesse minimum dans les calculs de trainee Cd ( || V || + Vmin )
+min_wind_speed=0.1
+
+          #  Modelisation des bosquets
+ifl_pbltree=1
+Cd_frein=0.016
+
+###########################################################
+# parameter des flux air-mer
+###########################################################
+
+          # Facteur sur les flux sensibles et latent
+          # Introduit pour reduire l evaporation quand on avait z0h=z0m
+          # CONSEILLE : 1
+f_cdrag_oce=1
+
+          # Flag controlant le calcul des z0
+iflag_z0_oce=1
+
+          # Rapport entre les Z0 latent et sensible
+f_z0qh_oce=1.55
+
+          # Activation des rafales : Oui 1 ou non 0
+iflag_gusts=2
+
+          # facteur pour les rafales des thermiques (bounary layer)
+f_gust_bl=0.845
+
+          # facteur pour les poches (wake)
+f_gust_wk=0.2
+
+          # facteur sur qsat pour tenir compte de la salinite
+f_qsat_oce=0.98
+
+          #cdmmax : valeur max de Cd moment. Sur ocean seulement
+cdmmax=0.2
+
+          #cdhmax : valeur max de Cd evap/sensible. Sur ocean seulement
+cdhmax=0.2
+
+####################################################################
+# Couche limite turbulente
+####################################################################
+
+          # Nouvelle version de Mellor et Yamada
+new_yamada4=y
+
+          # Choix du schema numerique pour new_yamada4=y
+          #  1 schema de MAR. Bien pour CL stables mais detruit les stratocu
+          #  5 schema de MAR modifie. Precaunise.
+yamada4_num=5
+
+          # Flag de controle de la couche limite stable
+iflag_corr_sta=4
+
+          # min sur les fonction de stabilite a la surface
+f_ri_cd_min=0.01
+
+          # max du Ric pour Kz. Decouplage plus grand pour Ric plus grand.
+yamada4_ric=0.18
+
+          # Longueur de melange minimum pour Kz
+lmixmin=0
+
+          #shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=12
+
+          # Seuils pour la diffusion turbulente
+ksta_ter=1e-07
+ksta=1e-10
+
+          #ok_kzmin : calcul Kzmin dans la CL de surface (D: y)
+ok_kzmin=n
+
+          # Creation de TKE par orographie sous-maille
+addtkeoro=2
+alphatkeoro=1
+smallscales_tkeoro=y
+
+
+####################################################################
+# Ondes de gravite / Orographie sous maille
+####################################################################
+
+          #  Orodr  ou  non   pour l orographie
+ok_orodr=y
+
+          #  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+
+          #Rugoro : inclusion de l orographie sous maille dans le Cd de surface
+          # Obsolete avec l activation des ondes de gravite
+f_rugoro=0
+
+          # Parametres controlant l effet de l orographie sous maille
+sso_gfrcri=0.7
+sso_gkdrag=0.6
+sso_gkwake=0.4
+sso_gklift=0.1
+
+          # Random gravity waves
+          #Activitate the stochastic parameterization of convective GWs
+          # (should be equal to ok_strato)
+ok_gwd_rando=y
+
+          # Scale the momentum fluxes due to convective GWs
+gwd_rando_ruwmax=0.5
+
+          #Scale the saturated momentum flux of  convective GWs 
+gwd_rando_sat=0.6
+
+          # Important pour controler la periode de la QBO
+gwd_front_ruwmax=3
+
+
+###############################################################
+# Rayonnement
+###############################################################
+          # activation du nouveau code de rayonnement RRTM
+          # 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=1
+
+          # Nombre de bandes pour le SW. Mettre 2 si iflag_rrtm=0
+NSW=6
+
+    # Albedo et inertie des calottes
+alb_vis_sno_lic=0.96
+alb_nir_sno_lic=0.68
+    # Controle de l'inertie des glaciers et banquises
+    # inertie_sno : pour la neige (y compris sur les points "ter"
+    #      quand orchidee n'est pas actif utilisÃ©)
+    # inertie_lic/sic : pour les "land ice" et "sea ice"
+inertie_sno=350
+    # iflag_sic=1 pour forcer Ã  garder l'inertie des "sea ice"
+    # a inertie_sic meme si la surface est couverte de neige
+iflag_sic=1
+inertie_lic=2000
+inertie_sic=2000
+    # tau_gl = constante de rappel de la temperature a la surface de la glace (en nombre de jours)
+    # Utilise celon le forcage : tau_gl=2 pour Amip et tau_gl=1 pour Hadisst2
+tau_gl= _AUTO_ : DEFAULT = 5.
+          # ???
+iflag_albedo=1
+
+          # Frequence appel rayonnement. Nombre appels par jour
+nbapp_cv=48
+
+          # Pour pouvoir revenir a un bug purement informatique de duplication
+          # des constantes thermodynamiques entre LMDZ et RRTM
+          # n : FORTEMENT CONSEILLE
+ok_bad_ecmwf_thermo=n
+
+###############################################################
+# Parametres nuages
+###############################################################
+
+          #seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=0.00065
+cld_lc_con=0.00065
+
+          #constante de temps pour eleminer eau lsc et convective
+          # (D: 3600. 3600.)
+cld_tau_lsc=900
+cld_tau_con=900
+
+          #facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=0.8
+ffallv_con=0.8
+
+          # coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+          # regle a 3.e-5 sur des cas de cumulus en 1D
+coef_eva=0.0001
+
+          # flag pour la reevaporation de la pluie
+          # 0: rien
+          # 1: a l ancienne
+          # 2: prend en compte la surface nuageuse max au dessus pour calculer
+          #    le max de reevaporation, comme ecart a la saturation. CONSEILLE
+iflag_evap_prec=2
+
+          # Modification de la plage de temperature pour la phase mixte
+          # liquide/glace des nuages
+          # Controle par les t_glace_min/max, exposant_glace,
+          # iflag_t_glace (D=0)
+t_glace_min=243.15
+t_glace_max=273.15
+exposant_glace=0.5
+iflag_t_glace=3
+
+          # Activation de la thermodynamique de la glace
+iflag_ice_thermo=1
+
+          # normalement elle ne sert plus a rien dans fisrtilp
+          # sinon elle est un peu toxique:
+          # IF (zt(i) .LT. t_coup.and.reevap_ice) zrfln(i)=0. (Jean-Baptiste)
+reevap_ice=n
+
+          #Bergeron
+iflag_bergeron=2
+
+          # temperature dependency of qsat for iterative procedure
+          # temporary flag to switch between the old (CMIP5, D=0)
+          # and new versions (=1) versions 
+iflag_fisrtilp_qsat=4
+
+          #calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1
+
+          # ?????
+facttemps=0
+
+          #calcul eau condensee et fraction nuageuse a partir des PDF
+          # (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+
+          #calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+
+          # Controle des ratqs grande echelle
+iflag_ratqs=4
+ratqsp0=45000
+ratqsdp=10000
+ratqsbas=0.002
+ratqshaut=0.4
+
+          #rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+
+          # Rayons effectif des gouttes nuageuses
+          # ACTIF SI ok_cdnc=0 dans config.def. (D~9 a 12 microns)
+rad_chau1=12
+rad_chau2=11
+
+	  # Rayon effectif des gouttes si ok_cdnc=0
+          # Parameters in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.3
+bl95_b1=0.2
+
+          #  Choix ou non  de  New oliq               
+new_oliq=y
+
+          # Seuils oliqmax, oicemax (en g/kg).
+          # Au dela on precipite directement au sol
+oliqmax=0.0015
+oicemax=0.0015
+
+          #Rayons min et max effectifs des particules des nuages
+rei_min=16
+rei_max=61.29
+
+          # Distribution vetricale sous maille pour le schema de de nuages.
+          # 0: rien
+          # 1: Premiere version A. Jam,
+          # 2 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5
+          # 3 : J. Jouhaud, parametre cloudth_vert_alpha D=0.5/C= 1.32
+          #                           cloudth_vert_alpha_th C=2:91
+iflag_cloudth_vert=3
+cloudth_vert_alpha=0.5
+cloudth_vert_alpha_th=0.5
+
+
+######################################################################
+# Convection 
+######################################################################
+
+          #Convection scheme switch
+          # (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
+iflag_con=3
+
+          #output level of energy conservation diagnostics
+if_ebil=0
+
+          #maximum efficiency of cld water->precipitation conversion (D: 0.993)
+epmax=0.999
+
+          #dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+
+          #Convective closure (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+
+          #Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
+iflag_mix=1
+
+          #weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
+qqa1=1
+qqa2=0
+
+          #Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
+cvl_corr=1
+
+          #Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
+Fmax=0.65
+
+          #altitude, in hPa, above LCL at which buoybase is computed,
+          # def = original: -40
+dpbase=-40
+
+          #reference fractional area of precipitating downdraughts,
+          # def = original: 0.01
+sigdz=0.003
+
+          #unsaturated fraction of precipitating downdraughts, def = original: 0.15
+spfac=0.15
+
+          #relaxation time of cloud base mass flux, def = original: 8000
+tau=8000
+
+          #flag for wb (= vert velocity at LFC);
+          # 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, D=1
+          # Si iflag_wb>=10 : wbeff_min=iflag_wb*0.1
+          # wbmax : assymptotic value 
+flag_wb=50
+wbmax=2.8
+
+          # Divers tests
+ok_convstop=n
+tau_stop=15000
+ok_intermittent=n
+
+          # nouvel epluchage de C.Rio
+          #shedding coefficient (used when iflag_mix_adiab=1)
+iflag_mix_adiab=0
+coef_peel=0.25
+
+          #Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature)
+          #if 1, def=1
+flag_epKEorig=1
+
+          # Case : flag_epKEorig=1
+          # elcrit : max condensed water concentration in kg/kg, D=0.0003,
+          # tlcrit : temperature in degre Celsius, at which Ep=Epmax, D=-55. (original)
+          # original: 0.0011, used only if flag_epKEorig=1
+elcrit=0.0003
+tlcrit=-55
+
+          # Case : flag_epKEorig=0
+          # pbcrit : pressure (hPa), above LCL below which Ep=0, D=150 (original)
+          # ptcrit : pressure (hPa), above LCL above which Ep=Epmax, D=500 (original)
+pbcrit=150
+ptcrit=500
+
+          # Prevent some crashes
+          # Filter out bad wakes
+flag_wk_check_trgl=n
+iflag_wk_check_trgl=2
+iflag_alp_wk_cond=1
+
+
+          # Check whether parcel level temperature and specific humidity
+          # are reasonable and demand that LCL be high enough
+cv_flag_feed=2
+
+          # save 20% CPU 
+ok_optim_yield=y
+
+          # Convective clouds
+iflag_cld_cv=0
+
+          # To get back to bug where convective output variables
+          # were set to 0 at the start of the physics
+ok_bug_cv_trac=n
+
+##########################################################
+# Fermeture convective et couplages
+##########################################################
+
+          # Appel separe des thermiques 
+iflag_pbl_split=10
+
+          #rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+
+          #Constant value to be added to Alp (D: 0.)
+alp_offset=0
+
+          #Convection must reach a level at which T<t_top_max to be active
+t_top_max=1000
+
+          ### nrlmd le 10/04/2012: Declenchement ###
+          #Declenchement par couche-limite (0: deterministe, 1: stochastique)
+iflag_trig_bl=1
+
+          #Surface critique au LCL
+s_trig=12000000
+
+          #Temps de decorrelation entre scenes de cumulus
+tau_trig_shallow=1200
+
+          #Temps de decorrelation entre scenes de cumulonimbus
+tau_trig_deep=1200
+
+          # Pour la stabilisation
+random_notrig_max=0.99
+
+          # Temperature a la quelle on fond les descentes glacees
+tmax_fonte_cv=278.15
+
+          #Fermeture par couche-limite (Nicolas Rochetin)
+          #(0: deterministe, 1: statistique, 2: statistique+convergence
+          # grande echelle)
+iflag_clos_bl=1
+
+          #coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape),
+          # def: 0.33
+stark=0.33
+
+          #lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided
+          # by wakes, def: 0.25
+alpk=0.25
+
+#
+##########################################################
+# Couche limite convective / modele du thermique
+##########################################################
+
+          # Convection seche (D:0, 0:ajustement sec,=>1:modele du thermique) 
+iflag_thermals=18
+
+          # pas de temps du spliting pour les thermiques
+          # TOURNE MAIS POSE PLUS DE PROBLEME QU ELLE N EN RESOUD
+nsplit_thermals=1
+
+          # tau_thermals pour avoir une constante de temps sur les thermiques.
+          # Non valide
+tau_thermals=0
+
+          # Flag controlant le detrainement et l entrainement
+iflag_thermals_ed=8
+
+          # On va chercher l air a z * ( 1+fact_thermals_ed_dz) pour calculer
+          # le detrainement (A. Jam)
+fact_thermals_ed_dz=0.07
+
+          # Une option de plus sur les thermiques.
+iflag_thermals_optflux=0
+
+          #couplage ou non avec la convection
+iflag_coupl=5
+
+          # Seuil pour desactiver les thermiques en cas de forte inversion
+          # en sommet de couche limite. Actif si iflag_thermals impair.
+seuil_inversion=-0.08
+
+          # Reactivation du calcul d un zmax continu pour les thermiques
+          # reactivation d une fermeture humide des thermiques
+          # iflag_thermals_closure=2 (D=1)
+iflag_thermals_closure=2
+
+
+##########################################################
+# Flags wakes
+##########################################################
+
+          #Wake scheme switch (D:0, 0:AR4, 1:New Physics)
+iflag_wake=1
+
+          #multiplicative factor of the damping by gravity waves, def: 4.
+coefgw=4
+
+          #wake density = number of wake centers per m2, def: 8.E-12
+          #wdens_ref=8.E-12
+wdens_ref_o=1e-09
+wdens_ref_l=8e-12
+
+          # Ajustement convectif prealable au calcul des poches
+ok_adjwk=y
+
+
+####################################################################
+#  Conservation 
+####################################################################
+
+          # The source terms of the TKE prognostic equation are diagnosed
+          # from tendencies (du, dv, dT) 
+          # associated with subrgrid scaleamotions and treated as an 
+          # additional heat source.
+          # Controled by a key, iflag_ener_conserv (D=-1):
+          # 0 : no conservation, -1 : old adhoc correction for kinetic E only
+          # (used for CMIP5) 
+          # 1 : conservation, 101 : conversion from kinetic to heat only,
+          # 110 conversion from potential to heat only
+iflag_ener_conserv=10
+
+          #Activation of corrections for water conservation (D: n). 
+          ##The default is n for compatibility with earlier versions.
+          ##generally it should be y.
+ok_conserv_q=y
+
+fl_cor_ebil=1
+
+####################################################################
+# Ozone
+####################################################################
+          # new treatment for ozone into the tropopause
+adjust_tropopause=y
+
+####################################################################
+#  Conservation de l'eau
+#####################################################################
+          # conservation de l eau sur les calottes
+ok_lic_cond=y
+
+cdnc_min=10.
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/ping_LMDZ.xml
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/ping_LMDZ.xml	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/ping_LMDZ.xml	(revision 5176)
@@ -0,0 +1,585 @@
+<!-- $Id: CMIP6_ping_atmos.xml 3353 2018-06-28 09:52:05Z fairhead $ -->
+<!-- Ping files generated by dr2xml 0.27 using Data Request 01.00.21 -->
+<!-- lrealms= ['atmos'] -->
+<!-- exact= False -->
+<!--  listof_home_vars : None
+ tierMax : 3
+ realms_per_context : {'lmdz': ['atmos', 'atmos land'], 'nemo': ['seaIce', 'ocean', 'ocean seaIce', 'ocnBgchem', 'seaIce ocean'], 'orchidee': ['land', 'landIce land', 'land landIce', 'landIce']}
+ max_priority : 3
+ max_file_size_in_floats : 20000000000.0
+ grid_choice : {'IPSL-CM6A-LR': 'LR'}
+ excluded_vars_file : None
+ sizes : {'LR': [20592, 79, 32768, 91, 30, 14, 128]}
+ ping_variables_prefix : CMIP6_
+ source_types : {'IPSL-CM6A-LR': 'AOGCM AER BGC'}
+ path_extra_tables : None
+ grid_policy : native
+ path_special_defs : None
+ mips : {'LR': set(['CORDEX', 'GMMIP', 'RFMIP', 'VolMIP', 'CMIP6', 'ScenarioMIP', 'GeoMIP', 'C4MIP', 'PDRMIP', 'CMIP', 'DECK', 'LUMIP', 'CMIP5', 'CFMIP', 'OMIP', 'DAMIP', 'CCMI', 'SolarMIP', 'VIACSAB', 'SIMIP', 'DCPP', 'ISMIP6', 'AerChemMIP', 'PMIP', 'FAFMIP', 'DynVar', 'LS3MIP', 'SPECS', 'HighResMIP'])}
+ excluded_vars : []
+ orphan_variables : {}
+--> 
+
+<context id="LMDZ">
+<field_definition>
+<!-- for variables which realm equals one of _atmos-->
+   <field id="CMIP6_H2p"           field_ref="dummy_not_provided"           /> <!-- P1 ()  : 2H in total precipitation -->
+   <field id="CMIP6_H2s"           field_ref="dummy_not_provided"           /> <!-- P1 ()  : 2H in solid precipitation -->
+   <field id="CMIP6_H2wv"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : H2 in water vapor -->
+   <field id="CMIP6_O17p"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 17O in total precipitation -->
+   <field id="CMIP6_O17s"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 17O in solid precipitation -->
+   <field id="CMIP6_O17wv"         field_ref="dummy_not_provided"           /> <!-- P1 ()  : O17 in water vapor -->
+   <field id="CMIP6_O18p"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 18O in total precipitation -->
+   <field id="CMIP6_O18s"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 18O in solid precipitation -->
+   <field id="CMIP6_O18wv"         field_ref="dummy_not_provided"           /> <!-- P1 ()  : O18 in water vapor -->
+   <field id="CMIP6_aerasymbnd"    field_ref="dummy_not_provided"           /> <!-- P1 (1) band_aerosol_asymmetry_parameter : Aerosol level asymmetry parameter for each band -->
+   <field id="CMIP6_aeroptbnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) atmosphere_absorption_optical_thickness_due_to_ambient_aerosol_particles : Aerosol level extinction optical depth for each band -->
+   <field id="CMIP6_aerssabnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) single_scattering_albedo_in_air_due_to_ambient_aerosol_particles : Aerosol level single-scattering albedo for each band -->
+   <field id="CMIP6_albdiffbnd"    field_ref="dummy_not_provided"           /> <!-- P1 (1) band_diffuse_albedo : Diffuse surface albedo for each band -->
+   <field id="CMIP6_albdirbnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) band_direct_albedo : Direct surface albedo for each band -->
+   <field id="CMIP6_albisccp"      field_ref="albisccp"                     /> <!-- P1 (1) cloud_albedo : time-means are weighted by the ISCCP Total Cloud Fraction - see  http://cfmip.metoffice.com/COSP.html -->
+   <field id="CMIP6_aod550volso4"  field_ref="od550_STRAT"                  /> <!-- P1 (1e-09) aerosol_optical_depth_due_to_stratospheric_volcanic_aerosols : aerosol optical thickness at 550 nm due to stratospheric volcanic aerosols  -->
+   <field id="CMIP6_areacella"     field_ref="aire"                         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report atmospheric variables and any other variable using that grid (e.g., soil moisture content). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_ccb"           field_ref="pbase"                        /> <!-- P1 (Pa) air_pressure_at_convective_cloud_base : Air Pressure at Convective Cloud Base -->
+   <field id="CMIP6_ccldncl"       field_ref="dummy_XY"                     /> <!-- P1 (m-3) number_concentration_of_convective_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Convective Cloud Tops -->
+   <field id="CMIP6_cct"           field_ref="ptop"                         /> <!-- P1 (Pa) air_pressure_at_convective_cloud_top : Air Pressure at Convective Cloud Top -->
+   <field id="CMIP6_cfadDbze94"    field_ref="cfadDbze94"                   /> <!-- P1 (1) histogram_of_equivalent_reflectivity_factor_over_height_above_reference_ellipsoid : CloudSat Radar Reflectivity CFAD -->
+   <field id="CMIP6_cfadLidarsr532" field_ref="cfad_lidarsr532"             /> <!-- P1 (1) histogram_of_backscattering_ratio_over_height_above_reference_ellipsoid : CALIPSO Scattering Ratio -->
+   <field id="CMIP6_cfc113global"  field_ref="dummy_not_provided"           /> <!-- P1 (1e-12) mole_fraction_of_cfc113_in_air : Global Mean Mole Fraction of CFC113 -->
+   <field id="CMIP6_cfc11global"   field_ref="CFC11_ppt"                    /> <!-- P1 (1e-12) mole_fraction_of_cfc11_in_air : Global Mean Mole Fraction of CFC11 -->
+   <field id="CMIP6_cfc12global"   field_ref="CFC12_ppt"                    /> <!-- P1 (1e-12) mole_fraction_of_cfc12_in_air : Global Mean Mole Fraction of CFC12 -->
+   <field id="CMIP6_ch4"           field_ref="dummy_not_provided"           /> <!-- P1 (mol mol-1) mole_fraction_of_methane_in_air : Mole Fraction of CH4 -->
+   <field id="CMIP6_ch4global"     field_ref="CH4_ppb"                      /> <!-- P1 (1e-09) mole_fraction_of_methane_in_air : Global Mean Mole Fraction of CH4 -->
+   <field id="CMIP6_ci"            field_ref="ftime_con"                    /> <!-- P1 (1) convection_time_fraction : Fraction of time that convection occurs in the grid cell. -->
+   <field id="CMIP6_cl"            field_ref="rneb"> rneb*100.      </field>   <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : Cloud Area Fraction in Atmosphere Layer -->
+   <field id="CMIP6_clc"           field_ref="rnebcon"> rnebcon*100. </field>  <!-- P1 (%) convective_cloud_area_fraction_in_atmosphere_layer : Convective Cloud Area Fraction -->
+   <field id="CMIP6_clcalipso"     field_ref="pclcalipso"                   /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Cloud Area Fraction --> 
+   <field id="CMIP6_clcalipso2"    field_ref="clcalipso2"                   /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Cloud Fraction Undetected by CloudSat --> 
+   <field id="CMIP6_clcalipsoice"  field_ref="clcalipsoice"                 /> <!-- P1 (%) ice_cloud_area_fraction_in_atmosphere_layer : CALIPSO Ice Cloud Fraction -->
+   <field id="CMIP6_clcalipsoliq"  field_ref="clcalipsoliq"                 /> <!-- P1 (%) liquid_cloud_area_fraction_in_atmosphere_layer : CALIPSO Liquid Cloud Fraction -->
+   <field id="CMIP6_cldicemxrat"   field_ref="cldicemxrat"                  /> <!-- P2 (1) cloud_ice_mixing_ratio : Cloud Ice Mixing Ratio -->
+   <field id="CMIP6_cldnci"        field_ref="dummy_XY"                     /> <!-- P1 (m-3) number_concentration_of_ice_crystals_in_air_at_ice_cloud_top : Ice Crystal Number Concentration of Cloud Tops -->
+   <field id="CMIP6_cldncl"        field_ref="cldncl" expr=" @cldncl / @lcc" > cldncl / lcc </field> <!-- P1 (m-3) number_concentration_of_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Cloud Tops -->
+   <field id="CMIP6_cldnvi"        field_ref="dummy_not_provided"           /> <!-- P1 (m-2) atmosphere_number_content_of_cloud_droplets : Column Integrated Cloud Droplet Number -->
+   <field id="CMIP6_cldwatmxrat"   field_ref="cldwatmxrat"                  /> <!-- P2 (1) cloud_liquid_water_mixing_ratio : Cloud Water Mixing Ratio -->
+   <field id="CMIP6_clhcalipso"    field_ref="pclhcalipso"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage High Level Cloud -->
+   <field id="CMIP6_cli"           field_ref="iwcon"                        /> <!-- P1 (kg kg-1) mass_fraction_of_cloud_ice_in_air : Includes both large-scale and convective cloud. This is the mass of cloud ice in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clic"          field_ref="icc3dcon"                     /> <!-- P2 (1) mass_fraction_of_convective_cloud_ice_in_air : Calculated as the mass of convective cloud ice  in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_climodis"      field_ref="climodis"                     /> <!-- P1 (%) ice_cloud_area_fraction : MODIS Ice Cloud Fraction -->
+   <field id="CMIP6_clis"          field_ref="icc3dstra"                    /> <!-- P2 (1) mass_fraction_of_stratiform_cloud_ice_in_air : Calculated as the mass of stratiform cloud ice  in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clisccp"       field_ref="clisccp2"                     /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : ISCCP Percentage Cloud Area -->
+   <field id="CMIP6_clivi"         field_ref="iwp"                          /> <!-- P1 (kg m-2) atmosphere_cloud_ice_content : mass of ice water in the column divided by the area of the column (not just the area of the cloudy portion of the column). Includes precipitating frozen hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clivic"        field_ref="dummy_XY"                     /> <!-- P1 (kg m-2) atmosphere_convective_cloud_ice_content : Convective Ice Water Path  -->
+   <field id="CMIP6_cllcalipso"    field_ref="pcllcalipso"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage Low Level Cloud -->
+   <field id="CMIP6_clmcalipso"    field_ref="pclmcalipso"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage Mid Level Cloud -->
+   <field id="CMIP6_clmisr"        field_ref="clMISR"                       /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MISR cloud area fraction -->
+   <field id="CMIP6_cls"           field_ref="dummy_XYA"                    /> <!-- P1 (%) stratiform_cloud_area_fraction_in_atmosphere_layer : Stratiform Cloud Area Fraction -->
+   <field id="CMIP6_clt"           field_ref="cldt"> cldt*100.        </field> <!-- P1 (%) cloud_area_fraction : for the whole atmospheric column, as seen from the surface or the top of the atmosphere. Includes both large-scale and convective cloud. -->
+   <field id="CMIP6_clt_land"      field_ref="cldt"> cldt*100.        </field> <!-- P1 (%) cloud_area_fraction : Total cloud fraction -->
+   <field id="CMIP6_cltc"          field_ref="dummy_XY"         /> <!-- P1 (%) convective_cloud_area_fraction : For the whole atmospheric column, as seen from the surface or the top of the atmosphere. Includes only convective cloud. -->
+   <field id="CMIP6_cltcalipso"    field_ref="pcltcalipso"                  /> <!-- P1 (%) cloud_area_fraction :  CALIPSO Total Cloud Fraction -->
+   <field id="CMIP6_cltisccp"      field_ref="tclisccp"                     /> <!-- P1 (%) cloud_area_fraction : ISCCP Total Cloud Fraction -->
+   <field id="CMIP6_cltmodis"      field_ref="cltmodis"                     /> <!-- P1 (%) cloud_area_fraction : MODIS Total Cloud  Fraction -->
+   <field id="CMIP6_clw"           field_ref="lwcon"                        /> <!-- P1 (kg kg-1) mass_fraction_of_cloud_liquid_water_in_air : Includes both large-scale and convective cloud. Calculate as the mass of cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cells. Precipitating hydrometeors are included ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwc"          field_ref="lcc3dcon"                     /> <!-- P2 (1) mass_fraction_of_convective_cloud_liquid_water_in_air : Calculated as the mass of convective cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwmodis"      field_ref="clwmodis"                     /> <!-- P1 (%) liquid_water_cloud_area_fraction : MODIS Liquid Cloud Fraction -->
+   <field id="CMIP6_clws"          field_ref="lcc3dstra"                    /> <!-- P2 (1) mass_fraction_of_stratiform_cloud_liquid_water_in_air : Calculated as the mass of stratiform cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwvi"         field_ref="lwp"                          /> <!-- P1 (kg m-2) atmosphere_cloud_condensed_water_content : mass of condensed (liquid + ice) water in the column divided by the area of the column (not just the area of the cloudy portion of the column). Includes precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwvic"        field_ref="dummy_XY"                     /> <!-- P1 (kg m-2) atmosphere_convective_cloud_condensed_water_content : Convective Condensed Water Path -->
+   <field id="CMIP6_co2"           field_ref="dummy_not_provided"           /> <!-- P1 (mol mol-1) mole_fraction_of_carbon_dioxide_in_air :  Mole Fraction of CO2 -->
+   <field id="CMIP6_co23D"         field_ref="dummy_not_provided"           /> <!-- P2 (kg kg-1) CO2_3D_tracer : requested for all Emissions-driven runs -->
+   <field id="CMIP6_co2mass"       field_ref="mass_sum"> co2_ppm*1e-6*44.011/28.97*mass_sum </field> <!-- P1 (kg) atmosphere_mass_of_carbon_dioxide : Total Atmospheric Mass of CO2 -->
+   <field id="CMIP6_co2s"          field_ref="dummy_not_provided"           /> <!-- P2 (1e-06) mole_fraction_of_carbon_dioxide_in_air : Atmosphere CO2 -->
+   <field id="CMIP6_columnmassflux" field_ref="dummy_XY"                    /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : Column integrated mass flux -->
+   <field id="CMIP6_conccmcn"      field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_coarse_mode_ambient_aerosol_in_air : Number Concentration Coarse Mode Aerosol -->
+   <field id="CMIP6_conccn"        field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_ambient_aerosol_in_air : Aerosol Number Concentration -->
+   <field id="CMIP6_concdust"      field_ref="concdust"                     /> <!-- P1 (kg m-3) mass_concentration_of_dust_dry_aerosol_in_air : Concentration of Dust -->
+   <field id="CMIP6_concnmcn"      field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_nucleation_mode_ambient_aerosol_in_air : Number Concentration of Nucleation Mode Aerosol -->
+   <field id="CMIP6_demc"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) convective_cloud_longwave_emissivity : This is the in-cloud emissivity obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_dems"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) stratiform_cloud_longwave_emissivity : This is the in-cloud emissivity obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_diabdrag"      field_ref="dummy_XYA"                    /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_numerical_artefacts : Tendency of Eastward Wind from Numerical Artefacts -->
+   <field id="CMIP6_dmc"           field_ref="upwd"                         /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_deep_convective_mass_flux : The net mass flux  represents the difference between the updraft and downdraft components.   This is calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_dtauc"         field_ref="dummy_not_provided"           /> <!-- P2 (1) atmosphere_optical_thickness_due_to_convective_cloud : This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell -->
+   <field id="CMIP6_dtaus"         field_ref="dummy_not_provided"           /> <!-- P2 (1) atmosphere_optical_thickness_due_to_stratiform_cloud : This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_edt"           field_ref="kz"                           /> <!-- P1 (m2 s-1) atmosphere_heat_diffusivity : Eddy Diffusivity Coefficient for Temperature Variable -->
+   <field id="CMIP6_epfy"          field_ref="dummy_XYA"                    /> <!-- P1 (m3 s-2) northward_eliassen_palm_flux_in_air : Northward Component of the Eliassen-Palm Flux -->
+   <field id="CMIP6_epfz"          field_ref="dummy_XYA"                    /> <!-- P1 (m3 s-2) upward_eliassen_palm_flux_in_air : zonal mean; hence YZT -->
+   <field id="CMIP6_evspsbl"       field_ref="evap"                         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : Evaporation at surface; flux of water into the atmosphere due to conversion of both liquid and solid phases to vapor (from underlying surface and vegetation) -->
+   <field id="CMIP6_evu"           field_ref="evu"                          /> <!-- P1 (m2 s-1) atmosphere_momentum_diffusivity : Eddy Viscosity Coefficients for Momentum -->
+   <field id="CMIP6_fco2antt"      field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_anthropogenic_emission : This is requested only for the emission-driven coupled carbon climate model runs.  Does not include natural fire sources but, includes all anthropogenic sources, including fossil fuel use, cement production, agricultural burning, and sources associated with anthropogenic land use change excluding forest regrowth. -->
+   <field id="CMIP6_fco2fos"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fossil_fuel_combustion : This is the prescribed anthropogenic CO2 flux from fossil fuel use, including cement production, and flaring (but not from land-use changes, agricultural burning, forest regrowth, etc.) -->
+   <field id="CMIP6_fco2nat"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_natural_sources : This is what the atmosphere sees (on its own grid).  This field should be equivalent to the combined natural fluxes of carbon (requested in the L_mon and O_mon tables) that account for natural exchanges between the atmosphere and land or ocean reservoirs (i.e., "net ecosystem biospheric productivity", for land, and "air to sea CO2 flux", for ocean.) -->
+   <field id="CMIP6_grpllsprof"    field_ref="dummy_not_provided"           /> <!-- P2 (kg m-2 s-1) large_scale_graupel_flux : Stratiform Graupel Flux  -->
+   <field id="CMIP6_grplmxrat"     field_ref="dummy_not_provided"           /> <!-- P2 (1) mass_fraction_of_graupel_in_air : Graupel Mixing Ratio -->
+   <field id="CMIP6_h2o"           field_ref="ovap"> ovap+ocond       </field> <!-- P2 (1) mass_fraction_of_water_in_air : includes all phases of water -->
+   <field id="CMIP6_hcfc22global"  field_ref="dummy_not_provided"           /> <!-- P1 (1e-12) mole_fraction_of_hcfc22_in_air : Global Mean Mole Fraction of HCFC22 -->
+   <field id="CMIP6_hfdsl"         field_ref="bils"> bils*fract_ter   </field> <!-- P1 (W m-2) surface_downward_heat_flux_in_air : Ground heat flux -->
+   <field id="CMIP6_hfdsnb"        field_ref="dummy_not_provided"           /> <!-- P1 (W m-2)  : Downward heat flux at snow botton -->
+   <field id="CMIP6_hfls_ist"      field_ref="lat_lic"                      /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : Surface Upward Latent Heat Flux -->
+   <field id="CMIP6_hfls_land"     field_ref="lat_ter"                      /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : Latent heat flux -->
+   <field id="CMIP6_hfls"          field_ref="flat"> flat*(-1.)       </field>  <!-- P1 (W m-2) surface_upward_latent_heat_flux : Surface Upward Latent Heat Flux -->
+   <field id="CMIP6_hfmlt"         field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) surface_snow_and_ice_melt_heat_flux : Energy of fusion -->
+   <field id="CMIP6_hfrs"          field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) temperature_flux_due_to_rainfall_expressed_as_heat_flux_onto_snow_and_ice : Heat transferred to snowpack by rainfall -->
+   <field id="CMIP6_hfsbl"         field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) surface_snow_and_ice_sublimation_heat_flux : Energy of sublimation -->
+   <field id="CMIP6_hfss"          field_ref="sens"> sens*(-1.)       </field> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Surface Upward Sensible Heat Flux -->
+   <field id="CMIP6_hfss_land"     field_ref="sens_ter"                     /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Sensible heat flux -->
+   <field id="CMIP6_hfss_ist"      field_ref="sens_lic"                     /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Surface Upward Sensible Heat Flux -->
+   <field id="CMIP6_hur"           field_ref="rhum"> rhum*100.        </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->
+   <field id="CMIP6_hurs"          field_ref="rh2m"             /> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->
+   <field id="CMIP6_hursmax"       field_ref="rh2m_max" freq_op="1d" > @rh2m_max </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->   
+   <field id="CMIP6_hursmin"       field_ref="rh2m_min" freq_op="1d" > @rh2m_min </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->  
+   <field id="CMIP6_hursminCrop"   field_ref="dummy_not_provided"         /> <!-- P1 (%) relative_humidity : Daily Minimum Near-Surface Relative Humidity over Crop Tile -->
+   <field id="CMIP6_hus"           field_ref="ovap"             /> <!-- P1 (1.0) specific_humidity : Specific Humidity -->
+   <field id="CMIP6_huss"          field_ref="q2m"              /> <!-- P1 (1.0) specific_humidity : This is sampled synoptically. -->
+   <field id="CMIP6_iareafl"       field_ref="fract_sic"         >fract_sic*aire </field> <!-- P3 (m2) floating_ice_shelf_area : Antarctica -->
+   <field id="CMIP6_iareagr"       field_ref="fract_lic"         >fract_lic*aire </field> <!-- P3 (m2) grounded_ice_sheet_area : Greenland -->
+   <field id="CMIP6_intuadse"      field_ref="ue"               /> <!-- P1 (1.e6 J m-1 s-1) vertical_integral_eastward_wind_by_dry_static_energy : Vertically integrated Eastward dry transport (cp.T +zg).u (Mass_weighted_vertical integral of the product of northward wind by dry static_energy per mass unit) -->
+   <field id="CMIP6_intuaw"        field_ref="uwat"             /> <!-- P1 (kg m-1 s-1) vertical_integral_eastward_wind_by_total_water : Vertically integrated Eastward moisture transport (Mass_weighted_vertical integral of the product of eastward wind by total water mass per unit mass) -->
+   <field id="CMIP6_intvadse"      field_ref="ve"               /> <!-- P1 (1.e6 J m-1 s-1) vertical_integral_northward_wind_by_dry_static_energy : Vertically integrated Northward dry transport (cp.T +zg).v (Mass_weighted_vertical integral of the product of northward wind by dry static_energy per mass unit) -->
+   <field id="CMIP6_intvaw"        field_ref="vwat"             /> <!-- P1 (kg m-1 s-1) vertical_integral_northward_wind_by_total_water : Vertically integrated Northward moisture transport (Mass_weighted_vertical integral of the product of northward wind by total water mass per unit mass) -->
+   <field id="CMIP6_jo2"           field_ref="dummy_not_provided"        /> <!-- P1 (s-1) photolysis_rate_of_molecular_oxygen : zonal mean; hence YZT -->
+   <field id="CMIP6_jo3"           field_ref="dummy_not_provided"        /> <!-- P1 (s-1) photolysis_rate_of_ozone : zonal mean; hence YZT --> 
+   <field id="CMIP6_jpdftaureicemodis" field_ref="crimodis"              /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MODIS Optical Thickness-Particle Size joint  distribution, ice -->
+   <field id="CMIP6_jpdftaureliqmodis" field_ref="crlmodis"              /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MODIS Optical Thickness-Particle Size joint  distribution, liquid -->
+   <field id="CMIP6_latitude"      field_ref="dummy_not_provided"        /> <!-- P1 (degrees_north) latitude : Latitude -->
+   <field id="CMIP6_lim"           field_ref="dummy_not_provided"        /> <!-- P2 (kg) land_ice_mass : Greenland -->
+   <field id="CMIP6_limnsw"        field_ref="dummy_not_provided"        /> <!-- P2 (kg) land_ice_mass_not_displacing_sea_water : Greenland -->
+   <field id="CMIP6_loadbc"        field_ref="loadbc"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_black_carbon_dry_aerosol : Load of Black Carbon Aerosol -->
+   <field id="CMIP6_loaddust"      field_ref="loaddust"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_dust_dry_aerosol : Load of Dust -->
+   <field id="CMIP6_loadnh4"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_ammonium_dry_aerosol : Load of NH4 -->
+   <field id="CMIP6_loadno3"       field_ref="loadno3"          /> <!-- P1 (kg m-2) atmosphere_mass_content_of_nitrate_dry_aerosol : Load of NO3 -->
+   <field id="CMIP6_loadoa"        field_ref="loadoa"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Organic Matter -->
+   <field id="CMIP6_loadpoa"       field_ref="loadoa"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Primary Organic Matter -->
+   <field id="CMIP6_loadso4"       field_ref="loadso4"          /> <!-- P1 (kg m-2) atmosphere_mass_content_of_sulfate_dry_aerosol : Load of SO4 -->
+   <field id="CMIP6_loadsoa"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Secondary Organic Matter -->
+   <field id="CMIP6_loadss"        field_ref="loadss"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_seasalt_dry_aerosol : Load of Seasalt -->
+   <field id="CMIP6_longitude"     field_ref="dummy_not_provided"         /> <!-- P1 (degrees_east) longitude : Longitude -->
+   <field id="CMIP6_lwsffluxaero"  field_ref="toplwad"         /> <!-- P2 (W m-2) longwave__flux__due_to_volcanic_aerosols_at_the_surface : downwelling longwave  flux  due to volcanic aerosols at the surface to be diagnosed through double radiation call -->
+   <field id="CMIP6_lwsrfasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_instantaneous_longwave_forcing_due_to_dust : All-sky Surface Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwsrfcsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_instantaneous_longwave_forcing_due_to_dust_in_clearsky : Clear-sky Surface Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwtoaasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing : all sky lw-rf dust at toa -->
+   <field id="CMIP6_lwtoacsaer"    field_ref="toplwad0"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing : Clear-Sky LW-RF Aerosols at TOA -->
+   <field id="CMIP6_lwtoacsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing_due_to_dust_in_clearsky : Clear-sky TOA Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwtoafluxaerocs" field_ref="toplwad0"       /> <!-- P1 (W m-2) longwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling longwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call -->
+   <field id="CMIP6_mc"            field_ref="mc"               /> <!-- P1 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : The net mass flux should represent the difference between the updraft and downdraft components.  The flux is computed as the mass divided by the area of the grid cell. -->
+   <field id="CMIP6_mcd"           field_ref="dnwd"              > (dnwd-dnwd0) &gt; 0 ? (dnwd-dnwd0) : 0 </field> <!-- P2 (kg m-2 s-1) atmosphere_downdraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_mcu"           field_ref="upwd"             /> <!-- P1 (kg m-2 s-1) atmosphere_updraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_md"            field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Wet diameter mode coarse insoluble --> 
+   <field id="CMIP6_mrroLi"        field_ref="mrroli"                    /> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Land Ice Runoff Flux -->
+   <field id="CMIP6_n2o"           field_ref="dummy_not_provided"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrous_oxide_in_air : Mole Fraction of N2O -->
+   <field id="CMIP6_n2oglobal"     field_ref="N2O_ppb"                   /> <!-- P1 (1e-09) mole_fraction_of_nitrous_oxide_in_air : Global Mean Mole Fraction of N2O -->
+   <field id="CMIP6_o3"            field_ref="ozone"                     /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Mole Fraction of O3 -->
+   <field id="CMIP6_od443dust"     field_ref="dummy_not_provided"        /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Optical thickness at 443 nm Dust -->
+   <field id="CMIP6_od550aerso"    field_ref="od550_STRAT"               /> <!-- P1 (1) strat_aerosol_optical_depth : Stratospheric Optical depth at 550 nm (all aerosols) 2D-field (here we limit the computation of OD to the stratosphere only) -->
+   <field id="CMIP6_od550so4so"    field_ref="dummy_not_provided"        /> <!-- P1 (1)  : Stratospheric Optical depth at 550 nm (sulphate only) 2D-field (here we limit the computation of OD to the stratosphere only) --> 
+   <field id="CMIP6_od865dust"     field_ref="dummy_not_provided"        /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Optical thickness at 865 nm Dust -->
+   <field id="CMIP6_parasolRefl" field_ref="parasol_refl"                /> <!-- P1 (1) toa_bidirectional_reflectance : PARASOL Reflectance -->
+   <field id="CMIP6_pctisccp"      field_ref="ctpisccp"                  /> <!-- P1 (Pa) air_pressure_at_cloud_top : time-means weighted by the ISCCP Total Cloud Fraction - see  http://cfmip.metoffice.com/COSP.html -->
+   <field id="CMIP6_pfull"         field_ref="pres"                      /> <!-- P1 (Pa) air_pressure : Pressure on Model Levels -->
+   <field id="CMIP6_phalf"         field_ref="paprs"                     /> <!-- P1 (Pa) air_pressure : Pressure on Model Half-Levels -->
+   <field id="CMIP6_pr"            field_ref="precip"                    /> <!-- P1 (kg m-2 s-1) precipitation_flux : at surface; includes both liquid and solid phases from all types of clouds (both large-scale and convective) -->
+   <field id="CMIP6_prCrop"        field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) precipitation_flux : Precipitation over Crop Tile -->
+   <field id="CMIP6_prc"           field_ref="pluc"                      /> <!-- P1 (kg m-2 s-1) convective_precipitation_flux : at surface; includes both liquid and solid phases. -->
+   <field id="CMIP6_prcprof"       field_ref="pr_con_l"                  /> <!-- P2 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall Flux -->
+   <field id="CMIP6_prcsh"         field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) shallow_convective_precipitation_flux : Shallow convection precipitation flux -->
+   <field id="CMIP6_prhmax"        field_ref="prhmax" freq_op="1h" >   @prhmax   </field> <!-- P1 (kg m-2 s-1) precipitation_flux : Maximum Hourly Precipitation Rate -->
+   <field id="CMIP6_prlsns"        field_ref="pr_lsc_i"                  /> <!-- P2 (kg m-2 s-1) large_scale_snowfall_flux : large-scale precipitation of all forms of water in the solid phase. -->
+   <field id="CMIP6_prlsprof"      field_ref="pr_lsc_l"                  /> <!-- P2 (kg m-2 s-1) large_scale_rainfall_flux : Stratiform Rainfall Flux -->
+   <field id="CMIP6_prra_land"     field_ref="rain_fall"         /> <!-- P2 (kg m-2 s-1) rainfall_flux : rainfall_flux -->
+   <field id="CMIP6_prra_ifs"      field_ref="rain_fall"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : computed as the total mass of liquid water falling as liquid rain  into the ice-free portion of the ocean divided by the area of the ocean portion of the grid cell. -->
+   <field id="CMIP6_prra_ist"      field_ref="rain_fall"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : over Land Ice//quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prra"          field_ref="rain_fall"                 /> <!-- P1 (kg m-2 s-1) rainfall_flux : Rainfall rate -->
+   <field id="CMIP6_prrc_land"     field_ref="rain_con"         /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : convective_rainfall_flux -->
+   <field id="CMIP6_prrc"          field_ref="rain_con"                  /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall rate -->
+   <field id="CMIP6_prrsn"         field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_rainfall_onto_snow : mass_fraction_of_rainfall_onto_snow -->
+   <field id="CMIP6_prsn"          field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : at surface; includes precipitation of all forms of water in the solid phase -->
+   <field id="CMIP6_prsn_ifs"      field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : computed as the total mass per unit time of solid-phase precipitation falling into the ice-free portion of the ocean divided by the area of the ocean portion of the grid cell.   (Snowfall flux includes all types of solid-phase precipitation.) -->
+   <field id="CMIP6_prsn_ist"      field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prsnc_land"    field_ref="pr_con_i"        /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : convective_snowfall_flux -->
+   <field id="CMIP6_prsnc"         field_ref="pr_con_i"                 /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : Convective Snowfall rate -->
+   <field id="CMIP6_prsnsn"        field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_snowfall_onto_snow : mass_fraction_of_snowfall_onto_snow -->
+   <field id="CMIP6_prw"           field_ref="prw"                      /> <!-- P1 (kg m-2) atmosphere_water_vapor_content : Water Vapor Path -->
+   <field id="CMIP6_ps"            field_ref="psol"                     /> <!-- P1 (Pa) surface_air_pressure : not, in general, the same as mean sea-level pressure -->
+   <field id="CMIP6_psitem"        field_ref="dummy_XYA"                /> <!-- P1 (kg s^-1) meridional_streamfunction_transformed_eulerian_mean : zonal mean; hence YZT -->
+   <field id="CMIP6_psl"           field_ref="slp"                      /> <!-- P1 (Pa) air_pressure_at_sea_level : not, in general, the same as surface pressure -->
+   <field id="CMIP6_rainmxrat"     field_ref="dummy_not_provided"       /> <!-- P2 (1) mass_fraction_of_rain_in_air : rain_mixing_ratio -->
+   <field id="CMIP6_reffcclwtop"   field_ref="dummy_not_provided"       /> <!-- P1 (m) effective_radius_of_convective_cloud_liquid_water_particle_at_liquid_water_cloud_top : Cloud-Top Effective Droplet Radius In Convective Cloud -->
+   <field id="CMIP6_reffclic"      field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_convective_cloud_ice_particle : Hydrometeor Effective Radius of Convective Cloud Ice -->
+   <field id="CMIP6_reffclis"      field_ref="ref_ice"                  /> <!-- P2 (m) effective_radius_of_stratiform_cloud_ice_particle : Hydrometeor Effective Radius of Stratiform Cloud Ice -->
+   <field id="CMIP6_reffclwc"      field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_convective_cloud_liquid_water_particle : Hydrometeor Effective Radius of Convective Cloud Liquid Water -->
+   <field id="CMIP6_reffclws"      field_ref="reffclws" expr="@reffclws / @lcc3dstra" > reffclws / lcc3dstra </field> <!-- P2 (m) effective_radius_of_stratiform_cloud_liquid_water_particle : Hydrometeor Effective Radius of Stratiform Cloud Liquid Water -->
+   <field id="CMIP6_reffgrpls"     field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_stratiform_cloud_graupel_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffrainc"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_convective_cloud_rain_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffrains"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_stratiform_cloud_rain_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffsclwtop"   field_ref="reffclwtop" expr="@reffclwtop / @lcc" > reffclwtop / lcc </field> <!-- P1 (m) effective_radius_of_stratiform_cloud_liquid_water_particle_at_liquid_water_cloud_top : Cloud-Top Effective Droplet Radius In Stratiform Cloud -->
+   <field id="CMIP6_reffsnowc"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_convective_cloud_snow_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffsnows"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_stratiform_cloud_snow_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_rld"           field_ref="rld"> rld*(-1.)   </field> <!-- P1 (W m-2) downwelling_longwave_flux_in_air : Downwelling Longwave Radiation --> 
+   <field id="CMIP6_rld4co2"       field_ref="rld4co2"          /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air : Downwelling Longwave Radiation 4XCO2 Atmosphere --> 
+   <field id="CMIP6_rldcs"         field_ref="rldcs"            /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Longwave Radiation -->
+   <field id="CMIP6_rldcs4co2"     field_ref="rldcs4co2"        /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlds_ist"      field_ref="LWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rlds"          field_ref="LWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rldscs"        field_ref="LWdnSFCclr"       /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rls"           field_ref="soll"             /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : Net Longwave Surface Radiation -->
+   <field id="CMIP6_rls_land"      field_ref="flw_ter"             /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : Net longwave radiation -->
+   <field id="CMIP6_rlu"           field_ref="rlu"              /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rlu4co2"       field_ref="rlu4co2"          /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air : Upwelling Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlucs"         field_ref="rlucs"            /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air_assuming_clear_sky : Includes also the fluxes at the surface and TOA. -->
+   <field id="CMIP6_rlucs4co2"     field_ref="rlucs4co2"        /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlus_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave Radiation -->
+   <field id="CMIP6_rlus"          field_ref="LWupSFC"          /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave Radiation -->
+   <field id="CMIP6_rlut"          field_ref="topl"             /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : TOA Outgoing Longwave Radiation -->
+   <field id="CMIP6_rlut4co2"      field_ref="rlut4co2"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : TOA Outgoing Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlutcs"        field_ref="topl0"            /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Longwave Radiation -->
+   <field id="CMIP6_rlutcs4co2"    field_ref="rlutcs4co2"       /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsd"           field_ref="rsd"              /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rsd4co2"       field_ref="rsd4co2"          /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air : Downwelling Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsdcs"         field_ref="rsdcs"            /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Raiation -->
+   <field id="CMIP6_rsdcs4co2"     field_ref="rsdcs4co2"        /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsdcsbnd"      field_ref="dummy_not_provided"        />   <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Radiation at each level for each band -->
+   <field id="CMIP6_rsds"          field_ref="SWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : This is the 3-hour mean flux. -->
+   <field id="CMIP6_rsds_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : Surface Downwelling Shortwave Radiation -->
+   <field id="CMIP6_rsdscs"        field_ref="SWdnSFCclr"       /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Downwelling Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsdscsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Downwelling Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsdscsdiff"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_diffuse_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Diffuse Downwelling Clear Sky Shortwave Radiation --> 
+   <field id="CMIP6_rsdsdiff"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_diffuse_downwelling_shortwave_flux_in_air : Surface Diffuse Downwelling Shortwave Radiation -->
+   <field id="CMIP6_rsdt"          field_ref="SWdnTOA"          /> <!-- P1 (W m-2) toa_incoming_shortwave_flux : TOA Incident Shortwave Radiation -->
+   <field id="CMIP6_rss_land"      field_ref="fsw_ter"             /> <!-- P1 (W m-2) surface_net_downward_shortwave_flux : Net shortwave radiation -->
+   <field id="CMIP6_rss"           field_ref="sols"             /> <!-- P1 (W m-2) surface_net_downward_shortwave_flux : Net Shortwave Surface Radiation -->
+   <field id="CMIP6_rsu"           field_ref="rsu"              /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rsu4co2"       field_ref="rsu4co2"          /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air : Upwelling Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsucs"         field_ref="rsucs"            />  <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Includes also the fluxes at the surface and TOA. -->
+   <field id="CMIP6_rsucs4co2"     field_ref="rsucs4co2"        /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsucsbnd"      field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Shortwave Radiation at each level for each band -->
+   <field id="CMIP6_rsus_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave Radiation -->
+   <field id="CMIP6_rsus"          field_ref="SWupSFC"          /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave Radiation --> 
+   <field id="CMIP6_rsuscs"        field_ref="SWupSFCclr"       /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Upwelling Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsuscsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Upwelling Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsut"          field_ref="SWupTOA"          /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : TOA Outgoing Shortwave Radiation -->
+   <field id="CMIP6_rsut4co2"      field_ref="rsut4co2"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : TOA Outgoing Shortwave Radiation in 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsutcs"        field_ref="SWupTOAclr"       /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsutcs4co2"    field_ref="rsutcs4co2"       /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsutcsafbnd"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) band_toa_outgoing_shortwave_flux_assuming_clean_clear_sky : TOA Outgoing Clear-Sky, Aerosol-Free Shortwave Radiation in Bands -->
+   <field id="CMIP6_rsutcsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rtmt"          field_ref="nettop"           /> <!-- P1 (W m-2) net_downward_radiative_flux_at_top_of_atmosphere_model : i.e., at the top of that portion of the atmosphere where dynamics are explicitly treated by the model. This is reported only if it differs from the net downward radiative flux at the top of the atmosphere. -->
+   <field id="CMIP6_rv"            field_ref="dummy_XY"         /> <!-- P1 (s-1) atmosphere_relative_vorticity : Relative Vorticity at 850 hPa -->
+   <field id="CMIP6_sblnosn"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) sublimation_amount_assuming_no_snow : sublimation_amount_assuming_no_snow -->
+   <field id="CMIP6_sci"           field_ref="ftime_th"         /> <!-- P1 (1.0) shallow_convection_time_fraction : Fraction of time that shallow convection occurs in the grid cell. -->
+   <field id="CMIP6_scldncl"       field_ref="dummy_XY"         /> <!-- P1 (m-3) number_concentration_of_stratiform_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Stratiform Cloud Tops -->
+   <field id="CMIP6_sconcdust"     field_ref="sconcdust"        /> <!-- P1 (kg m-3) mass_concentration_of_dust_dry_aerosol_in_air : Surface Concentration of Dust -->
+   <field id="CMIP6_sconcso4"      field_ref="sconcso4"         /> <!-- P1 (kg m-3) mass_concentration_of_sulfate_dry_aerosol_in_air : Surface Concentration of SO4 -->
+   <field id="CMIP6_sconcss"       field_ref="sconcss"          /> <!-- P1 (kg m-3) mass_concentration_of_seasalt_dry_aerosol_in_air : Surface Concentration of Seasalt -->
+   <field id="CMIP6_sfcWind"       field_ref="wind10m"          />  <!-- P1 (m s-1) wind_speed : Near surface wind speed -->
+   <field id="CMIP6_sfcWindmax"    field_ref="sfcWindmax" freq_op="1d"   > @sfcWindmax </field> <!-- P1 (m s-1) wind_speed : Mean Daily Maximum Near-Surface Wind Speed --> 
+   <field id="CMIP6_sftlf"         field_ref="pourc_ter"> pourc_ter+pourc_lic </field> <!-- P1 (%) land_area_fraction : Land Area Fraction -->
+   <field id="CMIP6_siltfrac"      field_ref="dummy_not_provided"       /> <!-- P1 (1.0)  : Silt Fraction -->
+   <field id="CMIP6_smc"           field_ref="f_th"        /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_shallow_convective_mass_flux : The net mass flux represents the difference between the updraft and downdraft components.  For models with a distinct shallow convection scheme, this is calculated as convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_snmsl"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux_into_soil_layer : surface_snow_melt_flux_into_soil_layer -->
+   <field id="CMIP6_snowmxrat"     field_ref="dummy_not_provided"         /> <!-- P2 (1.0) mass_fraction_of_snow_in_air : snow_mixing_ratio -->
+   <field id="CMIP6_snrefr"        field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : surface_snow_and_ice_refreezing_flux -->
+   <field id="CMIP6_snwc"          field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) canopy_snow_amount : canopy_snow_amount -->
+   <field id="CMIP6_solbnd"        field_ref="solbnd"         />  <!-- P1 (W m-2) solar_irradiance : Top-of-Atmosphere Solar Insolation for each band -->
+   <field id="CMIP6_swsffluxaero"  field_ref="topswad"         /> <!-- P2 (W m-2) shortwave__flux_due_to_volcanic_aerosols_at__the_surface : downwelling shortwave  flux due to volcanic aerosols at  the surface to be diagnosed through double radiation call -->
+   <field id="CMIP6_swsrfasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) tendency_of_all_sky_surface_shortwave_flux_due_to_dust_ambient_aerosol_particles : All-sky Surface Shortwave radiative flux due to Dust -->
+   <field id="CMIP6_swsrfcsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) tendency_of_clear_sky_surface_shortwave_flux_due_to_dust_ambient_aerosol_particles : Clear-sky Surface Shortwave radiative flux due to Dust -->
+   <field id="CMIP6_swtoaasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_shortwave_forcing : all sky sw-rf dust at toa -->
+   <field id="CMIP6_swtoacsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_shortwave_forcing : clear sky sw-rf dust at toa -->
+   <field id="CMIP6_swtoafluxaerocs" field_ref="topswad0"       /> <!-- P1 (W m-2) shortwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling shortwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call -->
+   <field id="CMIP6_sza"           field_ref="sza"              /> <!-- P1 (degree) solar_zenith_angle : solar zenith angle -->
+   <field id="CMIP6_t2"            field_ref="temp"> temp*temp   </field> <!-- P2 (K2) square_of_air_temperature : square_of_air_temperature -->
+   <field id="CMIP6_ta"            field_ref="temp"             /> <!-- P1 (K) air_temperature : Air Temperature -->
+   <field id="CMIP6_tas_ist"       field_ref="t2m_lic"          /> <!-- P1 (K) air_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tas"           field_ref="t2m"              /> <!-- P1 (K) air_temperature : This is sampled synoptically. -->
+   <field id="CMIP6_tasmax"        field_ref="tasmax" freq_op="1d"> @tasmax </field> <!-- P1 (K) air_temperature : monthly mean of the daily-maximum near-surface air temperature. -->  
+   <field id="CMIP6_tasmaxCrop"    field_ref="dummy_not_provided"         /> <!-- P1 (K) air_temperature : Daily Maximum Near-Surface Air Temperature over Crop Tile -->
+   <field id="CMIP6_tasmin"        field_ref="tasmin" freq_op="1d"> @tasmin  </field> <!-- P1 (K) air_temperature : Daily Minimum Near-Surface Air Temperature -->  
+   <field id="CMIP6_tasminCrop"    field_ref="dummy_not_provided"         /> <!-- P1 (K) air_temperature : Daily Minimum Near-Surface Air Temperature over Crop Tile -->
+   <field id="CMIP6_tau_stress"    field_ref="taux"              >  sqrt( taux^2 + tauy^2)        </field> <!-- P1 (N m-2) surface_downward_stress : Momentum flux --> 
+   <field id="CMIP6_tauu"          field_ref="taux"             /> <!-- P1 (Pa) surface_downward_eastward_stress : Surface Downward Eastward Wind Stress -->
+   <field id="CMIP6_tauupbl"       field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_downward_eastward_stress_due_to_planetary_boundary_layer : surface -->
+   <field id="CMIP6_tauv"          field_ref="tauy"             /> <!-- P1 (Pa) surface_downward_northward_stress : Surface Downward Northward Wind Stress --> 
+   <field id="CMIP6_tauvpbl"       field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_downward_northward_stress_due_to_planetary_boundary_layer : surface -->
+   <field id="CMIP6_tdps"          field_ref="pvap"> 273.16 + (273.16 - 35.86)/(17.269/log(pvap/611.14)-1.)      </field> <!-- P1 (K) dew_point_temperature : 2m dewpoint temperature -->
+   <field id="CMIP6_tendacabf"     field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_surface_mass_balance : Greenland -->
+   <field id="CMIP6_tendlibmassbf" field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_basal_mass_balance : Antarctica -->
+   <field id="CMIP6_tendlicalvf"   field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_calving : Antarctica -->
+   <field id="CMIP6_tnhus"         field_ref="tnhus"            /> <!-- P1 (s-1) tendency_of_specific_humidity : Tendency of Specific Humidity -->
+   <field id="CMIP6_tnhusa"        field_ref="dqdyn"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_advection : Tendency of Specific Humidity due to Advection -->
+   <field id="CMIP6_tnhusc"        field_ref="tnhusc"           /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_convection : Tendencies from cumulus convection scheme. -->
+   <field id="CMIP6_tnhusd"        field_ref="dqvdf"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_diffusion : This includes any horizontal or vertical numerical moisture diffusion not associated with the parametrized moist physics or the resolved dynamics.  For example, any vertical diffusion which is part of the boundary layer mixing scheme should be excluded, as should any diffusion which is included in the terms from the resolved dynamics.   This term is required to check the closure of the moisture budget. -->
+   <field id="CMIP6_tnhusmp"       field_ref="dqphy"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_model_physics : This includes sources and sinks from parametrized moist physics (e.g. convection, boundary layer, stratiform condensation/evaporation, etc.) and excludes sources and sinks from resolved dynamics or from horizontal or vertical numerical diffusion not associated with model physicsl.  For example any diffusive mixing by the boundary layer scheme would be included. -->
+   <field id="CMIP6_tnhuspbl"      field_ref="dqvdf"             > dqvdf+dqthe </field> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_boundary_layer_mixing : alevel site time1 -->
+   <field id="CMIP6_tnhusscp"      field_ref="dqlscst"          /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_stratiform_clouds_and_precipitation : Tendency of Specific Humidity Due to Stratiform Clouds and Precipitation -->
+   <field id="CMIP6_tnhusscpbl"    field_ref="tnhusscpbl"       /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing : To be specified only in  models which do not separate budget terms for stratiform cloud, precipitation and boundary layer schemes.  Includes all bounday layer terms including and diffusive terms. -->
+   <field id="CMIP6_tnt"           field_ref="tnt"              /> <!-- P1 (K s-1) tendency_of_air_temperature : Tendency of Air Temperature -->
+   <field id="CMIP6_tnta"          field_ref="dtdyn"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_advection : Tendency of Air Temperature due to Advection -->
+   <field id="CMIP6_tntc"          field_ref="tntc"             /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_convection : zonal mean; hence YZT -->
+   <field id="CMIP6_tntd"          field_ref="dtajs"             > dtajs+dtoro+dtlif+dthin </field> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_numerical_diffusion : Tendency of Air Temperature due to Numerical Diffusion -->
+   <field id="CMIP6_tntmp"         field_ref="dtphy"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_model_physics : This includes sources and sinks from parametrized physics (e.g. radiation, convection, boundary layer, stratiform condensation/evaporation, etc.). It excludes sources and sinks from resolved dynamics and numerical diffusion not associated with parametrized physics.  For example, any vertical diffusion which is part of the boundary layer mixing scheme should be included, while numerical diffusion applied in addition to physics or resolved dynamics should be excluded.  This term is required to check the closure of the heat budget. -->
+   <field id="CMIP6_tntnogw"       field_ref="dummy_XYA"        /> <!-- P2 (K s-1) temperature_tendency_due_to_dissipation_nonorographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_tntogw"        field_ref="dtoro"            /> <!-- P2 (K s-1) temperature_tendency_due_to_dissipation_orographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_tntpbl"        field_ref="dtvdf"             > dtvdf + dtthe </field> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_boundary_layer_mixing : alevel site time1 -->
+   <field id="CMIP6_tntr"          field_ref="tntr"             /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_radiative_heating : Tendency of Air Temperature due to Radiative Heating -->
+   <field id="CMIP6_tntrlcs"       field_ref="dtlw0"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_longwave_heating_assuming_clear_sky : zonal mean; hence YZT -->
+   <field id="CMIP6_tntrscs"       field_ref="dtsw0"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_shortwave_heating_assuming_clear_sky : zonal mean; hence YZT -->
+   <field id="CMIP6_tntscp"        field_ref="dtlschr"          /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_stratiform_clouds_and_precipitation : alevel site time1 -->
+   <field id="CMIP6_tntscpbl"      field_ref="tntscpbl"         /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing : To be specified only in  models which do not separate cloud, precipitation and boundary layer terms.  Includes all boundary layer terms including diffusive ones. -->
+   <field id="CMIP6_tr"            field_ref="tsol"             /> <!-- P1 (K) surface_temperature : Surface Radiative Temperature -->
+   <field id="CMIP6_ts"            field_ref="tsol"             /> <!-- P1 (K) surface_temperature : Surface temperature (skin for open ocean) -->
+   <field id="CMIP6_ts_ist"        field_ref="tsol_lic"         /> <!-- P1 (K) surface_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsns"          field_ref="dummy_not_provided"         /> <!-- P1 (K) surface_temperature : Snow Surface Temperature -->
+   <field id="CMIP6_twap"          field_ref="vitw">vitw*temp </field> <!-- P2 (K Pa s-1) product_of_omega_and_air_temperature : air_temperature_times_omega -->
+   <field id="CMIP6_u2"            field_ref="vitu"              > vitu*vitu</field> <!-- P2 (m2 s-2) square_of_eastward_wind : square_of_eastward_wind -->
+   <field id="CMIP6_ua"            field_ref="vitu"             /> <!-- P1 (m s-1) eastward_wind : Eastward Wind -->
+   <field id="CMIP6_uas"           field_ref="u10m"             /> <!-- P1 (m s-1) eastward_wind : Eastward Near-Surface Wind -->
+   <field id="CMIP6_uqint"         field_ref="uq"               /> <!-- P1 (m2 s-1) integral_of_product_of_eastward_wind_and_specific_humidity_wrt_height : Eastward integrated moisture transport -->
+   <field id="CMIP6_ut"            field_ref="vitu"              > vitu*temp </field> <!-- P2 (K m s-1) product_of_eastward_wind_and_air_temperature : air_temperature_times_eastward_wind -->
+   <field id="CMIP6_utendepfd"     field_ref="dummy_XYA"        /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_eliassen_palm_flux_divergence : Called "acceldivf" in CCMI table; we suggest new name. zonal mean; hence YZT -->
+   <field id="CMIP6_utendnogw"     field_ref="du_gwd_rando"> du_gwd_rando + du_gwd_front </field> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_nonorographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_utendogw"      field_ref="duoro"        /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_orographic_gravity_wave_drag : u-tendency orographic gravity wave drag -->
+   <field id="CMIP6_utendvtem"     field_ref="dummy_XYA"        /> <!-- P1 (m s-1 d-1) u-tendency_by_wstar_advection : zonal mean; hence YZT -->
+   <field id="CMIP6_utendwtem"     field_ref="dummy_XYA"        /> <!-- P1 (m s-1 d-1) u-tendency_by_vstar_advection : zonal mean; hence YZT -->
+   <field id="CMIP6_uv"            field_ref="vitu"> vitu*vitv  </field> <!-- P2 (m2 s-2) product_of_eastward_wind_and_northward_wind : eastward_wind_times_northward_wind -->
+   <field id="CMIP6_uwap"          field_ref="vitu"> vitu*vitw  </field> <!-- P2 (Pa m s-2) product_of_eastward_wind_and_omega : eastward_wind_times_omega -->
+   <field id="CMIP6_v2"            field_ref="vitv"> vitv*vitv  </field> <!-- P2 (m2 s-2) square_of_northward_wind : square_of_northwardwind -->
+   <field id="CMIP6_va"            field_ref="vitv"             /> <!-- P1 (m s-1) northward_wind : Northward Wind -->
+   <field id="CMIP6_vas"           field_ref="v10m"             /> <!-- P1 (m s-1) northward_wind : Northward Near-Surface Wind -->
+   <field id="CMIP6_vortmean"      field_ref="dummy_XY"         /> <!-- P1 (s-1) atmosphere_relative_vorticity : Mean vorticity over 850-600 hPa layer -->
+   <field id="CMIP6_vqint"         field_ref="vq"               /> <!-- P1 (m2 s-1) integral_of_product_of_northward_wind_and_specific_humidity_wrt_height : Northward integrated moisture transport -->
+   <field id="CMIP6_vt"            field_ref="vitv"> vitv*temp  </field> <!-- P2 (K m s-1) product_of_northward_wind_and_air_temperature : air_temperature_times_northward_wind -->
+   <field id="CMIP6_vtem"          field_ref="dummy_XYA"        /> <!-- P1 (m s-1) northward_transformed_eulerian_mean_air_velocity : Transformed Eulerian Mean northward wind --> 
+   <field id="CMIP6_vtendnogw"     field_ref="dv_gwd_rando">dv_gwd_rando + dv_gwd_front </field> <!-- P2 (m s-2) tendency_of_northward_wind_due_to_nonorographic_gravity_wave_drag : v-tendency nonorographic gravity wave drag -->
+   <field id="CMIP6_vtendogw"      field_ref="dvoro"        /> <!-- P2 (m s-2) tendency_of_northward_wind_due_to_orographic_gravity_wave_drag : v-tendency orographic gravity wave drag -->
+   <field id="CMIP6_vwap"          field_ref="vitv"> vitv*vitw  </field> <!-- P2 (Pa m s-2) product_of_northward_wind_and_omega : northward_wind_times_omega -->
+   <field id="CMIP6_wap"           field_ref="vitw"             /> <!-- P1 (Pa s-1) lagrangian_tendency_of_air_pressure : commonly referred to as "omega", this represents the vertical component of velocity in pressure coordinates (positive down) -->
+   <field id="CMIP6_wap2"          field_ref="vitw"> vitw*vitw  </field> <!-- P2 (Pa2 s-2) square_of_lagrangian_tendency_of_air_pressure : square_of_omega -->
+   <field id="CMIP6_wbptemp"       field_ref="dummy_XYA"        /> <!-- P1 (K) wet_bulb_potential_temperature : plev_7 -->
+   <field id="CMIP6_wtem"          field_ref="dummy_XYA"        /> <!-- P1 (m s-1)  : Transformed Eulerian Mean upward wind -->
+   <field id="CMIP6_xgwdparam"     field_ref="east_gwstress"    /> <!-- P2 (Pa) atmosphere_eastward_stress_due_to_gravity_wave_drag : x_gravity_wave_drag_param --> 
+   <field id="CMIP6_ygwdparam"     field_ref="west_gwstress"    /> <!-- P2 (Pa) atmosphere_northward_stress_due_to_gravity_wave_drag : y_gravity_wave_drag_param -->
+   <field id="CMIP6_zfull"         field_ref="zfull"            /> <!-- P2 (m) height_above_reference_ellipsoid : This is actual height above mean sea level, not geopotential height -->
+   <field id="CMIP6_zg"            field_ref="geoph"            /> <!-- P1 (m) geopotential_height : Geopotential height on the 1000 hPa surface -->
+   <field id="CMIP6_zhalf"         field_ref="zhalf"            /> <!-- P2 (m) height_above_reference_ellipsoid : This is actual height above mean sea level, not geopotential height.  This is actual height above mean sea level, not geopotential height.  Includes both the top of the model atmosphere and surface levels. -->
+   <field id="CMIP6_zmla"          field_ref="s_pblh"           /> <!-- P1 (m) atmosphere_boundary_layer_thickness : Height of Boundary Layer -->
+   <field id="CMIP6_zmlwaero"      field_ref="cool_volc"        /> <!-- P1 (K s-1) longwave_heating_rate_due_to_volcanic_aerosols : longwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required -->
+   <field id="CMIP6_zmswaero"      field_ref="heat_volc"        /> <!-- P1 (K s-1) shortwave_heating_rate_due_to_volcanic_aerosols : shortwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required -->
+   <field id="CMIP6_zmtnt"         field_ref="dtphy"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_diabatic_processes : Zonal Mean Diabatic Heating Rates -->
+   <field id="CMIP6_ap" field_ref="Ahyb" /><!-- Ap hybrid coordinate array for level interfaces -->
+   <field id="CMIP6_ap_bnds" field_ref="Ahyb_bounds" /><!-- Ap hybrid coordinate bounds -->
+   <field id="CMIP6_b" field_ref="Bhyb" /><!-- Bp hybrid coordinate array for level interfaces -->
+   <field id="CMIP6_b_bnds" field_ref="Bhyb_bounds" /><!-- Bp hybrid coordinate bounds -->
+   <field id="CMIP6_ahp" field_ref="Ahyb_mid" /><!-- Aps hybrid coordinate array for mid-levels -->
+   <field id="CMIP6_ahp_bnds" field_ref="Ahyb_mid_bounds" /><!-- Aps hybrid coordinate bounds -->
+   <field id="CMIP6_bh" field_ref="Bhyb_mid" /><!-- Bps hybrid coordinate array for mid-levels -->
+   <field id="CMIP6_bh_bnds" field_ref="Bhyb_mid_bounds" /><!-- Bps hybrid coordinate bounds -->
+
+
+
+<!-- for variables which realm equals one of _aerosol-->
+   <field id="CMIP6_abs550aer"     field_ref="abs550aer"         /> <!-- P1 (1.0) atmosphere_absorption_optical_thickness_due_to_ambient_aerosol : Ambient Aerosol Absorption Optical Thickness at 550 nm -->
+   <field id="CMIP6_airmass"       field_ref="mass"        /> <!-- P1 (kg m-2) atmosphere_mass_of_air_per_unit_area : Vertically integrated mass content of air in layer -->
+   <field id="CMIP6_aoanh"         field_ref="dummy_XYA"        /> <!-- P1 (yr) tracer_lifetime : Fixed surface layer mixing ratio over 30o-50oN (0 ppbv), uniform fixed source (at all levels) everywhere else (source is unspecified but must be constant in space and time and documented). Note that the source could be 1yr/yr, so the tracer concentration provides mean age in years. For method using linearly increasing tracer include a method attribute: "linearly increasing tracer"For method using uniform source (1yr/yr) include a method attribute: "uniform source" -->
+   <field id="CMIP6_bldep"         field_ref="dummy_XY"         /> <!-- P3 (m) atmosphere_boundary_layer_thickness : Boundary layer depth -->
+   <field id="CMIP6_bry"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_inorganic_bromine_in_air : Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Bry = Br + BrO + HOBr + HBr + BrONO2 + BrCl Definition: Total inorganic bromine (e.g., HBr and inorganic bromine oxides and radicals (e.g., BrO, atomic bromine (Br), bromine nitrate (BrONO2)) resulting from degradation of bromine-containing organic source gases (halons, methyl bromide, VSLS), and natural inorganic bromine sources (e.g., volcanoes, sea salt, and other aerosols) add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_bs550aer"      field_ref="dummy_XYA"        /> <!-- P1 (m-1 sr-1) volume_lidar_backwards_scattering_coefficient_in_air_due_to_ambient_aerosol_particles : Aerosol  Backscatter at 550nm and 180 degrees, computed from extinction and lidar ratio -->
+   <field id="CMIP6_c2h2"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ethyne_in_air : C2H2 volume mixing ratio -->
+   <field id="CMIP6_c2h6"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ethane_in_air : C2H6 volume mixing ratio -->
+   <field id="CMIP6_c3h6"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_propene_in_air : C3H6  volume mixing ratio -->
+   <field id="CMIP6_c3h8"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_propane_in_air : C3H8  volume mixing ratio -->
+   <field id="CMIP6_ccn"           field_ref="dummy_XY"         /> <!-- P1 (m-3) number_concentration_of_cloud_condensation_nuclei_at_stp_in_air : proposed name: number_concentration_of_ambient_aerosol_in_air_at_liquid_water_cloud_top -->
+   <field id="CMIP6_cdnc"          field_ref="scdnc" expr="@scdnc / @lcc3d " > scdnc / lcc3d        </field><!-- P1 (m-3) number_concentration_of_cloud_liquid_water_particles_in_air : Cloud Droplet Number Concentration in liquid water clouds. -->
+   <field id="CMIP6_ch3coch3"      field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_acetone_in_air : CH3COCH3  volume mixing ratio -->
+   <field id="CMIP6_cheaqpso4"     field_ref="dummy_XYA"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_aqueous_phase_net_chemical_production : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_aqueous_phase_net_chemical_production -->
+   <field id="CMIP6_chegpso4"      field_ref="dummy_XYA"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_gaseous_phase_net_chemical_production : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_gas_phase_net_chemical_production -->
+   <field id="CMIP6_chepasoa"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : anthropogenic part of chepsoa -->
+   <field id="CMIP6_chepsoa"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : If model lumps SOA emissions with POA, then the sum of POA and SOA emissions is reported as OA emissions. ""mass"" refers to the mass of primary organic matter, not mass of organic carbon alone. -->
+   <field id="CMIP6_cly"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_inorganic_chlorine_in_air : Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Cly = HCl + ClONO2 + HOCl + ClO + Cl + 2*Cl2O2 +2Cl2 + OClO + BrCl Definition: Total inorganic stratospheric chlorine (e.g., HCl, ClO) resulting from degradation of chlorine-containing source gases (CFCs, HCFCs, VSLS), and natural inorganic chlorine sources (e.g., sea salt and other aerosols) add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_co"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_carbon_monoxide_in_air : CO volume mixing ratio -->
+   <field id="CMIP6_cod"           field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_cloud : Cloud Optical Depth -->
+   <field id="CMIP6_depdust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_total_deposition : Balkanski - LSCE -->
+   <field id="CMIP6_dms"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_dimethyl_sulfide_in_air : DMS volume mixing ratio -->
+   <field id="CMIP6_drybc"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_dry_deposition : Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_drydust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_dry_deposition : Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_drynh3"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_drynh4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_drynoy"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_dry_deposition : NOy is the sum of all simulated oxidized nitrogen species out of NO, NO2, HNO3, HNO4, NO3aerosol, NO3(radical), N2O5, PAN, other organic nitrates. Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_dryo3"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_dryoa"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_dry_deposition : Tendency of atmosphere mass content of organic dry aerosol due to dry deposition: This is the sum of dry deposition of POA and dry deposition of SOA (see next two entries). 'Mass' refers to the mass of organic matter, not mass of organic carbon alone.  We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available. Was called dry_pom in old ACCMIP Excel table. Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_dryso2"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_dryso4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_dryss"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_dry_deposition : Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_ec550aer"      field_ref="ec550aer"        /> <!-- P1 (m-1) volume_extinction_coefficient_in_air_due_to_ambient_aerosol_particles : Aerosol Extinction at 550nm -->
+   <field id="CMIP6_emiaco"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : anthrophogenic  emission of CO -->
+   <field id="CMIP6_emianox"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : Store flux as Nitrogen. Anthropogenic fraction. NOx=NO+NO2, Includes agricultural waste burning but no other biomass burning. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiaoa"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : anthropogenic part of emioa -->
+   <field id="CMIP6_emibc"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emibvoc"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_biogenic_nmvoc_expressed_as_carbon_due_to_emission : Integrate 3D emission field vertically to 2d field._If_ fixed molecular weight of NMVOC is not available in model, please provide in units of kilomole m-2 s-1 (i.e. kg m-2 s-1 as if model NMVOC had molecular weight of 1) and add a comment to your file. -->
+   <field id="CMIP6_emico"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emidms"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emidust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiisop"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_isoprene_due_to_emission : Integrate 3D emission field vertically to 2d field -->
+   <field id="CMIP6_emilnox"       field_ref="dummy_XYA"        /> <!-- P1 (mol s-1) tendency_of_atmosphere_moles_of_nox_expressed_as_nitrogen : Integrate the NOx production for lightning over model layer. proposed name: tendency_of_atmosphere_mass_content_of_nox_from_lightning -->
+   <field id="CMIP6_eminh3"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_eminox"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : NOx=NO+NO2. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emioa"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : This is the sum of total emission of POA and total production of SOA (emipoa+chepsoa). ""Mass"" refers to the mass of organic matter, not mass of organic carbon alone. We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available.  Integrate 3D chemical production and emission field vertically to 2d field. -->
+   <field id="CMIP6_emiso2"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiso4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_emission : Direct primary emission does not include secondary sulfate production. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiss"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emivoc"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission : Integrate 3D emission field vertically to 2d field. _If_ fixed molecular weight of NMVOC is not available in model, please provide in units of kilomole m-2 s-1 (i.e. kg m-2 s-1 as if model NMVOC had molecular weight of 1) and add a comment to your file. -->
+   <field id="CMIP6_hcho"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_formaldehyde_in_air : Formaldehyde volume mixing ratio -->
+   <field id="CMIP6_hcl"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydrogen_chloride_in_air : HCl volume mixing ratio -->
+   <field id="CMIP6_hno3"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitric_acid_in_air : HNO3 volume mixing ratio -->
+   <field id="CMIP6_ho2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydroperoxyl_radical_in_air : HO2 volume mixing ratio -->
+   <field id="CMIP6_isop"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_isoprene_in_air : Isoprene volume mixing ratio -->
+   <field id="CMIP6_jno2"          field_ref="dummy_XYA"        /> <!-- P1 (s-1) photolysis_rate_of_nitrogen_dioxide : photolysis rate of NO2 -->
+   <field id="CMIP6_lossch4"       field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_methane_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lossco"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_of_mole_concentration_of_carbon_monoxide_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lossn2o"       field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_of_mole_concentration_of_nitrous_oxide_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lwp"           field_ref="cldq"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_cloud_liquid_water : liquid water path -->
+   <field id="CMIP6_maxpblz"       field_ref="dummy_XY"         /> <!-- P1 (m) atmosphere_boundary_layer_thickness : maximum boundary layer height during the day (add cell_methods attribute: "time: maximum") -->
+   <field id="CMIP6_meanage"       field_ref="dummy_XYA"        /> <!-- P1 (yr) age_of_stratospheric_air : The mean age of air is defined as the mean time that a stratospheric air mass has been out of contact with the well-mixed troposphere. -->
+   <field id="CMIP6_minpblz"       field_ref="dummy_XY"         /> <!-- P1 (m) atmosphere_boundary_layer_thickness : minimum boundary layer height during the day (add cell_methods attribute: "time: minimum") -->
+   <field id="CMIP6_mmraerh2o"     field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_water_in_ambient_aerosol_particles_in_air : Aerosol water mass mixing ratio -->
+   <field id="CMIP6_mmrbc"         field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_elemental_carbon_dry_aerosol_particles_in_air : Elemental carbon mass mixing ratio -->
+   <field id="CMIP6_mmrdust"       field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_dust_dry_aerosol_particles_in_air : Dust aerosol mass mixing ratio -->
+   <field id="CMIP6_mmrnh4"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_ammonium_dry_aerosol_particles_in_air : NH4 mass mixing ratio -->
+   <field id="CMIP6_mmrno3"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_nitrate_dry_aerosol_particles_in_air : NO3 aerosol mass mixing ratio -->
+   <field id="CMIP6_mmroa"         field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_particulate_organic_matter_dry_aerosol_particles_in_air : We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available. -->
+   <field id="CMIP6_mmrpm1"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_pm1_dry_aerosol_particles_in_air : E.g. mass_fraction_of_pm1_aerosol_at_50_percent_relative_humidity_in_air. proposed name:  mass_fraction_of_pm1_dry_aerosol_in_air -->
+   <field id="CMIP6_mmrpm10"       field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_pm10_ambient_aerosol_particles_in_air : E.g. mass_fraction_of_pm10_aerosol_at_50_percent_relative_humidity_in_air, proposed name: mass_fraction_of_pm10_dry_aerosol_in_air -->
+   <field id="CMIP6_mmrpm2p5"      field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_dry_aerosol_particles_in_air : E.g. mass_fraction_of_pm2p5_aerosol_at_50_percent_relative_humidity_in_air, proposed_name: mass_fraction_of_pm2p5_dry_aerosol_in_air -->
+   <field id="CMIP6_mmrso4"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_sulfate_dry_aerosol_particles_in_air : Aerosol sulfate mass mixing ratio -->
+   <field id="CMIP6_mmrsoa"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_secondary_particulate_organic_matter_dry_aerosol_particles_in_air : Secondary organic aerosol mass mixing ratio -->
+   <field id="CMIP6_mmrss"         field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_seasalt_dry_aerosol_particles_in_air : Sea Salt mass mixing ratio -->
+   <field id="CMIP6_nh50"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_artificial_tracer_with_fixed_lifetime_in_air : Fixed surface layer mixing ratio over 30o-50oN (100ppbv), uniform fixed 50-day exponential decay. -->
+   <field id="CMIP6_no"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_monoxide_in_air : NO volume mixing ratio -->
+   <field id="CMIP6_no2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 volume mixing ratio -->
+   <field id="CMIP6_noy"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_noy_expressed_as_nitrogen_in_air : Total family (the sum of all appropriate species in the model); list the species in the netCDF header, e.g. NOy = N + NO + NO2 + NO3 + HNO3 + 2N2O5 + HNO4 + ClONO2 + BrONO2 Definition: Total reactive nitrogen; usually includes atomic nitrogen (N), nitric oxide (NO), NO2, nitrogen trioxide (NO3), dinitrogen radical (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), BrONO2, ClONO2 add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_o3loss"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_destruction : ONLY provide the sum of the following reactions: (i) O(1D)+H2O; (ii) O3+HO2; (iii) O3+OH; (iv) O3+alkenes (isoprene, ethene,...) -->
+   <field id="CMIP6_o3prod"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_production : ONLY provide the sum of all the HO2/RO2 + NO reactions (as k*[HO2]*[NO]) -->
+   <field id="CMIP6_o3ste"         field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Ozone tracer intended to map out strat-trop exchange (STE) of ozone. -->
+   <field id="CMIP6_od440aer"      field_ref="od443aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 440 nm" -->
+   <field id="CMIP6_od550aer"      field_ref="od550aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 550 nm" -->
+   <field id="CMIP6_od550aerh2o"   field_ref="od550aer"   >  od550aer-dryod550aer   </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_water_in_ambient_aerosol : proposed name: atmosphere_optical_thickness_due_to_water_ambient_aerosol -->
+   <field id="CMIP6_od550bb"       field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : total organic aerosol AOD due to biomass burning (excluding so4, nitrate BB components) -->
+   <field id="CMIP6_od550bc"       field_ref="od550_ASBCM"  >  od550_ASBCM + od550_AIBCM   </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_black_carbon_ambient_aerosol : black carbon aod at 550nm -->
+   <field id="CMIP6_od550csaer"    field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols in clear skies if od550aer is for all-sky (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 550 nm" -->
+   <field id="CMIP6_od550dust"     field_ref="od550_CIDUSTM"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_dust_ambient_aerosol : Dust Optical Depth at 550nm -->
+   <field id="CMIP6_od550lt1aer"   field_ref="od550lt1aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_pm1_ambient_aerosol : od550 due to particles with wet diameter less than 1 um  (ambient here means wetted). When models do not include explicit size information, it can be assumed that all anthropogenic aerosols and natural secondary aerosols have diameter less than 1 um. -->
+   <field id="CMIP6_od550no3"      field_ref="od550_ASNO3M" >  od550_ASNO3M + od550_CSNO3M + od550_CINO3M   </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_nitrate_ambient_aerosol : proposed name: atmosphere_optical_thickness_due_to_nitrate_ambient_aerosol -->
+   <field id="CMIP6_od550oa"       field_ref="od550_ASPOMM"   >   od550_ASPOMM + od550_AIPOMM </field>   <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : Total Organic Aerosol Optical Depth at 550nm -->
+   <field id="CMIP6_od550so4"      field_ref="od550_ASSO4M"   >   od550_ASSO4M+od550_CSSO4M  </field>  <!-- P1 (1.0) atmosphere_optical_thickness_due_to_sulfate_ambient_aerosol : proposed name: atmosphere_optical_thickness_due_to_sulfate_ambient_aerosol -->
+   <field id="CMIP6_od550soa"      field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : total organic aerosol AOD due to secondary aerosol formation -->
+   <field id="CMIP6_od550ss"       field_ref="od550_ASSSM" >  od550_ASSSM+od550_CSSSM+od550_SSSSM    </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_seasalt_ambient_aerosol : Sea Salt Aersol Optical Depth at 550nm -->
+   <field id="CMIP6_od870aer"      field_ref="od865aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 870 nm" -->
+   <field id="CMIP6_oh"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydroxyl_radical_in_air : OH volume mixing ratio -->
+   <field id="CMIP6_pan"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_peroxyacetyl_nitrate_in_air : PAN volume mixing ratio -->
+   <field id="CMIP6_photo1d"       field_ref="dummy_XYA"        /> <!-- P1 (s-1) photolysis_rate_of_ozone_to_1D_oxygen_atom : proposed name: photolysis_rate_of_ozone_to_O1D -->
+   <field id="CMIP6_pod0"          field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) pending_CF_name : Accumulated stomatal ozone flux over the threshold of 0 mol m-2 s-1; Computation: Time Integral of (hourly above canopy ozone concentration * stomatal conductance * Rc/(Rb+Rc) ) -->
+   <field id="CMIP6_ptp"           field_ref="p_tropopause"         /> <!-- P1 (Pa) tropopause_air_pressure : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+   <field id="CMIP6_reffclwtop"    field_ref="reffclwtop"         /> <!-- P1 (m) effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_top : Droplets are liquid only.  This is the effective radius as seen from space over liquid cloudy portion of grid cell. This is the value from uppermost model layer with liquid cloud or, if available, or for some models it is the sum over all liquid cloud tops, no matter where they occur, as long as they are seen from the top of the atmosphere.TOA) each time sample when computing monthly mean. Reported values are weighted by total liquid cloud top fraction of  (as seen from -->
+   <field id="CMIP6_rlutaf"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : Flux corresponding to rlut resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rlutcsaf"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : Flux corresponding to rlutcs resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rsutaf"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : Flux corresponding to rsut resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rsutcsaf"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : Flux corresponding to rsutcs resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_sedustCI"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_sedimentation : Balkanski - LSCE -->
+   <field id="CMIP6_sfno2"         field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfo3"          field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : O3 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfo3max"       field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Daily maximum O3 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfpm25"        field_ref="dummy_XY"         /> <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_ambient_aerosol_particles_in_air : PM2.5 mass mixing ratio in lowest model layer -->
+   <field id="CMIP6_so2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_sulfur_dioxide_in_air : SO2 volume mixing ratio -->
+   <field id="CMIP6_tatp"          field_ref="t_tropopause"         /> <!-- P1 (K) tropopause_air_temperature : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+   <field id="CMIP6_tntrl"         field_ref="dummy_XYA"        /> <!-- P3 (K s-1) tendency_of_air_temperature_due_to_longwave_heating : Tendency of air temperature due to longwave radiative heating -->
+   <field id="CMIP6_tntrs"         field_ref="dummy_XYA"        /> <!-- P3 (K s-1) tendency_of_air_temperature_due_to_shortwave_heating : Tendency of air temperature due to shortwave radiative heating -->
+   <field id="CMIP6_toz"           field_ref="dummy_XY"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Total ozone column calculated at 0 degrees C and 1 bar, such that 1m = 1e5 DU. -->
+   <field id="CMIP6_tropoz"        field_ref="dummy_XY"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Tropospheric ozone column, should be consistent with definition of tropopause used to calculate the pressure of the tropopause (ptp). Calculated at 0 degrees C and 1 bar, such that 1m = 1e5 DU. -->
+   <field id="CMIP6_ttop"          field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature_at_cloud_top : air temperature at cloud top -->
+   <field id="CMIP6_wa"            field_ref="dummy_XYA"        /> <!-- P1 (m s-1) upward_air_velocity : Upward Air Velocity -->
+   <field id="CMIP6_wetbc"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of black carbon aerosol mass -->
+   <field id="CMIP6_wetdust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of dust -->
+   <field id="CMIP6_wetnh3"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_wet_deposition : wet deposition rate of nh3 -->
+   <field id="CMIP6_wetnh4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of nh4 -->
+   <field id="CMIP6_wetnoy"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_wet_deposition : NOy is the sum of all simulated oxidized nitrogen species, out of NO, NO2, HNO3, HNO4, NO3aerosol, NO3(radical), N2O5, PAN, other organic nitrates. -->
+   <field id="CMIP6_wetoa"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_wet_deposition : tendency of atmosphere mass content of organic matter dry aerosols due to wet deposition: This is the sum of wet deposition of POA and wet deposition of SOA (see next two entries). Mass here refers to the mass of organic matter, not mass of organic carbon alone. We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available. Was called wet_pom in old ACCMIP Excel spreadsheet. -->
+   <field id="CMIP6_wetso2"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_wet_deposition : wet deposition rate of so2 -->
+   <field id="CMIP6_wetso4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_wet_deposition : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_wet_deposition -->
+   <field id="CMIP6_wetss"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of seasalt -->
+   <field id="CMIP6_ztp"           field_ref="z_tropopause"         /> <!-- P1 (m) tropopause_altitude : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+
+
+<!-- for variables which realm equals one of _atmosChem-->
+   <field id="CMIP6_flashrate"     field_ref="dummy_XY"         /> <!-- P1 (km-2 s-1) lightning_flash_rate : proposed name: lightning_flash_rate (units to be interpreted as "counts km-2 s-1) -->
+   <field id="CMIP6_oxloss"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom_due_to_chemical_destruction : total chemical loss rate for o+o1d+o3 -->
+   <field id="CMIP6_oxprod"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom_due_to_chemical_production_and_photolysis : total production rate of o+o1d+o3 including o2 photolysis and all o3 producing reactions -->
+   <field id="CMIP6_vmrox"         field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom : Mole Fraction of Ox -->
+
+
+<!-- for variables which realm equals one of _landIce-->
+   <field id="CMIP6_acabf"         field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_surface_specific_mass_balance_flux : quantity averaged over ice sheet only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_acabfIs"       field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_surface_specific_mass_balance_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_agesno"        field_ref="dummy_XY"         /> <!-- P1 (day) age_of_surface_snow : When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.  Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_hfdsn"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_heat_flux_in_snow : the net downward heat flux from the atmosphere into the snow that lies on land divided by the land area in the grid cell; reported as missing for snow-free land regions or where the land fraction is 0. -->
+   <field id="CMIP6_hfgeoubed"     field_ref="dummy_XY"         /> <!-- P3 (W m-2) upward_geothermal_heat_flux_at_ground_level_in_land_ice : Geothermal Heat flux beneath land ice -->
+   <field id="CMIP6_hfgeoubed_ist" field_ref="dummy_XY"         /> <!-- P3 (W m-2) upward_geothermal_heat_flux_at_ground_level_in_land_ice : Geothermal Heat flux beneath land ice -->
+   <field id="CMIP6_hflsIs"        field_ref="lat_lic" > -1.0 * lat_lic </field> <!-- P1 (W m-2) surface_upward_latent_heat_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_hfssIs"        field_ref="sens_lic" > -1.0 * sens_lic </field> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_icem"          field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_surface_melt_flux : Surface ice melt flux -->
+   <field id="CMIP6_icemIs"        field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_surface_melt_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_libmassbffl"   field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_basal_specific_mass_balance_flux : quantity averaged over floating ice shelf -->
+   <field id="CMIP6_libmassbfgr"   field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_basal_specific_mass_balance_flux : quantity averaged over grounded ice sheet -->
+   <field id="CMIP6_licalvf"       field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_specific_mass_flux_due_to_calving : Land ice calving flux -->
+   <field id="CMIP6_lifmassbf"     field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_specific_mass_flux_due_to_calving_and_ice_front_melting : Land ice vertical front mass balance flux -->
+   <field id="CMIP6_litempbotfl"   field_ref="dummy_XY"         /> <!-- P2 (K) land_ice_basal_temperature : quantity averaged over floating land ice -->
+   <field id="CMIP6_litempbotgr"   field_ref="dummy_XY"         /> <!-- P2 (K) land_ice_basal_temperature : quantity averaged over grounded land ice -->
+   <field id="CMIP6_litemptop"     field_ref="dummy_XY"         /> <!-- P2 (K) temperature_at_top_of_ice_sheet_model : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_litemptopIs"   field_ref="dummy_XY"         /> <!-- P2 (K) temperature_at_top_of_ice_sheet_model : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_lithk_ist"     field_ref="dummy_XY"         /> <!-- P2 (m) land_ice_thickness : This is needed in case ice sheet thickness changes in time -->
+   <field id="CMIP6_lwsnl"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_snow_layer : where land over land: this is computed as the total mass of liquid water contained interstitially within the snow layer of the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_modelCellAreai" field_ref="dummy_XY"         /> <!-- P1 (m2) cell_area : When interpolated to a regular grid, it should be interpolated (not summed) with a conservative scheme to preserve total area -->
+   <field id="CMIP6_mrfso"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2) soil_frozen_water_content : the mass (summed over all all layers) of frozen water. -->
+   <field id="CMIP6_mrroIs"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) runoff_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_orogIs"        field_ref="phis" > phis / 9.81  </field>  <!-- P1 (m) surface_altitude : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_pflw"          field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_permafrost_layer : "where land over land", i.e., this is the total mass of liquid water contained within the permafrost layer within the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_prraIs"        field_ref="rain_fall" /> <!-- P1 (kg m-2 s-1) rainfall_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_prsnIs"        field_ref="snow"         /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rldsIs"        field_ref="LWdnSFC"     /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rlusIs"        field_ref="LWdnSFC" > pourc_lic &gt; 0 ? (LWdnSFC - flw_lic) : $missing_value </field>  <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rsdsIs"        field_ref="SWdnSFC"   /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rsusIs"        field_ref="SWdnSFC" > pourc_lic &gt; 0 ? (SWdnSFC - fsw_lic) : $missing_value </field>  <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sbl"           field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : The snow and ice sublimation flux is the loss of snow and ice mass from the surface resulting from their conversion to water vapor that enters the atmosphere. -->
+   <field id="CMIP6_sbl_land"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : surface_snow_and_ice_sublimation_flux -->
+   <field id="CMIP6_sbl_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : Surface Snow and Ice Sublimation Flux -->
+   <field id="CMIP6_sblIs"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sftflf"        field_ref="dummy_XY"       /> <!-- P2 (%) floating_ice_shelf_area_fraction : This is needed to distinguish between grounded glaciated ice (grounded = ice sheet and glacier) and ice shelves (floating over sea water), since land_ice is by definition ice sheet, glacier and ice shelves -->
+   <field id="CMIP6_sftgrf"        field_ref="pourc_lic"         /> <!-- P1 (%) grounded_ice_sheet_area_fraction : This is needed in case the grounded ice sheet area changes in time (NO floating ice shelf) -->
+   <field id="CMIP6_snc"           field_ref="fsnow" > fsnow * 100.  </field> <!-- P1 (%) surface_snow_area_fraction : Fraction of each grid cell that is occupied by snow that rests on land portion of cell. -->
+   <field id="CMIP6_snc_ist"       field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice sheet  only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sncIs"         field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snd"           field_ref="dummy_XY"         /> <!-- P1 (m) surface_snow_thickness : where land over land, this is computed as the mean thickness of snow in the land portion of the grid cell (averaging over the entire land portion, including the snow-free fraction).  Reported as missing where the land fraction is 0. -->
+   <field id="CMIP6_snicefreez"    field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : Surface snow and ice refreeze flux -->
+   <field id="CMIP6_snicefreezIs"  field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snicem"        field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_melt_flux : Surface snow and ice melt flux -->
+   <field id="CMIP6_snicemIs"      field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_melt_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snm_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Surface Snow Melt -->
+   <field id="CMIP6_snm_land"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Computed as the total surface melt water on the land portion of the grid cell divided by the land area in the grid cell; report as 0.0 for snow-free land regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_snmIs"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Loss of snow mass resulting from surface melting. Computed as the surface melt water from snow on the ice sheet portion of the grid cell divided by the ice_sheet area in the grid cell; report as 0.0 for snow-free land_ice regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_sootsn"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2) soot_content_of_surface_snow : the entire land portion of the grid cell is considered, with snow soot content set to 0.0 in regions free of snow. -->
+   <field id="CMIP6_strbasemag"    field_ref="dummy_XY"         /> <!-- P3 (Pa) magnitude_of_basal_drag_at_land_ice_base : Land Ice Basal Drag -->
+   <field id="CMIP6_tasIs"         field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_topg"          field_ref="dummy_XY"         /> <!-- P2 (m) bedrock_altitude : Bedrock Altitude -->
+   <field id="CMIP6_topg_ist"      field_ref="dummy_XY"         /> <!-- P2 (m) bedrock_altitude : This is needed in case bed rock elevation changes in time -->
+   <field id="CMIP6_tpf"           field_ref="dummy_XY"         /> <!-- P1 (m) permafrost_layer_thickness : where land over land: This is the mean thickness of the permafrost layer in the land portion of the grid cell.  Reported as missing in permafrost-free regions. -->
+   <field id="CMIP6_tsIs"          field_ref="tsol_lic" > pourc_lic &gt; 0 ? tsol_lic : $missing_value </field>  <!-- P1 (K) surface_temperature : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : This temperature is averaged over all the snow in the grid cell that rests on land or land ice.  When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.   Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_tsnIs"         field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_xvelbase"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_basal_x_velocity : X-component of land ice basal velocity -->
+   <field id="CMIP6_xvelmean"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_vertical_mean_x_velocity : X-component of land ice vertical mean velocity -->
+   <field id="CMIP6_xvelsurf"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_surface_x_velocity : X-component of land ice surface velocity -->
+   <field id="CMIP6_yvelbase"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_basal_y_velocity : Y-component of land ice basal velocity -->
+   <field id="CMIP6_yvelmean"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_vertical_mean_y_velocity : Y-component of land ice vertical mean velocity -->
+   <field id="CMIP6_yvelsurf"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_surface_y_velocity : Y-component of land ice surface velocity -->
+   <field id="CMIP6_zvelbase"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_basal_upward_velocity : Upward-component of land ice basal velocity -->
+   <field id="CMIP6_zvelsurf"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_surface_upward_velocity : Upward component of land ice surface velocity -->
+</field_definition>
+</context>
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/ping_orchidee.xml
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/ping_orchidee.xml	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/ping_orchidee.xml	(revision 5176)
@@ -0,0 +1,339 @@
+<!-- ==================================================================================================================== -->
+<!-- CMIP6_ping_land.xml                                                                                                  -->
+<!-- This file is not used while running the model. It is only here for preparing output for CMIP6 simulations.           -->
+<!-- This file contains all output variables in the data request for CMIP6 concerning ORCHIDEE.                           -->
+<!-- field id should not be changed. It is used by the tool dr2xml to produce specific file_def.xml files for CMIP6.      -->
+<!-- field_ref corresponds to field id in field_def_orchidee.xml.                                                         -->
+<!-- field_ref="dummy" means that the corresponding output variable in ORCHIDEE has not yet been identified or coded.     -->
+<!--                                                                                                                      -->
+<!-- $HeadURL: svn://forge.ipsl.jussieu.fr/orchidee/tags/ORCHIDEE_2_0/ORCHIDEE/src_xml/CMIP6_ping_land.xml $              -->
+<!-- $Date: 2018-11-27 12:15:46 +0100 (Tue, 27 Nov 2018) $                                                               -->
+<!-- $Revision: 5625 $                                                                                                    -->
+<!-- ==================================================================================================================== -->
+
+<!-- Ping files generated by dr2xml 1.16 using Data Request 01.00.28 -->
+<!-- Note that comments are not updated since ping files were generated by dr2xml 0.27 using Data Request 01.00.21 -->
+<!-- lrealms= ['land'] -->
+<!-- exact= False -->
+<!--  listof_home_vars : None
+ tierMax : 3
+ realms_per_context : {'lmdz': ['atmos', 'atmos land'], 'nemo': ['seaIce', 'ocean', 'ocean seaIce', 'ocnBgchem', 'seaIce ocean'], 'orchidee': ['land', 'landIce land', 'land landIce', 'landIce']}
+ max_priority : 3
+ max_file_size_in_floats : 20000000000.0
+ grid_choice : {'IPSL-CM6A-LR': 'LR'}
+ excluded_vars_file : None
+ sizes : {'LR': [20592, 79, 32768, 91, 30, 14, 128]}
+ ping_variables_prefix : CMIP6_
+ source_types : {'IPSL-CM6A-LR': 'AOGCM AER BGC'}
+ path_extra_tables : None
+ grid_policy : native
+ path_special_defs : None
+ mips : {'LR': set(['CDRMIP', 'CORDEX', 'GMMIP', 'RFMIP', 'VolMIP', 'CMIP6', 'ScenarioMIP', 'GeoMIP', 'C4MIP', 'PDRMIP', 'CMIP', 'DECK', 'LUMIP', 'CMIP5', 'CFMIP', 'OMIP', 'DAMIP', 'CCMI', 'SolarMIP', 'VIACSAB', 'SIMIP', 'DCPP', 'ISMIP6', 'AerChemMIP', 'PMIP', 'FAFMIP', 'DynVar', 'LS3MIP', 'SPECS', 'HighResMIP'])}
+ excluded_vars : []
+ orphan_variables : {}
+--> 
+
+<context id="orchidee">
+<field_definition>
+<!-- for variables which realm equals one of _land-->
+   <field id="CMIP6_agesno"        field_ref="snowage_glob"         /> <!-- P1 (day) age_of_surface_snow : age_of_surface_snow -->
+   <field id="CMIP6_agesno"        field_ref="snowage_glob"         /> <!-- P1 (day) age_of_surface_snow : When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.  Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_albc"          field_ref="vegalb_glob"         /> <!-- P1 (1) canopy_albedo : Canopy Albedo -->
+   <field id="CMIP6_albsn"         field_ref="albedo_snow"         /> <!-- P1 (1) snow_and_ice_albedo : Snow Albedo -->
+   <field id="CMIP6_areacella"     field_ref="areas"         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report atmospheric variables and any other variable using that grid (e.g., soil moisture content). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_areacellg"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m2) cell_area : Cell areas any grid used to report ice sheet variables. These cell areas should be defined to enable exact calculation of area integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere) -->
+   <field id="CMIP6_areacellr"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report river model variables (may be the same as for atmospheric variables). These cell areas should be defined to enable exact calculation of area integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_ares"          field_ref="raero"         /> <!-- P1 (s m-1) aerodynamic_resistance : aerodynamic_resistance -->
+   <field id="CMIP6_baresoilFrac"  field_ref="baresoilFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by bare soil. Warning: we do not include the bare soil fraction from the vegetated pft's. Note: Multiplied in sechiba by contfrac because we need entire grid-cell -->
+   <field id="CMIP6_burntFractionAll" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : Percentage of grid cell burned due to all fires including natural and anthropogenic fires and those associated with anthropogenic land use change -->
+   <field id="CMIP6_c13Land"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) total_land_c13 : Mass of 13C in all terrestrial carbon pools -->
+   <field id="CMIP6_c13Litter"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_c13_content : Mass of 13C in Litter Pool -->
+   <field id="CMIP6_c13Soil"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_c13_content : Mass of 13C in Soil Pool -->
+   <field id="CMIP6_c13Veg"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_c13_content : Mass of 13C in Vegetation -->
+   <field id="CMIP6_c14Land"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) total_land_c14 : Mass of 14C in all terrestrial carbon pools -->
+   <field id="CMIP6_c14Litter"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_c14_content : Mass of 14C in Litter Pool -->
+   <field id="CMIP6_c14Soil"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_c14_content : Mass of 14C in Soil Pool -->
+   <field id="CMIP6_c14Veg"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_c14_content : only requested for DECK HIST -->
+   <field id="CMIP6_c3PftFrac"     field_ref="c3PftFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by C3 PFTs (including grass, crops, and trees). -->
+   <field id="CMIP6_c4PftFrac"     field_ref="c4PftFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by C4 PFTs (including grass and crops). -->
+   <field id="CMIP6_cCwd"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) wood_debris_carbon_content : Carbon Mass in Coarse Woody Debris -->
+   <field id="CMIP6_cLand"         field_ref="cLand"         /> <!-- P1 (kg m-2) total_land_carbon : Total Carbon in All Terrestrial Carbon Pools -->
+   <field id="CMIP6_cLeaf"         field_ref="cLeaf"         /> <!-- P1 (kg m-2) leaf_carbon_content : Carbon Mass in Leaves -->
+   <field id="CMIP6_cLitter"       field_ref="cLitter"         /> <!-- P1 (kg m-2) litter_carbon_content : Carbon Mass in Litter Pool -->
+   <field id="CMIP6_cLitterAbove"  field_ref="cLitterAbove"         /> <!-- P1 (kg m-2) surface_litter_carbon_content : Carbon Mass in Above-Ground Litter -->
+   <field id="CMIP6_cLitterBelow"  field_ref="cLitterBelow"         /> <!-- P1 (kg m-2) subsurface_litter_carbon_content : Carbon Mass in Below-Ground Litter -->
+   <field id="CMIP6_cLitterCwd"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_wood_debris_carbon_content : Carbon Mass in Coarse Woody Debris -->
+   <field id="CMIP6_cLitterGrass"  field_ref="cLitterGrass"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on grass tiles -->
+   <field id="CMIP6_cLitterLut"    field_ref="clitterlut" /> <!-- P1 (kg m-2) litter_carbon_content : carbon  in above and belowground litter pools on land use tiles -->
+   <field id="CMIP6_cLitterShrub"  field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on shrub tiles -->
+   <field id="CMIP6_cLitterSubSurf" field_ref="cLitterBelow"         /> <!-- P2 (kg m-2) subsurface_litter_carbon_content : Carbon Mass in Below-Ground Litter Warning: Duplicate of CMIP6_cLitterBelow -->
+   <field id="CMIP6_cLitterSurf"   field_ref="cLitterAbove"         /> <!-- P2 (kg m-2) surface_litter_carbon_content : Carbon Mass in Above-Ground Litter Warning: Duplicate of CMIP6_cLitterAbove -->
+   <field id="CMIP6_cLitterTree"   field_ref="cLitterTree"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on tree tiles -->
+   <field id="CMIP6_cMisc"         field_ref="cMisc"         /> <!-- P2 (kg m-2) miscellaneous_living_matter_carbon_content : Carbon Mass in Other Living Compartments on Land -->
+   <field id="CMIP6_cOther"        field_ref="cOther"         /> <!-- P2 (kg m-2) other_vegegtation_components_carbon_content : Carbon Mass in Vegetation Components other than Leaves, Stems and Roots -->
+   <field id="CMIP6_cProduct"      field_ref="cProduct"         /> <!-- P1 (kg m-2) carbon_content_of_products_of_anthropogenic_land_use_change : Carbon Mass in Products of Land Use Change -->
+   <field id="CMIP6_cProductLut"   field_ref="cproductlut" /> <!-- P1 (kg m-2) carbon_content_in_wood_and_agricultural_products : wood and agricultural product pool carbon associated with land use tiles; examples of products include paper, cardboard, timber for construction, and crop harvest for food or fuel. -->
+   <field id="CMIP6_cRoot"         field_ref="cRoot"         /> <!-- P1 (kg m-2) root_carbon_content : including fine and coarse roots. -->
+   <field id="CMIP6_cSoil"         field_ref="cSoil"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon Mass in Soil Pool -->
+   <field id="CMIP6_cSoilAbove1m"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon mass in soil pool above 1m depth -->
+   <field id="CMIP6_cSoilFast"     field_ref="cSoilFast"         /> <!-- P1 (kg m-2) fast_soil_pool_carbon_content : fast is meant as lifetime of less than 10 years for  reference climate conditions (20 C, no water limitations). -->
+   <field id="CMIP6_cSoilGrass"    field_ref="cSoilGrass"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on grass tiles -->
+   <field id="CMIP6_cSoilLevels"   field_ref="dummy_XYSo_not_provided"       /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in each model soil level (summed over all soil carbon pools in that level) -->
+   <field id="CMIP6_cSoilLut"      field_ref="csoillut" /> <!-- P1 (kg m-2) soil_carbon_content : carbon  in soil pool on land use tiles -->
+   <field id="CMIP6_cSoilMedium"   field_ref="cSoilMedium"         /> <!-- P1 (kg m-2) medium_soil_pool_carbon_content : medium is meant as lifetime of more than than 10 years and less than 100 years for  reference climate conditions (20 C, no water limitations) -->
+   <field id="CMIP6_cSoilPools"    field_ref="cSoilPools"/> <!-- P2 (kg m-2) soil_carbon_content_by_pool : Carbon mass in each model soil pool (summed over vertical levels) -->
+   <field id="CMIP6_cSoilShrub"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on shrub tiles -->
+   <field id="CMIP6_cSoilSlow"     field_ref="cSoilSlow"         /> <!-- P1 (kg m-2) slow_soil_pool_carbon_content : fast is meant as lifetime of more than 100 years for  reference climate conditions (20 C, no water limitations) -->
+   <field id="CMIP6_cSoilTree"     field_ref="cSoilTree"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on tree tiles -->
+   <field id="CMIP6_cStem"         field_ref="cStem"         /> <!-- P2 (kg m-2) stem_carbon_content : Carbon Mass in Stem -->
+   <field id="CMIP6_cTotFireLut"   field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (kg m-2 s-1)  : Total carbon loss from natural and managed fire on land use tile, including deforestation fires -->
+   <field id="CMIP6_cVeg"          field_ref="cVeg"         /> <!-- P1 (kg m-2) vegetation_carbon_content : Carbon Mass in Vegetation -->
+   <field id="CMIP6_cVegGrass"     field_ref="cVegGrass"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on grass tiles -->
+   <field id="CMIP6_cVegLut"       field_ref="cveglut" /> <!-- P1 (kg m-2) vegetation_carbon_content : carbon in vegetation on land use tiles -->
+   <field id="CMIP6_cVegShrub"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on shrub tiles -->
+   <field id="CMIP6_cVegTree"      field_ref="cVegTree"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on tree tiles -->
+   <field id="CMIP6_cWood"         field_ref="cWood"         /> <!-- P2 (kg m-2) wood_carbon_content : Carbon Mass in Wood -->
+   <field id="CMIP6_clayfrac"      field_ref="clayfraction"       /> <!-- P1 (1) volume_fraction_of_clay_in_soil : Clay Fraction -->
+   <field id="CMIP6_cnc"           field_ref="cnc"         /> <!-- P1 (%) vegetation_area_fraction : Canopy covered fraction Warning: fraction over total land -->
+   <field id="CMIP6_cropFrac"      field_ref="cropFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by crop. Warning: Note: Multiplied in sechiba by contfrac because we need entire grid-cell -->
+   <field id="CMIP6_cropFracC3"    field_ref="cropFracC3"         /> <!-- P1 (%) area_fraction : Percentage Cover by C3 Crops -->
+   <field id="CMIP6_cropFracC4"    field_ref="cropFracC4"         /> <!-- P1 (%) area_fraction : Percentage Cover by C4 Crops -->
+   <field id="CMIP6_cw"            field_ref="qsintveg_tot"         /> <!-- P1 (kg m-2) canopy_water_amount : canopy_water_amount -->
+   <field id="CMIP6_dcw"           field_ref="delintercept"         /> <!-- P1 (kg m-2) change_over_time_in_canopy_water_amount : change_over_time_in_canopy_water_amount -->
+   <field id="CMIP6_dgw"           field_ref="delslowr"         /> <!-- P1 (kg m-2) change_over_time_in_groundwater : change_over_time_in_groundwater Warning: It can be either undef or delslowr. We take the second option for the moment. -->
+   <field id="CMIP6_dmlt"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_subsurface_melting : depth_of_subsurface_melting -->
+   <field id="CMIP6_drivw"         field_ref="delriv"         /> <!-- P1 (kg m-2) change_over_time_in_river_water_amount : change_over_time_in_river_water_amount Warning: we sum the stream and fast reservoir of the routing scheme. -->
+   <field id="CMIP6_dslw"          field_ref="delsoilmoist"         /> <!-- P1 (kg m-2) change_over_time_in_water_content_of_soil_layer : change_over_time_in_water_content_of_soil_layer -->
+   <field id="CMIP6_dsn"           field_ref="delswe"         /> <!-- P1 (kg m-2) change_over_time_in_surface_snow_and_ice_amount : change_over_time_in_surface_snow_and_ice_amount -->
+   <field id="CMIP6_dsw"           field_ref="delsurfwater"         /> <!-- P1 (kg m-2) change_over_time_in_surface_water_amount : change_over_time_in_surface_water_amount Warning: includes the fast reservoire -->
+   <field id="CMIP6_dtes"          field_ref="dtes"         /> <!-- P1 (J m-2) change_over_time_in_thermal_energy_content_of_surface : Change in surface heat storage -->
+   <field id="CMIP6_dtesn"         field_ref="del_snowheattot"         /> <!-- P1 (J m-2) change_over_time_in_thermal_energy_content_of_surface_snow_and_ice : Change in snow/ice cold content Warning: Computed only for the layered scheme on vegetated and bare soil area -->
+   <field id="CMIP6_ec"            field_ref="evspsblveg"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_canopy : liquid_water_evaporation_flux_from_canopy -->
+   <field id="CMIP6_eow"           field_ref="vevapflo"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_open_water : liquid_water_evaporation_flux_from_open_water -->
+   <field id="CMIP6_es"            field_ref="vevapnu"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_soil : liquid_water_evaporation_flux_from_soil -->
+   <field id="CMIP6_esn"           field_ref="vevapsno"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_surface_snow : liquid_water_evaporation_flux_from_surface_snow -->
+   <field id="CMIP6_evspsbl"       field_ref="vevapp"         /> <!-- P1 (kg m-2 s-1) surface_evapotranspiration : surface_evapotranspiration -->
+   <field id="CMIP6_evspsblpot"    field_ref="evapot"         /> <!-- P1 (kg m-2 s-1) water_potential_evaporation_flux : Potential Evapotranspiration -->
+   <field id="CMIP6_evspsblsoi"    field_ref="evspsblsoi"         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux_from_soil : includes sublimation. -->
+   <field id="CMIP6_evspsblveg"    field_ref="evspsblveg"         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux_from_canopy : the canopy evaporation+sublimation (if present in model). Warning: No sublimation here for Orchidee -->
+   <field id="CMIP6_fAnthDisturb"  field_ref="fAnthDisturb"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_anthrogpogenic_emission : carbon mass flux into atmosphere due to any human activity -->
+   <field id="CMIP6_fBNF"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) biological_nitrogen_fixation : biological nitrogen fixation -->
+   <field id="CMIP6_fCLandToOcean" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_ocean_from_rivers : Lateral transfer of carbon out of gridcell that eventually goes into ocean -->
+   <field id="CMIP6_fDeforestToAtmos" field_ref="fLuc"         /> <!-- P2 (kg m-2 s-1) surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change : Deforested biomass that goes into atmosphere as a result of anthropogenic land use change Warning : duplicate of variable fLuc -->
+   <field id="CMIP6_fDeforestToProduct" field_ref="fDeforestToProduct"         /> <!-- P1 (kg m-2 s-1) deforested_biomass_into_product_pool_due_to_anthorpogenic_land_use_change : Deforested biomass that goes into product pool as a result of anthropogenic land use change -->
+   <field id="CMIP6_fFire"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fires_excluding_anthropogenic_land_use_change : CO2 emissions (expressed as a carbon mass flux) from natural fires + human ignition fires as calculated by the fire module of the DGVM, but excluding any CO2 flux from fire included in fLuc, defined below (CO2 Flux to Atmosphere from Land Use Change). -->
+   <field id="CMIP6_fFireAll"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_all_sources : Carbon Mass Flux into Atmosphere due to CO2 emissions from Fire resulting from all sources including natural, anthropogenic and land use change. -->
+   <field id="CMIP6_fFireNat"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) fire_CO2_emissions_from_wildfire : Carbon Mass Flux into Atmosphere due to CO2 Emission from natural Fire -->
+   <field id="CMIP6_fGrazing"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_grazing : Carbon Mass Flux into Atmosphere due to Grazing on Land -->
+   <field id="CMIP6_fHarvest"      field_ref="fHarvest"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting : Carbon Mass Flux into Atmosphere due to Crop Harvesting -->
+   <field id="CMIP6_fHarvestToAtmos" field_ref="fHarvest"         /> <!-- P2 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting : Harvested biomass that goes straight into atmosphere Warning : Duplicate variable fHarvest -->
+   <field id="CMIP6_fHarvestToProduct" field_ref="fHarvestToProduct"         /> <!-- P1 (kg m-2 s-1) harvested_biomass_into_product_pool : Harvested biomass that goes into product pool -->
+   <field id="CMIP6_fLitterFire"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_litter_carbon : Carbon Mass Flux from Litter, CWD or any non-living pool into Atmosphere due to CO2 Emission from all Fire -->
+   <field id="CMIP6_fLitterSoil"   field_ref="fLitterSoil"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_from_litter : Total Carbon Mass Flux from Litter to Soil -->
+   <field id="CMIP6_fLuc"          field_ref="fLuc"         /> <!-- P1 (kg m-2 s-1) surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change : Net Carbon Mass Flux into Atmosphere due to Land Use Change -->
+   <field id="CMIP6_fLulccAtmLut"  field_ref="flulccatmlut" /> <!-- P1 (kg s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_direct_to_atmosphere_due_to_anthropogenic_land_use_land_cover_change : carbon transferred directly to atmosphere due to any land-use or land-cover change activities including deforestation or agricultural fire -->
+   <field id="CMIP6_fLulccProductLut" field_ref="flulccproductlut" /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_wood_and_agricultural_product_pools_due_to_anthropogenic_land_use_or_land_cover_change : carbon harvested due to land-use or land-cover change process that enters anthropogenic product pools on tile -->
+   <field id="CMIP6_fLulccResidueLut" field_ref="flulccresiduelut" /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_and_litter_due_to_anthropogenic_land_use_or_land_cover_change : carbon transferred to soil or litter pools due to land-use or land-cover change processes on tile -->
+   <field id="CMIP6_fN2O"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_net_n2o_flux : Total land N2O flux -->
+   <field id="CMIP6_fNAnthDisturb" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_flux_into_atmos_due_to_direct_human_disturbance : nitrogen mass flux out of land due to any human activity -->
+   <field id="CMIP6_fNLandToOcean" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_ocean_from_rivers : Lateral transfer of nitrogen out of gridcell that eventually goes into ocean -->
+   <field id="CMIP6_fNLitterSoil"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_soil_from_litter : Total Nitrogen Mass Flux from Litter to Soil -->
+   <field id="CMIP6_fNOx"          field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_net_nox_flux : Total land NOx flux -->
+   <field id="CMIP6_fNProduct"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_to_product_pool_due_to_anthorpogenic_activity : Deforested or harvested biomass as a result of anthropogenic land use or change -->
+   <field id="CMIP6_fNVegLitter"   field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) litter_nitrogen_flux : Total Nitrogen Mass Flux from Vegetation to Litter -->
+   <field id="CMIP6_fNVegSoil"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_soil_from_vegetation_excluding_litter : Total Nitrogen Mass Flux from Vegetation Directly to Soil -->
+   <field id="CMIP6_fNdep"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) deposition_of_nitrogen_onto_land : Dry and Wet Deposition of Reactive Nitrogen onto Land -->
+   <field id="CMIP6_fNfert"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) fertiliser_of_nitrogen_onto_land : total N added for cropland fertilisation (artificial and manure) -->
+   <field id="CMIP6_fNgas"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere : Total Nitrogen lost to the atmosphere (sum of NHx, NOx, N2O, N2) -->
+   <field id="CMIP6_fNgasFire"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere_due_to_fire : Total N lost to the atmosphere (including NHx, NOx, N2O, N2) from fire. -->
+   <field id="CMIP6_fNgasNonFire"  field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere_not_due_to_fire : Total N lost to the atmosphere (including NHx, NOx, N2O, N2) from all processes except fire. -->
+   <field id="CMIP6_fNleach"       field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost_to_leaching : Total N loss to leaching or runoff (sum of ammonium, nitrite and nitrate) -->
+   <field id="CMIP6_fNloss"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost : Total N lost (including NHx, NOx, N2O, N2 and leaching) -->
+   <field id="CMIP6_fNnetmin"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) net_nitrogen_mineralisation : Net nitrogen release from soil and litter as the outcome of nitrogen immobilisation and gross mineralisation -->
+   <field id="CMIP6_fNup"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) plant_nitrogen_uptake : total plant nitrogen uptake (sum of ammonium and nitrate), irrespective of the source of nitrogen -->
+   <field id="CMIP6_fProductDecomp" field_ref="fProductDecomp"         /> <!-- P1 (kg m-2 s-1) Carbon_flux_out_of_storage_product_pools_into_atmos : decomposition out of product pools to CO2 in atmos Warning Duplicated variable with fDeforestToProduct -->
+   <field id="CMIP6_fProductDecompLut" field_ref="flulccatmlut" /> <!-- P1 (kg s-1) tendency_of_atmospheric_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_wood_and_agricultural_product_pool : flux from wood and agricultural product pools on land use tile into atmosphere -->
+   <field id="CMIP6_fVegFire"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_vegetation_carbon : Carbon Mass Flux from Vegetation into Atmosphere due to CO2 Emission from all Fire -->
+   <field id="CMIP6_fVegLitter"    field_ref="fVegLitter"         /> <!-- P1 (kg m-2 s-1) litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter -->
+   <field id="CMIP6_fVegLitterMortality" field_ref="dummy_XY_not_provided"   /> <!-- P2 (kg m-2 s-1) mortality_litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter as a Result of Mortality -->
+   <field id="CMIP6_fVegLitterSenescence" field_ref="dummy_XY_not_provided"  /> <!-- P2 (kg m-2 s-1) senescence_litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter as a Result of Leaf, Branch, and Root Senescence -->
+   <field id="CMIP6_fVegSoil"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_from_vegetation_excluding_litter : In some models part of carbon (e.g., root exudate) can go directly into the soil pool without entering litter. -->
+   <field id="CMIP6_fVegSoilMortality" field_ref="dummy_XY_not_provided"     /> <!-- P2 (kg m-2 s-1) mortality_vegtosoil_carbon_flux : Total Carbon Mass Flux from Vegetation to Soil as a result of mortality -->
+   <field id="CMIP6_fVegSoilSenescence" field_ref="dummy_XY_not_provided"    /> <!-- P2 (kg m-2 s-1) senescence_vegtosoil_carbon_flux : Total Carbon Mass Flux from Vegetation to Soil as a result of leaf, branch, and root senescence -->
+   <field id="CMIP6_fahLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_heat_flux_due_to_anthropogenic_energy_consumption : Anthropogenic heat flux generated from non-renewable human primary energy consumption, including energy use by vehicles, commercial and residential buildings, industry, and power plants.  Primary energy refers to energy in natural resources, fossil and nonfossil, before conversion into other forms, such as electricity. -->
+   <field id="CMIP6_fldcapacity"   field_ref="fldcapacity"       /> <!-- P1 (%) volume_fraction_of_condensed_water_in_soil_at_field_capacity : Field Capacity -->
+   <field id="CMIP6_fracInLut"     field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (%) area_fraction : annual gross fraction that was transferred into this tile from other land use tiles -->
+   <field id="CMIP6_fracLut"       field_ref="fraclut" /> <!-- P1 (%) area_fraction : fraction of grid cell for each land use tile -->
+   <field id="CMIP6_fracOutLut"    field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (%) area_fraction : annual gross fraction of land use tile  that was transferred into other land use tiles -->
+   <field id="CMIP6_gpp"           field_ref="gpp_ipcc2"         /> <!-- P1 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : only requested for DECK HIST, 1980-present -->
+   <field id="CMIP6_gppGrass"      field_ref="gppgrass"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on grass tiles -->
+   <field id="CMIP6_gppLut"        field_ref="gpplut" /> <!-- P1 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary productivity on land use tile -->
+   <field id="CMIP6_gppShrub"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on Shrub tiles -->
+   <field id="CMIP6_gppTree"       field_ref="gpptree"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on tree tiles -->
+   <field id="CMIP6_gppc13"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_c13 : Mass Flux of 13C out of Atmosphere due to Gross Primary Production on Land -->
+   <field id="CMIP6_gppc14"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_c14 : Mass Flux of 14C out of Atmosphere due to Gross Primary Production on Land -->
+   <field id="CMIP6_grassFrac"     field_ref="grassFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell that is covered by natural grass. -->
+   <field id="CMIP6_grassFracC3"   field_ref="grassFracC3"         /> <!-- P1 (%) area_fraction : C3 grass Area Percentage -->
+   <field id="CMIP6_grassFracC4"   field_ref="grassFracC4"         /> <!-- P1 (%) area_fraction : C4 grass Area Percentage -->
+   <field id="CMIP6_hfdsn"         field_ref="snowflxtot"         /> <!-- P1 (W m-2) surface_downward_heat_flux_in_snow : the net downward heat flux from the atmosphere into the snow that lies on land divided by the land area in the grid cell; reported as missing for snow-free land regions or where the land fraction is 0. -->
+   <field id="CMIP6_hfls"          field_ref="fluxlat"           /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_hflsLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : latent heat flux on land use tile -->
+   <field id="CMIP6_hfss"          field_ref="fluxsens"          /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type.  Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies. -->
+   <field id="CMIP6_hfssLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : sensible heat flux on land use tile -->
+   <field id="CMIP6_hussLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (1) specific_humidity : near-surface specific humidity on land use tile -->
+   <field id="CMIP6_irrLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (kg s-1) surface_downward_water_flux_due_to_irrigation : Irrigation flux including any irrigation for crops, trees, pasture, or urban lawns -->
+   <field id="CMIP6_ksat"          field_ref="ksat"       /> <!-- P1 (1e-6 m s-1)  : Saturated Hydraulic Conductivity -->
+   <field id="CMIP6_lai"           field_ref="lai_ipcc"         /> <!-- P1 (1) leaf_area_index : a ratio obtained by dividing the total upper leaf surface area of vegetation by the (horizontal) surface area of the land on which it grows. Warning: here we take the average over the entire land fraction; not sure it's ok with the DataRequest comment "a ratio obtained by dividing the total upper leaf surface area of vegetation by the (horizontal) surface area of the land on which it grows." PC+JG : lai_ipcc and laimean are related to the same land fraction(note veget_max in stomate_lpj is not the same veget_max in sechiba!). We see other differencies between these output variables coming mainly from pft3 and some from 6,8,9,12. -->
+   <field id="CMIP6_laiLut"        field_ref="lailut" /> <!-- P1 (1)  : Leaf Area Index on Land Use Tile -->
+   <field id="CMIP6_landCoverFrac" field_ref="landCoverFrac" /> <!-- P1 (%) area_fraction : The categories may differ from model to model, depending on their  PFT definitions.   This may include natural PFTs, anthropogenic PFTs, bare soil, lakes, urban areas, etc.   Sum of all should equal the fraction of the grid-cell that is land. Warning: Note: here not multiplying by contfrac according to DR -->
+   <field id="CMIP6_lwsnl"         field_ref="snowliqtot"         /> <!-- P1 (kg m-2) liquid_water_content_of_snow_layer : where land over land: this is computed as the total mass of liquid water contained interstitially within the snow layer of the land portion of a grid cell divided by the area of the land portion of the cell. Warning: Computed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_mrfso"         field_ref="humtot_frozen"         /> <!-- P1 (kg m-2) soil_frozen_water_content : the mass (summed over all all layers) of frozen water. Warning: To be calculated. -->
+   <field id="CMIP6_mrfsofr"       field_ref="profil_froz_hydro"       /> <!-- P1 (1) mass_fraction_of_frozen_water_in_soil_moisture : mass_fraction_of_frozen_water_in_soil_layer -->
+   <field id="CMIP6_mrlqso"        field_ref="profil_liquid_hydro"       /> <!-- P1 (1) mass_fraction_of_unfrozen_water_in_soil_moisture : mass_fraction_of_unfrozen_water_in_soil_layer -->
+   <field id="CMIP6_mrlso"         field_ref="humtot_liquid"         /> <!-- P1 (kg m-2) soil_liquid_water_content : Soil Liquid Water Content -->
+   <field id="CMIP6_mrro"          field_ref="mrro"         /> <!-- P1 (kg m-2 s-1) runoff_flux : the total runoff (including "drainage" through the base of the soil model) leaving the land portion of the grid cell divided by the land area in the grid cell, averaged over the 3-hour interval. -->
+   <field id="CMIP6_mrroLi"        field_ref="dummy_XY_not_provided"  /> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Runoff flux over land ice is the difference between any available liquid water in the snowpack less any refreezing. Computed as the sum of rainfall and melt of snow or ice less any refreezing or water retained in the snowpack -->
+   <field id="CMIP6_mrroLut"       field_ref="mrro_lut" /> <!-- P1 (kg m-2 s-1) runoff_flux : Total runoff from land use tile -->
+   <field id="CMIP6_mrrob"         field_ref="drainage"         /> <!-- P1 (kg m-2 s-1) subsurface_runoff_flux : subsurface_runoff_flux -->
+   <field id="CMIP6_mrros"         field_ref="runoff"         /> <!-- P1 (kg m-2 s-1) surface_runoff_flux : surface_runoff_flux -->
+   <field id="CMIP6_mrsfl"         field_ref="soilmoist_frozen"       /> <!-- P1 (kg m-2) frozen_moisture_content_of_soil_layer : Frozen water content of soil layer -->
+   <field id="CMIP6_mrsll"         field_ref="soilmoist_liquid"       /> <!-- P1 (kg m-2) liquid_moisture_content_of_soil_layer : Liquid water content of soil layer -->
+   <field id="CMIP6_mrso"          field_ref="humtot"         /> <!-- P1 (kg m-2) soil_moisture_content : the mass per unit area  (summed over all soil layers) of water in all phases. -->
+   <field id="CMIP6_mrsoLut"       field_ref="humtot_lut" /> <!-- P1 (kg m-2) soil_moisture_content : Total soil moisture -->
+   <field id="CMIP6_mrsofc"        field_ref="tmcfc"         /> <!-- P1 (kg m-2) soil_moisture_content_at_field_capacity : reported "where land": divide the total water holding capacity of all the soil in the grid cell by the land area in the grid cell;  reported as "missing" where the land fraction is 0. -->
+   <field id="CMIP6_mrsol"         field_ref="soilmoist"       /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : Total water content of soil layer -->
+   <field id="CMIP6_mrsos"         field_ref="humtot_top"         /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : the mass of water in all phases in a thin surface soil layer. -->
+   <field id="CMIP6_mrsosLut"      field_ref="humtot_top_lut" /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : Moisture in Upper Portion of Soil Column of land use tile -->
+   <field id="CMIP6_mrsow"         field_ref="dummy_not_provided"         /> <!-- P1 (1) volume_fraction_of_condensed_water_in_soil_at_field_capacity : relative_soil_moisture_content_above_field_capacity Warning: weird mention to field capacity in the description, overlooked. AD: 3 differents definintions, we do not know what to do -->
+   <field id="CMIP6_mrtws"         field_ref="tws"         /> <!-- P1 (kg m-2) total_water_storage : canopy_and_surface_and_subsurface_water_amount -->
+   <field id="CMIP6_nLand"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) total_land_nitrogen : Total nitrogen in all terrestrial nitrogen pools -->
+   <field id="CMIP6_nLeaf"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) leaf_nitrogen_content : Nitrogen Mass in Leaves -->
+   <field id="CMIP6_nLitter"       field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) litter_nitrogen_content : Nitrogen Mass in Litter Pool -->
+   <field id="CMIP6_nLitterCwd"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_wood_debris_nitrogen_content : Nitrogen Mass in Coarse Woody Debris -->
+   <field id="CMIP6_nLitterSubSurf" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) subsurface_litter_nitrogen_content : Nitrogen Mass in below ground litter (non CWD) -->
+   <field id="CMIP6_nLitterSurf"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) surface_litter_nitrogen_content : Nitrogen Mass in above ground litter (non CWD) -->
+   <field id="CMIP6_nMineral"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) mineral_soil_nitrogen_content : Mineral nitrogen in the soil -->
+   <field id="CMIP6_nMineralNH4"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) mineral_nh4_soil_nitrogen_content : Mineral ammonium in the soil -->
+   <field id="CMIP6_nMineralNO3"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) mineral_no3_soil_nitrogen_content : Mineral nitrate in the soil -->
+   <field id="CMIP6_nOther"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) other_vegegtation_components_nitrogen_content : Nitrogen mass in vegetation components other than leaves, stem and root -->
+   <field id="CMIP6_nProduct"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) nitrogen_content_of_products_of_anthropogenic_land_use_change : Nitrogen Mass in Products of Land Use Change -->
+   <field id="CMIP6_nRoot"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) root_nitrogen_content : Nitrogen Mass in Roots -->
+   <field id="CMIP6_nSoil"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_nitrogen_content : Nitrogen Mass in Soil Pool -->
+   <field id="CMIP6_nStem"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) stem_nitrogen_content : Nitrogen Mass in Stem -->
+   <field id="CMIP6_nVeg"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) vegetation_nitrogen_content : Nitrogen Mass in Vegetation -->
+   <field id="CMIP6_nbp"           field_ref="nbp"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : This is the net mass flux of carbon between land and atmosphere calculated as photosynthesis MINUS the sum of  plant and soil respiration, carbonfluxes  from fire, harvest, grazing  and land use change. Positive flux  is into the land. -->
+   <field id="CMIP6_necbLut"       field_ref="necbLut" /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : net rate of C accumulation (or loss) on land use tile -->
+   <field id="CMIP6_nep"           field_ref="nep"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change : Net Ecosystem Exchange -->
+   <field id="CMIP6_netAtmosLandC13Flux" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_atmos_to_land_C13_flux : Net Mass Flux of 13C between atmosphere and land (positive into land) as a result of all processes. -->
+   <field id="CMIP6_netAtmosLandC14Flux" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_atmos_to_land_C14_flux : Net Mass Flux of 14C between atmosphere and land (positive into land) as a result of all processes. -->
+   <field id="CMIP6_netAtmosLandCO2Flux" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : Net flux of CO2 between atmosphere and land (positive into land) as a result of all processes. Warning: Could be done in Orchidee but not considered as a priority  -->
+   <field id="CMIP6_npp"           field_ref="npp_ipcc"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : Carbon Mass Flux out of Atmosphere due to Net Primary Production on Land -->
+   <field id="CMIP6_nppGrass"      field_ref="nppGrass"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on grass tiles -->
+   <field id="CMIP6_nppLeaf"       field_ref="nppLeaf"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_leaves : This is the rate of carbon uptake by leaves due to NPP -->
+   <field id="CMIP6_nppLut"        field_ref="npplut" /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary productivity on land use tile -->
+   <field id="CMIP6_nppOther"      field_ref="nppOther"         /> <!-- P2 (kg m-2 s-1) net_primary_production_allocated_to_other : net primary production allcoated to other pools (not leaves stem or roots) -->
+   <field id="CMIP6_nppRoot"       field_ref="nppRoot"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_roots : This is the rate of carbon uptake by roots due to NPP -->
+   <field id="CMIP6_nppShrub"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on Shrub tiles -->
+   <field id="CMIP6_nppStem"       field_ref="nppStem"         /> <!-- P2 (kg m-2 s-1) net_primary_production_allocated_to_stem : net primary production allcoated to stem -->
+   <field id="CMIP6_nppTree"       field_ref="nppTree"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on tree tiles -->
+   <field id="CMIP6_nppWood"       field_ref="nppWood"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_wood : This is the rate of carbon uptake by wood due to NPP -->
+   <field id="CMIP6_nudgincsm"     field_ref="nudgincsm"         /> <!-- P1 (kg m-2) nudging_increment_in_water_content_of_soil_layer : nudging_increment_in_water_content_of_soil_layer -->
+   <field id="CMIP6_nudgincswe"    field_ref="nudgincswe"         /> <!-- P1 (kg m-2) nudging_increment_in_surface_snow_and_ice_amount : nudging_increment_in_surface_snow_and_ice_amount -->
+   <field id="CMIP6_nwdFracLut"    field_ref="nwdFraclut" /> <!-- P1 (%)  : fraction of land use tile tile that is non-woody vegetation ( e.g. herbaceous crops) -->
+   <field id="CMIP6_orog"          field_ref="dummy_XY"         /> <!-- P1 (m) surface_altitude : Surface Altitude -->
+   <field id="CMIP6_orog_ist"      field_ref="dummy_XY"         /> <!-- P1 (m) surface_altitude : This is needed in case the ice sheet elevation changes in time -->
+   <field id="CMIP6_pastureFrac"   field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by anthropogenic pasture. -->
+   <field id="CMIP6_pastureFracC3" field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) area_fraction : C3 Pasture Area Percentage -->
+   <field id="CMIP6_pastureFracC4" field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) area_fraction : C4 Pasture Area Percentage -->
+   <field id="CMIP6_pflw"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) liquid_water_content_of_permafrost_layer : "where land over land", i.e., this is the total mass of liquid water contained within the permafrost layer within the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_prra"          field_ref="precip_rain"      /> <!-- P1 (kg m-2 s-1) rainfall_flux : over Land Ice//quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prsn"          field_ref="precip_snow"      /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prveg"         field_ref="prveg"         /> <!-- P1 (kg m-2 s-1) precipitation_flux_onto_canopy : the precipitation flux that is intercepted by the vegetation canopy (if present in model) before reaching the ground. -->
+   <field id="CMIP6_qgwr"          field_ref="drainage"         /> <!-- P1 (kg m-2 s-1) water_flux_from_soil_layer_to_groundwater : water_flux_from_soil_layer_to_groundwater Warning: It can be either undef or drainage. We take the second option for the moment. -->
+   <field id="CMIP6_rGrowth"       field_ref="rGrowth_ipcc"         /> <!-- P1 (kg m-2 s-1) surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_growth : Carbon Mass Flux into Atmosphere due to Growth Autotrophic Respiration on Land Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_rMaint"        field_ref="rMaint_ipcc"         /> <!-- P1 (kg m-2 s-1) surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_maintenance : Carbon Mass Flux into Atmosphere due to Maintenance Autotrophic Respiration on Land Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_ra"            field_ref="ra"         /> <!-- P1 (kg m-2 s-1) plant_respiration_carbon_flux : only requested for DECK HIST, 1980-present Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_raGrass"       field_ref="raGrass"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on grass tiles -->
+   <field id="CMIP6_raLeaf"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_leaves : Total respiration from leaves -->
+   <field id="CMIP6_raLut"         field_ref="ralut" /> <!-- P1 (kg m-2 s-1) plant_respiration_carbon_flux : plant respiration on land use tile -->
+   <field id="CMIP6_raOther"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration : Total respiration from other pools (not leaves stem or roots) -->
+   <field id="CMIP6_raRoot"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_roots : Total Respiration from Roots -->
+   <field id="CMIP6_raShrub"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on Shrub tiles -->
+   <field id="CMIP6_raStem"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_stem : Total Respiration from Stem -->
+   <field id="CMIP6_raTree"        field_ref="raTree"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on tree tiles -->
+   <field id="CMIP6_rac13"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_c13_flux : Mass Flux of 13C into Atmosphere due to Autotrophic (Plant) Respiration on Land -->
+   <field id="CMIP6_rac14"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_c14_flux : Mass Flux of 14C into Atmosphere due to Autotrophic (Plant) Respiration on Land -->
+   <field id="CMIP6_residualFrac"  field_ref="residualFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is land and is covered by "non-vegetation" and "non-bare-soil" (e.g., urban, ice, lakes, etc.) -->
+   <field id="CMIP6_rh"            field_ref="rh_ipcc2"         /> <!-- P1 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration on Land Warning:  Issue with duplicated variables resp_hetero from sechiba and stomate but they are calculated differently. We here need the sechiba variable for 3h freq output. -->
+   <field id="CMIP6_rhGrass"       field_ref="rhGrass"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on grass tiles -->
+   <field id="CMIP6_rhLitter"      field_ref="rhLitter"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux_from_litter : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration from Litter on Land -->
+   <field id="CMIP6_rhLut"         field_ref="rhlut" /> <!-- P1 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : soil heterotrophic respiration on land use tile -->
+   <field id="CMIP6_rhShrub"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on Shrub tiles -->
+   <field id="CMIP6_rhSoil"        field_ref="rhSoil"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux_from_soil : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration from Soil on Land -->
+   <field id="CMIP6_rhTree"        field_ref="rhTree"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on tree tiles -->
+   <field id="CMIP6_rhc13"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_c13_flux : Mass Flux of 13C into Atmosphere due to Heterotrophic Respiration on Land -->
+   <field id="CMIP6_rhc14"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_c14_flux : Mass Flux of 14C into Atmosphere due to Heterotrophic Respiration on Land -->
+   <field id="CMIP6_rivi"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (m3 s-1) water_flux_from_upstream : water_flux_to_downstream -->
+   <field id="CMIP6_rivo"          field_ref="hydrographs"         /> <!-- P1 (m3 s-1) water_flux_to_downstream : water_flux_from_upstream -->
+   <field id="CMIP6_rlds"          field_ref="lwdown"           /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_rlus"          field_ref="lwdown"    >   lwdown - lwnet </field> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_rlusLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave on Land Use Tile -->
+   <field id="CMIP6_rootd"         field_ref="zmaxh"         /> <!-- P1 (m) root_depth : report the maximum soil depth reachable by plant roots (if defined in model), i.e., the maximum soil depth from which they can extract moisture; report as "missing" where the land fraction is 0. -->
+   <field id="CMIP6_rootdsl"       field_ref="dummy_XYSo"       /> <!-- P1 (kg m-2) root_mass_content_of_carbon : Root Distribution -->
+   <field id="CMIP6_rsds"          field_ref="swdown"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : surface solar irradiance for UV calculations -->
+   <field id="CMIP6_rsus"          field_ref="swdown"   >   swdown - swnet </field> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. -->
+   <field id="CMIP6_rsusLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave  on Land Use Tile -->
+   <field id="CMIP6_rzwc"          field_ref="humtot"         /> <!-- P1 (kg m-2) water_content_of_root_zone : water_content_of_root_zone -->
+   <field id="CMIP6_sandfrac"      field_ref="sandfraction"       /> <!-- P1 (1)  : Sand Fraction -->
+   <field id="CMIP6_sftgif"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) land_ice_area_fraction : Fraction of Grid Cell Covered with Glacier -->
+   <field id="CMIP6_shrubFrac"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by shrub. -->
+   <field id="CMIP6_slthick"       field_ref="dlh"       /> <!-- P1 (m)  : Thickness of Soil Layers -->
+   <field id="CMIP6_snc"           field_ref="frac_snow"         /> <!-- P1 (%) surface_snow_area_fraction : Fraction of each grid cell that is occupied by snow that rests on land portion of cell. -->
+   <field id="CMIP6_snc_ist"       field_ref="dummy_ist"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice sheet  only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snd"           field_ref="snowdepth"         /> <!-- P1 (m) surface_snow_thickness : where land over land, this is computed as the mean thickness of snow in the land portion of the grid cell (averaging over the entire land portion, including the snow-free fraction).  Reported as missing where the land fraction is 0. Warning: Computed and weigthed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_snm_land"      field_ref="snowmelt"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Computed as the total surface melt water on the land portion of the grid cell divided by the land area in the grid cell; report as 0.0 for snow-free land regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_snm_land"      field_ref="snowmelt"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : surface_snow_and_ice_melt_flux -->
+   <field id="CMIP6_snm_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Surface Snow Melt -->
+   <field id="CMIP6_snw"           field_ref="snow"         /> <!-- P1 (kg m-2) surface_snow_amount : Computed as the mass of surface snow on the land portion of the grid cell divided by the land area in the grid cell; reported as missing where the land fraction is 0; excluded is snow on vegetation canopy or on sea ice. -->
+   <field id="CMIP6_sootsn"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soot_content_of_surface_snow : the entire land portion of the grid cell is considered, with snow soot content set to 0.0 in regions free of snow. -->
+   <field id="CMIP6_sw"            field_ref="surfwater"         /> <!-- P1 (kg m-2) surface_water_amount_assuming_no_snow : surface_water_amount_assuming_no_snow Warning: includes the fast reservoire -->
+   <field id="CMIP6_sweLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (m)  : snow water equivalent on land use tile -->
+   <field id="CMIP6_tSoilPools"    field_ref="tSoilPools"/> <!-- P2 (s-1) soil_carbon_turnover_rate_by_pool : turnover rate of each model soil carbon pool -->
+   <field id="CMIP6_tas"           field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tasLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (K) air_temperature : near-surface air temperature (2m above displacement height, i.e. t_ref) on land use tile -->
+   <field id="CMIP6_tcs"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) canopy_temperature : Vegetation Canopy Temperature -->
+   <field id="CMIP6_tgs"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) surface_temperature : Temperature of bare soil -->
+   <field id="CMIP6_tpf"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) permafrost_layer_thickness : where land over land: This is the mean thickness of the permafrost layer in the land portion of the grid cell.  Reported as missing in permafrost-free regions. Warning: not yet computed but maybe doable following MICT -->
+   <field id="CMIP6_tran"          field_ref="tran"         /> <!-- P1 (kg m-2 s-1) transpiration_flux : Transpiration -->
+   <field id="CMIP6_treeFrac"      field_ref="treeFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by trees. -->
+   <field id="CMIP6_treeFracBdlDcd" field_ref="treeFracBdlDcd"         /> <!-- P1 (%) area_fraction : Broadleaf deciduous tree fraction -->
+   <field id="CMIP6_treeFracBdlEvg" field_ref="treeFracBdlEvg"         /> <!-- P1 (%) area_fraction : Broadleaf evergreen tree fraction -->
+   <field id="CMIP6_treeFracNdlDcd" field_ref="treeFracNdlDcd"         /> <!-- P1 (%) area_fraction : Needleleaf deciduous tree fraction -->
+   <field id="CMIP6_treeFracNdlEvg" field_ref="treeFracNdlEvg"         /> <!-- P1 (%) area_fraction : Needleleaf evergreen tree fraction -->
+   <field id="CMIP6_treeFracPrimDec" field_ref="treeFracPrimDec"         /> <!-- P1 (%) area_fraction : This is the fraction of the entire grid cell  that is covered by "total primary deciduous trees." -->
+   <field id="CMIP6_treeFracPrimEver" field_ref="treeFracPrimEver"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by primary evergreen trees. -->
+   <field id="CMIP6_treeFracSecDec" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by secondary deciduous trees. -->
+   <field id="CMIP6_treeFracSecEver" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by secondary evergreen trees. -->
+   <field id="CMIP6_ts"            field_ref="dummy_XY"         /> <!-- P1 (K) surface_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsl"           field_ref="ptn"       /> <!-- P1 (K) soil_temperature : Temperature of single near-surface soil layer.  Reported as "missing" for grid cells occupied entirely by "sea". -->
+   <field id="CMIP6_tslsi"         field_ref="temp_sol_new"         /> <!-- P1 (K) surface_temperature : Surface temperature of all surfaces except open ocean. -->
+   <field id="CMIP6_tslsiLut"      field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (K) surface_temperature : Surface Temperature on Landuse Tile -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsn_ist"       field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) temperature_in_surface_snow : This temperature is averaged over all the snow in the grid cell that rests on land or land ice.  When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.   Reported as "missing in regions free of snow on land. Warning: Doable but painful with the two different snow schemes. -->
+   <field id="CMIP6_vegFrac"       field_ref="vegFrac"         /> <!-- P1 (%) area_fraction : Total vegetated fraction -->
+   <field id="CMIP6_vegHeight_land" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over all vegetation types and over the vegetated fraction of a grid cell. -->
+   <field id="CMIP6_vegHeight_veg" field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) canopy_height : Vegetation height averaged over all vegetation types and over the vegetated fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightCrop" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the crop fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightGrass" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the grass fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightPasture" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the pasture fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightShrub" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the shrub fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightTree" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the tree fraction of a grid cell. -->
+   <field id="CMIP6_wetlandCH4"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_emissions : Grid averaged methane emissions from wetlands -->
+   <field id="CMIP6_wetlandCH4cons" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_consumption : Grid averaged methane consuption (methanotrophy) from wetlands -->
+   <field id="CMIP6_wetlandCH4prod" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_production : Grid averaged methane production (methanogenesis) from wetlands -->
+   <field id="CMIP6_wetlandFrac"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) wetland_fraction : Fraction of a grid cell covered by wetland. -->
+   <field id="CMIP6_wilt"          field_ref="wilt"       /> <!-- P1 (%) volume_fraction_of_condensed_water_in_soil_at_wilting_point : Wilting Point -->
+   <field id="CMIP6_wtd"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_soil_moisture_saturation : depth_of_soil_moisture_saturation -->
+</field_definition>
+</context>
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/run.def
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/run.def	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/run.def	(revision 5176)
@@ -0,0 +1,58 @@
+# $Id$
+#
+INCLUDEDEF=physiq.def
+INCLUDEDEF=gcm.def
+INCLUDEDEF=vert.def
+INCLUDEDEF=orchidee.def
+INCLUDEDEF=config.def
+INCLUDEDEF=reprobus.def
+INCLUDEDEF=guide.def
+INCLUDEDEF=inca.def
+## Type de calendrier utilise
+## valeur possible: earth_360d (defaut), earth_365d, earth_366d
+calend= _AUTOBLOCKER_
+## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici )
+dayref= _AUTOBLOCKER_
+##  Annee de l etat  initial (   avec  4  chiffres   )
+anneeref= _AUTOBLOCKER_
+## Nombre de jours d integration
+nday= _AUTOBLOCKER_
+## Remise a zero de la date initiale
+raz_date= _AUTOBLOCKER_
+## periode de sortie des variables de controle (en pas)
+iconser=240
+## periode d ecriture du fichier histoire (en jour)
+iecri=1
+## flag de sortie dynzon
+ok_dynzon=n
+## activation du calcul d equilibrage de charge
+adjust= n
+## activation du filtre fft
+use_filtre_fft=y
+## niveau d impression de controle
+prt_level=0
+###
+### Informations sur la configuration utilisee
+###
+### type_ocean = force / slab  /couple
+### type_ocean is modified automatically by the lmdz.driver 
+type_ocean=_AUTOBLOCKER_
+### version_ocean = nemo / opa8
+version_ocean=nemo
+### activation passage courants surface ocean-glace
+cpl_current=y
+### VEGET= y si ORCHIDEE, =n si bucket
+### VEGET is modified automatically by the lmdz.driver 
+VEGET=_AUTOBLOCKER_
+### Choice of tracers type_trac=lmdz/inca/repr
+### type_trac is set automatically by the lmdz.driver
+type_trac=_AUTOBLOCKER_
+### config_inca=aero/chem needed only if type_trac=inca
+config_inca=_AUTOBLOCKER_ 
+### To activate XIOS ouputs only, set n to use IOIPSL
+ok_all_xml= y
+### Only read by ce0l : Do not set land points on Antartic
+no_ter_antartique=y
+### Do not call phytrac to speed things up
+iflag_phytrac=_AUTO_: DEFAULT = 0
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/traceur.def
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/traceur.def	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/traceur.def	(revision 5176)
@@ -0,0 +1,5 @@
+4
+14 14 H2Ov
+10 10 H2Ol
+10 10 H2Oi
+00 00 Aga
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/vert.def_L39
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/vert.def_L39	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/vert.def_L39	(revision 5176)
@@ -0,0 +1,9 @@
+## Avec ou sans strato
+ok_strato=y 
+## Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=y
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/vert.def_L79
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/vert.def_L79	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/PARAM/vert.def_L79	(revision 5176)
@@ -0,0 +1,41 @@
+#
+# $Id: vert_L79.def 2446 2016-02-16 12:32:59Z fairhead $
+#
+#### Verticale discretisation
+## Modified verticale discretisation for stratospheric versions.
+## The new version can be controled by following parameters
+## Al the parameters are given in km assuming a given scalehigh
+vert_sampling=strato_custom
+## scale hight
+vert_scale=7.
+## width of first layer
+vert_dzmin=0.017
+## dz in the low atmosphere
+vert_dzlow=1.
+## height at which resolution recches dzlow
+vert_z0low=8.7
+## dz in the mid atmsophere
+vert_dzmid=2.
+## height at which resolution recches dzmid
+vert_z0mid=70.
+## width of the transition
+vert_h_mid=20.
+## dz in the high atmsophere
+vert_dzhig=11.
+## height at which resolution recches dz
+vert_z0hig=75.
+## width of the transition
+vert_h_hig=20.
+## vert_prof_dissip used to choose the vertical profile
+## of horizontal dissipation (values are 0 and 1)
+vert_prof_dissip = 1
+dissip_zref = 50
+##  Avec ou sans strato
+ok_strato=y
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-4
+#
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_lmdz.cfg
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_lmdz.cfg	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_lmdz.cfg	(revision 5176)
@@ -0,0 +1,73 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=AECDFF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ bils_global    | "bils"                       | "" | "bils[d=1]"               | "Surf. total heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"   
+ nettop_global  | "tops topl"                  | "" | "(tops[d=1]-topl[d=2])"   | "TOA. total heat flux (GLOBAL)"          | "W/m^2"     | "aire[d=1]"
+ nettop0_global | "tops0 topl0"                | "" | "(tops0[d=1]-topl0[d=2])" | "TOA. total heat flux ClearSky (GLOBAL)" | "W/m^2"     | "aire[d=1]"
+ t2m_global_prio     | "t2m"                        | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (GLOBAL)"       | "degrees C" | "aire[d=1]"
+ t2m_land       | "t2m pourc_ter pourc_lic"    | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (LAND)"         | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ tsol_global    | "tsol"                       | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (GLOBAL)"           | "degrees C" | "aire[d=1]"
+ tsol_land      | "tsol pourc_ter pourc_lic"   | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (LAND)"             | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ precip_global  | "precip"                     | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (GLOBAL)"  | "mm/d"      | "aire[d=1]"
+ precip_land    | "precip pourc_ter pourc_lic" | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (LAND)"    | "mm/d"      | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ evap_global    | "evap"                       | "" | "evap[d=1]"               | "Evaporation (GLOBAL)"                   | "kg/(s*m2)" | "aire[d=1]"
+ evap_land      | "evap pourc_ter pourc_lic"   | "" | "evap[d=1]"               | "Evaporation (LAND)"                     | "kg/(s*m2)" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ flat_global    | "flat"                       | "" | "flat[d=1]"               | "Surf. latent heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"
+ prw_global     | "prw"                        | "" | "prw[d=1]"                | "Precipitable water (GLOBAL)"            | "kg/m^2"    | "aire[d=1]"
+ ener_global    | "nettop precip snow sols soll sens" | "" | "nettop[d=1,x=@ave,y=@ave]+(precip[d=2,x=@ave,y=@ave]-snow[d=3,x=@ave,y=@ave])*2.5008E+6+snow[d=3,x=@ave,y=@ave]*2.8345E+6-sols[d=4,x=@ave,y=@ave]-soll[d=5,x=@ave,y=@ave]-sens[d=6,x=@ave,y=@ave]" | "Destruction d energie par l atmosphere" | "W/m^2" | "1" |
+ bils_corrected_global  | "bils precip snow flat" | "" | "bils[d=1,x=@ave,y=@ave]-flat[d=4,x=@ave,y=@ave]-(precip[d=2,x=@ave,y=@ave]-snow[d=3,x=@ave,y=@ave])*2.5008E+6-snow[d=3,x=@ave,y=@ave]*2.8345E+6" | "Corrected energy budget at surface" | "W/m^2" | "1" |
+ vitu_qbo               | "vitu"                  | "" | "vitu[y=-5:5@ave,x=-180:180@ave,z=5000,d=1]"                | "vitu at 5000 Pa for QBO +5deg/-5deg"            | "m/s"    | "1"
+ od550aer_tropo_forcing | "od550aer"              | "" | "od550aer[d=1]"           | "Total aerosol optical depth at 550nm"   | "-"         | "aire[d=1]"   
+ od550aer_strat_forcing | "od550_STRAT"           | "" | "od550_STRAT[d=1]"        | "Aerosol optical depth at 550nm"         | "-"         | "aire[d=1]"   
+ od550lt1aer_forcing    | "od550lt1aer"           | "" | "od550lt1aer[d=1]"        | "Fine mode optical depth"                | "-"         | "aire[d=1]"   
+ tro3_strato_forcing_DU | "colO3_strat"           | "" | "colO3_strat[x=@ave,y=@ave,d=1]"     | "colonne ozone strato" | "DU" | ""
+ tro3_tropo_forcing_DU  | "colO3_trop"            | "" | "colO3_trop[x=@ave,y=@ave,d=1]"      | "colonne ozone trop"   | "DU" | ""
+ solaire_forcing        | "solaire"               | "" | "solaire[d=1]"   | "Constante solaire"      | "W/m^2" | "1"
+ rsun1_forcing          | "rsun1"                 | "" | "rsun1[d=1]"     | "Fraction bande 1"       | "-"     | "1"
+ co2_ppm_forcing        | "co2_ppm"               | "" | "co2_ppm[d=1]"   | "Concentration du CO2"   | "ppm"   | "1"
+ CH4_ppb_forcing        | "CH4_ppb"               | "" | "CH4_ppb[d=1]"   | "Concentration du CH4"   | "ppb"   | "1"
+ N2O_ppb_forcing        | "N2O_ppb"               | "" | "N2O_ppb[d=1]"   | "Concentration du N2O"   | "ppb"   | "1"
+ CFC11_ppt_forcing      | "CFC11_ppt"             | "" | "CFC11_ppt[d=1]" | "Concentration du CFC11" | "ppt"   | "1"
+ CFC12_ppt_forcing      | "CFC12_ppt"             | "" | "CFC12_ppt[d=1]" | "Concentration du CFC12" | "ppt"   | "1"
+## R_ecc_forcing      | "R_ecc"                  | "" | "R_ecc[d=1]"   | "Excentricite"      | "-"     | "1"
+## R_peri_forcing     | "R_peri"                 | "" | "R_peri[d=1]"  | "Equinoxe"          | "-"     | "1"
+## R_incl_forcing     | "R_incl"                 | "" | "R_incl[d=1]"  | "Inclinaison"       | "deg"   | "1"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_orchidee.cfg
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_orchidee.cfg	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_orchidee.cfg	(revision 5176)
@@ -0,0 +1,66 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=E7FFAB
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+delta_water_stock | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing" |  "" | "((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] + delstock_routing[d=5,l=2:100000])" | "Change in total water stock (LANDS) " | "kg/day/m2 of land" | "Areas[d=2]*Contfrac[d=2]"
+water_budget_closure | "nobiofrac DelSoilMoist_daily DelIntercept_daily DelSWE_daily delstock_routing rain snowf evap riverflow coastalflow" | "" | "(((1-nobiofrac[d=1,l=2:100000])*DelSoilMoist_daily[d=2,l=2:100000] + DelIntercept_daily[d=3,l=2:100000] + DelSWE_daily[d=4,l=2:100000] +  delstock_routing[d=5,l=2:100000])*Areas[d=1]*Contfrac[d=1] -  ((rain[d=6,l=2:100000] + snowf[d=7,l=2:100000] - evap[d=8,l=2:100000])*Areas[d=1]*Contfrac[d=1]  - (riverflow[d=9,l=2:100000] + coastalflow[d=10,l=2:100000])*1000*86400 ))/(4*3.14*6370000*6370000*0.26)" | "Water budget closure (LANDS) " | "kg/day/m2 of land" | "2"
+twbr_lands       | "TWBR"             |  "" | "twbr[d=1,l=2:100000]*86400"       | "Hydrol water buget residu (LANDS)" | "kg/m^2/d" | "Areas[d=1]*Contfrac[d=1]"
+temp_sol_lands   | "temp_sol"         |  "" | "temp_sol[d=1]"                    | "TSOL (LANDS)"                      | "C"        | "Areas[d=1]*Contfrac[d=1]"
+fluxsens_lands   | "fluxsens"         |  "" | "fluxsens[d=1]"                    | "Sensible Flux (LANDS)"             | "W/m^2"    | "Areas[d=1]*Contfrac[d=1]"
+evap_lands       | "evap"             |  "" | "evap[d=1]"                        | "Evaporation (LANDS)"               | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+evapnu_lands     | "evapnu"           |  "" | "evapnu[d=1]"                      | "Soil evaporation (LANDS)"          | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+transpir_lands   | "transpir"         |  "" | "transpir[d=1,k=@sum]"             | "Transpiration (sum over all PFT, LANDS)" | "mm/d" | "Areas[d=1]*Contfrac[d=1]"
+subli_lands      | "subli"            |  "" | "subli[d=1]"                       | "Sublimation (LANDS)"               | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+snow_swe_lands   | "frac_snow snow"   |  "" | "snow[d=2]"                        | "Snow Mass (LANDS)"                 | "kg/m^2"   | "Areas[d=2]*Contfrac[d=2]"
+snownobio_lands  | "snownobio"        |  "" | "snownobio[d=1]"                   | "Snow Other Surfaces (LANDS)"       | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+snowf_lands      | "snowf"            |  "" | "snowf[d=1]"                       | "Snowfall (LANDS)"                  | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+precip_lands     | "rain snowf"       |  "" | "rain[d=1] + snowf[d=2]"           | "Total precipitaion (LANDS)"        | "mm/d"     | "Areas[d=1]*Contfrac[d=1]"
+runoff_lands     | "runoff"           |  "" | "runoff[d=1]"                      | "Surface runoff  (LANDS)"           | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+drainage_lands   | "drainage"         |  "" | "drainage[d=1]"                    | "Drainage  (LANDS)"                 | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+humidity_lands   | "mrso"             |  "" | "mrso[d=1]"                        | "Total Soil Moisture  (LANDS)"      | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+surface_humidity_lands | "mrsos"      |  "" | "mrsos[d=1]"                       | "Top 10cm soil moisture  (LANDS)"   | "kg/m^2"   | "Areas[d=1]*Contfrac[d=1]"
+albedo_lands     | "alb_vis alb_nir"  |  "" | "((alb_vis[d=1]+alb_nir[d=2])*0.5)"| "Mean Albedo (LANDS)"               | "1"        | "Areas[d=1]*Contfrac[d=1]"
+lai_lands        | "LAImean"          |  "" | "LAImean[d=1]"                     | "LAI (mean excluding PFT=1) (LANDS)"| "1"        | "Areas[d=1]*Contfrac[d=1]"
+nee_lands        | "nee maxvegetfrac" |  "" | "(nee[d=1]*365*86400*maxvegetfrac[d=2]*Areas[d=1]*Contfrac[d=1]/1e15)"   | "Net Ecosystem Exchange" | "PgC/yr" | "2"
+maxvegetagri_forcing | "maxvegetfrac" |  "" | "maxvegetfrac[d=1,K=12:13@sum]"    | "veget_max fraction of agriculture [sum of pft=12,13] "| "1"  | "Areas[d=1]*Contfrac[d=1]"
+maxvegetbare_forcing | "maxvegetfrac" |  "" | "maxvegetfrac[d=1,K=1]"            | "veget_max fraction on bare soil [pft=1] "             | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegetn_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=2:9@sum]"         | "veget trees[sum of pft=2:9] (LANDS)"                  | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegetg_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=10:11@sum]+vegetfrac[d=1,K=14:15@sum]"       | "veget natural grasses[sum of pft=10,11,14,15] (LANDS)"      | "1"  | "Areas[d=1]*Contfrac[d=1]"
+vegeta_lands     | "vegetfrac"        |  "" | "vegetfrac[d=1,K=12:13@sum]"       | "veget agriculture [sum of pft=12,13] (LANDS)"         | "1"  | "Areas[d=1]*Contfrac[d=1]"
+
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_stomate.cfg
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_stomate.cfg	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/POST/monitoring01_stomate.cfg	(revision 5176)
@@ -0,0 +1,85 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=EEE8AA
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+woodharvest_fromforcing| "WOOD_HARVEST_PFT VEGET_COV_MAX"| "" | "(WOOD_HARVEST_PFT[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)"| "Wood harvest read from file and prepared to be used"      | "PgC/yr"    | "2"
+fwoodharvest_lands     | "fWoodharvest"                  | "" | "fWoodharvest[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15"              | "CO2 Flux from wood harvesting, positive from atm to land" | "PgC/yr"    | "2"
+fLuc_fHarvest_lands    | "CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE"  | "" | "((CONVFLUX[d=1]+CFLUX_PROD10[d=2]+CFLUX_PROD100[d=3]+HARVEST_ABOVE[d=4])*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)" | "CO2 flux from Land Use Change and Crop Harvesting" | "PgC/yr" | "2"
+fHarvest_lands         | "HARVEST_ABOVE"                 | "" | "((HARVEST_ABOVE[d=1])*AREAS[d=1]*CONTFRAC[d=1]*365/1e15)"                    | "CO2 flux from Land Use Change and Crop Harvesting"        | "PgC/yr" | "2"
+nbp_lands              | "nbp"                           | "" | "(nbp[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365/1e12)"                          | "Net Biospheric Production"                                | "PgC/yr" | "2"
+cSoil_lands            | "TOTAL_SOIL_CARB VEGET_COV_MAX" | "" | "(TOTAL_SOIL_CARB[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"     | "Carbon Soil in Pool"                                      | "PgC"    | "2"
+cVeg_lands             | "TOTAL_M VEGET_COV_MAX"         | "" | "(TOTAL_M[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Carbon in vegetation"                                     | "PgC"    | "2"
+npp_lands              | "NPP VEGET_COV_MAX"             | "" | "(NPP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Net Primary Production"                                   | "PgC/yr" | "2"
+rh_lands               | "HET_RESP VEGET_COV_MAX"        | "" | "(HET_RESP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"        | "Heterotrophic Respiration"                                | "PgC/yr" | "2"
+CONVFLUX_lands         | "CONVFLUX"                      | "" | "(CONVFLUX[d=1]*365*AREAS[d=1]*CONTFRAC[d=1]/1e15)"                   | "Annual release right after deforestation (LANDS)"            | "PgC/yr" | "2"
+CFLUX_PROD10_lands     | "CFLUX_PROD10"                  | "" | "(CFLUX_PROD10[d=1]*365*AREAS[d=1]*CONTFRAC[d=1]/1e15)"               | "Annual release from all 10 year wood product pools (LANDS)"  | "PgC/yr" | "2"
+CFLUX_PROD100_lands    | "CFLUX_PROD100"                 | "" | "(CFLUX_PROD100[d=1]*365*AREAS[d=1]*CONTFRAC[d=1]/1e15)"              | "Annual release from all 100 year wood product pools (LANDS)" | "PgC/yr" | "2"
+BIOMASS_lands          | "TOTAL_M VEGET_COV_MAX"         | "" | "(TOTAL_M[d=1]*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Total Biomass (LANDS)"                               | "PgC"    | "2"
+LITTER_lands           | "TOTAL_BM_LITTER VEGET_COV_MAX" | "" | "(TOTAL_BM_LITTER[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)" | "Biomass to Litter flux (LANDS)"                      | "PgC/yr" | "2"
+GPP_lands              | "GPP VEGET_COV_MAX"             | "" | "(GPP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"             | "Gross Primary Produc (LANDS)"                        | "PgC/yr" | "2"
+MAINT_RESP_lands       | "MAINT_RESP VEGET_COV_MAX"      | "" | "(MAINT_RESP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"      | "Maintenance Resp. (LANDS)"                           | "PgC/yr" | "2"
+GROWTH_RESP_lands      | "GROWTH_RESP VEGET_COV_MAX"     | "" | "(GROWTH_RESP[d=1]*365*VEGET_COV_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=1]/1e15)"     | "Growth Resp. (LANDS)"                                | "PgC/yr" | "2"
+lai_lands              | "lai"                           | "" | "lai[d=1]" 	                                                              | "Leaf Area Fraction"   	                	      | "1"   	 | "Areas[d=1]*CONTFRAC[d=1]"
+treeFracPrimDec_lands  | "treeFracPrimDec"               | "" | "treeFracPrimDec[d=1]"                                                        | "Total Primary Deciduous Tree Cover Fraction"         | "%"   	 | "Areas[d=1]*CONTFRAC[d=1]"
+treeFracPrimEver_lands | "treeFracPrimEver"              | "" | "treeFracPrimEver[d=1]"                                                       | "Total Primary Evergreen Tree Cover Fraction"         | "%" 	 | "Areas[d=1]*CONTFRAC[d=1]"
+c3PftFrac_lands        | "c3PftFrac" 	                 | "" | "c3PftFrac[d=1]" 	                                                      | "Total C3 PFT Cover Fraction" 	 	              | "%" 	 | "Areas[d=1]*CONTFRAC[d=1]"
+c4PftFrac_lands        | "c4PftFrac" 	                 | "" | "c4PftFrac[d=1]" 	                                                      | "Total C4 PFT Cover Fraction" 		              | "%" 	 | "Areas[d=1]*CONTFRAC[d=1]"
+cProduct_lands         | "cProduct"           | "" | "(cProduct[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	            | "Carbon in Products of Land Use Change" 	               | "PgC"    | "2"
+fLuc_lands             | "fLuc"               | "" | "(fLuc[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux to Atmosphere from Land Use Change"            | "PgC/yr" | "2"
+ra_lands               | "ra"                 | "" | "(ra[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 		    | "Autotrophic Respiration"			               | "PgC/yr" | "2"
+fVegLitter_lands       | "fVegLitter"         | "" | "(fVegLitter[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "Total Carbon Flux from Vegetation to Litter"            | "PgC/yr" | "2"
+fLitterSoil_lands      | "fLitterSoil"        | "" | "(fLitterSoil[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)"      | "Total Carbon Flux from Litter to Soil" 	               | "PgC/yr" | "2"
+cLeaf_lands            | "cLeaf"              | "" | "(cLeaf[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                      | "Carbon in Leaves"                                       | "PgC"    | "2"
+cWood_lands            | "cWood"              | "" | "(cWood[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	                    | "Carbon in Wood" 			                       | "PgC"    | "2"
+cRoot_lands            | "cRoot"              | "" | "(cRoot[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	                    | "Carbon in Roots" 			               | "PgC"    | "2"
+cMisc_lands            | "cMisc"              | "" | "(cMisc[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)" 	                    | "Carbon in Other Living Compartments" 	               | "PgC"    | "2"
+cLitterAbove_lands     | "cLitterAbove"       | "" | "(cLitterAbove[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"               | "Carbon in Above-Ground Litter" 	                       | "PgC"    | "2"
+cLitterBelow_lands     | "cLitterBelow"       | "" | "(cLitterBelow[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"               | "Carbon in Below-Ground Litter" 	                       | "PgC"    | "2"
+cSoilFast_lands        | "cSoilFast"          | "" | "(cSoilFast[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                  | "Carbon in Fast Soil Pool" 		               | "PgC"    | "2"
+cSoilMedium_lands      | "cSoilMedium"        | "" | "(cSoilMedium[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                | "Carbon in Medium Soil Pool" 		               | "PgC"    | "2"
+cSoilSlow_lands        | "cSoilSlow"          | "" | "(cSoilSlow[d=1]*AREAS[d=1]*CONTFRAC[d=1]*1000/1e15)"                  | "Carbon in Slow Soil Pool" 	    	               | "PgC"    | "2"
+nppLeaf_lands          | "nppLeaf" 	      | "" | "(nppLeaf[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux from Atmosphere due to NPP Allocation to Leaf" | "PgC/yr" | "2"
+nppWood_lands          | "nppWood" 	      | "" | "(nppWood[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux from Atmosphere due to NPP Allocation to Wood" | "PgC/yr" | "2"
+nppRoot_lands          | "nppRoot" 	      | "" | "(nppRoot[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "CO2 Flux from Atmosphere due to NPP Allocation to Root" | "PgC/yr" | "2"
+nep_lands              | "nep" 		      | "" | "(nep[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	            | "Net Carbon Mass Flux out of Atmophere due to Net Ecosystem Productivity." | "PgC/yr" | "2"
+cMassVariation_lands   | "cMassVariation"     | "" | "(cMassVariation[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)"   | "Carbon Mass Variation"	                               | "PgC/yr" | "2"
+cBal_lands             | "cMassVariation nbp" | "" | "((cMassVariation[d=1,L=2:100000]-nbp[d=2,L=2:100000])*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" | "Total Carbon Balance"    | "PgC/yr" | "2"
+rGrowth_lands          | "rGrowth" 	      | "" | "(rGrowth[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "Growth Autotrophic Respiration" 		               | "PgC/yr" | "2"
+rMaint_lands           | "rMaint" 	      | "" | "(rMaint[d=1]*AREAS[d=1]*CONTFRAC[d=1]*86400*365*1000/1e15)" 	    | "Maintenance Autotrophic Respiration" 	               | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/config.card
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/config.card	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/config.card	(revision 5176)
@@ -0,0 +1,146 @@
+# $Id$
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=CM6-pdSST-futAntSIC-017
+#----- Short Name of Experiment
+ExperimentName=pdSST-futAntSIC
+#----- DEVT TEST PROD
+SpaceName=PROD
+TagName=LMDZOR
+# LongName, ModelName and Member are used to copy dr2xml files
+LongName="IPSLCM6.1.9-LR"
+ModelName=IPSL-CM6A-LR
+Member=r17i1p1f1
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZOR/amip_CMIP6
+DataProject=gencmip6
+#============================
+#-- leap, noleap, 360d
+CalendarType=leap
+#-- Begin and end of job 
+#-- "YYYY-MM-DD"
+DateBegin=2000-03-01
+#DateEnd=2001-02-28
+DateEnd=2001-05-31
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length for one execution
+PeriodLength=5M
+#PeriodLength=11M
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ)
+SRF= (orchidee, ORCHIDEE)
+SBG= (stomate, ORCHIDEE)
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component: Real name of executable, Name of executable in the run directory 
+#D- Here is set 47MPI*8OMP which is suitable for resolution 144x142x79
+#D- Change to 31MPI*4OMP for resolution 96x95x39
+ATM= (gcm.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("", "")
+SBG= ("", "")
+IOS= (xios_server.exe, xios.x, 12MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- by default: config.card describes no restart for all components 
+#D-             ie start from Levitus or limit files
+#D- If you want to restart all components from the same simulation,
+#D-      put OveRule flag to 'y' and set the next 3 parameters
+OverRule=y
+#D- Last day of the experience used as restart for all components
+RestartDate=2000-03-31
+#D- Define restart simulation name for all components
+RestartJobName=CM6-amip-redo-017
+#D- Path Server Group Login
+RestartPath=/ccc/store/cont003/gencmip6/p86ggas/IGCM_OUT/LMDZOR/PROD/amip
+
+#========================================================================
+#D-- ATM -
+[ATM]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in orchidee.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in stomate.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- RebuildFrequency determines the frequency of rebuild submission
+RebuildFrequency=NONE
+#D- PackFrequency determines the frequency of pack submission
+#PackFrequency=11M
+PackFrequency=15M
+#D- TimeSeriesFreqency determines the frequency of post-processing submission
+#D- Set NONE to deactivate the creation of all time series 
+TimeSeriesFrequency=NONE
+#D- SeasonalFrequency determines the length for each seasonal average
+#D- Set NONE to deactivate the creation of all seasonal avereage
+SeasonalFrequency=NONE
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation's years
+SeasonalFrequencyOffset=0
+#D- If you want to produce compute PCMDI metrics from seasonal average
+#D- Set TRUE or FALSE to activate/deactivate the metrics computation.
+MetricsPCMDI=FALSE
+
+#========================================================================
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/lock
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/lock	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/lock	(revision 5176)
@@ -0,0 +1,1 @@
+lock
Index: /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/readme
===================================================================
--- /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/readme	(revision 5176)
+++ /CMIP6/PAMIP/CM6-pdSST-futAntSIC-017/readme	(revision 5176)
@@ -0,0 +1,7 @@
+In ../../../libIGCM/libIGCM_config/libIGCM_config.ksh
+L406 
+old
+        (( PeriodLengthInDays  = PeriodLengthInDays + $( IGCM_date_DaysInMonth $year $(( 10#${month} + ${i} - 12 )) ) ))
+new
+        (( PeriodLengthInDays  = PeriodLengthInDays + $( IGCM_date_DaysInMonth $(( year + 1 )) $(( 10#${month} + ${i} - 12 )) ) ))
+
