Ignore:
Timestamp:
02/13/20 15:45:24 (4 years ago)
Author:
jgipsl
Message:

Updated LMDZOR_v6.3 configuration files to follow LMDZOR_v6.2 structure: compilation script instead of makefiles... These chages should be used together with new LMDZ/trunk, IOIPSL/trunk and XIOS/trunk. Only difference between v6.2 and v6.3 is the version of ORCHIDEE: ORCHIDEE_2_2 in v6.2 and ORCHIDEE_3 in v6.3.

Location:
CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/clim_360d
Files:
3 edited

Legend:

Unmodified
Added
Removed

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/clim_360d/COMP/lmdz.card

    r4724 r4936  
    3737ByPass_hgardfou_mats=n 
    3838 
    39 # Set OutLevel to choose the level of output for LMDZ 
    40 # OutLevel=low/medium/high 
    41 OutLevel=low 
    42  
    43 # Set COSP activation and output frequency (monthly, daily, HF) = y/n 
    44 LMDZ_COSP_OK=y 
    45 LMDZ_COSP_monthly=n 
    46 LMDZ_COSP_daily=n 
    47 LMDZ_COSP_hf=n 
    48  
    49 # Set NMC output frequency (monthly, daily, HF) = y/n 
    50 LMDZ_NMC_monthly=n 
    51 LMDZ_NMC_daily=n 
    52 LMDZ_NMC_hf=n 
    53  
    5439# Nugding : ok_guide=y/n 
    5540# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. 
    5641ok_guide=n 
    5742 
     43# Specify which output file to activate and at which output_level 
     44# Use an integer to specify the output level or NONE if to deactivate the file 
     45# output_level_filename=1     : activate the corresponding file with low output level 
     46# output_level_filename=10    : activate the corresponding file with high output level 
     47# output_level_filename=NONE  : the file will not be written 
     48output_level_histmth = 5 
     49output_level_histday = NONE 
     50output_level_histhf  = NONE 
     51output_level_histmthNMC = NONE 
     52output_level_histdayNMC = NONE 
     53output_level_histhfNMC  = NONE 
     54output_level_histstrataer = NONE 
     55output_level_histdaystrataer = NONE 
     56output_level_histstn      = NONE 
     57 
     58# Activate COSP in config.def and set corresponding output files 
     59LMDZ_COSP_OK=y 
     60output_level_histmthCOSP = NONE 
     61output_level_histdayCOSP = NONE 
     62output_level_histhfCOSP  = NONE 
     63 
    5864[InitialStateFiles] 
    5965List=   (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\ 
    … …  
    6268[BoundaryFiles] 
    6369List=() 
    64 ListNonDel= (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_360d/limit_1979_2008_clim.nc, limit.nc),\ 
    65             (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\ 
     70# 
     71# With CMIP6 aerosols version 1 
     72# With 3D ozone 
     73ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc,   aerosols.nat.nc),\ 
    6674            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1995_from_inca.nc,   aerosols1980.nc),\ 
    6775            (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1979_2008_clim.nc, climoz_LMDZ.nc),\ 
     76            (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_360d/limit_1979_2008_clim.nc, limit.nc),\ 
    6877            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc),\ 
    6978            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\ 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/clim_360d/COMP/xios.card

    r2396 r4936  
    2121 
    2222[OutputText] 
    23 List=   (xios_client_*) 
     23List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*) 
    2424 
    2525[OutputFiles] 

  • CONFIG/UNIFORM/v6/LMDZOR_v6.3/EXPERIMENTS/LMDZ/clim_360d/config.card

    r4353 r4936  
    2929#-- Compression level for netcdf output files 
    3030CompressionLevel=2 
     31#============================ 
     32#-- Source following file with module settings, only if it exists 
     33EnvFile=${SUBMIT_DIR}/../ARCH/arch.env 
     34#============================ 
     35#-- ResolAtm indicates the atmospheric resolution 
     36#   This variable is used in the executable name  
     37ResolAtm=144x142x79 
     38#============================ 
     39# OptMode indicates the optimization mode choosen during compilation 
     40# This variable is used in the executable name 
     41OptMode=prod 
     42 
    3143#======================================================================== 
    3244#D-- ListOfComponents - 
    … …  
    3547ATM= (lmdz, LMDZ) 
    3648IOS= (xios, XIOS) 
     49#======================================================================== 
    3750 
    38 #======================================================================== 
    3951#D-- Executable - 
    4052[Executable] 
    41 #D- For each component: Real name of executable, Name of executable in the run directory  
    42 #D- Here is set 47MPI*8OMP which is suitable for resolution 144x142x79 
     53#D- For each component: First argument is the executable name as in bin folder. 
     54#D  ResolAtm and OptMode are set in UserChoices section. 
     55#D- Here is set 71MPI*8OMP which is suitable for resolution 144x142x79 
    4356#D- Change to 31MPI*4OMP for resolution 96x95x39 
    44 ATM= (gcm.e, lmdz.x, 71MPI, 8OMP) 
    45 IOS= (xios_server.exe, xios.x, 1MPI) 
     57ATM= (gcm_${ResolAtm}_${OptMode}.e, lmdz.x, 71MPI, 8OMP) 
     58IOS= (xios_server_${OptMode}.exe, xios.x, 1MPI) 
    4659 
    4760#======================================================================== 
    … …  
    6376#D-- ATM - 
    6477[ATM] 
    65 WriteFrequency="1M" 
    6678# If config_Restarts_OverRule == 'n' next 4 params are read 
    6779Restart= n 
    … …  
    7688#D-- IOS - 
    7789[IOS] 
    78 WriteFrequency="" 
    7990# If config_Restarts_OverRule == 'n' next 4 params are read 
    8091Restart= n 
Note: See TracChangeset for help on using the changeset viewer.