1 | #- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $ |
---|
2 | [Compatibility] |
---|
3 | libIGCM=1.0 |
---|
4 | |
---|
5 | [UserChoices] |
---|
6 | #choose if input file will be regrid by xios, or read without regrid with netcdf |
---|
7 | xios_read=y |
---|
8 | # Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n) |
---|
9 | LMDZ_10m_winds=y |
---|
10 | #coupled model with ORCH |
---|
11 | #if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card |
---|
12 | CoupOrchInca=n |
---|
13 | #active or not chemistry flux in output |
---|
14 | calcul_flux=n |
---|
15 | #choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft) |
---|
16 | flag_plane=1 |
---|
17 | #choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation) |
---|
18 | #be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc) |
---|
19 | emi_interp_time=1 |
---|
20 | |
---|
21 | # Specify output frequency for output files |
---|
22 | # you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it |
---|
23 | # if you choose 1d the file will be store in CHM/Output/DA |
---|
24 | # if you choose 1mo the file will be store in CHM/Output/MO |
---|
25 | # if you choose another frequency, the file will be store in CHM/Output/DA by default |
---|
26 | output_frequency_ges=1d |
---|
27 | |
---|
28 | |
---|
29 | [InitialStateFiles] |
---|
30 | List= () |
---|
31 | |
---|
32 | |
---|
33 | [BoundaryFiles] |
---|
34 | List=(${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/ANT/sflx_lmdz_ANT_${year}_dyn.nc, sflx_ANT_LR.nc ),\ |
---|
35 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/BBG/sflx_lmdz_BBG_${year}_dyn.nc, sflx_BBG_LR.nc ),\ |
---|
36 | (${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc , aircraft_mth.nc ),\ |
---|
37 | (${R_IN}/CHM/IPCC_AR6/OXYDANTS/${RESOL_CHM}_yearly_interpolated/oxydants_${year}.nc, oxydants.nc ) |
---|
38 | |
---|
39 | |
---|
40 | ListNonDel= (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_GHG_dyn.nc , sflx_GHG_LR.nc ),\ |
---|
41 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_MISC_dyn.nc , sflx_MISC_LR.nc ),\ |
---|
42 | (${R_IN}/CHM/IPCC_AR6/SFLX/VERS3/${RESOL_CHM}/sflx_lmdz_NAT_dyn.nc , sflx_NAT_LR.nc ),\ |
---|
43 | (${R_IN}/CHM/IPCC_AR6/lglived_CMIP6.dat , lglived.dat ),\ |
---|
44 | (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc , landuse.nc ),\ |
---|
45 | (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc , npp.nc ),\ |
---|
46 | (${R_IN}/CHM/INCA9695-L39/co2_carbonator.nc , co2_carbonator.nc ),\ |
---|
47 | (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat , phototable.dat ) |
---|
48 | |
---|
49 | |
---|
50 | # co2_carbonator file with 1 degre resolution - to be used for CO2 studies |
---|
51 | # (${R_IN}/CHM/FILES_LONxLAT/co2_carbonator_1deg.nc , co2_carbonator.nc ),\ |
---|
52 | |
---|
53 | |
---|
54 | [ParametersFiles] |
---|
55 | List= (${SUBMIT_DIR}/PARAM/INCA/inca.def, .),\ |
---|
56 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml , . ),\ |
---|
57 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml , . ),\ |
---|
58 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_oxydants_inca.xml , . ),\ |
---|
59 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_GES_inca.xml, context_start_inca.xml ),\ |
---|
60 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_co2_inca.xml , . ),\ |
---|
61 | (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml , . ),\ |
---|
62 | (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml , . ),\ |
---|
63 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml , file_def_inca_restart.xml ),\ |
---|
64 | (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_GES.xml , file_def_inca.xml ),\ |
---|
65 | (${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat) |
---|
66 | |
---|
67 | |
---|
68 | |
---|
69 | [RestartFiles] |
---|
70 | # List restart that have to be saved/restored each loop (file out, saved, and in) : |
---|
71 | List= (chem_restart.nc, chem_restart.nc, chem_start.nc) |
---|
72 | |
---|
73 | |
---|
74 | |
---|
75 | [OutputText] |
---|
76 | List=(inca.out, inca.def,context_inca.xml,field_def_inca.xml,file_def_inca.xml, inca_IDxml.out) |
---|
77 | |
---|
78 | [OutputFiles] |
---|
79 | List= (inca1d_ges.nc, ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_ges.nc, Post_1D_inca_ges ),\ |
---|
80 | (inca1mo_ges.nc, ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_ges.nc, NONE ),\ |
---|
81 | (mmr_ce0l_ico.nc , ${R_OUT_CHM_O_D}/${PREFIX}_1D_mmr_ce0l_ico.nc , NONE) |
---|
82 | |
---|
83 | |
---|
84 | |
---|
85 | |
---|
86 | [Post_1D_inca_ges] |
---|
87 | Patches= () |
---|
88 | GatherWithInternal = (lon, lat, presnivs, , time_centered, time_centered_bounds, time_counter, area) |
---|
89 | TimeSeriesVars2D = () |
---|
90 | ChunckJob2D = NONE |
---|
91 | TimeSeriesVars3D = (vmrch4,vmrco,vmrco2oc,vmrco2bim,vmrco2bih,jn2o,jmcf) |
---|
92 | ChunckJob3D = NONE |
---|
93 | Seasonal=OFF |
---|