source: CONFIG/UNIFORM/v6/IPSLCM6.3/EXPERIMENTS/IPSLESM/GES/piControl_GES_CoupOceAtm_TEST/COMP/lmdz.card @ 6631

Last change on this file since 6631 was 6631, checked in by acosce, 9 months ago

switch from NPv6.1 to NPv6.2
  • Property svn:mime-type set to application/x-wine-extension-ini
File size: 6.8 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5# Physics package to use :
6LMDZ_Physics=NPv6.2
7
8# Activate the call to phytrac to run tracer simulation
9iflag_phytrac=1
10# desactivate aerosol_strato in lmdz
11flag_aerosol_strat=0
12
13# Use XIOS as output library
14XIOS=y
15
16# Set the variable CREATE needed further below to find the initial and boundary condition files.
17CREATE=ELC-${RESOL_ATM_3D}
18
19# ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only
20ByPass_hgardfou_teta=n
21
22# ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only
23ByPass_hgardfou_mats=n
24
25# Set ConfType to choose parameters for aerosols, solar and green house gazes.
26# The parameter file PARAM/config.def_$ConfType will be used.
27# ConfType=preind/actuel/annuel
28ConfType=preind
29
30# Set pmagic in config.def
31pmagic=0.0
32
33# Manage radiative aerosol effect and ozone
34flag_aerosol=0
35ok_ade=n
36ok_aie=n
37aerosol_couple=n
38read_climoz=0
39ok_cdnc=n
40
41carbon_cycle_cpl=y
42carbon_cycle_tr=n
43carbon_cycle_rad=n
44
45# Nugding : ok_guide=y/n
46# If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below.
47ok_guide=n
48
49# Specify which output file to activate and at which output_level
50# Use an integer to specify the output level or NONE if to deactivate the file
51# output_level_filename=1     : activate the corresponding file with low output level
52# output_level_filename=10    : activate the corresponding file with high output level
53# output_level_filename=NONE  : the file will not be written
54output_level_histmth = 5
55output_level_histday = NONE
56output_level_histhf  = NONE
57output_level_histmthNMC = NONE
58output_level_histdayNMC = NONE
59output_level_histhfNMC  = NONE
60output_level_histstrataer = NONE
61output_level_histdaystrataer = NONE
62output_level_histstn      = NONE
63
64# Activate COSP in config.def and set corresponding output files
65LMDZ_COSP_OK=n
66output_level_histmthCOSP = NONE
67output_level_histdayCOSP = NONE
68output_level_histhfCOSP  = NONE
69
70[InitialStateFiles]
71List=   (${R_IN}/CHM/INCA144142-L79/start_NAS_H2O.nc    , start.nc),\
72        (${R_IN}/CHM/INCA144142-L79/startphy_o2a_noTer.nc       , startphy.nc)
73
74[BoundaryFiles]
75List=   ()
76#
77# With CMIP6 aerosols version 1
78# With 3D ozone
79ListNonDel= (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_piControl_ave_6bands_366days.nc, solarforcing.nc),\
80            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc),\
81            (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc),\
82            (${R_IN}/ATM/GHG/CO2_EMISSION/v1/144x142/flux_1D_CO2_2014.nc, sflx_lmdz_co2_ff.nc),\           
83            (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc)
84
85[SmoothFiles]
86List=   ()
87
88[ParametersFiles]
89List=   (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),       \
90        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def), \
91        (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z},   vert.def),         \
92        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .),            \
93        (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .),           \
94        (${SUBMIT_DIR}/PARAM/config.def_${ConfType},  config.def),          \
95        (${SUBMIT_DIR}/PARAM/guide.def, .),                                 \
96        (${SUBMIT_DIR}/PARAM/run.def, .),                                   \
97        (${MODIPSL}/bin/tracer_${ConfChem}.def, tracer.def),                \
98        (${SUBMIT_DIR}/PARAM/iodef.xml, . ),                                \
99        (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ),                \
100        (${MODIPSL}/modeles/LMDZ/DefLists/context_lmdz.xml, . ),            \
101        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_lmdz.xml, . ),          \
102        (${MODIPSL}/modeles/LMDZ/DefLists/field_def_cosp1.xml, . ),         \
103        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmth_lmdz.xml, . ),   \
104        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
105        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\
106        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ),   \
107        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
108        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\
109        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ),    \
110        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \
111        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \
112        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ),   \
113        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ),   \
114        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\
115        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdaystrataer_lmdz.xml, . ),\
116        (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . )
117
118
119
120[RestartFiles]
121List=   (restart.nc, restart.nc, start.nc), \
122        (restartphy.nc, restartphy.nc,  startphy.nc)
123
124[OutputText]
125List=   (physiq.def, gcm.def, run.def, tracer.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug_notroot.01, debug.root.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out)
126
127[OutputFiles]
128List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,   Post_1M_histmth   )       
129
130[Post_1M_histmth]
131Patches= ()
132GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire)
133TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, absvisaer, loadoa, loadbc, loadso4, loaddust, loadss, sconcoa, sconcbc, sconcso4, sconcdust, sconcss, reffclwtop, cldncl, swtoaas_ant, swtoacs_ant, swtoacf_ant, swsrfas_ant, swsrfcs_ant, swsrfcf_ant, swtoaas_nat, swtoacs_nat, swtoacf_nat, swsrfas_nat, swsrfcs_nat, swsrfcf_nat, solswai, solswad, swtoacf_zero, swsrfcf_zero)
134ChunckJob2D = 100Y
135TimeSeriesVars3D = (upwd, lwcon, iwcon, lcc3dcon, lcc3dstra, temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres, rneb, rnebcon, rhum, mc, paprs, scdnc, ec550aer, concoa, concbc, concso4, concss, concdust, reffclws, reffclwc, tnt, dtdyn, dtphy, dtlschr, tntr, tntscpbl, tnhus, dqdyn, dqvdf, tnhusscpbl, dqphy, evu, mcd)
136ChunckJob3D = 100Y
137Seasonal=ON
Note: See TracBrowser for help on using the repository browser.