source: CONFIG/UNIFORM/v6/LMDZORINCA_v6.2/EXPERIMENTS/LMDZORINCA/NMHC/COMP/inca.card.xios @ 6849

Last change on this file since 6849 was 6849, checked in by acosce, 5 weeks ago

modify name of inca output file veget.nc in coupling.nc

File size: 5.5 KB
Line 
1#- $Id: inca.card 70 2007-06-21 14:20:42Z acosce $
2[Compatibility]
3libIGCM=1.0
4
5[UserChoices]
6xios_read=y
7# Set LMDZ_10m_winds to choose if the simulation will use online 10m wind (=y) or offline (=n)
8LMDZ_10m_winds=y
9# heat fluxes computed with feedback corresponding to 0 --> no aerosol effects, 1--> aerosol effects selected by ok_ade, ok_aie
10feedb=0
11#coupled model with ORCH
12#if yes, you need to put to CHEMISTRY_BVOC=y in orchidee.def and decomment lines for fertilizer and bbg in orchidee.card
13CoupOrchInca=n
14#active or not chemistry flux in output
15calcul_flux=y
16#choose which type of aircraft you will use (0 - 1 - 2 - 3) (no aircraft / old inca aircraft / new subsonic inca aircraft / subsonic + hypersonic inca aircraft)
17flag_plane=1
18#choose which time interpolation you want to interpolate sflx file. ( 0 - 1) (no interpolation / point to point interpolation)
19#be careful name of sflx file change with the choice of emi_interp_time ( no file / sflx_p2p.nc)
20emi_interp_time=1
21
22
23
24# Specify output frequency for output files
25# File inca_oxydants will be systematically write in output with a monthly frequency - you cannot manage it from this card
26# for other files you can choose the frequency 1d (daily), 1mo (monthly), other (1ts, 5d, etc.) or NONE if to deactivate it
27# if you choose 1d the file will be store in CHM/Output/DA
28# if you choose 1mo the file will be store in CHM/Output/MO
29# if you choose another frequency, the file will be store in CHM/Output/DA by default
30output_frequency_chem=1d
31output_frequency_emi=1d
32output_frequency_species=1d
33output_frequency_dep=1d
34output_frequency_washrate=NONE
35output_frequency_coupling=NONE
36output_frequency_reacflux=NONE
37output_frequency_phtrate=NONE
38output_frequency_invariants=NONE
39
40
41[InitialStateFiles]
42List= ()
43
44
45[BoundaryFiles]
46List=(${R_IN}/CHM/IPCC_AR6/AIRCRAFT/${RESOL_CHM}/aircraft_${year}_phy.nc           ,   aircraft_mth.nc     )
47
48ListNonDel= (${R_IN}/CHM/FILES_LONxLAT/landuse_lmdz_dyn.nc                  ,   landuse.nc      )\
49            (${R_IN}/CHM/FILES_LONxLAT/npp_dyn.nc                           ,   npp.nc          )\
50            (${R_IN}/CHM/INCA${RESOL_CHM}/o3clim.nc                         ,   o3clim.nc       )\
51            (${R_IN}/CHM/INCA${RESOL_CHM}/so4.nc                            ,   so4.nc          )\
52            (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/ANT/sflx_lmdz_ANT_2000_dyn.nc,   sflx_ANT_LR.nc ),\
53            (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/BBG/sflx_lmdz_BBG_2000_dyn.nc,   sflx_BBG_LR.nc ),\
54            (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_GHG_dyn.nc ,   sflx_GHG_LR.nc     )\
55            (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_NAT_dyn.nc ,   sflx_NAT_LR.nc     )\
56            (/ccc/work/cont003/igcmg/igcmg/IGCM/CHM/IPCC_AR6/SFLX/VERS3/144142-L79/sflx_lmdz_MISC_dyn.nc ,   sflx_MISC_LR.nc    )\
57            (${R_IN}/CHM/INCA${RESOL_CHM}/new_phototable.dat                ,   phototable.dat  )
58
59
60
61[ParametersFiles]
62List=   (${SUBMIT_DIR}/PARAM/inca.def, .),\
63        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_inca.xml, .)   ,\
64        (${MODIPSL}/modeles/INCA/src/INCA_XML/field_def_inca.xml, .) ,\
65        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_NMHC.xml, file_def_inca.xml), \
66        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_input_inca.xml, .)   ,\
67        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_sflx_inca.xml, .)   ,\
68        (${MODIPSL}/modeles/INCA/src/INCA_XML/file_def_inca_restart.xml, file_def_inca_restart.xml ), \
69        (${MODIPSL}/modeles/INCA/src/INCA_XML/context_start_NMHC_inca.xml   , context_start_inca.xml    ),\
70        (${MODIPSL}/bin/inca_${ConfChem}.dat, inca.dat)
71
72
73[RestartFiles]
74# List restart that have to be saved/restored each loop (file out, saved, and in) :
75List= (chem_restart.nc, chem_restart.nc, chem_start.nc)
76
77
78[OutputText]
79List=(inca.out, inca.def,context_inca.xml,context_start_inca.xml, iodef.xml, field_def_inca.xml,file_def_inca.xml, inca_IDxml.out)
80
81[OutputFiles]
82 List=  (inca1d_emi.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_emi.nc     ,    NONE  ),\
83        (inca1d_species.nc ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_species.nc ,    Post_1D_inca_species  ),\
84        (inca1d_dep.nc     ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_dep.nc     ,    NONE  ),\
85        (inca1d_chem.nc    ,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_chem.nc    ,    Post_1D_inca_chem  ),\
86        (inca1d_reacflux.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_reacflux.nc,    NONE  ),\
87        (inca1d_washrate.nc,      ${R_OUT_CHM_O_D}/${PREFIX}_1D_inca_washrate.nc,    NONE  ),\
88        (inca1mo_emi.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_emi.nc     ,    NONE  ),\
89        (inca1mo_species.nc ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_species.nc ,    NONE  ),\
90        (inca1mo_dep.nc     ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_dep.nc     ,    NONE  ),\
91        (inca1mo_chem.nc    ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_chem.nc    ,    NONE  ),\
92        (inca1mo_reacflux.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_reacflux.nc,    NONE  ),\
93        (inca1mo_washrate.nc,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_washrate.nc,    NONE  ),\
94        (inca_oxydants.nc       ,      ${R_OUT_CHM_O_M}/${PREFIX}_1M_inca_oxydants.nc   ,  NONE  )
95
96
97
98[Post_1D_inca_species]
99Patches= ()
100GatherWithInternal = (lon, lat, presnivs, time_centered, time_centered_bounds,time_counter, area)
101TimeSeriesVars2D = ()
102ChunckJob2D = NONE
103TimeSeriesVars3D = (vmrno,vmrno2,vmro3,vmrch4,vmrco,vmrno3, vmrhno3)
104ChunckJob3D = NONE
105Seasonal=OFF
106
107
108[Post_1D_inca_chem]
109Patches= ()
110GatherWithInternal = (lon, lat, presnivs,time_centered, time_centered_bounds, time_counter, area)
111TimeSeriesVars2D = (colo3, colco, colno2, colch2o, colch4, colhno2, coloh, colso2)
112ChunckJob2D = NONE
113TimeSeriesVars3D = ()
114ChunckJob3D = NONE
115Seasonal=OFF
116
Note: See TracBrowser for help on using the repository browser.