source: CMIP5/1pctCO2/v2.1pctCO2MR1/COMP/lmdz.driver @ 3869

Last change on this file since 3869 was 1202, checked in by mafoipsl, 14 years ago

v2.1pctCO2MR1 CMIP5 IPSL simulation registration

  • TagName=IPSLCM5A-MR
  • card, driver and *.def fit with piControlMR1 configuration except for co2 concentration.
  • output levels are still historical output levels
File size: 9.6 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5    IGCM_debug_PushStack "LMDZ_sed"
6
7    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
8    RET=$?
9    echo "LMDZ_sed : ${1} ${2} ${3}"
10    \mv ${1}.tmp ${1}
11
12    IGCM_debug_PopStack "LMDZ_sed"
13    return $RET
14}
15
16function ATM_Initialize
17{
18    IGCM_debug_PushStack "ATM_Initialize"
19
20    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
21
22    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
23
24    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
25
26    ##-- Calendar type for LMDZ
27    case ${config_UserChoices_CalendarType} in
28        leap|gregorian)
29            CalendarTypeForLmdz=earth_366d;;
30        noleap)
31            CalendarTypeForLmdz=earth_365d;;
32        360d)
33            CalendarTypeForLmdz=earth_360d;;
34        *)
35            CalendarTypeForLmdz=earth_360d
36    esac
37
38    ##--Frequency purpose ....
39    ##--  Initialisation  ....
40    OK_instan=n
41    OK_journe=n
42    OK_mensuel=n
43    ok_hf=n
44
45    case ${config_UserChoices_PeriodLength} in
46        1Y|1y|1M|1m) OK_mensuel=y ;;
47        5D|5d|1D|1d) OK_journe=y ;;
48    esac
49
50    for frequency in ${config_ATM_WriteFrequency} ; do
51        case ${frequency} in
52            5D|5d|1D|1d) OK_journe=y ;;
53        esac
54        case ${frequency} in
55            HF|hf) 
56                ok_hf=y
57                OK_instan=y
58                ;;
59        esac
60    done
61
62    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
63    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
64    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
65
66    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
67        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
68        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
69    fi
70
71    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
72    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
73    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}
74
75    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
76    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
77    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
78    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
79    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
80
81    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
82    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
83    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
84    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
85
86    IGCM_debug_PopStack "ATM_Initialize"
87}
88
89#-----------------------------------------------------------------
90function ATM_Update
91{
92    IGCM_debug_PushStack "ATM_Update"
93
94    case ${config_UserChoices_PeriodLength} in
95        *Y|*y) 
96               LMDZ_ecrit_mth=30.
97               LMDZ_ecrit_ISCCP=30.
98               LMDZ_periodav=30.
99               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
100                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
101                  exit
102               fi
103               ;;
104        *)
105               LMDZ_ecrit_mth=${PeriodLengthInDays}.
106               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
107               LMDZ_periodav=${PeriodLengthInDays}.
108               ;;
109    esac
110
111    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
112    if [ ${CumulPeriod} -eq 1 ] ; then
113        RAZ_DATE=1
114    else
115        RAZ_DATE=0
116    fi
117
118    ## To have more variables in output files for aerosols. Parameters are set in lmdz.card
119    #if [ ${CumulPeriod}%${LMDZ_Freq_aero} -le ${LMDZ_Length_aero} ]; then
120    #   if [ ${CumulPeriod}%${LMDZ_Freq_aero} -ne 0 ]; then
121    #      lev_histmth=4
122    #   else
123    #      lev_histmth=2   
124    #   fi
125    #else
126    #   lev_histmth=2
127    #fi   
128
129    ## algo : For CumulPeriod=1 ;
130    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
131    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
132    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
133    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
134
135    if [ ${CumulPeriod} -eq 1 ] ; then
136        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
137            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
138            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
139            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
140        fi
141    fi
142
143    LMDZ_adjust=n
144    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
145
146    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
147    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
148
149    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
150
151    ## CO2 forcing for the current year
152    IPCC_CO2=`grep Annee_${year} CMIP_CO2_1850_2050.txt | awk -F= '{print $2}'` 
153    echo IPCC_CO2=${IPCC_CO2} 
154
155    ##-- For 1pctCO2 daily cosp must be output during year 121-140 ie 1970-1990
156    [ ${year} -ge 1970 ] && LMDZ_COSP_daily=y
157
158    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
159    LMDZ_sed physiq.def OK_instan   ${OK_instan}
160    LMDZ_sed physiq.def OK_journe   ${OK_journe}
161    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
162    #LMDZ_sed physiq.def lev_histmth ${lev_histmth}
163    LMDZ_sed physiq.def ok_hf       ${ok_hf}
164    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
165    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
166    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
167    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
168    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
169    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
170    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
171    LMDZ_sed physiq.def co2_ppm     ${IPCC_CO2}
172
173    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified
174
175    ## run.def parameters
176    LMDZ_sed run.def dayref   ${InitDay}
177    LMDZ_sed run.def anneeref ${InitYear}
178    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
179    LMDZ_sed run.def nday     ${PeriodLengthInDays}
180    LMDZ_sed run.def raz_date ${RAZ_DATE}
181    LMDZ_sed run.def periodav ${LMDZ_periodav}
182    LMDZ_sed run.def adjust   ${LMDZ_adjust}
183
184    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
185    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
186    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
187    if [ ${ByPass_hgardfou_teta} = y ] ; then
188        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
189        IGCM_sys_Mv gcm.def.tmp gcm.def
190        echo
191        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
192        echo
193        cat gcm.def
194        ByPass_hgardfou_teta=n
195        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
196    fi
197
198    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
199    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
200    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
201    if [ ${ByPass_hgardfou_mats} = y ] ; then
202        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
203        IGCM_sys_Mv gcm.def.tmp gcm.def
204        echo
205        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
206        echo
207        cat gcm.def
208        ByPass_hgardfou_mats=n
209        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
210    fi
211
212    if ( ${FirstInitialize} ) ; then
213
214        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
215            if [ ${DRYRUN} -le 2 ] ; then
216                ##-- suppression of ozone file construction --
217                cp physiq.def physiq.def.save
218                LMDZ_sed physiq.def read_climoz 0
219                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
220                if [ ${DRYRUN} -le 1 ] ; then
221                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
222                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
223                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
224                fi
225                IGCM_sys_Mv physiq.def.save physiq.def
226            else
227                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
228                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
229            fi
230        fi
231
232    fi
233
234    IGCM_debug_PopStack "ATM_Update"
235}
236
237#-----------------------------------
238function ATM_Finalize
239{
240    IGCM_debug_PushStack "ATM_Finalize"
241
242    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
243
244    echo FINALIZE ATM !
245
246    IGCM_debug_PopStack "ATM_Finalize"
247}
Note: See TracBrowser for help on using the repository browser.