Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/lim2.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/lim2.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/lim2.card	(revision 1950)
@@ -0,0 +1,46 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namelist_ice_${RESOL_OCE}, namelist_ice)
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_ice.nc, restart_icemod.nc, restart_ice_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (ORCA2_1m_icemod.nc, ${R_OUT_ICE_O_M}/${PREFIX}_1M_icemod.nc, Post_1M_icemod), \
+        (ORCA2_1d_icemod.nc, ${R_OUT_ICE_O_D}/${PREFIX}_1D_icemod.nc, NONE)
+
+[Post_1M_icemod]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (bmelt, evap, grLateral, ialb, ice_pres, iicetemp, iicethic, iicevelu, iicevelv, ileadfra, isnowthi, prsn, rsdssi, sblsi, snoToIce, snomelt, soicecov, strairx, strairy, tmelt, transifs, transix, transiy, tsice)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_icemod]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (iicethic, iicevelu, iicevelv, ileadfra)
+ChunckJob2D = 200Y
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/lim2.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/lim2.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/lim2.driver	(revision 1950)
@@ -0,0 +1,31 @@
+#!/bin/ksh
+
+#-----------------------------------
+function ICE_Initialize
+{ 
+    IGCM_debug_PushStack "ICE_Initialize"
+
+    echo INITIALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Initialize"
+}
+
+#-----------------------------------
+function ICE_Update
+{
+    IGCM_debug_PushStack "ICE_Update"
+
+    echo UPDATE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Update"
+}
+
+#-----------------------------------
+function ICE_Finalize
+{
+    IGCM_debug_PushStack "ICE_Finalize"
+
+    echo FINALIZE ICE !!!
+
+    IGCM_debug_PopStack "ICE_Finalize"
+}
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/lmdz.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/lmdz.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/lmdz.card	(revision 1950)
@@ -0,0 +1,186 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+ByPass_hgardfou_teta=n
+ByPass_hgardfou_mats=n
+LMDZ_NbPeriod_adjust=3
+# LMDZ_NbPeriod_adjust=0
+# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart experiment
+# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/pdControl/XXXXXX/ATM/Debug/pdControl_XXXXXXX_Bands_96x95x19_3prc.dat_3
+
+# To force higher writing level for aerosol. 
+# LMDZ_Freq_aero : frequency for writing (in PeriodLength : 10Years = 120) , 
+# LMDZ_Length_aero : length of writing (in PeriodLength : 1Year = 12). 
+# To cancel this option put LMDZ_Length_aero=0
+LMDZ_Freq_aero=120
+LMDZ_Length_aero=12
+
+# Set COSP activation and Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_COSP_OK=n
+LMDZ_COSP_monthly=y
+LMDZ_COSP_daily=y
+LMDZ_COSP_hf=n
+
+# Set NMC Outputs frequency (monthly, daily, HF) = y/n
+LMDZ_NMC_monthly=y
+LMDZ_NMC_daily=y
+LMDZ_NMC_hf=y
+
+[InitialStateFiles]
+List=	(${R_INIT}/ATM/${config_UserChoices_TagName}/Albedo.nc, .), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sic_1x1_clim.nc, amipbc_sic_1x1.nc), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sst_1x1_clim.nc, amipbc_sst_1x1.nc), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/ECDYN.nc.20020101,      ECDYN.nc), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/ECPHY.nc,      .), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/Relief.nc,     .), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/Rugos.nc,      .), \
+	(${R_INIT}/ATM/${config_UserChoices_TagName}/landiceref.nc, .), \
+        (${R_INIT}/ATM/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/o2a.nc, .) 
+
+[BoundaryFiles]
+List=   ()
+# With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM)
+# With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations)
+ListNonDel= (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1855_v3.nc, aerosols.nat.nc),\
+	    (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/climoz_LMDZ_1855_v2.nc, climoz_LMDZ.nc)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}, physiq.def), \
+	(${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \
+	(${SUBMIT_DIR}/PARAM/cosp_input_nl.txt,                .),    \
+	(${SUBMIT_DIR}/PARAM/cosp_output_nl.txt,               .),    \
+	(${SUBMIT_DIR}/PARAM/run.def, .), \
+	(${SUBMIT_DIR}/PARAM/traceur.def, .)
+
+[RestartFiles]
+List=	(restart.nc, restart.nc, start.nc), \
+	(restartphy.nc, restartphy.nc,  startphy.nc)
+
+[OutputText]
+List=   (lmdz.x.prt)
+
+[OutputFiles]
+List=	(histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,      Post_1M_histmth),     \
+	(histmthCOSP.nc,  ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,  Post_1M_histmthCOSP), \
+	(histmthNMC.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,   Post_1M_histmthNMC),  \
+	(dynzon.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_dynzon.nc,       Post_1M_dynzon),      \
+	(histday.nc,      ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,      Post_1D_histday),     \
+	(histdayCOSP.nc,  ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,  Post_1D_histdayCOSP), \
+	(histdayNMC.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,   Post_1D_histdayNMC),  \
+	(histhf.nc,       ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,       Post_HF_histhf),      \
+	(histhfCOSP.nc,   ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,   Post_HF_histhfCOSP),  \
+	(histhfNMC.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,    Post_HF_histhfNMC),   \
+	(histhf3h.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,     Post_3H_histhf3h),    \
+	(histhf3hm.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,    Post_3H_histhf3hm)
+
+[Post_1M_histmth]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds, aire)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, Aga)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_histmthCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF 
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1M_histmthNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap, psbg, uv, vq, vT, wq, vphi, wT, uxu, vxv, TxT, tro3, tro3_daylight)
+ChunckJob3D = 100Y
+Seasonal=ON
+
+[Post_1M_dynzon]
+Patches = ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_histday]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
+ChunckJob2D = 200Y
+TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_histdayNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_HF_histhf]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (cldt, psol, q2m, slp, SWnetOR, SWdownOR, LWdownOR, precip, pluc, plul, t2m, tsol, u10m, v10m)
+ChunckJob2D = 50Y
+TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfCOSP]
+Patches = ()
+GatherWithInternal = (lon, lat, height, sza, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
+ChunckJob2D = OFF
+TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_HF_histhfNMC]
+Patches = ()
+GatherWithInternal = (lon, lat, plev, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
+ChunckJob3D = 10Y
+Seasonal=OFF
+
+[Post_3H_histhf3h]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter)
+TimeSeriesVars2D = (phis, tsol, t2m, q2m, u10m, v10m, psol, topl, bils)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_3H_histhf3hm]
+Patches= ()
+GatherWithInternal = (lon, lat, presnivs, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (precip, flat, sens, LWdnSFC, LWupSFC, SWdnSFC, SWupSFC, pluc, snow, LWdnSFCclr, SWdnSFCclr, LWupSFCclr, cldt)
+ChunckJob2D = OFF
+TimeSeriesVars3D = ()
+ChunckJob3D = OFF
+Seasonal=OFF
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/lmdz.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/lmdz.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/lmdz.driver	(revision 1950)
@@ -0,0 +1,224 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function LMDZ_sed
+{
+    IGCM_debug_PushStack "LMDZ_sed"
+
+    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
+    RET=$?
+    echo "LMDZ_sed : ${1} ${2} ${3}"
+    \mv ${1}.tmp ${1}
+
+    IGCM_debug_PopStack "LMDZ_sed"
+    return $RET
+}
+
+function ATM_Initialize
+{
+    IGCM_debug_PushStack "ATM_Initialize"
+
+    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
+
+    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
+
+    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
+
+    ##-- Calendar type for LMDZ
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+            CalendarTypeForLmdz=earth_366d;;
+        noleap)
+            CalendarTypeForLmdz=earth_365d;;
+        360d)
+            CalendarTypeForLmdz=earth_360d;;
+        *)
+            CalendarTypeForLmdz=earth_360d
+    esac
+
+    ##--Frequency purpose ....
+    ##--  Initialisation  ....
+    OK_instan=n
+    OK_journe=n
+    OK_mensuel=n
+    ok_hf=n
+
+    case ${config_UserChoices_PeriodLength} in
+	1Y|1y|1M|1m) OK_mensuel=y ;;
+	5D|5d|1D|1d) OK_journe=y ;;
+    esac
+
+    for frequency in ${config_ATM_WriteFrequency} ; do
+	case ${frequency} in
+	    5D|5d|1D|1d) OK_journe=y ;;
+	esac
+	case ${frequency} in
+	    HF|hf) ok_hf=y ;;
+	esac
+    done
+
+    ## Read LMDZ_NbPeriod_adjust option in lmdz.card 
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
+    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
+
+    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
+        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
+        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
+    fi
+
+    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
+    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
+    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}
+
+    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
+    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
+    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
+    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
+    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
+
+    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
+    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
+    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
+    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
+
+    IGCM_debug_PopStack "ATM_Initialize"
+}
+
+#-----------------------------------------------------------------
+function ATM_Update
+{
+    IGCM_debug_PushStack "ATM_Update"
+
+    case ${config_UserChoices_PeriodLength} in
+        *Y|*y) 
+               LMDZ_ecrit_mth=30. 
+               LMDZ_ecrit_ISCCP=30.
+               LMDZ_periodav=30.
+               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
+                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d 
+                  exit
+               fi
+               ;;
+        *)
+               LMDZ_ecrit_mth=${PeriodLengthInDays}.
+               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
+               LMDZ_periodav=${PeriodLengthInDays}.
+               ;;
+    esac
+
+    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
+    if [ ${CumulPeriod} -eq 1 ] ; then
+	RAZ_DATE=1
+    else
+	RAZ_DATE=0
+    fi
+
+    ## algo : For CumulPeriod=1 ; 
+    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
+    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
+    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
+    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
+
+    if [ ${CumulPeriod} -eq 1 ] ; then
+        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
+            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
+            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
+            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
+        fi
+    fi
+
+    LMDZ_adjust=n
+    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
+
+    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
+    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
+
+    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
+
+    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
+    LMDZ_sed physiq.def OK_instan   ${OK_instan}
+    LMDZ_sed physiq.def OK_journe   ${OK_journe}
+    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
+    LMDZ_sed physiq.def ok_hf       ${ok_hf}
+    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
+    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
+    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
+    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
+    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
+    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
+    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
+
+    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified
+
+    ## run.def parameters
+    LMDZ_sed run.def dayref   ${InitDay}
+    LMDZ_sed run.def anneeref ${InitYear}
+    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
+    LMDZ_sed run.def nday     ${PeriodLengthInDays}
+    LMDZ_sed run.def raz_date ${RAZ_DATE}
+    LMDZ_sed run.def periodav ${LMDZ_periodav}
+    LMDZ_sed run.def adjust   ${LMDZ_adjust}
+
+    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
+    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
+    if [ ${ByPass_hgardfou_teta} = y ] ; then
+	awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
+	IGCM_sys_Mv gcm.def.tmp gcm.def
+	echo
+	IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
+	echo
+	cat gcm.def
+	ByPass_hgardfou_teta=n
+	IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
+    fi
+
+    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
+    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
+    if [ ${ByPass_hgardfou_mats} = y ] ; then
+	sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
+        IGCM_sys_Mv gcm.def.tmp gcm.def
+        echo
+        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
+        echo
+        cat gcm.def
+        ByPass_hgardfou_mats=n
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
+    fi
+
+    if ( ${FirstInitialize} ) ; then
+
+	if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
+	    if [ ${DRYRUN} -le 2 ] ; then
+                ##-- suppression of ozone file construction --
+                cp physiq.def physiq.def.save
+                LMDZ_sed physiq.def read_climoz 0
+		IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
+		if [ ${DRYRUN} -le 1 ] ; then
+		    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
+                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
+                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
+		fi
+                IGCM_sys_Mv physiq.def.save physiq.def
+	    else
+		echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
+		echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
+	    fi
+	fi
+
+    fi
+
+    IGCM_debug_PopStack "ATM_Update"
+}
+
+#-----------------------------------
+function ATM_Finalize
+{
+    IGCM_debug_PushStack "ATM_Finalize"
+
+    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
+
+    echo FINALIZE ATM !
+
+    IGCM_debug_PopStack "ATM_Finalize"
+}
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/oasis.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/oasis.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/oasis.card	(revision 1950)
@@ -0,0 +1,135 @@
+[Compatibility] 
+libIGCM=1.0 
+ 	 
+[UserChoices]
+OutputMode=y
+
+[InitialStateFiles]
+List=	(${R_INIT}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/flxat.nc, flxat.nc), \
+	(${R_INIT}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/sstoc.nc, sstoc.nc)
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/grids.nc, grids.nc),\
+	    (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/masks.nc, masks.nc),\
+	    (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/areas.nc, areas.nc),\
+	    (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/mozaic.wa2o, wa2o.flx),\
+	    (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/mozaic.wo2a, wo2a.tsg),\
+	    (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/mozaic.wa2o.runoff, wa2o.run),\
+	    (${R_BC}/CPL/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/mozaic.wa2o.calvin, wa2o.cal)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namcouple_${RESOL_CPL}, namcouple), \
+	(${SUBMIT_DIR}/PARAM/cf_name_table.txt, cf_name_table.txt)
+
+[RestartFiles]
+List=	(flxat.nc, flxat.nc, flxat.nc),\
+	(sstoc.nc, sstoc.nc, sstoc.nc)
+
+[OutputText]
+List=   (cplout, Oasis.prt)
+
+[OutputFiles]
+List=	(SISUTESW_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SISUTESW.nc,    Post_ncks_ncra),\
+	(SIICECOV_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICECOV.nc,    Post_ncks_ncra),\
+	(SIICTEMW_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICTEMW.nc,    Post_ncks_ncra),\
+	(SIICEALW_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_SIICEALW.nc,    Post_ncks_ncra),\
+	(COTAUXXU_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXU.nc,    Post_ncks_ncra),\
+	(CURRENTX_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTX.nc,    Post_ncks_ncra),\
+	(CURRENTY_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTY.nc,    Post_ncks_ncra),\
+	(CURRENTZ_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CURRENTZ.nc,    Post_ncks_ncra),\
+	(COTAUXXV_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUXXV.nc,    Post_ncks_ncra),\
+	(COTAUYYU_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYU.nc,    Post_ncks_ncra),\
+	(COTAUYYV_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUYYV.nc,    Post_ncks_ncra),\
+	(COTAUZZU_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZU.nc,    Post_ncks_ncra),\
+	(COTAUZZV_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTAUZZV.nc,    Post_ncks_ncra),\
+	(COWINDSP_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COWINDSP.nc,    Post_ncks_ncra),\
+	(COTOTRAI_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTRAI.nc,    Post_ncks_ncra),\
+	(COTOTSNO_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTSNO.nc,    Post_ncks_ncra),\
+	(COTOTEVA_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COTOTEVA.nc,    Post_ncks_ncra),\
+	(COICEVAP_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COICEVAP.nc,    Post_ncks_ncra),\
+	(COQSRMIX_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQSRMIX.nc,    Post_ncks_ncra),\
+	(COQNSMIX_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COQNSMIX.nc,    Post_ncks_ncra),\
+	(COSHFICE_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COSHFICE.nc,    Post_ncks_ncra),\
+	(CONSFICE_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CONSFICE.nc,    Post_ncks_ncra),\
+	(CODFLXDT_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_CODFLXDT.nc,    Post_ncks_ncra),\
+	(COCALVIN_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COCALVIN.nc,    Post_ncks_ncra),\
+	(COLIQRUN_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_COLIQRUN.nc,    Post_ncks_ncra),\
+	(O_SSTSST_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_SSTSST.nc,    Post_ncks_ncra),\
+	(OIceFrac_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceFrac.nc,    Post_ncks_ncra),\
+	(O_TepIce_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_TepIce.nc,    Post_ncks_ncra),\
+	(O_AlbIce_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_AlbIce.nc,    Post_ncks_ncra),\
+	(O_OCurx1_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurx1.nc,    Post_ncks_ncra),\
+	(O_OCury1_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCury1.nc,    Post_ncks_ncra),\
+	(O_OCurz1_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OCurz1.nc,    Post_ncks_ncra),\
+	(O_OTaux1_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux1.nc,    Post_ncks_ncra),\
+	(O_OTaux2_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTaux2.nc,    Post_ncks_ncra),\
+	(O_OTauy1_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy1.nc,    Post_ncks_ncra),\
+	(O_OTauy2_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauy2.nc,    Post_ncks_ncra),\
+	(O_OTauz1_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz1.nc,    Post_ncks_ncra),\
+	(O_OTauz2_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_OTauz2.nc,    Post_ncks_ncra),\
+	(O_Wind10_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Wind10.nc,    Post_ncks_ncra),\
+	(OTotRain_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotRain.nc,    Post_ncks_ncra),\
+	(OTotSnow_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotSnow.nc,    Post_ncks_ncra),\
+	(OTotEvap_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OTotEvap.nc,    Post_ncks_ncra),\
+	(OIceEvap_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OIceEvap.nc,    Post_ncks_ncra),\
+	(O_QsrMix_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrMix.nc,    Post_ncks_ncra),\
+	(O_QsrIce_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QsrIce.nc,    Post_ncks_ncra),\
+	(O_QnsMix_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsMix.nc,    Post_ncks_ncra),\
+	(O_QnsIce_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_QnsIce.nc,    Post_ncks_ncra),\
+	(O_dQnsdT_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_dQnsdT.nc,    Post_ncks_ncra),\
+	(O_Runoff_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_O_Runoff.nc,    Post_ncks_ncra),\
+	(OCalving_out.${DATE_CPL}.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_OCalving.nc,    Post_ncks_ncra),\
+	(TEMPO_1D_cpl_atm.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_atm.nc , Post_1D_cpl_atm), \
+	(TEMPO_1D_cpl_oce.nc,    ${R_OUT_CPL_O_D}/${PREFIX}_1D_cpl_oce.nc , Post_1D_cpl_oce), \
+	(TEMPO_1M_cpl_atm.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_atm.nc , Post_1M_cpl_atm), \
+	(TEMPO_1M_cpl_oce.nc,    ${R_OUT_CPL_O_M}/${PREFIX}_1M_cpl_oce.nc , Post_1M_cpl_oce)
+
+[Post_ncks_ncra]
+Patches = (Patch_20091116_ncks_ncra)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1D_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = ()
+TimeSeriesVars2D = ()
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_cpl_atm]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (SIICEALW, SIICECOV, SISUTESW, COCALVIN, COICEVAP, COLIQRUN, CONSFICE, COQNSMIX, COQSRMIX, COSHFICE, COTOTEVA, COTOTRAI, COTOTSNO)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_cpl_oce]
+Patches = (Patch_20091119_put_out)
+GatherWithInternal = (lon, lat, time)
+TimeSeriesVars2D = (OCalving, OIceEvap, OIceFrac, OTotEvap, OTotRain, OTotSnow, O_AlbIce, O_QnsIce, O_QnsMix, O_QsrIce, O_QsrMix, O_Runoff)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/oasis.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/oasis.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/oasis.driver	(revision 1950)
@@ -0,0 +1,108 @@
+#!/bin/ksh
+#-----------------------------------
+CPL_Initialize ()
+{
+    IGCM_debug_PushStack "CPL_Initialize"
+ 
+    echo INITIALIZE CPL !!!
+
+    RESOL_CPL=$( echo $RESOL | awk "-F-" '{print $1}' )
+
+    #D- MPI context used to launch the coupled model
+    LIBMPI=$(cat ${SUBMIT_DIR}/../.libmpi)
+    echo LIBMPI=${LIBMPI}
+
+    #D- MPISUSPEND=ON required for MPMD mode used by oasis
+    export MPISUSPEND=ON
+
+    IGCM_sys_build_run_file ${LIBMPI}
+
+    CPL_OkDay="n"
+    CPL_OkMonth="n"
+
+    for CPL_Frequency in ${config_CPL_WriteFrequency} ; do
+	case ${CPL_Frequency} in
+	    *D|*d) CPL_OkDay="y"   ;;
+	    *M)    CPL_OkMonth="y" ;;
+	esac
+    done
+
+    IGCM_debug_PopStack "CPL_Initialize"
+
+}
+
+#-----------------------------------
+CPL_Update ()
+{
+    IGCM_debug_PushStack "CPL_Update"
+
+    ############ Update Time and Counters ##############
+    ##-- Calcul de la duree du job (en secondes)
+    (( D_JOB_SEC = 3600 * 24 * PeriodLengthInDays ))
+
+    # nleapy configuration
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+            CPL_calendar=1;;
+        noleap)
+            CPL_calendar=0;;
+        360d)
+            CPL_calendar=30;;
+        *)
+            CPL_calendar=30
+    esac
+
+    ############ Update Other Parameters  ##############
+    ## Read Output_mode option in oasis.card --> Put "y" to have coupling variables in ouptut files
+    CPL_OutputMode="n"
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/oasis.card UserChoices OutputMode 
+    eval CPL_OutputMode=\${oasis_UserChoices_OutputMode} > /dev/null 2>&1
+    echo CPL_OutputMode = ${CPL_OutputMode}
+    CPL_OutputVar='EXPORTED'
+    if [ ${CPL_OutputMode} = y ] ; then
+	CPL_OutputVar='EXPOUT'
+    fi
+
+    ############ Update Parameter Files   ##############
+    sed -e "s/<initial_date>/${PeriodDateBegin}/" \
+	-e "s/<calendar_type>/${CPL_calendar}/" \
+	-e "s/<total_time>/${D_JOB_SEC}/" \
+	-e "s/<lib_mpi>/${LIBMPI}/" \
+	-e "s/<nproc_atm>/${NUM_PROC_ATM}/g" \
+	-e "s/<nproc_oce>/${NUM_PROC_OCE}/g" \
+	-e "s/<output_mode>/${CPL_OutputVar}/g" \
+	namcouple > namcouple.tmp
+    IGCM_sys_Mv namcouple.tmp namcouple
+
+    # Unused files we want to remove
+    eval FileToBeDeleted[${#FileToBeDeleted[@]}]=trace
+    eval FileToBeDeleted[${#FileToBeDeleted[@]}]=gweights
+    eval FileToBeDeleted[${#FileToBeDeleted[@]}]=mweights
+    eval FileToBeDeleted[${#FileToBeDeleted[@]}]=anaisout
+
+    IGCM_debug_PopStack "CPL_Update"
+}
+
+#-----------------------------------
+CPL_Finalize ()
+{
+    IGCM_debug_PushStack "CPL_Finalize"
+
+    DATE_CPL=$(echo ${PeriodDateBegin} | sed -e "{ s/^\(.\{4\}\)/\1-/;s/\(-.\{2\}\)/\1-/; }");
+    DATE_CPL=${DATE_CPL}"T00:00:00"
+    
+    echo ${DATE_CPL} ${CPL_OutputMode} ${CPL_OkDay} ${CPL_OkMonth}
+
+    if [ "${CPL_OutputMode}" = "y" ] ; then
+
+        [[ ${CPL_OkDay}   = "y" ]] && date >TEMPO_1D_cpl_atm.nc
+        [[ ${CPL_OkMonth} = "y" ]] && date >TEMPO_1M_cpl_atm.nc
+        [[ ${CPL_OkDay}   = "y" ]] && date >TEMPO_1D_cpl_oce.nc
+        [[ ${CPL_OkMonth} = "y" ]] && date >TEMPO_1M_cpl_oce.nc
+
+    fi
+
+    echo FINALIZE CPL !!!
+
+    IGCM_debug_PopStack "CPL_Finalize"
+}
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/opa9.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/opa9.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/opa9.card	(revision 1950)
@@ -0,0 +1,144 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+OPA_NPDT_JOURS=15
+ORCA_version=ORCA2.3
+io_xml=y
+io_server=n
+mesh_mask=n
+# OUTPUT_LEVEL=2 for standard daily outputs
+# OUTPUT_LEVEL=3 for more daily outputs
+OUTPUT_LEVEL=2
+
+[InitialStateFiles]
+List=	()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/ahmcoef, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/bathy_level.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/bathy_meter.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/coordinates.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_potential_temperature_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_salinity_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/geothermal_heating.nc, .),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/runoff_1m_nomask.nc, .),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/subbasins.nc, .),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/chlaseawifs_c1m-99-05_smooth_ORCA_R2.nc, chlorophyll.nc),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_chlorophyll_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/Tides_K1_drg_ORCA_R2.nc, K1rowdrg.nc),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/Tides_M2_drg_ORCA_R2.nc, M2rowdrg.nc),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/tmaskitf_ORCA2_bis.nc, mask_itf.nc),\
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/kRGB61.txt, .)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE}, namelist),       \
+        (${SUBMIT_DIR}/PARAM/iodef.xml,             iodef.xml),      \
+        (${SUBMIT_DIR}/PARAM/xmlio_server.def,      xmlio_server.def)
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart.nc,  restart.nc, restartopa.nc)
+
+[OutputText]
+List=   (ocean.output, oceanx.prt, solver.stat)
+
+[OutputFiles]
+List=   (mesh_mask.nc      , ${R_OUT_OCE_O}/${config_UserChoices_JobName}_mesh_mask.nc, NONE),\
+        (ORCA2_1m_scalar.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_scalar.nc, Post_1M_scalar),\
+        (ORCA2_1m_grid_T.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_T.nc, Post_1M_grid_T),\
+        (ORCA2_1m_grid_U.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_U.nc, Post_1M_grid_U),\
+        (ORCA2_1m_grid_V.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_V.nc, Post_1M_grid_V),\
+        (ORCA2_1m_grid_W.nc, ${R_OUT_OCE_O_M}/${PREFIX}_1M_grid_W.nc, Post_1M_grid_W),\
+        (ORCA2_1d_grid_T.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_T.nc, Post_1D_grid_T),\
+        (ORCA2_1d_grid_U.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_U.nc, Post_1D_grid_U),\
+        (ORCA2_1d_grid_V.nc, ${R_OUT_OCE_O_D}/${PREFIX}_1D_grid_V.nc, Post_1D_grid_V),\
+        (${PREFIX_NWRITE}_${DATE_OPA}_diaptr.nc, ${R_OUT_OCE_NWRITE}/${PREFIX}_${WF1}_diaptr.nc, Post_1M_diaptr),\
+        (damping.coeff.nc , ${R_OUT_OCE_O_D}/${PREFIX}_damping.coeff.nc, NONE),\
+        (output.abort.nc  , ${R_OUT_OCE_D}/${PREFIX}_output.abort.nc, NONE),\
+        (output.init.nc   , ${R_OUT_OCE_O_I}/${config_UserChoices_JobName}_${PeriodDateBegin}_output.init.nc, NONE)
+
+[Post_1M_scalar]
+Patches = ()
+GatherWithInternal = (time_counter, time_counter_bnds)
+TimeSeriesVars2D = (masso, volo, zosga, zossga, zostoga, thetaoga, soga)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=OFF
+
+[Post_1M_grid_T]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (evs, ficeberg, friver, fsitherm, hfcorr, hfevapds, hfibthermds, hfrainds, hfrunoffds, hfsithermds, hfsnthermds, nshfls, omlmax, pbo, pr, prsn, sfdsi, so20chgt, so28chgt, sohefldo, sohtc300, soicecov, somixhgt, somxl010, sosaline, soshfldo, sossheig, sosstsst, sotaumod, sowaflcd, sowaflup, sowindsp, tossq, vsfsit, wfcorr, zossq)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (rhopoto, rsds, thkcello, vosaline,votemper)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_grid_U]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, depthu, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (hfx, hfxba, hfxdiff, sozotaux)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (umo, vozocrtx,vozoeivu)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_grid_V]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, depthv, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (hfy, hfyba, hfydiff, sometauy)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (vmo, vomecrty, vomeeivv)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_grid_W]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, depthw, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (soleaeiw, soleahtw)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (difvmo, difvmto, difvtrto, voddmavs, voveeivw, votkeavt, vovecrtz, wmo, wmosq)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_diaptr]
+Patches = ()
+GatherWithInternal = (lat, deptht, depthw, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (zotemglo, zosalglo, zomsfglo, zotematl, zosalatl, zomsfatl, zotempac, zosalpac, zomsfpac, zotemind, zosalind, zomsfind, zotemipc, zosalipc, zomsfipc, sohtatl, sostatl, sohtpac, sostpac, sohtind, sostind, sohtipc, sostipc, sophtadv, sophtove, sophtldf, sopstadv, sopstove, zomsfeiv, sophteiv, sopsteiv)
+ChunckJob2D = NONE
+TimeSeriesVars3D = ()
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1D_grid_T]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (omldamax, sosstsst, tossq)
+ChunckJob2D = 200Y
+TimeSeriesVars3D = (vosaline,votemper)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_U]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 200Y
+TimeSeriesVars3D = (vozocrtx)
+ChunckJob3D = OFF
+Seasonal=OFF
+
+[Post_1D_grid_V]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = 200Y
+TimeSeriesVars3D = (vomecrty)
+ChunckJob3D = OFF
+Seasonal=OFF
+
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/opa9.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/opa9.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/opa9.driver	(revision 1950)
@@ -0,0 +1,245 @@
+#!/bin/ksh
+#-----------------------------------------------------------------
+function OCE_Initialize
+{
+    IGCM_debug_PushStack "OCE_Initialize"
+
+    JOB_NAME=${config_UserChoices_JobName}
+    RESOL_OCE=$( echo $RESOL | awk "-Fx" '{print $1}' )
+
+    ORCA_NPDT_JOUR=${opa9_UserChoices_OPA_NPDT_JOURS:=15}
+
+    # Local function to find namelists parameters
+    supergrep () {
+ 	grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%"
+    }
+
+    ##--Variables used by OPA --
+
+    # cn_exp    experience name
+    # nn_it000  number of the first time step
+    # nn_itend  number of the last time step
+    # nn_date0  initial calendar date yymmdd (used if  nn_rstctl=1)
+    # nn_leapy  Leap year calendar (1) or not (0), or 360 days calendar (30)
+    # nn_stock  frequency of creation of a restart file (modulo referenced to 1)
+    # nn_write  frequency of write in the output file   (modulo referenced to nn_it000)
+    # ln_rstart start from rest (F) or from a restart file (T)
+    # nn_rstctl restart control = 0 nn_it000 is not compared to the restart file value
+    #                           = 1 use nn_date0 in namelist (not the value in the restart file)
+    #                           = 2 calendar parameters read in the restart file
+    # nn_msh    =1 create a mesh file (coordinates, scale factors, masks)
+    # rn_rdt    time step in seconds for the dynamics (and tracer if nacc=0)   ==> 5760 (coming from namelist)
+    # nn_prg    time-step frequency of gap print in model output
+    # nf_ptr_wri frequency of zonal means and transport output
+
+    PAT_CEXPER=$( supergrep cn_exp     ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NIT000=$( supergrep nn_it000   ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NITEND=$( supergrep nn_itend   ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NDATE0=$( supergrep nn_date0   ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NLEAPY=$( supergrep nn_leapy   ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NSTOCK=$( supergrep nn_stock   ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NWRITE=$( supergrep nn_write   ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_RESTAR=$( supergrep ln_rstart  ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NRSTAR=$( supergrep nn_rstctl  ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NMSH=$(   supergrep nn_msh     ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_PRG=$(    supergrep nn_prg     ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+    PAT_NF_PTR=$( supergrep nf_ptr_wri ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} )
+
+    ORCA_RDT=$(   supergrep rn_rdt     ${SUBMIT_DIR}/PARAM/namelist_${RESOL_OCE} | sed 's/ *rn_rdt *=//' | sed 's/\. *//' )
+
+    # Period Length In Days between DateBegin and first day of calendar 0001 01 01
+    # /!\ Needed by OPA namelist to compute file names /!\
+    (( DaysSinceJC = $( IGCM_date_DaysSinceJC ${DateBegin} ) + 1 ))
+
+    ##--Variables used for XMLIO_SERVER configuration file
+    # using_server: .TRUE.(.FALSE.) to use(bypass) the io_server
+    PAT_SERVER=$( supergrep using_server ${SUBMIT_DIR}/PARAM/xmlio_server.def )
+
+    IGCM_debug_PopStack "OCE_Initialize"
+}
+
+#-----------------------------------------------------------------
+function OCE_Update
+{
+    IGCM_debug_PushStack "OCE_Update"
+
+    ## This informations are used for diaptr, trends and diagap files
+    ## only the first frequency is used for this files
+
+    ##--Write Frequency Purpose ....
+    frequency=$( echo ${config_OCE_WriteFrequency} | awk "-F " '{print $1}' )
+    factor=$( echo ${frequency} | sed -e "s/[yYmMdD]//" )
+    case ${frequency} in
+	1Y|1y)
+	    (( ORCA_NWRITE = ORCA_NPDT_JOUR * factor * $( IGCM_date_DaysInYear  ${year} ) ))          ;
+	    PREFIX_NWRITE=${config_UserChoices_JobName}_${factor}y ;
+	    R_OUT_OCE_NWRITE=${R_OUT_OCE_O_Y} ;
+	    WF1=${factor}Y ;;
+	1M|1m)
+	    (( ORCA_NWRITE = ORCA_NPDT_JOUR * factor * $( IGCM_date_DaysInMonth ${year} ${month} ) )) ;
+	    PREFIX_NWRITE=${config_UserChoices_JobName}_${factor}m ;
+	    R_OUT_OCE_NWRITE=${R_OUT_OCE_O_M} ;
+	    WF1=${factor}M ;;
+	*D|*d)
+	    (( ORCA_NWRITE = ORCA_NPDT_JOUR * factor  ))  ;
+	    PREFIX_NWRITE=${config_UserChoices_JobName}_${factor}d ;
+	    R_OUT_OCE_NWRITE=${R_OUT_OCE_O_D} ;
+	    WF1=${factor}D ;;
+	*)
+	    (( ORCA_NWRITE = 0 ))                                                            ;;
+    esac
+
+    ##--Write Frequency for iomput
+    ## Differents frequencies are allowed for grid_[TUVW] and icemod files
+
+    V1D_ENABLE=".FALSE."
+    V5D_ENABLE=".FALSE."
+    V1M_ENABLE=".FALSE."
+    V1Y_ENABLE=".FALSE."
+
+    for frequency in ${config_OCE_WriteFrequency} ; do
+        case ${frequency} in
+            1D|1d) V1D_ENABLE=".TRUE." ;;
+        esac
+        case ${frequency} in
+            5D|5d) V5D_ENABLE=".TRUE." ;;
+        esac
+        case ${frequency} in
+            1M|1m) V1M_ENABLE=".TRUE." ;;
+        esac
+        case ${frequency} in
+            *[yY]) V1Y_ENABLE=".TRUE." ;;
+        esac
+    done
+
+
+    ##-- Output level : 3 for more 1D variables
+    eval opa9_OUTPUT_LEVEL=\${opa9_UserChoices_OUTPUT_LEVEL} > /dev/null 2>&1
+    OUTPUT_LEVEL=${opa9_OUTPUT_LEVEL}
+
+
+    # Period Length In Days between DateBegin and first day of calendar 0001 01 01
+    # Needed by OPA namelist to compute correct file names 
+    (( PeriodDaysSinceJC =  $( IGCM_date_DaysSinceJC ${PeriodDateBegin} ) + 1  ))
+
+    ##-- Number of time steps updated : the first, the last and the number of time steps
+    (( ORCA_NIT000 = ( PeriodDaysSinceJC - DaysSinceJC ) * ORCA_NPDT_JOUR + 1 ))
+    (( ORCA_NPDT   = PeriodLengthInDays * ORCA_NPDT_JOUR ))
+    (( ORCA_NITEND = ORCA_NIT000 + ORCA_NPDT - 1))
+
+    ##-- We force one restart file at the end of the trunk
+    ORCA_NSTOCK="${ORCA_NITEND}"
+
+    ##-- Let verify the number of time steps per day
+    (( NB_SEC_JOUR_MODEL = ORCA_NPDT_JOUR * ORCA_RDT ))
+    (( NB_SEC_JOUR = 60 * 60 * 24 ))
+
+    if [ ${NB_SEC_JOUR_MODEL} -ne ${NB_SEC_JOUR} ] ; then
+        echo " VERIFY ORCA_NPDT_JOUR in opa9.card "
+        exit
+    fi
+
+    ##-- Restart configuration
+    if ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_OCE_Restart}" = "n" ] ) ; then
+	ORCA_LRSTAR=.FALSE.
+	ORCA_NRSTDT=0
+        # Put ORCA_NMSH=0 when OPA running in parallel mode
+	ORCA_NMSH=1
+	#echo "NO OPA RESTART"
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_OCE_Restart}" = "y" ] ) ; then
+	ORCA_LRSTAR=.TRUE.
+	ORCA_NRSTDT=0
+	ORCA_NMSH=1
+	#echo "OPA RESTART"
+    else
+	ORCA_LRSTAR=.TRUE.
+	ORCA_NRSTDT=2
+	ORCA_NMSH=0
+	#echo "OPA RESTART"
+    fi
+
+    ##-- Meshmask option
+    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices mesh_mask
+
+    if [ "${opa9_UserChoices_mesh_mask}" = "y" ]; then
+        ORCA_NMSH=1
+        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/opa9.card UserChoices mesh_mask "n"
+    fi
+
+    # nleapy configuration
+    case ${config_UserChoices_CalendarType} in
+        leap|gregorian)
+            ORCA_NLEAPY=1;;
+        noleap)
+            ORCA_NLEAPY=0;;
+        360d)
+            ORCA_NLEAPY=30;;
+        *)
+            ORCA_NLEAPY=30
+    esac
+
+    typeset -r PRECIS=8
+    NEMO_END=$( echo $( awk "BEGIN { printf \"%0${PRECIS}d\",${ORCA_NITEND} }" ) ) 
+
+
+    sed -e "s/${PAT_CEXPER}/       cn_exp=\"${config_UserChoices_JobName}\"/" \
+	-e "s/${PAT_NIT000}/       nn_it000=${ORCA_NIT000}/"                    \
+	-e "s/${PAT_NITEND}/       nn_itend=${ORCA_NITEND}/"                    \
+	-e "s/${PAT_NDATE0}/       nn_date0=${PeriodDateBegin}/"                \
+        -e "s%${PAT_NLEAPY}%       nn_leapy=${ORCA_NLEAPY}%"                    \
+	-e "s/${PAT_NSTOCK}/       nn_stock=${ORCA_NSTOCK}/"                    \
+	-e "s/${PAT_NWRITE}/       nn_write=${ORCA_NWRITE}/"                    \
+	-e "s/${PAT_RESTAR}/       ln_rstart=${ORCA_LRSTAR}/"                 \
+	-e "s/${PAT_NRSTAR}/       nn_rstctl=${ORCA_NRSTDT}/"                    \
+	-e "s/${PAT_NMSH}/         nn_msh=${ORCA_NMSH}/"                        \
+	-e "s/${PAT_NPRG}/         nn_prg=${ORCA_NWRITE}/"                      \
+	-e "s/${PAT_NF_PTR}/       nf_ptr_wri=${ORCA_NWRITE}/"                \
+	namelist > namelist.tmp
+
+    IGCM_sys_Mv namelist.tmp namelist
+
+    echo 'Variables automatically updated in ORCA namelist'
+    grep AUTO namelist
+
+    # update iodef.xml
+
+    echo 'Informations into iodef.xml : V1D_ENABLE V5D_ENABLE V1M_ENABLE V1Y_ENABLE OUTPUT_LEVEL'
+    echo ${V1D_ENABLE} ${V5D_ENABLE} ${V1M_ENABLE} ${V1Y_ENABLE} ${OUTPUT_LEVEL}
+
+    sed -e "s/<1D_ENABLE>/${V1D_ENABLE}/" \
+        -e "s/<5D_ENABLE>/${V5D_ENABLE}/" \
+        -e "s/<1M_ENABLE>/${V1M_ENABLE}/" \
+        -e "s/<1Y_ENABLE>/${V1Y_ENABLE}/" \
+        -e "s/<OUTPUT_LEVEL>/${OUTPUT_LEVEL}/" \
+        iodef.xml > iodef.xml.tmp
+
+    IGCM_sys_Mv iodef.xml.tmp iodef.xml
+
+    # update xmlio_server.def
+
+    if [ X${opa9_UserChoices_io_server} = Xy ] ; then
+        sed -e "s/${PAT_SERVER}/  using_server = .TRUE./" \
+        xmlio_server.def > xmlio_server.def.tmp
+        IGCM_sys_Mv xmlio_server.def.tmp xmlio_server.def
+    fi
+
+    IGCM_debug_PopStack "OCE_Update"
+}
+
+#-----------------------------------
+function OCE_Finalize
+{
+    IGCM_debug_PushStack "OCE_Finalize"
+
+    if [ -f date.file ] ; then
+        # Prefix use in opa9.card AND in lim2.card :
+	DATE_OPA=$( cat date.file | \
+	    sed "s/\ ${config_UserChoices_JobName}_[0-9]*[a-z]_\([0-9]*_[0-9]*\)_\ */\1/g" )
+	MainPrefix=${config_UserChoices_JobName}_1d_${DATE_OPA}
+	SecondPrefix=${config_UserChoices_JobName}_5d_${DATE_OPA}
+    fi
+
+    echo FINALIZE OCE !!!
+
+    IGCM_debug_PopStack "OCE_Finalize"
+}
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/orchidee.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/orchidee.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/orchidee.card	(revision 1950)
@@ -0,0 +1,51 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+NEWHYDROL=n
+sechiba_LEVEL=11
+
+[InitialStateFiles]
+List=	(${R_INIT}/SRF/${config_UserChoices_TagName}/soils_param.nc,      . ), \
+	(${R_INIT}/SRF/${config_UserChoices_TagName}/routing.nc,          . ), \
+	(${R_INIT}/SRF/${config_UserChoices_TagName}/PFTmap_IPCC_1850.nc, PFTmap.nc)
+
+[BoundaryFiles]
+List=	()
+ListNonDel= ()
+
+[SmoothFiles]
+List=()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/orchidee.def, .)
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List=	(sechiba_rest_out.nc, sechiba_rest.nc, sechiba_rest_in.nc)
+
+[OutputText]
+List=   (out_orchidee)
+
+[OutputFiles]
+List=	(sechiba_history.nc, ${R_OUT_SRF_O_M}/${PREFIX}_1M_sechiba_history.nc, Post_1M_sechiba_history), \
+        (sechiba_out_2.nc, ${R_OUT_SRF_O_H}/${PREFIX}_HF_sechiba_out_2.nc, Post_HF_sechiba_out_2), \
+        (orchidee_watchout.nc, ${R_OUT_SRF_O_M}/${PREFIX}_1M_watchout.nc, NONE)
+
+[Post_1M_sechiba_history]
+Patches = ()
+GatherWithInternal = (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac)
+TimeSeriesVars2D = (nobiofrac, alb_nir, alb_vis, bqsb, evap, fluxlat, fluxsens, gqsb, netrad, qair, rain, runoff, snow, snownobio, snowf, subli, tair, temp_sol, tsol_max, tsol_min, drainage,mrsos, mrso, mrros, mrro, prveg, evspsblveg, evspsblsoi, tran, treeFrac, grassFrac, cropFrac, baresoilFrac, residualFrac)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (lai, maxvegetfrac, vegetfrac, CO2FLUX, ptn, nee)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_HF_sechiba_out_2]
+Patches= ()
+GatherWithInternal= (lon, lat, veget, time_counter, time_counter_bnds, Areas, Contfrac)
+TimeSeriesVars2D= (mrsos, mrro)
+ChunckJob2D= 50Y
+TimeSeriesVars3D= (ptn)
+ChunckJob3D= 10Y
+Seasonal= OFF
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/orchidee.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/orchidee.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/orchidee.driver	(revision 1950)
@@ -0,0 +1,120 @@
+#!/bin/ksh
+
+#D- Driver du script pour ORCHIDEE
+
+function ORCHIDEE_sed
+{
+    IGCM_debug_PushStack "ORCHIDEE_sed"
+    
+    sed -e "s/^${1}\ *=.*/${1}= ${2}/" \
+	orchidee.def > orchidee.def.tmp
+    RET=$?
+    echo "ORCHIDEE_sed : ${1} ${2}"
+    \mv orchidee.def.tmp orchidee.def
+    
+    IGCM_debug_PopStack "ORCHIDEE_sed"
+    return $RET
+}
+
+#-----------------------------------------------------------------
+function SRF_Initialize
+{
+    IGCM_debug_PushStack "SRF_Initialize"
+
+    RESOL_SRF=ALL
+
+    for frequency in ${config_SRF_WriteFrequency} ; do
+        case ${frequency} in
+            HF|hf) SRF_ok_hf=y ;;
+        esac
+    done
+
+    IGCM_debug_PopStack "SRF_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SRF_Update
+{
+    IGCM_debug_PushStack "SRF_Update"
+
+    typeset SECHIBA_WRITE_STEP
+
+    SRF_WriteFrequency=$( echo ${config_SRF_WriteFrequency} | sed -e 's/\([0-9]*[yYmMdDs]\).*/\1/' ) 
+    case ${SRF_WriteFrequency} in
+	*Y|*y) 
+	    WriteInYears=$( echo ${SRF_WriteFrequency} | awk -F '[yY]' '{print $1}' )
+	    PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+	    (( SECHIBA_WRITE_STEP = PeriodLengthInDays * WriteInYears / PeriodLengthInYears * 86400 )) ;;
+	1M)
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		SECHIBA_WRITE_STEP=-1.
+		;;
+	    *M|*m)
+		SECHIBA_WRITE_STEP=-1.
+		;;
+	    *)
+		(( SECHIBA_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) * 86400 ))
+		;;
+	    esac
+	    ;;
+	*M|*m) 
+	    WriteInMonths=$( echo ${SRF_WriteFrequency} | awk -F '[mM]' '{print $1}' )
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+		(( SECHIBA_WRITE_STEP = PeriodLengthInDays * 86400 / PeriodLengthInYears / 12  ))
+		;;
+	    *M|*m)
+		PeriodLengthInMonths=$( echo ${config_UserChoices_PeriodLength} | awk -F '[mM]' '{print $1}' )
+		(( SECHIBA_WRITE_STEP = PeriodLengthInDays * WriteInMonths  * 86400 / PeriodLengthInMonths  ))
+		;;
+	    *)
+		(( SECHIBA_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) * 86400 ))
+		;;
+	    esac
+	    ;;
+	5D|5d) 
+	    (( SECHIBA_WRITE_STEP = 5 * 86400 )) ;;
+	1D|1d) 
+	    (( SECHIBA_WRITE_STEP = 86400 )) ;;
+	*s)
+	    WriteInSeconds=$( echo ${SRF_WriteFrequency} | awk -F '[s]' '{print $1}' )
+	    (( SECHIBA_WRITE_STEP = WriteInSeconds )) ;;
+	*) 
+	    IGCM_debug_Exit "SRF_Update " ${SRF_WriteFrequency} " invalid WriteFrequency : choose in 1Y, 1M, 5D, 1D." 
+	    IGCM_debug_Verif_Exit ;;
+    esac
+
+    ORCHIDEE_sed HYDROL_CWRR ${orchidee_UserChoices_NEWHYDROL}
+
+    ORCHIDEE_sed WRITE_STEP ${SECHIBA_WRITE_STEP}
+    ORCHIDEE_sed SECHIBA_HISTLEVEL ${orchidee_UserChoices_sechiba_LEVEL}
+
+    # Outputs HF in HISTFILE2 if required
+    [ X${SRF_ok_hf} = Xy ] && ORCHIDEE_sed SECHIBA_HISTFILE2 y
+
+    ORCHIDEE_sed SECHIBA_HISTLEVEL2 1
+    ORCHIDEE_sed WRITE_STEP2 10800.0
+
+    if ( [ ${CumulPeriod} -ne 1 ] || [ "${config_SRF_Restart}" != "n" ] ) ; then
+	ORCHIDEE_sed SECHIBA_restart_in sechiba_rest_in.nc
+    fi
+
+    #IGCM_sys_Cp ${RUN_DIR}/orchidee.def ${RUN_DIR}/run.def
+    #IGCM_sys_Put_Out ${RUN_DIR}/run.def ${R_SAVE}/${PREFIX}_run.def
+
+    IGCM_debug_PopStack "SRF_Update"
+}
+
+#-----------------------------------------------------------------
+function SRF_Finalize
+{
+    IGCM_debug_PushStack "SRF_Finalize"
+
+    #IGCM_sys_Put_Out ${RUN_DIR}/used_run.def ${R_SAVE}/${PREFIX}_used_run.def
+
+    echo FINALIZE SRF !!!
+
+    IGCM_debug_PopStack "SRF_Finalize"
+}
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/pisces.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/pisces.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/pisces.card	(revision 1950)
@@ -0,0 +1,67 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+
+[InitialStateFiles]
+List= ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_DIC_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_Alkalini_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_O2_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_NO3_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_PO4_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_Si_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_DOC_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/data_1m_Fer_nomask.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/dust.orca.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/bathy.orca.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/river.orca.nc, .), \
+            (${R_BC}/OCE/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}/ndeposition.orca.nc, .)
+
+[SmoothFiles]
+List=  ()
+
+[ParametersFiles]
+List=	(${SUBMIT_DIR}/PARAM/namelist_top_${RESOL_OCE}, namelist_top), \
+        (${SUBMIT_DIR}/PARAM/namelist_pisces_${RESOL_OCE}, namelist_pisces)
+
+[RestartFiles]
+List=	(${config_UserChoices_JobName}_${NEMO_END}_restart_trc.nc,  restart_trc.nc, restart_trc.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=   (ORCA2_1m_ptrc_T.nc, ${R_OUT_MBG_O_M}/${PREFIX}_1M_ptrc_T.nc, Post_1M_ptrc_T), \
+        (ORCA2_1m_diad_T.nc, ${R_OUT_MBG_O_M}/${PREFIX}_1M_diad_T.nc, Post_1M_diad_T), \
+        (ORCA2_1m_dbio_T.nc, ${R_OUT_MBG_O_M}/${PREFIX}_1M_dbio_T.nc, Post_1M_dbio_T)
+
+[Post_1M_ptrc_T]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_counter_bnds)
+TimeSeriesVars2D = ()
+ChunckJob2D = OFF
+TimeSeriesVars3D = (Alkalini, BFe, BSi, CaCO3, DCHL, DFe, DIC, DOC, DSi, Fer, GOC, NCHL, NFe, NH4, NO3, O2, PHY, PHY2, PO4, POC, SFe, Si, ZOO, ZOO2)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_diad_T]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (Cflx, Dpco2, Dpo2, EPC100, EPCAL100, EPFE100, EPSI100, Heup, Irondep, Kg, Nfix, Oflx)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CO3, CO3sat, DCAL, GRAZ, PAR, PBSi, PCAL, PFeD, PFeN, PH, PPNEWD, PPNEWN, PPPHY, PPPHY2)
+ChunckJob3D = 50Y
+Seasonal=ON
+
+[Post_1M_dbio_T]
+Patches = (Patch_20091118_mask)
+GatherWithInternal = (nav_lon, nav_lat, deptht, time_counter, time_counter_bnds)
+TimeSeriesVars2D = (INTDIC, INTNFIX, INTPBFE, INTPBSI, INTPCAL, INTPNEW, INTPP, INTPPPHY, INTPPPHY2, O2MIN, ZO2MIN )
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CHLT, EXPC, EXPCAL, EXPFE, EXPSI, PFET, PHYT, POCT, TPBFE, TPNEW, TPP, ZOOT)
+ChunckJob3D = 50Y
+Seasonal=ON
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/pisces.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/pisces.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/pisces.driver	(revision 1950)
@@ -0,0 +1,88 @@
+#!/bin/ksh
+
+#-----------------------------------
+function MBG_Initialize
+{ 
+    IGCM_debug_PushStack "MBG_Initialize"
+
+# Local function to find namelists parameters
+supergrep () {
+    grep "^ *$1 *=" $2 | sed -e "s% *\!.*%%"
+}
+
+    ##--Variables used by OPA --
+
+
+    ##--Variables used by MBG --
+
+    # ln_rsttr  boolean term for tracer model restart (true or false)
+    # nrsttr    control of the time step (0, 1 or 2)
+    
+    ##--Variables used by PISCES --
+ 
+    PAT_TOP_LRSTTR=$( supergrep ln_rsttr          ${SUBMIT_DIR}/PARAM/namelist_top_${RESOL_OCE} )
+    PAT_TOP_NRSTTR=$( supergrep nrsttr            ${SUBMIT_DIR}/PARAM/namelist_top_${RESOL_OCE} )
+    PAT_PIS_LRIVER=$( supergrep ln_river          ${SUBMIT_DIR}/PARAM/namelist_pisces_${RESOL_OCE} )
+
+    IGCM_debug_PopStack "MBG_Initialize"
+}
+
+#-----------------------------------
+function MBG_Update
+{
+    IGCM_debug_PushStack "MBG_Update"
+
+    ##-- Restart configuration
+    if ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_MBG_Restart}" = "n" ] ) ; then
+
+        #echo "NO RESTART FOR TOP"
+        TOP_LRSTTR=.FALSE.
+        TOP_NRSTTR=0
+
+        PISCES_LRIVER=.FALSE.
+
+    elif ( [ "${CumulPeriod}" -eq 1 ] && [ "${config_MBG_Restart}" = "y" ] ) ; then
+
+        #echo "RESTART TOP"
+        TOP_LRSTTR=.TRUE.
+        TOP_NRSTTR=0
+
+        PISCES_LRIVER=.TRUE.
+
+    else
+
+        #echo "RESTART TOP"
+        TOP_LRSTTR=.TRUE.
+        TOP_NRSTTR=2
+
+        PISCES_LRIVER=.TRUE.
+
+    fi
+
+    ##-- Update namelist_top and namelist_pisces 
+
+    sed -e "s%${PAT_TOP_LRSTTR}%          ln_rsttr=${TOP_LRSTTR}%"                   \
+        -e "s%${PAT_TOP_NRSTTR}%          nrsttr=${TOP_NRSTTR}%"                   \
+        namelist_top > namelist_top.tmp
+
+    IGCM_sys_Mv namelist_top.tmp namelist_top
+
+    sed -e "s%${PAT_PIS_LRIVER}%          ln_river=${PISCES_LRIVER}%"                \
+        namelist_pisces > namelist_pisces.tmp
+
+    IGCM_sys_Mv namelist_pisces.tmp namelist_pisces
+
+
+    IGCM_debug_PopStack "MBG_Update"
+}
+
+#-----------------------------------
+function MBG_Finalize
+{
+    IGCM_debug_PushStack "MBG_Finalize"
+
+    echo FINALIZE MBG !!!
+
+    IGCM_debug_PopStack "MBG_Finalize"
+}
+
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/stomate.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/stomate.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/stomate.card	(revision 1950)
@@ -0,0 +1,47 @@
+[Compatibility]
+libIGCM=1.0
+
+[UserChoices]
+stomate_LEVEL=10
+
+[InitialStateFiles]
+List=   ()
+
+[BoundaryFiles]
+List=	()
+ListNonDel= (${R_BC}/SRF/${config_UserChoices_TagName}/reftemp.nc, .)
+
+[SmoothFiles]
+List=	()
+
+[ParametersFiles]
+List=   ()
+
+[RestartFiles]
+# List restart that have to be saved/restored each loop (file out, saved, and in) :
+List=	(stomate_rest_out.nc, stomate_rest.nc, stomate_rest_in.nc)
+
+[OutputText]
+List=   ()
+
+[OutputFiles]
+List=	(stomate_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_history.nc, Post_1M_stomate_history) \
+    (stomate_ipcc_history.nc, ${R_OUT_SBG_O_M}/${PREFIX}_1M_stomate_ipcc_history.nc, Post_1M_stomate_ipcc_history)
+
+[Post_1M_stomate_history]
+Patches= ()
+GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bnds, Areas)
+TimeSeriesVars2D= (T2M_MONTH,CONTFRAC,RESOLUTION_X,RESOLUTION_Y,CONVFLUX,CFLUX_PROD10,CFLUX_PROD100,HARVEST_ABOVE)
+ChunckJob2D = NONE
+TimeSeriesVars3D = (CO2FLUX_MONTHLY,LAI,VEGET,VEGET_MAX,NPP,GPP,HET_RESP,MAINT_RESP,GROWTH_RESP,AGE,HEIGHT,TOTAL_M,TOTAL_BM_LITTER,TOTAL_SOIL_CARB,CO2_FIRE)
+ChunckJob3D = NONE
+Seasonal=ON
+
+[Post_1M_stomate_ipcc_history]
+Patches= ()
+GatherWithInternal= (lon, lat, PFT, time_counter, time_counter_bnds, Areas, CONTFRAC)
+TimeSeriesVars2D=(cVeg, cLitter, cSoil, cProduct, lai, gpp, ra, npp, rh, fFire, fHarvest, fLuc, nbp, fVegLitter, fLitterSoil, cLeaf, cWood, cRoot, cMisc, cLitterAbove, cLitterBelow, cSoilFast, cSoilMedium, cSoilSlow, landCoverFrac, treeFracPrimDec, treeFracPrimEver, c3PftFrac, c4PftFrac, rGrowth, rMaint, nppLeaf, nppWood, nppRoot, nep)
+ChunckJob2D = NONE
+TimeSeriesVars3D=()
+ChunckJob3D = NONE
+Seasonal=ON
Index: /CMIP5/historicalAA/v3.historicalAA1/COMP/stomate.driver
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/COMP/stomate.driver	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/COMP/stomate.driver	(revision 1950)
@@ -0,0 +1,94 @@
+#!/bin/ksh
+
+#D- Driver du script pour ORCHIDEE
+
+#-----------------------------------------------------------------
+function SBG_Initialize
+{
+    IGCM_debug_PushStack "SBG_Initialize"
+
+    RESOL_SBG=ALL
+    
+    IGCM_debug_PopStack "SBG_Initialize"
+}
+
+#-----------------------------------------------------------------
+function SBG_Update
+{
+    IGCM_debug_PushStack "SBG_Update"
+
+    typeset STOMATE_WRITE_STEP
+
+    case ${config_SBG_WriteFrequency} in
+	*Y|*y) 
+	    WriteInYears=$( echo ${config_SBG_WriteFrequency} | awk -F '[yY]' '{print $1}' )
+	    PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+	    (( STOMATE_WRITE_STEP = PeriodLengthInDays * WriteInYears / PeriodLengthInYears )) ;;
+	1M|1m) 
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		STOMATE_WRITE_STEP=-1.
+		;;
+	    *M|*m)
+		STOMATE_WRITE_STEP=-1.
+		;;
+	    *)
+		(( STOMATE_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) )) ;;
+	    esac
+	    ;;
+	*M|*m) 
+	    WriteInMonths=$( echo ${config_SBG_WriteFrequency} | awk -F '[mM]' '{print $1}' )
+	    case ${config_UserChoices_PeriodLength} in
+	    *Y|*y)
+		PeriodLengthInYears=$( echo ${config_UserChoices_PeriodLength} | awk -F '[yY]' '{print $1}' )
+		(( STOMATE_WRITE_STEP = 30 ))
+		;;
+	    *M|*m)
+		PeriodLengthInMonths=$( echo ${config_UserChoices_PeriodLength} | awk -F '[mM]' '{print $1}' )
+		(( STOMATE_WRITE_STEP = PeriodLengthInDays * WriteInMonths / PeriodLengthInMonths ))
+		;;
+	    *)
+		(( STOMATE_WRITE_STEP = $( IGCM_date_DaysInMonth $year $month ) )) ;;
+	    esac
+	    ;;
+	5D|5d) 
+	    (( STOMATE_WRITE_STEP = 5 )) ;;
+	1D|1d) 
+	    (( STOMATE_WRITE_STEP = 1 )) ;;
+	*s)
+	    WriteInSeconds=$( echo ${config_SBG_WriteFrequency} | awk -F '[s]' '{print $1}' )
+	    (( STOMATE_WRITE_STEP = 1 )) ;;
+	*) 
+	    IGCM_debug_Exit "SBG_Update " ${config_SBG_WriteFrequency} " invalid WriteFrequency : choose in 1Y, 1M, 5D, 1D." 
+	    IGCM_debug_Verif_Exit ;;
+    esac
+
+    ORCHIDEE_sed STOMATE_OK_STOMATE y
+
+    ORCHIDEE_sed STOMATE_HIST_DT ${STOMATE_WRITE_STEP}
+    ORCHIDEE_sed STOMATE_HISTLEVEL ${stomate_UserChoices_stomate_LEVEL}
+
+    if ( [ ${CumulPeriod} -eq 1 ] && [ "${config_SBG_Restart}" = "n" ] ) ; then
+	echo "STOMATE : without restart"
+    else
+	ORCHIDEE_sed STOMATE_RESTART_FILEIN stomate_rest_in.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Update"
+}
+
+#-----------------------------------------------------------------
+function SBG_Finalize
+{
+#set -vx
+    IGCM_debug_PushStack "SBG_Finalize"
+
+    if [ $( IGCM_date_DaysBetweenGregorianDate ${PeriodDateEnd} ${year}1230 ) -ge 0 ] ; then
+	IGCM_sys_Put_Out stomate_Cforcing.nc ${R_OUT_SBG_R}/${config_UserChoices_JobName}_${PeriodDateEnd}_stomate_Cforcing.nc
+	IGCM_sys_Put_Out stomate_forcing.nc  ${R_OUT_SBG_R}/${config_UserChoices_JobName}_${PeriodDateEnd}_stomate_forcing.nc
+# 	rm -f stomate_Cforcing.nc
+# 	rm -f stomate_forcing.nc
+    fi
+
+    IGCM_debug_PopStack "SBG_Finalize"
+}
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/cf_name_table.txt
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/cf_name_table.txt	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/cf_name_table.txt	(revision 1950)
@@ -0,0 +1,426 @@
+# Maximum index of the table entries, total number of indices
+466 423
+#Index, CF longname, unit
+ 1  'sea_surface_temperature' 'K'
+ 2  'sea_ice_extent' 'm2'
+ 3  'upward_grid_eastward_stress_at_sea_ice_base' 'Pa'
+ 4  'upward_grid_northward_stress_at_sea_ice_base' 'Pa'
+ 5  'surface_downward_heat_flux' 'W m-2'
+ 6  'surface_downward_non_shortwave_heat_flux' 'W m-2'
+ 7  'surface_net_downward_shortwave_flux' 'W m-2'
+ 8  'surface_downward_latent_heat_flux' 'W m-2'
+ 9  'surface_downward_sensible_heat_flux' 'W m-2'
+ 10  'surface_net_downward_longwave_flux' 'W m-2'
+ 11  'surface_net_downward_direct_shortwave_flux' 'W m-2'
+ 12  'surface_net_downward_diffusive_shortwave_flux' 'W m-2'
+ 13  'surface_upwelling_downward_shortwave_flux' 'W m-2'
+ 14  'surface_upwelling_downward_longwave_flux' 'W m-2'
+ 15  'surface_downwelling_downward_longwave_flux' 'W m-2'
+ 16  'surface_emissivity' '1'
+ 17  'surface_albedo' '1'
+ 18  'surface_snow_area_fraction' '1'
+ 19  'lower_level_air_temperature' 'K'
+ 20  'lower_level_wind_module' 'Pa'
+ 21  'lower_level_geopotential' 'm2 s-2'
+ 22  'lower_level_specific_humidity' '1'
+ 23  'surface_downward_grid_eastward_stress' 'Pa'
+ 24  'surface_downward_grid_northward_stress' 'Pa'
+ 25  'water_evaporation_flux' '1'
+ 26  'surface_precipitation_flux' 'kg m-2 s-1'
+ 27  'rainfall_flux' 'kg m-2 s-1'
+ 28  'snow_fall_flux' 'kg m-2 s-1'
+ 29  'water_flux_into_ocean' 'kg m-2 s-1'
+ 30  'surface_downward_water_flux' 'kg m-2 s-1'
+ 31  'sea_ice_area_fraction' '1'
+ 32  'water_flux_into_ocean_from_rivers' 'kg m-2 s-1'
+ 33  'surface_air_pressure' 'Pa'
+ 34  'surface_temperature' 'K'
+ 35  'surface_downward_non_shortwave_heat_flux_derivative' 'W m-2'
+ 36  'water_flux_into_ocean_from_ice_sheet' 'kg m-2 s-1'
+ 37  'surface_energy_flux_into_ocean_due_to_wind_mixing' 'W m-2'
+ 38  'surface_net_downward_shortwave_flux' 'W m-2'
+ 39  'surface_downward_non_penetrative_heat_flux' 'W m-2'
+ 40  'snow_fall_flux' 'kg m-2 s-1'
+ 41  'water_evaporation_flux_where_sea_ice' 'kg m-2 s-1'
+ 42  'downward_heat_flux_in_sea_ice' 'W m-2'
+ 43  'surface_melt_heat_flux' 'W m-2'
+ 44  'sea_ice_area_fraction' '1'
+ 45  'sea_ice_thickness' '1'
+ 46  'lwe_snow_thickness_where_sea_ice' 'm'
+ 47  'surface_grid_eastward_sea_water_velocity' 'm s-1'
+ 48  'surface_grid_northward_sea_water_velocity' 'm s-1'
+ 49  'chemical concentration' '1e-6'
+ 50  'surface_downward_grid_eastward_stress_where_open_sea' 'Pa'
+ 51  'surface_downward_grid_northward_stress_where_open_sea' 'Pa'
+ 52  'surface_downward_grid_eastward_stress_where_sea_ice' 'Pa'
+ 53  'surface_downward_grid_northward_stress_where_sea_ice' 'Pa'
+ 54  'lower_level_relative_humidity' '1'
+ 55  'lwe_surface_downward_snow_flux_where_sea_ice' 'kg m-2 s-1'
+ 56  'wind_speed_at_10m' 'm s-1'
+ 100  'air_density' 'kg m-3'
+ 101  'air_potential_temperature' 'K'
+ 102  'air_pressure' 'Pa'
+ 103  'air_pressure_anomaly' 'Pa'
+ 104  'air_pressure_at_cloud_base' 'Pa'
+ 105  'air_pressure_at_cloud_top' 'Pa'
+ 106  'air_pressure_at_convective_cloud_base' 'Pa'
+ 107  'air_pressure_at_convective_cloud_top' 'Pa'
+ 108  'air_pressure_at_freezing_level' 'Pa'
+ 109  'air_pressure_at_sea_level' 'Pa'
+ 110  'air_temperature' 'K'
+ 111  'air_temperature_anomaly' 'K'
+ 112  'air_temperature_lapse_rate' 'K m-1'
+ 113  'altitude' 'm'
+ 114  'area_fraction_below_surface' '1'
+ 115  'atmosphere_absolute_vorticity' 's-1'
+ 116  'atmosphere_boundary_layer_thickness' 'm'
+ 117  'atmosphere_cloud_condensed_water_content' 'kg m-2'
+ 118  'atmosphere_cloud_ice_content' 'kg m-2'
+ 119  'atmosphere_cloud_liquid_water_content' 'kg m-2'
+ 120  'atmosphere_eastward_stress_due_to_gravity_wave_drag' 'Pa'
+ 121  'atmosphere_energy_content' 'J m-2'
+ 122  'atmosphere_horizontal_streamfunction' 'm2 s-1'
+ 123  'atmosphere_horizontal_velocity_potential' 'm2 s-1'
+ 124  'atmosphere_hybrid_height_coordinate' 'm'
+ 125  'atmosphere_hybrid_sigma_pressure_coordinate' '1'
+ 126  'atmosphere_kinetic_energy_content' 'J m-2'
+ 127  'atmosphere_northward_stress_due_to_gravity_wave_drag' 'Pa'
+ 128  'atmosphere_relative_vorticity' 's-1'
+ 129  'atmosphere_sigma_coordinate' '1'
+ 130  'atmosphere_so4_content' 'kg m-2'
+ 131  'atmosphere_surface_drag_coefficient' '1'
+ 132  'atmosphere_water_content' 'kg m-2'
+ 133  'atmosphere_water_vapor_content' 'kg m-2'
+ 134  'baroclinic_eastward_sea_water_velocity' 'm s-1'
+ 135  'baroclinic_northward_sea_water_velocity' 'm s-1'
+ 136  'barotropic_eastward_sea_water_velocity' 'm s-1'
+ 137  'barotropic_northward_sea_water_velocity' 'm s-1'
+ 138  'brightness_temperature' 'K'
+ 139  'brunt_vaisala_frequency_in_air' 's-1'
+ 140  'canopy_height' 'm'
+ 141  'canopy_water_amount' 'kg m-2'
+ 142  'chlorophyll_concentration_in_sea_water' 'kg m-3'
+ 143  'cloud_area_fraction' '1'
+ 144  'cloud_area_fraction_in_atmosphere_layer' '1'
+ 145  'cloud_base_altitude' 'm'
+ 146  'cloud_condensed_water_content_of_atmosphere_layer' 'kg m-2'
+ 147  'cloud_ice_content_of_atmosphere_layer' 'kg m-2'
+ 148  'cloud_liquid_water_content_of_atmosphere_layer' 'kg m-2'
+ 149  'cloud_top_altitude' 'm'
+ 150  'convective_cloud_area_fraction' '1'
+ 151  'convective_precipitation_amount' 'kg m-2'
+ 152  'convective_precipitation_flux' 'kg m-2 s-1'
+ 153  'convective_rainfall_amount' 'kg m-2'
+ 154  'convective_rainfall_flux' 'kg m-2 s-1'
+ 155  'convective_rainfall_rate' 'm s-1'
+ 156  'convective_snowfall_amount' 'kg m-2'
+ 157  'convective_snowfall_flux' 'kg m-2 s-1'
+ 158  'depth' 'm'
+ 159  'dew_point_depression' 'K'
+ 160  'dew_point_temperature' 'K'
+ 161  'dimensionless_exner_function' '1'
+ 162  'direction_of_sea_ice_velocity' 'degree'
+ 163  'direction_of_sea_water_velocity' 'degree'
+ 164  'direction_of_swell_wave_velocity' 'degree'
+ 165  'direction_of_wind_wave_velocity' 'degree'
+ 166  'dissipation_in_atmosphere_boundary_layer' 'W m-2'
+ 167  'divergence_of_sea_ice_velocity' 's-1'
+ 168  'divergence_of_wind' 's-1'
+ 169  'downward_eastward_momentum_flux_in_air' 'Pa'
+ 170  'downward_eastward_stress_at_sea_ice_base' 'Pa'
+ 171  'downward_heat_flux_in_air' 'W m-2'
+ 172  'downward_heat_flux_in_sea_ice' 'W m-2'
+ 173  'downward_heat_flux_in_soil' 'W m-2'
+ 174  'downward_northward_momentum_flux_in_air' 'Pa'
+ 175  'downward_northward_stress_at_sea_ice_base' 'Pa'
+ 176  'downwelling_photosynthetic_photon_flux_in_sea_water' 'mol m-2 s-1'
+ 177  'downwelling_spectral_radiative_flux_in_air' 'W m-2 m-1'
+ 178  'downwelling_spectral_radiative_flux_in_sea_water' 'W m-2 m-1'
+ 179  'eastward_momentum_flux_correction' 'Pa'
+ 180  'eastward_sea_ice_velocity' 'm s-1'
+ 181  'eastward_sea_water_velocity' 'm s-1'
+ 182  'eastward_wind' 'm s-1'
+ 183  'eastward_wind_shear' 's-1'
+ 184  'electromagnetic_wavelength' 'm'
+ 185  'equivalent_potential_temperature' 'K'
+ 186  'equivalent_temperature' 'K'
+ 187  'equivalent_thickness_at_stp_of_atmosphere_o3_content' 'm'
+ 188  'ertel_potential_vorticity' 'K m2 kg-1 s-1'
+ 189  'forecast_period' 's'
+ 190  'forecast_reference_time' 's'
+ 191  'freezing_level_altitude' 'm'
+ 192  'freezing_temperature_of_sea_water' 'K'
+ 193  'frozen_water_content_of_soil_layer' 'kg m-2'
+ 194  'geopotential' 'm2 s-2'
+ 195  'geopotential_height' 'm'
+ 196  'geopotential_height_anomaly' 'm'
+ 197  'grid_eastward_wind' 'm s-1'
+ 198  'grid_latitude' 'degree'
+ 199  'grid_longitude' 'degree'
+ 200  'grid_northward_wind' 'm s-1'
+ 201  'gross_primary_productivity_of_carbon' 'kg m-2 s-1'
+ 202  'heat_flux_correction' 'W m-2'
+ 203  'height' 'm'
+ 204  'height_at_cloud_top' 'm'
+ 205  'humidity_mixing_ratio' '1'
+ 206  'land_area_fraction' '1'
+ 207  'land_binary_mask' '1'
+ 208  'land_ice_area_fraction' '1'
+ 209  'large_scale_cloud_area_fraction' '1'
+ 210  'large_scale_precipitation_amount' 'kg m-2'
+ 211  'large_scale_rainfall_amount' 'kg m-2'
+ 212  'large_scale_rainfall_flux' 'kg m-2 s-1'
+ 213  'large_scale_rainfall_rate' 'm s-1'
+ 214  'large_scale_snowfall_amount' 'kg m-2'
+ 215  'large_scale_snowfall_flux' 'kg m-2 s-1'
+ 216  'latitude' 'degree_north'
+ 217  'leaf_area_index' '1'
+ 218  'litter_carbon_flux' 'kg m-2 s-1'
+ 219  'longitude' 'degree_east'
+ 220  'longwave_radiance' 'W m-2 sr-1'
+ 221  'lwe_convective_precipitation_rate' 'm s-1'
+ 222  'lwe_convective_snowfall_rate' 'm s-1'
+ 223  'lwe_large_scale_precipitation_rate' 'm s-1'
+ 224  'lwe_large_scale_snowfall_rate' 'm s-1'
+ 225  'lwe_precipitation_rate' 'm s-1'
+ 226  'lwe_snowfall_rate' 'm s-1'
+ 227  'lwe_thickness_of_atmosphere_water_vapor_content' 'm'
+ 228  'lwe_thickness_of_canopy_water_amount' 'm'
+ 229  'lwe_thickness_of_convective_precipitation_amount' 'm'
+ 230  'lwe_thickness_of_large_scale_precipitation_amount' 'm'
+ 231  'lwe_thickness_of_moisture_content_of_soil_layer' 'm'
+ 232  'lwe_thickness_of_snowfall_amount' 'm'
+ 233  'lwe_thickness_of_soil_moisture_content' 'm'
+ 234  'lwe_thickness_of_surface_snow_amount' 'm'
+ 235  'lwe_thickness_of_water_evaporation_amount' 'm'
+ 236  'lwe_water_evaporation_rate' 'm s-1'
+ 237  'mass_fraction_of_cloud_ice_in_air' '1'
+ 238  'mass_fraction_of_cloud_liquid_water_in_air' '1'
+ 239  'mass_fraction_of_convective_condensed_water_in_air' '1'
+ 240  'mass_fraction_of_frozen_water_in_soil_moisture' '1'
+ 241  'mass_fraction_of_o3_in_air' '1'
+ 242  'mass_fraction_of_unfrozen_water_in_soil_moisture' '1'
+ 243  'mass_fraction_of_water_in_air' '1'
+ 244  'mass_mixing_ratio' '1'
+ 245  'mass_transport' 'kg s-1'
+ 246  'model_level_number' '1'
+ 247  'moisture_content_of_soil_layer' 'kg m-2'
+ 248  'mole_fraction_of_o3_in_air' '1'
+ 249  'net_downward_longwave_flux_in_air' 'W m-2'
+ 250  'net_downward_radiative_flux_at_top_of_atmosphere_model' 'W m-2'
+ 251  'net_downward_shortwave_flux_in_air' 'W m-2'
+ 252  'net_primary_productivity_of_carbon' 'kg m-2 s-1'
+ 253  'net_upward_longwave_flux_in_air' 'W m-2'
+ 254  'net_upward_shortwave_flux_in_air' 'W m-2'
+ 255  'northward_atmosphere_heat_transport' 'W'
+ 256  'northward_momentum_flux_correction' 'Pa'
+ 257  'northward_ocean_freshwater_transport' 'kg s-1'
+ 258  'northward_ocean_heat_transport' 'W'
+ 259  'northward_ocean_salt_transport' 'kg s-1'
+ 260  'northward_sea_ice_velocity' 'm s-1'
+ 261  'northward_sea_water_velocity' 'm s-1'
+ 262  'northward_wind' 'm s-1'
+ 263  'northward_wind_shear' 's-1'
+ 264  'ocean_barotropic_streamfunction' 'm3 s-1'
+ 265  'ocean_isopycnal_layer_thickness_diffusivity' 'm2 s-1'
+ 266  'ocean_meridional_overturning_streamfunction' 'm3 s-1'
+ 267  'ocean_mixed_layer_thickness' 'm'
+ 268  'ocean_s_coordinate' '1'
+ 269  'ocean_sigma_coordinate' '1'
+ 270  'omega' 'Pa s-1'
+ 271  'planetary_albedo' '1'
+ 272  'plant_respiration_carbon_flux' 'kg m-2 s-1'
+ 273  'potential_vorticity_of_atmosphere_layer' 'Pa-1 s-1'
+ 274  'potential_vorticity_of_ocean_layer' 'm-1 s-1'
+ 275  'precipitation_amount' 'kg m-2'
+ 276  'precipitation_flux' 'kg m-2 s-1'
+ 277  'product_of_eastward_wind_and_air_temperature' 'K m s-1'
+ 278  'product_of_eastward_wind_and_geopotential_height' 'm2 s-1'
+ 279  'product_of_eastward_wind_and_northward_wind' 'm2 s-2'
+ 280  'product_of_eastward_wind_and_omega' 'Pa m s-2'
+ 281  'product_of_eastward_wind_and_specific_humidity' 'm s-1'
+ 282  'product_of_northward_wind_and_air_temperature' 'K m s-1'
+ 283  'product_of_northward_wind_and_geopotential_height' 'm2 s-1'
+ 284  'product_of_northward_wind_and_omega' 'Pa m s-2'
+ 285  'product_of_northward_wind_and_specific_humidity' 'm s-1'
+ 286  'product_of_omega_and_air_temperature' 'K Pa s-1'
+ 287  'product_of_omega_and_specific_humidity' 'Pa s-1'
+ 288  'projection_x_coordinate' 'm'
+ 289  'projection_y_coordinate' 'm'
+ 290  'pseudo_equivalent_potential_temperature' 'K'
+ 291  'pseudo_equivalent_temperature' 'K'
+ 292  'rainfall_flux' 'kg m-2 s-1'
+ 293  'rainfall_rate' 'm s-1'
+ 294  'region' 'string'
+ 295  'relative_humidity' '1'
+ 296  'root_depth' 'm'
+ 297  'runoff_flux' 'kg m-2 s-1'
+ 298  'sea_area_fraction' '1'
+ 299  'sea_floor_depth' 'm'
+ 300  'sea_ice_amount' 'kg m-2'
+ 301  'sea_ice_area' 'm2'
+ 302  'sea_ice_area_fraction' '1'
+ 303  'sea_ice_draft' 'm'
+ 304  'sea_ice_extent' 'm2'
+ 305  'sea_ice_freeboard' 'm'
+ 306  'sea_ice_mass' 'kg'
+ 307  'sea_ice_speed' 'm s-1'
+ 308  'sea_ice_thickness' 'm'
+ 309  'sea_ice_volume' 'm3'
+ 310  'sea_surface_elevation' 'm'
+ 311  'sea_surface_elevation_anomaly' 'm'
+ 312  'sea_surface_salinity' '1e-3'
+ 313  'sea_surface_temperature' 'K'
+ 314  'sea_water_density' 'kg m-3'
+ 315  'sea_water_electrical_conductivity' 'S m-1'
+ 316  'sea_water_potential_density' 'kg m-3'
+ 317  'sea_water_potential_temperature' 'K'
+ 318  'sea_water_salinity' '1e-3'
+ 319  'sea_water_sigma_t' 'kg m-3'
+ 320  'sea_water_sigma_theta' 'kg m-3'
+ 321  'sea_water_speed' 'm s-1'
+ 322  'sea_water_temperature' 'K'
+ 323  'shortwave_radiance' 'W m-2 sr-1'
+ 324  'significant_height_of_swell_waves' 'm'
+ 325  'significant_height_of_wind_and_swell_waves' 'm'
+ 326  'significant_height_of_wind_waves' 'm'
+ 327  'snowfall_amount' 'kg m-2'
+ 328  'snowfall_flux' 'kg m-2 s-1'
+ 329  'snow_grain_size' 'm'
+ 330  'snow_soot_content' 'kg m-2'
+ 331  'snow_temperature' 'K'
+ 332  'soil_albedo' '1'
+ 333  'soil_carbon_content' 'kg m-2'
+ 334  'soil_frozen_water_content' 'kg m-2'
+ 335  'soil_moisture_content' 'kg m-2'
+ 336  'soil_moisture_content_at_field_capacity' 'kg m-2'
+ 337  'soil_temperature' 'K'
+ 338  'specific_convective_available_potential_energy' 'J kg-1'
+ 339  'specific_humidity' '1'
+ 340  'specific_potential_energy' 'J kg-1'
+ 341  'spectral_radiance' 'W m-2 m-1 sr-1'
+ 342  'square_of_air_temperature' 'K2'
+ 343  'square_of_brunt_vaisala_frequency_in_air' 's-2'
+ 344  'square_of_eastward_wind' 'm2 s-2'
+ 345  'square_of_northward_wind' 'm2 s-2'
+ 346  'subsurface_runoff_amount' 'kg m-2'
+ 347  'subsurface_runoff_flux' 'kg m-2 s-1'
+ 348  'surface_air_pressure' 'Pa'
+ 349  'surface_albedo' '1'
+ 350  'surface_albedo_assuming_deep_snow' '1'
+ 351  'surface_albedo_assuming_no_snow' '1'
+ 352  'surface_altitude' 'm'
+ 353  'surface_downward_eastward_stress' 'Pa'
+ 354  'surface_downward_heat_flux_in_air' 'W m-2'
+ 355  'surface_downward_latent_heat_flux' 'W m-2'
+ 356  'surface_downward_northward_stress' 'Pa'
+ 357  'surface_downward_sensible_heat_flux' 'W m-2'
+ 358  'surface_downward_water_flux' 'kg m-2 s-1'
+ 359  'surface_downwelling_longwave_flux' 'W m-2'
+ 360  'surface_downwelling_longwave_flux_assuming_clear_sky' 'W m-2'
+ 361  'surface_downwelling_photosynthetic_photon_flux_in_sea_water' 'mol m-2 s-1'
+ 362  'surface_downwelling_shortwave_flux' 'W m-2'
+ 363  'surface_downwelling_shortwave_flux_assuming_clear_sky' 'W m-2'
+ 364  'surface_downwelling_spectral_radiative_flux_in_air' 'W m-2 m-1'
+ 365  'surface_downwelling_spectral_radiative_flux_in_sea_water' 'W m-2 m-1'
+ 366  'surface_net_downward_longwave_flux' 'W m-2'
+ 367  'surface_net_downward_shortwave_flux' 'W m-2'
+ 368  'surface_net_upward_longwave_flux' 'W m-2'
+ 369  'surface_net_upward_shortwave_flux' 'W m-2'
+ 370  'surface_roughness_length' 'm'
+ 371  'surface_runoff_amount' 'kg m-2'
+ 372  'surface_runoff_flux' 'kg m-2 s-1'
+ 373  'surface_snow_amount' 'kg m-2'
+ 374  'surface_snow_area_fraction' '1'
+ 375  'surface_snow_melt_amount' 'kg m-2'
+ 376  'surface_snow_melt_flux' 'kg m-2 s-1'
+ 377  'surface_snow_melt_heat_flux' 'W m-2'
+ 378  'surface_snow_thickness' 'm'
+ 379  'surface_snow_thickness_where_sea_ice' 'm'
+ 380  'surface_temperature' 'K'
+ 381  'surface_temperature_anomaly' 'K'
+ 382  'surface_upward_heat_flux_in_air' 'W m-2'
+ 383  'surface_upward_latent_heat_flux' 'W m-2'
+ 384  'surface_upward_sensible_heat_flux' 'W m-2'
+ 385  'surface_upward_water_flux' 'kg m-2 s-1'
+ 386  'surface_upwelling_longwave_flux' 'W m-2'
+ 387  'surface_upwelling_longwave_flux_assuming_clear_sky' 'W m-2'
+ 388  'surface_upwelling_shortwave_flux' 'W m-2'
+ 389  'surface_upwelling_shortwave_flux_assuming_clear_sky' 'W m-2'
+ 390  'surface_upwelling_spectral_radiative_flux_in_air' 'W m-2 m-1'
+ 391  'surface_upwelling_spectral_radiative_flux_in_sea_water' 'W m-2 m-1'
+ 392  'swell_wave_period' 's'
+ 393  'tendency_of_air_pressure' 'Pa s-1'
+ 394  'tendency_of_air_temperature_due_to_diabatic_processes' 'K s-1'
+ 395  'tendency_of_air_temperature_due_to_dry_convection' 'K s-1'
+ 396  'tendency_of_air_temperature_due_to_large_scale_precipitation' 'K s-1'
+ 397  'tendency_of_air_temperature_due_to_longwave_heating' 'K s-1'
+ 398  'tendency_of_air_temperature_due_to_longwave_heating_assuming' 'K s-1'
+ 399  'tendency_of_air_temperature_due_to_moist_convection' 'K s-1'
+ 400  'tendency_of_air_temperature_due_to_shortwave_heating' 'K s-1'
+ 401  'tendency_of_air_temperature_due_to_shortwave_heating_assumin' 'K s-1'
+ 402  'tendency_of_eastward_wind' 'm s-2'
+ 403  'tendency_of_eastward_wind_due_to_convection' 'm s-2'
+ 404  'tendency_of_eastward_wind_due_to_gravity_wave_drag' 'm s-2'
+ 405  'tendency_of_northward_wind' 'm s-2'
+ 406  'tendency_of_northward_wind_due_to_convection' 'm s-2'
+ 407  'tendency_of_northward_wind_due_to_gravity_wave_drag' 'm s-2'
+ 408  'tendency_of_ocean_barotropic_streamfunction' 'm3 s-2'
+ 409  'tendency_of_sea_ice_thickness_due_to_thermodynamics' 'm s-1'
+ 410  'tendency_of_specific_humidity_due_to_convection' 's-1'
+ 411  'tendency_of_specific_humidity_due_to_model_physics' 's-1'
+ 412  'tendency_of_surface_air_pressure' 'Pa s-1'
+ 413  'tendency_of_wind_speed_due_to_convection' 'm s-2'
+ 414  'tendency_of_wind_speed_due_to_gravity_wave_drag' 'm s-2'
+ 415  'thunderstorm_probability' '1'
+ 416  'time' 's'
+ 417  'toa_incoming_shortwave_flux' 'W m-2'
+ 418  'toa_net_downward_radiative_flux' 'W m-2'
+ 419  'toa_net_downward_shortwave_flux' 'W m-2'
+ 420  'toa_net_upward_longwave_flux' 'W m-2'
+ 421  'toa_net_upward_longwave_flux_assuming_clear_sky' 'W m-2'
+ 422  'toa_net_upward_shortwave_flux' 'W m-2'
+ 423  'toa_outgoing_longwave_flux' 'W m-2'
+ 424  'toa_outgoing_longwave_flux_assuming_clear_sky' 'W m-2'
+ 425  'toa_outgoing_shortwave_flux' 'W m-2'
+ 426  'toa_outgoing_shortwave_flux_assuming_clear_sky' 'W m-2'
+ 427  'transpiration_amount' 'kg m-2'
+ 428  'transpiration_flux' 'kg m-2 s-1'
+ 429  'tropopause_air_pressure' 'Pa'
+ 430  'tropopause_air_temperature' 'K'
+ 431  'tropopause_altitude' 'm'
+ 432  'tropopause_downwelling_longwave_flux' 'W m-2'
+ 433  'tropopause_net_downward_longwave_flux' 'W m-2'
+ 434  'tropopause_net_downward_shortwave_flux' 'W m-2'
+ 435  'tropopause_upwelling_shortwave_flux' 'W m-2'
+ 436  'upward_air_velocity' 'm s-1'
+ 437  'upward_air_velocity_expressed_as_tendency_of_sigma' 's-1'
+ 438  'upward_eastward_stress_at_sea_ice_base' 'Pa'
+ 439  'upward_heat_flux_in_air' 'W m-2'
+ 440  'upward_northward_stress_at_sea_ice_base' 'Pa'
+ 441  'upward_sea_ice_basal_heat_flux' 'W m-2'
+ 442  'upward_sea_water_velocity' 'm s-1'
+ 443  'upward_water_vapor_flux_in_air' 'kg m-2 s-1'
+ 444  'upwelling_spectral_radiative_flux_in_air' 'W m-2 m-1'
+ 445  'upwelling_spectral_radiative_flux_in_sea_water' 'W m-2 m-1'
+ 446  'vegetation_area_fraction' '1'
+ 447  'vegetation_carbon_content' 'kg m-2'
+ 448  'virtual_temperature' 'K'
+ 449  'visibility_in_air' 'm'
+ 450  'water_content_of_atmosphere_layer' 'kg m-2'
+ 451  'water_evaporation_amount' 'kg m-2'
+ 452  'water_evaporation_flux' 'kg m-2 s-1'
+ 453  'water_flux_correction' 'kg m-2 s-1'
+ 454  'water_flux_into_ocean' 'kg m-2 s-1'
+ 455  'water_flux_into_ocean_from_rivers' 'kg m-2 s-1'
+ 456  'water_vapor_content_of_atmosphere_layer' 'kg m-2'
+ 457  'water_vapor_pressure' 'Pa'
+ 458  'water_vapor_saturation_deficit' 'Pa'
+ 459  'wet_bulb_temperature' 'K'
+ 460  'wind_from_direction' 'degree'
+ 461  'wind_mixing_energy_flux_into_ocean' 'W m-2'
+ 462  'wind_speed' 'm s-1'
+ 463  'wind_speed_shear' 's-1'
+ 464  'wind_to_direction' 'degree'
+ 465  'wind_wave_period' 's'
+ 466  'wind_stress' 'Pa'
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/cosp_input_nl.txt
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/cosp_input_nl.txt	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/cosp_input_nl.txt	(revision 1950)
@@ -0,0 +1,103 @@
+! (c) British Crown Copyright 2008, the Met Office.
+! All rights reserved.
+! 
+! Redistribution and use in source and binary forms, with or without modification, are permitted 
+! provided that the following conditions are met:
+! 
+!     * Redistributions of source code must retain the above copyright notice, this list 
+!       of conditions and the following disclaimer.
+!     * Redistributions in binary form must reproduce the above copyright notice, this list
+!       of conditions and the following disclaimer in the documentation and/or other materials 
+!       provided with the distribution.
+!     * Neither the name of the Met Office nor the names of its contributors may be used 
+!       to endorse or promote products derived from this software without specific prior written 
+!       permission.
+! 
+! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 
+! IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
+! FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 
+! CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+! DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
+! IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 
+! OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+! Namelist that sets up the main COSP options
+&COSP_INPUT
+  CMOR_NL='./cmor/cosp_cmor_nl.txt', ! CMOR namelist
+  NPOINTS_IT=10000,! Max number of gridpoints to be processed in one iteration
+  NCOLUMNS=20,  ! Number of subcolumns
+  NLEVELS=39,   ! Number of model levels 
+  USE_VGRID=.true., ! Use fixed vertical grid for outputs? (if .true. then you need to define number of levels with Nlr)
+  NLR=40,       ! Number of levels in statistical outputs (only used if USE_VGRID=.true.)
+  CSAT_VGRID=.true., ! CloudSat vertical grid? (if .true. then the CloudSat standard grid is used for the outputs.
+                     !  USE_VGRID needs also be .true.)
+  FINPUT='histday.nc', ! NetCDF file with 1D inputs
+!  FINPUT='cosp_input_um_2d.nc', ! NetCDF file with 2D inputs
+  !----------------------------------------------------------------------------------
+  !--------------- Inputs related to radar simulations
+  !----------------------------------------------------------------------------------
+  RADAR_FREQ=94.0, ! CloudSat radar frequency (GHz)
+  SURFACE_RADAR=0, ! surface=1, spaceborne=0
+  use_mie_tables=0,! use a precomputed lookup table? yes=1,no=0
+  use_gas_abs=1,   ! include gaseous absorption? yes=1,no=0
+  do_ray=0,        ! calculate/output Rayleigh refl=1, not=0
+  melt_lay=0,      ! melting layer model off=0, on=1
+  k2=-1,           ! |K|^2, -1=use frequency dependent default
+  use_reff=.true., ! True if you want effective radius to be used by radar simulator (always used by lidar)
+  use_precipitation_fluxes=.true.,  ! True if precipitation fluxes are input to the algorithm 
+  !----------------------------------------------------------------------------------
+  !---------------- Inputs related to lidar simulations
+  !----------------------------------------------------------------------------------
+  Nprmts_max_hydro=12, ! Max number of parameters for hydrometeor size distributions
+  Naero=1,             ! Number of aerosol species (Not used)
+  Nprmts_max_aero=1,   ! Max number of parameters for aerosol size distributions (Not used)
+  lidar_ice_type=0,    ! Ice particle shape in lidar calculations (0=ice-spheres ; 1=ice-non-spherical)
+  OVERLAP=3,   !  overlap type: 1=max, 2=rand, 3=max/rand
+  !----------------------------------------------------------------------------------
+  !---------------- Inputs related to ISCCP simulator
+  !----------------------------------------------------------------------------------
+  ISCCP_TOPHEIGHT=1,  !  1 = adjust top height using both a computed
+                       !  infrared brightness temperature and the visible
+                       !  optical depth to adjust cloud top pressure. Note
+                       !  that this calculation is most appropriate to compare
+                       !  to ISCCP data during sunlit hours.
+                      !  2 = do not adjust top height, that is cloud top
+                       !  pressure is the actual cloud top pressure
+                       !  in the model
+                      !  3 = adjust top height using only the computed
+                       !  infrared brightness temperature. Note that this
+                       !  calculation is most appropriate to compare to ISCCP
+                       !  IR only algortihm (i.e. you can compare to nighttime
+                       !  ISCCP data with this option)
+  ISCCP_TOPHEIGHT_DIRECTION=2,   ! direction for finding atmosphere pressure level
+                                 ! with interpolated temperature equal to the radiance
+                                 ! determined cloud-top temperature
+                                 ! 1 = find the *lowest* altitude (highest pressure) level
+                                 ! with interpolated temperature equal to the radiance
+                                 ! determined cloud-top temperature
+                                 ! 2 = find the *highest* altitude (lowest pressure) level
+                                 ! with interpolated temperature equal to the radiance 
+                                 ! determined cloud-top temperature
+                                 ! ONLY APPLICABLE IF top_height EQUALS 1 or 3
+                                 ! 1 = default setting, and matches all versions of 
+                                 ! ISCCP simulator with versions numbers 3.5.1 and lower
+                                 ! 2 = experimental setting  
+  !----------------------------------------------------------------------------------
+  !-------------- RTTOV inputs
+  !----------------------------------------------------------------------------------
+  Platform=1,    ! satellite platform
+  Satellite=15,  ! satellite
+  Instrument=0,  ! instrument
+  Nchannels=8,   ! Number of channels to be computed
+  Channels=1,3,5,6,8,10,11,13,        ! Channel numbers (please be sure that you supply Nchannels)
+  Surfem=0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,  ! Surface emissivity (please be sure that you supply Nchannels)
+  ZenAng=50.0, ! Satellite Zenith Angle
+  CO2=5.241e-04, ! Mixing ratios of trace gases
+  CH4=9.139e-07,
+  N2O=4.665e-07,
+  CO=2.098e-07
+/
+
+
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/cosp_output_nl.txt
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/cosp_output_nl.txt	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/cosp_output_nl.txt	(revision 1950)
@@ -0,0 +1,63 @@
+! (c) British Crown Copyright 2008, the Met Office.
+! All rights reserved.
+! 
+! Redistribution and use in source and binary forms, with or without modification, are permitted 
+! provided that the following conditions are met:
+! 
+!     * Redistributions of source code must retain the above copyright notice, this list 
+!       of conditions and the following disclaimer.
+!     * Redistributions in binary form must reproduce the above copyright notice, this list
+!       of conditions and the following disclaimer in the documentation and/or other materials 
+!       provided with the distribution.
+!     * Neither the name of the Met Office nor the names of its contributors may be used 
+!       to endorse or promote products derived from this software without specific prior written 
+!       permission.
+! 
+! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 
+! IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
+! FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 
+! CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+! DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+! DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
+! IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 
+! OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+! Namelist that sets up output-related variables. It controls 
+! the instrument simulators to run and the list of variables 
+! to be written to file
+&COSP_OUTPUT
+  ! Simulator flags
+  Lradar_sim=.false.,
+  Llidar_sim=.true.,
+  Lisccp_sim=.true.,
+  Lmisr_sim=.false.,
+  ! Output variables
+  Lalbisccp=.true.,
+  Latb532=.true.,
+  Lboxptopisccp=.true.,
+  Lboxtauisccp=.true.,
+  Lcfad_dbze94=.false.,
+  Lcfad_lidarsr532=.true.,
+  Lclcalipso=.true.,
+  Lclhcalipso=.true.,
+  Lclisccp2=.true.,
+  Lcllcalipso=.true.,
+  Lclmcalipso=.true.,
+  Lcltcalipso=.true.,
+  Lctpisccp=.true.,
+  Ldbze94=.false.,
+  Ltauisccp=.true.,
+  Ltclisccp=.true.,
+  Llongitude=.false.,
+  Llatitude=.false.,
+  Lparasol_refl=.true.,
+  LclMISR=.false.,
+  Lmeantbisccp=.true.,
+  Lmeantbclrisccp=.true.,
+  ! Use lidar and radar
+  Lclcalipso2=.false.,
+  Lcltlidarradar=.false.,
+  ! These are provided for debugging or special purposes
+  Lfrac_out=.false.,
+  Lbeta_mol532=.true.,  
+/
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_144x142x19
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_144x142x19	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_144x142x19	(revision 1950)
@@ -0,0 +1,55 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## periode de la dissipation (en pas)
+idissip=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=15
+##  Avec ou sans strato
+ok_strato=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=1
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=1.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_144x142x39
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_144x142x39	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_144x142x39	(revision 1950)
@@ -0,0 +1,55 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=720
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## periode de la dissipation (en pas)
+idissip=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=3600.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=15
+##  Avec ou sans strato
+ok_strato=y
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_56x55x19
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_56x55x19	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_56x55x19	(revision 1950)
@@ -0,0 +1,73 @@
+## $Header: /home/ioipsl/CVSROOT/IPSLCM4_v1_OASIS3/EXP00/gcm.def_ORCA4xLMD7245,v 1.1.1.1 2005/03/23 15:44:29 adm Exp $
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=240
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## periode de la dissipation (en pas)
+idissip=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=36000.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=18000.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=18000.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=5
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_strato=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=1
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=1.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
+##  [FC] Transport par les ondes stationnaires selon Francis Codron
+##  Choix possibles :
+##Â  * dissuv=y, diss_uvwin=n, dissuvz=n (local)
+##  * dissuv=n, diss_uvwin=n, dissuvz=y (moyenne zonale)
+##  * dissuv=y, diss_uvwin=y, dissuvz=n (lissage sur 120Â° de longitude)
+##Â  Dans le permier cas, mettre fact_uv Ã  0.2 ou 0.3 dans dissip_p.F,
+##  sinon c'est un peu fort...
+dissuv=n
+diss_uvwin=n
+dissuvz=n
+## [FC] fichiers instantanes de controle une fois par jour
+out_diss=n
+## Orosm pour le lissage de l'orog.
+ok_orosm=n
+# GKLIFT : Gravity Wave Drag calculation parameter
+GKLIFT=0.5
+## Fract pour le fractionnement des mailles
+ok_fract=.true.
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x71x19
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x71x19	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x71x19	(revision 1950)
@@ -0,0 +1,55 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## periode de la dissipation (en pas)
+idissip=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=10800.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=18000.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=18000.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=10
+##  Avec ou sans strato
+ok_strato=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=1
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=1.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x95x19
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x95x19	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x95x19	(revision 1950)
@@ -0,0 +1,55 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## periode de la dissipation (en pas)
+idissip=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=7200.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=7200.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=10
+##  Avec ou sans strato
+ok_strato=n
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=1
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=1.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x95x39
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x95x39	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/gcm.def_96x95x39	(revision 1950)
@@ -0,0 +1,55 @@
+## $Id$
+## nombre de pas par jour (multiple de iperiod) ( ici pour  dt = 1 min )      
+day_step=480
+## periode pour le pas Matsuno (en pas)
+iperiod=5
+## periode de la dissipation (en pas)
+idissip=5
+## choix de l'operateur de dissipation (star ou  non star )
+lstardis=y
+## nombre d'iterations de l'operateur de dissipation   gradiv
+nitergdiv=1
+## nombre d'iterations de l'operateur de dissipation  nxgradrot
+nitergrot=2
+## nombre d'iterations de l'operateur de dissipation  divgrad            
+niterh=2
+## temps de dissipation des plus petites long.d ondes pour u,v (gradiv)  
+tetagdiv=5400.
+## temps de dissipation des plus petites long.d ondes pour u,v(nxgradrot)
+tetagrot=5400.
+## temps de dissipation des plus petites long.d ondes pour  h ( divgrad) 
+tetatemp=5400.
+## coefficient pour gamdissip                                            
+coefdis=0.
+## choix du shema d'integration temporelle (Matsuno ou Matsuno-leapfrog) 
+purmats=n
+## avec ou sans physique                                                 
+physic=y
+## periode de la physique (en pas)                                       
+iphysiq=10
+##  Avec ou sans strato
+ok_strato=y 
+#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
+iflag_top_bound=2
+#  Coefficient pour la couche eponge (valeur derniere couche)
+tau_top_bound=5.e-5
+## longitude en degres du centre du zoom                                 
+clon=0.
+## latitude en degres du centre du zoom                                  
+clat=0.
+## facteur de grossissement du zoom,selon longitude                      
+grossismx=1.0
+## facteur de grossissement du zoom ,selon latitude                      
+grossismy=1.0
+##  Fonction  f(y)  hyperbolique  si = .true.  , sinon  sinusoidale         
+fxyhypb=y
+## extension en longitude  de la zone du zoom  ( fraction de la zone totale)
+dzoomx=0.0
+## extension en latitude de la zone  du zoom  ( fraction de la zone totale)
+dzoomy=0.0
+##raideur du zoom en  X
+taux=3.
+##raideur du zoom en  Y
+tauy=3.
+##  Fonction  f(y) avec y = Sin(latit.) si = .true. , sinon y = latit.         
+ysinus=y
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/iodef.xml
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/iodef.xml	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/iodef.xml	(revision 1950)
@@ -0,0 +1,718 @@
+<?xml version="1.0"?>
+<simulation> 
+  
+  <context id="nemo">
+
+    <!-- $id$ -->
+    
+    <!-- 
+============================================================================================================
+=                                  definition of all existing variables                                    =
+=                                            DO NOT CHANGE                                                 =
+============================================================================================================
+    -->
+    
+    <field_definition level="0" prec="4" operation="ave(X)" enabled=".TRUE."> <!-- time step automaticaly defined -->
+
+      <!-- T grid -->
+      
+      <group id="grid_T" axis_ref="none" grid_ref="grid_T">
+	<field id="toce"         description="temperature"                               unit="degC" axis_ref="deptht"   />
+       	<field id="soce"         description="salinity"                                  unit="psu"  axis_ref="deptht"   />
+	<field id="sst"          description="sea surface temperature"                   unit="degC"                     />
+	<field id="sst2"         description="square of sea surface temperature"         unit="degC2"                    />
+	<field id="|sstgrad|"    description="module of sst gradient"                    unit="degC/m"                   />
+	<field id="|sstgrad|2"   description="square of module of sst gradient"          unit="degC2/m2"                 />
+	<field id="sss"          description="sea surface salinity"                      unit="psu"                      />
+	<field id="sss2"         description="square of sea surface salinity"            unit="psu2"                     />
+	<field id="ssh"          description="sea surface height"                        unit="m"                        />
+	<field id="ssh2"         description="square of sea surface height"              unit="m2"                       />
+	<field id="mldkz5"       description="mixing layer depth (Turbocline)"           unit="m"                        />
+	<field id="mldr10_1"     description="Mixed Layer Depth 0.01 ref.10m"            unit="m"                        />
+       	<field id="rhop"         description="potential density (sigma0)"                unit="kg/m3" axis_ref="deptht"  />
+	<!-- next variables available with key_diahth -->
+	<field id="mlddzt"       description="Thermocline Depth (max dT/dz)"             unit="m"                        />
+	<field id="mldr10_3"     description="Mixed Layer Depth dr=0.03 (ref.10m)"       unit="m"                        />
+	<field id="mldr0_1"      description="Mixed Layer Depth dr=0.01 (ref.surf)"      unit="m"                        />
+	<field id="mldr0_3"      description="Mixed Layer Depth dr=0.03 (ref.surf)"      unit="m"                        />
+	<field id="mld|dt|"      description="Mixed Layer Depth |dt|=0.2 (ref.10m)"      unit="m"                        />
+	<field id="topthdep"     description="Top of the thermocline dt=-0.2 (ref.10m)"  unit="m"                        />
+	<field id="pycndep"      description="Pycnocline depth dr~dt=-0.2 (ref.10m)"     unit="m"                        />
+	<field id="BLT"          description="Barrier Layer Thickness"                   unit="m"                        />
+	<field id="tinv"         description="Max of vertical invertion of temperature"  unit="degC"                     />
+	<field id="depti"        description="Depth of max. vert. inv. of temperature"   unit="m"                        />
+	<field id="20d"          description="Depth of 20C isotherm"                     unit="m"                        />
+	<field id="28d"          description="Depth of 28C isotherm"                     unit="m"                        />
+	<field id="hc300"        description="Heat content 300 m"                        unit="W"                        />
+	<!-- variables available with key_diaar5 -->
+	<field id="botpres"      description="Pressure at sea floor"                     unit="dbar"                     />
+	<field id="cellthc"      description="Cell thickness"                            unit="m"     axis_ref="deptht"  />
+     </group>
+
+      <!-- SBC -->
+      
+      <group id="SBC" axis_ref="none" grid_ref="grid_T" > <!-- time step automaticaly defined based on nn_fsbc -->
+
+	<field id="emp"          description="Net Upward Water Flux"                                        unit="kg/m2/s"  />
+	<field id="emps"         description="concentration/dilution water flux"                            unit="kg/m2/s"  />
+	<field id="snowpre"      description="Snow precipitation"                                           unit="kg/m2/s"  />
+	<field id="runoffs"      description="River Runoffs"                                                unit="kg/m2/s"  />
+
+	<field id="qns+qsr"      description="Net Downward Heat Flux"                                       unit="W/m2"     />
+	<field id="qns"          description="non solar Downward Heat Flux"                                 unit="W/m2"     />
+	<field id="qsr"          description="Shortwave Radiation"                                          unit="W/m2"     />
+	<field id="qsr3d"        description="Shortwave Radiation 3D distribution"        axis_ref="deptht" unit="W/m2"     />
+	<field id="qrp"          description="Surface Heat Flux: Damping"                                   unit="W/m2"     />
+	<field id="erp"          description="Surface Water Flux: Damping"                                  unit="kg/m2/s"  />
+	<field id="taum"         description="wind stress module"                                           unit="N/m2"     />
+	<field id="wspd"         description="Wind speed module at 10 m"                                    unit="m/s"      />
+	
+	<!-- *_oce variables available with ln_blk_clio or ln_blk_core -->
+	<field id="qns_oce"      description="Non solar Downward Heat Flux over open ocean"                 unit="W/m2"     />
+	<field id="qlw_oce"      description="Longwave Downward Heat Flux over open ocean"                  unit="W/m2"     />
+	<field id="qsb_oce"      description="Sensible Downward Heat Flux over open ocean"                  unit="W/m2"     />
+	<field id="qla_oce"      description="Latent Downward Heat Flux over open ocean"                    unit="W/m2"     />
+	<field id="taum_oce"     description="wind stress module over open ocean"                           unit="N/m2"     />
+
+	<field id="ice_cover"    description="Ice fraction"                                                 unit="1"        />
+
+	<field id="ioceflxb"     description="Oceanic flux at the ice base"                                 unit="W/m2"     />
+	<field id="qsr_ai_cea"   description="Air-Ice downward solar heat flux (cell average)"              unit="W/m2"     />
+	<field id="qns_ai_cea"   description="Air-Ice downward non-solar heat flux (cell average)"          unit="W/m2"     />
+	<field id="qla_ai_cea"   description="Air-Ice downward Latent heat flux (cell average)"             unit="W/m2"     />
+	
+	<field id="qsr_io_cea"   description="Ice-Oce downward solar heat flux (cell average)"              unit="W/m2"     />
+	<field id="qns_io_cea"   description="Ice-Oce downward non-solar heat flux (cell average)"          unit="W/m2"     />
+	
+	<field id="snowthic_cea" description="Snow thickness (cell average)"                                unit="m"        />
+	<field id="icethic_cea"  description="Ice thickness (cell average)"                                 unit="m"        />
+	<field id="iceprod_cea"  description="Ice production (cell average)"                                unit="m/s"      />
+	
+	<field id="ice_pres"     description="Ice presence"                                                 unit="-"        />
+	<field id="ist_cea"      description="Ice surface temperature (cell average)"                       unit="degC"     />
+	<field id="ist_ipa"      description="Ice surface temperature (ice presence average)"               unit="degC"     />      
+	<field id="uice_ipa"     description="Ice velocity along i-axis at I-point (ice presence average)"  unit="m/s"      />      
+	<field id="vice_ipa"     description="Ice velocity along j-axis at I-point (ice presence average)"  unit="m/s"      />      
+	
+	<field id="utau_ice"     description="Wind stress along i-axis over the ice at i-point"             unit="N/m2"     />
+	<field id="vtau_ice"     description="Wind stress along j-axis over the ice at i-point"             unit="N/m2"     />
+	
+	<field id="u_imasstr"    description="Sea-ice mass transport along i-axis"                          unit="kg/s"     />
+	<field id="v_imasstr"    description="Sea-ice mass transport along j-axis"                          unit="kg/s"     />
+
+	<!-- available key_coupled -->
+	<field id="snow_ao_cea"  description="Snow over ice-free ocean (cell average)"                      unit="kg/m2/s"  />
+	<field id="snow_ai_cea"  description="Snow over sea-ice (cell average)"                             unit="kg/m2/s"  />
+	<field id="subl_ai_cea"  description="Sublimation over sea-ice (cell average)"                      unit="kg/m2/s"  />
+	<field id="icealb_cea"   description="Ice albedo (cell average)"                                    unit="1"        />
+	<field id="calving"      description="Calving"                                                      unit="kg/m2/s"  />
+	<!-- available if key_coupled + conservative method -->
+	<field id="rain"         description="Liquid precipitation"                                         unit="kg/m2/s"  />
+	<field id="evap_ao_cea"  description="Evaporation over ice-free ocean (cell average)"               unit="kg/m2/s"  />
+	<!-- variables available with key_diaar5 -->
+	<field id="isnwmlt_cea"   description="Snow over Ice melting (cell average)"                        unit="kg/m2/s"  />
+	<field id="fsal_virt_cea" description="Virtual salt flux due to ice formation (cell average)"       unit="kg/m2/s"  />
+	<field id="fsal_real_cea" description="Real salt flux due to ice formation (cell average)"          unit="kg/m2/s"  />
+	<field id="hflx_rain_cea" description="heat flux due to rainfall"                                   unit="W/m2"     />
+	<field id="hflx_evap_cea" description="heat flux due to evaporation"                                unit="W/m2"     />
+	<field id="hflx_snow_cea" description="heat flux due to snow falling over ice-free ocean"           unit="W/m2"     />
+	<field id="hflx_ice_cea"  description="heat flux due to ice thermodynamics"                         unit="W/m2"     />
+	<field id="hflx_rnf_cea"  description="heat flux due to runoffs"                                    unit="W/m2"     />
+	<field id="hflx_cal_cea"  description="heat flux due to calving"                                    unit="W/m2"     />
+	<field id="bicemel_cea"  description="Rate of Melt at Sea Ice Base (cell average)"                  unit="kg/m2/s"  />
+	<field id="licepro_cea"  description="Lateral Sea Ice Growth Rate (cell average)"                   unit="kg/m2/s"  />
+	<field id="snowmel_cea"  description="Snow Melt Rate (cell average)"                                unit="kg/m2/s"  />
+	<field id="sntoice_cea"  description="Snow-Ice Formation Rate (cell average)"                       unit="kg/m2/s"  />
+	<field id="ticemel_cea"  description="Rate of Melt at Upper Surface of Sea Ice (cell average)"      unit="kg/m2/s"  />
+
+      </group>
+
+      <!-- U grid -->
+      
+      <group id="grid_U"  axis_ref="depthu" grid_ref="grid_U">
+	<field id="utau"         description="Wind Stress along i-axis"                    unit="N/m2" axis_ref="none" />
+	<field id="uoce"         description="ocean current along i-axis"                  unit="m/s"                  />
+	<field id="uoce_eff"     description="Effective ocean current along i-axis"        unit="m/s"                  />
+	<!-- uoce_eiv: available with key_traldf_eiv and key_diaeiv -->
+	<field id="uoce_eiv"     description="EIV ocean current along i-axis"              unit="m/s"                  />
+	<!-- uoce_eiv: available with key_trabbl_adv -->
+	<field id="uoce_bbl"     description="BBL ocean current along i-axis"              unit="m/s"                  />
+ 	<!-- variables available with key_diaar5 -->
+	<field id="u_masstr"     description="ocean eulerian mass transport along i-axis"  unit="kg/s"                 />
+	<field id="u_heattr"     description="ocean eulerian heat transport along i-axis"  unit="W"    axis_ref="none" />
+	<field id="ueiv_heattr"  description="ocean bolus heat transport along i-axis"     unit="W"    axis_ref="none" />
+	<field id="udiff_heattr" description="ocean diffusion heat transport along i-axis" unit="W"    axis_ref="none" />
+     </group>
+      
+      <!-- V grid -->
+      
+      <group id="grid_V"  axis_ref="depthv" grid_ref="grid_V">
+	<field id="vtau"         description="Wind Stress along j-axis"                    unit="N/m2" axis_ref="none" />
+	<field id="voce"         description="ocean current along j-axis"                  unit="m/s"                  />
+	<field id="voce_eff"     description="Effective ocean current along j-axis"        unit="m/s"                  />
+	<!-- voce_eiv: available with key_traldf_eiv and key_diaeiv -->
+	<field id="voce_eiv"     description="EIV ocean current along j-axis"              unit="m/s"                  />
+	<!-- voce_eiv: available with key_trabbl_adv -->
+	<field id="voce_bbl"     description="BBL ocean current along j-axis"              unit="m/s"                  />
+	<!-- variables available with key_diaar5 -->
+	<field id="v_masstr"     description="ocean eulerian mass transport along j-axis"  unit="kg/s"                 />
+	<field id="v_heattr"     description="ocean eulerian heat transport along j-axis"  unit="W"    axis_ref="none" />
+	<field id="veiv_heattr"  description="ocean bolus heat transport along j-axis"     unit="W"    axis_ref="none" />
+	<field id="vdiff_heattr" description="ocean diffusion heat transport along j-axis" unit="W"    axis_ref="none" />
+      </group>
+      
+      <!-- W grid -->
+      
+      <group id="grid_W"  axis_ref="depthw" grid_ref="grid_W">
+	<field id="woce"         description="ocean vertical velocity"                     unit="m/s"                  />
+	<field id="woce_eff"     description="effective ocean vertical velocity"           unit="m/s"                  />
+	<!-- woce_eiv: available with key_traldf_eiv and key_diaeiv -->
+	<field id="woce_eiv"     description="EIV ocean vertical velocity"                 unit="m/s"                  />
+	<!-- woce_eiv: available with key_trabbl_adv -->
+	<field id="woce_bbl"     description="BBL ocean vertical velocity"                 unit="m/s"                  />
+	<field id="avt"          description="vertical eddy diffusivity"                   unit="m2/s"                 />
+	<field id="avm"          description="vertical eddy viscosity"                     unit="m2/s"                 />
+	<!-- avs: available with key_zdfddm -->
+	<field id="avs"          description="salt vertical eddy diffusivity"              unit="m2/s"                 />
+	<!-- avt_evd and avm_evd: available with ln_zdfevd -->
+	<field id="avt_evd"      description="enhanced vertical diffusivity"               unit="m2/s"                 />
+	<field id="avm_evd"      description="enhanced vertical viscosity"                 unit="m2/s"                 />
+	<!-- aht2d and  aht2d_eiv: available with key_traldf_eiv and key_traldf_c2d -->
+	<field id="aht2d"        description="lateral eddy diffusivity"                    unit="m2/s" axis_ref="none" />
+	<field id="aht2d_eiv"    description="EIV lateral eddy diffusivity"                unit="m2/s" axis_ref="none" />
+	<!-- avt_tide: available with key_zdftmx -->
+	<field id="av_tide"      description="tidal vertical diffusivity"                  unit="m2/s"                 />
+	<!-- variables available with key_diaar5 -->   
+	<field id="w_masstr"     description="vertical mass trasport"                      unit="kg/s"                 />
+	<field id="w_masstr2"    description="square of vertical mass trasport"            unit="kg2/s2"               />
+      </group>
+          
+      <!-- scalar -->
+      
+      <!-- variables available with key_diaar5 -->
+      <group id="scalar" axis_ref="none" grid_ref="scalarpoint" zoom_ref="1point" >
+	<field id="voltot"     description="global mean volume"                         unit="m3"   />
+	<field id="sshtot"     description="global mean ssh"                            unit="m"    />
+	<field id="sshsteric"  description="global mean ssh steric"                     unit="m"    />
+	<field id="sshthster"  description="global mean ssh thermosteric"               unit="m"    />
+	<field id="masstot"    description="global mean mass"                           unit="kg"   />
+	<field id="temptot"    description="global mean temperature"                    unit="degC" />
+	<field id="saltot"     description="global mean salinity"                       unit="psu"  />
+	<field id="fram_trans" description="Sea Ice Mass Transport Through Fram Strait" unit="kg/s" />
+      </group>
+
+      <!-- ptrc on T grid -->
+          
+     <group id="ptrc_T" axis_ref="deptht" grid_ref="grid_T">  
+       <field id="DIC"      description="Dissolved inorganic Concentration"        unit="molC/L" />
+       <field id="Alkalini" description="Total Alkalinity Concentration"           unit="eq/L"    />
+       <field id="O2"       description="Oxygen Concentration"                     unit="molO2/L" />
+       <field id="CaCO3"    description="Calcite Concentration"                    unit="molC/L" />
+       <field id="PO4"      description="Phosphate Concentration"                  unit="molC/L" />
+       <field id="POC"      description="Small organic carbon Concentration"       unit="molC/L" />
+       <field id="Si"       description="Silicate Concentration"                   unit="molSi/L" />
+       <field id="PHY"      description="Nanophytoplankton Concentration"          unit="molC/L" />
+       <field id="ZOO"      description="Microzooplankton Concentration"           unit="molC/L" />
+       <field id="DOC"      description="Dissolved organic Concentration"          unit="molC/L" />
+       <field id="PHY2"     description="Diatoms Concentration"                    unit="molC/L" />
+       <field id="ZOO2"     description="Mesozooplankton Concentration"            unit="molC/L" />
+       <field id="BSi"      description="Diatoms Silicate Concentration"           unit="molC/L" />
+       <field id="Fer"      description="Dissolved Iron Concentration"             unit="molFe/L" />
+       <field id="BFe"      description="Big iron particles Concentration"         unit="molFe/L" />
+       <field id="GOC"      description="Big organic carbon Concentration"         unit="molC/L" />
+       <field id="SFe"      description="Small iron particles Concentration"       unit="molFe/L" />
+       <field id="DFe"      description="Diatoms iron  Concentration"              unit="molFe/L" />
+       <field id="DSi"      description="Sinking biogenic Silicate Concentration"  unit="molC/L" />
+       <field id="NFe"      description="Nano iron Concentration"                  unit="molC/L" />
+       <field id="NCHL"     description="Nano chlorophyl Concentration"            unit="gChl/L" />
+       <field id="DCHL"     description="Diatoms chlorophyl Concentration"         unit="gChl/L" />
+       <field id="NO3"      description="Nitrates Concentration"                   unit="molC/L" />
+       <field id="NH4"      description="Ammonium Concentration"                   unit="molC/L" />
+     </group>
+
+      <!-- diad on T grid : : variables available with key_trc_diaadd && key_trc_dia3d -->
+
+     <group id="diad_T" axis_ref="none" grid_ref="grid_T">
+       <field id="PH"          description="PH"                                       unit="-"           axis_ref="deptht" />
+       <field id="CO3"         description="Bicarbonates"                             unit="mol/L"       axis_ref="deptht" />
+       <field id="CO3sat"      description="CO3 saturation"                           unit="mol/L"       axis_ref="deptht" />
+       <field id="PAR"         description="Photosynthetically Available Radiation"   unit="W/m2"        axis_ref="deptht" />
+       <field id="PPPHY"       description="Primary production of nanophyto"          unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="PPPHY2"      description="Primary production of diatoms"            unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="PPNEWN"      description="New Primary production of nanophyto"      unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="PPNEWD"      description="New Primary production of diatoms"        unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="PBSi"        description="Primary production of Si diatoms"         unit="molSi/m3/s"  axis_ref="deptht" />
+       <field id="PFeN"        description="Primary production of nano iron"          unit="molFe/m3/s"  axis_ref="deptht" />
+       <field id="PFeD"        description="Primary production of diatoms iron"       unit="molFe/m3/s"  axis_ref="deptht" />
+       <field id="PCAL"        description="Calcite production"                       unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="DCAL"        description="Calcite dissolution"                      unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="GRAZ"        description="Grazing by zooplankton"                   unit="molC/m3/s"   axis_ref="deptht" />
+       <field id="Nfix"        description="Nitrogen fixation at surface"             unit="molN/m2/s"      />
+       <field id="EPC100"      description="Export of carbon particles at 100 m"      unit="molC/m2/s"      />
+       <field id="EPFE100"     description="Export of biogenic iron at 100 m"         unit="molFe/m2/s"     />
+       <field id="EPSI100"     description="Export of Silicate at 100 m"              unit="molSi/m2/s"     />
+       <field id="EPCAL100"    description="Export of Calcite at 100 m"               unit="molC/m2/s"      />
+       <field id="Cflx"        description="DIC flux"                                 unit="molC/m2/s"      />
+       <field id="Oflx"        description="Oxygen flux"                              unit="molC/m2/s"      />
+       <field id="Kg"          description="Gas transfer"                             unit="molC/m2/s/uatm" />
+       <field id="Dpco2"       description="Delta CO2"                                unit="uatm"            />
+       <field id="Dpo2"        description="Delta O2"                                 unit="uatm"            />
+       <field id="Heup"        description="Euphotic layer depth"                     unit="m"               />
+       <field id="Irondep"     description="Iron deposition"                          unit="molFe/m2/s"     />
+     </group>
+
+      <!-- dbio_T on T grid : variables available with key_diaar5 -->
+     <group id="dbio_T" axis_ref="none" grid_ref="grid_T">
+       <field id="PHYT"        description="Total phytoplankton Concentration"                   unit="molC/L"     axis_ref="deptht" />
+       <field id="ZOOT"        description="Total zooplankton Concentration"                     unit="molC/L"     axis_ref="deptht" />
+       <field id="CHLT"        description="Total chlorophyll Concentration"                     unit="gChl/L"     axis_ref="deptht" />
+       <field id="POCT"        description="Total carbon particles Concentration"                unit="molC/L"     axis_ref="deptht" />
+       <field id="PFET"        description="Total biogenic Iron Concentration"                   unit="molFe/L"     axis_ref="deptht" />
+       <field id="TPP"         description="Total Primary production of phyto"                   unit="molC/m3/s"  axis_ref="deptht" />
+       <field id="TPNEW"       description="New Primary production of phyto"                     unit="molC/m3/s"  axis_ref="deptht" />
+       <field id="TPBFE"       description="Total biogenic iron production"                      unit="molFe/m3/s" axis_ref="deptht" />
+       <field id="EXPC"        description="Export of carbon"                                    unit="molC/m2/s"  axis_ref="deptht" />
+       <field id="EXPFE"       description="Export of biogenic iron"                             unit="molFe/m2/s" axis_ref="deptht" />
+       <field id="EXPSI"       description="Export of Silicate"                                  unit="molSi/m2/s" axis_ref="deptht" />
+       <field id="EXPCAL"      description="Export of Calcite"                                   unit="molC/m2/s"  axis_ref="deptht" />
+       <field id="PHSFC"       description="PH at surface"                                       unit="-"       />
+       <field id="INTDIC"      description="DIC content"                                         unit="kg/m2"   />
+       <field id="O2MIN"       description="Oxygen minimum concentration"                        unit="molC/L" />
+       <field id="ZO2MIN"      description="Depth of oxygen minimum concentration"               unit="m"       />
+       <field id="INTNFIX"     description="Nitrogen fixation rate : vert. integrated"           unit="molN/m2/s"  />
+       <field id="INTPPPHY"    description="Vertically integrated primary production by nanophy" unit="molC/m2/s"  />
+       <field id="INTPPPHY2"   description="Vertically integrated primary production by diatom"  unit="molC/m2/s"  />
+       <field id="INTPP"       description="Vertically integrated primary production by phyto"   unit="molC/m2/s"  />
+       <field id="INTPNEW"     description="Vertically integrated new primary production"        unit="molC/m2/s"  />
+       <field id="INTPBFE"     description="Vertically integrated of biogenic iron production"   unit="molFe/m2/s" />
+       <field id="INTPBSI"     description="Vertically integrated of biogenic Si production"     unit="molSi/m2/s" />
+       <field id="INTPCAL"     description="Vertically integrated of calcite production"         unit="molSi/m2/s" />
+     </group>
+
+    </field_definition>
+    
+    <!-- 
+============================================================================================================
+=                                                                                                          =
+=                                           output files definition                                        =
+=                                                                                                          =
+=                  http://www2-pcmdi.llnl.gov/svn/repository/cmor/trunk/Tables/CMIP5_Oclim                 =
+=                  http://www2-pcmdi.llnl.gov/svn/repository/cmor/trunk/Tables/CMIP5_Omon                  =
+=                  http://www2-pcmdi.llnl.gov/svn/repository/cmor/trunk/Tables/CMIP5_Oimon                 =              
+=          http://www.clivar.org/organization/wgomd/references/WGOMD_CMIP5_ocean_fields.June2009.pdf       =
+=                                                                                                          =
+============================================================================================================
+    -->
+    
+    <file_definition output_level="<OUTPUT_LEVEL>" >
+      <!--
++++++++++++++++++++++++++++++++++++++++++++++++   daily   ++++++++++++++++++++++++++++++++++++++++++++++++++
+        -->
+      <group id="1d" output_freq="86400"  enabled="<1D_ENABLE>">                             <!-- 1d files -->
+	<!--
+..............................................    grid T   .................................................
+	  -->
+	<file id="ORCA2_1d_grid_T" description="table 2.2" >                                 <!-- grid T  Table 2.2 -->
+	  <field ref="sst"          name="sosstsst" description="sea_surface_temperature"                              level="2"                      />
+	  <field ref="sst2"         name="tossq"    description="square_of_sea_surface_temperature"                    level="2"                      />
+	  <field ref="mldkz5"       name="omldamax" description="ocean_mixed_layer_thickness_defined_by_mixing_scheme" level="2" operation="t_max(X)" />
+         <!--  IPSL variables -->
+	  <field ref="sss"          name="sosaline" description="sea_surface_salinity"                                 level="3"                      />
+	  <field ref="ssh"          name="sossheig" description="sea_surface_height_above_geoid"                       level="3"                      />
+	  <field ref="toce"         name="votemper" description="sea_water_potential_temperature"                      level="3"                      />
+	  <field ref="soce"         name="vosaline" description="sea_water_salinity"                                   level="3"                      />
+	</file> 
+	<!--
+..............................................    grid U   .................................................
+	  -->
+	<file id="ORCA2_1d_grid_U" description="ocean U grid variables : table 2.3" >                       <!-- grid U -->
+
+	  <!--  table 2.3 -->
+	    <field ref="uoce"         name="vozocrtx" description="sea_water_x_velocity"                                level="3"       />
+
+	</file> 
+
+	<!--
+..............................................    grid V   .................................................
+	  -->
+	<file id="ORCA2_1d_grid_V" description="ocean V grid variables : table 2.3" >                      <!-- grid V -->
+
+	  <!-- table 2.3 -->
+	    <field ref="voce"         name="vomecrty" description="sea_water_y_velocity"                                level="3"       />
+
+	</file>   
+  
+	<!--
+..............................................    icemod   .................................................
+	  -->
+	<file id="ORCA2_1d_icemod" description=" ice variables" >                                           <!-- icemod -->
+
+         <!-- table 2.2 -->
+          <field ref="uice_ipa"     name="iicevelu"   description="Ice velocity along i-axis at I-point (ice presence average)"  level="3"    />
+          <field ref="vice_ipa"     name="iicevelv"   description="Ice velocity along j-axis at I-point (ice presence average)"  level="3"    />
+          <field ref="ice_cover"    name="ileadfra"   description="sea_ice_area_fraction"                                        level="3"    />
+	  <field ref="icethic_cea"  name="iicethic"   description="sea_ice_thickness"                                            level="3"    />
+	</file>   
+
+      </group>
+	<!--
+++++++++++++++++++++++++++++++++++++++++++++++   monthly   +++++++++++++++++++++++++++++++++++++++++++++++++
+	  -->
+      <group id="1m" output_freq="-1"     enabled="<1M_ENABLE>">                             <!-- real monthly files -->
+	<!--
+..............................................    grid T   .................................................
+	  -->
+	<file id="ORCA2_1m_grid_T" description="ocean T grid variables table 2.2 2.5 2.6 2.7"> <!-- grid T -->
+
+          <!-- table 2.2 -->
+	    <field ref="botpres"      name="pbo"      description="sea_water_pressure_at_sea_floor"                               />
+	    <!-- pso : sea_water_pressure_at_sea_water_surface = 0 -->
+	    <field ref="ssh"          name="sossheig" description="sea_surface_height_above_geoid"                                 />
+	    <field ref="ssh2"         name="zossq"    description="square_of_sea_surface_height_above_geoid"             level="2" />
+	    <!-- masscello : sea_water_mass_per_unit_area = cellthc*rau0                                          no time changes -->
+	    <field ref="cellthc"      name="thkcello" description="cell_thickness"                                                 /> <!-- no time changes -->
+	    <field ref="toce"         name="votemper" description="sea_water_potential_temperature"                                />
+	    <field ref="sst"          name="sosstsst" description="sea_surface_temperature"                              level="1" />
+	    <field ref="sst2"         name="tossq"    description="square_of_sea_surface_temperature"                    level="2" />
+	    <field ref="soce"         name="vosaline" description="sea_water_salinity"                                             />
+	    <field ref="sss"          name="sosaline" description="sea_surface_salinity"                                 level="1" />
+	    <field ref="rhop"         name="rhopoto"  description="sea_water_potential_density"                          level="2" />
+	    <!-- no agessc : sea_water_age_since_surface_contact -->
+	    <!-- no cfc11  : moles_per_unit_mass_of_cfc11_in_sea_water -->
+	    <!-- msftbarot : ocean_barotropic_mass_streamfunction : offline -->
+	    <!-- mlotst    :           ocean_mixed_layer_thickness_defined_by_sigma_t : must be done offline -->
+	    <!-- mlotstsq  : square_of_ocean_mixed_layer_thickness_defined_by_sigma_t : must be done offline -->
+	    <field ref="mldkz5"       name='omlmax'   description="ocean_mixed_layer_thickness_defined_by_mixing_scheme" level="2" operation="t_max(X)" />
+
+          <!-- table 2.5 -->
+	    <field ref="rain"         name="pr"       description="rainfall_flux"                                           level="1" />
+	    <field ref="snow_ao_cea"  name="prsn"     description="snowfall_flux"                                           level="1" />
+	    <field ref="evap_ao_cea"  name="evs"      description="water_evaporation_flux"                                  level="1" />
+	    <field ref="runoffs"      name="friver"   description="water_flux_into_sea_water_from_rivers"                   level="1" />
+	    <field ref="calving"      name="ficeberg" description="water_flux_into_sea_water_from_icebergs"                 level="1" />
+	    <field ref="isnwmlt_cea"  name="fsitherm" description="water_flux_into_sea_water_due_to_sea_ice_thermodynamics" level="1" />
+	    <field ref="emp"          name="sowaflup" description="water_flux_into_sea_water"                               level="1" />
+	    <!-- wfonocorr : water_flux_into_sea_water_without_flux_correction : emp - erp -->  
+	    <field ref="erp"          name="wfcorr"   description="water_flux_correction"                                   level="1" /> <!-- usually = 0 -->
+
+          <!-- table2.6 -->
+	    <!-- vsfpr    : virtual_salt_flux_into_sea_water_due_to_rainfall    = 0 --> 
+	    <!-- vsfevap  : virtual_salt_flux_into_sea_water_due_to_evaporation = 0 --> 
+	    <!-- vsfriver : virtual_salt_flux_into_sea_water_from_rivers        = 0 --> 	  
+	    <field ref="fsal_virt_cea" name="vsfsit" description="virtual_salt_flux_into_sea_water_due_to_sea_ice_thermodynamics" level="1" />
+	    <!-- vsf      : virtual_salt_flux_into_sea_water = fsal_virtual + fsal_real -->
+	    <!-- wfcorr   : virtual_salt_flux_correction                        = 0 --> 
+	    <field ref="fsal_virt_cea" name="sfdsi"  description="downward_sea_ice_basal_salt_flux"                               level="1" />
+	    <!-- sfriver  : salt_flux_into_sea_water_from_rivers                = 0 --> 
+
+          <!--  table 2.7 -->
+	    <!-- hfgeou : upward_geothermal_heat_flux_at_sea_floor : cte, see nambbc and trabbc.F90 -->
+	    <field ref="hflx_rain_cea" name="hfrainds"    description="temperature_flux_due_to_rainfall_expressed_as_heat_flux_into_sea_water"      level="1" />
+	    <field ref="hflx_evap_cea" name="hfevapds"    description="temperature_flux_due_to_evaporation_expressed_as_heat_flux_out_of_sea_water" level="1" />
+	    <field ref="hflx_rnf_cea"  name="hfrunoffds"  description="temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water"        level="1" />
+	    <field ref="hflx_snow_cea" name="hfsnthermds" description="heat_flux_into_sea_water_due_to_snow_thermodynamics"                         level="1" />
+	    <field ref="hflx_ice_cea"  name="hfsithermds" description="heat_flux_into_sea_water_due_to_sea_ice_thermodynamics"                      level="1" />
+	    <field ref="hflx_cal_cea"  name="hfibthermds" description="heat_flux_into_sea_water_due_to_iceberg_thermodynamics"                      level="1" />
+	    <!-- rlds   : surface_net_downward_longwave_flux : not available -->
+	    <!-- hfls   : surface_downward_latent_heat_flux  : not available -->
+	    <!-- hfss   : surface_downward_sensible_heat_flux: not available -->
+	    <field ref="qns"           name="nshfls"      description="surface_net_downward_non_solar_flux"                                         level="1" />
+	    <field ref="qsr"           name="soshfldo"    description="surface_net_downward_shortwave_flux"                                         level="1" />
+	    <field ref="qsr3d"         name="rsds"        description="downwelling_shortwave_flux_in_sea_water"                                     level="1" />
+	    <field ref="qrp"           name="hfcorr"      description="heat_flux_correction"                                                        level="1" />
+
+         <!--  IPSL variables -->
+        <field ref="qns+qsr"           name="sohefldo"    description="Net Downward Heat Flux"                                   />
+	<field ref="20d"               name="so20chgt"    description="Depth of 20C isotherm"                                    />
+	<field ref="28d"               name="so28chgt"    description="Depth of 28C isotherm"                                    />
+	<field ref="hc300"             name="sohtc300"    description="Heat content 300 m"                                       />
+	<field ref="mldr10_1"          name="somxl010"    description="Mixed Layer Depth 0.01 ref.10m"                           />
+	<field ref="mldr10_3"          name="somx3010"    description="Mixed Layer Depth dr=0.03 (ref.10m)"                      />
+	<field ref="mldkz5"            name="somixhgt"    description="mixing layer depth (Turbocline)"                          />
+	<field ref="emps"              name="sowaflcd"    description="concentration/dilution water flux"                        />
+	<field ref="taum"              name="sotaumod"    description="Wind stress module"                                       />
+	<field ref="wspd"              name="sowindsp"    description="Wind speed module at 10 m"                                />
+	<field ref="ice_cover"         name="soicecov"    description="sea_ice_area_fraction"                                    />
+	<field ref="BLT"               name="blt"         description="Barrier Layer Thickness"                    level="3"     />
+	<field ref="mld|dt|"           name="mld|dt|"   description="Mixed Layer Depth |dt|=0.2 (ref.10m)"         level="3"     />
+
+	  </file>   
+	<!--
+..............................................    grid U   .................................................
+	  -->
+	<file id="ORCA2_1m_grid_U" description="ocean U grid variables : table 2.3 2.8" >                       <!-- grid U -->
+
+	  <!--  table 2.3 -->
+	    <field ref="uoce"         name="vozocrtx" description="sea_water_x_velocity"                                       />
+	    <field ref="u_masstr"     name="umo"      description="ocean_mass_x_transport"                           level="1" />
+	    <field ref="u_heattr"     name="hfx"      description="ocean_heat_x_transport"                           level="1" />
+	    <field ref="ueiv_heattr"  name="hfxba"    description="ocean_heat_x_transport_due_to_bolus_advection"    level="2" />
+	    <field ref="udiff_heattr" name="hfxdiff"  description="ocean_heat_x_transport_due_to_diffusion"          level="2" />
+
+	  <!-- table 2.8 -->
+	    <field ref="utau"         name="sozotaux" description="surface_downward_x_stress"                        level="1" />
+	    <!-- tauucorr : surface_downward_x_stress_correction = 0 -->
+
+         <!--  IPSL variables -->
+        <field ref="uoce_eiv"         name="vozoeivu" description="EIV ocean current along i-axis"                             />
+
+        </file>   
+
+	<!--
+..............................................    grid V   .................................................
+	  -->
+	<file id="ORCA2_1m_grid_V" description="ocean V grid variables : table 2.3 2.8" >                      <!-- grid V -->
+
+	  <!-- table 2.3" -->
+	    <field ref="voce"         name="vomecrty" description="sea_water_y_velocity"                                       />
+	    <field ref="v_masstr"     name="vmo"      description="ocean_mass_y_transport"                           level="1" />
+	    <field ref="v_heattr"     name="hfy"      description="ocean_heat_y_transport"                           level="1" />
+	    <field ref="veiv_heattr"  name="hfyba"    description="ocean_heat_y_transport_due_to_bolus_advection"    level="2" />
+	    <field ref="vdiff_heattr" name="hfydiff"  description="ocean_heat_y_transport_due_to_diffusion"          level="2" />
+
+	  <!-- table 2.8 -->
+	    <field ref="vtau"         name="sometauy" description="surface_downward_y_stress"                        level="1" />
+	    <!-- tauvcorr : surface_downward_y_stress_correction = 0 -->
+
+         <!--  IPSL variables -->
+        <field ref="voce_eiv"         name="vomeeivv" description="EIV ocean current along j-axis"                             />
+
+	</file>   
+
+	<!--
+..............................................    grid W   .................................................
+	  -->
+	<file id="ORCA2_1m_grid_W" description="ocean W grid variables table 2.3 2.9 2.10" >                   <!-- grid W -->
+	  
+	  <!-- table 2.3 -->
+	    <field ref="w_masstr"   name="wmo"   description="upward_ocean_mass_transport"                                    />
+	    <field ref="w_masstr2"  name="wmosq" description="square_pf_upward_ocean_mass_transport"                          />
+	  
+	  <!-- table 2.9 -->
+	    <field ref="avt"     name="votkeavt" description="ocean_vertical_heat_diffusivity"                  level="2" />
+	    <field ref="avs"     name="voddmavs" description="ocean_vertical_salt_diffusivity"                  level="2" />
+	    <!-- difvtrbo : ocean_vertical_tracer_diffusivity_due_to_background : cte with time, see namelist parameters nn_avb and  nn_havtb -->
+	    <field ref="av_tide" name="difvtrto" description="ocean_vertical_tracer_diffusivity_due_to_tides"   level="2" />
+	    <!-- tnpeo     : tendency_of_ocean_potential_energy_content                   : not available -->
+	    <!-- tnpeot    : tendency_of_ocean_potential_energy_content_due_to_tides      : not available -->
+	    <!-- tnpeotb   : tendency_of_ocean_potential_energy_content_due_to_background : not available -->
+	    <field ref="avm"     name="difvmo"   description="ocean_vertical_momentum_diffusivity"              level="2" />
+	    <!-- difvmbo : ocean_vertical_momentum_diffusivity_due_to_background : cte with time, see namelist parameters nn_avb -->
+	    <field ref="av_tide" name="difvmto"  description="ocean_vertical_momentum_diffusivity_due_to_tides" level="2" /> <!-- same as tracer -->
+	    <!-- difvmfdo : ocean_vertical_momentum_diffusivity_due_to_form_drag : ??? -->
+	    <!-- dispkevfo : ocean_kinetic_energy_dissipation_per_unit_area_due_to_vertical_friction : not available -->
+
+	  <!-- table 2.10 -->
+	    <!-- if ln_traldf_lap    =  .true. -->
+	    <field ref="aht2d_eiv" name="soleaeiw" description="ocean_tracer_bolus_laplacian_diffusivity"                     level="2" />
+	    <!-- diftrelo : ocean_tracer_epineutral_laplacian_diffusivity : cte with time, see ln_traldf_iso -->
+	    <!-- diftrxylo : ocean_tracer_xy_laplacian_diffusivity : cte with time -->
+	    <field ref="aht2d"     name="soleahtw" description="ocean_tracer_xy_laplacian_diffusivity"                        level="2" />
+	    <!-- if ln_traldf_bilap  =  .true. -->
+	    <!-- field ref="diftrbbo" name="aht2d_eiv" description="ocean_tracer_bolus_biharmonic_diffusivity"                level="2" /-->
+	    <!-- diftrebo : ocean_tracer_epineutral_biharmonic_diffusivity : cte with time, see ln_traldf_iso -->
+	    <!-- diftrxybo : ocean_tracer_xy_biharmonic_diffusivity : cte with time -->
+	    <!-- tnkebto : tendency_of_ocean_eddy_kinetic_energy_content_due_to_bolus_transport : not available -->
+	    <!-- difmxylo : ocean_momentum_xy_laplacian_diffusivity : cte with time, see ln_dynldf_lap -->
+	    <!-- difmxybo : ocean_momentum_xy_biharmonic_diffusivity : cte with time, see ln_dynldf_bilap -->
+	    <!-- dispkexyfo : ocean_kinetic_energy_dissipation_per_unit_area_due_to_xy_friction : not available -->
+
+         <!--  IPSL variables -->
+        <field ref="woce"             name="vovecrtz" description="ocean vertical velocity"                          />
+        <field ref="woce_eiv"         name="voveeivw" description="EIV ocean vertical velocity"                      />
+
+
+	  </file>   
+
+	<!--
+..............................................    icemod   .................................................
+	  -->
+	<file id="ORCA2_1m_icemod" description=" ice variables" >                                           <!-- icemod -->
+         <!-- table 2.2 -->
+	  <field ref="ice_pres"                     />
+	  <field ref="ice_cover"    name="soicecov"   description="sea_ice_area_fraction"                            />
+	  <field ref="icethic_cea"  name="iicethic"   description="sea_ice_thickness"                                />
+	  <field ref="subl_ai_cea"  name="evap"       description="water_evaporation_flux"                           />
+	  <field ref="snowthic_cea" name="isnowthi"   description="surface_snow_thickness"                           />
+	  <!-- snc : surface_snow_area_fraction : same as sic -->
+	  <field ref="icealb_cea"   name="ialb"       description="Bare Sea Ice Albedo"                              />
+	  <!-- ssi : Sea Ice Salinity : cte = sice = 6, expect in baltic sea = 2 -->
+	  <field ref="ist_cea"      name="tsice"      description="Surface Temperature of Sea Ice"                   />
+	  <!-- tsnint : Temperature at Interface Between Sea Ice and Snow : not available -->
+	  <!-- pr : Surface Rainfall Rate into the Sea Ice Portion of the Grid Cell = 0 -->
+	  <field ref="snow_ai_cea"  name="prsn"       description="Surface Snowfall Rate into the Sea Ice Portion of the Grid Cell" />
+	  <!-- ageice   : Age of Sea Ice : not available ??? -->
+	  <!-- grFrazil : Frazil Sea Ice Growth (Leads) Rate ??? -->
+	  <!-- grCongel : Congelation Sea Ice Growth Rate ??? -->
+	  <field ref="licepro_cea"  name="grLateral"  description="Lateral Sea Ice Growth Rate"                      />
+	  <field ref="sntoice_cea"  name="snoToIce"   description="Snow-Ice Formation Rate"                          />
+	  <field ref="snowmel_cea"  name="snomelt"    description="Snow Melt Rate"                                   />
+	  <field ref="ticemel_cea"  name="tmelt"      description="Rate of Melt at Upper Surface of Sea Ice"         />
+	  <field ref="bicemel_cea"  name="bmelt"      description="Rate of Melt at Sea Ice Base"                     />
+	  <!-- hcice  : Sea Ice Total Heat Content ??? -->
+	  <field ref="qsr_ai_cea"   name="rsdssi"     description="surface_downwelling_shortwave_flux_in_air"        />
+	  <!-- rsussi : surface_upwelling_shortwave_flux_in_air ??? -->
+	  <!-- rldssi : surface_downwelling_longwave_flux_in_air ??? -->
+	  <!-- rlussi : surface_upwelling_longwave_flux_in_air ??? -->
+	  <!-- hfssi  : surface_upward_sensible_heat_flux ??? -->
+	  <!-- hflssi : surface_upward_latent_heat_flux ??? -->
+	  <field ref="subl_ai_cea"  name="sblsi"      description="surface_snow_and_ice_sublimation_flux"             />
+	  <field ref="u_imasstr"    name="transix"    description="Eastward Sea Ice Transport"                        />
+	  <field ref="v_imasstr"    name="transiy"    description="Northward Sea Ice Transport"                       />
+	  <field ref="fram_trans"   name="transifs"   description="Sea Ice Mass Transport Through Fram Strait"        />
+	  <field ref="utau_ice"     name="strairx"    description="Eastward Atmospheric Stress On Sea Ice"            />
+	  <field ref="vtau_ice"     name="strairy"    description="Northward Atmospheric Stress On Sea Ice"           />
+	  <!-- strocnx : Eastward Ocean Stress On Sea Ice ??? -->
+	  <!-- strocny : Northward Ocean Stress On Sea Ice ??? -->
+	  <!-- streng  : Compressive Sea Ice Strength ??? -->
+	  <!-- divice  : Strain Rate Divergence of Sea Ice ??? -->
+	  <!-- shrice  : Strain Rate Shear of Sea Ice ??? -->
+	  <!-- ridgice : Sea Ice Ridging Rate ??? -->
+         <!-- IPSL variables -->
+          <field ref="ist_ipa"    name="iicetemp"   description="Ice surface temperature (ice presence average)"               />
+          <field ref="uice_ipa"   name="iicevelu"   description="Ice velocity along i-axis at I-point (ice presence average)"  />
+          <field ref="vice_ipa"   name="iicevelv"   description="Ice velocity along j-axis at I-point (ice presence average)"  />
+          <field ref="ice_cover"  name="ileadfra"   description="sea_ice_area_fraction"                                        />
+
+	</file>   
+
+	<!--
+..............................................    scalar   .................................................
+	  -->
+	<file id="ORCA2_1m_scalar" description="Ocean scalar" >                                <!-- scalar -->
+         <!-- table 2.2 -->
+	  <field ref="masstot"    name="masso"    description="sea_water_mass"                                />
+	  <field ref="voltot"     name="volo"     description="sea_water_volume"                              />
+	  <field ref="sshtot"     name="zosga"    description="global_average_sea_level_change"               />
+	  <field ref="sshsteric"  name="zossga"   description="global_average_steric_sea_level_change"        />
+	  <field ref="sshthster"  name="zostoga"  description="global_average_thermosteric_sea_level_change"  />
+	  <field ref="temptot"    name="thetaoga" description="sea_water_potential_temperature"               />
+	  <field ref="saltot"     name="soga"     description="sea_water_salinity"                            />
+	</file>   
+
+        <!--
+..............................................   ptrc_T   .................................................
+          -->
+        <file id="ORCA2_1m_ptrc_T" description="Marine Biogeochemical 3-D Fields" >            <!-- ptrc_T -->
+          <field ref="DIC"      />
+          <field ref="Alkalini" />
+          <field ref="O2"       />
+          <field ref="CaCO3"    />
+          <field ref="PO4"      />
+          <field ref="POC"      />
+          <field ref="Si"       />
+          <field ref="PHY"      />
+          <field ref="ZOO"      />
+          <field ref="DOC"      />
+          <field ref="PHY2"     />
+          <field ref="ZOO2"     />
+          <field ref="BSi"      />
+          <field ref="Fer"      />
+          <field ref="BFe"      />
+          <field ref="GOC"      />
+          <field ref="SFe"      />
+          <field ref="DFe"      />
+          <field ref="DSi"      />
+          <field ref="NFe"      />
+          <field ref="NCHL"     />
+          <field ref="DCHL"     />
+          <field ref="NO3"      />
+          <field ref="NH4"      />
+       </file>
+
+        <!--
+..............................................  diad_T   .................................................
+          -->
+       <file id="ORCA2_1m_diad_T" description="Marine Biogeochemical Fields : Additional diagnostics" >
+          <field ref="PH"       />
+          <field ref="CO3"      />
+          <field ref="CO3sat"   />
+          <field ref="PAR"      />
+          <field ref="PPPHY"    />
+          <field ref="PPPHY2"   />
+          <field ref="PPNEWN"   />
+          <field ref="PPNEWD"   />
+          <field ref="PBSi"     />
+          <field ref="PFeN"     />
+          <field ref="PFeD"     />
+          <field ref="PCAL"     />
+          <field ref="DCAL"     />
+          <field ref="GRAZ"     />
+          <field ref="EPC100"   />
+          <field ref="EPFE100"  />
+          <field ref="EPSI100"  />
+          <field ref="EPCAL100" />
+          <field ref="Cflx"     />
+          <field ref="Oflx"     />
+          <field ref="Kg"       />
+          <field ref="Dpco2"    />
+          <field ref="Dpo2"     />
+          <field ref="Heup"     />
+          <field ref="Irondep"  />
+          <field ref="Nfix"     />
+       </file>
+
+        <!--
+..............................................  dbio_T   .................................................
+          -->
+       <file id="ORCA2_1m_dbio_T" description="Marine Biogeochemical Fields : Additional AR5 variables" >
+          <field ref="PHYT"        />
+          <field ref="ZOOT"        />
+          <field ref="CHLT"        />
+          <field ref="POCT"        />
+          <field ref="PFET"        />
+          <field ref="TPP"         />
+          <field ref="TPNEW"       />
+          <field ref="TPBFE"       />
+          <field ref="EXPC"        />
+          <field ref="EXPFE"       />
+          <field ref="EXPSI"       />
+          <field ref="EXPCAL"      />
+          <field ref="INTDIC"      />
+          <field ref="O2MIN"       />
+          <field ref="ZO2MIN"      />
+          <field ref="INTNFIX"     />
+          <field ref="INTPPPHY"    />
+          <field ref="INTPPPHY2"   />
+          <field ref="INTPP"       />
+          <field ref="INTPNEW"     />
+          <field ref="INTPBFE"     />
+          <field ref="INTPBSI"     />
+          <field ref="INTPCAL"     />
+       </file>
+
+      </group>   
+
+      <!-- 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+        -->
+    </file_definition>
+    
+    <!-- 
+============================================================================================================
+=                                           grid definition                                                =
+=                                            DO NOT CHANGE                                                 =
+============================================================================================================
+    -->
+    
+    <axis_definition>  
+      <axis id="deptht" description="Vertical T levels" unit="m" positive=".false." />
+      <axis id="depthu" description="Vertical U levels" unit="m" positive=".false." />
+      <axis id="depthv" description="Vertical V levels" unit="m" positive=".false." />
+      <axis id="depthw" description="Vertical W levels" unit="m" positive=".false." />
+      <axis id="none" description="axe non defini" unit="none" size="1" />
+    </axis_definition> 
+    
+    <grid_definition>
+      <grid id="grid_T" description="grid T" />
+      <grid id="grid_U" description="grid U" />
+      <grid id="grid_V" description="grid V" />
+      <grid id="grid_W" description="grid W" />
+      <grid id="scalarpoint" description="scalar" >
+	<zoom id="1point" ibegin="1" jbegin="1" ni="1" nj="1" />
+      </grid>
+    </grid_definition>    
+    
+  </context>
+  
+</simulation>
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD144142
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD144142	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD144142	(revision 1950)
@@ -0,0 +1,569 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+# 
+# SEQMODE : 1        if all models run simultaneously
+#           n        if  n  models run sequentially
+ $SEQMODE
+              1
+ $END
+###############################################################################
+#
+# CHANNEL (CHAR*4)
+#           PIPE        if named pipes + binary files are used 
+#                       for synchro and data respectively (not tested);
+#           MPI1/2      if MPI message passing is used for data exchange;
+#
+ $CHANNEL
+<lib_mpi>
+<nproc_atm>  <nproc_atm>
+<nproc_oce>  <nproc_oce>        
+ $END
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            25
+ $END
+###############################################################################
+#
+# JOBNAME : acronym for the given simulation (CHAR*3)
+#
+ $JOBNAME
+            EXP   
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  lmdz.x oceanx
+ $END
+###############################################################################
+# 
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+ <total_time>
+ $END
+###############################################################################
+#
+# INIDATE (I8)
+#         initial date of the run (YYYYMMDD)         
+#
+ $INIDATE
+ <initial_date>
+ $END
+###############################################################################
+# 
+# MODINFO (YES or NOT)
+#         Indicates whether a header is encapsulated within the field
+#
+ $MODINFO
+  NOT
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in output file cplout: 
+#              0 = no printing
+#              1 = main routines and field names when treated
+#              2 = complete output
+#
+ $NLOGPRT
+   2
+ $END
+###############################################################################
+#
+# CALTYPE: Calendar type
+#                  0      = 365 day calendar (no leap years)
+#                  1      = 365 day, or 366 days for leap years, calendar
+#                  n (>1) = n day month calendar
+#
+ $CALTYPE
+ <calendar_type>
+ $END
+#
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted Sea surface temperature (o->a 1)
+#
+O_SSTSST SISUTESW 1 86400  5  sstoc.nc  <output_mode> 
+torc  tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+wo2a.tsg 93  1  12
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#  
+############################################################################
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrac SIICECOV 44 86400  5  sstoc.nc <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC  CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 12
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce SIICTEMW 34 86400  5  sstoc.nc  <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+wo2a.tsg 93  1  12 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#
+#############################################################################
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce  SIICEALW 17 86400  5  sstoc.nc  <output_mode>
+torc  tlmd  LAG=5760  
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 12
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 12
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE  
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1 
+#
+wo2a.tsg 93  1 12
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#  
+NORSUD   WSTEST
+############################################################################
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 12
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1  
+#  
+NORSUD   WSTEST
+#############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+# Field 8 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 86400  6  flxat.nc   <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+# Field 9 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+# Field 10 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 11 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 12 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 13 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 14 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 86400  6    flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+#########################################################################
+# Field 15 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26  86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2   32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 16 :  Total snow (o->a 9)
+#
+COTOTSNO  OTotSnow 28  86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 17 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap  25 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 18 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 19 : Total solar heat flux (a->o 12)
+#
+COQSRMIX  O_QsrMix  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2  32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+# Field 20 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX  O_QnsMix 6 86400  4   flxat.nc  <output_mode>
+tlmd    torc   LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    32 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 21 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    32 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+# Field 22 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE  O_QnsIce 6 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+# Field 23 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 86400  4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    32
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+# Field 24 : iceberg calving (a->o 17)
+#
+COCALVIN OCalving  36 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.cal  98   5   71
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+# Field 25 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 86400  5  flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC BLASNEW CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.run 94    4   513
+# change units from m/s to kg/s, change of sign
+# weights convert from kg/s to kg/m^2/s
+1000.0 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 86400  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=1800 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD5655
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD5655	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD5655	(revision 1950)
@@ -0,0 +1,585 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+# 
+# SEQMODE : 1        if all models run simultaneously
+#           n        if  n  models run sequentially
+ $SEQMODE
+              1
+ $END
+###############################################################################
+#
+# CHANNEL (CHAR*4)
+#           PIPE        if named pipes + binary files are used 
+#                       for synchro and data respectively (not tested);
+#           MPI1/2      if MPI message passing is used for data exchange;
+#
+ $CHANNEL
+ <lib_mpi>
+ <nproc_atm>  <nproc_atm>
+ <nproc_oce>  <nproc_oce>
+ $END
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            25
+ $END
+###############################################################################
+#
+# JOBNAME : acronym for the given simulation (CHAR*3)
+#
+ $JOBNAME
+            EXP   
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  lmdz.x oceanx
+ $END
+###############################################################################
+#
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+ <total_time>
+ $END
+###############################################################################
+#
+# INIDATE (I8)
+#         initial date of the run (YYYYMMDD)
+#
+ $INIDATE
+ <initial_date>
+ $END
+###############################################################################
+# 
+# MODINFO (YES or NOT)
+#         Indicates whether a header is encapsulated within the field
+#
+ $MODINFO
+  NOT
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in output file cplout: 
+#              0 = no printing
+#              1 = main routines and field names when treated
+#              2 = complete output
+#
+ $NLOGPRT
+   2
+ $END
+###############################################################################
+#
+# CALTYPE: Calendar type
+#                  0      = 365 day calendar (no leap years)
+#                  1      = 365 day, or 366 days for leap years, calendar
+#                  n (>1) = n day month calendar
+#
+ $CALTYPE
+ <calendar_type>
+ $END
+#
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted Sea surface temperature (o->a 1)
+#
+O_SSTSST SISUTESW 1 86400  5  sstoc.nc  <output_mode> 
+torc  tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+wo2a.tsg 93  1  35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#  
+############################################################################
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrac SIICECOV 44 86400  5  sstoc.nc <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC  CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce SIICTEMW 34 86400  5  sstoc.nc  <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+wo2a.tsg 93  1  35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#
+############################################################################
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce SIICEALW 17 86400  5  sstoc.nc  <output_mode>
+torc  tlmd  LAG=5760  
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE  
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1 
+#
+wo2a.tsg 93  1 35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#  
+NORSUD   WSTEST
+############################################################################
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 35
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1  
+#  
+NORSUD   WSTEST
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 8 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 86400  6  flxat.nc   <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 9 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 10 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 11 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 12 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 13 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+# Field 14 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 86400  6    flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1  
+# 
+#########################################################################
+# Field 15 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 16 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 17 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 18 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 19 : Total solar heat flux (a->o 12)
+#
+COQSRMIX  O_QsrMix  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 20 : Total Non solar heat flux  (a->o 13)
+#
+COQNSMIX  O_QnsMix 6 86400  4   flxat.nc  <output_mode>
+tlmd    torc   LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 21 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+#
+# Field 22 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+#
+# Field 23 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 86400  4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    7
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 24 : iceberg calving (a->o 17)
+#
+COCALVIN OCalving  36 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.cal  98   5   27
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 25 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 86400  5  flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC BLASNEW CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.run 94    4   129
+# change units from m/s to kg/s
+# weights convert from kg/s to kg/m^2/s
+1000.0 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 86400  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=1800 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD9671
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD9671	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD9671	(revision 1950)
@@ -0,0 +1,587 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+# 
+# SEQMODE : 1        if all models run simultaneously
+#           n        if  n  models run sequentially
+ $SEQMODE
+              1
+ $END
+###############################################################################
+#
+# CHANNEL (CHAR*4)
+#           PIPE        if named pipes + binary files are used 
+#                       for synchro and data respectively (not tested);
+#           MPI1/2      if MPI message passing is used for data exchange;
+#
+ $CHANNEL
+ <lib_mpi>
+ <nproc_atm>  <nproc_atm>
+ <nproc_oce>  <nproc_oce>
+ $END
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            25
+ $END
+###############################################################################
+#
+# JOBNAME : acronym for the given simulation (CHAR*3)
+#
+ $JOBNAME
+            EXP   
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  lmdz.x oceanx
+ $END
+###############################################################################
+#
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+ <total_time>
+ $END
+###############################################################################
+#
+# INIDATE (I8)
+#         initial date of the run (YYYYMMDD)
+#
+ $INIDATE
+ <initial_date>
+ $END
+###############################################################################
+# 
+# MODINFO (YES or NOT)
+#         Indicates whether a header is encapsulated within the field
+#
+ $MODINFO
+  NOT
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in output file cplout: 
+#              0 = no printing
+#              1 = main routines and field names when treated
+#              2 = complete output
+#
+ $NLOGPRT
+   2
+ $END
+###############################################################################
+#
+# CALTYPE: Calendar type
+#                  0      = 365 day calendar (no leap years)
+#                  1      = 365 day, or 366 days for leap years, calendar
+#                  n (>1) = n day month calendar
+#
+ $CALTYPE
+ <calendar_type>
+ $END
+#
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted Sea surface temperature (o->a 1)
+#
+O_SSTSST SISUTESW 1 86400  5  sstoc.nc  <output_mode> 
+torc  tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+wo2a.tsg 93  1  20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#  
+############################################################################
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrac SIICECOV 44 86400  5  sstoc.nc <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC  CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce SIICTEMW 34 86400  5  sstoc.nc  <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+wo2a.tsg 93  1  20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#
+############################################################################
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce SIICEALW 17 86400  5  sstoc.nc  <output_mode>
+torc  tlmd  LAG=5760  
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE  
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1 
+#
+wo2a.tsg 93  1 20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#  
+NORSUD   WSTEST
+############################################################################
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 20
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1  
+#  
+NORSUD   WSTEST
+#
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 8 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 86400  6  flxat.nc   <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 9 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 10 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 11 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 12 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 13 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2 24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+# Field 14 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 86400  6    flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+#########################################################################
+#
+# Field 15 : Total rain  (a->o 8)
+#
+COTOTRAI OTotRain 26 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 16 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 17 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 18 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 19 : Total solar heat flux (a->o 12)
+#
+COQSRMIX O_QsrMix  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 20 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX O_QnsMix 6 86400  4   flxat.nc  <output_mode>
+tlmd    torc   LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 21 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    14  
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+#
+# Field 22 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+#
+# Field 23 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 86400  4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    14
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 24 : iceberg calving (a->o 17)
+#
+COCALVIN OCalving  36 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.cal  98   5   36
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 25 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 86400  5  flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC BLASNEW CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.run 94    4   158
+# change units from m/s to kg/s
+# weights convert from kg/s to kg/m^2/s
+1000.0 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 86400  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=1800 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD9695
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD9695	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namcouple_ORCA2xLMD9695	(revision 1950)
@@ -0,0 +1,592 @@
+###############################################################################
+#
+#      Input file for OASIS3
+# 
+#      This version is for use with IPSL_CM4_v1 
+#
+#      The file will be edited at runtime to update it for
+#         - the initial date of the run
+#
+###############################################################################
+#  
+#      Input delimiters have to occupy position 1 to 9 !
+#      No blank lines allowed !
+#      Length of input lines <= 80 !
+#
+###############################################################################
+# 
+# SEQMODE : 1        if all models run simultaneously
+#           n        if  n  models run sequentially
+ $SEQMODE
+              1
+ $END
+###############################################################################
+#
+# CHANNEL (CHAR*4)
+#           PIPE        if named pipes + binary files are used 
+#                       for synchro and data respectively (not tested);
+#           MPI1/2      if MPI message passing is used for data exchange;
+#
+ $CHANNEL
+ <lib_mpi>
+ <nproc_atm>  <nproc_atm>
+ <nproc_oce>  <nproc_oce>               
+ $END
+###############################################################################
+#
+# NFIELDS : total number of fields being exchanged.
+#
+ $NFIELDS
+            25
+ $END
+###############################################################################
+#
+# JOBNAME : acronym for the given simulation (CHAR*3)
+#
+ $JOBNAME
+            EXP   
+ $END
+###############################################################################
+#
+# NBMODEL : number of models and their names (CHAR*6).
+#
+ $NBMODEL
+  2  lmdz.x oceanx
+ $END
+###############################################################################
+# 
+# RUNTIME: total simulated time for the actual run in seconds (<I8)
+#
+ $RUNTIME
+ <total_time>
+ $END
+###############################################################################
+#
+# INIDATE (I8)
+#         initial date of the run (YYYYMMDD)         
+#
+ $INIDATE
+ <initial_date>
+ $END
+###############################################################################
+# 
+# MODINFO (YES or NOT)
+#         Indicates whether a header is encapsulated within the field
+#
+ $MODINFO
+  NOT
+ $END
+###############################################################################
+#
+# NLOGPRT: printing level in output file cplout: 
+#              0 = no printing
+#              1 = main routines and field names when treated
+#              2 = complete output
+#
+ $NLOGPRT
+   2
+ $END
+###############################################################################
+#
+# CALTYPE: Calendar type
+#                  0      = 365 day calendar (no leap years)
+#                  1      = 365 day, or 366 days for leap years, calendar
+#                  n (>1) = n day month calendar
+#
+ $CALTYPE
+ <calendar_type>
+ $END
+#
+# 
+###############################################################################
+ $STRINGS
+###############################################################################
+#
+#                      OCEAN  --->>>  ATMOS
+#                      --------------------
+# Field 1 : Weighted sea surface temperature (o->a 1)
+# 
+O_SSTSST  SISUTESW 1 86400  5  sstoc.nc  <output_mode> 
+torc  tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+# LOCTRANS: AVERAGE to average value over coupling period
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mozaic: 1) mapping filename 2) connected unit 3) dataset rank 4) Maximum
+#         number of overlapped neighbors
+wo2a.tsg 93  1  15
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+#
+############################################################################
+#
+# Field 2 : Sea ice extent  (o->a 2)
+#
+OIceFrac SIICECOV 44 86400  5  sstoc.nc <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC  CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 15
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+#
+# Field 3 : Weighted Sea Ice Temperature (o->a 3)
+#
+O_TepIce  SIICTEMW 34 86400  5  sstoc.nc  <output_mode>
+torc  tlmd   LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+wo2a.tsg 93  1  15 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+  NORSUD   WSTEST
+############################################################################
+#
+# Field 4 : Weighted Sea ice albedo (o->a 4)
+#
+O_AlbIce  SIICEALW 17 86400  5  sstoc.nc  <output_mode>
+torc  tlmd  LAG=5760  
+P  2 P  0
+#
+LOCTRANS CHECKIN MOZAIC CHECKOUT  REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 15
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+#
+# Field 5 : Current surface (o->a 5)
+O_OCurx1 CURRENTX 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 15
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1  
+#
+NORSUD   WSTEST
+#
+############################################################################
+#
+# Field 6 : Current surface (o->a 6)
+O_OCury1 CURRENTY 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 15
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#  
+NORSUD   WSTEST
+############################################################################
+#
+# Field 7 : Current surface (o->a 7)
+O_OCurz1 CURRENTZ 321 86400  5  sstoc.nc  <output_mode>
+torc    tlmd  LAG=5760
+P  2 P  0
+LOCTRANS CHECKIN MOZAIC CHECKOUT REVERSE
+ AVERAGE
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+wo2a.tsg 93  1 15
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+NORSUD   WSTEST
+#
+############################################################################
+#
+#                      ATMOSPHERE  --->>>  OCEAN
+#                      -------------------------
+############################################################################   
+#
+# Field 8 : wind stress along X axis (a->o 1)
+#
+COTAUXXU O_OTaux1 23 86400  6  flxat.nc   <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 9 : stress along Y axis (a->o 2)
+#
+COTAUYYU O_OTauy1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 10 :wind stress along Z axis (a->o 3)
+#
+COTAUZZU O_OTauz1 23 86400  6  flxat.nc  <output_mode>
+tlmd    uorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 11 : wind stress along X axis 2 (a->o 4)
+#
+COTAUXXV O_OTaux2  24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 12 : wind stress along Y axis 2 (a->o 5) 
+#
+COTAUYYV O_OTauy2  24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 13 :  wind stress along Z axis 2 (a->o 6) 
+#
+COTAUZZV O_OTauz2  24 86400  6    flxat.nc  <output_mode>
+tlmd    vorc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+# Field 14 :  wind speed 10m (a->o 7) 
+#
+COWINDSP O_Wind10  56 86400  6    flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Mask value
+888888.
+# Extrapolation method
+NINENN 2 1 1
+# Interpolation method
+BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+# 
+#########################################################################
+#
+# Field 15 : Total rain (a->o 8)
+#
+COTOTRAI OTotRain 26 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 16 :  Total snow (a->o 9)
+#
+COTOTSNO  OTotSnow 28 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 17 : Total evap (a->o 10)
+#
+COTOTEVA  OTotEvap 25 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 18 : Evaporation Ice  (a->o 11)
+#
+COICEVAP OIceEvap 41 86400  4   flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+##########################################################################
+#
+# Field 19 : Total solar heat flux (a->o 12)
+#
+COQSRMIX O_QsrMix  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 20 : Total Non solar heat flux (a->o 13)
+#
+COQNSMIX O_QnsMix 6 86400  4   flxat.nc  <output_mode>
+tlmd    torc   LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18 
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+###########################################################################
+#
+# Field 21 : solar heat flux on ice (a->o 14)
+#
+COSHFICE O_QsrIce  7 86400 4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method or mozaic parameters
+wa2o.flx 92  2    18  
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+#
+# Field 22 : Non solar heat flux on ice (a->o 15)
+#
+CONSFICE O_QnsIce 6 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse 
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+############################################################################
+#
+# Field 23 : Non solar heat flux derivative (a->o 16)
+#
+CODFLXDT O_dQnsdT  35 86400  4   flxat.nc  <output_mode>
+tlmd    torc  LAG=1800
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.flx 92  2    18
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 24 : iceberg calving (a->o 17)
+#
+COCALVIN OCalving  36 86400  4  flxat.nc  <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.cal  98   5   47
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+#
+# Field 25 : liquid run-off (river + direct)  (a->o 18)
+#
+COLIQRUN  O_Runoff 32 86400  5  flxat.nc   <output_mode>
+tlmd    torc  LAG=1800 
+P  0 P  2
+INVERT CHECKIN MOZAIC BLASNEW CHECKOUT
+# Reverse
+NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+ INT=1
+# Interpolation method ou parametres mozaic
+wa2o.run 94    4   216
+# change units from m/s to kg/s
+# weights convert from kg/s to kg/m^2/s
+1000.0 0
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+ INT=1
+#
+#########################################################################
+# Field 26 : wind stress module (a->o 19)
+#
+##COTAUMOD  O_TauMod 466 86400  6   flxat.nc   <output_mode>
+##tlmd    torc  LAG=1800 
+##P  0 P  2
+##INVERT CHECKIN MASK EXTRAP INTERP CHECKOUT
+# Reverse
+##NORSUD WSTEST
+# CHECKIN: indicate computation of global, land and sea field integrals.
+## INT=1
+# Mask value
+##888888.
+# Extrapolation method
+##NINENN 2 1 1
+# Interpolation method
+##BICUBIPS  Z   SCALAR
+# CHECKOUT: indicate computation of global, land and sea field integrals.
+## INT=1
+#
+#########################################################################
+#
+ $END
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_ORCA2
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_ORCA2	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_ORCA2	(revision 1950)
@@ -0,0 +1,707 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/OPA  :  1 - run manager      (namrun)
+!! namelists    2 - Domain           (namzgr, namzgr_sco, namdom)
+!!              3 - Surface boundary (namsbc, namsbc_ana, namsbc_flx, namsbc_clio, namsbc_core
+!!                                    namsbc_cpl, namqsr, namsbc_rnf, namsbc_ssr, namsbc_alb)
+!!              4 - lateral boundary (namlbc, namcla, namobc, namagrif, nambdy, nambdy_tide)
+!!              5 - bottom  boundary (nambfr, nambbc, nambbl)
+!!              6 - Tracer           (nameos, namtra_adv, namtra_ldf, namtra_dmp)
+!!              7 - dynamics         (namdyn_adv, namdyn_vor, namdyn_hpg, namdyn_spg, namdyn_ldf)
+!!              8 - Verical physics  (namzdf, namzdf_ric, namzdf_tke, namzdf_kpp, namzdf_ddm, namzdf_tmx)
+!!              9 - diagnostics      (namtrd, namgap, namspr, namflo, namptr)
+!!              9 - miscellaneous    (namsol, nammpp, nammpp_dyndist, namctl)
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!  CAUTION: some scripts does not support CAPITALs for logical use .true./.false., not .TRUE./.FALSE.
+
+!!======================================================================
+!!                   ***  Run management namelists  ***
+!!======================================================================
+!!   namrun            parameters of the run
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namrun        !   parameters of the run
+!-----------------------------------------------------------------------
+   nn_no       =       0   !  job number
+   cn_exp      =  "ORCA2"  !  AUTO - experience name 
+   nn_it000    =       1   !  AUTO - first time step
+   nn_itend    =    5475   !  AUTO - last  time step(std 5475)
+   nn_date0    =  010101   !  AUTO - initial calendar date yymmdd (used if  nn_rstctl=1)
+   nn_leapy    =       0   !  AUTO - Leap year calendar (1) or not (0)
+   nn_istate   =       0   !  output the initial state (1) or not (0)
+   nn_stock    =    5475   !  AUTO - frequency of creation of a restart file (modulo referenced to 1)
+   nn_write    =    5475   !  AUTO - frequency of write in the output file   (modulo referenced to nn_it000)
+   ln_dimgnnn  = .false.   !  DIMG file format: 1 file for all processors (F) or by processor (T)
+   ln_mskland  = .true.    !  mask land points in NetCDF outputs (costly: + ~15%)
+   ln_clobber  = .false.   !  clobber (overwrite) an existing file
+   nn_chunksz  =       0   !  chunksize (bytes) for NetCDF file (working only with iom_nf90 routines)
+   ln_rstart   = .false.   !  AUTO - start from rest (F) or from a restart file (T)
+   nn_rstctl   =       0   !  AUTO - restart control = 0 nn_it000 is not compared to the restart file value
+                           !                  = 1 use nn_date0 in namelist (not the value in the restart file)
+                           !                  = 2 calendar parameters read in the restart file
+   cn_ocerst_in  = "restartopa"!  suffix of ocean restart name (input)
+   cn_ocerst_out = "restart"   !  suffix of ocean restart name (output)
+/
+!!======================================================================
+!!                      ***  Domain namelists  ***
+!!======================================================================
+!!   namzgr       vertical coordinate
+!!   namzgr_sco   s-coordinate or hybrid z-s-coordinate
+!!   namdom       space and time domain (bathymetry, mesh, timestep)
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namzgr        !   vertical coordinate
+!-----------------------------------------------------------------------
+   ln_zco      = .false.   !  z-coordinate - full    steps   (T/F)      ("key_zco" may also be defined)
+   ln_zps      = .true.    !  z-coordinate - partial steps   (T/F)
+   ln_sco      = .false.   !  s- or hybrid z-s-coordinate    (T/F)
+/
+!-----------------------------------------------------------------------
+&namzgr_sco    !   s-coordinate or hybrid z-s-coordinate
+!-----------------------------------------------------------------------
+   rn_sbot_min =  300.     !  minimum depth of s-bottom surface (>0) (m)
+   rn_sbot_max = 5250.     !  maximum depth of s-bottom surface (= ocean depth) (>0) (m)
+   rn_theta    =    6.0    !  surface control parameter (0<=theta<=20)
+   rn_thetb    =    0.75   !  bottom control parameter  (0<=thetb<= 1)
+   rn_rmax     =    0.15   !  maximum cut-off r-value allowed (0<r_max<1)
+   ln_s_sigma  = .false.   !  hybrid s-sigma coordinates
+   rn_bb       =    0.8    !  stretching with s-sigma
+   rn_hc       =  150.0    !  critical depth with s-sigma 
+/
+!-----------------------------------------------------------------------
+&namdom        !   space and time domain (bathymetry, mesh, timestep)
+!-----------------------------------------------------------------------
+   nn_bathy    =    1      !  compute (=0) or read(=1) the bathymetry file
+   nn_closea   =    1      !  closed seas and lakes are removed (=0) or kept (=1) from the ORCA domain
+   nn_msh      =    0      !  AUTO create (=1) a mesh file (coordinates, scale factors, masks) or not (=0)
+   rn_e3zps_min=   20.     !  the thickness of the partial step is set larger than the minimum
+   rn_e3zps_rat=    0.1    !  of e3zps_min and e3zps_rat * e3t   (N.B. 0<e3zps_rat<1)
+                           !
+   rn_rdt      = 5760.     !  time step for the dynamics (and tracer if nacc=0)   ==> 5760
+   nn_baro     =   64      !  number of barotropic time step (for the split explicit algorithm) ("key_dynspg_ts")
+   rn_atfp     =    0.1    !  asselin time filter parameter
+   nn_acc      =    0      !  acceleration of convergence : =1      used, rdt < rdttra(k)
+                                 !                          =0, not used, rdt = rdttra
+   rn_rdtmin   = 28800.          !  minimum time step on tracers (used if nacc=1)
+   rn_rdtmax   = 28800.          !  maximum time step on tracers (used if nacc=1)
+   rn_rdth     =  800.           !  depth variation of tracer time step  (used if nacc=1)
+/
+!!======================================================================
+!!            ***  Surface Boundary Condition namelists  ***
+!!======================================================================
+!!   namsbc        surface boundary condition
+!!   namsbc_ana    analytical         formulation
+!!   namsbc_flx    flux               formulation
+!!   namsbc_clio   CLIO bulk formulea formulation
+!!   namsbc_core   CORE bulk formulea formulation
+!!   namsbc_cpl    CouPLed            formulation                       ("key_coupled")
+!!   namtra_qsr    penetrative solar radiation
+!!   namsbc_rnf    river runoffs
+!!   namsbc_ssr    sea surface restoring term (for T and/or S)
+!!   namsbc_alb    albedo parameters
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namsbc        !   Surface Boundary Condition (surface module)
+!-----------------------------------------------------------------------
+   nn_fsbc     = 5         !  frequency of surface boundary condition computation 
+                           !               (= the frequency of sea-ice model call)
+   ln_ana      = .false.   !  analytical formulation (T => fill namsbc_ana ) 
+   ln_flx      = .false.   !  flux formulation       (T => fill namsbc_flx )
+   ln_blk_clio = .false.   !  CLIO bulk formulation  (T => fill namsbc_clio) 
+   ln_blk_core = .false.   !  CORE bulk formulation  (T => fill namsbc_core) 
+   ln_cpl      = .true.    !  Coupled formulation    (T => fill namsbc_cpl )
+   nn_ice      = 2         !  =0 no ice boundary condition   ,
+                           !  =1 use observed ice-cover      ,
+                           !  =2 ice-model used                             ("key_lim3" or "key_lim2)
+   nn_ico_cpl  = 0         !  ice-ocean coupling : =0 each nn_fsbc 
+                           !                       =1 stresses recomputed each ocean time step ("key_lim3" only)
+                           !                       =2 combination of 0 and 1 cases             ("key_lim3" only)
+   ln_dm2dc    = .false.   !  daily mean to diurnal cycle short wave (qsr)
+   ln_rnf      = .true.    !  runoffs (T => fill namsbc_rnf)
+   ln_ssr      = .false.   !  Sea Surface Restoring on T and/or S (T => fill namsbc_ssr)
+   nn_fwb      = 0         !  FreshWater Budget: =0 unchecked 
+                           !                     =1 global mean of e-p-r set to zero at each time step 
+                           !                     =2 annual global mean of e-p-r set to zero
+                           !                     =3 global emp set to zero and spread out over erp area
+/
+!-----------------------------------------------------------------------
+&namsbc_ana    !   analytical surface boundary condition
+!-----------------------------------------------------------------------
+   nn_tau000   =   0       !  gently increase the stress over the first ntau_rst time-steps
+   rn_utau0    =   0.5     !  uniform value for the i-stress
+   rn_vtau0    =   0.e0    !  uniform value for the j-stress
+   rn_qns0     =   0.e0    !  uniform value for the total heat flux
+   rn_qsr0     =   0.e0    !  uniform value for the solar radiation
+   rn_emp0     =   0.e0    !  uniform value for the freswater budget (E-P)
+/
+!-----------------------------------------------------------------------
+&namsbc_flx    !   surface boundary condition : flux formulation
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) !  variable  ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !    name    !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_utau     = 'utau'       ,        24         ,    'utau'  ,     .false.    , .false. , 'yearly'  , ''       , ''
+   sn_vtau     = 'vtau'       ,        24         ,    'vtau'  ,     .false.    , .false. , 'yearly'  , ''       , ''
+   sn_qtot     = 'qtot'       ,        24         ,    'qtot'  ,     .false.    , .false. , 'yearly'  , ''       , ''
+   sn_qsr      = 'qsr'        ,        24         ,    'qsr'   ,     .false.    , .false. , 'yearly'  , ''       , ''
+   sn_emp      = 'emp'        ,        24         ,    'emp'   ,     .false.    , .false. , 'yearly'  , ''       , ''
+!
+   cn_dir      = './'      !  root directory for the location of the flux files
+/      
+!-----------------------------------------------------------------------
+&namsbc_clio   !   namsbc_clio  CLIO bulk formulea
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) !  variable  ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !    name    !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_utau     = 'taux_1m'    ,       -1          , 'sozotaux' ,    .true.      , .true.  , 'yearly'  , ''       , ''
+   sn_vtau     = 'tauy_1m'    ,       -1          , 'sometauy' ,    .true.      , .true.  , 'yearly'  , ''       , ''
+   sn_wndm     = 'flx'        ,       -1          , 'socliowi' ,    .true.      , .true.  , 'yearly'  , ''       , ''
+   sn_tair     = 'flx'        ,       -1          , 'socliot2' ,    .true.      , .true.  , 'yearly'  , ''       , ''
+   sn_humi     = 'flx'        ,       -1          , 'socliohu' ,    .true.      , .true.  , 'yearly'  , ''       , ''
+   sn_ccov     = 'flx'        ,       -1          , 'socliocl' ,    .false.     , .true.  , 'yearly'  , ''       , ''
+   sn_prec     = 'flx'        ,       -1          , 'socliopl' ,    .false.     , .true.  , 'yearly'  , ''       , ''
+!
+   cn_dir      = './'      !  root directory for the location of the bulk files are
+/
+!-----------------------------------------------------------------------
+&namsbc_core   !   namsbc_core  CORE bulk formulea
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights              ! rotation !
+!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename             ! pairing  !
+   sn_wndi     = 'u10_core'   ,       -1          , 'u10'      ,    .true.      , .true.  , 'yearly'  ,'bicubic_weights_orca2.nc' , 'U1'
+   sn_wndj     = 'v10_core'   ,       -1          , 'v10'      ,    .true.      , .true.  , 'yearly'  ,'bicubic_weights_orca2.nc' , 'V1'
+   sn_qsr      = 'qsw_core'   ,       -1          , 'swdn'     ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+   sn_qlw      = 'qlw_core'   ,       -1          , 'lwdn'     ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+   sn_tair     = 't2_core'    ,       -1          , 't2'       ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+   sn_humi     = 'q2_core'    ,       -1          , 'q2'       ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+   sn_prec     = 'precip_core',       -1          , 'precip'   ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+   sn_snow     = 'snow_core'  ,       -1          , 'snow'     ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+   sn_tdif     = 'taudif_core',       24          , 'taudif'   ,    .true.      , .true.  , 'yearly'  ,'bilinear_weights_orca2.nc', ''
+!
+   cn_dir      = './'      !  root directory for the location of the bulk files
+   ln_2m       = .true.    !  air temperature and humidity referenced at 2m (T) instead 10m (F)
+   ln_taudif   = .false.   !  HF tau contribution: use "mean of stress module - module of the mean stress" data ?
+   rn_pfac     = 1.        !  multiplicative factor for precipitation (total & snow)
+/
+!-----------------------------------------------------------------------
+&namsbc_cpl    !   coupled ocean/atmosphere model                        ("key_coupled")
+!-----------------------------------------------------------------------
+                                       ! send
+cn_snd_temperature= 'weighted oce and ice'  ! 'oce only' 'weighted oce and ice' 'mixed oce-ice'
+cn_snd_albedo     = 'weighted ice'          ! 'none' 'weighted ice' 'mixed oce-ice'
+cn_snd_thickness  = 'none'                  ! 'none' 'weighted ice and snow'
+cn_snd_crt_nature = 'mixed oce-ice'         ! 'none' 'oce only' 'weighted oce and ice' 'mixed oce-ice'
+cn_snd_crt_refere = 'cartesian'             ! 'spherical' 'cartesian'
+cn_snd_crt_orient = 'eastward-northward'    ! 'eastward-northward' or 'local grid'
+cn_snd_crt_grid   = 'T'                     ! 'T'
+                                       ! receive
+cn_rcv_w10m       = 'coupled'               ! 'none' 'coupled'
+cn_rcv_taumod     = 'none'                  ! 'none' 'coupled'
+cn_rcv_tau_nature = 'mixed oce-ice'         ! 'oce only' 'oce and ice' 'mixed oce-ice'
+cn_rcv_tau_refere = 'cartesian'             ! 'spherical' 'cartesian'
+cn_rcv_tau_orient = 'eastward-northward'    ! 'eastward-northward' or 'local grid'
+cn_rcv_tau_grid   = 'U,V'                   ! 'T' 'U,V' 'U,V,F' 'U,V,I' 'T,F' 'T,I' 'T,U,V'
+cn_rcv_dqnsdt     = 'coupled'               ! 'none' 'coupled'
+cn_rcv_qsr        = 'conservative'          ! 'conservative' 'oce and ice' 'mixed oce-ice'
+cn_rcv_qns        = 'conservative'          ! 'conservative' 'oce and ice' 'mixed oce-ice'
+cn_rcv_emp        = 'conservative'          ! 'conservative' 'oce and ice' 'mixed oce-ice'
+cn_rcv_rnf        = 'coupled'               ! 'coupled' 'climato' 'mixed'
+cn_rcv_cal        = 'coupled'               ! 'none' 'coupled'
+/
+!-----------------------------------------------------------------------
+&namsbc_cpl_co2   !   coupled ocean/biogeo/atmosphere model            ("key_cpl_carbon_cycle")
+!-----------------------------------------------------------------------
+cn_snd_co2        = 'coupled'         ! send    :  'none' 'coupled'
+cn_rcv_co2        = 'coupled'         ! receive : 'none' 'coupled'
+/
+!-----------------------------------------------------------------------
+&namtra_qsr    !   penetrative solar radiation
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_chl      = 'chlorophyll',        -1         , 'CHLA'     ,    .true.      , .true.  , 'yearly'  , ''       , ''
+ 
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   ln_traqsr   = .true.    !  Light penetration (T) or not (F)
+   ln_qsr_rgb  = .false.   !  RGB (Red-Green-Blue) light penetration
+   ln_qsr_2bd  = .false.   !  2 bands              light penetration
+   ln_qsr_bio  = .true.    !  bio-model light penetration
+   nn_chldta   =      0    !  RGB : Chl 2D data (=1), 3D data (=2) or cst value (=0)
+   rn_abs      =   0.58    !  RGB & 2 bands: fraction of light (rn_si1)
+   rn_si0      =   0.35    !  RGB & 2 bands: shortess depth of extinction
+   rn_si1      =   23.0    !  2 bands: longest depth of extinction
+   rn_si2      =   62.0    !  3 bands: longest depth of extinction (for blue waveband & 0.01 mg/m2 Chl)
+/
+!-----------------------------------------------------------------------
+&namsbc_rnf    !   runoffs namelist surface boundary condition
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_rnf      = 'runoff_1m_nomask' ,  -1         , 'sorunoff' ,    .true.      , .true.  , 'yearly'  , ''       , ''
+   sn_cnf      = 'runoff_1m_nomask' ,   0         , 'socoefr'  ,    .false.     , .true.  , 'yearly'  , ''       , ''
+ 
+   cn_dir       = './'      !  root directory for the location of the runoff files
+   ln_rnf_emp   =   .true.  !  runoffs included into precipitation field (T) or into a file (F)
+   ln_rnf_mouth =   .true.  !  specific treatment at rivers mouths
+   rn_hrnf      =   15.e0   !  depth over which enhanced vertical mixing is used
+   rn_avt_rnf   =   1.e-3   !  value of the additional vertical mixing coef. [m2/s]
+   rn_rfact     =   1.e0    !  multiplicative factor for runoff
+/
+!-----------------------------------------------------------------------
+&namsbc_ssr    !   surface boundary condition : sea surface restoring
+!-----------------------------------------------------------------------
+!              !   file name  ! frequency (hours) ! variable   ! time interpol. !  clim   ! 'yearly'/ ! weights  ! rotation !
+!              !              !  (if <0  months)  !   name     !    (logical)   !  (T/F)  ! 'monthly' ! filename ! pairing  !
+   sn_sst      = 'sst_data'   ,        24         ,  'sst'     ,     .false.    , .false. , 'yearly'  , ''       , ''
+   sn_sss      = 'sss_data'   ,        -1         ,  'sss'     ,     .true.     , .true.  , 'yearly'  , ''       , ''
+    
+   cn_dir      = './'      !  root directory for the location of the runoff files
+   nn_sstr     =     0     !  add a retroaction term in the surface heat       flux (=1) or not (=0)
+   nn_sssr     =     2     !  add a damping     term in the surface freshwater flux (=2) 
+                           !  or to SSS only (=1) or no damping term (=0)
+   rn_dqdt     =   -40.    !  magnitude of the retroaction on temperature   [W/m2/K]
+   rn_deds     =   -27.7   !  magnitude of the damping on salinity   [mm/day/psu]
+   ln_sssr_bnd =   .true.  !  flag to bound erp term (associated with nn_sssr=2)
+   rn_sssr_bnd =   4.e0    !  ABS(Max/Min) value of the damping erp term [mm/day]
+/      
+!-----------------------------------------------------------------------
+&namsbc_alb    !   albedo parameters
+!-----------------------------------------------------------------------
+   rn_cloud    =    0.0    !  cloud correction to snow and ice albedo 
+   rn_albice   =    0.5    !  albedo of melting ice in the arctic and antarctic
+   rn_alphd    =    0.80   !  coefficients for linear interpolation used to
+   rn_alphc    =    0.65   !  compute albedo between two extremes values 
+   rn_alphdi   =    0.72   !  (Pyane, 1972)
+/
+
+!!======================================================================
+!!               ***  Lateral boundary condition  ***
+!!======================================================================
+!!   namlbc        lateral momentum boundary condition
+!!   namcla        cross land advection
+!!   namobc        open boundaries parameters                           ("key_obc")
+!!   namagrif      agrif nested grid ( read by child model only )       ("key_agrif") 
+!!   nambdy        Unstructured open boundaries                         ("key_bdy")
+!!   namtide       Tidal forcing at open boundaries                     ("key_bdy_tides")
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namlbc        !   lateral momentum boundary condition
+!-----------------------------------------------------------------------
+   rn_shlat    =    2.     !  shlat = 0  !  0 < shlat < 2  !  shlat = 2  !  2 < shlat
+                           !  free slip  !   partial slip  !   no slip   ! strong slip
+/
+!-----------------------------------------------------------------------
+&namcla        !   cross land advection
+!-----------------------------------------------------------------------
+   nn_cla      =    0      !  advection between 2 ocean pts separates by land
+/
+!-----------------------------------------------------------------------
+&namobc        !   open boundaries parameters                           ("key_obc")
+!-----------------------------------------------------------------------
+    ln_obc_clim= .false.   !  climatological obc data files (T) or not (F)
+    ln_vol_cst = .true.    !  impose the total volume conservation (T) or not (F)
+    ln_obc_fla = .false.   !  Flather open boundary condition 
+    nn_obcdta  =    1      !  = 0 the obc data are equal to the initial state
+                           !  = 1 the obc data are read in 'obc.dta' files
+    cn_obcdta  = 'annual'  !  set to annual if obc datafile hold 1 year of data
+                           !  set to monthly if obc datafile hold 1 month of data
+    rn_dpein   =    1.     !  damping time scale for inflow at east  open boundary
+    rn_dpwin   =    1.     !     -           -         -       west    -      -
+    rn_dpnin   =    1.     !     -           -         -       north   -      -
+    rn_dpsin   =    1.     !     -           -         -       south   -      -
+    rn_dpeob   = 3000.     !  time relaxation (days) for the east  open boundary
+    rn_dpwob   =   15.     !     -           -         -     west    -      -
+    rn_dpnob   = 3000.     !     -           -         -     north   -      -
+    rn_dpsob   =   15.     !     -           -         -     south   -      -
+    rn_volemp  =  1.       !  = 0 the total volume change with the surface flux (E-P-R)
+                           !  = 1 the total volume remains constant
+/
+!-----------------------------------------------------------------------
+&namagrif      !  AGRIF zoom                                            ("key_agrif")
+!-----------------------------------------------------------------------
+    nn_cln_update = 3      !  baroclinic update frequency
+    ln_spc_dyn    = .true. !  use 0 as special value for dynamics
+    rn_sponge_tra = 2880.  !  coefficient for tracer   sponge layer [s]
+    rn_sponge_dyn = 2880.  !  coefficient for dynamics sponge layer [s]
+/
+!-----------------------------------------------------------------------
+&nambdy        !  unstructured open boundaries                          ("key_bdy")
+!-----------------------------------------------------------------------
+    filbdy_mask    =  ''                  !  name of mask file (if ln_bdy_mask=.TRUE.)
+    filbdy_data_T  = 'bdydata_grid_T.nc'  !  name of data file (T-points)
+    filbdy_data_U  = 'bdydata_grid_U.nc'  !  name of data file (U-points)
+    filbdy_data_V  = 'bdydata_grid_V.nc'  !  name of data file (V-points)
+    ln_bdy_clim    = .false.              !  contain 1 (T) or 12 (F) time dumps and be cyclic
+    ln_bdy_vol     = .true.               !  total volume correction (see volbdy parameter)
+    ln_bdy_mask    = .false.              !  boundary mask from filbdy_mask (T) or boundaries are on edges of domain (F)
+    ln_bdy_tides   = .true.               !  Apply tidal harmonic forcing with Flather condition
+    ln_bdy_dyn_fla = .true.               !  Apply Flather condition to velocities
+    ln_bdy_tra_frs = .false.              !  Apply FRS condition to temperature and salinity 
+    ln_bdy_dyn_frs = .false.              !  Apply FRS condition to velocities
+    nbdy_dta       =  1                   !  = 0, bdy data are equal to the initial state
+                                          !  = 1, bdy data are read in 'bdydata   .nc' files
+    nb_rimwidth    = 9                    !  width of the relaxation zone
+    volbdy         = 0                    !  = 0, the total water flux across open boundaries is zero
+                                          !  = 1, the total volume of the system is conserved
+/
+!-----------------------------------------------------------------------
+&nambdy_tide     ! tidal forcing at unstructured boundaries              
+!-----------------------------------------------------------------------
+    filtide      = 'bdytide_'           !  file name root of tidal forcing files
+    tide_cpt     = 'M2','S1'            !  names of tidal components used
+    tide_speed   = 28.984106, 15.000001 !  phase speeds of tidal components (deg/hour)
+    ln_tide_date = .false.              !  adjust tidal harmonics for start date of run
+/
+
+!!======================================================================
+!!                 ***  Bottom boundary condition  ***
+!!======================================================================
+!!   nambfr        bottom friction
+!!   nambbc        bottom temperature boundary condition                ("key_trabbc")
+!!   nambbl        bottom boundary layer scheme                         ("key_trabbl_dif","key_trabbl_adv")
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&nambfr        !   bottom friction
+!-----------------------------------------------------------------------
+   nn_bfr      =    1      !  type of bottom friction :   = 0 : free slip,  = 1 : linear friction
+                           !                              = 2 : nonlinear friction
+   rn_bfri1    =    4.e-4  !  bottom drag coefficient (linear case)
+   rn_bfri2    =    1.e-3  !  bottom drag coefficient (non linear case)
+   rn_bfeb2    =    2.5e-3 !  bottom turbulent kinetic energy background  (m^2/s^2)
+   ln_bfr2d    =   .false. !  horizontal variation of the bottom friction coef (read a 2D mask file )
+   rn_bfrien   =    50.    !  local multiplying factor of bfr (ln_bfr2d = .true.)
+/
+!-----------------------------------------------------------------------
+&nambbc        !   bottom temperature boundary condition
+!-----------------------------------------------------------------------
+   nn_geoflx   =    2      !  geothermal heat flux: = 0 no flux 
+                           !     = 1 constant flux
+                           !     = 2 variable flux (read in geothermal_heating.nc in mW/m2) 
+   rn_geoflx_cst = 86.4e-3 !  Constant value of geothermal heat flux [W/m2]
+/
+!-----------------------------------------------------------------------
+&nambbl        !   bottom boundary layer scheme
+!-----------------------------------------------------------------------
+!                          !  diffusive bbl                             ("key_trabbl")
+!                          !  advective bbl                             ("key_trabbl_adv")
+   rn_ahtbbl   =  10000.   !  lateral mixing coefficient in the bbl  [m2/s]
+/
+!!======================================================================
+!!                        Tracer (T & S ) namelists
+!!======================================================================
+!!   nameos        equation of state
+!!   namtra_adv    advection scheme
+!!   namtra_ldf    lateral diffusion scheme
+!!   namtra_dmp    T & S newtonian damping                              ("key_tradmp")
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&nameos        !   ocean physical parameters
+!-----------------------------------------------------------------------
+   nn_eos      =    0      !  type of equation of state and Brunt-Vaisala frequency
+                           !     = 0, UNESCO (formulation of Jackett and McDougall (1994) and of McDougall (1987) )
+                           !     = 1, linear: rho(T)   = rau0 * ( 1.028 - ralpha * T )
+                           !     = 2, linear: rho(T,S) = rau0 * ( rbeta * S - ralpha * T )
+   rn_alpha    =    2.e-4  !  thermal expension coefficient (neos= 1 or 2)
+   rn_beta     =    0.001  !  saline  expension coefficient (neos= 2)
+/
+!-----------------------------------------------------------------------
+&namtra_adv    !   advection scheme for tracer 
+!-----------------------------------------------------------------------
+   ln_traadv_cen2   =  .false.  !  2nd order centered scheme   
+   ln_traadv_tvd    =  .true.   !  TVD scheme                
+   ln_traadv_muscl  =  .false.  !  MUSCL scheme             
+   ln_traadv_muscl2 =  .false.  !  MUSCL2 scheme + cen2 at boundaries  
+   ln_traadv_ubs    =  .false.  !  UBS scheme                 
+/
+!-----------------------------------------------------------------------
+&namtra_ldf    !   lateral diffusion scheme for tracer 
+!-----------------------------------------------------------------------
+                           !  Type of the operator : 
+   ln_traldf_lap    =  .true.   !     laplacian operator       
+   ln_traldf_bilap  =  .false.  !     bilaplacian operator     
+                           !  Direction of action  :
+   ln_traldf_level  =  .false.  !     iso-level                
+   ln_traldf_hor    =  .false.  !     horizontal (geopotential)         (require "key_ldfslp" when ln_sco=T)
+   ln_traldf_iso    =  .true.   !     iso-neutral                       (require "key_ldfslp")
+                           !  Coefficient
+   rn_aht_0         =  2000.    !     horizontal eddy diffusivity for tracers [m2/s]
+   rn_ahtb_0        =     0.    !     background eddy diffusivity for ldf_iso [m2/s]
+   rn_aeiv_0        =  2000.    !     eddy induced velocity coefficient [m2/s]    (require "key_traldf_eiv")
+/
+!-----------------------------------------------------------------------
+&namtra_dmp    !   tracer: T & S newtonian damping                      ('key_tradmp')
+!-----------------------------------------------------------------------
+   nn_hdmp     =   -1      !  horizontal shape =-1, damping in Med and Red Seas only
+                           !                   =XX, damping poleward of XX degrees (XX>0)
+                           !                      + F(distance-to-coast) + Red and Med Seas
+   nn_zdmp     =    1      !  vertical   shape =0    damping throughout the water column
+                           !                   =1 no damping in the mixing layer (kz  criteria)
+                           !                   =2 no damping in the mixed  layer (rho crieria)
+   rn_surf     =   50.     !  surface time scale of damping   [days]
+   rn_bot      =  360.     !  bottom  time scale of damping   [days]
+   rn_dep      =  800.     !  depth of transition between rn_surf and rn_bot [meters]
+   nn_file     =    1      !  create a damping.coeff NetCDF file (=1) or not (=0)
+/
+!!======================================================================
+!!                      ***  Dynamics namelists  ***
+!!======================================================================
+!!   namdyn_adv    formulation of the momentum advection
+!!   namdyn_vor    advection scheme
+!!   namdyn_hpg    hydrostatic pressure gradient
+!!   namdyn_spg    surface pressure gradient                            (CPP key only)
+!!   namdyn_ldf    lateral diffusion scheme
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namdyn_adv    !   formulation of the momentum advection
+!-----------------------------------------------------------------------
+   ln_dynadv_vec = .true.  !  vector form (T) or flux form (F)  
+   ln_dynadv_cen2= .false. !  flux form - 2nd order centered scheme
+   ln_dynadv_ubs = .false. !  flux form - 3rd order UBS      scheme 
+/  
+!-----------------------------------------------------------------------
+&namdyn_vor    !   option of physics/algorithm (not control by CPP keys)
+!-----------------------------------------------------------------------
+   ln_dynvor_ene = .false. !  enstrophy conserving scheme  
+   ln_dynvor_ens = .false. !  energy conserving scheme    
+   ln_dynvor_mix = .false. !  mixed scheme               
+   ln_dynvor_een = .true.  !  energy & enstrophy scheme  
+/
+!-----------------------------------------------------------------------
+&namdyn_hpg    !   Hydrostatic pressure gradient option
+!-----------------------------------------------------------------------
+   ln_hpg_zco  = .false.   !  z-coordinate - full steps                   
+   ln_hpg_zps  = .true.    !  z-coordinate - partial steps (interpolation)
+   ln_hpg_sco  = .false.   !  s-coordinate (standard jacobian formulation)
+   ln_hpg_hel  = .false.   !  s-coordinate (helsinki modification)
+   ln_hpg_wdj  = .false.   !  s-coordinate (weighted density jacobian)
+   ln_hpg_djc  = .false.   !  s-coordinate (Density Jacobian with Cubic polynomial)
+   ln_hpg_rot  = .false.   !  s-coordinate (ROTated axes scheme)
+   rn_gamma    = 0.e0      !  weighting coefficient (wdj scheme)
+   ln_dynhpg_imp = .false. !  time stepping: semi-implicit time scheme  (T)
+                                 !           centered      time scheme  (F)
+   nn_dynhpg_rst =  0            ! =1 dynhpg restartable restart or not (=0)
+/
+!-----------------------------------------------------------------------
+!namdyn_spg    !   surface pressure gradient   (CPP key only)
+!-----------------------------------------------------------------------
+!                          !  explicit free surface                     ("key_dynspg_exp")
+!                          !  filtered free surface                     ("key_dynspg_flt")
+!                          !  split-explicit free surface               ("key_dynspg_ts")
+
+!-----------------------------------------------------------------------
+&namdyn_ldf    !   lateral diffusion on momentum
+!-----------------------------------------------------------------------
+                           !  Type of the operator : 
+   ln_dynldf_lap    =  .true.   !  laplacian operator         
+   ln_dynldf_bilap  =  .false.  !  bilaplacian operator    
+                           !  Direction of action  : 
+   ln_dynldf_level  =  .false.  !  iso-level               
+   ln_dynldf_hor    =  .true.   !  horizontal (geopotential)            (require "key_ldfslp" in s-coord.)
+   ln_dynldf_iso    =  .false.  !  iso-neutral                          (require "key_ldfslp")
+                           !  Coefficient
+   rn_ahm_0    = 40000.         !  horizontal eddy viscosity   [m2/s]
+   rn_ahmb_0   =     0.         !  background eddy viscosity for ldf_iso [m2/s]
+/
+!!======================================================================
+!!             Tracers & Dynamics vertical physics namelists
+!!======================================================================
+!!       namzdf        vertical physics
+!!       namzdf_ric    richardson number dependent vertical mixing      ("key_zdfric"      )
+!!       namzdf_tke    TKE dependent vertical mixing                    ("key_zdftke"      )
+!!       namzdf_kpp    KPP dependent vertical mixing                    ("key_zdfkpp"      )
+!!       namzdf_ddm    double diffusive mixing parameterization         ("key_zdfddm"      )
+!!       namzdf_tmx    tidal mixing parameterization                    ("key_zdftmx"      )
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namzdf        !   vertical physics
+!-----------------------------------------------------------------------
+   rn_avm0     =   1.2e-4  !  vertical eddy viscosity   [m2/s]          (background Kz if not "key_zdfcst")
+   rn_avt0     =   1.2e-5  !  vertical eddy diffusivity [m2/s]          (background Kz if not "key_zdfcst")
+   nn_avb      =    0      !  profile for background avt & avm (=1) or not (=0)
+   nn_havtb    =    0      !  horizontal shape for avtb (=1) or not (=0)
+   ln_zdfevd   = .true.    !  enhanced vertical diffusion (evd) (T) or not (F)
+   nn_evdm     =    0      !  evd apply on tracer (=0) or on tracer and momentum (=1)
+   rn_avevd    =  100.     !  evd mixing coefficient [m2/s]
+   ln_zdfnpc   = .false.   !  Non-Penetrative algorithm (T) or not (F)
+   nn_npc      =    1            !  frequency of application of npc
+   nn_npcp     =  365            !  npc control print frequency
+   ln_zdfexp   = .false.   !  time-stepping: split-explicit (T) or implicit (F) time stepping
+   nn_zdfexp   =    3            !  number of sub-timestep for ln_zdfexp=T
+/
+!-----------------------------------------------------------------------
+&namzdf_ric    !   richardson number dependent vertical diffusion       ("key_zdfric" )
+!-----------------------------------------------------------------------
+   rn_avmri    = 100.e-4   !  maximum value of the vertical viscosity
+   rn_alp      =   5.      !  coefficient of the parameterization
+   nn_ric      =   2       !  coefficient of the parameterization
+/
+!-----------------------------------------------------------------------
+&namzdf_tke    !   turbulent eddy kinetic dependent vertical diffusion  ("key_zdftke")
+!-----------------------------------------------------------------------
+   rn_ediff    =   0.1     !  coef. for vertical eddy coef. (avt=rn_ediff*mxl*sqrt(e) )
+   rn_ediss    =   0.7     !  coef. of the Kolmogoroff dissipation
+   rn_ebb      =  60.      !  coef. of the surface input of tke
+   rn_emin     =   1.e-6   !  minimum value of tke [m2/s2]
+   rn_emin0    =   1.e-4   !  surface minimum value of tke [m2/s2]
+   rn_bshear   =   1.e-20  !  background shear (>0)
+   nn_mxl      =   2       !  mixing length: = 0 bounded by the distance to surface and bottom
+                           !                 = 1 bounded by the local vertical scale factor
+                           !                 = 2 first vertical derivative of mixing length bounded by 1
+                           !                 = 3 same criteria as case 2 but applied in a different way
+   nn_pdl      =   1       !  Prandtl number function of richarson number (=1, avt=pdl(Ri)*avm) or not (=0, avt=avm)
+   ln_mxl0     = .true.    !  mixing length scale surface value as function of wind stress (T) or not (F)
+   rn_lmin     =   0.001   !  interior buoyancy lenght scale minimum value
+   rn_lmin0    =   0.01    !  surface  buoyancy lenght scale minimum value
+   nn_etau     =   0       !  exponentially deceasing penetration of tke due to internal & intertial waves
+                           !        = 0 no penetration ( O(2 km) resolution)
+                           !        = 1 additional tke source (rn_efr * en)
+                           !        = 2 additional tke source (rn_efr * en) applied only at the base of the mixed layer
+                           !        = 3 additional tke source (HF contribution: mean of stress module - module of mean stress)
+   nn_htau     =   1       !  type of exponential decrease of tke penetration
+                           !        = 0  constant 10 m length scale
+                           !        = 1  0.5m at the equator to 30m at high latitudes
+                           !        = 2  30 meters constant depth penetration
+                           !  otion used only if nn_etau = 1 or 2: 
+   rn_efr      =   0.05    !     fraction of surface tke value which penetrates inside the ocean
+                           !  otion used only if nn_etau = 3:
+   rn_addhft   =  -1.e-3   !     add offset   applied to the "mean of stress module - module of mean stress" (always kept > 0)
+   rn_sclhft   =   1.      !     scale factor applied to the "mean of stress module - module of mean stress"
+   ln_lc       = .true.    !  Langmuir cell parameterisation
+   rn_lc       =   0.15    !  coef. associated to Langmuir cells
+/
+!------------------------------------------------------------------------
+&namzdf_kpp    !   K-Profile Parameterization dependent vertical mixing  ("key_zdfkpp", and optionnally:
+!------------------------------------------------------------------------ "key_kppcustom" or "key_kpplktb")
+   ln_kpprimix = .true.    !  shear instability mixing 
+   rn_difmiw   =  1.0e-04  !  constant internal wave viscosity [m2/s]
+   rn_difsiw   =  0.1e-04  !  constant internal wave diffusivity [m2/s]
+   rn_riinfty  =  0.8      !  local Richardson Number limit for shear instability
+   rn_difri    =  0.0050   !  maximum shear mixing at Rig = 0    [m2/s]
+   rn_bvsqcon  = -0.01e-07 !  Brunt-Vaisala squared for maximum convection [1/s2] 
+   rn_difcon   =  1.       !  maximum mixing in interior convection [m2/s] 
+   nn_avb      =  0        !  horizontal averaged (=1) or not (=0) on avt and amv
+   nn_ave      =  1        !  constant (=0) or profile (=1) background on avt
+/
+!-----------------------------------------------------------------------
+&namzdf_ddm    !   double diffusive mixing parameterization             ("key_zdfddm")
+!-----------------------------------------------------------------------
+   rn_avts     = 1.e-4     !  maximum avs (vertical mixing on salinity)
+   rn_hsbfr    = 1.6       !  heat/salt buoyancy flux ratio
+/
+!-----------------------------------------------------------------------
+&namzdf_tmx    !   tidal mixing parameterization                        ("key_zdftmx")
+!-----------------------------------------------------------------------
+   rn_htmx     = 500.      !  vertical decay scale for turbulence (meters)
+   rn_n2min    = 1.e-8     !  threshold of the Brunt-Vaisala frequency (s-1)
+   rn_tfe      = 0.333     !  tidal dissipation efficiency
+   rn_me       = 0.2       !  mixing efficiency 
+   ln_tmx_itf  = .TRUE.    !  ITF specific parameterisation
+   rn_tfe_itf  = 1.        !  ITF tidal dissipation efficiency
+/
+!!======================================================================
+!!                  ***  Miscelaneous namelists  ***
+!!======================================================================
+!!   nammpp            Massively Parallel Processing                    ("key_mpp_mpi)
+!!   nammpp_dyndist    Massively Parallel domain decomposition          ("key_agrif" && "key_mpp_dyndist")
+!!   namctl            Control prints & Benchmark
+!!   namsol            elliptic solver / island / free surface 
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namsol        !   elliptic solver / island / free surface 
+!-----------------------------------------------------------------------
+   nn_solv     =      1    !  elliptic solver: =1 preconditioned conjugate gradient (pcg)
+                           !                   =2 successive-over-relaxation (sor)
+   nn_sol_arp  =      0    !  absolute/relative (0/1) precision convergence test
+   rn_eps      =  1.e-6    !  absolute precision of the solver
+   nn_nmin     =    300    !  minimum of iterations for the SOR solver
+   nn_nmax     =    800    !  maximum of iterations for the SOR solver
+   nn_nmod     =     10    !  frequency of test for the SOR solver
+   rn_resmax   =  1.e-10   !  absolute precision for the SOR solver
+   rn_sor      =  1.92     !  optimal coefficient for SOR solver (to be adjusted with the domain)
+/
+!-----------------------------------------------------------------------
+&nammpp        !   Massively Parallel Processing                        ("key_mpp_mpi)
+!-----------------------------------------------------------------------
+   cn_mpi_send =  'I'      !  mpi send/recieve type   ='S', 'B', or 'I' for standard send,
+                           !  buffer blocking send or immediate non-blocking sends, resp.
+   nn_buffer   =   0       !  size in bytes of exported buffer ('B' case), 0 no exportation
+/
+!-----------------------------------------------------------------------
+&nammpp_dyndist !   Massively Parallel Distribution for AGRIF zoom      ("key_agrif" && "key_mpp_dyndist")
+!-----------------------------------------------------------------------
+   jpni        =    1      !  jpni   number of processors following i
+   jpnj        =    1      !  jpnj   number of processors following j
+   jpnij       =    1      !  jpnij  number of local domains
+/
+!-----------------------------------------------------------------------
+&namctl        !   Control prints & Benchmark
+!-----------------------------------------------------------------------
+   ln_ctl      = .false.   !  trends control print (expensive!)
+   nn_print    =    0      !  level of print (0 no extra print)
+   nn_ictls    =    0      !  start i indice of control sum (use to compare mono versus
+   nn_ictle    =    0      !  end   i indice of control sum        multi processor runs
+   nn_jctls    =    0      !  start j indice of control               over a subdomain)
+   nn_jctle    =    0      !  end   j indice of control
+   nn_isplt    =    1      !  number of processors in i-direction
+   nn_jsplt    =    1      !  number of processors in j-direction
+   nn_bench    =    0      !  Bench mode (1/0): CAUTION use zero except for bench
+                           !     (no physical validity of the results)
+   nn_bit_cmp  =    0      !  bit comparison mode (1/0): CAUTION use zero except for test
+                           !     of comparison between single and multiple processor runs
+/
+
+!!======================================================================
+!!                       ***  Diagnostics namelists  ***
+!!======================================================================
+!!   namtrd       dynamics and/or tracer trends                         ("key_trddyn","key_trdtra","key_trdmld")
+!!   namgap       level mean model-data gap                             ("key_diagap")
+!!   namflo       float parameters                                      ("key_float")
+!!   namptr       Poleward Transport Diagnostics
+!!======================================================================
+
+!-----------------------------------------------------------------------
+&namtrd        !   diagnostics on dynamics and/or tracer trends         ("key_trddyn" and/or "key_trdtra")
+!              !       or mixed-layer trends or barotropic vorticity    ('key_trdmld' or  "key_trdvor")
+!-----------------------------------------------------------------------
+   nn_trd      = 365       !  time step frequency dynamics and tracers trends
+   nn_ctls     =   0       !  control surface type in mixed-layer trends (0,1 or n<jpk)
+   rn_ucf      =   1.      !  unit conversion factor (=1 -> /seconds ; =86400. -> /day)
+   cn_trdrst_in      = "restart_mld"   ! suffix of ocean restart name (input)
+   cn_trdrst_out     = "restart_mld"   ! suffix of ocean restart name (output)
+   ln_trdmld_restart = .false.         !  restart for ML diagnostics
+   ln_trdmld_instant = .false.         !  flag to diagnose trends of instantantaneous or mean ML T/S
+/
+!-----------------------------------------------------------------------
+&namgap       !   level mean model-data gap                             ('key_diagap')
+!-----------------------------------------------------------------------
+   nn_gap     =  15        !  time-step frequency of model-data gap computation
+   nn_prg     =  10        !  AUTO - time-step frequency of gap print in model output
+/
+!-----------------------------------------------------------------------
+&namflo       !   float parameters                                      ("key_float")
+!-----------------------------------------------------------------------
+    ln_rstflo = .false.    !  float restart (T) or not (F)
+    nn_writefl=      75    !  frequency of writing in float output file 
+    nn_stockfl=    5475    !  frequency of creation of the float restart file 
+    ln_argo   = .false.    !  Argo type floats (stay at the surface each 10 days)
+    ln_flork4 = .false.    !  trajectories computed with a 4th order Runge-Kutta (T)
+                           !  or computed with Blanke' scheme (F)
+/
+!-----------------------------------------------------------------------
+&namptr       !   Poleward Transport Diagnostic
+!-----------------------------------------------------------------------
+   ln_diaptr  = .true.     !  Poleward heat and salt transport (T) or not (F)
+   ln_diaznl  = .true.     !  Add zonal means and meridional stream functions
+   ln_subbas  = .true.     !  Atlantic/Pacific/Indian basins computation (T) or not 
+                           !  (orca configuration only, need input basins mask file named "subbasins.nc"
+   ln_ptrcomp = .true.     !  Add decomposition : overturning
+   nf_ptr     =  1         !  Frequency of ptr computation [time step]
+   nf_ptr_wri =  15        !  AUTO - Frequency of ptr outputs
+/
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_ice_ORCA2
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_ice_ORCA2	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_ice_ORCA2	(revision 1950)
@@ -0,0 +1,134 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/LIM2 :  1 - dynamics/advection/thermo          (namicerun)
+!! namelists    2 - ice intialisation                  (namiceini)
+!!              3 - ice dynamic                        (namicedyn)
+!!              5 - ice advection                      (namicetrp)
+!!              6 - thermodynamic                      (namicethd)
+!!              7 - ice salinity                       (namicesal)
+!!              8 - mechanical redistribution of ice   (namiceitdme)
+!!              3 - ice diagnostics                    (namicedia)
+!!              9 - ice outputs                        (namiceout)
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
+!-----------------------------------------------------------------------
+&namicerun     !   Share parameters for dynamics/advection/thermo
+!-----------------------------------------------------------------------
+   cn_icerst_in  = "restart_ice_in"   !  suffix of ice restart name (input)
+   cn_icerst_out = "restart_ice"      !  suffix of ice restart name (output)
+   ln_limdyn   = .true.    !  ice dynamics (T) or thermodynamics only (F)
+   ln_limdmp   = .false.   !  restoring ice thickness and fraction leads (T) or not (F)
+   acrit       = 1.0e-06   , 1.0e-06   ! minimum fraction for leads in the Northern (Southern) Hemisphere
+   hsndif      =  0.0      !  computation of temperature in snow (=0.0) or not
+   hicdif      =  0.0      !  computation of temperature in ice  (=0.0) or not (=9999.0)
+/
+!-----------------------------------------------------------------------
+&namiceini     !   ice initialisation
+!-----------------------------------------------------------------------
+   ln_limini   = .false.   !  read the ice initial state in the file 'Ice_initialization.nc' (T) or not (F)
+   ttest       =  2.0      !  threshold water temperature for initial sea ice
+   hninn       =  0.5      !  initial snow thickness in the north
+   hginn       =  3.0      !  initial ice  thickness in the north
+   alinn       =  0.05     !  initial leads area     in the north
+   hnins       =  0.1      !  same  three parameter  in the south
+   hgins       =  1.0      !        "                 "     south   
+   alins       =  0.1      !        "                 "     south
+/
+!-----------------------------------------------------------------------
+&namicedyn     !   ice dynamic
+!-----------------------------------------------------------------------
+   epsd        =   1.0e-20 !  tolerance parameter
+   alpha       =   0.5     !  coefficient for semi-implicit coriolis
+   dm          =   0.6e+03 !  diffusion constant for dynamics
+   nbiter      =   1       !  number of sub-time steps for relaxation
+   nbitdr      = 100       !  maximum number of iterations for relaxation
+   om          =   0.5     !  relaxation constant 
+   resl        =   5.0e-05 !  maximum value for the residual of relaxation
+   cw          =   5.0e-03 !  drag coefficient for oceanic stress
+   angvg       =   0.0     !  turning angle for oceanic stress
+   pstar       =   1.0e+04 !  1st bulk-rheology parameter
+   c_rhg       =  20.0     !  2nd bulk-rhelogy parameter
+   etamn       =   0.0e+07 !  minimun value for viscosity
+   creepl      =   2.0e-08 !  creep limit
+   ecc         =   2.0     !  eccentricity of the elliptical yield curve
+   ahi0        = 350.e0    !  horizontal eddy diffusivity coefficient for sea-ice [m2/s]
+/
+!-----------------------------------------------------------------------
+&namicetrp     !   ice transport
+!-----------------------------------------------------------------------
+   bound       =   0.      !  boundary conditions (=0.0 no-slip, =1.0 free-slip)
+/
+!-----------------------------------------------------------------------
+&namicethd     !   ice thermodynamic
+!-----------------------------------------------------------------------
+!  hmelt       : maximum melting at the bottom
+!  hiccrit(1/2): ice thickness for lateral accretion in the Northern (Southern) Hemisphere
+!                caution 1.0, 1.0 best value to be used!!! (gilles G.)
+!  hicmin      : ice thickness corr. to max. energy stored in brine pocket
+!  hiclim      : minimum ice thickness
+!  amax        : maximum lead fraction
+!  swiqst      : energy stored in brine pocket (=1) or not (=0)	
+!  sbeta       : numerical caracteritic of the scheme for diffusion in ice
+!               Cranck-Nicholson (=0.5), implicit (=1), explicit (=0)
+!  parlat      : percentage of energy used for lateral ablation
+!  hakspl      : slope of distr. for Hakkinen-Mellor's lateral melting
+!  hibspl      : slope of distribution for Hibler's lateral melting
+!  exld        : exponent for leads-closure rate
+!  hakdif      : coefficient for diffusions of ice and snow
+!  thth         : threshold thickness for comp. of eq. thermal conductivity
+!  hnzst       : thickness of the surf. layer in temp. computation
+!  parsub      : switch for snow sublimation or not
+!  alphs       : coefficient for snow density when snow ice formation
+! 
+   hmelt       = -0.15     !  maximum melting at the bottom
+   hiccrit     = 0.3 , 0.3 !  ice thickness for lateral accretion in the Northern (Southern) Hemisphere
+   hicmin      = 0.2       !  ice thickness corr. to max. energy stored in brine pocket
+   hiclim      = 0.05      !  minimum ice thickness
+   amax        = 0.999     !  maximum lead fraction
+   swiqst      = 1.        !  energy stored in brine pocket (=1) or not (=0)	
+   sbeta       = 1.        !  numerical caracteritic of the scheme for diffusion in ice
+                           !        Cranck-Nicholson (=0.5), implicit (=1), explicit (=0)
+   parlat      = 0.0       !  percentage of energy used for lateral ablation
+   hakspl      = 0.5       !  slope of distr. for Hakkinen-Mellor's lateral melting
+   hibspl      = 0.5       !  slope of distribution for Hibler's lateral melting
+   exld        = 2.0       !  exponent for leads-closure rate
+   hakdif      = 1.0       !  coefficient for diffusions of ice and snow
+   thth        = 0.2       !  threshold thickness for comp. of eq. thermal conductivity
+   hnzst       = 0.1       !  thickness of the surf. layer in temp. computation
+   parsub      = 0.0       !  switch for snow sublimation or not
+   alphs       = 1.0       !  coefficient for snow density when snow ice formation
+/
+!-----------------------------------------------------------------------
+&namicedia     !   ice diagnostics
+!-----------------------------------------------------------------------
+   fmtinf      ='1PE13.5 ' !  format of the output values
+   nfrinf      = 4         !  number of variables written in one line
+   ntmoy       = 1         !  instantaneous values of ice evolution or averaging
+   ninfo       = 1         !  frequency of ouputs on file ice_evolu in case of averaging
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namiceout     !   parameters for outputs
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   noumef      =   19      !  number of fields
+!
+!           !         title of the field           !  name     !   units   !  save  ! multipl. ! additive !
+!           !                                      !           !           ! or not !  factor  !  factor  !
+   field_1  = 'Snow thickness                     ', 'isnowthi', 'm       ',    1   ,  1.0     ,    0.0
+   field_2  = 'Ice thickness                      ', 'iicethic', 'm       ',    1   ,  1.0     ,    0.0
+   field_3  = 'Ice produced                       ', 'iiceprod', 'm/kt    ',    1   ,  1.0     ,    0.0
+   field_4  = 'Ice concentration                  ', 'ileadfra', '%       ',    1   , -1.0     ,    1.0
+   field_5  = 'Ice temperature                    ', 'iicetemp', 'C       ',    1   ,  1.0     , -273.15
+   field_6  = 'Oceanic flux at the ice base       ', 'ioceflxb', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_7  = 'Ice velocity u                     ', 'iicevelu', 'm/s     ',    1   ,  1.0     ,    0.0
+   field_8  = 'Ice velocity v                     ', 'iicevelv', 'm/s     ',    1   ,  1.0     ,    0.0
+   field_9  = 'Sea surface temperature            ', 'isstempe', 'C       ',    1   ,  1.0     , -273.15
+   field_10 = 'Sea surface salinity               ', 'isssalin', 'PSU     ',    1   ,  1.0     ,    0.0
+   field_11 = 'Total flux at ocean surface        ', 'iocetflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_12 = 'Solar flux at ocean surface        ', 'iocesflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_13 = 'Non-solar flux at ocean surface    ', 'iocwnsfl', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_14 = 'Salt flux at ocean surface         ', 'iocesafl', 'kg/m2/kt',    1   ,  1.0     ,    0.0
+   field_15 = 'Wind stress u                      ', 'iocestru', 'Pa      ',    1   ,  1.0     ,    0.0
+   field_16 = 'Wind stress v                      ', 'iocestrv', 'Pa      ',    1   ,  1.0     ,    0.0 
+   field_17 = 'Solar flux at ice/ocean surface    ', 'iicesflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_18 = 'Non-solar flux at ice/ocean surface', 'iicenflx', 'w/m2    ',    1   ,  1.0     ,    0.0
+   field_19 = 'Snow precipitation                 ', 'isnowpre', 'kg/day  ',    1   ,  1.0     ,    0.0
+/      
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_pisces_ORCA2
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_pisces_ORCA2	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_pisces_ORCA2	(revision 1950)
@@ -0,0 +1,178 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! PISCES  :    1  - air-sea exchange                         (nampisext)
+!! namelists    2  - biological parameters                    (nampisbio)
+!!              3  - parameters for nutrient limitations      (nampislim)    
+!!              4  - parameters for phytoplankton             (nampisprod,nampismort)
+!!              5  - parameters for zooplankton               (nampismes,nampiszoo)
+!!              6  - parameters for remineralization          (nampisrem)
+!!              7  - parameters for calcite chemistry         (nampiscal)
+!!              8  - parameters for inputs deposition         (nampissed)
+!!              9  - parameters for Kriest parameterization   (nampiskrp, nampiskrs)
+!!              10 - additional 2D/3D  diagnostics            (nampisdia)
+!!              11 - Damping                                  (nampisdmp)
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisext     !   air-sea exchange
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   atcco2     = 0.28472500E+03 ! atmospheric pCO2
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisbio     !   biological parameters
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   part       =  0.85    ! part of calcite not dissolved in guts
+   nrdttrc    =  1       ! time step frequency for biology
+   wsbio      =  2.      ! POC sinking speed
+   xkmort     =  1.E-7   ! half saturation constant for mortality
+   ferat3     =  3.E-6   ! Fe/C in zooplankton 
+   wsbio2     =  50.     ! Big particles sinking speed
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampislim     !   parameters for nutrient limitations
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   conc0      =  2.e-6    ! Phosphate half saturation
+   conc1      =  10E-6    ! Phosphate half saturation for diatoms
+   conc2      =  0.02E-9  ! Iron half saturation for phyto
+   conc2m     =  0.08E-9  ! Max iron half saturation for phyto
+   conc3      =  0.1E-9   ! Iron half saturation for diatoms
+   conc3m     =  0.4E-9   ! Maxi iron half saturation for diatoms
+   concnnh4   =  1.E-7    ! NH4 half saturation for phyto
+   concdnh4   =  5.E-7    ! NH4 half saturation for diatoms
+   xksi1      =  2.E-6    ! half saturation constant for Si uptake
+   xksi2      =  3.33E-6  ! half saturation constant for Si/C
+   xkdoc      =  417.E-6  ! half-saturation constant of DOC remineralization
+   caco3r     =  0.15      ! mean rain ratio
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisprod     !   parameters for phytoplankton growth
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   pislope    =  4.       ! P-I slope  
+   pislope2   =  4.       ! P-I slope  for diatoms
+   excret     =  0.05     ! excretion ratio of phytoplankton
+   excret2    =  0.05     ! excretion ratio of diatoms
+   chlcnm     =  0.033    ! Minimum Chl/C in nanophytoplankton
+   chlcdm     =  0.05     ! Minimum Chl/C in diatoms
+   fecnm      =  10E-6    ! Maximum Fe/C in nanophytoplankton
+   fecdm      =  15E-6    ! Minimum Fe/C in diatoms
+   grosip     =  0.151    ! mean Si/C ratio
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismort     !   parameters for phytoplankton sinks
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   wchl       =  0.001    ! quadratic mortality of phytoplankton
+   wchld      =  0.02     ! maximum quadratic mortality of diatoms
+   mprat      =  0.01     ! phytoplankton mortality rate
+   mprat2     =  0.01     ! Diatoms mortality rate
+   mpratm     =  0.01     ! Phytoplankton minimum mortality rate
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampismes     !   parameters for mesozooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   grazrat2   =  0.7      ! maximal mesozoo grazing rate
+   resrat2    =  0.005    ! exsudation rate of mesozooplankton
+   mzrat2     =  0.03     ! mesozooplankton mortality rate
+   xprefc     =  1.       ! zoo preference for phyto
+   xprefp     =  0.2      ! zoo preference for POC
+   xprefz     =  1.       ! zoo preference for zoo
+   xprefpoc   =  0.2      ! zoo preference for poc
+   xkgraz2    =  20.E-6   ! half sturation constant for meso grazing
+   epsher2    =  0.33     ! Efficicency of Mesozoo growth 
+   sigma2     =  0.6      ! Fraction of mesozoo excretion as DOM
+   unass2     =  0.3      ! non assimilated fraction of P by mesozoo
+   grazflux   =  5.e3     ! flux-feeding rate
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiszoo     !   parameters for microzooplankton
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   grazrat    =  4.0      ! maximal zoo grazing rate   
+   resrat     =  0.03     ! exsudation rate of zooplankton
+   mzrat      =  0.0      ! zooplankton mortality rate
+   xpref2c    =  0.0      ! Microzoo preference for POM 
+   xpref2p    =  0.5      ! Microzoo preference for Nanophyto
+   xpref2d    =  0.5      ! Microzoo preference for Diatoms
+   xkgraz     =  20.E-6   ! half sturation constant for grazing 
+   epsher     =  0.33     ! Efficiency of microzoo growth
+   sigma1     =  0.6      ! Fraction of microzoo excretion as DOM
+   unass      =  0.3      ! non assimilated fraction of phyto by zoo
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisrem     !   parameters for remineralization
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xremik    =  0.3       ! remineralization rate of DOC
+   xremip    =  0.025     ! remineralisation rate of POC
+   nitrif    =  0.05      ! NH4 nitrification rate
+   xsirem    =  0.015     ! remineralization rate of Si
+   xlam1     =  0.005     ! scavenging rate of Iron
+   oxymin    =  1.E-6     ! Half-saturation constant for anoxia 
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiscal     !   parameters for Calcite chemistry
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   kdca       =  0.327e3  ! calcite dissolution rate constant (1/time)
+   nca        =  1.       ! order of dissolution reaction (dimensionless)
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampissed     !   parameters for inputs deposition
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_dustfer  =  .true.   ! boolean for dust input from the atmosphere
+   ln_river    =  .true.   ! boolean for river input of nutrients
+   ln_ndepo    =  .true.   ! boolean for atmospheric deposition of N
+   ln_sedinput =  .true.   ! boolean for Fe input from sediments
+   sedfeinput  =  1E-9     ! Coastal release of Iron
+   dustsolub   =  0.014    ! Solubility of the dust
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiskrp     !   Kriest parameterization : parameters     "key_kriest"
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkr_eta      = 1.17    ! Sinking  exponent
+   xkr_zeta     = 2.28    ! N content exponent
+   xkr_mass_min = 0.0002  ! Minimum mass for Aggregates
+   xkr_mass_max = 1.      ! Maximum mass for Aggregates
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampiskrs     !   Kriest parameterization : size classes  "key_kriest"
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   xkr_sfact    = 942.    ! Sinking factor
+   xkr_stick    = 0.5     ! Stickiness
+   xkr_nnano    = 2.337   ! Nbr of cell in nano size class
+   xkr_ndiat    = 3.718   ! Nbr of cell in diatoms size class
+   xkr_nmeso    = 7.147   ! Nbr of cell in mesozoo size class
+   xkr_naggr    = 9.877   ! Nbr of cell in aggregates  size class
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdia     !   additional 2D/3D tracers diagnostics ("key_trc_diaadd")
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   nwritedia   =  5475     !  time step frequency for tracers diagnostics
+!
+!              !    name   !           title of the field          !     units      !
+!              !           !                                       !                !  
+   pisdia2d(1)  = 'Cflx     ' , 'DIC flux                          ',  'molC/m2/s    '
+   pisdia2d(2)  = 'Oflx     ' , 'Oxygen flux                       ',  'molC/m2/s    '
+   pisdia2d(3)  = 'Kg       ' , 'Gas transfer                      ',  'mol/m2/s/uatm'
+   pisdia2d(4)  = 'Delc     ' , 'Delta CO2                         ',  'uatm         '
+   pisdia2d(5)  = 'PMO      ' , 'POC export                        ',  'molC/m2/s    '
+   pisdia2d(6)  = 'PMO2     ' , 'GOC export                        ',  'molC/m2/s    '
+   pisdia2d(7)  = 'ExpFe1   ' , 'Nano iron export                  ',  'molFe/m2/s   '
+   pisdia2d(8)  = 'ExpFe2   ' , 'Diatoms iron export               ',  'molFe/m2/s   '
+   pisdia2d(9)  = 'ExpSi    ' , 'Silicate export                   ',  'molSi/m2/s   '
+   pisdia2d(10) = 'ExpCaCO3 ' , 'Calcite export                    ',  'molC/m2/s    '
+   pisdia2d(11) = 'heup     ' , 'euphotic layer depth              ',  'm            '
+   pisdia2d(12) = 'Fedep    ' , 'Iron dep                          ',  'molFe/m2/s   '
+   pisdia2d(13) = 'Nfix     ' , 'Nitrogen Fixation                 ',  'molN/m2/s    '
+   pisdia3d(1)  = 'PH       ' , 'PH                                ',  '-            '
+   pisdia3d(2)  = 'CO3      ' , 'Bicarbonates                      ',  'mol/l        '
+   pisdia3d(3)  = 'CO3sat   ' , 'CO3 saturation                    ',  'mol/l        '
+   pisdia3d(4)  = 'PAR      ' , 'light penetration                 ',  'W/m2         '
+   pisdia3d(5)  = 'PPPHY    ' , 'Primary production of nanophyto   ',  'molC/m3/s    '
+   pisdia3d(6)  = 'PPPHY2   ' , 'Primary production of diatoms     ',  'molC/m3/s    '
+   pisdia3d(7)  = 'PPNEWN   ' , 'New Primary production of nano    ',  'molC/m3/s    '
+   pisdia3d(8)  = 'PPNEWD   ' , 'New Primary production of diat    ',  'molC/m3/s    '
+   pisdia3d(9)  = 'PBSi     ' , 'Primary production of Si diatoms  ',  'molSi/m3/s   '
+   pisdia3d(10) = 'PFeN     ' , 'Primary production of nano iron   ',  'molFe/m3/s   '
+   pisdia3d(11) = 'PFeD     ' , 'Primary production of diatoms iron',  'molFe/m3/s   '
+/
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&nampisdmp     !  Damping 
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ln_pisdmp    =  .true.     !  Relaxation fo some tracers to a mean value
+   ln_pisclo    =  .true.    !  Restoring of tracer to initial value on closed sea ("key_dtatrc")
+/
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_top_ORCA2
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_top_ORCA2	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/namelist_top_ORCA2	(revision 1950)
@@ -0,0 +1,143 @@
+!!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!! NEMO/TOP1 :  1 - tracer definition                     (namtoptrc)
+!! namelists    2 - dynamical tracer trends               (namtoptrd)
+!!              6 - tracer advection                      (namtopadv)
+!!              7 - tracer bottom boundary                (namtopbbl)
+!!              8 - tracer lateral diffusion              (namtopldf)
+!!              3 - tracer vertical physics               (namtopzdf)
+!!              9 - tracer newtonian damping              (namtopdmp)
+!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+!'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+&namtoptrc     !   tracers definition
+!,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+   ndttrc      =  1        !  time step frequency for passive tracers      
+   nwritetrc   =  5475     !  time step frequency for tracer outputs
+   ln_rsttr    = .false.   !  start from a restart file (T) or not (F)
+   nrsttr      =   0       !  restart control = 0 initial time step is not compared to the restart file value
+                           !                  = 1 do not use the value in the restart file
+                           !                  = 2 calendar parameters read in the restart file
+   cn_trcrst_in  = "restart_trc"   !  suffix of pass. tracer restart name (input)
+   cn_trcrst_out = "restart_trc"   !  suffix of pass. tracer restart name (output)
+!
+!              !    name   !           title of the field              !   units    ! initial data ! save   !
+!              !           !                                           !            ! from file    ! or not ! 
+!              !           !                                           !            ! or not       !        !
+   tracer(1)   = 'DIC     ' , 'Dissolved inorganic Concentration      ',  'molC/L'  ,  .true.     ,  .true.
+   tracer(2)   = 'Alkalini' , 'Total Alkalinity Concentration         ',  'eq/L '   ,  .true.     ,  .true.
+   tracer(3)   = 'O2      ' , 'Dissolved Oxygen Concentration         ',  'molO2/L' ,  .true.     ,  .true.
+   tracer(4)   = 'CaCO3   ' , 'Calcite Concentration                  ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(5)   = 'PO4     ' , 'Phosphate Concentration                ',  'molC/L'  ,  .true.     ,  .true.
+   tracer(6)   = 'POC     ' , 'Small organic carbon Concentration     ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(7)   = 'Si      ' , 'Silicate Concentration                 ',  'molSi/L' ,  .true.     ,  .true.
+   tracer(8)   = 'PHY     ' , 'Nanophytoplankton Concentration        ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(9)   = 'ZOO     ' , 'Microzooplankton Concentration         ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(10)  = 'DOC     ' , 'Dissolved organic Concentration        ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(11)  = 'PHY2    ' , 'Diatoms Concentration                  ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(12)  = 'ZOO2    ' , 'Mesozooplankton Concentration          ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(13)  = 'BSi     ' , 'Diatoms Silicate Concentration         ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(14)  = 'Fer     ' , 'Dissolved Iron Concentration           ',  'molFe/L' ,  .true.     ,  .true.
+   tracer(15)  = 'BFe     ' , 'Big iron particles Concentration       ',  'molFe/L' ,  .false.    ,  .true.
+   tracer(16)  = 'GOC     ' , 'Big organic carbon Concentration       ',  'molC/L'  ,  .false.    ,  .true.
+   tracer(17)  = 'SFe     ' , 'Small iron particles Concentration     ',  'molFe/L' ,  .false.    ,  .true.
+   tracer(18)  = 'DFe     ' , 'Diatoms iron  Concentration            ',  'molFe/L' ,  .false.    ,  .true.
+   tracer(19)  = 'DSi     ' , 'Sinking biogenic Silicate Concentration',  'molC/L'  ,  .false.    ,  .true.
+   tracer(20)  = 'NFe     ' , 'Nano iron Concentration                ',  'molFe/L' ,  .false.    ,  .true.
+   tracer(21)  = 'NCHL    ' , 'Nano chlorophyl Concentration          ',  'gChl/L'  ,  .false.    ,  .true.
+   tracer(22)  = 'DCHL    ' , 'Diatoms chlorophyl Concentration       ',  'gChl/L'  ,  .false.    ,  .true.
+   tracer(23)  = 'NO3     ' , 'Nitrates Concentration                 ',  'molC/L'  ,  .true.     ,  .true.
+   tracer(24)  = 'NH4     ' , 'Ammonium Concentration                 ',  'molC/L'  ,  .false.    ,  .true.
+/
+!-----------------------------------------------------------------------
+&namtopadv    !   advection scheme for passive tracer 
+!-----------------------------------------------------------------------
+   ln_trcadv_cen2   =  .false.  !  2nd order centered scheme   
+   ln_trcadv_tvd    =  .false.  !  TVD scheme   
+   ln_trcadv_muscl  =  .true.   !  MUSCL scheme
+   ln_trcadv_muscl2 =  .false.  !  MUSCL2 scheme + cen2 at boundaries
+   ln_trcadv_smolar =  .false.  !  SMOLAR scheme
+   rsc              =  1.       !  tuning coefficient for Smol-Car. scheme 
+   ncortrc          =  1        !  number of corrective phases for Smol-Car. scheme 
+   crosster         =  .false.  !  computes Smol-Car crossterms (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namtopbbl    !   bottom boundary layer scheme for passive tracer 
+!-----------------------------------------------------------------------
+   atrcbbl          = 1000.     !  lateral mixing coefficient in the bbl  [m2/s]
+/
+!-----------------------------------------------------------------------
+&namtopldf    !   lateral diffusion scheme for passive tracer 
+!-----------------------------------------------------------------------
+   ln_trcldf_diff   =  .true.   !  performs lateral diffusion (T) or not (F)
+!                               !  Type of the operator : 
+   ln_trcldf_lap    =  .true.   !     laplacian operator       
+   ln_trcldf_bilap  =  .false.  !     bilaplacian operator     
+                                !  Direction of action  :
+   ln_trcldf_level  =  .false.  !     iso-level                
+   ln_trcldf_hor    =  .false.  !     horizontal (geopotential)         (require "key_ldfslp" when ln_sco=T)
+   ln_trcldf_iso    =  .true.   !     iso-neutral                       (require "key_ldfslp")
+!                               !  Coefficient
+   ahtrc0      =  2000.         !     horizontal eddy diffusivity for tracers [m2/s]
+   ahtrb0      =     0.         !     background eddy diffusivity for ldf_iso [m2/s]
+   aeivtr0     =  2000.         !     eddy induced velocity coefficient [m2/s]    (require "key_trcldf_eiv")
+   trcrat      =  1.            !  ratio betweeen passive and active tracer diffusion coeff
+/
+!-----------------------------------------------------------------------
+&namtopzdf        !   vertical physics
+!-----------------------------------------------------------------------
+   ln_trczdf_exp   =  .false.  !  split explicit (T) or implicit (F) time stepping
+   n_trczdf_exp    =   3       !  number of sub-timestep for ln_trczdfexp=T
+/
+!-----------------------------------------------------------------------
+&namtoprad        !  treatment of negative concentrations 
+!-----------------------------------------------------------------------
+   ln_trcrad   =  .true.  !  artificially correct negative concentrations (T) or not (F)
+/
+!-----------------------------------------------------------------------
+&namtopdmp        !   passive tracer newtonian damping                 ('key_trcdmp')
+!-----------------------------------------------------------------------
+   ndmptr      =   20      !  type of damping in passive tracers
+                           !     ='latitude', damping poleward of 'ndmp' degrees and function 
+                           !                  of the distance-to-coast. Red and Med Seas as ndmptr=-1
+                           !     =-1 damping only in Med and Red Seas
+   ndmpftr     =    0      !  create a damping.coeff NetCDF file (=1) or not (=0)
+   nmldmptr    =    1      !  type of damping: =0 damping throughout the water column
+                           !                   =1 no damping in the mixed layer defined by avt >5cm2/s )
+                           !                   =2 no damping in the mixed layer defined rho<rho(surf)+.01 )
+   sdmptr      =   50.     !  surface time scale for internal damping (days)
+   bdmptr      =  360.     !  bottom  time scale for internal damping (days)
+   hdmptr      =  800.     !  depth of transition between sdmptr and bdmptr (meters)
+/
+!-----------------------------------------------------------------------
+&namtoptrd       !   diagnostics on tracer trends
+!                          or mixed-layer trends          ('key_trdmld_trc')
+!----------------------------------------------------------------------
+   ntrd_trc   =  5475      !  time step frequency and tracers trends
+   nctls_trc  =   0        !  control surface type in mixed-layer trends (0,1 or n<jpk)
+   ucf_trc    =   1        !  unit conversion factor (=1 -> /seconds ; =86400. -> /day)
+   ln_trdmld_trc_restart = .false.  !  restart for ML diagnostics
+   ln_trdmld_trc_instant = .true.  !  flag to diagnose trends of instantantaneous or mean ML T/S
+   luttrd(1)  =   .true.
+   luttrd(2)  =   .true.
+   luttrd(3)  =   .false.
+   luttrd(4)  =   .false.
+   luttrd(5)  =   .false.
+   luttrd(6)  =   .false.
+   luttrd(7)  =   .false.
+   luttrd(8)  =   .false.
+   luttrd(9)  =   .false.
+   luttrd(10) =   .false.
+   luttrd(11) =   .false.
+   luttrd(12) =   .false.
+   luttrd(13) =   .false.
+   luttrd(14) =   .false.
+   luttrd(15) =   .false.
+   luttrd(16) =   .false.
+   luttrd(17) =   .false.
+   luttrd(18) =   .false.
+   luttrd(19) =   .false.
+   luttrd(20) =   .false.
+   luttrd(21) =   .false.
+   luttrd(22) =   .false.
+   luttrd(23) =   .true.
+   luttrd(24) =   .false.
+/
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/offline.def
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/offline.def	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/offline.def	(revision 1950)
@@ -0,0 +1,9 @@
+T
+4
+T
+-2.
+48.1
+1
+T
+6
+2
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/orchidee.def
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/orchidee.def	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/orchidee.def	(revision 1950)
@@ -0,0 +1,887 @@
+#
+#**************************************************************************
+#                    Namelist for ORCHIDEE
+#**************************************************************************
+#
+#
+#**************************************************************************
+#          OPTIONS NOT SET
+#**************************************************************************
+#
+#
+#**************************************************************************
+#          Management of display in the run of ORCHIDEE
+#**************************************************************************
+
+# Model chatting level
+# level of online diagnostics in STOMATE (0-4)
+# With this variable, you can determine how much online information STOMATE
+#  gives during the run. 0 means virtually no info.
+BAVARD = 1
+# default = 1
+
+# Flag for debug information
+# This option allows to switch on the output of debug
+#         information without recompiling the code.
+DEBUG_INFO = n
+#default = n
+
+# ORCHIDEE will print more messages
+# This flag permits to print more debug messages in the run.
+LONGPRINT = n
+#default = n
+
+#---------------------------------------------------------------------
+
+# To reset the time coming from SECHIBA restart file
+# This option allows the model to override the time
+#  found in the restart file of SECHIBA with the time
+#  of the first call. That is the restart time of the GCM.
+SECHIBA_reset_time = y
+# default = n
+
+#**************************************************************************
+#          Files : incoming / forcing / restart /output
+#**************************************************************************
+# Ancillary files :
+#---------------------------------------------------------------------
+
+# Name of file from which the vegetation map is to be read
+# If !IMPOSE_VEG
+# If LAND_USE 
+#   default = pft_new.nc
+#   The name of the file to be opened to read a vegetation
+#   map (in pft) is to be given here. 
+# If !LAND_USE
+#   default = ../surfmap/carteveg5km.nc
+#   The name of the file to be opened to read the vegetation
+#   map is to be given here. Usualy SECHIBA runs with a 5kmx5km
+#   map which is derived from the IGBP one. We assume that we have
+#   a classification in 87 types. This is Olson modified by Viovy.
+VEGETATION_FILE = PFTmap.nc
+
+
+# Name of file from which the bare soil albedo
+# If !IMPOSE_AZE
+# The name of the file to be opened to read the soil types from 
+#  which we derive then the bare soil albedos. This file is 1x1 
+#  deg and based on the soil colors defined by Wilson and Henderson-Seller.
+SOILALB_FILE = soils_param.nc
+# default = ../surfmap/soils_param.nc
+
+# Name of file from which soil types are read
+# If !IMPOSE_VEG
+# The name of the file to be opened to read the soil types. 
+#  The data from this file is then interpolated to the grid of
+#  of the model. The aim is to get fractions for sand loam and
+#  clay in each grid box. This information is used for soil hydrology
+#  and respiration.
+SOILTYPE_FILE = soils_param.nc
+# default = ../surfmap/soils_param.nc
+
+# Name of file from which the reference
+# The name of the file to be opened to read
+#  temperature is read
+#  the reference surface temperature.
+#  The data from this file is then interpolated
+#  to the grid of the model.
+#  The aim is to get a reference temperature either
+#  to initialize the corresponding prognostic model
+#  variable correctly (ok_dgvm = TRUE) or to impose it
+#  as boundary condition (ok_dgvm = FALSE)
+REFTEMP_FILE = reftemp.nc
+# default = reftemp.nc
+
+# Input and output restart file for SECHIBA :
+#---------------------------------------------------------------------
+
+# Name of restart to READ for initial conditions
+# This is the name of the file which will be opened
+#  to extract the initial values of all prognostic
+#  values of the model. This has to be a netCDF file.
+#  Not truly COADS compliant. NONE will mean that
+#  no restart file is to be expected.
+SECHIBA_restart_in = NONE
+# default = NONE
+
+# Name of restart files to be created by SECHIBA
+# This variable give the name for the restart files. 
+#  The restart software within IOIPSL will add .nc if needed.
+SECHIBA_rest_out = sechiba_rest_out.nc
+# default = sechiba_rest_out.nc
+
+# Input and output restart file for STOMATE :
+#---------------------------------------------------------------------
+
+# Name of restart to READ for initial conditions of STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened of STOMATE
+#   to extract the initial values of all prognostic values of STOMATE.
+STOMATE_RESTART_FILEIN = NONE
+# default = NONE
+
+# Name of restart files to be created by STOMATE
+# If STOMATE_OK_STOMATE || STOMATE_WATCHOUT
+# This is the name of the file which will be opened
+#        to write the final values of all prognostic values
+#        of STOMATE.
+STOMATE_RESTART_FILEOUT = stomate_rest_out.nc
+# default = stomate_restart.nc
+
+# Forcing files for TESTSTOMATE and FORCESOIL
+#---------------------------------------------------------------------
+
+# Name of STOMATE's forcing file
+# Name that will be given to STOMATE's offline forcing file
+#STOMATE_FORCING_NAME = stomate_forcing.nc
+#default = NONE
+
+# Size of STOMATE forcing data in memory (MB)
+# This variable determines how many
+#  forcing states will be kept in memory.
+#  Must be a compromise between memory
+#  use and frequeny of disk access.
+STOMATE_FORCING_MEMSIZE = 50
+# default = 50
+
+# Name of STOMATE's carbon forcing file
+# Name that will be given to STOMATE's carbon offline forcing file
+#STOMATE_CFORCING_NAME = stomate_Cforcing.nc
+# default = NONE
+
+
+# Produced forcing file name (SECHIBA puis STOMATE) :
+#---------------------------------------------------------------------
+
+# ORCHIDEE will write out its forcing to a file
+# This flag allows to write to a file all the variables
+#  which are used to force the land-surface. The file 
+#  has exactly the same format than a normal off-line forcing
+#  and thus this forcing can be used for forcing ORCHIDEE.
+#ORCHIDEE_WATCHOUT = y
+# default = n
+
+# Filenane for the ORCHIDEE forcing file
+# If ORCHIDEE_WATCHOUT
+# This is the name of the file in which the
+#  forcing used here will be written for later use. 
+WATCHOUT_FILE = orchidee_watchout.nc
+# default = orchidee_watchout.nc
+
+# ORCHIDEE will write out with this frequency
+# If ORCHIDEE_WATCHOUT
+# This flag indicates the frequency of the write of the variables. 
+DT_WATCHOUT = 1800
+# default = dt
+
+# STOMATE does minimum service
+# set to TRUE if you want STOMATE to read
+#  and write its start files and keep track
+#  of longer-term biometeorological variables.
+#  This is useful if OK_STOMATE is not set,
+#  but if you intend to activate STOMATE later.
+#  In that case, this run can serve as a 
+#  spinup for longer-term biometeorological
+#  variables.
+#STOMATE_WATCHOUT = y
+# default = n
+
+# Output file name (SECHIBA and STOMATE) :
+#---------------------------------------------------------------------
+# Name of file in which the output is going
+# This file is going to be created by the model
+#  to be written
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+OUTPUT_FILE = sechiba_history.nc
+# default = cabauw_out.nc
+
+# Flag to switch on histfile 2 for SECHIBA (hi-frequency ?)
+# This Flag switch on the second SECHIBA writing for hi (or low) 
+#  frequency writing. This second output is optional and not written
+#  by default.
+SECHIBA_HISTFILE2 = FALSE
+# default  = FALSE
+
+# Name of file in which the output number 2 is going
+#   to be written
+# If SECHIBA_HISTFILE2
+# This file is going to be created by the model
+#   and will contain the output 2 from the model.
+SECHIBA_OUTPUT_FILE2 = sechiba_out_2.nc
+# default  = sechiba_out_2.nc
+
+# Name of file in which STOMATE's output is going to be written
+# This file is going to be created by the model
+#  and will contain the output from the model.
+#  This file is a truly COADS compliant netCDF file.
+#  It will be generated by the hist software from
+#  the IOIPSL package.
+STOMATE_OUTPUT_FILE = stomate_history.nc
+# default = stomate_history.nc
+
+# Write levels for outputs files (number of variables) :
+#---------------------------------------------------------------------
+
+# SECHIBA history output level (0..10)
+# Chooses the list of variables in the history file. 
+#  Values between 0: nothing is written; 10: everything is 
+#  written are available More details can be found on the web under documentation.
+#  web under documentation.
+SECHIBA_HISTLEVEL = 5
+# default = 5
+
+# SECHIBA history 2 output level (0..10)
+# If SECHIBA_HISTFILE2
+# Chooses the list of variables in the history file. 
+#   Values between 0: nothing is written; 10: everything is 
+#   written are available More details can be found on the web under documentation.
+#   web under documentation.
+# First level contains all ORCHIDEE outputs.
+SECHIBA_HISTLEVEL2 = 1
+# default = 1
+
+# STOMATE history output level (0..10)
+#  0: nothing is written; 10: everything is written
+STOMATE_HISTLEVEL = 10
+# default = 10
+
+#--------------------------------------------------------------------
+# STOMATE_IPCC_OUTPUT_FILE
+# This file is going to be created by the model
+#    and will contain the output from the model.
+#    This file is a truly COADS compliant netCDF file.
+#    It will be generated by the hist software from
+#    the IOIPSL package.
+# Name of file in which STOMATE's output is going
+# to be written
+STOMATE_IPCC_OUTPUT_FILE = stomate_ipcc_history.nc
+# default = stomate_ipcc_history.nc
+
+# STOMATE_IPCC_HIST_DT
+# Time step of the STOMATE IPCC history file
+# STOMATE IPCC history time step (d)
+STOMATE_IPCC_HIST_DT = -1
+# default = 0.
+
+# Write frequency for output files (SECHIBA in seconds et
+# STOMATE in days) :
+#---------------------------------------------------------------------
+# Frequency in seconds at which to WRITE output
+# This variables gives the frequency the output of
+#  the model should be written into the netCDF file.
+#  It does not affect the frequency at which the
+#  operations such as averaging are done.
+WRITE_STEP = 86400.0
+# default = 86400.0
+
+# Frequency in seconds at which to WRITE output
+# If SECHIBA_HISTFILE2
+# This variables gives the frequency the output 2 of
+#   the model should be written into the netCDF file.
+#   It does not affect the frequency at which the
+#   operations such as averaging are done.
+#   That is IF the coding of the calls to histdef
+#   are correct !
+WRITE_STEP2 = 1800.0
+# default = 1800.0
+
+# STOMATE history time step (d)
+# Time step of the STOMATE history file
+# Care : this variable must be higher than DT_SLOW
+STOMATE_HIST_DT = 10.
+# default = 10.
+
+#---------------------------------------------------------------------
+# FORCESOIL CARBON spin up parametrization
+#---------------------------------------------------------------------
+
+# Number of time steps per year for carbon spinup.
+FORCESOIL_STEP_PER_YEAR = 12
+# default = 12
+
+# Number of years saved for carbon spinup.
+FORCESOIL_NB_YEAR = 1
+# default = 1
+
+#---------------------------------------------------------------------
+# Parametrization :
+#---------------------------------------------------------------------
+
+# Activate STOMATE?
+# set to TRUE if STOMATE is to be activated
+STOMATE_OK_STOMATE = n
+# default = n
+
+# Activate DGVM?
+# set to TRUE if Dynamic Vegetation DGVM is to be activated
+STOMATE_OK_DGVM = n
+# default = n
+
+# Activate CO2?
+# set to TRUE if photosynthesis is to be activated
+STOMATE_OK_CO2 = y
+# default = n
+
+# Flag to force the value of atmospheric CO2 for vegetation.
+# If this flag is set to true, the ATM_CO2 parameter is used
+#  to prescribe the atmospheric CO2.
+# This Flag is only use in couple mode.
+FORCE_CO2_VEG = FALSE
+# default = FALSE
+
+# Value for atm CO2.
+# If FORCE_CO2_VEG (in not forced mode)
+# Value to prescribe the atm CO2.
+#  For pre-industrial simulations, the value is 286.2 .
+#  348. for 1990 year.
+ATM_CO2 = 350.
+# default = 350.
+
+# constant tree mortality
+# If yes, then a constant mortality is applied to trees. 
+#  Otherwise, mortality is a function of the trees' 
+#  vigour (as in LPJ).
+LPJ_GAP_CONST_MORT = y
+# default = y
+
+# no fire allowed
+# With this variable, you can allow or not
+#  the estimation of CO2 lost by fire
+FIRE_DISABLE = n
+# default = n
+
+# Average method for z0
+# If this flag is set to true (y) then the neutral Cdrag
+#  is averaged instead of the log(z0). This should be
+#  the prefered option. We still wish to keep the other
+#  option so we can come back if needed. If this is
+#  desired then one should set Z0CDRAG_AVE = n
+Z0CDRAG_AVE = y
+# default = y
+
+# parameters describing the surface (vegetation + soil) :
+#---------------------------------------------------------------------
+#
+# Should the vegetation be prescribed
+# This flag allows the user to impose a vegetation distribution
+#  and its characterisitcs. It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_VEG = n
+# default = n
+
+# Flag to use old "interpolation" of vegetation map.
+# IF NOT IMPOSE_VEG and NOT LAND_USE
+#  If you want to recover the old (ie orchidee_1_2 branch) 
+#   "interpolation" of vegetation map.
+SLOWPROC_VEGET_OLD_INTERPOL = n
+# default = n
+
+# Vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEG__01 = 0.2
+SECHIBA_VEG__02 = 0.0
+SECHIBA_VEG__03 = 0.0
+SECHIBA_VEG__04 = 0.0
+SECHIBA_VEG__05 = 0.0
+SECHIBA_VEG__06 = 0.0
+SECHIBA_VEG__07 = 0.0
+SECHIBA_VEG__08 = 0.0
+SECHIBA_VEG__09 = 0.0
+SECHIBA_VEG__10 = 0.8
+SECHIBA_VEG__11 = 0.0
+SECHIBA_VEG__12 = 0.0
+SECHIBA_VEG__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+
+# Maximum vegetation distribution within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of vegetation is read from the restart file. If
+#  it is not found there we will use the values provided here.
+SECHIBA_VEGMAX__01 = 0.2
+SECHIBA_VEGMAX__02 = 0.0
+SECHIBA_VEGMAX__03 = 0.0
+SECHIBA_VEGMAX__04 = 0.0
+SECHIBA_VEGMAX__05 = 0.0
+SECHIBA_VEGMAX__06 = 0.0
+SECHIBA_VEGMAX__07 = 0.0
+SECHIBA_VEGMAX__08 = 0.0
+SECHIBA_VEGMAX__09 = 0.0
+SECHIBA_VEGMAX__10 = 0.8
+SECHIBA_VEGMAX__11 = 0.0
+SECHIBA_VEGMAX__12 = 0.0
+SECHIBA_VEGMAX__13 = 0.0
+# default = 0.2, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.8, 0.0, 0.0, 0.0
+
+# LAI for all vegetation types (0-dim mode)
+# If IMPOSE_VEG
+# The maximum LAI used in the 0dim mode. The values should be found
+#  in the restart file. The new values of LAI will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SECHIBA_LAI__01 = 0.
+SECHIBA_LAI__02 = 8.
+SECHIBA_LAI__03 = 8.
+SECHIBA_LAI__04 = 4.
+SECHIBA_LAI__05 = 4.5
+SECHIBA_LAI__06 = 4.5
+SECHIBA_LAI__07 = 4.
+SECHIBA_LAI__08 = 4.5
+SECHIBA_LAI__09 = 4.
+SECHIBA_LAI__10 = 2.
+SECHIBA_LAI__11 = 2.
+SECHIBA_LAI__12 = 2.
+SECHIBA_LAI__13 = 2.
+# default = 0., 8., 8., 4., 4.5, 4.5, 4., 4.5, 4., 2., 2., 2., 2.
+
+# Height for all vegetation types (m)
+# If IMPOSE_VEG
+# The height used in the 0dim mode. The values should be found
+#  in the restart file. The new values of height will be computed anyway
+#  at the end of the current day. The need for this variable is caused
+#  by the fact that the model may stop during a day and thus we have not
+#  yet been through the routines which compute the new surface conditions.
+SLOWPROC_HEIGHT__01 = 0.
+SLOWPROC_HEIGHT__02 = 50.
+SLOWPROC_HEIGHT__03 = 50.
+SLOWPROC_HEIGHT__04 = 30.
+SLOWPROC_HEIGHT__05 = 30.
+SLOWPROC_HEIGHT__06 = 30.
+SLOWPROC_HEIGHT__07 = 20.
+SLOWPROC_HEIGHT__08 = 20.
+SLOWPROC_HEIGHT__09 = 20.
+SLOWPROC_HEIGHT__10 = .2
+SLOWPROC_HEIGHT__11 = .2
+SLOWPROC_HEIGHT__12 = .4
+SLOWPROC_HEIGHT__13 = .4
+# default = 0., 30., 30., 20., 20., 20., 15., 15., 15., .5, .6, 1.0, 1.0
+
+
+# Fraction of the 3 soil types (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction for the 3 soil types
+#  in the mesh in the following order : sand loam and clay.
+SOIL_FRACTIONS__01 = 0.28
+SOIL_FRACTIONS__02 = 0.52
+SOIL_FRACTIONS__03 = 0.20
+# default = 0.28, 0.52, 0.20
+
+# Fraction of other surface types within the mesh (0-dim mode)
+# If IMPOSE_VEG
+# The fraction of ice, lakes, etc. is read from the restart file. If
+#  it is not found there we will use the values provided here.
+#  For the moment, there is only ice.
+SECHIBA_FRAC_NOBIO = 0.0
+# default = 0.0
+
+# Fraction of the clay fraction (0-dim mode)
+# If IMPOSE_VEG
+# Determines the fraction of clay in the grid box.
+CLAY_FRACTION = 0.2
+# default = 0.2
+
+# Should the surface parameters be prescribed
+# This flag allows the user to impose the surface parameters
+#  (Albedo Roughness and Emissivity). It is espacially interesting for 0D
+#  simulations. On the globe it does not make too much sense as
+#  it imposes the same vegetation everywhere
+IMPOSE_AZE = n
+# default = n
+
+# Emissivity of the surface for LW radiation
+# If IMPOSE_AZE
+# The surface emissivity used for compution the LE emission
+#  of the surface in a 0-dim version. Values range between 
+#  0.97 and 1.. The GCM uses 0.98.
+CONDVEG_EMIS = 1.0
+# default = 1.0
+
+# SW visible albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in visible wavelengths to be used 
+#  on the point if a 0-dim version of SECHIBA is used. 
+#  Look at the description of the forcing data for 
+#  the correct value.
+CONDVEG_ALBVIS = 0.25
+# default = 0.25
+
+# SW near infrared albedo for the surface
+# If IMPOSE_AZE
+# Surface albedo in near infrared wavelengths to be used 
+#  on the point if a 0-dim version of SECHIBA is used. 
+#  Look at the description of the forcing data for 
+#  the correct value.
+CONDVEG_ALBNIR = 0.25
+# default = 0.25
+
+# Surface roughness (m)
+# If IMPOSE_AZE
+# Surface rougness to be used on the point if a 0-dim version
+#  of SECHIBA is used. Look at the description of the forcing  
+#  data for the correct value.
+CONDVEG_Z0 = 0.15
+# default = 0.15_stnd
+
+# Height to be added to the height of the first level (m)
+# If IMPOSE_AZE
+# ORCHIDEE assumes that the atmospheric level height is counted
+#  from the zero wind level. Thus to take into account the roughness
+#  of tall vegetation we need to correct this by a certain fraction
+#  of the vegetation height. This is called the roughness height in
+#  ORCHIDEE talk.
+ROUGHHEIGHT = 0.0
+# default = 0.0
+
+# The snow albedo used by SECHIBA
+# This option allows the user to impose a snow albedo.
+#  Default behaviour is to use the model of snow albedo
+#  developed by Chalita (1993).
+CONDVEG_SNOWA = default
+# default = use the model of snow albedo developed by Chalita
+
+# Switch bare soil albedo dependent (if TRUE) on soil wetness
+# If TRUE, the model for bare soil albedo is the old formulation.
+#  Then it depend on the soil dry or wetness. If FALSE, it is the 
+#  new computation that is taken, it is only function of soil color.
+ALB_BARE_MODEL = FALSE
+# default = FALSE
+
+# Initial snow mass if not found in restart
+# The initial value of snow mass if its value is not found
+#   in the restart file. This should only be used if the model is 
+#   started without a restart file.
+HYDROL_SNOW = 0.0
+# default = 0.0
+
+
+# Initial snow age if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOWAGE = 0.0
+# default = 0.0
+
+# Initial snow amount on ice, lakes, etc. if not found in restart
+# The initial value of snow if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOW_NOBIO = 0.0
+# default = 0.0
+
+# Initial snow age on ice, lakes, etc. if not found in restart
+# The initial value of snow age if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_SNOW_NOBIO_AGE = 0.0
+# default = 0.0
+
+# Initial soil moisture stress if not found in restart
+# The initial value of soil moisture stress if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_HUMR = 1.0
+# default = 1.0
+
+# Total depth of soil reservoir
+HYDROL_SOIL_DEPTH = 4.
+# default = 2.
+
+# Root profile
+# Default values were defined for 2 meters soil depth.
+# For 4 meters soil depth, you may use those ones :
+# 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+HYDROL_HUMCSTE = 5., .4, .4, 1., .8, .8, 1., 1., .8, 4., 1., 4., 1.
+# default =  5., .8, .8, 1., .8, .8, 1., 1., .8, 4., 4., 4., 4.
+
+# Initial restart deep soil moisture if not found in restart
+# The initial value of deep soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file. Default behaviour is a saturated soil.
+HYDROL_BQSB = default
+# default = Maximum quantity of water (Kg/M3) * Total depth of soil reservoir = 150. * 2
+
+# Initial upper soil moisture if not found in restart
+# The initial value of upper soil moisture if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_GQSB = 0.0
+# default = 0.0
+
+# Initial upper reservoir depth if not found in restart
+# The initial value of upper reservoir depth if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_DSG = 0.0
+# default = 0.0
+
+# Initial dry soil above upper reservoir if not found in restart
+# The initial value of dry soil above upper reservoir if its value 
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file. The default behaviour
+#  is to compute it from the variables above. Should be OK most of 
+#  the time.
+HYDROL_DSP = default
+# default = Total depth of soil reservoir - HYDROL_BQSB / Maximum quantity of water (Kg/M3) = 0.0
+
+# Initial water on canopy if not found in restart
+# The initial value of moisture on canopy if its value 
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_QSV = 0.0
+# default = 0.0
+
+# Soil moisture on each soil tile and levels
+# The initial value of mc if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+HYDROL_MOISTURE_CONTENT = 0.3
+# default = 0.3
+
+# US_NVM_NSTM_NSLM
+# The initial value of us (relative moisture) if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+US_INIT = 0.0
+# default = 0.0
+
+# Coefficient for free drainage at bottom
+# The initial value of free drainage if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+FREE_DRAIN_COEF = 1.0, 1.0, 1.0
+# default = 1.0, 1.0, 1.0
+
+# Bare soil evap on each soil if not found in restart
+# The initial value of bare soils evap if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+EVAPNU_SOIL = 0.0
+# default = 0.0
+
+# Initial temperature if not found in restart
+# The initial value of surface temperature if its value is not found
+#  in the restart file. This should only be used if the model is 
+#  started without a restart file.
+ENERBIL_TSURF = 280.
+# default = 280.
+
+# Initial Soil Potential Evaporation
+# The initial value of soil potential evaporation if its value 
+#  is not found in the restart file. This should only be used if
+#  the model is started without a restart file. 
+ENERBIL_EVAPOT = 0.0
+# default = 0.0
+
+# Initial soil temperature profile if not found in restart
+# The initial value of the temperature profile in the soil if 
+#   its value is not found in the restart file. This should only 
+#   be used if the model is started without a restart file. Here
+#   we only require one value as we will assume a constant 
+#   throughout the column.
+THERMOSOIL_TPRO = 280.
+# default = 280.
+
+# Initial leaf CO2 level if not found in restart
+# The initial value of leaf_ci if its value is not found
+#  in the restart file. This should only be used if the model is
+#  started without a restart file.
+DIFFUCO_LEAFCI = 233.
+# default = 233.
+
+
+# Keep cdrag coefficient from gcm.
+# Set to .TRUE. if you want q_cdrag coming from GCM.
+#  Keep cdrag coefficient from gcm for latent and sensible heat fluxes.
+#  TRUE if q_cdrag on initialization is non zero (FALSE for off-line runs).
+CDRAG_FROM_GCM = y
+# default =  IF q_cdrag == 0 ldq_cdrag_from_gcm = .FALSE. ELSE .TRUE.
+
+
+# Artificial parameter to increase or decrease canopy resistance
+# Add from Nathalie - the 28 of March 2006 - advice from Fred Hourdin
+# By PFT.
+RVEG_PFT = 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1., 1.
+# default = 1.
+
+
+# Interception reservoir coefficient.
+# Transforms leaf area index into size of interception reservoir
+#  for slowproc_derivvar or stomate.
+SECHIBA_QSINT = 0.02
+# default = 0.1
+
+#**************************************************************************
+# LAND_USE
+#**************************************************************************
+
+# Read a land_use vegetation map
+# pft values are needed, max time axis is 293
+LAND_USE = y
+# default = n
+
+# Year of the land_use vegetation map readed
+# year off the pft map
+# If LAND_USE (11 = 1860 - 1850 +1 for PFTmap.20C3M.nc, 1 for PFTmap_IPCC_2000.nc) 
+VEGET_YEAR = 1
+# default = 282
+
+# booleen to indicate that a new LAND USE file will be used (since 1.9.5 version).
+# The parameter is used to bypass veget_year count 
+# and reinitialize it with VEGET_YEAR parameter.
+# Then it is possible to change LAND USE file.
+# If LAND_USE
+VEGET_REINIT = n
+# default = n
+
+# Update vegetation frequency (since 2.0 version)
+# The veget datas will be update each this time step.
+# If LAND_USE
+VEGET_UPDATE = 0Y
+# default = 1Y
+
+# treat land use modifications
+# With this variable, you can use a Land Use map
+# to simulate anthropic modifications such as   
+# deforestation.                                
+# If LAND_USE
+LAND_COVER_CHANGE = n
+# default = y
+
+#**************************************************************************
+
+# agriculture allowed?
+# With this variable, you can determine
+#  whether agriculture is allowed
+AGRICULTURE = y
+# default = y
+
+# Harvert model for agricol PFTs.
+# Compute harvest above ground biomass for agriculture.
+# Change daily turnover.
+HARVEST_AGRI = y
+# default = y
+
+# herbivores allowed?
+# With this variable, you can activate herbivores 
+HERBIVORES = n
+# default = n
+
+# treat expansion of PFTs across a grid cell?
+# With this variable, you can determine
+#  whether we treat expansion of PFTs across a
+#  grid cell.
+TREAT_EXPANSION = n
+# default = n
+
+#**************************************************************************
+
+# Time within the day simulated
+# This is the time spent simulating the current day. This variable is
+#  prognostic as it will trigger all the computations which are
+#  only done once a day.
+SECHIBA_DAY = 0.0
+# default = 0.0
+
+# Time step of STOMATE and other slow processes
+# Time step (s) of regular update of vegetation
+#  cover, LAI etc. This is also the time step
+#  of STOMATE.
+DT_SLOW = 86400.
+# default = un_jour = 86400.
+
+#**************************************************************************
+
+# Allows to switch on the multilayer hydrology of CWRR
+# This flag allows the user to decide if the vertical
+#  hydrology should be treated using the multi-layer 
+#  diffusion scheme adapted from CWRR by Patricia de Rosnay.
+#  by default the Choisnel hydrology is used.
+HYDROL_CWRR = n
+# default = n
+
+# do horizontal diffusion?
+# If TRUE, then water can diffuse horizontally between
+#  the PFTs' water reservoirs.
+HYDROL_OK_HDIFF = n
+# default = n
+ 
+
+# time scale (s) for horizontal diffusion of water
+# If HYDROL_OK_HDIFF
+# Defines how fast diffusion occurs horizontally between
+#  the individual PFTs' water reservoirs. If infinite, no
+#  diffusion.
+HYDROL_TAU_HDIFF = 1800.
+# default = 86400.
+
+# Percent by PFT of precip that is not intercepted by the canopy (since TAG 1.8).
+# During one rainfall event, PERCENT_THROUGHFALL_PFT% of the incident rainfall
+#  will get directly to the ground without being intercepted, for each PFT..
+PERCENT_THROUGHFALL_PFT = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+# default = 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30., 30.
+
+# Decides if we route the water or not
+# This flag allows the user to decide if the runoff
+#  and drainage should be routed to the ocean
+#  and to downstream grid boxes.
+RIVER_ROUTING = y
+# default = n
+
+# Name of file which contains the routing information
+# The file provided here should allow the routing module to
+#  read the high resolution grid of basins and the flow direction 
+#  from one mesh to the other.
+ROUTING_FILE = routing.nc
+# default = routing.nc
+
+# Time step of the routing scheme
+# If RIVER_ROUTING
+# This values gives the time step in seconds of the routing scheme. 
+#   It should be multiple of the main time step of ORCHIDEE. One day
+#   is a good value.
+ROUTING_TIMESTEP = 86400
+# default = 86400
+
+# Number of rivers 
+# If RIVER_ROUTING
+# This parameter chooses the number of largest river basins
+#  which should be treated as independently as rivers and not
+#  flow into the oceans as diffusion coastal flow.
+ROUTING_RIVERS = 50
+# default = 50
+
+# Should we compute an irrigation flux 
+# This parameters allows the user to ask the model
+#  to compute an irigation flux. This performed for the
+#  on very simple hypothesis. The idea is to have a good
+#  map of irrigated areas and a simple function which estimates
+#  the need to irrigate.
+DO_IRRIGATION = n
+# default = n
+
+# Name of file which contains the map of irrigated areas
+# If IRRIGATE
+# The name of the file to be opened to read the field
+#  with the area in m^2 of the area irrigated within each
+#  0.5 0.5 deg grid box. The map currently used is the one
+#  developed by the Center for Environmental Systems Research 
+#  in Kassel (1995).
+IRRIGATION_FILE = irrigated.nc
+# default = irrigated.nc
+
+# Should we include floodplains 
+# This parameters allows the user to ask the model
+#  to take into account the flood plains and return 
+#  the water into the soil moisture. It then can go 
+#  back to the atmopshere. This tried to simulate 
+#  internal deltas of rivers.
+DO_FLOODPLAINS = n
+# default = n
+
+#**************************************************************************
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/physiq.def_L19
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/physiq.def_L19	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/physiq.def_L19	(revision 1950)
@@ -0,0 +1,219 @@
+## $Id$
+#
+# PARAMETRES ANCIENNEMENT DANS gcm.def
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=n
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=12
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+##  Facteur additif pour l'albedo
+pmagic=0.008
+#
+#
+#
+# Parametres fichiers de sortie
+#
+### type_run = type run par rapport aux fichiers et variables de sortie
+# - type_run = CLIM/ENSP (=1)
+# - type_run = AMIP/CFMI (=2)
+type_run=CLIM
+### OK_journe= y sortir fichier journalier histday.nc, =n pas de fichier histday.nc
+OK_journe=n
+### OK_mensuel= y sortir fichier mensuel histmth.nc, =n pas de fichier histmth.nc
+OK_mensuel=y
+### OK_instan=y, ecrire sorties "instantannees" (chaque pas de temps de la  physique)
+OK_instan=n
+### OK_hf=y, ecrire sorties hautes frequence histhf.nc, =n pas de fichier histhf.nc
+ok_hf=n
+#
+# Parametres niveau de sorties differents fichiers 
+#
+### lev_histhf=0-4, niveau de sortie fichier "histhf.nc" 
+# - lev_histhf=0 => pas de sorties histhf.nc
+# - lev_histhf=2 => defaut
+# - lev_histhf=3 => variables sur niveaux standards
+# - lev_histhf=4 => histhf3d.nc champs 3d niveaux modele => fichier. histhf3d.nc
+lev_histhf=2
+### lev_histday=0-5, niveau de sortie fichier "histday.nc"
+# - lev_histday=0 => pas de sorties lev_histday.nc
+# - lev_histday=2 => defaut
+# - lev_histday=3 => + champs 3D => F. Lott
+# - lev_histday=4 => + champs sous-surfaces
+# - lev_histday=5 => + champs F. Aires
+lev_histday=2
+### lev_histmth=0-4, niveau de sortie fichier "histmth.nc"
+# - lev_histmth=0 => pas de sorties lev_histmth.nc
+# - lev_histmth=2 => defaut
+# - lev_histmth=3 => albedo, rugosite sous-surfaces
+# - lev_histmth=4 => champs tendances 3d
+lev_histmth=5
+### ecrit_hf = frequence ecriture fichier histhf.nc en jours
+ecrit_hf=0.250
+### ecrit_day = frequence ecriture fichier histday.nc en jours
+ecrit_day=1.
+### ecrit_mth = frequence ecriture fichier histmth.nc en jours
+ecrit_mth=_ecrit-mth_
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP=_ecrit-ISCCP_
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .99
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp) 
+cld_lc_lsc = 2.6e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp) 
+cld_lc_con = 2.6e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 3600.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 3600.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 1.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 1.
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = 1361.
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = 367.
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = 1760.
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = 316.
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = 741.2
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = 535.
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=y
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=y
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=actuel
+###  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only =5 => dust only =6 => all aerosol
+flag_aerosol=1
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=0
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp=n
+## freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/physiq.def_L39
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/physiq.def_L39	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/physiq.def_L39	(revision 1950)
@@ -0,0 +1,242 @@
+## $Id$
+#
+# PARAMETRES ANCIENNEMENT DANS gcm.def
+##  Cycle diurne  ou non                 
+cycle_diurne=y
+##  Soil Model  ou non               
+soil_model=y
+##  Choix ou non  de  New oliq               
+new_oliq=y
+##  Activation ou non de la parametrisation de Hines pour la strato
+ok_hines=y
+##  Orodr  ou  non   pour l orographie              
+ok_orodr=y
+##  Orolf  ou  non   pour l orographie              
+ok_orolf=y
+##   Si = .T. ,  lecture du fichier limit avec la bonne annee             
+ok_limitvrai=n
+## Nombre  d'appels des routines de rayonnements ( par jour)                 
+nbapp_rad=24
+##  Flag  pour la convection : 1 pour LMD, 2 pour Tiedtke, 3 KE(nvlle version JYG), 30 KE(version IPCC AR4), 4 KE vect
+iflag_con=30
+## Facteur multiplication des precip convectives dans KE
+cvl_corr=1.0
+##  Facteur additif pour l'albedo
+pmagic=0.0
+#
+#
+#
+# Parametres fichiers de sortie
+#
+### type_run = type run par rapport aux fichiers et variables de sortie
+# - type_run = CLIM/ENSP (=1)
+# - type_run = AMIP/CFMI (=2)
+type_run=CLIM
+### OK_journe= y sortir fichier journalier histday.nc, =n pas de fichier histday.nc
+OK_journe=n
+### OK_mensuel= y sortir fichier mensuel histmth.nc, =n pas de fichier histmth.nc
+OK_mensuel=y
+### OK_instan=y, ecrire sorties "instantannees" (chaque pas de temps de la  physique)
+OK_instan=n
+### OK_hf=y, ecrire sorties hautes frequence histhf.nc, =n pas de fichier histhf.nc
+ok_hf=n
+#
+# more variables for level 5 : vitw and pres
+# Vertical wind
+flag_vitw         =  2, 3, 7, 6, 6
+name_vitw         =  vitw
+# Air pressure
+flag_pres         =  2, 3, 7, 6, 6
+name_pres         =  pres
+# Parametres niveau de sorties differents fichiers 
+#
+### lev_histhf=0-4, niveau de sortie fichier "histhf.nc" 
+# - lev_histhf=0 => pas de sorties histhf.nc
+# - lev_histhf=2 => defaut
+# - lev_histhf=3 => variables sur niveaux standards
+# - lev_histhf=4 => histhf3d.nc champs 3d niveaux modele => fichier. histhf3d.nc
+lev_histhf=2
+### lev_histday=0-5, niveau de sortie fichier "histday.nc"
+# - lev_histday=0 => pas de sorties lev_histday.nc
+# - lev_histday=2 => defaut
+# - lev_histday=3 => + champs 3D => F. Lott
+# - lev_histday=4 => + champs sous-surfaces
+# - lev_histday=5 => + champs F. Aires
+lev_histday=2
+### lev_histmth=0-4, niveau de sortie fichier "histmth.nc"
+# - lev_histmth=0 => pas de sorties lev_histmth.nc
+# - lev_histmth=2 => defaut
+# - lev_histmth=3 => albedo, rugosite sous-surfaces
+# - lev_histmth=4 => champs tendances 3d
+lev_histmth=5
+### Aga sortie avec niveau 2
+flag_Aga       =  2, 10, 10, 10, 10
+### parametres pour hist*NMC.nc
+#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
+#                histdayNMC: 8 ou 17
+lev_histdayNMC=8
+### - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
+ok_histNMC = y, n, n
+### ecrit_ins = frequence ecriture fichier histhf3h.nc en jours
+ecrit_ins=0.125
+### ecrit_hf = frequence ecriture fichier histhf.nc en jours
+ecrit_hf=0.250
+### ecrit_day = frequence ecriture fichier histday.nc en jours
+ecrit_day=1.
+### ecrit_mth = frequence ecriture fichier histmth.nc en jours
+ecrit_mth=_ecrit-mth_
+### freqin_isccp = frequence input en secondes du simulateur ISCCP
+freq_ISCCP=10800.
+### freqout_isccp = frequence output en jours du simulateur ISCCP
+ecrit_ISCCP=_ecrit-ISCCP_
+### niveau du diagnostique de conservation d energie
+if_ebil=0
+#
+# parametres KE
+#
+### epmax = Efficacite precipitation maximale
+epmax = .999
+### ok_adj_ema = ?? pas utilise
+ok_adj_ema = n
+### iflag_clw Flag calcul eau liquide
+# - iflag_clw=0 : qcond_incld(i,l) = em_qcondc(l)
+# - iflag_clw=1 : qcond_incld(i,l) = em_qcond(l)
+# - iflag_clw=2 : eau liquide diagnostique en fonction de la Precip
+iflag_clw = 1
+# 
+# parametres nuages
+#
+### cld_lc_lsc  contenu en eau liquide des nuages large-scale (fisrtilp) 
+cld_lc_lsc = 4.16e-4
+### cld_lc_con  contenu en eau liquide des nuages convectifs (fisrtilp) 
+cld_lc_con = 4.16e-4
+### cld_tau_lsc cte de temps utilisee pour eliminer l eau large-scale (fisrtilp) 
+cld_tau_lsc = 1800.
+### cld_tau_con cte de temps utilisee pour eliminer l eau convective (fisrtilp) 
+cld_tau_con = 1800.
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace large-scale (fisrtilp) 
+ffallv_lsc = 0.5
+### ffallv_lsc  cte utilisee dans calcul vitesse de chute cristaux de glace convectifs (fisrtilp) 
+ffallv_con = 0.5
+### coef_eva coef evaporation precips eau/glace (fisrtilp/fisrtilp_tr?/conlmd?)
+coef_eva = 2.e-5
+### reevap_ice  reevaporation de toute la precip dans la couche du dessous pour la glace (fisrtilp) 
+reevap_ice = y
+### iflag_cldcon  flag pour calculer ratqsc=F(ratqsbas,fact_cldcon,q_seri) (physiq) 
+# - iflag_cldcon<=-1 diag. rain_Tiedtke 
+# - iflag_cldcon=1, ratqsc=ratqsbas+fact_cldcon*(q_seri(1)-q_seri(k))/q_seri(k)
+# - iflag_cldcon=1/2, ratqs=max(ratqs,ratqsc)
+# - iflag_cldcon=3,   ratqs=ratqss
+iflag_cldcon = 3
+### iflag_pdf :  flag calcul distribution sous-maille de l eau et des nuages 
+# - iflag_pdf=0, version ratqs, 
+# - iflag_pdf=1, calcul eau condensee, fraction nuageuse, eau nuageuse a partir
+# -              des PDFS de Sandrine Bony 
+iflag_pdf = 1
+### fact_cldcon  constante calcul ratqsc (voir iflag_cldcon) et proprietes nuages convectifs, clwcon0 (physiq.F) 
+fact_cldcon = 1.
+### facttemps=   facteur de relaxation de ratqs (iflag_cldcon=1/2) et rnebcon (iflag_cldcon=3)
+facttemps = 0.
+## ok_newmicro   =y appel newmicro , =n appel nuage (calcul epaisseur optique et emmissivite des nuages) 
+ok_newmicro = y
+### iflag_ratqs=0 correspond a la version IPCC AR4 
+iflag_ratqs=0
+### ratqsbas     ratqs en bas si iflag_cldcon=1 
+ratqsbas = 0.005
+### ratqshaut    ratqs en haut pour ratqss "stables"  
+ratqshaut = 0.33
+### rad_froid    rayon cristaux des nuages de glace "froids" 
+rad_froid = 35
+### rad_chau1    rayon goutelettes d eau chauds", en haut: k=4-klev 
+rad_chau1=12
+### rad_chau2    rayon goutelettes d eau chauds", en bas: k=1-3  
+rad_chau2=11
+# 
+# Coefficient et parametres sur les drags
+#
+f_cdrag_ter=1.
+f_cdrag_stable=1.
+f_cdrag_oce=0.8
+f_rugoro=0.
+### ksta_ter      coef.diffusion minimale sur terre/sic/lic 
+ksta_ter=1.e-7
+### cdmmax =     cdrag maximum pour le moment
+cdmmax = 2.5E-3
+### cdhmax =     cdrag maximum pour l energie
+cdhmax = 2.0E-3
+#
+# Parametres "orbitaux/ ere geologique"
+#
+### R_ecc =      Excentricite
+R_ecc = 0.016715
+### R_peri =     Equinoxe
+R_peri = 102.7
+### R_incl =     Inclinaison
+R_incl = 23.441
+### solaire =    Constante solaire
+solaire = 1365.6537
+#
+# Taux gaz a effet de serre
+#
+### co2_ppm =    taux CO2 en ppm
+co2_ppm = 0.28472500E+03
+### CH4_ppb =    taux CH4 en ppb
+CH4_ppb = 0.79097924E+03
+### N2O_ppb =    taux N2O en ppb
+N2O_ppb = 0.27542506E+03
+### CFC11_ppt =  taux CFC11 en ppt
+CFC11_ppt = 0.
+### CFC12_ppt =  taux CFC12 en ppt
+CFC12_ppt = 0.
+#
+# Parametres effets directs/indirects des "aerosols"
+#
+### ok_ade=y/n   flag Aerosol direct effect
+ok_ade=y
+### ok_aie=y/n   flag Aerosol indirect effect
+ok_aie=y
+### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
+aer_type=preind
+###  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only =5 => dust only =6 => all aerosol
+flag_aerosol=6 
+### bl95_b0 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b0=1.7
+### bl95_b1 =    Parameter in CDNC-maer link (Boucher&Lohmann 1995)
+bl95_b1=0.2
+#
+# Parametre de lecture de l'ozone
+#
+# Allowed values are 0, 1 and 2
+# 0: do not read an ozone climatology
+# 1: read a single ozone climatology that will be used day and night
+# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
+read_climoz=2
+#
+# Parametres simulateur COSP (CFMIP Observational Simulator Package)
+#
+### ok_cosp=y/n flag simulateur COSP
+ok_cosp=n
+### freq_COSP = frequence d'appel de COSP en secondes
+freq_COSP=10800.
+### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
+ok_mensuelCOSP=y
+### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
+ok_journeCOSP=y
+### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
+ok_hfCOSP=n
+#
+# Parametres simulateur ISCCP
+#
+### ok_isccp=y/n flag simulateur ISCCP
+ok_isccp=n
+### top_height = flag choix calcul nuages par le simulateur en utilisant 
+# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
+# - top_height = 1 -> algo IR-VIS
+# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
+# - top_height = 3 -> algo IR
+top_height = 1
+### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
+# - overlap=1    Max overlap
+# - overlap=2    Random overlap
+# - overlap=3    Max/Random overlap
+overlap = 3
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/run.def
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/run.def	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/run.def	(revision 1950)
@@ -0,0 +1,42 @@
+# $Id$
+#
+INCLUDEDEF=physiq.def
+INCLUDEDEF=gcm.def
+INCLUDEDEF=orchidee.def
+## Type de calendrier utilise
+## valeur possible: earth_360d (defaut), earth_365d, earth_366d
+calend=_calend_
+## Jour de l etat initial ( = 350  si 20 Decembre ,par expl. ,comme ici )
+dayref=_dayref_
+##  Annee de l etat  initial (   avec  4  chiffres   )
+anneeref=_anneeref_
+## Nombre de jours d integration
+nday=_nday_
+## Remise a zero de la date initiale
+raz_date=_raz_date_
+## periode de sortie des variables de controle (en pas)
+iconser=240
+## periode d ecriture du fichier histoire (en jour)
+iecri=1
+## flag de sortie dynzon
+ok_dynzon=n
+## periode de stockage fichier dynzon (en jour)
+periodav=_periodav_
+## activation du calcul d equilibrage de charge
+adjust=_adjust_
+## activation du filtre fft
+use_filtre_fft=y
+## niveau d impression de controle
+prt_level=0
+###
+### Informations sur la configuration utilisee
+###
+### type_ocean = force / slab  /couple
+type_ocean=couple
+### version_ocean = nemo / opa8
+version_ocean=nemo
+### activation passage courants surface ocean-glace
+cpl_current=y
+### VEGET= y si ORCHIDEE, =n si bucket
+VEGET=y
+
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/traceur.def
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/traceur.def	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/traceur.def	(revision 1950)
@@ -0,0 +1,4 @@
+3
+14 14 H2Ov
+10 10 H2Ol
+10 10 Aga
Index: /CMIP5/historicalAA/v3.historicalAA1/PARAM/xmlio_server.def
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/PARAM/xmlio_server.def	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/PARAM/xmlio_server.def	(revision 1950)
@@ -0,0 +1,18 @@
+! xmlio_server namelist
+!
+! using_server: .TRUE.(.FALSE.) to use(bypass) the io_server
+! using_oasis : .TRUE.(.FALSE.) if nemo is coupled through OASIS
+! client_id   : used only for OASIS, NEMO      id in the namecouple
+! server_id   : used only for OASIS, io_server id in the namecouple
+!
+&coupling_param
+  using_server = .FALSE.
+  using_oasis  = .TRUE.
+  client_id    = 'oceanx'
+  server_id    = 'ionemo'
+/
+
+! global_mpi_buffer_size: size in Mo of the MPI buffer used by the io_server
+&mpi_param
+  global_mpi_buffer_size = 512
+/
Index: /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_lim2.cfg
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_lim2.cfg	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_lim2.cfg	(revision 1950)
@@ -0,0 +1,50 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=D4E3E6
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ iicethic_north  | "iicethic ileadfra"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (NORTH)"      | "m" | "if lat[d=3] ge 0 and ileadfra[d=2] ne 0 then ileadfra[d=2]*mask[k=1,d=3]*area[d=3]"
+ iicethic_south  | "iicethic ileadfra"  | ORCA2.3_grid.nc | "(iicethic[d=1])" | "Ice thickness (SOUTH)"      | "m" | "if lat[d=3] le 0 and ileadfra[d=2] ne 0 then ileadfra[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_north  | "isnowthi ileadfra"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (NORTH)"     | "m" | "if lat[d=3] ge 0 and ileadfra[d=2] ne 0 then ileadfra[d=2]*mask[k=1,d=3]*area[d=3]"
+ isnowthi_south  | "isnowthi ileadfra"  | ORCA2.3_grid.nc | "(isnowthi[d=1])" | "Snow thickness (SOUTH)"     | "m" | "if lat[d=3] le 0 and ileadfra[d=2] ne 0 then ileadfra[d=2]*mask[k=1,d=3]*area[d=3]"
+ icesurf_north   | "ileadfra"           | ORCA2.3_grid.nc | "(if lat[d=2] gt 0 then ileadfra[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (NORTH)"  | "m2" | "2"
+ icesurf_south   | "ileadfra"           | ORCA2.3_grid.nc | "(if lat[d=2] lt 0 then ileadfra[d=1]*area[d=2]*mask[k=1,d=2])"               | "Ice surface (SOUTH)"  | "m2" | "2"
+ icevol_north    | "ileadfra iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ileadfra[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (NORTH)"   | "m3" | "2"
+ icevol_south    | "ileadfra iicethic"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ileadfra[d=1]*iicethic[d=2]*area[d=3]*mask[k=1,d=3])" | "Ice volume (SOUTH)"   | "m3" | "2"
+ snowvol_north   | "ileadfra isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] gt 0 then ileadfra[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (NORTH)"  | "m3" | "2"
+ snowvol_south   | "ileadfra isnowthi"  | ORCA2.3_grid.nc | "(if lat[d=3] lt 0 then ileadfra[d=1]*isnowthi[d=2]*area[d=3]*mask[k=1,d=3])" | "Snow volume (SOUTH)"  | "m3" | "2"
+#-----------------------------------------------------------------------------------------------------------------
+
Index: /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_opa9.cfg
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_opa9.cfg	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_opa9.cfg	(revision 1950)
@@ -0,0 +1,67 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.1 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by '#' character
+#   - Separator between fields is '|' character
+#   - Operations must use the ferret syntax
+#   - Each variable must be referenced to its dataset ie var[d=x]
+#   - files patterns, operations,title,units must be enclosed with character '"'
+#   - fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=6D80FF
+smooth=12
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+ sosstsst_global  | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])"                                    | "Sea Surface Temperature (GLOBAL)" | "degC"  | "mask[k=1,d=2]*area[d=2]"
+ sohtc300_global  | "sohtc300"  | ORCA2.3_grid.nc | "(sohtc300[d=1])"                                    | "Heat content 300 m (GLOBAL)"      | "W"     | "mask[k=1,d=2]*area[d=2]"
+ sosaline_global  | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])"                                    | "Sea Surface Salinity (GLOBAL)"    | "PSU"   | "mask[k=1,d=2]*area[d=2]"
+ sossheig_global  | "sossheig"  | ORCA2.3_grid.nc | "(sossheig[d=1])"                                    | "Sea Surface Heigh (GLOBAL)"       | "m"     | "mask[k=1,d=2]*area[d=2]"
+ sohefldo_global  | "sohefldo"  | ORCA2.3_grid.nc | "(sohefldo[d=1])"                                    | "Net Downward Heat Flux (GLOBAL)"  | "W/m^2" | "mask[k=1,d=2]*area[d=2]"
+ nadw_ocean       | "zomsfatl"  |       ""        | "(zomsfatl[z=500:6000@max,y=10:55@max,d=1])"         | "North Atlantic Deep Water"        | "Sv"    | "1"
+ npdw_ocean       | "zomsfpac"  |       ""        | "(zomsfpac[z=500:6000@max,y=10:55@max,d=1])"         | "North Pacific Deep Water"         | "Sv"    | "1"
+ aabw_ocean       | "zomsfglo"  |       ""        | "(zomsfglo[z=2000:6000@max,y=-50:60@max,d=1])"       | "Antarctic Bottom Water"           | "Sv"    | "1"
+ deacon_ocean     | "zomsfglo"  |       ""        | "(zomsfglo[z=2000:6000@max,y=-80:-30@max,d=1])"      | "Deacon Cell"                      | "Sv"    | "1"
+ somxl010_north   | "somxl010"  | ORCA2.3_grid.nc | "(somxl010[d=1])" | "Mixed layer depth (NORTH)"         | "m"     | "(if lat[d=2] gt 0 then mask[k=1,d=2]*area[d=2])"
+ somxl010_south   | "somxl010"  | ORCA2.3_grid.nc | "(somxl010[d=1])" | "Mixed layer depth (SOUTH)"         | "m"     | "(if lat[d=2] lt 0 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_70N_90N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (70N-90N)" | "degC"  | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50N_70N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (50N-70N)" | "degC"  | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30N_50N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (30N-50N)" | "degC"  | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10N_30N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (10N-30N)" | "degC"  | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_10S_10N | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (10S-10N)" | "degC"  | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_30S_10S | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (30S-10S)" | "degC"  | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_50S_30S | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (50S-30S)" | "degC"  | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosstsst_70S_50S | "sosstsst"  | ORCA2.3_grid.nc | "(sosstsst[d=1])" | "Sea Surface Temperature (70S-50S)" | "degC"  | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70N_90N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (70N-90N)"    | "PSU"   | "(if lat[d=2] ge  70                     then mask[k=1,d=2]*area[d=2])"
+ sosaline_50N_70N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (50N-70N)"    | "PSU"   | "(if lat[d=2] ge  50 and lat[d=2] le  70 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30N_50N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (30N-50N)"    | "PSU"   | "(if lat[d=2] ge  30 and lat[d=2] le  50 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10N_30N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (10N-30N)"    | "PSU"   | "(if lat[d=2] ge  10 and lat[d=2] le  30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_10S_10N | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (10S-10N)"    | "PSU"   | "(if lat[d=2] ge -10 and lat[d=2] le  10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_30S_10S | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (30S-10S)"    | "PSU"   | "(if lat[d=2] ge -30 and lat[d=2] le -10 then mask[k=1,d=2]*area[d=2])"
+ sosaline_50S_30S | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (50S-30S)"    | "PSU"   | "(if lat[d=2] ge -50 and lat[d=2] le -30 then mask[k=1,d=2]*area[d=2])"
+ sosaline_70S_50S | "sosaline"  | ORCA2.3_grid.nc | "(sosaline[d=1])" | "Sea Surface Salinity (70S-50S)"    | "PSU"   | "(if                     lat[d=2] le -50 then mask[k=1,d=2]*area[d=2])"
+#-----------------------------------------------------------------------------------------------------------------
Index: /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_orchidee.cfg
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_orchidee.cfg	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_orchidee.cfg	(revision 1950)
@@ -0,0 +1,47 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=E7FFAB
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+temp_sol_lands | "temp_sol"         |  ""              | "temp_sol[d=1]"                    | "TSOL (LANDS)"                 | "K/d"    | "Areas[d=1]*Contfrac[d=1]"
+humidity_lands | "bqsb gqsb"        |  ""              | "(bqsb[d=1]+gqsb[d=2])"            | "Total Soil Moisture  (LANDS)" | "1"      | "Areas[d=1]*Contfrac[d=1]"
+albedo_lands   | "alb_vis alb_nir"  |  ""              | "((alb_vis[d=1]+alb_nir[d=2])*0.5)"| "Mean Albedo (LANDS)"          | "1"      | "Areas[d=1]*Contfrac[d=1]"
+snow_lands     | "snow"             |  ""              | "snow[d=1]"                        | "Snow Mass (LANDS)"            | "kg/m^2" | "Areas[d=1]*Contfrac[d=1]"
+maxveget_lands | "maxvegetfrac"     |  ""              | "maxvegetfrac[d=1,K=12:13]"        | "vegetmax[pft=12,13] (LANDS)"  | "1"      | "2"
+nee_lands      | "nee maxvegetfrac" |  ""              | "(nee[d=1]*365*86400*maxvegetfrac[d=2]*Areas[d=1]*Contfrac[d=1]/1e15)"  | "Net Ecosystem Exchange"    | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
Index: /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_stomate.cfg
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_stomate.cfg	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/POST/monitoring01_stomate.cfg	(revision 1950)
@@ -0,0 +1,51 @@
+#**************************************************************
+# Author: Patrick Brockmann
+# Contact: Patrick.Brockmann@cea.fr
+# $Date: 2009/05/14 15:09:35 $
+# $Name: ATLAS_608_1_5 $
+# $Revision: 1.1.1.2 $
+# History:
+# Modification:
+#**************************************************************
+
+##################################################################################################################
+#-----------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#-----------------------------------------------------------------------------------------------------------------
+#
+#   field = name of the field to monitore 
+#   files patterns = pattern of the files used to monitore the field (must be discriminant) 
+#   files additionnal = additionnal files accessible by $FER_DATA
+#   operations = operations to calculate the field 
+#   title = variable title
+#   units = variable units
+#   calcul of area = expression to use for the weight average
+#
+# Notes:
+#   - Comment lines begin by # character.
+#   - Separator between fields is | character.
+#   - Operations must use the ferret syntax, if several files are used precise with the syntax d=x to refer to the x dataset.
+#     They must be enclosed by parenthesis if more than one variable is used.
+#   - files patterns,files additionnal,operations,title,units must be enclosed with character ". 
+#     Use "" if empty.
+#   - Fields will be presented through an html page with thumbnails global, north, south, land, ocean.
+#     Use a field name with one of these pattern to display it under the corresponding thumbnail.
+#
+##################################################################################################################
+
+color=EEE8AA
+smooth=12
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+#  field | files patterns | files additionnal | operations | title | units | calcul of area
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+fLuc_fHarvest_lands | "CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE CONTFRAC"  | "" | "((CONVFLUX[d=1]+CFLUX_PROD10[d=2]+CFLUX_PROD100[d=3]+HARVEST_ABOVE[d=4])*AREAS[d=1]*CONTFRAC[d=5]*365/1e15)"                           | "CO2 flux from Land Use Change and Crop Harvesting"            | "PgC/yr" | "2"
+fHarvest_lands      | "HARVEST_ABOVE CONTFRAC"                                      | "" | "((HARVEST_ABOVE[d=1])*AREAS[d=1]*CONTFRAC[d=2]*365/1e15)"                           | "CO2 flux from Land Use Change and Crop Harvesting"            | "PgC/yr" | "2"
+nbp_lands           | "CO2FLUX_MONTHLY VEGET_MAX CONVFLUX CFLUX_PROD10 CFLUX_PROD100 HARVEST_ABOVE CONTFRAC" | "" | "(((CO2FLUX_MONTHLY[d=1]*12*VEGET_MAX[d=2])+(CONVFLUX[d=3]+CFLUX_PROD10[d=4]+CFLUX_PROD100[d=5]+HARVEST_ABOVE[d=6]*365))*AREAS[d=1]*CONTFRAC[d=7]/1e15)"                       | "Net biospheric Production"  | "PgC/yr" | "2"
+cSoil_lands         | "TOTAL_SOIL_CARB VEGET_MAX CONTFRAC" | "" | "(TOTAL_SOIL_CARB[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"     | "Carbon Soil in Pool"                                   | "PgC"    | "2"
+cVeg_lands          | "TOTAL_M VEGET_MAX CONTFRAC"         | "" | "(TOTAL_M[d=1]*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"             | "Carbon in vegetation"                                       | "PgC"    | "2"
+npp_lands           | "NPP VEGET_MAX CONTFRAC"             | "" | "(NPP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"             | "Net Primary Production"                                  | "PgC/yr" | "2"
+rh_lands            | "HET_RESP VEGET_MAX CONTFRAC"        | "" | "(HET_RESP[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"        | "Heterotrophic Respiration"                                     | "PgC/yr" | "2"
+fFire_lands         | "CO2_FIRE VEGET_MAX CONTFRAC"        | "" | "(CO2_FIRE[d=1]*365*VEGET_MAX[d=2]*AREAS[d=1]*CONTFRAC[d=3]/1e15)"        | "CO2 emission from fire"                                     | "PgC/yr" | "2"
+#------------------------------------------------------------------------------------------------------------------------------------------------------
+
+
Index: /CMIP5/historicalAA/v3.historicalAA1/README
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/README	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/README	(revision 1950)
@@ -0,0 +1,8 @@
+IPSLCM5A
+
+09/06/2010
+
+Experiment Name comes from CMIP5 DRS. See: http://cmip-pcmdi.llnl.gov/cmip5/docs/cmip5_data_reference_syntax.pdf
+Output files are stored into : login/IGCM_OUT/IPSLCM5A/DEVT/pdControl/EXP00 directory
+
+
Index: /CMIP5/historicalAA/v3.historicalAA1/config.card
===================================================================
--- /CMIP5/historicalAA/v3.historicalAA1/config.card	(revision 1950)
+++ /CMIP5/historicalAA/v3.historicalAA1/config.card	(revision 1950)
@@ -0,0 +1,206 @@
+#
+# This is config.card file for IPSLCM5A configuration
+#
+#========================================================================
+#D-- Compatibility -
+[Compatibility]
+libIGCM=1.0
+#D-- UserChoices -
+[UserChoices]
+#============================
+JobName=EXP00
+#----- Short Name of Experiment
+ExperimentName=piControl
+#----- DEVT TEST PROD
+SpaceName=DEVT
+LongName="IPSLCM5A CMIP5 DEVT phase piControl example with large outputs"
+TagName=IPSLCM5A
+#============================
+#-- leap, noleap, 360d
+CalendarType=noleap
+#-- Experiment dates : Beginning and ending
+#-- "YYYY-MM-DD"
+DateBegin=1850-01-01
+DateEnd=1850-12-31
+#============================
+#-- 1Y, 1M, 5D, 1D Period Length of one trunk of simulation
+PeriodLength=1M
+#============================
+#-- PBS Class (required on brodie mono/multi)
+#JobClass=mono
+JobClass=multi
+#============================
+#-- Total Number of Processors (minimum is 2 for a coupled configuration)
+#JobNumProcTot=2
+JobNumProcTot=4
+#============================
+#-- Run Options : here for oasis coupling
+JobRunOptions='-f'
+#-- for vargas
+#JobRunOptions='"-pgmmodel MPMD -cmdfile"'
+#============================
+# config.card configuration options :
+#R_INIT=/u/rech/psl/rpsl035/IGCM/INIT
+#R_INIT=/dmnfs/cont003/p86ipsl/IGCM/INIT
+#R_BC=/u/rech/psl/rpsl035/IGCM/BC
+#R_BC=/dmnfs/cont003/p86ipsl/IGCM/BC
+#============================
+
+#========================================================================
+#D-- Restarts -
+[Restarts]
+#D- by default: config.card describes no restart for all components 
+#D-             ie start from Levitus or limit files
+#D- If you want to restart all components from the same simulation,
+#D-      put OveRule flag to 'y' and set the next 3 parameters
+OverRule=n
+#D- Last day of the experience used as restart for all components
+RestartDate=1899-12-31
+#D- Define restart simulation name for all components
+RestartJobName=EXP00
+#D- Path Server Group Login
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+
+#========================================================================
+#D-- ATM -
+[ATM]
+#
+WriteFrequency="1M 1D HF"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+# Last day of the experience used as restart for this component if Restart=y
+RestartDate=1899-12-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+# Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- OCE -
+[OCE]
+WriteFrequency="1M 1D"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1899-12-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+# Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- ICE -
+[ICE]
+WriteFrequency="1M 1D"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1899-12-31
+# Define restart simulation name for this component
+RestartJobName=EXP00           
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+# Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- MBG -
+[MBG]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1990-12-31
+# Define restart simulation name
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+# Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- SRF -
+[SRF]
+WriteFrequency="1M HF"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1899-12-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+#-- Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- SBG - STOMATE
+[SBG]
+WriteFrequency="1M"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart=n
+#-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1899-12-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+#-- Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- CPL -
+[CPL]
+WriteFrequency="1M 1D"
+# If config_Restarts_OverRule == 'n' next 4 params are read
+Restart= n
+##-- Last day of the experience used as restart for this component if Restart=y
+RestartDate=1899-12-31
+# Define restart simulation name for this component
+RestartJobName=EXP00
+RestartPath=${ARCHIVE}/IGCM_OUT/IPSLCM5A/DEVT/piControl
+# Old component name for restart (if empty, use new name)
+OldName=
+
+#========================================================================
+#D-- ListOfComponents -
+[ListOfComponents]
+#D- For each component, Name of component, Tag of component
+ATM= (lmdz, LMDZ4-dev)
+SRF= (orchidee, ORCHIDEE_1_9_5)
+SBG= (stomate, ORCHIDEE_1_9_5)
+OCE= (opa9, CMIP5_IPSL)
+ICE= (lim2, CMIP5_IPSL)
+MBG= (pisces, CMIP5_IPSL)
+CPL= (oasis, OASIS3)
+
+#========================================================================
+#D-- Executable -
+[Executable]
+Name=run_file
+#D- For each component, Real name of executable, Name of executable for oasis
+ATM= (gcm.e, lmdz.x)
+SRF= ("", "")
+SBG= ("", "")
+OCE= (opa, opa.xx)
+ICE= ("", "")
+MBG= ("", "")
+CPL= (oasis, oasis)
+
+#========================================================================
+#D-- Post -
+[Post]
+#D- Do we rebuild parallel output, this flag determines
+#D- frequency of rebuild submission (use NONE for DRYRUN=3)
+RebuildFrequency=5Y
+#D- Do we rebuild parallel output from archive (use NONE to use SCRATCHDIR as buffer)
+RebuildFromArchive=true
+#D- If you want to produce time series, this flag determines
+#D- frequency of post-processing submission (NONE if you don't want)
+TimeSeriesFrequency=10Y
+#D- If you want to produce seasonal average, this flag determines
+#D- the period of this average (NONE if you don't want)
+SeasonalFrequency=10Y
+#D- Offset for seasonal average first start dates ; same unit as SeasonalFrequency
+#D- Usefull if you do not want to consider the first X simulation's years
+SeasonalFrequencyOffset=0
+
+#========================================================================
