Index: CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/lmdz.card	(revision 3772)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/lmdz.card	(revision 3772)
@@ -0,0 +1,219 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use
+LMDZ_Physics=NPv6.1
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes.
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=annuel
+
+# Manage radiative aerosol effect and ozone
+# flag_aersol=7 to activate natural aerosol + MACv2SP
+flag_aerosol=7
+ok_ade=y
+ok_aie=y
+aerosol_couple=n
+read_climoz=1
+ok_cdnc=y
+
+# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
+ByPass_hgardfou_teta=n
+
+# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
+ByPass_hgardfou_mats=n
+
+# Set OutLevel to choose the level of output for LMDZ
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and output frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=y
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC output frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=y	   
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+# Nugding : ok_guide=y/n
+# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
+ok_guide=n
+
+[InitialStateFiles]
+List=	(${R_IN}/ATM/START/${config_UserChoices_LandSeaMask}xLMD${RESOL_ATM_XY}/start_${config_UserChoices_LandSeaMask}xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\
+        (${R_IN}/ATM/START/${config_UserChoices_LandSeaMask}xLMD${RESOL_ATM_XY}/startphy_${config_UserChoices_LandSeaMask}xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc) 
+
+[BoundaryFiles]
+List=   (${R_IN}/ATM/LIMIT/HadISST2.2.0.0-r0/interpol/${RESOL_ATM_XY}_${config_UserChoices_LandSeaMask}_gregorian/limit_${year}.nc, limit.nc),\
+        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
+        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
+        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc),\
+        (${R_IN}/CMIP6/piControl-spinup/1850/dr2xml_LMDZ.xml, dr2xml_lmdz.xml)
+#        (${R_IN}/CMIP6/DR2XML_DUMMY_FULL.HEAVY/dr2xml_LMDZ.xml, dr2xml_lmdz.xml)
+
+# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
+# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
+ListNonDel= (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
+            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
+            (${R_IN}/ATM/AEROSOLS/PLUME/MACv2.0-SP_v1.nc,   MACv2.0-SP_v1.nc), \
+            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1980_from_inca.nc, aerosols.nat.nc),\
+            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
+
+[SmoothFiles]
+List=   ()
+
+[ParametersFiles]
+List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
+        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
+        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
+        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
+        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
+        (${SUBMIT_DIR}/PARAM/traceur.def, .),                               \
+        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
+        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
+        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
+        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
+        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
+
+[RestartFiles]
+List=   (restart.nc, restart.nc, start.nc), \
+        (restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
+
+[OutputFiles]
+List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
+        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
+        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    Post_1M_histmthNMC),    \
+        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
+        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
+        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
+        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
+        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
+        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
+        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
+        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
+ChunckJob2D = 100Y 
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card	(revision 3772)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/orchidee.card	(revision 3772)
@@ -0,0 +1,87 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=CWRR
+
+VEGET_UPDATE=1Y
+
+# Set climatology lai map
+LAI_MAP=y
+
+# Specify output level for output files
+# Only the files sechiba_history.nc, sechiba_out_2.nc and sechiba_history_4dim.nc can be set here.
+# output_level_filename=0     : lowest level writing only variables needed for the monitoring
+# output_level_filename=12    : highest level which will output all variables
+# output_level_filename=NONE  : deactivate the file
+output_level_sechiba_history = 11
+output_level_sechiba_out_2 = NONE
+output_level_sechiba_history_4dim = 11
+
+# Specify output frequency for each file [1y, 1mo, 1d, 10800s, 1ts]
+# Settings using WriteFrequency in config.card is not longer used
+output_freq_sechiba_history = 1mo
+output_freq_sechiba_out_2 = 10800s
+output_freq_sechiba_history_4dim = 1mo
+
+
+[InitialStateFiles]
+List=	(${R_IN}/SRF/soils_param.nc, . ), \
+	(${R_IN}/SRF/reftemp.nc, . ), \
+	(${R_IN}/SRF/routing.nc, . ), \
+	(${R_IN}/SRF/LAI/lai2D_ORCHIDEE_2_0_v1.nc, lai2D.nc), \
+        (${R_IN}/SRF/albedo/alb_bg_modisopt_2D_ESA_v2.nc, alb_bg.nc ), \
+        (${R_IN}/SRF/cartepente2d_15min.nc, .)
+
+[BoundaryFiles]
+List= (${R_IN}/SRF/PFTMAPS/CMIP6/ESA-LUH2v2/historical/15PFT.v1/PFTmap_${year}.nc, PFTmap.nc) ,\
+      (${R_IN}/SRF/WOODHARVEST/LUH2v2/historical/woodharvest_${year}.nc, woodharvest.nc),\
+      (${R_IN}/CMIP6/piControl-spinup/1850/dr2xml_orchidee.xml, .)
+#      (${R_IN}/CMIP6/DR2XML_DUMMY_FULL.HEAVY/dr2xml_orchidee.xml, .)
+
+ListNonDel= ()
+
+[SmoothFiles]
+List= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)   ,\
+        (${SUBMIT_DIR}/PARAM/ping_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_orchidee.xml, .)  ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/file_def_input_orchidee.xml, .) ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/context_orchidee.xml, .)   ,\
+	(${MODIPSL}/modeles/ORCHIDEE/src_xml/field_def_orchidee.xml, .)
+
+[RestartFiles]
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def, used_orchidee.def, iodef.xml, context_orchidee.xml, field_def_orchidee.xml, file_def_orchidee.xml, file_def_input_orchidee.xml, river_desc.nc)
+
+[OutputFiles]
+List=   (sechiba_history.nc,   ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_history_4dim.nc,${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history_4dim.nc, NONE), \
+        (sechiba_out_2.nc,     ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc,   NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, evap, fluxlat, fluxsens, netrad, qair, rain, runoff, snow, snownobio, snowf, frac_snow, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac, TWBR, riverflow, coastalflow, DelSoilMoist_daily, DelIntercept_daily, DelSWE_daily, delstock_routing, snowmelt, LAImean, transpir, evapnu)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, ptn, nee)
+ChunckJob3D = NONE
+Seasonal = ON
+
+[Post_HF_sechiba_out_2]
+Patches = ()
+GatherWithInternal = (lon, lat, time_counter, Areas, Contfrac, time_centered, time_centered_bounds)
+TimeSeriesVars2D = (mrsos, mrro)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (ptn)
+ChunckJob3D = 10Y
+Seasonal = OFF
+
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/xios.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/xios.card	(revision 3772)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/COMP/xios.card	(revision 3772)
@@ -0,0 +1,29 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	()
+
+[RestartFiles]
+List=	(NONE)
+
+[OutputText]
+List=   (xios_client_*,out_xios.x.err.*, out_xios.x.out.*)
+
+[OutputFiles]
+List=   ()
+
+
+
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/config.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/config.card	(revision 3772)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/EXPERIMENTS/LMDZOR/highresmip_CMIP6/config.card	(revision 3772)
@@ -0,0 +1,125 @@
+# $Id$
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=LMDZOR01
+#----- Short Name of Experiment
+ExperimentName=highresmip
+#----- DEVT TEST PROD
+SpaceName=TEST
+LongName="LMDZOR configuration"
+TagName=LMDZOR
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZOR/highresmip_CMIP6
+# LandSeaMask specifies the coastal land-sea mask used for the surface forcing files
+# Use LandSeaMasl=eORCA1.2 for resolution 144x142 and LandSeaMask=default for other resolutions 
+LandSeaMask=eORCA1.2
+#============================
+#-- leap, noleap, 360d
+CalendarType=leap
+#-- Begin and end of job 
+#-- "YYYY-MM-DD"
+DateBegin=1950-01-01
+DateEnd=2014-12-31
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length for one execution
+PeriodLength=1Y
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ)
+SRF= (orchidee, ORCHIDEE)
+IOS= (xios, XIOS)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+#D- For each component: Real name of executable, Name of executable in the run directory 
+#D- Here is set 47MPI*8OMP which is suitable for resolution 144x142x79
+#D- Change to 31MPI*4OMP for resolution 96x95x39
+ATM= (gcm.e, lmdz.x, 71MPI, 8OMP)
+SRF= ("", "")
+IOS= (xios_server.exe, xios.x, 1MPI)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- by default: config.card describes no restart for all components 
+#D-             ie start from Levitus or limit files
+#D- If you want to restart all components from the same simulation,
+#D-      put OveRule flag to 'y' and set the next 3 parameters
+OverRule=n
+#D- Last day of the experience used as restart for all components
+RestartDate=2319-12-31
+#D- Define restart simulation name for all components
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- ATM -
+[ATM]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- SRF -
+[SRF]
+# WriteFrequency is not used any more for ORCHIDEE 
+# Output files are now managed in orchidee.card 
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=2319-12-31
+#D- Define restart simulation name for this component
+RestartJobName=CM607-LR-pdCtrl-01
+#D- Path Server Group Login
+RestartPath=${R_IN}/RESTART/IPSLCM6/DEVT/pdControl
+
+#========================================================================
+#D-- IOS -
+[IOS]
+WriteFrequency=""
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=
+# Define restart simulation name for this component
+RestartJobName=
+RestartPath=
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- RebuildFrequency determines the frequency of rebuild submission
+RebuildFrequency=NONE
+#D- PackFrequency determines the frequency of pack submission
+PackFrequency=5Y
+#D- TimeSeriesFreqency determines the frequency of post-processing submission
+#D- Set NONE to deactivate the creation of all time series 
+TimeSeriesFrequency=10Y
+#D- SeasonalFrequency determines the length for each seasonal average
+#D- Set NONE to deactivate the creation of all seasonal avereage
+SeasonalFrequency=10Y
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation's years
+SeasonalFrequencyOffset=0
+#D- If you want to produce compute PCMDI metrics from seasonal average
+#D- Set TRUE or FALSE to activate/deactivate the metrics computation.
+MetricsPCMDI=FALSE
+
+#========================================================================
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/DRIVER/orchidee.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/DRIVER/orchidee.driver	(revision 3771)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/DRIVER/orchidee.driver	(revision 3772)
@@ -59,4 +59,13 @@
     else
         IGCM_comp_modifyDefFile nonblocker orchidee.def VEGET_UPDATE 0Y
+    fi
+
+    # Set LAI_MAP in orchidee.def acording to value set in orchidee.card section UserChoices
+    # If LAI_MAP is not definded in orchidee.card, set default value n
+    # Note: this option is only read by ORCHIDEE if starting without restart files
+    if [ ! X${orchidee_UserChoices_LAI_MAP} = X ] ; then
+        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   ${orchidee_UserChoices_LAI_MAP}
+    else
+        IGCM_comp_modifyDefFile nonblocker orchidee.def LAI_MAP   DEFAULT
     fi
 
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_CWRR
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_CWRR	(revision 3771)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_CWRR	(revision 3772)
@@ -190,4 +190,6 @@
 VEGET_UPDATE = _AUTO_
 
+# Read lai map (default n)
+LAI_MAP = _AUTO_ : DEFAULT = n
 
 # Parameters related to surface and thermal physical properties
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_Choi
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_Choi	(revision 3771)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/orchidee.def_Choi	(revision 3772)
@@ -80,4 +80,6 @@
 VEGET_UPDATE = _AUTO_
 
+# Read lai map (default n)
+LAI_MAP = _AUTO_ : DEFAULT = n
 
 # Create river description file
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/ping_LMDZ.xml
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/ping_LMDZ.xml	(revision 3772)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/ping_LMDZ.xml	(revision 3772)
@@ -0,0 +1,585 @@
+<!-- $Id: CMIP6_ping_atmos.xml 3285 2018-03-19 10:16:35Z fairhead $ -->
+<!-- Ping files generated by dr2xml 0.27 using Data Request 01.00.21 -->
+<!-- lrealms= ['atmos'] -->
+<!-- exact= False -->
+<!--  listof_home_vars : None
+ tierMax : 3
+ realms_per_context : {'lmdz': ['atmos', 'atmos land'], 'nemo': ['seaIce', 'ocean', 'ocean seaIce', 'ocnBgchem', 'seaIce ocean'], 'orchidee': ['land', 'landIce land', 'land landIce', 'landIce']}
+ max_priority : 3
+ max_file_size_in_floats : 20000000000.0
+ grid_choice : {'IPSL-CM6A-LR': 'LR'}
+ excluded_vars_file : None
+ sizes : {'LR': [20592, 79, 32768, 91, 30, 14, 128]}
+ ping_variables_prefix : CMIP6_
+ source_types : {'IPSL-CM6A-LR': 'AOGCM AER BGC'}
+ path_extra_tables : None
+ grid_policy : native
+ path_special_defs : None
+ mips : {'LR': set(['CORDEX', 'GMMIP', 'RFMIP', 'VolMIP', 'CMIP6', 'ScenarioMIP', 'GeoMIP', 'C4MIP', 'PDRMIP', 'CMIP', 'DECK', 'LUMIP', 'CMIP5', 'CFMIP', 'OMIP', 'DAMIP', 'CCMI', 'SolarMIP', 'VIACSAB', 'SIMIP', 'DCPP', 'ISMIP6', 'AerChemMIP', 'PMIP', 'FAFMIP', 'DynVar', 'LS3MIP', 'SPECS', 'HighResMIP'])}
+ excluded_vars : []
+ orphan_variables : {}
+--> 
+
+<context id="LMDZ">
+<field_definition>
+<!-- for variables which realm equals one of _atmos-->
+   <field id="CMIP6_H2p"           field_ref="dummy_not_provided"           /> <!-- P1 ()  : 2H in total precipitation -->
+   <field id="CMIP6_H2s"           field_ref="dummy_not_provided"           /> <!-- P1 ()  : 2H in solid precipitation -->
+   <field id="CMIP6_H2wv"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : H2 in water vapor -->
+   <field id="CMIP6_O17p"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 17O in total precipitation -->
+   <field id="CMIP6_O17s"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 17O in solid precipitation -->
+   <field id="CMIP6_O17wv"         field_ref="dummy_not_provided"           /> <!-- P1 ()  : O17 in water vapor -->
+   <field id="CMIP6_O18p"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 18O in total precipitation -->
+   <field id="CMIP6_O18s"          field_ref="dummy_not_provided"           /> <!-- P1 ()  : 18O in solid precipitation -->
+   <field id="CMIP6_O18wv"         field_ref="dummy_not_provided"           /> <!-- P1 ()  : O18 in water vapor -->
+   <field id="CMIP6_aerasymbnd"    field_ref="dummy_not_provided"           /> <!-- P1 (1) band_aerosol_asymmetry_parameter : Aerosol level asymmetry parameter for each band -->
+   <field id="CMIP6_aeroptbnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) atmosphere_absorption_optical_thickness_due_to_ambient_aerosol_particles : Aerosol level extinction optical depth for each band -->
+   <field id="CMIP6_aerssabnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) single_scattering_albedo_in_air_due_to_ambient_aerosol_particles : Aerosol level single-scattering albedo for each band -->
+   <field id="CMIP6_albdiffbnd"    field_ref="dummy_not_provided"           /> <!-- P1 (1) band_diffuse_albedo : Diffuse surface albedo for each band -->
+   <field id="CMIP6_albdirbnd"     field_ref="dummy_not_provided"           /> <!-- P1 (1) band_direct_albedo : Direct surface albedo for each band -->
+   <field id="CMIP6_albisccp"      field_ref="albisccp"                     /> <!-- P1 (1) cloud_albedo : time-means are weighted by the ISCCP Total Cloud Fraction - see  http://cfmip.metoffice.com/COSP.html -->
+   <field id="CMIP6_aod550volso4"  field_ref="od550_STRAT"                  /> <!-- P1 (1e-09) aerosol_optical_depth_due_to_stratospheric_volcanic_aerosols : aerosol optical thickness at 550 nm due to stratospheric volcanic aerosols  -->
+   <field id="CMIP6_areacella"     field_ref="aire"                         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report atmospheric variables and any other variable using that grid (e.g., soil moisture content). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_ccb"           field_ref="pbase"                        /> <!-- P1 (Pa) air_pressure_at_convective_cloud_base : Air Pressure at Convective Cloud Base -->
+   <field id="CMIP6_ccldncl"       field_ref="dummy_XY"                     /> <!-- P1 (m-3) number_concentration_of_convective_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Convective Cloud Tops -->
+   <field id="CMIP6_cct"           field_ref="ptop"                         /> <!-- P1 (Pa) air_pressure_at_convective_cloud_top : Air Pressure at Convective Cloud Top -->
+   <field id="CMIP6_cfadDbze94"    field_ref="cfadDbze94"                   /> <!-- P1 (1) histogram_of_equivalent_reflectivity_factor_over_height_above_reference_ellipsoid : CloudSat Radar Reflectivity CFAD -->
+   <field id="CMIP6_cfadLidarsr532" field_ref="cfad_lidarsr532"             /> <!-- P1 (1) histogram_of_backscattering_ratio_over_height_above_reference_ellipsoid : CALIPSO Scattering Ratio -->
+   <field id="CMIP6_cfc113global"  field_ref="dummy_not_provided"           /> <!-- P1 (1e-12) mole_fraction_of_cfc113_in_air : Global Mean Mole Fraction of CFC113 -->
+   <field id="CMIP6_cfc11global"   field_ref="CFC11_ppt"                    /> <!-- P1 (1e-12) mole_fraction_of_cfc11_in_air : Global Mean Mole Fraction of CFC11 -->
+   <field id="CMIP6_cfc12global"   field_ref="CFC12_ppt"                    /> <!-- P1 (1e-12) mole_fraction_of_cfc12_in_air : Global Mean Mole Fraction of CFC12 -->
+   <field id="CMIP6_ch4"           field_ref="dummy_not_provided"           /> <!-- P1 (mol mol-1) mole_fraction_of_methane_in_air : Mole Fraction of CH4 -->
+   <field id="CMIP6_ch4global"     field_ref="CH4_ppb"                      /> <!-- P1 (1e-09) mole_fraction_of_methane_in_air : Global Mean Mole Fraction of CH4 -->
+   <field id="CMIP6_ci"            field_ref="ftime_con"                    /> <!-- P1 (1) convection_time_fraction : Fraction of time that convection occurs in the grid cell. -->
+   <field id="CMIP6_cl"            field_ref="rneb"> rneb*100.      </field>   <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : Cloud Area Fraction in Atmosphere Layer -->
+   <field id="CMIP6_clc"           field_ref="rnebcon"> rnebcon*100. </field>  <!-- P1 (%) convective_cloud_area_fraction_in_atmosphere_layer : Convective Cloud Area Fraction -->
+   <field id="CMIP6_clcalipso"     field_ref="pclcalipso"                   /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Cloud Area Fraction --> 
+   <field id="CMIP6_clcalipso2"    field_ref="clcalipso2"                   /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Cloud Fraction Undetected by CloudSat --> 
+   <field id="CMIP6_clcalipsoice"  field_ref="clcalipsoice"                 /> <!-- P1 (%) ice_cloud_area_fraction_in_atmosphere_layer : CALIPSO Ice Cloud Fraction -->
+   <field id="CMIP6_clcalipsoliq"  field_ref="clcalipsoliq"                 /> <!-- P1 (%) liquid_cloud_area_fraction_in_atmosphere_layer : CALIPSO Liquid Cloud Fraction -->
+   <field id="CMIP6_cldicemxrat"   field_ref="cldicemxrat"                  /> <!-- P2 (1) cloud_ice_mixing_ratio : Cloud Ice Mixing Ratio -->
+   <field id="CMIP6_cldnci"        field_ref="dummy_XY"                     /> <!-- P1 (m-3) number_concentration_of_ice_crystals_in_air_at_ice_cloud_top : Ice Crystal Number Concentration of Cloud Tops -->
+   <field id="CMIP6_cldncl"        field_ref="cldncl" expr=" @cldncl / @lcc" > cldncl / lcc </field> <!-- P1 (m-3) number_concentration_of_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Cloud Tops -->
+   <field id="CMIP6_cldnvi"        field_ref="dummy_not_provided"           /> <!-- P1 (m-2) atmosphere_number_content_of_cloud_droplets : Column Integrated Cloud Droplet Number -->
+   <field id="CMIP6_cldwatmxrat"   field_ref="cldwatmxrat"                  /> <!-- P2 (1) cloud_liquid_water_mixing_ratio : Cloud Water Mixing Ratio -->
+   <field id="CMIP6_clhcalipso"    field_ref="pclhcalipso"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage High Level Cloud -->
+   <field id="CMIP6_cli"           field_ref="iwcon"                        /> <!-- P1 (kg kg-1) mass_fraction_of_cloud_ice_in_air : Includes both large-scale and convective cloud. This is the mass of cloud ice in the grid cell divided by the mass of air (including the water in all phases) in the grid cell. This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clic"          field_ref="icc3dcon"                     /> <!-- P2 (1) mass_fraction_of_convective_cloud_ice_in_air : Calculated as the mass of convective cloud ice  in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_climodis"      field_ref="climodis"                     /> <!-- P1 (%) ice_cloud_area_fraction : MODIS Ice Cloud Fraction -->
+   <field id="CMIP6_clis"          field_ref="icc3dstra"                    /> <!-- P2 (1) mass_fraction_of_stratiform_cloud_ice_in_air : Calculated as the mass of stratiform cloud ice  in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clisccp"       field_ref="clisccp2"                     /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : ISCCP Percentage Cloud Area -->
+   <field id="CMIP6_clivi"         field_ref="iwp"                          /> <!-- P1 (kg m-2) atmosphere_cloud_ice_content : mass of ice water in the column divided by the area of the column (not just the area of the cloudy portion of the column). Includes precipitating frozen hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clivic"        field_ref="dummy_XY"                     /> <!-- P1 (kg m-2) atmosphere_convective_cloud_ice_content : Convective Ice Water Path  -->
+   <field id="CMIP6_cllcalipso"    field_ref="pcllcalipso"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage Low Level Cloud -->
+   <field id="CMIP6_clmcalipso"    field_ref="pclmcalipso"                  /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : CALIPSO Percentage Mid Level Cloud -->
+   <field id="CMIP6_clmisr"        field_ref="clMISR"                       /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MISR cloud area fraction -->
+   <field id="CMIP6_cls"           field_ref="dummy_XYA"                    /> <!-- P1 (%) stratiform_cloud_area_fraction_in_atmosphere_layer : Stratiform Cloud Area Fraction -->
+   <field id="CMIP6_clt"           field_ref="cldt"> cldt*100.        </field> <!-- P1 (%) cloud_area_fraction : for the whole atmospheric column, as seen from the surface or the top of the atmosphere. Includes both large-scale and convective cloud. -->
+   <field id="CMIP6_clt_land"      field_ref="cldt"> cldt*100.        </field> <!-- P1 (%) cloud_area_fraction : Total cloud fraction -->
+   <field id="CMIP6_cltc"          field_ref="dummy_XY"         /> <!-- P1 (%) convective_cloud_area_fraction : For the whole atmospheric column, as seen from the surface or the top of the atmosphere. Includes only convective cloud. -->
+   <field id="CMIP6_cltcalipso"    field_ref="pcltcalipso"                  /> <!-- P1 (%) cloud_area_fraction :  CALIPSO Total Cloud Fraction -->
+   <field id="CMIP6_cltisccp"      field_ref="tclisccp"                     /> <!-- P1 (%) cloud_area_fraction : ISCCP Total Cloud Fraction -->
+   <field id="CMIP6_cltmodis"      field_ref="cltmodis"                     /> <!-- P1 (%) cloud_area_fraction : MODIS Total Cloud  Fraction -->
+   <field id="CMIP6_clw"           field_ref="lwcon"                        /> <!-- P1 (kg kg-1) mass_fraction_of_cloud_liquid_water_in_air : Includes both large-scale and convective cloud. Calculate as the mass of cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cells. Precipitating hydrometeors are included ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwc"          field_ref="lcc3dcon"                     /> <!-- P2 (1) mass_fraction_of_convective_cloud_liquid_water_in_air : Calculated as the mass of convective cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwmodis"      field_ref="clwmodis"                     /> <!-- P1 (%) liquid_water_cloud_area_fraction : MODIS Liquid Cloud Fraction -->
+   <field id="CMIP6_clws"          field_ref="lcc3dstra"                    /> <!-- P2 (1) mass_fraction_of_stratiform_cloud_liquid_water_in_air : Calculated as the mass of stratiform cloud liquid water in the grid cell divided by the mass of air (including the water in all phases) in the grid cell.  This includes precipitating hydrometeors ONLY if the precipitating hydrometeors affect the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwvi"         field_ref="lwp"                          /> <!-- P1 (kg m-2) atmosphere_cloud_condensed_water_content : mass of condensed (liquid + ice) water in the column divided by the area of the column (not just the area of the cloudy portion of the column). Includes precipitating hydrometeors ONLY if the precipitating hydrometeor affects the calculation of radiative transfer in model. -->
+   <field id="CMIP6_clwvic"        field_ref="dummy_XY"                     /> <!-- P1 (kg m-2) atmosphere_convective_cloud_condensed_water_content : Convective Condensed Water Path -->
+   <field id="CMIP6_co2"           field_ref="dummy_not_provided"           /> <!-- P1 (mol mol-1) mole_fraction_of_carbon_dioxide_in_air :  Mole Fraction of CO2 -->
+   <field id="CMIP6_co23D"         field_ref="dummy_not_provided"           /> <!-- P2 (kg kg-1) CO2_3D_tracer : requested for all Emissions-driven runs -->
+   <field id="CMIP6_co2mass"       field_ref="mass_sum"> co2_ppm*1e-6*44.011/28.97*mass_sum </field> <!-- P1 (kg) atmosphere_mass_of_carbon_dioxide : Total Atmospheric Mass of CO2 -->
+   <field id="CMIP6_co2s"          field_ref="dummy_not_provided"           /> <!-- P2 (1e-06) mole_fraction_of_carbon_dioxide_in_air : Atmosphere CO2 -->
+   <field id="CMIP6_columnmassflux" field_ref="dummy_XY"                    /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : Column integrated mass flux -->
+   <field id="CMIP6_conccmcn"      field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_coarse_mode_ambient_aerosol_in_air : Number Concentration Coarse Mode Aerosol -->
+   <field id="CMIP6_conccn"        field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_ambient_aerosol_in_air : Aerosol Number Concentration -->
+   <field id="CMIP6_concdust"      field_ref="concdust"                     /> <!-- P1 (kg m-3) mass_concentration_of_dust_dry_aerosol_in_air : Concentration of Dust -->
+   <field id="CMIP6_concnmcn"      field_ref="dummy_not_provided"           /> <!-- P1 (m-3) number_concentration_of_nucleation_mode_ambient_aerosol_in_air : Number Concentration of Nucleation Mode Aerosol -->
+   <field id="CMIP6_demc"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) convective_cloud_longwave_emissivity : This is the in-cloud emissivity obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_dems"          field_ref="dummy_not_provided"                    /> <!-- P2 (1) stratiform_cloud_longwave_emissivity : This is the in-cloud emissivity obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_diabdrag"      field_ref="dummy_XYA"                    /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_numerical_artefacts : Tendency of Eastward Wind from Numerical Artefacts -->
+   <field id="CMIP6_dmc"           field_ref="upwd"                         /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_deep_convective_mass_flux : The net mass flux  represents the difference between the updraft and downdraft components.   This is calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_dtauc"         field_ref="dummy_not_provided"           /> <!-- P2 (1) atmosphere_optical_thickness_due_to_convective_cloud : This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell -->
+   <field id="CMIP6_dtaus"         field_ref="dummy_not_provided"           /> <!-- P2 (1) atmosphere_optical_thickness_due_to_stratiform_cloud : This is the in-cloud optical depth obtained by considering only the cloudy portion of the grid cell. -->
+   <field id="CMIP6_edt"           field_ref="kz"                           /> <!-- P1 (m2 s-1) atmosphere_heat_diffusivity : Eddy Diffusivity Coefficient for Temperature Variable -->
+   <field id="CMIP6_epfy"          field_ref="dummy_XYA"                    /> <!-- P1 (m3 s-2) northward_eliassen_palm_flux_in_air : Northward Component of the Eliassen-Palm Flux -->
+   <field id="CMIP6_epfz"          field_ref="dummy_XYA"                    /> <!-- P1 (m3 s-2) upward_eliassen_palm_flux_in_air : zonal mean; hence YZT -->
+   <field id="CMIP6_evspsbl"       field_ref="evap"                         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux : Evaporation at surface; flux of water into the atmosphere due to conversion of both liquid and solid phases to vapor (from underlying surface and vegetation) -->
+   <field id="CMIP6_evu"           field_ref="evu"                          /> <!-- P1 (m2 s-1) atmosphere_momentum_diffusivity : Eddy Viscosity Coefficients for Momentum -->
+   <field id="CMIP6_fco2antt"      field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_anthropogenic_emission : This is requested only for the emission-driven coupled carbon climate model runs.  Does not include natural fire sources but, includes all anthropogenic sources, including fossil fuel use, cement production, agricultural burning, and sources associated with anthropogenic land use change excluding forest regrowth. -->
+   <field id="CMIP6_fco2fos"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fossil_fuel_combustion : This is the prescribed anthropogenic CO2 flux from fossil fuel use, including cement production, and flaring (but not from land-use changes, agricultural burning, forest regrowth, etc.) -->
+   <field id="CMIP6_fco2nat"       field_ref="dummy_not_provided"           /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_natural_sources : This is what the atmosphere sees (on its own grid).  This field should be equivalent to the combined natural fluxes of carbon (requested in the L_mon and O_mon tables) that account for natural exchanges between the atmosphere and land or ocean reservoirs (i.e., "net ecosystem biospheric productivity", for land, and "air to sea CO2 flux", for ocean.) -->
+   <field id="CMIP6_grpllsprof"    field_ref="dummy_not_provided"           /> <!-- P2 (kg m-2 s-1) large_scale_graupel_flux : Stratiform Graupel Flux  -->
+   <field id="CMIP6_grplmxrat"     field_ref="dummy_not_provided"           /> <!-- P2 (1) mass_fraction_of_graupel_in_air : Graupel Mixing Ratio -->
+   <field id="CMIP6_h2o"           field_ref="ovap"> ovap+ocond       </field> <!-- P2 (1) mass_fraction_of_water_in_air : includes all phases of water -->
+   <field id="CMIP6_hcfc22global"  field_ref="dummy_not_provided"           /> <!-- P1 (1e-12) mole_fraction_of_hcfc22_in_air : Global Mean Mole Fraction of HCFC22 -->
+   <field id="CMIP6_hfdsl"         field_ref="bils"> bils*fract_ter   </field> <!-- P1 (W m-2) surface_downward_heat_flux_in_air : Ground heat flux -->
+   <field id="CMIP6_hfdsnb"        field_ref="dummy_not_provided"           /> <!-- P1 (W m-2)  : Downward heat flux at snow botton -->
+   <field id="CMIP6_hfls_ist"      field_ref="lat_lic"                      /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : Surface Upward Latent Heat Flux -->
+   <field id="CMIP6_hfls_land"     field_ref="lat_ter"                      /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : Latent heat flux -->
+   <field id="CMIP6_hfls"          field_ref="flat"> flat*(-1.)       </field>  <!-- P1 (W m-2) surface_upward_latent_heat_flux : Surface Upward Latent Heat Flux -->
+   <field id="CMIP6_hfmlt"         field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) surface_snow_and_ice_melt_heat_flux : Energy of fusion -->
+   <field id="CMIP6_hfrs"          field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) temperature_flux_due_to_rainfall_expressed_as_heat_flux_onto_snow_and_ice : Heat transferred to snowpack by rainfall -->
+   <field id="CMIP6_hfsbl"         field_ref="dummy_not_provided"           /> <!-- P1 (W m-2) surface_snow_and_ice_sublimation_heat_flux : Energy of sublimation -->
+   <field id="CMIP6_hfss"          field_ref="sens"> sens*(-1.)       </field> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Surface Upward Sensible Heat Flux -->
+   <field id="CMIP6_hfss_land"     field_ref="sens_ter"                     /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Sensible heat flux -->
+   <field id="CMIP6_hfss_ist"      field_ref="sens_lic"                     /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : Surface Upward Sensible Heat Flux -->
+   <field id="CMIP6_hur"           field_ref="rhum"> rhum*100.        </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->
+   <field id="CMIP6_hurs"          field_ref="rh2m"             /> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->
+   <field id="CMIP6_hursmax"       field_ref="rh2m_max" freq_op="1d" > @rh2m_max </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->   
+   <field id="CMIP6_hursmin"       field_ref="rh2m_min" freq_op="1d" > @rh2m_min </field> <!-- P1 (%) relative_humidity : This is the relative humidity with respect to liquid water for T> 0 C, and with respect to ice for T<0 C. -->  
+   <field id="CMIP6_hursminCrop"   field_ref="dummy_not_provided"         /> <!-- P1 (%) relative_humidity : Daily Minimum Near-Surface Relative Humidity over Crop Tile -->
+   <field id="CMIP6_hus"           field_ref="ovap"             /> <!-- P1 (1.0) specific_humidity : Specific Humidity -->
+   <field id="CMIP6_huss"          field_ref="q2m"              /> <!-- P1 (1.0) specific_humidity : This is sampled synoptically. -->
+   <field id="CMIP6_iareafl"       field_ref="fract_sic"         >fract_sic*aire </field> <!-- P3 (m2) floating_ice_shelf_area : Antarctica -->
+   <field id="CMIP6_iareagr"       field_ref="fract_lic"         >fract_lic*aire </field> <!-- P3 (m2) grounded_ice_sheet_area : Greenland -->
+   <field id="CMIP6_intuadse"      field_ref="ue"               /> <!-- P1 (1.e6 J m-1 s-1) vertical_integral_eastward_wind_by_dry_static_energy : Vertically integrated Eastward dry transport (cp.T +zg).u (Mass_weighted_vertical integral of the product of northward wind by dry static_energy per mass unit) -->
+   <field id="CMIP6_intuaw"        field_ref="uwat"             /> <!-- P1 (kg m-1 s-1) vertical_integral_eastward_wind_by_total_water : Vertically integrated Eastward moisture transport (Mass_weighted_vertical integral of the product of eastward wind by total water mass per unit mass) -->
+   <field id="CMIP6_intvadse"      field_ref="ve"               /> <!-- P1 (1.e6 J m-1 s-1) vertical_integral_northward_wind_by_dry_static_energy : Vertically integrated Northward dry transport (cp.T +zg).v (Mass_weighted_vertical integral of the product of northward wind by dry static_energy per mass unit) -->
+   <field id="CMIP6_intvaw"        field_ref="vwat"             /> <!-- P1 (kg m-1 s-1) vertical_integral_northward_wind_by_total_water : Vertically integrated Northward moisture transport (Mass_weighted_vertical integral of the product of northward wind by total water mass per unit mass) -->
+   <field id="CMIP6_jo2"           field_ref="dummy_not_provided"        /> <!-- P1 (s-1) photolysis_rate_of_molecular_oxygen : zonal mean; hence YZT -->
+   <field id="CMIP6_jo3"           field_ref="dummy_not_provided"        /> <!-- P1 (s-1) photolysis_rate_of_ozone : zonal mean; hence YZT --> 
+   <field id="CMIP6_jpdftaureicemodis" field_ref="crimodis"              /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MODIS Optical Thickness-Particle Size joint  distribution, ice -->
+   <field id="CMIP6_jpdftaureliqmodis" field_ref="crlmodis"              /> <!-- P1 (%) cloud_area_fraction_in_atmosphere_layer : MODIS Optical Thickness-Particle Size joint  distribution, liquid -->
+   <field id="CMIP6_latitude"      field_ref="dummy_not_provided"        /> <!-- P1 (degrees_north) latitude : Latitude -->
+   <field id="CMIP6_lim"           field_ref="dummy_not_provided"        /> <!-- P2 (kg) land_ice_mass : Greenland -->
+   <field id="CMIP6_limnsw"        field_ref="dummy_not_provided"        /> <!-- P2 (kg) land_ice_mass_not_displacing_sea_water : Greenland -->
+   <field id="CMIP6_loadbc"        field_ref="loadbc"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_black_carbon_dry_aerosol : Load of Black Carbon Aerosol -->
+   <field id="CMIP6_loaddust"      field_ref="loaddust"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_dust_dry_aerosol : Load of Dust -->
+   <field id="CMIP6_loadnh4"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_ammonium_dry_aerosol : Load of NH4 -->
+   <field id="CMIP6_loadno3"       field_ref="loadno3"          /> <!-- P1 (kg m-2) atmosphere_mass_content_of_nitrate_dry_aerosol : Load of NO3 -->
+   <field id="CMIP6_loadoa"        field_ref="loadoa"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Organic Matter -->
+   <field id="CMIP6_loadpoa"       field_ref="loadoa"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Primary Organic Matter -->
+   <field id="CMIP6_loadso4"       field_ref="loadso4"          /> <!-- P1 (kg m-2) atmosphere_mass_content_of_sulfate_dry_aerosol : Load of SO4 -->
+   <field id="CMIP6_loadsoa"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol : Load of Dry Aerosol Secondary Organic Matter -->
+   <field id="CMIP6_loadss"        field_ref="loadss"           /> <!-- P1 (kg m-2) atmosphere_mass_content_of_seasalt_dry_aerosol : Load of Seasalt -->
+   <field id="CMIP6_longitude"     field_ref="dummy_not_provided"         /> <!-- P1 (degrees_east) longitude : Longitude -->
+   <field id="CMIP6_lwsffluxaero"  field_ref="dummy_not_provided"         /> <!-- P2 (W m-2) longwave__flux__due_to_volcanic_aerosols_at_the_surface : downwelling longwave  flux  due to volcanic aerosols at the surface to be diagnosed through double radiation call -->
+   <field id="CMIP6_lwsrfasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_instantaneous_longwave_forcing_due_to_dust : All-sky Surface Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwsrfcsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_instantaneous_longwave_forcing_due_to_dust_in_clearsky : Clear-sky Surface Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwtoaasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing : all sky lw-rf dust at toa -->
+   <field id="CMIP6_lwtoacsaer"    field_ref="toplwad0"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing : Clear-Sky LW-RF Aerosols at TOA -->
+   <field id="CMIP6_lwtoacsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_longwave_forcing_due_to_dust_in_clearsky : Clear-sky TOA Longwave radiative flux due to Dust -->
+   <field id="CMIP6_lwtoafluxaerocs" field_ref="dummy_not_provided"       /> <!-- P1 (W m-2) longwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling longwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call -->
+   <field id="CMIP6_mc"            field_ref="mc"               /> <!-- P1 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : The net mass flux should represent the difference between the updraft and downdraft components.  The flux is computed as the mass divided by the area of the grid cell. -->
+   <field id="CMIP6_mcd"           field_ref="dnwd"              > (dnwd-dnwd0) &gt; 0 ? (dnwd-dnwd0) : 0 </field> <!-- P2 (kg m-2 s-1) atmosphere_downdraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_mcu"           field_ref="upwd"             /> <!-- P1 (kg m-2 s-1) atmosphere_updraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_md"            field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Wet diameter mode coarse insoluble --> 
+   <field id="CMIP6_mrroLi"        field_ref="mrroli"                    /> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Land Ice Runoff Flux -->
+   <field id="CMIP6_n2o"           field_ref="dummy_not_provided"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrous_oxide_in_air : Mole Fraction of N2O -->
+   <field id="CMIP6_n2oglobal"     field_ref="N2O_ppb"                   /> <!-- P1 (1e-09) mole_fraction_of_nitrous_oxide_in_air : Global Mean Mole Fraction of N2O -->
+   <field id="CMIP6_o3"            field_ref="ozone"                     /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Mole Fraction of O3 -->
+   <field id="CMIP6_od443dust"     field_ref="dummy_not_provided"        /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Optical thickness at 443 nm Dust -->
+   <field id="CMIP6_od550aerso"    field_ref="od550_STRAT"               /> <!-- P1 (1) strat_aerosol_optical_depth : Stratospheric Optical depth at 550 nm (all aerosols) 2D-field (here we limit the computation of OD to the stratosphere only) -->
+   <field id="CMIP6_od550so4so"    field_ref="dummy_not_provided"        /> <!-- P1 (1)  : Stratospheric Optical depth at 550 nm (sulphate only) 2D-field (here we limit the computation of OD to the stratosphere only) --> 
+   <field id="CMIP6_od865dust"     field_ref="dummy_not_provided"        /> <!-- P1 (1) atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles : Optical thickness at 865 nm Dust -->
+   <field id="CMIP6_parasolRefl" field_ref="parasol_refl"                /> <!-- P1 (1) toa_bidirectional_reflectance : PARASOL Reflectance -->
+   <field id="CMIP6_pctisccp"      field_ref="ctpisccp"                  /> <!-- P1 (Pa) air_pressure_at_cloud_top : time-means weighted by the ISCCP Total Cloud Fraction - see  http://cfmip.metoffice.com/COSP.html -->
+   <field id="CMIP6_pfull"         field_ref="pres"                      /> <!-- P1 (Pa) air_pressure : Pressure on Model Levels -->
+   <field id="CMIP6_phalf"         field_ref="paprs"                     /> <!-- P1 (Pa) air_pressure : Pressure on Model Half-Levels -->
+   <field id="CMIP6_pr"            field_ref="precip"                    /> <!-- P1 (kg m-2 s-1) precipitation_flux : at surface; includes both liquid and solid phases from all types of clouds (both large-scale and convective) -->
+   <field id="CMIP6_prCrop"        field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) precipitation_flux : Precipitation over Crop Tile -->
+   <field id="CMIP6_prc"           field_ref="pluc"                      /> <!-- P1 (kg m-2 s-1) convective_precipitation_flux : at surface; includes both liquid and solid phases. -->
+   <field id="CMIP6_prcprof"       field_ref="pr_con_l"                  /> <!-- P2 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall Flux -->
+   <field id="CMIP6_prcsh"         field_ref="dummy_not_provided"        /> <!-- P1 (kg m-2 s-1) shallow_convective_precipitation_flux : Shallow convection precipitation flux -->
+   <field id="CMIP6_prhmax"        field_ref="prhmax" freq_op="1h" >   @prhmax   </field> <!-- P1 (kg m-2 s-1) precipitation_flux : Maximum Hourly Precipitation Rate -->
+   <field id="CMIP6_prlsns"        field_ref="pr_lsc_i"                  /> <!-- P2 (kg m-2 s-1) large_scale_snowfall_flux : large-scale precipitation of all forms of water in the solid phase. -->
+   <field id="CMIP6_prlsprof"      field_ref="pr_lsc_l"                  /> <!-- P2 (kg m-2 s-1) large_scale_rainfall_flux : Stratiform Rainfall Flux -->
+   <field id="CMIP6_prra_land"     field_ref="rain_fall"         /> <!-- P2 (kg m-2 s-1) rainfall_flux : rainfall_flux -->
+   <field id="CMIP6_prra_ifs"      field_ref="rain_fall"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : computed as the total mass of liquid water falling as liquid rain  into the ice-free portion of the ocean divided by the area of the ocean portion of the grid cell. -->
+   <field id="CMIP6_prra_ist"      field_ref="rain_fall"         /> <!-- P1 (kg m-2 s-1) rainfall_flux : over Land Ice//quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prra"          field_ref="rain_fall"                 /> <!-- P1 (kg m-2 s-1) rainfall_flux : Rainfall rate -->
+   <field id="CMIP6_prrc_land"     field_ref="rain_con"         /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : convective_rainfall_flux -->
+   <field id="CMIP6_prrc"          field_ref="rain_con"                  /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall rate -->
+   <field id="CMIP6_prrsn"         field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_rainfall_onto_snow : mass_fraction_of_rainfall_onto_snow -->
+   <field id="CMIP6_prsn"          field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : at surface; includes precipitation of all forms of water in the solid phase -->
+   <field id="CMIP6_prsn_ifs"      field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : computed as the total mass per unit time of solid-phase precipitation falling into the ice-free portion of the ocean divided by the area of the ocean portion of the grid cell.   (Snowfall flux includes all types of solid-phase precipitation.) -->
+   <field id="CMIP6_prsn_ist"      field_ref="snow"                     /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_prsnc_land"    field_ref="pr_con_i"        /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : convective_snowfall_flux -->
+   <field id="CMIP6_prsnc"         field_ref="pr_con_i"                 /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : Convective Snowfall rate -->
+   <field id="CMIP6_prsnsn"        field_ref="dummy_not_provided"       /> <!-- P1 (1) mass_fraction_of_snowfall_onto_snow : mass_fraction_of_snowfall_onto_snow -->
+   <field id="CMIP6_prw"           field_ref="prw"                      /> <!-- P1 (kg m-2) atmosphere_water_vapor_content : Water Vapor Path -->
+   <field id="CMIP6_ps"            field_ref="psol"                     /> <!-- P1 (Pa) surface_air_pressure : not, in general, the same as mean sea-level pressure -->
+   <field id="CMIP6_psitem"        field_ref="dummy_XYA"                /> <!-- P1 (kg s^-1) meridional_streamfunction_transformed_eulerian_mean : zonal mean; hence YZT -->
+   <field id="CMIP6_psl"           field_ref="slp"                      /> <!-- P1 (Pa) air_pressure_at_sea_level : not, in general, the same as surface pressure -->
+   <field id="CMIP6_rainmxrat"     field_ref="dummy_not_provided"       /> <!-- P2 (1) mass_fraction_of_rain_in_air : rain_mixing_ratio -->
+   <field id="CMIP6_reffcclwtop"   field_ref="dummy_not_provided"       /> <!-- P1 (m) effective_radius_of_convective_cloud_liquid_water_particle_at_liquid_water_cloud_top : Cloud-Top Effective Droplet Radius In Convective Cloud -->
+   <field id="CMIP6_reffclic"      field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_convective_cloud_ice_particle : Hydrometeor Effective Radius of Convective Cloud Ice -->
+   <field id="CMIP6_reffclis"      field_ref="ref_ice"                  /> <!-- P2 (m) effective_radius_of_stratiform_cloud_ice_particle : Hydrometeor Effective Radius of Stratiform Cloud Ice -->
+   <field id="CMIP6_reffclwc"      field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_convective_cloud_liquid_water_particle : Hydrometeor Effective Radius of Convective Cloud Liquid Water -->
+   <field id="CMIP6_reffclws"      field_ref="reffclws" expr="@reffclws / @lcc3dstra" > reffclws / lcc3dstra </field> <!-- P2 (m) effective_radius_of_stratiform_cloud_liquid_water_particle : Hydrometeor Effective Radius of Stratiform Cloud Liquid Water -->
+   <field id="CMIP6_reffgrpls"     field_ref="dummy_not_provided"       /> <!-- P2 (m) effective_radius_of_stratiform_cloud_graupel_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffrainc"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_convective_cloud_rain_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffrains"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_stratiform_cloud_rain_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffsclwtop"   field_ref="reffclwtop" expr="@reffclwtop / @lcc" > reffclwtop / lcc </field> <!-- P1 (m) effective_radius_of_stratiform_cloud_liquid_water_particle_at_liquid_water_cloud_top : Cloud-Top Effective Droplet Radius In Stratiform Cloud -->
+   <field id="CMIP6_reffsnowc"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_convective_cloud_snow_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_reffsnows"     field_ref="dummy_XYA"        /> <!-- P2 (m) effective_radius_of_stratiform_cloud_snow_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). -->
+   <field id="CMIP6_rld"           field_ref="rld"              /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air : Downwelling Longwave Radiation -->
+   <field id="CMIP6_rld4co2"       field_ref="rld4co2"          /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air : Downwelling Longwave Radiation 4XCO2 Atmosphere --> 
+   <field id="CMIP6_rldcs"         field_ref="rldcs"            /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Longwave Radiation -->
+   <field id="CMIP6_rldcs4co2"     field_ref="rldcs4co2"        /> <!-- P1 (W m-2) downwelling_longwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlds_ist"      field_ref="LWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rlds"          field_ref="LWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rldscs"        field_ref="LWdnSFCclr"       /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : Surface Downwelling Longwave Radiation -->
+   <field id="CMIP6_rls"           field_ref="soll"             /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : Net Longwave Surface Radiation -->
+   <field id="CMIP6_rls_land"      field_ref="flw_ter"             /> <!-- P1 (W m-2) surface_net_downward_longwave_flux : Net longwave radiation -->
+   <field id="CMIP6_rlu"           field_ref="rlu"              /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rlu4co2"       field_ref="rlu4co2"          /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air : Upwelling Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlucs"         field_ref="rlucs"            /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air_assuming_clear_sky : Includes also the fluxes at the surface and TOA. -->
+   <field id="CMIP6_rlucs4co2"     field_ref="rlucs4co2"        /> <!-- P1 (W m-2) upwelling_longwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlus_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave Radiation -->
+   <field id="CMIP6_rlus"          field_ref="LWupSFC"          /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave Radiation -->
+   <field id="CMIP6_rlut"          field_ref="topl"             /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : TOA Outgoing Longwave Radiation -->
+   <field id="CMIP6_rlut4co2"      field_ref="rlut4co2"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : TOA Outgoing Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rlutcs"        field_ref="topl0"            /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Longwave Radiation -->
+   <field id="CMIP6_rlutcs4co2"    field_ref="rlutcs4co2"       /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Longwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsd"           field_ref="rsd"              /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rsd4co2"       field_ref="rsd4co2"          /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air : Downwelling Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsdcs"         field_ref="rsdcs"            /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Raiation -->
+   <field id="CMIP6_rsdcs4co2"     field_ref="rsdcs4co2"        /> <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsdcsbnd"      field_ref="dummy_not_provided"        />   <!-- P1 (W m-2) downwelling_shortwave_flux_in_air_assuming_clear_sky : Downwelling Clear-Sky Shortwave Radiation at each level for each band -->
+   <field id="CMIP6_rsds"          field_ref="SWdnSFC"          /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : This is the 3-hour mean flux. -->
+   <field id="CMIP6_rsds_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : Surface Downwelling Shortwave Radiation -->
+   <field id="CMIP6_rsdscs"        field_ref="SWdnSFCclr"       /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Downwelling Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsdscsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Downwelling Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsdscsdiff"    field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_diffuse_downwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Diffuse Downwelling Clear Sky Shortwave Radiation --> 
+   <field id="CMIP6_rsdsdiff"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_diffuse_downwelling_shortwave_flux_in_air : Surface Diffuse Downwelling Shortwave Radiation -->
+   <field id="CMIP6_rsdt"          field_ref="SWdnTOA"          /> <!-- P1 (W m-2) toa_incoming_shortwave_flux : TOA Incident Shortwave Radiation -->
+   <field id="CMIP6_rss_land"      field_ref="fsw_ter"             /> <!-- P1 (W m-2) surface_net_downward_shortwave_flux : Net shortwave radiation -->
+   <field id="CMIP6_rss"           field_ref="sols"             /> <!-- P1 (W m-2) surface_net_downward_shortwave_flux : Net Shortwave Surface Radiation -->
+   <field id="CMIP6_rsu"           field_ref="rsu"              /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air : Fluxes are requested at all levels -->
+   <field id="CMIP6_rsu4co2"       field_ref="rsu4co2"          /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air : Upwelling Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsucs"         field_ref="rsucs"            />  <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Includes also the fluxes at the surface and TOA. -->
+   <field id="CMIP6_rsucs4co2"     field_ref="rsucs4co2"        /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsucsbnd"      field_ref="dummy_not_provided"        /> <!-- P1 (W m-2) upwelling_shortwave_flux_in_air_assuming_clear_sky : Upwelling Clear-Sky Shortwave Radiation at each level for each band -->
+   <field id="CMIP6_rsus_ist"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave Radiation -->
+   <field id="CMIP6_rsus"          field_ref="SWupSFC"          /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave Radiation --> 
+   <field id="CMIP6_rsuscs"        field_ref="SWupSFCclr"       /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Upwelling Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsuscsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air_assuming_clear_sky : Surface Upwelling Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rsut"          field_ref="SWupTOA"          /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : TOA Outgoing Shortwave Radiation -->
+   <field id="CMIP6_rsut4co2"      field_ref="rsut4co2"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : TOA Outgoing Shortwave Radiation in 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsutcs"        field_ref="SWupTOAclr"       /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation -->
+   <field id="CMIP6_rsutcs4co2"    field_ref="rsutcs4co2"       /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation 4XCO2 Atmosphere -->
+   <field id="CMIP6_rsutcsafbnd"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) band_toa_outgoing_shortwave_flux_assuming_clean_clear_sky : TOA Outgoing Clear-Sky, Aerosol-Free Shortwave Radiation in Bands -->
+   <field id="CMIP6_rsutcsbnd"     field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : TOA Outgoing Clear-Sky Shortwave Radiation for each band -->
+   <field id="CMIP6_rtmt"          field_ref="nettop"           /> <!-- P1 (W m-2) net_downward_radiative_flux_at_top_of_atmosphere_model : i.e., at the top of that portion of the atmosphere where dynamics are explicitly treated by the model. This is reported only if it differs from the net downward radiative flux at the top of the atmosphere. -->
+   <field id="CMIP6_rv"            field_ref="dummy_XY"         /> <!-- P1 (s-1) atmosphere_relative_vorticity : Relative Vorticity at 850 hPa -->
+   <field id="CMIP6_sblnosn"       field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) sublimation_amount_assuming_no_snow : sublimation_amount_assuming_no_snow -->
+   <field id="CMIP6_sci"           field_ref="ftime_th"         /> <!-- P1 (1.0) shallow_convection_time_fraction : Fraction of time that shallow convection occurs in the grid cell. -->
+   <field id="CMIP6_scldncl"       field_ref="dummy_XY"         /> <!-- P1 (m-3) number_concentration_of_stratiform_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top : Cloud Droplet Number Concentration of Stratiform Cloud Tops -->
+   <field id="CMIP6_sconcdust"     field_ref="sconcdust"        /> <!-- P1 (kg m-3) mass_concentration_of_dust_dry_aerosol_in_air : Surface Concentration of Dust -->
+   <field id="CMIP6_sconcso4"      field_ref="sconcso4"         /> <!-- P1 (kg m-3) mass_concentration_of_sulfate_dry_aerosol_in_air : Surface Concentration of SO4 -->
+   <field id="CMIP6_sconcss"       field_ref="sconcss"          /> <!-- P1 (kg m-3) mass_concentration_of_seasalt_dry_aerosol_in_air : Surface Concentration of Seasalt -->
+   <field id="CMIP6_sfcWind"       field_ref="wind10m"          />  <!-- P1 (m s-1) wind_speed : Near surface wind speed -->
+   <field id="CMIP6_sfcWindmax"    field_ref="sfcWindmax" freq_op="1d"   > @sfcWindmax </field> <!-- P1 (m s-1) wind_speed : Mean Daily Maximum Near-Surface Wind Speed --> 
+   <field id="CMIP6_sftlf"         field_ref="pourc_ter"> pourc_ter+pourc_lic </field> <!-- P1 (%) land_area_fraction : Land Area Fraction -->
+   <field id="CMIP6_siltfrac"      field_ref="dummy_not_provided"       /> <!-- P1 (1.0)  : Silt Fraction -->
+   <field id="CMIP6_smc"           field_ref="f_th"        /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_shallow_convective_mass_flux : The net mass flux represents the difference between the updraft and downdraft components.  For models with a distinct shallow convection scheme, this is calculated as convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->
+   <field id="CMIP6_snmsl"         field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux_into_soil_layer : surface_snow_melt_flux_into_soil_layer -->
+   <field id="CMIP6_snowmxrat"     field_ref="dummy_not_provided"         /> <!-- P2 (1.0) mass_fraction_of_snow_in_air : snow_mixing_ratio -->
+   <field id="CMIP6_snrefr"        field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : surface_snow_and_ice_refreezing_flux -->
+   <field id="CMIP6_snwc"          field_ref="dummy_not_provided"         /> <!-- P1 (kg m-2) canopy_snow_amount : canopy_snow_amount -->
+   <field id="CMIP6_solbnd"        field_ref="solbnd"         />  <!-- P1 (W m-2) solar_irradiance : Top-of-Atmosphere Solar Insolation for each band -->
+   <field id="CMIP6_swsffluxaero"  field_ref="dummy_not_provided"         /> <!-- P2 (W m-2) shortwave__flux_due_to_volcanic_aerosols_at__the_surface : downwelling shortwave  flux due to volcanic aerosols at  the surface to be diagnosed through double radiation call -->
+   <field id="CMIP6_swsrfasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) tendency_of_all_sky_surface_shortwave_flux_due_to_dust_ambient_aerosol_particles : All-sky Surface Shortwave radiative flux due to Dust -->
+   <field id="CMIP6_swsrfcsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) tendency_of_clear_sky_surface_shortwave_flux_due_to_dust_ambient_aerosol_particles : Clear-sky Surface Shortwave radiative flux due to Dust -->
+   <field id="CMIP6_swtoaasdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_shortwave_forcing : all sky sw-rf dust at toa -->
+   <field id="CMIP6_swtoacsdust"   field_ref="dummy_not_provided"         /> <!-- P1 (W m-2) toa_instantaneous_shortwave_forcing : clear sky sw-rf dust at toa -->
+   <field id="CMIP6_swtoafluxaerocs" field_ref="dummy_not_provided"       /> <!-- P1 (W m-2) shortwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling shortwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call -->
+   <field id="CMIP6_sza"           field_ref="sza"              /> <!-- P1 (degree) solar_zenith_angle : solar zenith angle -->
+   <field id="CMIP6_t2"            field_ref="temp"> temp*temp   </field> <!-- P2 (K2) square_of_air_temperature : square_of_air_temperature -->
+   <field id="CMIP6_ta"            field_ref="temp"             /> <!-- P1 (K) air_temperature : Air Temperature -->
+   <field id="CMIP6_tas_ist"       field_ref="t2m_lic"          /> <!-- P1 (K) air_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tas"           field_ref="t2m"              /> <!-- P1 (K) air_temperature : This is sampled synoptically. -->
+   <field id="CMIP6_tasmax"        field_ref="tasmax" freq_op="1d"> @tasmax </field> <!-- P1 (K) air_temperature : monthly mean of the daily-maximum near-surface air temperature. -->  
+   <field id="CMIP6_tasmaxCrop"    field_ref="dummy_not_provided"         /> <!-- P1 (K) air_temperature : Daily Maximum Near-Surface Air Temperature over Crop Tile -->
+   <field id="CMIP6_tasmin"        field_ref="tasmin" freq_op="1d"> @tasmin  </field> <!-- P1 (K) air_temperature : Daily Minimum Near-Surface Air Temperature -->  
+   <field id="CMIP6_tasminCrop"    field_ref="dummy_not_provided"         /> <!-- P1 (K) air_temperature : Daily Minimum Near-Surface Air Temperature over Crop Tile -->
+   <field id="CMIP6_tau_stress"    field_ref="taux"              >  sqrt( taux^2 + tauy^2)        </field> <!-- P1 (N m-2) surface_downward_stress : Momentum flux --> 
+   <field id="CMIP6_tauu"          field_ref="taux"             /> <!-- P1 (Pa) surface_downward_eastward_stress : Surface Downward Eastward Wind Stress -->
+   <field id="CMIP6_tauupbl"       field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_downward_eastward_stress_due_to_planetary_boundary_layer : surface -->
+   <field id="CMIP6_tauv"          field_ref="tauy"             /> <!-- P1 (Pa) surface_downward_northward_stress : Surface Downward Northward Wind Stress --> 
+   <field id="CMIP6_tauvpbl"       field_ref="dummy_XY"         /> <!-- P1 (Pa) surface_downward_northward_stress_due_to_planetary_boundary_layer : surface -->
+   <field id="CMIP6_tdps"          field_ref="pvap"> 273.16 + (273.16 - 35.86)/(17.269/log(pvap/611.14)-1.)      </field> <!-- P1 (K) dew_point_temperature : 2m dewpoint temperature -->
+   <field id="CMIP6_tendacabf"     field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_surface_mass_balance : Greenland -->
+   <field id="CMIP6_tendlibmassbf" field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_basal_mass_balance : Antarctica -->
+   <field id="CMIP6_tendlicalvf"   field_ref="dummy_not_provided"         /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_calving : Antarctica -->
+   <field id="CMIP6_tnhus"         field_ref="tnhus"            /> <!-- P1 (s-1) tendency_of_specific_humidity : Tendency of Specific Humidity -->
+   <field id="CMIP6_tnhusa"        field_ref="dqdyn"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_advection : Tendency of Specific Humidity due to Advection -->
+   <field id="CMIP6_tnhusc"        field_ref="tnhusc"           /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_convection : Tendencies from cumulus convection scheme. -->
+   <field id="CMIP6_tnhusd"        field_ref="dqvdf"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_diffusion : This includes any horizontal or vertical numerical moisture diffusion not associated with the parametrized moist physics or the resolved dynamics.  For example, any vertical diffusion which is part of the boundary layer mixing scheme should be excluded, as should any diffusion which is included in the terms from the resolved dynamics.   This term is required to check the closure of the moisture budget. -->
+   <field id="CMIP6_tnhusmp"       field_ref="dqphy"            /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_model_physics : This includes sources and sinks from parametrized moist physics (e.g. convection, boundary layer, stratiform condensation/evaporation, etc.) and excludes sources and sinks from resolved dynamics or from horizontal or vertical numerical diffusion not associated with model physicsl.  For example any diffusive mixing by the boundary layer scheme would be included. -->
+   <field id="CMIP6_tnhuspbl"      field_ref="dqvdf"             > dqvdf+dqthe </field> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_boundary_layer_mixing : alevel site time1 -->
+   <field id="CMIP6_tnhusscp"      field_ref="dqlscst"          /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_stratiform_clouds_and_precipitation : Tendency of Specific Humidity Due to Stratiform Clouds and Precipitation -->
+   <field id="CMIP6_tnhusscpbl"    field_ref="tnhusscpbl"       /> <!-- P1 (s-1) tendency_of_specific_humidity_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing : To be specified only in  models which do not separate budget terms for stratiform cloud, precipitation and boundary layer schemes.  Includes all bounday layer terms including and diffusive terms. -->
+   <field id="CMIP6_tnt"           field_ref="tnt"              /> <!-- P1 (K s-1) tendency_of_air_temperature : Tendency of Air Temperature -->
+   <field id="CMIP6_tnta"          field_ref="dtdyn"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_advection : Tendency of Air Temperature due to Advection -->
+   <field id="CMIP6_tntc"          field_ref="tntc"             /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_convection : zonal mean; hence YZT -->
+   <field id="CMIP6_tntd"          field_ref="dtajs"             > dtajs+dtoro+dtlif+dthin </field> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_numerical_diffusion : Tendency of Air Temperature due to Numerical Diffusion -->
+   <field id="CMIP6_tntmp"         field_ref="dtphy"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_model_physics : This includes sources and sinks from parametrized physics (e.g. radiation, convection, boundary layer, stratiform condensation/evaporation, etc.). It excludes sources and sinks from resolved dynamics and numerical diffusion not associated with parametrized physics.  For example, any vertical diffusion which is part of the boundary layer mixing scheme should be included, while numerical diffusion applied in addition to physics or resolved dynamics should be excluded.  This term is required to check the closure of the heat budget. -->
+   <field id="CMIP6_tntnogw"       field_ref="dummy_XYA"        /> <!-- P2 (K s-1) temperature_tendency_due_to_dissipation_nonorographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_tntogw"        field_ref="dtoro"            /> <!-- P2 (K s-1) temperature_tendency_due_to_dissipation_orographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_tntpbl"        field_ref="dtvdf"             > dtvdf + dtthe </field> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_boundary_layer_mixing : alevel site time1 -->
+   <field id="CMIP6_tntr"          field_ref="tntr"             /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_radiative_heating : Tendency of Air Temperature due to Radiative Heating -->
+   <field id="CMIP6_tntrlcs"       field_ref="dtlw0"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_longwave_heating_assuming_clear_sky : zonal mean; hence YZT -->
+   <field id="CMIP6_tntrscs"       field_ref="dtsw0"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_shortwave_heating_assuming_clear_sky : zonal mean; hence YZT -->
+   <field id="CMIP6_tntscp"        field_ref="dtlschr"          /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_stratiform_clouds_and_precipitation : alevel site time1 -->
+   <field id="CMIP6_tntscpbl"      field_ref="tntscpbl"         /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixing : To be specified only in  models which do not separate cloud, precipitation and boundary layer terms.  Includes all boundary layer terms including diffusive ones. -->
+   <field id="CMIP6_tr"            field_ref="tsol"             /> <!-- P1 (K) surface_temperature : Surface Radiative Temperature -->
+   <field id="CMIP6_ts"            field_ref="tsol"             /> <!-- P1 (K) surface_temperature : Surface temperature (skin for open ocean) -->
+   <field id="CMIP6_ts_ist"        field_ref="tsol_lic"         /> <!-- P1 (K) surface_temperature : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsns"          field_ref="dummy_not_provided"         /> <!-- P1 (K) surface_temperature : Snow Surface Temperature -->
+   <field id="CMIP6_twap"          field_ref="vitw">vitw*temp </field> <!-- P2 (K Pa s-1) product_of_omega_and_air_temperature : air_temperature_times_omega -->
+   <field id="CMIP6_u2"            field_ref="vitu"              > vitu*vitu</field> <!-- P2 (m2 s-2) square_of_eastward_wind : square_of_eastward_wind -->
+   <field id="CMIP6_ua"            field_ref="vitu"             /> <!-- P1 (m s-1) eastward_wind : Eastward Wind -->
+   <field id="CMIP6_uas"           field_ref="u10m"             /> <!-- P1 (m s-1) eastward_wind : Eastward Near-Surface Wind -->
+   <field id="CMIP6_uqint"         field_ref="uq"               /> <!-- P1 (m2 s-1) integral_of_product_of_eastward_wind_and_specific_humidity_wrt_height : Eastward integrated moisture transport -->
+   <field id="CMIP6_ut"            field_ref="vitu"              > vitu*temp </field> <!-- P2 (K m s-1) product_of_eastward_wind_and_air_temperature : air_temperature_times_eastward_wind -->
+   <field id="CMIP6_utendepfd"     field_ref="dummy_XYA"        /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_eliassen_palm_flux_divergence : Called "acceldivf" in CCMI table; we suggest new name. zonal mean; hence YZT -->
+   <field id="CMIP6_utendnogw"     field_ref="du_gwd_rando"> du_gwd_rando + du_gwd_front </field> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_nonorographic_gravity_wave_drag : zonal mean; hence YZT -->
+   <field id="CMIP6_utendogw"      field_ref="duoro"        /> <!-- P1 (m s-2) tendency_of_eastward_wind_due_to_orographic_gravity_wave_drag : u-tendency orographic gravity wave drag -->
+   <field id="CMIP6_utendvtem"     field_ref="dummy_XYA"        /> <!-- P1 (m s-1 d-1) u-tendency_by_wstar_advection : zonal mean; hence YZT -->
+   <field id="CMIP6_utendwtem"     field_ref="dummy_XYA"        /> <!-- P1 (m s-1 d-1) u-tendency_by_vstar_advection : zonal mean; hence YZT -->
+   <field id="CMIP6_uv"            field_ref="vitu"> vitu*vitv  </field> <!-- P2 (m2 s-2) product_of_eastward_wind_and_northward_wind : eastward_wind_times_northward_wind -->
+   <field id="CMIP6_uwap"          field_ref="vitu"> vitu*vitw  </field> <!-- P2 (Pa m s-2) product_of_eastward_wind_and_omega : eastward_wind_times_omega -->
+   <field id="CMIP6_v2"            field_ref="vitv"> vitv*vitv  </field> <!-- P2 (m2 s-2) square_of_northward_wind : square_of_northwardwind -->
+   <field id="CMIP6_va"            field_ref="vitv"             /> <!-- P1 (m s-1) northward_wind : Northward Wind -->
+   <field id="CMIP6_vas"           field_ref="v10m"             /> <!-- P1 (m s-1) northward_wind : Northward Near-Surface Wind -->
+   <field id="CMIP6_vortmean"      field_ref="dummy_XY"         /> <!-- P1 (s-1) atmosphere_relative_vorticity : Mean vorticity over 850-600 hPa layer -->
+   <field id="CMIP6_vqint"         field_ref="vq"               /> <!-- P1 (m2 s-1) integral_of_product_of_northward_wind_and_specific_humidity_wrt_height : Northward integrated moisture transport -->
+   <field id="CMIP6_vt"            field_ref="vitv"> vitv*temp  </field> <!-- P2 (K m s-1) product_of_northward_wind_and_air_temperature : air_temperature_times_northward_wind -->
+   <field id="CMIP6_vtem"          field_ref="dummy_XYA"        /> <!-- P1 (m s-1) northward_transformed_eulerian_mean_air_velocity : Transformed Eulerian Mean northward wind --> 
+   <field id="CMIP6_vtendnogw"     field_ref="dv_gwd_rando">dv_gwd_rando + dv_gwd_front </field> <!-- P2 (m s-2) tendency_of_northward_wind_due_to_nonorographic_gravity_wave_drag : v-tendency nonorographic gravity wave drag -->
+   <field id="CMIP6_vtendogw"      field_ref="dvoro"        /> <!-- P2 (m s-2) tendency_of_northward_wind_due_to_orographic_gravity_wave_drag : v-tendency orographic gravity wave drag -->
+   <field id="CMIP6_vwap"          field_ref="vitv"> vitv*vitw  </field> <!-- P2 (Pa m s-2) product_of_northward_wind_and_omega : northward_wind_times_omega -->
+   <field id="CMIP6_wap"           field_ref="vitw"             /> <!-- P1 (Pa s-1) lagrangian_tendency_of_air_pressure : commonly referred to as "omega", this represents the vertical component of velocity in pressure coordinates (positive down) -->
+   <field id="CMIP6_wap2"          field_ref="vitw"> vitw*vitw  </field> <!-- P2 (Pa2 s-2) square_of_lagrangian_tendency_of_air_pressure : square_of_omega -->
+   <field id="CMIP6_wbptemp"       field_ref="dummy_XYA"        /> <!-- P1 (K) wet_bulb_potential_temperature : plev_7 -->
+   <field id="CMIP6_wtem"          field_ref="dummy_XYA"        /> <!-- P1 (m s-1)  : Transformed Eulerian Mean upward wind -->
+   <field id="CMIP6_xgwdparam"     field_ref="east_gwstress"    /> <!-- P2 (Pa) atmosphere_eastward_stress_due_to_gravity_wave_drag : x_gravity_wave_drag_param --> 
+   <field id="CMIP6_ygwdparam"     field_ref="west_gwstress"    /> <!-- P2 (Pa) atmosphere_northward_stress_due_to_gravity_wave_drag : y_gravity_wave_drag_param -->
+   <field id="CMIP6_zfull"         field_ref="zfull"            /> <!-- P2 (m) height_above_reference_ellipsoid : This is actual height above mean sea level, not geopotential height -->
+   <field id="CMIP6_zg"            field_ref="geoph"            /> <!-- P1 (m) geopotential_height : Geopotential height on the 1000 hPa surface -->
+   <field id="CMIP6_zhalf"         field_ref="zhalf"            /> <!-- P2 (m) height_above_reference_ellipsoid : This is actual height above mean sea level, not geopotential height.  This is actual height above mean sea level, not geopotential height.  Includes both the top of the model atmosphere and surface levels. -->
+   <field id="CMIP6_zmla"          field_ref="s_pblh"           /> <!-- P1 (m) atmosphere_boundary_layer_thickness : Height of Boundary Layer -->
+   <field id="CMIP6_zmlwaero"      field_ref="dummy_not_provided"        /> <!-- P1 (K s-1) longwave_heating_rate_due_to_volcanic_aerosols : longwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required -->
+   <field id="CMIP6_zmswaero"      field_ref="dummy_not_provided"        /> <!-- P1 (K s-1) shortwave_heating_rate_due_to_volcanic_aerosols : shortwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required -->
+   <field id="CMIP6_zmtnt"         field_ref="dtphy"            /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_diabatic_processes : Zonal Mean Diabatic Heating Rates -->
+   <field id="CMIP6_ap" field_ref="Ahyb" /><!-- Ap hybrid coordinate array for level interfaces -->
+   <field id="CMIP6_ap_bnds" field_ref="Ahyb_bounds" /><!-- Ap hybrid coordinate bounds -->
+   <field id="CMIP6_b" field_ref="Bhyb" /><!-- Bp hybrid coordinate array for level interfaces -->
+   <field id="CMIP6_b_bnds" field_ref="Bhyb_bounds" /><!-- Bp hybrid coordinate bounds -->
+   <field id="CMIP6_ahp" field_ref="Ahyb_mid" /><!-- Aps hybrid coordinate array for mid-levels -->
+   <field id="CMIP6_ahp_bnds" field_ref="Ahyb_mid_bounds" /><!-- Aps hybrid coordinate bounds -->
+   <field id="CMIP6_bh" field_ref="Bhyb_mid" /><!-- Bps hybrid coordinate array for mid-levels -->
+   <field id="CMIP6_bh_bnds" field_ref="Bhyb_mid_bounds" /><!-- Bps hybrid coordinate bounds -->
+
+
+
+<!-- for variables which realm equals one of _aerosol-->
+   <field id="CMIP6_abs550aer"     field_ref="abs550aer"         /> <!-- P1 (1.0) atmosphere_absorption_optical_thickness_due_to_ambient_aerosol : Ambient Aerosol Absorption Optical Thickness at 550 nm -->
+   <field id="CMIP6_airmass"       field_ref="mass"        /> <!-- P1 (kg m-2) atmosphere_mass_of_air_per_unit_area : Vertically integrated mass content of air in layer -->
+   <field id="CMIP6_aoanh"         field_ref="dummy_XYA"        /> <!-- P1 (yr) tracer_lifetime : Fixed surface layer mixing ratio over 30o-50oN (0 ppbv), uniform fixed source (at all levels) everywhere else (source is unspecified but must be constant in space and time and documented). Note that the source could be 1yr/yr, so the tracer concentration provides mean age in years. For method using linearly increasing tracer include a method attribute: "linearly increasing tracer"For method using uniform source (1yr/yr) include a method attribute: "uniform source" -->
+   <field id="CMIP6_bldep"         field_ref="dummy_XY"         /> <!-- P3 (m) atmosphere_boundary_layer_thickness : Boundary layer depth -->
+   <field id="CMIP6_bry"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_inorganic_bromine_in_air : Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Bry = Br + BrO + HOBr + HBr + BrONO2 + BrCl Definition: Total inorganic bromine (e.g., HBr and inorganic bromine oxides and radicals (e.g., BrO, atomic bromine (Br), bromine nitrate (BrONO2)) resulting from degradation of bromine-containing organic source gases (halons, methyl bromide, VSLS), and natural inorganic bromine sources (e.g., volcanoes, sea salt, and other aerosols) add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_bs550aer"      field_ref="dummy_XYA"        /> <!-- P1 (m-1 sr-1) volume_lidar_backwards_scattering_coefficient_in_air_due_to_ambient_aerosol_particles : Aerosol  Backscatter at 550nm and 180 degrees, computed from extinction and lidar ratio -->
+   <field id="CMIP6_c2h2"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ethyne_in_air : C2H2 volume mixing ratio -->
+   <field id="CMIP6_c2h6"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ethane_in_air : C2H6 volume mixing ratio -->
+   <field id="CMIP6_c3h6"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_propene_in_air : C3H6  volume mixing ratio -->
+   <field id="CMIP6_c3h8"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_propane_in_air : C3H8  volume mixing ratio -->
+   <field id="CMIP6_ccn"           field_ref="dummy_XY"         /> <!-- P1 (m-3) number_concentration_of_cloud_condensation_nuclei_at_stp_in_air : proposed name: number_concentration_of_ambient_aerosol_in_air_at_liquid_water_cloud_top -->
+   <field id="CMIP6_cdnc"          field_ref="scdnc" expr="@scdnc / @lcc3d " > scdnc / lcc3d        </field><!-- P1 (m-3) number_concentration_of_cloud_liquid_water_particles_in_air : Cloud Droplet Number Concentration in liquid water clouds. -->
+   <field id="CMIP6_ch3coch3"      field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_acetone_in_air : CH3COCH3  volume mixing ratio -->
+   <field id="CMIP6_cheaqpso4"     field_ref="dummy_XYA"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_aqueous_phase_net_chemical_production : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_aqueous_phase_net_chemical_production -->
+   <field id="CMIP6_chegpso4"      field_ref="dummy_XYA"        /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_gaseous_phase_net_chemical_production : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_gas_phase_net_chemical_production -->
+   <field id="CMIP6_chepasoa"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : anthropogenic part of chepsoa -->
+   <field id="CMIP6_chepsoa"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production : If model lumps SOA emissions with POA, then the sum of POA and SOA emissions is reported as OA emissions. ""mass"" refers to the mass of primary organic matter, not mass of organic carbon alone. -->
+   <field id="CMIP6_cly"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_inorganic_chlorine_in_air : Total family (the sum of all appropriate species in the model) ; list the species in the netCDF header, e.g. Cly = HCl + ClONO2 + HOCl + ClO + Cl + 2*Cl2O2 +2Cl2 + OClO + BrCl Definition: Total inorganic stratospheric chlorine (e.g., HCl, ClO) resulting from degradation of chlorine-containing source gases (CFCs, HCFCs, VSLS), and natural inorganic chlorine sources (e.g., sea salt and other aerosols) add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_co"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_carbon_monoxide_in_air : CO volume mixing ratio -->
+   <field id="CMIP6_cod"           field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_cloud : Cloud Optical Depth -->
+   <field id="CMIP6_depdust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_total_deposition : Balkanski - LSCE -->
+   <field id="CMIP6_dms"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_dimethyl_sulfide_in_air : DMS volume mixing ratio -->
+   <field id="CMIP6_drybc"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_dry_deposition : Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_drydust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_dry_deposition : Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_drynh3"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_drynh4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_drynoy"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_dry_deposition : NOy is the sum of all simulated oxidized nitrogen species out of NO, NO2, HNO3, HNO4, NO3aerosol, NO3(radical), N2O5, PAN, other organic nitrates. Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_dryo3"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_dryoa"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_dry_deposition : Tendency of atmosphere mass content of organic dry aerosol due to dry deposition: This is the sum of dry deposition of POA and dry deposition of SOA (see next two entries). 'Mass' refers to the mass of organic matter, not mass of organic carbon alone.  We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available. Was called dry_pom in old ACCMIP Excel table. Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_dryso2"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_dryso4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_dry_deposition : dry deposition includes gravitational settling, impact scavenging, and turbulent deposition -->
+   <field id="CMIP6_dryss"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_dry_deposition : Dry deposition includes gravitational settling, impact scavenging, and turbulent deposition. -->
+   <field id="CMIP6_ec550aer"      field_ref="ec550aer"        /> <!-- P1 (m-1) volume_extinction_coefficient_in_air_due_to_ambient_aerosol_particles : Aerosol Extinction at 550nm -->
+   <field id="CMIP6_emiaco"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : anthrophogenic  emission of CO -->
+   <field id="CMIP6_emianox"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : Store flux as Nitrogen. Anthropogenic fraction. NOx=NO+NO2, Includes agricultural waste burning but no other biomass burning. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiaoa"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : anthropogenic part of emioa -->
+   <field id="CMIP6_emibc"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emibvoc"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_biogenic_nmvoc_expressed_as_carbon_due_to_emission : Integrate 3D emission field vertically to 2d field._If_ fixed molecular weight of NMVOC is not available in model, please provide in units of kilomole m-2 s-1 (i.e. kg m-2 s-1 as if model NMVOC had molecular weight of 1) and add a comment to your file. -->
+   <field id="CMIP6_emico"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emidms"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emidust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiisop"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_isoprene_due_to_emission : Integrate 3D emission field vertically to 2d field -->
+   <field id="CMIP6_emilnox"       field_ref="dummy_XYA"        /> <!-- P1 (mol s-1) tendency_of_atmosphere_moles_of_nox_expressed_as_nitrogen : Integrate the NOx production for lightning over model layer. proposed name: tendency_of_atmosphere_mass_content_of_nox_from_lightning -->
+   <field id="CMIP6_eminh3"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_eminox"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission : NOx=NO+NO2. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emioa"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission : This is the sum of total emission of POA and total production of SOA (emipoa+chepsoa). ""Mass"" refers to the mass of organic matter, not mass of organic carbon alone. We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available.  Integrate 3D chemical production and emission field vertically to 2d field. -->
+   <field id="CMIP6_emiso2"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiso4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_emission : Direct primary emission does not include secondary sulfate production. Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emiss"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_emission : Integrate 3D emission field vertically to 2d field. -->
+   <field id="CMIP6_emivoc"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission : Integrate 3D emission field vertically to 2d field. _If_ fixed molecular weight of NMVOC is not available in model, please provide in units of kilomole m-2 s-1 (i.e. kg m-2 s-1 as if model NMVOC had molecular weight of 1) and add a comment to your file. -->
+   <field id="CMIP6_hcho"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_formaldehyde_in_air : Formaldehyde volume mixing ratio -->
+   <field id="CMIP6_hcl"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydrogen_chloride_in_air : HCl volume mixing ratio -->
+   <field id="CMIP6_hno3"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitric_acid_in_air : HNO3 volume mixing ratio -->
+   <field id="CMIP6_ho2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydroperoxyl_radical_in_air : HO2 volume mixing ratio -->
+   <field id="CMIP6_isop"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_isoprene_in_air : Isoprene volume mixing ratio -->
+   <field id="CMIP6_jno2"          field_ref="dummy_XYA"        /> <!-- P1 (s-1) photolysis_rate_of_nitrogen_dioxide : photolysis rate of NO2 -->
+   <field id="CMIP6_lossch4"       field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_methane_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lossco"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_of_mole_concentration_of_carbon_monoxide_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lossn2o"       field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_of_mole_concentration_of_nitrous_oxide_due_to_chemical_destruction : monthly averaged atmospheric loss -->
+   <field id="CMIP6_lwp"           field_ref="cldq"         /> <!-- P1 (kg m-2) atmosphere_mass_content_of_cloud_liquid_water : liquid water path -->
+   <field id="CMIP6_maxpblz"       field_ref="dummy_XY"         /> <!-- P1 (m) atmosphere_boundary_layer_thickness : maximum boundary layer height during the day (add cell_methods attribute: "time: maximum") -->
+   <field id="CMIP6_meanage"       field_ref="dummy_XYA"        /> <!-- P1 (yr) age_of_stratospheric_air : The mean age of air is defined as the mean time that a stratospheric air mass has been out of contact with the well-mixed troposphere. -->
+   <field id="CMIP6_minpblz"       field_ref="dummy_XY"         /> <!-- P1 (m) atmosphere_boundary_layer_thickness : minimum boundary layer height during the day (add cell_methods attribute: "time: minimum") -->
+   <field id="CMIP6_mmraerh2o"     field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_water_in_ambient_aerosol_particles_in_air : Aerosol water mass mixing ratio -->
+   <field id="CMIP6_mmrbc"         field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_elemental_carbon_dry_aerosol_particles_in_air : Elemental carbon mass mixing ratio -->
+   <field id="CMIP6_mmrdust"       field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_dust_dry_aerosol_particles_in_air : Dust aerosol mass mixing ratio -->
+   <field id="CMIP6_mmrnh4"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_ammonium_dry_aerosol_particles_in_air : NH4 mass mixing ratio -->
+   <field id="CMIP6_mmrno3"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_nitrate_dry_aerosol_particles_in_air : NO3 aerosol mass mixing ratio -->
+   <field id="CMIP6_mmroa"         field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_particulate_organic_matter_dry_aerosol_particles_in_air : We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available. -->
+   <field id="CMIP6_mmrpm1"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_pm1_dry_aerosol_particles_in_air : E.g. mass_fraction_of_pm1_aerosol_at_50_percent_relative_humidity_in_air. proposed name:  mass_fraction_of_pm1_dry_aerosol_in_air -->
+   <field id="CMIP6_mmrpm10"       field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_pm10_ambient_aerosol_particles_in_air : E.g. mass_fraction_of_pm10_aerosol_at_50_percent_relative_humidity_in_air, proposed name: mass_fraction_of_pm10_dry_aerosol_in_air -->
+   <field id="CMIP6_mmrpm2p5"      field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_dry_aerosol_particles_in_air : E.g. mass_fraction_of_pm2p5_aerosol_at_50_percent_relative_humidity_in_air, proposed_name: mass_fraction_of_pm2p5_dry_aerosol_in_air -->
+   <field id="CMIP6_mmrso4"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_sulfate_dry_aerosol_particles_in_air : Aerosol sulfate mass mixing ratio -->
+   <field id="CMIP6_mmrsoa"        field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_secondary_particulate_organic_matter_dry_aerosol_particles_in_air : Secondary organic aerosol mass mixing ratio -->
+   <field id="CMIP6_mmrss"         field_ref="dummy_XYA"        /> <!-- P1 (kg kg-1) mass_fraction_of_seasalt_dry_aerosol_particles_in_air : Sea Salt mass mixing ratio -->
+   <field id="CMIP6_nh50"          field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_artificial_tracer_with_fixed_lifetime_in_air : Fixed surface layer mixing ratio over 30o-50oN (100ppbv), uniform fixed 50-day exponential decay. -->
+   <field id="CMIP6_no"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_monoxide_in_air : NO volume mixing ratio -->
+   <field id="CMIP6_no2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 volume mixing ratio -->
+   <field id="CMIP6_noy"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_noy_expressed_as_nitrogen_in_air : Total family (the sum of all appropriate species in the model); list the species in the netCDF header, e.g. NOy = N + NO + NO2 + NO3 + HNO3 + 2N2O5 + HNO4 + ClONO2 + BrONO2 Definition: Total reactive nitrogen; usually includes atomic nitrogen (N), nitric oxide (NO), NO2, nitrogen trioxide (NO3), dinitrogen radical (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), BrONO2, ClONO2 add comment attribute with detailed description about how the model calculates these fields -->
+   <field id="CMIP6_o3loss"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_destruction : ONLY provide the sum of the following reactions: (i) O(1D)+H2O; (ii) O3+HO2; (iii) O3+OH; (iv) O3+alkenes (isoprene, ethene,...) -->
+   <field id="CMIP6_o3prod"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_production : ONLY provide the sum of all the HO2/RO2 + NO reactions (as k*[HO2]*[NO]) -->
+   <field id="CMIP6_o3ste"         field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Ozone tracer intended to map out strat-trop exchange (STE) of ozone. -->
+   <field id="CMIP6_od440aer"      field_ref="od443aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 440 nm" -->
+   <field id="CMIP6_od550aer"      field_ref="od550aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 550 nm" -->
+   <field id="CMIP6_od550aerh2o"   field_ref="od550aer"   >  od550aer-dryod550aer   </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_water_in_ambient_aerosol : proposed name: atmosphere_optical_thickness_due_to_water_ambient_aerosol -->
+   <field id="CMIP6_od550bb"       field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : total organic aerosol AOD due to biomass burning (excluding so4, nitrate BB components) -->
+   <field id="CMIP6_od550bc"       field_ref="od550_ASBCM"  >  od550_ASBCM + od550_AIBCM   </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_black_carbon_ambient_aerosol : black carbon aod at 550nm -->
+   <field id="CMIP6_od550csaer"    field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols in clear skies if od550aer is for all-sky (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 550 nm" -->
+   <field id="CMIP6_od550dust"     field_ref="od550_CIDUSTM"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_dust_ambient_aerosol : Dust Optical Depth at 550nm -->
+   <field id="CMIP6_od550lt1aer"   field_ref="od550lt1aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_pm1_ambient_aerosol : od550 due to particles with wet diameter less than 1 um  (ambient here means wetted). When models do not include explicit size information, it can be assumed that all anthropogenic aerosols and natural secondary aerosols have diameter less than 1 um. -->
+   <field id="CMIP6_od550no3"      field_ref="od550_ASNO3M" >  od550_ASNO3M + od550_CSNO3M + od550_CINO3M   </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_nitrate_ambient_aerosol : proposed name: atmosphere_optical_thickness_due_to_nitrate_ambient_aerosol -->
+   <field id="CMIP6_od550oa"       field_ref="od550_ASPOMM"   >   od550_ASPOMM + od550_AIPOMM </field>   <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : Total Organic Aerosol Optical Depth at 550nm -->
+   <field id="CMIP6_od550so4"      field_ref="od550_ASSO4M"   >   od550_ASSO4M+od550_CSSO4M  </field>  <!-- P1 (1.0) atmosphere_optical_thickness_due_to_sulfate_ambient_aerosol : proposed name: atmosphere_optical_thickness_due_to_sulfate_ambient_aerosol -->
+   <field id="CMIP6_od550soa"      field_ref="dummy_XY"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol : total organic aerosol AOD due to secondary aerosol formation -->
+   <field id="CMIP6_od550ss"       field_ref="od550_ASSSM" >  od550_ASSSM+od550_CSSSM+od550_SSSSM    </field> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_seasalt_ambient_aerosol : Sea Salt Aersol Optical Depth at 550nm -->
+   <field id="CMIP6_od870aer"      field_ref="od865aer"         /> <!-- P1 (1.0) atmosphere_optical_thickness_due_to_ambient_aerosol_particles : AOD from the ambient aerosols (i.e., includes aerosol water).  Does not include AOD from stratospheric aerosols if these are prescribed but includes other possible background aerosol types. Needs a comment attribute "wavelength: 870 nm" -->
+   <field id="CMIP6_oh"            field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_hydroxyl_radical_in_air : OH volume mixing ratio -->
+   <field id="CMIP6_pan"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_peroxyacetyl_nitrate_in_air : PAN volume mixing ratio -->
+   <field id="CMIP6_photo1d"       field_ref="dummy_XYA"        /> <!-- P1 (s-1) photolysis_rate_of_ozone_to_1D_oxygen_atom : proposed name: photolysis_rate_of_ozone_to_O1D -->
+   <field id="CMIP6_pod0"          field_ref="dummy_XY"         /> <!-- P1 (mol m-2 s-1) pending_CF_name : Accumulated stomatal ozone flux over the threshold of 0 mol m-2 s-1; Computation: Time Integral of (hourly above canopy ozone concentration * stomatal conductance * Rc/(Rb+Rc) ) -->
+   <field id="CMIP6_ptp"           field_ref="p_tropopause"         /> <!-- P1 (Pa) tropopause_air_pressure : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+   <field id="CMIP6_reffclwtop"    field_ref="reffclwtop"         /> <!-- P1 (m) effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_top : Droplets are liquid only.  This is the effective radius as seen from space over liquid cloudy portion of grid cell. This is the value from uppermost model layer with liquid cloud or, if available, or for some models it is the sum over all liquid cloud tops, no matter where they occur, as long as they are seen from the top of the atmosphere.TOA) each time sample when computing monthly mean. Reported values are weighted by total liquid cloud top fraction of  (as seen from -->
+   <field id="CMIP6_rlutaf"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux : Flux corresponding to rlut resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rlutcsaf"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_longwave_flux_assuming_clear_sky : Flux corresponding to rlutcs resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rsutaf"        field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux : Flux corresponding to rsut resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_rsutcsaf"      field_ref="dummy_XY"         /> <!-- P1 (W m-2) toa_outgoing_shortwave_flux_assuming_clear_sky : Flux corresponding to rsutcs resulting from aerosol-free call to radiation, following Ghan (ACP, 2013) -->
+   <field id="CMIP6_sedustCI"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_sedimentation : Balkanski - LSCE -->
+   <field id="CMIP6_sfno2"         field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_nitrogen_dioxide_in_air : NO2 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfo3"          field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : O3 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfo3max"       field_ref="dummy_XY"         /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_in_air : Daily maximum O3 volume mixing ratio in lowest model layer -->
+   <field id="CMIP6_sfpm25"        field_ref="dummy_XY"         /> <!-- P1 (kg kg-1) mass_fraction_of_pm2p5_ambient_aerosol_particles_in_air : PM2.5 mass mixing ratio in lowest model layer -->
+   <field id="CMIP6_so2"           field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_sulfur_dioxide_in_air : SO2 volume mixing ratio -->
+   <field id="CMIP6_tatp"          field_ref="t_tropopause"         /> <!-- P1 (K) tropopause_air_temperature : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+   <field id="CMIP6_tntrl"         field_ref="dummy_XYA"        /> <!-- P3 (K s-1) tendency_of_air_temperature_due_to_longwave_heating : Tendency of air temperature due to longwave radiative heating -->
+   <field id="CMIP6_tntrs"         field_ref="dummy_XYA"        /> <!-- P3 (K s-1) tendency_of_air_temperature_due_to_shortwave_heating : Tendency of air temperature due to shortwave radiative heating -->
+   <field id="CMIP6_toz"           field_ref="dummy_XY"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Total ozone column calculated at 0 degrees C and 1 bar, such that 1m = 1e5 DU. -->
+   <field id="CMIP6_tropoz"        field_ref="dummy_XY"         /> <!-- P1 (m) equivalent_thickness_at_stp_of_atmosphere_ozone_content : Tropospheric ozone column, should be consistent with definition of tropopause used to calculate the pressure of the tropopause (ptp). Calculated at 0 degrees C and 1 bar, such that 1m = 1e5 DU. -->
+   <field id="CMIP6_ttop"          field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature_at_cloud_top : air temperature at cloud top -->
+   <field id="CMIP6_wa"            field_ref="dummy_XYA"        /> <!-- P1 (m s-1) upward_air_velocity : Upward Air Velocity -->
+   <field id="CMIP6_wetbc"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of black carbon aerosol mass -->
+   <field id="CMIP6_wetdust"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of dust -->
+   <field id="CMIP6_wetnh3"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonia_due_to_wet_deposition : wet deposition rate of nh3 -->
+   <field id="CMIP6_wetnh4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of nh4 -->
+   <field id="CMIP6_wetnoy"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_wet_deposition : NOy is the sum of all simulated oxidized nitrogen species, out of NO, NO2, HNO3, HNO4, NO3aerosol, NO3(radical), N2O5, PAN, other organic nitrates. -->
+   <field id="CMIP6_wetoa"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_wet_deposition : tendency of atmosphere mass content of organic matter dry aerosols due to wet deposition: This is the sum of wet deposition of POA and wet deposition of SOA (see next two entries). Mass here refers to the mass of organic matter, not mass of organic carbon alone. We recommend a scale factor of POM=1.4*OC, unless your model has more detailed info available. Was called wet_pom in old ACCMIP Excel spreadsheet. -->
+   <field id="CMIP6_wetso2"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_wet_deposition : wet deposition rate of so2 -->
+   <field id="CMIP6_wetso4"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_wet_deposition : proposed name: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_wet_deposition -->
+   <field id="CMIP6_wetss"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_wet_deposition : wet deposition rate of seasalt -->
+   <field id="CMIP6_ztp"           field_ref="z_tropopause"         /> <!-- P1 (m) tropopause_altitude : 2D monthly mean thermal tropopause calculated using WMO tropopause definition on 3d temperature -->
+
+
+<!-- for variables which realm equals one of _atmosChem-->
+   <field id="CMIP6_flashrate"     field_ref="dummy_XY"         /> <!-- P1 (km-2 s-1) lightning_flash_rate : proposed name: lightning_flash_rate (units to be interpreted as "counts km-2 s-1) -->
+   <field id="CMIP6_oxloss"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom_due_to_chemical_destruction : total chemical loss rate for o+o1d+o3 -->
+   <field id="CMIP6_oxprod"        field_ref="dummy_XYA"        /> <!-- P1 (mol m-3 s-1) tendency_of_mole_concentration_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom_due_to_chemical_production_and_photolysis : total production rate of o+o1d+o3 including o2 photolysis and all o3 producing reactions -->
+   <field id="CMIP6_vmrox"         field_ref="dummy_XYA"        /> <!-- P1 (mol mol-1) mole_fraction_of_ozone_and_atomic_oxygen_and_1D_oxygen_atom : Mole Fraction of Ox -->
+
+
+<!-- for variables which realm equals one of _landIce-->
+   <field id="CMIP6_acabf"         field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_surface_specific_mass_balance_flux : quantity averaged over ice sheet only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_acabfIs"       field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_surface_specific_mass_balance_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_agesno"        field_ref="dummy_XY"         /> <!-- P1 (day) age_of_surface_snow : When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.  Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_hfdsn"         field_ref="dummy_XY"         /> <!-- P1 (W m-2) surface_downward_heat_flux_in_snow : the net downward heat flux from the atmosphere into the snow that lies on land divided by the land area in the grid cell; reported as missing for snow-free land regions or where the land fraction is 0. -->
+   <field id="CMIP6_hfgeoubed"     field_ref="dummy_XY"         /> <!-- P3 (W m-2) upward_geothermal_heat_flux_at_ground_level_in_land_ice : Geothermal Heat flux beneath land ice -->
+   <field id="CMIP6_hfgeoubed_ist" field_ref="dummy_XY"         /> <!-- P3 (W m-2) upward_geothermal_heat_flux_at_ground_level_in_land_ice : Geothermal Heat flux beneath land ice -->
+   <field id="CMIP6_hflsIs"        field_ref="lat_lic" > -1.0 * lat_lic </field> <!-- P1 (W m-2) surface_upward_latent_heat_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_hfssIs"        field_ref="sens_lic" > -1.0 * sens_lic </field> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_icem"          field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_surface_melt_flux : Surface ice melt flux -->
+   <field id="CMIP6_icemIs"        field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_surface_melt_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_libmassbffl"   field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_basal_specific_mass_balance_flux : quantity averaged over floating ice shelf -->
+   <field id="CMIP6_libmassbfgr"   field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) land_ice_basal_specific_mass_balance_flux : quantity averaged over grounded ice sheet -->
+   <field id="CMIP6_licalvf"       field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_specific_mass_flux_due_to_calving : Land ice calving flux -->
+   <field id="CMIP6_lifmassbf"     field_ref="dummy_XY"         /> <!-- P3 (kg m-2 s-1) land_ice_specific_mass_flux_due_to_calving_and_ice_front_melting : Land ice vertical front mass balance flux -->
+   <field id="CMIP6_litempbotfl"   field_ref="dummy_XY"         /> <!-- P2 (K) land_ice_basal_temperature : quantity averaged over floating land ice -->
+   <field id="CMIP6_litempbotgr"   field_ref="dummy_XY"         /> <!-- P2 (K) land_ice_basal_temperature : quantity averaged over grounded land ice -->
+   <field id="CMIP6_litemptop"     field_ref="dummy_XY"         /> <!-- P2 (K) temperature_at_top_of_ice_sheet_model : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_litemptopIs"   field_ref="dummy_XY"         /> <!-- P2 (K) temperature_at_top_of_ice_sheet_model : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_lithk_ist"     field_ref="dummy_XY"         /> <!-- P2 (m) land_ice_thickness : This is needed in case ice sheet thickness changes in time -->
+   <field id="CMIP6_lwsnl"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_snow_layer : where land over land: this is computed as the total mass of liquid water contained interstitially within the snow layer of the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_modelCellAreai" field_ref="dummy_XY"         /> <!-- P1 (m2) cell_area : When interpolated to a regular grid, it should be interpolated (not summed) with a conservative scheme to preserve total area -->
+   <field id="CMIP6_mrfso"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2) soil_frozen_water_content : the mass (summed over all all layers) of frozen water. -->
+   <field id="CMIP6_mrroIs"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) runoff_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_orogIs"        field_ref="phis" > phis / 9.81  </field>  <!-- P1 (m) surface_altitude : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_pflw"          field_ref="dummy_XY"         /> <!-- P1 (kg m-2) liquid_water_content_of_permafrost_layer : "where land over land", i.e., this is the total mass of liquid water contained within the permafrost layer within the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_prraIs"        field_ref="rain_fall" /> <!-- P1 (kg m-2 s-1) rainfall_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_prsnIs"        field_ref="snow"         /> <!-- P1 (kg m-2 s-1) snowfall_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rldsIs"        field_ref="LWdnSFC"     /> <!-- P1 (W m-2) surface_downwelling_longwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rlusIs"        field_ref="LWdnSFC" > pourc_lic &gt; 0 ? (LWdnSFC - flw_lic) : $missing_value </field>  <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rsdsIs"        field_ref="SWdnSFC"   /> <!-- P1 (W m-2) surface_downwelling_shortwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_rsusIs"        field_ref="SWdnSFC" > pourc_lic &gt; 0 ? (SWdnSFC - fsw_lic) : $missing_value </field>  <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sbl"           field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : The snow and ice sublimation flux is the loss of snow and ice mass from the surface resulting from their conversion to water vapor that enters the atmosphere. -->
+   <field id="CMIP6_sbl_land"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : surface_snow_and_ice_sublimation_flux -->
+   <field id="CMIP6_sbl_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : Surface Snow and Ice Sublimation Flux -->
+   <field id="CMIP6_sblIs"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_sublimation_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sftflf"        field_ref="dummy_XY"       /> <!-- P2 (%) floating_ice_shelf_area_fraction : This is needed to distinguish between grounded glaciated ice (grounded = ice sheet and glacier) and ice shelves (floating over sea water), since land_ice is by definition ice sheet, glacier and ice shelves -->
+   <field id="CMIP6_sftgrf"        field_ref="pourc_lic"         /> <!-- P1 (%) grounded_ice_sheet_area_fraction : This is needed in case the grounded ice sheet area changes in time (NO floating ice shelf) -->
+   <field id="CMIP6_snc"           field_ref="fsnow" > fsnow * 100.  </field> <!-- P1 (%) surface_snow_area_fraction : Fraction of each grid cell that is occupied by snow that rests on land portion of cell. -->
+   <field id="CMIP6_snc_ist"       field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice sheet  only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_sncIs"         field_ref="dummy_XY"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snd"           field_ref="dummy_XY"         /> <!-- P1 (m) surface_snow_thickness : where land over land, this is computed as the mean thickness of snow in the land portion of the grid cell (averaging over the entire land portion, including the snow-free fraction).  Reported as missing where the land fraction is 0. -->
+   <field id="CMIP6_snicefreez"    field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : Surface snow and ice refreeze flux -->
+   <field id="CMIP6_snicefreezIs"  field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snicem"        field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_melt_flux : Surface snow and ice melt flux -->
+   <field id="CMIP6_snicemIs"      field_ref="dummy_XY"         /> <!-- P2 (kg m-2 s-1) surface_snow_and_ice_melt_flux : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snm_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Surface Snow Melt -->
+   <field id="CMIP6_snm_land"      field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Computed as the total surface melt water on the land portion of the grid cell divided by the land area in the grid cell; report as 0.0 for snow-free land regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_snmIs"         field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Loss of snow mass resulting from surface melting. Computed as the surface melt water from snow on the ice sheet portion of the grid cell divided by the ice_sheet area in the grid cell; report as 0.0 for snow-free land_ice regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_sootsn"        field_ref="dummy_XY"         /> <!-- P1 (kg m-2) soot_content_of_surface_snow : the entire land portion of the grid cell is considered, with snow soot content set to 0.0 in regions free of snow. -->
+   <field id="CMIP6_strbasemag"    field_ref="dummy_XY"         /> <!-- P3 (Pa) magnitude_of_basal_drag_at_land_ice_base : Land Ice Basal Drag -->
+   <field id="CMIP6_tasIs"         field_ref="dummy_XY"         /> <!-- P1 (K) air_temperature : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_topg"          field_ref="dummy_XY"         /> <!-- P2 (m) bedrock_altitude : Bedrock Altitude -->
+   <field id="CMIP6_topg_ist"      field_ref="dummy_XY"         /> <!-- P2 (m) bedrock_altitude : This is needed in case bed rock elevation changes in time -->
+   <field id="CMIP6_tpf"           field_ref="dummy_XY"         /> <!-- P1 (m) permafrost_layer_thickness : where land over land: This is the mean thickness of the permafrost layer in the land portion of the grid cell.  Reported as missing in permafrost-free regions. -->
+   <field id="CMIP6_tsIs"          field_ref="tsol_lic" > pourc_lic &gt; 0 ? tsol_lic : $missing_value </field>  <!-- P1 (K) surface_temperature : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : This temperature is averaged over all the snow in the grid cell that rests on land or land ice.  When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.   Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_tsnIs"         field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice_sheet (meaning grounded ice sheet and floating ice shelf) only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_xvelbase"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_basal_x_velocity : X-component of land ice basal velocity -->
+   <field id="CMIP6_xvelmean"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_vertical_mean_x_velocity : X-component of land ice vertical mean velocity -->
+   <field id="CMIP6_xvelsurf"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_surface_x_velocity : X-component of land ice surface velocity -->
+   <field id="CMIP6_yvelbase"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_basal_y_velocity : Y-component of land ice basal velocity -->
+   <field id="CMIP6_yvelmean"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_vertical_mean_y_velocity : Y-component of land ice vertical mean velocity -->
+   <field id="CMIP6_yvelsurf"      field_ref="dummy_XY"         /> <!-- P2 (m s-1) land_ice_surface_y_velocity : Y-component of land ice surface velocity -->
+   <field id="CMIP6_zvelbase"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_basal_upward_velocity : Upward-component of land ice basal velocity -->
+   <field id="CMIP6_zvelsurf"      field_ref="dummy_XY"         /> <!-- P3 (m s-1) land_ice_surface_upward_velocity : Upward component of land ice surface velocity -->
+</field_definition>
+</context>
Index: CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/ping_orchidee.xml
===================================================================
--- CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/ping_orchidee.xml	(revision 3772)
+++ CONFIG/UNIFORM/v6/LMDZOR_v6/GENERAL/PARAM/ping_orchidee.xml	(revision 3772)
@@ -0,0 +1,330 @@
+<!-- ==================================================================================================================== -->
+<!-- CMIP6_ping_land.xml                                                                                                  -->
+<!-- This file is not used while running the model. It is only here for preparing output for CMIP6 simulations.           -->
+<!-- This file contains all output variables in the data request for CMIP6 concerning ORCHIDEE.                           -->
+<!-- field id should not be changed. It is used by the tool dr2xml to produce specific file_def.xml files for CMIP6.      -->
+<!-- field_ref corresponds to field id in field_def_orchidee.xml.                                                         -->
+<!-- field_ref="dummy" means that the corresponding output variable in ORCHIDEE has not yet been identified or coded.     -->
+<!--                                                                                                                      -->
+<!-- $HeadURL: svn://forge.ipsl.jussieu.fr/orchidee/trunk/ORCHIDEE/src_xml/CMIP6_ping_land.xml $                          -->
+<!-- $Date: 2018-03-13 17:38:36 +0100 (Tue, 13 Mar 2018) $                                                              -->
+<!-- $Revision: 5091 $                                                                                                    -->
+<!-- ==================================================================================================================== -->
+
+<!-- Ping files generated by dr2xml 0.27 using Data Request 01.00.21 -->
+<!-- lrealms= ['land'] -->
+<!-- exact= False -->
+<!--  listof_home_vars : None
+ tierMax : 3
+ realms_per_context : {'lmdz': ['atmos', 'atmos land'], 'nemo': ['seaIce', 'ocean', 'ocean seaIce', 'ocnBgchem', 'seaIce ocean'], 'orchidee': ['land', 'landIce land', 'land landIce', 'landIce']}
+ max_priority : 3
+ max_file_size_in_floats : 20000000000.0
+ grid_choice : {'IPSL-CM6A-LR': 'LR'}
+ excluded_vars_file : None
+ sizes : {'LR': [20592, 79, 32768, 91, 30, 14, 128]}
+ ping_variables_prefix : CMIP6_
+ source_types : {'IPSL-CM6A-LR': 'AOGCM AER BGC'}
+ path_extra_tables : None
+ grid_policy : native
+ path_special_defs : None
+ mips : {'LR': set(['CORDEX', 'GMMIP', 'RFMIP', 'VolMIP', 'CMIP6', 'ScenarioMIP', 'GeoMIP', 'C4MIP', 'PDRMIP', 'CMIP', 'DECK', 'LUMIP', 'CMIP5', 'CFMIP', 'OMIP', 'DAMIP', 'CCMI', 'SolarMIP', 'VIACSAB', 'SIMIP', 'DCPP', 'ISMIP6', 'AerChemMIP', 'PMIP', 'FAFMIP', 'DynVar', 'LS3MIP', 'SPECS', 'HighResMIP'])}
+ excluded_vars : []
+ orphan_variables : {}
+--> 
+
+<context id="orchidee">
+<field_definition>
+<!-- for variables which realm equals one of _land-->
+   <field id="CMIP6_agesno"        field_ref="snowage_glob"         /> <!-- P1 (day) age_of_surface_snow : age_of_surface_snow -->
+   <field id="CMIP6_agesno"        field_ref="snowage_glob"         /> <!-- P1 (day) age_of_surface_snow : When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.  Reported as "missing in regions free of snow on land. -->
+   <field id="CMIP6_albc"          field_ref="vegalb_glob"         /> <!-- P1 (1) canopy_albedo : Canopy Albedo -->
+   <field id="CMIP6_albsn"         field_ref="albedo_snow"         /> <!-- P1 (1) snow_and_ice_albedo : Snow Albedo -->
+   <field id="CMIP6_areacella"     field_ref="areas"         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report atmospheric variables and any other variable using that grid (e.g., soil moisture content). These cell areas should be defined to enable exact calculation of global integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_areacellg"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m2) cell_area : Cell areas any grid used to report ice sheet variables. These cell areas should be defined to enable exact calculation of area integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere) -->
+   <field id="CMIP6_areacellr"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m2) cell_area : Cell areas for any grid used to report river model variables (may be the same as for atmospheric variables). These cell areas should be defined to enable exact calculation of area integrals (e.g., of vertical fluxes of energy at the surface and top of the atmosphere). -->
+   <field id="CMIP6_ares"          field_ref="raero"         /> <!-- P1 (s m-1) aerodynamic_resistance : aerodynamic_resistance -->
+   <field id="CMIP6_baresoilFrac"  field_ref="baresoilFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by bare soil. Warning: we do not include the bare soil fraction from the vegetated pft's. Note: Multiplied in sechiba by contfrac because we need entire grid-cell -->
+   <field id="CMIP6_burntFractionAll" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : Percentage of grid cell burned due to all fires including natural and anthropogenic fires and those associated with anthropogenic land use change -->
+   <field id="CMIP6_c13Land"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) total_land_c13 : Mass of 13C in all terrestrial carbon pools -->
+   <field id="CMIP6_c13Litter"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_c13_content : Mass of 13C in Litter Pool -->
+   <field id="CMIP6_c13Soil"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_c13_content : Mass of 13C in Soil Pool -->
+   <field id="CMIP6_c13Veg"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_c13_content : Mass of 13C in Vegetation -->
+   <field id="CMIP6_c14Land"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) total_land_c14 : Mass of 14C in all terrestrial carbon pools -->
+   <field id="CMIP6_c14Litter"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_c14_content : Mass of 14C in Litter Pool -->
+   <field id="CMIP6_c14Soil"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_c14_content : Mass of 14C in Soil Pool -->
+   <field id="CMIP6_c14Veg"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_c14_content : only requested for DECK HIST -->
+   <field id="CMIP6_c3PftFrac"     field_ref="c3PftFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by C3 PFTs (including grass, crops, and trees). -->
+   <field id="CMIP6_c4PftFrac"     field_ref="c4PftFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by C4 PFTs (including grass and crops). -->
+   <field id="CMIP6_cCwd"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) wood_debris_carbon_content : Carbon Mass in Coarse Woody Debris -->
+   <field id="CMIP6_cLand"         field_ref="cLand"         /> <!-- P1 (kg m-2) total_land_carbon : Total Carbon in All Terrestrial Carbon Pools -->
+   <field id="CMIP6_cLeaf"         field_ref="cLeaf"         /> <!-- P1 (kg m-2) leaf_carbon_content : Carbon Mass in Leaves -->
+   <field id="CMIP6_cLitter"       field_ref="cLitter"         /> <!-- P1 (kg m-2) litter_carbon_content : Carbon Mass in Litter Pool -->
+   <field id="CMIP6_cLitterAbove"  field_ref="cLitterAbove"         /> <!-- P1 (kg m-2) surface_litter_carbon_content : Carbon Mass in Above-Ground Litter -->
+   <field id="CMIP6_cLitterBelow"  field_ref="cLitterBelow"         /> <!-- P1 (kg m-2) subsurface_litter_carbon_content : Carbon Mass in Below-Ground Litter -->
+   <field id="CMIP6_cLitterCwd"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_wood_debris_carbon_content : Carbon Mass in Coarse Woody Debris -->
+   <field id="CMIP6_cLitterGrass"  field_ref="cLitterGrass"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on grass tiles -->
+   <field id="CMIP6_cLitterLut"    field_ref="clitterlut" /> <!-- P1 (kg m-2) litter_carbon_content : carbon  in above and belowground litter pools on land use tiles -->
+   <field id="CMIP6_cLitterShrub"  field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on shrub tiles -->
+   <field id="CMIP6_cLitterSubSurf" field_ref="cLitterBelow"         /> <!-- P2 (kg m-2) subsurface_litter_carbon_content : Carbon Mass in Below-Ground Litter Warning: Duplicate of CMIP6_cLitterBelow -->
+   <field id="CMIP6_cLitterSurf"   field_ref="cLitterAbove"         /> <!-- P2 (kg m-2) surface_litter_carbon_content : Carbon Mass in Above-Ground Litter Warning: Duplicate of CMIP6_cLitterAbove -->
+   <field id="CMIP6_cLitterTree"   field_ref="cLitterTree"         /> <!-- P2 (kg m-2) litter_carbon_content : Carbon mass in litter on tree tiles -->
+   <field id="CMIP6_cMisc"         field_ref="cMisc"         /> <!-- P2 (kg m-2) miscellaneous_living_matter_carbon_content : Carbon Mass in Other Living Compartments on Land -->
+   <field id="CMIP6_cOther"        field_ref="cOther"         /> <!-- P2 (kg m-2) other_vegegtation_components_carbon_content : Carbon Mass in Vegetation Components other than Leaves, Stems and Roots -->
+   <field id="CMIP6_cProduct"      field_ref="cProduct"         /> <!-- P1 (kg m-2) carbon_content_of_products_of_anthropogenic_land_use_change : Carbon Mass in Products of Land Use Change -->
+   <field id="CMIP6_cProductLut"   field_ref="cproductlut" /> <!-- P1 (kg m-2) carbon_content_in_wood_and_agricultural_products : wood and agricultural product pool carbon associated with land use tiles; examples of products include paper, cardboard, timber for construction, and crop harvest for food or fuel. -->
+   <field id="CMIP6_cRoot"         field_ref="cRoot"         /> <!-- P1 (kg m-2) root_carbon_content : including fine and coarse roots. -->
+   <field id="CMIP6_cSoil"         field_ref="cSoil"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon Mass in Soil Pool -->
+   <field id="CMIP6_cSoilAbove1m"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon mass in soil pool above 1m depth -->
+   <field id="CMIP6_cSoilBelow1m"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_carbon_content : Carbon Mass in Soil Pool below 1m Depth -->
+   <field id="CMIP6_cSoilFast"     field_ref="cSoilFast"         /> <!-- P1 (kg m-2) fast_soil_pool_carbon_content : fast is meant as lifetime of less than 10 years for  reference climate conditions (20 C, no water limitations). -->
+   <field id="CMIP6_cSoilGrass"    field_ref="cSoilGrass"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on grass tiles -->
+   <field id="CMIP6_cSoilLevels"   field_ref="dummy_XYSo_not_provided"       /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in each model soil level (summed over all soil carbon pools in that level) -->
+   <field id="CMIP6_cSoilLut"      field_ref="csoillut" /> <!-- P1 (kg m-2) soil_carbon_content : carbon  in soil pool on land use tiles -->
+   <field id="CMIP6_cSoilMedium"   field_ref="cSoilMedium"         /> <!-- P1 (kg m-2) medium_soil_pool_carbon_content : medium is meant as lifetime of more than than 10 years and less than 100 years for  reference climate conditions (20 C, no water limitations) -->
+   <field id="CMIP6_cSoilPools"    field_ref="cSoilPools"/> <!-- P2 (kg m-2) soil_carbon_content_by_pool : Carbon mass in each model soil pool (summed over vertical levels) -->
+   <field id="CMIP6_cSoilShrub"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on shrub tiles -->
+   <field id="CMIP6_cSoilSlow"     field_ref="cSoilSlow"         /> <!-- P1 (kg m-2) slow_soil_pool_carbon_content : fast is meant as lifetime of more than 100 years for  reference climate conditions (20 C, no water limitations) -->
+   <field id="CMIP6_cSoilTree"     field_ref="cSoilTree"         /> <!-- P2 (kg m-2) soil_carbon_content : Carbon mass in soil on tree tiles -->
+   <field id="CMIP6_cStem"         field_ref="cStem"         /> <!-- P2 (kg m-2) stem_carbon_content : Carbon Mass in Stem -->
+   <field id="CMIP6_cTotFireLut"   field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (kg m-2 s-1)  : Total carbon loss from natural and managed fire on land use tile, including deforestation fires -->
+   <field id="CMIP6_cVeg"          field_ref="cVeg"         /> <!-- P1 (kg m-2) vegetation_carbon_content : Carbon Mass in Vegetation -->
+   <field id="CMIP6_cVegGrass"     field_ref="cVegGrass"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on grass tiles -->
+   <field id="CMIP6_cVegLut"       field_ref="cveglut" /> <!-- P1 (kg m-2) vegetation_carbon_content : carbon in vegetation on land use tiles -->
+   <field id="CMIP6_cVegShrub"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on shrub tiles -->
+   <field id="CMIP6_cVegTree"      field_ref="cVegTree"         /> <!-- P2 (kg m-2) vegetation_carbon_content : Carbon mass in vegetation on tree tiles -->
+   <field id="CMIP6_cWood"         field_ref="cWood"         /> <!-- P2 (kg m-2) wood_carbon_content : Carbon Mass in Wood -->
+   <field id="CMIP6_clayfrac"      field_ref="clayfraction"       /> <!-- P1 (1) volume_fraction_of_clay_in_soil : Clay Fraction -->
+   <field id="CMIP6_cnc"           field_ref="cnc"         /> <!-- P1 (%) vegetation_area_fraction : Canopy covered fraction Warning: fraction over total land -->
+   <field id="CMIP6_cropFrac"      field_ref="cropFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by crop. Warning: Note: Multiplied in sechiba by contfrac because we need entire grid-cell -->
+   <field id="CMIP6_cropFracC3"    field_ref="cropFracC3"         /> <!-- P1 (%) area_fraction : Percentage Cover by C3 Crops -->
+   <field id="CMIP6_cropFracC4"    field_ref="cropFracC4"         /> <!-- P1 (%) area_fraction : Percentage Cover by C4 Crops -->
+   <field id="CMIP6_cw"            field_ref="qsintveg_tot"         /> <!-- P1 (kg m-2) canopy_water_amount : canopy_water_amount -->
+   <field id="CMIP6_dcw"           field_ref="delintercept"         /> <!-- P1 (kg m-2) change_over_time_in_canopy_water_amount : change_over_time_in_canopy_water_amount -->
+   <field id="CMIP6_dfr"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_frozen_soil : depth_of_frozen_soil -->
+   <field id="CMIP6_dgw"           field_ref="delslowr"         /> <!-- P1 (kg m-2) change_over_time_in_groundwater : change_over_time_in_groundwater Warning: It can be either undef or delslowr. We take the second option for the moment. -->
+   <field id="CMIP6_dmlt"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_subsurface_melting : depth_of_subsurface_melting -->
+   <field id="CMIP6_drivw"         field_ref="delriv"         /> <!-- P1 (kg m-2) change_over_time_in_river_water_amount : change_over_time_in_river_water_amount Warning: we sum the stream and fast reservoir of the routing scheme. -->
+   <field id="CMIP6_dslw"          field_ref="delsoilmoist"         /> <!-- P1 (kg m-2) change_over_time_in_water_content_of_soil_layer : change_over_time_in_water_content_of_soil_layer -->
+   <field id="CMIP6_dsn"           field_ref="delswe"         /> <!-- P1 (kg m-2) change_over_time_in_surface_snow_and_ice_amount : change_over_time_in_surface_snow_and_ice_amount -->
+   <field id="CMIP6_dsw"           field_ref="delsurfwater"         /> <!-- P1 (kg m-2) change_over_time_in_surface_water_amount : change_over_time_in_surface_water_amount Warning: includes the fast reservoire -->
+   <field id="CMIP6_dtes"          field_ref="dtes"         /> <!-- P1 (J m-2) change_over_time_in_thermal_energy_content_of_surface : Change in surface heat storage -->
+   <field id="CMIP6_dtesn"         field_ref="del_snowheattot"         /> <!-- P1 (J m-2) change_over_time_in_thermal_energy_content_of_surface_snow_and_ice : Change in snow/ice cold content Warning: Computed only for the layered scheme on vegetated and bare soil area -->
+   <field id="CMIP6_ec"            field_ref="evspsblveg"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_canopy : liquid_water_evaporation_flux_from_canopy -->
+   <field id="CMIP6_eow"           field_ref="vevapflo"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_open_water : liquid_water_evaporation_flux_from_open_water -->
+   <field id="CMIP6_es"            field_ref="vevapnu"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_soil : liquid_water_evaporation_flux_from_soil -->
+   <field id="CMIP6_esn"           field_ref="vevapsno"         /> <!-- P1 (kg m-2 s-1) liquid_water_evaporation_flux_from_surface_snow : liquid_water_evaporation_flux_from_surface_snow -->
+   <field id="CMIP6_et"            field_ref="vevapp"         /> <!-- P1 (kg m-2 s-1) surface_evapotranspiration : surface_evapotranspiration -->
+   <field id="CMIP6_evspsblpot"    field_ref="evapot"         /> <!-- P1 (kg m-2 s-1) water_potential_evaporation_flux : Potential Evapotranspiration -->
+   <field id="CMIP6_evspsblsoi"    field_ref="evspsblsoi"         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux_from_soil : includes sublimation. -->
+   <field id="CMIP6_evspsblveg"    field_ref="evspsblveg"         /> <!-- P1 (kg m-2 s-1) water_evaporation_flux_from_canopy : the canopy evaporation+sublimation (if present in model). Warning: No sublimation here for Orchidee -->
+   <field id="CMIP6_fAnthDisturb"  field_ref="fAnthDisturb"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_anthrogpogenic_emission : carbon mass flux into atmosphere due to any human activity -->
+   <field id="CMIP6_fBNF"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) biological_nitrogen_fixation : biological nitrogen fixation -->
+   <field id="CMIP6_fCLandToOcean" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_ocean_from_rivers : Lateral transfer of carbon out of gridcell that eventually goes into ocean -->
+   <field id="CMIP6_fDeforestToAtmos" field_ref="fLuc"         /> <!-- P2 (kg m-2 s-1) surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change : Deforested biomass that goes into atmosphere as a result of anthropogenic land use change Warning : duplicate of variable fLuc -->
+   <field id="CMIP6_fDeforestToProduct" field_ref="fDeforestToProduct"         /> <!-- P1 (kg m-2 s-1) deforested_biomass_into_product_pool_due_to_anthorpogenic_land_use_change : Deforested biomass that goes into product pool as a result of anthropogenic land use change -->
+   <field id="CMIP6_fFire"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fires_excluding_anthropogenic_land_use_change : CO2 emissions (expressed as a carbon mass flux) from natural fires + human ignition fires as calculated by the fire module of the DGVM, but excluding any CO2 flux from fire included in fLuc, defined below (CO2 Flux to Atmosphere from Land Use Change). -->
+   <field id="CMIP6_fFireAll"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_all_sources : Carbon Mass Flux into Atmosphere due to CO2 emissions from Fire resulting from all sources including natural, anthropogenic and land use change. -->
+   <field id="CMIP6_fFireNat"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) fire_CO2_emissions_from_wildfire : Carbon Mass Flux into Atmosphere due to CO2 Emission from natural Fire -->
+   <field id="CMIP6_fGrazing"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_grazing : Carbon Mass Flux into Atmosphere due to Grazing on Land -->
+   <field id="CMIP6_fHarvest"      field_ref="fHarvest"         /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting : Carbon Mass Flux into Atmosphere due to Crop Harvesting -->
+   <field id="CMIP6_fHarvestToAtmos" field_ref="fHarvest"         /> <!-- P2 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting : Harvested biomass that goes straight into atmosphere Warning : Duplicate variable fHarvest -->
+   <field id="CMIP6_fHarvestToProduct" field_ref="fHarvestToProduct"         /> <!-- P1 (kg m-2 s-1) harvested_biomass_into_product_pool : Harvested biomass that goes into product pool -->
+   <field id="CMIP6_fLitterFire"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_litter_carbon : Carbon Mass Flux from Litter, CWD or any non-living pool into Atmosphere due to CO2 Emission from all Fire -->
+   <field id="CMIP6_fLitterSoil"   field_ref="fLitterSoil"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_from_litter : Total Carbon Mass Flux from Litter to Soil -->
+   <field id="CMIP6_fLuc"          field_ref="fLuc"         /> <!-- P1 (kg m-2 s-1) surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change : Net Carbon Mass Flux into Atmosphere due to Land Use Change -->
+   <field id="CMIP6_fLulccAtmLut"  field_ref="flulccatmlut" /> <!-- P1 (kg s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_direct_to_atmosphere_due_to_anthropogenic_land_use_land_cover_change : carbon transferred directly to atmosphere due to any land-use or land-cover change activities including deforestation or agricultural fire -->
+   <field id="CMIP6_fLulccProductLut" field_ref="flulccproductlut" /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_wood_and_agricultural_product_pools_due_to_anthropogenic_land_use_or_land_cover_change : carbon harvested due to land-use or land-cover change process that enters anthropogenic product pools on tile -->
+   <field id="CMIP6_fLulccResidueLut" field_ref="flulccresiduelut" /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_and_litter_due_to_anthropogenic_land_use_or_land_cover_change : carbon transferred to soil or litter pools due to land-use or land-cover change processes on tile -->
+   <field id="CMIP6_fN2O"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_net_n2o_flux : Total land N2O flux -->
+   <field id="CMIP6_fNAnthDisturb" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_flux_into_atmos_due_to_direct_human_disturbance : nitrogen mass flux out of land due to any human activity -->
+   <field id="CMIP6_fNLandToOcean" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_ocean_from_rivers : Lateral transfer of nitrogen out of gridcell that eventually goes into ocean -->
+   <field id="CMIP6_fNLitterSoil"  field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_soil_from_litter : Total Nitrogen Mass Flux from Litter to Soil -->
+   <field id="CMIP6_fNOx"          field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_net_nox_flux : Total land NOx flux -->
+   <field id="CMIP6_fNProduct"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_to_product_pool_due_to_anthorpogenic_activity : Deforested or harvested biomass as a result of anthropogenic land use or change -->
+   <field id="CMIP6_fNVegLitter"   field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) litter_nitrogen_flux : Total Nitrogen Mass Flux from Vegetation to Litter -->
+   <field id="CMIP6_fNVegSoil"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) nitrogen_mass_flux_into_soil_from_vegetation_excluding_litter : Total Nitrogen Mass Flux from Vegetation Directly to Soil -->
+   <field id="CMIP6_fNdep"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) deposition_of_nitrogen_onto_land : Dry and Wet Deposition of Reactive Nitrogen onto Land -->
+   <field id="CMIP6_fNfert"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) fertiliser_of_nitrogen_onto_land : total N added for cropland fertilisation (artificial and manure) -->
+   <field id="CMIP6_fNgas"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere : Total Nitrogen lost to the atmosphere (sum of NHx, NOx, N2O, N2) -->
+   <field id="CMIP6_fNgasFire"     field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere_due_to_fire : Total N lost to the atmosphere (including NHx, NOx, N2O, N2) from fire. -->
+   <field id="CMIP6_fNgasNonFire"  field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) land_nitrogen_lost_to_atmosphere_not_due_to_fire : Total N lost to the atmosphere (including NHx, NOx, N2O, N2) from all processes except fire. -->
+   <field id="CMIP6_fNleach"       field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost_to_leaching : Total N loss to leaching or runoff (sum of ammonium, nitrite and nitrate) -->
+   <field id="CMIP6_fNloss"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) land_nitrogen_lost : Total N lost (including NHx, NOx, N2O, N2 and leaching) -->
+   <field id="CMIP6_fNnetmin"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) net_nitrogen_mineralisation : Net nitrogen release from soil and litter as the outcome of nitrogen immobilisation and gross mineralisation -->
+   <field id="CMIP6_fNup"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) plant_nitrogen_uptake : total plant nitrogen uptake (sum of ammonium and nitrate), irrespective of the source of nitrogen -->
+   <field id="CMIP6_fProductDecomp" field_ref="fProductDecomp"         /> <!-- P1 (kg m-2 s-1) Carbon_flux_out_of_storage_product_pools_into_atmos : decomposition out of product pools to CO2 in atmos Warning Duplicated variable with fDeforestToProduct -->
+   <field id="CMIP6_fProductDecompLut" field_ref="flulccatmlut" /> <!-- P1 (kg s-1) tendency_of_atmospheric_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_wood_and_agricultural_product_pool : flux from wood and agricultural product pools on land use tile into atmosphere -->
+   <field id="CMIP6_fVegFire"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) fire_CO2_emissions_from_vegetation_carbon : Carbon Mass Flux from Vegetation into Atmosphere due to CO2 Emission from all Fire -->
+   <field id="CMIP6_fVegLitter"    field_ref="fVegLitter"         /> <!-- P1 (kg m-2 s-1) litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter -->
+   <field id="CMIP6_fVegLitterMortality" field_ref="dummy_XY_not_provided"   /> <!-- P2 (kg m-2 s-1) mortality_litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter as a Result of Mortality -->
+   <field id="CMIP6_fVegLitterSenescence" field_ref="dummy_XY_not_provided"  /> <!-- P2 (kg m-2 s-1) senescence_litter_carbon_flux : Total Carbon Mass Flux from Vegetation to Litter as a Result of Leaf, Branch, and Root Senescence -->
+   <field id="CMIP6_fVegSoil"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) carbon_mass_flux_into_soil_from_vegetation_excluding_litter : In some models part of carbon (e.g., root exudate) can go directly into the soil pool without entering litter. -->
+   <field id="CMIP6_fVegSoilMortality" field_ref="dummy_XY_not_provided"     /> <!-- P2 (kg m-2 s-1) mortality_vegtosoil_carbon_flux : Total Carbon Mass Flux from Vegetation to Soil as a result of mortality -->
+   <field id="CMIP6_fVegSoilSenescence" field_ref="dummy_XY_not_provided"    /> <!-- P2 (kg m-2 s-1) senescence_vegtosoil_carbon_flux : Total Carbon Mass Flux from Vegetation to Soil as a result of leaf, branch, and root senescence -->
+   <field id="CMIP6_fahLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_heat_flux_due_to_anthropogenic_energy_consumption : Anthropogenic heat flux generated from non-renewable human primary energy consumption, including energy use by vehicles, commercial and residential buildings, industry, and power plants.  Primary energy refers to energy in natural resources, fossil and nonfossil, before conversion into other forms, such as electricity. -->
+   <field id="CMIP6_fldcapacity"   field_ref="fldcapacity"       /> <!-- P1 (%)  : Field Capacity Warning: Defined as wilt/saturation, may still evolve (AD) -->
+   <field id="CMIP6_fracInLut"     field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (%) area_fraction : annual gross fraction that was transferred into this tile from other land use tiles -->
+   <field id="CMIP6_fracLut"       field_ref="fraclut" /> <!-- P1 (%) area_fraction : fraction of grid cell for each land use tile -->
+   <field id="CMIP6_fracOutLut"    field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (%) area_fraction : annual gross fraction of land use tile  that was transferred into other land use tiles -->
+   <field id="CMIP6_gpp"           field_ref="gpp_ipcc2"         /> <!-- P1 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : only requested for DECK HIST, 1980-present -->
+   <field id="CMIP6_gppGrass"      field_ref="gppgrass"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on grass tiles -->
+   <field id="CMIP6_gppLut"        field_ref="gpplut" /> <!-- P1 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary productivity on land use tile -->
+   <field id="CMIP6_gppShrub"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on Shrub tiles -->
+   <field id="CMIP6_gppTree"       field_ref="gpptree"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_biomass_expressed_as_carbon : gross primary production on tree tiles -->
+   <field id="CMIP6_gppc13"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_c13 : Mass Flux of 13C out of Atmosphere due to Gross Primary Production on Land -->
+   <field id="CMIP6_gppc14"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) gross_primary_productivity_of_c14 : Mass Flux of 14C out of Atmosphere due to Gross Primary Production on Land -->
+   <field id="CMIP6_grassFrac"     field_ref="grassFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell that is covered by natural grass. -->
+   <field id="CMIP6_grassFracC3"   field_ref="grassFracC3"         /> <!-- P1 (%) area_fraction : C3 grass Area Percentage -->
+   <field id="CMIP6_grassFracC4"   field_ref="grassFracC4"         /> <!-- P1 (%) area_fraction : C4 grass Area Percentage -->
+   <field id="CMIP6_hfdsn"         field_ref="snowflxtot"         /> <!-- P1 (W m-2) surface_downward_heat_flux_in_snow : the net downward heat flux from the atmosphere into the snow that lies on land divided by the land area in the grid cell; reported as missing for snow-free land regions or where the land fraction is 0. -->
+   <field id="CMIP6_hflsLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_latent_heat_flux : latent heat flux on land use tile -->
+   <field id="CMIP6_hfssLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upward_sensible_heat_flux : sensible heat flux on land use tile -->
+   <field id="CMIP6_hussLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (1) specific_humidity : near-surface specific humidity on land use tile -->
+   <field id="CMIP6_irrLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (kg s-1) surface_downward_water_flux_due_to_irrigation : Irrigation flux including any irrigation for crops, trees, pasture, or urban lawns -->
+   <field id="CMIP6_ksat"          field_ref="ksat"       /> <!-- P1 (1e-6 m s-1)  : Saturated Hydraulic Conductivity -->
+   <field id="CMIP6_lai"           field_ref="lai_ipcc"         /> <!-- P1 (1) leaf_area_index : a ratio obtained by dividing the total upper leaf surface area of vegetation by the (horizontal) surface area of the land on which it grows. Warning: here we take the average over the entire land fraction; not sure it's ok with the DataRequest comment "a ratio obtained by dividing the total upper leaf surface area of vegetation by the (horizontal) surface area of the land on which it grows." PC+JG : lai_ipcc and laimean are related to the same land fraction(note veget_max in stomate_lpj is not the same veget_max in sechiba!). We see other differencies between these output variables coming mainly from pft3 and some from 6,8,9,12. -->
+   <field id="CMIP6_laiLut"        field_ref="lailut" /> <!-- P1 (1)  : Leaf Area Index on Land Use Tile -->
+   <field id="CMIP6_landCoverFrac" field_ref="landCoverFrac" /> <!-- P1 (%) area_fraction : The categories may differ from model to model, depending on their  PFT definitions.   This may include natural PFTs, anthropogenic PFTs, bare soil, lakes, urban areas, etc.   Sum of all should equal the fraction of the grid-cell that is land. Warning: Note: here not multiplying by contfrac according to DR -->
+   <field id="CMIP6_lwsnl"         field_ref="snowliqtot"         /> <!-- P1 (kg m-2) liquid_water_content_of_snow_layer : where land over land: this is computed as the total mass of liquid water contained interstitially within the snow layer of the land portion of a grid cell divided by the area of the land portion of the cell. Warning: Computed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_mrfso"         field_ref="humtot_frozen"         /> <!-- P1 (kg m-2) soil_frozen_water_content : the mass (summed over all all layers) of frozen water. Warning: To be calculated. -->
+   <field id="CMIP6_mrfsofr"       field_ref="profil_froz_hydro"       /> <!-- P1 (1) mass_fraction_of_frozen_water_in_soil_moisture : mass_fraction_of_frozen_water_in_soil_layer -->
+   <field id="CMIP6_mrlqso"        field_ref="profil_liquid_hydro"       /> <!-- P1 (1) mass_fraction_of_unfrozen_water_in_soil_moisture : mass_fraction_of_unfrozen_water_in_soil_layer -->
+   <field id="CMIP6_mrlso"         field_ref="humtot_liquid"         /> <!-- P1 (kg m-2) soil_liquid_water_content : Soil Liquid Water Content -->
+   <field id="CMIP6_mrro"          field_ref="mrro"         /> <!-- P1 (kg m-2 s-1) runoff_flux : the total runoff (including "drainage" through the base of the soil model) leaving the land portion of the grid cell divided by the land area in the grid cell, averaged over the 3-hour interval. -->
+   <field id="CMIP6_mrroLut"       field_ref="mrro_lut" /> <!-- P1 (kg m-2 s-1) runoff_flux : Total runoff from land use tile -->
+   <field id="CMIP6_mrrob"         field_ref="drainage"         /> <!-- P1 (kg m-2 s-1) subsurface_runoff_flux : subsurface_runoff_flux -->
+   <field id="CMIP6_mrros"         field_ref="runoff"         /> <!-- P1 (kg m-2 s-1) surface_runoff_flux : surface_runoff_flux -->
+   <field id="CMIP6_mrsfl"         field_ref="soilmoist_frozen"       /> <!-- P1 (kg m-2) frozen_moisture_content_of_soil_layer : Frozen water content of soil layer -->
+   <field id="CMIP6_mrsll"         field_ref="soilmoist_liquid"       /> <!-- P1 (kg m-2) liquid_moisture_content_of_soil_layer : Liquid water content of soil layer -->
+   <field id="CMIP6_mrso"          field_ref="humtot"         /> <!-- P1 (kg m-2) soil_moisture_content : the mass per unit area  (summed over all soil layers) of water in all phases. -->
+   <field id="CMIP6_mrsoLut"       field_ref="humtot_lut" /> <!-- P1 (kg m-2) soil_moisture_content : Total soil moisture -->
+   <field id="CMIP6_mrsofc"        field_ref="tmcfc"         /> <!-- P1 (kg m-2) soil_moisture_content_at_field_capacity : reported "where land": divide the total water holding capacity of all the soil in the grid cell by the land area in the grid cell;  reported as "missing" where the land fraction is 0. -->
+   <field id="CMIP6_mrsol"         field_ref="soilmoist"       /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : Total water content of soil layer -->
+   <field id="CMIP6_mrsos"         field_ref="humtot_top"         /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : the mass of water in all phases in a thin surface soil layer. -->
+   <field id="CMIP6_mrsosLut"      field_ref="humtot_top_lut" /> <!-- P1 (kg m-2) moisture_content_of_soil_layer : Moisture in Upper Portion of Soil Column of land use tile -->
+   <field id="CMIP6_mrsow"         field_ref="mrsow"         /> <!-- P1 (1) volume_fraction_of_condensed_water_in_soil_at_field_capacity : relative_soil_moisture_content_above_field_capacity Warning: weird mention to field capacity in the description, overlooked. -->
+   <field id="CMIP6_mrtws"         field_ref="tws"         /> <!-- P1 (kg m-2) total_water_storage : canopy_and_surface_and_subsurface_water_amount -->
+   <field id="CMIP6_nLand"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) total_land_nitrogen : Total nitrogen in all terrestrial nitrogen pools -->
+   <field id="CMIP6_nLeaf"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) leaf_nitrogen_content : Nitrogen Mass in Leaves -->
+   <field id="CMIP6_nLitter"       field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) litter_nitrogen_content : Nitrogen Mass in Litter Pool -->
+   <field id="CMIP6_nLitterCwd"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) litter_wood_debris_nitrogen_content : Nitrogen Mass in Coarse Woody Debris -->
+   <field id="CMIP6_nLitterSubSurf" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) subsurface_litter_nitrogen_content : Nitrogen Mass in below ground litter (non CWD) -->
+   <field id="CMIP6_nLitterSurf"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) surface_litter_nitrogen_content : Nitrogen Mass in above ground litter (non CWD) -->
+   <field id="CMIP6_nMineral"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) mineral_soil_nitrogen_content : Mineral nitrogen in the soil -->
+   <field id="CMIP6_nMineralNH4"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) mineral_nh4_soil_nitrogen_content : Mineral ammonium in the soil -->
+   <field id="CMIP6_nMineralNO3"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) mineral_no3_soil_nitrogen_content : Mineral nitrate in the soil -->
+   <field id="CMIP6_nOther"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) other_vegegtation_components_nitrogen_content : Nitrogen mass in vegetation components other than leaves, stem and root -->
+   <field id="CMIP6_nProduct"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) nitrogen_content_of_products_of_anthropogenic_land_use_change : Nitrogen Mass in Products of Land Use Change -->
+   <field id="CMIP6_nRoot"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) root_nitrogen_content : Nitrogen Mass in Roots -->
+   <field id="CMIP6_nSoil"         field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soil_nitrogen_content : Nitrogen Mass in Soil Pool -->
+   <field id="CMIP6_nStem"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2) stem_nitrogen_content : Nitrogen Mass in Stem -->
+   <field id="CMIP6_nVeg"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) vegetation_nitrogen_content : Nitrogen Mass in Vegetation -->
+   <field id="CMIP6_nbp"           field_ref="nbp"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : This is the net mass flux of carbon between land and atmosphere calculated as photosynthesis MINUS the sum of  plant and soil respiration, carbonfluxes  from fire, harvest, grazing  and land use change. Positive flux  is into the land. -->
+   <field id="CMIP6_necbLut"       field_ref="necbLut" /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : net rate of C accumulation (or loss) on land use tile -->
+   <field id="CMIP6_nep"           field_ref="nep"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change : Net Ecosystem Exchange -->
+   <field id="CMIP6_netAtmosLandC13Flux" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_atmos_to_land_C13_flux : Net Mass Flux of 13C between atmosphere and land (positive into land) as a result of all processes. -->
+   <field id="CMIP6_netAtmosLandC14Flux" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_atmos_to_land_C14_flux : Net Mass Flux of 14C between atmosphere and land (positive into land) as a result of all processes. -->
+   <field id="CMIP6_netAtmosLandCO2Flux" field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2 s-1) surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes : Net flux of CO2 between atmosphere and land (positive into land) as a result of all processes. Warning: Could be done in Orchidee but not considered as a priority  -->
+   <field id="CMIP6_npp"           field_ref="npp_ipcc"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : Carbon Mass Flux out of Atmosphere due to Net Primary Production on Land -->
+   <field id="CMIP6_nppGrass"      field_ref="nppGrass"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on grass tiles -->
+   <field id="CMIP6_nppLeaf"       field_ref="nppLeaf"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_leaves : This is the rate of carbon uptake by leaves due to NPP -->
+   <field id="CMIP6_nppLut"        field_ref="npplut" /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary productivity on land use tile -->
+   <field id="CMIP6_nppOther"      field_ref="nppOther"         /> <!-- P2 (kg m-2 s-1) net_primary_production_allocated_to_other : net primary production allcoated to other pools (not leaves stem or roots) -->
+   <field id="CMIP6_nppRoot"       field_ref="nppRoot"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_roots : This is the rate of carbon uptake by roots due to NPP -->
+   <field id="CMIP6_nppShrub"      field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on Shrub tiles -->
+   <field id="CMIP6_nppStem"       field_ref="nppStem"         /> <!-- P2 (kg m-2 s-1) net_primary_production_allocated_to_stem : net primary production allcoated to stem -->
+   <field id="CMIP6_nppTree"       field_ref="nppTree"         /> <!-- P2 (kg m-2 s-1) net_primary_productivity_of_biomass_expressed_as_carbon : net primary production on tree tiles -->
+   <field id="CMIP6_nppWood"       field_ref="nppWood"         /> <!-- P1 (kg m-2 s-1) net_primary_productivity_of_carbon_accumulated_in_wood : This is the rate of carbon uptake by wood due to NPP -->
+   <field id="CMIP6_nudgincsm"     field_ref="nudgincsm"         /> <!-- P1 (kg m-2) nudging_increment_in_water_content_of_soil_layer : nudging_increment_in_water_content_of_soil_layer -->
+   <field id="CMIP6_nudgincswe"    field_ref="nudgincswe"         /> <!-- P1 (kg m-2) nudging_increment_in_surface_snow_and_ice_amount : nudging_increment_in_surface_snow_and_ice_amount -->
+   <field id="CMIP6_nwdFracLut"    field_ref="nwdFraclut" /> <!-- P1 (%)  : fraction of land use tile tile that is non-woody vegetation ( e.g. herbaceous crops) -->
+   <field id="CMIP6_orog_ist"      field_ref="dummy_XY"         /> <!-- P1 (m) surface_altitude : Surface Altitude -->
+   <field id="CMIP6_orog_ist"      field_ref="dummy_XY"         /> <!-- P1 (m) surface_altitude : This is needed in case the ice sheet elevation changes in time -->
+   <field id="CMIP6_pastureFrac"   field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by anthropogenic pasture. -->
+   <field id="CMIP6_pastureFracC3" field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) area_fraction : C3 Pasture Area Percentage -->
+   <field id="CMIP6_pastureFracC4" field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) area_fraction : C4 Pasture Area Percentage -->
+   <field id="CMIP6_pflw"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) liquid_water_content_of_permafrost_layer : "where land over land", i.e., this is the total mass of liquid water contained within the permafrost layer within the land portion of a grid cell divided by the area of the land portion of the cell. -->
+   <field id="CMIP6_prveg"         field_ref="prveg"         /> <!-- P1 (kg m-2 s-1) precipitation_flux_onto_canopy : the precipitation flux that is intercepted by the vegetation canopy (if present in model) before reaching the ground. -->
+   <field id="CMIP6_qgwr"          field_ref="drainage"         /> <!-- P1 (kg m-2 s-1) water_flux_from_soil_layer_to_groundwater : water_flux_from_soil_layer_to_groundwater Warning: It can be either undef or drainage. We take the second option for the moment. -->
+   <field id="CMIP6_rGrowth"       field_ref="rGrowth_ipcc"         /> <!-- P1 (kg m-2 s-1) surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_growth : Carbon Mass Flux into Atmosphere due to Growth Autotrophic Respiration on Land Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_rMaint"        field_ref="rMaint_ipcc"         /> <!-- P1 (kg m-2 s-1) surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_maintenance : Carbon Mass Flux into Atmosphere due to Maintenance Autotrophic Respiration on Land Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_ra"            field_ref="ra"         /> <!-- P1 (kg m-2 s-1) plant_respiration_carbon_flux : only requested for DECK HIST, 1980-present Warning: Variable coming from stomate, can only be provided for daily or monthly output with Orchidee. -->
+   <field id="CMIP6_raGrass"       field_ref="raGrass"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on grass tiles -->
+   <field id="CMIP6_raLeaf"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_leaves : Total respiration from leaves -->
+   <field id="CMIP6_raLut"         field_ref="ralut" /> <!-- P1 (kg m-2 s-1) plant_respiration_carbon_flux : plant respiration on land use tile -->
+   <field id="CMIP6_raOther"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration : Total respiration from other pools (not leaves stem or roots) -->
+   <field id="CMIP6_raRoot"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_roots : Total Respiration from Roots -->
+   <field id="CMIP6_raShrub"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on Shrub tiles -->
+   <field id="CMIP6_raStem"        field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) autotrophic_respiration_from_stem : Total Respiration from Stem -->
+   <field id="CMIP6_raTree"        field_ref="raTree"         /> <!-- P2 (kg m-2 s-1) plant_respiration_carbon_flux : autotrophic respiration on tree tiles -->
+   <field id="CMIP6_rac13"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_c13_flux : Mass Flux of 13C into Atmosphere due to Autotrophic (Plant) Respiration on Land -->
+   <field id="CMIP6_rac14"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) plant_respiration_c14_flux : Mass Flux of 14C into Atmosphere due to Autotrophic (Plant) Respiration on Land -->
+   <field id="CMIP6_residualFrac"  field_ref="residualFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is land and is covered by "non-vegetation" and "non-bare-soil" (e.g., urban, ice, lakes, etc.) -->
+   <field id="CMIP6_rh"            field_ref="rh_ipcc2"         /> <!-- P1 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration on Land Warning:  Issue with duplicated variables resp_hetero from sechiba and stomate but they are calculated differently. We here need the sechiba variable for 3h freq output. -->
+   <field id="CMIP6_rhGrass"       field_ref="rhGrass"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on grass tiles -->
+   <field id="CMIP6_rhLitter"      field_ref="rhLitter"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux_from_litter : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration from Litter on Land -->
+   <field id="CMIP6_rhLut"         field_ref="rhlut" /> <!-- P1 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : soil heterotrophic respiration on land use tile -->
+   <field id="CMIP6_rhShrub"       field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on Shrub tiles -->
+   <field id="CMIP6_rhSoil"        field_ref="rhSoil"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux_from_soil : Carbon Mass Flux into Atmosphere due to Heterotrophic Respiration from Soil on Land -->
+   <field id="CMIP6_rhTree"        field_ref="rhTree"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_carbon_flux : heterotrophic respiration on tree tiles -->
+   <field id="CMIP6_rhc13"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_c13_flux : Mass Flux of 13C into Atmosphere due to Heterotrophic Respiration on Land -->
+   <field id="CMIP6_rhc14"         field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) heterotrophic_respiration_c14_flux : Mass Flux of 14C into Atmosphere due to Heterotrophic Respiration on Land -->
+   <field id="CMIP6_rivi"          field_ref="dummy_XY_not_provided"         /> <!-- P1 (m3 s-1) water_flux_from_upstream : water_flux_to_downstream -->
+   <field id="CMIP6_rivo"          field_ref="hydrographs"         /> <!-- P1 (m3 s-1) water_flux_to_downstream : water_flux_from_upstream -->
+   <field id="CMIP6_rlusLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upwelling_longwave_flux_in_air : Surface Upwelling Longwave on Land Use Tile -->
+   <field id="CMIP6_rootd"         field_ref="zmaxh"         /> <!-- P1 (m) root_depth : report the maximum soil depth reachable by plant roots (if defined in model), i.e., the maximum soil depth from which they can extract moisture; report as "missing" where the land fraction is 0. -->
+   <field id="CMIP6_rootdsl"       field_ref="nroot"       /> <!-- P1 (kg m-3)  : Root Distribution Warning: It's a relative root density per layer in Orchidee with no dimension. -->
+   <field id="CMIP6_rsusLut"       field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (W m-2) surface_upwelling_shortwave_flux_in_air : Surface Upwelling Shortwave  on Land Use Tile -->
+   <field id="CMIP6_rzwc"          field_ref="humtot"         /> <!-- P1 (kg m-2) water_content_of_root_zone : water_content_of_root_zone -->
+   <field id="CMIP6_sandfrac"      field_ref="sandfraction"       /> <!-- P1 (1)  : Sand Fraction -->
+   <field id="CMIP6_sftgif"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) land_ice_area_fraction : Fraction of Grid Cell Covered with Glacier -->
+   <field id="CMIP6_shrubFrac"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by shrub. -->
+   <field id="CMIP6_slthick"       field_ref="dlh"       /> <!-- P1 (m)  : Thickness of Soil Layers -->
+   <field id="CMIP6_snc"           field_ref="frac_snow"         /> <!-- P1 (%) surface_snow_area_fraction : Fraction of each grid cell that is occupied by snow that rests on land portion of cell. -->
+   <field id="CMIP6_snc_ist"       field_ref="dummy_ist"         /> <!-- P1 (%) surface_snow_area_fraction : quantity averaged over ice sheet  only, to avoid contamination from other surfaces (eg: permafrost) -->
+   <field id="CMIP6_snd"           field_ref="snowdepth"         /> <!-- P1 (m) surface_snow_thickness : where land over land, this is computed as the mean thickness of snow in the land portion of the grid cell (averaging over the entire land portion, including the snow-free fraction).  Reported as missing where the land fraction is 0. Warning: Computed and weigthed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_snm_land"      field_ref="snowmelt"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Computed as the total surface melt water on the land portion of the grid cell divided by the land area in the grid cell; report as 0.0 for snow-free land regions; report as missing where the land fraction is 0. -->
+   <field id="CMIP6_snm_land"      field_ref="snowmelt"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : surface_snow_and_ice_melt_flux -->
+   <field id="CMIP6_snm_ist"       field_ref="dummy_XY"         /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux : Surface Snow Melt -->
+   <field id="CMIP6_snw_land"      field_ref="snow"         /> <!-- P1 (kg m-2) surface_snow_amount : Computed as the mass of surface snow on the land portion of the grid cell divided by the land area in the grid cell; reported as missing where the land fraction is 0; excluded is snow on vegetation canopy or on sea ice. -->
+   <field id="CMIP6_snw_land"      field_ref="snow"         /> <!-- P1 (kg m-2) surface_snow_amount : the mass of surface snow on the land portion of the grid cell divided by the land area in the grid cell; reported as missing where the land fraction is 0; excludes snow on vegetation canopy or on sea ice. -->
+   <field id="CMIP6_sootsn"        field_ref="dummy_XY_not_provided"         /> <!-- P1 (kg m-2) soot_content_of_surface_snow : the entire land portion of the grid cell is considered, with snow soot content set to 0.0 in regions free of snow. -->
+   <field id="CMIP6_sw"            field_ref="surfwater"         /> <!-- P1 (kg m-2) surface_water_amount_assuming_no_snow : surface_water_amount_assuming_no_snow Warning: includes the fast reservoire -->
+   <field id="CMIP6_sweLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (m)  : snow water equivalent on land use tile -->
+   <field id="CMIP6_tSoilPools"    field_ref="tSoilPools"/> <!-- P2 (s-1) soil_carbon_turnover_rate_by_pool : turnover rate of each model soil carbon pool -->
+   <field id="CMIP6_tasLut"        field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (K) air_temperature : near-surface air temperature (2m above displacement height, i.e. t_ref) on land use tile -->
+   <field id="CMIP6_tcs"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) canopy_temperature : Vegetation Canopy Temperature -->
+   <field id="CMIP6_tgs"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) surface_temperature : Temperature of bare soil -->
+   <field id="CMIP6_tpf"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) permafrost_layer_thickness : where land over land: This is the mean thickness of the permafrost layer in the land portion of the grid cell.  Reported as missing in permafrost-free regions. Warning: not yet computed but maybe doable following MICT -->
+   <field id="CMIP6_tran"          field_ref="tran"         /> <!-- P1 (kg m-2 s-1) transpiration_flux : Transpiration -->
+   <field id="CMIP6_treeFrac"      field_ref="treeFrac"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by trees. -->
+   <field id="CMIP6_treeFracBdlDcd" field_ref="treeFracBdlDcd"         /> <!-- P1 (%) area_fraction : Broadleaf deciduous tree fraction -->
+   <field id="CMIP6_treeFracBdlEvg" field_ref="treeFracBdlEvg"         /> <!-- P1 (%) area_fraction : Broadleaf evergreen tree fraction -->
+   <field id="CMIP6_treeFracNdlDcd" field_ref="treeFracNdlDcd"         /> <!-- P1 (%) area_fraction : Needleleaf deciduous tree fraction -->
+   <field id="CMIP6_treeFracNdlEvg" field_ref="treeFracNdlEvg"         /> <!-- P1 (%) area_fraction : Needleleaf evergreen tree fraction -->
+   <field id="CMIP6_treeFracPrimDec" field_ref="treeFracPrimDec"         /> <!-- P1 (%) area_fraction : This is the fraction of the entire grid cell  that is covered by "total primary deciduous trees." -->
+   <field id="CMIP6_treeFracPrimEver" field_ref="treeFracPrimEver"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by primary evergreen trees. -->
+   <field id="CMIP6_treeFracSecDec" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by secondary deciduous trees. -->
+   <field id="CMIP6_treeFracSecEver" field_ref="dummy_XY_not_provided"         /> <!-- P1 (%) area_fraction : fraction of entire grid cell  that is covered by secondary evergreen trees. -->
+   <field id="CMIP6_tsl"           field_ref="ptn"       /> <!-- P1 (K) soil_temperature : Temperature of single near-surface soil layer.  Reported as "missing" for grid cells occupied entirely by "sea". -->
+   <field id="CMIP6_tslsi"         field_ref="temp_sol_new"         /> <!-- P1 (K) surface_temperature : Surface temperature of all surfaces except open ocean. -->
+   <field id="CMIP6_tslsiLut"      field_ref="dummy_XY_landUse_not_provided" /> <!-- P1 (K) surface_temperature : Surface Temperature on Landuse Tile -->
+   <field id="CMIP6_tsn_ist"       field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsn_ist"       field_ref="dummy_XY"         /> <!-- P1 (K) temperature_in_surface_snow : quantity averaged over ice sheet (grounded ice sheet and floating ice shelf) only. Needed to analyse the impact of downscaling methods -->
+   <field id="CMIP6_tsn_land"      field_ref="dummy_XY_not_provided"         /> <!-- P1 (K) temperature_in_surface_snow : This temperature is averaged over all the snow in the grid cell that rests on land or land ice.  When computing the time-mean here, the time samples, weighted by the mass of snow on the land portion of the grid cell, are accumulated and then divided by the sum of the weights.   Reported as "missing in regions free of snow on land. Warning: Doable but painful with the two different snow schemes. -->
+   <field id="CMIP6_tsnl"          field_ref="snowtemp"       /> <!-- P1 (K) snow_temperature : Density-weighted average temperature of the snow in layers  (for models with 3D snow schemes) Warning: Computed only for the layered scheme on vegetated and bare soil area. -->
+   <field id="CMIP6_vegFrac"       field_ref="vegFrac"         /> <!-- P1 (%) area_fraction : Total vegetated fraction -->
+   <field id="CMIP6_vegHeight"     field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) canopy_height : canopy height -->
+   <field id="CMIP6_vegHeightCrop" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the crop fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightGrass" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the grass fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightPasture" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the pasture fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightShrub" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the shrub fraction of a grid cell. -->
+   <field id="CMIP6_vegHeightTree" field_ref="dummy_XY_not_provided"         /> <!-- P2 (m) canopy_height : Vegetation height averaged over the tree fraction of a grid cell. -->
+   <field id="CMIP6_wetlandCH4"    field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_emissions : Grid averaged methane emissions from wetlands -->
+   <field id="CMIP6_wetlandCH4cons" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_consumption : Grid averaged methane consuption (methanotrophy) from wetlands -->
+   <field id="CMIP6_wetlandCH4prod" field_ref="dummy_XY_not_provided"         /> <!-- P2 (kg m-2 s-1) wetland_methane_production : Grid averaged methane production (methanogenesis) from wetlands -->
+   <field id="CMIP6_wetlandFrac"   field_ref="dummy_XY_not_provided"         /> <!-- P2 (%) wetland_fraction : Fraction of a grid cell covered by wetland. -->
+   <field id="CMIP6_wilt"          field_ref="wilt"       /> <!-- P1 (%)  : Wilting Point Warning: Defined as wilt/saturation, may still evolve (AD) -->
+   <field id="CMIP6_wtd"           field_ref="dummy_XY_not_provided"         /> <!-- P1 (m) depth_of_soil_moisture_saturation : depth_of_soil_moisture_saturation -->
+</field_definition>
+</context>
