Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/.chimie
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/.chimie	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/.chimie	(revision 2330)
@@ -0,0 +1,1 @@
+CHEM=NMHC_AER
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/.resol
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/.resol	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/.resol	(revision 2330)
@@ -0,0 +1,2 @@
+NMHC_AERxLMD9695-L39
+RESOL_ATM_3D=96x95x39
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/AA_make
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/AA_make	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/AA_make	(revision 2330)
@@ -0,0 +1,61 @@
+#- $Id$
+
+all : 
+	if [ -s ./.resol ] ; then gmake `cat .resol` ; else gmake NMHC_AERxLMD9695-L39 ; fi
+
+
+#AERxLMD9695-L39 : libioipsl liborchideefcm aer_lmdz969539
+#	echo "AERxLMD9695-L39" >.resol
+#	echo "RESOL_ATM_3D=96x95x39" >>.resol
+#	echo "CHEM=AER" > .chimie
+
+NMHC_AERxLMD9695-L39 : libioipsl liborchideefcm nmhcaer_lmdz969539
+	echo "NMHC_AERxLMD9695-L39" >.resol
+	echo "RESOL_ATM_3D=96x95x39" >>.resol
+	echo "CHEM=NMHC_AER" > .chimie
+
+#GESxLMD9695-L39 : libioipsl liborchideefcm ges_lmdz969539
+#	echo "GESxLMD9695-L39" >.resol
+#	echo "RESOL_ATM_3D=96x95x39" >>.resol
+#	echo "CHEM=GES" > .chimie
+
+#AERxLMD144142-L39 : libioipsl liborchideefcm aer_lmdz14414239
+#	echo "AERxLMD144142-L39" >.resol
+#	echo "RESOL_ATM_3D=144x142x39" >>.resol
+#	echo "CHEM=AER" > .chimie
+
+
+libioipsl :
+	(cd ../../modeles/IOIPSL/src ; $(M_K) -f Makefile)
+
+
+liborchideefcm : ../../modeles/ORCHIDEE/
+	(cd ../../modeles/ORCHIDEE/ ; ./makeorchidee_fcm -parallel mpi_omp -arch $(FCM_ARCH) -driver -j 8 )
+
+
+#aer_lmdz969539:
+#	(cd ../../modeles/INCA; ./makeinca_fcm -chimie AER -parallel mpi_omp  -resol 96x95x39 -arch $(FCM_ARCH); cp SIMULATIONS/AER/inca.dat ../../bin/inca.dat ; )	
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm -chimie INCA -d 96x95x39 -parallel mpi_omp -arch $(FCM_ARCH) ce0l ; cp bin/ce0l_96x95x39_phylmd_para_inca.e ../../bin/create_etat0_limit.e ; )
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm  -d 96x95x39 -chimie INCA -v true -parallel mpi_omp  -arch $(FCM_ARCH) gcm ; cp bin/gcm_96x95x39_phylmd_para_orch_inca.e ../../bin/gcm.e ; )
+
+nmhcaer_lmdz969539:
+	(cd ../../modeles/INCA; ./makeinca_fcm -chimie NMHC_AER -parallel mpi_omp  -resol 96x95x39 -arch $(FCM_ARCH); cp SIMULATIONS/NMHC_AER/inca.dat ../../bin/inca.dat ; )	
+	(cd ../../modeles/LMDZ; ./makelmdz_fcm -chimie INCA -d 96x95x39 -parallel mpi_omp -arch $(FCM_ARCH) ce0l ; cp bin/ce0l_96x95x39_phylmd_para_inca.e ../../bin/create_etat0_limit.e ; )
+	(cd ../../modeles/LMDZ; ./makelmdz_fcm  -d 96x95x39 -chimie INCA -v true -parallel mpi_omp  -arch $(FCM_ARCH) gcm ; cp bin/gcm_96x95x39_phylmd_para_orch_inca.e ../../bin/gcm.e ; )
+
+#ges_lmdz969539:
+#	(cd ../../modeles/INCA; ./makeinca_fcm -chimie GES -parallel mpi_omp  -resol 96x95x39 -arch $(FCM_ARCH); cp SIMULATIONS/GES/inca.dat ../../bin/inca.dat ; )	
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm -chimie INCA -d 96x95x39 -parallel mpi_omp -arch $(FCM_ARCH) ce0l ; cp bin/ce0l_96x95x39_phylmd_para_inca.e ../../bin/create_etat0_limit.e ; )
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm -d 96x95x39 -chimie INCA -v true -parallel mpi_omp  -arch $(FCM_ARCH) gcm ; cp bin/gcm_96x95x39_phylmd_para_orch_inca.e ../../bin/gcm.e ; )
+
+#aer_lmdz14414239:
+#	(cd ../../modeles/INCA; ./makeinca_fcm -chimie AER -parallel mpi_omp -resol 144x142x39 -arch $(FCM_ARCH); cp SIMULATIONS/AER/inca.dat ../../bin/inca.dat ; )	
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm -chimie INCA -d 144x142x39 -parallel mpi_omp -arch $(FCM_ARCH) ce0l ; cp bin/ce0l_144x142x39_phylmd_para_inca.e ../../bin/create_etat0_limit.e ; )
+#	(cd ../../modeles/LMDZ; ./makelmdz_fcm  -d 144x142x39 -chimie INCA -v true -parallel mpi_omp  -arch $(FCM_ARCH) gcm ; cp bin/gcm_144x142x39_phylmd_para_orch_inca.e ../../bin/gcm.e ; )
+
+clean :
+	(rm -rf $(LIBDIR)/* ; rm -f $(BINDIR)/* ; ) 
+	(rm -rf ../../modeles/LMDZ/libo/* ../../modeles/LMDZ/.lock ; ) 
+	(cd ../../modeles/IOIPSL/src ; ${M_K} clean ; ) 
+	(cd ../../ORCHIDEE ; ./makeorchidee_fcm -clean ; ) 
+	(rm -rf ../INCA/config ; )
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/AA_make.ldef
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/AA_make.ldef	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/AA_make.ldef	(revision 2330)
@@ -0,0 +1,11 @@
+#- $Id$
+#---------------------------------------------------------------------
+#- Initialisations for IPSLCM5 configuration
+#---------------------------------------------------------------------
+SHELL = /bin/sh
+#---------------------------------------------------------------------
+LIBDIR = ../../lib
+BINDIR = ../../bin
+MODDIR = $(LIBDIR)
+#---------------------------------------------------------------------
+#-
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/inca.card	(revision 2330)
@@ -0,0 +1,61 @@
+#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Set climatological to choose if the simulation will use online 10m wind (=y) or offline (=n)
+climatological=n
+# Set climatological to choose the write_frequency for inca output (inca_avgr, forcage, inca_inst)
+# 86400 = daily output
+freq_write_chem=86400
+# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
+feedb=0
+
+
+[InitialStateFiles]
+List= ()
+	
+[BoundaryFiles]
+List=	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/165_${year}${month}.nc      , u10mec.nc)\
+	    (/ccc/work/cont003/subipsl/subipsl/ECMWF320x160/AN${year}/166_${year}${month}.nc      , v10mec.nc)\
+	    (/ccc/work/cont003/subipsl/subipsl/ECMWF${RESOL_ATM_XY}/AN${year}/u10m_ecmwf_${year}${month}.nc , u10m.nc  )\
+	    (/ccc/work/cont003/subipsl/subipsl/ECMWF${RESOL_ATM_XY}/AN${year}/v10m_ecmwf_${year}${month}.nc , v10m.nc  )
+
+ListNonDel= (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/npp.nc		,   npp.nc		)\
+            (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/o3clim.nc	,   o3clim.nc		)\
+	    (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/so4.nc		,   so4.nc		)\
+            (/ccc/work/cont003/dsm/p86cozic/INPUT_NITRATE/aircraft_ar5_2000.nc		,   aircraft.nc    )\
+            (/ccc/work/cont003/dsm/p86cozic/INPUT_NITRATE/sflx_ar5_2000.nc		,   sflx.nc        )\
+	    (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/landuse.nc	,   landuse.nc		)\
+            (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/rhvEC.txt	,   rhvEC.txt		)\
+            (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/wthEC.txt	,   wthEC.txt		)\
+            (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/clyEC.txt	,   clyEC.txt		)\
+            (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/wth.dat		,   wth.dat		)\
+            (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/cly.dat		,   cly.dat		)\
+ 	    (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/rhv.dat		,   rhv.dat		)\
+	    (${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/phototable_glo.dat   ,   phototable.dat	)
+
+
+[ParametersFiles]
+List= (${SUBMIT_DIR}/PARAM/inca.def, .)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List= (precipinsoil.dat, precipinsoil.dat, precipinsoil.dat) 
+
+
+[OutputText]
+List=(inca.out, inca.def)
+
+[OutputFiles]
+List=	(inca_avgr.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_avgr.nc,    Post_1M_inca_avgr  ),\
+	(forcage.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_forcage.nc,      NONE)
+
+
+[Post_1M_inca_avgr]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter)
+TimeSeriesVars2D = (OD550_ASBCM, OD550_ASPOMM, OD550_ASSO4M, OD550_CSSO4M, OD550_SSSSM, OD550_ASSSM, OD550_CSSSM, OD550_CIDUSTM, OD550_AIBCM, OD550_AIPOMM)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CH4,NO,NO2,CO,O3,HNO3)
+ChunckJob3D = NONE
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/lmdz.card	(revision 2330)
@@ -0,0 +1,90 @@
+#- $Id: lmdz.card 70 2007-06-21 14:20:42Z acosce $
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# Physics package to use :
+# AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources with 19 or 39 levels
+# NPv3.1 for new physics, to be used with LMDZ5/trunk revision 1554 or later with 39 levels
+LMDZ_Physics=AP
+#LMDZ_Physics=NPv3.1
+
+
+LMDZ_NbPeriod_adjust=3
+# LMDZ_NbPeriod_adjust=0
+# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name
+#LMDZ_Bands_file_name=/ccc/store/cont003/dsm/p86cozic/IGCM_OUT/LMDZORINCA/NMHC_AER/L4OI3NA_39_Bands/ATM/Debug/L4OI3NA_39_Bands_Bands_96x95x39_32prc.dat_1
+
+# Set ConfType to choose parameters for aerosols, solar and green house gazes. 
+# The parameter file PARAM/config.def_$ConfType will be used.
+# ConfType=preind/actuel/annuel
+ConfType=Anne
+
+# manage radiative aerosol effect and ozone 
+flag_aerosol=6
+ok_ade=y
+ok_aie=n
+aerosol_couple=y
+read_climoz=0
+ok_cdnc=y
+
+# Set OutLevel to choose the level of output files from LMDZ. The file PARAM/output.def_$OutLevel will be used.
+# OutLevel=low/medium/high
+OutLevel=low
+
+# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=n
+LMDZ_COSP_daily=n
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=n
+LMDZ_NMC_daily=n
+LMDZ_NMC_hf=n
+
+
+# Nugding : ok_guide=y/n
+ok_guide=n
+
+
+[InitialStateFiles]
+# start and startphy are the clim files computed with CLIM_CREATE (create_etat0_limit) job
+List= 	(${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/start.nc	, start.nc	) \
+	(${R_INIT}/CHM/LMDZORINCA/INCA${RESOL_CHM}/startphy.nc	, startphy.nc	)
+
+
+[BoundaryFiles]
+List=   (${R_BC}/CHM/LMDZORINCA/${RESOL_ATM}_leap/EL-${RESOL_ATM}_${year}1231_limit.nc , limit.nc)
+
+#	(/ccc/work/cont003/subipsl/subipsl/ECMWF${RESOL_ATM_XY}/AN${year}/u_ecmwf_${year}${month}.nc 	, u.nc		),\
+#	(/ccc/work/cont003/subipsl/subipsl/ECMWF${RESOL_ATM_XY}/AN${year}/v_ecmwf_${year}${month}.nc 	, v.nc		)
+ 
+ListNonDel= ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}_${LMDZ_Physics}	, physiq.def	), \
+	(${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D}            	, gcm.def	), \
+	(${SUBMIT_DIR}/PARAM/run.def					, .		), \
+        (${SUBMIT_DIR}/PARAM/output.def_${OutLevel},                    output.def      ), \
+        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},                    config.def      ), \
+	(${SUBMIT_DIR}/PARAM/guide.def					, .		)
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc) 
+
+[OutputText]
+List=   (physiq.def, gcm.def, run.def, Bands_${BandsResol}_${NUM_PROC_ATM}prc.dat, config.def, output.def)
+
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )	
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/orchidee.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/orchidee.card	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/orchidee.card	(revision 2330)
@@ -0,0 +1,68 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+# The variable DefSuffix gives the suffix of the orchidee.def file to be used.
+# By default the file orchidee.def_Choi will be selected.
+# Sef DefSuffix=Choi (default) to activate default 2-layer Choisnel hydrology
+# Set DefSuffix=CWRR to activate 11-layer CWRR hydrology
+DefSuffix=Choi
+
+sechiba_LEVEL=11
+VEGET_UPDATE=1Y
+LAND_COVER_CHANGE=y
+
+[InitialStateFiles]
+List=	(${R_INIT}/SRF/LMDZORINCA/soils_param.nc,      . ), \
+	(${R_INIT}/SRF/LMDZORINCA/routing.nc,          . ), \
+	(${R_BC}/SRF/LMDZORINCA/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year}.nc, PFTmap.nc)
+## Pour les annees 2006-2100 suivant le RCP 
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP8.5_MESSAGE/PFTmap_IPCC_${year}.nc, PFTmap.nc)
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP4.5_MiniCAM//PFTmap_IPCC_${year}.nc, PFTmap.nc)
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP6.0_AIM//PFTmap_IPCC_${year}.nc, PFTmap.nc)
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP3-PD_IMAGE//PFTmap_IPCC_${year}.nc, PFTmap.nc)
+
+[BoundaryFiles]
+List= ()
+ListNonDel= ()
+
+[SmoothFiles]
+List=(${R_BC}/SRF/LMDZORINCA/PFTmap_1850to2005_AR5_LUHa.rc2/PFTmap_IPCC_${year_p1}.nc, PFTmap.nc, 12:12:)
+## Pour les annees 2006-2100 suivant le RCP 
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP8.5_MESSAGE/PFTmap_IPCC_${year_p1}.nc, PFTmap.nc, 12:12:)
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP4.5_MiniCAM//PFTmap_IPCC_${year_p1}.nc, PFTmap.nc, 12:12:)
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP6.0_AIM//PFTmap_IPCC_${year_p1}.nc, PFTmap.nc, 12:12:)
+#(${R_BC}/SRF/LMDZORINCA/PFTmap_2006to2100_AR5_RCP3-PD_IMAGE//PFTmap_IPCC_${year_p1}.nc, PFTmap.nc, 12:12:)
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def_${DefSuffix}, orchidee.def)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee, orchidee.def)
+
+[OutputFiles]
+List=	(sechiba_history.nc, ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_out_2.nc, ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc, Post_HF_sechiba_out_2), \
+        (orchidee_watchout.nc, ${R_OUT_SRF_O_M}/${PREFIX}_1M_watchout.nc, NONE)
+
+[Post_1M_sechiba_history]
+Patches= ()
+GatherWithInternal= (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac)
+TimeSeriesVars2D= (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac)
+ChunckJob2D= NONE
+TimeSeriesVars3D= (lai, maxvegetfrac, vegetfrac, CO2FLUX, ptn, nee)
+ChunckJob3D= NONE
+Seasonal= ON
+
+[Post_HF_sechiba_out_2]
+Patches= ()
+GatherWithInternal= (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac)
+TimeSeriesVars2D= (mrsos, mrro)
+ChunckJob2D= 50Y
+TimeSeriesVars3D= (ptn)
+ChunckJob3D= 10Y
+Seasonal= OFF
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/stomate.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/stomate.card	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/COMP/stomate.card	(revision 2330)
@@ -0,0 +1,47 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+stomate_LEVEL=10
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_BC}/SRF/LMDZORINCA/reftemp.nc, .)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=	(stomate_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc, Post_1M_stomate_history) \
+    (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches= ()
+GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bnds, Areas)
+TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CO2FLUX_MONTHLY,LAI,VEGET,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches= ()
+GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bnds, Areas, CONTFRAC)
+TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/config.card
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/config.card	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/EXPERIMENTS/LMDZORINCA/NMHC_AER/config.card	(revision 2330)
@@ -0,0 +1,150 @@
+#- $Id: config.card 69 2007-06-21 14:08:22Z acosce $
+#========================================================================
+#D-- Carte pour run AR5WERF -- 
+#D-- Les fichiers sflx - aircraft - start - startphy créés par S. Szopa
+#D--
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#========================================================================
+#D-- UserChoices -
+[UserChoices]
+#============================
+#D-- (<8 chars MAX for JobName)
+JobName=L5OI4run
+#SpaceName=TEST
+#ExperimentName=XXXX
+LongName='nouvelles configs + LMDZ5 INCA4 39 '
+TagName=LMDZORINCA/${CHEM}
+#D- Choice of experiment in EXPERIEMENTS directory
+ExpType=LMDZORINCA/NMHC_AER
+#============================
+#D-- leap, noleap, 360d
+CalendarType=leap
+#D-- Début et fin de Job
+#D-- "YYYY-MM-DD"
+DateBegin=2006-01-01
+DateEnd=2006-12-31
+#============================
+#D-- 1Y, 1M, 5D, 1D
+PeriodLength=1M
+#============================
+#-- PBS Class (required on brodie mono/multi)
+#JobClass=mono
+JobClass=multi
+#============================
+#-- Total Number of Processors (minimum is 2 for a coupled configuration)
+JobNumProcTot=32
+#============================
+#-- Run Options : here for oasis coupling
+#-- For Vargas
+#JobRunOptions=JobRunOptions=''
+#-- For Titane 
+JobRunOptions='"-np "${config_UserChoices_JobNumProcTot}'
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ4)
+SRF= (orchidee, orchidee_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+CHM= (inca, INCA3) 
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=gcm.e
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, gcm.e)
+SRF= ("", "")
+SBG= ("", "")
+CHM= (inca.dat, inca.dat)
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- If you want a GENERAL RULE FOR RESTARTS, put this flag to 'y'
+OverRule=n
+#D- Last day of the experience used as restart
+RestartDate=2005-12-31
+#D- Define restart simulation name (=> JOB_OS)
+RestartJobName=LOI_AR5WERF_E0_2006
+#D- Path Server Group Login (=> PSGL)
+RestartPath=/ccc/work/cont003/dsm/p24cozic/INPUT_INCA/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Attention login depend de la machine
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission
+RebuildFrequency=1Y
+#D- Do we rebuild parallel output from archive
+RebuildFromArchive=NONE
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission
+TimeSeriesFrequency=NONE
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average
+SeasonalFrequency=NONE
+#D-
+PackFrequency=1Y
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' all params are read
+Restart= n
+# Last day of the experience used as restart
+RestartDate=2000-01-01
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+# Old component name for restart (if empty, use new name)
+OldName=""
+
+
+#========================================================================
+#D-- SRF -
+[SRF]
+WriteFrequency="1M"
+Restart=n
+##-- Last day of the experience used as restart
+RestartDate=1999-12-30
+# Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+#-- Old component name for restart (if empty, use new name)
+OldName=""
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=2000-01-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZOR/DEVT/amip
+#-- Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- CHM -
+[CHM]
+WriteFrequency="1M"
+Restart=n
+#D-- Last day of the experience used as restart
+RestartDate=2000-01-01
+#D-- Define restart simulation name
+RestartJobName=JobName
+RestartPath=${ARCHIVE}/IGCM_OUT/LMDZORINCA/NMHC_AER
+#D-- Old component name for restart (if empty, use new name)
+OldName=""
+
+#========================================================================
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/lmdz.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/lmdz.driver	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/lmdz.driver	(revision 2330)
@@ -0,0 +1,694 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function LMDZ_sed
+{
+# Usage : LMDZ_sed filedef var_name myvalue
+#         In file filedef modify the line containing var_name=xxx into var_name=myvalue
+    IGCM_debug_PushStack "LMDZ_sed"
+    
+    # Test if the fichier exist
+    if [ ! -f ${1} ] ; then
+	echo "WARNING : ${1} file does not exist. Following will not be done : LMDZ_sed : ${1} ${2} ${3}"
+        IGCM_debug_PopStack "LMDZ_sed"
+	return
+    fi
+
+    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
+    RET=$?
+    echo "LMDZ_sed : ${1} ${2} ${3}"
+    \mv ${1}.tmp ${1}
+
+    IGCM_debug_PopStack "LMDZ_sed"
+    return $RET
+}
+function LMDZ_sed_default
+{
+# Usage : LMDZ_sed_default filedef var_name
+#         In file filedef modify the line  "var_name=xxx DEFAULT= myvalue"
+#         into "var_name=myvalue"
+    IGCM_debug_PushStack "LMDZ_sed_default"
+
+    DefValue=$( grep ${2} ${1}  | awk -F"DEFAULT.=*" '{print $2}')
+
+    LMDZ_sed  ${1} ${2} $DefValue
+    IGCM_debug_PopStack "LMDZ_sed_default"
+    return $RET
+}
+
+
+function ATM_Initialize
+{
+    IGCM_debug_PushStack "ATM_Initialize"
+
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x39
+
+    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
+    RESOL_ATM_X=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $1}' )
+    RESOL_ATM_Y=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $2}' )
+    RESOL_ATM_XY="${RESOL_ATM_X}x${RESOL_ATM_Y}"
+
+    ##-- Calendar type for LMDZ and create_etat0_limit
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+            CalendarTypeForLmdz=earth_366d
+	    CalendarTypeForCreate=gregorian;;
+        noleap)
+            CalendarTypeForLmdz=earth_365d
+            CalendarTypeForCreate=${CalendarTypeForLmdz};;
+        360d)
+            CalendarTypeForLmdz=earth_360d
+            CalendarTypeForCreate=${CalendarTypeForLmdz};;
+        *)
+            CalendarTypeForLmdz=earth_360d
+            CalendarTypeForCreate=${CalendarTypeForLmdz}
+    esac
+
+    ##- LMDZ physics version
+    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics) 
+    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
+	LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
+    else
+	LMDZ_Physics=AP
+    fi
+    echo LMDZ physics version : ${LMDZ_Physics}
+
+    ##- Create_etat0_limit version
+    ##  Define variable CREATE only if it is set in lmdz.card section UserChoices.
+    ##  This variable is only used in lmdz.card to choose input files.
+    if [ ! X${lmdz_UserChoices_CREATE} = X ] ; then
+	IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices CREATE
+	CREATE=${lmdz_UserChoices_CREATE}
+	echo create_etat0_limit version : ${CREATE}
+    fi
+
+
+    ## - LMDZ choice of config.def file
+    ##   ConfType must be set in lmdz.card
+    ConfType=${lmdz_UserChoices_ConfType}
+
+    ##- LMDZ output level, to be set in lmdz.card
+    if [ X${lmdz_UserChoices_OutLevel} = X ] ; then
+	# OutLevel is not set. Take default value low.
+	OutLevel=low
+    else
+	OutLevel=${lmdz_UserChoices_OutLevel}
+    fi
+
+    ##-- Output frequency purpose ....
+    ##--  Initialisation  ....
+    ok_mensuel=n
+    ok_journe=n
+    ok_hf=n
+    ok_hf3h=n
+    ok_hf3hm=n
+    ok_stn=n
+
+    case ${config_UserChoices_PeriodLength} in
+	1Y|1y|1M|1m) ok_mensuel=y ;;
+	5D|5d|1D|1d) ok_journe=y ;;
+    esac
+
+    for frequency in ${config_ATM_WriteFrequency} ; do
+	case ${frequency} in
+	    1M|1m) ok_mensuel=y ;;
+	esac
+	case ${frequency} in
+	    5D|5d|1D|1d) ok_journe=y ;;
+	esac
+	case ${frequency} in
+	    HF|hf) ok_hf=y ;;
+	esac
+	case ${frequency} in 
+	    HF3h|hf3h) ok_hf3h=y ;;
+	esac
+	case ${frequency} in 
+	    HF3hm|hf3hm) ok_hf3hm=y ;;
+	esac
+	case ${frequency} in
+	    STN|stn) ok_stn=y ;;
+	esac
+    done
+
+    ## Read LMDZ_NbPeriod_adjust option in lmdz.card 
+    if [ X"${lmdz_UserChoices_LMDZ_NbPeriod_adjust}" = X"" ] ; then
+	# The variable is not in lmdz.card, set default value
+	LMDZ_NbPeriod_adjust=0
+    else	
+	LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
+    fi
+
+    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
+	LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
+    fi
+
+
+    ##  Read LMDZ_COSP_OK in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_OK} = X ] ; then
+	LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
+    else
+	LMDZ_COSP_OK=n
+    fi
+    ##  Read LMDZ_COSP_monthly in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_monthly} = X ] ; then
+	LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
+    else
+	LMDZ_COSP_monthly=n
+    fi
+    ##  Read LMDZ_COSP_daily in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_daily} = X ] ; then
+	LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
+    else
+	LMDZ_COSP_daily=n
+    fi
+    ##  Read LMDZ_COSP_hf in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_COSP_hf} = X ] ; then
+	LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
+    else
+	LMDZ_COSP_hf=n
+    fi
+
+    ##  Read LMDZ_NMC_monthly in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_NMC_monthly} = X ] ; then
+	LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
+    else
+	LMDZ_NMC_monthly=n
+    fi
+
+    ## Read LMDZ_NMC_daily in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_NMC_daily} = X ] ; then
+	LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
+    else
+	LMDZ_NMC_daily=n
+    fi
+    
+    ## Read LMDZ_NMC_hf in lmdz.card
+    if [ ! X${lmdz_UserChoices_LMDZ_NMC_hf} = X ] ; then
+	LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
+    else
+	LMDZ_NMC_hf=n
+    fi
+
+
+    IGCM_debug_PopStack "ATM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function ATM_Update
+{
+    IGCM_debug_PushStack "ATM_Update"
+
+
+    case ${config_UserChoices_PeriodLength} in
+        *Y|*y) 
+               LMDZ_ecrit_ISCCP=30.
+               LMDZ_periodav=30.
+               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
+                  echo Do not consider following warning if your running create_etat0_limit :
+                  echo WARNING !!! For lmdz : calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d 
+	       fi
+               ;;
+        *)
+               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
+               LMDZ_periodav=${PeriodLengthInDays}.
+               ;;
+    esac
+  
+    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	RAZ_DATE=1
+    else
+	RAZ_DATE=0
+    fi
+
+    ## Algorithme for special treatment for Bands_xxx file
+    ## For CumulPeriod=1 ; 
+    ##        IF NbPeriod_Adjust = 0 ; set LMDZ_adjust=n
+    ##                                IF LMDZ_Bands_file_name was given in lmdz.card THEN Get Bands file directly from server. Store it later with _0 suffix.
+    ##                                IF no LMDZ_Bands_file_name was given, start without Bands file. Store it later with _0 suffix.
+    ##        ELSE set LMDZ_adjust=y ; start without Bands file ; Store it later in PARAM/ directory in submit directory with suffix _1 ;
+    ##
+    ## For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; 
+    ##       Get Bands file from PARAM/ in submit directory (CumulPeriod-1) ; set LMDZ_adjust=y ; Store Bands file in PARAM/ ;
+    ##
+    ## For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from PARAM/ ; Do not store ;
+
+    if [ ${CumulPeriod} -eq 1 ] ; then
+        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
+	    if [ ! X${LMDZ_Bands_file_name} = X ] ; then
+		IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat 
+		IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
+		IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
+	    fi
+        fi
+    fi
+
+    LMDZ_adjust=n
+    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
+
+    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
+    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
+
+    # Get Bands file from PARAM directory if file exist
+    if ( [ ${CumulPeriod} -gt 1 ] && [ -f ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} ] ) ; then
+        IGCM_sys_Cp ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
+        IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
+    fi
+
+    ##-- GHG forcing :
+    ##   If forcing file exist in run directory, read values for the current year 
+    ##   and set in config.def. If not use the default value set in config.def
+    if [ -f SOLARANDVOLCANOES.txt ] ; then
+	IPCC_SOLAR=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
+	if [ X"${IPCC_SOLAR}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file SOLARANDVOLCANOES.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	else
+	    # Set new variable in config.def file
+	    LMDZ_sed config.def solaire     ${IPCC_SOLAR}
+	fi
+    else
+	LMDZ_sed_default config.def solaire
+    fi
+
+    if [ -f CO2.txt ] ; then
+	IPCC_CO2=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
+	if [ X"${IPCC_CO2}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CO2.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	else
+	    # Set new variable in config.def file
+	    LMDZ_sed config.def co2_ppm     ${IPCC_CO2}
+	fi
+    else
+	LMDZ_sed_default config.def co2_ppm
+    fi
+
+    if [ -f CH4.txt ] ; then
+	IPCC_CH4=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
+	if [ X"${IPCC_CH4}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CH4.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	else
+	    # Set new variable in config.def file
+	    LMDZ_sed config.def CH4_ppb     ${IPCC_CH4}
+	fi
+     else
+	LMDZ_sed_default config.def CH4_ppb
+    fi
+
+    if [ -f N2O.txt ] ; then
+	IPCC_N2O=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
+	if [ X"${IPCC_N2O}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file N2O.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	else
+	    # Set new variable in config.def file
+	    LMDZ_sed config.def N2O_ppb     ${IPCC_N2O}
+	fi
+    else
+	LMDZ_sed_default config.def N2O_ppb
+    fi
+
+    if [ -f CFC11.txt ] ; then
+	IPCC_CFC11=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
+	if [ X"${IPCC_CFC11}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC11.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	else
+	    # Set new variable in config.def file
+	    LMDZ_sed config.def CFC11_ppt   ${IPCC_CFC11}
+	fi
+    else
+	LMDZ_sed_default config.def CFC11_ppt
+    fi
+
+    if [ -f CFC12.txt ] ; then
+	IPCC_CFC12=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
+	if [ X"${IPCC_CFC12}" = X ] ; then
+	    # The grep returned empty variable, stop execution
+	    IGCM_debug_Exit "The file CFC12.txt do not contain the current year."
+	    IGCM_debug_Verif_Exit
+	else
+	    # Set new variable in config.def file
+	    LMDZ_sed config.def CFC12_ppt   ${IPCC_CFC12}
+	fi
+    else
+	LMDZ_sed_default config.def CFC12_ppt
+    fi
+
+
+    ##-- Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Update
+    fi
+
+
+    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate 
+    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
+    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
+	LMDZ_COSP_daily=y
+    fi
+
+
+    ## output.def parameters
+    #  columns in phys_output_filekeys refer to the filenames given in phys_out_filenames in output.def :  
+    #                                            histmth       histday        histhf    histfh3h   histhf3hm   histstn
+    LMDZ_sed output.def phys_out_filekeys       "${ok_mensuel} ${ok_journe}   ${ok_hf}  ${ok_hf3h} ${ok_hf3hm} ${ok_stn}"
+    LMDZ_sed output.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
+    LMDZ_sed output.def ok_cosp     ${LMDZ_COSP_OK}
+    LMDZ_sed output.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
+    LMDZ_sed output.def ok_journeCOSP   ${LMDZ_COSP_daily}
+    LMDZ_sed output.def ok_hfCOSP   ${LMDZ_COSP_hf}
+    LMDZ_sed output.def ok_histNMC  "${LMDZ_NMC_monthly} ${LMDZ_NMC_daily} ${LMDZ_NMC_hf}"
+
+    ## gcm.def parameters : 
+    # Modification only for new physics
+    if [ X${LMDZ_Physics} = X"NPv3.1" ] ; then
+	LMDZ_sed gcm.def iphysiq     5
+    else
+	LMDZ_sed_default gcm.def iphysiq
+    fi
+
+
+    ## run.def parameters
+    LMDZ_sed run.def dayref   ${InitDay}
+    LMDZ_sed run.def nday     ${PeriodLengthInDays}
+    LMDZ_sed run.def raz_date ${RAZ_DATE}
+    LMDZ_sed run.def periodav ${LMDZ_periodav}
+    LMDZ_sed run.def adjust   ${LMDZ_adjust}
+
+    # Set anneeref different for gcm and ce0l
+    # Variable calend is different for a run with create_etat0_limit and the gcm
+    # Test if executable create_etat0_limit is present and lmdz.x is not present
+    if [ -f create_etat0_limit* ] || [ -f ce0l* ] && [ ! -f lmdz.x ] ; then
+	# for case ce0l : always take current year
+	LMDZ_sed run.def anneeref ${year}
+	LMDZ_sed run.def calend   ${CalendarTypeForCreate}
+    else
+	# for case gcm : take first year of simulation
+	LMDZ_sed run.def anneeref ${InitYear}
+	LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
+    fi
+
+    # Activate creation of file grilles_gcm.nc only at first period
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	LMDZ_sed run.def grilles_gcm_netcdf y
+    else
+	LMDZ_sed run.def grilles_gcm_netcdf n
+    fi
+
+    ## Determine from the variable ListOfComponents in config.card coupling to external models 
+    ## and set corresponding parameters in run.def
+    echo ListOfComponents now running : ${config_ListOfComponents[*]}
+
+    if [ X${config_ListOfComponents_SRF} = Xorchidee ] ; then
+	echo "Activate ORCHIDEE, set VEGET=y in run.def"
+	LMDZ_sed run.def VEGET y
+    else
+	echo "No ORCHIDEE, set VEGET=n in run.def"
+	LMDZ_sed run.def VEGET n
+    fi
+
+    if [ X${config_ListOfComponents_CPL} = Xoasis ] ; then
+	echo "Activate coupling to ocean, set type_ocean=couple in run.def"
+	LMDZ_sed run.def type_ocean couple
+    else
+	echo "LMDZ is running in forced mode without ocean model, set type_ocean=force in run.def"
+	LMDZ_sed run.def type_ocean force
+    fi
+
+    if [ X${config_ListOfComponents_CHM} = Xinca ] ; then
+	echo "Activate coupling to INCA, set type_trac=inca in run.def"
+	LMDZ_sed run.def type_trac inca
+    elif [ X${config_ListOfComponents_CHM} = Xreprobus ] ; then
+	echo "Activate coupling to REPROBUS, set type_trac=repr in run.def"
+	LMDZ_sed run.def type_trac repr
+        LMDZ_sed run.def config_inca none
+    else
+	echo "No coupling to chemistry model, set type_trac=lmdz in run.def"
+	LMDZ_sed run.def type_trac lmdz
+        LMDZ_sed run.def config_inca none
+    fi
+
+
+    # config.def : Activate direct radiative effect if ok_ade=y
+    if [ ! X${lmdz_UserChoices_ok_ade} = X ]; then 
+	LMDZ_sed config.def ok_ade ${lmdz_UserChoices_ok_ade}
+    else
+	LMDZ_sed config.def ok_ade n
+    fi 
+
+    # config.def : Activate indirect radiative effect if ok_aie=y
+    if [ ! X${lmdz_UserChoices_ok_aie} = X ]; then 
+	LMDZ_sed config.def ok_aie ${lmdz_UserChoices_ok_aie}
+    else
+	LMDZ_sed config.def ok_aie n
+    fi 
+
+    # config.def : Activate online aerosol coupled model if aerosol_couple=y
+    if [ ! X${lmdz_UserChoices_aerosol_couple} = X ]; then 
+	LMDZ_sed config.def aerosol_couple ${lmdz_UserChoices_aerosol_couple}
+    else
+	LMDZ_sed config.def aerosol_couple n
+    fi 
+
+    # config.def : Activate reading of ozone in climatology if read_climoz=2
+    if [ ! X${lmdz_UserChoices_read_climoz} = X ]; then 
+	LMDZ_sed config.def read_climoz ${lmdz_UserChoices_read_climoz}
+    else
+	LMDZ_sed config.def read_climoz 0	
+    fi 
+
+    # config.def : Choose aerosol use in radiative effect 
+    #  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only 
+    # =5 => dust only =6 => all aerosol    
+    if [ ! X${lmdz_UserChoices_flag_aerosol} = X ]; then 
+	LMDZ_sed config.def flag_aerosol ${lmdz_UserChoices_flag_aerosol}
+    else
+	LMDZ_sed config.def flag_aerosol 0
+    fi 
+
+    # config.def : Activate calcul of Cloud droplet number concentration if ok_cdnc=y
+    if [ ! X${lmdz_UserChoices_ok_cdnc} = X ]; then 
+	LMDZ_sed config.def ok_cdnc ${lmdz_UserChoices_ok_cdnc}
+    else
+	LMDZ_sed config.def ok_cdnc n	
+    fi 
+
+    # guide.def : Activate nudging if ok_guide=y set in lmdz.card
+    if [ ! X${lmdz_UserChoices_ok_guide} = X ] ; then
+	LMDZ_sed guide.def ok_guide  ${lmdz_UserChoices_ok_guide}
+    else
+	LMDZ_sed guide.def ok_guide n
+    fi
+
+    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
+    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
+    if [ X"${ByPass_hgardfou_teta}" = X"y" ] ; then
+	awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
+	IGCM_sys_Mv gcm.def.tmp gcm.def
+	echo
+	IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
+	echo
+	cat gcm.def
+	ByPass_hgardfou_teta=n
+	IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
+    fi
+
+    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
+    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
+    if [ X"${ByPass_hgardfou_mats}" = X"y" ] ; then
+	sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
+        IGCM_sys_Mv gcm.def.tmp gcm.def
+        echo
+        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
+        echo
+        cat gcm.def
+        ByPass_hgardfou_mats=n
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
+    fi
+
+    # Add include of LMDZ context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="LMDZ" src="./context_lmdz.xml"/>
+    echo '<context id="LMDZ" src="./context_lmdz.xml"/>' > add.tmp
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" \
+	iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+
+    IGCM_debug_PopStack "ATM_Update"
+}
+
+#-----------------------------------
+function ATM_Finalize
+{
+    IGCM_debug_PushStack "ATM_Finalize"
+
+    # If the file exist, copy Bands_ file to PARAM/ in submit directory. This file will be used for the simulation.
+    # Copy also the same file into ATM/Restart at ARCHIVE directory for backup.
+    if [ -f Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ] ; then 
+      if [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] ; then
+        IGCM_sys_Cp Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
+        IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_R}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
+      elif [ ${CumulPeriod} -eq 1 ] && [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
+        # Special case : first period and no adjust => Save bands file with suffix _0
+        IGCM_sys_Cp Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${SUBMIT_DIR}/PARAM/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
+        IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_R}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
+      fi
+    fi
+
+    # Add special treatement for CARBON CYCLE
+    if [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"control" ] || [ X"${lmdz_UserChoices_CARBON_CYCLE}" = X"historical" ] ; then
+	ATM_Carbon_Finalize
+    fi
+
+    echo FINALIZE ATM !
+
+    IGCM_debug_PopStack "ATM_Finalize"
+}
+
+
+
+function ATM_Carbon_Update
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Update"
+
+    typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
+    typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    typeset PathCO2log 
+    typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
+    
+    if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ] ) ; then
+        ##--Initialization of fluxes to an undefined value at the first run
+	UndefinedValueCo2=-9999
+	InitPeriodCo2=0
+	InitDateBeginCo2=${UndefinedValueCo2}
+	InitYearCo2=$(( ${year} - 1 )) 
+	InitDateEndCo2=${InitYearCo2}1231
+	fCO2_ff=${UndefinedValueCo2} 
+	CO2SBG=${UndefinedValueCo2}
+	CO2LU=${UndefinedValueCo2}
+	CO2MBG=${UndefinedValueCo2}
+	CO2_ppm_prec=${UndefinedValueCo2}
+        # Get the initial value of atmosp. pco2 
+	CO2_ppm=${lmdz_UserChoices_co2_init}
+	
+	IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+	echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	
+        # Get the path where the log file co2.log is
+	PathCO2log=${SUBMIT_DIR} 
+        # Get Previous line in co2.log
+	PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+	
+    else
+	
+	# NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
+        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
+	#SubmitRestartPath=
+	if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ] ) ; then
+	    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
+	    PathCO2log=${config_ATM_SubmitRestartPath}
+	    Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
+	    PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
+	    
+	    IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
+	    IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
+	    
+            # Save Last Line of control in new co2.log file
+	    InitPeriodCo2=0   
+	    InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
+	    InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
+	    fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
+	    CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
+	    CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
+	    CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
+	    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	    
+	    echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+		gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+	else
+           # Get restart line in co2.log
+	    PathCO2log=${SUBMIT_DIR}
+	    PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
+           # Get the value of atmosp. pco2 in co2.log
+	    CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+	fi
+	
+    fi
+    
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
+	    # Modify co2_ppm in config.def only for historical run
+	    # If not historical run, keep co2_ppm value set earlier by LMDZ_sed
+	LMDZ_sed config.def co2_ppm     ${CO2_ppm}
+    fi
+    IGCM_debug_PopStack "ATM_Carbon_Update"
+}
+
+
+function ATM_Carbon_Finalize
+{
+    # This fuction will be called only if CARBON_CYCLE is set to control or historical in lmdz.card
+
+    IGCM_debug_PushStack "ATM_Carbon_Finalize"
+
+    typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
+    
+	# Fossil fuel emission
+    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
+            # For Control, no fossil fuel emission :
+	fCO2_ff=0
+	echo "Fossil Fuel for control run  :" ${fCO2_ff}
+    else
+            # For historical, get the fossile fuel file :
+	fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
+	echo "Fossil Fuel for historical run  :" ${fCO2_ff}
+    fi
+    
+        # Get the value of ocean carbon flux
+    CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
+    CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
+    echo "Ocean carbon flux  :" ${CO2MBG}
+    
+        # Get the value of land fluxes
+    set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
+    CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
+    CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
+    CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
+    echo "Land carbon flux (NEP)         :" ${CO2SRF}
+    echo "LU flux          (FLUC)        :" ${CO2LU}
+    echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
+    
+        # Previous CO2
+    CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
+    echo "Previous CO2  :" ${CO2_ppm_prec}
+    
+        # Formula
+    CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
+    echo "New CO2  :" ${CO2_ppm}
+    
+        # Save CO2 values in ExeCpuLog variable contents 5 fields
+    echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
+	gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
+                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
+    
+    IGCM_debug_PopStack "ATM_Carbon_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/orchidee.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/orchidee.driver	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/orchidee.driver	(revision 2330)
@@ -0,0 +1,155 @@
+#!/bin/ksh
+
+#D- Driver du script pour ORCHIDEE
+
+function ORCHIDEE_sed
+{
+    IGCM_debug_PushStack "ORCHIDEE_sed"
+    
+    sed -e "s/^${1}\ *=.*/${1}= ${2}/" \
+	orchidee.def > orchidee.def.tmp
+    RET=$?
+    echo "ORCHIDEE_sed : ${1} ${2}"
+    \mv orchidee.def.tmp orchidee.def
+    
+    IGCM_debug_PopStack "ORCHIDEE_sed"
+    return $RET
+}
+
+#-----------------------------------------------------------------
+function SRF_Initialize
+{
+    IGCM_debug_PushStack "SRF_Initialize"
+
+    RESOL_SRF=ALL
+
+    for frequency in ${config_SRF_WriteFrequency} ; do
+        case ${frequency} in
+            HF|hf) SRF_ok_hf=y ;;
+        esac
+    done
+
+    ##- Define variable DefSuffix set in orchidee.card
+    ##  This variable is used in orchidee.card to choose 
+    ##  parameter file(orchidee.def_DefSuffix). 
+    if [ ! X${orchidee_UserChoices_DefSuffix} = X ] ; then
+	DefSuffix=${orchidee_UserChoices_DefSuffix}
+    else
+	DefSuffix=Choi
+    fi
+
+    IGCM_debug_PopStack "SRF_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SRF_Update
+{
+    IGCM_debug_PushStack "SRF_Update"
+
+    typeset SECHIBA_WRITE_STEP
+
+    SRF_WriteFrequency=$( echo ${config_SRF_WriteFrequency} | sed -e 's/\([0-9]*[yYmMdDs]\).*/\1/' ) 
+    case ${SRF_WriteFrequency} in
+	*Y|*y) 
+	    WriteInYears=$( echo ${SRF_WriteFrequency} | awk -F '[yY]' '{print $1}' )
+	    PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+	    (( SECHIBA_WRITE_STEP = PeriodLengthInDays * WriteInYears / PeriodLengthInYears * 86400 )) ;;
+	1M)
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		SECHIBA_WRITE_STEP=-1.
+		;;
+	    *M|*m)
+		SECHIBA_WRITE_STEP=-1.
+		;;
+	    *)
+		(( SECHIBA_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) * 86400 ))
+		;;
+	    esac
+	    ;;
+	*M|*m) 
+	    WriteInMonths=$( echo ${SRF_WriteFrequency} | awk -F '[mM]' '{print $1}' )
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+		(( SECHIBA_WRITE_STEP = PeriodLengthInDays * 86400 / PeriodLengthInYears / 12  ))
+		;;
+	    *M|*m)
+		PeriodLengthInMonths=$( echo ${config_UserChoices_PeriodLength} | awk -F '[mM]' '{print $1}' )
+		(( SECHIBA_WRITE_STEP = PeriodLengthInDays * WriteInMonths  * 86400 / PeriodLengthInMonths  ))
+		;;
+	    *)
+		(( SECHIBA_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) * 86400 ))
+		;;
+	    esac
+	    ;;
+	5D|5d) 
+	    (( SECHIBA_WRITE_STEP = 5 * 86400 )) ;;
+	1D|1d) 
+	    (( SECHIBA_WRITE_STEP = 86400 )) ;;
+	*s)
+	    WriteInSeconds=$( echo ${SRF_WriteFrequency} | awk -F '[s]' '{print $1}' )
+	    (( SECHIBA_WRITE_STEP = WriteInSeconds )) ;;
+	*) 
+	    IGCM_debug_Exit "SRF_Update " ${SRF_WriteFrequency} " invalid WriteFrequency : choose in 1Y, 1M, 5D, 1D." 
+	    IGCM_debug_Verif_Exit ;;
+    esac
+
+    ORCHIDEE_sed WRITE_STEP ${SECHIBA_WRITE_STEP}
+    ORCHIDEE_sed SECHIBA_HISTLEVEL ${orchidee_UserChoices_sechiba_LEVEL}
+
+    # Outputs HF in HISTFILE2 if required
+    if [ X${SRF_ok_hf} = Xy ] ; then
+	ORCHIDEE_sed SECHIBA_HISTFILE2 y
+    else
+	ORCHIDEE_sed SECHIBA_HISTFILE2 n
+    fi
+    ORCHIDEE_sed SECHIBA_HISTLEVEL2 1
+    ORCHIDEE_sed WRITE_STEP2 10800.0
+
+    if ( [ ${CumulPeriod} -ne 1 ] || [ "${config_SRF_Restart}" != "n" ] ) ; then
+	ORCHIDEE_sed SECHIBA_restart_in sechiba_rest_in.nc
+    else
+	ORCHIDEE_sed SECHIBA_restart_in NONE
+    fi
+
+# Modify in orchidee.def VEGET_UPDATE and LAND_COVER_CHANGE if they are set in orchidee.card section UserChoices
+    if [ ! X${orchidee_UserChoices_VEGET_UPDATE} = X ] ; then
+	ORCHIDEE_sed VEGET_UPDATE   ${orchidee_UserChoices_VEGET_UPDATE}
+    else
+	ORCHIDEE_sed VEGET_UPDATE 0Y
+    fi
+    if [ ! X${orchidee_UserChoices_LAND_COVER_CHANGE} = X ] ; then
+	ORCHIDEE_sed LAND_COVER_CHANGE ${orchidee_UserChoices_LAND_COVER_CHANGE}
+    else
+	ORCHIDEE_sed LAND_COVER_CHANGE n
+    fi
+
+    #IGCM_sys_Cp ${RUN_DIR}/orchidee.def ${RUN_DIR}/run.def
+    #IGCM_sys_Put_Out ${RUN_DIR}/run.def ${R_SAVE}/${PREFIX}_run.def
+
+
+    # Add include of orchidee context in iodef.xml
+    # In iodef.xml add on next line after "COMPONENT CONTEXT"
+    #  <context id="orchidee" src="./context_orchidee.xml"/>
+    echo '<context id="orchidee" src="./context_orchidee.xml"/>' > add.tmp
+    cp iodef.xml iodef.xml.tmp
+    sed -e "/COMPONENT CONTEXT/r add.tmp" \
+	iodef.xml.tmp > iodef.xml
+    rm iodef.xml.tmp add.tmp
+
+
+    IGCM_debug_PopStack "SRF_Update"
+}
+
+#-----------------------------------------------------------------
+function SRF_Finalize
+{
+    IGCM_debug_PushStack "SRF_Finalize"
+
+    #IGCM_sys_Put_Out ${RUN_DIR}/used_run.def ${R_SAVE}/${PREFIX}_used_run.def
+
+    echo FINALIZE SRF !!!
+
+    IGCM_debug_PopStack "SRF_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/stomate.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/stomate.driver	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/stomate.driver	(revision 2330)
@@ -0,0 +1,95 @@
+#!/bin/ksh
+
+#D- Driver du script pour ORCHIDEE
+
+#-----------------------------------------------------------------
+function SBG_Initialize
+{
+    IGCM_debug_PushStack "SBG_Initialize"
+
+    RESOL_SBG=ALL
+    
+    IGCM_debug_PopStack "SBG_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SBG_Update
+{
+    IGCM_debug_PushStack "SBG_Update"
+
+    typeset STOMATE_WRITE_STEP
+
+    case ${config_SBG_WriteFrequency} in
+	*Y|*y) 
+	    WriteInYears=$( echo ${config_SBG_WriteFrequency} | awk -F '[yY]' '{print $1}' )
+	    PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+	    (( STOMATE_WRITE_STEP = PeriodLengthInDays * WriteInYears / PeriodLengthInYears )) ;;
+	1M|1m) 
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		STOMATE_WRITE_STEP=-1.
+		;;
+	    *M|*m)
+		STOMATE_WRITE_STEP=-1.
+		;;
+	    *)
+		(( STOMATE_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) )) ;;
+	    esac
+	    ;;
+	*M|*m) 
+	    WriteInMonths=$( echo ${config_SBG_WriteFrequency} | awk -F '[mM]' '{print $1}' )
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+		(( STOMATE_WRITE_STEP = 30 ))
+		;;
+	    *M|*m)
+		PeriodLengthInMonths=$( echo ${config_UserChoices_PeriodLength} | awk -F '[mM]' '{print $1}' )
+		(( STOMATE_WRITE_STEP = PeriodLengthInDays * WriteInMonths / PeriodLengthInMonths ))
+		;;
+	    *)
+		(( STOMATE_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) )) ;;
+	    esac
+	    ;;
+	5D|5d) 
+	    (( STOMATE_WRITE_STEP = 5 )) ;;
+	1D|1d) 
+	    (( STOMATE_WRITE_STEP = 1 )) ;;
+	*s)
+	    WriteInSeconds=$( echo ${config_SBG_WriteFrequency} | awk -F '[s]' '{print $1}' )
+	    (( STOMATE_WRITE_STEP = 1 )) ;;
+	*) 
+	    IGCM_debug_Exit "SBG_Update " ${config_SBG_WriteFrequency} " invalid WriteFrequency : choose in 1Y, 1M, 5D, 1D." 
+	    IGCM_debug_Verif_Exit ;;
+    esac
+
+    ORCHIDEE_sed STOMATE_OK_STOMATE y
+
+    ORCHIDEE_sed STOMATE_HIST_DT ${STOMATE_WRITE_STEP}
+    ORCHIDEE_sed STOMATE_HISTLEVEL ${stomate_UserChoices_stomate_LEVEL}
+
+    if ( [ ${CumulPeriod} -eq 1 ] && [ "${config_SBG_Restart}" = "n" ] ) ; then
+	echo "STOMATE : without restart"
+	ORCHIDEE_sed STOMATE_RESTART_FILEIN NONE
+    else
+	ORCHIDEE_sed STOMATE_RESTART_FILEIN stomate_rest_in.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Update"
+}
+
+#-----------------------------------------------------------------
+function SBG_Finalize
+{
+#set -vx
+    IGCM_debug_PushStack "SBG_Finalize"
+
+    if [ $( IGCM_date_DaysBetweenGregorianDate ${PeriodDateEnd} ${year}1230 ) -ge 0 ] ; then
+	IGCM_sys_Put_Out stomate_Cforcing.nc ${R_OUT_SBG_R}/${config_UserChoices_JobName}_${PeriodDateEnd}_stomate_Cforcing.nc
+	IGCM_sys_Put_Out stomate_forcing.nc  ${R_OUT_SBG_R}/${config_UserChoices_JobName}_${PeriodDateEnd}_stomate_forcing.nc
+# 	rm -f stomate_Cforcing.nc
+# 	rm -f stomate_forcing.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/xios.driver
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/xios.driver	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/DRIVER/xios.driver	(revision 2330)
@@ -0,0 +1,38 @@
+#!/bin/ksh
+
+#-----------------------------------
+function IOS_Initialize
+{ 
+    IGCM_debug_PushStack "IOS_Initialize"
+
+    echo INITIALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Initialize"
+}
+
+#-----------------------------------
+function IOS_Update
+{
+    IGCM_debug_PushStack "IOS_Update"
+
+    echo UPDATE IOS !!!
+
+    sed -e 's/<variable id="using_server"              type="boolean">false/<variable id="using_server" type="boolean">true/' iodef.xml > iodef.xml.tmp
+    IGCM_sys_Mv iodef.xml.tmp iodef.xml
+    if [ -f namcouple ] ; then
+	sed -e "s/2  lmdz.x oceanx/3 lmdz.x oceanx ${config_Executable_IOS[1]}/" namcouple > namcouple.tmp 
+	IGCM_sys_Mv namcouple.tmp namcouple
+    fi
+
+    IGCM_debug_PopStack "IOS_Update"
+}
+
+#-----------------------------------
+function IOS_Finalize
+{
+    IGCM_debug_PushStack "IOS_Finalize"
+
+    echo FINALIZE IOS !!!
+
+    IGCM_debug_PopStack "IOS_Finalize"
+}
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt	(revision 2330)
@@ -0,0 +1,3085 @@
+year    month  gridsum (PgC/mth)
+1751    01     0.00021
+1751    02     0.00021
+1751    03     0.00021
+1751    04     0.00021
+1751    05     0.00021
+1751    06     0.00021
+1751    07     0.00021
+1751    08     0.00021
+1751    09     0.00021
+1751    10     0.00021
+1751    11     0.00021
+1751    12     0.00021
+1752    01     0.00021
+1752    02     0.00021
+1752    03     0.00021
+1752    04     0.00021
+1752    05     0.00021
+1752    06     0.00021
+1752    07     0.00021
+1752    08     0.00021
+1752    09     0.00021
+1752    10     0.00021
+1752    11     0.00021
+1752    12     0.00021
+1753    01     0.00021
+1753    02     0.00021
+1753    03     0.00021
+1753    04     0.00021
+1753    05     0.00021
+1753    06     0.00021
+1753    07     0.00021
+1753    08     0.00021
+1753    09     0.00021
+1753    10     0.00021
+1753    11     0.00021
+1753    12     0.00021
+1754    01     0.00021
+1754    02     0.00021
+1754    03     0.00021
+1754    04     0.00021
+1754    05     0.00021
+1754    06     0.00021
+1754    07     0.00021
+1754    08     0.00021
+1754    09     0.00021
+1754    10     0.00021
+1754    11     0.00021
+1754    12     0.00021
+1755    01     0.00021
+1755    02     0.00021
+1755    03     0.00021
+1755    04     0.00021
+1755    05     0.00021
+1755    06     0.00021
+1755    07     0.00021
+1755    08     0.00021
+1755    09     0.00021
+1755    10     0.00021
+1755    11     0.00021
+1755    12     0.00021
+1756    01     0.00023
+1756    02     0.00023
+1756    03     0.00023
+1756    04     0.00023
+1756    05     0.00023
+1756    06     0.00023
+1756    07     0.00023
+1756    08     0.00023
+1756    09     0.00023
+1756    10     0.00023
+1756    11     0.00023
+1756    12     0.00023
+1757    01     0.00023
+1757    02     0.00023
+1757    03     0.00023
+1757    04     0.00023
+1757    05     0.00023
+1757    06     0.00023
+1757    07     0.00023
+1757    08     0.00023
+1757    09     0.00023
+1757    10     0.00023
+1757    11     0.00023
+1757    12     0.00023
+1758    01     0.00023
+1758    02     0.00023
+1758    03     0.00023
+1758    04     0.00023
+1758    05     0.00023
+1758    06     0.00023
+1758    07     0.00023
+1758    08     0.00023
+1758    09     0.00023
+1758    10     0.00023
+1758    11     0.00023
+1758    12     0.00023
+1759    01     0.00023
+1759    02     0.00023
+1759    03     0.00023
+1759    04     0.00023
+1759    05     0.00023
+1759    06     0.00023
+1759    07     0.00023
+1759    08     0.00023
+1759    09     0.00023
+1759    10     0.00023
+1759    11     0.00023
+1759    12     0.00023
+1760    01     0.00023
+1760    02     0.00023
+1760    03     0.00023
+1760    04     0.00023
+1760    05     0.00023
+1760    06     0.00023
+1760    07     0.00023
+1760    08     0.00023
+1760    09     0.00023
+1760    10     0.00023
+1760    11     0.00023
+1760    12     0.00023
+1761    01     0.00025
+1761    02     0.00025
+1761    03     0.00025
+1761    04     0.00025
+1761    05     0.00025
+1761    06     0.00025
+1761    07     0.00025
+1761    08     0.00025
+1761    09     0.00025
+1761    10     0.00025
+1761    11     0.00025
+1761    12     0.00025
+1762    01     0.00025
+1762    02     0.00025
+1762    03     0.00025
+1762    04     0.00025
+1762    05     0.00025
+1762    06     0.00025
+1762    07     0.00025
+1762    08     0.00025
+1762    09     0.00025
+1762    10     0.00025
+1762    11     0.00025
+1762    12     0.00025
+1763    01     0.00025
+1763    02     0.00025
+1763    03     0.00025
+1763    04     0.00025
+1763    05     0.00025
+1763    06     0.00025
+1763    07     0.00025
+1763    08     0.00025
+1763    09     0.00025
+1763    10     0.00025
+1763    11     0.00025
+1763    12     0.00025
+1764    01     0.00025
+1764    02     0.00025
+1764    03     0.00025
+1764    04     0.00025
+1764    05     0.00025
+1764    06     0.00025
+1764    07     0.00025
+1764    08     0.00025
+1764    09     0.00025
+1764    10     0.00025
+1764    11     0.00025
+1764    12     0.00025
+1765    01     0.00025
+1765    02     0.00025
+1765    03     0.00025
+1765    04     0.00025
+1765    05     0.00025
+1765    06     0.00025
+1765    07     0.00025
+1765    08     0.00025
+1765    09     0.00025
+1765    10     0.00025
+1765    11     0.00025
+1765    12     0.00025
+1766    01     0.00028
+1766    02     0.00028
+1766    03     0.00028
+1766    04     0.00028
+1766    05     0.00028
+1766    06     0.00028
+1766    07     0.00028
+1766    08     0.00028
+1766    09     0.00028
+1766    10     0.00028
+1766    11     0.00028
+1766    12     0.00028
+1767    01     0.00028
+1767    02     0.00028
+1767    03     0.00028
+1767    04     0.00028
+1767    05     0.00028
+1767    06     0.00028
+1767    07     0.00028
+1767    08     0.00028
+1767    09     0.00028
+1767    10     0.00028
+1767    11     0.00028
+1767    12     0.00028
+1768    01     0.00028
+1768    02     0.00028
+1768    03     0.00028
+1768    04     0.00028
+1768    05     0.00028
+1768    06     0.00028
+1768    07     0.00028
+1768    08     0.00028
+1768    09     0.00028
+1768    10     0.00028
+1768    11     0.00028
+1768    12     0.00028
+1769    01     0.00028
+1769    02     0.00028
+1769    03     0.00028
+1769    04     0.00028
+1769    05     0.00028
+1769    06     0.00028
+1769    07     0.00028
+1769    08     0.00028
+1769    09     0.00028
+1769    10     0.00028
+1769    11     0.00028
+1769    12     0.00028
+1770    01     0.00028
+1770    02     0.00028
+1770    03     0.00028
+1770    04     0.00028
+1770    05     0.00028
+1770    06     0.00028
+1770    07     0.00028
+1770    08     0.00028
+1770    09     0.00028
+1770    10     0.00028
+1770    11     0.00028
+1770    12     0.00028
+1771    01     0.00031
+1771    02     0.00031
+1771    03     0.00031
+1771    04     0.00031
+1771    05     0.00031
+1771    06     0.00031
+1771    07     0.00031
+1771    08     0.00031
+1771    09     0.00031
+1771    10     0.00031
+1771    11     0.00031
+1771    12     0.00031
+1772    01     0.00031
+1772    02     0.00031
+1772    03     0.00031
+1772    04     0.00031
+1772    05     0.00031
+1772    06     0.00031
+1772    07     0.00031
+1772    08     0.00031
+1772    09     0.00031
+1772    10     0.00031
+1772    11     0.00031
+1772    12     0.00031
+1773    01     0.00031
+1773    02     0.00031
+1773    03     0.00031
+1773    04     0.00031
+1773    05     0.00031
+1773    06     0.00031
+1773    07     0.00031
+1773    08     0.00031
+1773    09     0.00031
+1773    10     0.00031
+1773    11     0.00031
+1773    12     0.00031
+1774    01     0.00031
+1774    02     0.00031
+1774    03     0.00031
+1774    04     0.00031
+1774    05     0.00031
+1774    06     0.00031
+1774    07     0.00031
+1774    08     0.00031
+1774    09     0.00031
+1774    10     0.00031
+1774    11     0.00031
+1774    12     0.00031
+1775    01     0.00031
+1775    02     0.00031
+1775    03     0.00031
+1775    04     0.00031
+1775    05     0.00031
+1775    06     0.00031
+1775    07     0.00031
+1775    08     0.00031
+1775    09     0.00031
+1775    10     0.00031
+1775    11     0.00031
+1775    12     0.00031
+1776    01     0.00034
+1776    02     0.00034
+1776    03     0.00034
+1776    04     0.00034
+1776    05     0.00034
+1776    06     0.00034
+1776    07     0.00034
+1776    08     0.00034
+1776    09     0.00034
+1776    10     0.00034
+1776    11     0.00034
+1776    12     0.00034
+1777    01     0.00034
+1777    02     0.00034
+1777    03     0.00034
+1777    04     0.00034
+1777    05     0.00034
+1777    06     0.00034
+1777    07     0.00034
+1777    08     0.00034
+1777    09     0.00034
+1777    10     0.00034
+1777    11     0.00034
+1777    12     0.00034
+1778    01     0.00034
+1778    02     0.00034
+1778    03     0.00034
+1778    04     0.00034
+1778    05     0.00034
+1778    06     0.00034
+1778    07     0.00034
+1778    08     0.00034
+1778    09     0.00034
+1778    10     0.00034
+1778    11     0.00034
+1778    12     0.00034
+1779    01     0.00034
+1779    02     0.00034
+1779    03     0.00034
+1779    04     0.00034
+1779    05     0.00034
+1779    06     0.00034
+1779    07     0.00034
+1779    08     0.00034
+1779    09     0.00034
+1779    10     0.00034
+1779    11     0.00034
+1779    12     0.00034
+1780    01     0.00034
+1780    02     0.00034
+1780    03     0.00034
+1780    04     0.00034
+1780    05     0.00034
+1780    06     0.00034
+1780    07     0.00034
+1780    08     0.00034
+1780    09     0.00034
+1780    10     0.00034
+1780    11     0.00034
+1780    12     0.00034
+1781    01     0.00038
+1781    02     0.00038
+1781    03     0.00038
+1781    04     0.00038
+1781    05     0.00038
+1781    06     0.00038
+1781    07     0.00038
+1781    08     0.00038
+1781    09     0.00038
+1781    10     0.00038
+1781    11     0.00038
+1781    12     0.00038
+1782    01     0.00038
+1782    02     0.00038
+1782    03     0.00038
+1782    04     0.00038
+1782    05     0.00038
+1782    06     0.00038
+1782    07     0.00038
+1782    08     0.00038
+1782    09     0.00038
+1782    10     0.00038
+1782    11     0.00038
+1782    12     0.00038
+1783    01     0.00038
+1783    02     0.00038
+1783    03     0.00038
+1783    04     0.00038
+1783    05     0.00038
+1783    06     0.00038
+1783    07     0.00038
+1783    08     0.00038
+1783    09     0.00038
+1783    10     0.00038
+1783    11     0.00038
+1783    12     0.00038
+1784    01     0.00038
+1784    02     0.00038
+1784    03     0.00038
+1784    04     0.00038
+1784    05     0.00038
+1784    06     0.00038
+1784    07     0.00038
+1784    08     0.00038
+1784    09     0.00038
+1784    10     0.00038
+1784    11     0.00038
+1784    12     0.00038
+1785    01     0.00038
+1785    02     0.00038
+1785    03     0.00038
+1785    04     0.00038
+1785    05     0.00038
+1785    06     0.00038
+1785    07     0.00038
+1785    08     0.00038
+1785    09     0.00038
+1785    10     0.00038
+1785    11     0.00038
+1785    12     0.00038
+1786    01     0.00044
+1786    02     0.00044
+1786    03     0.00044
+1786    04     0.00044
+1786    05     0.00044
+1786    06     0.00044
+1786    07     0.00044
+1786    08     0.00044
+1786    09     0.00044
+1786    10     0.00044
+1786    11     0.00044
+1786    12     0.00044
+1787    01     0.00044
+1787    02     0.00044
+1787    03     0.00044
+1787    04     0.00044
+1787    05     0.00044
+1787    06     0.00044
+1787    07     0.00044
+1787    08     0.00044
+1787    09     0.00044
+1787    10     0.00044
+1787    11     0.00044
+1787    12     0.00044
+1788    01     0.00044
+1788    02     0.00044
+1788    03     0.00044
+1788    04     0.00044
+1788    05     0.00044
+1788    06     0.00044
+1788    07     0.00044
+1788    08     0.00044
+1788    09     0.00044
+1788    10     0.00044
+1788    11     0.00044
+1788    12     0.00044
+1789    01     0.00044
+1789    02     0.00044
+1789    03     0.00044
+1789    04     0.00044
+1789    05     0.00044
+1789    06     0.00044
+1789    07     0.00044
+1789    08     0.00044
+1789    09     0.00044
+1789    10     0.00044
+1789    11     0.00044
+1789    12     0.00044
+1790    01     0.00044
+1790    02     0.00044
+1790    03     0.00044
+1790    04     0.00044
+1790    05     0.00044
+1790    06     0.00044
+1790    07     0.00044
+1790    08     0.00044
+1790    09     0.00044
+1790    10     0.00044
+1790    11     0.00044
+1790    12     0.00044
+1791    01     0.00049
+1791    02     0.00049
+1791    03     0.00049
+1791    04     0.00049
+1791    05     0.00049
+1791    06     0.00049
+1791    07     0.00049
+1791    08     0.00049
+1791    09     0.00049
+1791    10     0.00049
+1791    11     0.00049
+1791    12     0.00049
+1792    01     0.00050
+1792    02     0.00050
+1792    03     0.00050
+1792    04     0.00050
+1792    05     0.00050
+1792    06     0.00050
+1792    07     0.00050
+1792    08     0.00050
+1792    09     0.00050
+1792    10     0.00050
+1792    11     0.00050
+1792    12     0.00050
+1793    01     0.00050
+1793    02     0.00050
+1793    03     0.00050
+1793    04     0.00050
+1793    05     0.00050
+1793    06     0.00050
+1793    07     0.00050
+1793    08     0.00050
+1793    09     0.00050
+1793    10     0.00050
+1793    11     0.00050
+1793    12     0.00050
+1794    01     0.00050
+1794    02     0.00050
+1794    03     0.00050
+1794    04     0.00050
+1794    05     0.00050
+1794    06     0.00050
+1794    07     0.00050
+1794    08     0.00050
+1794    09     0.00050
+1794    10     0.00050
+1794    11     0.00050
+1794    12     0.00050
+1795    01     0.00050
+1795    02     0.00050
+1795    03     0.00050
+1795    04     0.00050
+1795    05     0.00050
+1795    06     0.00050
+1795    07     0.00050
+1795    08     0.00050
+1795    09     0.00050
+1795    10     0.00050
+1795    11     0.00050
+1795    12     0.00050
+1796    01     0.00052
+1796    02     0.00052
+1796    03     0.00052
+1796    04     0.00052
+1796    05     0.00052
+1796    06     0.00052
+1796    07     0.00052
+1796    08     0.00052
+1796    09     0.00052
+1796    10     0.00052
+1796    11     0.00052
+1796    12     0.00052
+1797    01     0.00055
+1797    02     0.00055
+1797    03     0.00055
+1797    04     0.00055
+1797    05     0.00055
+1797    06     0.00055
+1797    07     0.00055
+1797    08     0.00055
+1797    09     0.00055
+1797    10     0.00055
+1797    11     0.00055
+1797    12     0.00055
+1798    01     0.00057
+1798    02     0.00057
+1798    03     0.00057
+1798    04     0.00057
+1798    05     0.00057
+1798    06     0.00057
+1798    07     0.00057
+1798    08     0.00057
+1798    09     0.00057
+1798    10     0.00057
+1798    11     0.00057
+1798    12     0.00057
+1799    01     0.00060
+1799    02     0.00060
+1799    03     0.00060
+1799    04     0.00060
+1799    05     0.00060
+1799    06     0.00060
+1799    07     0.00060
+1799    08     0.00060
+1799    09     0.00060
+1799    10     0.00060
+1799    11     0.00060
+1799    12     0.00060
+1800    01     0.00064
+1800    02     0.00064
+1800    03     0.00064
+1800    04     0.00064
+1800    05     0.00064
+1800    06     0.00064
+1800    07     0.00064
+1800    08     0.00064
+1800    09     0.00064
+1800    10     0.00064
+1800    11     0.00064
+1800    12     0.00064
+1801    01     0.00064
+1801    02     0.00064
+1801    03     0.00064
+1801    04     0.00064
+1801    05     0.00064
+1801    06     0.00064
+1801    07     0.00064
+1801    08     0.00064
+1801    09     0.00064
+1801    10     0.00064
+1801    11     0.00064
+1801    12     0.00064
+1802    01     0.00084
+1802    02     0.00084
+1802    03     0.00084
+1802    04     0.00084
+1802    05     0.00084
+1802    06     0.00084
+1802    07     0.00084
+1802    08     0.00084
+1802    09     0.00084
+1802    10     0.00084
+1802    11     0.00084
+1802    12     0.00084
+1803    01     0.00072
+1803    02     0.00072
+1803    03     0.00072
+1803    04     0.00072
+1803    05     0.00072
+1803    06     0.00072
+1803    07     0.00072
+1803    08     0.00072
+1803    09     0.00072
+1803    10     0.00072
+1803    11     0.00072
+1803    12     0.00072
+1804    01     0.00078
+1804    02     0.00078
+1804    03     0.00078
+1804    04     0.00078
+1804    05     0.00078
+1804    06     0.00078
+1804    07     0.00078
+1804    08     0.00078
+1804    09     0.00078
+1804    10     0.00078
+1804    11     0.00078
+1804    12     0.00078
+1805    01     0.00076
+1805    02     0.00076
+1805    03     0.00076
+1805    04     0.00076
+1805    05     0.00076
+1805    06     0.00076
+1805    07     0.00076
+1805    08     0.00076
+1805    09     0.00076
+1805    10     0.00076
+1805    11     0.00076
+1805    12     0.00076
+1806    01     0.00080
+1806    02     0.00080
+1806    03     0.00080
+1806    04     0.00080
+1806    05     0.00080
+1806    06     0.00080
+1806    07     0.00080
+1806    08     0.00080
+1806    09     0.00080
+1806    10     0.00080
+1806    11     0.00080
+1806    12     0.00080
+1807    01     0.00084
+1807    02     0.00084
+1807    03     0.00084
+1807    04     0.00084
+1807    05     0.00084
+1807    06     0.00084
+1807    07     0.00084
+1807    08     0.00084
+1807    09     0.00084
+1807    10     0.00084
+1807    11     0.00084
+1807    12     0.00084
+1808    01     0.00080
+1808    02     0.00080
+1808    03     0.00080
+1808    04     0.00080
+1808    05     0.00080
+1808    06     0.00080
+1808    07     0.00080
+1808    08     0.00080
+1808    09     0.00080
+1808    10     0.00080
+1808    11     0.00080
+1808    12     0.00080
+1809    01     0.00080
+1809    02     0.00080
+1809    03     0.00080
+1809    04     0.00080
+1809    05     0.00080
+1809    06     0.00080
+1809    07     0.00080
+1809    08     0.00080
+1809    09     0.00080
+1809    10     0.00080
+1809    11     0.00080
+1809    12     0.00080
+1810    01     0.00085
+1810    02     0.00085
+1810    03     0.00085
+1810    04     0.00085
+1810    05     0.00085
+1810    06     0.00085
+1810    07     0.00085
+1810    08     0.00085
+1810    09     0.00085
+1810    10     0.00085
+1810    11     0.00085
+1810    12     0.00085
+1811    01     0.00090
+1811    02     0.00090
+1811    03     0.00090
+1811    04     0.00090
+1811    05     0.00090
+1811    06     0.00090
+1811    07     0.00090
+1811    08     0.00090
+1811    09     0.00090
+1811    10     0.00090
+1811    11     0.00090
+1811    12     0.00090
+1812    01     0.00093
+1812    02     0.00093
+1812    03     0.00093
+1812    04     0.00093
+1812    05     0.00093
+1812    06     0.00093
+1812    07     0.00093
+1812    08     0.00093
+1812    09     0.00093
+1812    10     0.00093
+1812    11     0.00093
+1812    12     0.00093
+1813    01     0.00094
+1813    02     0.00094
+1813    03     0.00094
+1813    04     0.00094
+1813    05     0.00094
+1813    06     0.00094
+1813    07     0.00094
+1813    08     0.00094
+1813    09     0.00094
+1813    10     0.00094
+1813    11     0.00094
+1813    12     0.00094
+1814    01     0.00096
+1814    02     0.00096
+1814    03     0.00096
+1814    04     0.00096
+1814    05     0.00096
+1814    06     0.00096
+1814    07     0.00096
+1814    08     0.00096
+1814    09     0.00096
+1814    10     0.00096
+1814    11     0.00096
+1814    12     0.00096
+1815    01     0.00099
+1815    02     0.00099
+1815    03     0.00099
+1815    04     0.00099
+1815    05     0.00099
+1815    06     0.00099
+1815    07     0.00099
+1815    08     0.00099
+1815    09     0.00099
+1815    10     0.00099
+1815    11     0.00099
+1815    12     0.00099
+1816    01     0.00108
+1816    02     0.00108
+1816    03     0.00108
+1816    04     0.00108
+1816    05     0.00108
+1816    06     0.00108
+1816    07     0.00108
+1816    08     0.00108
+1816    09     0.00108
+1816    10     0.00108
+1816    11     0.00108
+1816    12     0.00108
+1817    01     0.00112
+1817    02     0.00112
+1817    03     0.00112
+1817    04     0.00112
+1817    05     0.00112
+1817    06     0.00112
+1817    07     0.00112
+1817    08     0.00112
+1817    09     0.00112
+1817    10     0.00112
+1817    11     0.00112
+1817    12     0.00112
+1818    01     0.00113
+1818    02     0.00113
+1818    03     0.00113
+1818    04     0.00113
+1818    05     0.00113
+1818    06     0.00113
+1818    07     0.00113
+1818    08     0.00113
+1818    09     0.00113
+1818    10     0.00113
+1818    11     0.00113
+1818    12     0.00113
+1819    01     0.00114
+1819    02     0.00114
+1819    03     0.00114
+1819    04     0.00114
+1819    05     0.00114
+1819    06     0.00114
+1819    07     0.00114
+1819    08     0.00114
+1819    09     0.00114
+1819    10     0.00114
+1819    11     0.00114
+1819    12     0.00114
+1820    01     0.00115
+1820    02     0.00115
+1820    03     0.00115
+1820    04     0.00115
+1820    05     0.00115
+1820    06     0.00115
+1820    07     0.00115
+1820    08     0.00115
+1820    09     0.00115
+1820    10     0.00115
+1820    11     0.00115
+1820    12     0.00115
+1821    01     0.00117
+1821    02     0.00117
+1821    03     0.00117
+1821    04     0.00117
+1821    05     0.00117
+1821    06     0.00117
+1821    07     0.00117
+1821    08     0.00117
+1821    09     0.00117
+1821    10     0.00117
+1821    11     0.00117
+1821    12     0.00117
+1822    01     0.00122
+1822    02     0.00122
+1822    03     0.00122
+1822    04     0.00122
+1822    05     0.00122
+1822    06     0.00122
+1822    07     0.00122
+1822    08     0.00122
+1822    09     0.00122
+1822    10     0.00122
+1822    11     0.00122
+1822    12     0.00122
+1823    01     0.00129
+1823    02     0.00129
+1823    03     0.00129
+1823    04     0.00129
+1823    05     0.00129
+1823    06     0.00129
+1823    07     0.00129
+1823    08     0.00129
+1823    09     0.00129
+1823    10     0.00129
+1823    11     0.00129
+1823    12     0.00129
+1824    01     0.00133
+1824    02     0.00133
+1824    03     0.00133
+1824    04     0.00133
+1824    05     0.00133
+1824    06     0.00133
+1824    07     0.00133
+1824    08     0.00133
+1824    09     0.00133
+1824    10     0.00133
+1824    11     0.00133
+1824    12     0.00133
+1825    01     0.00138
+1825    02     0.00138
+1825    03     0.00138
+1825    04     0.00138
+1825    05     0.00138
+1825    06     0.00138
+1825    07     0.00138
+1825    08     0.00138
+1825    09     0.00138
+1825    10     0.00138
+1825    11     0.00138
+1825    12     0.00138
+1826    01     0.00140
+1826    02     0.00140
+1826    03     0.00140
+1826    04     0.00140
+1826    05     0.00140
+1826    06     0.00140
+1826    07     0.00140
+1826    08     0.00140
+1826    09     0.00140
+1826    10     0.00140
+1826    11     0.00140
+1826    12     0.00140
+1827    01     0.00150
+1827    02     0.00150
+1827    03     0.00150
+1827    04     0.00150
+1827    05     0.00150
+1827    06     0.00150
+1827    07     0.00150
+1827    08     0.00150
+1827    09     0.00150
+1827    10     0.00150
+1827    11     0.00150
+1827    12     0.00150
+1828    01     0.00152
+1828    02     0.00152
+1828    03     0.00152
+1828    04     0.00152
+1828    05     0.00152
+1828    06     0.00152
+1828    07     0.00152
+1828    08     0.00152
+1828    09     0.00152
+1828    10     0.00152
+1828    11     0.00152
+1828    12     0.00152
+1829    01     0.00151
+1829    02     0.00151
+1829    03     0.00151
+1829    04     0.00151
+1829    05     0.00151
+1829    06     0.00151
+1829    07     0.00151
+1829    08     0.00151
+1829    09     0.00151
+1829    10     0.00151
+1829    11     0.00151
+1829    12     0.00151
+1830    01     0.00203
+1830    02     0.00203
+1830    03     0.00203
+1830    04     0.00203
+1830    05     0.00203
+1830    06     0.00203
+1830    07     0.00203
+1830    08     0.00203
+1830    09     0.00203
+1830    10     0.00203
+1830    11     0.00203
+1830    12     0.00203
+1831    01     0.00192
+1831    02     0.00192
+1831    03     0.00192
+1831    04     0.00192
+1831    05     0.00192
+1831    06     0.00192
+1831    07     0.00192
+1831    08     0.00192
+1831    09     0.00192
+1831    10     0.00192
+1831    11     0.00192
+1831    12     0.00192
+1832    01     0.00194
+1832    02     0.00194
+1832    03     0.00194
+1832    04     0.00194
+1832    05     0.00194
+1832    06     0.00194
+1832    07     0.00194
+1832    08     0.00194
+1832    09     0.00194
+1832    10     0.00194
+1832    11     0.00194
+1832    12     0.00194
+1833    01     0.00197
+1833    02     0.00197
+1833    03     0.00197
+1833    04     0.00197
+1833    05     0.00197
+1833    06     0.00197
+1833    07     0.00197
+1833    08     0.00197
+1833    09     0.00197
+1833    10     0.00197
+1833    11     0.00197
+1833    12     0.00197
+1834    01     0.00201
+1834    02     0.00201
+1834    03     0.00201
+1834    04     0.00201
+1834    05     0.00201
+1834    06     0.00201
+1834    07     0.00201
+1834    08     0.00201
+1834    09     0.00201
+1834    10     0.00201
+1834    11     0.00201
+1834    12     0.00201
+1835    01     0.00206
+1835    02     0.00206
+1835    03     0.00206
+1835    04     0.00206
+1835    05     0.00206
+1835    06     0.00206
+1835    07     0.00206
+1835    08     0.00206
+1835    09     0.00206
+1835    10     0.00206
+1835    11     0.00206
+1835    12     0.00206
+1836    01     0.00238
+1836    02     0.00238
+1836    03     0.00238
+1836    04     0.00238
+1836    05     0.00238
+1836    06     0.00238
+1836    07     0.00238
+1836    08     0.00238
+1836    09     0.00238
+1836    10     0.00238
+1836    11     0.00238
+1836    12     0.00238
+1837    01     0.00238
+1837    02     0.00238
+1837    03     0.00238
+1837    04     0.00238
+1837    05     0.00238
+1837    06     0.00238
+1837    07     0.00238
+1837    08     0.00238
+1837    09     0.00238
+1837    10     0.00238
+1837    11     0.00238
+1837    12     0.00238
+1838    01     0.00246
+1838    02     0.00246
+1838    03     0.00246
+1838    04     0.00246
+1838    05     0.00246
+1838    06     0.00246
+1838    07     0.00246
+1838    08     0.00246
+1838    09     0.00246
+1838    10     0.00246
+1838    11     0.00246
+1838    12     0.00246
+1839    01     0.00254
+1839    02     0.00254
+1839    03     0.00254
+1839    04     0.00254
+1839    05     0.00254
+1839    06     0.00254
+1839    07     0.00254
+1839    08     0.00254
+1839    09     0.00254
+1839    10     0.00254
+1839    11     0.00254
+1839    12     0.00254
+1840    01     0.00271
+1840    02     0.00271
+1840    03     0.00271
+1840    04     0.00271
+1840    05     0.00271
+1840    06     0.00271
+1840    07     0.00271
+1840    08     0.00271
+1840    09     0.00271
+1840    10     0.00271
+1840    11     0.00271
+1840    12     0.00271
+1841    01     0.00279
+1841    02     0.00279
+1841    03     0.00279
+1841    04     0.00279
+1841    05     0.00279
+1841    06     0.00279
+1841    07     0.00279
+1841    08     0.00279
+1841    09     0.00279
+1841    10     0.00279
+1841    11     0.00279
+1841    12     0.00279
+1842    01     0.00295
+1842    02     0.00295
+1842    03     0.00295
+1842    04     0.00295
+1842    05     0.00295
+1842    06     0.00295
+1842    07     0.00295
+1842    08     0.00295
+1842    09     0.00295
+1842    10     0.00295
+1842    11     0.00295
+1842    12     0.00295
+1843    01     0.00302
+1843    02     0.00302
+1843    03     0.00302
+1843    04     0.00302
+1843    05     0.00302
+1843    06     0.00302
+1843    07     0.00302
+1843    08     0.00302
+1843    09     0.00302
+1843    10     0.00302
+1843    11     0.00302
+1843    12     0.00302
+1844    01     0.00322
+1844    02     0.00322
+1844    03     0.00322
+1844    04     0.00322
+1844    05     0.00322
+1844    06     0.00322
+1844    07     0.00322
+1844    08     0.00322
+1844    09     0.00322
+1844    10     0.00322
+1844    11     0.00322
+1844    12     0.00322
+1845    01     0.00353
+1845    02     0.00353
+1845    03     0.00353
+1845    04     0.00353
+1845    05     0.00353
+1845    06     0.00353
+1845    07     0.00353
+1845    08     0.00353
+1845    09     0.00353
+1845    10     0.00353
+1845    11     0.00353
+1845    12     0.00353
+1846    01     0.00359
+1846    02     0.00359
+1846    03     0.00359
+1846    04     0.00359
+1846    05     0.00359
+1846    06     0.00359
+1846    07     0.00359
+1846    08     0.00359
+1846    09     0.00359
+1846    10     0.00359
+1846    11     0.00359
+1846    12     0.00359
+1847    01     0.00392
+1847    02     0.00392
+1847    03     0.00392
+1847    04     0.00392
+1847    05     0.00392
+1847    06     0.00392
+1847    07     0.00392
+1847    08     0.00392
+1847    09     0.00392
+1847    10     0.00392
+1847    11     0.00392
+1847    12     0.00392
+1848    01     0.00395
+1848    02     0.00395
+1848    03     0.00395
+1848    04     0.00395
+1848    05     0.00395
+1848    06     0.00395
+1848    07     0.00395
+1848    08     0.00395
+1848    09     0.00395
+1848    10     0.00395
+1848    11     0.00395
+1848    12     0.00395
+1849    01     0.00417
+1849    02     0.00417
+1849    03     0.00417
+1849    04     0.00417
+1849    05     0.00417
+1849    06     0.00417
+1849    07     0.00417
+1849    08     0.00417
+1849    09     0.00417
+1849    10     0.00417
+1849    11     0.00417
+1849    12     0.00417
+1850    01     0.00448
+1850    02     0.00448
+1850    03     0.00448
+1850    04     0.00448
+1850    05     0.00448
+1850    06     0.00448
+1850    07     0.00448
+1850    08     0.00448
+1850    09     0.00448
+1850    10     0.00448
+1850    11     0.00448
+1850    12     0.00448
+1851    01     0.00452
+1851    02     0.00452
+1851    03     0.00452
+1851    04     0.00452
+1851    05     0.00452
+1851    06     0.00452
+1851    07     0.00452
+1851    08     0.00452
+1851    09     0.00452
+1851    10     0.00452
+1851    11     0.00452
+1851    12     0.00452
+1852    01     0.00472
+1852    02     0.00472
+1852    03     0.00472
+1852    04     0.00472
+1852    05     0.00472
+1852    06     0.00472
+1852    07     0.00472
+1852    08     0.00472
+1852    09     0.00472
+1852    10     0.00472
+1852    11     0.00472
+1852    12     0.00472
+1853    01     0.00494
+1853    02     0.00494
+1853    03     0.00494
+1853    04     0.00494
+1853    05     0.00494
+1853    06     0.00494
+1853    07     0.00494
+1853    08     0.00494
+1853    09     0.00494
+1853    10     0.00494
+1853    11     0.00494
+1853    12     0.00494
+1854    01     0.00580
+1854    02     0.00580
+1854    03     0.00580
+1854    04     0.00580
+1854    05     0.00580
+1854    06     0.00580
+1854    07     0.00580
+1854    08     0.00580
+1854    09     0.00580
+1854    10     0.00580
+1854    11     0.00580
+1854    12     0.00580
+1855    01     0.00592
+1855    02     0.00592
+1855    03     0.00592
+1855    04     0.00592
+1855    05     0.00592
+1855    06     0.00592
+1855    07     0.00592
+1855    08     0.00592
+1855    09     0.00592
+1855    10     0.00592
+1855    11     0.00592
+1855    12     0.00592
+1856    01     0.00631
+1856    02     0.00631
+1856    03     0.00631
+1856    04     0.00631
+1856    05     0.00631
+1856    06     0.00631
+1856    07     0.00631
+1856    08     0.00631
+1856    09     0.00631
+1856    10     0.00631
+1856    11     0.00631
+1856    12     0.00631
+1857    01     0.00637
+1857    02     0.00637
+1857    03     0.00637
+1857    04     0.00637
+1857    05     0.00637
+1857    06     0.00637
+1857    07     0.00637
+1857    08     0.00637
+1857    09     0.00637
+1857    10     0.00637
+1857    11     0.00637
+1857    12     0.00637
+1858    01     0.00646
+1858    02     0.00646
+1858    03     0.00646
+1858    04     0.00646
+1858    05     0.00646
+1858    06     0.00646
+1858    07     0.00646
+1858    08     0.00646
+1858    09     0.00646
+1858    10     0.00646
+1858    11     0.00646
+1858    12     0.00646
+1859    01     0.00685
+1859    02     0.00685
+1859    03     0.00685
+1859    04     0.00685
+1859    05     0.00685
+1859    06     0.00685
+1859    07     0.00685
+1859    08     0.00685
+1859    09     0.00685
+1859    10     0.00685
+1859    11     0.00685
+1859    12     0.00685
+1860    01     0.00752
+1860    02     0.00752
+1860    03     0.00752
+1860    04     0.00752
+1860    05     0.00752
+1860    06     0.00752
+1860    07     0.00752
+1860    08     0.00752
+1860    09     0.00752
+1860    10     0.00752
+1860    11     0.00752
+1860    12     0.00752
+1861    01     0.00791
+1861    02     0.00791
+1861    03     0.00791
+1861    04     0.00791
+1861    05     0.00791
+1861    06     0.00791
+1861    07     0.00791
+1861    08     0.00791
+1861    09     0.00791
+1861    10     0.00791
+1861    11     0.00791
+1861    12     0.00791
+1862    01     0.00805
+1862    02     0.00805
+1862    03     0.00805
+1862    04     0.00805
+1862    05     0.00805
+1862    06     0.00805
+1862    07     0.00805
+1862    08     0.00805
+1862    09     0.00805
+1862    10     0.00805
+1862    11     0.00805
+1862    12     0.00805
+1863    01     0.00860
+1863    02     0.00860
+1863    03     0.00860
+1863    04     0.00860
+1863    05     0.00860
+1863    06     0.00860
+1863    07     0.00860
+1863    08     0.00860
+1863    09     0.00860
+1863    10     0.00860
+1863    11     0.00860
+1863    12     0.00860
+1864    01     0.00926
+1864    02     0.00926
+1864    03     0.00926
+1864    04     0.00926
+1864    05     0.00926
+1864    06     0.00926
+1864    07     0.00926
+1864    08     0.00926
+1864    09     0.00926
+1864    10     0.00926
+1864    11     0.00926
+1864    12     0.00926
+1865    01     0.00983
+1865    02     0.00983
+1865    03     0.00983
+1865    04     0.00983
+1865    05     0.00983
+1865    06     0.00983
+1865    07     0.00983
+1865    08     0.00983
+1865    09     0.00983
+1865    10     0.00983
+1865    11     0.00983
+1865    12     0.00983
+1866    01     0.01014
+1866    02     0.01014
+1866    03     0.01014
+1866    04     0.01014
+1866    05     0.01014
+1866    06     0.01014
+1866    07     0.01014
+1866    08     0.01014
+1866    09     0.01014
+1866    10     0.01014
+1866    11     0.01014
+1866    12     0.01014
+1867    01     0.01087
+1867    02     0.01087
+1867    03     0.01087
+1867    04     0.01087
+1867    05     0.01087
+1867    06     0.01087
+1867    07     0.01087
+1867    08     0.01087
+1867    09     0.01087
+1867    10     0.01087
+1867    11     0.01087
+1867    12     0.01087
+1868    01     0.01116
+1868    02     0.01116
+1868    03     0.01116
+1868    04     0.01116
+1868    05     0.01116
+1868    06     0.01116
+1868    07     0.01116
+1868    08     0.01116
+1868    09     0.01116
+1868    10     0.01116
+1868    11     0.01116
+1868    12     0.01116
+1869    01     0.01185
+1869    02     0.01185
+1869    03     0.01185
+1869    04     0.01185
+1869    05     0.01185
+1869    06     0.01185
+1869    07     0.01185
+1869    08     0.01185
+1869    09     0.01185
+1869    10     0.01185
+1869    11     0.01185
+1869    12     0.01185
+1870    01     0.01211
+1870    02     0.01211
+1870    03     0.01211
+1870    04     0.01211
+1870    05     0.01211
+1870    06     0.01211
+1870    07     0.01211
+1870    08     0.01211
+1870    09     0.01211
+1870    10     0.01211
+1870    11     0.01211
+1870    12     0.01211
+1871    01     0.01288
+1871    02     0.01288
+1871    03     0.01288
+1871    04     0.01288
+1871    05     0.01288
+1871    06     0.01288
+1871    07     0.01288
+1871    08     0.01288
+1871    09     0.01288
+1871    10     0.01288
+1871    11     0.01288
+1871    12     0.01288
+1872    01     0.01425
+1872    02     0.01425
+1872    03     0.01425
+1872    04     0.01425
+1872    05     0.01425
+1872    06     0.01425
+1872    07     0.01425
+1872    08     0.01425
+1872    09     0.01425
+1872    10     0.01425
+1872    11     0.01425
+1872    12     0.01425
+1873    01     0.01513
+1873    02     0.01513
+1873    03     0.01513
+1873    04     0.01513
+1873    05     0.01513
+1873    06     0.01513
+1873    07     0.01513
+1873    08     0.01513
+1873    09     0.01513
+1873    10     0.01513
+1873    11     0.01513
+1873    12     0.01513
+1874    01     0.01417
+1874    02     0.01417
+1874    03     0.01417
+1874    04     0.01417
+1874    05     0.01417
+1874    06     0.01417
+1874    07     0.01417
+1874    08     0.01417
+1874    09     0.01417
+1874    10     0.01417
+1874    11     0.01417
+1874    12     0.01417
+1875    01     0.01537
+1875    02     0.01537
+1875    03     0.01537
+1875    04     0.01537
+1875    05     0.01537
+1875    06     0.01537
+1875    07     0.01537
+1875    08     0.01537
+1875    09     0.01537
+1875    10     0.01537
+1875    11     0.01537
+1875    12     0.01537
+1876    01     0.01559
+1876    02     0.01559
+1876    03     0.01559
+1876    04     0.01559
+1876    05     0.01559
+1876    06     0.01559
+1876    07     0.01559
+1876    08     0.01559
+1876    09     0.01559
+1876    10     0.01559
+1876    11     0.01559
+1876    12     0.01559
+1877    01     0.01590
+1877    02     0.01590
+1877    03     0.01590
+1877    04     0.01590
+1877    05     0.01590
+1877    06     0.01590
+1877    07     0.01590
+1877    08     0.01590
+1877    09     0.01590
+1877    10     0.01590
+1877    11     0.01590
+1877    12     0.01590
+1878    01     0.01602
+1878    02     0.01602
+1878    03     0.01602
+1878    04     0.01602
+1878    05     0.01602
+1878    06     0.01602
+1878    07     0.01602
+1878    08     0.01602
+1878    09     0.01602
+1878    10     0.01602
+1878    11     0.01602
+1878    12     0.01602
+1879    01     0.01717
+1879    02     0.01717
+1879    03     0.01717
+1879    04     0.01717
+1879    05     0.01717
+1879    06     0.01717
+1879    07     0.01717
+1879    08     0.01717
+1879    09     0.01717
+1879    10     0.01717
+1879    11     0.01717
+1879    12     0.01717
+1880    01     0.01942
+1880    02     0.01942
+1880    03     0.01942
+1880    04     0.01942
+1880    05     0.01942
+1880    06     0.01942
+1880    07     0.01942
+1880    08     0.01942
+1880    09     0.01942
+1880    10     0.01942
+1880    11     0.01942
+1880    12     0.01942
+1881    01     0.02007
+1881    02     0.02007
+1881    03     0.02007
+1881    04     0.02007
+1881    05     0.02007
+1881    06     0.02007
+1881    07     0.02007
+1881    08     0.02007
+1881    09     0.02007
+1881    10     0.02007
+1881    11     0.02007
+1881    12     0.02007
+1882    01     0.02120
+1882    02     0.02120
+1882    03     0.02120
+1882    04     0.02120
+1882    05     0.02120
+1882    06     0.02120
+1882    07     0.02120
+1882    08     0.02120
+1882    09     0.02120
+1882    10     0.02120
+1882    11     0.02120
+1882    12     0.02120
+1883    01     0.02255
+1883    02     0.02255
+1883    03     0.02255
+1883    04     0.02255
+1883    05     0.02255
+1883    06     0.02255
+1883    07     0.02255
+1883    08     0.02255
+1883    09     0.02255
+1883    10     0.02255
+1883    11     0.02255
+1883    12     0.02255
+1884    01     0.02280
+1884    02     0.02280
+1884    03     0.02280
+1884    04     0.02280
+1884    05     0.02280
+1884    06     0.02280
+1884    07     0.02280
+1884    08     0.02280
+1884    09     0.02280
+1884    10     0.02280
+1884    11     0.02280
+1884    12     0.02280
+1885    01     0.02297
+1885    02     0.02297
+1885    03     0.02297
+1885    04     0.02297
+1885    05     0.02297
+1885    06     0.02297
+1885    07     0.02297
+1885    08     0.02297
+1885    09     0.02297
+1885    10     0.02297
+1885    11     0.02297
+1885    12     0.02297
+1886    01     0.02333
+1886    02     0.02333
+1886    03     0.02333
+1886    04     0.02333
+1886    05     0.02333
+1886    06     0.02333
+1886    07     0.02333
+1886    08     0.02333
+1886    09     0.02333
+1886    10     0.02333
+1886    11     0.02333
+1886    12     0.02333
+1887    01     0.02450
+1887    02     0.02450
+1887    03     0.02450
+1887    04     0.02450
+1887    05     0.02450
+1887    06     0.02450
+1887    07     0.02450
+1887    08     0.02450
+1887    09     0.02450
+1887    10     0.02450
+1887    11     0.02450
+1887    12     0.02450
+1888    01     0.02712
+1888    02     0.02712
+1888    03     0.02712
+1888    04     0.02712
+1888    05     0.02712
+1888    06     0.02712
+1888    07     0.02712
+1888    08     0.02712
+1888    09     0.02712
+1888    10     0.02712
+1888    11     0.02712
+1888    12     0.02712
+1889    01     0.02711
+1889    02     0.02711
+1889    03     0.02711
+1889    04     0.02711
+1889    05     0.02711
+1889    06     0.02711
+1889    07     0.02711
+1889    08     0.02711
+1889    09     0.02711
+1889    10     0.02711
+1889    11     0.02711
+1889    12     0.02711
+1890    01     0.02954
+1890    02     0.02954
+1890    03     0.02954
+1890    04     0.02954
+1890    05     0.02954
+1890    06     0.02954
+1890    07     0.02954
+1890    08     0.02954
+1890    09     0.02954
+1890    10     0.02954
+1890    11     0.02954
+1890    12     0.02954
+1891    01     0.03092
+1891    02     0.03092
+1891    03     0.03092
+1891    04     0.03092
+1891    05     0.03092
+1891    06     0.03092
+1891    07     0.03092
+1891    08     0.03092
+1891    09     0.03092
+1891    10     0.03092
+1891    11     0.03092
+1891    12     0.03092
+1892    01     0.03117
+1892    02     0.03117
+1892    03     0.03117
+1892    04     0.03117
+1892    05     0.03117
+1892    06     0.03117
+1892    07     0.03117
+1892    08     0.03117
+1892    09     0.03117
+1892    10     0.03117
+1892    11     0.03117
+1892    12     0.03117
+1893    01     0.03080
+1893    02     0.03080
+1893    03     0.03080
+1893    04     0.03080
+1893    05     0.03080
+1893    06     0.03080
+1893    07     0.03080
+1893    08     0.03080
+1893    09     0.03080
+1893    10     0.03080
+1893    11     0.03080
+1893    12     0.03080
+1894    01     0.03187
+1894    02     0.03187
+1894    03     0.03187
+1894    04     0.03187
+1894    05     0.03187
+1894    06     0.03187
+1894    07     0.03187
+1894    08     0.03187
+1894    09     0.03187
+1894    10     0.03187
+1894    11     0.03187
+1894    12     0.03187
+1895    01     0.03380
+1895    02     0.03380
+1895    03     0.03380
+1895    04     0.03380
+1895    05     0.03380
+1895    06     0.03380
+1895    07     0.03380
+1895    08     0.03380
+1895    09     0.03380
+1895    10     0.03380
+1895    11     0.03380
+1895    12     0.03380
+1896    01     0.03490
+1896    02     0.03490
+1896    03     0.03490
+1896    04     0.03490
+1896    05     0.03490
+1896    06     0.03490
+1896    07     0.03490
+1896    08     0.03490
+1896    09     0.03490
+1896    10     0.03490
+1896    11     0.03490
+1896    12     0.03490
+1897    01     0.03655
+1897    02     0.03655
+1897    03     0.03655
+1897    04     0.03655
+1897    05     0.03655
+1897    06     0.03655
+1897    07     0.03655
+1897    08     0.03655
+1897    09     0.03655
+1897    10     0.03655
+1897    11     0.03655
+1897    12     0.03655
+1898    01     0.03855
+1898    02     0.03855
+1898    03     0.03855
+1898    04     0.03855
+1898    05     0.03855
+1898    06     0.03855
+1898    07     0.03855
+1898    08     0.03855
+1898    09     0.03855
+1898    10     0.03855
+1898    11     0.03855
+1898    12     0.03855
+1899    01     0.04212
+1899    02     0.04212
+1899    03     0.04212
+1899    04     0.04212
+1899    05     0.04212
+1899    06     0.04212
+1899    07     0.04212
+1899    08     0.04212
+1899    09     0.04212
+1899    10     0.04212
+1899    11     0.04212
+1899    12     0.04212
+1900    01     0.04443
+1900    02     0.04443
+1900    03     0.04443
+1900    04     0.04443
+1900    05     0.04443
+1900    06     0.04443
+1900    07     0.04443
+1900    08     0.04443
+1900    09     0.04443
+1900    10     0.04443
+1900    11     0.04443
+1900    12     0.04443
+1901    01     0.04590
+1901    02     0.04590
+1901    03     0.04590
+1901    04     0.04590
+1901    05     0.04590
+1901    06     0.04590
+1901    07     0.04590
+1901    08     0.04590
+1901    09     0.04590
+1901    10     0.04590
+1901    11     0.04590
+1901    12     0.04590
+1902    01     0.04706
+1902    02     0.04706
+1902    03     0.04706
+1902    04     0.04706
+1902    05     0.04706
+1902    06     0.04706
+1902    07     0.04706
+1902    08     0.04706
+1902    09     0.04706
+1902    10     0.04706
+1902    11     0.04706
+1902    12     0.04706
+1903    01     0.05134
+1903    02     0.05134
+1903    03     0.05134
+1903    04     0.05134
+1903    05     0.05134
+1903    06     0.05134
+1903    07     0.05134
+1903    08     0.05134
+1903    09     0.05134
+1903    10     0.05134
+1903    11     0.05134
+1903    12     0.05134
+1904    01     0.05188
+1904    02     0.05188
+1904    03     0.05188
+1904    04     0.05188
+1904    05     0.05188
+1904    06     0.05188
+1904    07     0.05188
+1904    08     0.05188
+1904    09     0.05188
+1904    10     0.05188
+1904    11     0.05188
+1904    12     0.05188
+1905    01     0.05524
+1905    02     0.05524
+1905    03     0.05524
+1905    04     0.05524
+1905    05     0.05524
+1905    06     0.05524
+1905    07     0.05524
+1905    08     0.05524
+1905    09     0.05524
+1905    10     0.05524
+1905    11     0.05524
+1905    12     0.05524
+1906    01     0.05802
+1906    02     0.05802
+1906    03     0.05802
+1906    04     0.05802
+1906    05     0.05802
+1906    06     0.05802
+1906    07     0.05802
+1906    08     0.05802
+1906    09     0.05802
+1906    10     0.05802
+1906    11     0.05802
+1906    12     0.05802
+1907    01     0.06561
+1907    02     0.06561
+1907    03     0.06561
+1907    04     0.06561
+1907    05     0.06561
+1907    06     0.06561
+1907    07     0.06561
+1907    08     0.06561
+1907    09     0.06561
+1907    10     0.06561
+1907    11     0.06561
+1907    12     0.06561
+1908    01     0.06313
+1908    02     0.06313
+1908    03     0.06313
+1908    04     0.06313
+1908    05     0.06313
+1908    06     0.06313
+1908    07     0.06313
+1908    08     0.06313
+1908    09     0.06313
+1908    10     0.06313
+1908    11     0.06313
+1908    12     0.06313
+1909    01     0.06562
+1909    02     0.06562
+1909    03     0.06562
+1909    04     0.06562
+1909    05     0.06562
+1909    06     0.06562
+1909    07     0.06562
+1909    08     0.06562
+1909    09     0.06562
+1909    10     0.06562
+1909    11     0.06562
+1909    12     0.06562
+1910    01     0.06882
+1910    02     0.06882
+1910    03     0.06882
+1910    04     0.06882
+1910    05     0.06882
+1910    06     0.06882
+1910    07     0.06882
+1910    08     0.06882
+1910    09     0.06882
+1910    10     0.06882
+1910    11     0.06882
+1910    12     0.06882
+1911    01     0.07008
+1911    02     0.07008
+1911    03     0.07008
+1911    04     0.07008
+1911    05     0.07008
+1911    06     0.07008
+1911    07     0.07008
+1911    08     0.07008
+1911    09     0.07008
+1911    10     0.07008
+1911    11     0.07008
+1911    12     0.07008
+1912    01     0.07339
+1912    02     0.07339
+1912    03     0.07339
+1912    04     0.07339
+1912    05     0.07339
+1912    06     0.07339
+1912    07     0.07339
+1912    08     0.07339
+1912    09     0.07339
+1912    10     0.07339
+1912    11     0.07339
+1912    12     0.07339
+1913    01     0.07941
+1913    02     0.07941
+1913    03     0.07941
+1913    04     0.07941
+1913    05     0.07941
+1913    06     0.07941
+1913    07     0.07941
+1913    08     0.07941
+1913    09     0.07941
+1913    10     0.07941
+1913    11     0.07941
+1913    12     0.07941
+1914    01     0.07205
+1914    02     0.07205
+1914    03     0.07205
+1914    04     0.07205
+1914    05     0.07205
+1914    06     0.07205
+1914    07     0.07205
+1914    08     0.07205
+1914    09     0.07205
+1914    10     0.07205
+1914    11     0.07205
+1914    12     0.07205
+1915    01     0.07108
+1915    02     0.07108
+1915    03     0.07108
+1915    04     0.07108
+1915    05     0.07108
+1915    06     0.07108
+1915    07     0.07108
+1915    08     0.07108
+1915    09     0.07108
+1915    10     0.07108
+1915    11     0.07108
+1915    12     0.07108
+1916    01     0.07670
+1916    02     0.07670
+1916    03     0.07670
+1916    04     0.07670
+1916    05     0.07670
+1916    06     0.07670
+1916    07     0.07670
+1916    08     0.07670
+1916    09     0.07670
+1916    10     0.07670
+1916    11     0.07670
+1916    12     0.07670
+1917    01     0.08025
+1917    02     0.08025
+1917    03     0.08025
+1917    04     0.08025
+1917    05     0.08025
+1917    06     0.08025
+1917    07     0.08025
+1917    08     0.08025
+1917    09     0.08025
+1917    10     0.08025
+1917    11     0.08025
+1917    12     0.08025
+1918    01     0.07916
+1918    02     0.07916
+1918    03     0.07916
+1918    04     0.07916
+1918    05     0.07916
+1918    06     0.07916
+1918    07     0.07916
+1918    08     0.07916
+1918    09     0.07916
+1918    10     0.07916
+1918    11     0.07916
+1918    12     0.07916
+1919    01     0.06861
+1919    02     0.06861
+1919    03     0.06861
+1919    04     0.06861
+1919    05     0.06861
+1919    06     0.06861
+1919    07     0.06861
+1919    08     0.06861
+1919    09     0.06861
+1919    10     0.06861
+1919    11     0.06861
+1919    12     0.06861
+1920    01     0.07978
+1920    02     0.07978
+1920    03     0.07978
+1920    04     0.07978
+1920    05     0.07978
+1920    06     0.07978
+1920    07     0.07978
+1920    08     0.07978
+1920    09     0.07978
+1920    10     0.07978
+1920    11     0.07978
+1920    12     0.07978
+1921    01     0.07000
+1921    02     0.07000
+1921    03     0.07000
+1921    04     0.07000
+1921    05     0.07000
+1921    06     0.07000
+1921    07     0.07000
+1921    08     0.07000
+1921    09     0.07000
+1921    10     0.07000
+1921    11     0.07000
+1921    12     0.07000
+1922    01     0.07340
+1922    02     0.07340
+1922    03     0.07340
+1922    04     0.07340
+1922    05     0.07340
+1922    06     0.07340
+1922    07     0.07340
+1922    08     0.07340
+1922    09     0.07340
+1922    10     0.07340
+1922    11     0.07340
+1922    12     0.07340
+1923    01     0.08328
+1923    02     0.08328
+1923    03     0.08328
+1923    04     0.08328
+1923    05     0.08328
+1923    06     0.08328
+1923    07     0.08328
+1923    08     0.08328
+1923    09     0.08328
+1923    10     0.08328
+1923    11     0.08328
+1923    12     0.08328
+1924    01     0.08355
+1924    02     0.08355
+1924    03     0.08355
+1924    04     0.08355
+1924    05     0.08355
+1924    06     0.08355
+1924    07     0.08355
+1924    08     0.08355
+1924    09     0.08355
+1924    10     0.08355
+1924    11     0.08355
+1924    12     0.08355
+1925    01     0.08413
+1925    02     0.08413
+1925    03     0.08413
+1925    04     0.08413
+1925    05     0.08413
+1925    06     0.08413
+1925    07     0.08413
+1925    08     0.08413
+1925    09     0.08413
+1925    10     0.08413
+1925    11     0.08413
+1925    12     0.08413
+1926    01     0.08283
+1926    02     0.08283
+1926    03     0.08283
+1926    04     0.08283
+1926    05     0.08283
+1926    06     0.08283
+1926    07     0.08283
+1926    08     0.08283
+1926    09     0.08283
+1926    10     0.08283
+1926    11     0.08283
+1926    12     0.08283
+1927    01     0.09046
+1927    02     0.09046
+1927    03     0.09046
+1927    04     0.09046
+1927    05     0.09046
+1927    06     0.09046
+1927    07     0.09046
+1927    08     0.09046
+1927    09     0.09046
+1927    10     0.09046
+1927    11     0.09046
+1927    12     0.09046
+1928    01     0.09077
+1928    02     0.09077
+1928    03     0.09077
+1928    04     0.09077
+1928    05     0.09077
+1928    06     0.09077
+1928    07     0.09077
+1928    08     0.09077
+1928    09     0.09077
+1928    10     0.09077
+1928    11     0.09077
+1928    12     0.09077
+1929    01     0.09759
+1929    02     0.09759
+1929    03     0.09759
+1929    04     0.09759
+1929    05     0.09759
+1929    06     0.09759
+1929    07     0.09759
+1929    08     0.09759
+1929    09     0.09759
+1929    10     0.09759
+1929    11     0.09759
+1929    12     0.09759
+1930    01     0.09022
+1930    02     0.09022
+1930    03     0.09022
+1930    04     0.09022
+1930    05     0.09022
+1930    06     0.09022
+1930    07     0.09022
+1930    08     0.09022
+1930    09     0.09022
+1930    10     0.09022
+1930    11     0.09022
+1930    12     0.09022
+1931    01     0.08058
+1931    02     0.08058
+1931    03     0.08058
+1931    04     0.08058
+1931    05     0.08058
+1931    06     0.08058
+1931    07     0.08058
+1931    08     0.08058
+1931    09     0.08058
+1931    10     0.08058
+1931    11     0.08058
+1931    12     0.08058
+1932    01     0.07270
+1932    02     0.07270
+1932    03     0.07270
+1932    04     0.07270
+1932    05     0.07270
+1932    06     0.07270
+1932    07     0.07270
+1932    08     0.07270
+1932    09     0.07270
+1932    10     0.07270
+1932    11     0.07270
+1932    12     0.07270
+1933    01     0.07655
+1933    02     0.07655
+1933    03     0.07655
+1933    04     0.07655
+1933    05     0.07655
+1933    06     0.07655
+1933    07     0.07655
+1933    08     0.07655
+1933    09     0.07655
+1933    10     0.07655
+1933    11     0.07655
+1933    12     0.07655
+1934    01     0.08328
+1934    02     0.08328
+1934    03     0.08328
+1934    04     0.08328
+1934    05     0.08328
+1934    06     0.08328
+1934    07     0.08328
+1934    08     0.08328
+1934    09     0.08328
+1934    10     0.08328
+1934    11     0.08328
+1934    12     0.08328
+1935    01     0.08748
+1935    02     0.08748
+1935    03     0.08748
+1935    04     0.08748
+1935    05     0.08748
+1935    06     0.08748
+1935    07     0.08748
+1935    08     0.08748
+1935    09     0.08748
+1935    10     0.08748
+1935    11     0.08748
+1935    12     0.08748
+1936    01     0.09606
+1936    02     0.09606
+1936    03     0.09606
+1936    04     0.09606
+1936    05     0.09606
+1936    06     0.09606
+1936    07     0.09606
+1936    08     0.09606
+1936    09     0.09606
+1936    10     0.09606
+1936    11     0.09606
+1936    12     0.09606
+1937    01     0.10287
+1937    02     0.10287
+1937    03     0.10287
+1937    04     0.10287
+1937    05     0.10287
+1937    06     0.10287
+1937    07     0.10287
+1937    08     0.10287
+1937    09     0.10287
+1937    10     0.10287
+1937    11     0.10287
+1937    12     0.10287
+1938    01     0.09700
+1938    02     0.09700
+1938    03     0.09700
+1938    04     0.09700
+1938    05     0.09700
+1938    06     0.09700
+1938    07     0.09700
+1938    08     0.09700
+1938    09     0.09700
+1938    10     0.09700
+1938    11     0.09700
+1938    12     0.09700
+1939    01     0.10242
+1939    02     0.10242
+1939    03     0.10242
+1939    04     0.10242
+1939    05     0.10242
+1939    06     0.10242
+1939    07     0.10242
+1939    08     0.10242
+1939    09     0.10242
+1939    10     0.10242
+1939    11     0.10242
+1939    12     0.10242
+1940    01     0.11154
+1940    02     0.11154
+1940    03     0.11154
+1940    04     0.11154
+1940    05     0.11154
+1940    06     0.11154
+1940    07     0.11154
+1940    08     0.11154
+1940    09     0.11154
+1940    10     0.11154
+1940    11     0.11154
+1940    12     0.11154
+1941    01     0.11428
+1941    02     0.11428
+1941    03     0.11428
+1941    04     0.11428
+1941    05     0.11428
+1941    06     0.11428
+1941    07     0.11428
+1941    08     0.11428
+1941    09     0.11428
+1941    10     0.11428
+1941    11     0.11428
+1941    12     0.11428
+1942    01     0.11463
+1942    02     0.11463
+1942    03     0.11463
+1942    04     0.11463
+1942    05     0.11463
+1942    06     0.11463
+1942    07     0.11463
+1942    08     0.11463
+1942    09     0.11463
+1942    10     0.11463
+1942    11     0.11463
+1942    12     0.11463
+1943    01     0.11864
+1943    02     0.11864
+1943    03     0.11864
+1943    04     0.11864
+1943    05     0.11864
+1943    06     0.11864
+1943    07     0.11864
+1943    08     0.11864
+1943    09     0.11864
+1943    10     0.11864
+1943    11     0.11864
+1943    12     0.11864
+1944    01     0.11784
+1944    02     0.11784
+1944    03     0.11784
+1944    04     0.11784
+1944    05     0.11784
+1944    06     0.11784
+1944    07     0.11784
+1944    08     0.11784
+1944    09     0.11784
+1944    10     0.11784
+1944    11     0.11784
+1944    12     0.11784
+1945    01     0.09856
+1945    02     0.09856
+1945    03     0.09856
+1945    04     0.09856
+1945    05     0.09856
+1945    06     0.09856
+1945    07     0.09856
+1945    08     0.09856
+1945    09     0.09856
+1945    10     0.09856
+1945    11     0.09856
+1945    12     0.09856
+1946    01     0.10759
+1946    02     0.10759
+1946    03     0.10759
+1946    04     0.10759
+1946    05     0.10759
+1946    06     0.10759
+1946    07     0.10759
+1946    08     0.10759
+1946    09     0.10759
+1946    10     0.10759
+1946    11     0.10759
+1946    12     0.10759
+1947    01     0.11910
+1947    02     0.11910
+1947    03     0.11910
+1947    04     0.11910
+1947    05     0.11910
+1947    06     0.11910
+1947    07     0.11910
+1947    08     0.11910
+1947    09     0.11910
+1947    10     0.11910
+1947    11     0.11910
+1947    12     0.11910
+1948    01     0.12530
+1948    02     0.12530
+1948    03     0.12530
+1948    04     0.12530
+1948    05     0.12530
+1948    06     0.12530
+1948    07     0.12530
+1948    08     0.12530
+1948    09     0.12530
+1948    10     0.12530
+1948    11     0.12530
+1948    12     0.12530
+1949    01     0.11929
+1949    02     0.11929
+1949    03     0.11929
+1949    04     0.11929
+1949    05     0.11929
+1949    06     0.11929
+1949    07     0.11929
+1949    08     0.11929
+1949    09     0.11929
+1949    10     0.11929
+1949    11     0.11929
+1949    12     0.11929
+1950    01     0.14254
+1950    02     0.13288
+1950    03     0.13844
+1950    04     0.12547
+1950    05     0.12480
+1950    06     0.12823
+1950    07     0.12979
+1950    08     0.12872
+1950    09     0.12622
+1950    10     0.13000
+1950    11     0.13141
+1950    12     0.14217
+1951    01     0.15935
+1951    02     0.14657
+1951    03     0.14810
+1951    04     0.13441
+1951    05     0.13222
+1951    06     0.13027
+1951    07     0.13662
+1951    08     0.13652
+1951    09     0.13530
+1951    10     0.14132
+1951    11     0.14085
+1951    12     0.15794
+1952    01     0.15159
+1952    02     0.14263
+1952    03     0.14879
+1952    04     0.13765
+1952    05     0.13726
+1952    06     0.13673
+1952    07     0.14019
+1952    08     0.14205
+1952    09     0.13916
+1952    10     0.14501
+1952    11     0.14389
+1952    12     0.15748
+1953    01     0.16150
+1953    02     0.15130
+1953    03     0.15798
+1953    04     0.14264
+1953    05     0.13798
+1953    06     0.13900
+1953    07     0.14448
+1953    08     0.14201
+1953    09     0.13874
+1953    10     0.14631
+1953    11     0.14672
+1953    12     0.16165
+1954    01     0.16274
+1954    02     0.14824
+1954    03     0.15601
+1954    04     0.14747
+1954    05     0.14321
+1954    06     0.14364
+1954    07     0.14835
+1954    08     0.14551
+1954    09     0.14580
+1954    10     0.14966
+1954    11     0.15296
+1954    12     0.16570
+1955    01     0.17489
+1955    02     0.16066
+1955    03     0.17040
+1955    04     0.15916
+1955    05     0.15753
+1955    06     0.15754
+1955    07     0.16206
+1955    08     0.16271
+1955    09     0.15875
+1955    10     0.16526
+1955    11     0.16975
+1955    12     0.18225
+1956    01     0.19891
+1956    02     0.17797
+1956    03     0.18326
+1956    04     0.16506
+1956    05     0.16554
+1956    06     0.16120
+1956    07     0.16987
+1956    08     0.16807
+1956    09     0.16650
+1956    10     0.17674
+1956    11     0.18014
+1956    12     0.19515
+1957    01     0.19233
+1957    02     0.17574
+1957    03     0.18620
+1957    04     0.17130
+1957    05     0.17455
+1957    06     0.17333
+1957    07     0.17941
+1957    08     0.17922
+1957    09     0.17465
+1957    10     0.18372
+1957    11     0.18318
+1957    12     0.20018
+1958    01     0.20399
+1958    02     0.18578
+1958    03     0.19684
+1958    04     0.18037
+1958    05     0.17910
+1958    06     0.17435
+1958    07     0.17993
+1958    08     0.18173
+1958    09     0.17834
+1958    10     0.18602
+1958    11     0.18856
+1958    12     0.20723
+1959    01     0.21650
+1959    02     0.19742
+1959    03     0.20628
+1959    04     0.19101
+1959    05     0.18853
+1959    06     0.18435
+1959    07     0.19125
+1959    08     0.19295
+1959    09     0.18788
+1959    10     0.19829
+1959    11     0.19904
+1959    12     0.21414
+1960    01     0.22003
+1960    02     0.20343
+1960    03     0.21871
+1960    04     0.20098
+1960    05     0.19659
+1960    06     0.19821
+1960    07     0.20283
+1960    08     0.20263
+1960    09     0.19895
+1960    10     0.20842
+1960    11     0.21132
+1960    12     0.23226
+1961    01     0.22145
+1961    02     0.20501
+1961    03     0.21897
+1961    04     0.20044
+1961    05     0.19788
+1961    06     0.19739
+1961    07     0.20320
+1961    08     0.20298
+1961    09     0.19990
+1961    10     0.20913
+1961    11     0.20972
+1961    12     0.23262
+1962    01     0.23263
+1962    02     0.21447
+1962    03     0.23114
+1962    04     0.20856
+1962    05     0.20389
+1962    06     0.20513
+1962    07     0.20702
+1962    08     0.21062
+1962    09     0.20466
+1962    10     0.21275
+1962    11     0.21745
+1962    12     0.23897
+1963    01     0.25173
+1963    02     0.22890
+1963    03     0.23960
+1963    04     0.21975
+1963    05     0.21415
+1963    06     0.21508
+1963    07     0.21858
+1963    08     0.21936
+1963    09     0.21833
+1963    10     0.22966
+1963    11     0.22872
+1963    12     0.25001
+1964    01     0.26367
+1964    02     0.23907
+1964    03     0.24564
+1964    04     0.23033
+1964    05     0.22285
+1964    06     0.22690
+1964    07     0.23369
+1964    08     0.23105
+1964    09     0.23182
+1964    10     0.24116
+1964    11     0.24041
+1964    12     0.26380
+1965    01     0.26961
+1965    02     0.24919
+1965    03     0.26443
+1965    04     0.24103
+1965    05     0.23849
+1965    06     0.23922
+1965    07     0.24427
+1965    08     0.24589
+1965    09     0.24054
+1965    10     0.25083
+1965    11     0.25314
+1965    12     0.26931
+1966    01     0.27757
+1966    02     0.26156
+1966    03     0.27639
+1966    04     0.25299
+1966    05     0.24907
+1966    06     0.25045
+1966    07     0.25721
+1966    08     0.25819
+1966    09     0.25031
+1966    10     0.25803
+1966    11     0.26634
+1966    12     0.28588
+1967    01     0.29057
+1967    02     0.26854
+1967    03     0.28371
+1967    04     0.26214
+1967    05     0.25662
+1967    06     0.25731
+1967    07     0.26185
+1967    08     0.26429
+1967    09     0.26004
+1967    10     0.27074
+1967    11     0.27184
+1967    12     0.29417
+1968    01     0.30937
+1968    02     0.28586
+1968    03     0.29983
+1968    04     0.27441
+1968    05     0.27032
+1968    06     0.27244
+1968    07     0.27511
+1968    08     0.27604
+1968    09     0.27467
+1968    10     0.28513
+1968    11     0.28733
+1968    12     0.31106
+1969    01     0.32687
+1969    02     0.30360
+1969    03     0.31995
+1969    04     0.29428
+1969    05     0.28947
+1969    06     0.29128
+1969    07     0.29507
+1969    08     0.29676
+1969    09     0.29160
+1969    10     0.30338
+1969    11     0.30576
+1969    12     0.33040
+1970    01     0.35044
+1970    02     0.32520
+1970    03     0.34326
+1970    04     0.32017
+1970    05     0.31528
+1970    06     0.31787
+1970    07     0.32351
+1970    08     0.32331
+1970    09     0.31418
+1970    10     0.32918
+1970    11     0.33251
+1970    12     0.35981
+1971    01     0.36660
+1971    02     0.33850
+1971    03     0.35976
+1971    04     0.33200
+1971    05     0.32836
+1971    06     0.32665
+1971    07     0.33442
+1971    08     0.33709
+1971    09     0.32410
+1971    10     0.34196
+1971    11     0.34696
+1971    12     0.37605
+1972    01     0.37912
+1972    02     0.35696
+1972    03     0.37960
+1972    04     0.34507
+1972    05     0.34246
+1972    06     0.34484
+1972    07     0.35058
+1972    08     0.35603
+1972    09     0.34233
+1972    10     0.35530
+1972    11     0.35720
+1972    12     0.39016
+1973    01     0.39642
+1973    02     0.37592
+1973    03     0.40179
+1973    04     0.36549
+1973    05     0.36229
+1973    06     0.36406
+1973    07     0.36994
+1973    08     0.37289
+1973    09     0.36206
+1973    10     0.37974
+1973    11     0.38227
+1973    12     0.41065
+1974    01     0.40205
+1974    02     0.37961
+1974    03     0.39627
+1974    04     0.36430
+1974    05     0.35815
+1974    06     0.35885
+1974    07     0.36762
+1974    08     0.36800
+1974    09     0.36202
+1974    10     0.37656
+1974    11     0.38110
+1974    12     0.41320
+1975    01     0.40312
+1975    02     0.37405
+1975    03     0.39671
+1975    04     0.36505
+1975    05     0.35863
+1975    06     0.35880
+1975    07     0.36848
+1975    08     0.37240
+1975    09     0.35946
+1975    10     0.37848
+1975    11     0.38342
+1975    12     0.41149
+1976    01     0.42405
+1976    02     0.39429
+1976    03     0.41667
+1976    04     0.38470
+1976    05     0.38014
+1976    06     0.37740
+1976    07     0.38619
+1976    08     0.39273
+1976    09     0.37698
+1976    10     0.40133
+1976    11     0.40265
+1976    12     0.44093
+1977    01     0.43427
+1977    02     0.40397
+1977    03     0.42718
+1977    04     0.39226
+1977    05     0.38731
+1977    06     0.39141
+1977    07     0.39709
+1977    08     0.39983
+1977    09     0.39052
+1977    10     0.41031
+1977    11     0.41519
+1977    12     0.45146
+1978    01     0.45106
+1978    02     0.41714
+1978    03     0.44740
+1978    04     0.41410
+1978    05     0.40291
+1978    06     0.40450
+1978    07     0.41344
+1978    08     0.41321
+1978    09     0.40805
+1978    10     0.42730
+1978    11     0.42823
+1978    12     0.46653
+1979    01     0.46495
+1979    02     0.42913
+1979    03     0.45497
+1979    04     0.42205
+1979    05     0.41534
+1979    06     0.41431
+1979    07     0.42716
+1979    08     0.42901
+1979    09     0.42001
+1979    10     0.43717
+1979    11     0.43900
+1979    12     0.47400
+1980    01     0.46589
+1980    02     0.42724
+1980    03     0.45960
+1980    04     0.42578
+1980    05     0.41192
+1980    06     0.41260
+1980    07     0.41933
+1980    08     0.42124
+1980    09     0.41393
+1980    10     0.43051
+1980    11     0.43968
+1980    12     0.47852
+1981    01     0.45338
+1981    02     0.41805
+1981    03     0.44170
+1981    04     0.40981
+1981    05     0.40115
+1981    06     0.40423
+1981    07     0.41149
+1981    08     0.41173
+1981    09     0.40181
+1981    10     0.42606
+1981    11     0.42592
+1981    12     0.46301
+1982    01     0.45253
+1982    02     0.41620
+1982    03     0.44602
+1982    04     0.40994
+1982    05     0.40217
+1982    06     0.40362
+1982    07     0.40991
+1982    08     0.41227
+1982    09     0.40062
+1982    10     0.41919
+1982    11     0.42760
+1982    12     0.45191
+1983    01     0.44717
+1983    02     0.41003
+1983    03     0.44927
+1983    04     0.41086
+1983    05     0.40281
+1983    06     0.40599
+1983    07     0.41005
+1983    08     0.42237
+1983    09     0.40992
+1983    10     0.42786
+1983    11     0.43369
+1983    12     0.47775
+1984    01     0.46924
+1984    02     0.43782
+1984    03     0.46739
+1984    04     0.42628
+1984    05     0.42004
+1984    06     0.41940
+1984    07     0.42130
+1984    08     0.43029
+1984    09     0.41423
+1984    10     0.43852
+1984    11     0.44366
+1984    12     0.46897
+1985    01     0.49039
+1985    02     0.45125
+1985    03     0.47511
+1985    04     0.43721
+1985    05     0.42990
+1985    06     0.42791
+1985    07     0.43784
+1985    08     0.44033
+1985    09     0.43260
+1985    10     0.45930
+1985    11     0.45762
+1985    12     0.50171
+1986    01     0.49250
+1986    02     0.45605
+1986    03     0.48126
+1986    04     0.44691
+1986    05     0.43774
+1986    06     0.43678
+1986    07     0.45002
+1986    08     0.44552
+1986    09     0.43707
+1986    10     0.46278
+1986    11     0.46216
+1986    12     0.50839
+1987    01     0.50518
+1987    02     0.46531
+1987    03     0.49902
+1987    04     0.45700
+1987    05     0.44995
+1987    06     0.45930
+1987    07     0.46630
+1987    08     0.46879
+1987    09     0.45651
+1987    10     0.48036
+1987    11     0.47931
+1987    12     0.52508
+1988    01     0.52287
+1988    02     0.49020
+1988    03     0.52344
+1988    04     0.47681
+1988    05     0.46679
+1988    06     0.47468
+1988    07     0.47848
+1988    08     0.48788
+1988    09     0.46872
+1988    10     0.49329
+1988    11     0.50313
+1988    12     0.54784
+1989    01     0.52160
+1989    02     0.48900
+1989    03     0.52893
+1989    04     0.48100
+1989    05     0.47522
+1989    06     0.47870
+1989    07     0.48225
+1989    08     0.49235
+1989    09     0.47963
+1989    10     0.50682
+1989    11     0.51321
+1989    12     0.56321
+1990    01     0.52825
+1990    02     0.48003
+1990    03     0.52435
+1990    04     0.48222
+1990    05     0.47486
+1990    06     0.47687
+1990    07     0.48079
+1990    08     0.49310
+1990    09     0.47797
+1990    10     0.50034
+1990    11     0.50422
+1990    12     0.54897
+1991    01     0.54627
+1991    02     0.50384
+1991    03     0.54382
+1991    04     0.50221
+1991    05     0.49971
+1991    06     0.49047
+1991    07     0.49777
+1991    08     0.49794
+1991    09     0.48224
+1991    10     0.51357
+1991    11     0.51524
+1991    12     0.55837
+1992    01     0.53393
+1992    02     0.49643
+1992    03     0.52687
+1992    04     0.48699
+1992    05     0.47703
+1992    06     0.47369
+1992    07     0.48599
+1992    08     0.48282
+1992    09     0.47853
+1992    10     0.50745
+1992    11     0.51389
+1992    12     0.55485
+1993    01     0.52888
+1993    02     0.50462
+1993    03     0.54321
+1993    04     0.49169
+1993    05     0.47737
+1993    06     0.48059
+1993    07     0.49303
+1993    08     0.49487
+1993    09     0.48453
+1993    10     0.51108
+1993    11     0.52403
+1993    12     0.56392
+1994    01     0.54106
+1994    02     0.50750
+1994    03     0.53564
+1994    04     0.49246
+1994    05     0.48723
+1994    06     0.48884
+1994    07     0.49166
+1994    08     0.50242
+1994    09     0.48732
+1994    10     0.51256
+1994    11     0.51646
+1994    12     0.55960
+1995    01     0.54184
+1995    02     0.51069
+1995    03     0.54924
+1995    04     0.49775
+1995    05     0.50171
+1995    06     0.49361
+1995    07     0.50327
+1995    08     0.51184
+1995    09     0.49449
+1995    10     0.51557
+1995    11     0.53151
+1995    12     0.58021
+1996    01     0.56457
+1996    02     0.53318
+1996    03     0.56069
+1996    04     0.51202
+1996    05     0.51159
+1996    06     0.50331
+1996    07     0.51931
+1996    08     0.52037
+1996    09     0.50864
+1996    10     0.53560
+1996    11     0.54387
+1996    12     0.58743
+1997    01     0.56862
+1997    02     0.51754
+1997    03     0.55221
+1997    04     0.51650
+1997    05     0.51358
+1997    06     0.50622
+1997    07     0.52732
+1997    08     0.52530
+1997    09     0.51648
+1997    10     0.54894
+1997    11     0.54996
+1997    12     0.59650
+1998    01     0.55336
+1998    02     0.51716
+1998    03     0.55550
+1998    04     0.50978
+1998    05     0.50603
+1998    06     0.50691
+1998    07     0.51977
+1998    08     0.51804
+1998    09     0.50830
+1998    10     0.52917
+1998    11     0.53637
+1998    12     0.58201
+1999    01     0.55720
+1999    02     0.51202
+1999    03     0.55864
+1999    04     0.51028
+1999    05     0.50580
+1999    06     0.50608
+1999    07     0.51848
+1999    08     0.52092
+1999    09     0.50601
+1999    10     0.52726
+1999    11     0.53895
+1999    12     0.58005
+2000    01     0.57314
+2000    02     0.55079
+2000    03     0.57086
+2000    04     0.51994
+2000    05     0.52341
+2000    06     0.52229
+2000    07     0.52676
+2000    08     0.54093
+2000    09     0.52664
+2000    10     0.54410
+2000    11     0.55450
+2000    12     0.60297
+2001    01     0.58647
+2001    02     0.54321
+2001    03     0.58069
+2001    04     0.53177
+2001    05     0.53513
+2001    06     0.52555
+2001    07     0.53887
+2001    08     0.54453
+2001    09     0.52289
+2001    10     0.54891
+2001    11     0.55360
+2001    12     0.59173
+2002    01     0.59298
+2002    02     0.54028
+2002    03     0.57896
+2002    04     0.53894
+2002    05     0.53658
+2002    06     0.53557
+2002    07     0.55276
+2002    08     0.55043
+2002    09     0.53663
+2002    10     0.57000
+2002    11     0.57302
+2002    12     0.61363
+2003    01     0.62731
+2003    02     0.58055
+2003    03     0.60857
+2003    04     0.56092
+2003    05     0.55414
+2003    06     0.55420
+2003    07     0.56987
+2003    08     0.57205
+2003    09     0.55958
+2003    10     0.59610
+2003    11     0.60060
+2003    12     0.65321
+2004    01     0.64882
+2004    02     0.61456
+2004    03     0.64419
+2004    04     0.59265
+2004    05     0.58759
+2004    06     0.58463
+2004    07     0.59878
+2004    08     0.59835
+2004    09     0.59342
+2004    10     0.61716
+2004    11     0.62511
+2004    12     0.68284
+2005    01     0.67566
+2005    02     0.61536
+2005    03     0.66544
+2005    04     0.61158
+2005    05     0.60571
+2005    06     0.61097
+2005    07     0.61800
+2005    08     0.62523
+2005    09     0.61036
+2005    10     0.62953
+2005    11     0.64066
+2005    12     0.70520
+2006    01     0.67556
+2006    02     0.63269
+2006    03     0.68363
+2006    04     0.62148
+2006    05     0.62526
+2006    06     0.62507
+2006    07     0.64087
+2006    08     0.64627
+2006    09     0.63042
+2006    10     0.65911
+2006    11     0.66051
+2006    12     0.71582
+2007    01     0.69849
+2007    02     0.65680
+2007    03     0.69762
+2007    04     0.64523
+2007    05     0.64697
+2007    06     0.65051
+2007    07     0.65709
+2007    08     0.67078
+2007    09     0.64786
+2007    10     0.67711
+2007    11     0.68544
+2007    12     0.73625
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_L19
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_L19	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_L19	(revision 2330)
@@ -0,0 +1,63 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=12
+
+##  Facteur additif pour l'albedo
+pmagic=0.008
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_: DEFAULT = 1361.
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_: DEFAULT = 367.
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_: DEFAULT = 1760.
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_: DEFAULT = 316.
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_: DEFAULT = 741.2
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_: DEFAULT = 535.
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_actuel
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_actuel	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_actuel	(revision 2330)
@@ -0,0 +1,63 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic=0.008
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_ : DEFAULT = 1366.0896
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_: DEFAULT = 0.36886500E+03
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_ : DEFAULT = 0.17510225E+04
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_ : DEFAULT = 0.31585000E+03
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_ : DEFAULT = 5.18015181E+01
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_ : DEFAULT = 0.99862742E+03
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_annuel
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_annuel	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_annuel	(revision 2330)
@@ -0,0 +1,63 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic=0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_ 
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=annuel
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_ 
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_preind
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_preind	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/config.def_preind	(revision 2330)
@@ -0,0 +1,63 @@
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+
+##  Facteur additif pour l'albedo
+pmagic=0.0
+
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = _AUTO_: DEFAULT = 1365.6537
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = _AUTO_: DEFAULT = 0.28472500E+03
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = _AUTO_: DEFAULT = 0.79097924E+03
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = _AUTO_: DEFAULT = 0.27542506E+03
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = _AUTO_: DEFAULT = 0.
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = _AUTO_: DEFAULT = 0.
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=_AUTO_
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=_AUTO_
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=preind
+### aerosol coupling = online (y) or offline (n)
+aerosol_couple=_AUTO_
+###  flag_aerosol = type of coupled aerosol, if aerosol offline 
+###  0 => no aerosol, 1 => sulfate only, 2 => bc only, 3 => pom only, 4 => seasalt only, 5 => dust only, 6 => all aerosol
+flag_aerosol=_AUTO_
+### ok_cdnc=y/n   Cloud droplet number concentration
+ok_cdnc=_AUTO_
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=_AUTO_
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/cosp_input_nl.txt
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/cosp_input_nl.txt	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/cosp_input_nl.txt	(revision 2330)
@@ -0,0 +1,103 @@
+! (c) British Crown Copyright 2008, the Met Office.
+! All rights reserved.
+! 
+! Redistribution and use in source and binary forms, with or without modification, are permitted 
+! provided that the following conditions are met:
+! 
+!     * Redistributions of source code must retain the above copyright notice, this list 
+!       of conditions and the following disclaimer.
+!     * Redistributions in binary form must reproduce the above copyright notice, this list
+!       of conditions and the following disclaimer in the documentation and/or other materials 
+!       provided with the distribution.
+!     * Neither the name of the Met Office nor the names of its contributors may be used 
+!       to endorse or promote products derived from this software without specific prior written 
+!       permission.
+! 
+! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 
+! IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
+! FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 
+! CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+! DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
+! IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 
+! OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+! Namelist that sets up the main COSP options
+&COSP_INPUT
+  CMOR_NL='./cmor/cosp_cmor_nl.txt', ! CMOR namelist
+  NPOINTS_IT=10000,! Max number of gridpoints to be processed in one iteration
+  NCOLUMNS=20,  ! Number of subcolumns
+  NLEVELS=39,   ! Number of model levels 
+  USE_VGRID=.true., ! Use fixed vertical grid for outputs? (if .true. then you need to define number of levels with Nlr)
+  NLR=40,       ! Number of levels in statistical outputs (only used if USE_VGRID=.true.)
+  CSAT_VGRID=.true., ! CloudSat vertical grid? (if .true. then the CloudSat standard grid is used for the outputs.
+                     !  USE_VGRID needs also be .true.)
+  FINPUT='histday.nc', ! NetCDF file with 1D inputs
+!  FINPUT='cosp_input_um_2d.nc', ! NetCDF file with 2D inputs
+  !----------------------------------------------------------------------------------
+  !--------------- Inputs related to radar simulations
+  !----------------------------------------------------------------------------------
+  RADAR_FREQ=94.0, ! CloudSat radar frequency (GHz)
+  SURFACE_RADAR=0, ! surface=1, spaceborne=0
+  use_mie_tables=0,! use a precomputed lookup table? yes=1,no=0
+  use_gas_abs=1,   ! include gaseous absorption? yes=1,no=0
+  do_ray=0,        ! calculate/output Rayleigh refl=1, not=0
+  melt_lay=0,      ! melting layer model off=0, on=1
+  k2=-1,           ! |K|^2, -1=use frequency dependent default
+  use_reff=.true., ! True if you want effective radius to be used by radar simulator (always used by lidar)
+  use_precipitation_fluxes=.true.,  ! True if precipitation fluxes are input to the algorithm 
+  !----------------------------------------------------------------------------------
+  !---------------- Inputs related to lidar simulations
+  !----------------------------------------------------------------------------------
+  Nprmts_max_hydro=12, ! Max number of parameters for hydrometeor size distributions
+  Naero=1,             ! Number of aerosol species (Not used)
+  Nprmts_max_aero=1,   ! Max number of parameters for aerosol size distributions (Not used)
+  lidar_ice_type=0,    ! Ice particle shape in lidar calculations (0=ice-spheres ; 1=ice-non-spherical)
+  OVERLAP=3,   !  overlap type: 1=max, 2=rand, 3=max/rand
+  !----------------------------------------------------------------------------------
+  !---------------- Inputs related to ISCCP simulator
+  !----------------------------------------------------------------------------------
+  ISCCP_TOPHEIGHT=1,  !  1 = adjust top height using both a computed
+                       !  infrared brightness temperature and the visible
+                       !  optical depth to adjust cloud top pressure. Note
+                       !  that this calculation is most appropriate to compare
+                       !  to ISCCP data during sunlit hours.
+                      !  2 = do not adjust top height, that is cloud top
+                       !  pressure is the actual cloud top pressure
+                       !  in the model
+                      !  3 = adjust top height using only the computed
+                       !  infrared brightness temperature. Note that this
+                       !  calculation is most appropriate to compare to ISCCP
+                       !  IR only algortihm (i.e. you can compare to nighttime
+                       !  ISCCP data with this option)
+  ISCCP_TOPHEIGHT_DIRECTION=2,   ! direction for finding atmosphere pressure level
+                                 ! with interpolated temperature equal to the radiance
+                                 ! determined cloud-top temperature
+                                 ! 1 = find the *lowest* altitude (highest pressure) level
+                                 ! with interpolated temperature equal to the radiance
+                                 ! determined cloud-top temperature
+                                 ! 2 = find the *highest* altitude (lowest pressure) level
+                                 ! with interpolated temperature equal to the radiance 
+                                 ! determined cloud-top temperature
+                                 ! ONLY APPLICABLE IF top_height EQUALS 1 or 3
+                                 ! 1 = default setting, and matches all versions of 
+                                 ! ISCCP simulator with versions numbers 3.5.1 and lower
+                                 ! 2 = experimental setting  
+  !----------------------------------------------------------------------------------
+  !-------------- RTTOV inputs
+  !----------------------------------------------------------------------------------
+  Platform=1,    ! satellite platform
+  Satellite=15,  ! satellite
+  Instrument=0,  ! instrument
+  Nchannels=8,   ! Number of channels to be computed
+  Channels=1,3,5,6,8,10,11,13,        ! Channel numbers (please be sure that you supply Nchannels)
+  Surfem=0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,  ! Surface emissivity (please be sure that you supply Nchannels)
+  ZenAng=50.0, ! Satellite Zenith Angle
+  CO2=5.241e-04, ! Mixing ratios of trace gases
+  CH4=9.139e-07,
+  N2O=4.665e-07,
+  CO=2.098e-07
+/
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/cosp_output_nl.txt
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/cosp_output_nl.txt	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/cosp_output_nl.txt	(revision 2330)
@@ -0,0 +1,63 @@
+! (c) British Crown Copyright 2008, the Met Office.
+! All rights reserved.
+! 
+! Redistribution and use in source and binary forms, with or without modification, are permitted 
+! provided that the following conditions are met:
+! 
+!     * Redistributions of source code must retain the above copyright notice, this list 
+!       of conditions and the following disclaimer.
+!     * Redistributions in binary form must reproduce the above copyright notice, this list
+!       of conditions and the following disclaimer in the documentation and/or other materials 
+!       provided with the distribution.
+!     * Neither the name of the Met Office nor the names of its contributors may be used 
+!       to endorse or promote products derived from this software without specific prior written 
+!       permission.
+! 
+! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 
+! IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
+! FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 
+! CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+! DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
+! IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 
+! OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+! Namelist that sets up output-related variables. It controls 
+! the instrument simulators to run and the list of variables 
+! to be written to file
+&COSP_OUTPUT
+  ! Simulator flags
+  Lradar_sim=.false.,
+  Llidar_sim=.true.,
+  Lisccp_sim=.true.,
+  Lmisr_sim=.false.,
+  ! Output variables
+  Lalbisccp=.true.,
+  Latb532=.false.,
+  Lboxptopisccp=.true.,
+  Lboxtauisccp=.true.,
+  Lcfad_dbze94=.false.,
+  Lcfad_lidarsr532=.true.,
+  Lclcalipso=.true.,
+  Lclhcalipso=.true.,
+  Lclisccp2=.true.,
+  Lcllcalipso=.true.,
+  Lclmcalipso=.true.,
+  Lcltcalipso=.true.,
+  Lctpisccp=.true.,
+  Ldbze94=.false.,
+  Ltauisccp=.true.,
+  Ltclisccp=.true.,
+  Llongitude=.false.,
+  Llatitude=.false.,
+  Lparasol_refl=.true.,
+  LclMISR=.false.,
+  Lmeantbisccp=.true.,
+  Lmeantbclrisccp=.true.,
+  ! Use lidar and radar
+  Lclcalipso2=.false.,
+  Lcltlidarradar=.false.,
+  ! These are provided for debugging or special purposes
+  Lfrac_out=.false.,
+  Lbeta_mol532=.false.,  
+/
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_144x142x19
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_144x142x19	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_144x142x19	(revision 2330)
@@ -0,0 +1,54 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+## iphysiq est modifie pour la nouvelle physique par le lmdz.driver pour les autres cas le valeur par defaut est utilise
+iphysiq=_AUTO_ : DEFAULT = 15
+##  Avec ou sans strato
+ok_strato=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=1
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=1.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_144x142x39
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_144x142x39	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_144x142x39	(revision 2330)
@@ -0,0 +1,54 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+## iphysiq est modifie pour la nouvelle physique par le lmdz.driver pour les autres cas le valeur par defaut est utilise
+iphysiq=_AUTO_ : DEFAULT = 15
+##  Avec ou sans strato
+ok_strato=y
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_96x95x19
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_96x95x19	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_96x95x19	(revision 2330)
@@ -0,0 +1,54 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+## iphysiq est modifie pour la nouvelle physique par le lmdz.driver pour les autres cas le valeur par defaut est utilise
+iphysiq=_AUTO_ : DEFAULT = 10
+##  Avec ou sans strato
+ok_strato=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=1
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=1.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_96x95x39
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_96x95x39	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/gcm.def_96x95x39	(revision 2330)
@@ -0,0 +1,54 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+## iphysiq est modifie pour la nouvelle physique par le lmdz.driver pour les autres cas le valeur par defaut est utilise
+iphysiq=_AUTO_ : DEFAULT = 10
+##  Avec ou sans strato
+ok_strato=y 
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/guide.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/guide.def	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/guide.def	(revision 2330)
@@ -0,0 +1,16 @@
+# ok_guide=y : guidage active
+ok_guide=_AUTO_ : DEFFAULT = n
+#
+guide_u= y
+guide_v= y
+guide_T= n
+guide_P= n
+guide_Q= n
+
+ini_anal=n
+tau_min_u=0.0208333
+tau_max_u=0.125
+tau_min_v=0.0208333
+tau_max_v=0.125
+#tau_min_T=0.0208333
+#tau_max_T=10
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/iodef.xml
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/iodef.xml	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/iodef.xml	(revision 2330)
@@ -0,0 +1,31 @@
+<?xml version="1.0"?>
+<!-- =========================================================================================================== -->
+<!-- iodef.xml : Configuration file for production of output files using XIOS                                    -->
+<!--             This file contains the context XIOS.                                                            -->
+<!--             The model components context will be add automatically by the comp.driver                       -->
+<!-- =========================================================================================================== -->
+
+<simulation>
+
+  <!-- =========================================================================================================== -->
+  <!-- XIOS context                                                                                                -->
+  <!-- =========================================================================================================== -->
+  <context id="xios">
+    <variable_definition>
+      <variable_group id="buffer">
+            buffer_size = 80000000
+            buffer_server_factor_size = 2
+         </variable_group>
+      <variable_group id="parameters">
+        <variable id="using_server" type="boolean">false</variable>
+        <variable id="info_level" type="int">0</variable>
+      </variable_group>
+    </variable_definition>
+  </context>
+
+
+  <!-- =========================================================================================================== -->
+  <!-- COMPONENT CONTEXT : the model components context will be add automatically by the comp.driver               -->
+
+
+</simulation>
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_CWRR
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_CWRR	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_CWRR	(revision 2330)
@@ -0,0 +1,896 @@
+#
+#**************************************************************************
+#                    Namelist for ORCHIDEE
+#**************************************************************************
+#
+#
+#**************************************************************************
+#          OPTIONS NOT SET
+#**************************************************************************
+#
+#
+#**************************************************************************
+#          Management of display in the run of ORCHIDEE
+#**************************************************************************
+
+# Model chatting level
+# level of online diagnostics in STOMATE (0-4)
+# With this variable, you can determine how much online information STOMATE
+#  gives during the run. 0 means virtually no info.
+BAVARD = 1
+# default = 1
+
+# Flag for debug information
+# This option allows to switch on the output of debug
+#         information without recompiling the code.
+DEBUG_INFO = n
+#default = n
+
+# ORCHIDEE will print more messages
+# This flag permits to print more debug messages in the run.
+LONGPRINT = n
+#default = n
+
+#---------------------------------------------------------------------
+
+# To reset the time coming from SECHIBA restart file
+# This option allows the model to override the time
+#  found in the restart file of SECHIBA with the time
+#  of the first call. That is the restart time of the GCM.
+SECHIBA_reset_time = y
+# default = n
+
+#**************************************************************************
+#          Files : incoming / forcing / restart /output
+#**************************************************************************
+# Ancillary files :
+#---------------------------------------------------------------------
+
+# Name of file from which the vegetation map is to be read
+# If !IMPOSE_VEG
+# If LAND_USE 
+#   default = pft_new.nc
+#   The name of the file to be opened to read a vegetation
+#   map (in pft) is to be given here. 
+# If !LAND_USE
+#   default = ../surfmap/carteveg5km.nc
+#   The name of the file to be opened to read the vegetation
+#   map is to be given here. Usualy SECHIBA runs with a 5kmx5km
+#   map which is derived from the IGBP one. We assume that we have
+#   a classification in 87 types. This is Olson modified by Viovy.
+VEGETATION_FILE = PFTmap.nc
+
+
+# Name of file from which the bare soil albedo
+# If !IMPOSE_AZE
+# The name of the file to be opened to read the soil types from 
+#  which we derive then the bare soil albedos. This file is 1x1 
+#  deg and based on the soil colors defined by Wilson and Henderson-Seller.
+SOILALB_FILE = soils_param.nc
+# default = ../surfmap/soils_param.nc
+
+# Name of file from which soil types are read
+# If !IMPOSE_VEG
+# The name of the file to be opened to read the soil types. 
+#  The data from this file is then interpolated to the grid of
+#  of the model. The aim is to get fractions for sand loam and
+#  clay in each grid box. This information is used for soil hydrology
+#  and respiration.
+#  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE
+SOILTYPE_FILE = soils_param.nc
+SOILCLASS_FILE= soils_param.nc
+# default = ../surfmap/soils_param.nc
+
+# Name of file from which the reference
+# The name of the file to be opened to read
+#  temperature is read
+#  the reference surface temperature.
+#  The data from this file is then interpolated
+#  to the grid of the model.
+#  The aim is to get a reference temperature either
+#  to initialize the corresponding prognostic model
+#  variable correctly (ok_dgvm = TRUE) or to impose it
+#  as boundary condition (ok_dgvm = FALSE)
+REFTEMP_FILE = reftemp.nc
+# default = reftemp.nc
+
+# Name of file containg information about topography.
+TOPOGRAPHY_FILE =cartepente2d_15min.nc
+
+# Input and output restart file for SECHIBA :
+#---------------------------------------------------------------------
+
+# Name of restart to READ for initial conditions
+# This is the name of the file which will be opened
+#  to extract the initial values of all prognostic
+#  values of the model. This has to be a netCDF file.
+#  Not truly COADS compliant. NONE will mean that
+#  no restart file is to be expected.
+SECHIBA_restart_in = _AUTO_
+# default = NONE
+
+# Name of restart files to be created by SECHIBA
+# This variable give the name for the restart files. 
+#  The restart software within IOIPSL will add .nc if needed.
+SECHIBA_rest_out = sechiba_rest_out.nc
+# default = sechiba_rest_out.nc
+
+# Input and output restart file for STOMATE :
+#---------------------------------------------------------------------
+
+# Name of restart to READ for initial conditions of STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened of STOMATE
+#   to extract the initial values of all prognostic values of STOMATE.
+STOMATE_RESTART_FILEIN = _AUTO_
+# default = NONE
+
+# Name of restart files to be created by STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened
+#        to write the final values of all prognostic values
+#        of STOMATE.
+STOMATE_RESTART_FILEOUT = stomate_rest_out.nc
+# default = stomate_restart.nc
+
+# Forcing files for TESTSTOMATE and FORCESOIL
+#---------------------------------------------------------------------
+
+# Name of STOMATE's forcing file
+# Name that will be given to STOMATE's offline forcing file
+#STOMATE_FORCING_NAME = stomate_forcing.nc
+#default = NONE
+
+# Size of STOMATE forcing data in memory (MB)
+# This variable determines how many
+#  forcing states will be kept in memory.
+#  Must be a compromise between memory
+#  use and frequeny of disk access.
+STOMATE_FORCING_MEMSIZE = 50
+# default = 50
+
+# Name of STOMATE's carbon forcing file
+# Name that will be given to STOMATE's carbon offline forcing file
+#STOMATE_CFORCING_NAME = stomate_Cforcing.nc
+# default = NONE
+
+
+# Produced forcing file name (SECHIBA puis STOMATE) :
+#---------------------------------------------------------------------
+
+# ORCHIDEE will write out its forcing to a file
+# This flag allows to write to a file all the variables
+#  which are used to force the land-surface. The file 
+#  has exactly the same format than a normal off-line forcing
+#  and thus this forcing can be used for forcing ORCHIDEE.
+#ORCHIDEE_WATCHOUT = y
+# default = n
+
+# Filenane for the ORCHIDEE forcing file
+# If ORCHIDEE_WATCHOUT
+# This is the name of the file in which the
+#  forcing used here will be written for later use. 
+WATCHOUT_FILE = orchidee_watchout.nc
+# default = orchidee_watchout.nc
+
+# ORCHIDEE will write out with this frequency
+# If ORCHIDEE_WATCHOUT
+# This flag indicates the frequency of the write of the variables. 
+DT_WATCHOUT = 1800
+# default = dt
+
+# STOMATE does minimum service
+# set to TRUE if you want STOMATE to read
+#  and write its start files and keep track
+#  of longer-term biometeorological variables.
+#  This is useful if OK_STOMATE is not set,
+#  but if you intend to activate STOMATE later.
+#  In that case, this run can serve as a 
+#  spinup for longer-term biometeorological
+#  variables.
+#STOMATE_WATCHOUT = y
+# default = n
+
+# Output file name (SECHIBA and STOMATE) :
+#---------------------------------------------------------------------
+# Name of file in which the output is going
+# This file is going to be created by the model
+#  to be written
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+OUTPUT_FILE = sechiba_history.nc
+# default = cabauw_out.nc
+
+# Flag to switch on histfile 2 for SECHIBA (hi-frequency ?)
+# This Flag switch on the second SECHIBA writing for hi (or low) 
+#  frequency writing. This second output is optional and not written
+#  by default.
+SECHIBA_HISTFILE2 = _AUTO_
+# default  = FALSE
+
+# Name of file in which the output number 2 is going
+#   to be written
+# If SECHIBA_HISTFILE2
+# This file is going to be created by the model
+#   and will contain the output 2 from the model.
+SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc
+# default  = sechiba_out_2.nc
+
+# Name of file in which STOMATE's output is going to be written
+# This file is going to be created by the model
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+STOMATE_OUTPUT_FILE = stomate_history.nc
+# default = stomate_history.nc
+
+# Write levels for outputs files (number of variables) :
+#---------------------------------------------------------------------
+
+# SECHIBA history output level (0..10)
+# Chooses the list of variables in the history file. 
+#  Values between 0: nothing is written; 10: everything is 
+#  written are available More details can be found on the web under documentation.
+#  web under documentation.
+SECHIBA_HISTLEVEL = _AUTO_
+# default = 5
+
+# SECHIBA history 2 output level (0..10)
+# If SECHIBA_HISTFILE2
+# Chooses the list of variables in the history file. 
+#   Values between 0: nothing is written; 10: everything is 
+#   written are available More details can be found on the web under documentation.
+#   web under documentation.
+# First level contains all ORCHIDEE outputs.
+SECHIBA_HISTLEVEL2 = _AUTO_
+# default = 1
+
+# STOMATE history output level (0..10)
+#  0: nothing is written; 10: everything is written
+STOMATE_HISTLEVEL = _AUTO_
+# default = 10
+
+#--------------------------------------------------------------------
+# STOMATE_IPCC_OUTPUT_FILE
+# This file is going to be created by the model
+#    and will contain the output from the model.
+#    This file is a truly COADS compliant netCDF file.
+#    It will be generated by the hist software from
+#    the IOIPSL package.
+# Name of file in which STOMATE's output is going
+# to be written
+STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc
+# default = stomate_ipcc_history.nc
+
+# STOMATE_IPCC_HIST_DT
+# Time step of the STOMATE IPCC history file
+# STOMATE IPCC history time step (d)
+STOMATE_IPCC_HIST_DT = -1
+# default = 0.
+
+# Write frequency for output files (SECHIBA in seconds et
+# STOMATE in days) :
+#---------------------------------------------------------------------
+# Frequency in seconds at which to WRITE output
+# This variables gives the frequency the output of
+#  the model should be written into the netCDF file.
+#  It does not affect the frequency at which the
+#  operations such as averaging are done.
+WRITE_STEP = _AUTO_
+# default = 86400.0
+
+# Frequency in seconds at which to WRITE output
+# If SECHIBA_HISTFILE2
+# This variables gives the frequency the output 2 of
+#   the model should be written into the netCDF file.
+#   It does not affect the frequency at which the
+#   operations such as averaging are done.
+#   That is IF the coding of the calls to histdef
+#   are correct !
+WRITE_STEP2 = _AUTO_
+# default = 1800.0
+
+# STOMATE history time step (d)
+# Time step of the STOMATE history file
+# Care : this variable must be higher than DT_SLOW
+STOMATE_HIST_DT = _AUTO_
+# default = 10.
+
+#---------------------------------------------------------------------
+# FORCESOIL CARBON spin up parametrization
+#---------------------------------------------------------------------
+
+# Number of time steps per year for carbon spinup.
+FORCESOIL_STEP_PER_YEAR = 12
+# default = 12
+
+# Number of years saved for carbon spinup.
+FORCESOIL_NB_YEAR = 1
+# default = 1
+
+#---------------------------------------------------------------------
+# Parametrization :
+#---------------------------------------------------------------------
+
+# Activate STOMATE?
+# set to TRUE if STOMATE is to be activated
+# STOMATE_OK_STOMATE=_AUTO_ : will be set to y if stomate component SBG is activated in config.card
+STOMATE_OK_STOMATE = n
+# default = n
+
+# Activate DGVM?
+# set to TRUE if Dynamic Vegetation DGVM is to be activated
+STOMATE_OK_DGVM = n
+# default = n
+
+# Activate CO2?
+# set to TRUE if photosynthesis is to be activated
+STOMATE_OK_CO2 = y
+# default = n
+
+# Flag to force the value of atmospheric CO2 for vegetation.
+# If this flag is set to true, the ATM_CO2 parameter is used
+#  to prescribe the atmospheric CO2.
+# This Flag is only use in couple mode.
+FORCE_CO2_VEG = FALSE
+# default = FALSE
+
+# Value for atm CO2.
+# If FORCE_CO2_VEG (in not forced mode)
+# Value to prescribe the atm CO2.
+#  For pre-industrial simulations, the value is 286.2 .
+#  348. for 1990 year.
+ATM_CO2 = 350.
+# default = 350.
+
+# constant tree mortality
+# If yes, then a constant mortality is applied to trees. 
+#  Otherwise, mortality is a function of the trees' 
+#  vigour (as in LPJ).
+LPJ_GAP_CONST_MORT = y
+# default = y
+
+# no fire allowed
+# With this variable, you can allow or not
+#  the estimation of CO2 lost by fire
+FIRE_DISABLE = n
+# default = n
+
+# Average method for z0
+# If this flag is set to true (y) then the neutral Cdrag
+#  is averaged instead of the log(z0). This should be
+#  the prefered option. We still wish to keep the other
+#  option so we can come back if needed. If this is
+#  desired then one should set Z0CDRAG_AVE = n
+Z0CDRAG_AVE = y
+# default = y
+
+# parameters describing the surface (vegetation + soil) :
+#---------------------------------------------------------------------
+#
+# Should the vegetation be prescribed
+# This flag allows the user to impose a vegetation distribution
+#  and its characterisitcs. It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_VEG = n
+# default = n
+
+# Flag to use old "interpolation" of vegetation map.
+# IF NOT IMPOSE_VEG and NOT LAND_USE
+#  If you want to recover the old (ie orchidee_1_2 branch) 
+#   "interpolation" of vegetation map.
+SLOWPROC_VEGET_OLD_INTERPOL = n
+# default = n
+
+# Vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEG__01 = 0.2
+SECHIBA_VEG__02 = 0.0
+SECHIBA_VEG__03 = 0.0
+SECHIBA_VEG__04 = 0.0
+SECHIBA_VEG__05 = 0.0
+SECHIBA_VEG__06 = 0.0
+SECHIBA_VEG__07 = 0.0
+SECHIBA_VEG__08 = 0.0
+SECHIBA_VEG__09 = 0.0
+SECHIBA_VEG__10 = 0.8
+SECHIBA_VEG__11 = 0.0
+SECHIBA_VEG__12 = 0.0
+SECHIBA_VEG__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+
+# Maximum vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEGMAX__01 = 0.2
+SECHIBA_VEGMAX__02 = 0.0
+SECHIBA_VEGMAX__03 = 0.0
+SECHIBA_VEGMAX__04 = 0.0
+SECHIBA_VEGMAX__05 = 0.0
+SECHIBA_VEGMAX__06 = 0.0
+SECHIBA_VEGMAX__07 = 0.0
+SECHIBA_VEGMAX__08 = 0.0
+SECHIBA_VEGMAX__09 = 0.0
+SECHIBA_VEGMAX__10 = 0.8
+SECHIBA_VEGMAX__11 = 0.0
+SECHIBA_VEGMAX__12 = 0.0
+SECHIBA_VEGMAX__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+
+# LAI for all vegetation types (0-dim mode)
+# If IMPOSE_VEG
+# The maximum LAI used in the 0dim mode. The values should be found
+#  in the restart file. The new values of LAI will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SECHIBA_LAI__01 = 0.
+SECHIBA_LAI__02 = 8.
+SECHIBA_LAI__03 = 8.
+SECHIBA_LAI__04 = 4.
+SECHIBA_LAI__05 = 4.5
+SECHIBA_LAI__06 = 4.5
+SECHIBA_LAI__07 = 4.
+SECHIBA_LAI__08 = 4.5
+SECHIBA_LAI__09 = 4.
+SECHIBA_LAI__10 = 2.
+SECHIBA_LAI__11 = 2.
+SECHIBA_LAI__12 = 2.
+SECHIBA_LAI__13 = 2.
+# default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2.
+
+# Height for all vegetation types (m)
+# If IMPOSE_VEG
+# The height used in the 0dim mode. The values should be found
+#  in the restart file. The new values of height will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SLOWPROC_HEIGHT__01 = 0.
+SLOWPROC_HEIGHT__02 = 50.
+SLOWPROC_HEIGHT__03 = 50.
+SLOWPROC_HEIGHT__04 = 30.
+SLOWPROC_HEIGHT__05 = 30.
+SLOWPROC_HEIGHT__06 = 30.
+SLOWPROC_HEIGHT__07 = 20.
+SLOWPROC_HEIGHT__08 = 20.
+SLOWPROC_HEIGHT__09 = 20.
+SLOWPROC_HEIGHT__10 = .2
+SLOWPROC_HEIGHT__11 = .2
+SLOWPROC_HEIGHT__12 = .4
+SLOWPROC_HEIGHT__13 = .4
+# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0
+
+
+# Fraction of the 3 soil types (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction for the 3 soil types
+#  in the mesh in the following order : sand loam and clay.
+SOIL_FRACTIONS__01 = 0.28
+SOIL_FRACTIONS__02 = 0.52
+SOIL_FRACTIONS__03 = 0.20
+# default = 0.28, 0.52, 0.20
+
+# Fraction of other surface types within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of ice, lakes, etc. is read from the restart file. If
+#  it is not found there we will use the values provided here.
+#  For the moment, there is only ice.
+SECHIBA_FRAC_NOBIO = 0.0
+# default = 0.0
+
+# Fraction of the clay fraction (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction of clay in the grid box.
+CLAY_FRACTION = 0.2
+# default = 0.2
+
+# Should the surface parameters be prescribed
+# This flag allows the user to impose the surface parameters
+#  (Albedo Roughness and Emissivity). It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_AZE = n
+# default = n
+
+# Emissivity of the surface for LW radiation
+# If IMPOSE_AZE
+# The surface emissivity used for compution the LE emission
+#  of the surface in a 0-dim version. Values range between 
+#  0.97 and 1.. The GCM uses 0.98.
+CONDVEG_EMIS = 1.0
+# default = 1.0
+
+# SW visible albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in visible wavelengths to be used 
+#  on the point if a 0-dim version of SECHIBA is used. 
+#  Look at the description of the forcing data for 
+#  the correct value.
+CONDVEG_ALBVIS = 0.25
+# default = 0.25
+
+# SW near infrared albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in near infrared wavelengths to be used 
+#  on the point if a 0-dim version of SECHIBA is used. 
+#  Look at the description of the forcing data for 
+#  the correct value.
+CONDVEG_ALBNIR = 0.25
+# default = 0.25
+
+# Surface roughness (m)
+# If IMPOSE_AZE
+# Surface rougness to be used on the point if a 0-dim version
+#  of SECHIBA is used. Look at the description of the forcing  
+#  data for the correct value.
+CONDVEG_Z0 = 0.15
+# default = 0.15_stnd
+
+# Height to be added to the height of the first level (m)
+# If IMPOSE_AZE
+# ORCHIDEE assumes that the atmospheric level height is counted
+#  from the zero wind level. Thus to take into account the roughness
+#  of tall vegetation we need to correct this by a certain fraction
+#  of the vegetation height. This is called the roughness height in
+#  ORCHIDEE talk.
+ROUGHHEIGHT = 0.0
+# default = 0.0
+
+# The snow albedo used by SECHIBA
+# This option allows the user to impose a snow albedo.
+#  Default behaviour is to use the model of snow albedo
+#  developed by Chalita (1993).
+CONDVEG_SNOWA = default
+# default = use the model of snow albedo developed by Chalita
+
+# Switch bare soil albedo dependent (if TRUE) on soil wetness
+# If TRUE, the model for bare soil albedo is the old formulation.
+#  Then it depend on the soil dry or wetness. If FALSE, it is the 
+#  new computation that is taken, it is only function of soil color.
+ALB_BARE_MODEL = FALSE
+# default = FALSE
+
+# Initial snow mass if not found in restart
+# The initial value of snow mass if its value is not found
+#   in the restart file. This should only be used if the model is 
+#   started without a restart file.
+HYDROL_SNOW = 0.0
+# default = 0.0
+
+
+# Initial snow age if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOWAGE = 0.0
+# default = 0.0
+
+# Initial snow amount on ice, lakes, etc. if not found in restart
+# The initial value of snow if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOW_NOBIO = 0.0
+# default = 0.0
+
+# Initial snow age on ice, lakes, etc. if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOW_NOBIO_AGE = 0.0
+# default = 0.0
+
+# Initial soil moisture stress if not found in restart
+# The initial value of soil moisture stress if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_HUMR = 1.0
+# default = 1.0
+
+# Total depth of soil reservoir
+HYDROL_SOIL_DEPTH = 2.
+# default = 2.
+
+# Root profile
+# Default values were defined for 2 meters soil depth.
+# For 4 meters soil depth, you may use those ones :
+# 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+HYDROL_HUMCSTE= 5.0, 0.8, 0.8, 1.0, 0.8, 0.8, 1.0, 1.0, 0.8, 4.0, 4.0, 4.0, 4.0 
+# default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4.
+
+# Initial restart deep soil moisture if not found in restart
+# The initial value of deep soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file. Default behaviour is a saturated soil.
+HYDROL_BQSB = default
+# default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2
+
+# Initial upper soil moisture if not found in restart
+# The initial value of upper soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_GQSB = 0.0
+# default = 0.0
+
+# Initial upper reservoir depth if not found in restart
+# The initial value of upper reservoir depth if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_DSG = 0.0
+# default = 0.0
+
+# Initial dry soil above upper reservoir if not found in restart
+# The initial value of dry soil above upper reservoir if its value 
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file. The default behaviour
+#  is to compute it from the variables above. Should be OK most of 
+#  the time.
+HYDROL_DSP = default
+# default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0
+
+# Initial water on canopy if not found in restart
+# The initial value of moisture on canopy if its value 
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_QSV = 0.0
+# default = 0.0
+
+# Soil moisture on each soil tile and levels
+# The initial value of mc if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_MOISTURE_CONTENT = 0.3
+# default = 0.3
+
+# US_NVM_NSTM_NSLM
+# The initial value of us (relative moisture) if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+US_INIT = 0.0
+# default = 0.0
+
+# Coefficient for free drainage at bottom
+# The initial value of free drainage if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+FREE_DRAIN_COEF = 1.0, 1.0, 1.0
+# default = 1.0, 1.0, 1.0
+
+# Bare soil evap on each soil if not found in restart
+# The initial value of bare soils evap if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+EVAPNU_SOIL = 0.0
+# default = 0.0
+
+# Initial temperature if not found in restart
+# The initial value of surface temperature if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+ENERBIL_TSURF = 280.
+# default = 280.
+
+# Initial Soil Potential Evaporation
+# The initial value of soil potential evaporation if its value 
+#  is not found in the restart file. This should only be used if
+#  the model is started without a restart file. 
+ENERBIL_EVAPOT = 0.0
+# default = 0.0
+
+# Initial soil temperature profile if not found in restart
+# The initial value of the temperature profile in the soil if 
+#   its value is not found in the restart file. This should only 
+#   be used if the model is started without a restart file. Here
+#   we only require one value as we will assume a constant 
+#   throughout the column.
+THERMOSOIL_TPRO = 280.
+# default = 280.
+
+# Initial leaf CO2 level if not found in restart
+# The initial value of leaf_ci if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+DIFFUCO_LEAFCI = 233.
+# default = 233.
+
+
+# Keep cdrag coefficient from gcm.
+# Set to .TRUE. if you want q_cdrag coming from GCM.
+#  Keep cdrag coefficient from gcm for latent and sensible heat fluxes.
+#  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs).
+CDRAG_FROM_GCM = y
+# default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE.
+
+
+# Artificial parameter to increase or decrease canopy resistance
+# Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin
+# By PFT.
+RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
+# default = 1.
+
+
+# Interception reservoir coefficient.
+# Transforms leaf area index into size of interception reservoir
+#  for slowproc_derivvar or stomate.
+SECHIBA_QSINT = 0.02
+# default = 0.1
+
+#**************************************************************************
+# LAND_USE
+#**************************************************************************
+
+# Read a land_use vegetation map
+# pft values are needed, max time axis is 293
+LAND_USE = y
+# default = n
+
+# Year of the land_use vegetation map readed
+# year off the pft map
+# If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc) 
+VEGET_YEAR = 1
+# default = 282
+
+# booleen to indicate that a new LAND USE file will be used (since 1.9.5 version).
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+VEGET_REINIT = n
+# default = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update each this time step.
+# If LAND_USE
+VEGET_UPDATE = _AUTO_
+# default = 1Y
+
+# treat land use modifications
+# With this variable, you can use a Land Use map
+# to simulate anthropic modifications such as   
+# deforestation.                                
+# If LAND_USE
+LAND_COVER_CHANGE = _AUTO_
+# default = y
+
+#**************************************************************************
+
+# agriculture allowed?
+# With this variable, you can determine
+#  whether agriculture is allowed
+AGRICULTURE = y
+# default = y
+
+# Harvert model for agricol PFTs.
+# Compute harvest above ground biomass for agriculture.
+# Change daily turnover.
+HARVEST_AGRI = y
+# default = y
+
+# herbivores allowed?
+# With this variable, you can activate herbivores 
+HERBIVORES = n
+# default = n
+
+# treat expansion of PFTs across a grid cell?
+# With this variable, you can determine
+#  whether we treat expansion of PFTs across a
+#  grid cell.
+TREAT_EXPANSION = n
+# default = n
+
+#**************************************************************************
+
+# Time within the day simulated
+# This is the time spent simulating the current day. This variable is
+#  prognostic as it will trigger all the computations which are
+#  only done once a day.
+SECHIBA_DAY = 0.0
+# default = 0.0
+
+# Time step of STOMATE and other slow processes
+# Time step (s) of regular update of vegetation
+#  cover, LAI etc. This is also the time step
+#  of STOMATE.
+DT_SLOW = 86400.
+# default = un_jour = 86400.
+
+#**************************************************************************
+
+# Allows to switch on the multilayer hydrology of CWRR
+# This flag allows the user to decide if the vertical
+#  hydrology should be treated using the multi-layer 
+#  diffusion scheme adapted from CWRR by Patricia de Rosnay.
+#  by default the Choisnel hydrology is used.
+HYDROL_CWRR = y 
+# default = n
+
+# do horizontal diffusion?
+# If TRUE, then water can diffuse horizontally between
+#  the PFTs' water reservoirs.
+HYDROL_OK_HDIFF = n
+# default = n
+ 
+
+# time scale (s) for horizontal diffusion of water
+# If HYDROL_OK_HDIFF
+# Defines how fast diffusion occurs horizontally between
+#  the individual PFTs' water reservoirs. If infinite, no
+#  diffusion.
+HYDROL_TAU_HDIFF = 1800.
+# default = 86400.
+
+# Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8).
+# During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall
+#  will get directly to the ground without being intercepted, for each PFT..
+PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+# default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+
+# Decides if we route the water or not
+# This flag allows the user to decide if the runoff
+#  and drainage should be routed to the ocean
+#  and to downstream grid boxes.
+RIVER_ROUTING = y
+# default = n
+
+# Name of file which contains the routing information
+# The file provided here should allow the routing module to
+#  read the high resolution grid of basins and the flow direction 
+#  from one mesh to the other.
+ROUTING_FILE = routing.nc
+# default = routing.nc
+
+# Time step of the routing scheme
+# If RIVER_ROUTING
+# This values gives the time step in seconds of the routing scheme. 
+#   It should be multiple of the main time step of ORCHIDEE. One day
+#   is a good value.
+ROUTING_TIMESTEP = 86400
+# default = 86400
+
+# Number of rivers 
+# If RIVER_ROUTING
+# This parameter chooses the number of largest river basins
+#  which should be treated as independently as rivers and not
+#  flow into the oceans as diffusion coastal flow.
+ROUTING_RIVERS = 50
+# default = 50
+
+# Should we compute an irrigation flux 
+# This parameters allows the user to ask the model
+#  to compute an irigation flux. This performed for the
+#  on very simple hypothesis. The idea is to have a good
+#  map of irrigated areas and a simple function which estimates
+#  the need to irrigate.
+DO_IRRIGATION = n
+# default = n
+
+# Name of file which contains the map of irrigated areas
+# If IRRIGATE
+# The name of the file to be opened to read the field
+#  with the area in m^2 of the area irrigated within each
+#  0.5 0.5 deg grid box. The map currently used is the one
+#  developed by the Center for Environmental Systems Research 
+#  in Kassel (1995).
+IRRIGATION_FILE = irrigated.nc
+# default = irrigated.nc
+
+# Should we include floodplains 
+# This parameters allows the user to ask the model
+#  to take into account the flood plains and return 
+#  the water into the soil moisture. It then can go 
+#  back to the atmopshere. This tried to simulate 
+#  internal deltas of rivers.
+DO_FLOODPLAINS = n
+# default = n
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK=y
+#**************************************************************************
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_Choi
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_Choi	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/orchidee.def_Choi	(revision 2330)
@@ -0,0 +1,896 @@
+#
+#**************************************************************************
+#                    Namelist for ORCHIDEE
+#**************************************************************************
+#
+#
+#**************************************************************************
+#          OPTIONS NOT SET
+#**************************************************************************
+#
+#
+#**************************************************************************
+#          Management of display in the run of ORCHIDEE
+#**************************************************************************
+
+# Model chatting level
+# level of online diagnostics in STOMATE (0-4)
+# With this variable, you can determine how much online information STOMATE
+#  gives during the run. 0 means virtually no info.
+BAVARD = 1
+# default = 1
+
+# Flag for debug information
+# This option allows to switch on the output of debug
+#         information without recompiling the code.
+DEBUG_INFO = n
+#default = n
+
+# ORCHIDEE will print more messages
+# This flag permits to print more debug messages in the run.
+LONGPRINT = n
+#default = n
+
+#---------------------------------------------------------------------
+
+# To reset the time coming from SECHIBA restart file
+# This option allows the model to override the time
+#  found in the restart file of SECHIBA with the time
+#  of the first call. That is the restart time of the GCM.
+SECHIBA_reset_time = y
+# default = n
+
+#**************************************************************************
+#          Files : incoming / forcing / restart /output
+#**************************************************************************
+# Ancillary files :
+#---------------------------------------------------------------------
+
+# Name of file from which the vegetation map is to be read
+# If !IMPOSE_VEG
+# If LAND_USE 
+#   default = pft_new.nc
+#   The name of the file to be opened to read a vegetation
+#   map (in pft) is to be given here. 
+# If !LAND_USE
+#   default = ../surfmap/carteveg5km.nc
+#   The name of the file to be opened to read the vegetation
+#   map is to be given here. Usualy SECHIBA runs with a 5kmx5km
+#   map which is derived from the IGBP one. We assume that we have
+#   a classification in 87 types. This is Olson modified by Viovy.
+VEGETATION_FILE = PFTmap.nc
+
+
+# Name of file from which the bare soil albedo
+# If !IMPOSE_AZE
+# The name of the file to be opened to read the soil types from 
+#  which we derive then the bare soil albedos. This file is 1x1 
+#  deg and based on the soil colors defined by Wilson and Henderson-Seller.
+SOILALB_FILE = soils_param.nc
+# default = ../surfmap/soils_param.nc
+
+# Name of file from which soil types are read
+# If !IMPOSE_VEG
+# The name of the file to be opened to read the soil types. 
+#  The data from this file is then interpolated to the grid of
+#  of the model. The aim is to get fractions for sand loam and
+#  clay in each grid box. This information is used for soil hydrology
+#  and respiration.
+#  This parameter change name in newer ORCHIDEE versions; SOILTYPE_FILE=>SOILCLASS_FILE
+SOILTYPE_FILE = soils_param.nc
+SOILCLASS_FILE= soils_param.nc
+# default = ../surfmap/soils_param.nc
+
+# Name of file from which the reference
+# The name of the file to be opened to read
+#  temperature is read
+#  the reference surface temperature.
+#  The data from this file is then interpolated
+#  to the grid of the model.
+#  The aim is to get a reference temperature either
+#  to initialize the corresponding prognostic model
+#  variable correctly (ok_dgvm = TRUE) or to impose it
+#  as boundary condition (ok_dgvm = FALSE)
+REFTEMP_FILE = reftemp.nc
+# default = reftemp.nc
+
+# Name of file containg information about topography.
+TOPOGRAPHY_FILE =cartepente2d_15min.nc
+
+# Input and output restart file for SECHIBA :
+#---------------------------------------------------------------------
+
+# Name of restart to READ for initial conditions
+# This is the name of the file which will be opened
+#  to extract the initial values of all prognostic
+#  values of the model. This has to be a netCDF file.
+#  Not truly COADS compliant. NONE will mean that
+#  no restart file is to be expected.
+SECHIBA_restart_in = _AUTO_
+# default = NONE
+
+# Name of restart files to be created by SECHIBA
+# This variable give the name for the restart files. 
+#  The restart software within IOIPSL will add .nc if needed.
+SECHIBA_rest_out = sechiba_rest_out.nc
+# default = sechiba_rest_out.nc
+
+# Input and output restart file for STOMATE :
+#---------------------------------------------------------------------
+
+# Name of restart to READ for initial conditions of STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened of STOMATE
+#   to extract the initial values of all prognostic values of STOMATE.
+STOMATE_RESTART_FILEIN = _AUTO_
+# default = NONE
+
+# Name of restart files to be created by STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened
+#        to write the final values of all prognostic values
+#        of STOMATE.
+STOMATE_RESTART_FILEOUT = stomate_rest_out.nc
+# default = stomate_restart.nc
+
+# Forcing files for TESTSTOMATE and FORCESOIL
+#---------------------------------------------------------------------
+
+# Name of STOMATE's forcing file
+# Name that will be given to STOMATE's offline forcing file
+#STOMATE_FORCING_NAME = stomate_forcing.nc
+#default = NONE
+
+# Size of STOMATE forcing data in memory (MB)
+# This variable determines how many
+#  forcing states will be kept in memory.
+#  Must be a compromise between memory
+#  use and frequeny of disk access.
+STOMATE_FORCING_MEMSIZE = 50
+# default = 50
+
+# Name of STOMATE's carbon forcing file
+# Name that will be given to STOMATE's carbon offline forcing file
+#STOMATE_CFORCING_NAME = stomate_Cforcing.nc
+# default = NONE
+
+
+# Produced forcing file name (SECHIBA puis STOMATE) :
+#---------------------------------------------------------------------
+
+# ORCHIDEE will write out its forcing to a file
+# This flag allows to write to a file all the variables
+#  which are used to force the land-surface. The file 
+#  has exactly the same format than a normal off-line forcing
+#  and thus this forcing can be used for forcing ORCHIDEE.
+#ORCHIDEE_WATCHOUT = y
+# default = n
+
+# Filenane for the ORCHIDEE forcing file
+# If ORCHIDEE_WATCHOUT
+# This is the name of the file in which the
+#  forcing used here will be written for later use. 
+WATCHOUT_FILE = orchidee_watchout.nc
+# default = orchidee_watchout.nc
+
+# ORCHIDEE will write out with this frequency
+# If ORCHIDEE_WATCHOUT
+# This flag indicates the frequency of the write of the variables. 
+DT_WATCHOUT = 1800
+# default = dt
+
+# STOMATE does minimum service
+# set to TRUE if you want STOMATE to read
+#  and write its start files and keep track
+#  of longer-term biometeorological variables.
+#  This is useful if OK_STOMATE is not set,
+#  but if you intend to activate STOMATE later.
+#  In that case, this run can serve as a 
+#  spinup for longer-term biometeorological
+#  variables.
+#STOMATE_WATCHOUT = y
+# default = n
+
+# Output file name (SECHIBA and STOMATE) :
+#---------------------------------------------------------------------
+# Name of file in which the output is going
+# This file is going to be created by the model
+#  to be written
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+OUTPUT_FILE = sechiba_history.nc
+# default = cabauw_out.nc
+
+# Flag to switch on histfile 2 for SECHIBA (hi-frequency ?)
+# This Flag switch on the second SECHIBA writing for hi (or low) 
+#  frequency writing. This second output is optional and not written
+#  by default.
+SECHIBA_HISTFILE2 = _AUTO_
+# default  = FALSE
+
+# Name of file in which the output number 2 is going
+#   to be written
+# If SECHIBA_HISTFILE2
+# This file is going to be created by the model
+#   and will contain the output 2 from the model.
+SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc
+# default  = sechiba_out_2.nc
+
+# Name of file in which STOMATE's output is going to be written
+# This file is going to be created by the model
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+STOMATE_OUTPUT_FILE = stomate_history.nc
+# default = stomate_history.nc
+
+# Write levels for outputs files (number of variables) :
+#---------------------------------------------------------------------
+
+# SECHIBA history output level (0..10)
+# Chooses the list of variables in the history file. 
+#  Values between 0: nothing is written; 10: everything is 
+#  written are available More details can be found on the web under documentation.
+#  web under documentation.
+SECHIBA_HISTLEVEL = _AUTO_
+# default = 5
+
+# SECHIBA history 2 output level (0..10)
+# If SECHIBA_HISTFILE2
+# Chooses the list of variables in the history file. 
+#   Values between 0: nothing is written; 10: everything is 
+#   written are available More details can be found on the web under documentation.
+#   web under documentation.
+# First level contains all ORCHIDEE outputs.
+SECHIBA_HISTLEVEL2 = _AUTO_
+# default = 1
+
+# STOMATE history output level (0..10)
+#  0: nothing is written; 10: everything is written
+STOMATE_HISTLEVEL = _AUTO_
+# default = 10
+
+#--------------------------------------------------------------------
+# STOMATE_IPCC_OUTPUT_FILE
+# This file is going to be created by the model
+#    and will contain the output from the model.
+#    This file is a truly COADS compliant netCDF file.
+#    It will be generated by the hist software from
+#    the IOIPSL package.
+# Name of file in which STOMATE's output is going
+# to be written
+STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc
+# default = stomate_ipcc_history.nc
+
+# STOMATE_IPCC_HIST_DT
+# Time step of the STOMATE IPCC history file
+# STOMATE IPCC history time step (d)
+STOMATE_IPCC_HIST_DT = -1
+# default = 0.
+
+# Write frequency for output files (SECHIBA in seconds et
+# STOMATE in days) :
+#---------------------------------------------------------------------
+# Frequency in seconds at which to WRITE output
+# This variables gives the frequency the output of
+#  the model should be written into the netCDF file.
+#  It does not affect the frequency at which the
+#  operations such as averaging are done.
+WRITE_STEP = _AUTO_
+# default = 86400.0
+
+# Frequency in seconds at which to WRITE output
+# If SECHIBA_HISTFILE2
+# This variables gives the frequency the output 2 of
+#   the model should be written into the netCDF file.
+#   It does not affect the frequency at which the
+#   operations such as averaging are done.
+#   That is IF the coding of the calls to histdef
+#   are correct !
+WRITE_STEP2 = _AUTO_
+# default = 1800.0
+
+# STOMATE history time step (d)
+# Time step of the STOMATE history file
+# Care : this variable must be higher than DT_SLOW
+STOMATE_HIST_DT = _AUTO_
+# default = 10.
+
+#---------------------------------------------------------------------
+# FORCESOIL CARBON spin up parametrization
+#---------------------------------------------------------------------
+
+# Number of time steps per year for carbon spinup.
+FORCESOIL_STEP_PER_YEAR = 12
+# default = 12
+
+# Number of years saved for carbon spinup.
+FORCESOIL_NB_YEAR = 1
+# default = 1
+
+#---------------------------------------------------------------------
+# Parametrization :
+#---------------------------------------------------------------------
+
+# Activate STOMATE?
+# set to TRUE if STOMATE is to be activated
+# STOMATE_OK_STOMATE=_AUTO_ : will be set to y if stomate component SBG is activated in config.card
+STOMATE_OK_STOMATE = n
+# default = n
+
+# Activate DGVM?
+# set to TRUE if Dynamic Vegetation DGVM is to be activated
+STOMATE_OK_DGVM = n
+# default = n
+
+# Activate CO2?
+# set to TRUE if photosynthesis is to be activated
+STOMATE_OK_CO2 = y
+# default = n
+
+# Flag to force the value of atmospheric CO2 for vegetation.
+# If this flag is set to true, the ATM_CO2 parameter is used
+#  to prescribe the atmospheric CO2.
+# This Flag is only use in couple mode.
+FORCE_CO2_VEG = FALSE
+# default = FALSE
+
+# Value for atm CO2.
+# If FORCE_CO2_VEG (in not forced mode)
+# Value to prescribe the atm CO2.
+#  For pre-industrial simulations, the value is 286.2 .
+#  348. for 1990 year.
+ATM_CO2 = 350.
+# default = 350.
+
+# constant tree mortality
+# If yes, then a constant mortality is applied to trees. 
+#  Otherwise, mortality is a function of the trees' 
+#  vigour (as in LPJ).
+LPJ_GAP_CONST_MORT = y
+# default = y
+
+# no fire allowed
+# With this variable, you can allow or not
+#  the estimation of CO2 lost by fire
+FIRE_DISABLE = n
+# default = n
+
+# Average method for z0
+# If this flag is set to true (y) then the neutral Cdrag
+#  is averaged instead of the log(z0). This should be
+#  the prefered option. We still wish to keep the other
+#  option so we can come back if needed. If this is
+#  desired then one should set Z0CDRAG_AVE = n
+Z0CDRAG_AVE = y
+# default = y
+
+# parameters describing the surface (vegetation + soil) :
+#---------------------------------------------------------------------
+#
+# Should the vegetation be prescribed
+# This flag allows the user to impose a vegetation distribution
+#  and its characterisitcs. It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_VEG = n
+# default = n
+
+# Flag to use old "interpolation" of vegetation map.
+# IF NOT IMPOSE_VEG and NOT LAND_USE
+#  If you want to recover the old (ie orchidee_1_2 branch) 
+#   "interpolation" of vegetation map.
+SLOWPROC_VEGET_OLD_INTERPOL = n
+# default = n
+
+# Vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEG__01 = 0.2
+SECHIBA_VEG__02 = 0.0
+SECHIBA_VEG__03 = 0.0
+SECHIBA_VEG__04 = 0.0
+SECHIBA_VEG__05 = 0.0
+SECHIBA_VEG__06 = 0.0
+SECHIBA_VEG__07 = 0.0
+SECHIBA_VEG__08 = 0.0
+SECHIBA_VEG__09 = 0.0
+SECHIBA_VEG__10 = 0.8
+SECHIBA_VEG__11 = 0.0
+SECHIBA_VEG__12 = 0.0
+SECHIBA_VEG__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+
+# Maximum vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEGMAX__01 = 0.2
+SECHIBA_VEGMAX__02 = 0.0
+SECHIBA_VEGMAX__03 = 0.0
+SECHIBA_VEGMAX__04 = 0.0
+SECHIBA_VEGMAX__05 = 0.0
+SECHIBA_VEGMAX__06 = 0.0
+SECHIBA_VEGMAX__07 = 0.0
+SECHIBA_VEGMAX__08 = 0.0
+SECHIBA_VEGMAX__09 = 0.0
+SECHIBA_VEGMAX__10 = 0.8
+SECHIBA_VEGMAX__11 = 0.0
+SECHIBA_VEGMAX__12 = 0.0
+SECHIBA_VEGMAX__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+
+# LAI for all vegetation types (0-dim mode)
+# If IMPOSE_VEG
+# The maximum LAI used in the 0dim mode. The values should be found
+#  in the restart file. The new values of LAI will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SECHIBA_LAI__01 = 0.
+SECHIBA_LAI__02 = 8.
+SECHIBA_LAI__03 = 8.
+SECHIBA_LAI__04 = 4.
+SECHIBA_LAI__05 = 4.5
+SECHIBA_LAI__06 = 4.5
+SECHIBA_LAI__07 = 4.
+SECHIBA_LAI__08 = 4.5
+SECHIBA_LAI__09 = 4.
+SECHIBA_LAI__10 = 2.
+SECHIBA_LAI__11 = 2.
+SECHIBA_LAI__12 = 2.
+SECHIBA_LAI__13 = 2.
+# default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2.
+
+# Height for all vegetation types (m)
+# If IMPOSE_VEG
+# The height used in the 0dim mode. The values should be found
+#  in the restart file. The new values of height will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SLOWPROC_HEIGHT__01 = 0.
+SLOWPROC_HEIGHT__02 = 50.
+SLOWPROC_HEIGHT__03 = 50.
+SLOWPROC_HEIGHT__04 = 30.
+SLOWPROC_HEIGHT__05 = 30.
+SLOWPROC_HEIGHT__06 = 30.
+SLOWPROC_HEIGHT__07 = 20.
+SLOWPROC_HEIGHT__08 = 20.
+SLOWPROC_HEIGHT__09 = 20.
+SLOWPROC_HEIGHT__10 = .2
+SLOWPROC_HEIGHT__11 = .2
+SLOWPROC_HEIGHT__12 = .4
+SLOWPROC_HEIGHT__13 = .4
+# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0
+
+
+# Fraction of the 3 soil types (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction for the 3 soil types
+#  in the mesh in the following order : sand loam and clay.
+SOIL_FRACTIONS__01 = 0.28
+SOIL_FRACTIONS__02 = 0.52
+SOIL_FRACTIONS__03 = 0.20
+# default = 0.28, 0.52, 0.20
+
+# Fraction of other surface types within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of ice, lakes, etc. is read from the restart file. If
+#  it is not found there we will use the values provided here.
+#  For the moment, there is only ice.
+SECHIBA_FRAC_NOBIO = 0.0
+# default = 0.0
+
+# Fraction of the clay fraction (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction of clay in the grid box.
+CLAY_FRACTION = 0.2
+# default = 0.2
+
+# Should the surface parameters be prescribed
+# This flag allows the user to impose the surface parameters
+#  (Albedo Roughness and Emissivity). It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_AZE = n
+# default = n
+
+# Emissivity of the surface for LW radiation
+# If IMPOSE_AZE
+# The surface emissivity used for compution the LE emission
+#  of the surface in a 0-dim version. Values range between 
+#  0.97 and 1.. The GCM uses 0.98.
+CONDVEG_EMIS = 1.0
+# default = 1.0
+
+# SW visible albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in visible wavelengths to be used 
+#  on the point if a 0-dim version of SECHIBA is used. 
+#  Look at the description of the forcing data for 
+#  the correct value.
+CONDVEG_ALBVIS = 0.25
+# default = 0.25
+
+# SW near infrared albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in near infrared wavelengths to be used 
+#  on the point if a 0-dim version of SECHIBA is used. 
+#  Look at the description of the forcing data for 
+#  the correct value.
+CONDVEG_ALBNIR = 0.25
+# default = 0.25
+
+# Surface roughness (m)
+# If IMPOSE_AZE
+# Surface rougness to be used on the point if a 0-dim version
+#  of SECHIBA is used. Look at the description of the forcing  
+#  data for the correct value.
+CONDVEG_Z0 = 0.15
+# default = 0.15_stnd
+
+# Height to be added to the height of the first level (m)
+# If IMPOSE_AZE
+# ORCHIDEE assumes that the atmospheric level height is counted
+#  from the zero wind level. Thus to take into account the roughness
+#  of tall vegetation we need to correct this by a certain fraction
+#  of the vegetation height. This is called the roughness height in
+#  ORCHIDEE talk.
+ROUGHHEIGHT = 0.0
+# default = 0.0
+
+# The snow albedo used by SECHIBA
+# This option allows the user to impose a snow albedo.
+#  Default behaviour is to use the model of snow albedo
+#  developed by Chalita (1993).
+CONDVEG_SNOWA = default
+# default = use the model of snow albedo developed by Chalita
+
+# Switch bare soil albedo dependent (if TRUE) on soil wetness
+# If TRUE, the model for bare soil albedo is the old formulation.
+#  Then it depend on the soil dry or wetness. If FALSE, it is the 
+#  new computation that is taken, it is only function of soil color.
+ALB_BARE_MODEL = FALSE
+# default = FALSE
+
+# Initial snow mass if not found in restart
+# The initial value of snow mass if its value is not found
+#   in the restart file. This should only be used if the model is 
+#   started without a restart file.
+HYDROL_SNOW = 0.0
+# default = 0.0
+
+
+# Initial snow age if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOWAGE = 0.0
+# default = 0.0
+
+# Initial snow amount on ice, lakes, etc. if not found in restart
+# The initial value of snow if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOW_NOBIO = 0.0
+# default = 0.0
+
+# Initial snow age on ice, lakes, etc. if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOW_NOBIO_AGE = 0.0
+# default = 0.0
+
+# Initial soil moisture stress if not found in restart
+# The initial value of soil moisture stress if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_HUMR = 1.0
+# default = 1.0
+
+# Total depth of soil reservoir
+HYDROL_SOIL_DEPTH = 4.
+# default = 2.
+
+# Root profile
+# Default values were defined for 2 meters soil depth.
+# For 4 meters soil depth, you may use those ones :
+# 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+# default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4.
+
+# Initial restart deep soil moisture if not found in restart
+# The initial value of deep soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file. Default behaviour is a saturated soil.
+HYDROL_BQSB = default
+# default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2
+
+# Initial upper soil moisture if not found in restart
+# The initial value of upper soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_GQSB = 0.0
+# default = 0.0
+
+# Initial upper reservoir depth if not found in restart
+# The initial value of upper reservoir depth if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_DSG = 0.0
+# default = 0.0
+
+# Initial dry soil above upper reservoir if not found in restart
+# The initial value of dry soil above upper reservoir if its value 
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file. The default behaviour
+#  is to compute it from the variables above. Should be OK most of 
+#  the time.
+HYDROL_DSP = default
+# default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0
+
+# Initial water on canopy if not found in restart
+# The initial value of moisture on canopy if its value 
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_QSV = 0.0
+# default = 0.0
+
+# Soil moisture on each soil tile and levels
+# The initial value of mc if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_MOISTURE_CONTENT = 0.3
+# default = 0.3
+
+# US_NVM_NSTM_NSLM
+# The initial value of us (relative moisture) if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+US_INIT = 0.0
+# default = 0.0
+
+# Coefficient for free drainage at bottom
+# The initial value of free drainage if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+FREE_DRAIN_COEF = 1.0, 1.0, 1.0
+# default = 1.0, 1.0, 1.0
+
+# Bare soil evap on each soil if not found in restart
+# The initial value of bare soils evap if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+EVAPNU_SOIL = 0.0
+# default = 0.0
+
+# Initial temperature if not found in restart
+# The initial value of surface temperature if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+ENERBIL_TSURF = 280.
+# default = 280.
+
+# Initial Soil Potential Evaporation
+# The initial value of soil potential evaporation if its value 
+#  is not found in the restart file. This should only be used if
+#  the model is started without a restart file. 
+ENERBIL_EVAPOT = 0.0
+# default = 0.0
+
+# Initial soil temperature profile if not found in restart
+# The initial value of the temperature profile in the soil if 
+#   its value is not found in the restart file. This should only 
+#   be used if the model is started without a restart file. Here
+#   we only require one value as we will assume a constant 
+#   throughout the column.
+THERMOSOIL_TPRO = 280.
+# default = 280.
+
+# Initial leaf CO2 level if not found in restart
+# The initial value of leaf_ci if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+DIFFUCO_LEAFCI = 233.
+# default = 233.
+
+
+# Keep cdrag coefficient from gcm.
+# Set to .TRUE. if you want q_cdrag coming from GCM.
+#  Keep cdrag coefficient from gcm for latent and sensible heat fluxes.
+#  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs).
+CDRAG_FROM_GCM = y
+# default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE.
+
+
+# Artificial parameter to increase or decrease canopy resistance
+# Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin
+# By PFT.
+RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
+# default = 1.
+
+
+# Interception reservoir coefficient.
+# Transforms leaf area index into size of interception reservoir
+#  for slowproc_derivvar or stomate.
+SECHIBA_QSINT = 0.02
+# default = 0.1
+
+#**************************************************************************
+# LAND_USE
+#**************************************************************************
+
+# Read a land_use vegetation map
+# pft values are needed, max time axis is 293
+LAND_USE = y
+# default = n
+
+# Year of the land_use vegetation map readed
+# year off the pft map
+# If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc) 
+VEGET_YEAR = 1
+# default = 282
+
+# booleen to indicate that a new LAND USE file will be used (since 1.9.5 version).
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+VEGET_REINIT = n
+# default = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update each this time step.
+# If LAND_USE
+VEGET_UPDATE = _AUTO_
+# default = 1Y
+
+# treat land use modifications
+# With this variable, you can use a Land Use map
+# to simulate anthropic modifications such as   
+# deforestation.                                
+# If LAND_USE
+LAND_COVER_CHANGE = _AUTO_
+# default = y
+
+#**************************************************************************
+
+# agriculture allowed?
+# With this variable, you can determine
+#  whether agriculture is allowed
+AGRICULTURE = y
+# default = y
+
+# Harvert model for agricol PFTs.
+# Compute harvest above ground biomass for agriculture.
+# Change daily turnover.
+HARVEST_AGRI = y
+# default = y
+
+# herbivores allowed?
+# With this variable, you can activate herbivores 
+HERBIVORES = n
+# default = n
+
+# treat expansion of PFTs across a grid cell?
+# With this variable, you can determine
+#  whether we treat expansion of PFTs across a
+#  grid cell.
+TREAT_EXPANSION = n
+# default = n
+
+#**************************************************************************
+
+# Time within the day simulated
+# This is the time spent simulating the current day. This variable is
+#  prognostic as it will trigger all the computations which are
+#  only done once a day.
+SECHIBA_DAY = 0.0
+# default = 0.0
+
+# Time step of STOMATE and other slow processes
+# Time step (s) of regular update of vegetation
+#  cover, LAI etc. This is also the time step
+#  of STOMATE.
+DT_SLOW = 86400.
+# default = un_jour = 86400.
+
+#**************************************************************************
+
+# Allows to switch on the multilayer hydrology of CWRR
+# This flag allows the user to decide if the vertical
+#  hydrology should be treated using the multi-layer 
+#  diffusion scheme adapted from CWRR by Patricia de Rosnay.
+#  by default the Choisnel hydrology is used.
+HYDROL_CWRR = n 
+# default = n
+
+# do horizontal diffusion?
+# If TRUE, then water can diffuse horizontally between
+#  the PFTs' water reservoirs.
+HYDROL_OK_HDIFF = n
+# default = n
+ 
+
+# time scale (s) for horizontal diffusion of water
+# If HYDROL_OK_HDIFF
+# Defines how fast diffusion occurs horizontally between
+#  the individual PFTs' water reservoirs. If infinite, no
+#  diffusion.
+HYDROL_TAU_HDIFF = 1800.
+# default = 86400.
+
+# Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8).
+# During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall
+#  will get directly to the ground without being intercepted, for each PFT..
+PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+# default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+
+# Decides if we route the water or not
+# This flag allows the user to decide if the runoff
+#  and drainage should be routed to the ocean
+#  and to downstream grid boxes.
+RIVER_ROUTING = y
+# default = n
+
+# Name of file which contains the routing information
+# The file provided here should allow the routing module to
+#  read the high resolution grid of basins and the flow direction 
+#  from one mesh to the other.
+ROUTING_FILE = routing.nc
+# default = routing.nc
+
+# Time step of the routing scheme
+# If RIVER_ROUTING
+# This values gives the time step in seconds of the routing scheme. 
+#   It should be multiple of the main time step of ORCHIDEE. One day
+#   is a good value.
+ROUTING_TIMESTEP = 86400
+# default = 86400
+
+# Number of rivers 
+# If RIVER_ROUTING
+# This parameter chooses the number of largest river basins
+#  which should be treated as independently as rivers and not
+#  flow into the oceans as diffusion coastal flow.
+ROUTING_RIVERS = 50
+# default = 50
+
+# Should we compute an irrigation flux 
+# This parameters allows the user to ask the model
+#  to compute an irigation flux. This performed for the
+#  on very simple hypothesis. The idea is to have a good
+#  map of irrigated areas and a simple function which estimates
+#  the need to irrigate.
+DO_IRRIGATION = n
+# default = n
+
+# Name of file which contains the map of irrigated areas
+# If IRRIGATE
+# The name of the file to be opened to read the field
+#  with the area in m^2 of the area irrigated within each
+#  0.5 0.5 deg grid box. The map currently used is the one
+#  developed by the Center for Environmental Systems Research 
+#  in Kassel (1995).
+IRRIGATION_FILE = irrigated.nc
+# default = irrigated.nc
+
+# Should we include floodplains 
+# This parameters allows the user to ask the model
+#  to take into account the flood plains and return 
+#  the water into the soil moisture. It then can go 
+#  back to the atmopshere. This tried to simulate 
+#  internal deltas of rivers.
+DO_FLOODPLAINS = n
+# default = n
+
+# Use XIOS for writing diagnostics file
+# defulat = n
+XIOS_ORCHIDEE_OK=y
+#**************************************************************************
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_high
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_high	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_high	(revision 2330)
@@ -0,0 +1,131 @@
+#
+# Parametres fichiers de sortie
+#
+# Noms des fichiers
+phys_out_filenames=      histmth histday histhf   histhf3h  histhf3hm histstn
+# Sortir ou non les fichiers
+phys_out_filekeys= _AUTO_
+# Niveaux de sorties
+phys_out_filelevels=     5       5       5        5         5         5
+### Type de fichier : global (n) ou stations (y)
+phys_out_filestations =  n       n       n        n         n         y
+### Frequences des sorties
+phys_out_filetimesteps = 1.mth,  1.day,  0.25day, 0.125day, 0.125day, 1800.s
+#
+#
+### variables niveaux pressions 100, 50, 10 hPa a 3h-inst - F.Lott
+flag_t100       = 1, 7, 7, 5, 10, 10
+flag_u100       = 1, 7, 7, 5, 10, 10
+flag_v100       = 1, 7, 7, 5, 10, 10
+flag_w100       = 1, 7, 7, 5, 10, 10
+flag_t50        = 1, 7, 7, 5, 10, 10
+flag_u50        = 1, 7, 7, 5, 10, 10
+flag_v50        = 1, 7, 7, 5, 10, 10
+flag_w50        = 1, 7, 7, 5, 10, 10
+flag_t10        = 1, 7, 7, 5, 10, 10
+flag_u10        = 1, 7, 7, 5, 10, 10
+flag_v10        = 1, 7, 7, 5, 10, 10
+flag_w10        = 1, 7, 7, 5, 10, 10
+# more variables for level 5 histday/month: vitw and pres
+# Vertical wind
+flag_vitw         =  2, 3, 7, 6, 6, 6
+# Air pressure
+flag_pres         =  2, 3, 7, 6, 6, 6
+# w500 for histday
+flag_w500         =  1, 5, 3, 10, 10, 10
+# t700 for histday
+flag_t700         =  1, 5, 3, 10, 10, 10
+# Cloud fraction
+flag_rneb         =  2, 5, 10, 5, 10, 10
+# Aga sortie avec niveau 2
+flag_Aga          =  2, 10, 10, 10, 10, 10
+# niveaux maximum 5 mensuel pour variables CFMIP
+flag_rlu          =  5, 10, 10, 10, 10, 10
+flag_rsu          =  5, 10, 10, 10, 10, 10
+flag_rld          =  5, 10, 10, 10, 10, 10
+flag_rsd          =  5, 10, 10, 10, 10, 10
+flag_rlucs        =  5, 10, 10, 10, 10, 10
+flag_rsucs        =  5, 10, 10, 10, 10, 10
+flag_rldcs        =  5, 10, 10, 10, 10, 10
+flag_rsdcs        =  5, 10, 10, 10, 10, 10
+flag_tnt          =  5, 10, 10, 10, 10, 10
+flag_dtdyn        =  4, 10, 10, 10, 10, 10
+flag_dtphy        =  4, 10, 10, 10, 10, 10
+flag_dtlschr      =  5, 10, 10, 10, 10, 10
+flag_tntr         =  5, 10, 10, 10, 10, 10
+flag_tntc         =  5, 10, 10, 10, 10, 10
+flag_tntscpbl     =  5, 10, 10, 10, 10, 10
+flag_tnhus        =  5, 10, 10, 10, 10, 10
+flag_dqdyn        =  4, 10, 10, 10, 10, 10
+flag_tnhusc       =  5, 10, 10, 10, 10, 10
+flag_dqvdf        =  5, 10, 10, 10, 10, 10
+flag_tnhusscpbl   =  5, 10, 10, 10, 10, 10
+flag_dqphy        =  2, 10, 10, 10, 10, 10
+flag_evu          =  5, 10, 10, 10, 10, 10
+flag_kz           =  4, 10, 10, 10, 10, 10
+###
+# more variables for t tendency monthly
+###
+flag_dtvdf        =  5, 10, 10, 10, 10, 10
+flag_dteva        =  5, 10, 10, 10, 10, 10
+flag_dtcon        =  4, 10, 10, 10, 10, 10
+flag_dtajs        =  4, 10, 10, 10, 10, 10
+flag_dtlsc        =  4, 10, 10, 10, 10, 10
+flag_dtoro        =  4, 10, 10, 10, 10, 10
+flag_dtlif        =  4, 10, 10, 10, 10, 10
+flag_dthin        =  4, 10, 10, 10, 10, 10
+flag_dtec         =  4, 10, 10, 10, 10, 10
+### more variables for q tendency monthly
+flag_dqeva        =  5, 10, 10, 10, 10, 10
+flag_dqcon        =  4, 10, 10, 10, 10, 10
+flag_dqajs        =  4, 10, 10, 10, 10, 10
+flag_dqlsc        =  5, 10, 10, 10, 10, 10
+### nouvelle physique monthly
+flag_dtthe        =  4, 10, 10, 10, 10, 10
+flag_dtwak        =  4, 5, 10, 10, 10, 10
+flag_dqthe        =  4, 10, 10, 10, 10, 10
+flag_dqwak        =  4, 5, 10, 10, 10, 10
+flag_ftime_th     =  4, 10, 10, 5, 10, 10
+#
+# Parametres niveau de sorties differents fichiers
+#
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = _AUTO_
+
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp= _AUTO_
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP= _AUTO_
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP= _AUTO_
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP= _AUTO_
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP= _AUTO_
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_low
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_low	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_low	(revision 2330)
@@ -0,0 +1,60 @@
+#
+# Parametres fichiers de sortie
+#
+# Noms des fichiers
+phys_out_filenames=      histmth histday histhf   histhf3h  histhf3hm histstn
+# Sortir ou non les fichiers
+phys_out_filekeys=  _AUTO_
+# Niveaux de sorties
+phys_out_filelevels=     5       2       2        5         5         5
+### Type de fichier : global (n) ou stations (y)
+phys_out_filestations =  n       n       n        n         n         y
+### Frequences des sorties
+phys_out_filetimesteps = 1.mth,  1.day,  0.25day, 0.125day, 0.125day, 1800.s
+#
+#
+# Parametres niveau de sorties differents fichiers
+#
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = _AUTO_
+
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp= _AUTO_
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP= _AUTO_
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP= _AUTO_
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP= _AUTO_
+
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP= _AUTO_
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_medium
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_medium	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/output.def_medium	(revision 2330)
@@ -0,0 +1,131 @@
+#
+# Parametres fichiers de sortie
+#
+# Noms des fichiers
+phys_out_filenames=      histmth histday histhf   histhf3h  histhf3hm histstn
+# Sortir ou non les fichiers
+phys_out_filekeys= _AUTO_
+# Niveaux de sorties
+phys_out_filelevels=     5       5       2        5         5         5
+### Type de fichier : global (n) ou stations (y)
+phys_out_filestations =  n       n       n        n         n         y
+### Frequences des sorties
+phys_out_filetimesteps = 1.mth,  1.day,  0.25day, 0.125day, 0.125day, 1800.s
+#
+#
+### variables niveaux pressions 100, 50, 10 hPa a 3h-inst - F.Lott
+flag_t100       = 1, 7, 7, 5, 10, 10
+flag_u100       = 1, 7, 7, 5, 10, 10
+flag_v100       = 1, 7, 7, 5, 10, 10
+flag_w100       = 1, 7, 7, 5, 10, 10
+flag_t50        = 1, 7, 7, 5, 10, 10
+flag_u50        = 1, 7, 7, 5, 10, 10
+flag_v50        = 1, 7, 7, 5, 10, 10
+flag_w50        = 1, 7, 7, 5, 10, 10
+flag_t10        = 1, 7, 7, 5, 10, 10
+flag_u10        = 1, 7, 7, 5, 10, 10
+flag_v10        = 1, 7, 7, 5, 10, 10
+flag_w10        = 1, 7, 7, 5, 10, 10
+#
+# more variables for level 5 : vitw and pres
+# Vertical wind
+flag_vitw         =  2, 3, 7, 6, 6, 6
+# Air pressure
+flag_pres         =  2, 3, 7, 6, 6, 6
+# w500 for histday
+flag_w500         =  1, 5, 3, 10, 10, 10
+# t700 for histday
+flag_t700         =  1, 5, 3, 10, 10, 10
+# Cloud fraction
+flag_rneb         =  2, 5, 10, 5, 10, 10
+# Aga sortie avec niveau 2
+flag_Aga          =  2, 10, 10, 10, 10, 10
+# niveaux maximum 5 mensuel pour variables CFMIP
+flag_rlu          =  5, 10, 10, 10, 10, 10
+flag_rsu          =  5, 10, 10, 10, 10, 10
+flag_rld          =  5, 10, 10, 10, 10, 10
+flag_rsd          =  5, 10, 10, 10, 10, 10
+flag_rlucs        =  5, 10, 10, 10, 10, 10
+flag_rsucs        =  5, 10, 10, 10, 10, 10
+flag_rldcs        =  5, 10, 10, 10, 10, 10
+flag_rsdcs        =  5, 10, 10, 10, 10, 10
+flag_tnt          =  5, 10, 10, 10, 10, 10
+flag_dtdyn        =  4, 10, 10, 10, 10, 10
+flag_dtphy        =  4, 10, 10, 10, 10, 10
+flag_dtlschr      =  5, 10, 10, 10, 10, 10
+flag_tntr         =  5, 10, 10, 10, 10, 10
+flag_tntc         =  5, 10, 10, 10, 10, 10
+flag_tntscpbl     =  5, 10, 10, 10, 10, 10
+flag_tnhus        =  5, 10, 10, 10, 10, 10
+flag_dqdyn        =  4, 10, 10, 10, 10, 10
+flag_tnhusc       =  5, 10, 10, 10, 10, 10
+flag_dqvdf        =  5, 10, 10, 10, 10, 10
+flag_tnhusscpbl   =  5, 10, 10, 10, 10, 10
+flag_dqphy        =  2, 10, 10, 10, 10, 10
+flag_evu          =  5, 10, 10, 10, 10, 10
+flag_kz           =  4, 10, 10, 10, 10, 10
+###
+# more variables for t tendency monthly
+###
+flag_dtvdf        =  5, 10, 10, 10, 10, 10
+flag_dteva        =  5, 10, 10, 10, 10, 10
+flag_dtcon        =  4, 10, 10, 10, 10, 10
+flag_dtajs        =  4, 10, 10, 10, 10, 10
+flag_dtlsc        =  4, 10, 10, 10, 10, 10
+flag_dtoro        =  4, 10, 10, 10, 10, 10
+flag_dtlif        =  4, 10, 10, 10, 10, 10
+flag_dthin        =  4, 10, 10, 10, 10, 10
+flag_dtec         =  4, 10, 10, 10, 10, 10
+### more variables for q tendency monthly
+flag_dqeva        =  5, 10, 10, 10, 10, 10
+flag_dqcon        =  4, 10, 10, 10, 10, 10
+flag_dqajs        =  4, 10, 10, 10, 10, 10
+flag_dqlsc        =  5, 10, 10, 10, 10, 10
+### nouvelle physique monthly
+flag_dtthe        =  4, 10, 10, 10, 10, 10
+flag_dtwak        =  4, 5, 10, 10, 10, 10
+flag_dqthe        =  4, 10, 10, 10, 10, 10
+flag_dqwak        =  4, 5, 10, 10, 10, 10
+flag_ftime_th     =  4, 10, 10, 5, 10, 10
+#
+# Parametres niveau de sorties differents fichiers
+#
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = _AUTO_
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp= _AUTO_
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP= _AUTO_
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP= _AUTO_
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP= _AUTO_
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP= _AUTO_
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L19_AP
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L19_AP	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L19_AP	(revision 2330)
@@ -0,0 +1,97 @@
+## $Id$
+#
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=n
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+#
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .99
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp) 
+cld_lc_lsc = 2.6e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp) 
+cld_lc_con = 2.6e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 3600.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 3600.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 1.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 1.
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+
+### nsplit_phys (D=1) 
+nsplit_phys=1
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L39_AP
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L39_AP	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L39_AP	(revision 2330)
@@ -0,0 +1,97 @@
+## $Id$
+#
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=y
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+#
+
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .999
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp) 
+cld_lc_lsc = 4.16e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp) 
+cld_lc_con = 4.16e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 1800.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 1800.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 0.5
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 0.5
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+
+### nsplit_phys (D=1) 
+nsplit_phys=1
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L39_NPv3.1
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L39_NPv3.1	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/physiq.def_L39_NPv3.1	(revision 2330)
@@ -0,0 +1,132 @@
+##############################################################################
+# PARAMETRES ET CLES DE CONFIGURATION LMDZ 
+# Cette parie sera bientot extrait dans un fichier config.def
+##############################################################################
+# D: Valeur par default
+#
+##############################################################################
+# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
+##############################################################################
+# D: Valeur par default
+#
+#Parametres Orographiques et cdrags
+#**********************************
+##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
+ok_limitvrai=n
+#Cdrags 
+f_cdrag_stable=1.
+f_cdrag_ter=1.
+f_cdrag_oce=0.7
+#cdmmax
+cdmmax=2.5E-3
+#cdhmax
+cdhmax=2.0E-3
+##  Orodr  ou  non   pour l orographie
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+#Rugoro
+f_rugoro=0.
+#
+# Rayonnement
+#*********************
+# activation du nouveau code de rayonnement RRTM
+# 0 : Ancien code et 1 : RRTM (D=0)
+iflag_rrtm=0
+#
+##  Activation ou non de la parametrisation de Hines pour la strato
+#******************************************************************
+ok_hines=y
+#
+# Parametres nuages
+#******************
+#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
+cld_lc_lsc=6.e-4
+cld_lc_con=6.e-4
+#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
+cld_tau_lsc=1800.
+cld_tau_con=1800.
+#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
+ffallv_lsc=1.35
+ffallv_con=1.35
+#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
+coef_eva=1e-4
+reevap_ice=y
+#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
+iflag_cldcon=6
+fact_cldcon=1.
+facttemps=0.
+#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
+iflag_pdf=1
+#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
+ok_newmicro=y
+iflag_ratqs=2
+ratqsbas=0.002
+ratqshaut=0.25
+#rayon effectif pour les nuages de glace (D:35)
+rad_froid=35
+#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
+rad_chau1=12
+rad_chau2=11
+##  Choix ou non  de  New oliq               
+new_oliq=y
+#
+rei_min=20.
+rei_max=61.29
+#
+t_glace_min=258.
+t_glace_max=273.13
+#
+# Flags Convection 
+#*****************
+#flag  pour la convection (D:2, 1:LMD, 2:Tiedtke, 3:KE nouvelle physique, 30:KE IPCC)
+iflag_con=3
+#niveau de sorties des diagnos sur la conservation energie
+if_ebil=0
+#efficacite de precepitation maxim (D:.993)
+epmax=0.997
+#ajustement convectif sec au debut de la convection (D: n 0)
+ok_adj_ema=n
+iflag_clw=0
+#fermeture convective (D:1, 0:AR4, 2:ALE and ALP)
+iflag_clos=2
+#loi de melange a l entrainement  (D:1, 0:AR4=PDF plate, 1=PDF)
+iflag_mix=1
+#poids des PDFs plate et en cloche (D: 1 0)
+qqa1=1.
+qqa2=0.
+# Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+#
+Fmax=0.65
+#
+# Flags Couche limite
+#********************
+#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
+iflag_thermals=15
+#pas de temps du spliting pour les thermiques
+nsplit_thermals=1
+tau_thermals=0.
+iflag_thermals_ed=10
+iflag_thermals_optflux=0
+#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
+iflag_pbl=8
+#diffusion turbulente
+ksta_ter=1.e-7
+ksta=1.e-10
+#ok_kzmin : calcul Kzmin dans la CL de surface
+ok_kzmin=y
+#couplage ou non avec la convection
+iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
+seuil_inversion=-0.08
+#rendement sur la puissance fournie par les thermiques a la convection
+alp_bl_k=0.5
+#
+# Flags wakes
+#************
+#activation ou non des wakes (D:0, 0:AR4, 1:nouvelle physique) 
+iflag_wake=1
+alp_offset=0.
+
+nsplit_phys=2
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/run.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/run.def	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/run.def	(revision 2330)
@@ -0,0 +1,56 @@
+# $Id$
+#
+INCLUDEDEF=physiq.def
+INCLUDEDEF=gcm.def
+INCLUDEDEF=orchidee.def
+INCLUDEDEF=output.def
+INCLUDEDEF=config.def
+INCLUDEDEF=reprobus.def
+INCLUDEDEF=guide.def
+INCLUDEDEF=inca.def
+## Type de calendrier utilise
+## valeur possible: earth_360d (defaut), earth_365d, earth_366d
+calend= _AUTO_
+## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici )
+dayref= _AUTO_
+##  Annee de l etat  initial (   avec  4  chiffres   )
+anneeref= _AUTO_
+## Nombre de jours d integration
+nday= _AUTO_
+## Remise a zero de la date initiale
+raz_date= _AUTO_
+## periode de sortie des variables de controle (en pas)
+iconser=240
+## periode d ecriture du fichier histoire (en jour)
+iecri=1
+## flag de sortie dynzon
+ok_dynzon=n
+## periode de stockage fichier dynzon (en jour)
+periodav= _AUTO_
+## activation du calcul d equilibrage de charge
+adjust= _AUTO_
+## activation du filtre fft
+use_filtre_fft=y
+## niveau d impression de controle
+prt_level=0
+###
+### Informations sur la configuration utilisee
+###
+### type_ocean = force / slab  /couple
+### type_ocean is modified automatically by the lmdz.driver 
+type_ocean=_AUTO_
+### version_ocean = nemo / opa8
+version_ocean=nemo
+### activation passage courants surface ocean-glace
+cpl_current=y
+### VEGET= y si ORCHIDEE, =n si bucket
+### VEGET is modified automatically by the lmdz.driver 
+VEGET=_AUTO_
+### Choice of tracers type_trac=lmdz/inca/repr
+### type_trac is set automatically by the lmdz.driver
+type_trac=_AUTO_
+### config_inca=aero/chem needed only if type_trac=inca
+config_inca=_AUTO_ 
+### Only concerning the program ce0l : for creating file grilles_gcm.nc
+grilles_gcm_netcdf=_AUTO_
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/traceur.def
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/traceur.def	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/PARAM/traceur.def	(revision 2330)
@@ -0,0 +1,4 @@
+3
+14 14 H2Ov
+10 10 H2Ol
+10 10 Aga
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_lmdz.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_lmdz.cfg	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_lmdz.cfg	(revision 2330)
@@ -0,0 +1,84 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=AECDFF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ bils_global    | "bils"                       | "" | "bils[d=1]"               | "Surf. total heat flux (GLOBAL)"         | "W/m^2"     | "aire[d=1]"   
+ nettop_global  | "tops topl"                  | "" | "(tops[d=1]-topl[d=2])"   | "TOA. total heat flux (GLOBAL)"          | "W/m^2"     | "aire[d=1]"
+ nettop0_global | "tops0 topl0"                | "" | "(tops0[d=1]-topl0[d=2])" | "TOA. total heat flux ClearSky (GLOBAL)" | "W/m^2"     | "aire[d=1]"
+ t2m_global     | "t2m"                        | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (GLOBAL)"       | "degrees C" | "aire[d=1]"
+ t2m_land       | "t2m pourc_ter pourc_lic"    | "" | "(t2m[d=1]-273.15)"       | "Temperature at 2 meters (LAND)"         | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ tsol_global    | "tsol"                       | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (GLOBAL)"           | "degrees C" | "aire[d=1]"
+ tsol_land      | "tsol pourc_ter pourc_lic"   | "" | "(tsol[d=1]-273.15)"      | "Surface Temperature (LAND)"             | "degrees C" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ precip_global  | "precip"                     | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (GLOBAL)"  | "mm/d"      | "aire[d=1]"
+ precip_land    | "precip pourc_ter pourc_lic" | "" | "precip[d=1]*86400"       | "Precipitation Totale liq+sol (LAND)"    | "mm/d"      | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ evap_global    | "evap"                       | "" | "evap[d=1]"               | "Evaporation (GLOBAL)"                   | "kg/(s*m2)" | "aire[d=1]"
+ evap_land      | "evap pourc_ter pourc_lic"   | "" | "evap[d=1]"               | "Evaporation (LAND)"                     | "kg/(s*m2)" | "aire[d=1]*((pourc_ter[d=2]+pourc_lic[d=3])/100.)"
+ flat_global    | "lat_ter pourc_ter lat_sic pourc_sic lat_lic pourc_lic lat_oce pourc_oce" | "" | "(lat_ter[d=1]*pourc_ter[d=2]+lat_sic[d=3]*pourc_sic[d=4]+lat_lic[d=5]*pourc_lic[d=6]+lat_oce[d=7]*pourc_oce[d=8])" | "Latent Heat Flux (GLOBAL)"      | "W/m^2" | "aire[d=1]"
+ od550aer_forcing       | "od550aer"              | "" | "od550aer[d=1]"           | "Total aerosol optical depth at 550nm"   | "-"         | "aire[d=1]"   
+ od550lt1aer_forcing    | "od550lt1aer"           | "" | "od550lt1aer[d=1]"        | "Fine mode optical depth"                | "-"         | "aire[d=1]"   
+ absvisaer_forcing      | "absvisaer"             | "" | "absvisaer[d=1]"          | "Absorption aerosol visible optical depth" | "-"       | "aire[d=1]"   
+ swtoaas_ant_forcing    | "swtoaas_ant"           | "" | "swtoaas_ant[d=1]"        | "Anthropogenic aerosol radiative forcing all-sky at TOA"         | "W/m^2"   | "aire[d=1]"   
+ swtoacs_ant_forcing    | "swtoacs_ant"           | "" | "swtoacs_ant[d=1]"        | "Anthropogenic aerosol radiative forcing clear-sky at TOA"       | "W/m^2"   | "aire[d=1]" 
+ swtoacf_ant_forcing    | "swtoacf_ant"           | "" | "swtoacf_ant[d=1]"        | "Anthropogenic aerosol impact on cloud radiative forcing at TOA" | "W/m^2"   | "aire[d=1]" 
+ swsrfas_ant_forcing    | "swsrfas_ant"           | "" | "swsrfas_ant[d=1]"        | "Anthropogenic aerosol radiative forcing all-sky at SRF"         | "W/m^2"   | "aire[d=1]"  
+ swsrfcs_ant_forcing    | "swsrfcs_ant"           | "" | "swsrfcs_ant[d=1]"        | "Anthropogenic aerosol radiative forcing clear-sky at SRF"       | "W/m^2"   | "aire[d=1]" 
+ swsrfcf_ant_forcing    | "swsrfcf_ant"           | "" | "swsrfcf_ant[d=1]"        | "Anthropogenic aerosol impact on cloud radiative forcing at SRF" | "W/m^2"   | "aire[d=1]"
+ swtoaas_nat_forcing    | "swtoaas_nat"           | "" | "swtoaas_nat[d=1]"        | "Natural aerosol radiative forcing all-sky at TOA"               | "W/m^2"   | "aire[d=1]"   
+ swtoacs_nat_forcing    | "swtoacs_nat"           | "" | "swtoacs_nat[d=1]"        | "Natural aerosol radiative forcing clear-sky at TOA"             | "W/m^2"   | "aire[d=1]" 
+ swtoacf_nat_forcing    | "swtoacf_nat"           | "" | "swtoacf_nat[d=1]"        | "Natural aerosol impact on cloud radiative forcing at TOA"       | "W/m^2"   | "aire[d=1]" 
+ swsrfas_nat_forcing    | "swsrfas_nat"           | "" | "swsrfas_nat[d=1]"        | "Natural aerosol radiative forcing all-sky at SRF"               | "W/m^2"   | "aire[d=1]"  
+ swsrfcs_nat_forcing    | "swsrfcs_nat"           | "" | "swsrfcs_nat[d=1]"        | "Natural aerosol radiative forcing clear-sky at SRF"             | "W/m^2"   | "aire[d=1]" 
+ swsrfcf_nat_forcing    | "swsrfcf_nat"           | "" | "swsrfcf_nat[d=1]"        | "Natural aerosol impact on cloud radiative forcing at SRF"       | "W/m^2"   | "aire[d=1]"
+ topswai_forcing        | "topswai"               | "" | "topswai[d=1]"            | "AIE at TOA"                             | "W/m^2" | "aire[d=1]"
+ solswai_forcing        | "solswai"               | "" | "solswai[d=1]"            | "AIE at SRF"                             | "W/m^2" | "aire[d=1]"
+ swtoacf_zero_forcing   | "swtoacf_zero"          | "" | "swtoacf_zero[d=1]"       | "Cloud radiative forcing (allsky-clearsky fluxes) at TOA" | "W/m^2" | "aire[d=1]"
+ swsrfcf_zero_forcing   | "swsrfcf_zero"          | "" | "swsrfcf_zero[d=1]"       | "Cloud radiative forcing (allsky-clearsky fluxes) at SRF" | "W/m^2" | "aire[d=1]"
+ tro3_strato_forcing    | "tro3"                  | "" | "tro3[x=@din,y=@din,k=1:7@sum,d=1]"  | "ozone strato k=1:7@sum" | "Mole" | ""
+ tro3_tropo_forcing     | "tro3"                  | "" | "tro3[x=@din,y=@din,k=8:17@sum,d=1]" | "ozone trop k=8:17@sum"  | "Mole" | ""
+ solaire_forcing        | "solaire"               | "" | "solaire[d=1]"   | "Constante solaire"      | "W/m^2" | "1"
+ co2_ppm_forcing        | "co2_ppm"               | "" | "co2_ppm[d=1]"   | "Concentration du CO2"   | "ppm"   | "1"
+ CH4_ppb_forcing        | "CH4_ppb"               | "" | "CH4_ppb[d=1]"   | "Concentration du CH4"   | "ppb"   | "1"
+ N2O_ppb_forcing        | "N2O_ppb"               | "" | "N2O_ppb[d=1]"   | "Concentration du N2O"   | "ppb"   | "1"
+ CFC11_ppt_forcing      | "CFC11_ppt"             | "" | "CFC11_ppt[d=1]" | "Concentration du CFC11" | "ppt"   | "1"
+ CFC12_ppt_forcing      | "CFC12_ppt"             | "" | "CFC12_ppt[d=1]" | "Concentration du CFC12" | "ppt"   | "1"
+## R_ecc_forcing      | "R_ecc"                  | "" | "R_ecc[d=1]"   | "Excentricite"      | "-"     | "1"
+## R_peri_forcing     | "R_peri"                 | "" | "R_peri[d=1]"  | "Equinoxe"          | "-"     | "1"
+## R_incl_forcing     | "R_incl"                 | "" | "R_incl[d=1]"  | "Inclinaison"       | "deg"   | "1"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_orchidee.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_orchidee.cfg	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_orchidee.cfg	(revision 2330)
@@ -0,0 +1,48 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=E7FFAB
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+temp_sol_lands | "temp_sol"         |  ""              | "temp_sol[d=1]"                    | "TSOL (LANDS)"                 | "K/d"    | "Areas[d=1]*Contfrac[d=1]"
+humidity_lands | "bqsb gqsb"        |  ""              | "(bqsb[d=1]+gqsb[d=2])"            | "Total Soil Moisture  (LANDS)" | "1"      | "Areas[d=1]*Contfrac[d=1]"
+albedo_lands   | "alb_vis alb_nir"  |  ""              | "((alb_vis[d=1]+alb_nir[d=2])*0.5)"| "Mean Albedo (LANDS)"          | "1"      | "Areas[d=1]*Contfrac[d=1]"
+snow_lands     | "snow"             |  ""              | "snow[d=1]"                        | "Snow Mass (LANDS)"            | "kg/m^2" | "Areas[d=1]*Contfrac[d=1]"
+maxveget_lands | "maxvegetfrac"     |  ""              | "maxvegetfrac[d=1,K=12:13]"        | "vegetmax[pft=12,13] (LANDS)"  | "1"      | "2"
+nee_lands      | "nee maxvegetfrac" |  ""              | "(nee[d=1]*365*86400*maxvegetfrac[d=2]*Areas[d=1]*Contfrac[d=1]/1e15)"  | "Net Ecosystem Exchange"    | "PgC/yr" | "2"
+maxveget_forcing | "maxvegetfrac"   |  ""              | "((maxvegetfrac[d=1,K=12]+maxvegetfrac[d=1,K=13])*Areas[d=1]*Contfrac[d=1]/1e12)" | "maxveget surface[pft=12,13] "  | "Mkm^2"  | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_stomate.cfg
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_stomate.cfg	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/GENERAL/POST/monitoring01_stomate.cfg	(revision 2330)
@@ -0,0 +1,51 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=EEE8AA
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+fLuc_fHarvest_lands | "CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE CONTFRAC"  | "" | "((CONVFLUX[d=1]+CFLUX_PROD10[d=2]+CFLUX_PROD100[d=3]+HARVEST_ABOVE[d=4])*AREAS[d=1]*CONTFRAC[d=5]*365/1e15)"                           | "CO2 flux from Land Use Change and Crop Harvesting"            | "PgC/yr" | "2"
+fHarvest_lands      | "HARVEST_ABOVE CONTFRAC"             | "" | "((HARVEST_ABOVE[d=1])*AREAS[d=1]*CONTFRAC[d=2]*365/1e15)"                           | "CO2 flux from Land Use Change and Crop Harvesting"            | "PgC/yr" | "2"
+nbp_lands           | "nbp"                                | "" | "(nbp[d=1]*Areas[d=1]*86400*365/1e12)"             | "Net Biospheric Production"       | "PgC/yr" | "2"
+cSoil_lands         | "TOTAL_SOIL_CARB VEGET_MAX CONTFRAC" | "" | "(TOTAL_SOIL_CARB[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"     | "Carbon Soil in Pool"                                   | "PgC"    | "2"
+cVeg_lands          | "TOTAL_M VEGET_MAX CONTFRAC"         | "" | "(TOTAL_M[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"             | "Carbon in vegetation"                                       | "PgC"    | "2"
+npp_lands           | "NPP VEGET_MAX CONTFRAC"             | "" | "(NPP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"             | "Net Primary Production"                                  | "PgC/yr" | "2"
+rh_lands            | "HET_RESP VEGET_MAX CONTFRAC"        | "" | "(HET_RESP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"        | "Heterotrophic Respiration"                                     | "PgC/yr" | "2"
+fFire_lands         | "CO2_FIRE VEGET_MAX CONTFRAC"        | "" | "(CO2_FIRE[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"        | "CO2 emission from fire"                                     | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+
+
Index: CONFIG/UNIFORM/v6/LMDZORINCA_v6/README
===================================================================
--- CONFIG/UNIFORM/v6/LMDZORINCA_v6/README	(revision 2330)
+++ CONFIG/UNIFORM/v6/LMDZORINCA_v6/README	(revision 2330)
@@ -0,0 +1,13 @@
+How to create a job and run directory :
+
+Choose in EXPERIMENTS the experiment to be done and copy the corresponding config.card to modipsl/config/LMDZORINCA_v5/, beside this README file. Modify the config.card as usual, for at least the JobName. Apply ../../util/ins_job and the creation of a new run directory will be done :
+  - the run directory will be created with the same name as JobName in config.card. If a directory with the same name already exists, nothing will be done.
+  - the PARAM, DRIVER and POST directories from GENERAL/ will be copied into the new run directory.
+  - the COMP directory from EXPERIMENTS/ will be copied into the new run directory, according to the variable ExpType in config.card.
+  - the config.card will be moved into the run directory.
+  - a job will be created in the run directory.
+
+Once the run directory has been created with ins_job, this directory is used as a normal run directory. More run directories can be created using ins_job several times. ins_job will never write in an existing run directory.
+
+
+For details see http://forge.ipsl.jussieu.fr/igcmg/wiki/Modipsl_exec
