source: CONFIG/UNIFORM/v6/LMDZISO_v6.4/EXPERIMENTS/LMDZISO/amip/COMP/lmdz.card @ 6597

Last change on this file since 6597 was 6597, checked in by snguyen, 11 months ago

import LMDZISO_v6.4
File size: 14.8 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5# Physics package to use :
6# LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources
7# LMDZ_Physics=NPv3.2 for an early version of the new physics, to be used with LMDZ5/trunk revision 1554 or later
8# LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later
9# LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later
10# LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later
11# LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later
12# LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224
13# LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301
14# LMDZ_Physics=NPv6.1.3 as NPv6.1 but allows tau_gl to be modified
15# LMDZ_Physics=NPv6.2 as used in QUEST CMIP6 simulations
16LMDZ_Physics=NPv6.3
17
18# Set the variable CREATE needed further below to find the initial and boundary condition files.
19CREATE=ELI-${RESOL_ATM_3D}
20
21# Set ConfType to choose parameters for aerosols, solar and green house gazes.
22# The parameter file PARAM/config.def_$ConfType will be used.
23# ConfType=preind/actuel/annuel
24ConfType=actuel
25
26# Manage radiative aerosol effect and ozone
27flag_aerosol=6
28flag_aerosol_strat=0
29ok_ade=y
30ok_aie=y
31aerosol_couple=n
32read_climoz=0
33ok_cdnc=y
34
35##  Facteur additif pour l albedo
36pmagic=0.008
37
38# Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst)
39tau_gl=2.
40
41# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
42ByPass_hgardfou_teta=n
43
44# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
45ByPass_hgardfou_mats=n
46
47# Nugding : ok_guide=y/n
48# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
49ok_guide=n
50
51# Specify which output file to activate and at which output_level
52# Use an integer to specify the output level or NONE if to deactivate the file
53# output_level_filename=1     : activate the corresponding file with low output level
54# output_level_filename=10    : activate the corresponding file with high output level
55# output_level_filename=NONE  : the file will not be written
56output_level_histmth = 10
57output_level_histday = 10
58output_level_histhf  = NONE
59output_level_histmthNMC = NONE
60output_level_histdayNMC = NONE
61output_level_histhfNMC  = NONE
62output_level_histstrataer = NONE
63output_level_histdaystrataer = NONE
64output_level_histstn      = NONE
65
66# Activate COSP in config.def and set corresponding output files
67LMDZ_COSP_OK=n
68output_level_histmthCOSP = NONE
69output_level_histdayCOSP = NONE
70output_level_histhfCOSP  = NONE
71
72[InitialStateFiles]
73List=   ($R_IN/RESTART/LMDZISO/TEST/amip2015/RT_ISO/ATM/Restart/start.201501.nc,   start.nc),\
74        ($R_IN/RESTART/LMDZISO/TEST/amip2015/RT_ISO/ATM/Restart/startphy.201501.nc, startphy.nc)
75
76#List=   (${ARCHIVE}/IGCM_OUT/LMDZ/${CREATE}/ATM/Output/Restart/${CREATE}_${year}_start.nc,    start.nc),\
77#        (${ARCHIVE}/IGCM_OUT/LMDZ/${CREATE}/ATM/Output/Restart/${CREATE}_${year}_startphy.nc, startphy.nc)
78
79#(${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\
80#(${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/startphy_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc)
81
82[BoundaryFiles]
83# With CMIP6 aerosols version 1
84List=   ($R_IN/ATM/LIMIT/LMDZISO/RT_ISO/limit.${year}.nc, limit.nc)
85
86#list=   (${archive}/igcm_out/lmdz/${create}/atm/output/boundary/${create}_${year}_limit.nc, limit.nc)
87#        (${R_IN}/ATM/LIMIT/AMIP.v20180427/interpol/${RESOL_ATM_XY}_eORCA1.2_gregorian/limit_${year}.nc, limit.nc),\
88#        (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols${year}_from_inca.nc,              aerosols${year}.nc),\
89#        (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_${year}.nc, climoz_LMDZ.nc),\
90#        (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc,        solarforcing.nc),\
91#        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc),\
92#        (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc)
93
94# Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n)
95# Add the following file for LMDZ_Physics=AP (${R_IN}/ATM/IPCC_AR5/HISTORIQUE/SOLARANDVOLCANOES_1610_2008.txt, SOLARANDVOLCANOES.txt)
96ListNonDel= ($R_IN/ATM/LIMIT/LMDZISO/RT_ISO/aerosols.clim.nc, aerosols1980.nc) , \
97            ($R_IN/ATM/LIMIT/LMDZISO/RT_ISO/aerosols.clim.nc, aerosols2015.nc) , \
98            ($R_IN/ATM/LIMIT/LMDZISO/RT_ISO/aerosols.nat.nc, aerosols.nat.nc)
99
100#ListNonDel= (/ccc/work/cont003/gen2212/nguyens/IGCM_IN/LMDZISO/ATM/AEROSOLS/aerosols1995_2014_ensavg_from_inca.nc, aerosols1980.nc) , \
101#            (/ccc/work/cont003/gen2212/nguyens/IGCM_IN/LMDZISO/ATM/AEROSOLS/aerosols1995_2014_ensavg_from_inca.nc, aerosols2000.nc) , \
102#            (/ccc/work/cont003/gen2212/nguyens/IGCM_IN/LMDZISO/ATM/AEROSOLS/aerosols1995_2014_ensavg_from_inca.nc, aerosols.nat.nc)
103
104#            (${R_IN}/ATM/GHG/CMIP6/historical/CO2_CMIP6_0000_2014.txt, CO2.txt),\
105#            (${R_IN}/ATM/GHG/CMIP6/historical/CH4_CMIP6_0000_2014.txt, CH4.txt),\
106#            (${R_IN}/ATM/GHG/CMIP6/historical/N2O_CMIP6_0000_2014.txt, N2O.txt),\
107#            (${R_IN}/ATM/GHG/CMIP6/historical/CFC11eq_CMIP6_0000_2014.txt, CFC11.txt),\
108#            (${R_IN}/ATM/GHG/CMIP6/historical/CFC12eq_CMIP6_0000_2014.txt, CFC12.txt),\
109#            (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc)
110
111[SmoothFiles]
112List=   ()
113
114[ParametersFiles]
115List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}_iso, physiq.def),   \
116        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\
117        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
118        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
119        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
120        (${SUBMIT_DIR}/PARAM/config.def_${ConfType}_iso,  config.def),      \
121        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
122        (${SUBMIT_DIR}/PARAM/run.def_iso, run.def),                         \
123        (${SUBMIT_DIR}/PARAM/iso.def, .),                                   \
124        (${SUBMIT_DIR}/PARAM/isotopes_params.def, .),                       \
125        (${SUBMIT_DIR}/PARAM/tracer.def_iso, tracer.def),                   \
126        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
127        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
128        (${SUBMIT_DIR}/PARAM/field_def_lmdz_iso.xml, field_def_lmdz.xml),   \
129            (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \
130        (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz_iso.xml, file_def_histmth_lmdz.xml  ),   \
131        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
132        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
133        (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz_iso.xml, file_def_histday_lmdz.xml ),   \
134        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
135        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
136        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
137        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
138        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
139        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
140        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
141        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
142        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
143        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
144
145#(${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
146
147[RestartFiles]
148List=   (restart.nc, restart.nc, start.nc), \
149        (restartphy.nc, restartphy.nc,  startphy.nc)
150
151[OutputText]
152List=   (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
153
154[OutputFiles]
155List=   (histmth.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,       Post_1M_histmth),       \
156        (histmthCOSP.nc,   ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc,   NONE),                  \
157        (histmthNMC.nc,    ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc,    NONE),                  \
158        (histday.nc,       ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,       NONE),                  \
159        (histdayCOSP.nc,   ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc,   NONE),                  \
160        (histdayNMC.nc,    ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc,    NONE),                  \
161        (histhf.nc,        ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,        NONE),                  \
162        (histhfCOSP.nc,    ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc,    NONE),                  \
163        (histhfNMC.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc,     NONE),                  \
164        (histhf3h.nc,      ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc,      NONE),                  \
165        (histhf3hm.nc,     ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc,     NONE)
166
167[Post_1M_histmth]
168Patches= ()
169GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
170TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop)
171ChunckJob2D = 100Y
172TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
173ChunckJob3D = 100Y
174Seasonal=ON
175
176[Post_1M_histmthCOSP]
177Patches = ()
178GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire)
179TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
180ChunckJob2D = OFF
181TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
182ChunckJob3D = OFF
183Seasonal=OFF
184
185[Post_1M_histmthNMC]
186Patches = ()
187GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
188TimeSeriesVars2D = ()
189ChunckJob2D = NONE
190TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap)
191ChunckJob3D = NONE
192Seasonal=ON
193
194[Post_1D_histday]
195Patches= ()
196GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
197TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max)
198ChunckJob2D = 50Y
199TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs)
200ChunckJob3D = OFF
201Seasonal=OFF
202
203[Post_1D_histdayCOSP]
204Patches = ()
205GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds)
206TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp)
207ChunckJob2D = OFF
208TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl)
209ChunckJob3D = OFF
210Seasonal=OFF
211
212[Post_1D_histdayNMC]
213Patches = ()
214GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
215TimeSeriesVars2D = ()
216ChunckJob2D = NONE
217TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
218ChunckJob3D = 10Y
219Seasonal=OFF
220
221[Post_HF_histhf]
222Patches= ()
223GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
224TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m)
225ChunckJob2D = 50Y
226TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv)
227ChunckJob3D = OFF
228Seasonal=OFF
229
230[Post_HF_histhfCOSP]
231Patches = ()
232GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds)
233TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso)
234ChunckJob2D = OFF
235TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15)
236ChunckJob3D = OFF
237Seasonal=OFF
238
239[Post_HF_histhfNMC]
240Patches = ()
241GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds)
242TimeSeriesVars2D = ()
243ChunckJob2D = NONE
244TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap)
245ChunckJob3D = 10Y
246Seasonal=OFF
247
248[Post_3H_histhf3hm]
249Patches= ()
250GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
251TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th)
252ChunckJob2D = OFF
253TimeSeriesVars3D = ()
254ChunckJob3D = OFF
255Seasonal=OFF
256
257[Post_3H_histhf3h]
258Patches= ()
259GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds)
260TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol)
261ChunckJob2D = OFF
262TimeSeriesVars3D = ()
263ChunckJob3D = OFF
264Seasonal=OFF
Note: See TracBrowser for help on using the repository browser.